Merge branch 'develop' into thinknode-g3

2026-10-22 11:17:49 +10:00 · 2025-10-05 06:08:04 -05:00
parent 1bfeefb957 7c4367cddc
commit 7aa0af30f2
125 changed files with 2953 additions and 683 deletions
@@ -2,9 +2,9 @@
 extends = esp32s3_base
 board = heltec_v4
 board_check = true
+board_build.partitions = default_16MB.csv
 build_flags = 
  ${esp32s3_base.build_flags}
  -D HELTEC_V4
  -I variants/esp32s3/heltec_v4
  -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
-  -D SX126X_MAX_POWER=11
@@ -37,6 +37,7 @@
 #define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8

+#define USE_GC1109_PA   // We have a GC1109 power amplifier+attenuator
 #define LORA_PA_POWER 7 // power en
 #define LORA_PA_EN 2
 #define LORA_PA_TX_EN 46 // enable tx
@@ -0,0 +1,71 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include "soc/soc_caps.h"
+#include <stdint.h>
+
+#define DISPLAY_HEIGHT 80
+#define DISPLAY_WIDTH 160
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+static const uint8_t LED_BUILTIN = 18;
+#define BUILTIN_LED LED_BUILTIN // backward compatibility
+#define LED_BUILTIN LED_BUILTIN
+
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+static const uint8_t SDA = 5;
+static const uint8_t SCL = 6;
+
+static const uint8_t SS = 8;
+static const uint8_t MOSI = 10;
+static const uint8_t MISO = 11;
+static const uint8_t SCK = 9;
+
+static const uint8_t A0 = 1;
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 3;
+static const uint8_t A3 = 4;
+static const uint8_t A4 = 5;
+static const uint8_t A5 = 6;
+static const uint8_t A6 = 7;
+static const uint8_t A7 = 8;
+static const uint8_t A8 = 9;
+static const uint8_t A9 = 10;
+static const uint8_t A10 = 11;
+static const uint8_t A11 = 12;
+static const uint8_t A12 = 13;
+static const uint8_t A13 = 14;
+static const uint8_t A14 = 15;
+static const uint8_t A15 = 16;
+static const uint8_t A16 = 17;
+static const uint8_t A17 = 18;
+static const uint8_t A18 = 19;
+static const uint8_t A19 = 20;
+
+static const uint8_t T1 = 1;
+static const uint8_t T2 = 2;
+static const uint8_t T3 = 3;
+static const uint8_t T4 = 4;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+static const uint8_t T8 = 8;
+static const uint8_t T9 = 9;
+static const uint8_t T10 = 10;
+static const uint8_t T11 = 11;
+static const uint8_t T12 = 12;
+static const uint8_t T13 = 13;
+static const uint8_t T14 = 14;
+
+static const uint8_t Vext = 3;
+static const uint8_t LED = 18;
+
+static const uint8_t RST_LoRa = 12;
+static const uint8_t BUSY_LoRa = 13;
+static const uint8_t DIO0 = 14;
+
+#endif /* Pins_Arduino_h */
@@ -0,0 +1,14 @@
+[env:heltec-wireless-tracker-v2]
+extends = esp32s3_base
+board = heltec_wireless_tracker_v2
+board_build.partitions = default_8MB.csv
+upload_protocol = esptool
+
+build_flags = 
+  ${esp32s3_base.build_flags}
+  -I variants/esp32s3/heltec_wireless_tracker_v2
+  -D HELTEC_WIRELESS_TRACKER_V2
+  -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+lib_deps =
+  ${esp32s3_base.lib_deps}
+  lovyan03/LovyanGFX@^1.2.0
@@ -0,0 +1,78 @@
+#define LED_PIN 18
+
+#define _VARIANT_HELTEC_WIRELESS_TRACKER
+
+// I2C
+#define I2C_SDA SDA
+#define I2C_SCL SCL
+
+// ST7735S TFT LCD
+#define ST7735S 1 // there are different (sub-)versions of ST7735
+#define ST7735_CS 38
+#define ST7735_RS 40  // DC
+#define ST7735_SDA 42 // MOSI
+#define ST7735_SCK 41
+#define ST7735_RESET 39
+#define ST7735_MISO -1
+#define ST7735_BUSY -1
+#define TFT_BL 21
+#define ST7735_SPI_HOST SPI3_HOST
+#define SPI_FREQUENCY 40000000
+#define SPI_READ_FREQUENCY 16000000
+#define SCREEN_ROTATE
+#define TFT_HEIGHT DISPLAY_WIDTH
+#define TFT_WIDTH DISPLAY_HEIGHT
+#define TFT_OFFSET_X 24
+#define TFT_OFFSET_Y 0
+#define TFT_INVERT false
+#define SCREEN_TRANSITION_FRAMERATE 3 // fps
+#define DISPLAY_FORCE_SMALL_FONTS
+
+#define VEXT_ENABLE 3 // active HIGH - powers the GPS, GPS LNA and OLED
+#define VEXT_ON_VALUE HIGH
+#define BUTTON_PIN 0
+
+#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
+#define ADC_MULTIPLIER 4.9 * 1.045
+#define ADC_CTRL 2     // active HIGH, powers the voltage divider.
+#define ADC_USE_PULLUP // Use internal pullup/pulldown instead of actively driving the output
+
+#undef GPS_RX_PIN
+#undef GPS_TX_PIN
+#define GPS_RX_PIN 33
+#define GPS_TX_PIN 34
+#define PIN_GPS_RESET 35
+#define PIN_GPS_PPS 36
+// #define PIN_GPS_EN 3    // Uncomment to power off the GPS with triple-click on Tracker v2, though we'll also lose the
+// display.
+
+#define GPS_RESET_MODE LOW
+#define GPS_UC6580
+#define GPS_BAUDRATE 115200
+
+#define USE_SX1262
+#define LORA_DIO0 -1 // a No connect on the SX1262 module
+#define LORA_RESET 12
+#define LORA_DIO1 14 // SX1262 IRQ
+#define LORA_DIO2 13 // SX1262 BUSY
+#define LORA_DIO3    // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TCXO is enabled
+
+#define LORA_SCK 9
+#define LORA_MISO 11
+#define LORA_MOSI 10
+#define LORA_CS 8
+
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+#define USE_GC1109_PA   // We have a GC1109 power amplifier+attenuator
+#define LORA_PA_POWER 7 // power en
+#define LORA_PA_EN 4
+#define LORA_PA_TX_EN 46 // enable tx
@@ -15,7 +15,7 @@ build_flags = ${esp32s3_base.build_flags}
  -D SDCARD_USE_SPI1
  -D ENABLE_ROTARY_PULLUP
  -D ENABLE_BUTTON_PULLUP
-  -D HALF_STEP
+  -D ROTARY_BUXTRONICS

