ElixirForge/firmware
1
0
Fork 0
mirror of https://github.com/alexhopeoconnor/firmware.git synced 2026-10-21 10:42:35 +10:00
Code Releases Activity

Merge branch 'develop' into thinknode-g3

Browse Source
This commit is contained in:
Jonathan Bennett
2026-05-05 20:53:06 -05:00
committed by GitHub
parent 85b0e8a7cc cdc47a2aea
commit 6fc45e83fc
313 changed files with 29541 additions and 2199 deletions
Download Patch File Download Diff File Expand all files Collapse all files
variants/esp32/m5stack_coreink/platformio.ini
+1 -1
View File
@@ -19,7 +19,7 @@ build_flags =
lib_deps =
${esp32_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
# renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
lewisxhe/SensorLib@0.3.4
lib_ignore =
variants/esp32/tbeam/variant.h
+4 -3
View File
@@ -35,9 +35,10 @@
// code)
#endif
// Leave undefined to disable our PMU IRQ handler. DO NOT ENABLE THIS because the pmuirq can cause sperious interrupts
// and waking from light sleep
// #define PMU_IRQ 35
// Voiding more warranties.
#define PMU_IRQ 35
#define PMU_POWER_BUTTON_IS_CANCEL // maps a short click of the power button to a cancel action (turning off the screen)
#define HAS_AXP192
#define GPS_UBLOX
#define GPS_RX_PIN 34
variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini
+1 -1
View File
@@ -11,7 +11,7 @@ upload_speed = 921600
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
build_unflags =
${esp32s3_base.build_unflags}
-DARDUINO_USB_MODE=1
variants/esp32s3/esp32-s3-pico/platformio.ini
+1 -1
View File
@@ -23,4 +23,4 @@ build_flags = ${esp32s3_base.build_flags}
lib_deps = ${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
variants/esp32s3/heltec_capsule_sensor_v3/variant.h
+1
View File
@@ -1,6 +1,7 @@
#define LED_POWER 33
#define LED_POWER2 34
#define EXT_PWR_DETECT 35
#define EXT_PWR_DETECT_MODE INPUT_PULLUP
#define BUTTON_PIN 18
#define BUTTON_ACTIVE_LOW false
variants/esp32s3/heltec_sensor_hub/variant.h
+1
View File
@@ -1,4 +1,5 @@
#define EXT_PWR_DETECT 20
#define EXT_PWR_DETECT_MODE INPUT_PULLUP
#define BUTTON_PIN 17
#define BUTTON_ACTIVE_LOW false
variants/esp32s3/heltec_v4/platformio.ini
+5 -3
View File
@@ -89,8 +89,10 @@ build_flags =
-D VIEW_240x320
-D DISPLAY_SET_RESOLUTION
-D DISPLAY_SIZE=240x320 ; portrait mode
-D LGFX_SPI_3WIRE=true
-D LGFX_PIN_SCK=17
-D LGFX_PIN_MOSI=33
-D LGFX_PIN_MISO=-1
-D LGFX_PIN_DC=16
-D LGFX_PIN_CS=15
-D LGFX_PIN_BL=21
@@ -120,10 +122,10 @@ build_flags =
-D TFT_OFFSET_Y=0
-D TFT_OFFSET_ROTATION=0
-D SCREEN_ROTATE
-D SCREEN_TRANSITION_FRAMERATE=5
-D SCREEN_TRANSITION_FRAMERATE=30
-D BRIGHTNESS_DEFAULT=130 ; Medium Low Brightness
-D HAS_TOUCHSCREEN=1
-D TOUCH_I2C_PORT=0
-D TOUCH_I2C_PORT=1
-D TOUCH_SLAVE_ADDRESS=0x2E
-D SCREEN_TOUCH_INT=TOUCH_INT_PIN
-D SCREEN_TOUCH_RST=TOUCH_RST_PIN
@@ -133,4 +135,4 @@ lib_deps = ${heltec_v4_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.19
# renovate: datasource=git-refs depName=Quency-D_chsc6x packageName=https://github.com/Quency-D/chsc6x gitBranch=master
https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
variants/esp32s3/heltec_v4_r8/pins_arduino.h
+56
View File
@@ -0,0 +1,56 @@
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include <stdint.h>
#define USB_VID 0x303a
#define USB_PID 0x1001
static const uint8_t TX = 43;
static const uint8_t RX = 44;
static const uint8_t SDA = 17;
static const uint8_t SCL = 18;
static const uint8_t SS = 8;
static const uint8_t MOSI = 10;
static const uint8_t MISO = 11;
static const uint8_t SCK = 9;
static const uint8_t A0 = 1;
static const uint8_t A1 = 2;
static const uint8_t A2 = 3;
static const uint8_t A3 = 4;
static const uint8_t A4 = 5;
static const uint8_t A5 = 6;
static const uint8_t A6 = 7;
static const uint8_t A7 = 8;
static const uint8_t A8 = 9;
static const uint8_t A9 = 10;
static const uint8_t A10 = 11;
static const uint8_t A11 = 12;
static const uint8_t A12 = 13;
static const uint8_t A13 = 14;
static const uint8_t A14 = 15;
static const uint8_t A15 = 16;
static const uint8_t A16 = 17;
static const uint8_t A17 = 18;
static const uint8_t A18 = 19;
static const uint8_t A19 = 20;
static const uint8_t T1 = 1;
static const uint8_t T2 = 2;
static const uint8_t T3 = 3;
static const uint8_t T4 = 4;
static const uint8_t T5 = 5;
static const uint8_t T6 = 6;
static const uint8_t T7 = 7;
static const uint8_t T8 = 8;
static const uint8_t T9 = 9;
static const uint8_t T10 = 10;
static const uint8_t T11 = 11;
static const uint8_t T12 = 12;
static const uint8_t T13 = 13;
static const uint8_t T14 = 14;
#endif /* Pins_Arduino_h */
variants/esp32s3/heltec_v4_r8/platformio.ini
+145
View File
@@ -0,0 +1,145 @@
[heltec_v4_r8_base]
extends = esp32s3_base
board = heltec_v4_r8
board_check = true
board_build.partitions = default_16MB.csv
build_flags =
${esp32s3_base.build_flags}
-D HELTEC_V4_R8
-D HAS_LORA_FEM=1
-D BOARD_HAS_PSRAM
-I variants/esp32s3/heltec_v4_r8
-ULED_BUILTIN
[env:heltec-v4-r8-oled]
custom_meshtastic_hw_model = 132
custom_meshtastic_hw_model_slug = HELTEC_V4_R8
custom_meshtastic_architecture = esp32-s3
custom_meshtastic_actively_supported = true
custom_meshtastic_support_level = 1
custom_meshtastic_display_name = Heltec V4 R8
custom_meshtastic_images = heltec_v4_r8.svg
custom_meshtastic_tags = Heltec
custom_meshtastic_requires_dfu = true
custom_meshtastic_partition_scheme = 16MB
extends = heltec_v4_r8_base
build_flags =
${heltec_v4_r8_base.build_flags}
-D HELTEC_V4_R8_OLED
-D USE_SSD1306 ; Heltec_v4_R8 has an SSD1315 display (compatible with SSD1306 driver)
-D LED_POWER=46
-D RESET_OLED=21
-D I2C_SDA=17
-D I2C_SCL=18
[env:heltec-v4-r8-tft]
custom_meshtastic_hw_model = 132
custom_meshtastic_hw_model_slug = HELTEC_V4_R8
custom_meshtastic_architecture = esp32-s3
custom_meshtastic_actively_supported = true
custom_meshtastic_support_level = 1
custom_meshtastic_display_name = Heltec V4 R8 TFT
custom_meshtastic_images = heltec_v4_r8_tft.svg
custom_meshtastic_tags = Heltec
custom_meshtastic_requires_dfu = true
custom_meshtastic_partition_scheme = 16MB
extends = heltec_v4_r8_base
build_flags =
${heltec_v4_r8_base.build_flags} ;-Os
-D HELTEC_V4_R8_TFT
-D I2C_SDA=17
-D I2C_SCL=18
-D PIN_BUTTON2=46
-D ALT_BUTTON_PIN=PIN_BUTTON2
-D ALT_BUTTON_ACTIVE_LOW=false
-D PIN_BUZZER=4
-D USE_PIN_BUZZER=PIN_BUZZER
-D CONFIG_ARDUHAL_LOG_COLORS
