ElixirForge/firmware
1
0
Fork 0
mirror of https://github.com/alexhopeoconnor/firmware.git synced 2026-10-22 11:17:49 +10:00
Code Releases Activity

Merge branch 'develop' into thinknode-m9

Browse Source
This commit is contained in:
Manuel
2026-05-20 15:21:27 +02:00
parent d71a38078e 8d08077412
commit 7088470b5e
502 changed files with 33838 additions and 3796 deletions
Download Patch File Download Diff File Expand all files Collapse all files
variants/esp32/chatter2/platformio.ini
+1 -1
View File
@@ -12,4 +12,4 @@ build_flags =
lib_deps =
${esp32_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.19
lovyan03/LovyanGFX@1.2.21
variants/esp32/chatter2/variant.h
+1 -1
View File
@@ -70,7 +70,7 @@
// Battery
#define BATTERY_PIN 34 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO34_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_6
#define ADC_ATTENUATION \
ADC_ATTEN_DB_2_5 // 2_5-> 100mv-1250mv, 11-> 150mv-3100mv for ESP32
// ESP32-S2/C3/S3 are different
variants/esp32/diy/9m2ibr_aprs_lora_tracker/variant.h
+1 -1
View File
@@ -30,7 +30,7 @@
// Battery sense
#define BATTERY_PIN 35
#define ADC_MULTIPLIER 2.01 // 100k + 100k, and add 1% tolerance
#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_7
#define BATTERY_SENSE_RESOLUTION_BITS ADC_RESOLUTION
// SPI
variants/esp32/diy/dr-dev/variant.h
+1 -1
View File
@@ -3,7 +3,7 @@
#define I2C_SDA 4
#define I2C_SCL 5
#define BATTERY_PIN 34
#define ADC_CHANNEL ADC1_GPIO34_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_6
// GPS
#undef GPS_RX_PIN
variants/esp32/diy/hydra/variant.h
+1 -1
View File
@@ -11,7 +11,7 @@
// Note: On the ESP32 base version, gpio34-39 are input-only, and do not have internal pull-ups.
// If 39 is not being used for a button, it is suggested to remove the #define.
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_7
#define ADC_MULTIPLIER 1.85 // (R1 = 470k, R2 = 680k)
#define EXT_PWR_DETECT 4 // Pin to detect connected external power source for LILYGO® TTGO T-Energy T18 and other DIY boards
#define EXT_NOTIFY_OUT 12 // Overridden default pin to use for Ext Notify Module (#975).
variants/esp32/diy/v1/variant.h
+1 -1
View File
@@ -11,7 +11,7 @@
#define BUTTON_PIN 39 // The middle button GPIO on the T-Beam
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_7
#define ADC_MULTIPLIER 1.85 // (R1 = 470k, R2 = 680k)
#define EXT_PWR_DETECT 4 // Pin to detect connected external power source for LILYGO® TTGO T-Energy T18 and other DIY boards
#define EXT_NOTIFY_OUT 12 // Overridden default pin to use for Ext Notify Module (#975).
variants/esp32/esp32-common.ini
+258 -16
View File
@@ -4,8 +4,9 @@ extends = arduino_base
custom_esp32_kind =
custom_mtjson_part =
platform =
# renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
platformio/espressif32@6.13.0
# TODO renovate
https://github.com/pioarduino/platform-espressif32/releases/download/55.03.38-1/platform-espressif32.zip
; https://github.com/pioarduino/platform-espressif32.git#develop
platform_packages =
# renovate: datasource=custom.pio depName=platformio/tool-mklittlefs packageName=platformio/tool/tool-mklittlefs
platformio/tool-mklittlefs@1.203.210628
@@ -16,7 +17,7 @@ extra_scripts =
extra_scripts/esp32_extra.py
build_src_filter =
${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/nrf54l15/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
upload_speed = 921600
debug_init_break = tbreak setup
@@ -35,20 +36,18 @@ build_unflags =
-std=gnu++11
build_flags =
${arduino_base.build_flags}
-flto
-Wall
-Wextra
-Isrc/platform/esp32
-std=gnu++17
-DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
-DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
# DO NOT INCREASE THIS TO DEBUG. It appears to trigger a bug in ESP-IDF
# Bluetooth stack with Pixel 8 Android devices:
# https://github.com/espressif/esp-idf/issues/18126#issuecomment-4286197744
# Once the bug is resolved, we can remove this warning.
-DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_INFO
-DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-DAXP_DEBUG_PORT=Serial
-DCONFIG_BT_NIMBLE_ENABLED
-DCONFIG_BT_NIMBLE_MAX_BONDS=6 # default is 3
-DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
-DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-DSERIAL_BUFFER_SIZE=4096
-DSERIAL_HAS_ON_RECEIVE
@@ -62,16 +61,13 @@ build_flags =
lib_deps =
${arduino_base.lib_deps}
${networking_base.lib_deps}
${networking_extra.lib_deps}
${environmental_base.lib_deps}
${environmental_extra.lib_deps}
${radiolib_base.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
https://github.com/meshtastic/esp32_https_server/archive/0c71f380390ad483ff134ad938e07f6cf1226c5b.zip
# renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
h2zero/NimBLE-Arduino@1.4.3
# renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
# TODO renovate
https://github.com/mverch67/libpax/archive/6f52ee989301cdabaeef00bcbf93bff55708ce2f.zip
# renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
lewisxhe/XPowersLib@0.3.3
# renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
@@ -79,7 +75,30 @@ lib_deps =
lib_ignore =
segger_rtt
ESP32 BLE Arduino
; ESP32 BLE Arduino
; BLE
; Ignore select Bluetooth libs
NimBLE-Arduino
BluetoothSerial
SimpleBLE
WiFiProv
ArduinoOTA
; Ignore pioarduino esp32 libs we don't use
ESP_I2S
ESP_NOW
ESP_SR
Insights
Matter
OpenThread
RainMaker
;SPIFFS
USB
;NetworkClientSecure
Zigbee
Micro-RTSP
; testing below
mqtt
esp-mqtt
; leave this commented out to avoid breaking Windows
;upload_port = /dev/ttyUSB0
@@ -92,3 +111,226 @@ lib_ignore =
; customize the partition table
; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
board_build.partitions = partition-table.csv
custom_component_remove =
espressif/esp_hosted
espressif/esp_wifi_remote
espressif/esp_modem
espressif/esp-dsp
espressif/esp32-camera
espressif/libsodium
espressif/esp-modbus
espressif/qrcode
espressif/esp_insights
espressif/esp_diag_data_store
espressif/esp_diagnostics
espressif/esp_rainmaker
espressif/rmaker_common
espressif/network_provisioning
chmorgan/esp-libhelix-mp3
espressif/esp-tflite-micro
espressif/esp-sr
espressif/esp_matter
espressif/esp-zboss-lib
espressif/esp-zigbee-lib
espressif/mqtt
custom_sdkconfig =
; CONFIG_LOG_DEFAULT_LEVEL=4
; CONFIG_LOG_MAXIMUM_LEVEL=4
'# CONFIG_BT_NIMBLE_LOG_LEVEL_INFO is not set'
CONFIG_BT_NIMBLE_LOG_LEVEL_ERROR=y
CONFIG_LOG_COLORS=y
CONFIG_ARDUHAL_LOG_COLORS=y
CONFIG_BOOTLOADER_LOG_LEVEL_NONE=y
CONFIG_IDF_EXPERIMENTAL_FEATURES=y
;
; Compiler options
;
CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=n
CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE=y
CONFIG_COMPILER_CXX_EXCEPTIONS=n
CONFIG_COMPILER_STACK_CHECK_MODE_NORM=n
CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
CONFIG_COMPILER_DISABLE_GCC12_WARNINGS=y
CONFIG_COMPILER_DISABLE_GCC13_WARNINGS=y
CONFIG_COMPILER_DISABLE_GCC14_WARNINGS=y
CONFIG_COMPILER_ORPHAN_SECTIONS_WARNING=n
CONFIG_COMPILER_ORPHAN_SECTIONS_PLACE=y
CONFIG_ESP_GDBSTUB_ENABLED=n
CONFIG_ESP_TASK_WDT_INIT=n
CONFIG_NEWLIB_NANO_FORMAT=y
; LIBC_NEWLIB_NANO_FORMAT is enabled via 'esp32_extra.py' to allow float support
CONFIG_ESP_COREDUMP_ENABLE=n
CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH=n
CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y
CONFIG_ESP32_ENABLE_COREDUMP=n
CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS=n
CONFIG_FREERTOS_USE_STATS_FORMATTING_FUNCTIONS=n
CONFIG_FREERTOS_USE_TRACE_FACILITY=n
CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH=y
CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH=y
CONFIG_RINGBUF_PLACE_FUNCTIONS_INTO_FLASH=y
CONFIG_ESP_SYSTEM_ESP32_SRAM1_REGION_AS_IRAM=y
CONFIG_ESP_WIFI_IRAM_OPT=n
CONFIG_ESP32_WIFI_RX_IRAM_OPT=n
CONFIG_SPIRAM_CACHE_LIBCHAR_IN_IRAM=n
CONFIG_SPIRAM_CACHE_LIBSTR_IN_IRAM=n
CONFIG_SPIRAM_CACHE_LIBMISC_IN_IRAM=n
CONFIG_SPIRAM_CACHE_LIBTIME_IN_IRAM=n
CONFIG_UNITY_ENABLE_FLOAT=n
CONFIG_UNITY_ENABLE_DOUBLE=n
CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=n
CONFIG_SUPPORT_TERMIOS=n
CONFIG_VFS_SUPPORT_TERMIOS=n
CONFIG_VFS_SUPPORT_SELECT=n
CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=n
CONFIG_WS_TRANSPORT=n
CONFIG_PPP_SUPPORT=n
CONFIG_NETWORK_PROV_NETWORK_TYPE_WIFI=n
; CONFIG_LWIP_DHCPS=n
CONFIG_LWIP_PPP_SUPPORT=n
CONFIG_LWIP_IP_FORWARD=n
CONFIG_LWIP_IPV4_NAPT=n
;
; MBEDTLS
;
CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN=8192
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=n
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN=y
; Switch to custom CA bundle (for Meshtastic MQTT/etc) in the future
; https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/api-reference/kconfig-reference.html#certificate-bundle-configuration
; CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE=y
; CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE_PATH=""
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS=1
; #shame
CONFIG_MBEDTLS_ALLOW_WEAK_CERTIFICATE_VERIFICATION=y
CONFIG_MBEDTLS_SSL_RENEGOTIATION=n
CONFIG_MBEDTLS_SSL_PROTO_DTLS=n
CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=n
CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=n
CONFIG_MBEDTLS_PKCS7_C=n
CONFIG_MBEDTLS_CAMELLIA_C=n
CONFIG_MBEDTLS_CCM_C=n
CONFIG_MBEDTLS_CMAC_C=n
CONFIG_MBEDTLS_SHA512_C=n
CONFIG_MBEDTLS_X509_CRL_PARSE_C=n
CONFIG_MBEDTLS_X509_CSR_PARSE_C=n
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_PSK=n
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=n
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=n
CONFIG_MBEDTLS_KEY_EXCHANGE_ECJPAKE=n
CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=n
CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=n
CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=n
CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=n
CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=n
CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=n
CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=n
CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=n
CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=n
CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=n
CONFIG_MDNS_ENABLE_CONSOLE_CLI=n
CONFIG_MDNS_PREDEF_NETIF_AP=n
; CONFIG_ESP_WIFI_SOFTAP_SUPPORT=n
CONFIG_ESP_WIFI_ENTERPRISE_SUPPORT=n
CONFIG_ESP_WIFI_ENABLE_WPA3_SAE=n
CONFIG_ESP_WIFI_ENABLE_WPA3_OWE_STA=n
CONFIG_ESP_WIFI_ENABLE_SAE_H2E=n
CONFIG_OPENTHREAD_ENABLED=n
CONFIG_ZB_ENABLED=n
CONFIG_IEEE802154_ENABLED=n
CONFIG_ESP_INSIGHTS_ENABLED=n
CONFIG_HTTPD_WS_SUPPORT=n
CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=n
CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH=n
; using esp-idf5-https_server library instead, for now?
