mirror of
https://github.com/alexhopeoconnor/firmware.git
synced 2026-10-14 07:21:30 +10:00
1872e5b306f824d11a3c0620ca7bde3af3744ea0
45
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Thomas GöttgensandBen Meadors
|
d4aa7760cc |
Use hardware RNG for session passkey and PKC extra nonce (#11047)
* Use hardware RNG for session passkey and PKC extra nonce The admin session passkey and the Curve25519 extra nonce were drawn from Arduino random(), which is not a CSPRNG. Source them from HardwareRNG::fill, mirroring the signing path, and fall back to the seeded CSPRNG (CryptRNG) only when no hardware source is available. * AdminModule: make session passkey expiry rollover-safe session_time was compared as millis()/1000 seconds with additive thresholds, which breaks across the millis() wrap and could keep a stale admin session key valid. Store session_time in millis() and use Throttle::isWithinTimespanMs for the 150s refresh and 300s validity windows. * AdminModule: track session passkey validity with an explicit flag session_time == 0 was used as the uninitialized sentinel, but millis() is legitimately 0 in the first millisecond of uptime, so a passkey issued then would be treated as no session. Use a dedicated session_passkey_valid flag instead. * AdminModule: camelCase the session passkey validity flag --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Thomas Göttgens
|
8147970957 |
AdminModule: only accept admin responses to requests we sent (#11024)
* AdminModule: only accept admin responses to requests we sent An admin *_response short-circuited the auth and session-passkey checks that gate every other admin message, so any node could deliver one. On a channel the module listens to unauthenticated, a get_module_config_response drives the remote-hardware pin handler with attacker-supplied values. Track the destination of outgoing admin requests (per remote, with the pinned PKC key when there is one) and accept a response only from a node with a matching outstanding request, inside the same window as the session passkey. Local (from == 0) admin is unchanged; PhoneAPI already gates it. Also fix the response dispatch: get_module_config_response.which_payload_variant is a ModuleConfig oneof tag, but it was compared against the AdminMessage ModuleConfigType enum (different numbering), so the handler never ran. Compare against the oneof tag. * AdminModule: rollover-safe request window, bind response to request type Two review refinements to the request/response pairing: Use Throttle::isWithinTimespanMs for the outstanding-request expiry instead of comparing millis()/1000 sums, which mis-expired across the millis() rollover. Bind each accepted response to a request type actually sent to that node. Each outstanding record now carries a bitmask of the response variants its requests authorize, so a get_owner request no longer admits a get_module_config response. The mask accumulates per remote, so a client may still pipeline several request types to one node and have every answer accepted. * AdminModule: track admin requests per-request, not per-node Reworks the outstanding-request table so each request is its own entry with its own expiry window and pinned key, replacing the per-node bitmask that shared one timestamp and one key across every response variant. That sharing let a later request to the same node extend an earlier one's window and, worse, clear its PKC pin: an unpinned request cleared keyValid, so a plaintext response to an earlier PKC-pinned request was then accepted. Per-request entries keep each pin intact. Identical requests are de-duplicated (a client may fetch several config subtypes, all answered by one response variant) and eviction compares elapsed time, which is rollover-safe. Test: a pinned request's response still requires its key after an unpinned request to the same node. * AdminModule: match module-config subtype and consume answered requests Two refinements to the request/response pairing: Only remote_hardware get_module_config_response mutates state (the pin table), so it must answer a request for that exact ModuleConfigType, not just any module-config request. Each entry records the requested subtype and the gate checks it. A matched request is now consumed on accept, so a node cannot replay a state-mutating response within the window. Because one request yields one response, request de-dup is dropped (a client's N indexed get_channel requests are N entries, each consumed once). Tests: a non-remote-hardware request does not admit a remote_hardware response, and a second copy of an answered response is rejected. |
||
|
|
5513c36757 |
Add helpful checks of channel names and PSK (#10792)
* added warnings from firmware for simple channel setting mistakes * more and better checks * one ping only * Drop literal 'AQ==' from blank-PSK channel warnings The base64 encoding of the default channel key isn't something a user should type in by hand; state the condition instead of a raw key value. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Claude <noreply@anthropic.com> |
||
|
TomandClaude Fable 5
|
d846780a9b |
More fuzz tests and small fixes for the findings (#10864)
* first pass tests * more tests * Fix two crafted-admin-packet crashes found by the E5 fuzzer Both are reachable from an authorized admin (local from==0, admin channel, or PKC) - remote DoS: 1. SIGFPE in LoRa config validation. A set_config LoRaConfig with use_preset=false and bandwidth=0 makes freqSlotWidth 0, so numFreqSlots is 0 and `hash(name) % numFreqSlots` (RadioInterface.cpp) divides by zero. Guard the modulo; the existing channel_num check then rejects/ clamps the config. 2. Stack overflow in Channels::getKey. A SECONDARY channel at the primary slot with an empty PSK recursed into getKey(primaryIndex) forever. Skip the primary-key borrow when chIndex == primaryIndex. Re-enable the E5 admin fuzzer to hit both triggers again (use_preset both ways incl. bandwidth 0, plus the set_channel tag) as regression guards. