From a632d0133f876f18361d6ffd3e578bd8aaf84551 Mon Sep 17 00:00:00 2001 From: Robert Sasak Date: Sun, 22 Mar 2026 14:42:13 +0100 Subject: [PATCH 1/4] Add LED_BUILTIN for variant tlora_v1 (#9973) --- variants/esp32/tlora_v1/platformio.ini | 1 + 1 file changed, 1 insertion(+) diff --git a/variants/esp32/tlora_v1/platformio.ini b/variants/esp32/tlora_v1/platformio.ini index c45cc2ce9..5f72d634e 100644 --- a/variants/esp32/tlora_v1/platformio.ini +++ b/variants/esp32/tlora_v1/platformio.ini @@ -13,4 +13,5 @@ build_flags = ${esp32_base.build_flags} -D TLORA_V1 -I variants/esp32/tlora_v1 + -ULED_BUILTIN upload_speed = 115200 From 8384659608fbd4ae414ac692610c2d72884cb2d9 Mon Sep 17 00:00:00 2001 From: Elwimen <8713394+Elwimen@users.noreply.github.com> Date: Sun, 22 Mar 2026 15:39:41 +0100 Subject: [PATCH 2/4] fix: apply all LoRa config changes live without rebooting (#9962) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * fix: apply all LoRa config changes live without rebooting All LoRa radio settings (SF, BW, CR, frequency, power, preset, sx126x_rx_boosted_gain) now apply immediately via reconfigure() without requiring a node reboot. - AdminModule: requiresReboot = false for all LoRa config changes; LoRa changes were already handled by the configChanged observer calling reconfigure() but the reboot flag was set unnecessarily - AdminModule: validate LORA_24 region against radio hardware at config time; reject with BAD_REQUEST if hardware lacks 2.4 GHz capability (wideLora() returns false or no radio instance) - SX126xInterface/LR11x0Interface: apply sx126x_rx_boosted_gain in reconfigure(); register 0x08AC is writable in STDBY mode (SX1261/2 datasheet §9.6); retention registers written so setting survives warm-sleep cycles; log warning on setter failure - DebugRenderer: show BW/SF/CR on debug screen when custom modem is active instead of the preset name - DisplayFormatters: clarify comment on getModemPresetDisplayName * fix: remove redundant reboot after LoRa config changes in on-device menus Region, frequency slot, and radio preset pickers in MenuHandler all called reloadConfig() then immediately set rebootAtMsec. reloadConfig() already fires the configChanged observer which calls reconfigure(), so the forced reboot was unnecessary — same rationale as the parent commit. * fix: guard LORA_24 region selection against hardware capability in on-device menu Without a reboot, reconfigure() now applies region changes directly. Previously getRadio() caught the LORA_24-on-sub-GHz mismatch post-reboot and reverted to UNSET — that safety net is gone. Add an explicit wideLora() check in LoraRegionPicker so sub-GHz-only hardware silently ignores LORA_24 selection instead of attempting a live reconfigure with an invalid frequency. --------- Co-authored-by: elwimen Co-authored-by: Ben Meadors --- src/DisplayFormatters.cpp | 3 +- src/graphics/draw/DebugRenderer.cpp | 13 +++++++-- src/graphics/draw/MenuHandler.cpp | 12 ++++++-- src/mesh/LR11x0Interface.cpp | 5 ++++ src/mesh/SX126xInterface.cpp | 5 ++++ src/modules/AdminModule.cpp | 44 ++++++++++++++++++++--------- 6 files changed, 63 insertions(+), 19 deletions(-) diff --git a/src/DisplayFormatters.cpp b/src/DisplayFormatters.cpp index d88f9fc9f..fdcf840dc 100644 --- a/src/DisplayFormatters.cpp +++ b/src/DisplayFormatters.cpp @@ -4,7 +4,8 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC bool usePreset) { - // If use_preset is false, always return "Custom" + // If use_preset is false, always return "Custom" — callers such as RadioInterface and Channels + // rely on this being a stable literal for channel-name hashing and default-channel detection. if (!usePreset) { return "Custom"; } diff --git a/src/graphics/draw/DebugRenderer.cpp b/src/graphics/draw/DebugRenderer.cpp index 2069c71ec..27a50d3f9 100644 --- a/src/graphics/draw/DebugRenderer.cpp +++ b/src/graphics/draw/DebugRenderer.cpp @@ -408,7 +408,16 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, display->drawString(nameX, getTextPositions(display)[line++], device_role); // === Third Row: Radio Preset === - auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset); + // For custom modem settings show the actual parameters; for presets use the preset name. + char modeStr[16]; + if (!config.lora.use_preset) { + snprintf(modeStr, sizeof(modeStr), "BW%u-SF%u-CR%u", static_cast(config.lora.bandwidth), + static_cast(config.lora.spread_factor), static_cast(config.lora.coding_rate)); + } else { + strncpy(modeStr, DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, true), + sizeof(modeStr) - 1); + modeStr[sizeof(modeStr) - 1] = '\0'; + } char regionradiopreset[25]; const char *region = myRegion ? myRegion->name : NULL; @@ -416,7 +425,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, if (currentResolution == ScreenResolution::UltraLow) { snprintf(regionradiopreset, sizeof(regionradiopreset), "%s", region); } else { - snprintf(regionradiopreset, sizeof(regionradiopreset), "%s/%s", region, mode); + snprintf(regionradiopreset, sizeof(regionradiopreset), "%s/%s", region, modeStr); } } textWidth = display->getStringWidth(regionradiopreset); diff --git a/src/graphics/draw/MenuHandler.cpp b/src/graphics/draw/MenuHandler.cpp index 28836b536..daefff8ee 100644 --- a/src/graphics/draw/MenuHandler.cpp +++ b/src/graphics/draw/MenuHandler.cpp @@ -18,6 +18,7 @@ #include "main.h" #include "mesh/Default.h" #include "mesh/MeshTypes.h" +#include "mesh/RadioLibInterface.h" #include "modules/AdminModule.h" #include "modules/CannedMessageModule.h" #include "modules/ExternalNotificationModule.h" @@ -160,6 +161,14 @@ void menuHandler::LoraRegionPicker(uint32_t duration) return; } + // Guard: without a reboot, reconfigure() applies the region directly. + // Reject LORA_24 on sub-GHz-only hardware — getRadio() used to catch this post-reboot. + if (selectedRegion == meshtastic_Config_LoRaConfig_RegionCode_LORA_24 && + !(RadioLibInterface::instance && RadioLibInterface::instance->wideLora())) { + LOG_WARN("Radio hardware does not support 2.4 GHz; ignoring LORA_24 selection"); + return; + } + config.lora.region = selectedRegion; auto changes = SEGMENT_CONFIG; @@ -181,7 +190,6 @@ void menuHandler::LoraRegionPicker(uint32_t duration) } service->reloadConfig(changes); - rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000); }); bannerOptions.durationMs = duration; @@ -300,7 +308,6 @@ void menuHandler::FrequencySlotPicker() config.lora.channel_num = selected; service->reloadConfig(SEGMENT_CONFIG); - rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000); }; screen->showOverlayBanner(bannerOptions); @@ -339,7 +346,6 @@ void menuHandler::radioPresetPicker() config.lora.channel_num = 0; // Reset to default channel for the preset config.lora.override_frequency = 0; // Clear any custom frequency service->reloadConfig(SEGMENT_CONFIG); - rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000); }); screen->showOverlayBanner(bannerOptions); diff --git a/src/mesh/LR11x0Interface.cpp b/src/mesh/LR11x0Interface.cpp index 4fec06da4..9f808da26 100644 --- a/src/mesh/LR11x0Interface.cpp +++ b/src/mesh/LR11x0Interface.cpp @@ -192,6 +192,11 @@ template bool LR11x0Interface::reconfigure() err = lora.setOutputPower(power); assert(err == RADIOLIB_ERR_NONE); + // Apply RX gain mode — valid in STDBY, matches resetAGC() pattern + err = lora.setRxBoostedGainMode(config.lora.sx126x_rx_boosted_gain); + if (err != RADIOLIB_ERR_NONE) + LOG_WARN("LR11x0 setRxBoostedGainMode %s%d", radioLibErr, err); + startReceive(); // restart receiving return RADIOLIB_ERR_NONE; diff --git a/src/mesh/SX126xInterface.cpp b/src/mesh/SX126xInterface.cpp index 