Remove board_check (now using normal matrix) (#11312)

This was being misused / misunderstood (most were a no-op already).
2026-10-04 03:18:10 +10:00 · 2026-08-01 21:41:55 -04:00
parent 854eae456b
commit 8d3ad2a146
59 changed files with 16 additions and 97 deletions
@@ -12,7 +12,6 @@ custom_meshtastic_tags = DIY
 extends = esp32_base
 board_level = release
 board = esp32doit-devkit-v1
-board_check = true
 build_flags =
  ${esp32_base.build_flags}
  -D DIY_V1
@@ -2,7 +2,6 @@
 extends = esp32_base
 board_level = release
 board = m5stack-coreink
-board_check = true
 build_src_filter = 
  ${esp32_base.build_src_filter}
 build_flags = 
@@ -11,7 +11,6 @@ custom_meshtastic_tags = RAK
 extends = esp32_base
 board_level = release
 board = wiscore_rak11200
-board_check = true
 build_flags = 
  ${esp32_base.build_flags}
  -D RAK_11200
@@ -13,7 +13,6 @@ extends = esp32_base
 board_level = release
 board = ttgo-tbeam

-board_check = true
 build_flags = ${esp32_base.build_flags}
  -D TBEAM_V10
  -I variants/esp32/tbeam
@@ -11,7 +11,6 @@ custom_meshtastic_tags = LilyGo
 extends = esp32_base
 board_level = release
 board = ttgo-lora32-v21
-board_check = true
 build_flags = 
  ${esp32_base.build_flags} -D TLORA_V2_1_16 -I variants/esp32/tlora_v2_1_16
 upload_speed = 115200
@@ -2,7 +2,6 @@
 extends = esp32s2_base
 board = lolin_s2_mini
 board_level = extra
-board_check = true
 build_flags = 
  ${esp32s2_base.build_flags}
  -D PRIVATE_HW
@@ -1,7 +1,6 @@
 [crowpanel_base]
 extends = esp32s3_base
 board = crowpanel
-board_check = true
 upload_protocol = esptool
 board_build.partitions = default_16MB.csv ; must be here for some reason, board.json is not enough !?
 build_flags = ${esp32s3_base.build_flags} -Os
@@ -3,7 +3,6 @@
 extends = esp32s3_base
 board_level = release
 board = hackaday-communicator
-board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool

@@ -2,7 +2,6 @@
 extends = esp32s3_base
 board_level = release
 board = heltec_wifi_lora_32_V3
-board_check = true
 board_build.partitions = default_8MB.csv
 build_flags = 
  ${esp32s3_base.build_flags} -I variants/esp32s3/heltec_capsule_sensor_v3
@@ -2,7 +2,6 @@
 extends = esp32s3_base
 board_level = release
 board = heltec_wifi_lora_32_V3
-board_check = true

 build_flags = 
  ${esp32s3_base.build_flags}
@@ -12,7 +12,6 @@ custom_meshtastic_partition_scheme = 8MB
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
 board_level = pr
-board_check = true
 board_build.partitions = default_8MB.csv
 build_flags = 
  ${esp32s3_base.build_flags}
@@ -1,7 +1,6 @@
 [heltec_v4_base] 
 extends = esp32s3_base
 board = heltec_v4
-board_check = true
 board_build.partitions = default_16MB.csv
 build_flags = 
  ${esp32s3_base.build_flags}
@@ -1,7 +1,6 @@
 [heltec_v4_r8_base] 
 extends = esp32s3_base
 board = heltec_v4_r8
-board_check = true
 board_build.partitions = default_16MB.csv
 build_flags = 
  ${esp32s3_base.build_flags}
@@ -2,7 +2,6 @@
 extends = esp32s3_base
 board = icarus
 board_level = extra
-board_check = true
 board_build.mcu = esp32s3
 board_build.partitions = default_8MB.csv
 upload_protocol = esptool
@@ -3,7 +3,6 @@
 extends = esp32s3_base
 board_level = release
 board = m5stack-stamps3
-board_check = true
 board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 build_flags = 
@@ -3,7 +3,6 @@
 extends = esp32s3_base
 board_level = release
 board = m5stack-cores3
-board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool
 build_flags = 
@@ -13,7 +13,6 @@ custom_meshtastic_has_mui = false
 extends = esp32s3_base
 board_level = release
 board = mini-epaper-s3
-board_check = true
 upload_protocol = esptool

