mirror of
https://github.com/alexhopeoconnor/firmware.git
synced 2026-10-22 11:17:49 +10:00
Merge branch 'master' into lora-type
This commit is contained in:
Tom Fifield
@@ -8,7 +8,9 @@
|
||||
#define PIN_GPS_EN 4
|
||||
#define GPS_POWER_TOGGLE // Moved definition from platformio.ini to here
|
||||
|
||||
#define BUTTON_PIN 39 // The middle button GPIO on the T-Beam
|
||||
#define BUTTON_PIN 39 // The middle button GPIO on the T-Beam
|
||||
// Note: On the ESP32 base version, gpio34-39 are input-only, and do not have internal pull-ups.
|
||||
// If 39 is not being used for a button, it is suggested to remove the #define.
|
||||
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
|
||||
#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
|
||||
#define ADC_MULTIPLIER 1.85 // (R1 = 470k, R2 = 680k)
|
||||
|
||||
@@ -0,0 +1,62 @@
|
||||
# Simplifies DIY InkHUD builds, with presets for several common E-Ink displays
|
||||
# - build using custom task in Platformio's "Project Tasks" panel
|
||||
# - build with `pio run -e <variant> -t build_weact_154` (or similar)
|
||||
|
||||
# Silence trunk's objections to the import statements
|
||||
# trunk-ignore-all(ruff/F821)
|
||||
# trunk-ignore-all(flake8/F821)
|
||||
|
||||
from SCons.Script import COMMAND_LINE_TARGETS
|
||||
|
||||
Import("env")
|
||||
Import("projenv")
|
||||
|
||||
# Custom targets
|
||||
# These wrappers just run the normal build task under a different target name
|
||||
# We intercept the build later on, based on the target name
|
||||
env.AddTarget(
|
||||
name="build_weact_154",
|
||||
dependencies=["buildprog"],
|
||||
actions=None,
|
||||
title='Build (WeAct 1.54")',
|
||||
)
|
||||
env.AddTarget(
|
||||
name="build_weact_213",
|
||||
dependencies=["buildprog"],
|
||||
actions=None,
|
||||
title='Build (WeAct 2.13")',
|
||||
)
|
||||
env.AddTarget(
|
||||
name="build_weact_290",
|
||||
dependencies=["buildprog"],
|
||||
actions=None,
|
||||
title='Build (WeAct 2.9")',
|
||||
)
|
||||
env.AddTarget(
|
||||
name="build_weact_420",
|
||||
dependencies=["buildprog"],
|
||||
actions=None,
|
||||
title='Build (WeAct 4.2")',
|
||||
)
|
||||
|
||||
# Check whether a build was started via one of our custom targets above
|
||||
|
||||
if "build_weact_154" in COMMAND_LINE_TARGETS:
|
||||
print('Building for WeAct 1.54" Display')
|
||||
projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "ZJY200200_0154DAAMFGN"))
|
||||
projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "15"))
|
||||
|
||||
elif "build_weact_213" in COMMAND_LINE_TARGETS:
|
||||
print('Building for WeAct 2.13" Display')
|
||||
projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "HINK_E0213A289"))
|
||||
projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "10"))
|
||||
|
||||
elif "build_weact_290" in COMMAND_LINE_TARGETS:
|
||||
print('Building for WeAct 2.9" Display')
|
||||
projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "ZJY128296_029EAAMFGN"))
|
||||
projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "15"))
|
||||
|
||||
elif "build_weact_420" in COMMAND_LINE_TARGETS:
|
||||
print('Building for WeAct 4.2" Display')
|
||||
projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "HINK_E042A87"))
|
||||
projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "15"))
|
||||
@@ -0,0 +1,94 @@
|
||||
#pragma once
|
||||
|
||||
#include "configuration.h"
|
||||
|
||||
#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
|
||||
|
||||
// InkHUD-specific components
|
||||
// ---------------------------
|
||||
#include "graphics/niche/InkHUD/InkHUD.h"
|
||||
|
||||
// Applets
|
||||
#include "graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h"
|
||||
#include "graphics/niche/InkHUD/Applets/User/DM/DMApplet.h"
|
||||
#include "graphics/niche/InkHUD/Applets/User/Heard/HeardApplet.h"
|
||||
#include "graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h"
|
||||
#include "graphics/niche/InkHUD/Applets/User/RecentsList/RecentsListApplet.h"
|
||||
#include "graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h"
|
||||
|
||||
// Shared NicheGraphics components
|
||||
// --------------------------------
|
||||
#include "graphics/niche/Drivers/EInk/HINK_E0213A289.h" // WeAct 2.13"
|
||||
#include "graphics/niche/Drivers/EInk/HINK_E042A87.h" // WeAct 4.2"
|
||||
#include "graphics/niche/Drivers/EInk/ZJY128296_029EAAMFGN.h" // WeAct 2.9"
|
||||
#include "graphics/niche/Drivers/EInk/ZJY200200_0154DAAMFGN.h" // WeACt 1.54"
|
||||
|
||||
#include "graphics/niche/Inputs/TwoButton.h"
|
||||
|
||||
#if !defined(INKHUD_BUILDCONF_DRIVER) || !defined(INKHUD_BUILDCONF_DISPLAYRESILIENCE)
|
||||
#error If not using a DIY preset, display model and resilience must be set manually
|
||||
#endif
|
||||
|
||||
void setupNicheGraphics()
|
||||
{
|
||||
using namespace NicheGraphics;
|
||||
|
||||
// SPI
|
||||
// -----------------------------
|
||||
SPI.begin();
|
||||
|
||||
// Driver
|
||||
// -----------------------------
|
||||
|
||||
// Use E-Ink driver
|
||||
Drivers::EInk *driver = new Drivers::INKHUD_BUILDCONF_DRIVER;
|
||||
driver->begin(&SPI, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY, PIN_EINK_RES);
|
||||
|
||||
// InkHUD
|
||||
// ----------------------------
|
||||
|
||||
InkHUD::InkHUD *inkhud = InkHUD::InkHUD::getInstance();
|
||||
|
||||
// Set the driver
|
||||
inkhud->setDriver(driver);
|
||||
|
||||
// Set how many FAST updates per FULL update.
