Fixes cppcheck issues
src/motion/QMA6100PSensor.cpp:173: [medium:warning] Member variable 'QMA6100P::rawAccelData' is not initialized in the constructor. Maybe it should be initialized directly in the class QMA6100P? [uninitDerivedMemberVar]
src/motion/QMA6100PSensor.cpp:173: [medium:warning] Member variable 'QMA6100P::_i2cPort' is not initialized in the constructor. Maybe it should be initialized directly in the class QMA6100P? [uninitDerivedMemberVar]
src/motion/QMA6100PSensor.cpp:173: [medium:warning] Member variable 'QMA6100P::_deviceAddress' is not initialized in the constructor. Maybe it should be initialized directly in the class QMA6100P? [uninitDerivedMemberVar]
* indicator: RP2040 peripherals for the main firmware
The SenseCAP Indicator RP2040 co-processor serves as a generic
peripheral bridge over a serial protobuf link (interdevice.proto):
- FakeI2C implements TwoWire and tunnels write and read transactions,
so the standard sensor drivers and the I2C scan work unmodified on
the bridged second bus (WIRE1)
- FakeUART forwards GPS NMEA to the regular GPS driver
- SD card access with chunked file transfers, paged directory
listings and card statistics; device-ui loads map tiles and map
styles from the card behind the RP2040
- link at 2M baud with 4KB chunks, message structs kept off task
stacks
Log messages carrying their own bracket tag render it like a thread
name. Replaces the earlier IndicatorSensor/COBS approach.
* indicator: address review
Correlate responses with request ids, serialize the shared TX buffer,
reject oversized frames, fix RX buffer overflow and NMEA truncation,
full-length file paths.
* indicator: assign the GPS FakeUART at runtime
Static initialization order across translation units is undefined,
so createGps() assigns and null-checks the bridged serial instead.
Bound the NMEA length defensively.
* indicator: bump device-ui pin to 27e6c0c
* indicator: ping/pong link probe, non-blocking runOnce, FakeI2C locking
The RP2040 sends nothing unsolicited without a GPS module attached, so
wait_ready now probes with the new ping message instead of listening
passively. runOnce skips its pump while a requester holds link_lock,
keeping the main loop from blocking for a full request timeout. FakeI2C
serializes transactions between the UI task and the main loop with an
owner-tracked lock held from beginTransmission to transaction end.
* indicator: link resync, config-honoring GPS, bridged-bus routing, stats validity
Frame resync scans to the next magic instead of flushing the RX buffer,
and the pump handles all buffered frames per pass. The RX drain reads in
bulk and the protobuf encoder gets the correct buffer bound. GPS honors
the gps_mode setting on the Indicator instead of always running. RTC,
I2C keyboard and motion sensor drivers resolve WIRE1 through
ScanI2CTwoWire::fetchI2CBus so bridged buses reach the right transport.
FakeUART implements flush/availableForWrite/const-write from the Stream
contract and fences its cross-core ring buffer. SdCardInfo.stats_valid
is passed through to device-ui, and the remote FS backend gains the
remove operation used for cleanup of failed tile saves.
* indicator: retry lost link round trips, I2CResult UNSPECIFIED
Remote FS operations retry once on a transport timeout. Correlation ids
drop late responses of the first attempt; a retried append whose first
attempt landed is recognized by the offset conflict carrying the
resulting file size. Definitive failures are not retried, missing-tile
probes stay a single round trip. Regenerated bindings add the
I2CResult.Status UNSPECIFIED zero value so an empty result cannot
decode as success.
* indicator: nack responses, rename bridge classes to I2CProxy/UARTProxy
A request the co-processor cannot decode or handle is nacked, so the
requester fails fast instead of burning its timeout. All requests stage
the shared tx_message under link_lock. FakeI2C and FakeUART are renamed
to I2CProxy and UARTProxy after the pattern they implement, with their
instances following suit. Drops dead code (unused NO_NEWS_PAUSE,
unreachable not-running branches, doubled include guards) and the GPS
pin log line that is meaningless on the tunneled port.
