ElixirForge/firmware
1
0
Fork 0
mirror of https://github.com/alexhopeoconnor/firmware.git synced 2026-10-17 17:11:30 +10:00
Code Releases Activity

Simplify SX126x variant configuration (#2813)

Browse Source 
* Update SX126xInterface.cpp

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update SX126xInterface.cpp

* Update SX126xInterface.cpp

* Update variant.h

* Update variant.h

* trunk fmt

* trunk fmt

* Update variant.h

* trunk fmt

* trunk fmt

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update pins_arduino.h

* Update pins_arduino.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* trunk fmt

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* trunk fmt

* trunk fmt

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

Specify behavior

* Update variant.h

Maintain behavior

* trunk fmt

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

* Update variant.h

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
This commit is contained in:
S5NC
2023-09-27 16:01:40 -05:00
committed by GitHub
co-authored by Ben Meadors
parent 98290e5d7b
commit 4e3576ae48
50 changed files with 311 additions and 251 deletions
Download Patch File Download Diff File Expand all files Collapse all files
variants/Dongle_nRF52840-pca10059-v1/variant.h
+7 -6
View File
@@ -47,12 +47,12 @@ extern "C" {
#define PIN_LED2 (0 + 6) // Built in Green P0.06
// Green Built in LED1
//#define PIN_LED1 (0 + 6) // LED1 P1.15
// #define PIN_LED1 (0 + 6) // LED1 P1.15
// RGB NeoPixel LED2
//#define PIN_LED1 (0 + 8) Red
//#define PIN_LED1 (32 + 9) Green
//#define PIN_LED1 (0 + 12) Blue
// #define PIN_LED1 (0 + 8) Red
// #define PIN_LED1 (32 + 9) Green
// #define PIN_LED1 (0 + 12) Blue
#define LED_BUILTIN PIN_LED1
#define LED_CONN PIN_LED2
@@ -113,7 +113,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
* eink display pins
*/
//#define PIN_EINK_EN (-1)
// #define PIN_EINK_EN (-1)
#define PIN_EINK_EN (0 + 6) // Turn on the Green built in LED
#define PIN_EINK_CS (32) // EPD_CS
#define PIN_EINK_BUSY (20) // EPD_BUSY
@@ -140,7 +140,8 @@ static const uint8_t SCK = PIN_SPI_SCK;
#define SX126X_RESET (32 + 15) // LORA_RESET P1.15
#define SX126X_TXEN (32 + 13) // TXEN P1.13 NiceRF 868 dont use
#define SX126X_RXEN (32 + 10) // RXEN P1.10 NiceRF 868 dont use
#define SX126X_E22
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define PIN_GPS_EN (-1)
#define PIN_GPS_PPS (-1) // Pulse per second input from the GPS
variants/MakePython_nRF52840_eink/variant.h
+4 -4
View File
@@ -73,7 +73,7 @@ static const uint8_t AREF = PIN_AREF;
*/
#define SPI_INTERFACES_COUNT 2
// here
//#define SPI_INTERFACES_COUNT 1
// #define SPI_INTERFACES_COUNT 1
#define PIN_SPI_MISO (0 + 31) // MISO P0.31
#define PIN_SPI_MOSI (0 + 30) // MOSI P0.30
@@ -94,7 +94,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
* eink display pins
*/
//#define PIN_EINK_EN (-1)
// #define PIN_EINK_EN (-1)
#define PIN_EINK_CS (0 + 3) // EPD_CS
#define PIN_EINK_BUSY (32 + 11) // EPD_BUSY
#define PIN_EINK_DC (32 + 13) // EPD_D/C
@@ -118,8 +118,8 @@ static const uint8_t SCK = PIN_SPI_SCK;
#define SX128X_CS (0 + 23)
#define SX128X_DIO1 (0 + 4)
#define SX128X_BUSY (0 + 7)
//#define SX128X_TXEN (32 + 9)
//#define SX128X_RXEN (0 + 12)
// #define SX128X_TXEN (32 + 9)
// #define SX128X_RXEN (0 + 12)
#define SX128X_RESET LORA_RESET
#define PIN_GPS_EN (-1)
variants/MakePython_nRF52840_oled/variant.h
+2 -2
View File
@@ -96,8 +96,8 @@ static const uint8_t SCK = PIN_SPI_SCK;
#define SX128X_CS (0 + 23)
#define SX128X_DIO1 (0 + 4)
#define SX128X_BUSY (0 + 7)
//#define SX128X_TXEN (32 + 9)
//#define SX128X_RXEN (0 + 12)
// #define SX128X_TXEN (32 + 9)
// #define SX128X_RXEN (0 + 12)
#define SX128X_RESET LORA_RESET
#define PIN_GPS_EN (-1)
variants/ai-c3/variant.h
+3 -1
View File
@@ -23,7 +23,9 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY 10
#define SX126X_RESET LORA_RESET
#define SX126X_E22 // use DIO2 as RF switch
#define SX126X_DIO2_AS_RF_SWITCH // use DIO2 as RF switch
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define HAS_GPS 0