-D RADIOLIB_DEBUG_SPI=0
-D RADIOLIB_DEBUG_PROTOCOL=0
-D RADIOLIB_DEBUG_BASIC=0
-D RADIOLIB_VERBOSE_ASSERT=0
-D RADIOLIB_SPI_PARANOID=0
-D CONFIG_DISABLE_HAL_LOCKS=1
-D INPUTDRIVER_BUTTON_TYPE=0
-D HAS_SCREEN=1
-D HAS_TFT=1
-D RAM_SIZE=5120
-D LV_LVGL_H_INCLUDE_SIMPLE
-D LV_CONF_INCLUDE_SIMPLE
-D LV_COMP_CONF_INCLUDE_SIMPLE
-D LV_USE_SYSMON=0
-D LV_USE_PROFILER=0
-D LV_USE_PERF_MONITOR=0
-D LV_USE_MEM_MONITOR=0
-D LV_USE_LOG=0
-D LV_BUILD_TEST=0
-D USE_LOG_DEBUG
-D LOG_DEBUG_INC=\"DebugConfiguration.h\"
-D USE_PACKET_API
-D LGFX_DRIVER=LGFX_HELTEC_V4_TFT
-D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_HELTEC_V4_TFT.h\"
-D VIEW_240x320
-D DISPLAY_SET_RESOLUTION
-D DISPLAY_SIZE=240x320 ; portrait mode
-D LGFX_SPI_3WIRE=false
-D LGFX_PIN_SCK=16
-D LGFX_PIN_MOSI=15
-D LGFX_PIN_MISO=45
-D LGFX_PIN_DC=48
-D LGFX_PIN_CS=47
-D LGFX_PIN_BL=44
-D LGFX_PIN_RST=21
-D CUSTOM_TOUCH_DRIVER
-D TOUCH_SDA_PIN=I2C_SDA
-D TOUCH_SCL_PIN=I2C_SCL
-D TOUCH_INT_PIN=-1
-D TOUCH_RST_PIN=-1
;base UI
-D TFT_CS=LGFX_PIN_CS
-D ST7789_CS=TFT_CS
-D ST7789_RS=LGFX_PIN_DC
-D ST7789_SDA=LGFX_PIN_MOSI
-D ST7789_SCK=LGFX_PIN_SCK
-D ST7789_RESET=LGFX_PIN_RST
-D ST7789_MISO=LGFX_PIN_MISO
-D ST7789_BUSY=-1
-D ST7789_BL=LGFX_PIN_BL
-D ST7789_SPI_HOST=SPI3_HOST
-D TFT_BL=ST7789_BL
-D SPI_FREQUENCY=75000000
-D SPI_READ_FREQUENCY=SPI_FREQUENCY
-D SPI_3_WIRE=false
-D TFT_HEIGHT=320
-D TFT_WIDTH=240
-D TFT_OFFSET_X=0
-D TFT_OFFSET_Y=0
-D TFT_OFFSET_ROTATION=0
-D SCREEN_ROTATE
-D SCREEN_TRANSITION_FRAMERATE=5
-D BRIGHTNESS_DEFAULT=130 ; Medium Low Brightness
-D HAS_TOUCHSCREEN=1
-D TOUCH_I2C_PORT=0
-D TOUCH_SLAVE_ADDRESS=0x2E
-D SCREEN_TOUCH_INT=TOUCH_INT_PIN
-D SCREEN_TOUCH_RST=TOUCH_RST_PIN
; Have SPI interface SD card slot
-D HAS_SDCARD
-D SDCARD_USE_SPI1
-D SDCARD_USER_SPI_BEGIN
-D SPI_MOSI=LGFX_PIN_MOSI
-D SPI_SCK=LGFX_PIN_SCK
-D SPI_MISO=LGFX_PIN_MISO
-D SPI_CS=3
-D SDCARD_CS=SPI_CS
-D SD_SPI_FREQUENCY=SPI_FREQUENCY
lib_deps = ${heltec_v4_r8_base.lib_deps}
${device-ui_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.19
# renovate: datasource=git-refs depName=Quency-D_chsc6x packageName=https://github.com/Quency-D/chsc6x gitBranch=master
https://github.com/Quency-D/chsc6x/archive/3b2b6cebf3177b3e2c33d06e07909b0b10159516.zip
variants/esp32s3/heltec_v4_r8/variant.h
+72
View File
@@ -0,0 +1,72 @@
#define VEXT_ENABLE 40 // active low, powers the oled display and the lora antenna boost
#define VEXT_ON_VALUE LOW
#define BUTTON_PIN 0
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
#define ADC_MULTIPLIER 4.9 * 1.035
#define USE_SX1262
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 12
#define LORA_DIO1 14 // SX1262 IRQ
#define LORA_DIO2 13 // SX1262 BUSY
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TCXO is enabled
#define LORA_SCK 9
#define LORA_MISO 11
#define LORA_MOSI 10
#define LORA_CS 8
#define SX126X_CS LORA_CS
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// Enable Traffic Management Module for Heltec V4
#ifndef HAS_TRAFFIC_MANAGEMENT
#define HAS_TRAFFIC_MANAGEMENT 1
#endif
#ifndef TRAFFIC_MANAGEMENT_CACHE_SIZE
#define TRAFFIC_MANAGEMENT_CACHE_SIZE 2048
#endif
// ---- KCT8103L RF FRONT END CONFIGURATION ----
// The Heltec V4.3 uses a KCT8103L FEM chip with integrated PA and LNA
// RF path: SX1262 -> Pi attenuator -> KCT8103L PA -> Antenna
// Control logic (from KCT8103L datasheet):
// Transmit PA: CSD=1, CTX=1, CPS=1
// Receive LNA: CSD=1, CTX=0, CPS=X (21dB gain, 1.9dB NF)
// Receive bypass: CSD=1, CTX=1, CPS=0
// Shutdown: CSD=0, CTX=X, CPS=X
// Pin mapping:
// CPS (pin 5) -> SX1262 DIO2: TX/RX path select (automatic via SX126X_DIO2_AS_RF_SWITCH)
// CSD (pin 4) -> GPIO2: Chip enable (HIGH=on, LOW=shutdown)
// CTX (pin 6) -> GPIO5: Switch between Receive LNA Mode and Receive Bypass Mode. (HIGH=RX bypass, LOW=RX LNA)
// VCC0/VCC1 -> Vfem via U3 LDO, controlled by GPIO7
// KCT8103L FEM: TX/RX path switching is handled by DIO2 -> CPS pin (via SX126X_DIO2_AS_RF_SWITCH)
#define USE_KCT8103L_PA
#define LORA_PA_POWER 7 // VFEM_Ctrl - KCT8103L LDO power enable
#define LORA_KCT8103L_PA_CSD 2 // CSD - KCT8103L chip enable (HIGH=on)
#define LORA_KCT8103L_PA_CTX 5 // CTX - Switch between Receive LNA Mode and Receive Bypass Mode. (HIGH=RX bypass, LOW=RX LNA)
#if HAS_TFT
#define USE_TFTDISPLAY 1
#endif
/*
* GPS pins
*/
#define GPS_L76K
#define PIN_GPS_EN (42)
#define GPS_EN_ACTIVE LOW
#define PERIPHERAL_WARMUP_MS 1000 // Make sure I2C QuickLink has stable power before continuing
#define PIN_GPS_PPS (41)
// Seems to be missing on this new board
#define GPS_TX_PIN (38) // This is for bits going TOWARDS the CPU
#define GPS_RX_PIN (39) // This is for bits going TOWARDS the GPS
#define GPS_THREAD_INTERVAL 50
variants/esp32s3/heltec_vision_master_t190/platformio.ini
+1 -1
View File
@@ -20,5 +20,5 @@ build_flags =
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-st7789 packageName=https://github.com/meshtastic/st7789 gitBranch=main
https://github.com/meshtastic/st7789/archive/92bae2e4a307afb430c3b0bc3d661c55ee1565f0.zip
https://github.com/meshtastic/st7789/archive/5180423ae2dbf5885168a8bfb308c7fb7eff6930.zip
upload_speed = 921600
variants/esp32s3/m5stack_cardputer_adv/platformio.ini
+1 -4
View File
@@ -10,13 +10,10 @@ build_flags =
-D M5STACK_CARDPUTER_ADV
-D ARDUINO_USB_CDC_ON_BOOT=1
-I variants/esp32s3/m5stack_cardputer_adv
build_src_filter =
${esp32s3_base.build_src_filter}
+<../variants/esp32s3/m5stack_cardputer_adv>
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-st7789 packageName=https://github.com/meshtastic/st7789 gitBranch=main
https://github.com/meshtastic/st7789/archive/92bae2e4a307afb430c3b0bc3d661c55ee1565f0.zip
https://github.com/meshtastic/st7789/archive/5180423ae2dbf5885168a8bfb308c7fb7eff6930.zip
# renovate: datasource=github-tags depName=pschatzmann_arduino-audio-driver packageName=pschatzmann/arduino-audio-driver
https://github.com/pschatzmann/arduino-audio-driver/archive/v0.2.1.zip
# renovate: datasource=git-refs depName=ESP8266Audio packageName=https://github.com/meshtastic/ESP8266Audio gitBranch=meshtastic-2.0.0-dacfix
variants/esp32s3/m5stack_cardputer_adv/variant.cpp
-40
View File
@@ -1,40 +0,0 @@
#include "AudioBoard.h"
#include "configuration.h"
DriverPins PinsAudioBoardES8311;
AudioBoard board(AudioDriverES8311, PinsAudioBoardES8311);