 lib_deps = ${esp32s3_base.lib_deps}
  lovyan03/LovyanGFX@1.2.7
@@ -26,7 +26,7 @@ lib_deps = ${esp32s3_base.lib_deps}
  lewisxhe/SensorLib@0.3.1
  https://github.com/pschatzmann/arduino-audio-driver/archive/refs/tags/v0.1.3.zip
  https://github.com/mverch67/BQ27220/archive/07d92be846abd8a0258a50c23198dac0858b22ed.zip
-  https://github.com/mverch67/RotaryEncoder/archive/25a59d5745a6645536f921427d80b08e78f886d4.zip
+  https://github.com/mverch67/RotaryEncoder/archive/da958a21389cbcd485989705df602a33e092dd88.zip

 [env:tlora-pager-tft]
 board_level = extra
@@ -40,28 +40,10 @@ build_flags = ${native_base.build_flags} -Os -lX11 -linput -lxkbcommon -ffunctio
  -D VIEW_320x240
  !pkg-config --libs libulfius --silence-errors || :
  !pkg-config --libs openssl --silence-errors || :
+  !pkg-config --cflags --libs sdl2 --silence-errors || :
 build_src_filter =
  ${native_base.build_src_filter}

-[env:native-sdl]
-extends = native_base
-build_type = release
-lib_deps =
-  ${env.lib_deps}
-  ${networking_base.lib_deps}
-  ${radiolib_base.lib_deps}
-  ${environmental_base.lib_deps}
-  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
-  # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
-  https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
-  # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
-	adafruit/Adafruit seesaw Library@1.7.9
-  https://github.com/jp-bennett/LovyanGFX/archive/7458f84a126c1f8fdc7b038074f71be903f6e4c0.zip
-build_flags = ${native_base.build_flags}
-  !pkg-config --cflags --libs sdl2 --silence-errors || :
-  -D LGFX_SDL=1
-
 [env:native-fb]
 extends = native_base
 build_type = release
@@ -6,7 +6,8 @@ board = gat562_mesh_trial_tracker
 board_check = true
 build_flags = ${nrf52840_base.build_flags}
  -I variants/nrf52840/gat562_mesh_trial_tracker
-  -D GAT562_MESH_TRIAL_TRACKER
+  ;-D GAT562_MESH_TRIAL_TRACKER
+  -D PRIVATE_HW
  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
  -DRADIOLIB_EXCLUDE_SX128X=1
  -DRADIOLIB_EXCLUDE_SX127X=1
@@ -0,0 +1,90 @@
+#pragma once
+
+#include "configuration.h"
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+// InkHUD-specific components
+// ---------------------------
+#include "graphics/niche/InkHUD/InkHUD.h"
+
+// Applets
+#include "graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/DM/DMApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/Heard/HeardApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/RecentsList/RecentsListApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h"
+
+// Shared NicheGraphics components
+// --------------------------------
+#include "graphics/niche/Drivers/EInk/E0213A367.h"
+#include "graphics/niche/Inputs/TwoButton.h"
+
+void setupNicheGraphics()
+{
+    using namespace NicheGraphics;
+
+    // SPI
+    // -----------------------------
+
+    // For NRF52 platforms, SPI pins are defined in variant.h
+    SPI1.begin();
+
+    // E-Ink Driver
+    // -----------------------------