* indicator: refuse a co-processor that speaks another protocol version
The ping/pong handshake now carries InterdeviceVersion. A pong reporting
a version other than ours means the RP2040 runs firmware that does not
match this build, so the bridge stays shut down for the session and the
mismatch is logged with both versions. Requests fail fast instead of
being misinterpreted by the other side.
* indicator: regen protos, interdevice protocol version 2
* indicator: per-task I2C contexts, gated handshake, retryable link failures
The bridged I2C bus is shared between the main loop and the UI task, and
TwoWire has no transaction bracket a lock can span: drivers drain the read
buffer with available()/read() long after requestFrom() returned. Each
calling task therefore gets its own staging and read buffers instead of a
lock that could be left held (or that could not protect the read buffer
anyway). The transaction is staged inside the link, under its lock.
No request is sent before the co-processor has completed the version
handshake, and runOnce keeps probing until it does, so a co-processor that
boots slowly or reboots on its watchdog no longer leaves the bridge dead
for the session. Requests in flight are counted, not flagged: two threads
can be in a request and the first one out must not clear the other's state.
File operations are retried on a lost frame and on a co-processor busy with
card maintenance, but not on a refusal (nack) or a definitive failure, and
they release the SPI lock while they wait so a slow link does not starve
the radio.
* indicator: fail safe on a peer mismatch, wait out card maintenance
FileStatus moved to a fresh tag: reusing the tag of the removed success flag
made every failure status decode as success on a peer that predates it.
A card being mounted (busy) is retried rather than reported as an empty
slot, and a co-processor busy with card maintenance is waited out: mounting
takes seconds and the free space scan of a large card walks its whole FAT,
which is not a reason to report a missing tile. The bridged I2C bus releases
the SPI lock as well, so the keyboard scan on the UI task cannot starve the
radio either. Slot claims in the I2C proxy are atomic, NMEA is not sent to a
peer we refuse to talk to, and the handshake is completed by the unsolicited
ping the co-processor sends when it has booted, which also reports a
reboot.
* indicator: regen protos, FileStatus back on the original tags
* indicator: regen protos, ping/pong carry the InterdeviceVersion enum
* indicator: point the protobufs submodule at the merged interdevice protos
* indicator: pin device-ui to the branch with the remote SD support
* indicator: honor the txOnly flag of flush, report dropped GPS writes
flush() through a Stream pointer discarded the receive buffer: the flag is
txOnly, and HardwareSerial::flush() keeps what has been received. write()
reported bytes as written even when the link refused to send them. The link
probe uses Throttle for its rate limit.
* indicator: decide the log tag on the formatted message, hex request ids
The thread tag was suppressed based on the printf template, which disagrees
with the rendered message it is compared against: a format starting with a
conversion could produce two tags, and one without a trailing bracket-space
lost the tag entirely. vprintf now receives the thread name and picks. Also
shifts only the bytes actually buffered after a frame, throttles with
Throttle and logs request ids as hex.
* indicator: SD mount, eject and format commands over the link
* indicator: bound how long a busy card state blocks the UI task
* indicator: a busy co-processor must not block the UI task for ever
The busy retry re-armed its own budget on every busy answer, so a
co-processor that stayed busy kept the caller in the loop with no way out.
Transport retries and the wait for a busy card are now separate budgets that
only count down.
* indicator: start each request from an aligned receive buffer
A byte run lost mid-response (a UART overflow during a 4KB tile chunk, when
the display starves the RX interrupt) misaligns the assembly buffer. The
buffer was never reset, so the poison outlived the request and cascaded into
the following chunks of the same tile: one glitch dropped a whole multi-chunk
tile, while single-chunk tiles resynced in the idle gap and survived. Each
request now flushes the buffer first, bounding a glitch to the one chunk it
hit. Adds resync/decode/timeout counters, logged rarely, to see the rate.
* indicator: enlarge the LVGL heap for low-zoom map tiles
The heap was 3MB and the image cache reserves 1.5MB of it, so a low-zoom map
tile could not find a large enough contiguous block to decode and rendered
white. 5MB of the 8MB PSRAM fixes it with room to spare.