// M5stack Cardputer ADV specific init
void lateInitVariant()
{
// AudioDriverLogger.begin(Serial, AudioDriverLogLevel::Debug);
// I2C: function, scl, sda
PinsAudioBoardES8311.addI2C(PinFunction::CODEC, Wire);
// I2S: function, mclk, bck, ws, data_out, data_in
PinsAudioBoardES8311.addI2S(PinFunction::CODEC, DAC_I2S_MCLK, DAC_I2S_BCK, DAC_I2S_WS, DAC_I2S_DOUT, DAC_I2S_DIN);
// configure codec
CodecConfig cfg;
cfg.input_device = ADC_INPUT_LINE1;
cfg.output_device = DAC_OUTPUT_ALL;
cfg.i2s.bits = BIT_LENGTH_16BITS;
cfg.i2s.rate = RATE_44K;
board.begin(cfg);
// extra ES8311 init
auto es8311_write_reg = [](uint8_t reg, uint8_t val) {
Wire.beginTransmission(0x18); // ES8311 i2c address
Wire.write(reg);
Wire.write(val);
Wire.endTransmission();
};
es8311_write_reg(0x00, 0x80); // reset, power on
es8311_write_reg(0x01, 0xB5); // MCLK = BCLK
es8311_write_reg(0x02, 0x18); // CLOCK_MANAGER/ MULT_PRE=3
es8311_write_reg(0x0D, 0x01); // analog power up
es8311_write_reg(0x12, 0x00); // DAC power up
es8311_write_reg(0x13, 0x10); // enable HP drive
es8311_write_reg(0x32, 0xBF); // DAC volume (0dB)
es8311_write_reg(0x37, 0x08); // EQ bypass
}
variants/esp32s3/m5stack_cardputer_adv/variant.h
+1
View File
@@ -9,6 +9,7 @@
#define ST7789_BUSY -1
// #define VTFT_CTRL 38
#define VTFT_LEDA 38
#define TFT_BACKLIGHT_ON HIGH
// #define ST7789_BL (32+6)
#define ST7789_SPI_HOST SPI2_HOST
// #define TFT_BL (32+6)
variants/esp32s3/picomputer-s3/variant.h
+1 -2
View File
@@ -47,10 +47,9 @@
#define TFT_OFFSET_Y 0
#define TFT_OFFSET_ROTATION 0
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5
#define SCREEN_TRANSITION_FRAMERATE 30
// Picomputer gets a white on black display
#define TFT_MESH_OVERRIDE COLOR565(255, 255, 255)
#define INPUTBROKER_MATRIX_TYPE 1
variants/esp32s3/seeed-sensecap-indicator/variant.h
+1 -1
View File
@@ -36,7 +36,7 @@
#define TFT_OFFSET_ROTATION 0
#define TFT_BL 45
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5 // fps
#define SCREEN_TRANSITION_FRAMERATE 30 // fps
#define USE_TFTDISPLAY 1
#define HAS_TOUCHSCREEN 1
variants/esp32s3/station-g2/pins_arduino.h
Regular → Executable
View File
variants/esp32s3/station-g2/platformio.ini
Regular → Executable
View File
variants/esp32s3/station-g2/variant.h
Regular → Executable
View File
variants/esp32s3/t-deck-pro-v1_1/pins_arduino.h
+19
View File
@@ -0,0 +1,19 @@
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include <stdint.h>
#define USB_VID 0x303a
#define USB_PID 0x1001
// used for keyboard, touch controller, beam sensor, and gyroscope
static const uint8_t SDA = 13;
static const uint8_t SCL = 14;
// Default SPI will be mapped to Radio
static const uint8_t SS = 3;
static const uint8_t MOSI = 33;
static const uint8_t MISO = 47;
static const uint8_t SCK = 36;
#endif /* Pins_Arduino_h */
variants/esp32s3/t-deck-pro-v1_1/platformio.ini
+41
View File
@@ -0,0 +1,41 @@
[env:t-deck-pro-v1_1]
custom_meshtastic_hw_model = 102
custom_meshtastic_hw_model_slug = T_DECK_PRO
custom_meshtastic_architecture = esp32-s3
custom_meshtastic_actively_supported = true
custom_meshtastic_support_level = 1
custom_meshtastic_display_name = LILYGO T-Deck Pro
custom_meshtastic_images = tdeck_pro.svg
custom_meshtastic_tags = LilyGo
custom_meshtastic_requires_dfu = true
custom_meshtastic_partition_scheme = 16MB
extends = esp32s3_base
board = t-deck-pro
board_check = true
upload_protocol = esptool
build_flags =
${esp32s3_base.build_flags} -I variants/esp32s3/t-deck-pro-v1_1
-D T_DECK_PRO
-D USE_EINK
-D EINK_DISPLAY_MODEL=GxEPD2_310_GDEQ031T10
-D EINK_WIDTH=240
-D EINK_HEIGHT=320
;-D USE_EINK_DYNAMICDISPLAY ; Enable Dynamic EInk
-D EINK_LIMIT_FASTREFRESH=10 ; How many consecutive fast-refreshes are permitted
-D EINK_LIMIT_GHOSTING_PX=2000 ; (Optional) How much image ghosting is tolerated
-D EINK_NOT_HIBERNATE ; Disable hibernate to avoid issues with elink
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.9
# renovate: datasource=git-refs depName=CSE_Touch packageName=https://github.com/CIRCUITSTATE/CSE_Touch gitBranch=main
https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
# renovate: datasource=github-tags depName=CSE_CST328 packageName=CIRCUITSTATE/CSE_CST328
https://github.com/CIRCUITSTATE/CSE_CST328/archive/refs/tags/v0.0.4.zip
# renovate: datasource=git-refs depName=BQ27220 packageName=https://github.com/mverch67/BQ27220 gitBranch=main
https://github.com/mverch67/BQ27220/archive/07d92be846abd8a0258a50c23198dac0858b22ed.zip
# renovate: datasource=custom.pio depName=Adafruit DRV2605 packageName=adafruit/library/Adafruit DRV2605 Library
adafruit/Adafruit DRV2605 Library@1.2.4
variants/esp32s3/t-deck-pro-v1_1/variant.h
+106
View File
@@ -0,0 +1,106 @@
// Display (E-Ink)
#define PIN_EINK_CS 34
#define PIN_EINK_BUSY 37
#define PIN_EINK_DC 35
#define PIN_EINK_RES 16
#define PIN_EINK_SCLK 36
#define PIN_EINK_MOSI 47
#define TFT_BL 45 // option , default not backlight
#define I2C_SDA SDA
#define I2C_SCL SCL
// CST328 touch screen (implementation in src/platform/extra_variants/t_deck_pro/variant.cpp)
#define HAS_TOUCHSCREEN 1
#define CST328_PIN_INT 12
#define CST328_PIN_RST 38
#define USE_POWERSAVE
#define SLEEP_TIME 120
// GNSS
#define HAS_GPS 1
#define GPS_BAUDRATE 38400
#define PIN_GPS_EN 39
#define GPS_EN_ACTIVE 1
#define GPS_RX_PIN 44
#define GPS_TX_PIN 43
#define PIN_GPS_PPS 1
#define BUTTON_PIN 0
// vibration motor
#define HAS_DRV2605
#define PIN_DRV_EN 2
// Have SPI interface SD card slot
#define HAS_SDCARD
#define SDCARD_USE_SPI1
#define SPI_MOSI (33)
#define SPI_SCK (36)
#define SPI_MISO (47)
#define SPI_CS (48)
#define SDCARD_CS SPI_CS
#define SD_SPI_FREQUENCY 75000000U
// TCA8418 keyboard
#define KB_BL_PIN 42
#define CANNED_MESSAGE_MODULE_ENABLE 1
// microphone PCM5102A
#define PCM5102A_SCK 47
#define PCM5102A_DIN 17
#define PCM5102A_LRCK 18
// LTR_553ALS light sensor
#define HAS_LTR553ALS
// gyroscope BHI260AP
// #define BOARD_1V8_EN 38 //Deck-Pro remove 1.8v en pin
#define HAS_BHI260AP
// battery charger BQ25896
#define HAS_PPM 1
#define XPOWERS_CHIP_BQ25896
// battery quality management BQ27220
#define HAS_BQ27220 1
#define BQ27220_I2C_SDA SDA
#define BQ27220_I2C_SCL SCL
#define BQ27220_DESIGN_CAPACITY 1400
// LoRa
#define USE_SX1262
#define USE_SX1268
#define LORA_EN 46 // LoRa enable pin
