ElixirForge/firmware
1
0
Fork 0
mirror of https://github.com/alexhopeoconnor/firmware.git synced 2026-10-21 10:42:35 +10:00
Code Releases Activity

Merge remote-tracking branch 'origin/develop' into t-watch-ultra

Browse Source
This commit is contained in:
Jonathan Bennett
2026-04-27 07:53:48 -05:00
parent 293b86013f bfadf0c36a
commit 2d37a58959
149 changed files with 11841 additions and 1629 deletions
Download Patch File Download Diff File Expand all files Collapse all files
variants/esp32/m5stack_coreink/platformio.ini
+1 -1
View File
@@ -19,7 +19,7 @@ build_flags =
lib_deps =
${esp32_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
# renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
lewisxhe/SensorLib@0.3.4
lib_ignore =
variants/esp32/tbeam/variant.h
+4 -3
View File
@@ -35,9 +35,10 @@
// code)
#endif
// Leave undefined to disable our PMU IRQ handler. DO NOT ENABLE THIS because the pmuirq can cause sperious interrupts
// and waking from light sleep
// #define PMU_IRQ 35
// Voiding more warranties.
#define PMU_IRQ 35
#define PMU_POWER_BUTTON_IS_CANCEL // maps a short click of the power button to a cancel action (turning off the screen)
#define HAS_AXP192
#define GPS_UBLOX
#define GPS_RX_PIN 34
variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini
+1 -1
View File
@@ -11,7 +11,7 @@ upload_speed = 921600
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
build_unflags =
${esp32s3_base.build_unflags}
-DARDUINO_USB_MODE=1
variants/esp32s3/esp32-s3-pico/platformio.ini
+1 -1
View File
@@ -23,4 +23,4 @@ build_flags = ${esp32s3_base.build_flags}
lib_deps = ${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
variants/esp32s3/heltec_capsule_sensor_v3/variant.h
+1
View File
@@ -1,6 +1,7 @@
#define LED_POWER 33
#define LED_POWER2 34
#define EXT_PWR_DETECT 35
#define EXT_PWR_DETECT_MODE INPUT_PULLUP
#define BUTTON_PIN 18
#define BUTTON_ACTIVE_LOW false
variants/esp32s3/heltec_sensor_hub/variant.h
+1
View File
@@ -1,4 +1,5 @@
#define EXT_PWR_DETECT 20
#define EXT_PWR_DETECT_MODE INPUT_PULLUP
#define BUTTON_PIN 17
#define BUTTON_ACTIVE_LOW false
variants/esp32s3/heltec_v4/platformio.ini
+2 -2
View File
@@ -120,7 +120,7 @@ build_flags =
-D TFT_OFFSET_Y=0
-D TFT_OFFSET_ROTATION=0
-D SCREEN_ROTATE
-D SCREEN_TRANSITION_FRAMERATE=5
-D SCREEN_TRANSITION_FRAMERATE=30
-D BRIGHTNESS_DEFAULT=130 ; Medium Low Brightness
-D HAS_TOUCHSCREEN=1
-D TOUCH_I2C_PORT=0
@@ -133,4 +133,4 @@ lib_deps = ${heltec_v4_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.19
# renovate: datasource=git-refs depName=Quency-D_chsc6x packageName=https://github.com/Quency-D/chsc6x gitBranch=master
https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
variants/esp32s3/heltec_vision_master_t190/platformio.ini
+1 -1
View File
@@ -20,5 +20,5 @@ build_flags =
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-st7789 packageName=https://github.com/meshtastic/st7789 gitBranch=main
https://github.com/meshtastic/st7789/archive/92bae2e4a307afb430c3b0bc3d661c55ee1565f0.zip
https://github.com/meshtastic/st7789/archive/5180423ae2dbf5885168a8bfb308c7fb7eff6930.zip
upload_speed = 921600
variants/esp32s3/m5stack_cardputer_adv/platformio.ini
+1 -4
View File
@@ -10,13 +10,10 @@ build_flags =
-D M5STACK_CARDPUTER_ADV
-D ARDUINO_USB_CDC_ON_BOOT=1
-I variants/esp32s3/m5stack_cardputer_adv
build_src_filter =
${esp32s3_base.build_src_filter}