#undef GPS_RX_PIN
variants/bpi_picow_esp32_s3/pins_arduino.h
+6 -6
View File
@@ -27,11 +27,11 @@ static const uint8_t SCK = 21;
static const uint8_t MOSI = 38;
static const uint8_t SS = 17;
//#define SPI_MOSI (11)
//#define SPI_SCK (14)
//#define SPI_MISO (2)
//#define SPI_CS (13)
// #define SPI_MOSI (11)
// #define SPI_SCK (14)
// #define SPI_MISO (2)
// #define SPI_CS (13)
//#define SDCARD_CS SPI_CS
// #define SDCARD_CS SPI_CS
#endif /* Pins_Arduino_h */
#endif /* Pins_Arduino_h */
variants/bpi_picow_esp32_s3/variant.h
+17 -16
View File
@@ -2,10 +2,10 @@
#undef GPS_RX_PIN
#undef GPS_TX_PIN
//#define HAS_SCREEN 0
// #define HAS_SCREEN 0
//#define HAS_SDCARD
//#define SDCARD_USE_SPI1
// #define HAS_SDCARD
// #define SDCARD_USE_SPI1
#define USE_SSD1306
#define I2C_SDA 12
@@ -14,13 +14,13 @@
#define LED_PIN 46
#define LED_STATE_ON 0 // State when LED is litted
//#define BUTTON_PIN 15 // Pico OLED 1.3 User key 0 - removed User key 1 (17)
// #define BUTTON_PIN 15 // Pico OLED 1.3 User key 0 - removed User key 1 (17)
#define BUTTON_PIN 40
//#define BUTTON_PIN 0 // This is the BOOT button pad at the moment
//#define BUTTON_NEED_PULLUP
// #define BUTTON_PIN 0 // This is the BOOT button pad at the moment
// #define BUTTON_NEED_PULLUP
//#define USE_RF95 // RFM95/SX127x
// #define USE_RF95 // RFM95/SX127x
#undef RF95_SCK
#undef RF95_MISO
@@ -43,10 +43,11 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_BUSY
#define SX126X_RESET LORA_RESET
#define SX126X_E22
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#endif
//#define USE_SX1280
// #define USE_SX1280
#ifdef USE_SX1280
#define RF95_MISO 1
#define RF95_SCK 3
@@ -61,13 +62,13 @@
#define SX128X_RESET LORA_RESET
#endif
//#define USE_EINK
// #define USE_EINK
/*
* eink display pins
*/
//#define PIN_EINK_CS
//#define PIN_EINK_BUSY
//#define PIN_EINK_DC
//#define PIN_EINK_RES (-1)
//#define PIN_EINK_SCLK 3
//#define PIN_EINK_MOSI 4
// #define PIN_EINK_CS
// #define PIN_EINK_BUSY
// #define PIN_EINK_DC
// #define PIN_EINK_RES (-1)
// #define PIN_EINK_SCLK 3
// #define PIN_EINK_MOSI 4
variants/diy/dr-dev/variant.h
+14 -10
View File
@@ -31,10 +31,13 @@
// PINS FOR THE 900M22S
#define LORA_DIO1 26 // IRQ for SX1262/SX1268
#define LORA_DIO2 22 // BUSY for SX1262/SX1268
#define LORA_TXEN NOT_A_PIN // Input - RF switch TX control, connecting external MCU IO or DIO2, valid in high level
#define LORA_RXEN 17 // Input - RF switch RX control, connecting external MCU IO, valid in high level
#define LORA_DIO1 26 // IRQ for SX1262/SX1268
#define LORA_DIO2 22 // BUSY for SX1262/SX1268
// NOT_A_PIN is treated as RADIOLIB_NC due to how they are defined, best to use RADIOLIB_NC directly
#define LORA_TXEN RADIOLIB_NC // Input - RF switch TX control, connecting external MCU IO or DIO2, valid in high level
// E22_TXEN_CONNECTED_TO_DIO2 wasn't defined, so RXEN wasn't controlled. Commented it out to maintain behavior, but shouldn't be.
// Need to comment out defining SX126X_RXEN as LORA_RXEN too
// #define LORA_RXEN 17 // Input - RF switch RX control, connecting external MCU IO, valid in high level
#undef RF95_NSS
#define RF95_NSS 16
#define SX126X_BUSY 22
@@ -53,7 +56,7 @@
*/
// RX/TX for RFM95/SX127x
#define RF95_RXEN LORA_RXEN
// #define RF95_RXEN LORA_RXEN
#define RF95_TXEN LORA_TXEN
// #define RF95_TCXO <GPIO#>
@@ -61,12 +64,13 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_RESET LORA_RESET
#define SX126X_RXEN LORA_RXEN
// #define SX126X_RXEN LORA_RXEN
#define SX126X_TXEN LORA_TXEN
// supported modules list
//#define USE_RF95 // RFM95/SX127x
// #define USE_RF95 // RFM95/SX127x
#define USE_SX1262
//#define USE_SX1268
//#define USE_LLCC68
#define SX126X_E22
// #define USE_SX1268
// #define USE_LLCC68
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
variants/diy/hydra/variant.h
+3 -2
View File
@@ -37,8 +37,9 @@
#define SX126X_RESET LORA_RESET
#define SX126X_RXEN 14
#define SX126X_TXEN RADIOLIB_NC
#define E22_TXEN_CONNECTED_TO_DIO2 1
#define SX126X_DIO2_AS_RF_SWITCH
// Set lora.tx_power to 13 for Hydra or other E22 900M30S target due to PA