#define LORA_SCK 36
#define LORA_MISO 47
#define LORA_MOSI 33
#define LORA_CS 3
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 4
#define LORA_DIO1 5 // SX1262 IRQ
#define LORA_DIO2 6 // SX1262 BUSY
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
#define SX126X_CS LORA_CS // FIXME - we really should define LORA_CS instead
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
// Not really an E22 but TTGO seems to be trying to clone that
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 2.4
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
// code)
#define MODEM_POWER_EN 41
#define MODEM_PWRKEY 40
#define MODEM_RST 9
#define MODEM_RI 7
#define MODEM_DTR 8
#define MODEM_RX 10
#define MODEM_TX 11
#define HAS_PHYSICAL_KEYBOARD 1
variants/esp32s3/t-deck-pro/platformio.ini
+1 -1
View File
@@ -34,7 +34,7 @@ build_flags =
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
# renovate: datasource=git-refs depName=CSE_Touch packageName=https://github.com/CIRCUITSTATE/CSE_Touch gitBranch=main
https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
# renovate: datasource=github-tags depName=CSE_CST328 packageName=CIRCUITSTATE/CSE_CST328
variants/esp32s3/t-deck/variant.h
+1 -1
View File
@@ -20,7 +20,7 @@
#define TFT_OFFSET_Y 0
#define TFT_OFFSET_ROTATION 0
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5
#define SCREEN_TRANSITION_FRAMERATE 30
#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
#define USE_TFTDISPLAY 1
#define HAS_PHYSICAL_KEYBOARD 1
variants/esp32s3/t-watch-s3/variant.h
+4 -1
View File
@@ -39,9 +39,10 @@
#define DAC_I2S_BCK 48
#define DAC_I2S_WS 15
#define DAC_I2S_DOUT 46
#define DAC_I2S_MCLK 0
#define DAC_I2S_MCLK -1
#define HAS_AXP2101
#define PMU_POWER_BUTTON_IS_CANCEL // maps a short click of the power button to a cancel action (turning off the screen)
// PCF8563 RTC Module
#define PCF8563_RTC 0x51
@@ -60,6 +61,8 @@
#define BUTTON_PIN 0 // only for Plus version
#define PMU_IRQ 21 // Interrupt pin for the PMU
#define USE_SX1262
#define USE_SX1268
variants/esp32s3/t5s3_epaper/nicheGraphics.h
+45 -49
View File
@@ -6,26 +6,27 @@ NicheGraphics attempts a different approach:
Per-device config takes place in this setupNicheGraphics() method
(And a small amount in platformio.ini)
This file sets up InkHUD for Heltec VM-E290.
Different NicheGraphics UIs and different hardware variants will each have their own setup procedure.
This file sets up InkHUD for the LilyGo T5-E-Paper-S3-Pro.
The board uses a 4.7" ED047TC1 parallel e-paper display (960×540, 8-bit parallel interface).
This is driven via the FastEPD library through the NicheGraphics ED047TC1 driver adapter.
*/
#pragma once
#include "configuration.h"
#include "mesh/MeshModule.h"
#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
// InkHUD-specific components
// ---------------------------
// #include "graphics/niche/InkHUD/InkHUD.h"
#include "graphics/niche/InkHUD/WindowManager.h"
#include "graphics/niche/InkHUD/InkHUD.h"
// Applets
#include "graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h"
#include "graphics/niche/InkHUD/Applets/User/DM/DMApplet.h"
#include "graphics/niche/InkHUD/Applets/User/FavoritesMap/FavoritesMapApplet.h"
#include "graphics/niche/InkHUD/Applets/User/Heard/HeardApplet.h"
#include "graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h"
#include "graphics/niche/InkHUD/Applets/User/RecentsList/RecentsListApplet.h"
@@ -33,27 +34,20 @@ Different NicheGraphics UIs and different hardware variants will each have their
// Shared NicheGraphics components
// --------------------------------
#include "graphics/niche/Drivers/Backlight/LatchingBacklight.h"
#include "graphics/niche/Drivers/EInk/DEPG0290BNS800.h"
#include "graphics/niche/Drivers/EInk/ED047TC1.h"
#include "graphics/niche/Inputs/TwoButton.h"
void setupNicheGraphics()
{
using namespace NicheGraphics;
// SPI
// -----------------------------
// Display is connected to HSPI
SPIClass *hspi = new SPIClass(HSPI);
hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS);
// E-Ink Driver
// -----------------------------
// The ED047TC1 is a parallel display — no SPI bus setup needed.
// begin() args are part of the EInk interface but are ignored for parallel displays.
// Use E-Ink driver
Drivers::EInk *driver = new Drivers::DEPG0290BNS800;
driver->begin(hspi, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY);
Drivers::EInk *driver = new Drivers::ED047TC1;
driver->begin(nullptr, 0, 0, 0);
// InkHUD
// ----------------------------
@@ -67,57 +61,59 @@ void setupNicheGraphics()
// Set how unhealthy additional FAST updates beyond this number are
inkhud->setDisplayResilience(7, 1.5);
// Prepare fonts
InkHUD::Applet::fontLarge = FREESANS_9PT_WIN1252;
InkHUD::Applet::fontSmall = FREESANS_6PT_WIN1252;
// Prepare fonts — use larger sizes to suit the 4.7" screen at ~234 DPI
InkHUD::Applet::fontLarge = FREESANS_24PT_WIN1253;
InkHUD::Applet::fontMedium = FREESANS_18PT_WIN1253;
InkHUD::Applet::fontSmall = FREESANS_12PT_WIN1253;
// Init settings, and customize defaults
// Customize default settings
inkhud->persistence->settings.userTiles.maxCount = 2; // How many tiles can the display handle?
inkhud->persistence->settings.rotation = 1; // 90 degrees clockwise
inkhud->persistence->settings.rotation = 3; // 270 degrees clockwise
inkhud->persistence->settings.userTiles.count = 1; // One tile only by default, keep things simple for new users
inkhud->persistence->settings.optionalMenuItems.nextTile = false; // Behavior handled by aux button instead
inkhud->persistence->settings.optionalFeatures.batteryIcon = true; // Device definitely has a battery
inkhud->persistence->settings.optionalFeatures.batteryIcon = true;
inkhud->persistence->settings.optionalMenuItems.backlight = false;
// Setup backlight
// Note: AUX button behavior configured further down
Drivers::LatchingBacklight *backlight = Drivers::LatchingBacklight::getInstance();
backlight->setPin(PIN_EINK_EN);
// Alignment must cancel rotation for visual-frame touch input: (rotation + alignment) % 4 == 0.
inkhud->persistence->settings.joystick.alignment = (4 - inkhud->persistence->settings.rotation) % 4;
// Pick applets
// Note: order of applets determines priority of "auto-show" feature
// Optional arguments for defaults:
// - is activated?