* indicator: advance the device-ui and protobufs pins to the merged commits
Point the protobufs submodule at the merged SD command protos (protobufs
#986) so it matches the checked in interdevice sources, and bump the
device-ui archive to the current indicator branch tip that carries the SD
button and format UI.
* Update device-ui library dependency URL
* remove cutom sdkconfig
* remove duplicated synchronisation (after PR11278 is in place)
* set commit reference to updated RemoteSDService class
* Add board_level configuration for release
* fix cppcheck errors
---------
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
Co-authored-by: CodeRabbit <noreply@coderabbit.ai>
Co-authored-by: mverch67 <manuel.verch@gmx.de>
* Add Elecrow ThinkNode M8 variant scaffold (thinknode_m8)
nRF52840 + SX1262 + 2.4" e-paper + ATGM336H-5NR32 GPS.
All pins resolved from ThinkNode_M8_V0.3.sch; cross-checked
against meshtastic/firmware#9181 (Elecrow V0.1 reference).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* Add Elecrow ThinkNode M8 board support (nRF52840/SX1262, 1.54in e-ink, ATGM336H GNSS, SC7A20, EC04 encoder)
* Address review: keep the stored backlight level out of blanking, match only the SC7A20 WHO_AM_I byte, and transfer detents atomically
* Use std::atomic for the press-and-turn detent counter so native builds compile
* Drop the ThinkNode M8 LED_BUILTIN redefinition that warned on every translation unit
---------
Co-authored-by: claude[bot] <41898282+claude[bot]@users.noreply.github.com>
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Removed:
- MessageStore::addFromPacket and addFromString, superseded by
tryAddFromPacket
- GeoCoord rangeRadiansToMeters, distanceTo, bearingTo
- Router::rawSend, declared virtual with no override and no caller
- ContentHandler handleHotspot, handleFs, handleAdminSettings,
handleAdminSettingsApply, handleDeleteFsContent and their commented
route registrations, plus the now unreachable htmlDeleteDir and the
handleUpdateFs declaration that had no definition
- ContentHelper replaceAll
- OnScreenKeyboardModule popup chain: showPopup, clearPopup, drawPopup,
drawPopupOverlay and their state, unreachable since the frame based UI
was replaced by baseUI
- DebugRenderer drawDebugInfoTrampoline, drawDebugInfoSettingsTrampoline
and the orphaned drawFrameSettings
- NodeListRenderer calculateMaxScroll, drawColumns and a stale extern
haveGlyphs declaration with no definition
- UIRenderer::haveGlyphs, Screen::blink,
NotificationRenderer::showKeyboardMessagePopupWithTitle,
VirtualKeyboard::getInputText
- InkHUD touchNavLeft, touchNavRight, Applet::getActiveNodeCount,
ThreadedMessageApplet::saveMessagesToFlash
- TwoButton::setHandlerUp, TwoButtonExtended setHandlerUp,
setJoystickDownHandlers, setJoystickUpHandlers
- CannedMessageModule LaunchRepeatDestination, isCharInputAllowed,
hasMessages
- TrafficManagementModule resetStats, recordRouterHopPreserved,
saturatingIncrement
- UnitConversions::MetersPerSecondToMilesPerHour
- EncryptedStorage getSessionRemainingSeconds
- BMI270Sensor::writeRegisters, GPS::hasFlow, FSCommon copyFile,
SerialConsole consolePrintf, buzz playLongPressLeadUp,
memGet displayPercentHeapFree
* Stop accelerometer thread when double-tap/wake-on-motion disabled at runtime
double_tap_as_button_press and wake_on_tap_or_motion are applied live: the
OFF->ON edge calls accelerometerThread->start(), but there was no ON->OFF
branch, so turning either flag off left the sensor thread running (polling
I2C, drawing power) until reboot. Worse, because enabled stayed true, a later
OFF->ON edge was a no-op (the enabled==false guard blocked re-start), leaving
the feature un-restartable without a reboot.
Add the symmetric ON->OFF branch in both handlers. When a flag goes true->off
and the other consumer of the shared thread is also off, call
accelerometerThread->disable() (stops runOnce polling and clears enabled so a
later re-enable can start() again). Each branch checks the other flag first so
disabling one feature never stops the sensor while the other still needs it.
