ElixirForge/firmware
1
0
Fork 0
mirror of https://github.com/alexhopeoconnor/firmware.git synced 2026-10-22 03:02:08 +10:00
Code Releases Activity

Merge branch 'master' into crowpanelV2

Browse Source
This commit is contained in:
Manuel
2026-02-02 13:01:04 +01:00
committed by GitHub
parent 86fa917362 e9d4485bb5
commit 4570163190
398 changed files with 7867 additions and 2589 deletions
Download Patch File Download Diff File Expand all files Collapse all files
variants/esp32/chatter2/platformio.ini
+4 -1
View File
@@ -6,8 +6,11 @@ build_flags =
${esp32_base.build_flags}
-D CHATTER_2
-I variants/esp32/chatter2
-DMESHTASTIC_EXCLUDE_WEBSERVER=1
-DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
-ULED_BUILTIN
lib_deps =
${esp32_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.7
lovyan03/LovyanGFX@1.2.19
variants/esp32/chatter2/variant.h
+1 -2
View File
@@ -79,7 +79,7 @@
// lower dB for lower voltage rnage
#define ADC_MULTIPLIER 5.0 // VBATT---10k--pin34---2.5K---GND
// Chatter2 uses 3 AAA cells
#define CELL_TYPE_ALKALINE
#define OCV_ARRAY 1580, 1400, 1350, 1300, 1280, 1250, 1230, 1190, 1150, 1100, 1000
#define NUM_CELLS 3
#undef EXT_PWR_DETECT
@@ -98,7 +98,6 @@
#define KB_LOAD 21 // load values from the switch and store in shift register
#define KB_CLK 22 // clock pin for serial data out
#define KB_DATA 23 // data pin
#define CANNED_MESSAGE_MODULE_ENABLE 1
/////////////////////////////////////////////////////////////////////////////////
// //
variants/esp32/diy/9m2ibr_aprs_lora_tracker/platformio.ini
+3
View File
@@ -10,3 +10,6 @@ build_flags =
-D EBYTE_E22
-D EBYTE_E22_900M30S ; Assume Tx power curve is identical to 900M30S as there is no documentation
-I variants/esp32/diy/9m2ibr_aprs_lora_tracker
build_src_filter =
${esp32_base.build_src_filter}
+<../variants/esp32/diy/9m2ibr_aprs_lora_tracker>
variants/esp32/diy/9m2ibr_aprs_lora_tracker/variant.cpp
+8
View File
@@ -0,0 +1,8 @@
#include "variant.h"
#include "Arduino.h"
void earlyInitVariant()
{
pinMode(USER_LED, OUTPUT);
digitalWrite(USER_LED, HIGH ^ LED_STATE_ON);
}
variants/esp32/diy/hydra/platformio.ini
+1
View File
@@ -14,3 +14,4 @@ build_flags =
${esp32_base.build_flags}
-D DIY_V1
-I variants/esp32/diy/hydra
-ULED_BUILTIN
variants/esp32/diy/v1/platformio.ini
+1
View File
@@ -17,3 +17,4 @@ build_flags =
-D DIY_V1
-D EBYTE_E22
-I variants/esp32/diy/v1
-ULED_BUILTIN
variants/esp32/esp32-common.ini
+3 -2
View File
@@ -49,6 +49,7 @@ build_flags =
-DLIBPAX_BLE
-DHAS_UDP_MULTICAST=1
;-DDEBUG_HEAP
-DCAN_RECLOCK_I2C
lib_deps =
${arduino_base.lib_deps}
@@ -58,13 +59,13 @@ lib_deps =
${environmental_extra.lib_deps}
${radiolib_base.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
https://github.com/meshtastic/esp32_https_server/archive/b0f3960b3e8444563280656d88e22b5899481884.zip
# renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
h2zero/NimBLE-Arduino@^1.4.3
# renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
# renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
https://github.com/lewisxhe/XPowersLib/archive/v0.3.3.zip
# renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
rweather/Crypto@0.4.0
variants/esp32/esp32.ini
+19
View File
@@ -7,3 +7,22 @@ custom_esp32_kind = esp32
build_flags =
${esp32_common.build_flags}
-DMESHTASTIC_EXCLUDE_AUDIO=1
; Override lib_deps to use environmental_extra_no_bsec instead of environmental_extra
; BSEC library uses ~3.5KB DRAM which causes overflow on original ESP32 targets
lib_deps =
${arduino_base.lib_deps}
${networking_base.lib_deps}
${networking_extra.lib_deps}
${environmental_base.lib_deps}
${environmental_extra_no_bsec.lib_deps}
${radiolib_base.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
https://github.com/meshtastic/esp32_https_server/archive/b0f3960b3e8444563280656d88e22b5899481884.zip
# renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
h2zero/NimBLE-Arduino@^1.4.3
# renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
# renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
https://github.com/lewisxhe/XPowersLib/archive/v0.3.3.zip
# renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
rweather/Crypto@0.4.0
variants/esp32/heltec_wireless_bridge/platformio.ini
+3 -2
View File
@@ -1,9 +1,9 @@
[env:heltec-wireless-bridge]
;build_type = debug ; to make it possible to step through our jtag debugger
;build_type = debug ; to make it possible to step through our jtag debugger
extends = esp32_base
board_level = extra
board = heltec_wifi_lora_32
build_flags =
build_flags =
${esp32_base.build_flags}
-I variants/esp32/heltec_wireless_bridge
-D HELTEC_WIRELESS_BRIDGE
@@ -13,6 +13,7 @@ build_flags =
-D MESHTASTIC_EXCLUDE_CANNEDMESSAGES=1
-D MESHTASTIC_EXCLUDE_DETECTIONSENSOR=1
-D MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
-D MESHTASTIC_EXCLUDE_AIR_QUALITY_SENSOR=1
-D MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR_EXTERNAL=1
-D MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION=1
-D MESHTASTIC_EXCLUDE_GPS=1
variants/esp32/m5stack_core/platformio.ini
+3 -2
View File
@@ -16,6 +16,8 @@ build_flags =
${esp32_base.build_flags}
-I variants/esp32/m5stack_core
-DM5STACK
-DMESHTASTIC_EXCLUDE_WEBSERVER=1
-DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
-DUSER_SETUP_LOADED
-DTFT_SDA_READ
-DTFT_DRIVER=0x9341
@@ -28,10 +30,9 @@ build_flags =
-DTFT_BL=32
-DSPI_FREQUENCY=40000000
-DSPI_READ_FREQUENCY=16000000
-DDISABLE_ALL_LIBRARY_WARNINGS
lib_ignore =
m5stack-core
lib_deps =
${esp32_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.7
lovyan03/LovyanGFX@1.2.19
variants/esp32/m5stack_coreink/platformio.ini
+2 -2
View File
@@ -19,9 +19,9 @@ build_flags =
lib_deps =
${esp32_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.5
zinggjm/GxEPD2@1.6.6
# renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
lewisxhe/SensorLib@0.3.3
lewisxhe/SensorLib@0.3.4
lib_ignore =
m5stack-coreink
monitor_filters = esp32_exception_decoder
variants/esp32/m5stack_coreink/variant.h
-1
View File
@@ -15,7 +15,6 @@
// PCF8563 RTC Module
#define PCF8563_RTC 0x51
#define HAS_RTC 1
// Wheel
// Down 37
variants/esp32/nano-g1-explorer/platformio.ini
+1
View File
@@ -14,3 +14,4 @@ build_flags =
${esp32_base.build_flags}
-D NANO_G1_EXPLORER
-I variants/esp32/nano-g1-explorer
-ULED_BUILTIN
variants/esp32/nano-g1/platformio.ini
+1
View File
@@ -14,3 +14,4 @@ build_flags =
${esp32_base.build_flags}
-D NANO_G1
-I variants/esp32/nano-g1
-ULED_BUILTIN
variants/esp32/radiomaster_900_bandit/platformio.ini
+1
View File
@@ -9,6 +9,7 @@ build_flags =
-DHAS_STK8XXX=1
-O2
-I variants/esp32/radiomaster_900_bandit
-ULED_BUILTIN
board_build.f_cpu = 240000000L
upload_protocol = esptool
lib_deps =
variants/esp32/radiomaster_900_bandit_micro/platformio.ini
+1
View File
@@ -13,5 +13,6 @@ build_flags =
-DCONFIG_DISABLE_HAL_LOCKS=1
-O2
-I variants/esp32/radiomaster_900_bandit_nano
-ULED_BUILTIN
board_build.f_cpu = 240000000L
upload_protocol = esptool
variants/esp32/radiomaster_900_bandit_nano/platformio.ini
+1
View File
@@ -16,5 +16,6 @@ build_flags =
-DCONFIG_DISABLE_HAL_LOCKS=1
-O2
-I variants/esp32/radiomaster_900_bandit_nano
-ULED_BUILTIN
board_build.f_cpu = 240000000L
upload_protocol = esptool
variants/esp32/rak11200/pins_arduino.h
-2
View File
@@ -6,8 +6,6 @@
#define LED_GREEN 12
#define LED_BLUE 2
#define LED_BUILTIN LED_GREEN
static const uint8_t TX = 1;
static const uint8_t RX = 3;
variants/esp32/rak11200/variant.h
-2
View File
@@ -6,8 +6,6 @@
#define LED_GREEN 12
#define LED_BLUE 2
#define LED_BUILTIN LED_GREEN
static const uint8_t TX = 1;
static const uint8_t RX = 3;
variants/esp32/station-g1/platformio.ini
+1
View File
@@ -14,3 +14,4 @@ build_flags =
${esp32_base.build_flags}
-D STATION_G1
-I variants/esp32/station-g1
-ULED_BUILTIN
variants/esp32/tbeam/platformio.ini
+2 -1
View File
@@ -18,6 +18,7 @@ build_flags = ${esp32_base.build_flags}
-I variants/esp32/tbeam
-DBOARD_HAS_PSRAM
-mfix-esp32-psram-cache-issue
-ULED_BUILTIN
upload_speed = 921600
[env:tbeam-displayshield]
@@ -32,4 +33,4 @@ lib_deps =
# renovate: datasource=github-tags depName=meshtastic-st7796 packageName=meshtastic/st7796
https://github.com/meshtastic/st7796/archive/1.0.5.zip
# renovate: datasource=custom.pio depName=lewisxhe-SensorLib packageName=lewisxhe/library/SensorLib
lewisxhe/SensorLib@0.3.3
lewisxhe/SensorLib@0.3.4
variants/esp32/tbeam/variant.h
-1
View File
@@ -57,7 +57,6 @@
#ifndef TOUCH_IRQ
#define TOUCH_IRQ -1
#endif
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define USE_VIRTUAL_KEYBOARD 1
#define ST7796_NSS 25
variants/esp32/tlora_v2_1_16/platformio.ini
+1 -1
View File
@@ -12,7 +12,7 @@ extends = esp32_base
board = ttgo-lora32-v21
board_check = true
build_flags =
${esp32_base.build_flags} -D TLORA_V2_1_16 -I variants/esp32/tlora_v2_1_16
${esp32_base.build_flags} -D TLORA_V2_1_16 -I variants/esp32/tlora_v2_1_16 -ULED_BUILTIN
upload_speed = 115200
[env:sugarcube]
variants/esp32/tlora_v3_3_0_tcxo/platformio.ini
+2 -1
View File
@@ -6,4 +6,5 @@ build_flags =
-D TLORA_V2_1_16
-I variants/esp32/tlora_v2_1_16
-D LORA_TCXO_GPIO=12
-D BUTTON_PIN=0
-D BUTTON_PIN=0
-ULED_BUILTIN
variants/esp32/trackerd/variant.h
-1
View File
@@ -10,7 +10,6 @@
#define LED_PIN 13 // 13 red, 2 blue, 15 red
// #define HAS_BUTTON 0
#define BUTTON_PIN 0
#define BUTTON_NEED_PULLUP
variants/esp32/wiphone/platformio.ini
+1 -1
View File
@@ -11,7 +11,7 @@ build_flags =
lib_deps =
${esp32_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.7
lovyan03/LovyanGFX@1.2.19
# renovate: datasource=custom.pio depName=SX1509 IO Expander packageName=sparkfun/library/SX1509 IO Expander
sparkfun/SX1509 IO Expander@3.0.6
# renovate: datasource=custom.pio depName=APA102 packageName=pololu/library/APA102
variants/esp32c6/esp32c6.ini
+1 -1
View File
@@ -28,7 +28,7 @@ lib_deps =
${environmental_extra.lib_deps}
${radiolib_base.lib_deps}
# renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
lewisxhe/XPowersLib@0.3.2
lewisxhe/XPowersLib@0.3.3
# renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
# renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
variants/esp32c6/m5stack_unitc6l/platformio.ini
+2
View File
@@ -10,6 +10,8 @@ custom_meshtastic_tags = M5Stack
extends = esp32c6_base
board = esp32-c6-devkitc-1
board_upload.flash_size = 16MB
board_build.partitions = default_16MB.csv
;OpenOCD flash method
;upload_protocol = esp-builtin
;Normal method
variants/esp32c6/m5stack_unitc6l/variant.h