+
+    Drivers::EInk *driver = new Drivers::E0213A367;
+    driver->begin(&SPI1, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY, PIN_EINK_RES);
+
+    // InkHUD
+    // ----------------------------
+
+    InkHUD::InkHUD *inkhud = InkHUD::InkHUD::getInstance();
+
+    // Set the E-Ink driver
+    inkhud->setDriver(driver);
+
+    // Set how many FAST updates per FULL update
+    // Set how unhealthy additional FAST updates beyond this number are
+    inkhud->setDisplayResilience(10, 1.5);
+
+    // Select fonts
+    InkHUD::Applet::fontLarge = FREESANS_12PT_WIN1252;
+    InkHUD::Applet::fontMedium = FREESANS_9PT_WIN1252;
+    InkHUD::Applet::fontSmall = FREESANS_6PT_WIN1252;
+
+    // Customize default settings
+    inkhud->persistence->settings.userTiles.maxCount = 2; // How many tiles can the display handle?
+    inkhud->persistence->settings.rotation = 3;           // 270 degrees clockwise
+    inkhud->persistence->settings.userTiles.count = 1;    // One tile only by default, keep things simple for new users
+    inkhud->persistence->settings.optionalMenuItems.nextTile = true;
+
+    // Pick applets
+    // Note: order of applets determines priority of "auto-show" feature
+    inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet, true, true); // Activated, autoshown
+    inkhud->addApplet("DMs", new InkHUD::DMApplet);                              // -
+    inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0));        // -
+    inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1));        // -
+    inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true);           // Activated
+    inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet);            // -
+    inkhud->addApplet("Heard", new InkHUD::HeardApplet, true, false, 0);         // Activated, no autoshow, default on tile 0
+
+    // Start running InkHUD
+    inkhud->begin();
+
+    // Buttons
+    // --------------------------
+
+    Inputs::TwoButton *buttons = Inputs::TwoButton::getInstance(); // Shared NicheGraphics component
+
+    // #0: Main User Button
+    buttons->setWiring(0, Inputs::TwoButton::getUserButtonPin());
+    buttons->setHandlerShortPress(0, [inkhud]() { inkhud->shortpress(); });
+    buttons->setHandlerLongPress(0, [inkhud]() { inkhud->longpress(); });
+
+    // Begin handling button events
+    buttons->start();
+}
+
+#endif
@@ -1,5 +1,5 @@
 ; First prototype nrf52840/sx1262 device
-[env:heltec-mesh-solar]
+[heltec_mesh_solar_base]
 extends = nrf52840_base
 board = heltec_mesh_solar
 board_level = pr
@@ -17,3 +17,100 @@ lib_deps =
  https://github.com/NMIoT/meshsolar/archive/dfc5330dad443982e6cdd37a61d33fc7252f468b.zip
  lewisxhe/PCF8563_Library@^1.0.1
  ArduinoJson@6.21.4
+[env:heltec-mesh-solar]
+extends = heltec_mesh_solar_base
+build_flags = ${heltec_mesh_solar_base.build_flags}
+    -DSPI_INTERFACES_COUNT=1
+
+[env:heltec-mesh-solar-eink]
+extends = heltec_mesh_solar_base
