* logging: gate LOG_TRACE behind MESHTASTIC_TRACE_LOGGING, drop redundant reclock logs
LOG_TRACE now compiles out by default so trace-level diagnostics cost no
flash; enable with -DMESHTASTIC_TRACE_LOGGING. Portduino keeps it on for
the traceFilename packet-trace feature.
Remove the 66 caller-side I2C reclock/restore log lines in the telemetry
sensors: ReClockI2C::setClock/restoreClock already log both frequencies
internally (now at trace level, since they fire every sensor read).
Also unify near-duplicate literals (colon/case/punctuation variants) so
linker string dedup applies, and drop an information-free bare 'done'.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1
* logging: demote chatty per-packet/per-poll DEBUG lines to trace level
With LOG_TRACE compiled out by default, per-iteration chatter (packet
bookkeeping, sensor poll values, e-ink refresh reasons, GPS pin states,
UI runState traces) now costs no flash on device builds while remaining
one -DMESHTASTIC_TRACE_LOGGING away. 108 lines demoted, 4 information-
free lines removed; failure paths, drop reasons, and one-time init logs
all stay at debug level.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1
* logging: address CodeRabbit review on trace-gate PR
- GPS: pass serial-derived buffers as %s args, never as format strings
(untrusted bytes could contain % directives)
- 0x%08x for packet id / NodeNum per convention (Router, CannedMessage,
NeighborInfo); unsigned casts for size_t args; %u for uint32_t delta
- EInk: async full-refresh begin/complete back to DEBUG (rare state
transitions); per-frame SKIPPED lines stay trace
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1
* logging: gate trace on the flag's value, not its presence
-DMESHTASTIC_TRACE_LOGGING=0 previously *enabled* trace logging because
the gate tested definedness. The flag now defaults per-platform
(portduino 1, else 0) and both backends test the value, so =0 disables,
=1 or a bare -D enables. Also cast tx_after-millis() to uint32_t for %u
(millis() is unsigned long on native).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1
* logging: clang-format rewrap after specifier widening
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1
* Even fewer bytes!
* logging: keep compile-gated debug lines at debug level; fix native-suite-count
Lines already inside default-off #ifdef blocks (GPS_DEBUG,
DEBUG_LOOP_TIMING) cost no flash and should stay visible at debug level
when their gate is enabled, rather than also requiring
MESHTASTIC_TRACE_LOGGING.
test/native-suite-count lags the two test_event_channel_* suites added
by #11045 (develop's Native Suite Count check has the same mismatch);
bump 46 -> 47.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1
* gps: route GPS_DEBUG diagnostics through a LOG_DEBUG_GPS() macro (#11414)
Replaces 27 log-only #ifdef GPS_DEBUG blocks across GPS.cpp,
PositionModule, MeshService, and GPSStatus.h with a single-line
LOG_DEBUG_GPS() call (src/gps/GPSLog.h, modeled on LOG_MIGRATION:
value-gated, ((void)0) when off). Blocks containing declarations,
control flow, hexDump, or nested conditionals keep an explicit
'#if GPS_DEBUG' guard. RTC.cpp's per-reading raw time dumps and
per-candidate rejection chatter fold under the same gate; quality
transitions and boot-time seeding stay at debug.
Also fixes the '// define GPS_DEBUG' missing-# typo in two variant
headers and updates all seven commented examples to the value form
('#define GPS_DEBUG 1') required by the value-based gate.
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1
Co-authored-by: Claude <noreply@anthropic.com>
* gps: declare RTC gmtime result as pointer to const (cppcheck)
With the setTime debug dump gated behind GPS_DEBUG, all remaining uses
of t are reads; cppcheck (constVariablePointer) now flags it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1
---------
Co-authored-by: Claude <noreply@anthropic.com>
The position frame's drawGpsCoordinates() only distinguished 'No GPS
present' / 'No GPS Lock' / coordinates, so a GNSS that had decoded
valid time but no fix displayed identically to a cold chip.
- GPSStatus: add per-acquisition hasTime flag (5th ctor param,
accessor, matches() term, updateStatus() copy)
- GPS::runOnce(): publish immediately on the gotTime rising edge so
the flag reaches observers on the time-only path, which previously
never published; done directly rather than via the end-of-loop
block so fixHoldEnds is preserved and hold/power behavior is
unchanged. Safe without a location: PositionModule ignores invalid
positions. gotTime is already cleared on each GPS_ACTIVE entry, so
the state is not sticky across acquisitions.
- UIRenderer::drawGpsCoordinates(): the 'No GPS Lock' line becomes
'GPS Time Only' when time is valid.
The drawGps() header renderer is intentionally untouched (its
branches need separate de-clobbering work).
Claude-Session: https://claude.ai/code/session_01CcrasD4QsatunDreANDgCx
Co-authored-by: Claude <noreply@anthropic.com>
I thought git would be smart enough to understand all the whitespace changes but even with all the flags I know to make it ignore theses it still blows up if there are identical changes on both sides.
I have a solution but it require creating a new commit at the merge base for each conflicting PR and merging it into develop.
I don't think blowing up all PRs is worth for now, maybe if we can coordinate this for V3 let's say.
This reverts commit 0d11331d18.
Adding a counter to show the last time a GPS coordinate was detected to ensure the user is aware how long since the coordinate updated or to identify any errors.
remove newline from logging statements in code. The LOG_* functions will now magically add it at the end.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add MaxNodes to Native
* It compiles...
* Convert nodedb to use new
* Closer but still broken.
* Finally working
* Remove unintended lines
* Don't include a pointer
* Capitalization matters.
* avoid rename in protocol regen
* When trimming the nodeDB, start with a cleanup
* Remove extra cleanupMeshDB() call for now
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix LOG_DEBUG messages when no DEBUG_PORT.
* Fix LOG_DEBUG messages when no DEBUG_PORT.
* Fix LOG_DEBUG messages when no DEBUG_PORT.
* Fix LOG_DEBUG messages when no DEBUG_PORT.