* Keep accelerometer thread running when its sensor drives the compass
* Guard accelerometer thread config toggles against a null thread pointer
* AdminModule: factor shared accelerometer start/stop into a helper
The device and display config handlers had mirror-image blocks reconciling the
shared accelerometer thread. Extract reconcileAccelerometerThread(wasOn, nowOn,
otherFeatureOn) so the null guard, edge logic, compass (providesHeading) guard,
and rationale live in one place; each call site is now a single call. Behavior
is unchanged. Also drops the redundant per-field assignment that the
whole-struct `config.device = ...` / `config.display = ...` overwrites anyway.
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Every other .cpp/.h pair in src/ (350 of 351) uses identical
capitalization between the two files. Power.cpp/power.h was the sole
outlier; this aligns it with the rest of the codebase. No functional
change — all includes already resolved this file the same way on
case-sensitive filesystems.
Assisted-by: Claude Sonnet 5 <noreply@anthropic.com>
Signed-off-by: Andrew Yong <me@ndoo.sg>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix T1000-E QMA6100P I2C probing
* Refactored to make generic
* address copilot comments
* fix(i2c): address copilot comments on QMA6100P scanning and hardware init
- ScanI2CTwoWire: gate bounded QMA6100P probing to addresses 0x12/0x13 only
(Copilot comment: avoid blocking other I2C device detection on nRF52)
Falls back to normal Wire probing for all other addresses, allowing BMM150
and other devices at overlapping addresses to be properly detected.
- Nrf52Twim: suppress cppcheck redundantAssignment on ENABLE register write
(intentional disable→configure→enable pattern for hardware safety; explicit
disable ensures known state before configuration even if already disabled)
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
* Nrf52Twim: gate on HAS_QMA6100P; suppress cppcheck redundantAssignment
The TWIM helper is only used by the QMA6100P probing path (T1000-E, the sole
board defining HAS_QMA6100P). It was gated only on ARCH_NRF52, so it compiled
as dead code on every other nRF52 board and was analyzed by the rak4631
cppcheck job -- which failed on a redundantAssignment false positive.
Gate the header and source on HAS_QMA6100P so the file is only built/analyzed
where it is actually used. Also keep an inline suppression on the ENABLE
re-assignment (a required volatile disable->reconfigure->enable sequence) for
the case where the T1000-E build is run through cppcheck locally.
Fixes the rak4631 cppcheck CI failure for PR #10713.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: nomdetom <nomdetom@protonmail.com>
Co-authored-by: Tom <116762865+NomDeTom@users.noreply.github.com>
Co-authored-by: Claude Haiku 4.5 <noreply@anthropic.com>
* Fixes
* Remove BATTERY_LPCOMP_THRESHOLD
BATTERY_LPCOMP_THRESHOLD is dead code — in main-nrf52.cpp it's inside #ifdef BATTERY_LPCOMP_INPUT, which this board intentionally doesn't define. The threshold value is never reached.
* Trunk fix
* Update MotionSensor.cpp
* fix
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* True Colors on TFT (Heltec Mesh Node T114, Heltec Vision Master T190, CardPuter Adv, T-Deck, T-Lora Pager)
* Theme support - New and some Classic Themes!
* Colored Compass
---------
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Infinite calibration loop fix
* Save calibration
* Screen refresh
* reduce repeated code
* reduce repeated code to reduce flash
* fix Waypoint compass size and no fix no heading labels
* Don't show compass unless we have a heading and location
* If no calculated heading from moving, we should have no heading
* Slow walking calculated heading and auto stale heading when not moving
* Triming flash space
* cleanup
* show "?" when no location or heading for distance and heading screen
* cleanup
* Stale heading logic
* final trim
* Compass Calibration screen redesign
* Trunk Fix
* Compile fix
* patch
* Update src/motion/MotionSensor.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update WaypointModule.cpp
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Cardputer Kit
BMI270 WIP
* BMI270 support
* verify that the number of bytes read matches the requested length
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* trunk'd
* remove excessive logging
* Kick the screen when unsleeping
* Update the st7789 library, and enable displayon and displayoff
* Battery detection
* Default to arrow keys and enter, while in menus.
