* nrf52: drop BSEC2/BME68x from the three targets nearest the flash cap
nrf52_promicro_diy_tcxo has been failing the nrf52_warm_region guard on
develop since 2026-08-05 (image ends at 0xEA918, 2328 B past the 0xEA000
warm-store cap). rak4631 and rak_wismesh_repeater_mini are ~14 KiB clear
while the nrf52 fleet drifts ~2 KiB/day, so both are close behind.
lib_ignore bsec2 + BME68x Sensor library defeats BME680Sensor's
__has_include(<bsec2.h>) gate, recovering ~46 KiB on each:
nrf52_promicro_diy_tcxo 0xEA918 (FAILED) -> 0xDF1A8, 43.6 KiB clear
rak4631 0xE6550 -> 0xDADE8, 60.0 KiB clear
rak_wismesh_repeater_mini 0xE65AC -> 0xDAE64, 59.9 KiB clear
This costs BME680/BME688 support, i.e. RAK1906 on WisBlock. It is a
temporary measure until the environmental sensor roster is opt-in per
board rather than linked into every target.
rak_wismesh_pocket inherits from env:rak4631 but has ~37 KiB clear, so it
is explicitly held at the nrf52 default and keeps BME680. Both lib_ignore
lists extend ${nrf52_base.lib_ignore} so BluetoothOTA and lvgl stay
ignored.
* nrf52: give the RAK boards BME680 back, drop their Ethernet instead
Excluding BSEC2 on rak4631 cost BME680/BME688 support, i.e. the RAK1906
WisBlock module - a common peripheral on the most popular nrf52 board. The
Ethernet stack is the better thing to lose: RAK13800 W5100S users are served
by the dedicated env:rak4631_eth_gw build, which has its own variant.h and
~163 KB clear, so the general-purpose image was carrying a networking stack
for hardware almost none of its users have.
rak_wismesh_pocket already set HAS_ETHERNET 0 for the same reason, so this
follows an existing in-tree precedent rather than inventing one.
rak4631 0xE6578 -> 0xE0D08, 35.7 KB clear (-21.6 KB)
rak_wismesh_repeater_mini -> 0xE0D58, 35.7 KB clear
rak4631_eth_gw -> 0xC1050, 163 KB clear (unchanged)
rak4631_eth_gw_dbg -> 0xC1210, 163 KB clear
That also brings rak4631 back under its declared flash budget in
bin/ram_budgets.json (766,216 vs 786,000 bytes), which develop is currently
failing - size-budget-gate is what has been ejecting PRs from the merge queue.
mqtt/ is deliberately kept: src/mqtt/MQTT.cpp carries both the networked
client (gated on HAS_NETWORKING, now 0) and the phone client-proxy path, so
dropping the directory would have removed MQTT-over-phone as well.
nrf52_promicro_diy_tcxo keeps the BSEC2 exclusion from the previous commit.
It has no Ethernet to reclaim - nrf52_base already filters mesh/eth, mesh/api
and mesh/wifi, and HAS_ETHERNET defaults to 0 - so the sensor library is the
only lever there. It goes 0xEA918 (FAILED) -> 0xDF1C0, 43.6 KB clear.
env:rak4631_eth_gw_dbg now extends env:rak4631_eth_gw rather than env:rak4631:
it already used the gateway env's build_flags and lib_deps, and only that env
still compiles mesh/eth + mesh/api.
* Address CodeRabbit review comments on PR #11363
- Condense the HAS_ETHERNET comment in rak4631/variant.h to one line
- Clarify rak4631/platformio.ini src-filter comment: Ethernet-free,
not networking-free, since MQTT is retained
- Restore custom_meshtastic_* metadata on env:rak4631_eth_gw so
env:rak4631_eth_gw_dbg (which now extends it) doesn't lose the
hw_model/display metadata it previously inherited via env:rak4631
---------
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: Claude <noreply@anthropic.com>
PIN_GPS_EN was only set for Pocket, so GPS Off left 3V3_S on forRepeater Mini. Gate it on WISMESH_POCKET || WISMESH_REPEATER_MINIso generic rak4631 bases keep sensors powered.
* dependency swap - INA3221Sensor
update INA3221 initialization and measurement methods for compatibility with Rob Tillaart's library
Co-authored-by: Copilot <copilot@github.com>
* Addresses copilot review
Co-authored-by: Copilot <copilot@github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Refine comments on USB detection and INA3221
Updated comments regarding USB detection and INA3221 usage.
* Fix static_assert conditions for INA3221 channel definitions
Co-authored-by: Copilot <copilot@github.com>
* moved macro defines earlier to allow better use.
Co-authored-by: Copilot <copilot@github.com>
* Add raw register read methods for bus voltage and shunt current in INA3221Sensor
Co-authored-by: Copilot <copilot@github.com>
---------
Co-authored-by: Copilot <copilot@github.com>
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Remove noop CANNED_MESSAGE_MODULE_ENABLE define
* Remove over-eager warning removal
* Remove unused LED_CONN
* Dead defines removal
* Rename oddball LED pin name
* Rename second oddball LED pin name
* Remove another dead define
* Just set LED_BUILTIN universally to -1, as we don't use it.
* LUD_BUILTIN workarounds
* Squash the LED_BUILTINs that sneaked in
* Don't kill valid pin derfine
I thought git would be smart enough to understand all the whitespace changes but even with all the flags I know to make it ignore theses it still blows up if there are identical changes on both sides.
I have a solution but it require creating a new commit at the merge base for each conflicting PR and merging it into develop.
I don't think blowing up all PRs is worth for now, maybe if we can coordinate this for V3 let's say.
This reverts commit 0d11331d18.
* Make RAK4631 nodes power back on deep sleep
The devices will hang if the VBAT goes under 1.7V (Brown-out reset) and
they will never come back unless power supply goes completely off.
This kills unattended nodes.
Using the SystemOff the LPCOMP we can get the nodes back again when
power comes back, even if VBAT goes under 1.7V, which moreover is more
unlikely because the device is off.
* Adding support for heltec t114
And moved particularities to variant.h
* Remove old cpp comment that belongs to variant.h
It was a leftover.
* Trunk fix
---------
Co-authored-by: Tom Fifield <tom@tomfifield.net>