+2
View File
@@ -50,3 +50,5 @@ void c6l_init();
#endif
#define SCREEN_TRANSITION_FRAMERATE 10
#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
#define SERIAL_PRINT_PORT 1
variants/esp32c6/tlora_c6/platformio.ini
+1
View File
@@ -8,3 +8,4 @@ build_flags =
-I variants/esp32c6/tlora_c6
-DARDUINO_USB_CDC_ON_BOOT=1
-DARDUINO_USB_MODE=1
-ULED_BUILTIN
variants/esp32c6/tlora_c6/variant.h
+2
View File
@@ -19,3 +19,5 @@
#define SX126X_TXEN 14
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define SERIAL_PRINT_PORT 1
variants/esp32s3/CDEBYTE_EoRa-Hub/pins_arduino.h
+28
View File
@@ -0,0 +1,28 @@
// Need this file for ESP32-S3
// No need to modify this file, changes to pins imported from variant.h
// Most is similar to https://github.com/espressif/arduino-esp32/blob/master/variants/esp32s3/pins_arduino.h
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include <stdint.h>
#include <variant.h>
#define USB_VID 0x303a
#define USB_PID 0x1001
// Serial
static const uint8_t TX = UART_TX;
static const uint8_t RX = UART_RX;
// Default SPI will be mapped to Radio
static const uint8_t SS = LORA_CS;
static const uint8_t SCK = LORA_SCK;
static const uint8_t MOSI = LORA_MOSI;
static const uint8_t MISO = LORA_MISO;
// The default Wire will be mapped to PMU and RTC
static const uint8_t SCL = I2C_SCL;
static const uint8_t SDA = I2C_SDA;
#endif /* Pins_Arduino_h */
variants/esp32s3/CDEBYTE_EoRa-Hub/platformio.ini
+8
View File
@@ -0,0 +1,8 @@
[env:CDEBYTE_EoRa-Hub]
extends = esp32s3_base
board = CDEBYTE_EoRa-Hub
board_level = extra
build_flags =
${esp32s3_base.build_flags}
-D PRIVATE_HW
-I variants/esp32s3/CDEBYTE_EoRa-Hub
variants/esp32s3/CDEBYTE_EoRa-Hub/rfswitch.h
+20
View File
@@ -0,0 +1,20 @@
#include "RadioLib.h"
// This is rewritten to match the requirements of the E80-900M2213S
// The E80 does not conform to the reference Semtech switches(!) and therefore needs a custom matrix.
// See footnote #3 in "https://www.cdebyte.com/products/E80-900M2213S/2#Pin"
// RF Switch Matrix SubG RFO_HP_LF / RFO_LP_LF / RFI_[NP]_LF0
// DIO5 -> RFSW0_V1
// DIO6 -> RFSW1_V2
// DIO7 -> not connected on E80 module - note that GNSS and Wifi scanning are not possible.
static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_LR11X0_DIO7, RADIOLIB_NC,
RADIOLIB_NC};
static const Module::RfSwitchMode_t rfswitch_table[] = {
// mode DIO5 DIO6 DIO7
{LR11x0::MODE_STBY, {LOW, LOW, LOW}}, {LR11x0::MODE_RX, {LOW, HIGH, LOW}},
{LR11x0::MODE_TX, {HIGH, HIGH, LOW}}, {LR11x0::MODE_TX_HP, {HIGH, LOW, LOW}},
{LR11x0::MODE_TX_HF, {LOW, LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW, HIGH}},
{LR11x0::MODE_WIFI, {LOW, LOW, LOW}}, END_OF_MODE_TABLE,
};
variants/esp32s3/CDEBYTE_EoRa-Hub/variant.h
+50
View File
@@ -0,0 +1,50 @@
// EByte EoRA-Hub
// Uses E80 (LR1121) LoRa module
#define LED_PIN 35
// Button - user interface
#define BUTTON_PIN 0 // BOOT button
#define BATTERY_PIN 1
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_MULTIPLIER 103.0 // Calibrated value
#define ADC_ATTENUATION ADC_ATTEN_DB_0
#define ADC_CTRL 37
#define ADC_CTRL_ENABLED LOW
// Display - OLED connected via I2C by the default hardware configuration
#define HAS_SCREEN 1
#define USE_SSD1306
#define I2C_SCL 17
#define I2C_SDA 18
// UART - The 1mm JST SH connector closest to the USB-C port
#define UART_TX 43
#define UART_RX 44
// Peripheral I2C - The 1mm JST SH connector furthest from the USB-C port which follows Adafruit connection standard. There are no
// pull-up resistors on these lines, the downstream device needs to include them. TODO: test, currently untested
#define I2C_SCL1 21
#define I2C_SDA1 10
// Radio
#define USE_LR1121
#define LORA_SCK 9
#define LORA_MOSI 10
#define LORA_MISO 11
#define LORA_RESET 12
#define LORA_CS 8
#define LORA_DIO9 13
// LR1121
#define LR1121_IRQ_PIN 14
#define LR1121_NRESET_PIN LORA_RESET
#define LR1121_BUSY_PIN LORA_DIO9
#define LR1121_SPI_NSS_PIN LORA_CS
#define LR1121_SPI_SCK_PIN LORA_SCK
#define LR1121_SPI_MOSI_PIN LORA_MOSI
#define LR1121_SPI_MISO_PIN LORA_MISO
#define LR11X0_DIO3_TCXO_VOLTAGE 1.8
#define LR11X0_DIO_AS_RF_SWITCH
variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini
+4
View File
@@ -11,6 +11,10 @@ custom_meshtastic_requires_dfu = false
extends = esp32s3_base
board = ESP32-S3-WROOM-1-N4
build_src_filter =
${esp32s3_base.build_src_filter}
+<../variants/esp32s3/ELECROW-ThinkNode-M5>
build_flags =
${esp32s3_base.build_flags}
-D ELECROW_ThinkNode_M5
variants/esp32s3/ELECROW-ThinkNode-M5/variant.cpp
+12
View File
@@ -0,0 +1,12 @@
#include "variant.h"
#include <PCA9557.h>
PCA9557 io(0x18, &Wire);
void earlyInitVariant()
{
Wire.begin(48, 47);
io.pinMode(PCA_PIN_EINK_EN, OUTPUT);
io.pinMode(PCA_PIN_POWER_EN, OUTPUT);
io.digitalWrite(PCA_PIN_POWER_EN, HIGH);
}
variants/esp32s3/ELECROW-ThinkNode-M5/variant.h
+4
View File
@@ -4,6 +4,8 @@
#define UART_TX 43
#define UART_RX 44
#define HAS_PCA9557
// LED
// Both of these are on the GPIO expander
#define PCA_LED_USER 1 // the Blue LED
@@ -79,4 +81,6 @@
#define BUTTON_PIN PIN_BUTTON1
#define BUTTON_PIN_ALT PIN_BUTTON2
#define SERIAL_PRINT_PORT 0
#endif
variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini
+1 -1
