ElixirForge/firmware
1
0
Fork 0
mirror of https://github.com/alexhopeoconnor/firmware.git synced 2026-10-22 11:17:49 +10:00
Code Releases Activity

Merge branch 'master' into crowpanelV2

Browse Source
This commit is contained in:
Manuel
2025-09-28 00:30:03 +02:00
committed by GitHub
parent fbf32b93b6 2b60bae61c
commit c15b6de138
99 changed files with 2361 additions and 428 deletions
Download Patch File Download Diff File Expand all files Collapse all files
variants/esp32s3/heltec_v3/variant.h
+2
View File
@@ -40,3 +40,5 @@
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define HAS_32768HZ 1
variants/esp32s3/heltec_v4/platformio.ini
+1
View File
@@ -2,6 +2,7 @@
extends = esp32s3_base
board = heltec_v4
board_check = true
board_build.partitions = default_16MB.csv
build_flags =
${esp32s3_base.build_flags}
-D HELTEC_V4
variants/esp32s3/picomputer-s3/platformio.ini
+1
View File
@@ -26,6 +26,7 @@ extends = env:picomputer-s3
build_flags =
${env:picomputer-s3.build_flags}
-D MESHTASTIC_EXCLUDE_WEBSERVER=1
-D INPUTDRIVER_MATRIX_TYPE=1
-D USE_PIN_BUZZER=PIN_BUZZER
-D USE_SX127x
variants/esp32s3/tbeam-s3-core/variant.h
+2 -2
View File
@@ -62,6 +62,6 @@
// #define PCF8563_RTC 0x51 //Putting definitions in variant. h does not compile correctly
// has 32768 Hz crystal
#define HAS_32768HZ
#define HAS_32768HZ 1
#define USE_SH1106
#define USE_SH1106
variants/nrf52840/heltec_mesh_solar/nicheGraphics.h
+90
View File
@@ -0,0 +1,90 @@
#pragma once
#include "configuration.h"
#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
// InkHUD-specific components
// ---------------------------
#include "graphics/niche/InkHUD/InkHUD.h"
// Applets
#include "graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h"
#include "graphics/niche/InkHUD/Applets/User/DM/DMApplet.h"
#include "graphics/niche/InkHUD/Applets/User/Heard/HeardApplet.h"
#include "graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h"
#include "graphics/niche/InkHUD/Applets/User/RecentsList/RecentsListApplet.h"
#include "graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h"
// Shared NicheGraphics components
// --------------------------------
#include "graphics/niche/Drivers/EInk/E0213A367.h"
#include "graphics/niche/Inputs/TwoButton.h"
void setupNicheGraphics()
{
using namespace NicheGraphics;
// SPI
// -----------------------------
// For NRF52 platforms, SPI pins are defined in variant.h
SPI1.begin();
// E-Ink Driver
// -----------------------------
Drivers::EInk *driver = new Drivers::E0213A367;
driver->begin(&SPI1, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY, PIN_EINK_RES);
// InkHUD
// ----------------------------
InkHUD::InkHUD *inkhud = InkHUD::InkHUD::getInstance();
// Set the E-Ink driver
inkhud->setDriver(driver);
// Set how many FAST updates per FULL update
// Set how unhealthy additional FAST updates beyond this number are
inkhud->setDisplayResilience(10, 1.5);
// Select fonts
InkHUD::Applet::fontLarge = FREESANS_12PT_WIN1252;
InkHUD::Applet::fontMedium = FREESANS_9PT_WIN1252;
InkHUD::Applet::fontSmall = FREESANS_6PT_WIN1252;
// Customize default settings
inkhud->persistence->settings.userTiles.maxCount = 2; // How many tiles can the display handle?
