Commit Graph
5 Commits
Author SHA1 Message Date
a541957480 ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)
* Migrate esp32 families to pioarduino platform

* ESP32c6 align text.handler_execute same as C3

* Use pioarduino `develop`

The latest fixes and the latest bugs!

* preliminary esp32p4.ini

* pioarduino: Update LovyanGFX

Includes Manuel's recent commit

* pioarduino 3.3.6

* pioarduino 3.3.6 *release*

chasing the release

* pioarduino: Fix OG ESP32 duplicate libs

* pioarduino: T-Beam 1W CDC mode

* pioarduino: disable network provisioning (wifiprov)

* pioarduino: use legacy esptoolpy naming (forward-compatible)

* Update lovyangfx from `develop` commit to 1.2.19

* fix esp32p4.ini

* check for esp32 w/ wifi

* esp32-p4 specific adaptations

* Switch to meshtastic/esp32_https_server fork (idf5 branch)

* don't ignore esp_lcd

* config for MUI

* fix/workaround SDMMC

* revert a6f6175, update to 3.3.8

* enable esp_hosted for esp32-p4 (experimental)

* Pioarduino 55.03.38-1

* NimBLE-Arduino -> Arduino "BLE" (3.3.x) migration (#10164)

* NimBLE-Arduino -> Arduino "BLE" (3.3.x) migration

* More NimBLE

* Fix Device Name in ATT Read Request (0x2A00).

Device Name is exposed in two places:

- Advertisement data: this is set properly in startAdvertising.
- GATT attribute Device Name (0x2A00). This one is handled internally in NimBLE
  and comes from ble_svc_gap_device_name_set. This is set initially, but then
  BLEDevice::createServer calls ble_svc_gap_init which resets the device name.
  This causes the device to apparently "change name after pairing":

< ACL Data TX:... flags 0x00 dlen 7  #113 [hci0] 14.241149
      ATT: Read Request (0x0a) len 2
        Handle: 0x0003 Type: Device Name (0x2a00)
> ACL Data RX: Handle 2048 flags 0x02 dlen 11             #115 [hci0] 14.269050
      ATT: Read Response (0x0b) len 6
        Value[6]: 6e696d626c65   # "nimble"

Workaround this by setting the device name once again after
BLEDevice::createServer.

* Temporarily lower CORE_DEBUG_LEVEL to INFO to avoid triggering an apparent ESP-IDF Bluetooth bug when re-connecting to Pixel 8 Android devices.

Initial pairing works, but after ESP32 is rebooted, phone fails to reconnect. Meshtastic app shows it as disconnecting immediately. LightBlue shows a more detailed error "Peripheral Connection - Warning: onConnectionStatusChange: status 61" (0x3D - MIC Failure).

Bug report to Espresssif: https://github.com/espressif/esp-idf/issues/18126#issuecomment-4286197744

* Temporarily disable ble_gap_set_data_len, causes crash with Pixel 8 Android reconnect.

Crash looks like this:
  [ 11966][E][BLEAdvertising.cpp:341] setScanResponseData(): ble_gap_adv_rsp_set_data: 22
  [ 11975][E][BLEAdvertising.cpp:1554] start(): Host reset, wait for sync.
  ERROR | ??:??:?? 11 BLE failed to start advertising
  Guru Meditation Error: Core  0 panic'ed (LoadProhibited). Exception was unhandled.