// - is autoshown?
// - is foreground on a specific tile (index)?
inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet, true, true); // Activated, autoshown
inkhud->addApplet("DMs", new InkHUD::DMApplet);
inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0));
inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1));
inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true); // Activated
inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet);
inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet, false, false); // Not Active, not autoshown
inkhud->addApplet("DMs", new InkHUD::DMApplet, true, true); // Activated, Autoshown
inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0), true, true); // Activated, Autoshown
inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1), false, false); // Not Active, not autoshown
inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true, false); // Activated, not autoshown
inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet, true, false); // Activated, not autoshown
inkhud->addApplet("Heard", new InkHUD::HeardApplet, true, false, 0); // Activated, not autoshown, default on tile 0
// inkhud->addApplet("Basic", new InkHUD::BasicExampleApplet);
// inkhud->addApplet("NewMsg", new InkHUD::NewMsgExampleApplet);
inkhud->addApplet("Favorites Map", new InkHUD::FavoritesMapApplet, false, false); // Not Active, not autoshown
// Enable reusable InkHUD touch status indicator for this touch-capable board.
inkhud->setTouchEnabledProvider(isTouchInputEnabled);
// Start running InkHUD
inkhud->begin();
// Arm GT911 capacitive-home callback only after InkHUD startup is complete.
t5SetHomeCapButtonEventsEnabled(true);
// Keep Wireless Paper single-button semantics regardless of persisted settings:
// short press advances, long press opens menu/selects.
inkhud->persistence->settings.joystick.enabled = false;
// Buttons
// --------------------------
Inputs::TwoButton *buttons = Inputs::TwoButton::getInstance(); // A shared NicheGraphics component
// Setup the main user button (0)
// #0: BOOT button (primary user input for InkHUD navigation on T5-S3)
#if defined(T5_S3_EPAPER_PRO_V1)
buttons->setWiring(0, PIN_BUTTON2);
#else
buttons->setWiring(0, BUTTON_PIN);
buttons->setHandlerShortPress(0, []() { InkHUD::InkHUD::getInstance()->shortpress(); });
buttons->setHandlerLongPress(0, []() { InkHUD::InkHUD::getInstance()->longpress(); });
// Setup the aux button (1)
// Bonus feature of VME290
buttons->setWiring(1, BUTTON_PIN_SECONDARY);
buttons->setHandlerShortPress(1, []() { InkHUD::InkHUD::getInstance()->nextTile(); });
#endif
buttons->setHandlerShortPress(0, [inkhud]() { inkhud->shortpress(); });
buttons->setHandlerLongPress(0, [inkhud]() { inkhud->longpress(); });
buttons->start();
}
#endif
#endif
variants/esp32s3/t5s3_epaper/platformio.ini
+1 -1
View File
@@ -5,7 +5,7 @@ board_build.partition = default_16MB.csv
board_check = true
upload_protocol = esptool
build_flags = -fno-strict-aliasing
${esp32_base.build_flags}
${esp32s3_base.build_flags}
-I variants/esp32s3/t5s3_epaper
-D T5_S3_EPAPER_PRO
-D USE_EINK
variants/esp32s3/t5s3_epaper/variant.cpp
+29 -37
View File
@@ -1,28 +1,9 @@
#include "configuration.h"
#ifdef T5_S3_EPAPER_PRO
#include "TouchDrvGT911.hpp"
#include "Wire.h"
#include "input/TouchScreenImpl1.h"
TouchDrvGT911 touch;
bool readTouch(int16_t *x, int16_t *y)
{
if (!digitalRead(GT911_PIN_INT)) {
int16_t raw_x;
int16_t raw_y;
if (touch.getPoint(&raw_x, &raw_y)) {
// rotate 90° for landscape
*x = raw_y;
*y = EPD_WIDTH - 1 - raw_x;
LOG_DEBUG("touched(%d/%d)", *x, *y);
return true;
}
}
return false;
}
// Pin-level early init only. All touch, backlight, and InkHUD code lives in
// src/platform/extra_variants/t5s3_epaper/variant.cpp where PlatformIO's
// library dependency finder can resolve headers like TouchDrvGT911.hpp.
#include "variant.h"
#include "Arduino.h"
#include "pins_arduino.h"
void earlyInitVariant()
{
@@ -31,17 +12,28 @@ void earlyInitVariant()
pinMode(SDCARD_CS, OUTPUT);
digitalWrite(SDCARD_CS, HIGH);
pinMode(BOARD_BL_EN, OUTPUT);
}
// Backlight ON at boot (active-HIGH). Full backlight state management
// lives in src/platform/extra_variants/t5s3_epaper/variant.cpp.
digitalWrite(BOARD_BL_EN, HIGH);
// T5-S3-ePaper Pro specific (late-) init
void lateInitVariant(void)
{
touch.setPins(GT911_PIN_RST, GT911_PIN_INT);
if (touch.begin(Wire, GT911_SLAVE_ADDRESS_L, GT911_PIN_SDA, GT911_PIN_SCL)) {
touchScreenImpl1 = new TouchScreenImpl1(EPD_WIDTH, EPD_HEIGHT, readTouch);
touchScreenImpl1->init();
} else {
LOG_ERROR("Failed to find touch controller!");
}
// Program GT911 touch controller to I2C address 0x14 (GT911_SLAVE_ADDRESS_H) before
// the I2C bus scan runs. GPIO3 (INT) defaults LOW on ESP32-S3 cold boot, which would
// leave the GT911 at 0x5D (GT911_SLAVE_ADDRESS_L) — the same address as the SFA30
// air quality sensor — causing a false-positive SFA30 detection during the I2C scan.
//
// GT911 datasheet §4.3 "Address Selection":
// Pull INT HIGH before releasing RST → device latches address 0x14 (SLAVE_ADDRESS_H)
// Pull INT LOW before releasing RST → device latches address 0x5D (SLAVE_ADDRESS_L)
// Minimum RST assert time: 100 µs; minimum startup time after RST deassert: 5 ms.
//
// lateInitVariant() calls touch.begin() which repeats this sequence internally while
// also performing full I2C initialisation; the double-reset is harmless.
pinMode(GT911_PIN_RST, OUTPUT);
digitalWrite(GT911_PIN_RST, LOW);
pinMode(GT911_PIN_INT, OUTPUT);
digitalWrite(GT911_PIN_INT, HIGH); // HIGH → latch address 0x14
delay(1); // > 100 µs
digitalWrite(GT911_PIN_RST, HIGH);
delay(10); // > 5 ms startup
pinMode(GT911_PIN_INT, INPUT); // release INT for interrupt use
}
#endif
variants/esp32s3/t5s3_epaper/variant.h
+34 -3
View File
@@ -16,6 +16,11 @@
#define I2C_SCL SCL
#define HAS_TOUCHSCREEN 1
#define TOUCH_POLL_INTERVAL_IDLE 25
#define TOUCH_POLL_INTERVAL_ACTIVE 15
#define TOUCH_POLL_INTERVAL_RELEASE 20
#define TOUCH_POLL_INTERVAL_ACTIVE_FAST 8
#define TOUCH_POLL_INTERVAL_RELEASE_FAST 8
#define GT911_PIN_SDA SDA
#define GT911_PIN_SCL SCL
#if defined(T5_S3_EPAPER_PRO_V1)
@@ -25,10 +30,34 @@
#define GT911_PIN_INT 3
#define GT911_PIN_RST 9
#endif
// Do not use touch as a light-sleep wake source on T5-S3.