 build_flags = 
@@ -40,7 +39,6 @@ lib_deps =
 extends = esp32s3_base, inkhud
 board_level = release
 board = mini-epaper-s3
-board_check = true
 upload_protocol = esptool
 build_src_filter =
  ${esp32s3_base.build_src_filter}
@@ -11,7 +11,6 @@ custom_meshtastic_has_mui = true
 extends = esp32s3_base
 board_level = release
 board = bpi_picow_esp32_s3
-board_check = true
 board_build.partitions = partition-table-8MB.csv
 ;OpenOCD flash method
 ;upload_protocol = esp-builtin
@@ -14,7 +14,6 @@ custom_meshtastic_has_mui = false
 extends = esp32s3_base
 board_level = release
 board = wiscore_rak3312
-board_check = true
 upload_protocol = esptool

 build_flags = 
@@ -25,7 +25,6 @@ custom_meshtastic_has_mui = true
 extends = esp32s3_base
 board_level = release
 board = wiscore_rak3312
-board_check = true
 upload_protocol = esptool
 board_build.partitions = default_16MB.csv

@@ -18,7 +18,6 @@ platform_packages =

 board = seeed-sensecap-indicator
 board_level = release
-board_check = true
 board_build.partitions = partition-table-8MB.csv
 upload_protocol = esptool

@@ -45,7 +44,6 @@ lib_deps = ${esp32s3_base.lib_deps}
 [env:seeed-sensecap-indicator-tft]
 extends = env:seeed-sensecap-indicator
 board_level = pr
-board_check = true
 upload_speed = 921600

 build_flags =
@@ -13,7 +13,6 @@ custom_meshtastic_partition_scheme = 8MB
 extends = esp32s3_base
 board_level = release
 board = seeed-xiao-s3
-board_check = true
 board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 upload_speed = 921600
@@ -13,7 +13,6 @@ custom_meshtastic_partition_scheme = 16MB
 extends = esp32s3_base
 board_level = release
 board = station-g2
-board_check = true
 board_build.partitions = default_16MB.csv
 board_build.mcu = esp32s3
 upload_protocol = esptool
@@ -13,7 +13,6 @@ custom_meshtastic_partition_scheme = 16MB
 extends = esp32s3_base
 board_level = release
 board = station-g3
-board_check = true
 board_build.partitions = default_16MB.csv
 board_build.mcu = esp32s3
 upload_protocol = esptool
@@ -14,7 +14,6 @@ extends = esp32s3_base
 board_level = release
 board = t-beam-1w
 board_build.partitions = default_8MB.csv
-board_check = true

 lib_deps =
  ${esp32s3_base.lib_deps}
@@ -13,7 +13,6 @@ extends = esp32s3_base
 board_level = release
 board = t-beam-bpf
 board_build.partitions = default_16MB.csv
-board_check = true

 lib_deps =
  ${esp32s3_base.lib_deps}
@@ -13,7 +13,6 @@ custom_meshtastic_partition_scheme = 16MB
 extends = esp32s3_base
 board_level = release
 board = t-deck-pro
-board_check = true
 upload_protocol = esptool

 build_flags = 
@@ -14,7 +14,6 @@ custom_meshtastic_has_mui = false
 extends = esp32s3_base
 board_level = release
 board = t-deck-pro
-board_check = true
 upload_protocol = esptool

 build_src_filter =
@@ -15,7 +15,6 @@ custom_meshtastic_has_mui = true
 extends = esp32s3_base
 board_level = release
 board = t-deck
-board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool

@@ -2,7 +2,6 @@
 extends = esp32s3_base
 board_level = release
 board = esp32s3box
-board_check = true
 board_build.partitions = default_16MB.csv
 build_flags = 
  ${esp32s3_base.build_flags}
@@ -13,7 +13,6 @@ custom_meshtastic_partition_scheme = 8MB
 extends = esp32s3_base
 board_level = release
 board = t-watch-s3
-board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool

@@ -2,7 +2,6 @@
 extends = esp32s3_base
 board = t5-epaper-s3
 board_build.partitions = default_16MB.csv
-board_check = true
 upload_protocol = esptool
 build_flags = -fno-strict-aliasing
  ${esp32s3_base.build_flags} 
@@ -39,7 +38,6 @@ custom_sdkconfig =
 [env:t5s3_epaper_inkhud]
 extends = t5s3_epaper_base, inkhud
 board_level = extra
-board_check = true
 build_flags =
  ${t5s3_epaper_base.build_flags}
  ${inkhud.build_flags}
@@ -15,7 +15,6 @@ extends = esp32s3_base
 board_level = release
 board = tbeam-s3-core
 board_build.partitions = default_8MB.csv
-board_check = true

 lib_deps =
  ${esp32s3_base.lib_deps}
@@ -15,7 +15,6 @@ custom_meshtastic_has_mui = true
 extends = esp32s3_base
 board_level = release
 board = t-deck-pro ; same as T-Deck Pro
-board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool

@@ -13,7 +13,6 @@ custom_meshtastic_has_ink_hud = true
 extends = esp32s3_base
 board_level = release
 board = tlora-t3s3-v1
-board_check = true
 board_build.partitions = partition-table-t3s3.csv
 upload_protocol = esptool

@@ -42,7 +41,6 @@ lib_deps =
 extends = esp32s3_base, inkhud
 board_level = release
 board = tlora-t3s3-v1
-board_check = true
 board_build.partitions = partition-table-t3s3.csv
 upload_protocol = esptool
 custom_sdkconfig =
@@ -12,7 +12,6 @@ custom_meshtastic_requires_dfu = true
 extends = esp32s3_base
 board_level = release
 board = tlora-t3s3-v1
-board_check = true
 board_build.partitions = partition-table-t3s3.csv
 upload_protocol = esptool

@@ -2,7 +2,6 @@
 [env:visualizer-hub75]
 extends = esp32s3_base
 board = esp32-s3-devkitc-1
-board_check = true
 board_build.partitions = default_16MB.csv
 board_level = extra
 board_upload.flash_size = 16MB          ; N16R8 -> 16MB flash
@@ -13,7 +13,6 @@ custom_meshtastic_has_ink_hud = true
 extends = nrf52840_base
 board_level = release
 board = ThinkNode-M1
-board_check = true
 debug_tool = jlink

 # add -DCFG_SYSVIEW if you want to use the Segger systemview tool for OS profiling.
@@ -44,7 +43,6 @@ lib_deps =
 extends = nrf52840_base, inkhud
 board_level = release
 board = ThinkNode-M1
-board_check = true
 debug_tool = jlink
 build_flags = 
  ${nrf52840_base.build_flags}
@@ -6,7 +6,6 @@ custom_meshtastic_tags = Elecrow
 extends = nrf52840_base
 board_level = release
 board = ThinkNode-M3
-board_check = true
 debug_tool = jlink
 custom_meshtastic_hw_model = 115
 custom_meshtastic_hw_model_slug = THINKNODE_M3
@@ -3,7 +3,6 @@
 extends = nrf52840_base
 board_level = release
 board = ThinkNode-M4
-board_check = true
 debug_tool = jlink

 build_flags = ${nrf52840_base.build_flags}
@@ -12,7 +12,6 @@ custom_meshtastic_tags = Elecrow
 extends = nrf52840_base
 board_level = release
 board = ThinkNode-M6
-board_check = true
 debug_tool = jlink