+build_flags = ${heltec_mesh_solar_base.build_flags}
+  -DHELTEC_MESH_SOLAR_EINK
+  -DSPI_INTERFACES_COUNT=2
+  -DUSE_EINK
+  -DPIN_SCREEN_VDD_CTL=3
+  -DPIN_EINK_CS=41
+  -DPIN_EINK_BUSY=11
+  -DPIN_EINK_DC=13
+  -DPIN_EINK_RES=40
+  -DPIN_EINK_SCLK=12
+  -DPIN_EINK_MOSI=2
+  -DPIN_SPI1_MISO=-1
+  -DPIN_SPI1_MOSI=PIN_EINK_MOSI
+  -DPIN_SPI1_SCK=PIN_EINK_SCLK
+  -DEINK_DISPLAY_MODEL=GxEPD2_213_E0213A367
+  -DEINK_WIDTH=250
+  -DEINK_HEIGHT=122
+  -DUSE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
+  -DEINK_LIMIT_FASTREFRESH=10          ; How many consecutive fast-refreshes are permitted
+  -DEINK_LIMIT_RATE_BACKGROUND_SEC=30  ; Minimum interval between BACKGROUND updates
+  -DEINK_LIMIT_RATE_RESPONSIVE_SEC=1   ; Minimum interval between RESPONSIVE updates
+  -DEINK_BACKGROUND_USES_FAST          ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
+  -DEINK_HASQUIRK_GHOSTING             ; Display model is identified as "prone to ghosting"
+lib_deps =
+  ${heltec_mesh_solar_base.lib_deps}
+  https://github.com/meshtastic/GxEPD2/archive/a05c11c02862624266b61599b0d6ba93e33c6f24.zip
+
+[env:heltec-mesh-solar-inkhud]
+extends = heltec_mesh_solar_base, inkhud
+build_src_filter = ${heltec_mesh_solar_base.build_src_filter} ${inkhud.build_src_filter}
+build_flags = ${heltec_mesh_solar_base.build_flags}
+  ${inkhud.build_flags}
+  -DHELTEC_MESH_SOLAR_INKHUD
+  -DSPI_INTERFACES_COUNT=2
+  -DPIN_SCREEN_VDD_CTL=3
+  -DPIN_EINK_CS=41
+  -DPIN_EINK_BUSY=11
+  -DPIN_EINK_DC=13
+  -DPIN_EINK_RES=40
+  -DPIN_EINK_SCLK=12
+  -DPIN_EINK_MOSI=2
+  -DPIN_SPI1_MISO=-1
+  -DPIN_SPI1_MOSI=PIN_EINK_MOSI
+  -DPIN_SPI1_SCK=PIN_EINK_SCLK
+lib_deps =
+  ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
+  ${heltec_mesh_solar_base.lib_deps}
+
+
+[env:heltec-mesh-solar-oled]
+extends = heltec_mesh_solar_base
+build_flags = ${heltec_mesh_solar_base.build_flags}
+  -DHELTEC_MESH_SOLAR_OLED
+  -DSPI_INTERFACES_COUNT=1
+  -DPIN_SCREEN_VDD_CTL=3
+  -DHAS_SCREEN=1
+  -DRESET_OLED=40
+  -DPIN_WIRE_SDA=2
+  -DPIN_WIRE_SCL=12
+
+[env:heltec-mesh-solar-tft]
+extends = heltec_mesh_solar_base
+build_flags = ${heltec_mesh_solar_base.build_flags}
+  -DHELTEC_MESH_SOLAR_TFT
+  -DSPI_INTERFACES_COUNT=2
+  -DUSE_ST7789
+  -DST7789_NSS=41
+  -DST7789_RS=13
+  -DST7789_SDA=2
+  -DST7789_SCK=12
+  -DST7789_RESET=40
+  -DST7789_MISO=-1
+  -DST7789_BUSY=-1
+  -DVTFT_CTRL=3
+  -DVTFT_LEDA=11
+  -DTFT_BACKLIGHT_ON=HIGH
+  -DST7789_SPI_HOST=SPI2_HOST
+  -DSPI_FREQUENCY=10000000
+  -DSPI_READ_FREQUENCY=10000000
+  -DTFT_HEIGHT=170
+  -DTFT_WIDTH=320
+  -DTFT_OFFSET_X=0
+  -DTFT_OFFSET_Y=0
+  -DBRIGHTNESS_DEFAULT=100
+  -DPIN_SPI1_MISO=ST7789_MISO
+  -DPIN_SPI1_MOSI=ST7789_SDA
+  -DPIN_SPI1_SCK=ST7789_SCK
+lib_deps =
+  ${heltec_mesh_solar_base.lib_deps}
+  https://github.com/meshtastic/st7789/archive/bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f.zip
@@ -32,5 +32,9 @@ const uint32_t g_ADigitalPinMap[] = {