#define SX126X_MAX_POWER 13
#define SX126X_E22
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
variants/diy/v1/variant.h
+2 -2
View File
@@ -52,5 +52,5 @@
#ifdef EBYTE_E22
// Internally the TTGO module hooks the SX126x-DIO2 in to control the TX/RX switch
// (which is the default for the sx1262interface code)
#define SX126X_E22
#endif
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#endif
variants/diy/v1_1/variant.h
+1 -1
View File
@@ -53,5 +53,5 @@
#ifdef EBYTE_E22
// Internally the TTGO module hooks the SX126x-DIO2 in to control the TX/RX switch
// (which is the default for the sx1262interface code)
#define SX126X_E22
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#endif
variants/feather_diy/variant.h
+1 -1
View File
@@ -105,7 +105,7 @@ extern "C" {
#ifdef EBYTE_E22
// Internally the TTGO module hooks the SX126x-DIO2 in to control the TX/RX switch
// (which is the default for the sx1262interface code)
#define SX126X_E22
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#endif
#ifdef __cplusplus
variants/heltec_esp32c3/variant.h
+2 -1
View File
@@ -33,4 +33,5 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_BUSY
#define SX126X_RESET LORA_RESET
#define SX126X_E22
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
variants/heltec_v3/variant.h
+3 -1
View File
@@ -33,4 +33,6 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_E22
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
variants/heltec_wireless_paper/variant.h
+3 -1
View File
@@ -40,4 +40,6 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_E22
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
variants/heltec_wireless_tracker/variant.h
+3 -1
View File
@@ -59,4 +59,6 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_E22
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
variants/heltec_wsl_v3/variant.h
+3 -1
View File
@@ -32,4 +32,6 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_E22
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
variants/lora_isp4520/variant.h
+3 -2
View File
@@ -28,7 +28,7 @@
#define USE_LFXO
//#define USE_SEGGER
// #define USE_SEGGER
// Number of pins defined in PinDescription array
#define PINS_COUNT (16)
@@ -88,6 +88,7 @@
#define BATTERY_PIN 3
#define ADC_MULTIPLIER 1.436
#define SX126X_E22 // Not really an E22 but this board clones using DIO3 for tcxo control
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8 // Not really an E22 but this board clones using DIO3 for tcxo control
#endif
variants/lora_relay_v1/variant.h
+2 -1
View File
@@ -134,7 +134,8 @@ static const uint8_t SCK = PIN_SPI_SCK;
#define SX126X_TXEN (31)
#define SX126X_POWER_EN \
(15) // FIXME, see warning hre https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay/blob/master/LORA_RELAY_NRF52840.ino
#define SX126X_E22 // Indicates this SX1262 is inside of an ebyte E22 module and special config should be done for that
// Indicates this SX1262 is inside of an ebyte E22 module and special config should be done for that
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define ST7735_RESET (11) // Output
#define ST7735_CS (12)
variants/lora_relay_v2/variant.h
+2 -1
View File
@@ -154,7 +154,8 @@ static const uint8_t SCK = PIN_SPI_SCK;
#define SX126X_TXEN (31)
#define SX126X_POWER_EN \
(15) // FIXME, see warning hre https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay/blob/master/LORA_RELAY_NRF52840.ino
#define SX126X_E22 // Indicates this SX1262 is inside of an ebyte E22 module and special config should be done for that
// Indicates this SX1262 is inside of an ebyte E22 module and special config should be done for that
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// ST7565 SPI
#define ST7735_RESET (11) // Output
variants/m5stack-stamp-c3/variant.h
+40 -39
View File
@@ -4,7 +4,7 @@
#define BUTTON_PIN 3 // M5Stack STAMP C3 built in button
#define BUTTON_NEED_PULLUP
//#define HAS_SCREEN 0
// #define HAS_SCREEN 0
#define HAS_GPS 0
#undef GPS_RX_PIN
#undef GPS_TX_PIN
@@ -28,45 +28,46 @@
// WaveShare Core1262-868M OK
// https://www.waveshare.com/wiki/Core1262-868M