|
||||
inkhud->setDisplayResilience(INKHUD_BUILDCONF_DISPLAYRESILIENCE); // Suggest roughly ten
|
||||
|
||||
// Prepare fonts
|
||||
InkHUD::Applet::fontLarge = FREESANS_9PT_WIN1252;
|
||||
InkHUD::Applet::fontSmall = FREESANS_6PT_WIN1252;
|
||||
|
||||
// Init settings, and customize defaults
|
||||
// Values ignored individually if found saved to flash
|
||||
inkhud->persistence->settings.rotation = (driver->height > driver->width ? 1 : 0); // Rotate 90deg to landscape, if needed
|
||||
inkhud->persistence->settings.userTiles.maxCount = 4;
|
||||
inkhud->persistence->settings.optionalFeatures.batteryIcon = true;
|
||||
|
||||
// Pick applets
|
||||
// Note: order of applets determines priority of "auto-show" feature
|
||||
inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet);
|
||||
inkhud->addApplet("DMs", new InkHUD::DMApplet, true, false, 3); // Default on tile 3
|
||||
inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0), true, false, 2); // Default on tile 2
|
||||
inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1));
|
||||
inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true, false, 1); // Default on tile 1
|
||||
inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet, true, false, 0); // Default on tile 0
|
||||
inkhud->addApplet("Heard", new InkHUD::HeardApplet, true); // Background
|
||||
|
||||
// Start running InkHUD
|
||||
inkhud->begin();
|
||||
|
||||
// Buttons
|
||||
// --------------------------
|
||||
|
||||
Inputs::TwoButton *buttons = Inputs::TwoButton::getInstance(); // Shared NicheGraphics component
|
||||
|
||||
// Setup the main user button
|
||||
buttons->setWiring(0, Inputs::TwoButton::getUserButtonPin(), true); // Internal pull up
|
||||
buttons->setHandlerShortPress(0, [inkhud]() { inkhud->shortpress(); });
|
||||
buttons->setHandlerLongPress(0, [inkhud]() { inkhud->longpress(); });
|
||||
|
||||
buttons->start();
|
||||
}
|
||||
|
||||
#endif
|
||||
@@ -22,26 +22,26 @@ extern "C" {
|
||||
/*
|
||||
NRF52 PRO MICRO PIN ASSIGNMENT
|
||||
|
||||
| Pin | Function | | Pin | Function | RF95 |
|
||||
| Pin | Function | | Pin | Function | RF95 |
|
||||
| ----- | ----------- | --- | -------- | ------------ | ----- |
|
||||
| Gnd | | | vbat | | |
|
||||
| P0.06 | Serial2 RX | | vbat | | |
|
||||
| P0.08 | Serial2 TX | | Gnd | | |
|
||||
| Gnd | | | reset | | |
|
||||
| Gnd | | | ext_vcc | *see 0.13 | |
|
||||
| P0.17 | RXEN | | P0.31 | BATTERY_PIN | |
|
||||
| P0.20 | GPS_RX | | P0.29 | BUSY | DIO0 |
|
||||
| P0.22 | GPS_TX | | P0.02 | MISO | MISO |
|
||||
| P0.24 | GPS_EN | | P1.15 | MOSI | MOSI |
|
||||
| P1.00 | BUTTON_PIN | | P1.13 | CS | CS |
|
||||
| P0.11 | SCL | | P1.11 | SCK | SCK |
|
||||
| P1.04 | SDA | | P0.10 | DIO1/IRQ | DIO1 |
|
||||
| P1.06 | Free pin | | P0.09 | RESET | RST |
|
||||
| | | | | | |
|
||||
| | Mid board | | | Internal | |
|
||||
| P1.01 | Free pin | | 0.15 | LED | |
|
||||
| P1.02 | Free pin | | 0.13 | 3V3_EN | |
|
||||
| P1.07 | Free pin | | | | |
|
||||
| Gnd | | | vbat | | |
|
||||
| P0.06 | Serial2 RX | | vbat | | |
|
||||
| P0.08 | Serial2 TX | | Gnd | | |
|
||||
| Gnd | | | reset | | |
|
||||
| Gnd | | | ext_vcc | *see 0.13 | |
|
||||
| P0.17 | RXEN | | P0.31 | BATTERY_PIN | |
|
||||
| P0.20 | GPS_RX | | P0.29 | BUSY | DIO0 |
|
||||
| P0.22 | GPS_TX | | P0.02 | MISO | MISO |
|
||||
| P0.24 | GPS_EN | | P1.15 | MOSI | MOSI |
|
||||
| P1.00 | BUTTON_PIN | | P1.13 | CS | CS |
|
||||
| P0.11 | SCL | | P1.11 | SCK | SCK |
|
||||
| P1.04 | SDA | | P0.10 | DIO1/IRQ | DIO1 |
|
||||
| P1.06 | Free pin | | P0.09 | RESET | RST |
|
||||
| | | | | | |
|
||||
| | Mid board | | | Internal | |
|
||||
| P1.01 | Free pin | | 0.15 | LED | |
|
||||
| P1.02 | Free pin | | 0.13 | 3V3_EN | |
|
||||
| P1.07 | Free pin | | | | |
|
||||
*/
|
||||
|
||||
// Number of pins defined in PinDescription array
|
||||
@@ -185,6 +185,12 @@ settings.
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
#define TCXO_OPTIONAL // make it so that the firmware can try both TCXO and XTAL
|
||||
|
||||
// E-Ink DIY
|
||||
#define PIN_EINK_CS (32 + 7)
|
||||
#define PIN_EINK_DC (32 + 2)
|
||||
#define PIN_EINK_RES (32 + 1)
|
||||
#define PIN_EINK_BUSY (32 + 6)
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
@@ -68,6 +68,27 @@ lib_deps =
|
||||
${nrf52840_base.lib_deps}
|
||||
debug_tool = jlink
|
||||
|
||||
; NRF52 ProMicro w/ E-Ink display
|
||||
[env:nrf52_promicro_diy-inkhud]
|
||||
board_level = extra
|
||||
extends = nrf52840_base, inkhud
|
||||
board = promicro-nrf52840
|
||||
build_flags =
|
||||
${nrf52840_base.build_flags}
|
||||
${inkhud.build_flags}
|
||||
-I variants/diy/nrf52_promicro_diy_tcxo
|
||||
-D NRF52_PROMICRO_DIY
|
||||
build_src_filter =
|
||||
${nrf52_base.build_src_filter}
|
||||
${inkhud.build_src_filter}
|
||||
+<../variants/diy/nrf52_promicro_diy_tcxo>
|
||||
lib_deps =
|
||||
${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
|
||||
${nrf52840_base.lib_deps}
|
||||
extra_scripts =
|
||||
${env.extra_scripts}
|
||||
variants/diy/nrf52_promicro_diy_tcxo/custom_build_tasks.py ; Add to PIO's Project Tasks pane: preset builds for common displays
|
||||
|
||||
; Seeed XIAO nRF52840 + XIAO Wio SX1262 DIY
|
||||
[env:seeed-xiao-nrf52840-wio-sx1262]
|
||||
board = xiao_ble_sense
|
||||
|
||||
@@ -48,7 +48,7 @@ lib_deps = ${esp32s3_base.lib_deps}
|
||||
lovyan03/LovyanGFX@1.2.0 ; note: v1.2.7 breaks the elecrow 7" display functionality
|
||||
hideakitai/TCA9534@0.1.1
|
||||
|
||||
[crowpanel_small] ; 2.4, 2.8, 3.5 inch
|
||||
[crowpanel_small_esp32s3_base] ; 2.4, 2.8, 3.5 inch
|
||||
extends = crowpanel_base
|
||||
build_flags =
|
||||
${crowpanel_base.build_flags}
|
||||
@@ -62,7 +62,7 @@ build_flags =
|
||||
-D VIEW_320x240
|
||||
-D MAP_FULL_REDRAW
|
||||
|
||||
[crowpanel_large] ; 4.3, 5.0, 7.0 inch
|
||||
[crowpanel_large_esp32s3_base] ; 4.3, 5.0, 7.0 inch
|
||||
extends = crowpanel_base
|
||||
build_flags =
|
||||
${crowpanel_base.build_flags}
|
||||
@@ -73,9 +73,9 @@ build_flags =
|
||||
-D DISPLAY_SET_RESOLUTION
|
||||
|
||||
[env:elecrow-adv-24-28-tft]
|
||||
extends = crowpanel_small
|
||||
extends = crowpanel_small_esp32s3_base
|
||||
build_flags =
|
||||
${crowpanel_small.build_flags}
|
||||
${crowpanel_small_esp32s3_base.build_flags}
|
||||
-D SPI_FREQUENCY=80000000
|
||||
-D LGFX_SCREEN_WIDTH=240
|
||||
-D LGFX_SCREEN_HEIGHT=320
|
||||
@@ -96,9 +96,9 @@ build_flags =
|
||||
-D LGFX_TOUCH_ROTATION=0
|
||||
|
||||
[env:elecrow-adv-35-tft]
|
||||
extends = crowpanel_small
|
||||
extends = crowpanel_small_esp32s3_base
|
||||
build_flags =
|
||||
${crowpanel_small.build_flags}
|
||||
${crowpanel_small_esp32s3_base.build_flags}
|
||||
-D LV_CACHE_DEF_SIZE=2097152
|
||||
-D SPI_FREQUENCY=60000000
|
||||
-D LGFX_SCREEN_WIDTH=320
|
||||
@@ -122,7 +122,7 @@ build_flags =
|
||||
|
||||
; 4.3, 5.0, 7.0 inch 800x480 IPS (V1)
|
||||
[env:elecrow-adv1-43-50-70-tft]
|
||||
extends = crowpanel_large
|
||||
extends = crowpanel_large_esp32s3_base
|
||||
build_flags =
|
||||
${crowpanel_large.build_flags}
|
||||
${crowpanel_large_esp32s3_base.build_flags}
|
||||
-D VIEW_320x240
|
||||
|
||||
@@ -0,0 +1,13 @@
|
||||
; The very slick RAK wireless RAK 4631 / 4630 board - Unified firmware for 5005/19003, with or without OLED RAK 1921
|
||||
[env:gat562_mesh_trial_tracker]