 void initVariant()
 {
-  pinMode(BQ4050_EMERGENCY_SHUTDOWN_PIN, INPUT);
+    pinMode(BQ4050_EMERGENCY_SHUTDOWN_PIN, INPUT);
+#if defined(PIN_SCREEN_VDD_CTL)
+    pinMode(PIN_SCREEN_VDD_CTL, OUTPUT);
+    digitalWrite(PIN_SCREEN_VDD_CTL, LOW); // Start with power on
+#endif
 }
@@ -39,16 +39,15 @@ extern "C" {
 #define NUM_ANALOG_INPUTS (1)
 #define NUM_ANALOG_OUTPUTS (0)

-
-#define PIN_LED1 (0 + 12) // green (confirmed on 1.0 board)
+#define PIN_LED1 (0 + 4)  // green (confirmed on 1.0 board)
 #define LED_BLUE PIN_LED1 // fake for bluefruit library
 #define LED_GREEN PIN_LED1
 #define LED_BUILTIN LED_GREEN
-#define LED_STATE_ON 0  // State when LED is lit
+#define LED_STATE_ON 0 // State when LED is lit

 #define HAS_NEOPIXEL                         // Enable the use of neopixels
 #define NEOPIXEL_COUNT 1                     // How many neopixels are connected
-#define NEOPIXEL_DATA (32+15)                // gpio pin used to send data to the neopixels
+#define NEOPIXEL_DATA (32 + 15)              // gpio pin used to send data to the neopixels
 #define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use

 /*
@@ -63,7 +62,6 @@ No longer populated on PCB
 */
 #define PIN_SERIAL2_RX (0 + 9)
 #define PIN_SERIAL2_TX (0 + 10)
-//  #define PIN_SERIAL2_EN (0 + 17)

 /*
 * I2C
@@ -71,16 +69,16 @@ No longer populated on PCB

 #define WIRE_INTERFACES_COUNT 2

+#ifndef HELTEC_MESH_SOLAR_OLED
 // I2C bus 0
-// Routed to footprint for PCF8563TS RTC
-// Not populated on T114 V1, maybe in future?
-#define PIN_WIRE_SDA (0 + 6) // P0.26
-#define PIN_WIRE_SCL (0 + 26) // P0.26
+#define PIN_WIRE_SDA (0 + 6)
+#define PIN_WIRE_SCL (0 + 26)
+#endif

 // I2C bus 1
 // Available on header pins, for general use
-#define PIN_WIRE1_SDA (0 + 30) // P0.30
-#define PIN_WIRE1_SCL (0 + 5) // P0.13
+#define PIN_WIRE1_SDA (0 + 30)
+#define PIN_WIRE1_SCL (0 + 5)

 /*
 * Lora radio
@@ -89,14 +87,14 @@ No longer populated on PCB
 #define USE_SX1262
 // #define USE_SX1268
 #define SX126X_CS (0 + 24) // FIXME - we really should define LORA_CS instead
-#define LORA_CS  (0 + 24)
+#define LORA_CS (0 + 24)
 #define SX126X_DIO1 (0 + 20)
 // Note DIO2 is attached internally to the module to an analog switch for TX/RX switching
 // #define SX1262_DIO3 (0 + 21)
 // This is used as an *output* from the sx1262 and connected internally to power the tcxo, do not drive from the
 //    main
 // CPU?
-#define SX126X_BUSY  (0 + 17)
+#define SX126X_BUSY (0 + 17)
 #define SX126X_RESET (0 + 25)
 // Not really an E22 but TTGO seems to be trying to clone that
 #define SX126X_DIO2_AS_RF_SWITCH
@@ -129,21 +127,20 @@ No longer populated on PCB
 /*
 * SPI Interfaces
 */
-#define SPI_INTERFACES_COUNT 1

 // For LORA, spi 0
 #define PIN_SPI_MISO (0 + 23)
 #define PIN_SPI_MOSI (0 + 22)
-#define PIN_SPI_SCK  (0 + 19)
+#define PIN_SPI_SCK (0 + 19)

 // #define PIN_PWR_EN (0 + 6)

 // To debug via the segger JLINK console rather than the CDC-ACM serial device
 // #define USE_SEGGER

-#define BQ4050_SDA_PIN                      (32+1) // I2C data line pin
-#define BQ4050_SCL_PIN                      (32+0) // I2C clock line pin
-#define BQ4050_EMERGENCY_SHUTDOWN_PIN       (32+3) // Emergency shutdown pin
+#define BQ4050_SDA_PIN (32 + 1)                // I2C data line pin
+#define BQ4050_SCL_PIN (32 + 0)                // I2C clock line pin
+#define BQ4050_EMERGENCY_SHUTDOWN_PIN (32 + 3) // Emergency shutdown pin