CONFIG_ESP_HTTPS_SERVER_ENABLE=n
;
; Builtin ESP-MQTT, we don't use this (yet?)
;
CONFIG_MQTT_TRANSPORT_SSL=n
CONFIG_MQTT_TRANSPORT_WEBSOCKET=n
CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=n
CONFIG_MQTT_PROTOCOL_311=n
;
; Ethernet
; Disabled in esp32_common, re-enable on variants that need it
;
CONFIG_ETH_ENABLED=n
CONFIG_ARDUINO_SELECTIVE_Ethernet=n
;
; Bluetooth
;
CONFIG_BLE_MESH=n
CONFIG_BT_ENABLED=y
CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
CONFIG_BT_BLUEDROID_ENABLED=n
CONFIG_BT_NIMBLE_ENABLED=y
CONFIG_BT_NIMBLE_NVS_PERSIST=y
CONFIG_BT_NIMBLE_ROLE_CENTRAL=n
CONFIG_BT_NIMBLE_ROLE_OBSERVER=n
CONFIG_BT_CONTROLLER_ENABLED=y
CONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
CONFIG_BT_NIMBLE_MAX_CCCDS=20
CONFIG_BT_NIMBLE_MAX_BONDS=6
CONFIG_BT_NIMBLE_ENABLE_PERIODIC_SYNC=n
CONFIG_BT_NIMBLE_ENABLE_PERIODIC_ADV=n
CONFIG_BT_NIMBLE_EXT_SCAN=n
CONFIG_BT_NIMBLE_EXT_ADV=n
CONFIG_BT_NIMBLE_PERIODIC_ADV_SYNC_TRANSFER=n
CONFIG_BT_NIMBLE_LL_CFG_FEAT_LE_2M_PHY=n
CONFIG_BT_NIMBLE_BLUFI_ENABLE=n
CONFIG_BT_NIMBLE_PROX_SERVICE=n
CONFIG_BT_NIMBLE_ANS_SERVICE=n
CONFIG_BT_NIMBLE_CTS_SERVICE=n
CONFIG_BT_NIMBLE_HTP_SERVICE=n
CONFIG_BT_NIMBLE_IPSS_SERVICE=n
CONFIG_BT_NIMBLE_TPS_SERVICE=n
CONFIG_BT_NIMBLE_IAS_SERVICE=n
CONFIG_BT_NIMBLE_LLS_SERVICE=n
CONFIG_BT_NIMBLE_SPS_SERVICE=y
CONFIG_BT_NIMBLE_HR_SERVICE=n
CONFIG_BT_NIMBLE_HID_SERVICE=n
CONFIG_BT_NIMBLE_BAS_SERVICE=n
CONFIG_BT_NIMBLE_DIS_SERVICE=n
;
; Arduino selective compilation
; Disable unused Arduino libraries to save space
;
CONFIG_ARDUINO_SELECTIVE_COMPILATION=y
CONFIG_ARDUINO_SELECTIVE_SPI=y
CONFIG_ARDUINO_SELECTIVE_Wire=y
CONFIG_ARDUINO_SELECTIVE_ESP_SR=n
CONFIG_ARDUINO_SELECTIVE_EEPROM=y
CONFIG_ARDUINO_SELECTIVE_Preferences=y
CONFIG_ARDUINO_SELECTIVE_Ticker=y
CONFIG_ARDUINO_SELECTIVE_Update=y
CONFIG_ARDUINO_SELECTIVE_Zigbee=n
CONFIG_ARDUINO_SELECTIVE_FS=y
CONFIG_ARDUINO_SELECTIVE_SD=y
CONFIG_ARDUINO_SELECTIVE_SD_MMC=y
CONFIG_ARDUINO_SELECTIVE_SPIFFS=y
CONFIG_ARDUINO_SELECTIVE_FFat=n
CONFIG_ARDUINO_SELECTIVE_LittleFS=y
CONFIG_ARDUINO_SELECTIVE_Network=y
; CONFIG_ARDUINO_SELECTIVE_Ethernet=n
CONFIG_ARDUINO_SELECTIVE_PPP=n
CONFIG_ARDUINO_SELECTIVE_Hash=y
CONFIG_ARDUINO_SELECTIVE_ArduinoOTA=n
CONFIG_ARDUINO_SELECTIVE_AsyncUDP=y
CONFIG_ARDUINO_SELECTIVE_DNSServer=n
CONFIG_ARDUINO_SELECTIVE_ESPmDNS=y
CONFIG_ARDUINO_SELECTIVE_HTTPClient=n
CONFIG_ARDUINO_SELECTIVE_Matter=n
CONFIG_ARDUINO_SELECTIVE_NetBIOS=n
CONFIG_ARDUINO_SELECTIVE_WebServer=n
CONFIG_ARDUINO_SELECTIVE_WiFi=y
CONFIG_ARDUINO_SELECTIVE_NetworkClientSecure=y
CONFIG_ARDUINO_SELECTIVE_WiFiProv=n
CONFIG_ARDUINO_SELECTIVE_BLE=y
CONFIG_ARDUINO_SELECTIVE_BluetoothSerial=n
CONFIG_ARDUINO_SELECTIVE_SimpleBLE=n
CONFIG_ARDUINO_SELECTIVE_RainMaker=n
CONFIG_ARDUINO_SELECTIVE_OpenThread=n
CONFIG_ARDUINO_SELECTIVE_Insights=n
variants/esp32/esp32.ini
+29 -2
View File
@@ -11,12 +11,39 @@ build_src_filter =
build_flags =
${esp32_common.build_flags}
-mtext-section-literals
-D ESP32_FORCE_IRAM_MEMSET
-Wl,--wrap=memset
-Wl,--wrap=memcpy
-DMESHTASTIC_EXCLUDE_AUDIO=1
-DMESHTASTIC_EXCLUDE_ACCELEROMETER=1
-DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
-DMESHTASTIC_EXCLUDE_WEBSERVER=1
-DMESHTASTIC_EXCLUDE_RANGETEST=1
; HACK HACK HACK this is just a proof of concept ESP32+NimBLE but these
; includes need to be done properly somehow
-I${platformio.packages_dir}/framework-espidf/components/bt/host/nimble/nimble/nimble/host/include
-I${platformio.packages_dir}/framework-espidf/components/bt/host/nimble/nimble/nimble/include
-I${platformio.packages_dir}/framework-espidf/components/bt/host/nimble/nimble/porting/nimble/include
-I${platformio.packages_dir}/framework-espidf/components/bt/host/nimble/port/include
-I${platformio.packages_dir}/framework-espidf/components/bt/host/nimble/nimble/porting/npl/freertos/include
-I${platformio.packages_dir}/framework-espidf/components/bt/host/nimble/nimble/nimble/transport/include
-I${platformio.packages_dir}/framework-espidf/components/bt/host/nimble/nimble/nimble/host/services/gap/include
-I${platformio.packages_dir}/framework-espidf/components/bt/host/nimble/esp-hci/include
-I${platformio.packages_dir}/framework-espidf/components/bt/host/nimble/nimble/nimble/host/services/gatt/include
-I${platformio.packages_dir}/framework-espidf/components/bt/host/nimble/nimble/nimble/host/util/include
custom_sdkconfig =
${esp32_common.custom_sdkconfig}
CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
'# CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY is not set'
'# CONFIG_BTDM_CTRL_MODE_BTDM is not set'
'# CONFIG_BT_BLUEDROID_ENABLED is not set'
CONFIG_BT_NIMBLE_ENABLED=y
CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP=y
; Override lib_deps to use environmental_extra_no_bsec instead of environmental_extra
; BSEC library uses ~3.5KB DRAM which causes overflow on original ESP32 targets
lib_deps =
${arduino_base.lib_deps}
${networking_base.lib_deps}
@@ -24,8 +51,8 @@ lib_deps =
${radiolib_base.lib_deps}
${environmental_base.lib_deps}
${environmental_extra_no_bsec.lib_deps}
# renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
h2zero/NimBLE-Arduino@1.4.3
# TODO renovate
https://github.com/mverch67/libpax/archive/6f52ee989301cdabaeef00bcbf93bff55708ce2f.zip
# renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
lewisxhe/XPowersLib@0.3.3
# renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
variants/esp32/heltec_wsl_v2.1/variant.h
+1 -1
View File
@@ -12,7 +12,7 @@
#define ADC_CTRL 21
#define ADC_CTRL_ENABLED LOW
#define BATTERY_PIN 37 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_CHANNEL_1
#define ADC_CHANNEL ADC_CHANNEL_1
// ratio of voltage divider = 3.20 (R1=100k, R2=220k)
#define ADC_MULTIPLIER 3.2
variants/esp32/m5stack_core/platformio.ini
+1 -1
View File
@@ -35,4 +35,4 @@ lib_ignore =
lib_deps =
${esp32_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.19
lovyan03/LovyanGFX@1.2.21
variants/esp32/m5stack_coreink/platformio.ini
+1 -1
View File
@@ -19,7 +19,7 @@ build_flags =
lib_deps =
${esp32_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
# renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
lewisxhe/SensorLib@0.3.4
lib_ignore =
variants/esp32/m5stack_coreink/variant.h
+1 -1
View File
@@ -92,7 +92,7 @@
#define PIN_EINK_MOSI 23 // EPD_MOSI
#define BATTERY_PIN 35
#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_7
// https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/schematic/Core/m5paper/M5_PAPER_SCH.pdf
// https://github.com/m5stack/M5Core-Ink/blob/master/examples/Basics/FactoryTest/FactoryTest.ino#L58
// VBAT
variants/esp32/nano-g1-explorer/variant.h
+1 -1
View File
@@ -33,7 +33,7 @@
#endif
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_7
#define BATTERY_SENSE_SAMPLES 15 // Set the number of samples, It has an effect of increasing sensitivity.
#define ADC_MULTIPLIER 2
variants/esp32/radiomaster_900_bandit/platformio.ini
+1 -1
View File
@@ -7,7 +7,7 @@ build_flags =
-DVTABLES_IN_FLASH=1
-DCONFIG_DISABLE_HAL_LOCKS=1
-DHAS_STK8XXX=1
-O2
; -O2
-I variants/esp32/radiomaster_900_bandit
board_build.f_cpu = 240000000L
upload_protocol = esptool
variants/esp32/rak11200/variant.h
+1 -1
View File
@@ -47,7 +47,7 @@ static const uint8_t SCK = 33;
#define PIN_VBAT WB_A0
#define BATTERY_PIN PIN_VBAT
#define ADC_CHANNEL ADC1_GPIO36_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_0
// https://docs.rakwireless.com/Product-Categories/WisBlock/RAK13300/
variants/esp32/station-g1/variant.h
+1 -1
View File
@@ -32,7 +32,7 @@
#endif
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_7
#define BATTERY_SENSE_SAMPLES 30 // Set the number of samples, It has an effect of increasing sensitivity.
#define ADC_MULTIPLIER 6.45
#define CELL_TYPE_LION // same curve for liion/lipo
variants/esp32/tbeam/platformio.ini
+1
View File
@@ -16,6 +16,7 @@ board_check = true
build_flags = ${esp32_base.build_flags}
-D TBEAM_V10
-I variants/esp32/tbeam
upload_speed = 921600
[env:tbeam-displayshield]
variants/esp32/tbeam/variant.h
+4 -3
View File
@@ -35,9 +35,10 @@
// code)
#endif
// Leave undefined to disable our PMU IRQ handler. DO NOT ENABLE THIS because the pmuirq can cause sperious interrupts
// and waking from light sleep
// #define PMU_IRQ 35
// Voiding more warranties.