 build_flags = ${nrf52840_base.build_flags}
@@ -12,7 +12,6 @@ custom_meshtastic_actively_supported = true
 extends = nrf52840_base
 board_level = release
 board = ThinkNode-M8
-board_check = true
 debug_tool = jlink
 # add -DCFG_SYSVIEW if you want to use the Segger systemview tool for OS profiling.
 build_flags = 
@@ -3,7 +3,6 @@
 extends = nrf52840_base
 board_level = extra
 board = gat562_mesh_trial_tracker
-board_check = true
 build_flags = ${nrf52840_base.build_flags}
  -I variants/nrf52840/gat562_mesh_trial_tracker
  ;-D GAT562_MESH_TRIAL_TRACKER
@@ -2,7 +2,6 @@
 board_level = extra
 extends = nrf52840_base, inkhud
 board = heltec_mesh_node_t114
-board_check = true
 build_flags = 
  ${nrf52840_base.build_flags}
  ${inkhud.build_flags}
@@ -5,7 +5,6 @@
 extends = nrf52840_base
 board = meshlink
 board_level = extra
-;board_check = true
 build_flags = ${nrf52840_base.build_flags}
  -I variants/nrf52840/meshlink
  -D MESHLINK
@@ -24,7 +23,6 @@ debug_tool = jlink
 extends = nrf52840_base
 board = meshlink
 board_level = extra
-;board_check = true
 build_flags = ${nrf52840_base.build_flags}
  -I variants/nrf52840/meshlink
  -D MESHLINK
@@ -12,7 +12,6 @@ custom_meshtastic_tags = muzi
 extends = nrf52840_base
 board_level = release
 board = r1-neo
-board_check = true
 build_flags = ${nrf52840_base.build_flags}
  -Ivariants/nrf52840/r1-neo
  -D R1_NEO
@@ -12,7 +12,6 @@ custom_meshtastic_tags = RAK
 extends = nrf52840_base
 board_level = release
 board = wiscore_rak4631
-board_check = true
 build_flags = ${nrf52840_base.build_flags}
  -I variants/nrf52840/rak2560
  -D RAK_4631
@@ -13,7 +13,6 @@ custom_meshtastic_requires_dfu = true
 extends = nrf52840_base
 board_level = release
 board = wiscore_rak4631
-board_check = true
 build_flags = ${nrf52840_base.build_flags} 
  -Ivariants/nrf52840/rak3401_1watt
  -D RAK_4631
@@ -12,7 +12,6 @@ custom_meshtastic_tags = RAK
 extends = nrf52840_base
 board = wiscore_rak4631
 board_level = pr
-board_check = true
 build_type = release
 build_flags = ${nrf52840_base.build_flags}
  -I variants/nrf52840/rak4631
@@ -3,7 +3,6 @@
 extends = nrf52840_base
 board_level = release
 board = wiscore_rak4631
-board_check = true
 build_flags = ${nrf52840_base.build_flags}
  -I variants/nrf52840/rak4631_eth_gw
  -D RAK_4631
@@ -12,7 +12,6 @@ custom_meshtastic_tags = NomadStar
 extends = nrf52840_base
 board_level = release
 board = wiscore_rak4631
-board_check = true
 build_flags = ${nrf52840_base.build_flags}
  -I variants/nrf52840/rak4631_nomadstar_meteor_pro
  -D NOMADSTAR_METEOR_PRO
@@ -7,7 +7,6 @@ custom_meshtastic_tags = RAK
 extends = nrf52840_base
 board_level = release
 board = wiscore_rak4631
-board_check = true
 custom_meshtastic_hw_model = 105
 custom_meshtastic_hw_model_slug = WISMESH_TAG
 custom_meshtastic_architecture = nrf52840
@@ -12,7 +12,6 @@ custom_meshtastic_tags = LilyGo
 extends = nrf52840_base
 board_level = release
 board = t-echo
-board_check = true
 debug_tool = jlink

 # add -DCFG_SYSVIEW if you want to use the Segger systemview tool for OS profiling.
@@ -13,7 +13,6 @@ custom_meshtastic_has_ink_hud = true
 extends = nrf52840_base
 board = t-echo
 board_level = pr
-board_check = true
 debug_tool = jlink

 build_flags = ${nrf52840_base.build_flags}
@@ -13,7 +13,6 @@ custom_meshtastic_has_ink_hud = true
 extends = nrf52840_base
 board_level = release
 board = t-echo
-board_check = true
 debug_tool = jlink

 # add -DCFG_SYSVIEW if you want to use the Segger systemview tool for OS profiling.
@@ -40,7 +39,6 @@ lib_deps =
 extends = nrf52840_base, inkhud
 board_level = release
 board = t-echo
-board_check = true
 debug_tool = jlink
 build_flags = 
  ${nrf52840_base.build_flags}
@@ -12,7 +12,6 @@ custom_meshtastic_requires_dfu = true
 extends = rp2040_base
 board = rpipicow
 board_level = pr
-board_check = true
 upload_protocol = picotool
 # add our variants files to the include and src paths
 build_flags = 
@@ -2,7 +2,6 @@
 extends = rp2350_base
 board = rpipico2w
 board_level = pr
-board_check = true
 upload_protocol = jlink
 # debug settings for external openocd with RP2040 support (custom build)
 debug_tool = custom