  Core  0 register dump:
  PC      : 0x420e6190  PS      : 0x00060730  A0      : 0x820e158b  A1      : 0x3fce50c0
  A2      : 0x00000000  A3      : 0x3fcb8600  A4      : 0x3fcb85cc  A5      : 0x00000000
  A6      : 0x00000000  A7      : 0x00000c03  A8      : 0x00000000  A9      : 0x3fce50b0
  A10     : 0x0000000e  A11     : 0x00000000  A12     : 0x00000010  A13     : 0x3fce50e0
  A14     : 0x00000c03  A15     : 0x00000001  SAR     : 0x0000001e  EXCCAUSE: 0x0000001c
  EXCVADDR: 0x00000000  LBEG    : 0x400570e8  LEND    : 0x400570f3  LCOUNT  : 0x00000000

  Backtrace: 0x420e618d:0x3fce50c0 0x420e1588:0x3fce5110 0x420dfe87:0x3fce5200 0x420dfefb:0x3fce5220 0x420dff3f:0x3fce5240 0x4219602b:0x3fce5260 0x4037b0e5:0x3fce5280 0x4201edf3:0x3fce52a0

Connection seems fast enough even without this. We'll investigate the
reason for the crash and re-enable once it's safe.

---------

Co-authored-by: Catalin Patulea <cronos586@gmail.com>

* Add extension from pioarduino nag
"Jason2866.esp-decoder"

* Cleanup after merge

* ESP32: Disable classic bluetooth

* Cleanup: Fix ADC channels on new variants

* InkHUD: Fix type casting for message size in saveToFlash method

inkhud compiles again!

* update p4 esp_hosted for BT

* I thought I fixed this

* fix linker error using response file (p4 only)

* fix infinite loop

* Fix Power.cpp check warning

Local variable 'config' shadows outer variable [shadowVariable]

* Build ESP32 original with NimBLE ('custom_sdkconfig' approach). (#10235)

* Re-enable littlefs json manifest

This works locally again :)
Not sure what changed

* Re-add tool-mklittlefs

* sensecap indicator fixes after upgrade arduino-esp & lovyanGFX libs

* hackaday fix

* robot tbeam cache error fix

Co-authored-by: Copilot <copilot@github.com>

* trunk fmt

* ignore trunk

* BLEDevice::deinit() added

Co-authored-by: Copilot <copilot@github.com>

* platformio-custom: Modify mtjson target dependency to prevent fake-success. (#10291)

Co-authored-by: Copilot <copilot@github.com>

* Fix ESP32-C6 linker errors.

Align .text.handler_execute section to 4 bytes and update watchdog timer core mask configuration

Co-authored-by: Copilot <copilot@github.com>

* tlora-c6: Disable Screen

MESHTASTIC_EXCLUDE_SCREEN=1 on tlora-c6.

It doesn't have a screen, and this gets it compiling again (saving flash).

* Use mverch's iram_memset hack for all OG-ESP32

* Refactor watchdog timer initialization and handling

* use adc_channel_t in variant.h

* Fix variant headers

* More idiomatic default ethernet that doesn't break the build

* Elecrows: Delete problematic variant.cpp

Not needed after USE_ETHERNET_DEFAULT

---------

Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
Co-authored-by: Catalin Patulea <cronos586@gmail.com>
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>
Co-authored-by: Copilot <copilot@github.com>
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2026-05-17 18:53:32 -05:00
Jorropo beb268ff25 Revert "add a .clang-format file (#9154)" (#9172)
I thought git would be smart enough to understand all the whitespace changes but even with all the flags I know to make it ignore theses it still blows up if there are identical changes on both sides.

I have a solution but it require creating a new commit at the merge base for each conflicting PR and merging it into develop.

I don't think blowing up all PRs is worth for now, maybe if we can coordinate this for V3 let's say.

This reverts commit 0d11331d18.
2026-01-04 05:15:53 -06:00
Jorropo 0d11331d18 add a .clang-format file (#9154) 2026-01-03 14:19:24 -06:00
4feaec651f Unify the native display config between legacy display and MUI (#6838)
* Add missed include

* Another Warning fix

* Add another HAS_SCREEN

* Namespace fixes

* Removed depricated destination types and re-factored destination screen

* Get rid of Arduino Strings

* Clean up after Copilot

* SixthLine Def, Screen Rename

Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment

* Consistency is hard - fixed "Sixth"

* System Frame Updates

Adjusted line construction to ensure we fit maximum content per screen.