#define PMU_IRQ 35
#define PMU_POWER_BUTTON_IS_CANCEL // maps a short click of the power button to a cancel action (turning off the screen)
#define HAS_AXP192
#define GPS_UBLOX
#define GPS_RX_PIN 34
variants/esp32/tbeam_v07/variant.h
+1 -1
View File
@@ -6,7 +6,7 @@
#define BUTTON_PIN 39
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_7
#define USE_RF95
#define LORA_DIO0 26 // a No connect on the SX1262 module
variants/esp32/tlora_v1_3/variant.h
+1 -1
View File
@@ -1,5 +1,5 @@
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_7
#define I2C_SDA 21 // I2C pins for this board
#define I2C_SCL 22
variants/esp32/tlora_v2/variant.h
+1 -1
View File
@@ -1,5 +1,5 @@
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_7
#define I2C_SDA 21 // I2C pins for this board
#define I2C_SCL 22
variants/esp32/tlora_v2_1_16/variant.h
+1 -1
View File
@@ -1,5 +1,5 @@
#define BATTERY_PIN 35
#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_7
#define BATTERY_SENSE_SAMPLES 30
// ratio of voltage divider = 2.0 (R42=100k, R43=100k)
variants/esp32/tlora_v2_1_18/variant.h
+1 -1
View File
@@ -1,7 +1,7 @@
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
// ratio of voltage divider = 2.0 (R42=100k, R43=100k)
#define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_7
#define I2C_SDA 21 // I2C pins for this board
#define I2C_SCL 22
variants/esp32/trackerd/variant.h
+1 -1
View File
@@ -22,7 +22,7 @@
#undef BAT_MEASURE_ADC_UNIT
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_MULTIPLIER 1.34 // tracked resistance divider is 100k+470k, so it can not fillfull well on esp32 adc
#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_7
#define ADC_ATTENUATION ADC_ATTEN_DB_12 // lower dB for high resistance voltage divider
#undef GPS_RX_PIN
variants/esp32/wiphone/platformio.ini
+1 -1
View File
@@ -11,7 +11,7 @@ build_flags =
lib_deps =
${esp32_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.19
lovyan03/LovyanGFX@1.2.21
# renovate: datasource=custom.pio depName=SX1509 IO Expander packageName=sparkfun/library/SX1509 IO Expander
sparkfun/SX1509 IO Expander@3.0.6
# renovate: datasource=custom.pio depName=APA102 packageName=pololu/library/APA102
variants/esp32c3/esp32c3.ini
+13
View File
@@ -5,6 +5,19 @@ custom_esp32_kind = esp32c3
monitor_speed = 115200
monitor_filters = esp32_c3_exception_decoder
build_flags =
${esp32_common.build_flags}
; Linker script to align text.handler_execute section to 4 bytes
-Wl,-Tsrc/platform/esp32/align-text.handler_execute-4.ld
custom_sdkconfig =
${esp32_common.custom_sdkconfig}
; ESP32c3 doesn't support SD_MMC
CONFIG_ARDUINO_SELECTIVE_SD_MMC=n
; CONFIG_BT_NIMBLE_EXT_ADV=y
; CONFIG_BT_NIMBLE_TRANSPORT_EVT_SIZE=257
; CONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
lib_deps =
${esp32_common.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
variants/esp32c6/esp32c6.ini
+22 -38
View File
@@ -1,50 +1,34 @@
[esp32c6_base]
extends = esp32_common
platform =
# Do not renovate until we have switched to pioarduino tagged builds
https://github.com/Jason2866/platform-espressif32/archive/22faa566df8c789000f8136cd8d0aca49617af55.zip
platform_packages =
# HACK: This release was automatically removed upstream
framework-arduinoespressif32 @ https://github.com/vidplace7/platform-espressif32/releases/download/meshtastic-esp32c6/framework-arduinoespressif32-all-release_v5.1-124d64e.zip
build_flags =
${arduino_base.build_flags}
-Wall
-Wextra
-Isrc/platform/esp32
-DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-DSERIAL_BUFFER_SIZE=4096
-DLIBPAX_ARDUINO
-DLIBPAX_WIFI
-DLIBPAX_BLE
-DMESHTASTIC_EXCLUDE_WEBSERVER
;-DDEBUG_HEAP
; TEMP
-DHAS_BLUETOOTH=0
-DMESHTASTIC_EXCLUDE_PAXCOUNTER
-DMESHTASTIC_EXCLUDE_BLUETOOTH
custom_esp32_kind = esp32c6
lib_deps =
${arduino_base.lib_deps}
${networking_base.lib_deps}
${environmental_base.lib_deps}
${environmental_extra.lib_deps}
${radiolib_base.lib_deps}
# renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
lewisxhe/XPowersLib@0.3.3
# renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
# renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
rweather/Crypto@0.4.0
build_flags =
${esp32_common.build_flags}
; Linker script to align text.handler_execute section to 4 bytes
-Wl,-Tsrc/platform/esp32/align-text.handler_execute-4.ld
; Exclude Paxcounter, it uses 'esp_vhci_host_send_packet' whch is not available on ESP32-C6
; https://github.com/espressif/arduino-esp32/issues/11716
-DMESHTASTIC_EXCLUDE_PAXCOUNTER
build_src_filter =
${esp32_common.build_src_filter} -<mesh/http>
${esp32_common.build_src_filter}
monitor_speed = 460800
monitor_filters = esp32_c3_exception_decoder
custom_sdkconfig =
${esp32_common.custom_sdkconfig}
; ESP32c6 doesn't support SD_MMC
CONFIG_ARDUINO_SELECTIVE_SD_MMC=n
; CONFIG_BT_NIMBLE_EXT_ADV=y
; CONFIG_BT_NIMBLE_TRANSPORT_EVT_SIZE=257
; CONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
lib_ignore =
${esp32_common.lib_ignore}
NonBlockingRTTTL
NimBLE-Arduino
libpax
lib_deps =
${esp32_common.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
variants/esp32c6/m5stack_unitc6l/platformio.ini
-16
View File
@@ -17,28 +17,12 @@ board_build.partitions = default_16MB.csv
;Normal method
upload_protocol = esptool
;upload_port = /dev/ttyACM2
build_unflags =
-D HAS_BLUETOOTH
-D MESHTASTIC_EXCLUDE_BLUETOOTH
-D HAS_WIFI
lib_deps =
${esp32c6_base.lib_deps}
# renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
h2zero/NimBLE-Arduino@2.3.7
build_flags =
${esp32c6_base.build_flags}
-D M5STACK_UNITC6L
-I variants/esp32c6/m5stack_unitc6l
-DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
-DARDUINO_USB_CDC_ON_BOOT=1
-DARDUINO_USB_MODE=1
-D HAS_BLUETOOTH=1
-DCONFIG_BT_NIMBLE_EXT_ADV=1
-DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
-D NIMBLE_TWO
monitor_speed=115200
lib_ignore =
NonBlockingRTTTL
libpax
build_src_filter =
${esp32c6_base.build_src_filter} +<../variants/esp32c6/m5stack_unitc6l>
variants/esp32c6/m5stack_unitc6l/variant.cpp
+11 -9
View File
@@ -52,23 +52,25 @@ void c6l_init()
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_read_byte(PI4IO_M_ADDR, PI4IO_REG_CHIP_RESET, &in_data);
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_IO_DIR, 0b11000000); // 0: input 1: output
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_IO_DIR, 0b11100000); // P5,P6,P7 as outputs
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_OUT_H_IM, 0b00111100); // 使用到的引脚关闭High-Impedance
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_OUT_H_IM, 0b00011100); // High-Impedance
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_PULL_SEL, 0b11000011); // pull up/down select, 0 down, 1 up
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_PULL_SEL, 0b11100011); // pull up/down select, 0 down, 1 up
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_PULL_EN, 0b11000011); // pull up/down enable, 0 disable, 1 enable
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_PULL_EN, 0b11100011); // pull up/down enable, 0 disable, 1 enable
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_IN_DEF_STA, 0b00000011); // P0 P1 默认高电平, 按键按下触发中断
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_IN_DEF_STA, 0b00000011); // P0 P1 default to high level; button press triggers the interrupt
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_INT_MASK, 0b11111100); // P0 P1 中断使能 0 enable, 1 disable
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_INT_MASK, 0b11111100); // P0 P1 interrupts enabled (0 = enable, 1 = disable)
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_OUT_SET, 0b10000000); // 默认输出为0
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_OUT_SET, 0b10000000); // default output is 0
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_read_byte(PI4IO_M_ADDR, PI4IO_REG_IRQ_STA, &in_data); // read IRQ_STA to clear the flag
vTaskDelay(10 / portTICK_PERIOD_MS);
i2c_read_byte(PI4IO_M_ADDR, PI4IO_REG_IRQ_STA, &in_data); // 读取IRQ_STA清除标志
i2c_read_byte(PI4IO_M_ADDR, PI4IO_REG_OUT_SET, &in_data);
setbit(in_data, 6); // HIGH
setbit(in_data, 6); // enable SX_ANT_SW
setbit(in_data, 5); // enable SX_LNA_EN
i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_OUT_SET, in_data);
}
variants/esp32c6/m5stack_unitc6l/variant.h
+3
View File
@@ -48,6 +48,9 @@ void c6l_init();
#define SSD1306_RESET 15
// #define OLED_DG 1
#endif
// Tiny OLED panel — opts into compile-time layout/font/feature substitutions
// gated on OLED_TINY across the graphics stack.
#define OLED_TINY
#define SCREEN_TRANSITION_FRAMERATE 10
#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
variants/esp32c6/tlora_c6/platformio.ini
+8
View File
@@ -8,3 +8,11 @@ build_flags =
-I variants/esp32c6/tlora_c6
-DARDUINO_USB_CDC_ON_BOOT=1
-DARDUINO_USB_MODE=1
; Disable screen + audio.
; ESP32-C6 with 4MB flash is TIGHT on space.
