feat(variants): add Seeed Wio Tracker L1 Pro 1W (#11542)

* fix(sx126x): allow boards to opt out of the PA optimization table

Boards driving an external PA can define SX126X_NO_POWER_OPTIMIZATION_TABLE
to use the fixed PA config instead of RadioLib's table, which is tuned for a
bare SX126x.

Default behaviour is unchanged. init() applies the fixed config after begin(),
which programs power through the table.

* feat(variants): add Seeed Wio Tracker L1 Pro 1W

nRF52840 + SX1262 with a 1 W external PA, L76K GNSS, SH1106 OLED.

Uses hw_model 144 (meshtastic/protobufs#1038), opts into
SX126X_NO_POWER_OPTIMIZATION_TABLE and declares SX126X_MAX_POWER explicitly.
The PA gain table is indexed by SX1262 output power in dBm.

Requires protobufs#1038 and a protobuf regen before it builds.

* chore(deps): bump RadioLib to 510e00cf

Carries the current LR11x0 and LR2021 fixes.

* fix(variants): correct L1 Pro 1W QSPI pins and clean up comments

PIN_QSPI_* are logical pin indices. The QSPI flash sits at D19-D24 in
variant.cpp, but the defines carried D21-D26 from seeed_solar_node, where
that block does start at D21. D25 and D26 are trackball pins.

Also replaces mis-encoded characters in the pin comments and drops the
migration note, which referenced a private repo path and a stale PINS_COUNT.

* fix(variants): move L1 Pro 1W out of the per-PR build matrix

board_level = pr is the high-attention tier that builds on every PR. This
board belongs with the mainline set, which uses board_level = release.

platformio.ini

@@ -132,7 +132,7 @@ lib_deps =
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=github-tags depName=RadioLib packageName=jgromes/RadioLib
-	https://github.com/jgromes/RadioLib/archive/6d8934836678d8894e3d556550475b37dce3e2b6.zip
+	https://github.com/jgromes/RadioLib/archive/510e00cfb05bbc3c2b7b524262785454944adb6e.zip
 
 [device-ui_base]
 lib_deps =