|
||||
extends = nrf52840_base
|
||||
board = gat562_mesh_trial_tracker
|
||||
board_check = true
|
||||
build_flags = ${nrf52840_base.build_flags} -Ivariants/gat562_mesh_trial_tracker -D GAT562_MESH_TRIAL_TRACKER
|
||||
-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
|
||||
-DRADIOLIB_EXCLUDE_SX128X=1
|
||||
-DRADIOLIB_EXCLUDE_SX127X=1
|
||||
-DRADIOLIB_EXCLUDE_LR11X0=1
|
||||
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/gat562_mesh_trial_tracker>
|
||||
lib_deps =
|
||||
${nrf52840_base.lib_deps}
|
||||
@@ -0,0 +1,45 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include "variant.h"
|
||||
#include "nrf.h"
|
||||
#include "wiring_constants.h"
|
||||
#include "wiring_digital.h"
|
||||
|
||||
const uint32_t g_ADigitalPinMap[] = {
|
||||
// P0
|
||||
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
|
||||
|
||||
// P1
|
||||
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
|
||||
|
||||
void initVariant()
|
||||
{
|
||||
// LED1 & LED2
|
||||
pinMode(PIN_LED1, OUTPUT);
|
||||
ledOff(PIN_LED1);
|
||||
|
||||
pinMode(PIN_LED2, OUTPUT);
|
||||
ledOff(PIN_LED2);
|
||||
|
||||
// 3V3 Power Rail
|
||||
pinMode(PIN_3V3_EN, OUTPUT);
|
||||
digitalWrite(PIN_3V3_EN, HIGH);
|
||||
}
|
||||
@@ -0,0 +1,288 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef _VARIANT_GAT562_MESH_TRIAL_TRACKER_
|
||||
#define _VARIANT_GAT562_MESH_TRIAL_TRACKER_
|
||||
|
||||
#define GAT562_MESH_TRIAL_TRACKER
|
||||
|
||||
// led pin 2 (blue), see https://github.com/meshtastic/firmware/blob/master/src/mesh/NodeDB.cpp#L723
|
||||
#define RAK4630
|
||||
|
||||
/** Master clock frequency */
|
||||
#define VARIANT_MCK (64000000ul)
|
||||
|
||||
#define USE_LFXO // Board uses 32khz crystal for LF
|
||||
// define USE_LFRC // Board uses RC for LF
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#include "WVariant.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif // __cplusplus
|
||||
|
||||
// Number of pins defined in PinDescription array
|
||||
#define PINS_COUNT (48)
|
||||
#define NUM_DIGITAL_PINS (48)
|
||||
#define NUM_ANALOG_INPUTS (6)
|
||||
#define NUM_ANALOG_OUTPUTS (0)
|
||||
|
||||
// LEDs
|
||||
#define PIN_LED1 (35)
|
||||
#define PIN_LED2 (36)
|
||||
|
||||
#define LED_BUILTIN PIN_LED1
|
||||
#define LED_CONN PIN_LED2
|
||||
|
||||
#define LED_GREEN PIN_LED1
|
||||
#define LED_BLUE PIN_LED2
|
||||
|
||||
#define LED_STATE_ON 1 // State when LED is litted
|
||||
|
||||
/*
|
||||
* Buttons
|
||||
*/
|
||||
|
||||
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
|
||||
#define BUTTON_NEED_PULLUP
|
||||
#define PIN_BUTTON2 12
|
||||
#define PIN_BUTTON3 24
|
||||
#define PIN_BUTTON4 25
|
||||
|
||||
/*
|
||||
* Analog pins
|
||||
*/
|
||||
#define PIN_A0 (5)
|
||||
#define PIN_A1 (31)
|
||||
#define PIN_A2 (28)
|
||||
#define PIN_A3 (29)
|
||||
#define PIN_A4 (30)
|
||||
#define PIN_A5 (31)
|
||||
#define PIN_A6 (0xff)
|
||||
#define PIN_A7 (0xff)
|
||||
|
||||
static const uint8_t A0 = PIN_A0;
|
||||
static const uint8_t A1 = PIN_A1;
|
||||
static const uint8_t A2 = PIN_A2;
|
||||
static const uint8_t A3 = PIN_A3;
|
||||
static const uint8_t A4 = PIN_A4;
|
||||
static const uint8_t A5 = PIN_A5;
|
||||
static const uint8_t A6 = PIN_A6;
|
||||
static const uint8_t A7 = PIN_A7;
|
||||
#define ADC_RESOLUTION 14
|
||||
|
||||
// Other pins
|
||||
#define PIN_AREF (2)
|
||||
#define PIN_NFC1 (9)
|
||||
#define PIN_NFC2 (10)
|
||||
|
||||
static const uint8_t AREF = PIN_AREF;
|
||||
|
||||
/*
|
||||
* Serial interfaces
|
||||
*/
|
||||
#define PIN_SERIAL1_RX (15)
|
||||
#define PIN_SERIAL1_TX (16)
|
||||
|
||||
// Connected to Jlink CDC
|
||||
#define PIN_SERIAL2_RX (8)
|
||||
#define PIN_SERIAL2_TX (6)
|
||||
|
||||
/*
|
||||
* SPI Interfaces
|
||||
*/
|
||||
#define SPI_INTERFACES_COUNT 2
|
||||
|
||||
#define PIN_SPI_MISO (45)
|
||||
#define PIN_SPI_MOSI (44)
|
||||
#define PIN_SPI_SCK (43)
|
||||
|
||||
#define PIN_SPI1_MISO (29) // (0 + 29)
|
||||
#define PIN_SPI1_MOSI (30) // (0 + 30)
|
||||
#define PIN_SPI1_SCK (3) // (0 + 3)
|
||||
|
||||
static const uint8_t SS = 42;
|
||||
static const uint8_t MOSI = PIN_SPI_MOSI;
|
||||
static const uint8_t MISO = PIN_SPI_MISO;
|
||||
static const uint8_t SCK = PIN_SPI_SCK;
|
||||
|
||||
/*
|
||||
* eink display pins
|
||||
*/
|
||||
|
||||
// #define PIN_EINK_CS (0 + 26)
|
||||
// #define PIN_EINK_BUSY (0 + 4)
|
||||
// #define PIN_EINK_DC (0 + 17)
|
||||
// #define PIN_EINK_RES (-1)
|
||||
// #define PIN_EINK_SCLK (0 + 3)
|
||||
// #define PIN_EINK_MOSI (0 + 30) // also called SDI
|
||||
|
||||
// #define USE_EINK
|
||||
|
||||
// Display - OLED connected via I2C
|
||||
#define HAS_SCREEN 1
|
||||
#define USE_SSD1306
|
||||
|
||||
// RAKRGB
|
||||
// #define HAS_NCP5623
|
||||
|
||||
/*
|
||||
* Wire Interfaces
|
||||
*/
|
||||
#define WIRE_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_WIRE_SDA (13)
|
||||
#define PIN_WIRE_SCL (14)
|
||||
|
||||
// QSPI Pins
|
||||
#define PIN_QSPI_SCK 3
|
||||
#define PIN_QSPI_CS 26
|
||||
#define PIN_QSPI_IO0 30
|
||||
#define PIN_QSPI_IO1 29
|
||||
#define PIN_QSPI_IO2 28
|
||||
#define PIN_QSPI_IO3 2
|
||||
|
||||
// On-board QSPI Flash
|
||||
#define EXTERNAL_FLASH_DEVICES IS25LP080D
|
||||
#define EXTERNAL_FLASH_USE_QSPI
|
||||
|
||||
/* @note RAK5005-O GPIO mapping to RAK4631 GPIO ports
|
||||
RAK5005-O <-> nRF52840
|
||||
IO1 <-> P0.17 (Arduino GPIO number 17)
|
||||
IO2 <-> P1.02 (Arduino GPIO number 34)
|
||||
IO3 <-> P0.21 (Arduino GPIO number 21)
|
||||
IO4 <-> P0.04 (Arduino GPIO number 4)
|
||||
IO5 <-> P0.09 (Arduino GPIO number 9)
|
||||
IO6 <-> P0.10 (Arduino GPIO number 10)
|
||||
IO7 <-> P0.28 (Arduino GPIO number 28)
|
||||
SW1 <-> P0.01 (Arduino GPIO number 1)
|
||||
A0 <-> P0.04/AIN2 (Arduino Analog A2
|
||||
A1 <-> P0.31/AIN7 (Arduino Analog A7
|
||||
SPI_CS <-> P0.26 (Arduino GPIO number 26)
|
||||
*/
|
||||
|
||||
// RAK4630 LoRa module
|
||||
|
||||
/* Setup of the SX1262 LoRa module ( https://docs.rakwireless.com/Product-Categories/WisBlock/RAK4631/Datasheet/ )
|
||||
|
||||
P1.10 NSS SPI NSS (Arduino GPIO number 42)
|
||||
P1.11 SCK SPI CLK (Arduino GPIO number 43)
|
||||
P1.12 MOSI SPI MOSI (Arduino GPIO number 44)
|
||||
P1.13 MISO SPI MISO (Arduino GPIO number 45)
|
||||
P1.14 BUSY BUSY signal (Arduino GPIO number 46)
|
||||
P1.15 DIO1 DIO1 event interrupt (Arduino GPIO number 47)
|
||||
P1.06 NRESET NRESET manual reset of the SX1262 (Arduino GPIO number 38)
|
||||
|
||||
Important for successful SX1262 initialization:
|
||||
|
||||
* Setup DIO2 to control the antenna switch
|
||||
* Setup DIO3 to control the TCXO power supply
|
||||
* Setup the SX1262 to use it's DCDC regulator and not the LDO
|
||||
* RAK4630 schematics show GPIO P1.07 connected to the antenna switch, but it should not be initialized, as DIO2 will do the
|
||||
control of the antenna switch
|
||||
|
||||
SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
|
||||
|
||||
*/
|
||||
|
||||
// configure the SET pin on the RAK12039 sensor board to disable the sensor while not reading
|
||||
// air quality telemetry. PIN_NFC2 doesn't seem to be used anywhere else in the codebase, but if
|
||||
// you're having problems with your node behaving weirdly when a RAK12039 board isn't connected,
|
||||
// try disabling this.