+<../variants/esp32s3/m5stack_cardputer_adv>
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-st7789 packageName=https://github.com/meshtastic/st7789 gitBranch=main
https://github.com/meshtastic/st7789/archive/92bae2e4a307afb430c3b0bc3d661c55ee1565f0.zip
https://github.com/meshtastic/st7789/archive/5180423ae2dbf5885168a8bfb308c7fb7eff6930.zip
# renovate: datasource=github-tags depName=pschatzmann_arduino-audio-driver packageName=pschatzmann/arduino-audio-driver
https://github.com/pschatzmann/arduino-audio-driver/archive/v0.2.1.zip
# renovate: datasource=git-refs depName=ESP8266Audio packageName=https://github.com/meshtastic/ESP8266Audio gitBranch=meshtastic-2.0.0-dacfix
variants/esp32s3/m5stack_cardputer_adv/variant.cpp
-40
View File
@@ -1,40 +0,0 @@
#include "AudioBoard.h"
#include "configuration.h"
DriverPins PinsAudioBoardES8311;
AudioBoard board(AudioDriverES8311, PinsAudioBoardES8311);
// M5stack Cardputer ADV specific init
void lateInitVariant()
{
// AudioDriverLogger.begin(Serial, AudioDriverLogLevel::Debug);
// I2C: function, scl, sda
PinsAudioBoardES8311.addI2C(PinFunction::CODEC, Wire);
// I2S: function, mclk, bck, ws, data_out, data_in
PinsAudioBoardES8311.addI2S(PinFunction::CODEC, DAC_I2S_MCLK, DAC_I2S_BCK, DAC_I2S_WS, DAC_I2S_DOUT, DAC_I2S_DIN);
// configure codec
CodecConfig cfg;
cfg.input_device = ADC_INPUT_LINE1;
cfg.output_device = DAC_OUTPUT_ALL;
cfg.i2s.bits = BIT_LENGTH_16BITS;
cfg.i2s.rate = RATE_44K;
board.begin(cfg);
// extra ES8311 init
auto es8311_write_reg = [](uint8_t reg, uint8_t val) {
Wire.beginTransmission(0x18); // ES8311 i2c address
Wire.write(reg);
Wire.write(val);
Wire.endTransmission();
};
es8311_write_reg(0x00, 0x80); // reset, power on
es8311_write_reg(0x01, 0xB5); // MCLK = BCLK
es8311_write_reg(0x02, 0x18); // CLOCK_MANAGER/ MULT_PRE=3
es8311_write_reg(0x0D, 0x01); // analog power up
es8311_write_reg(0x12, 0x00); // DAC power up
es8311_write_reg(0x13, 0x10); // enable HP drive
es8311_write_reg(0x32, 0xBF); // DAC volume (0dB)
es8311_write_reg(0x37, 0x08); // EQ bypass
}
variants/esp32s3/picomputer-s3/variant.h
+1 -2
View File
@@ -47,10 +47,9 @@
#define TFT_OFFSET_Y 0
#define TFT_OFFSET_ROTATION 0
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5
#define SCREEN_TRANSITION_FRAMERATE 30
// Picomputer gets a white on black display
#define TFT_MESH_OVERRIDE COLOR565(255, 255, 255)
#define INPUTBROKER_MATRIX_TYPE 1
variants/esp32s3/seeed-sensecap-indicator/variant.h
+1 -1
View File
@@ -36,7 +36,7 @@
#define TFT_OFFSET_ROTATION 0
#define TFT_BL 45
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5 // fps
#define SCREEN_TRANSITION_FRAMERATE 30 // fps
#define USE_TFTDISPLAY 1
#define HAS_TOUCHSCREEN 1
variants/esp32s3/station-g2/pins_arduino.h
Regular → Executable
View File
variants/esp32s3/station-g2/platformio.ini
Regular → Executable
View File
variants/esp32s3/station-g2/variant.h
Regular → Executable
View File
variants/esp32s3/t-deck-pro-v1_1/platformio.ini
+1 -1
View File
@@ -30,7 +30,7 @@ build_flags =
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
# renovate: datasource=git-refs depName=CSE_Touch packageName=https://github.com/CIRCUITSTATE/CSE_Touch gitBranch=main
https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
# renovate: datasource=github-tags depName=CSE_CST328 packageName=CIRCUITSTATE/CSE_CST328
variants/esp32s3/t-deck-pro/platformio.ini
+1 -1
View File