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Correct fuzz-test invariants after the crash fixes - E5 admin fuzz: node eviction under a filling NodeDB is legitimate, so assert only the bounded-count invariant, not that a specific seed node survives 6000 mutating ops. - TMM blitz: scope off the nodeinfo direct-response send path (it needs a fully-wired MeshService/phone queue the fixture doesn't provide; the deterministic directResponse tests cover it). The crafted-nodenum rate/unknown/position cache stress is unchanged. clod helped too * realistic tests * test: dedup fuzz RNG into shared test/support/DeterministicRng.h The four in-tree fuzz suites (test_fuzz_decode, test_fuzz_packets, test_hop_scaling, test_traffic_management) each carried a byte-identical copy of the seeded 64-bit LCG (rngSeed/rngNext/rngByte/rngRange). Hoist it into one shared header so there is a single generator to reason about and no risk of the copies drifting. static inline keeps per-suite state per translation unit and avoids -Wunused-function for suites that don't use every helper. Also corrects a stale comment in test_traffic_management (the blitz's nodeinfo direct-response path is intentionally left off). No behavioral change: same constants, same per-suite seeds. clod helped too * test: fuzz uncovered ProtobufModule handlers and the MQTT downlink ingress Extend the in-tree fuzz coverage to packet sources that previously had none: - test_fuzz_packets E8/E9/E10: drive PositionModule, DeviceTelemetryModule and NeighborInfoModule at handleReceivedProtobuf directly (via using-shims, bypassing the ProtobufModule reply/send path so no router is needed). The fixture already stands up nodeDB/service/channels, and nodeStatus/powerStatus are auto-initialized in main.cpp, so no new globals are required. Adds a shared fuzzRxHeader() helper for crafting adversarial RX packet headers. - test_fuzz_decode: add meshtastic_KeyVerification to the decode table. The KeyVerification and StoreForward handler paths are documented as decode-level only, with the concrete reason each is intrinsic (private-state gating / PSRAM + self-pointer wiring), not a fixture gap. - test_mqtt: test_receiveFuzzServiceEnvelope blitzes the non-RF broker-push ingress (onReceiveProto) two ways - raw garbage bytes that must fail envelope decode cleanly, and a well-formed ServiceEnvelope wrapping a crafted inner MeshPacket over crafted channel_id/gateway_id - exercising the channel match, isFromUs, XEdDSA receive policy and perhapsDecode chain. Adds a deliverRaw() passthrough to MQTTUnitTest. All under the coverage env (ASan/LSan). No firmware/src changes. Full sweep GREEN 27/27, 544 cases. clod helped too * Harden LoRa/channel config against crafted admin messages; consolidate test helpers Production (review findings on the hot-fuzz crash fixes): - Clamp bandwidth at the source (clampBandwidthKHz) in checkOrClampConfigLora and applyModemConfig so numFreqSlots can never be 0 for any consumer; a bandwidth-0 set_config previously passed validation and re-armed the SIGFPE on the next applyModemConfig. - Guard applyModemConfig's hash % numFreqSlots (the validator's sibling modulo was fixed earlier but this one was still unguarded). - Enforce the primary-channel invariant in Channels::onConfigChanged: a config demoting every slot now re-promotes the stale SECONDARY slot (keeping its key) or restores the default channel if the slot is DISABLED, instead of leaving every getPrimaryIndex() reader on a non-primary slot. The getKey recursion guard stays as defense-in-depth. Tests: - New test/support/MockMeshService.h and AdminModuleTestShim.h replace four byte-identical mocks and three divergent admin shims (test_mqtt's capturing mock is genuinely different and stays). - DeterministicRng.h: add rngFill() (replaces 14 hand-rolled fill loops) and rngEdgeNodeNum() (unifies the three NodeNum boundary pools). - Extract fuzzChannelSettings() shared by the set_channel case and fuzzBeacon. - fuzzBeacon: the un-terminated branch now fills the whole buffer with non-NUL bytes so the strnlen bound is actually stressed (~50% of iterations, not ~4%). - E6 beacon fuzz: replace the TEST_ASSERT_TRUE(true) tautology with real invariants (handler never consumes; offers land in lastReceivedOffer keyed to the sender). - Trim the seven over-long comment blocks flagged against the 1-2 line rule; the FINDINGS trailer moves to this commit message (see production notes). Full native suite GREEN 27/27 under the coverage (ASan/LSan) env. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Clamp UTF-8 char length in the emote walkers; add test_fuzz_emotes A TEXT_MESSAGE payload is opaque protobuf bytes, so PB_VALIDATE_UTF8 never screens it - invalid UTF-8 and truncated multi-byte lead bytes reach the emote/width render path verbatim. EmoteRenderer's walkers advanced by utf8CharLen(lead) without clamping to the bytes actually remaining, so a truncated lead (e.g. a lone 0xF0, which claims 4 bytes) near the end of the buffer made getUtf8ChunkWidth's memcpy read past the string. ASan confirms a heap-buffer-overflow READ from measureStringWithEmotes. Add utf8CharLenClamped() and use it at every walk site (width measure, truncation cut-loop, and the draw-path text-run/chunk builders); the one already-guarded site (matchAtIgnoringModifiers) is unchanged. New test/test_fuzz_emotes drives measureStringWithEmotes and truncateToWidth over adversarial byte strings (biased to embed/end in truncated multi-byte leads) in exact-sized heap buffers so any over-read is a hard ASan fault. Its headless display uses a synthetic font (firstChar 0, fontData centered in a large buffer) so the stock OLEDDisplay::getStringWidth - which indexes the font jump table with a signed char and over-reads for any byte >= 0x80 - does not mask the finding. native-suite-count bumped 27 -> 28. Full native suite GREEN 28/28 under the coverage (ASan/LSan) env. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Keep emote width measurement in-bounds for non-ASCII bytes OLEDDisplay::getStringWidth (the utf8=false path EmoteRenderer uses on default builds) indexes the font jump table by (c - firstChar) with a signed char and no bounds check, so any byte outside printable ASCII - high bytes from UTF-8 text, but also a stray control byte like 0x0A - reads outside the font array. On-device this reads adjacent flash and returns a garbage width; under ASan the test_fuzz_emotes fuzzer flags it as a global-buffer-overflow, and it made the non-ASCII width measurement meaningless either way. The OLED driver is a pinned upstream dependency, so guard it firmware-side in EmoteRenderer's getStringWidth helper: measure a sanitized copy where any byte outside [0x20, 0x7E] counts as a '?' placeholder. Printable ASCII is unchanged and the UA/RU lookup path is untouched. test_fuzz_emotes now drives a real ArialMT font instead of the synthetic in-bounds font it needed before this fix, so the suite exercises the true production width path (utf8CharLen clamp + this sanitizer) end to end. The same fuzzer tripped the global-buffer-overflow before this change. Full native suite GREEN 28/28 under the coverage (ASan/LSan) env. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