2e9a3250d..a4e82011e 100644 --- a/src/mesh/SX126xInterface.cpp +++ b/src/mesh/SX126xInterface.cpp @@ -253,6 +253,11 @@ template bool SX126xInterface::reconfigure() LOG_ERROR("SX126X setOutputPower %s%d", radioLibErr, err); assert(err == RADIOLIB_ERR_NONE); + // Apply RX gain mode — valid in STDBY (datasheet §9.6), matches resetAGC() pattern + err = lora.setRxBoostedGainMode(config.lora.sx126x_rx_boosted_gain); + if (err != RADIOLIB_ERR_NONE) + LOG_WARN("SX126X setRxBoostedGainMode %s%d", radioLibErr, err); + startReceive(); // restart receiving return RADIOLIB_ERR_NONE; diff --git a/src/modules/AdminModule.cpp b/src/modules/AdminModule.cpp index 340a75080..e3a501097 100644 --- a/src/modules/AdminModule.cpp +++ b/src/modules/AdminModule.cpp @@ -26,6 +26,7 @@ #include "MeshRadio.h" #include "RadioInterface.h" #include "TypeConversions.h" +#include "mesh/RadioLibInterface.h" #if !MESHTASTIC_EXCLUDE_MQTT #include "mqtt/MQTT.h" @@ -198,10 +199,35 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta handleSetOwner(r->set_owner); break; - case meshtastic_AdminMessage_set_config_tag: + case meshtastic_AdminMessage_set_config_tag: { LOG_DEBUG("Client set config"); - handleSetConfig(r->set_config, fromOthers); + + // Non-LoRa configs need no further validation. + if (r->set_config.which_payload_variant != meshtastic_Config_lora_tag) { + LOG_DEBUG("Non-LoRa config, applying directly"); + handleSetConfig(r->set_config, fromOthers); + break; + } + + // Only LORA_24 requires hardware capability validation. + if (r->set_config.payload_variant.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24) { + LOG_DEBUG("LoRa config, region is not LORA_24, applying directly"); + handleSetConfig(r->set_config, fromOthers); + break; + } + + // Hardware supports 2.4 GHz — apply the config. + // Fail closed: null instance is treated as incapable. + if (RadioLibInterface::instance && RadioLibInterface::instance->wideLora()) { + LOG_DEBUG("LORA_24 requested, radio hardware supports 2.4 GHz, applying"); + handleSetConfig(r->set_config, fromOthers); + break; + } + + LOG_WARN("Radio hardware does not support 2.4 GHz; rejecting LORA_24 region"); + myReply = allocErrorResponse(meshtastic_Routing_Error_BAD_REQUEST, &mp); break; + } case meshtastic_AdminMessage_set_module_config_tag: LOG_DEBUG("Client set module config"); @@ -816,17 +842,9 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c, bool fromOthers) // use_preset and bandwidth are coerced into valid values by the check. } - // If no lora radio parameters change, don't need to reboot - if (oldLoraConfig.use_preset == validatedLora.use_preset && oldLoraConfig.region == validatedLora.region && - oldLoraConfig.modem_preset == validatedLora.modem_preset && oldLoraConfig.bandwidth == validatedLora.bandwidth && - oldLoraConfig.spread_factor == validatedLora.spread_factor && - oldLoraConfig.coding_rate == validatedLora.coding_rate && oldLoraConfig.tx_power == validatedLora.tx_power && - oldLoraConfig.frequency_offset == validatedLora.frequency_offset && - oldLoraConfig.override_frequency == validatedLora.override_frequency && - oldLoraConfig.channel_num == validatedLora.channel_num && - oldLoraConfig.sx126x_rx_boosted_gain == validatedLora.sx126x_rx_boosted_gain) { - requiresReboot = false; - } + // All LoRa radio changes apply live via configChanged observer → reconfigure(). + // reconfigure() puts the radio in standby, reprograms all modem parameters, and restarts receive. + requiresReboot = false; #if defined(ARCH_PORTDUINO) // If running on portduino and using SimRadio, do not require reboot From d293d654a0200fef8bbb11e7bcd716e4b5699c89 Mon Sep 17 00:00:00 2001 From: Quency-D <55523105+Quency-D@users.noreply.github.com> Date: Sun, 22 Mar 2026 22:54:46 +0800 Subject: [PATCH 3/4] add heltec_mesh_node_t096 board. (#9960) * add heltec_mesh_node_t096 board. * Fixed the GPS reset pin comments. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Added compiles if NUM_PA_POINTS is not defined. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Correct the pin description. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Specify the version of the dependency library TFT_eSPI. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Adding fields missing from the .ini file. * Modify the screen SPI frequency to 40 MHz. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors --- boards/heltec_mesh_node_t096.json | 54 +++++ src/configuration.h | 11 + src/graphics/TFTDisplay.cpp | 18 +- src/mesh/LoRaFEMInterface.cpp | 4 +- .../heltec_mesh_node_t096/platformio.ini | 34 +++ .../heltec_mesh_node_t096/variant.cpp | 76 +++++++ .../nrf52840/heltec_mesh_node_t096/variant.h | 202 ++++++++++++++++++ 7 files changed, 389 insertions(+), 10 deletions(-) create mode 100644 boards/heltec_mesh_node_t096.json create mode 100644 variants/nrf52840/heltec_mesh_node_t096/platformio.ini create mode 100644 variants/nrf52840/heltec_mesh_node_t096/variant.cpp create mode 100644 variants/nrf52840/heltec_mesh_node_t096/variant.h diff --git a/boards/heltec_mesh_node_t096.json b/boards/heltec_mesh_node_t096.json new file mode 100644 index 000000000..1e417c5b4 --- /dev/null +++ b/boards/heltec_mesh_node_t096.json @@ -0,0 +1,54 @@ +{ + "build": { + "arduino": { + "ldscript": "nrf52840_s140_v6.ld" + }, + "core": "nRF5", + "cpu": "cortex-m4", + "extra_flags": "-DNRF52840_XXAA", + "f_cpu": "64000000L", + "hwids": [ + ["0x239A", "0x4405"], + ["0x239A", "0x0029"], + ["0x239A", "0x002A"], + ["0x2886", "0x1667"] + ], + "usb_product": "HT-n5262G", + "mcu": "nrf52840", + "variant": "heltec_mesh_node_t096", + "variants_dir": "variants", + "bsp": { + "name": "adafruit" + }, + "softdevice": { + "sd_flags": "-DS140", + "sd_name": "s140", + "sd_version": "6.1.1", + "sd_fwid": "0x00B6" + }, + "bootloader": { + "settings_addr": "0xFF000" + } + }, + "connectivity": ["bluetooth"], + "debug": { + "jlink_device": "nRF52840_xxAA", + "onboard_tools": ["jlink"], + "svd_path": "nrf52840.svd", + "openocd_target": "nrf52840-mdk-rs" + }, + "frameworks": ["arduino"], + "name": "Heltec nrf (Adafruit BSP)", + "upload": { + "maximum_ram_size": 248832, + "maximum_size": 815104, + "speed": 115200, + "protocol": "nrfutil", + "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"], + "use_1200bps_touch": true, + "require_upload_port": true, + "wait_for_upload_port": true + }, + "url": "https://heltec.org/", + "vendor": "Heltec" +} diff --git a/src/configuration.h b/src/configuration.h index 8936b9d98..11be86007 100644 --- a/src/configuration.h +++ b/src/configuration.h @@ -156,8 +156,19 @@ along with this program. If not, see . #ifdef USE_KCT8103L_PA // Power Amps are often non-linear, so we can use an array of values for the power curve +#if defined(HELTEC_WIRELESS_TRACKER_V2) #define NUM_PA_POINTS 22 #define TX_GAIN_LORA 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 13, 13, 13, 12, 12, 11, 10, 9, 8, 7 +#elif defined(HELTEC_MESH_NODE_T096) +#define NUM_PA_POINTS 22 +#define TX_GAIN_LORA 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 13, 13, 13, 12, 11, 10, 9, 8, 7 +#else +// If a board enables USE_KCT8103L_PA but does not match a known variant and has +// not already provided a PA curve, fail at compile time to avoid unsafe defaults. +#if !defined(NUM_PA_POINTS) || !defined(TX_GAIN_LORA) +#error "USE_KCT8103L_PA is defined, but no PA gain curve (NUM_PA_POINTS / TX_GAIN_LORA) is configured for this board." +#endif +#endif #endif #ifdef RAK13302 diff --git a/src/graphics/TFTDisplay.cpp b/src/graphics/TFTDisplay.cpp index 1c2eb72d4..005ead292 100644 --- a/src/graphics/TFTDisplay.cpp +++ b/src/graphics/TFTDisplay.cpp @@ -1348,7 +1348,7 @@ void TFTDisplay::sendCommand(uint8_t com) digitalWrite(portduino_config.displayBacklight.pin, TFT_BACKLIGHT_ON); #elif defined(HACKADAY_COMMUNICATOR) tft->displayOn(); -#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE) +#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE) && !defined(HELTEC_MESH_NODE_T096) tft->wakeup(); tft->powerSaveOff(); #endif @@ -1359,7 +1359,7 @@ void TFTDisplay::sendCommand(uint8_t com) #ifdef UNPHONE unphone.backlight(true); // using unPhone library #endif -#ifdef RAK14014 +#if defined(RAK14014) || defined(HELTEC_MESH_NODE_T096) #elif !defined(M5STACK) && !defined(ST7789_CS) && \ !defined(HACKADAY_COMMUNICATOR) // T-Deck gets brightness set in Screen.cpp in the handleSetOn function tft->setBrightness(172); @@ -1375,7 +1375,7 @@ void TFTDisplay::sendCommand(uint8_t com) digitalWrite(portduino_config.displayBacklight.pin, !TFT_BACKLIGHT_ON); #elif defined(HACKADAY_COMMUNICATOR) tft->displayOff(); -#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE) +#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE) && !defined(HELTEC_MESH_NODE_T096) tft->sleep(); tft->powerSaveOn(); #endif @@ -1386,7 +1386,7 @@ void TFTDisplay::sendCommand(uint8_t com) #ifdef UNPHONE unphone.backlight(false); // using unPhone library #endif -#ifdef RAK14014 +#if defined(RAK14014) || defined(HELTEC_MESH_NODE_T096) #elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR) tft->setBrightness(0); #endif @@ -1401,7 +1401,7 @@ void TFTDisplay::sendCommand(uint8_t com) void TFTDisplay::setDisplayBrightness(uint8_t _brightness) { -#ifdef RAK14014 +#if defined(RAK14014) || defined(HELTEC_MESH_NODE_T096) // todo #elif !defined(HACKADAY_COMMUNICATOR) tft->setBrightness(_brightness); @@ -1421,7 +1421,7 @@ bool TFTDisplay::hasTouch(void) { #ifdef RAK14014 return true; -#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR) +#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR) && !defined(HELTEC_MESH_NODE_T096) return tft->touch() != nullptr; #else return false; @@ -1440,7 +1440,7 @@ bool TFTDisplay::getTouch(int16_t *x, int16_t *y) } else { return false; } -#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR) +#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR) && !defined(HELTEC_MESH_NODE_T096) return tft->getTouch(x, y); #else return false; @@ -1457,7 +1457,7 @@ bool TFTDisplay::connect() { concurrency::LockGuard g(spiLock); LOG_INFO("Do TFT init"); -#ifdef RAK14014 +#if defined(RAK14014) || defined(HELTEC_MESH_NODE_T096) tft = new TFT_eSPI; #elif defined(HACKADAY_COMMUNICATOR) bus = new Arduino_ESP32SPI(TFT_DC, TFT_CS, 38 /* SCK */, 21 /* MOSI */, GFX_NOT_DEFINED /* MISO */, HSPI /* spi_num */); @@ -1494,7 +1494,7 @@ bool TFTDisplay::connect() ft6336u.begin(); pinMode(SCREEN_TOUCH_INT, INPUT_PULLUP); attachInterrupt(digitalPinToInterrupt(SCREEN_TOUCH_INT), rak14014_tpIntHandle, FALLING); -#elif defined(T_DECK) || defined(PICOMPUTER_S3) || defined(CHATTER_2) +#elif defined(T_DECK) || defined(PICOMPUTER_S3) || defined(CHATTER_2) || defined(HELTEC_MESH_NODE_T096) tft->setRotation(1); // T-Deck has the TFT in landscape #elif defined(T_WATCH_S3) tft->setRotation(2); // T-Watch S3 left-handed orientation diff --git a/src/mesh/LoRaFEMInterface.cpp b/src/mesh/LoRaFEMInterface.cpp index b05bb65ed..b44c7539b 100644 --- a/src/mesh/LoRaFEMInterface.cpp +++ b/src/mesh/LoRaFEMInterface.cpp @@ -173,14 +173,16 @@ void LoRaFEMInterface::setRxModeEnableWhenMCUSleep(void) #endif #elif defined(USE_KCT8103L_PA) digitalWrite(LORA_KCT8103L_PA_CSD, HIGH); - rtc_gpio_hold_en((gpio_num_t)LORA_KCT8103L_PA_CSD); if (lna_enabled) { digitalWrite(LORA_KCT8103L_PA_CTX, LOW); } else { digitalWrite(LORA_KCT8103L_PA_CTX, HIGH); } +#if defined(ARCH_ESP32) + rtc_gpio_hold_en((gpio_num_t)LORA_KCT8103L_PA_CSD); rtc_gpio_hold_en((gpio_num_t)LORA_KCT8103L_PA_CTX); #endif +#endif } void LoRaFEMInterface::setLNAEnable(bool enabled) diff --git a/variants/nrf52840/heltec_mesh_node_t096/platformio.ini b/variants/nrf52840/heltec_mesh_node_t096/platformio.ini new file mode 100644 index 000000000..e1bdd529d --- /dev/null +++ b/variants/nrf52840/heltec_mesh_node_t096/platformio.ini @@ -0,0 +1,34 @@ +; First prototype nrf52840/sx1262 device +[env:heltec-mesh-node-t096] +custom_meshtastic_hw_model = 127 +custom_meshtastic_hw_model_slug = HELTEC_MESH_NODE_T096 +custom_meshtastic_architecture = nrf52840 +custom_meshtastic_actively_supported = true +custom_meshtastic_support_level = 1 +custom_meshtastic_display_name = Heltec Mesh Node 096 +custom_meshtastic_images = heltec-mesh-node-t096.svg, heltec-mesh-node-t096-case.svg +custom_meshtastic_tags = Heltec + +extends = nrf52840_base +board = heltec_mesh_node_t096 +board_level = pr +debug_tool = jlink + +build_flags = ${nrf52840_base.build_flags} + -Ivariants/nrf52840/heltec_mesh_node_t096 + -D HAS_LORA_FEM=1 + -D HELTEC_MESH_NODE_T096 + -D USE_TFTDISPLAY=1 + -D USER_SETUP_LOADED + -D ST7735_DRIVER + -D ST7735_REDTAB160x80 + -D TFT_SPI_PORT=SPI1 + -D TFT_CS=ST7735_CS ; Chip select control + -D TFT_DC=ST7735_RS ; Data Command control pin + -D TFT_RST=ST7735_RESET ; Reset pin + -D TFT_BL=ST7735_BL ; LED back-light + -D TFT_BACKLIGHT_ON=LOW +build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/heltec_mesh_node_t096> +lib_deps = + ${nrf52840_base.lib_deps} + bodmer/TFT_eSPI@2.5.43 ; renovate: datasource=platformio-registry depName=bodmer/TFT_eSPI diff --git a/variants/nrf52840/heltec_mesh_node_t096/variant.cpp b/variants/nrf52840/heltec_mesh_node_t096/variant.cpp new file mode 100644 index 000000000..29158e8ba --- /dev/null +++ b/variants/nrf52840/heltec_mesh_node_t096/variant.cpp @@ -0,0 +1,76 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + Copyright (c) 2016 Sandeep Mistry All right reserved. + Copyright (c) 2018, Adafruit Industries (adafruit.com) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include "variant.h" +#include "nrf.h" +#include "wiring_constants.h" +#include "wiring_digital.h" + +const uint32_t g_ADigitalPinMap[] = { + // P0 - pins 0 and 1 are hardwired for xtal and should never be enabled + 0xff, 0xff, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + + // P1 + 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47}; + +void initVariant() +{ + // LED1 + pinMode(PIN_LED1, OUTPUT); + ledOff(PIN_LED1); +} + +void variant_shutdown() +{ + nrf_gpio_cfg_default(VEXT_ENABLE); + nrf_gpio_cfg_default(ST7735_CS); + nrf_gpio_cfg_default(ST7735_RS); + nrf_gpio_cfg_default(ST7735_SDA); + nrf_gpio_cfg_default(ST7735_SCK); + nrf_gpio_cfg_default(ST7735_RESET); + nrf_gpio_cfg_default(ST7735_BL); + + nrf_gpio_cfg_default(PIN_LED1); + + // nrf_gpio_cfg_default(LORA_PA_POWER); + pinMode(LORA_PA_POWER, OUTPUT); + digitalWrite(LORA_PA_POWER, LOW); + + nrf_gpio_cfg_default(LORA_KCT8103L_PA_CSD); + nrf_gpio_cfg_default(LORA_KCT8103L_PA_CTX); + + pinMode(ADC_CTRL, OUTPUT); + digitalWrite(ADC_CTRL, LOW); + + nrf_gpio_cfg_default(SX126X_CS); + nrf_gpio_cfg_default(SX126X_DIO1); + nrf_gpio_cfg_default(SX126X_BUSY); + nrf_gpio_cfg_default(SX126X_RESET); + + nrf_gpio_cfg_default(PIN_SPI_MISO); + nrf_gpio_cfg_default(PIN_SPI_MOSI); + nrf_gpio_cfg_default(PIN_SPI_SCK); + + nrf_gpio_cfg_default(PIN_GPS_PPS); + nrf_gpio_cfg_default(PIN_GPS_RESET); + nrf_gpio_cfg_default(PIN_GPS_EN); + nrf_gpio_cfg_default(GPS_TX_PIN); + nrf_gpio_cfg_default(GPS_RX_PIN); +} \ No newline at end of file diff --git a/variants/nrf52840/heltec_mesh_node_t096/variant.h b/variants/nrf52840/heltec_mesh_node_t096/variant.h new file mode 100644 index 000000000..04e22af26 --- /dev/null +++ b/variants/nrf52840/heltec_mesh_node_t096/variant.h @@ -0,0 +1,202 @@ +/* + Copyright (c) 2014-2015 