@@ -34,7 +34,7 @@ build_flags =
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
# renovate: datasource=git-refs depName=CSE_Touch packageName=https://github.com/CIRCUITSTATE/CSE_Touch gitBranch=main
https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
# renovate: datasource=github-tags depName=CSE_CST328 packageName=CIRCUITSTATE/CSE_CST328
variants/esp32s3/t-deck/variant.h
+1 -1
View File
@@ -20,7 +20,7 @@
#define TFT_OFFSET_Y 0
#define TFT_OFFSET_ROTATION 0
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5
#define SCREEN_TRANSITION_FRAMERATE 30
#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
#define USE_TFTDISPLAY 1
#define HAS_PHYSICAL_KEYBOARD 1
variants/esp32s3/t-watch-s3/variant.h
+4 -1
View File
@@ -39,9 +39,10 @@
#define DAC_I2S_BCK 48
#define DAC_I2S_WS 15
#define DAC_I2S_DOUT 46
#define DAC_I2S_MCLK 0
#define DAC_I2S_MCLK -1
#define HAS_AXP2101
#define PMU_POWER_BUTTON_IS_CANCEL // maps a short click of the power button to a cancel action (turning off the screen)
// PCF8563 RTC Module
#define PCF8563_RTC 0x51
@@ -60,6 +61,8 @@
#define BUTTON_PIN 0 // only for Plus version
#define PMU_IRQ 21 // Interrupt pin for the PMU
#define USE_SX1262
#define USE_SX1268
variants/esp32s3/t5s3_epaper/nicheGraphics.h
+45 -49
View File
@@ -6,26 +6,27 @@ NicheGraphics attempts a different approach:
Per-device config takes place in this setupNicheGraphics() method
(And a small amount in platformio.ini)
This file sets up InkHUD for Heltec VM-E290.
Different NicheGraphics UIs and different hardware variants will each have their own setup procedure.
This file sets up InkHUD for the LilyGo T5-E-Paper-S3-Pro.
The board uses a 4.7" ED047TC1 parallel e-paper display (960×540, 8-bit parallel interface).
This is driven via the FastEPD library through the NicheGraphics ED047TC1 driver adapter.
*/
#pragma once
#include "configuration.h"
#include "mesh/MeshModule.h"
#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
// InkHUD-specific components
// ---------------------------
// #include "graphics/niche/InkHUD/InkHUD.h"
#include "graphics/niche/InkHUD/WindowManager.h"
#include "graphics/niche/InkHUD/InkHUD.h"
// Applets
#include "graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h"
#include "graphics/niche/InkHUD/Applets/User/DM/DMApplet.h"
#include "graphics/niche/InkHUD/Applets/User/FavoritesMap/FavoritesMapApplet.h"
#include "graphics/niche/InkHUD/Applets/User/Heard/HeardApplet.h"
#include "graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h"
#include "graphics/niche/InkHUD/Applets/User/RecentsList/RecentsListApplet.h"
@@ -33,27 +34,20 @@ Different NicheGraphics UIs and different hardware variants will each have their
// Shared NicheGraphics components
// --------------------------------
#include "graphics/niche/Drivers/Backlight/LatchingBacklight.h"
#include "graphics/niche/Drivers/EInk/DEPG0290BNS800.h"
#include "graphics/niche/Drivers/EInk/ED047TC1.h"
#include "graphics/niche/Inputs/TwoButton.h"
void setupNicheGraphics()
{
using namespace NicheGraphics;
// SPI
// -----------------------------
// Display is connected to HSPI
SPIClass *hspi = new SPIClass(HSPI);
hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS);
// E-Ink Driver
// -----------------------------
// The ED047TC1 is a parallel display — no SPI bus setup needed.
// begin() args are part of the EInk interface but are ignored for parallel displays.