Ben Meadors
|
0488a46a3c |
fix: stop unexpected NodeNum regeneration from PKI key loss (#10808)
* fix: stop unexpected NodeNum regeneration from PKI key loss A node's NodeNum is derived from its PKI public key (my_node_num == crc32(public_key)), so it changes only when the keypair is regenerated -- which happens only when a keygen path runs while config.security.private_key.size != 32. Two paths could trigger that without the user intending a new identity: 1. Boot: loadFromDisk() collapsed every non-success loadProto() result for the config file into installDefaultConfig() (preserveKey=false), which memset()s config and wipes the private key. loadProto() distinguishes DECODE_FAILED (file present but undecodable/undecryptable) from OTHER_FAILURE (absent), so a transient/corrupt read silently minted a new identity. A new configDecodeFailed flag now gates the boot keygen and the boot config-save directly (not via region, so it survives the userprefs/region overrides that run later in loadFromDisk): identity is frozen, the unreadable file is left intact for a later clean boot to recover, and the node boots radio-silent (region UNSET, TX off). A genuinely-absent config still gets defaults + keygen. 2. AdminModule security SET: config.security = c.payload_variant.security wholesale-clobbered the keypair, then regenerated whenever the incoming private_key.size != 32. A client editing an unrelated security field without round-tripping the private key would re-mint identity. The existing keypair is now preserved when the incoming config omits it; first provisioning and key import are unchanged. Intentional reset goes through factory_reset. Native PlatformIO unit suite (Docker): 499/499 test cases pass. * test: cover security keypair preservation; clarify load-failure comment Addresses PR review feedback: - Add native unit tests (test_admin_radio) asserting handleSetConfig preserves the existing identity keypair when a security SET omits the private key, and applies a full supplied keypair (key import). Guards against reintroduced NodeNum/keypair regeneration. AdminModuleTestShim (now a friend) defers saves so the lightweight harness doesn't saveToDisk an uninitialized node database. - Clarify the non-DECODE_FAILED config-load comment: OTHER_FAILURE / NO_FILESYSTEM cover an absent or unopenable file, not just first boot. |
||
|
|
ec5d230305 |
Feat/mesh beacon (#10618)
* Tips robot virtual node / relayer to different LoRa modes & channels
Note that this commit has details hardcoded for the Wellington (NZ)
mesh, and also requires the following patch to the protobufs:
-----
diff --git a/meshtastic/mesh.proto b/meshtastic/mesh.proto
index 03162d8..ec54c99 100644
--- a/meshtastic/mesh.proto
+++ b/meshtastic/mesh.proto
@@ -1393,6 +1393,21 @@ message MeshPacket {
* Set by the firmware internally, clients are not supposed to set this.
*/
uint32 tx_after = 20;
+
+ /*
+ * The modem preset to use fo rthis packet
+ */
+ uint32 modem_preset = 21;
+
+ /*
+ * The frequency slot to use for this packet
+ */
+ uint32 frequency_slot = 22;
+
+ /*
+ * Whether the packet has a nonstandard radio config
+ */
+ bool nonstandard_radio_config = 23;
}
/*
-----
* fix: repair mesh tips CI build
* feat: add MeshBeacon module (Phase 1 — proto + generated code + initial stub)
* feat(beacon): implement broadcaster + listener (phases 2-5)
* feat(beacon): wire RadioLibInterface hooks + admin validation (phases 6-7)
* fix(beacon): fix LocalModuleConfig flat access (no payload_variant), add localonly proto field
* feat(beacon): fix broadcaster inheritance, add preset/region validation + proto cache
- MeshBeaconBroadcastModule now inherits ProtobufModule<meshtastic_MeshBeacon>
(alongside private MeshBeaconModule + OSThread), giving it allocDataPacket()
and setStartDelay() without extra includes.
- Payload cache: rebuildCache() encodes the MeshBeacon protobuf once and stores
it in payloadCache[]/payloadCacheSize; sendBeacon() only calls rebuildCache()
when payloadCacheDirty==true. AdminModule calls invalidateCache() after saving
new config so the next broadcast picks up changes.
- Region/preset validation in handleSetModuleConfig (mesh_beacon_tag):
broadcast_on_preset is validated against the device's current region via
RadioInterface::validateConfigLora(); broadcast_offer_region is validated via
RadioInterface::validateConfigRegion(). Invalid values are zeroed with a
LOG_WARN before saving.
* feat(beacon): add unit tests for MeshBeaconModule and AdminModule configuration validation
* remove old meshtips
* more validation in NodeDB and AdminModule, and userprefs for baked in goodness
* copilot is my gravity
* mmmmm... beacon
* oops
* Enhance unit tests for MeshBeaconModule with detailed validation checks and output formatting
* new lines. Why not?
* finally
* legacy mode activate!
* Update protobufs (#17)
Co-authored-by: NomDeTom <116762865+NomDeTom@users.noreply.github.com>
* better logic, fixed a test
* updated for packet signing
fixed a test
added guards for licensed/ham mode
* channel numbers
* beacon: encrypt on the beacon channel PSK; fix split note
When broadcast_on_channel overrides the primary channel's name/PSK, the
beacon was encrypted with the PRIMARY PSK: perhapsEncode keys encryption
off the primary slot, but the radio-thread channel switch happens only
after encryption. sendBeaconPacket() now installs the beacon channel into
the primary slot for the synchronous duration of send() (cooperative
threading => no interleaving) so encryption/hash use the beacon channel,
then restores it. A shared beaconChannelSettings() helper builds the
channel for both the encrypt-time swap and the RF-time swap so the
key+hash cannot drift.
Also: correct the legacy-split comments (both packets go out on the same
beacon radio settings, not the normal config) and merge the two
consecutive `if (hasText)` blocks in the listener (cppcheck
duplicateCondition).