 #define HAS_RTC 0
 #ifdef __cplusplus
@@ -0,0 +1,19 @@
+; The R1 Neo board
+[env:r1-neo]
+extends = nrf52840_base
+board = r1-neo
+board_check = true
+build_flags = ${nrf52840_base.build_flags}
+  -Ivariants/nrf52840/r1-neo
+  -D R1_NEO
+  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_LR11X0=1
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/r1-neo> +<mesh/api/> +<mqtt/>
+lib_deps = 
+  ${nrf52840_base.lib_deps}
+  ${networking_base.lib_deps}
+  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
+  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
+  artronshop/ArtronShop_RX8130CE@1.0.0
@@ -0,0 +1,45 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include "variant.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+    // P0
+    0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+
+    // P1
+    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
+
+void initVariant()
+{
+    // LED1 & LED2
+    pinMode(PIN_LED1, OUTPUT);
+    ledOff(PIN_LED1);
+
+    pinMode(PIN_LED2, OUTPUT);
+    ledOff(PIN_LED2);
+
+    // 3V3 Power Rail
+    // pinMode(PIN_3V3_EN, OUTPUT);
+    // digitalWrite(PIN_3V3_EN, HIGH);
+}
@@ -0,0 +1,149 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_R1NEO_
+#define _VARIANT_R1NEO_
+
+#define RAK4630
+
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+#define USE_LFXO // Board uses 32khz crystal for LF
+// define USE_LFRC    // Board uses RC for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+// Number of pins defined in PinDescription array
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (1)
+#define NUM_ANALOG_OUTPUTS (0)
+
+// LEDs
+#define PIN_LED1 (32 + 4) // P1.04 Controls Green LED
+#define PIN_LED2 (28)     // P0.28 Controls Blue LED
+
+#define LED_BUILTIN PIN_LED1
+#define LED_CONN PIN_LED2
+
+#define LED_GREEN PIN_LED1
+#define LED_BLUE PIN_LED2
+
+#define LED_STATE_ON 1 // State when LED is litted
+
+// Button
+#define PIN_BUTTON1 (26)
+#define BUTTON_ACTIVE_LOW 0
+#define BUTTON_ACTIVE_PULLUP 0
+#define BUTTON_SENSE_TYPE INPUT_SENSE_HIGH
+
+#define ADC_RESOLUTION 14
+
+// Serial for GPS
+#define PIN_SERIAL1_RX (25)
+#define PIN_SERIAL1_TX (24)
+
+// Connected to Jlink CDC
+#define PIN_SERIAL2_RX (8)
+#define PIN_SERIAL2_TX (6)
+
+/*
+ * SPI Interfaces
+ */
+#define SPI_INTERFACES_COUNT 1
+
+#define PIN_SPI_MISO (45)
+#define PIN_SPI_MOSI (44)
+#define PIN_SPI_SCK (43)
+
+static const uint8_t SS = 42;
+static const uint8_t MOSI = PIN_SPI_MOSI;
+static const uint8_t MISO = PIN_SPI_MISO;
+static const uint8_t SCK = PIN_SPI_SCK;
+
+// R1 Neo Extras
+#define DCDC_EN_HOLD (13) // P0.13 Keeps DCDC alive after user button  is pressed
+#define NRF_ON (29)       // P0.29 Tells IO controller device is on
+
+// RAKRGB
+#define HAS_NCP5623
+
+#define HAS_SCREEN 0
+
+/*
+ * Wire Interfaces
+ */
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_WIRE_SDA (19) // P0.19 RTC_SDA
+#define PIN_WIRE_SCL (20) // P0.20 RTC_SCL
+
+#define PIN_BUZZER (0 + 3) // P0.03
+
+#define USE_SX1262
+#define SX126X_CS (42)
+#define SX126X_DIO1 (47)
+#define SX126X_BUSY (46)
+#define SX126X_RESET (38)
+#define SX126X_POWER_EN (37)
+
+// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+// Testing USB detection
+#define NRF_APM
+
+#define PIN_GPS_EN (32 + 1) // P1.01
+#define PIN_GPS_PPS (2)     // P0.02 Pulse per second input from the GPS
+
+#define GPS_RX_PIN PIN_SERIAL1_RX
+#define GPS_TX_PIN PIN_SERIAL1_TX
+
+// Battery
+#define BATTERY_PIN (0 + 31) // P0.31 ADC_VBAT
+// and has 12 bit resolution
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER 1.73
+
+#define HAS_RTC 1
+
+#define RX8130CE_RTC 0x32
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#endif
@@ -140,11 +140,12 @@ static const uint8_t A0 = PIN_A0;
 #define HAS_GPS 1
 // #define PIN_GPS_REINIT (32 + 5) // An output to reset L76K GPS. As per datasheet, low for > 100ms will reset the L76K

-#define PIN_GPS_STANDBY (32 + 10) // An output to wake GPS, low means allow sleep, high means force wake
-// Seems to be missing on this new board
-#define PIN_GPS_PPS (0 + 29) // Pulse per second input from the GPS
-#define GPS_TX_PIN (32 + 15) // This is for bits going TOWARDS the CPU
-#define GPS_RX_PIN (32 + 13) // This is for bits going TOWARDS the GPS
+#define PIN_GPS_EN (32 + 11) // GPS power
+#define GPS_EN_ACTIVE 1
+#define PIN_GPS_STANDBY (32 + 13) // wakeup pin
+#define PIN_GPS_PPS (32 + 15)
+#define GPS_TX_PIN (32 + 10) // L76K module RX PIN
+#define GPS_RX_PIN (0 + 29)  // L76K module TX PIN

 #define GPS_THREAD_INTERVAL 50

@@ -204,4 +205,4 @@ static const uint8_t A0 = PIN_A0;
 *        Arduino objects - C++ only
 *----------------------------------------------------------------------------*/

-#endif
+#endif