inkhud->persistence->settings.rotation = 3; // 270 degrees clockwise
inkhud->persistence->settings.userTiles.count = 1; // One tile only by default, keep things simple for new users
inkhud->persistence->settings.optionalMenuItems.nextTile = true;
// Pick applets
// Note: order of applets determines priority of "auto-show" feature
inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet, true, true); // Activated, autoshown
inkhud->addApplet("DMs", new InkHUD::DMApplet); // -
inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0)); // -
inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1)); // -
inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true); // Activated
inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet); // -
inkhud->addApplet("Heard", new InkHUD::HeardApplet, true, false, 0); // Activated, no autoshow, default on tile 0
// Start running InkHUD
inkhud->begin();
// Buttons
// --------------------------
Inputs::TwoButton *buttons = Inputs::TwoButton::getInstance(); // Shared NicheGraphics component
// #0: Main User Button
buttons->setWiring(0, Inputs::TwoButton::getUserButtonPin());
buttons->setHandlerShortPress(0, [inkhud]() { inkhud->shortpress(); });
buttons->setHandlerLongPress(0, [inkhud]() { inkhud->longpress(); });
// Begin handling button events
buttons->start();
}
#endif
variants/nrf52840/heltec_mesh_solar/platformio.ini
+98 -1
View File
@@ -1,5 +1,5 @@
; First prototype nrf52840/sx1262 device
[env:heltec-mesh-solar]
[heltec_mesh_solar_base]
extends = nrf52840_base
board = heltec_mesh_solar
board_level = pr
@@ -17,3 +17,100 @@ lib_deps =
https://github.com/NMIoT/meshsolar/archive/dfc5330dad443982e6cdd37a61d33fc7252f468b.zip
lewisxhe/PCF8563_Library@^1.0.1
ArduinoJson@6.21.4
[env:heltec-mesh-solar]
extends = heltec_mesh_solar_base
build_flags = ${heltec_mesh_solar_base.build_flags}
-DSPI_INTERFACES_COUNT=1
[env:heltec-mesh-solar-eink]
extends = heltec_mesh_solar_base
build_flags = ${heltec_mesh_solar_base.build_flags}
-DHELTEC_MESH_SOLAR_EINK
-DSPI_INTERFACES_COUNT=2
-DUSE_EINK
-DPIN_SCREEN_VDD_CTL=3
-DPIN_EINK_CS=41
-DPIN_EINK_BUSY=11
-DPIN_EINK_DC=13
-DPIN_EINK_RES=40
-DPIN_EINK_SCLK=12
-DPIN_EINK_MOSI=2
-DPIN_SPI1_MISO=-1
-DPIN_SPI1_MOSI=PIN_EINK_MOSI
-DPIN_SPI1_SCK=PIN_EINK_SCLK
-DEINK_DISPLAY_MODEL=GxEPD2_213_E0213A367
-DEINK_WIDTH=250
-DEINK_HEIGHT=122
-DUSE_EINK_DYNAMICDISPLAY ; Enable Dynamic EInk
-DEINK_LIMIT_FASTREFRESH=10 ; How many consecutive fast-refreshes are permitted
-DEINK_LIMIT_RATE_BACKGROUND_SEC=30 ; Minimum interval between BACKGROUND updates
-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 ; Minimum interval between RESPONSIVE updates
-DEINK_BACKGROUND_USES_FAST ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
-DEINK_HASQUIRK_GHOSTING ; Display model is identified as "prone to ghosting"
lib_deps =
${heltec_mesh_solar_base.lib_deps}
https://github.com/meshtastic/GxEPD2/archive/a05c11c02862624266b61599b0d6ba93e33c6f24.zip
[env:heltec-mesh-solar-inkhud]
extends = heltec_mesh_solar_base, inkhud