// Use E-Ink driver
Drivers::EInk *driver = new Drivers::DEPG0290BNS800;
driver->begin(hspi, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY);
Drivers::EInk *driver = new Drivers::ED047TC1;
driver->begin(nullptr, 0, 0, 0);
// InkHUD
// ----------------------------
@@ -67,57 +61,59 @@ void setupNicheGraphics()
// Set how unhealthy additional FAST updates beyond this number are
inkhud->setDisplayResilience(7, 1.5);
// Prepare fonts
InkHUD::Applet::fontLarge = FREESANS_9PT_WIN1252;
InkHUD::Applet::fontSmall = FREESANS_6PT_WIN1252;
// Prepare fonts — use larger sizes to suit the 4.7" screen at ~234 DPI
InkHUD::Applet::fontLarge = FREESANS_24PT_WIN1253;
InkHUD::Applet::fontMedium = FREESANS_18PT_WIN1253;
InkHUD::Applet::fontSmall = FREESANS_12PT_WIN1253;
// Init settings, and customize defaults
// Customize default settings
inkhud->persistence->settings.userTiles.maxCount = 2; // How many tiles can the display handle?
inkhud->persistence->settings.rotation = 1; // 90 degrees clockwise
inkhud->persistence->settings.rotation = 3; // 270 degrees clockwise
inkhud->persistence->settings.userTiles.count = 1; // One tile only by default, keep things simple for new users
inkhud->persistence->settings.optionalMenuItems.nextTile = false; // Behavior handled by aux button instead
inkhud->persistence->settings.optionalFeatures.batteryIcon = true; // Device definitely has a battery
inkhud->persistence->settings.optionalFeatures.batteryIcon = true;
inkhud->persistence->settings.optionalMenuItems.backlight = false;
// Setup backlight
// Note: AUX button behavior configured further down
Drivers::LatchingBacklight *backlight = Drivers::LatchingBacklight::getInstance();
backlight->setPin(PIN_EINK_EN);
// Alignment must cancel rotation for visual-frame touch input: (rotation + alignment) % 4 == 0.
inkhud->persistence->settings.joystick.alignment = (4 - inkhud->persistence->settings.rotation) % 4;
// Pick applets
// Note: order of applets determines priority of "auto-show" feature
// Optional arguments for defaults:
// - is activated?
// - is autoshown?
// - is foreground on a specific tile (index)?
inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet, true, true); // Activated, autoshown
inkhud->addApplet("DMs", new InkHUD::DMApplet);
inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0));
inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1));
inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true); // Activated
inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet);
inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet, false, false); // Not Active, not autoshown
inkhud->addApplet("DMs", new InkHUD::DMApplet, true, true); // Activated, Autoshown
inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0), true, true); // Activated, Autoshown
inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1), false, false); // Not Active, not autoshown
inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true, false); // Activated, not autoshown
inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet, true, false); // Activated, not autoshown
inkhud->addApplet("Heard", new InkHUD::HeardApplet, true, false, 0); // Activated, not autoshown, default on tile 0
// inkhud->addApplet("Basic", new InkHUD::BasicExampleApplet);
// inkhud->addApplet("NewMsg", new InkHUD::NewMsgExampleApplet);
inkhud->addApplet("Favorites Map", new InkHUD::FavoritesMapApplet, false, false); // Not Active, not autoshown
// Enable reusable InkHUD touch status indicator for this touch-capable board.
inkhud->setTouchEnabledProvider(isTouchInputEnabled);
// Start running InkHUD
inkhud->begin();
// Arm GT911 capacitive-home callback only after InkHUD startup is complete.
t5SetHomeCapButtonEventsEnabled(true);
// Keep Wireless Paper single-button semantics regardless of persisted settings:
// short press advances, long press opens menu/selects.