* Enable Backlight control
* Update src/detect/ScanI2CTwoWire.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* updateState method now accepts shouldRequestFocus parameter for better maintainability
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
I thought git would be smart enough to understand all the whitespace changes but even with all the flags I know to make it ignore theses it still blows up if there are identical changes on both sides.
I have a solution but it require creating a new commit at the merge base for each conflicting PR and merging it into develop.
I don't think blowing up all PRs is worth for now, maybe if we can coordinate this for V3 let's say.
This reverts commit 0d11331d18.
* Update calibration logic for ICM20948 sensor
Initialize highest and lowest magnetic values based on sensor data readiness during calibration.
* Refactor BMX160 calibration to use magnetometer data
Update calibration logic to initialize highest and lowest values using magnetometer data.
* Add missed viable defines in ::calibrate()
* Add missed include
* Another Warning fix
* Add another HAS_SCREEN
* Namespace fixes
* Removed depricated destination types and re-factored destination screen
* Get rid of Arduino Strings
* Clean up after Copilot
* SixthLine Def, Screen Rename
Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment
* Consistency is hard - fixed "Sixth"
* System Frame Updates
Adjusted line construction to ensure we fit maximum content per screen.
* Fix up notifications
* Add a couple more ifdef HAS_SCREEN lines
* Add screen->isOverlayBannerShowing()
* Don't forget the invert!
* Adjust Nodelist Center Divider
Adjust Nodelist Center Divider
* Fix variable casting
* Fix entryText variable as empty before update to fix validation
* Altitude is int32_t
* Update PowerTelemetry to have correct data type
* Fix cppcheck warnings (#6945)
* Fix cppcheck warnings
* Adjust logic in Power.cpp for power sensor
---------
Co-authored-by: Jason P <applewiz@mac.com>
* More pixel wrangling so things line up NodeList edition
* Adjust NodeList alignments and plumb some background padding for a possible title fix
* Better alignment for banner notifications
* Move title into drawCommonHeader; initial screen tested
* Fonts make spacing items difficult
* Improved beeping booping and other buzzer based feedback (#6947)
* Improved beeping booping and other buzzer based feedback
* audible button feedback (#6949)
* Refactor
---------
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
* Sandpapered the corners of the notification popup
* Finalize drawCommonHeader migration
* Update Title of Favorite Node Screens
* Update node metric alignment on LoRa screen
* Update the border for popups to separate it from background
* Update PaxcounterModule.cpp with CommonHeader
* Update WiFi screen with CommonHeader and related data reflow
* It was not, in fact, pointing up
* Fix build on wismeshtap
* T-deck trackball debounce
* Fix uptime on Device Focused page to actually detail
* Update Sys screen for new uptime, add label to Freq/Chan on LoRa
* Don't display DOP any longer, make Uptime consistent
* Revert Uptime change on Favorites, Apply to Device Focused
* Label the satelite number to avoid confusion
* Boop boop boop boop
* Correct GPS positioning and string consistency across strings for GPS
* Fix GPS text alignment
* Enable canned messages by default
* Don't wake screen on new nodes
* Cannedmessage list emote support added
* Fn+e emote picker for freetext screen
* Actually block CannedInput actions while display is shown
* Add selection menu to bannerOverlay
* Off by one
* Move to unified text layouts and spacing
* Still my Fav without an "e"
* Fully remove EVENT_NODEDB_UPDATED
* Simply LoRa screen
* Make some char pointers const to fix compilation on native targets
* Update drawCompassNorth to include radius
* Fix warning
* button thread cleanup
* Pull OneButton handling from PowerFSM and add MUI switch (#6973)
* Trunk
* Onebutton Menu Support
* Add temporary clock icon
* Add gps location to fsi
* Banner message state reset
* Cast to char to satisfy compiler
* Better fast handling of input during banner
* Fix warning
* Derp
* oops
* Update ref
* Wire buzzer_mode