-DMESHTASTIC_EXCLUDE_SCREEN=1
-DMESHTASTIC_EXCLUDE_AUDIO=1
lib_ignore =
${esp32c6_base.lib_ignore}
ESP32 Codec2
variants/esp32p4/esp32p4.ini
+110
View File
@@ -0,0 +1,110 @@
[esp32p4_base]
extends = esp32_common
custom_esp32_kind = esp32p4
board_build.mcu = esp32p4
build_unflags=
-DHAS_UDP_MULTICAST=1
build_flags =
${esp32_common.build_flags}
-DMESHTASTIC_EXCLUDE_WIFI=1 ; TODO
-DMESHTASTIC_EXCLUDE_MQTT=1
-DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
build_src_filter =
${esp32_common.build_src_filter} -<libpax/> -<platform/stm32wl> -<nimble> -<mesh/http/> -<platform/rp2xx0> -<mesh/raspihttp> -<serialization/>
extra_scripts =
${esp32_common.extra_scripts}
extra_scripts/ld_response_file.py
; Override esp32_common component pruning: keep esp_hosted + esp_wifi_remote for P4 hosted BT
custom_component_remove =
espressif/esp_modem
espressif/esp-dsp
espressif/esp32-camera
espressif/libsodium
espressif/esp-modbus
espressif/qrcode
espressif/esp_insights
espressif/esp_diag_data_store
espressif/esp_diagnostics
espressif/esp_rainmaker
espressif/rmaker_common
espressif/network_provisioning
chmorgan/esp-libhelix-mp3
espressif/esp-tflite-micro
espressif/esp-sr
espressif/esp_matter
espressif/esp-zboss-lib
espressif/esp-zigbee-lib
espressif/mqtt
custom_sdkconfig =
${esp32_common.custom_sdkconfig}
CONFIG_ARDUINO_SELECTIVE_SD_MMC=y
CONFIG_BT_CONTROLLER_DISABLED=y
CONFIG_ESP_WIFI_REMOTE_ENABLED=y
# esp_hosted core
CONFIG_ESP_HOSTED_ENABLED=y
# Board: custom (not Espressif EV board)
CONFIG_ESP_HOSTED_P4_DEV_BOARD_NONE=y
# Delay after C6 reset to allow boot (e.g. old v2.3.0 may be slow)
CONFIG_ESP_HOSTED_SDIO_RESET_DELAY_MS=1500
CONFIG_ESP_HOSTED_SDIO_OPTIMIZATION_RX_STREAMING_MODE=y
CONFIG_ESP_HOSTED_SDIO_HOST_INTERFACE=y
CONFIG_ESP_HOSTED_IDF_SLAVE_TARGET="esp32c6"
CONFIG_ESP_HOSTED_CP_TARGET_ESP32C6=y
CONFIG_ESP_HOSTED_CP_TARGET_ESP32H2=n
CONFIG_ESP_HOSTED_PRIV_SDIO_OPTION=y
CONFIG_ESP_HOSTED_SPI_HOST_INTERFACE=n
CONFIG_ESP_HOSTED_TRANSPORT_SDIO=y
CONFIG_ESP_HOSTED_ENABLE_NIMBLE=y
CONFIG_ESP_HOSTED_ENABLE_BT_NIMBLE=y
CONFIG_ESP_HOSTED_NIMBLE_HCI_VHCI=y
CONFIG_ESP_HOSTED_ENABLE_PEER_DATA_TRANSFER=y
CONFIG_ESP_HOSTED_MAX_CUSTOM_MSG_HANDLERS=3
# OTA method: LittleFS
CONFIG_OTA_METHOD_LITTLEFS=y
# Skip version check — we force OTA regardless
# CONFIG_OTA_VERSION_CHECK_HOST_SLAVE is not set
# CONFIG_OTA_VERSION_CHECK_SLAVEFW_SLAVE is not set
# RX streaming mode
CONFIG_ESP_HOSTED_SLAVE_RESET_ON_EVERY_HOST_BOOTUP=y
;CONFIG_ESP_HOSTED_SLAVE_RESET_ONLY_IF_NECESSARY=y
# SOC_LCD (MUI / lovyanGFX)
CONFIG_SOC_LCD_I80_SUPPORTED=y
CONFIG_SOC_LCD_RGB_SUPPORTED=y
CONFIG_SOC_MIPI_DSI_SUPPORTED=y
# stack dump
CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT=y ; remove for production version
;CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y; for production version
;CONFIG_ESP_SYSTEM_PANIC_GDBSTUB=y ; for target debugging
# Logger: verbose for experiment
CONFIG_LOG_DEFAULT_LEVEL_INFO=y
CONFIG_LOG_MAXIMUM_LEVEL_DEBUG=y
lib_ignore =
${esp32_common.lib_ignore}
libpax
esp8266-oled-ssd1306
bsec2
esp32_idf5_https_server
esp_driver_cam
esp_http_server
; Override lib_deps to exclude environmental_extras
lib_deps =
${arduino_base.lib_deps}
${networking_base.lib_deps}
${networking_extra.lib_deps}
${environmental_base.lib_deps}
${radiolib_base.lib_deps}
# renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
rweather/Crypto@0.4.0
# renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
variants/esp32s2/esp32s2.ini
+9 -4
View File
@@ -12,13 +12,18 @@ build_flags =
-DHAS_BLUETOOTH=0
-DMESHTASTIC_EXCLUDE_PAXCOUNTER
-DMESHTASTIC_EXCLUDE_BLUETOOTH
-mtext-section-literals
lib_deps =
${esp32_common.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
custom_sdkconfig =
${esp32_common.custom_sdkconfig}
lib_ignore =
${esp32_common.lib_ignore}
NimBLE-Arduino
libpax
lib_deps =
${esp32_common.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
variants/esp32s3/CDEBYTE_EoRa-Hub/variant.h
+1 -1
View File
@@ -7,7 +7,7 @@
#define BUTTON_PIN 0 // BOOT button
#define BATTERY_PIN 1
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_0
#define ADC_MULTIPLIER 103.0 // Calibrated value
#define ADC_ATTENUATION ADC_ATTEN_DB_0
#define ADC_CTRL 37
variants/esp32s3/CDEBYTE_EoRa-S3/variant.h
+1 -1
View File
@@ -18,7 +18,7 @@
// Battery voltage monitoring - TODO: test, currently untested, copied from T3S3 variant
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_0
#define ADC_MULTIPLIER \
2.11 // ratio of voltage divider = 2.0 (R10=1M, R13=1M), plus some undervoltage correction - TODO: this was carried over from
// the T3S3, test to see if the undervoltage correction is needed.
variants/esp32s3/ELECROW-ThinkNode-G3/pins_arduino.h
+26
View File
@@ -0,0 +1,26 @@
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include <stdint.h>
#define USB_VID 0x303a
#define USB_PID 0x1001
// The default Wire will be mapped to PMU and RTC
static const uint8_t SDA = 17;
static const uint8_t SCL = 18;
// Default SPI will be mapped to Radio
static const uint8_t SS = 39;
static const uint8_t MOSI = 40;
static const uint8_t MISO = 41;
static const uint8_t SCK = 42;
// #define SPI_MOSI (11)
// #define SPI_SCK (10)
// #define SPI_MISO (9)
// #define SPI_CS (12)
// #define SDCARD_CS SPI_CS
#endif /* Pins_Arduino_h */
variants/esp32s3/ELECROW-ThinkNode-G3/platformio.ini
+29
View File
@@ -0,0 +1,29 @@
[env:thinknode_g3]
extends = esp32s3_base
board = ESP32-S3-WROOM-1-N4
board_build.psram_type = opi
build_flags =
${esp32s3_base.build_flags}
-D HAS_UDP_MULTICAST=1
-D BOARD_HAS_PSRAM
-D PRIVATE_HW
-I variants/esp32s3/ELECROW-ThinkNode-G3
-mfix-esp32-psram-cache-issue
custom_sdkconfig =
${esp32s3_base.custom_sdkconfig}
CONFIG_ETH_ENABLED=y
CONFIG_ARDUINO_SELECTIVE_Ethernet=y
lib_ignore =
Ethernet
build_src_filter =
${esp32s3_base.build_src_filter}
+<../variants/esp32s3/ELECROW-ThinkNode-G3/*>
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=github-tags depName=ESP32-CH390 packageName=meshtastic/ESP32-CH390
https://github.com/meshtastic/ESP32-CH390/archive/refs/tags/v1.0.1.zip
variants/esp32s3/ELECROW-ThinkNode-G3/variant.h
+38
View File
@@ -0,0 +1,38 @@
#define HAS_GPS 0
#define HAS_WIRE 0
#define I2C_NO_RESCAN
#define WIFI_LED 5
#define WIFI_STATE_ON 0
#define LED_PIN 6
#define LED_STATE_ON 0
#define BUTTON_PIN 4
#define LORA_SCK 42
#define LORA_MISO 41
#define LORA_MOSI 40
#define LORA_CS 39
#define LORA_RESET 21
#define USE_SX1262
#define SX126X_CS LORA_CS
#define SX126X_DIO1 15
#define SX126X_BUSY 47
#define SX126X_RESET LORA_RESET
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define PIN_POWER_EN 45
#define HAS_ETHERNET 1
#define USE_CH390D 1
#define ETH_MISO_PIN 12
#define ETH_MOSI_PIN 11
#define ETH_SCLK_PIN 13
#define ETH_CS_PIN 14
#define ETH_INT_PIN 10
#define ETH_RST_PIN 9
// #define ETH_ADDR 1
#define USE_ETHERNET_DEFAULT 1
variants/esp32s3/ELECROW-ThinkNode-M2/variant.h
+2 -2
View File
@@ -40,8 +40,8 @@
// Battery
// #define BATTERY_PIN 2
#define BATTERY_PIN 17
// #define ADC_CHANNEL ADC1_GPIO2_CHANNEL
#define ADC_CHANNEL ADC2_GPIO17_CHANNEL
// #define ADC_CHANNEL ADC_CHANNEL_1
#define ADC_CHANNEL ADC_CHANNEL_6
#define BATTERY_SENSE_RESOLUTION_BITS 12
#define BATTERY_SENSE_RESOLUTION 4096.0
#undef AREF_VOLTAGE
variants/esp32s3/ELECROW-ThinkNode-M5/variant.h
+1 -1
View File
@@ -16,7 +16,7 @@
// USB_CHECK
#define EXT_PWR_DETECT 12
#define BATTERY_PIN 8
#define ADC_CHANNEL ADC1_GPIO8_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_7
#define ADC_MULTIPLIER 2.0 // 2.0 + 10% for correction of display undervoltage.
variants/esp32s3/ELECROW-ThinkNode-M7/pins_arduino.h
+19
View File
@@ -0,0 +1,19 @@
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include <stdint.h>
#define USB_VID 0x303a
#define USB_PID 0x1001
// The default Wire will be mapped to PMU and RTC
static const uint8_t SDA = 17;
static const uint8_t SCL = 18;
// Default SPI is the LR1110 radio bus
static const uint8_t SS = 12;
static const uint8_t MOSI = 10;
static const uint8_t MISO = 9;
static const uint8_t SCK = 11;
#endif /* Pins_Arduino_h */
variants/esp32s3/ELECROW-ThinkNode-M7/platformio.ini
+28
View File
@@ -0,0 +1,28 @@
[env:thinknode_m7]
extends = esp32s3_base
board = ThinkNode-M7
build_flags =
${esp32s3_base.build_flags}
-D ELECROW_ThinkNode_M7
-D HAS_UDP_MULTICAST=1
-D BOARD_HAS_PSRAM
-I variants/esp32s3/ELECROW-ThinkNode-M7
-mfix-esp32-psram-cache-issue
custom_sdkconfig =
${esp32s3_base.custom_sdkconfig}
CONFIG_ETH_ENABLED=y
CONFIG_ARDUINO_SELECTIVE_Ethernet=y
lib_ignore =
Ethernet
build_src_filter =
${esp32s3_base.build_src_filter}
+<../variants/esp32s3/ELECROW-ThinkNode-M7/*>
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=github-tags depName=ESP32-CH390 packageName=meshtastic/ESP32-CH390
https://github.com/meshtastic/ESP32-CH390/archive/refs/tags/v1.0.1.zip
variants/esp32s3/ELECROW-ThinkNode-M7/rfswitch.h
+11
View File
@@ -0,0 +1,11 @@
#include "RadioLib.h"
static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
static const Module::RfSwitchMode_t rfswitch_table[] = {
// mode DIO5 DIO6
{LR11x0::MODE_STBY, {LOW, LOW}}, {LR11x0::MODE_RX, {HIGH, LOW}},
{LR11x0::MODE_TX, {HIGH, HIGH}}, {LR11x0::MODE_TX_HP, {LOW, HIGH}},
{LR11x0::MODE_TX_HF, {LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW}},
{LR11x0::MODE_WIFI, {LOW, LOW}}, END_OF_MODE_TABLE,
};
variants/esp32s3/ELECROW-ThinkNode-M7/variant.h
+45
View File
@@ -0,0 +1,45 @@
#define HAS_GPS 0
#define HAS_WIRE 0
#define HAS_SCREEN 0
#define I2C_NO_RESCAN
#define UART_TX 43
#define UART_RX 44
#define WIFI_LED 3
#define WIFI_STATE_ON 0
#define LED_PIN 46
#define LED_STATE_ON 0
#define BUTTON_PIN 4
#define BUTTON_ACTIVE_LOW true
#define BUTTON_ACTIVE_PULLUP true
#define LORA_SCK 11
#define LORA_MISO 9
#define LORA_MOSI 10
#define LORA_CS 12
#define LORA_RESET 39
#define USE_LR1110
#define LR1110_SPI_SCK_PIN LORA_SCK
#define LR1110_SPI_MISO_PIN LORA_MISO
#define LR1110_SPI_MOSI_PIN LORA_MOSI
#define LR1110_SPI_NSS_PIN LORA_CS
#define LR1110_IRQ_PIN 38
#define LR1110_BUSY_PIN 13
#define LR1110_NRESET_PIN LORA_RESET
#define LR11X0_DIO3_TCXO_VOLTAGE 1.8
#define LR11X0_DIO_AS_RF_SWITCH
#define HAS_ETHERNET 1
#define USE_CH390D 1
#define ETH_MISO_PIN 14
#define ETH_MOSI_PIN 48
