SunGather/SunGather/config-example.yaml

inverter:
  host: 192.168.1.100                       # [Required] IP Address of the Inverter or Dongle
  # port: 502                               # [Optional] Default for modbus is 502, for http is 8082
  # slave: 0x01                             # [Optional] Default is 0x01
  # timeout: 10                             # [Optional] Default is 10
  # scan_interval: 30                       # [Optional] Default is 30
  connection: sungrow                       # [Required] options: modbus, sungrow, http
  # model: "SG7.0RT"                        # [Optional] This is autodetected on startup, only needed if detection issues or for testing
                                            # See model list here: https://github.com/bohdan-s/SunGather#supported
  # smart_meter: True                       # [Optional] Default is False, Set to true if inverter supports reading grind / house consumption
  # use_local_time: False                   # [Optional] Default False, Uses Inventer time, if try uses PC time when updating timestamps (e.g. PVOutput)
  # manual_load: False                      # [Optional] Manually calculate load total_active_power + meter_power if the inverter does not supply it
  # logging: 30                             # [Optional] 10 = Debug, 20 = Info, 30 = Warning (default), 40 = Error
  # level: 1                                # [Optional] Set the amount of information to gather
                                            # 0 = Model and Solar Generation, 
                                            # 1 (default) = Useful data, all required for exports, 
                                            # 2 everything your Inverter supports, 
                                            # 3 Everything from every register 

# If you do not want to use a export, you can either remove the whole configuration block
# or set enabled: False
exports:
  # Print Registers to console, good for debugging / troubleshooting
  - name: console         
    enabled: False                          # [Optional] Default is False

  # Runs a simple Webserver showing Config and last read registers
  # Access at http://localhost:8080 or http://[serverip]:8080
  - name: webserver 
    enabled: True                           # [Optional] Default is False
    # port: 8080                            # [Optional] Default is 8080

  # Output data to InfluxDB
  - name: influxdb
    enabled: False                          # [Optional] Default is False
    token: "xxx"                            # [Required] API Token
    url: "http://localhost:8086"            # [Optional] Default URL is http://localhost:8086
    org: "Default"                          # [Required] InfluxDB Organization
    bucket: "SunGather"                     # [Required] InfluxDB Bucket
    measurements:                           # [Required] Registers to publish to bucket
      - point: "power"
        register: daily_power_yields
      - point: "power"
        register: total_active_power
      - point: "power"
        register: load_power
      - point: "power"
        register: meter_power
      - point: "power"
        register: export_to_grid
      - point: "power"
        register: import_from_grid
      - point: "temp"
        register: internal_temperature

  # Publish Registers to MQTT / Home Assistant
  - name: mqtt
    enabled: False                          # [Optional] Default is False
    host: 192.168.1.200                     # [Required] IP or Hostname of MQTT Server 
    # port: 1883                            # [Optional] Default 1883
    # topic: "tele/inverter_{model}/SENSOR" # [Optional] Default: "tele/inverter_{model}/SENSOR", Variable {model} will be replaced with model number of inverter
    # username:                             # [Optional] Username is MQTT server requires it
    # password:                             # [Optional] Password is MQTT server requires it
    ha_discovery: True                      # [Optional] Default False, Home Assistant Discovery
    ha_topics:                              # [Optional] / [Required] ha_discovery: True, Topics to enable discovery for HA
      - name: "Daily Generation"
        sensor_type: sensor
        register: daily_power_yields
        unit: kWh
        dev_class: energy
        state_class: total_increasing
      - name: "Active Power"
        sensor_type: sensor
        register: total_active_power
        unit: W
        dev_class: power
        state_class: measurement
      - name: "Load Power"
        sensor_type: sensor
        register: load_power
        unit: W
        dev_class: power
        state_class: measurement
      - name: "Meter Power"
        sensor_type: sensor
        register: meter_power
        unit: W
        dev_class: power
        state_class: measurement
      - name: "Export to Grid"
        sensor_type: sensor
        register: export_to_grid
        unit: W
        dev_class: power
        state_class: measurement
      - name: "Import from Grid"
        sensor_type: sensor
        register: import_from_grid
        unit: W
        dev_class: power
        state_class: measurement
      - name: "Temperature"
        sensor_type: sensor
        register: internal_temperature
        unit: °C
        dev_class: temperature
        state_class: measurement
      - name: "Power State"
        sensor_type: binary_sensor
        register: run_state
        dev_class: running
        payload_on: "ON"
        payload_off: "OFF"

  # Publish Registers to PVOutput
  - name: pvoutput      
    enabled: False                          # [Optional] Default is False
    api: "xxxxx"                            # [Required] API Key, Settings > API Key
    sid: "xxxxx"                            # [Optional] System ID, Settings > Registered Systems > System ID
    rate_limit: 60                          # [Optional] Default 60, 60 for regular accounts, 300 for donation accounts
    status_interval: 5                      # [Optional] Default 5, In minutes, options are 5 ,10,15 minute intervals: https://pvoutput.org/help/live_data.html
    batch_points: 1                         # [Optional] Default 1, how many data points to batch upload, 
                                            # Time between uploads will be status_interval * batch_points. e.g. status_invterval of 5min, and batch_points of 12 will upload to PVOutput Hourly (5 * 12 = 60 mins)
    parameters:                             # [Required] v1 & v3 or v2 & v4 minimum. See: https://pvoutput.org/help/api_specification.html#power-and-energy-calculation
      - name: v1                            # Energy Generation
        register: daily_power_yields        # Solar Generated Today (Energy)
        multiple: 1000
      - name: v2                            # Power Generation
        register: total_active_power        # Current Generation (Power)
#     - name: v3                            # Energy Consumption
#       register: 
      - name: v4                            # Power Consumption
        register: load_power                # Current Home usage (Power)
      - name: v5                            # Temperature
        register: internal_temperature      # Inverter internal temperature
#     - name: v6                            # Voltage
#       register: total_active_power
      - name: c1                            # Cumulative Flag, 
        value: 1                            # If using v2/v4 set to 1
#      - name: "n"                          # Net Flag
#        value: 1
#     - name: "v7"                          # Extended Value v7 - Donation Only
#       register:
#     - name: "v8"                          # Extended Value v8 - Donation Only
#       register:
#     - name: "v9"                          # Extended Value v9 - Donation Only
#       register:
#     - name: "v10"                         # Extended Value v10 - Donation Only
#       register:
#     - name: "v11"                         # Extended Value v11 - Donation Only
#       register:
#     - name: "v12"                         # Extended Value v12 - Donation Only
#       register:
#     - name: "m1"                          # Text Message 1 - Donation Only
#       register: