diff --git a/README.md b/README.md
index ce2e580..7bbd4dd 100644
--- a/README.md
+++ b/README.md
@@ -52,7 +52,7 @@ First attempt at a library. Lots more changes and fixes to do. Contributions are
 - ~~add to Arduino Library Manager~~
 - ~~add to PlatformIO~~
 - add multiple sets of network credentials
-- allow users to customize CSS
+- ~~allow users to customize CSS~~
 
 ## Quick Start
 
@@ -179,7 +179,7 @@ void loop() {
 ```
 See example for a more complex version. [OnDemandConfigPortal](https://github.com/tzapu/WiFiManager/tree/master/examples/OnDemandConfigPortal)
 
-### Custom Parameters
+#### Custom Parameters
 You can use WiFiManager to collect more parameters than just SSID and password.
 This could be helpful for configuring stuff like MQTT host and port, [blynk](http://www.blynk.cc) or [emoncms](http://emoncms.org) tokens, just to name a few.
 **You are responsible for saving and loading these custom values.** The library just collects and displays the data for you as a convenience.
@@ -198,32 +198,63 @@ Usage scenario would be:
  ```cpp
  mqtt_server = custom_mqtt_server.getValue();
  ```  
-This feature is a lot more involved than all the others, so here are some examples to fully show how it is done
+This feature is a lot more involved than all the others, so here are some examples to fully show how it is done.
+You should also take a look at adding custom HTML to your form.
+
 - Save and load custom parameters to file system in json form [AutoConnectWithFSParameters](https://github.com/tzapu/WiFiManager/tree/master/examples/AutoConnectWithFSParameters)
 - *Save and load custom parameters to EEPROM* (not done yet)
 
+#### Custom IP Configuration
+You can set a custom IP for both AP (access point, config mode) and STA (station mode, client mode, normal project state)
 
-### Custom Access Point IP Configuration
+##### Custom Access Point IP Configuration
 This will set your captive portal to a specific IP should you need/want such a feature. Add the following snippet before `autoConnect()`
 ```cpp
 //set custom ip for portal
 wifiManager.setAPStaticIPConfig(IPAddress(10,0,1,1), IPAddress(10,0,1,1), IPAddress(255,255,255,0));
 ```
 
-### Custom Station (client) Static IP Configuration
+##### Custom Station (client) Static IP Configuration
 This will make use the specified IP configuration instead of using DHCP in station mode.
 ```cpp
 wifiManager.setSTAStaticIPConfig(IPAddress(192,168,0,99), IPAddress(192,168,0,1), IPAddress(255,255,255,0));
 ```
 There are a couple of examples in the examples folder that show you how to set a static IP and even how to configure it through the web configuration portal.
 
+#### Custom HTML, CSS, Javascript
+There are various ways in which you can inject custom HTML, CSS or Javascript into the configuration portal.
+The options are:
+- inject custom head element
+You can use this to any html bit to the head of the configuration portal. If you add a `<style>` element, bare in mind it overwrites the included css, not replaces.
+```cpp
+wifiManager.setCustomHeadElement("<style>html{filter: invert(100%); -webkit-filter: invert(100%);}</style>");
+```
+- inject a custom bit of html in the configuration form
+```cpp
+WiFiManagerParameter custom_text("<p>This is just a text paragraph</p>");
+wifiManager.addParameter(&custom_text);
+```
+- inject a custom bit of html in a configuration form element
+Just add the bit you want added as the last parameter to the custom parameter constructor.
+```cpp
+WiFiManagerParameter custom_mqtt_server("server", "mqtt server", "iot.eclipse", 40, " readonly");
+```
+
 #### Filter Networks
-If you would like to filter low signal quality networks you can tell WiFiManager to not show networks below an arbitrary quality %;
+You can filter networks based on signal quality and show/hide duplicate networks.
+
+- If you would like to filter low signal quality networks you can tell WiFiManager to not show networks below an arbitrary quality %;
 ```cpp
 wifiManager.setMinimumSignalQuality(10);
 ```
 will not show networks under 10% signal quality. If you omit the parameter it defaults to 8%;
 
+- You can also remove or show duplicate networks (default is remove).
+Use this function to show (or hide) all networks.
+```cpp
+wifiManager.setRemoveDuplicateAPs(false);
+```
+
 #### Debug
 Debug is enabled by default on Serial. To disable add before autoConnect
 ```cpp
@@ -242,7 +273,15 @@ If you connect to the created configuration Access Point but the configuration p
 If trying to connect ends up in an endless loop, try to add `setConnectTimeout(60)` before `autoConnect();`. The parameter is timeout to try connecting in seconds.
 
 ## Releases
-#### 0.10
+#### 0.11
+- a lot more reliable reconnecting to networks
+- custom html in custom parameters (for read only params)
+- custom html in custom parameter form (like labels)
+- custom head element (like custom css)
+- sort networks based on signal quality
+- remove duplicate networks
+
+##### 0.10
 - some css changes
 - bug fixes and speed improvements
 - added an alternative to waitForConnectResult() for debugging
diff --git a/library.json b/library.json
index 5c36330..5a5955f 100644
--- a/library.json
+++ b/library.json
@@ -9,5 +9,5 @@
   },
   "frameworks": "arduino",
   "platforms": "espressif",
-  "version": "0.10"
+  "version": "0.11"
 }
diff --git a/library.properties b/library.properties
index d22ee1d..6184f85 100644
--- a/library.properties
+++ b/library.properties
@@ -1,5 +1,5 @@
 name=WiFiManager
-version=0.10
+version=0.11
 author=tzapu
 maintainer=tzapu
 sentence=ESP8266 WiFi Connection manager with fallback web configuration portal