View File
@@ -11,7 +11,7 @@ upload_speed = 921600
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.5
zinggjm/GxEPD2@1.6.6
# renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
adafruit/Adafruit NeoPixel@1.15.2
build_unflags =
variants/esp32s3/esp32-s3-pico/platformio.ini
+1 -1
View File
@@ -23,6 +23,6 @@ build_flags = ${esp32s3_base.build_flags}
lib_deps = ${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.5
zinggjm/GxEPD2@1.6.6
# renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
adafruit/Adafruit NeoPixel@1.15.2
variants/esp32s3/hackaday-communicator/platformio.ini
+5 -1
View File
@@ -6,6 +6,10 @@ board_check = true
board_build.partitions = default_16MB.csv
upload_protocol = esptool
build_src_filter =
${esp32s3_base.build_src_filter}
+<../variants/esp32s3/hackaday-communicator>
build_flags = ${esp32s3_base.build_flags}
-D HACKADAY_COMMUNICATOR
-D BOARD_HAS_PSRAM
@@ -13,4 +17,4 @@ build_flags = ${esp32s3_base.build_flags}
lib_deps = ${esp32s3_base.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-Arduino_GFX packageName=https://github.com/meshtastic/Arduino_GFX gitBranch=master
https://github.com/meshtastic/Arduino_GFX/archive/054e81ffaf23784830a734e3c184346789349406.zip
https://github.com/meshtastic/Arduino_GFX/archive/054e81ffaf23784830a734e3c184346789349406.zip
variants/esp32s3/hackaday-communicator/variant.cpp
+6
View File
@@ -0,0 +1,6 @@
#include "variant.h"
#include "Arduino.h"
void earlyInitVariant()
{
pinMode(KB_INT, INPUT);
}
variants/esp32s3/hackaday-communicator/variant.h
+2 -13
View File
@@ -16,22 +16,12 @@
#define SLEEP_TIME 120
#define GPS_DEFAULT_NOT_PRESENT 1
// #define GPS_RX_PIN 44
// #define GPS_TX_PIN 43
// #define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
// ratio of voltage divider = 2.0 (RD2=100k, RD3=100k)
// #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
// #define ADC_CHANNEL ADC1_GPIO4_CHANNEL
// keyboard
#define I2C_SDA 47 // I2C pins for this board
#define I2C_SCL 14
// #define KB_POWERON -1 // must be set to HIGH
// #define KB_SLAVE_ADDRESS TDECK_KB_ADDR // 0x55
// #define KB_BL_PIN 46 // not used for now
#define KB_INT 13
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define TFT_DC 39
#define TFT_CS 41
@@ -44,11 +34,9 @@
#define LORA_MOSI 3
#define LORA_CS 17
// #define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 18
#define LORA_DIO1 16 // SX1262 IRQ
#define LORA_DIO2 15 // SX1262 BUSY
// #define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
#define SX126X_CS LORA_CS
#define SX126X_DIO1 LORA_DIO1
@@ -58,4 +46,5 @@
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// #define LED_PIN 1
#define LED_NOTIFICATION 1
#define LED_STATE_ON 0
variants/esp32s3/heltec_capsule_sensor_v3/platformio.ini
+1
View File
@@ -6,4 +6,5 @@ board_build.partitions = default_8MB.csv
build_flags =
${esp32s3_base.build_flags} -I variants/esp32s3/heltec_capsule_sensor_v3
-D HELTEC_CAPSULE_SENSOR_V3
-ULED_BUILTIN
;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
variants/esp32s3/heltec_sensor_hub/platformio.ini
+1
View File
@@ -7,6 +7,7 @@ build_flags =
${esp32s3_base.build_flags}
-I variants/esp32s3/heltec_sensor_hub
-D HELTEC_SENSOR_HUB
-ULED_BUILTIN
lib_deps = ${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
variants/esp32s3/heltec_v3/platformio.ini
+1
View File
@@ -18,3 +18,4 @@ build_flags =
${esp32s3_base.build_flags}
-D HELTEC_V3
-I variants/esp32s3/heltec_v3
-ULED_BUILTIN
variants/esp32s3/heltec_v4/pins_arduino.h
-4
View File
@@ -6,10 +6,6 @@
#define USB_VID 0x303a
#define USB_PID 0x1001
static const uint8_t LED_BUILTIN = 35;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN // allow testing #ifdef LED_BUILTIN
static const uint8_t TX = 43;
static const uint8_t RX = 44;
variants/esp32s3/heltec_v4/platformio.ini
+12 -1
View File
@@ -34,6 +34,17 @@ build_flags =
-D I2C_SCL1=3
[env:heltec-v4-tft]
custom_meshtastic_hw_model = 110
custom_meshtastic_hw_model_slug = HELTEC_V4
custom_meshtastic_architecture = esp32-s3
custom_meshtastic_actively_supported = true
custom_meshtastic_support_level = 1
custom_meshtastic_display_name = Heltec V4 TFT
custom_meshtastic_images = heltec_v4.svg
custom_meshtastic_tags = Heltec
custom_meshtastic_requires_dfu = true
custom_meshtastic_partition_scheme = 16MB
extends = heltec_v4_base
build_flags =
${heltec_v4_base.build_flags} ;-Os
@@ -115,7 +126,7 @@ build_flags =
lib_deps = ${heltec_v4_base.lib_deps}
; ${device-ui_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.0
lovyan03/LovyanGFX@1.2.19
# renovate: datasource=git-refs depName=Quency-D_chsc6x packageName=https://github.com/Quency-D/chsc6x gitBranch=master
https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
; TODO revert to official device-ui (when merged)
variants/esp32s3/heltec_vision_master_e213/pins_arduino.h
-4
View File
@@ -3,10 +3,6 @@
#include <stdint.h>
static const uint8_t LED_BUILTIN = 45; // LED is not populated on earliest board variant
#define BUILTIN_LED LED_BUILTIN // Backward compatibility
#define LED_BUILTIN LED_BUILTIN
static const uint8_t TX = 43;
static const uint8_t RX = 44;
variants/esp32s3/heltec_vision_master_e290/pins_arduino.h
-4
View File
@@ -3,10 +3,6 @@