|
||||
// #define PMSA003I_ENABLE_PIN PIN_NFC2
|
||||
|
||||
// #define DETECTION_SENSOR_EN 4
|
||||
|
||||
#define USE_SX1262
|
||||
#define SX126X_CS (42)
|
||||
#define SX126X_DIO1 (47)
|
||||
#define SX126X_BUSY (46)
|
||||
#define SX126X_RESET (38)
|
||||
// #define SX126X_TXEN (39)
|
||||
// #define SX126X_RXEN (37)
|
||||
#define SX126X_POWER_EN (37)
|
||||
// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
|
||||
#define SX126X_DIO2_AS_RF_SWITCH
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
|
||||
// Testing USB detection
|
||||
#define NRF_APM
|
||||
|
||||
// enables 3.3V periphery like GPS or IO Module
|
||||
// Do not toggle this for GPS power savings
|
||||
#define PIN_3V3_EN (34)
|
||||
|
||||
// RAK1910 GPS module
|
||||
// If using the wisblock GPS module and pluged into Port A on WisBlock base
|
||||
// IO1 is hooked to PPS (pin 12 on header) = gpio 17
|
||||
// IO2 is hooked to GPS RESET = gpio 34, but it can not be used to this because IO2 is ALSO used to control 3V3_S power (1 is on).
|
||||
// Therefore must be 1 to keep peripherals powered
|
||||
// Power is on the controllable 3V3_S rail
|
||||
// #define PIN_GPS_RESET (34)
|
||||
// #define PIN_GPS_EN PIN_3V3_EN
|
||||
#define PIN_GPS_PPS (17) // Pulse per second input from the GPS
|
||||
|
||||
#define GPS_BAUDRATE 9600
|
||||
|
||||
#define GPS_RX_PIN PIN_SERIAL1_RX
|
||||
#define GPS_TX_PIN PIN_SERIAL1_TX
|
||||
|
||||
// Define pin to enable GPS toggle (set GPIO to LOW) via user button triple press
|
||||
|
||||
// RAK12002 RTC Module
|
||||
// #define RV3028_RTC (uint8_t)0b1010010
|
||||
|
||||
// RAK18001 Buzzer in Slot C
|
||||
// #define PIN_BUZZER 21 // IO3 is PWM2
|
||||
// NEW: set this via protobuf instead!
|
||||
|
||||
// Battery
|
||||
// The battery sense is hooked to pin A0 (5)
|
||||
#define BATTERY_PIN PIN_A0
|
||||
// and has 12 bit resolution
|
||||
#define BATTERY_SENSE_RESOLUTION_BITS 12
|
||||
#define BATTERY_SENSE_RESOLUTION 4096.0
|
||||
#undef AREF_VOLTAGE
|
||||
#define AREF_VOLTAGE 3.0
|
||||
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
|
||||
#define ADC_MULTIPLIER 1.73
|
||||
|
||||
// #define HAS_RTC 1
|
||||
|
||||
// #define HAS_ETHERNET 1
|
||||
|
||||
// #define RAK_4631 1
|
||||
|
||||
// #define PIN_ETHERNET_RESET 21
|
||||
// #define PIN_ETHERNET_SS PIN_EINK_CS
|
||||
// #define ETH_SPI_PORT SPI1
|
||||
// #define AQ_SET_PIN 10
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,62 @@
|
||||
# Simplifies DIY InkHUD builds, with presets for several common E-Ink displays
|
||||
# - build using custom task in Platformio's "Project Tasks" panel
|
||||
# - build with `pio run -e <variant> -t build_weact_154` (or similar)
|
||||
|
||||
# Silence trunk's objections to the import statements
|
||||
# trunk-ignore-all(ruff/F821)
|
||||
# trunk-ignore-all(flake8/F821)
|
||||
|
||||
from SCons.Script import COMMAND_LINE_TARGETS
|
||||
|
||||
Import("env")
|
||||
Import("projenv")
|
||||
|
||||
# Custom targets
|
||||
# These wrappers just run the normal build task under a different target name
|
||||
# We intercept the build later on, based on the target name
|
||||
env.AddTarget(
|
||||
name="build_weact_154",
|
||||
dependencies=["buildprog"],
|
||||
actions=None,
|
||||
title='Build (WeAct 1.54")',
|
||||
)
|
||||
env.AddTarget(
|
||||
name="build_weact_213",
|
||||
dependencies=["buildprog"],
|
||||
actions=None,
|
||||
title='Build (WeAct 2.13")',
|
||||
)
|
||||
env.AddTarget(
|
||||
name="build_weact_290",
|
||||
dependencies=["buildprog"],
|
||||
actions=None,
|
||||
title='Build (WeAct 2.9")',
|
||||
)
|
||||
env.AddTarget(
|
||||
name="build_weact_420",
|
||||
dependencies=["buildprog"],
|
||||
actions=None,
|
||||
title='Build (WeAct 4.2")',
|
||||
)
|
||||
|
||||
# Check whether a build was started via one of our custom targets above
|
||||
|
||||
if "build_weact_154" in COMMAND_LINE_TARGETS:
|
||||
print('Building for WeAct 1.54" Display')
|
||||
projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "ZJY200200_0154DAAMFGN"))
|
||||
projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "15"))
|
||||
|
||||
elif "build_weact_213" in COMMAND_LINE_TARGETS:
|
||||
print('Building for WeAct 2.13" Display')
|
||||
projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "HINK_E0213A289"))
|
||||
projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "10"))
|
||||
|
||||
elif "build_weact_290" in COMMAND_LINE_TARGETS:
|
||||
print('Building for WeAct 2.9" Display')
|
||||
projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "ZJY128296_029EAAMFGN"))
|
||||
projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "15"))
|
||||
|
||||
elif "build_weact_420" in COMMAND_LINE_TARGETS:
|
||||
print('Building for WeAct 4.2" Display')
|
||||
projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "HINK_E042A87"))
|
||||
projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "15"))
|
||||
@@ -0,0 +1,95 @@
|
||||
#pragma once
|
||||
|
||||
#include "configuration.h"
|
||||
|
||||
#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
|
||||
|
||||
// InkHUD-specific components
|
||||
// ---------------------------
|
||||
#include "graphics/niche/InkHUD/InkHUD.h"
|
||||
|
||||
// Applets
|
||||
#include "graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h"
|
||||
#include "graphics/niche/InkHUD/Applets/User/DM/DMApplet.h"
|
||||
#include "graphics/niche/InkHUD/Applets/User/Heard/HeardApplet.h"
|
||||
#include "graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h"
|
||||
#include "graphics/niche/InkHUD/Applets/User/RecentsList/RecentsListApplet.h"
|
||||
#include "graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h"
|
||||
|
||||
// Shared NicheGraphics components
|
||||
// --------------------------------
|
||||
#include "graphics/niche/Drivers/EInk/HINK_E0213A289.h" // WeAct 2.13"
|
||||
#include "graphics/niche/Drivers/EInk/HINK_E042A87.h" // WeAct 4.2"
|
||||
#include "graphics/niche/Drivers/EInk/ZJY128296_029EAAMFGN.h" // WeAct 2.9"
|
||||
#include "graphics/niche/Drivers/EInk/ZJY200200_0154DAAMFGN.h" // WeACt 1.54"
|
||||
|
||||
#include "graphics/niche/Inputs/TwoButton.h"
|
||||
|
||||
#if !defined(INKHUD_BUILDCONF_DRIVER) || !defined(INKHUD_BUILDCONF_DISPLAYRESILIENCE)
|
||||
// cppcheck-suppress preprocessorErrorDirective
|
||||
#error If not using a DIY preset, display model and resilience must be set manually
|
||||
#endif
|
||||
|
||||
void setupNicheGraphics()
|
||||
{
|
||||
using namespace NicheGraphics;
|
||||
|
||||
// SPI
|
||||
// -----------------------------
|
||||
SPI1.begin();
|
||||
|
||||
// Driver
|
||||
// -----------------------------
|
||||
|
||||
// Use E-Ink driver
|
||||
Drivers::EInk *driver = new Drivers::INKHUD_BUILDCONF_DRIVER;
|
||||
driver->begin(&SPI1, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY, PIN_EINK_RES);
|
||||
|
||||
// InkHUD
|
||||
// ----------------------------
|
||||
|
||||
InkHUD::InkHUD *inkhud = InkHUD::InkHUD::getInstance();
|
||||
|
||||
// Set the driver
|
||||
inkhud->setDriver(driver);
|
||||
|
||||
// Set how many FAST updates per FULL update.