build_src_filter = ${heltec_mesh_solar_base.build_src_filter} ${inkhud.build_src_filter}
build_flags = ${heltec_mesh_solar_base.build_flags}
${inkhud.build_flags}
-DHELTEC_MESH_SOLAR_INKHUD
-DSPI_INTERFACES_COUNT=2
-DPIN_SCREEN_VDD_CTL=3
-DPIN_EINK_CS=41
-DPIN_EINK_BUSY=11
-DPIN_EINK_DC=13
-DPIN_EINK_RES=40
-DPIN_EINK_SCLK=12
-DPIN_EINK_MOSI=2
-DPIN_SPI1_MISO=-1
-DPIN_SPI1_MOSI=PIN_EINK_MOSI
-DPIN_SPI1_SCK=PIN_EINK_SCLK
lib_deps =
${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
${heltec_mesh_solar_base.lib_deps}
[env:heltec-mesh-solar-oled]
extends = heltec_mesh_solar_base
build_flags = ${heltec_mesh_solar_base.build_flags}
-DHELTEC_MESH_SOLAR_OLED
-DSPI_INTERFACES_COUNT=1
-DPIN_SCREEN_VDD_CTL=3
-DHAS_SCREEN=1
-DRESET_OLED=40
-DPIN_WIRE_SDA=2
-DPIN_WIRE_SCL=12
[env:heltec-mesh-solar-tft]
extends = heltec_mesh_solar_base
build_flags = ${heltec_mesh_solar_base.build_flags}
-DHELTEC_MESH_SOLAR_TFT
-DSPI_INTERFACES_COUNT=2
-DUSE_ST7789
-DST7789_NSS=41
-DST7789_RS=13
-DST7789_SDA=2
-DST7789_SCK=12
-DST7789_RESET=40
-DST7789_MISO=-1
-DST7789_BUSY=-1
-DVTFT_CTRL=3
-DVTFT_LEDA=11
-DTFT_BACKLIGHT_ON=HIGH
-DST7789_SPI_HOST=SPI2_HOST
-DSPI_FREQUENCY=10000000
-DSPI_READ_FREQUENCY=10000000
-DTFT_HEIGHT=170
-DTFT_WIDTH=320
-DTFT_OFFSET_X=0
-DTFT_OFFSET_Y=0
-DBRIGHTNESS_DEFAULT=100
-DPIN_SPI1_MISO=ST7789_MISO
-DPIN_SPI1_MOSI=ST7789_SDA
-DPIN_SPI1_SCK=ST7789_SCK
lib_deps =
${heltec_mesh_solar_base.lib_deps}
https://github.com/meshtastic/st7789/archive/bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f.zip
variants/nrf52840/heltec_mesh_solar/variant.cpp
+5 -1
View File
@@ -32,5 +32,9 @@ const uint32_t g_ADigitalPinMap[] = {
void initVariant()
{
pinMode(BQ4050_EMERGENCY_SHUTDOWN_PIN, INPUT);
pinMode(BQ4050_EMERGENCY_SHUTDOWN_PIN, INPUT);
#if defined(PIN_SCREEN_VDD_CTL)
pinMode(PIN_SCREEN_VDD_CTL, OUTPUT);
digitalWrite(PIN_SCREEN_VDD_CTL, LOW); // Start with power on
#endif
}
variants/nrf52840/heltec_mesh_solar/variant.h
+15 -18
View File
@@ -39,16 +39,15 @@ extern "C" {
#define NUM_ANALOG_INPUTS (1)
#define NUM_ANALOG_OUTPUTS (0)
#define PIN_LED1 (0 + 12) // green (confirmed on 1.0 board)
#define PIN_LED1 (0 + 4) // green (confirmed on 1.0 board)
#define LED_BLUE PIN_LED1 // fake for bluefruit library
#define LED_GREEN PIN_LED1
#define LED_BUILTIN LED_GREEN
#define LED_STATE_ON 0 // State when LED is lit
#define LED_STATE_ON 0 // State when LED is lit
#define HAS_NEOPIXEL // Enable the use of neopixels
#define NEOPIXEL_COUNT 1 // How many neopixels are connected
#define NEOPIXEL_DATA (32+15) // gpio pin used to send data to the neopixels
#define NEOPIXEL_DATA (32 + 15) // gpio pin used to send data to the neopixels
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
/*
@@ -63,7 +62,6 @@ No longer populated on PCB
*/
#define PIN_SERIAL2_RX (0 + 9)
#define PIN_SERIAL2_TX (0 + 10)
// #define PIN_SERIAL2_EN (0 + 17)
/*
* I2C
@@ -71,16 +69,16 @@ No longer populated on PCB
#define WIRE_INTERFACES_COUNT 2
#ifndef HELTEC_MESH_SOLAR_OLED
// I2C bus 0
// Routed to footprint for PCF8563TS RTC
// Not populated on T114 V1, maybe in future?