#include <stdint.h>
static const uint8_t LED_BUILTIN = 45; // LED is not populated on earliest board variant
#define BUILTIN_LED LED_BUILTIN // Backward compatibility
#define LED_BUILTIN LED_BUILTIN
static const uint8_t TX = 43;
static const uint8_t RX = 44;
variants/esp32s3/heltec_vision_master_t190/pins_arduino.h
-4
View File
@@ -3,10 +3,6 @@
#include <stdint.h>
static const uint8_t LED_BUILTIN = 35;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN
static const uint8_t TX = 43;
static const uint8_t RX = 44;
variants/esp32s3/heltec_wireless_paper/pins_arduino.h
-4
View File
@@ -3,10 +3,6 @@
#include <stdint.h>
static const uint8_t LED_BUILTIN = 18;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN
static const uint8_t TX = 43;
static const uint8_t RX = 44;
variants/esp32s3/heltec_wireless_paper_v1/pins_arduino.h
-4
View File
@@ -3,10 +3,6 @@
#include <stdint.h>
static const uint8_t LED_BUILTIN = 18;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN
static const uint8_t KEY_BUILTIN = 0;
static const uint8_t TX = 43;
variants/esp32s3/heltec_wireless_tracker/pins_arduino.h
-4
View File
@@ -11,10 +11,6 @@
#define USB_VID 0x303a
#define USB_PID 0x1001
static const uint8_t LED_BUILTIN = 18;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN
static const uint8_t TX = 43;
static const uint8_t RX = 44;
variants/esp32s3/heltec_wireless_tracker/platformio.ini
+1 -1
View File
@@ -24,4 +24,4 @@ build_flags =
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.7
lovyan03/LovyanGFX@1.2.19
variants/esp32s3/heltec_wireless_tracker_V1_0/pins_arduino.h
-4
View File
@@ -11,10 +11,6 @@
#define USB_VID 0x303a
#define USB_PID 0x1001
static const uint8_t LED_BUILTIN = 18;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN
static const uint8_t TX = 43;
static const uint8_t RX = 44;
variants/esp32s3/heltec_wireless_tracker_V1_0/platformio.ini
+1 -1
View File
@@ -22,4 +22,4 @@ build_flags =
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.7
lovyan03/LovyanGFX@1.2.19
variants/esp32s3/heltec_wireless_tracker_v2/pins_arduino.h
-4
View File
@@ -10,10 +10,6 @@
#define USB_VID 0x303a
#define USB_PID 0x1001
static const uint8_t LED_BUILTIN = 18;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN
static const uint8_t TX = 43;
static const uint8_t RX = 44;
variants/esp32s3/heltec_wireless_tracker_v2/platformio.ini
+10 -1
View File
@@ -1,8 +1,17 @@
[env:heltec-wireless-tracker-v2]
custom_meshtastic_support_level = 1
custom_meshtastic_images = heltec_wireless_tracker_v2.svg
custom_meshtastic_tags = Heltec
extends = esp32s3_base
board = heltec_wireless_tracker_v2
board_build.partitions = default_8MB.csv
upload_protocol = esptool
custom_meshtastic_hw_model = 113
custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_TRACKER_V2
custom_meshtastic_architecture = esp32s3
custom_meshtastic_display_name = Heltec Wireless Tracker V2
custom_meshtastic_actively_supported = true
build_flags =
${esp32s3_base.build_flags}
@@ -11,4 +20,4 @@ build_flags =
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.7
lovyan03/LovyanGFX@1.2.19
variants/esp32s3/heltec_wsl_v3/platformio.ini
+1
View File
@@ -17,3 +17,4 @@ build_flags =
${esp32s3_base.build_flags}
-D HELTEC_WSL_V3
-I variants/esp32s3/heltec_wsl_v3
-ULED_BUILTIN
variants/esp32s3/m5stack_cores3/pins_arduino.h
+1 -4
View File
@@ -10,10 +10,7 @@
// Some boards have too low voltage on this pin (board design bug)
// Use different pin with 3V and connect with 48
// and change this setup for the chosen pin (for example 38)
static const uint8_t LED_BUILTIN = SOC_GPIO_PIN_COUNT + 48;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN
#define RGB_BUILTIN LED_BUILTIN
#define RGB_BUILTIN SOC_GPIO_PIN_COUNT + 48
#define RGB_BRIGHTNESS 64
static const uint8_t TX = 43;
variants/esp32s3/mesh-tab/pins_arduino.h
-4
View File
@@ -49,10 +49,6 @@ static const uint8_t T14 = 14;
static const uint8_t VBAT_SENSE = 2;
static const uint8_t VBUS_SENSE = 34;
// User LED
#define LED_BUILTIN 13
#define BUILTIN_LED LED_BUILTIN // backward compatibility
static const uint8_t RGB_DATA = 40;
// RGB_BUILTIN and RGB_BRIGHTNESS can be used in new Arduino API neopixelWrite()
#define RGB_BUILTIN (RGB_DATA + SOC_GPIO_PIN_COUNT)
variants/esp32s3/mesh-tab/platformio.ini
+1 -1
View File
@@ -51,7 +51,7 @@ lib_deps =
${esp32s3_base.lib_deps}
${device-ui_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.7
lovyan03/LovyanGFX@1.2.19
[mesh_tab_xpt2046]
extends = mesh_tab_base
variants/esp32s3/nugget_s3_lora/variant.h
+14 -3
View File
@@ -12,7 +12,7 @@
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
// Button A (44), B (43), R (12), U (13), L (11), D (18)
#define BUTTON_PIN 44 // If defined, this will be used for user button presses
#define BUTTON_PIN 43 // If defined, this will be used for user button presses
#define BUTTON_NEED_PULLUP
#define USE_RF95
@@ -20,8 +20,19 @@
#define LORA_MISO 7
#define LORA_MOSI 8
#define LORA_CS 9
#define LORA_DIO0 16 // a No connect on the SX1262 module
#define LORA_DIO0 16
#define LORA_RESET 4
#define LORA_DIO1 RADIOLIB_NC
#define LORA_DIO2 RADIOLIB_NC
#define LORA_DIO2 RADIOLIB_NC
// jk, its not really a trackball but we're gonna pretend!
