Audit of the custom_meshtastic_* manifest on the variants backing the
newest boards, against the protobuf HardwareModel enum, the compiled
HW_VENDOR, the board flash size and the artwork actually published by
the web flasher. No support flag changes here - actively_supported is
left exactly as each variant already had it.
ThinkNode M9 had no HW_VENDOR arm, so every M9 has been reporting
PRIVATE_HW while its manifest advertised 131; add the mapping and
rename the slug to the enum name (THINKNODE_M9) it is meant to mirror.
Seeed SenseCAP Mesh-Tracker X1 moves from the PR matrix to release, and
its images entry now points at seeed_mesh_tracker_x1.svg, which is what
the flasher actually ships - the hyphenated name resolved to nothing.
T-Beam BPF, T-Beam 1W and Heltec Wireless Tracker V2 declared the
architecture as "esp32s3"; the value is copied verbatim into the
manifest, and the flash flow matches on the normalized "esp32-s3".
T-Beam BPF and M5Stack Unit C6L both build default_16MB.csv on 16 MB
flash but declared no partition scheme, which leaves the flasher on the
4 MB fallback offsets for a legacy clean install.
Meshnology W10 and W12 gain the artwork and vendor tag that already
exist for them.
* Add T-Beam BPF (144-148 Mhz LoRa)
* minor correction to fix compiler warnings
* Add T-Beam BPF (144-148 Mhz LoRa)
* minor correction to fix compiler warnings
* Add ITU regions for this device and make GPS work.
* Switch pin after defining it as output
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Lora CS is indeed 1, SD Card CS is 10
* Include the back option.
* Fix compilation with pioarduino (USB_MODE)
* Default ham to narrow_fast
* Default PROFILE_HAM to slot 17
This is an appropriate default in the USA but not the EU.
The slot override really should follow the region itself, not the regionprofile.
* Fix for ITU 2/3 split
* Add ITU region options to MenuAction enum
* Add HAS_HAM_2M definition to variant headers for 2M support
* Re-add PROFILE_HAM regionprofile
Accidentally removed in last merge
* Trunk fmt
* Initial default slots
* Switch to TinyFast
Still need to flesh out the default channels
* Adjust slotOverrides for TinyFast
* RadioLib doesn't accept 15.625 kHz
Use 15.6 instead
* Set RF95 pins for T-Beam Supreme
May cause regressions!!
* Remove other-variant changes (BPF-only)
These have been moved to other PRs
* Remove mismatch guarding (we need a more comprehensive approach)
* Add comment back
* Add template for PA curve
* This is a 5-6W radio!! Add TX_GAIN_LORA
* Trunk fmt because NomDeTom hates emdashes
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Ben Meadors