//#define USE_SX1262
//#define RF95_SCK 4
//#define RF95_MISO 5
//#define RF95_MOSI 6
//#define RF95_NSS 7
//#define LORA_DIO0 RADIOLIB_NC
//#define LORA_RESET 8
//#define LORA_DIO1 10
//#define LORA_DIO2 RADIOLIB_NC
//#define LORA_BUSY 18
//#define SX126X_CS RF95_NSS
//#define SX126X_DIO1 LORA_DIO1
//#define SX126X_BUSY LORA_BUSY
//#define SX126X_RESET LORA_RESET
//#define SX126X_E22
// #define USE_SX1262
// #define RF95_SCK 4
// #define RF95_MISO 5
// #define RF95_MOSI 6
// #define RF95_NSS 7
// #define LORA_DIO0 RADIOLIB_NC
// #define LORA_RESET 8
// #define LORA_DIO1 10
// #define LORA_DIO2 RADIOLIB_NC
// #define LORA_BUSY 18
// #define SX126X_CS RF95_NSS
// #define SX126X_DIO1 LORA_DIO1
// #define SX126X_BUSY LORA_BUSY
// #define SX126X_RESET LORA_RESET
// #define SX126X_DIO2_AS_RF_SWITCH
// #define SX126X_DIO3_TCXO_VOLTAGE 1.8
// SX128X 2.4 Ghz LoRa module Not OK - RadioLib issue ? still to confirm
//#define USE_SX1280
//#define RF95_SCK 4
//#define RF95_MISO 5
//#define RF95_MOSI 6
//#define RF95_NSS 7
//#define LORA_DIO0 -1
//#define LORA_DIO1 10
//#define LORA_DIO2 21
//#define LORA_RESET 8
//#define LORA_BUSY 1
//#define SX128X_CS RF95_NSS
//#define SX128X_DIO1 LORA_DIO1
//#define SX128X_BUSY LORA_BUSY
//#define SX128X_RESET LORA_RESET
//#define SX128X_MAX_POWER 10
// #define USE_SX1280
// #define RF95_SCK 4
// #define RF95_MISO 5
// #define RF95_MOSI 6
// #define RF95_NSS 7
// #define LORA_DIO0 -1
// #define LORA_DIO1 10
// #define LORA_DIO2 21
// #define LORA_RESET 8
// #define LORA_BUSY 1
// #define SX128X_CS RF95_NSS
// #define SX128X_DIO1 LORA_DIO1
// #define SX128X_BUSY LORA_BUSY
// #define SX128X_RESET LORA_RESET
// #define SX128X_MAX_POWER 10
// Not yet tested
//#define USE_EINK
//#define PIN_EINK_EN -1 // N/C
//#define PIN_EINK_CS 9 // EPD_CS
//#define PIN_EINK_BUSY 18 // EPD_BUSY
//#define PIN_EINK_DC 19 // EPD_D/C
//#define PIN_EINK_RES -1 // Connected but not needed
//#define PIN_EINK_SCLK 4 // EPD_SCLK
//#define PIN_EINK_MOSI 6 // EPD_MOSI
// #define USE_EINK
// #define PIN_EINK_EN -1 // N/C
// #define PIN_EINK_CS 9 // EPD_CS
// #define PIN_EINK_BUSY 18 // EPD_BUSY
// #define PIN_EINK_DC 19 // EPD_D/C
// #define PIN_EINK_RES -1 // Connected but not needed
// #define PIN_EINK_SCLK 4 // EPD_SCLK
// #define PIN_EINK_MOSI 6 // EPD_MOSI
variants/m5stack_core/variant.h
+1 -1
View File
@@ -4,7 +4,7 @@
#define I2C_SCL 22
// #define BUTTON_PIN 39 // 38, 37
//#define BUTTON_PIN 0
// #define BUTTON_PIN 0
#define BUTTON_NEED_PULLUP
// #define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Plugin.
variants/m5stack_coreink/variant.h
+3 -3
View File
@@ -3,8 +3,8 @@
#define I2C_SCL 22
// 7-07-2023 Or enable Secondary I2C Bus
//#define I2C_SDA1 32
//#define I2C_SCL1 33
// #define I2C_SDA1 32
// #define I2C_SCL1 33
#define HAS_GPS 1
#undef GPS_RX_PIN
@@ -39,7 +39,7 @@
#undef RF95_MOSI
#undef RF95_NSS
#define USE_RF95
//#define USE_SX1280
// #define USE_SX1280
#ifdef USE_RF95
#define RF95_SCK 18
variants/monteops_hw1/variant.h
+6 -4
View File
@@ -64,7 +64,7 @@ extern "C" {
* Buttons
*/
//#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
// #define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
#define BUTTON_NEED_PULLUP
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
@@ -191,7 +191,9 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
// #define SX126X_TXEN (39)
// #define SX126X_RXEN (37)
#define SX126X_POWER_EN (37)
#define SX126X_E22 // DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
#define SX126X_DIO2_AS_RF_SWITCH // DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define PIN_GPS_RESET (34) // Must be P1.02
// #define PIN_GPS_EN
@@ -220,7 +222,7 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
#define ADC_MULTIPLIER VBAT_DIVIDER_COMP // REAL_VBAT_MV_PER_LSB
#define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x)
//#define HAS_RTC 1
// #define HAS_RTC 1
#define HAS_ETHERNET 1
@@ -237,4 +239,4 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#endif
#endif
variants/my_esp32s3_diy_eink/pins_arduino.h