#define ETH_SCLK_PIN 47
#define ETH_CS_PIN 21
#define ETH_INT_PIN 45
// #define ETH_ADDR 1
#define USE_ETHERNET_DEFAULT 1
variants/esp32s3/crowpanel-esp32s3-5-epaper/variant.h
+1 -1
View File
@@ -17,7 +17,7 @@
// #define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to
// measure battery voltage ratio of voltage divider = 2.0 (assumption)
// #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
// #define ADC_CHANNEL ADC1_GPIO1_CHANNEL
// #define ADC_CHANNEL ADC_CHANNEL_0
#define I2C_SDA SDA // 21
#define I2C_SCL SCL // 15
variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini
+2 -1
View File
@@ -11,7 +11,7 @@ upload_speed = 921600
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
build_unflags =
${esp32s3_base.build_unflags}
-DARDUINO_USB_MODE=1
@@ -26,3 +26,4 @@ build_flags =
-DBOARD_HAS_PSRAM
-mfix-esp32-psram-cache-issue
-DARDUINO_USB_MODE=0
-DARDUINO_USB_CDC_ON_BOOT=1
variants/esp32s3/diy/my_esp32s3_diy_oled/platformio.ini
-4
View File
@@ -8,13 +8,9 @@ board_build.f_cpu = 240000000L
upload_protocol = esptool
;upload_port = /dev/ttyACM0
upload_speed = 921600
build_unflags =
${esp32s3_base.build_unflags}
-DARDUINO_USB_MODE=1
build_flags =
${esp32s3_base.build_flags}
-D PRIVATE_HW
-I variants/esp32s3/diy/my_esp32s3_diy_oled
-DBOARD_HAS_PSRAM
-mfix-esp32-psram-cache-issue
-DARDUINO_USB_MODE=0
variants/esp32s3/diy/t-energy-s3_e22/platformio.ini
+1 -4
View File
@@ -6,13 +6,10 @@ board_build.partitions = default_16MB.csv
board_level = extra
board_upload.flash_size = 16MB ;Specify the FLASH capacity as 16MB
board_build.arduino.memory_type = qio_opi ;Enable internal PSRAM
build_unflags =
${esp32s3_base.build_unflags}
-D ARDUINO_USB_MODE=1
build_flags =
${esp32s3_base.build_flags}
-D EBYTE_ESP32_S3
-D BOARD_HAS_PSRAM
-D ARDUINO_USB_MODE=0
-D ARDUINO_USB_MODE=1
-D ARDUINO_USB_CDC_ON_BOOT=1
-I variants/esp32s3/diy/t-energy-s3_e22
variants/esp32s3/diy/t-energy-s3_e22/variant.h
+1 -1
View File
@@ -4,7 +4,7 @@
// Battery
#define BATTERY_PIN 3
#define ADC_MULTIPLIER 2.0
#define ADC_CHANNEL ADC1_GPIO3_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_2
// Button on NanoVHF PCB
#define BUTTON_PIN 39
variants/esp32s3/elecrow_panel/pins_arduino.h
+3 -3
View File
@@ -15,9 +15,9 @@ static const uint8_t MOSI = 48;
static const uint8_t MISO = 47;
static const uint8_t SCK = 41;
static const uint8_t SPI_MOSI = 6;
static const uint8_t SPI_SCK = 5;
static const uint8_t SPI_MISO = 4;
// static const uint8_t SPI_MOSI = 6;
// static const uint8_t SPI_SCK = 5;
// static const uint8_t SPI_MISO = 4;
static const uint8_t A0 = 1;
static const uint8_t A1 = 2;
variants/esp32s3/elecrow_panel/platformio.ini
+6 -1
View File
@@ -38,6 +38,9 @@ build_flags = ${esp32s3_base.build_flags} -Os
-D USE_PACKET_API
-D HAS_SDCARD
-D SD_SPI_FREQUENCY=75000000
-D SPI_MISO=4
-D SPI_MOSI=6
-D SPI_SCK=5
lib_deps = ${esp32s3_base.lib_deps}
${device-ui_base.lib_deps}
@@ -47,7 +50,9 @@ lib_deps = ${esp32s3_base.lib_deps}
earlephilhower/ESP8266SAM@1.1.0
# renovate: datasource=custom.pio depName=TCA9534 packageName=hideakitai/library/TCA9534
hideakitai/TCA9534@0.1.1
lovyan03/LovyanGFX@1.2.0 ; note: v1.2.7 breaks the elecrow 7" display functionality
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.19
; REVISIT note: v1.2.7 breaks the elecrow 7" display functionality
[crowpanel_small_esp32s3_base] ; 2.4, 2.8, 3.5 inch
extends = crowpanel_base
variants/esp32s3/esp32-s3-pico/platformio.ini
+1 -1
View File
@@ -23,4 +23,4 @@ build_flags = ${esp32s3_base.build_flags}
lib_deps = ${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
zinggjm/GxEPD2@1.6.8
zinggjm/GxEPD2@1.6.9
variants/esp32s3/esp32-s3-pico/variant.h
+2 -2
View File
@@ -21,8 +21,8 @@
// https://www.waveshare.com/img/devkit/ESP32-S3-Pico/ESP32-S3-Pico-details-inter-1.jpg
// digram is incorrect labeled as battery pin is getting readings on GPIO7_CH1?
#define BATTERY_PIN 7
#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
// #define ADC_CHANNEL ADC1_GPIO6_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_6
// #define ADC_CHANNEL ADC_CHANNEL_5
// ratio of voltage divider = 3.0 (R17=200k, R18=100k)
#define ADC_MULTIPLIER 3.1 // 3.0 + a bit for being optimistic
variants/esp32s3/esp32s3.ini
+10
View File
@@ -4,6 +4,16 @@ custom_esp32_kind = esp32s3
monitor_speed = 115200
build_flags =
${esp32_common.build_flags}
-mtext-section-literals
custom_sdkconfig =
${esp32_common.custom_sdkconfig}
; CONFIG_BT_NIMBLE_EXT_ADV=y
; CONFIG_BT_NIMBLE_TRANSPORT_EVT_SIZE=257
; CONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
lib_deps =
${esp32_common.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
variants/esp32s3/hackaday-communicator/platformio.ini
+2 -2
View File
@@ -16,5 +16,5 @@ build_flags = ${esp32s3_base.build_flags}
-I variants/esp32s3/hackaday-communicator
lib_deps = ${esp32s3_base.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-Arduino_GFX packageName=https://github.com/meshtastic/Arduino_GFX gitBranch=master
https://github.com/meshtastic/Arduino_GFX/archive/054e81ffaf23784830a734e3c184346789349406.zip
# renovate: datasource=git-refs depName=moononournation-Arduino_GFX packageName=https://github.com/moononournation/Arduino_GFX gitBranch=master
https://github.com/moononournation/Arduino_GFX/archive/refs/tags/v1.6.5.zip
variants/esp32s3/heltec_capsule_sensor_v3/variant.h
+2 -1
View File
@@ -1,13 +1,14 @@
#define LED_POWER 33
#define LED_POWER2 34
#define EXT_PWR_DETECT 35
#define EXT_PWR_DETECT_MODE INPUT_PULLUP
#define BUTTON_PIN 18
#define BUTTON_ACTIVE_LOW false
#define BUTTON_ACTIVE_PULLUP false
#define BATTERY_PIN 7 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_6
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
#define ADC_MULTIPLIER (4.9 * 1.045)
#define ADC_CTRL 36 // active HIGH, powers the voltage divider. Only on 1.1
variants/esp32s3/heltec_sensor_hub/variant.h
+2 -1
View File
@@ -1,11 +1,12 @@
#define EXT_PWR_DETECT 20
#define EXT_PWR_DETECT_MODE INPUT_PULLUP
#define BUTTON_PIN 17
#define BUTTON_ACTIVE_LOW false
#define BUTTON_ACTIVE_PULLUP false
#define BATTERY_PIN 7 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_6
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
#define ADC_MULTIPLIER (4.9 * 1.045)
#define ADC_CTRL 34 // active HIGH, powers the voltage divider. Only on 1.1
variants/esp32s3/heltec_v3/variant.h
+1 -1
View File
@@ -16,7 +16,7 @@
#define ADC_CTRL 37
#define ADC_CTRL_ENABLED LOW
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_0
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
#define ADC_MULTIPLIER 4.9 * 1.045
variants/esp32s3/heltec_v4/platformio.ini
+6 -4
View File
@@ -89,8 +89,10 @@ build_flags =
-D VIEW_240x320
-D DISPLAY_SET_RESOLUTION
-D DISPLAY_SIZE=240x320 ; portrait mode
-D LGFX_SPI_3WIRE=true
-D LGFX_PIN_SCK=17
-D LGFX_PIN_MOSI=33
-D LGFX_PIN_MISO=-1
-D LGFX_PIN_DC=16
-D LGFX_PIN_CS=15
-D LGFX_PIN_BL=21
@@ -120,10 +122,10 @@ build_flags =
-D TFT_OFFSET_Y=0
-D TFT_OFFSET_ROTATION=0
-D SCREEN_ROTATE
-D SCREEN_TRANSITION_FRAMERATE=5
-D SCREEN_TRANSITION_FRAMERATE=30
-D BRIGHTNESS_DEFAULT=130 ; Medium Low Brightness
-D HAS_TOUCHSCREEN=1
-D TOUCH_I2C_PORT=0
-D TOUCH_I2C_PORT=1
-D TOUCH_SLAVE_ADDRESS=0x2E
-D SCREEN_TOUCH_INT=TOUCH_INT_PIN
-D SCREEN_TOUCH_RST=TOUCH_RST_PIN
@@ -131,6 +133,6 @@ build_flags =
lib_deps = ${heltec_v4_base.lib_deps}
${device-ui_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.19
lovyan03/LovyanGFX@1.2.21
# renovate: datasource=git-refs depName=Quency-D_chsc6x packageName=https://github.com/Quency-D/chsc6x gitBranch=master
https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
variants/esp32s3/heltec_v4/variant.h
+1 -1
View File
@@ -4,7 +4,7 @@
#define ADC_CTRL 37
#define ADC_CTRL_ENABLED HIGH
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_0
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
#define ADC_MULTIPLIER 4.9 * 1.045
variants/esp32s3/heltec_v4_r8/pins_arduino.h
+56
View File
@@ -0,0 +1,56 @@
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include <stdint.h>
#define USB_VID 0x303a
#define USB_PID 0x1001
static const uint8_t TX = 43;
static const uint8_t RX = 44;
static const uint8_t SDA = 17;
static const uint8_t SCL = 18;
static const uint8_t SS = 8;
static const uint8_t MOSI = 10;
static const uint8_t MISO = 11;
static const uint8_t SCK = 9;
static const uint8_t A0 = 1;
static const uint8_t A1 = 2;
static const uint8_t A2 = 3;
static const uint8_t A3 = 4;
static const uint8_t A4 = 5;
static const uint8_t A5 = 6;
static const uint8_t A6 = 7;
static const uint8_t A7 = 8;
static const uint8_t A8 = 9;
static const uint8_t A9 = 10;
static const uint8_t A10 = 11;
static const uint8_t A11 = 12;
static const uint8_t A12 = 13;
static const uint8_t A13 = 14;
static const uint8_t A14 = 15;
static const uint8_t A15 = 16;
static const uint8_t A16 = 17;
static const uint8_t A17 = 18;
static const uint8_t A18 = 19;
static const uint8_t A19 = 20;
static const uint8_t T1 = 1;
static const uint8_t T2 = 2;
static const uint8_t T3 = 3;
static const uint8_t T4 = 4;
static const uint8_t T5 = 5;
static const uint8_t T6 = 6;
static const uint8_t T7 = 7;
static const uint8_t T8 = 8;
static const uint8_t T9 = 9;
static const uint8_t T10 = 10;
static const uint8_t T11 = 11;
static const uint8_t T12 = 12;
static const uint8_t T13 = 13;
static const uint8_t T14 = 14;
#endif /* Pins_Arduino_h */
variants/esp32s3/heltec_v4_r8/platformio.ini
+145
View File
@@ -0,0 +1,145 @@
[heltec_v4_r8_base]
extends = esp32s3_base
board = heltec_v4_r8
board_check = true
board_build.partitions = default_16MB.csv
build_flags =
${esp32s3_base.build_flags}
-D HELTEC_V4_R8
-D HAS_LORA_FEM=1
-D BOARD_HAS_PSRAM
-I variants/esp32s3/heltec_v4_r8
-ULED_BUILTIN
[env:heltec-v4-r8-oled]
custom_meshtastic_hw_model = 132
custom_meshtastic_hw_model_slug = HELTEC_V4_R8
custom_meshtastic_architecture = esp32-s3
custom_meshtastic_actively_supported = true
custom_meshtastic_support_level = 1
custom_meshtastic_display_name = Heltec V4 R8
custom_meshtastic_images = heltec_v4_r8.svg
custom_meshtastic_tags = Heltec
custom_meshtastic_requires_dfu = true
custom_meshtastic_partition_scheme = 16MB
extends = heltec_v4_r8_base
build_flags =
${heltec_v4_r8_base.build_flags}