Tests: add channelPskOverride_swapsBeaconChannelAndRestores and
noChannelOverride_doesNotSwapPrimary; MockRouter snapshots the primary
channel at send() time.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* test/beacon: drain toPhoneQueue in tearDown to fix LSan leak abort
The listener delivers received text via MeshService::sendToPhone(), which
enqueues the packet into toPhoneQueue and takes ownership. Nothing dequeues
it in tests, so the three listener tests carrying message text stranded a
MeshPacket each — 1272 bytes / 3 allocations that LeakSanitizer flagged at
process exit, aborting the coverage run (surfaced by pio as [ERRORED] /
SIGHUP even though all 40 assertions passed).
Drain the phone queue in tearDown (getForPhone()/releaseToPool) so the
packets return to packetPool. Suite is now GREEN with no sanitizer abort.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* legacy hop override for zero-hoppers
* ever more beacons
* beacon: comment out broadcast_send_as_node pending further review
Functionality preserved in comments with full signing/has_bitfield notes
for when it is re-enabled. Proto tag 3 retained on the wire.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* test/beacon: fix fromIsCustomNodeWhenSet now that send-as-node is disabled
broadcast_send_as_node is commented out; from is always the local node.
Update the test assertion and doc comment to match current behaviour.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* Update protobufs (#21)
Co-authored-by: NomDeTom <116762865+NomDeTom@users.noreply.github.com>
* flags for beacons
* beacon: do more with less — slot-index targets + validation
Multi-target beacons embedded a full ChannelSettings in every BroadcastTarget,
blowing ModuleConfig past the 512-byte BLE FromRadio budget so the firmware would
not compile. Targets now reference an existing channel-table slot by channel_index
and the broadcaster resolves it via channels.getByIndex() at TX time. Net effect:
the same multi-target capability for a fraction of the bytes —
FromRadio 609 -> 510 B, MeshBeaconConfig 596 -> 324 B, AdminMessage 615 -> 511 B.
- proto: BroadcastTarget.channel (embedded) -> channel_index (uint32 ref); regen all
generated headers (size constants propagate to admin/localonly/deviceonly/mesh).
- broadcaster: resolve channel_index from the channel table; an out-of-range or blank
slot falls back to the default channel for the target preset rather than borrowing
the primary's name/PSK.
- AdminModule: validate broadcast_targets entries on write (region/preset sanitised
like the single-target fields; channel_index range-checked).
- userPrefs: TARGET_<n>_CHANNEL_{NAME,NUM,PSK} collapse to a single CHANNEL_INDEX.
- docs: two-step (set_channel -> set_module_config) multi-target setup, inline-vs-
reference distinction, and single-/multi-target are equal (not "legacy") options.
- tests: target validation + channel-index resolution incl. blank-slot fallback
(47/47 green on `./bin/run-tests.sh -e native -f test_mesh_beacon`).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NRAF5csgsMn6p1zEcFL8Qz
* throttling after reboot
* address copilot review
* simplify
* fix(beacon): use 0x%08x for node/packet IDs in logs; register test suite
The %#08lx log specifiers passed uint32_t (NodeNum/PacketId) to a %lx
length modifier — undefined behaviour on 64-bit (native test) targets and
non-standard width. Switch to the project-standard 0x%08x. Also bump
test/native-suite-count to 25 for the added test_mesh_beacon suite.
clod helped too
* copilot & clarity
clod helped too
* refactor(beacon): use auto for the sanitized config copy
clod helped too
* fix(beacon): guard empty-payload sends; gate has_mesh_beacon on build flag; document ISR_TX pre-switch
clod helped too
---------
Co-authored-by: Steve Gilberd <steve@erayd.net>
Co-authored-by: Darafei Praliaskouski <me@komzpa.net>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
||
|
|
d878c81ce8 |
Clamp position precision on public / known-keys (#10665)
* Clamp position precision on public / known-keys (Compliance) * Fix review comments: bounds check, all-channel precision clamp, disabled channel guard * Potential fix for pull request finding Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * Potential fix for pull request finding Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * Refactor position precision comments for clarity and update channel configuration handling in AdminModule * Potential fix for pull request finding Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> |
||
|
Ben Meadors
|
ed52e3019d | Change handleSetOwner parameter to const reference and improve long name handling | ||
|
Ben Meadors
|
c2bcec93d0 | Fix long name clamping and adjust related structures for compatibility | ||
|
Jason P
|
e028663658 |
BaseUI: First attempt at Ham Mode implementation (#10663)
* First attempt at Ham Mode implementation * Simplify licensedOnly check * Move related code closer together * TX Disabled if N0CALL, enabled if properly set * Only disable if callsign is N0CALL, don't enable at this stage. * Allow users back to Normal mode if they don't pick an ITU region |
||
|
TomandCopilot Autofix powered by AI
|
22d63fa69c |
Lora settings expansion and validation logic improvement (#9878)
* Enhance LoRa configuration with modem presets and validation logic * Rename bootstrapLoRaConfigFromPreset tests to validateModemConfig for clarity and consistency * additional tidy-ups to the validateModemConfig - still fundamentally broken at this point * Enhance region validation by adding numPresets to RegionInfo and implementing validateRegionConfig in RadioInterface * Add validation for modem configuration in applyModemConfig * Fix region unset handling and improve modem config validation in handleSetConfig * Refactor LoRa configuration validation methods and introduce clamping method for invalid settings * Update handleSetConfig to use fromOthers parameter to either correct or reject invalid settings * Fix some of the copilot review comments for LoRa configuration validation and clamping methods; add tests for region and preset handling * Redid the slot default checking and calculation. Should resolve the outstanding comments. * Add bandwidth calculation for LoRa modem preset fallback in clampConfigLora * Remove unused preset name variable in validateConfigLora and fix default frequency slot check in applyModemConfig * update tests for region handling * Got the synthetic colleague to add mock service for testing * Flash savings... hopefully * Refactor modem preset handling to use sentinel values and improve default preset retrieval * Refactor region handling to use profile structures for modem presets and channel calculations * added comments for clarity on parameters * Add shadow table tests and validateConfigLora enhancements for region presets * Add isFromUs tests for preset validation in AdminModule * Respond to copilot github review * address copilot comments * address null poointers * fix build errors * Fix the fix, undo the silly suggestions from synthetic reviewer. * we all float here * Fix include path for AdminModule in test_main.cpp * Potential fix for pull request finding Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * More suggestion fixes * admin module merge conflicts * admin module fixes from merge hell * fix: initialize default frequency slot and custom channel name; update LNA mode handling * save some bytes... * fix: simplify error logging for bandwidth checks in LoRa configuration * Update src/mesh/MeshRadio.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> |
||
|
Ben MeadorsandJake-B
|
64116cd0d3 |
Meshtastic OTA (moar) (#9327)
* Initial commit of combined BLE and WiFi OTA * Incorporate ota_hash in AdminMessage protobuf * OTA protobuf changes * Trunk fmt * Partition header check for OTA type * Guards * Guards * Derp * Missed one --------- Co-authored-by: Jake-B <jake-b@users.noreply.github.com> |
||
|
todd-herbert
|
ecfaf3a095 |
Canned Messages via InkHUD menu (#7096)
* Allow observers to respond to AdminMessage requests
Ground work for CannedMessage getters and setters
* Enable CannedMessage config in apps for InkHUD devices
* Migrate the InkHUD::Events AdminModule observer
Use the new AdminModule_ObserverData struct
* Bare-bones NicheGraphics util to access canned messages
Handles loading and parsing. Handle admin messages for setting and getting.