+5 -5
View File
@@ -24,11 +24,11 @@ static const uint8_t SCK = 5;
static const uint8_t MOSI = 6;
static const uint8_t SS = 7;
//#define SPI_MOSI (11)
//#define SPI_SCK (14)
//#define SPI_MISO (2)
//#define SPI_CS (13)
// #define SPI_MOSI (11)
// #define SPI_SCK (14)
// #define SPI_MISO (2)
// #define SPI_CS (13)
//#define SDCARD_CS SPI_CS
// #define SDCARD_CS SPI_CS
#endif /* Pins_Arduino_h */
variants/my_esp32s3_diy_eink/variant.h
+7 -7
View File
@@ -2,22 +2,22 @@
#undef GPS_RX_PIN
#undef GPS_TX_PIN
//#define HAS_SCREEN 0
//#define HAS_SDCARD
//#define SDCARD_USE_SPI1
// #define HAS_SCREEN 0
// #define HAS_SDCARD
// #define SDCARD_USE_SPI1
//#define USE_SSD1306
// #define USE_SSD1306
#define I2C_SDA 18 // 1 // I2C pins for this board
#define I2C_SCL 17 // 2
//#define LED_PIN 38 // This is a RGB LED not a standard LED
// #define LED_PIN 38 // This is a RGB LED not a standard LED
#define BUTTON_PIN 0 // This is the BOOT button
#define BUTTON_NEED_PULLUP
//#define USE_RF95 // RFM95/SX127x
//#define USE_SX1262
// #define USE_RF95 // RFM95/SX127x
// #define USE_SX1262
#define USE_SX1280
#define RF95_MISO 3
variants/my_esp32s3_diy_oled/pins_arduino.h
+5 -5
View File
@@ -24,11 +24,11 @@ static const uint8_t SCK = 5;
static const uint8_t MOSI = 6;
static const uint8_t SS = 7;
//#define SPI_MOSI (11)
//#define SPI_SCK (14)
//#define SPI_MISO (2)
//#define SPI_CS (13)
// #define SPI_MOSI (11)
// #define SPI_SCK (14)
// #define SPI_MISO (2)
// #define SPI_CS (13)
//#define SDCARD_CS SPI_CS
// #define SDCARD_CS SPI_CS
#endif /* Pins_Arduino_h */
variants/my_esp32s3_diy_oled/variant.h
+13 -13
View File
@@ -2,22 +2,22 @@
#undef GPS_RX_PIN
#undef GPS_TX_PIN
//#define HAS_SCREEN 0
//#define HAS_SDCARD
//#define SDCARD_USE_SPI1
// #define HAS_SCREEN 0
// #define HAS_SDCARD
// #define SDCARD_USE_SPI1
#define USE_SSD1306
#define I2C_SDA 18 // 1 // I2C pins for this board
#define I2C_SCL 17 // 2
//#define LED_PIN 38 // This is a RGB LED not a standard LED
// #define LED_PIN 38 // This is a RGB LED not a standard LED
#define BUTTON_PIN 0 // This is the BOOT button
#define BUTTON_NEED_PULLUP
//#define USE_RF95 // RFM95/SX127x
//#define USE_SX1262
// #define USE_RF95 // RFM95/SX127x
// #define USE_SX1262
#define USE_SX1280
#define RF95_MISO 3
@@ -44,13 +44,13 @@
#define SX128X_RESET LORA_RESET
#endif
//#define USE_EINK
// #define USE_EINK
/*
* eink display pins
*/
//#define PIN_EINK_CS 13
//#define PIN_EINK_BUSY 2
//#define PIN_EINK_DC 1
//#define PIN_EINK_RES (-1)
//#define PIN_EINK_SCLK 5
//#define PIN_EINK_MOSI 6
// #define PIN_EINK_CS 13
// #define PIN_EINK_BUSY 2
// #define PIN_EINK_DC 1
// #define PIN_EINK_RES (-1)
// #define PIN_EINK_SCLK 5
// #define PIN_EINK_MOSI 6
variants/nano-g1-explorer/variant.h
+4 -2
View File
@@ -27,7 +27,9 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_E22 // Not really an E22
// Not really an E22
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// Internally the module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
// code)
#endif
@@ -37,4 +39,4 @@
#define BATTERY_SENSE_SAMPLES 15 // Set the number of samples, It has an effect of increasing sensitivity.
#define ADC_MULTIPLIER 2
#define USE_SH1107_128_64
#define USE_SH1107_128_64
variants/nano-g1/variant.h
+3 -1
View File
@@ -27,7 +27,9 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_E22 // Not really an E22
// Not really an E22
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// Internally the module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
// code)
#endif
variants/nano-g2-ultra/variant.h
+4 -2
View File
@@ -118,7 +118,9 @@ External serial flash W25Q16JV_IQ
// This is used as an *output* from the sx1262 and connected internally to power the tcxo, do not drive from the main CPU?
#define SX126X_BUSY (32 + 11)
#define SX126X_RESET (32 + 15)
#define SX126X_E22 // DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// #define LORA_DISABLE_SENDING // Define this to disable transmission for testing (power testing etc...)
@@ -193,4 +195,4 @@ External serial flash W25Q16JV_IQ