-D HELTEC_V4_R8_OLED
-D USE_SSD1306 ; Heltec_v4_R8 has an SSD1315 display (compatible with SSD1306 driver)
-D LED_POWER=46
-D RESET_OLED=21
-D I2C_SDA=17
-D I2C_SCL=18
[env:heltec-v4-r8-tft]
custom_meshtastic_hw_model = 132
custom_meshtastic_hw_model_slug = HELTEC_V4_R8
custom_meshtastic_architecture = esp32-s3
custom_meshtastic_actively_supported = true
custom_meshtastic_support_level = 1
custom_meshtastic_display_name = Heltec V4 R8 TFT
custom_meshtastic_images = heltec_v4_r8_tft.svg
custom_meshtastic_tags = Heltec
custom_meshtastic_requires_dfu = true
custom_meshtastic_partition_scheme = 16MB
extends = heltec_v4_r8_base
build_flags =
${heltec_v4_r8_base.build_flags} ;-Os
-D HELTEC_V4_R8_TFT
-D I2C_SDA=17
-D I2C_SCL=18
-D PIN_BUTTON2=46
-D ALT_BUTTON_PIN=PIN_BUTTON2
-D ALT_BUTTON_ACTIVE_LOW=false
-D PIN_BUZZER=4
-D USE_PIN_BUZZER=PIN_BUZZER
-D CONFIG_ARDUHAL_LOG_COLORS
-D RADIOLIB_DEBUG_SPI=0
-D RADIOLIB_DEBUG_PROTOCOL=0
-D RADIOLIB_DEBUG_BASIC=0
-D RADIOLIB_VERBOSE_ASSERT=0
-D RADIOLIB_SPI_PARANOID=0
-D CONFIG_DISABLE_HAL_LOCKS=1
-D INPUTDRIVER_BUTTON_TYPE=0
-D HAS_SCREEN=1
-D HAS_TFT=1
-D RAM_SIZE=5120
-D LV_LVGL_H_INCLUDE_SIMPLE
-D LV_CONF_INCLUDE_SIMPLE
-D LV_COMP_CONF_INCLUDE_SIMPLE
-D LV_USE_SYSMON=0
-D LV_USE_PROFILER=0
-D LV_USE_PERF_MONITOR=0
-D LV_USE_MEM_MONITOR=0
-D LV_USE_LOG=0
-D LV_BUILD_TEST=0
-D USE_LOG_DEBUG
-D LOG_DEBUG_INC=\"DebugConfiguration.h\"
-D USE_PACKET_API
-D LGFX_DRIVER=LGFX_HELTEC_V4_TFT
-D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_HELTEC_V4_TFT.h\"
-D VIEW_240x320
-D DISPLAY_SET_RESOLUTION
-D DISPLAY_SIZE=240x320 ; portrait mode
-D LGFX_SPI_3WIRE=false
-D LGFX_PIN_SCK=16
-D LGFX_PIN_MOSI=15
-D LGFX_PIN_MISO=45
-D LGFX_PIN_DC=48
-D LGFX_PIN_CS=47
-D LGFX_PIN_BL=44
-D LGFX_PIN_RST=21
-D CUSTOM_TOUCH_DRIVER
-D TOUCH_SDA_PIN=I2C_SDA
-D TOUCH_SCL_PIN=I2C_SCL
-D TOUCH_INT_PIN=-1
-D TOUCH_RST_PIN=-1
;base UI
-D TFT_CS=LGFX_PIN_CS
-D ST7789_CS=TFT_CS
-D ST7789_RS=LGFX_PIN_DC
-D ST7789_SDA=LGFX_PIN_MOSI
-D ST7789_SCK=LGFX_PIN_SCK
-D ST7789_RESET=LGFX_PIN_RST
-D ST7789_MISO=LGFX_PIN_MISO
-D ST7789_BUSY=-1
-D ST7789_BL=LGFX_PIN_BL
-D ST7789_SPI_HOST=SPI3_HOST
-D TFT_BL=ST7789_BL
-D SPI_FREQUENCY=75000000
-D SPI_READ_FREQUENCY=SPI_FREQUENCY
-D SPI_3_WIRE=false
-D TFT_HEIGHT=320
-D TFT_WIDTH=240
-D TFT_OFFSET_X=0
-D TFT_OFFSET_Y=0
-D TFT_OFFSET_ROTATION=0
-D SCREEN_ROTATE
-D SCREEN_TRANSITION_FRAMERATE=5
-D BRIGHTNESS_DEFAULT=130 ; Medium Low Brightness
-D HAS_TOUCHSCREEN=1
-D TOUCH_I2C_PORT=0
-D TOUCH_SLAVE_ADDRESS=0x2E
-D SCREEN_TOUCH_INT=TOUCH_INT_PIN
-D SCREEN_TOUCH_RST=TOUCH_RST_PIN
; Have SPI interface SD card slot
-D HAS_SDCARD
-D SDCARD_USE_SPI1
-D SDCARD_USER_SPI_BEGIN
-D SPI_MOSI=LGFX_PIN_MOSI
-D SPI_SCK=LGFX_PIN_SCK
-D SPI_MISO=LGFX_PIN_MISO
-D SPI_CS=3
-D SDCARD_CS=SPI_CS
-D SD_SPI_FREQUENCY=SPI_FREQUENCY
lib_deps = ${heltec_v4_r8_base.lib_deps}
${device-ui_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.21
# renovate: datasource=git-refs depName=Quency-D_chsc6x packageName=https://github.com/Quency-D/chsc6x gitBranch=master
https://github.com/Quency-D/chsc6x/archive/3b2b6cebf3177b3e2c33d06e07909b0b10159516.zip
variants/esp32s3/heltec_v4_r8/variant.h
+72
View File
@@ -0,0 +1,72 @@
#define VEXT_ENABLE 40 // active low, powers the oled display and the lora antenna boost
#define VEXT_ON_VALUE LOW
#define BUTTON_PIN 0
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC_CHANNEL_0
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
#define ADC_MULTIPLIER 4.9 * 1.035
#define USE_SX1262
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 12
#define LORA_DIO1 14 // SX1262 IRQ
#define LORA_DIO2 13 // SX1262 BUSY
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TCXO is enabled
#define LORA_SCK 9
#define LORA_MISO 11
#define LORA_MOSI 10
#define LORA_CS 8
#define SX126X_CS LORA_CS
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// Enable Traffic Management Module for Heltec V4
#ifndef HAS_TRAFFIC_MANAGEMENT
#define HAS_TRAFFIC_MANAGEMENT 1
#endif
#ifndef TRAFFIC_MANAGEMENT_CACHE_SIZE
#define TRAFFIC_MANAGEMENT_CACHE_SIZE 2048
#endif
// ---- KCT8103L RF FRONT END CONFIGURATION ----
// The Heltec V4.3 uses a KCT8103L FEM chip with integrated PA and LNA
// RF path: SX1262 -> Pi attenuator -> KCT8103L PA -> Antenna
// Control logic (from KCT8103L datasheet):
// Transmit PA: CSD=1, CTX=1, CPS=1
// Receive LNA: CSD=1, CTX=0, CPS=X (21dB gain, 1.9dB NF)
// Receive bypass: CSD=1, CTX=1, CPS=0
// Shutdown: CSD=0, CTX=X, CPS=X
// Pin mapping:
// CPS (pin 5) -> SX1262 DIO2: TX/RX path select (automatic via SX126X_DIO2_AS_RF_SWITCH)
// CSD (pin 4) -> GPIO2: Chip enable (HIGH=on, LOW=shutdown)
// CTX (pin 6) -> GPIO5: Switch between Receive LNA Mode and Receive Bypass Mode. (HIGH=RX bypass, LOW=RX LNA)
// VCC0/VCC1 -> Vfem via U3 LDO, controlled by GPIO7
// KCT8103L FEM: TX/RX path switching is handled by DIO2 -> CPS pin (via SX126X_DIO2_AS_RF_SWITCH)
#define USE_KCT8103L_PA
#define LORA_PA_POWER 7 // VFEM_Ctrl - KCT8103L LDO power enable
#define LORA_KCT8103L_PA_CSD 2 // CSD - KCT8103L chip enable (HIGH=on)
#define LORA_KCT8103L_PA_CTX 5 // CTX - Switch between Receive LNA Mode and Receive Bypass Mode. (HIGH=RX bypass, LOW=RX LNA)
#if HAS_TFT
#define USE_TFTDISPLAY 1
#endif
/*
* GPS pins
*/
#define GPS_L76K
#define PIN_GPS_EN (42)
#define GPS_EN_ACTIVE LOW
#define PERIPHERAL_WARMUP_MS 1000 // Make sure I2C QuickLink has stable power before continuing
#define PIN_GPS_PPS (41)
// Seems to be missing on this new board
#define GPS_TX_PIN (38) // This is for bits going TOWARDS the CPU
#define GPS_RX_PIN (39) // This is for bits going TOWARDS the GPS
#define GPS_THREAD_INTERVAL 50
variants/esp32s3/heltec_vision_master_e213/platformio.ini
+2
View File
@@ -16,6 +16,7 @@ board = heltec_vision_master_e213
board_build.partitions = default_8MB.csv
build_flags =
${esp32s3_base.build_flags}
-DBOARD_HAS_PSRAM
-Ivariants/esp32s3/heltec_vision_master_e213
-DHELTEC_VISION_MASTER_E213
-DUSE_EINK
@@ -44,6 +45,7 @@ build_src_filter =
build_flags =
${esp32s3_base.build_flags}
${inkhud.build_flags}
-D BOARD_HAS_PSRAM
-I variants/esp32s3/heltec_vision_master_e213
-D HELTEC_VISION_MASTER_E213
lib_deps =
variants/esp32s3/heltec_vision_master_e213/variant.h
+1 -1
View File
@@ -28,7 +28,7 @@
#define ADC_CTRL 46
#define ADC_CTRL_ENABLED HIGH
#define BATTERY_PIN 7
#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_6
#define ADC_MULTIPLIER 4.9 * 1.03
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5
variants/esp32s3/heltec_vision_master_e290/variant.h
+1 -1
View File
@@ -27,7 +27,7 @@
#define ADC_CTRL 46
#define ADC_CTRL_ENABLED HIGH
#define BATTERY_PIN 7
#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_6
#define ADC_MULTIPLIER 4.9 * 1.03
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5
variants/esp32s3/heltec_vision_master_t190/platformio.ini
+1 -1
View File
@@ -20,5 +20,5 @@ build_flags =
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-st7789 packageName=https://github.com/meshtastic/st7789 gitBranch=main
https://github.com/meshtastic/st7789/archive/92bae2e4a307afb430c3b0bc3d661c55ee1565f0.zip
https://github.com/meshtastic/st7789/archive/5180423ae2dbf5885168a8bfb308c7fb7eff6930.zip
upload_speed = 921600
variants/esp32s3/heltec_vision_master_t190/variant.h
+1 -1
View File
@@ -45,7 +45,7 @@
#define ADC_CTRL 46
#define ADC_CTRL_ENABLED HIGH
#define BATTERY_PIN 6
#define ADC_CHANNEL ADC1_GPIO6_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_5
#define ADC_MULTIPLIER 4.9 * 1.03 // Voltage divider is roughly 1:1
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // Voltage divider output is quite high
variants/esp32s3/heltec_wireless_paper/variant.h
+1 -1
View File
@@ -24,7 +24,7 @@
#define VEXT_ON_VALUE LOW
#define ADC_CTRL 19
#define BATTERY_PIN 20
#define ADC_CHANNEL ADC2_GPIO20_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_9
#define ADC_MULTIPLIER 2 // Voltage divider is roughly 1:1
#define BAT_MEASURE_ADC_UNIT 2 // Use ADC2
#define ADC_ATTENUATION ADC_ATTEN_DB_12 // Voltage divider output is quite high
variants/esp32s3/heltec_wireless_paper_v1/variant.h
+1 -1
View File
@@ -25,7 +25,7 @@
#define VEXT_ON_VALUE LOW
#define ADC_CTRL 19
#define BATTERY_PIN 20
#define ADC_CHANNEL ADC2_GPIO20_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_9
#define ADC_MULTIPLIER 2 // Voltage divider is roughly 1:1
#define BAT_MEASURE_ADC_UNIT 2 // Use ADC2
#define ADC_ATTENUATION ADC_ATTEN_DB_12 // Voltage divider output is quite high
variants/esp32s3/heltec_wireless_tracker/platformio.ini
+4 -2
View File
@@ -15,13 +15,15 @@ board = heltec_wireless_tracker
board_build.partitions = default_8MB.csv
upload_protocol = esptool
build_flags =
build_flags =
${esp32s3_base.build_flags}
-I variants/esp32s3/heltec_wireless_tracker
-D HELTEC_TRACKER_V1_1
-DARDUINO_USB_CDC_ON_BOOT=1
-DARDUINO_USB_MODE=1
;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.19
lovyan03/LovyanGFX@1.2.21
variants/esp32s3/heltec_wireless_tracker/variant.h
+1 -1
View File
@@ -39,7 +39,7 @@
#define BUTTON_PIN 0
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_0
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
#define ADC_MULTIPLIER 4.9 * 1.045
#define ADC_CTRL 2 // active HIGH, powers the voltage divider. Only on 1.1
variants/esp32s3/heltec_wireless_tracker_V1_0/platformio.ini
+1 -1
View File
@@ -22,4 +22,4 @@ build_flags =
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.19
lovyan03/LovyanGFX@1.2.21
variants/esp32s3/heltec_wireless_tracker_V1_0/variant.h
+1 -1
View File
@@ -35,7 +35,7 @@
#define BUTTON_PIN 0
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_0
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
#define ADC_MULTIPLIER 4.9 * 1.045
variants/esp32s3/heltec_wireless_tracker_v2/platformio.ini
+1 -1
View File
@@ -21,4 +21,4 @@ build_flags =
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.19
lovyan03/LovyanGFX@1.2.21
variants/esp32s3/heltec_wireless_tracker_v2/variant.h
+1 -1
View File
@@ -34,7 +34,7 @@
#define BUTTON_PIN 0
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_0
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
#define ADC_MULTIPLIER 4.9 * 1.045
#define ADC_CTRL 2 // active HIGH, powers the voltage divider.