* Send canned messages via on-screen menu
* Change ThreadedMessageApplet from Observer to Module API
Allows us to intercept locally generated packets ('loopbackOK = true'), to handle outgoing canned messages.
* Fix: crash getting empty canned message string via Client API
* Move file into Utils subdir
* Move an include statement from .cpp to .h
* Limit strncpy size of dest, not source
Wasn't critical in ths specific case, but definitely a mistake.
|
||
|
|
4feaec651f |
Unify the native display config between legacy display and MUI (#6838)
* Add missed include * Another Warning fix * Add another HAS_SCREEN * Namespace fixes * Removed depricated destination types and re-factored destination screen * Get rid of Arduino Strings * Clean up after Copilot * SixthLine Def, Screen Rename Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment * Consistency is hard - fixed "Sixth" * System Frame Updates Adjusted line construction to ensure we fit maximum content per screen. * Fix up notifications * Add a couple more ifdef HAS_SCREEN lines * Add screen->isOverlayBannerShowing() * Don't forget the invert! * Adjust Nodelist Center Divider Adjust Nodelist Center Divider * Fix variable casting * Fix entryText variable as empty before update to fix validation * Altitude is int32_t * Update PowerTelemetry to have correct data type * Fix cppcheck warnings (#6945) * Fix cppcheck warnings * Adjust logic in Power.cpp for power sensor --------- Co-authored-by: Jason P <applewiz@mac.com> * More pixel wrangling so things line up NodeList edition * Adjust NodeList alignments and plumb some background padding for a possible title fix * Better alignment for banner notifications * Move title into drawCommonHeader; initial screen tested * Fonts make spacing items difficult * Improved beeping booping and other buzzer based feedback (#6947) * Improved beeping booping and other buzzer based feedback * audible button feedback (#6949) * Refactor --------- Co-authored-by: todd-herbert <herbert.todd@gmail.com> * Sandpapered the corners of the notification popup * Finalize drawCommonHeader migration * Update Title of Favorite Node Screens * Update node metric alignment on LoRa screen * Update the border for popups to separate it from background * Update PaxcounterModule.cpp with CommonHeader * Update WiFi screen with CommonHeader and related data reflow * It was not, in fact, pointing up * Fix build on wismeshtap * T-deck trackball debounce * Fix uptime on Device Focused page to actually detail * Update Sys screen for new uptime, add label to Freq/Chan on LoRa * Don't display DOP any longer, make Uptime consistent * Revert Uptime change on Favorites, Apply to Device Focused * Label the satelite number to avoid confusion * Boop boop boop boop * Correct GPS positioning and string consistency across strings for GPS * Fix GPS text alignment * Enable canned messages by default * Don't wake screen on new nodes * Cannedmessage list emote support added * Fn+e emote picker for freetext screen * Actually block CannedInput actions while display is shown * Add selection menu to bannerOverlay * Off by one * Move to unified text layouts and spacing * Still my Fav without an "e" * Fully remove EVENT_NODEDB_UPDATED * Simply LoRa screen * Make some char pointers const to fix compilation on native targets * Update drawCompassNorth to include radius * Fix warning * button thread cleanup * Pull OneButton handling from PowerFSM and add MUI switch (#6973) * Trunk * Onebutton Menu Support * Add temporary clock icon * Add gps location to fsi * Banner message state reset * Cast to char to satisfy compiler * Better fast handling of input during banner * Fix warning * Derp * oops * Update ref * Wire buzzer_mode * remove legacy string->print() * Only init screen if one found * Unsigned Char * More buttonThread cleaning * screen.cpp button handling cleanup * The Great Event Rename of 2025 * Fix the Radiomaster * Missed trackball type change * Remove unused function * Make ButtonThread an InputBroker * Coffee hadn't kicked in yet * Add clock icon for Navigation Bar * Restore clock screen definition code - whoops * ExternalNotifications now observe inputBroker * Clock rework (#6992) * Move Clock bits into ClockRenderer space * Rework clock into all device navigation * T-Watch Actually Builds Different * Compile fix --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * Add AM/PM to Digital Clock * Flip Seconds and AM/PM on Clock Display * Tik-tok pixels are hard * Fix builds on Thinknode M1 * Check for GPS and don't crash * Don't endif til the end * Rework the OneButton thread to be much less of a mess. (#6997) * Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily * Update src/input/ButtonThread.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * fix GPS toggle * Send the shutdown event, not just the kbchar * Honor the back button in a notificaiton popup * Draw the right size box for popup with options * Try to un-break all the things --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * 24-hour Clock Should have leading zero, but not 12-hour * Fixup some compile errors * Add intRoutine to ButtonThread init, to get more responsive user button back * Add Timezone picker * Fix Warning * Optionally set the initial selection for the chooser popup * Make back buttons work in canned messages * Drop the wrapper classes * LonPressTime now configurable * Clock Frame can not longer be blank; just add valid time * Back buttons everywhere! * Key Verification confirm banner * Make Elecrow M* top button a back button * Add settings saves * EInk responsiveness fixes * Linux Input Fixes * Add Native Trackball/Joystick support, and move UserButton to Input * No Flight