|
||||
inkhud->setDisplayResilience(INKHUD_BUILDCONF_DISPLAYRESILIENCE); // Suggest roughly ten
|
||||
|
||||
// Prepare fonts
|
||||
InkHUD::Applet::fontLarge = FREESANS_9PT_WIN1252;
|
||||
InkHUD::Applet::fontSmall = FREESANS_6PT_WIN1252;
|
||||
|
||||
// Init settings, and customize defaults
|
||||
// Values ignored individually if found saved to flash
|
||||
inkhud->persistence->settings.rotation = (driver->height > driver->width ? 1 : 0); // Rotate 90deg to landscape, if needed
|
||||
inkhud->persistence->settings.userTiles.maxCount = 4;
|
||||
inkhud->persistence->settings.optionalFeatures.batteryIcon = true;
|
||||
|
||||
// Pick applets
|
||||
// Note: order of applets determines priority of "auto-show" feature
|
||||
inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet);
|
||||
inkhud->addApplet("DMs", new InkHUD::DMApplet, true, false, 3); // Default on tile 3
|
||||
inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0), true, false, 2); // Default on tile 2
|
||||
inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1));
|
||||
inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true, false, 1); // Default on tile 1
|
||||
inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet, true, false, 0); // Default on tile 0
|
||||
inkhud->addApplet("Heard", new InkHUD::HeardApplet, true); // Background
|
||||
|
||||
// Start running InkHUD
|
||||
inkhud->begin();
|
||||
|
||||
// Buttons
|
||||
// --------------------------
|
||||
|
||||
Inputs::TwoButton *buttons = Inputs::TwoButton::getInstance(); // Shared NicheGraphics component
|
||||
|
||||
// #0: Main User Button
|
||||
buttons->setWiring(0, Inputs::TwoButton::getUserButtonPin());
|
||||
buttons->setHandlerShortPress(0, [inkhud]() { inkhud->shortpress(); });
|
||||
buttons->setHandlerLongPress(0, [inkhud]() { inkhud->longpress(); });
|
||||
|
||||
buttons->start();
|
||||
}
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,19 @@
|
||||
[env:heltec-mesh-node-t114-inkhud]
|
||||
board_level = extra
|
||||
extends = nrf52840_base, inkhud
|
||||
board = heltec_mesh_node_t114
|
||||
board_check = true
|
||||
build_flags =
|
||||
${nrf52840_base.build_flags}
|
||||
${inkhud.build_flags}
|
||||
-I variants/heltec_mesh_node_t114-inkhud
|
||||
build_src_filter =
|
||||
${nrf52_base.build_src_filter}
|
||||
${inkhud.build_src_filter}
|
||||
lib_deps =
|
||||
${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
|
||||
${nrf52840_base.lib_deps}
|
||||
lewisxhe/PCF8563_Library@^1.0.1
|
||||
extra_scripts =
|
||||
${env.extra_scripts}
|
||||
variants/diy/nrf52_promicro_diy_tcxo/custom_build_tasks.py ; Add to PIO's Project Tasks pane: preset builds for common displays
|
||||
@@ -0,0 +1,38 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include "variant.h"
|
||||
#include "nrf.h"
|
||||
#include "wiring_constants.h"
|
||||
#include "wiring_digital.h"
|
||||
|
||||
const uint32_t g_ADigitalPinMap[] = {
|
||||
// P0 - pins 0 and 1 are hardwired for xtal and should never be enabled
|
||||
0xff, 0xff, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
|
||||
|
||||
// P1
|
||||
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
|
||||
|
||||
void initVariant()
|
||||
{
|
||||
// LED1
|
||||
pinMode(PIN_LED1, OUTPUT);
|
||||
ledOff(PIN_LED1);
|
||||
}
|
||||
@@ -0,0 +1,175 @@
|
||||
// Unlike many other InkHUD variants, this environment does require its own variant.h file
|
||||
// This is because the default T114 variant maps SPI1 pins to the optional TFT display, and those pins are not broken out
|
||||
|
||||
#ifndef _VARIANT_HELTEC_NRF_
|
||||
#define _VARIANT_HELTEC_NRF_
|
||||
/** Master clock frequency */
|
||||
#define VARIANT_MCK (64000000ul)
|
||||
|
||||
#define USE_LFXO // Board uses 32khz crystal for LF
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#include "WVariant.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif // __cplusplus
|
||||
|
||||
#define HELTEC_MESH_NODE_T114
|
||||
|
||||
// Number of pins defined in PinDescription array
|
||||
#define PINS_COUNT (48)
|
||||
#define NUM_DIGITAL_PINS (48)
|
||||
#define NUM_ANALOG_INPUTS (1)
|
||||
#define NUM_ANALOG_OUTPUTS (0)
|
||||
|
||||
// LEDs
|
||||
#define PIN_LED1 (32 + 3) // green (confirmed on 1.0 board)
|
||||
#define LED_BLUE PIN_LED1 // fake for bluefruit library
|
||||
#define LED_GREEN PIN_LED1
|
||||
#define LED_BUILTIN LED_GREEN
|
||||
#define LED_STATE_ON 0 // State when LED is lit
|
||||
|
||||
#define HAS_NEOPIXEL // Enable the use of neopixels
|
||||
#define NEOPIXEL_COUNT 2 // How many neopixels are connected
|
||||
#define NEOPIXEL_DATA 14 // gpio pin used to send data to the neopixels
|
||||
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
|
||||
|
||||
/*
|
||||
* Buttons
|
||||
*/
|
||||
#define PIN_BUTTON1 (32 + 10)
|
||||
// #define PIN_BUTTON2 (0 + 18) // 0.18 is labeled on the board as RESET but we configure it in the bootloader as a regular
|
||||
// GPIO
|
||||
|
||||
/*
|
||||
No longer populated on PCB
|
||||
*/
|
||||
#define PIN_SERIAL2_RX (0 + 9)
|
||||
#define PIN_SERIAL2_TX (0 + 10)
|
||||
// #define PIN_SERIAL2_EN (0 + 17)
|
||||
|
||||
/*
|
||||
* I2C
|
||||
*/
|
||||
|
||||
#define WIRE_INTERFACES_COUNT 2
|
||||
|
||||
// I2C bus 0
|
||||
// Routed to footprint for PCF8563TS RTC
|
||||
// Not populated on T114 V1, maybe in future?
|
||||
#define PIN_WIRE_SDA (0 + 26) // P0.26
|
||||
#define PIN_WIRE_SCL (0 + 27) // P0.27
|
||||
|
||||
// I2C bus 1
|
||||
// Available on header pins, for general use
|
||||
#define PIN_WIRE1_SDA (0 + 16) // P0.16
|
||||
#define PIN_WIRE1_SCL (0 + 13) // P0.13
|
||||
|
||||
/*
|
||||
* Lora radio
|
||||
*/
|
||||
|
||||
#define USE_SX1262
|
||||
// #define USE_SX1268
|
||||
#define SX126X_CS (0 + 24) // FIXME - we really should define LORA_CS instead
|
||||
#define LORA_CS (0 + 24)
|
||||
#define SX126X_DIO1 (0 + 20)
|
||||
// Note DIO2 is attached internally to the module to an analog switch for TX/RX switching
|
||||
// #define SX1262_DIO3 (0 + 21)
|
||||
// This is used as an *output* from the sx1262 and connected internally to power the tcxo, do not drive from the
|
||||
// main
|
||||
// CPU?