* remove legacy string->print()
* Only init screen if one found
* Unsigned Char
* More buttonThread cleaning
* screen.cpp button handling cleanup
* The Great Event Rename of 2025
* Fix the Radiomaster
* Missed trackball type change
* Remove unused function
* Make ButtonThread an InputBroker
* Coffee hadn't kicked in yet
* Add clock icon for Navigation Bar
* Restore clock screen definition code - whoops
* ExternalNotifications now observe inputBroker
* Clock rework (#6992)
* Move Clock bits into ClockRenderer space
* Rework clock into all device navigation
* T-Watch Actually Builds Different
* Compile fix
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Add AM/PM to Digital Clock
* Flip Seconds and AM/PM on Clock Display
* Tik-tok pixels are hard
* Fix builds on Thinknode M1
* Check for GPS and don't crash
* Don't endif til the end
* Rework the OneButton thread to be much less of a mess. (#6997)
* Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily
* Update src/input/ButtonThread.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* fix GPS toggle
* Send the shutdown event, not just the kbchar
* Honor the back button in a notificaiton popup
* Draw the right size box for popup with options
* Try to un-break all the things
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* 24-hour Clock Should have leading zero, but not 12-hour
* Fixup some compile errors
* Add intRoutine to ButtonThread init, to get more responsive user button back
* Add Timezone picker
* Fix Warning
* Optionally set the initial selection for the chooser popup
* Make back buttons work in canned messages
* Drop the wrapper classes
* LonPressTime now configurable
* Clock Frame can not longer be blank; just add valid time
* Back buttons everywhere!
* Key Verification confirm banner
* Make Elecrow M* top button a back button
* Add settings saves
* EInk responsiveness fixes
* Linux Input Fixes
* Add Native Trackball/Joystick support, and move UserButton to Input
* No Flight Stick Mode
* Send input event
* Add Channel Utilization to Device Focused frame
* Don't shift screens when we draw new ones
* Add showOverlayBanner arguments to no-op
* trunk
* Default Native trackball to NC
* Fix crash in simulator mode
* Add longLong button press
* Get the args right
* Adjust Bluetooth Pairing Screen to account for bottom navigation.
* Trackball everywhere, and unPhone buttons
* Remap visionmaster secondary button to TB_UP
* Kill ScanAndSelect
* trunk
* No longer need the canned messages input filter
* All Canned All the time
* Fix stm32 compile error regarding inputBroker
* Unify tft lineheights (#7033)
* Create variable line heights based upon SCREEN_HEIGHT
* Refactor textPositions into method -> getTextPositions
* Update SharedUIDisplay.h
---------
Co-authored-by: Jason P <applewiz@mac.com>
* Adjust top distance for larger displays
* Adjust icon sizes for larger displays
* Fix Paxcounter compile errors after code updates
* Pixel wrangling to make larger screens fit better
* Alert frame has precedence over banner -- for now
* Unify on ALT_BUTTON
* Align AM/PM to the digit, not the segment on larger displays
* Move some global pin defines into configuration.h
* Scaffolding for BMM150 9-axis gyro
* Alt button behavior
* Don't add the blank GPS frames without HAS_GPS
* EVENT_NODEDB_UPDATED has been retired
* Clean out LOG_WARN messages from debugging
* Add dismiss message function
* Minor buttonThread cleanup
* Add BMM150 support
* Clean up last warning from dev
* Simplify bmm150 init return logic
* Add option to reply to messages
* Add minimal menu upon selecting home screen
* Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp
* Properly dismiss message
* T-Deck Trackball press is not user button
* Add select on favorite frame to launch cannedMessage DM
* Minor wording change
* Less capital letters
* Fix empty message check, time isn't reliable
* drop dead code
* Make UIRenderer a static class instead of namespace
* Fix the select on favorite
* Check if message is empty early and then 'return'
* Add kb_found, and show the option to launch freetype if appropriate
* Ignore impossible touchscreen touches
* Auto scroll fix
* Move linebreak after "from" for banners to maximize screen usage.