Arduino LLC. All right reserved. + Copyright (c) 2016 Sandeep Mistry All right reserved. + Copyright (c) 2018, Adafruit Industries (adafruit.com) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU Lesser General Public License for more details. + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef _VARIANT_HELTEC_NRF_ +#define _VARIANT_HELTEC_NRF_ +/** Master clock frequency */ +#define VARIANT_MCK (64000000ul) + +#define USE_LFXO // Board uses 32khz crystal for LF + +/*---------------------------------------------------------------------------- + * Headers + *----------------------------------------------------------------------------*/ + +#include "WVariant.h" + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +#define VEXT_ENABLE (0 + 26) +#define VEXT_ON_VALUE HIGH + +// ST7735S TFT LCD +#define ST7735_CS (0 + 22) +#define ST7735_RS (0 + 15) // DC +#define ST7735_SDA (0 + 17) // MOSI +#define ST7735_SCK (0 + 20) +#define ST7735_RESET (0 + 13) +#define ST7735_MISO -1 +#define ST7735_BUSY -1 +#define ST7735_BL (32 + 12) +#define SPI_FREQUENCY 40000000 +#define SPI_READ_FREQUENCY 16000000 +#define SCREEN_ROTATE +#define TFT_HEIGHT 160 +#define TFT_WIDTH 80 +#define TFT_OFFSET_X 24 +#define TFT_OFFSET_Y 0 +#define TFT_INVERT false +#define SCREEN_TRANSITION_FRAMERATE 3 // fps +#define DISPLAY_FORCE_SMALL_FONTS + +// Number of pins defined in PinDescription array +#define PINS_COUNT (48) +#define NUM_DIGITAL_PINS (48) +#define NUM_ANALOG_INPUTS (1) +#define NUM_ANALOG_OUTPUTS (0) + +// LEDs +#define PIN_LED1 (0 + 28) // green (confirmed on 1.0 board) +#define LED_BLUE PIN_LED1 // fake for bluefruit library +#define LED_GREEN PIN_LED1 +#define LED_STATE_ON 1 // State when LED is lit + +// #define HAS_NEOPIXEL // Enable the use of neopixels +// #define NEOPIXEL_COUNT 2 // How many neopixels are connected +// #define NEOPIXEL_DATA 14 // gpio pin used to send data to the neopixels +// #define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use + +/* + * Buttons + */ +#define PIN_BUTTON1 (32 + 10) +// #define PIN_BUTTON2 (0 + 18) // 0.18 is labeled on the board as RESET but we configure it in the bootloader as a regular +// GPIO + +/* +No longer populated on PCB +*/ +#define PIN_SERIAL2_RX (0 + 9) +#define PIN_SERIAL2_TX (0 + 10) + +/* + * I2C + */ + +#define WIRE_INTERFACES_COUNT 2 + +// I2C bus 0 +#define PIN_WIRE_SDA (0 + 7) // SDA +#define PIN_WIRE_SCL (0 + 8) // SCL + +// I2C bus 1 +#define PIN_WIRE1_SDA (0 + 4) // SDA (secondary bus) +#define PIN_WIRE1_SCL (0 + 27) // SCL (secondary bus) + +/* + * Lora radio + */ + +#define USE_SX1262 +#define SX126X_CS (0 + 5) // FIXME - we really should define LORA_CS instead +#define LORA_CS (0 + 5) +#define SX126X_DIO1 (0 + 21) +#define SX126X_BUSY (0 + 19) +#define SX126X_RESET (0 + 16) +#define SX126X_DIO2_AS_RF_SWITCH +#define SX126X_DIO3_TCXO_VOLTAGE 1.8 + +// ---- KCT8103L RF FRONT END CONFIGURATION ---- +// The heltec_wireless_tracker_v2 uses a KCT8103L FEM chip with integrated PA and LNA +// RF path: SX1262 -> Pi attenuator -> KCT8103L PA -> Antenna +// Control logic (from KCT8103L datasheet): +// Transmit PA: CSD=1, CTX=1, CPS=1 +// Receive LNA: CSD=1, CTX=0, CPS=X (21dB gain, 1.9dB NF) +// Receive bypass: CSD=1, CTX=1, CPS=0 +// Shutdown: CSD=0, CTX=X, CPS=X +// Pin mapping: +// CPS (pin 5) -> SX1262 DIO2: TX/RX path select (automatic via SX126X_DIO2_AS_RF_SWITCH) +// CSD (pin 4) -> GPIO12: Chip enable (HIGH=on, LOW=shutdown) +// CTX (pin 6) -> GPIO41: Switch between Receive LNA Mode and Receive Bypass Mode. (HIGH=RX bypass, LOW=RX LNA) +// VCC0/VCC1 -> Vfem via U3 LDO, controlled by GPIO30 +// KCT8103L FEM: TX/RX path switching is handled by DIO2 -> CPS pin (via SX126X_DIO2_AS_RF_SWITCH) + +#define USE_KCT8103L_PA +#define LORA_PA_POWER (0 + 30) // VFEM_Ctrl - KCT8103L LDO power enable +#define LORA_KCT8103L_PA_CSD (0 + 12) // CSD - KCT8103L chip enable (HIGH=on) +#define LORA_KCT8103L_PA_CTX \ + (32 + 9) // CTX - Switch between Receive LNA Mode and Receive Bypass Mode. (HIGH=RX bypass, LOW=RX LNA) + +/* + * SPI Interfaces + */ +#define SPI_INTERFACES_COUNT 2 + +// For LORA, spi 0 +#define PIN_SPI_MISO (0 + 14) +#define PIN_SPI_MOSI (0 + 11) +#define PIN_SPI_SCK (32 + 8) + +#define PIN_SPI1_MISO \ + ST7735_MISO // FIXME not really needed, but for now the SPI code requires something to be defined, pick an used GPIO +#define PIN_SPI1_MOSI ST7735_SDA +#define PIN_SPI1_SCK ST7735_SCK + +/* + * GPS pins + */ +#define GPS_UC6580 +#define GPS_BAUDRATE 115200 +#define PIN_GPS_RESET (32 + 14) // An output to reset UC6580 GPS. As per datasheet, low for > 100ms will reset the UC6580 +#define GPS_RESET_MODE LOW +#define PIN_GPS_EN (0 + 6) +#define GPS_EN_ACTIVE LOW +#define PERIPHERAL_WARMUP_MS 1000 // Make sure I2C QuickLink has stable power before continuing +#define PIN_GPS_PPS (32 + 11) +#define GPS_TX_PIN (0 + 25) // This is for bits going TOWARDS the CPU +#define GPS_RX_PIN (0 + 23) // This is for bits going TOWARDS the GPS + +#define GPS_THREAD_INTERVAL 50 + +#define PIN_SERIAL1_RX GPS_RX_PIN +#define PIN_SERIAL1_TX GPS_TX_PIN + +#define ADC_CTRL (32 + 15) +#define ADC_CTRL_ENABLED HIGH +#define BATTERY_PIN (0 + 3) +#define ADC_RESOLUTION 14 + +#define BATTERY_SENSE_RESOLUTION_BITS 12 +#define BATTERY_SENSE_RESOLUTION 4096.0 +#undef AREF_VOLTAGE +#define AREF_VOLTAGE 3.0 +#define VBAT_AR_INTERNAL AR_INTERNAL_3_0 +#define ADC_MULTIPLIER (4.916F) + +// rf52840 AIN1 = Pin 3 +#define BATTERY_LPCOMP_INPUT NRF_LPCOMP_INPUT_1 + +// We have AIN1 with a VBAT divider so AIN1 = VBAT * (100/490) +// We have the device going deep sleep under 3.1V, which is AIN1 = 0.63V +// So we can wake up when VBAT>=VDD is restored to 3.3V, where AIN2 = 0.67V +// Ratio 0.67/3.3 = 0.20, so we can pick a bit higher, 2/8 VDD, which means +// VBAT=4.04V +#define BATTERY_LPCOMP_THRESHOLD NRF_LPCOMP_REF_SUPPLY_2_8 + +#define HAS_RTC 0 +#ifdef __cplusplus +} +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#endif From bfaf6c6b20d70ae3cdb57ccdd4be21ba71a1c07a Mon Sep 17 00:00:00 2001 From: Tom <116762865+NomDeTom@users.noreply.github.com> Date: Sun, 22 Mar 2026 18:47:52 +0000 Subject: [PATCH 4/4] fix(routing): prevent licensed users from rebroadcasting packets to or from unlicensed users (#9958) * fix(routing): prevent licensed users from rebroadcasting packets from unlicensed or unknown users * fix(routing): prevent licensed users from rebroadcasting packets to or from unlicensed users --------- Co-authored-by: Ben Meadors --- src/modules/RoutingModule.cpp | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/src/modules/RoutingModule.cpp b/src/modules/RoutingModule.cpp index d87cf3a44..85e7f8c06 100644 --- a/src/modules/RoutingModule.cpp +++ b/src/modules/RoutingModule.cpp @@ -20,10 +20,11 @@ bool RoutingModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, mesh if ((nodeDB->getMeshNode(mp.from) == NULL || !nodeDB->getMeshNode(mp.from)->has_user) && (nodeDB->getMeshNode(mp.to) == NULL || !nodeDB->getMeshNode(mp.to)->has_user)) return false; - } else if (owner.is_licensed && nodeDB->getLicenseStatus(mp.from) == UserLicenseStatus::NotLicensed) { - // Don't let licensed users to rebroadcast packets from unlicensed users + } else if (owner.is_licensed && ((nodeDB->getLicenseStatus(mp.from) == UserLicenseStatus::NotLicensed) || + (nodeDB->getLicenseStatus(mp.to) == UserLicenseStatus::NotLicensed))) { + // Don't let licensed users to rebroadcast packets to or from unlicensed users // If we know they are in-fact unlicensed - LOG_DEBUG("Packet from unlicensed user, ignoring packet"); + LOG_DEBUG("Packet to or from unlicensed user, ignoring packet"); return false; }