Stick Mode * Send input event * Add Channel Utilization to Device Focused frame * Don't shift screens when we draw new ones * Add showOverlayBanner arguments to no-op * trunk * Default Native trackball to NC * Fix crash in simulator mode * Add longLong button press * Get the args right * Adjust Bluetooth Pairing Screen to account for bottom navigation. * Trackball everywhere, and unPhone buttons * Remap visionmaster secondary button to TB_UP * Kill ScanAndSelect * trunk * No longer need the canned messages input filter * All Canned All the time * Fix stm32 compile error regarding inputBroker * Unify tft lineheights (#7033) * Create variable line heights based upon SCREEN_HEIGHT * Refactor textPositions into method -> getTextPositions * Update SharedUIDisplay.h --------- Co-authored-by: Jason P <applewiz@mac.com> * Adjust top distance for larger displays * Adjust icon sizes for larger displays * Fix Paxcounter compile errors after code updates * Pixel wrangling to make larger screens fit better * Alert frame has precedence over banner -- for now * Unify on ALT_BUTTON * Align AM/PM to the digit, not the segment on larger displays * Move some global pin defines into configuration.h * Scaffolding for BMM150 9-axis gyro * Alt button behavior * Don't add the blank GPS frames without HAS_GPS * EVENT_NODEDB_UPDATED has been retired * Clean out LOG_WARN messages from debugging * Add dismiss message function * Minor buttonThread cleanup * Add BMM150 support * Clean up last warning from dev * Simplify bmm150 init return logic * Add option to reply to messages * Add minimal menu upon selecting home screen * Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp * Properly dismiss message * T-Deck Trackball press is not user button * Add select on favorite frame to launch cannedMessage DM * Minor wording change * Less capital letters * Fix empty message check, time isn't reliable * drop dead code * Make UIRenderer a static class instead of namespace * Fix the select on favorite * Check if message is empty early and then 'return' * Add kb_found, and show the option to launch freetype if appropriate * Ignore impossible touchscreen touches * Auto scroll fix * Move linebreak after "from" for banners to maximize screen usage. * Center "No messages to show" on Message frame * Start consolidating buzzer behavior * Fixed signed / unsigned warning * Cast second parameter of max() to make some targets happy * Cast kbchar to (char) to make arduino string happy * Shorten the notice of "No messages" * Add buzzer mode chooser * Add regionPicker to Lora icon * Reduce line spacing and reorder Position screen to resolve overlapping issues * Update message titles, fix GPS icons, add Back options * Leftover boops * Remove chirp * Make the region selection dismissable when a region is already set * Add read-aloud functionality on messages w/ esp8266sam * "Last Heard" is a better label * tweak the beep * 5 options * properly tear down freetext upon cancel * de-convelute canned messages just a bit * Correct height of Mail icon in navigation bar * Remove unused warning * Consolidate time methods into TimeFormatters * Oops * Change LoRa Picker Cancel to Back * Tweak selection characters on Banner * Message render not scrolling on 5th line * More fixes for message scrolling * Remove the safety next on text overflow - we found that root cause * Add pin definitions to fix compilation for obscure target * Don't let the touchscreen send unitialized kbchar values * Make virtual KB just a bit quicker * No more double tap, swipe! * Left is left, and Right is right * Update horizontal lightning bolt design * Move from solid to dashed separator for Message Frame * Single emote feature fix * Manually sort overlapping elements for now * Freetext and clearer choices * Fix ESP32 InkHUD builds on the unify-tft branch (#7087) * Remove BaseUI branding * Capitalization is fun * Revert Meshtastic Boot Frame Changes * Add ANZ_433 LoRa region to picker * Update settings.json --------- Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> |
||
|
+9
|
99d3e5eb70 |
2.6 changes (#5806)
* 2.6 protos
* [create-pull-request] automated change (#5789)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Hello world support for UDP broadcasts over the LAN on ESP32 (#5779)
* UDP local area network meshing on ESP32
* Logs
* Comment
* Update UdpMulticastThread.h
* Changes
* Only use router->send
* Make NodeDatabase (and file) independent of DeviceState (#5813)
* Make NodeDatabase (and file) independent of DeviceState
* 70
* Remove logging statement no longer needed
* Explicitly set CAD symbols, improve slot time calculation and adjust CW size accordingly (#5772)
* File system persistence fixes
* [create-pull-request] automated change (#6000)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Update ref
* Back to 80
* [create-pull-request] automated change (#6002)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* 2.6 <- Next hop router (#6005)
* Initial version of NextHopRouter
* Set original hop limit in header flags
* Short-circuit to FloodingRouter for broadcasts
* If packet traveled 1 hop, set `relay_node` as `next_hop` for the original transmitter
* Set last byte to 0xFF if it ended at 0x00
As per an idea of @S5NC
* Also update next-hop based on received DM for us
* temp
* Add 1 retransmission for intermediate hops when using NextHopRouter
* Add next_hop and relayed_by in PacketHistory for setting next-hop and handle flooding fallback
* Update protos, store multiple relayers
* Remove next-hop update logic from NeighborInfoModule
* Fix retransmissions
* Improve ACKs for repeated packets and responses
* Stop retransmission even if there's not relay node