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#endif
#endif
variants/pca10056-rc-clock/variant.h
+1
View File
@@ -146,6 +146,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
#define SX126X_BUSY (32 + 4) // P1.04
#define SX126X_RESET (0 + 3) // P0.03
#define SX126X_ANT_SW (32 + 10) // P1.10
#define SX126X_DIO2_AS_RF_SWITCH
// To debug via the segger JLINK console rather than the CDC-ACM serial device
// #define USE_SEGGER
variants/portduino/variant.h
+1
View File
@@ -20,5 +20,6 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_DIO2_AS_RF_SWITCH
// HOPE RFM90 does not have a TCXO therefore not SX126X_E22
#endif
variants/ppr/variant.h
+6 -5
View File
@@ -89,8 +89,8 @@ static const uint8_t A7 = PIN_A7;
// Other pins
#define PIN_AREF (0xff)
//#define PIN_NFC1 (9)
//#define PIN_NFC2 (10)
// #define PIN_NFC1 (9)
// #define PIN_NFC2 (10)
static const uint8_t AREF = PIN_AREF;
@@ -103,8 +103,8 @@ static const uint8_t AREF = PIN_AREF;
#define PIN_SERIAL1_TX (9)
// Connected to Jlink CDC
//#define PIN_SERIAL2_RX (8)
//#define PIN_SERIAL2_TX (6)
// #define PIN_SERIAL2_RX (8)
// #define PIN_SERIAL2_TX (6)
/*
* SPI Interfaces
@@ -138,7 +138,8 @@ static const uint8_t SCK = PIN_SPI_SCK;
// #define SX126X_ANT_SW (32 + 10)
#define SX126X_RXEN (22)
#define SX126X_TXEN (24)
#define SX126X_E22 // Indicates this SX1262 is inside of an ebyte E22 module and special config should be done for that
// Indicates this SX1262 is inside of an ebyte E22 module and special config should be done for that
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// ERC12864-10 LCD
#define ERC12864_CS (32 + 4)
variants/ppr1/variant.h
+4 -3
View File
@@ -89,8 +89,8 @@ static const uint8_t A7 = PIN_A7;
// Other pins
#define PIN_AREF (0xff)
//#define PIN_NFC1 (9)
//#define PIN_NFC2 (10)
// #define PIN_NFC1 (9)
// #define PIN_NFC2 (10)
static const uint8_t AREF = PIN_AREF;
@@ -158,7 +158,8 @@ static const uint8_t SCK = PIN_SPI_SCK;
#define SX126X_RESET (0 + 17)
#define SX126X_TXEN (0 + 24)
#define SX126X_RXEN (0 + 22)
#define SX126X_E22 // Not really an E22 but this board clones using DIO3 for tcxo control
// Not really an E22 but this board clones using DIO3 for tcxo control
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// FIXME, to prevent burning out parts I've set the power level super low, because I don't have
// an antenna wired up
variants/rak11200/variant.h
+3 -1
View File
@@ -81,4 +81,6 @@ static const uint8_t SCK = 33;
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_POWER_EN WB_IO3
#define SX126X_E22 // DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
variants/rak11310/variant.h
+4 -2
View File
@@ -48,5 +48,7 @@
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_POWER_EN 25
#define SX126X_E22 // DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
#endif
// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#endif
variants/rak4631/variant.h
+4 -2
View File
@@ -209,7 +209,9 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
// #define SX126X_TXEN (39)
// #define SX126X_RXEN (37)
#define SX126X_POWER_EN (37)
#define SX126X_E22 // DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// enables 3.3V periphery like GPS or IO Module
#define PIN_3V3_EN (34)
@@ -275,4 +277,4 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#endif
#endif
variants/rak4631_epaper/variant.h
+4 -2
View File
@@ -186,7 +186,9 @@ static const uint8_t SCK = PIN_SPI_SCK;
// #define SX126X_TXEN (39)
// #define SX126X_RXEN (37)
#define SX126X_POWER_EN (37)
#define SX126X_E22 // DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// enables 3.3V periphery like GPS or IO Module
#define PIN_3V3_EN (34)
@@ -239,4 +241,4 @@ static const uint8_t SCK = PIN_SPI_SCK;
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#endif
#endif
variants/rak4631_epaper_onrxtx/variant.h
+25 -23
View File
@@ -43,7 +43,7 @@ extern "C" {
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
#define BUTTON_NEED_PULLUP
//#define PIN_BUTTON2 12
// #define PIN_BUTTON2 12
/*
* Analog pins