inkhud->persistence->settings.joystick.enabled = false;
// Buttons
// --------------------------
Inputs::TwoButton *buttons = Inputs::TwoButton::getInstance(); // A shared NicheGraphics component
// Setup the main user button (0)
// #0: BOOT button (primary user input for InkHUD navigation on T5-S3)
#if defined(T5_S3_EPAPER_PRO_V1)
buttons->setWiring(0, PIN_BUTTON2);
#else
buttons->setWiring(0, BUTTON_PIN);
buttons->setHandlerShortPress(0, []() { InkHUD::InkHUD::getInstance()->shortpress(); });
buttons->setHandlerLongPress(0, []() { InkHUD::InkHUD::getInstance()->longpress(); });
// Setup the aux button (1)
// Bonus feature of VME290
buttons->setWiring(1, BUTTON_PIN_SECONDARY);
buttons->setHandlerShortPress(1, []() { InkHUD::InkHUD::getInstance()->nextTile(); });
#endif
buttons->setHandlerShortPress(0, [inkhud]() { inkhud->shortpress(); });
buttons->setHandlerLongPress(0, [inkhud]() { inkhud->longpress(); });
buttons->start();
}
#endif
#endif
variants/esp32s3/t5s3_epaper/platformio.ini
+1 -1
View File
@@ -5,7 +5,7 @@ board_build.partition = default_16MB.csv
board_check = true
upload_protocol = esptool
build_flags = -fno-strict-aliasing
${esp32_base.build_flags}
${esp32s3_base.build_flags}
-I variants/esp32s3/t5s3_epaper
-D T5_S3_EPAPER_PRO
-D USE_EINK
variants/esp32s3/t5s3_epaper/variant.cpp
+29 -37
View File
@@ -1,28 +1,9 @@
#include "configuration.h"
#ifdef T5_S3_EPAPER_PRO
#include "TouchDrvGT911.hpp"
#include "Wire.h"
#include "input/TouchScreenImpl1.h"
TouchDrvGT911 touch;
bool readTouch(int16_t *x, int16_t *y)
{
if (!digitalRead(GT911_PIN_INT)) {
int16_t raw_x;
int16_t raw_y;
if (touch.getPoint(&raw_x, &raw_y)) {
// rotate 90° for landscape
*x = raw_y;
*y = EPD_WIDTH - 1 - raw_x;
LOG_DEBUG("touched(%d/%d)", *x, *y);
return true;
}
}
return false;
}
// Pin-level early init only. All touch, backlight, and InkHUD code lives in
// src/platform/extra_variants/t5s3_epaper/variant.cpp where PlatformIO's
// library dependency finder can resolve headers like TouchDrvGT911.hpp.
#include "variant.h"
#include "Arduino.h"
#include "pins_arduino.h"
void earlyInitVariant()
{
@@ -31,17 +12,28 @@ void earlyInitVariant()
pinMode(SDCARD_CS, OUTPUT);
digitalWrite(SDCARD_CS, HIGH);
pinMode(BOARD_BL_EN, OUTPUT);
}
// Backlight ON at boot (active-HIGH). Full backlight state management
// lives in src/platform/extra_variants/t5s3_epaper/variant.cpp.
digitalWrite(BOARD_BL_EN, HIGH);
// T5-S3-ePaper Pro specific (late-) init
void lateInitVariant(void)
{
touch.setPins(GT911_PIN_RST, GT911_PIN_INT);
if (touch.begin(Wire, GT911_SLAVE_ADDRESS_L, GT911_PIN_SDA, GT911_PIN_SCL)) {
touchScreenImpl1 = new TouchScreenImpl1(EPD_WIDTH, EPD_HEIGHT, readTouch);
touchScreenImpl1->init();
} else {
LOG_ERROR("Failed to find touch controller!");
}
// Program GT911 touch controller to I2C address 0x14 (GT911_SLAVE_ADDRESS_H) before
// the I2C bus scan runs. GPIO3 (INT) defaults LOW on ESP32-S3 cold boot, which would
// leave the GT911 at 0x5D (GT911_SLAVE_ADDRESS_L) — the same address as the SFA30
// air quality sensor — causing a false-positive SFA30 detection during the I2C scan.
//
// GT911 datasheet §4.3 "Address Selection":
// Pull INT HIGH before releasing RST → device latches address 0x14 (SLAVE_ADDRESS_H)
// Pull INT LOW before releasing RST → device latches address 0x5D (SLAVE_ADDRESS_L)
// Minimum RST assert time: 100 µs; minimum startup time after RST deassert: 5 ms.