* Fix up notifications

* Add a couple more ifdef HAS_SCREEN lines

* Add screen->isOverlayBannerShowing()

* Don't forget the invert!

* Adjust Nodelist Center Divider

Adjust Nodelist Center Divider

* Fix variable casting

* Fix entryText variable as empty before update to fix validation

* Altitude is int32_t

* Update PowerTelemetry to have correct data type

* Fix cppcheck warnings (#6945)

* Fix cppcheck warnings

* Adjust logic in Power.cpp for power sensor

---------

Co-authored-by: Jason P <applewiz@mac.com>

* More pixel wrangling so things line up NodeList edition

* Adjust NodeList alignments and plumb some background padding for a possible title fix

* Better alignment for banner notifications

* Move title into drawCommonHeader; initial screen tested

* Fonts make spacing items difficult

* Improved beeping booping and other buzzer based feedback (#6947)

* Improved beeping booping and other buzzer based feedback

* audible button feedback (#6949)

* Refactor

---------

Co-authored-by: todd-herbert <herbert.todd@gmail.com>

* Sandpapered the corners of the notification popup

* Finalize drawCommonHeader migration

* Update Title of Favorite Node Screens

* Update node metric alignment on LoRa screen

* Update the border for popups to separate it from background

* Update PaxcounterModule.cpp with CommonHeader

* Update WiFi screen with CommonHeader and related data reflow

* It was not, in fact, pointing up

* Fix build on wismeshtap

* T-deck trackball debounce

* Fix uptime on Device Focused page to actually detail

* Update Sys screen for new uptime, add label to Freq/Chan on LoRa

* Don't display DOP any longer, make Uptime consistent

* Revert Uptime change on Favorites, Apply to Device Focused

* Label the satelite number to avoid confusion

* Boop boop boop boop

* Correct GPS positioning and string consistency across strings for GPS

* Fix GPS text alignment

* Enable canned messages by default

* Don't wake screen on new nodes

* Cannedmessage list emote support added

* Fn+e emote picker for freetext screen

* Actually block CannedInput actions while display is shown

* Add selection menu to bannerOverlay

* Off by one

* Move to unified text layouts and spacing

* Still my Fav without an "e"

* Fully remove EVENT_NODEDB_UPDATED

* Simply LoRa screen

* Make some char pointers const to fix compilation on native targets

* Update drawCompassNorth to include radius

* Fix warning

* button thread cleanup

* Pull OneButton handling from PowerFSM and add MUI switch (#6973)

* Trunk

* Onebutton Menu Support

* Add temporary clock icon

* Add gps location to fsi

* Banner message state reset

* Cast to char to satisfy compiler

* Better fast handling of input during banner

* Fix warning

* Derp

* oops

* Update ref

* Wire buzzer_mode

* remove legacy string->print()

* Only init screen if one found

* Unsigned Char

* More buttonThread cleaning

* screen.cpp button handling cleanup

* The Great Event Rename of 2025

* Fix the Radiomaster

* Missed trackball type change

* Remove unused function

* Make ButtonThread an InputBroker

* Coffee hadn't kicked in yet

* Add clock icon for Navigation Bar

* Restore clock screen definition code - whoops

* ExternalNotifications now observe inputBroker

* Clock rework (#6992)

* Move Clock bits into ClockRenderer space

* Rework clock into all device navigation

* T-Watch Actually Builds Different

* Compile fix

---------

Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>

* Add AM/PM to Digital Clock

* Flip Seconds and AM/PM on Clock Display

* Tik-tok pixels are hard

* Fix builds on Thinknode M1

* Check for GPS and don't crash

* Don't endif til the end

* Rework the OneButton thread to be much less of a mess. (#6997)

* Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily

* Update src/input/ButtonThread.h

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* fix GPS toggle

* Send the shutdown event, not just the kbchar

* Honor the back button in a notificaiton popup

* Draw the right size box for popup with options

* Try to un-break all the things

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* 24-hour Clock Should have leading zero, but not 12-hour

* Fixup some compile errors

* Add intRoutine to ButtonThread init, to get more responsive user button back

* Add Timezone picker

* Fix Warning

* Optionally set the initial selection for the chooser popup

* Make back buttons work in canned messages

* Drop the wrapper classes

* LonPressTime now configurable

* Clock Frame can not longer be blank; just add valid time

* Back buttons everywhere!