#define HAS_TRACKBALL 1
#define TB_UP 13
#define TB_DOWN 18
#define TB_LEFT 11
#define TB_RIGHT 12
#define TB_PRESS 44 // BUTTON_PIN
#define TB_DIRECTION FALLING
#define ENABLE_AMBIENTLIGHTING
variants/esp32s3/picomputer-s3/platformio.ini
+1 -1
View File
@@ -24,7 +24,7 @@ build_flags =
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.7
lovyan03/LovyanGFX@1.2.19
build_src_filter =
${esp32s3_base.build_src_filter}
variants/esp32s3/picomputer-s3/variant.h
-2
View File
@@ -52,8 +52,6 @@
// Picomputer gets a white on black display
#define TFT_MESH_OVERRIDE COLOR565(255, 255, 255)
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define INPUTBROKER_MATRIX_TYPE 1
#define KEYS_COLS \
variants/esp32s3/rak3312/pins_arduino.h
-3
View File
@@ -24,9 +24,6 @@ static const uint8_t SCK = 13;
#define SPI_MISO (10)
#define SPI_CS (12)
// LEDs
#define LED_BUILTIN LED_GREEN
#ifdef _VARIANT_RAK3112_
/*
* Serial interfaces
variants/esp32s3/rak3312/variant.h
+1 -2
View File
@@ -22,9 +22,8 @@
#define LED_BLUE 45
#define PIN_LED1 LED_GREEN
#define PIN_LED2 LED_BLUE
#define LED_NOTIFICATION LED_BLUE
#define LED_CONN LED_BLUE
#define LED_PIN LED_GREEN
#define ledOff(pin) pinMode(pin, INPUT)
variants/esp32s3/rak_wismesh_tap_v2/pins_arduino.h
-3
View File
@@ -22,7 +22,4 @@ static const uint8_t SCK = 13;
#define SPI_MISO (10)
#define SPI_CS (12)
// LEDs
#define LED_BUILTIN LED_GREEN
#endif /* Pins_Arduino_h */
variants/esp32s3/rak_wismesh_tap_v2/platformio.ini
+1 -1
View File
@@ -16,7 +16,7 @@ build_flags =
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.7
lovyan03/LovyanGFX@1.2.19
[ft5x06]
extends = mesh_tab_base
variants/esp32s3/rak_wismesh_tap_v2/variant.h
+1 -4
View File
@@ -30,9 +30,8 @@
#define LED_BLUE 45
#define PIN_LED1 LED_GREEN
#define PIN_LED2 LED_BLUE
#define LED_NOTIFICATION LED_BLUE
#define LED_CONN LED_BLUE
#define LED_PIN LED_GREEN
#define ledOff(pin) pinMode(pin, INPUT)
@@ -47,10 +46,8 @@
#define SPI_MISO (10)
#define SPI_CS (12)
#define HAS_BUTTON 1
#define BUTTON_PIN 0
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define USE_VIRTUAL_KEYBOARD 1
#define BATTERY_PIN 1
variants/esp32s3/seeed-sensecap-indicator/pins_arduino.h
-2
View File
@@ -3,8 +3,6 @@
#include <stdint.h>
// static const uint8_t LED_BUILTIN = -1;
// static const uint8_t TX = 43;
// static const uint8_t RX = 44;
variants/esp32s3/t-beam-1w/platformio.ini
+9
View File
@@ -1,5 +1,14 @@
; LilyGo T-Beam-1W (1 Watt LoRa with external PA)
[env:t-beam-1w]
custom_meshtastic_hw_model = 122
custom_meshtastic_hw_model_slug = TBEAM_1_WATT
custom_meshtastic_architecture = esp32s3
custom_meshtastic_actively_supported = true
custom_meshtastic_support_level = 1
custom_meshtastic_display_name = LILYGO T-Beam 1W
custom_meshtastic_images = tbeam-1w.svg
custom_meshtastic_tags = LilyGo
extends = esp32s3_base
board = t-beam-1w
board_build.partitions = default_8MB.csv
variants/esp32s3/t-deck-pro/platformio.ini
+5 -1
View File
@@ -15,6 +15,10 @@ board = t-deck-pro
board_check = true
upload_protocol = esptool
build_src_filter =
${esp32s3_base.build_src_filter}
+<../variants/esp32s3/t-deck-pro>
build_flags =
${esp32s3_base.build_flags} -I variants/esp32s3/t-deck-pro
-D T_DECK_PRO
@@ -29,7 +33,7 @@ build_flags =
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.5
zinggjm/GxEPD2@1.6.6
# renovate: datasource=git-refs depName=CSE_Touch packageName=https://github.com/CIRCUITSTATE/CSE_Touch gitBranch=main
https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
# renovate: datasource=github-tags depName=CSE_CST328 packageName=CIRCUITSTATE/CSE_CST328
variants/esp32s3/t-deck-pro/variant.cpp
+14
View File
@@ -0,0 +1,14 @@
#include "variant.h"
#include "Arduino.h"
void earlyInitVariant()
{
pinMode(LORA_EN, OUTPUT);
digitalWrite(LORA_EN, HIGH);
pinMode(LORA_CS, OUTPUT);
digitalWrite(LORA_CS, HIGH);
pinMode(SDCARD_CS, OUTPUT);
digitalWrite(SDCARD_CS, HIGH);
pinMode(PIN_EINK_CS, OUTPUT);
digitalWrite(PIN_EINK_CS, HIGH);
}
variants/esp32s3/t-deck-pro/variant.h
-1
View File
@@ -43,7 +43,6 @@
// TCA8418 keyboard
#define KB_BL_PIN 42
#define CANNED_MESSAGE_MODULE_ENABLE 1
// microphone PCM5102A
#define PCM5102A_SCK 47
variants/esp32s3/t-deck/pins_arduino.h
-2
View File
@@ -6,8 +6,6 @@
#define USB_VID 0x303a
#define USB_PID 0x1001
// static const uint8_t LED_BUILTIN = -1;
static const uint8_t TX = 43;
static const uint8_t RX = 44;
variants/esp32s3/t-deck/platformio.ini
+5 -1
View File
@@ -17,6 +17,10 @@ board_check = true
board_build.partitions = default_16MB.csv
upload_protocol = esptool
build_src_filter =
${esp32s3_base.build_src_filter}
+<../variants/esp32s3/t-deck>
build_flags = ${esp32s3_base.build_flags}
-D T_DECK
-D BOARD_HAS_PSRAM
@@ -24,7 +28,7 @@ build_flags = ${esp32s3_base.build_flags}
lib_deps = ${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.7
lovyan03/LovyanGFX@1.2.19
# renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
earlephilhower/ESP8266Audio@1.9.9
# renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
variants/esp32s3/t-deck/variant.cpp
+23
View File
@@ -0,0 +1,23 @@
#include "variant.h"
#include "Arduino.h"
void earlyInitVariant()
{
// GPIO10 manages all peripheral power supplies
// Turn on peripheral power immediately after MUC starts.