//
// lateInitVariant() calls touch.begin() which repeats this sequence internally while
// also performing full I2C initialisation; the double-reset is harmless.
pinMode(GT911_PIN_RST, OUTPUT);
digitalWrite(GT911_PIN_RST, LOW);
pinMode(GT911_PIN_INT, OUTPUT);
digitalWrite(GT911_PIN_INT, HIGH); // HIGH → latch address 0x14
delay(1); // > 100 µs
digitalWrite(GT911_PIN_RST, HIGH);
delay(10); // > 5 ms startup
pinMode(GT911_PIN_INT, INPUT); // release INT for interrupt use
}
#endif
variants/esp32s3/t5s3_epaper/variant.h
+34 -3
View File
@@ -16,6 +16,11 @@
#define I2C_SCL SCL
#define HAS_TOUCHSCREEN 1
#define TOUCH_POLL_INTERVAL_IDLE 25
#define TOUCH_POLL_INTERVAL_ACTIVE 15
#define TOUCH_POLL_INTERVAL_RELEASE 20
#define TOUCH_POLL_INTERVAL_ACTIVE_FAST 8
#define TOUCH_POLL_INTERVAL_RELEASE_FAST 8
#define GT911_PIN_SDA SDA
#define GT911_PIN_SCL SCL
#if defined(T5_S3_EPAPER_PRO_V1)
@@ -25,10 +30,34 @@
#define GT911_PIN_INT 3
#define GT911_PIN_RST 9
#endif
// Do not use touch as a light-sleep wake source on T5-S3.
// Wake should come from physical buttons/radio/timer only.
#define SCREEN_TOUCH_INT GT911_PIN_INT
#define PCF85063_RTC 0x51
// Touch control helpers for this variant
bool isTouchInputEnabled();
void setTouchInputEnabled(bool enabled, bool showIndicator);
void toggleTouchInputEnabled();
// Backlight control helpers for this variant (non-latching behavior)
void t5BacklightSetUserEnabled(bool enabled);
bool t5BacklightIsUserEnabled();
void t5BacklightToggleUser();
void t5BacklightSetForcedByTimeout(bool forced);
void t5BacklightSetForcedBySleep(bool forced);
void t5BacklightHandleUserInput();
// Touch timeout/wake helpers for this variant
void t5TouchSetForcedByTimeout(bool forced);
bool t5TouchIsForcedByTimeout();
void t5TouchHandleUserInput();
// Gate GT911 capacitive-home callback delivery until InkHUD startup is complete.
void t5SetHomeCapButtonEventsEnabled(bool enabled);
#define PCF8563_RTC 0x51
#define HAS_RTC 1
#define PCF85063_INT 2
#define PCF8563_INT 2
#define USE_POWERSAVE
#define SLEEP_TIME 120
@@ -45,8 +74,10 @@
#define ALT_BUTTON_PIN PIN_BUTTON2
#else
#define BUTTON_PIN 0
#define BOARD_PCA9535_ADDR 0x20
#define BOARD_PCA9535_INT 38
#define BOARD_PCA9535_BUTTON_MASK 0x04
#endif
// SD card
#define HAS_SDCARD
#define SDCARD_CS SPI_CS
variants/esp32s3/tbeam-s3-core/variant.h
+4 -6
View File
@@ -9,8 +9,6 @@
#define BUTTON_PIN 0 // The middle button GPIO on the T-Beam S3
// #define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
#define LED_STATE_ON 0 // State when LED is lit
// TTGO uses a common pinout for their SX1262 vs RF95 modules - both can be enabled and we will probe at runtime for RF95 and if
// not found then probe for SX1262
#define USE_SX1262
@@ -48,9 +46,9 @@
#define LR11X0_DIO_AS_RF_SWITCH
#endif
// Leave undefined to disable our PMU IRQ handler. DO NOT ENABLE THIS because the pmuirq can cause sperious interrupts
// and waking from light sleep
// #define PMU_IRQ 40
// Voiding warrenties, we're gonna try the IRQ
#define PMU_IRQ 40
#define PMU_POWER_BUTTON_IS_CANCEL // maps a short click of the power button to a cancel action (turning off the screen)
#define HAS_AXP2101
// PCF8563 RTC Module
@@ -76,4 +74,4 @@
// has 32768 Hz crystal
#define HAS_32768HZ 1
#define USE_SH1106
#define USE_SH1106
variants/esp32s3/tlora-pager/variant.h