variants/esp32s3/heltec_wsl_v3/variant.h
+1 -1
View File
@@ -10,7 +10,7 @@
#define ADC_CTRL 37
#define ADC_CTRL_ENABLED LOW
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_0
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
#define ADC_MULTIPLIER 4.9 * 1.045
variants/esp32s3/icarus/platformio.ini
+1 -3
View File
@@ -7,12 +7,10 @@ board_build.mcu = esp32s3
board_build.partitions = default_8MB.csv
upload_protocol = esptool
upload_speed = 921600
build_unflags =
${esp32s3_base.build_unflags}
-DARDUINO_USB_MODE=1
build_flags =
${esp32s3_base.build_flags}
-D PRIVATE_HW
-I variants/esp32s3/icarus
-DBOARD_HAS_PSRAM
-DARDUINO_USB_CDC_ON_BOOT=1
-DARDUINO_USB_MODE=0
variants/esp32s3/m5stack_cardputer_adv/platformio.ini
+1 -4
View File
@@ -10,13 +10,10 @@ build_flags =
-D M5STACK_CARDPUTER_ADV
-D ARDUINO_USB_CDC_ON_BOOT=1
-I variants/esp32s3/m5stack_cardputer_adv
build_src_filter =
${esp32s3_base.build_src_filter}
+<../variants/esp32s3/m5stack_cardputer_adv>
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-st7789 packageName=https://github.com/meshtastic/st7789 gitBranch=main
https://github.com/meshtastic/st7789/archive/92bae2e4a307afb430c3b0bc3d661c55ee1565f0.zip
https://github.com/meshtastic/st7789/archive/5180423ae2dbf5885168a8bfb308c7fb7eff6930.zip
# renovate: datasource=github-tags depName=pschatzmann_arduino-audio-driver packageName=pschatzmann/arduino-audio-driver
https://github.com/pschatzmann/arduino-audio-driver/archive/v0.2.1.zip
# renovate: datasource=git-refs depName=ESP8266Audio packageName=https://github.com/meshtastic/ESP8266Audio gitBranch=meshtastic-2.0.0-dacfix
variants/esp32s3/m5stack_cardputer_adv/variant.cpp
-40
View File
@@ -1,40 +0,0 @@
#include "AudioBoard.h"
#include "configuration.h"
DriverPins PinsAudioBoardES8311;
AudioBoard board(AudioDriverES8311, PinsAudioBoardES8311);
// M5stack Cardputer ADV specific init
void lateInitVariant()
{
// AudioDriverLogger.begin(Serial, AudioDriverLogLevel::Debug);
// I2C: function, scl, sda
PinsAudioBoardES8311.addI2C(PinFunction::CODEC, Wire);
// I2S: function, mclk, bck, ws, data_out, data_in
PinsAudioBoardES8311.addI2S(PinFunction::CODEC, DAC_I2S_MCLK, DAC_I2S_BCK, DAC_I2S_WS, DAC_I2S_DOUT, DAC_I2S_DIN);
// configure codec
CodecConfig cfg;
cfg.input_device = ADC_INPUT_LINE1;
cfg.output_device = DAC_OUTPUT_ALL;
cfg.i2s.bits = BIT_LENGTH_16BITS;
cfg.i2s.rate = RATE_44K;
board.begin(cfg);
// extra ES8311 init
auto es8311_write_reg = [](uint8_t reg, uint8_t val) {
Wire.beginTransmission(0x18); // ES8311 i2c address
Wire.write(reg);
Wire.write(val);
Wire.endTransmission();
};
es8311_write_reg(0x00, 0x80); // reset, power on
es8311_write_reg(0x01, 0xB5); // MCLK = BCLK
es8311_write_reg(0x02, 0x18); // CLOCK_MANAGER/ MULT_PRE=3
es8311_write_reg(0x0D, 0x01); // analog power up
es8311_write_reg(0x12, 0x00); // DAC power up
es8311_write_reg(0x13, 0x10); // enable HP drive
es8311_write_reg(0x32, 0xBF); // DAC volume (0dB)
es8311_write_reg(0x37, 0x08); // EQ bypass
}
variants/esp32s3/m5stack_cardputer_adv/variant.h
+2 -1
View File
@@ -9,6 +9,7 @@
#define ST7789_BUSY -1
// #define VTFT_CTRL 38
#define VTFT_LEDA 38
#define TFT_BACKLIGHT_ON HIGH
// #define ST7789_BL (32+6)
#define ST7789_SPI_HOST SPI2_HOST
// #define TFT_BL (32+6)
@@ -83,7 +84,7 @@
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800)
#define BATTERY_PIN 10 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO10_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_9
#define ADC_MULTIPLIER 2 * 1.02 // 100k + 100k, and add 2% to kick the voltage over the max voltage to show charging.
// BMI270 6-axis IMU on internal I2C bus
variants/esp32s3/mesh-tab/platformio.ini
+1 -1
View File
@@ -55,7 +55,7 @@ lib_deps =
${esp32s3_base.lib_deps}
${device-ui_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.19
lovyan03/LovyanGFX@1.2.21
[mesh_tab_xpt2046]
extends = mesh_tab_base
variants/esp32s3/mesh-tab/variant.h
+1 -1
View File
@@ -10,7 +10,7 @@
#define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
// ratio of voltage divider (100k, 220k)
#define ADC_MULTIPLIER 1.6 // 1.45 + 10% for correction of display undervoltage.
#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_3
// LED
#define LED_POWER 21
variants/esp32s3/mini-epaper-s3/variant.h
+1 -1
View File
@@ -18,7 +18,7 @@
#define BATTERY_PIN 2 // A battery voltage measurement pin, voltage divider connected here to
// measure battery voltage ratio of voltage divider = 2.0 (assumption)
#define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
#define ADC_CHANNEL ADC1_GPIO2_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_1
// Display (E-Ink)
#define PIN_EINK_EN 42
variants/esp32s3/picomputer-s3/platformio.ini
+1 -1
View File
@@ -25,7 +25,7 @@ build_flags =
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.19
lovyan03/LovyanGFX@1.2.21
build_src_filter =
${esp32s3_base.build_src_filter}
variants/esp32s3/picomputer-s3/variant.h
+2 -3
View File
@@ -11,7 +11,7 @@
// A battery voltage measurement pin, voltage divider connected here to measure battery voltage
// ratio of voltage divider = 3.0 (R11=200k, R7=100k)
#define ADC_MULTIPLIER 3.1 // 3.0 with correction of display undervoltage.