* Revert perhapsRebroadcast()
* Remove relayer if we cancel a transmission
* Better checking for fallback to flooding
* Fix newlines in traceroute print logs
* Stop retransmission for original packet
* Use relayID
* Also when want_ack is set, we should try to retransmit
* Fix cppcheck error
* Fix 'router' not in scope error
* Fix another cppcheck error
* Check for hop_limit and also update next hop when `hop_start == hop_limit` on ACK
Also check for broadcast in `getNextHop()`
* Formatting and correct NUM_RETRANSMISSIONS
* Update protos
* Start retransmissions in NextHopRouter if ReliableRouter didn't do it
* Handle repeated/fallback to flooding packets properly
First check if it's not still in the TxQueue
* Guard against clients setting `next_hop`/`relay_node`
* Don't cancel relay if we were the assigned next-hop
* Replies (e.g. tapback emoji) are also a valid confirmation of receipt
---------
Co-authored-by: GUVWAF <thijs@havinga.eu>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
* fix "native" compiler errors/warnings NodeDB.h
* fancy T-Deck / SenseCAP Indicator / unPhone / PICOmputer-S3 TFT screen (#3259)
* lib update: light theme
* fix merge issue
* lib update: home buttons + button try-fix
* lib update: icon color fix
* lib update: fix instability/crash on notification
* update lib: timezone
* timezone label
* lib update: fix set owner
* fix spiLock in RadioLibInterface
* add picomputer tft build
* picomputer build
* fix compiler error std::find()
* fix merge
* lib update: theme runtime config
* lib update: packet logger + T-Deck Plus
* lib update: mesh detector
* lib update: fix brightness & trackball crash
* try-fix less paranoia
* sensecap indicator updates
* lib update: indicator fix
* lib update: statistic & some fixes
* lib-update: other T-Deck touch driver
* use custom touch driver for Indicator
* lower tft task prio
* prepare LVGL ST7789 driver
* lib update: try-fix audio
* Drop received packets from self
* Additional decoded packet ignores
* Honor flip & color for Heltec T114 and T190 (#4786)
* Honor TFT_MESH color if defined for Heltec T114 or T190
* Temporary: point lib_deps at fork of Heltec's ST7789 library
For demo only, until ST7789 is merged
* Update lib_deps; tidy preprocessor logic
* Download debian files after firmware zip
* set title for protobufs bump PR (#4792)
* set title for version bump PR (#4791)
* Enable Dependabot
* chore: trunk fmt
* fix dependabot syntax (#4795)
* fix dependabot syntax
* Update dependabot.yml
* Update dependabot.yml
* Bump peter-evans/create-pull-request from 6 to 7 in /.github/workflows (#4797)
* Bump docker/build-push-action from 5 to 6 in /.github/workflows (#4800)
* Actions: Semgrep Images have moved from returntocorp to semgrep (#4774)
https://hub.docker.com/r/returntocorp/semgrep notes: "We've moved!
Official Docker images for Semgrep now available at semgrep/semgrep."
Patch updates our CI workflow for these images.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Bump meshtestic from `31ee3d9` to `37245b3` (#4799)
Bumps [meshtestic](https://github.com/meshtastic/meshTestic) from `31ee3d9` to `37245b3`.
- [Commits](https://github.com/meshtastic/meshTestic/compare/31ee3d90c8bef61e835c3271be2c7cda8c4a5cc2...37245b3d612a9272f546bbb092837bafdad46bc2)
---
updated-dependencies:
- dependency-name: meshtestic
dependency-type: direct:production
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* [create-pull-request] automated change (#4789)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Bump pnpm/action-setup from 2 to 4 in /.github/workflows (#4798)
Bumps [pnpm/action-setup](https://github.com/pnpm/action-setup) from 2 to 4.
- [Release notes](https://github.com/pnpm/action-setup/releases)
- [Commits](https://github.com/pnpm/action-setup/compare/v2...v4)
---
updated-dependencies:
- dependency-name: pnpm/action-setup
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* Raspberry Pico2 - needs protos
* Re-order doDeepSleep (#4802)
Make sure PMU sleep takes place before I2C ends
* [create-pull-request] automated change
* heltec-wireless-bridge
requires Proto PR first
* feat: trigger class update when protobufs are changed
* meshtastic/ is a test suite; protobufs/ contains protobufs;
* Update platform-native to pick up portduino crash fix (#4807)
* Hopefully extract and commit to meshtastic.github.io
* CI fixes
* [Board] DIY "t-energy-s3_e22" (#4782)
* New variant "t-energy-s3_e22"
- Lilygo T-Energy-S3
- NanoVHF "Mesh-v1.06-TTGO-T18" board
- Ebyte E22 Series
* add board_level = extra
* Update variant.h
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* Consolidate variant build steps (#4806)
* poc: consolidate variant build steps
* use build-variant action
* only checkout once and clean up after run
* Revert "Consolidate variant build steps (#4806)" (#4816)
This reverts commit
|
||
|
Eric SeveranceandBen Meadors
|
7648391f91 |
Reject invalid configuration for the default MQTT server (#6066)
* Sanity check configuration for the default MQTT server * Skip for MESHTASTIC_EXCLUDE_MQTT --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Tom Fifieldandmverch67
|
cd198fcf3f |
cherry-pick: device-ui persistency (#5570)
* device-ui persistency * review update --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> |
||
|
AustinandBen Meadors
|
9415254dda |
musl compatibility (#5219)
* musl compat * trunk fmt * Update platform-native, including musl fix https://github.com/meshtastic/platform-native/pull/5 --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Ben Meadors
|
fb9f361052 |
Implement rebroadcast mode NONE (#5040)
* Implement rebroadcast mode none * Correct debug message |
||
|
Thomas Göttgens
|
12481b568a |
fix a lot of nuisances reported by cppcheck (#4872)