+1 -1
View File
@@ -18,7 +18,7 @@
#define TFT_OFFSET_Y 0
#define TFT_OFFSET_ROTATION 3
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5
#define SCREEN_TRANSITION_FRAMERATE 30
#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
#define USE_TFTDISPLAY 1
#define HAS_PHYSICAL_KEYBOARD 1
variants/esp32s3/tracksenger/internal/variant.h
+1 -2
View File
@@ -73,7 +73,6 @@
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// Picomputer gets a white on black display
#define TFT_MESH_OVERRIDE COLOR565(255, 255, 255)
// keyboard changes
@@ -89,4 +88,4 @@
{ \
26, 37, 17, 16, 15, 7 \
}
// #end keyboard
// #end keyboard
variants/esp32s3/tracksenger/lcd/variant.h
+1 -2
View File
@@ -97,7 +97,6 @@
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// Picomputer gets a white on black display
#define TFT_MESH_OVERRIDE COLOR565(255, 255, 255)
// keyboard changes
@@ -113,4 +112,4 @@
{ \
26, 37, 17, 16, 15, 7 \
}
// #end keyboard
// #end keyboard
variants/esp32s3/tracksenger/oled/variant.h
+1 -2
View File
@@ -74,7 +74,6 @@
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// Picomputer gets a white on black display
#define TFT_MESH_OVERRIDE COLOR565(255, 255, 255)
// keyboard changes
@@ -90,4 +89,4 @@
{ \
26, 37, 17, 16, 15, 7 \
}
// #end keyboard
// #end keyboard
variants/esp32s3/unphone/variant.h
+2 -2
View File
@@ -35,7 +35,7 @@
#define TFT_OFFSET_ROTATION 6 // unPhone's screen wired unusually, 0 typical
#define TFT_INVERT false
#define SCREEN_ROTATE true
#define SCREEN_TRANSITION_FRAMERATE 5
#define SCREEN_TRANSITION_FRAMERATE 30
#define USE_TFTDISPLAY 1
#define HAS_TOUCHSCREEN 1
@@ -74,4 +74,4 @@
// #define BATTERY_PIN 13 // battery V measurement pin; vbat divider is here
// #define ADC_CHANNEL ADC2_GPIO13_CHANNEL
// #define BAT_MEASURE_ADC_UNIT 2
// #define BAT_MEASURE_ADC_UNIT 2
variants/native/portduino.ini
+1 -1
View File
@@ -2,7 +2,7 @@
[portduino_base]
platform =
# renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
https://github.com/meshtastic/platform-native/archive/71ed55bb95feb3c43ebde1ec1e2e17643a424c04.zip
https://github.com/meshtastic/platform-native/archive/135b91e953db0b5f44d278f8ebd5b8d985fc03d8.zip
framework = arduino
build_src_filter =
variants/nrf52840/Dongle_nRF52840-pca10059-v1/platformio.ini
+1 -1
View File
@@ -12,5 +12,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/Dongle_
lib_deps =
${nrf52840_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
debug_tool = jlink
variants/nrf52840/ELECROW-ThinkNode-M4/variant.h
-1
View File
@@ -85,7 +85,6 @@ static const uint8_t A0 = PIN_A0;
// charger status
#define EXT_CHRG_DETECT (32 + 6)
#define EXT_CHRG_DETECT_VALUE HIGH
// SPI
#define SPI_INTERFACES_COUNT 1
variants/nrf52840/ELECROW-ThinkNode-M6/variant.cpp
+8 -3
View File
@@ -20,6 +20,7 @@
#include "variant.h"
#include "nrf.h"
#include "power.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
@@ -65,7 +66,11 @@ void variant_shutdown()
nrf_gpio_pin_sense_t sense1 = NRF_GPIO_PIN_SENSE_LOW;
nrf_gpio_cfg_sense_set(PIN_BUTTON1, sense1);
nrf_gpio_cfg_input(EXT_CHRG_DETECT, NRF_GPIO_PIN_PULLUP); // Configure the pin to be woken up as an input
nrf_gpio_pin_sense_t sense2 = NRF_GPIO_PIN_SENSE_LOW;
nrf_gpio_cfg_sense_set(EXT_CHRG_DETECT, sense2);
// If we are sleeping because of low battery, wake up when the solar charger detects power.