@@ -69,8 +69,8 @@ static const uint8_t A7 = PIN_A7;
// Other pins
#define PIN_AREF (2)
//#define PIN_NFC1 (9)
//#define PIN_NFC2 (10)
// #define PIN_NFC1 (9)
// #define PIN_NFC2 (10)
static const uint8_t AREF = PIN_AREF;
@@ -111,7 +111,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
#define PIN_EINK_CS (0 + 16) // TX1
#define PIN_EINK_BUSY (0 + 15) // RX1
#define PIN_EINK_DC (0 + 17) // IO1
//#define PIN_EINK_RES (-1) //first try without RESET then connect it to AIN (AIN0 5 )
// #define PIN_EINK_RES (-1) //first try without RESET then connect it to AIN (AIN0 5 )
#define PIN_EINK_RES (0 + 5) // 2.13 BN Display needs RESET
#define PIN_EINK_SCLK (0 + 14) // SCL
#define PIN_EINK_MOSI (0 + 13) // SDA
@@ -155,7 +155,9 @@ static const uint8_t SCK = PIN_SPI_SCK;
// #define SX126X_TXEN (39)
// #define SX126X_RXEN (37)
#define SX126X_POWER_EN (37)
#define SX126X_E22 // DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// enables 3.3V periphery like GPS or IO Module
#define PIN_3V3_EN (34)
@@ -171,36 +173,36 @@ static const uint8_t SCK = PIN_SPI_SCK;
// Therefore must be 1 to keep peripherals powered
// Power is on the controllable 3V3_S rail
// #define PIN_GPS_RESET (34)
//#define PIN_GPS_EN PIN_3V3_EN
//#define PIN_GPS_PPS (17) // Pulse per second input from the GPS
// #define PIN_GPS_EN PIN_3V3_EN
// #define PIN_GPS_PPS (17) // Pulse per second input from the GPS
//#define GPS_RX_PIN PIN_SERIAL1_RX
//#define GPS_TX_PIN PIN_SERIAL1_TX
// #define GPS_RX_PIN PIN_SERIAL1_RX
// #define GPS_TX_PIN PIN_SERIAL1_TX
// RAK12002 RTC Module
#define RV3028_RTC (uint8_t)0b1010010
// Battery
// The battery sense is hooked to pin A0 (5)
//#define BATTERY_PIN PIN_A0
// #define BATTERY_PIN PIN_A0
// and has 12 bit resolution
//#define BATTERY_SENSE_RESOLUTION_BITS 12
//#define BATTERY_SENSE_RESOLUTION 4096.0
// #define BATTERY_SENSE_RESOLUTION_BITS 12
// #define BATTERY_SENSE_RESOLUTION 4096.0
// Definition of milliVolt per LSB => 3.0V ADC range and 12-bit ADC resolution = 3000mV/4096
//#define VBAT_MV_PER_LSB (0.73242188F)
// #define VBAT_MV_PER_LSB (0.73242188F)
// Voltage divider value => 1.5M + 1M voltage divider on VBAT = (1.5M / (1M + 1.5M))
//#define VBAT_DIVIDER (0.4F)
// #define VBAT_DIVIDER (0.4F)
// Compensation factor for the VBAT divider
//#define VBAT_DIVIDER_COMP (1.73)
// #define VBAT_DIVIDER_COMP (1.73)
// Fixed calculation of milliVolt from compensation value
//#define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
//#undef AREF_VOLTAGE
//#define AREF_VOLTAGE 3.0
//#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
//#define ADC_MULTIPLIER VBAT_DIVIDER_COMP // REAL_VBAT_MV_PER_LSB
//#define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x)
// #define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
// #undef AREF_VOLTAGE
// #define AREF_VOLTAGE 3.0
// #define VBAT_AR_INTERNAL AR_INTERNAL_3_0
// #define ADC_MULTIPLIER VBAT_DIVIDER_COMP // REAL_VBAT_MV_PER_LSB
// #define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x)
//#define HAS_RTC 1
// #define HAS_RTC 1
#ifdef __cplusplus
}
@@ -210,4 +212,4 @@ static const uint8_t SCK = PIN_SPI_SCK;
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#endif
#endif
variants/rpipico/variant.h
+3 -2
View File
@@ -53,5 +53,6 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_E22
#endif
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#endif
variants/rpipicow/variant.h
+3 -2
View File
@@ -51,5 +51,6 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_E22
#endif
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#endif
variants/station-g1/variant.h
+2 -4
View File
@@ -27,9 +27,7 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
// #define SX126X_E22 // Not really an E22
// Internally the module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
// code)
#define SX126X_DIO2_AS_RF_SWITCH // Internally the module hooks the SX1262-DIO2 in to control the TX/RX switch
#define SX126X_MAX_POWER \
16 // Ensure the PA does not exceed the saturation output power. More
// Info:https://uniteng.com/wiki/doku.php?id=meshtastic:station#rf_design_-_lora_station_edition_g1