* fix a lot of nuisances reported by cppcheck * fix portduino |
||
|
Ben MeadorsandJonathan Bennett
|
9ac0e26d42 |
Add option to preserve private key for factory reset (config) (#4679)
* Add option to preserve private key for factory reset (config) * Typo fix * Copy the key in the right direction, and set the size. * Don't set the key size back to 0 right after setting it to 32. * Set the key size before using it to do a memcpy. * Use the right key_size for backing up private_key * Don't factoryReset() for a missing nodeDB * Disable Bluetooth in AdminModule when resetting device settings or nodeDB to avoid race * Add checks for valid objects before deinit bluetooth * Add disableBluetooth to handleSetConfig, handleSetModuleConfig, and commit settings --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> |
||
|
Jonathan Bennett
|
f86dde3c40 |
AdminModule session_passkey (#4478)
* Protobuf * Adds session_passkey for remote admin changes |
||
|
|
eabec5ae34 |
Show specific frame when updating screen (#4264)
* Updated setFrames in Screen.cpp Added code to attempt to revert back to the same frame that user was on prior to setFrame reload. * Space added Screen.cpp * Update Screen.cpp Make screen to revert to Frame 0 if the originally displayed frame is no longer there. * Update Screen.cpp Inserted boolean holdPosition into setFrames to indicate the requirement to stay on the same frame ( if =true) or else it will switch to new frame . Only Screen::handleStatusUpdate calls with setFrame(true). ( For Node Updates) All other types of updates call as before setFrame(), so it will change focus as needed. * Hold position, even if number of frames increases * Hold position, if handling an outgoing text message * Update Screen.cpp * Reverted chnages related to devicestate.has_rx_text_message * Reset to master * CannedMessages only handles routing packets when waiting for ACK Previously, this was calling Screen::setFrames at unexpected times * Gather position info about screen frames while regenerating * Make admin module observable Notify only when relevant. Currently: only to handle remove_nodenum. * Optionally specify which frame to focus when setFrames runs * UIFrameEvent uses enum instead of multiple booleans * Allow modules to request their own frame to be focussed This is done internally by calling MeshModule::requestFocus() Easier this way, insteady of passing the info in the UIFrameEvent: * Modules don't always know whether they should be focussed until after the UIFrameEvent has been raised, in dramFrame * Don't have to pass reference to module instance as parameter though several methods * E-Ink screensaver uses FOCUS_PRESERVE Previously, it had its own basic implementation of this. * Spelling: regional variant * trunk * Fix HAS_SCREEN guarding * More HAS_SCREEN guarding --------- Co-authored-by: BIST <77391720+slash-bit@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: slash-bit <v-b2@live.com> |
||
|
geeksvilleandJonathan Bennett
|
8785adf6e4 |
minor cleanup proposal (#4169)
* MESHTASTIC_EXCLUDE_WIFI and HAS_WIFI cleanup... Our code was checking HAS_WIFI and the new MESHTASTIC_EXCLUDE_WIFI flags in various places (even though EXCLUDE_WIFI forces HAS_WIFI to 0). Instead just check HAS_WIFI, only use EXCLUDE_WIFI inside configuration.h * cleanup: use HAS_NETWORKING instead of HAS_WIFI || HAS_ETHERNET We already had HAS_NETWORKING as flag in MQTT to mean 'we have tcpip'. Generallize that and move it into configuration.h so that we can use it elsewhere. * Use #pragma once, because supported by gcc and all modern compilers instead of #ifdef DOTHFILE_H etc... --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> |
||
|
Jim WhitelawandBen Meadors
|
acc32916c3 |
Add multiple configuration options for a minimized build (GPS,WiFi,BT,MQTT,Screen). (#3469)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
GUVWAF
|
6ff61b3e04 |
Pico W: Initial Wi-Fi support (#2980)
* Pico W: Initial WiFi support: connects, but freezes after a while * Update arduino-pico core to fix hang with Wi-Fi * Add `picow` to workflow since it's different from `pico` now |
||
|
Ben Meadors
|
1b68408f2f |
Remote hardware overhaul (#2495)
* Update protos * WIP * Param * Has remote hardware * Protos * Initializer * Added new admin message for node remote hardware pins * Badunkatrunk * Init and memcpy |
||
|
Ben Meadors
|
b70af5cc78 | Set ham mode admin message | ||
|
Ben Meadors
|
d9031610ab | Connection status admin message | ||
|
Ben Meadors
|
e8e04d23d7 | WIP | ||
|
Thomas Göttgens
|
6fdb93cd16 |
re-add namespacing in protobufs. Let's see what i missed. Portduino likely ...
Checking in generated on purpose. |
||
|
GUVWAF
|
8815746006 | Fix wrong comment | ||
|
Ben Meadors
|
b1ba807ec9 | Only save and reboot while a transaction isnt open | ||
|
Ben Meadors
|
056a93f0c9 | Consolidate reboots (#1827) | ||
|
Ben Meadors
|
572f9f9295 |
Get device metadata admin message (#1607)
* Get device metadata admin message * Bump device state version |
||
|
Sacha Weatherstone
|
6b0ce6b729 | Finish config transition | ||
|
Sacha Weatherstone
|
8ba0a9bf87 | Fix config switch | ||
|
Sacha Weatherstone
|
f84286d138 | Split config structure in two | ||
|
Sacha Weatherstone
|
7ae8601ba5 | fix warnings | ||
|
Sacha Weatherstone
|
8f038ced15 | add handleSetConfig, remove team | ||
|
Sacha Weatherstone
|
98cd19ea0f | Config rework - Init getConfig | ||
|
Sacha Weatherstone
|
f33cd4081e | Implement getOwner | ||
|
Sacha Weatherstone
|
6bee95d6b2 | Rename MeshPlugin, SinglePortPlugin and ProtobufPlugin | ||
|
Jm Casler
|
e53abbfb2b | more rename plugin to module | ||
|
Jm Casler
|
86e767eec2 | Update filenames from plugins to modules |