|
||||
#define SX126X_BUSY (0 + 17)
|
||||
#define SX126X_RESET (0 + 25)
|
||||
// Not really an E22 but TTGO seems to be trying to clone that
|
||||
#define SX126X_DIO2_AS_RF_SWITCH
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
|
||||
/*
|
||||
* E-Ink DIY
|
||||
*/
|
||||
#define PIN_EINK_MOSI (0 + 8) // also called SDA
|
||||
#define PIN_EINK_SCLK (0 + 7)
|
||||
#define PIN_EINK_CS (32 + 12)
|
||||
#define PIN_EINK_DC (32 + 14)
|
||||
#define PIN_EINK_RES (0 + 5)
|
||||
#define PIN_EINK_BUSY (32 + 15)
|
||||
|
||||
/*
|
||||
* GPS pins
|
||||
*/
|
||||
|
||||
#define GPS_L76K
|
||||
|
||||
// #define PIN_GPS_RESET (32 + 6) // An output to reset L76K GPS. As per datasheet, low for > 100ms will reset the L76K
|
||||
#define GPS_RESET_MODE LOW
|
||||
// #define PIN_GPS_EN (21)
|
||||
#define VEXT_ENABLE (0 + 21)
|
||||
#define PERIPHERAL_WARMUP_MS 1000 // Make sure I2C QuickLink has stable power before continuing
|
||||
#define VEXT_ON_VALUE HIGH
|
||||
// #define GPS_EN_ACTIVE HIGH
|
||||
#define PIN_GPS_STANDBY (32 + 2) // An output to wake GPS, low means allow sleep, high means force wake
|
||||
#define PIN_GPS_PPS (32 + 4)
|
||||
// Seems to be missing on this new board
|
||||
// #define PIN_GPS_PPS (32 + 4) // Pulse per second input from the GPS
|
||||
#define GPS_TX_PIN (32 + 5) // This is for bits going TOWARDS the CPU
|
||||
#define GPS_RX_PIN (32 + 7) // This is for bits going TOWARDS the GPS
|
||||
|
||||
#define GPS_THREAD_INTERVAL 50
|
||||
|
||||
#define PIN_SERIAL1_RX GPS_TX_PIN
|
||||
#define PIN_SERIAL1_TX GPS_RX_PIN
|
||||
|
||||
// PCF8563 RTC Module
|
||||
#define PCF8563_RTC 0x51
|
||||
|
||||
/*
|
||||
* SPI Interfaces
|
||||
*/
|
||||
#define SPI_INTERFACES_COUNT 2
|
||||
|
||||
// For LORA, spi 0
|
||||
#define PIN_SPI_MISO (0 + 23)
|
||||
#define PIN_SPI_MOSI (0 + 22)
|
||||
#define PIN_SPI_SCK (0 + 19)
|
||||
|
||||
#define PIN_SPI1_MISO -1
|
||||
#define PIN_SPI1_MOSI PIN_EINK_MOSI
|
||||
#define PIN_SPI1_SCK PIN_EINK_SCLK
|
||||
|
||||
// #define PIN_PWR_EN (0 + 6)
|
||||
|
||||
// To debug via the segger JLINK console rather than the CDC-ACM serial device
|
||||
// #define USE_SEGGER
|
||||
|
||||
// Battery
|
||||
// The battery sense is hooked to pin A0 (4)
|
||||
// it is defined in the anlaolgue pin section of this file
|
||||
// and has 12 bit resolution
|
||||
|
||||
#define ADC_CTRL 6
|
||||
#define ADC_CTRL_ENABLED HIGH
|
||||
#define BATTERY_PIN 4
|
||||
#define ADC_RESOLUTION 14
|
||||
|
||||
#define BATTERY_SENSE_RESOLUTION_BITS 12
|
||||
#define BATTERY_SENSE_RESOLUTION 4096.0
|
||||
#undef AREF_VOLTAGE
|
||||
#define AREF_VOLTAGE 3.0
|
||||
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
|
||||
#define ADC_MULTIPLIER (4.90F)
|
||||
|
||||
#define HAS_RTC 0
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#endif
|
||||
@@ -28,7 +28,7 @@ lib_deps =
|
||||
https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d
|
||||
|
||||
|
||||
[env:heltec-mesh-pocket-inkhud-5000]
|
||||
[env:heltec-mesh-pocket-5000-inkhud]
|
||||
extends = nrf52840_base, inkhud
|
||||
board = heltec_mesh_pocket
|
||||
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/heltec_mesh_pocket> ${inkhud.build_src_filter}
|
||||
@@ -73,7 +73,7 @@ lib_deps =
|
||||
https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d
|
||||
|
||||
|
||||
[env:heltec-mesh-pocket-inkhud-10000]
|
||||
[env:heltec-mesh-pocket-10000-inkhud]
|
||||
extends = nrf52840_base, inkhud
|
||||
board = heltec_mesh_pocket
|
||||
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/heltec_mesh_pocket> ${inkhud.build_src_filter}
|
||||
|
||||
@@ -3,4 +3,21 @@
|
||||
extends = esp32_base
|
||||
board = heltec_wifi_lora_32
|
||||
build_flags =
|
||||
${esp32_base.build_flags} -D HELTEC_WIRELESS_BRIDGE -I variants/heltec_wireless_bridge
|
||||
${esp32_base.build_flags}
|
||||
-I variants/heltec_wireless_bridge
|
||||
-D HELTEC_WIRELESS_BRIDGE
|
||||
-D BOARD_HAS_PSRAM
|
||||
-D RADIOLIB_EXCLUDE_LR11X0=1
|
||||
-D RADIOLIB_EXCLUDE_SX128X=1
|
||||
-D MESHTASTIC_EXCLUDE_CANNEDMESSAGES=1
|
||||
-D MESHTASTIC_EXCLUDE_DETECTIONSENSOR=1
|
||||
-D MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
|
||||
-D MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR_EXTERNAL=1
|
||||
-D MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION=1
|
||||
-D MESHTASTIC_EXCLUDE_GPS=1
|
||||
-D MESHTASTIC_EXCLUDE_I2C=1
|
||||
-D MESHTASTIC_EXCLUDE_INPUTBROKER=1
|
||||
-D MESHTASTIC_EXCLUDE_POWER_FSM=1
|
||||
-D MESHTASTIC_EXCLUDE_SERIAL=1
|
||||
-D MESHTASTIC_EXCLUDE_SCREEN=1
|
||||
-D MESHTASTIC_EXCLUDE_WAYPOINT=1
|
||||
|
||||
@@ -1,29 +1,41 @@
|
||||
// the default ESP32 Pin of 15 is the Oled SCL, set to 36 and 37 and works fine.
|
||||
// Tested on Neo6m module.
|
||||
|
||||
// updated variant 20250420 berlincount, tested with HTIT-TB
|
||||
//
|
||||
// connections in HTIT-WB
|
||||
// per https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf
|
||||
// md5: a0e6ae10ff76611aa61433366b2e4f5c esp32_datasheet_en.pdf
|
||||
// per https://resource.heltec.cn/download/Wireless_Bridge/Schematic_Diagram_HTIT-WB_V0.2.pdf
|
||||
// md5: d5c1b0219ece347dd8cee866d7d3ab0a Schematic_Diagram_HTIT-WB_V0.2.pdf
|
||||
|
||||
#define NO_EXT_GPIO 1
|
||||
#define NO_GPS 1
|
||||
|
||||
#define HAS_GPS 0 // GPS is not equipped
|
||||
#undef GPS_RX_PIN
|
||||
#undef GPS_TX_PIN
|
||||
#define GPS_RX_PIN 36
|
||||
#define GPS_TX_PIN 33
|
||||
|
||||
#ifndef USE_JTAG // gpio15 is TDO for JTAG, so no I2C on this board while doing jtag
|
||||
#define I2C_SDA 4 // I2C pins for this board
|
||||
#define I2C_SCL 15
|
||||
#endif
|
||||
|
||||
#define LED_PIN 25 // If defined we will blink this LED
|
||||
#define BUTTON_PIN 0 // If defined, this will be used for user button presses
|
||||
// Green / Lora = PIN 22 / GPIO2, Yellow / Wifi = PIN 23 / GPIO0, Blue / BLE = PIN 25 / GPIO16
|
||||
#define LED_PIN 22
|
||||
#define WIFI_LED 23
|
||||
#define BLE_LED 25
|
||||
|
||||
// ESP32-D0WDQ6 direct pins SX1276
|
||||
#define USE_RF95
|
||||
#define LORA_DIO0 26 // a No connect on the SX1262 module
|
||||
#ifndef USE_JTAG
|
||||
#define LORA_RESET 14
|
||||
#endif
|
||||
#define LORA_DIO0 26
|
||||
#define LORA_DIO1 35
|
||||
#define LORA_DIO2 34 // Not really used
|
||||
#define LORA_DIO2 34
|
||||
#define LORA_SCK 05
|
||||
#define LORA_MISO 19
|
||||
#define LORA_MOSI 27
|
||||
#define LORA_CS 18
|
||||
|
||||
// ratio of voltage divider = 3.20 (R1=100k, R2=220k)
|
||||
#define ADC_MULTIPLIER 3.2
|
||||