// If some boards are turned on late, ESP32 will reset due to low voltage.
// ESP32-C3(Keyboard) , MAX98357A(Audio Power Amplifier) ,
// TF Card , Display backlight(AW9364DNR) , AN48841B(Trackball) , ES7210(Decoder)
pinMode(KB_POWERON, OUTPUT);
digitalWrite(KB_POWERON, HIGH);
// T-Deck has all three SPI peripherals (TFT, SD, LoRa) attached to the same SPI bus
// We need to initialize all CS pins in advance otherwise there will be SPI communication issues
// e.g. when detecting the SD card
pinMode(LORA_CS, OUTPUT);
digitalWrite(LORA_CS, HIGH);
pinMode(SDCARD_CS, OUTPUT);
digitalWrite(SDCARD_CS, HIGH);
pinMode(TFT_CS, OUTPUT);
digitalWrite(TFT_CS, HIGH);
delay(100);
}
variants/esp32s3/t-deck/variant.h
+1 -1
View File
@@ -61,7 +61,6 @@
#define KB_POWERON 10 // must be set to HIGH
#define KB_SLAVE_ADDRESS TDECK_KB_ADDR // 0x55
#define KB_BL_PIN 46 // not used for now
#define CANNED_MESSAGE_MODULE_ENABLE 1
// trackball
#define HAS_TRACKBALL 1
@@ -71,6 +70,7 @@
#define TB_RIGHT 2
#define TB_PRESS 0 // BUTTON_PIN
#define TB_DIRECTION FALLING
#define TB_THRESHOLD 3
// microphone
#define ES7210_SCK 47
variants/esp32s3/t-watch-s3/pins_arduino.h
-2
View File
@@ -3,8 +3,6 @@
#include <stdint.h>
// static const uint8_t LED_BUILTIN = -1;
// static const uint8_t TX = 43;
// static const uint8_t RX = 44;
variants/esp32s3/t-watch-s3/platformio.ini
+2 -2
View File
@@ -22,9 +22,9 @@ build_flags = ${esp32s3_base.build_flags}
lib_deps = ${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.7
lovyan03/LovyanGFX@1.2.19
# renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
lewisxhe/SensorLib@0.3.3
lewisxhe/SensorLib@0.3.4
# renovate: datasource=custom.pio depName=Adafruit DRV2605 packageName=adafruit/library/Adafruit DRV2605 Library
adafruit/Adafruit DRV2605 Library@1.2.4
# renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
variants/esp32s3/t-watch-s3/variant.h
+5 -3
View File
@@ -45,7 +45,6 @@
// PCF8563 RTC Module
#define PCF8563_RTC 0x51
#define HAS_RTC 1
#define I2C_SDA 10 // For QMC6310 sensors and screens
#define I2C_SCL 11 // For QMC6310 sensors and screens
@@ -53,10 +52,13 @@
#define HAS_BMA423 1
#define BMA4XX_INT 14 // Interrupt for BMA_423 axis sensor
#define HAS_GPS 1
#define GPS_DEFAULT_NOT_PRESENT 1
#define GPS_BAUDRATE 38400
#define GPS_RX_PIN 42
#define GPS_TX_PIN 41
#define GPS_RX_PIN 41
#define GPS_TX_PIN 42
#define BUTTON_PIN 0 // only for Plus version
#define USE_SX1262
#define USE_SX1268
variants/esp32s3/tbeam-s3-core/platformio.ini
+1 -1
View File
@@ -19,7 +19,7 @@ board_check = true
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
lewisxhe/SensorLib@0.3.3
lewisxhe/SensorLib@0.3.4
build_flags =
${esp32s3_base.build_flags}
variants/esp32s3/tbeam-s3-core/variant.h
-1
View File
@@ -55,7 +55,6 @@
// PCF8563 RTC Module
#define PCF8563_RTC 0x51
#define HAS_RTC 1
// Specify the PMU as Wire1. In the t-beam-s3 core, PCF8563 and PMU share the bus
#define PMU_USE_WIRE1
variants/esp32s3/tlora-pager/platformio.ini
+7 -3
View File
@@ -17,6 +17,10 @@ board_check = true
board_build.partitions = default_16MB.csv
upload_protocol = esptool
build_src_filter =
${esp32s3_base.build_src_filter}
+<../variants/esp32s3/tlora-pager>
build_flags = ${esp32s3_base.build_flags}
-I variants/esp32s3/tlora-pager
-D T_LORA_PAGER
@@ -29,7 +33,7 @@ build_flags = ${esp32s3_base.build_flags}
lib_deps = ${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.7
lovyan03/LovyanGFX@1.2.19
# renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
earlephilhower/ESP8266Audio@1.9.9
# renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
@@ -39,9 +43,9 @@ lib_deps = ${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
lewisxhe/PCF8563_Library@1.0.1
# renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
lewisxhe/SensorLib@0.3.3
lewisxhe/SensorLib@0.3.4
# renovate: datasource=github-tags depName=pschatzmann_arduino-audio-driver packageName=pschatzmann/arduino-audio-driver
https://github.com/pschatzmann/arduino-audio-driver/archive/v0.1.3.zip
https://github.com/pschatzmann/arduino-audio-driver/archive/v0.2.1.zip
# TODO renovate
https://github.com/mverch67/BQ27220/archive/07d92be846abd8a0258a50c23198dac0858b22ed.zip
# TODO renovate
variants/esp32s3/tlora-pager/variant.cpp
+31
View File
@@ -0,0 +1,31 @@
#include "variant.h"
#include "ExtensionIOXL9555.hpp"
extern ExtensionIOXL9555 io;
void earlyInitVariant()
{
pinMode(LORA_CS, OUTPUT);
digitalWrite(LORA_CS, HIGH);
pinMode(SDCARD_CS, OUTPUT);
digitalWrite(SDCARD_CS, HIGH);
pinMode(TFT_CS, OUTPUT);
digitalWrite(TFT_CS, HIGH);
pinMode(KB_INT, INPUT_PULLUP);
// io expander