// Wake should come from physical buttons/radio/timer only.
#define SCREEN_TOUCH_INT GT911_PIN_INT
#define PCF85063_RTC 0x51
// Touch control helpers for this variant
bool isTouchInputEnabled();
void setTouchInputEnabled(bool enabled, bool showIndicator);
void toggleTouchInputEnabled();
// Backlight control helpers for this variant (non-latching behavior)
void t5BacklightSetUserEnabled(bool enabled);
bool t5BacklightIsUserEnabled();
void t5BacklightToggleUser();
void t5BacklightSetForcedByTimeout(bool forced);
void t5BacklightSetForcedBySleep(bool forced);
void t5BacklightHandleUserInput();
// Touch timeout/wake helpers for this variant
void t5TouchSetForcedByTimeout(bool forced);
bool t5TouchIsForcedByTimeout();
void t5TouchHandleUserInput();
// Gate GT911 capacitive-home callback delivery until InkHUD startup is complete.
void t5SetHomeCapButtonEventsEnabled(bool enabled);
#define PCF8563_RTC 0x51
#define HAS_RTC 1
#define PCF85063_INT 2
#define PCF8563_INT 2
#define USE_POWERSAVE
#define SLEEP_TIME 120
@@ -45,8 +74,10 @@
#define ALT_BUTTON_PIN PIN_BUTTON2
#else
#define BUTTON_PIN 0
#define BOARD_PCA9535_ADDR 0x20
#define BOARD_PCA9535_INT 38
#define BOARD_PCA9535_BUTTON_MASK 0x04
#endif
// SD card
#define HAS_SDCARD
#define SDCARD_CS SPI_CS
variants/esp32s3/tbeam-s3-core/variant.h
+4 -6
View File
@@ -9,8 +9,6 @@
#define BUTTON_PIN 0 // The middle button GPIO on the T-Beam S3
// #define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
#define LED_STATE_ON 0 // State when LED is lit
// TTGO uses a common pinout for their SX1262 vs RF95 modules - both can be enabled and we will probe at runtime for RF95 and if
// not found then probe for SX1262
#define USE_SX1262
@@ -48,9 +46,9 @@
#define LR11X0_DIO_AS_RF_SWITCH
#endif
// Leave undefined to disable our PMU IRQ handler. DO NOT ENABLE THIS because the pmuirq can cause sperious interrupts
// and waking from light sleep
// #define PMU_IRQ 40
// Voiding warrenties, we're gonna try the IRQ
#define PMU_IRQ 40
#define PMU_POWER_BUTTON_IS_CANCEL // maps a short click of the power button to a cancel action (turning off the screen)
#define HAS_AXP2101
// PCF8563 RTC Module
@@ -76,4 +74,4 @@
// has 32768 Hz crystal
#define HAS_32768HZ 1
#define USE_SH1106
#define USE_SH1106
variants/esp32s3/tlora-pager/variant.h
+1 -1
View File
@@ -18,7 +18,7 @@
#define TFT_OFFSET_Y 0
#define TFT_OFFSET_ROTATION 3
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5
#define SCREEN_TRANSITION_FRAMERATE 30
#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
#define USE_TFTDISPLAY 1
#define HAS_PHYSICAL_KEYBOARD 1
variants/esp32s3/tracksenger/internal/variant.h
+1 -2
View File
@@ -73,7 +73,6 @@
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// Picomputer gets a white on black display
#define TFT_MESH_OVERRIDE COLOR565(255, 255, 255)
// keyboard changes
@@ -89,4 +88,4 @@
{ \
26, 37, 17, 16, 15, 7 \
}
// #end keyboard
// #end keyboard
variants/esp32s3/tracksenger/lcd/variant.h
+1 -2
View File
@@ -97,7 +97,6 @@
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// Picomputer gets a white on black display
#define TFT_MESH_OVERRIDE COLOR565(255, 255, 255)
// keyboard changes
@@ -113,4 +112,4 @@
{ \
26, 37, 17, 16, 15, 7 \
}
// #end keyboard
// #end keyboard
variants/esp32s3/tracksenger/oled/variant.h
+1 -2
View File
@@ -74,7 +74,6 @@
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// Picomputer gets a white on black display
#define TFT_MESH_OVERRIDE COLOR565(255, 255, 255)
// keyboard changes
@@ -90,4 +89,4 @@
{ \
26, 37, 17, 16, 15, 7 \
}
// #end keyboard
// #end keyboard
variants/esp32s3/unphone/variant.h
+2 -2
View File
@@ -35,7 +35,7 @@
#define TFT_OFFSET_ROTATION 6 // unPhone's screen wired unusually, 0 typical
#define TFT_INVERT false
#define SCREEN_ROTATE true
#define SCREEN_TRANSITION_FRAMERATE 5
#define SCREEN_TRANSITION_FRAMERATE 30
#define USE_TFTDISPLAY 1
#define HAS_TOUCHSCREEN 1
@@ -74,4 +74,4 @@
// #define BATTERY_PIN 13 // battery V measurement pin; vbat divider is here
// #define ADC_CHANNEL ADC2_GPIO13_CHANNEL
// #define BAT_MEASURE_ADC_UNIT 2
// #define BAT_MEASURE_ADC_UNIT 2
variants/native/portduino.ini
+20 -10
View File
@@ -2,7 +2,7 @@
[portduino_base]
platform =
# renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
https://github.com/meshtastic/platform-native/archive/71ed55bb95feb3c43ebde1ec1e2e17643a424c04.zip
https://github.com/meshtastic/platform-native/archive/cab4b21d902973e43c938dab3cf4844ba02547ec.zip
framework = arduino
build_src_filter =
@@ -37,25 +37,35 @@ lib_deps =
# renovate: datasource=github-tags depName=Adafruit_BME680 packageName=adafruit/Adafruit_BME680
https://github.com/adafruit/Adafruit_BME680/archive/refs/tags/2.0.6.zip
build_flags =
; Cross-platform build flags shared between native (Linux) and native-macos builds.
; Anything Linux-only (libbluetooth, libgpiod, libi2c, /sys/class/gpio,
; PORTDUINO_LINUX_HARDWARE, glibc-style _FORTIFY_SOURCE) goes in `build_flags`
; instead. UDP multicast also lives there because the firmware's
; UdpMulticastHandler.h unconditionally `#include <WiFi.h>` on non-NRF52
; targets, which requires the framework's bundled WiFi shim that we
; lib_ignore on macOS.
build_flags_common =
${arduino_base.build_flags}
-D ARCH_PORTDUINO
-fPIC
-D_FORTIFY_SOURCE=2
-fstack-protector-all -Wstack-protector --param ssp-buffer-size=4
-Isrc/platform/portduino
-DRADIOLIB_EEPROM_UNSUPPORTED
-DPORTDUINO_LINUX_HARDWARE
-DHAS_UDP_MULTICAST=1
-lpthread
-lstdc++fs
-lbluetooth
-lgpiod
-lyaml-cpp
-li2c
-luv
-std=gnu17
-std=gnu++17
build_flags =
${portduino_base.build_flags_common}
-DHAS_UDP_MULTICAST=1
-D_FORTIFY_SOURCE=2
-fstack-protector-all -Wstack-protector --param ssp-buffer-size=4
-DPORTDUINO_LINUX_HARDWARE
-lstdc++fs
-lbluetooth
-lgpiod
-li2c
lib_ignore =
Adafruit NeoPixel
Adafruit ST7735 and ST7789 Library
variants/native/portduino/platformio.ini
+125
View File
@@ -117,3 +117,128 @@ build_flags = -lgcov --coverage -fprofile-abs-path -fsanitize=address ${env:nati
test_testing_command =
${platformio.build_dir}/${this.__env__}/meshtasticd
-s
; ---------------------------------------------------------------------------
; Native build for macOS (Darwin / arm64 + x86_64). Headless meshtasticd that
; runs in SimRadio mode (`-s`) or against real LoRa hardware via a CH341
; USB-SPI bridge. No BlueZ, libgpiod, or Linux I2C — those require Linux.