// several things are not possible with JTAG enabled
|
||||
#ifndef USE_JTAG
|
||||
#define LORA_RESET 14 // LoRa Reset shares a pin with MTMS
|
||||
#define I2C_SDA 4 // SD_DATA1 going to W25Q64, but
|
||||
#define I2C_SCL 15 // SD_CMD shared a pin with MTD0
|
||||
#endif
|
||||
|
||||
#define BATTERY_PIN 13 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
|
||||
#define ADC_CHANNEL ADC2_GPIO13_CHANNEL
|
||||
#define BAT_MEASURE_ADC_UNIT 2
|
||||
// user button is present on device, but currently untested & unconfigured - couldn't figure out how it's connected
|
||||
|
||||
// battery support is present within device, but currently untested & unconfigured - couldn't find reliable information yet
|
||||
|
||||
@@ -219,6 +219,10 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
|
||||
|
||||
// Testing USB detection
|
||||
#define NRF_APM
|
||||
// If using a power chip like the INA3221 you can override the default battery voltage channel below
|
||||
// and comment out NRF_APM to use the INA3221 instead of the USB detection for charging
|
||||
// #define INA3221_BAT_CH INA3221_CH2
|
||||
// #define INA3221_ENV_CH INA3221_CH1
|
||||
|
||||
// enables 3.3V periphery like GPS or IO Module
|
||||
// Do not toggle this for GPS power savings
|
||||
|
||||
@@ -0,0 +1,51 @@
|
||||
; NomadStar Meteor Pro based on RAK4631 with RGBW LED LP5562 support
|
||||
[env:rak4631_nomadstar_meteor_pro]
|
||||
extends = nrf52840_base
|
||||
board = wiscore_rak4631
|
||||
board_check = true
|
||||
build_flags = ${nrf52840_base.build_flags} -Ivariants/rak4631_nomadstar_meteor_pro -D NOMADSTAR_METEOR_PRO
|
||||
-L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
|
||||
;-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
|
||||
-DEINK_DISPLAY_MODEL=GxEPD2_213_BN
|
||||
-DEINK_WIDTH=250
|
||||
-DEINK_HEIGHT=122
|
||||
-DRADIOLIB_EXCLUDE_SX128X=1
|
||||
-DRADIOLIB_EXCLUDE_SX127X=1
|
||||
-DRADIOLIB_EXCLUDE_LR11X0=1
|
||||
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak4631_nomadstar_meteor_pro> +<mesh/api/> +<mqtt/>
|
||||
lib_deps =
|
||||
${nrf52840_base.lib_deps}
|
||||
https://github.com/NomadStar-outdoor/IOBoard-RGB-LP5562-Library.git#9c366c8
|
||||
|
||||
; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
|
||||
; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
|
||||
;upload_protocol = jlink
|
||||
|
||||
; Allows programming and debug via the RAK NanoDAP as the default debugger tool for the RAK4631 (it is only $10!)
|
||||
; programming time is about the same as the bootloader version.
|
||||
; For information on this see the meshtastic developers documentation for "Development on the NRF52"
|
||||
[env:rak4631_nomadstar_meteor_pro_dbg]
|
||||
extends = env:rak4631_nomadstar_meteor_pro
|
||||
board_level = extra
|
||||
|
||||
; if the builtin version of openocd has a buggy version of semihosting, so use the external version
|
||||
; platform_packages = platformio/tool-openocd@^3.1200.0
|
||||
|
||||
build_flags =
|
||||
${env:rak4631.build_flags}
|
||||
-D USE_SEMIHOSTING
|
||||
|
||||
lib_deps =
|
||||
${env:rak4631.lib_deps}
|
||||
https://github.com/geeksville/Armduino-Semihosting/archive/35b538fdf208c3530c1434cd099a08e486672ee4.zip
|
||||
|
||||
; NOTE: the pyocd support for semihosting is buggy. So I switched to using the builtin platformio support for the stlink adapter which worked much better.
|
||||
; However the built in openocd version in platformio has buggy support for TCP to semihosting.
|
||||
;
|
||||
; So I'm now trying the external openocd - but the openocd scripts for nrf52.cfg assume you are using a DAP adapter not an STLINK adapter.
|
||||
; In theory I could change those scripts. But for now I'm trying going back to a DAP adapter but with the external openocd.
|
||||
|
||||
upload_protocol = stlink
|
||||
; eventually use platformio/tool-pyocd@^2.3600.0 instad
|
||||
;upload_protocol = custom
|
||||
;upload_command = pyocd flash -t nrf52840 $UPLOADERFLAGS $SOURCE
|
||||
@@ -0,0 +1,45 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include "variant.h"
|
||||
#include "nrf.h"
|
||||
#include "wiring_constants.h"
|
||||
#include "wiring_digital.h"
|
||||
|
||||
const uint32_t g_ADigitalPinMap[] = {
|
||||
// P0
|
||||
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
|
||||
|
||||
// P1
|
||||
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
|
||||
|
||||
void initVariant()
|
||||
{
|
||||
// LED1 & LED2
|
||||
pinMode(PIN_LED1, OUTPUT);
|
||||
ledOff(PIN_LED1);
|
||||
|
||||
pinMode(PIN_LED2, OUTPUT);
|
||||
ledOff(PIN_LED2);
|
||||
|
||||
// 3V3 Power Rail
|
||||
pinMode(PIN_3V3_EN, OUTPUT);
|
||||
digitalWrite(PIN_3V3_EN, HIGH);
|
||||
}
|
||||
@@ -0,0 +1,271 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef _VARIANT_RAK4630_
|
||||
#define _VARIANT_RAK4630_
|
||||
|
||||
#define RAK4630
|
||||
|
||||
/** Master clock frequency */
|
||||
#define VARIANT_MCK (64000000ul)
|
||||
|
||||
#define USE_LFXO // Board uses 32khz crystal for LF
|
||||
// define USE_LFRC // Board uses RC for LF
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#include "WVariant.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif // __cplusplus
|
||||
|
||||
// Number of pins defined in PinDescription array
|
||||
#define PINS_COUNT (48)
|
||||
#define NUM_DIGITAL_PINS (48)
|
||||
#define NUM_ANALOG_INPUTS (6)
|
||||
#define NUM_ANALOG_OUTPUTS (0)
|
||||
|
||||
// LEDs
|
||||
#define PIN_LED1 (35)
|
||||
#define PIN_LED2 (36)
|
||||
|
||||
#define LED_BUILTIN PIN_LED1
|
||||
#define LED_CONN PIN_LED2
|
||||
|
||||
#define LED_GREEN PIN_LED1
|
||||
#define LED_BLUE PIN_LED2
|
||||
|
||||
#define LED_STATE_ON 1 // State when LED is litted
|
||||
|
||||
/*
|
||||
* Buttons
|
||||
*/
|
||||
|
||||
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
|
||||
#define BUTTON_NEED_PULLUP
|
||||
#define PIN_BUTTON2 12
|
||||
#define PIN_BUTTON3 24
|
||||
#define PIN_BUTTON4 25
|
||||
|
||||
/*
|
||||
* Analog pins
|
||||
*/
|
||||
#define PIN_A0 (5)
|
||||
#define PIN_A1 (31)
|
||||
#define PIN_A2 (28)
|
||||
#define PIN_A3 (29)
|
||||
#define PIN_A4 (30)
|
||||
#define PIN_A5 (31)
|
||||
#define PIN_A6 (0xff)
|
||||
#define PIN_A7 (0xff)
|
||||
|
||||
static const uint8_t A0 = PIN_A0;
|
||||
static const uint8_t A1 = PIN_A1;
|
||||
static const uint8_t A2 = PIN_A2;
|
||||
static const uint8_t A3 = PIN_A3;
|
||||
static const uint8_t A4 = PIN_A4;
|
||||
static const uint8_t A5 = PIN_A5;
|
||||
static const uint8_t A6 = PIN_A6;
|
||||
static const uint8_t A7 = PIN_A7;
|
||||