// But if the user intentionally put us to sleep with the button, don't wake up just because the lights are on
if (power->isLowBattery()) {
nrf_gpio_cfg_input(EXT_CHRG_DETECT, NRF_GPIO_PIN_PULLUP); // Configure the pin to be woken up as an input
nrf_gpio_pin_sense_t sense2 = NRF_GPIO_PIN_SENSE_LOW;
nrf_gpio_cfg_sense_set(EXT_CHRG_DETECT, sense2);
}
}
variants/nrf52840/ELECROW-ThinkNode-M6/variant.h
+1 -1
View File
@@ -138,7 +138,7 @@ static const uint8_t A0 = PIN_A0;
#define HAS_SOLAR
#define OCV_ARRAY 4080, 3990, 3935, 3880, 3825, 3770, 3715, 3660, 3605, 3550, 3450
#define OCV_ARRAY 4080, 3990, 3935, 3880, 3825, 3770, 3715, 3660, 3605, 3550, 3490
#ifdef __cplusplus
}
variants/nrf52840/ME25LS01-4Y10TD_e-ink/platformio.ini
+1 -1
View File
@@ -16,7 +16,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ME25LS0
lib_deps =
${nrf52840_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
upload_protocol = nrfutil
;upload_port = /dev/ttyACM1
variants/nrf52840/MakePython_nRF52840_eink/platformio.ini
+1 -1
View File
@@ -15,6 +15,6 @@ lib_deps =
# renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
debug_tool = jlink
;upload_port = /dev/ttyACM4
variants/nrf52840/TWC_mesh_v4/platformio.ini
+1 -1
View File
@@ -9,5 +9,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/TWC_mes
lib_deps =
${nrf52840_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
debug_tool = jlink
variants/nrf52840/heltec_mesh_node_t114/platformio.ini
+1 -1
View File
@@ -23,4 +23,4 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/heltec_
lib_deps =
${nrf52840_base.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-st7789 packageName=https://github.com/meshtastic/st7789 gitBranch=main
https://github.com/meshtastic/st7789/archive/92bae2e4a307afb430c3b0bc3d661c55ee1565f0.zip
https://github.com/meshtastic/st7789/archive/5180423ae2dbf5885168a8bfb308c7fb7eff6930.zip
variants/nrf52840/heltec_mesh_node_t114/variant.h
-3
View File
@@ -57,9 +57,6 @@ extern "C" {
#define TFT_OFFSET_X 0
#define TFT_OFFSET_Y 0
// T114 gets a muted yellow on black display
#define TFT_MESH_OVERRIDE COLOR565(255, 255, 128)
// #define TFT_OFFSET_ROTATION 0
// #define SCREEN_ROTATE
// #define SCREEN_TRANSITION_FRAMERATE 5
variants/nrf52840/heltec_mesh_solar/platformio.ini
+1 -1
View File
@@ -132,4 +132,4 @@ build_flags = ${heltec_mesh_solar_base.build_flags}
lib_deps =
${heltec_mesh_solar_base.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-st7789 packageName=https://github.com/meshtastic/st7789 gitBranch=main
https://github.com/meshtastic/st7789/archive/92bae2e4a307afb430c3b0bc3d661c55ee1565f0.zip
https://github.com/meshtastic/st7789/archive/5180423ae2dbf5885168a8bfb308c7fb7eff6930.zip
variants/nrf52840/nrf52.ini
+1 -1
View File
@@ -7,7 +7,7 @@ extends = arduino_base
platform_packages =
; our custom Git version with C++17 support in platform.txt
# TODO renovate
platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#cpp17-platform
platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#master
; Don't renovate toolchain-gccarmnoneeabi
platformio/toolchain-gccarmnoneeabi@~1.90301.0
variants/nrf52840/rak4631_epaper/platformio.ini
+1 -1
View File
@@ -16,7 +16,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
lib_deps =
${nrf52840_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
# renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
melopero/Melopero RV3028@1.2.0
# renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library
variants/nrf52840/rak4631_epaper_onrxtx/platformio.ini
+1 -1
View File
@@ -18,7 +18,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
lib_deps =
${nrf52840_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
# renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
melopero/Melopero RV3028@1.2.0
# renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library