;
; Prerequisites (Homebrew):
; brew install platformio yaml-cpp libuv openssl@3 libusb argp-standalone pkg-config
; # Optional: enable the HTTP API (PiWebServer) on macOS:
; brew install ulfius
;
; The macOS-side patches now live upstream:
; * meshtastic/platform-native — `String.h`-shadow shim, `-Wno-enum-constexpr-conversion`,
; empty-variant-dir guard. Pulled via `portduino_base.platform` zip pin.
; * meshtastic/framework-portduino — LinuxHardwareI2C macOS stubs, AsyncUDP
; SOCK_NONBLOCK fallback, Common.h __APPLE__ guard, WiFiServer.cpp extern-C
; fix, package.json URL refresh. Pulled by platform-native at its pinned commit.
; This env therefore only carries the firmware-side build flags and src filter.
;
; Real LoRa hardware on macOS:
; The same lib_dep `pine64/libch341-spi-userspace` used on Linux works on
; macOS as-is — its `libusb_detach_kernel_driver()` call is `__linux__`-
; guarded, but on macOS the kernel doesn't bind a driver to a CH341A SPI
; bridge (PID 0x5512; bDeviceClass=0xff vendor-specific) by default, so
; no detach is needed. Apple's bundled CH34x driver targets the CH340
; *UART* variant (PID 0x7523) — different product. libusb opens the device
; and claims interface 0 directly via IOUSBHostInterface.
;
; To use, point `meshtasticd` at any of the existing `bin/config.d/lora-*.yaml`
; files that specify `spidev: ch341` — they're platform-agnostic. Example:
; pio run -e native-macos
; mkdir -p ~/.meshtasticd && cp bin/config-dist.yaml ~/.meshtasticd/config.yaml
; # Edit ~/.meshtasticd/config.yaml: ConfigDirectory: ./config.d/
; mkdir ~/.meshtasticd/config.d && cp bin/config.d/lora-meshstick-1262.yaml ~/.meshtasticd/config.d/
; cd ~/.meshtasticd && /path/to/firmware/.pio/build/native-macos/meshtasticd
;
; The MAC address auto-derives from the CH341's USB serial + product string
; (PortduinoGlue.cpp ~497-518); on Linux a BlueZ HCI socket is the fallback
; when that path isn't taken, but BlueZ is `__linux__`-guarded so the
; serial-derivation path is mandatory on macOS. Override with
; `MACAddress: AA:BB:CC:DD:EE:FF` in config.yaml's `General:` section if
; the device's serial isn't 8 hex chars.
;
; Diagnosing CH341 issues on macOS:
; ioreg -p IOUSB -l -w 0 | grep -B2 -A30 0x5512
; Children should be `IOUSBHostInterface`. If a vendor driver class
; (e.g. `com.wch.CH34xVCPDriver` from a third-party WCH installer)
; claims interface 0, libusb will fail with LIBUSB_ERROR_BUSY.
; Workaround: `sudo kmutil unload -b <bundleID>`.
; LIBUSB_DEBUG=4 .pio/build/native-macos/meshtasticd
; Verbose libusb trace — useful when claim_interface fails.
; ---------------------------------------------------------------------------
[env:native-macos]
extends = native_base
; Apple's ld doesn't accept GNU ld's `-Wl,-Map,<file>` syntax (inherited from
; the top-level platformio.ini). Strip it; the linker map isn't useful for
; the macOS dev loop anyway, and Apple ld's equivalent (`-Wl,-map,<file>`)
; uses different argument shape.
build_unflags = -Wl,-Map,"${platformio.build_dir}"/output.map
build_flags = ${portduino_base.build_flags_common}
-I variants/native/portduino
-I/opt/homebrew/include
-I/opt/homebrew/opt/argp-standalone/include
-I/opt/homebrew/opt/yaml-cpp/include
-L/opt/homebrew/lib
-L/opt/homebrew/opt/argp-standalone/lib
-L/opt/homebrew/opt/yaml-cpp/lib
-largp
-DPORTDUINO_DARWIN
; Headless build — variants/native/portduino/variant.h would otherwise
; default HAS_SCREEN to 1 and pull in screen-renderer source that uses
; VLA-with-initializer (a GNU/GCC extension Apple Clang rejects).
; MESHTASTIC_EXCLUDE_SCREEN gates the optional `screen->setHeading(...)`-
; style screen-driver hooks scattered through sensor sources.
-DHAS_SCREEN=0
-DMESHTASTIC_EXCLUDE_SCREEN=1
; openssl@3 is the keg-only Homebrew formula; --cflags is required so the
; compiler finds <openssl/*.h> in the Homebrew prefix (not just the linker).
!pkg-config --cflags --libs openssl --silence-errors || :
; PiWebServer (src/mesh/raspihttp/PiWebServer.cpp) auto-engages when ulfius
; headers are reachable via `#if __has_include(<ulfius.h>)`. The `|| :`
; tail keeps the build green when the user hasn't run `brew install ulfius`
; — they just don't get the HTTP API in that case.
!pkg-config --cflags --libs liborcania --silence-errors || :
!pkg-config --cflags --libs libyder --silence-errors || :
!pkg-config --cflags --libs libulfius --silence-errors || :
; src/input/Linux*.{cpp,h} drive evdev (`<linux/input.h>`) which doesn't exist
; on macOS. graphics/Panel_sdl.* and graphics/TFTDisplay.cpp pull LovyanGFX
; (which we lib_ignore on macOS for the <malloc.h> issue). Neither is needed
; for the headless build.
build_src_filter = ${native_base.build_src_filter}
-<input/LinuxInput.cpp>
-<input/LinuxInputImpl.cpp>
-<graphics/Panel_sdl.cpp>
-<graphics/TFTDisplay.cpp>
; LovyanGFX includes <malloc.h> (Linux-only) and is only needed by TFT
; variants — not relevant for the headless macOS build.
lib_ignore =
${portduino_base.lib_ignore}
LovyanGFX
; ---------------------------------------------------------------------------
; Same as [env:native-macos] but built with AddressSanitizer for catching
; use-after-free, leaks, and OOB access during local development. Headless
; (no SDL/X11/libinput) so it stays cheap to build. Mirrors the shape of
; [env:native-tft-debug] but without the TFT/X11 dependencies.
;
; pio run -e native-macos-debug
; .pio/build/native-macos-debug/meshtasticd -s
;
; ASan runtime tuning (set in the shell before launching):
; ASAN_OPTIONS=detect_leaks=1:halt_on_error=0:abort_on_error=1
; MallocStackLogging=1 # macOS: nicer stack traces in malloc reports
; ---------------------------------------------------------------------------
[env:native-macos-debug]
extends = native_base
build_type = debug
build_unflags = ${env:native-macos.build_unflags}
build_flags = ${env:native-macos.build_flags}
-O0
-g
-fsanitize=address
-fno-omit-frame-pointer
build_src_filter = ${env:native-macos.build_src_filter}
lib_ignore = ${env:native-macos.lib_ignore}
variants/nrf52840/Dongle_nRF52840-pca10059-v1/platformio.ini
+1 -1
View File
@@ -12,5 +12,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/Dongle_
lib_deps =
${nrf52840_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
debug_tool = jlink
variants/nrf52840/ELECROW-ThinkNode-M4/variant.h
-1
View File
@@ -85,7 +85,6 @@ static const uint8_t A0 = PIN_A0;
// charger status
#define EXT_CHRG_DETECT (32 + 6)
#define EXT_CHRG_DETECT_VALUE HIGH
// SPI
#define SPI_INTERFACES_COUNT 1
variants/nrf52840/ELECROW-ThinkNode-M6/variant.cpp
+8 -3
View File
@@ -20,6 +20,7 @@
#include "variant.h"
#include "nrf.h"
#include "power.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
@@ -65,7 +66,11 @@ void variant_shutdown()
nrf_gpio_pin_sense_t sense1 = NRF_GPIO_PIN_SENSE_LOW;
nrf_gpio_cfg_sense_set(PIN_BUTTON1, sense1);
nrf_gpio_cfg_input(EXT_CHRG_DETECT, NRF_GPIO_PIN_PULLUP); // Configure the pin to be woken up as an input
nrf_gpio_pin_sense_t sense2 = NRF_GPIO_PIN_SENSE_LOW;
nrf_gpio_cfg_sense_set(EXT_CHRG_DETECT, sense2);
// If we are sleeping because of low battery, wake up when the solar charger detects power.