io.begin(Wire, XL9555_SLAVE_ADDRESS0, SDA, SCL);
io.pinMode(EXPANDS_DRV_EN, OUTPUT);
io.digitalWrite(EXPANDS_DRV_EN, HIGH);
io.pinMode(EXPANDS_AMP_EN, OUTPUT);
io.digitalWrite(EXPANDS_AMP_EN, LOW);
io.pinMode(EXPANDS_LORA_EN, OUTPUT);
io.digitalWrite(EXPANDS_LORA_EN, HIGH);
io.pinMode(EXPANDS_GPS_EN, OUTPUT);
io.digitalWrite(EXPANDS_GPS_EN, HIGH);
io.pinMode(EXPANDS_KB_EN, OUTPUT);
io.digitalWrite(EXPANDS_KB_EN, HIGH);
io.pinMode(EXPANDS_SD_EN, OUTPUT);
io.digitalWrite(EXPANDS_SD_EN, HIGH);
io.pinMode(EXPANDS_GPIO_EN, OUTPUT);
io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
io.pinMode(EXPANDS_SD_PULLEN, INPUT);
}
variants/esp32s3/tlora-pager/variant.h
-2
View File
@@ -40,7 +40,6 @@
// PCF85063 RTC Module
#define PCF85063_RTC 0x51
#define HAS_RTC 1
// Rotary
#define ROTARY_A (40)
@@ -61,7 +60,6 @@
#define I2C_NO_RESCAN
#define KB_BL_PIN 46
#define KB_INT 6
#define CANNED_MESSAGE_MODULE_ENABLE 1
// audio codec ES8311
#define HAS_I2S
variants/esp32s3/tracksenger/internal/pins_arduino.h
-4
View File
@@ -11,10 +11,6 @@
#define USB_VID 0x303a
#define USB_PID 0x1001
static const uint8_t LED_BUILTIN = 18;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN
static const uint8_t TX = 43;
static const uint8_t RX = 44;
variants/esp32s3/tracksenger/internal/variant.h
-1
View File
@@ -78,7 +78,6 @@
// keyboard changes
#define PIN_BUZZER 43
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define INPUTBROKER_MATRIX_TYPE 1
variants/esp32s3/tracksenger/lcd/pins_arduino.h
-4
View File
@@ -11,10 +11,6 @@
#define USB_VID 0x303a
#define USB_PID 0x1001
static const uint8_t LED_BUILTIN = 18;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN
static const uint8_t TX = 43;
static const uint8_t RX = 44;
variants/esp32s3/tracksenger/lcd/variant.h
-1
View File
@@ -102,7 +102,6 @@
// keyboard changes
#define PIN_BUZZER 43
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define INPUTBROKER_MATRIX_TYPE 1
variants/esp32s3/tracksenger/oled/pins_arduino.h
-4
View File
@@ -11,10 +11,6 @@
#define USB_VID 0x303a
#define USB_PID 0x1001
static const uint8_t LED_BUILTIN = 18;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN
static const uint8_t TX = 43;
static const uint8_t RX = 44;
variants/esp32s3/tracksenger/oled/variant.h
-1
View File
@@ -79,7 +79,6 @@
// keyboard changes
#define PIN_BUZZER 43
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define INPUTBROKER_MATRIX_TYPE 1
variants/esp32s3/tracksenger/platformio.ini
+2 -2
View File
@@ -22,7 +22,7 @@ build_flags =
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.7
lovyan03/LovyanGFX@1.2.19
[env:tracksenger-lcd]
custom_meshtastic_hw_model = 48
@@ -48,7 +48,7 @@ build_flags =
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.7
lovyan03/LovyanGFX@1.2.19
[env:tracksenger-oled]
custom_meshtastic_hw_model = 48
variants/esp32s3/unphone/pins_arduino.h
-3
View File
@@ -6,9 +6,6 @@
#define USB_VID 0x16D0
#define USB_PID 0x1178
#define LED_BUILTIN 13
#define BUILTIN_LED LED_BUILTIN // backward compatibility
static const uint8_t TX = 43;
static const uint8_t RX = 44;
variants/esp32s3/unphone/platformio.ini
+1 -1
View File
@@ -37,7 +37,7 @@ build_src_filter =
lib_deps = ${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.0
lovyan03/LovyanGFX@1.2.19
# TODO renovate
https://gitlab.com/hamishcunningham/unphonelibrary#meshtastic@9.0.0
# renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
variants/native/portduino-buildroot/variant.h
-1
View File
@@ -1,6 +1,5 @@
#define HAS_SCREEN 1
#define USE_TFTDISPLAY 1
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define HAS_GPS 1
#define MAX_RX_TOPHONE portduino_config.maxtophone
#define MAX_NUM_NODES portduino_config.MaxNodes
variants/native/portduino.ini
+2 -2
View File
@@ -27,9 +27,9 @@ lib_deps =
# renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
rweather/Crypto@0.4.0
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.7
lovyan03/LovyanGFX@1.2.19
# renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
https://github.com/pine64/libch341-spi-userspace/archive/23c42319a69cffcb65868e3c72e6bed83974a393.zip
# renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
adafruit/Adafruit seesaw Library@1.7.9
# renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
variants/native/portduino/variant.h
-1
View File
@@ -2,7 +2,6 @@
#define HAS_SCREEN 1
#endif
#define USE_TFTDISPLAY 1
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define HAS_GPS 1
#define MAX_RX_TOPHONE portduino_config.maxtophone
#define MAX_NUM_NODES portduino_config.MaxNodes

Some files were not shown because too many files have changed in this diff Show More