#define ADC_CHANNEL ADC1_GPIO2_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_1
#define USE_RF95 // RFM95/SX127x
@@ -47,10 +47,9 @@
#define TFT_OFFSET_Y 0
#define TFT_OFFSET_ROTATION 0
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5
#define SCREEN_TRANSITION_FRAMERATE 30
// Picomputer gets a white on black display
#define TFT_MESH_OVERRIDE COLOR565(255, 255, 255)
#define INPUTBROKER_MATRIX_TYPE 1
variants/esp32s3/rak3312/platformio.ini
+1 -1
View File
@@ -29,7 +29,7 @@ board_level = extra
upload_protocol = esptool
build_flags =
${esp32_base.build_flags}
${esp32s3_base.build_flags}
-D RAK3312
-D _VARIANT_RAK3112_
-I variants/esp32s3/rak3312
variants/esp32s3/rak3312/variant.h
+2 -2
View File
@@ -30,7 +30,7 @@
#define LED_STATE_ON 1 // State when LED is litted
#define BATTERY_PIN 1
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_0
#ifdef _VARIANT_RAK3112_ // Modular variant (stamp)
#define ADC_MULTIPLIER 2.11
@@ -55,4 +55,4 @@
#define GPS_TX_PIN 43
#define GPS_RX_PIN 44
#endif
#endif
variants/esp32s3/rak_wismesh_tap_v2/platformio.ini
+1 -1
View File
@@ -37,7 +37,7 @@ build_flags =
lib_deps =
${esp32s3_base.lib_deps}
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@1.2.19
lovyan03/LovyanGFX@1.2.21
[env:rak_wismesh_tap_v2-tft]
extends = env:rak_wismesh_tap_v2
variants/esp32s3/rak_wismesh_tap_v2/variant.h
+1 -1
View File
@@ -51,7 +51,7 @@
#define USE_VIRTUAL_KEYBOARD 1
#define BATTERY_PIN 1
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_0
#define ADC_MULTIPLIER 1.667
#define PIN_BUZZER 38
variants/esp32s3/seeed-sensecap-indicator/platformio.ini
+42 -11
View File
@@ -13,7 +13,8 @@ custom_meshtastic_has_mui = true
extends = esp32s3_base
platform_packages =
platformio/framework-arduinoespressif32 @ https://github.com/mverch67/arduino-esp32/archive/aef7fef6de3329ed6f75512d46d63bba12b09bb5.zip ; add_tca9535 (based on 2.0.16)
; Version needs to match the pioarduino version used in esp32_common.ini
platformio/framework-arduinoespressif32 @ https://github.com/mverch67/arduino-esp32#82aee17619ea2940de03b0db4d082d5def657771
board = seeed-sensecap-indicator
board_check = true
@@ -23,7 +24,7 @@ upload_protocol = esptool
build_flags = ${esp32s3_base.build_flags}
-Ivariants/esp32s3/seeed-sensecap-indicator
-DSENSECAP_INDICATOR
-DCONFIG_ARDUHAL_LOG_COLORS
-DUSE_ARDUINO_HAL_GPIO ; patch for lovyanGFX to use digitalWrite instead of direct register access for GPIO control, which is necessary for the IO expander to work correctly
-DRADIOLIB_DEBUG_SPI=0
-DRADIOLIB_DEBUG_PROTOCOL=0
-DRADIOLIB_DEBUG_BASIC=0
@@ -32,19 +33,48 @@ build_flags = ${esp32s3_base.build_flags}
-DIO_EXPANDER=0x40
-DIO_EXPANDER_IRQ=42
;-DIO_EXPANDER_DEBUG
-DUSE_ARDUINO_HAL_GPIO
lib_deps = ${esp32s3_base.lib_deps}
; TODO switch back to official LovyanGFX
https://github.com/mverch67/LovyanGFX/archive/4c76238c1344162a234ae917b27651af146d6fb2.zip
https://github.com/mverch67/LovyanGFX/archive/9abe502add013f392a1898d7dc48d65ddc112754.zip
# renovate: datasource=git-refs depName=ESP8266Audio packageName=https://github.com/meshtastic/ESP8266Audio gitBranch=meshtastic-2.0.0-dacfix
https://github.com/meshtastic/ESP8266Audio/archive/343024632ee78d6216907b2353fc943a62422d80.zip
# renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
earlephilhower/ESP8266SAM@1.1.0
custom_sdkconfig =
${esp32s3_base.custom_sdkconfig}
CONFIG_AUTOSTART_ARDUINO=y
CONFIG_LOG_DEFAULT_LEVEL_INFO=y
CONFIG_LOG_MAXIMUM_LEVEL_DEBUG=y
CONFIG_SPIRAM_MODE_OCT=y
; CONFIG_SPIRAM_SPEED_120M=y
; CONFIG_SPIRAM_SPEED=120
CONFIG_SPIRAM_SPEED_80M=y
CONFIG_SPIRAM_SPEED=80
CONFIG_SPIRAM_XIP_FROM_PSRAM=y
CONFIG_LCD_RGB_ISR_IRAM_SAFE=y
CONFIG_GDMA_CTRL_FUNC_IN_IRAM=y
CONFIG_I2S_ISR_IRAM_SAFE=y
CONFIG_GDMA_ISR_IRAM_SAFE=y
CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240=y
CONFIG_ESP32S3_DATA_CACHE_64KB=y
CONFIG_ESP32S3_DATA_CACHE_LINE_64B=y
CONFIG_I2C_SKIP_LEGACY_CONFLICT_CHECK=y
CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=0
CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y
CONFIG_ESPTOOLPY_FLASHSIZE="8MB"
; CONFIG_ESPTOOLPY_FLASHFREQ_120M=y
; CONFIG_ESPTOOLPY_FLASHFREQ="120m"
'# CONFIG_ESPTOOLPY_FLASHFREQ_120M is not set'
CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
CONFIG_ESPTOOLPY_FLASHFREQ="80m"
CONFIG_COMPILER_OPTIMIZATION_PERF=y
CONFIG_BOOTLOADER_LOG_LEVEL_NONE=n
CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y
[env:seeed-sensecap-indicator-tft]
extends = env:seeed-sensecap-indicator
board_level = pr
board_check = true
upload_speed = 460800
build_flags =
@@ -54,10 +84,10 @@ build_flags =
-D HAS_SCREEN=1
-D HAS_TFT=1
-D DISPLAY_SET_RESOLUTION
-D RAM_SIZE=4096
-D LV_LVGL_H_INCLUDE_SIMPLE
-D LV_CONF_INCLUDE_SIMPLE
-D LV_COMP_CONF_INCLUDE_SIMPLE
-D RAM_SIZE=3072
-D LV_LVGL_H_INCLUDE_SIMPLE
-D LV_CONF_INCLUDE_SIMPLE
-D LV_COMP_CONF_INCLUDE_SIMPLE
-D LV_USE_SYSMON=0
-D LV_USE_PROFILER=0
-D LV_USE_PERF_MONITOR=0
@@ -77,5 +107,6 @@ build_flags =
lib_deps =
${env:seeed-sensecap-indicator.lib_deps}
${device-ui_base.lib_deps}
; TODO switch back to official bb_captouch
;# renovate: datasource=github-tags depName=bb_captouch packageName=bitbank2/bb_captouch
;https://github.com/bitbank2/bb_captouch/archive/refs/tags/1.3.1.zip ; not working
https://github.com/mverch67/bb_captouch/archive/8626412fe650d808a267791c0eae6e5860c85a5d.zip ; alternative touch library supporting FT6x36
variants/esp32s3/seeed-sensecap-indicator/variant.h
+3 -3
View File
@@ -4,7 +4,7 @@
// This board has a serial coprocessor for sensor readings
#define SENSOR_RP2040_TXD 19
#define SENSOR_RP2040_RXD 20
#define SENSOR_PORT_NUM 2
#define SENSOR_PORT_NUM UART_NUM_2
#define SENSOR_BAUD_RATE 115200
#define BUTTON_PIN 38
@@ -14,7 +14,7 @@
// #define BUTTON_NEED_PULLUP
// #define BATTERY_PIN 27 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
// #define ADC_CHANNEL ADC1_GPIO27_CHANNEL
// #define ADC_CHANNEL ADC2_GPIO27_CHANNEL
// #define ADC_MULTIPLIER 2
// ST7701 TFT LCD
@@ -36,7 +36,7 @@
#define TFT_OFFSET_ROTATION 0
#define TFT_BL 45
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5 // fps
#define SCREEN_TRANSITION_FRAMERATE 30 // fps
#define USE_TFTDISPLAY 1
#define HAS_TOUCHSCREEN 1
variants/esp32s3/seeed_xiao_s3/platformio.ini
-4
View File
@@ -17,12 +17,8 @@ board_check = true
board_build.partitions = default_8MB.csv
upload_protocol = esptool
upload_speed = 921600
build_unflags =
${esp32s3_base.build_unflags}
-DARDUINO_USB_MODE=1
build_flags =
${esp32s3_base.build_flags}
-D SEEED_XIAO_S3
-I variants/esp32s3/seeed_xiao_s3
-DBOARD_HAS_PSRAM
-DARDUINO_USB_MODE=0
variants/esp32s3/seeed_xiao_s3/variant.h
+1 -1
View File
@@ -37,7 +37,7 @@ L76K GPS Module Information : https://www.seeedstudio.com/L76K-GNSS-Module-for-S
#define BUTTON_NEED_PULLUP
#define BATTERY_PIN -1
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_0
#define BATTERY_SENSE_RESOLUTION_BITS 12
/*Warning:
variants/esp32s3/station-common/station_common.h
+38
View File
@@ -0,0 +1,38 @@
// Shared pin/feature defines for BQ Station G2 and G3.
// Boards differ only in PA output power (SX126X_MAX_POWER) and the wiki URL.
#pragma once
// Station G2/G3 may not have GPS installed, but have a GROVE GPS Socket for an optional GPS module
#define GPS_RX_PIN 7
#define GPS_TX_PIN 15
// 1.3 inch OLED Screen
#define USE_SH1107_128_64
#define I2C_SDA 5
#define I2C_SCL 6
#define BUTTON_PIN 38 // Program button
#define BUTTON_NEED_PULLUP
#define USE_SX1262
#define LORA_MISO 14
#define LORA_SCK 12
#define LORA_MOSI 13
#define LORA_CS 11
#define LORA_RESET 21
#define LORA_DIO1 48
#ifdef USE_SX1262
#define SX126X_CS LORA_CS // Compatibility alias; prefer LORA_CS in board definitions.
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY 47
#define SX126X_RESET LORA_RESET
// DIO2 controls an antenna switch and the TCXO voltage is controlled by DIO3
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// NOTE: SX126X_MAX_POWER is intentionally NOT defined here — each board sets it.
#endif
variants/esp32s3/station-g2/pins_arduino.h
Regular → Executable
View File
variants/esp32s3/station-g2/platformio.ini
Regular → Executable
+2 -1
View File
@@ -22,10 +22,11 @@ upload_speed = 921600
build_unflags =
${esp32s3_base.build_unflags}
-DARDUINO_USB_MODE=0
build_flags =
build_flags =
${esp32s3_base.build_flags}
-D STATION_G2
-I variants/esp32s3/station-g2
-I variants/esp32s3/station-common
-DBOARD_HAS_PSRAM
-DSTATION_G2
-DARDUINO_USB_MODE=1
variants/esp32s3/station-g2/variant.h
Regular → Executable
+2 -32
View File
@@ -2,39 +2,9 @@
Board Information: https://wiki.uniteng.com/en/meshtastic/station-g2
*/
// Station G2 may not have GPS installed, but it has a GROVE GPS Socket for Optional GPS Module
#define GPS_RX_PIN 7
#define GPS_TX_PIN 15
// Station G2 has 1.3 inch OLED Screen
#define USE_SH1107_128_64
#define I2C_SDA 5 // I2C pins for this board
#define I2C_SCL 6
#define BUTTON_PIN 38 // This is the Program Button
#define BUTTON_NEED_PULLUP
#define USE_SX1262
#define LORA_MISO 14
#define LORA_SCK 12
#define LORA_MOSI 13
#define LORA_CS 11
#define LORA_RESET 21
#define LORA_DIO1 48
#include "station_common.h"
#ifdef USE_SX1262
#define SX126X_CS LORA_CS // FIXME - we really should define LORA_CS instead
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY 47
#define SX126X_RESET LORA_RESET
// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// Ensure the PA does not exceed the saturation output power. More
// Info:https://wiki.uniteng.com/en/meshtastic/station-g2#summary-for-lora-power-amplifier-conduction-test
#define SX126X_MAX_POWER 19
@@ -50,7 +20,7 @@ Board Information: https://wiki.uniteng.com/en/meshtastic/station-g2
/*
#define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
#define ADC_CHANNEL ADC_CHANNEL_3
#define ADC_MULTIPLIER 4
#define BATTERY_SENSE_SAMPLES 15 // Set the number of samples, It has an effect of increasing sensitivity.
#define BAT_FULLVOLT 8400
variants/esp32s3/station-g3/pins_arduino.h
+21
View File
@@ -0,0 +1,21 @@
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include <stdint.h>
#define USB_VID 0x303a
#define USB_PID 0x1001
// GPIO48 Reference: https://github.com/espressif/arduino-esp32/pull/8600
// The default Wire will be mapped to Screen and Sensors
static const uint8_t SDA = 5;
static const uint8_t SCL = 6;
// Default SPI will be mapped to Radio
static const uint8_t MISO = 14;
static const uint8_t SCK = 12;
static const uint8_t MOSI = 13;
static const uint8_t SS = 11;
#endif /* Pins_Arduino_h */
variants/esp32s3/station-g3/platformio.ini
+32
View File
@@ -0,0 +1,32 @@
[env:station-g3]
custom_meshtastic_hw_model = 134
custom_meshtastic_hw_model_slug = STATION_G3
custom_meshtastic_architecture = esp32-s3
custom_meshtastic_actively_supported = true
custom_meshtastic_support_level = 2
custom_meshtastic_display_name = Station G3
custom_meshtastic_images = station-g3.svg
custom_meshtastic_tags = B&Q
custom_meshtastic_requires_dfu = true
custom_meshtastic_partition_scheme = 16MB
extends = esp32s3_base
board = station-g3
board_level = pr
board_check = true
board_build.partitions = default_16MB.csv
board_build.mcu = esp32s3
upload_protocol = esptool
;upload_port = /dev/ttyACM0
upload_speed = 921600
build_unflags =
${esp32s3_base.build_unflags}
-DARDUINO_USB_MODE=0
build_flags =
${esp32s3_base.build_flags}
-D STATION_G3
-I variants/esp32s3/station-g3
-I variants/esp32s3/station-common
-DBOARD_HAS_PSRAM
-DSTATION_G3
-DARDUINO_USB_MODE=1

Some files were not shown because too many files have changed in this diff Show More