@@ -49,4 +47,4 @@
// Station may not have GPS installed, but it has a labeled GPS pinout
#define GPS_RX_PIN 34
#define GPS_TX_PIN 12
#define GPS_TX_PIN 12
variants/t-deck/variant.h
+4 -2
View File
@@ -84,6 +84,8 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_E22 // Not really an E22 but TTGO seems to be trying to clone that
// Not really an E22 but TTGO seems to be trying to clone that
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
// code)
// code)
variants/t-echo/variant.h
+3 -1
View File
@@ -133,7 +133,9 @@ External serial flash WP25R1635FZUIL0
// CPU?
#define SX126X_BUSY (0 + 17)
#define SX126X_RESET (0 + 25)
#define SX126X_E22 // Not really an E22 but TTGO seems to be trying to clone that
// Not really an E22 but TTGO seems to be trying to clone that
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
// code)
variants/t-watch-s3/variant.h
+5 -3
View File
@@ -63,6 +63,8 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_E22 // Not really an E22 but TTGO seems to be trying to clone that
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for
// the sx1262interface code)
// Not really an E22 but TTGO seems to be trying to clone that
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for
// the sx1262interface code)
variants/tbeam-s3-core/variant.h
+7 -5
View File
@@ -7,9 +7,9 @@
#define I2C_SCL 18 // For QMC6310 sensors and screens
#define BUTTON_PIN 0 // The middle button GPIO on the T-Beam S3
//#define BUTTON_PIN_ALT 13 // Alternate GPIO for an external button if needed. Does anyone use this? It is not documented
// anywhere.
// #define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
// #define BUTTON_PIN_ALT 13 // Alternate GPIO for an external button if needed. Does anyone use this? It is not documented
// anywhere.
// #define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
#define LED_INVERTED 1
@@ -29,7 +29,9 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_E22 // Not really an E22 but TTGO seems to be trying to clone that
// Not really an E22 but TTGO seems to be trying to clone that
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
// code)
#endif
@@ -64,4 +66,4 @@
// has 32768 Hz crystal
#define HAS_32768HZ
#define USE_SH1106
#define USE_SH1106
variants/tbeam/variant.h
+4 -2
View File
@@ -28,7 +28,9 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_E22 // Not really an E22 but TTGO seems to be trying to clone that
// Not really an E22 but TTGO seems to be trying to clone that
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
// code)
#endif
@@ -39,4 +41,4 @@
#define HAS_AXP192
#define GPS_UBLOX
#define GPS_RX_PIN 34
#define GPS_TX_PIN 12
#define GPS_TX_PIN 12
variants/tlora_t3s3_v1/variant.h
+3 -2
View File
@@ -44,7 +44,8 @@
#define SX126X_DIO1 33
#define SX126X_BUSY 34
#define SX126X_RESET LORA_RESET
#define SX126X_E22
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#endif
// per SX128x_Receive_Interrupt/utilities.h
@@ -58,4 +59,4 @@
#define SX128X_RXEN 21
#define SX128X_TXEN 10
#define SX128X_MAX_POWER 3
#endif
#endif
variants/xiao_ble/variant.h
+4 -4
View File
@@ -5,7 +5,7 @@
#define VARIANT_MCK (64000000ul)
#define USE_LFXO // Board uses 32khz crystal for LF
//#define USE_LFRC // Board uses RC for LF
// #define USE_LFRC // Board uses RC for LF
/*----------------------------------------------------------------------------
* Headers
@@ -125,7 +125,6 @@ static const uint8_t SCK = PIN_SPI_SCK;
#define SX126X_TXEN RADIOLIB_NC
#define SX126X_RXEN D7
#define E22_TXEN_CONNECTED_TO_DIO2
// ------------------------------ OR ------------------------------
@@ -141,7 +140,8 @@ static const uint8_t SCK = PIN_SPI_SCK;
#ifdef EBYTE_E22
// Internally the TTGO module hooks the SX126x-DIO2 in to control the TX/RX switch
// (which is the default for the sx1262interface code)
#define SX126X_E22
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#endif
/*
@@ -198,4 +198,4 @@ static const uint8_t SCL = PIN_WIRE_SCL;
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#endif
#endif