#define PIN_WIRE_SDA (0 + 6) // P0.26
#define PIN_WIRE_SCL (0 + 26) // P0.26
#define PIN_WIRE_SDA (0 + 6)
#define PIN_WIRE_SCL (0 + 26)
#endif
// I2C bus 1
// Available on header pins, for general use
#define PIN_WIRE1_SDA (0 + 30) // P0.30
#define PIN_WIRE1_SCL (0 + 5) // P0.13
#define PIN_WIRE1_SDA (0 + 30)
#define PIN_WIRE1_SCL (0 + 5)
/*
* Lora radio
@@ -89,14 +87,14 @@ No longer populated on PCB
#define USE_SX1262
// #define USE_SX1268
#define SX126X_CS (0 + 24) // FIXME - we really should define LORA_CS instead
#define LORA_CS (0 + 24)
#define LORA_CS (0 + 24)
#define SX126X_DIO1 (0 + 20)
// Note DIO2 is attached internally to the module to an analog switch for TX/RX switching
// #define SX1262_DIO3 (0 + 21)
// This is used as an *output* from the sx1262 and connected internally to power the tcxo, do not drive from the
// main
// CPU?
#define SX126X_BUSY (0 + 17)
#define SX126X_BUSY (0 + 17)
#define SX126X_RESET (0 + 25)
// Not really an E22 but TTGO seems to be trying to clone that
#define SX126X_DIO2_AS_RF_SWITCH
@@ -129,21 +127,20 @@ No longer populated on PCB
/*
* SPI Interfaces
*/
#define SPI_INTERFACES_COUNT 1
// For LORA, spi 0
#define PIN_SPI_MISO (0 + 23)
#define PIN_SPI_MOSI (0 + 22)
#define PIN_SPI_SCK (0 + 19)
#define PIN_SPI_SCK (0 + 19)
// #define PIN_PWR_EN (0 + 6)
// To debug via the segger JLINK console rather than the CDC-ACM serial device
// #define USE_SEGGER
#define BQ4050_SDA_PIN (32+1) // I2C data line pin
#define BQ4050_SCL_PIN (32+0) // I2C clock line pin
#define BQ4050_EMERGENCY_SHUTDOWN_PIN (32+3) // Emergency shutdown pin
#define BQ4050_SDA_PIN (32 + 1) // I2C data line pin
#define BQ4050_SCL_PIN (32 + 0) // I2C clock line pin
#define BQ4050_EMERGENCY_SHUTDOWN_PIN (32 + 3) // Emergency shutdown pin
#define HAS_RTC 0
#ifdef __cplusplus
variants/nrf52840/meshtiny/platformio.ini
+1 -9
View File
@@ -4,15 +4,7 @@ extends = nrf52840_base
board = meshtiny
board_level = extra
build_flags = ${nrf52840_base.build_flags} -Ivariants/nrf52840/meshtiny -D MESHTINY
-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
-DRADIOLIB_EXCLUDE_SX128X=1
-DRADIOLIB_EXCLUDE_SX127X=1
-DRADIOLIB_EXCLUDE_LR11X0=1
-D INPUTDRIVER_ENCODER_TYPE=2
-D INPUTDRIVER_ENCODER_UP=4
-D INPUTDRIVER_ENCODER_DOWN=26
-D INPUTDRIVER_ENCODER_BTN=28
-D USE_PIN_BUZZER=PIN_BUZZER
-D USE_PIN_BUZZER
-D MESHTASTIC_EXCLUDE_GPS=1
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/meshtiny>
lib_deps =
variants/nrf52840/meshtiny/variant.h
+3 -6
View File
@@ -21,8 +21,6 @@
#define MESHTINY
// #define RAK4630
/** Master clock frequency */
#define VARIANT_MCK (64000000ul)
@@ -76,11 +74,10 @@ extern "C" {
* Buttons
*/
#define PIN_BUTTON1 9
#define CANCEL_BUTTON_PIN 9
#define BUTTON_NEED_PULLUP
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
#define CANCEL_BUTTON_ACTIVE_LOW true
#define CANCEL_BUTTON_ACTIVE_PULLUP false
/*
* Analog pins