// But if the user intentionally put us to sleep with the button, don't wake up just because the lights are on
if (power->isLowBattery()) {
nrf_gpio_cfg_input(EXT_CHRG_DETECT, NRF_GPIO_PIN_PULLUP); // Configure the pin to be woken up as an input
nrf_gpio_pin_sense_t sense2 = NRF_GPIO_PIN_SENSE_LOW;
nrf_gpio_cfg_sense_set(EXT_CHRG_DETECT, sense2);
}
}
variants/nrf52840/ELECROW-ThinkNode-M6/variant.h
+1 -1
View File
@@ -138,7 +138,7 @@ static const uint8_t A0 = PIN_A0;
#define HAS_SOLAR
#define OCV_ARRAY 4080, 3990, 3935, 3880, 3825, 3770, 3715, 3660, 3605, 3550, 3450
#define OCV_ARRAY 4080, 3990, 3935, 3880, 3825, 3770, 3715, 3660, 3605, 3550, 3490
#ifdef __cplusplus
}
variants/nrf52840/ME25LS01-4Y10TD_e-ink/platformio.ini
+1 -1
View File
@@ -16,7 +16,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ME25LS0
lib_deps =
${nrf52840_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
upload_protocol = nrfutil
;upload_port = /dev/ttyACM1
variants/nrf52840/MakePython_nRF52840_eink/platformio.ini
+1 -1
View File
@@ -15,6 +15,6 @@ lib_deps =
# renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
debug_tool = jlink
;upload_port = /dev/ttyACM4
variants/nrf52840/TWC_mesh_v4/platformio.ini
+1 -1
View File
@@ -9,5 +9,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/TWC_mes
lib_deps =
${nrf52840_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
debug_tool = jlink
variants/nrf52840/heltec_mesh_node_t114/platformio.ini
+1 -1
View File
@@ -23,4 +23,4 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/heltec_
lib_deps =
${nrf52840_base.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-st7789 packageName=https://github.com/meshtastic/st7789 gitBranch=main
https://github.com/meshtastic/st7789/archive/92bae2e4a307afb430c3b0bc3d661c55ee1565f0.zip
https://github.com/meshtastic/st7789/archive/5180423ae2dbf5885168a8bfb308c7fb7eff6930.zip
variants/nrf52840/heltec_mesh_node_t114/variant.h
-3
View File
@@ -57,9 +57,6 @@ extern "C" {
#define TFT_OFFSET_X 0
#define TFT_OFFSET_Y 0
// T114 gets a muted yellow on black display
#define TFT_MESH_OVERRIDE COLOR565(255, 255, 128)
// #define TFT_OFFSET_ROTATION 0
// #define SCREEN_ROTATE
// #define SCREEN_TRANSITION_FRAMERATE 5
variants/nrf52840/heltec_mesh_solar/platformio.ini
+1 -1
View File
@@ -132,4 +132,4 @@ build_flags = ${heltec_mesh_solar_base.build_flags}
lib_deps =
${heltec_mesh_solar_base.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-st7789 packageName=https://github.com/meshtastic/st7789 gitBranch=main
https://github.com/meshtastic/st7789/archive/92bae2e4a307afb430c3b0bc3d661c55ee1565f0.zip
https://github.com/meshtastic/st7789/archive/5180423ae2dbf5885168a8bfb308c7fb7eff6930.zip
variants/nrf52840/nrf52.ini
+1 -1
View File
@@ -7,7 +7,7 @@ extends = arduino_base
platform_packages =
; our custom Git version with C++17 support in platform.txt
# TODO renovate
platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#cpp17-platform
platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#master
; Don't renovate toolchain-gccarmnoneeabi
platformio/toolchain-gccarmnoneeabi@~1.90301.0
variants/nrf52840/rak3401_1watt/variant.h
+3 -1
View File
@@ -166,7 +166,9 @@ static const uint8_t SCK = PIN_SPI_SCK;
// Testing USB detection
#define NRF_APM
// If using a power chip like the INA3221 you can override the default battery voltage channel below
// and comment out NRF_APM to use the INA3221 instead of the USB detection for charging
// and comment out NRF_APM to use the INA3221 instead of the USB detection for charging.
// INA3221Sensor.h provides INA3221_CH1/INA3221_CH2/INA3221_CH3 compatibility aliases, so
// board variants can continue to use the named channel constants here.
// #define INA3221_BAT_CH INA3221_CH2
// #define INA3221_ENV_CH INA3221_CH1
variants/nrf52840/rak4631/variant.h
+3 -1
View File
@@ -220,7 +220,9 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
// Testing USB detection
#define NRF_APM
// If using a power chip like the INA3221 you can override the default battery voltage channel below
// and comment out NRF_APM to use the INA3221 instead of the USB detection for charging
// and comment out NRF_APM to use the INA3221 instead of the USB detection for charging.
// INA3221Sensor.h provides compatibility aliases such as INA3221_CH1/INA3221_CH2/INA3221_CH3,
// so board variants can continue to use the channel names below.
// #define INA3221_BAT_CH INA3221_CH2
// #define INA3221_ENV_CH INA3221_CH1
variants/nrf52840/rak4631_epaper/platformio.ini
+1 -1
View File
@@ -16,7 +16,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
lib_deps =
${nrf52840_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
# renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
melopero/Melopero RV3028@1.2.0
# renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library
variants/nrf52840/rak4631_epaper_onrxtx/platformio.ini
+1 -1
View File
@@ -18,7 +18,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
lib_deps =
${nrf52840_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
# renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
melopero/Melopero RV3028@1.2.0
# renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library
variants/stm32/CDEBYTE_E77-MBL/platformio.ini
+1 -1
View File
@@ -1,7 +1,7 @@
[env:CDEBYTE_E77-MBL]
extends = stm32_base
board = ebyte_e77_dev
board_upload.maximum_size = 233472 ; reserve the last 28KB for filesystem
board_upload.maximum_size = 247808 ; reserve the last 14KB for filesystem (reduced from 20KB in LittleFS.cpp)
board_level = extra
build_flags =
${stm32_base.build_flags}
variants/stm32/milesight_gs301/platformio.ini
+1 -1
View File
@@ -4,7 +4,7 @@
extends = stm32_base
board = wiscore_rak3172 ; Convenient choice as the same USART is used for programming/debug
board_level = extra
board_upload.maximum_size = 233472 ; reserve the last 28KB for filesystem
board_upload.maximum_size = 247808 ; reserve the last 14KB for filesystem (reduced from 20KB in LittleFS.cpp)
build_flags =
${stm32_base.build_flags}
-Ivariants/stm32/milesight_gs301
variants/stm32/rak3172/platformio.ini
+1 -1
View File
@@ -2,7 +2,7 @@
extends = stm32_base
board = wiscore_rak3172
board_level = pr
board_upload.maximum_size = 233472 ; reserve the last 28KB for filesystem
board_upload.maximum_size = 247808 ; reserve the last 14KB for filesystem (reduced from 20KB in LittleFS.cpp)
build_flags =
${stm32_base.build_flags}
-Ivariants/stm32/rak3172
variants/stm32/russell/platformio.ini
+1 -1
View File
@@ -8,7 +8,7 @@
extends = stm32_base
board = wiscore_rak3172
board_level = extra
board_upload.maximum_size = 233472 ; reserve the last 28KB for filesystem
board_upload.maximum_size = 247808 ; reserve the last 14KB for filesystem (reduced from 20KB in LittleFS.cpp)
build_flags =
${stm32_base.build_flags}
-Ivariants/stm32/russell
variants/stm32/wio-e5/platformio.ini
+1 -1
View File
@@ -2,7 +2,7 @@
extends = stm32_base
board = lora_e5_dev_board
board_level = pr
board_upload.maximum_size = 233472 ; reserve the last 28KB for filesystem
board_upload.maximum_size = 247808 ; reserve the last 14KB for filesystem (reduced from 20KB in LittleFS.cpp)
build_flags =
${stm32_base.build_flags}
-Ivariants/stm32/wio-e5