* Center "No messages to show" on Message frame
* Start consolidating buzzer behavior
* Fixed signed / unsigned warning
* Cast second parameter of max() to make some targets happy
* Cast kbchar to (char) to make arduino string happy
* Shorten the notice of "No messages"
* Add buzzer mode chooser
* Add regionPicker to Lora icon
* Reduce line spacing and reorder Position screen to resolve overlapping issues
* Update message titles, fix GPS icons, add Back options
* Leftover boops
* Remove chirp
* Make the region selection dismissable when a region is already set
* Add read-aloud functionality on messages w/ esp8266sam
* "Last Heard" is a better label
* tweak the beep
* 5 options
* properly tear down freetext upon cancel
* de-convelute canned messages just a bit
* Correct height of Mail icon in navigation bar
* Remove unused warning
* Consolidate time methods into TimeFormatters
* Oops
* Change LoRa Picker Cancel to Back
* Tweak selection characters on Banner
* Message render not scrolling on 5th line
* More fixes for message scrolling
* Remove the safety next on text overflow - we found that root cause
* Add pin definitions to fix compilation for obscure target
* Don't let the touchscreen send unitialized kbchar values
* Make virtual KB just a bit quicker
* No more double tap, swipe!
* Left is left, and Right is right
* Update horizontal lightning bolt design
* Move from solid to dashed separator for Message Frame
* Single emote feature fix
* Manually sort overlapping elements for now
* Freetext and clearer choices
* Fix ESP32 InkHUD builds on the unify-tft branch (#7087)
* Remove BaseUI branding
* Capitalization is fun
* Revert Meshtastic Boot Frame Changes
* Add ANZ_433 LoRa region to picker
* Update settings.json
---------
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Add __has_include blocks for sensors
* Put BMP and BME back in the right sensors
* Split environmental_base to environmental_extra, to compile the working sensor libs for Native
* Remove hard-coded checks for ARCH_PORTDUINO
* Un-clobber bmx160
* Move BusIO to environmental_extra due to Armv7 compile error
* Move to forked BusIO for the moment
* Switch to Meshtastic ICM-20948 lib for Portduino support
* Use 20948 for compass direction
* Compass is more than just RAK4631
* Cleanup for 20948 compass
* use Meshtastic branch of 20948 lib
* Check for HAS_SCREEN for showing calibration screen
* No accelerometerThread on STM32
* First addition of __has_include for sensor support
* Add __has_include blocks for sensors
* Put BMP and BME back in the right sensors
* Make TelemetrySensor::setup() a pure virtual finction
* Split environmental_base to environmental_extra, to compile the working sensor libs for Native
* Remove hard-coded checks for ARCH_PORTDUINO
* Un-clobber bmx160
* Move BusIO to environmental_extra due to Armv7 compile error
* Move to forked BusIO for the moment
* Enable HAS_SENSOR for Portduino
* Move back to Adafruit BusIO after patch
* * Update RAK9154 sensor to tx remote power telemetry
* remove uf2 script, pio run does that inline
* move sensor module to correct position
* disable LED and Accelerometer code on rak2560
* trunk fmt
* mention epaper variant
* attention, revert, revert
* Enable Environment Telemetry of these values
* fix float values
* Initiate magenetometer based compass calibration from button presses
- only active for BMX160 accelerometers on RAK_4631
- replace automatic calibration on power on with button triggered
calibration
- set 5 presses to trigger 30s calibration
- set 6 presses to trigger 60s calibration (useful if unit is not
handheld, ie vehicle mounted)
- show calibration time remaining on calibration alert screen
* Fix non RAK 4631 builds
- exclude changes from non RAK 4631 builds
- remove calls to screen when not present
* Fix build on RAK4631_eth_gw
- exclude all compass heading updates on variant without screen
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
As reported by @Mason10198, the WisMesh Pocket was always waking
on accelerometer motion.
This change gates the LIS3DH sensor's call to wakeScreen based on
config.display.wake_on_tap_or_motion .
fixes https://github.com/meshtastic/firmware/issues/5579
* T1000-E Peripherals
- enable intelligent charge controller signals
- enable Accelerometer
- enable internal I2C bus
- provide Power to Accelerometer
* POC Accelerometer Code (wakeScreen is moot for that device, just test if the driver works)
* fix building without the sensor
remove newline from logging statements in code. The LOG_* functions will now magically add it at the end.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Austin