#define ADC_RESOLUTION 14
|
||||
|
||||
// Other pins
|
||||
#define PIN_AREF (2)
|
||||
#define PIN_NFC1 (9)
|
||||
#define PIN_NFC2 (10)
|
||||
|
||||
static const uint8_t AREF = PIN_AREF;
|
||||
|
||||
/*
|
||||
* Serial interfaces
|
||||
*/
|
||||
#define PIN_SERIAL1_RX (15)
|
||||
#define PIN_SERIAL1_TX (16)
|
||||
|
||||
// Connected to Jlink CDC
|
||||
#define PIN_SERIAL2_RX (8)
|
||||
#define PIN_SERIAL2_TX (6)
|
||||
|
||||
/*
|
||||
* SPI Interfaces
|
||||
*/
|
||||
#define SPI_INTERFACES_COUNT 2
|
||||
|
||||
#define PIN_SPI_MISO (45)
|
||||
#define PIN_SPI_MOSI (44)
|
||||
#define PIN_SPI_SCK (43)
|
||||
|
||||
#define PIN_SPI1_MISO (29) // (0 + 29)
|
||||
#define PIN_SPI1_MOSI (30) // (0 + 30)
|
||||
#define PIN_SPI1_SCK (3) // (0 + 3)
|
||||
|
||||
static const uint8_t SS = 42;
|
||||
static const uint8_t MOSI = PIN_SPI_MOSI;
|
||||
static const uint8_t MISO = PIN_SPI_MISO;
|
||||
static const uint8_t SCK = PIN_SPI_SCK;
|
||||
|
||||
/*
|
||||
* eink display pins
|
||||
*/
|
||||
|
||||
#define PIN_EINK_CS (0 + 26)
|
||||
#define PIN_EINK_BUSY (0 + 4)
|
||||
#define PIN_EINK_DC (0 + 17)
|
||||
#define PIN_EINK_RES (-1)
|
||||
#define PIN_EINK_SCLK (0 + 3)
|
||||
#define PIN_EINK_MOSI (0 + 30) // also called SDI
|
||||
|
||||
// #define USE_EINK
|
||||
|
||||
// Texas Instrument LP5562
|
||||
#define HAS_LP5562
|
||||
#define ENABLE_AMBIENTLIGHTING
|
||||
|
||||
/*
|
||||
* Wire Interfaces
|
||||
*/
|
||||
#define WIRE_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_WIRE_SDA (13)
|
||||
#define PIN_WIRE_SCL (14)
|
||||
|
||||
// QSPI Pins
|
||||
#define PIN_QSPI_SCK 3
|
||||
#define PIN_QSPI_CS 26
|
||||
#define PIN_QSPI_IO0 30
|
||||
#define PIN_QSPI_IO1 29
|
||||
#define PIN_QSPI_IO2 28
|
||||
#define PIN_QSPI_IO3 2
|
||||
|
||||
// On-board QSPI Flash
|
||||
#define EXTERNAL_FLASH_DEVICES IS25LP080D
|
||||
#define EXTERNAL_FLASH_USE_QSPI
|
||||
|
||||
/* @note RAK5005-O GPIO mapping to RAK4631 GPIO ports
|
||||
RAK5005-O <-> nRF52840
|
||||
IO1 <-> P0.17 (Arduino GPIO number 17)
|
||||
IO2 <-> P1.02 (Arduino GPIO number 34)
|
||||
IO3 <-> P0.21 (Arduino GPIO number 21)
|
||||
IO4 <-> P0.04 (Arduino GPIO number 4)
|
||||
IO5 <-> P0.09 (Arduino GPIO number 9)
|
||||
IO6 <-> P0.10 (Arduino GPIO number 10)
|
||||
IO7 <-> P0.28 (Arduino GPIO number 28)
|
||||
SW1 <-> P0.01 (Arduino GPIO number 1)
|
||||
A0 <-> P0.04/AIN2 (Arduino Analog A2
|
||||
A1 <-> P0.31/AIN7 (Arduino Analog A7
|
||||
SPI_CS <-> P0.26 (Arduino GPIO number 26)
|
||||
*/
|
||||
|
||||
// RAK4630 LoRa module
|
||||
|
||||
/* Setup of the SX1262 LoRa module ( https://docs.rakwireless.com/Product-Categories/WisBlock/RAK4631/Datasheet/ )
|
||||
|
||||
P1.10 NSS SPI NSS (Arduino GPIO number 42)
|
||||
P1.11 SCK SPI CLK (Arduino GPIO number 43)
|
||||
P1.12 MOSI SPI MOSI (Arduino GPIO number 44)
|
||||
P1.13 MISO SPI MISO (Arduino GPIO number 45)
|
||||
P1.14 BUSY BUSY signal (Arduino GPIO number 46)
|
||||
P1.15 DIO1 DIO1 event interrupt (Arduino GPIO number 47)
|
||||
P1.06 NRESET NRESET manual reset of the SX1262 (Arduino GPIO number 38)
|
||||
|
||||
Important for successful SX1262 initialization:
|
||||
|
||||
* Setup DIO2 to control the antenna switch
|
||||
* Setup DIO3 to control the TCXO power supply
|
||||
* Setup the SX1262 to use it's DCDC regulator and not the LDO
|
||||
* RAK4630 schematics show GPIO P1.07 connected to the antenna switch, but it should not be initialized, as DIO2 will do the
|
||||
control of the antenna switch
|
||||
|
||||
SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
|
||||
|
||||
*/
|
||||
|
||||
#define DETECTION_SENSOR_EN 4
|
||||
|
||||
#define USE_SX1262
|
||||
#define SX126X_CS (42)
|
||||
#define SX126X_DIO1 (47)
|
||||
#define SX126X_BUSY (46)
|
||||
#define SX126X_RESET (38)
|
||||
// #define SX126X_TXEN (39)
|
||||
// #define SX126X_RXEN (37)
|
||||
#define SX126X_POWER_EN (37)
|
||||
// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
|
||||
#define SX126X_DIO2_AS_RF_SWITCH
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
|
||||
// Testing USB detection
|
||||
#define NRF_APM
|
||||
|
||||
// enables 3.3V periphery like GPS or IO Module
|
||||
// Do not toggle this for GPS power savings
|
||||
#define PIN_3V3_EN (34)
|
||||
|
||||
// RAK1910 GPS module
|
||||
// If using the wisblock GPS module and pluged into Port A on WisBlock base
|
||||
// IO1 is hooked to PPS (pin 12 on header) = gpio 17
|
||||
// IO2 is hooked to GPS RESET = gpio 34, but it can not be used to this because IO2 is ALSO used to control 3V3_S power (1 is on).
|
||||
// Therefore must be 1 to keep peripherals powered
|
||||
// Power is on the controllable 3V3_S rail
|
||||
// #define PIN_GPS_RESET (34)
|
||||
// #define PIN_GPS_EN PIN_3V3_EN
|
||||
#define PIN_GPS_PPS (17) // Pulse per second input from the GPS
|
||||
|
||||
#define GPS_RX_PIN PIN_SERIAL1_RX
|
||||
#define GPS_TX_PIN PIN_SERIAL1_TX
|
||||
|
||||
// Define pin to enable GPS toggle (set GPIO to LOW) via user button triple press
|
||||
|
||||
// RAK18001 Buzzer in Slot C
|
||||
// #define PIN_BUZZER 21 // IO3 is PWM2
|
||||
// NEW: set this via protobuf instead!
|
||||
|
||||
// Battery
|
||||
// The battery sense is hooked to pin A0 (5)
|
||||
#define BATTERY_PIN PIN_A0
|
||||
// and has 12 bit resolution
|
||||
#define BATTERY_SENSE_RESOLUTION_BITS 12
|
||||
#define BATTERY_SENSE_RESOLUTION 4096.0
|
||||
#undef AREF_VOLTAGE
|
||||
#define AREF_VOLTAGE 3.0
|
||||
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
|
||||
#define ADC_MULTIPLIER 1.73
|
||||
|
||||
#define HAS_RTC 0
|
||||
|
||||
#define HAS_ETHERNET 0
|
||||
|
||||
#define RAK_4631 1
|
||||
|
||||
#define PIN_ETHERNET_RESET 21
|
||||
#define PIN_ETHERNET_SS PIN_EINK_CS
|
||||
#define ETH_SPI_PORT SPI1
|
||||
#define AQ_SET_PIN 10
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#endif
|
||||
@@ -142,7 +142,6 @@ static const uint8_t SCL = PIN_WIRE_SCL;
|
||||
#define PIN_GPS_RX D6
|
||||
#define PIN_GPS_TX D7
|
||||
#define HAS_GPS 1
|
||||
#define GPS_BAUDRATE 9600
|
||||
#define GPS_THREAD_INTERVAL 50
|
||||
#define PIN_SERIAL1_RX PIN_GPS_TX
|
||||
#define PIN_SERIAL1_TX PIN_GPS_RX
|
||||
|
||||
@@ -67,7 +67,9 @@ build_flags =
|
||||
; -D USE_DOUBLE_BUFFER
|
||||
-D USE_PACKET_API
|
||||
-D MAP_FULL_REDRAW
|
||||
-D CUSTOM_TOUCH_DRIVER
|
||||
|
||||
lib_deps =
|
||||
${env:t-deck.lib_deps}
|
||||
${device-ui_base.lib_deps}
|
||||
https://github.com/bitbank2/bb_captouch/archive/refs/tags/1.3.1.zip
|
||||
|
||||
Reference in New Issue
Block a user