* Key Verification confirm banner

* Make Elecrow M* top button a back button

* Add settings saves

* EInk responsiveness fixes

* Linux Input Fixes

* Add Native Trackball/Joystick support, and move UserButton to Input

* No Flight Stick Mode

* Send input event

* Add Channel Utilization to Device Focused frame

* Don't shift screens when we draw new ones

* Add showOverlayBanner arguments to no-op

* trunk

* Default Native trackball to NC

* Fix crash in simulator mode

* Add longLong button press

* Get the args right

* Adjust Bluetooth Pairing Screen to account for bottom navigation.

* Trackball everywhere, and unPhone buttons

* Remap visionmaster secondary button to TB_UP

* Kill ScanAndSelect

* trunk

* No longer need the canned messages input filter

* All Canned All the time

* Fix stm32 compile error regarding inputBroker

* Unify tft lineheights (#7033)

* Create variable line heights based upon SCREEN_HEIGHT

* Refactor textPositions into method -> getTextPositions

* Update SharedUIDisplay.h

---------

Co-authored-by: Jason P <applewiz@mac.com>

* Adjust top distance for larger displays

* Adjust icon sizes for larger displays

* Fix Paxcounter compile errors after code updates

* Pixel wrangling to make larger screens fit better

* Alert frame has precedence over banner -- for now

* Unify on ALT_BUTTON

* Align AM/PM to the digit, not the segment on larger displays

* Move some global pin defines into configuration.h

* Scaffolding for BMM150 9-axis gyro

* Alt button behavior

* Don't add the blank GPS frames without HAS_GPS

* EVENT_NODEDB_UPDATED has been retired

* Clean out LOG_WARN messages from debugging

* Add dismiss message function

* Minor buttonThread cleanup

* Add BMM150 support

* Clean up last warning from dev

* Simplify bmm150 init return logic

* Add option to reply to messages

* Add minimal menu upon selecting home screen

* Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp

* Properly dismiss message

* T-Deck Trackball press is not user button

* Add select on favorite frame to launch cannedMessage DM

* Minor wording change

* Less capital letters

* Fix empty message check, time isn't reliable

* drop dead code

* Make UIRenderer a static class instead of namespace

* Fix the select on favorite

* Check if message is empty early and then 'return'

* Add kb_found, and show the option to launch freetype if appropriate

* Ignore impossible touchscreen touches

* Auto scroll fix

* Move linebreak after "from" for banners to maximize screen usage.

* Center "No messages to show" on Message frame

* Start consolidating buzzer behavior

* Fixed signed / unsigned warning

* Cast second parameter of max() to make some targets happy

* Cast kbchar to (char) to make arduino string happy

* Shorten the notice of "No messages"

* Add buzzer mode chooser

* Add regionPicker to Lora icon

* Reduce line spacing and reorder Position screen to resolve overlapping issues

* Update message titles, fix GPS icons, add Back options

* Leftover boops

* Remove chirp

* Make the region selection dismissable when a region is already set

* Add read-aloud functionality on messages w/ esp8266sam

* "Last Heard" is a better label

* tweak the beep

* 5 options

* properly tear down freetext upon cancel

* de-convelute canned messages just a bit

* Correct height of Mail icon in navigation bar

* Remove unused warning

* Consolidate time methods into TimeFormatters

* Oops

* Change LoRa Picker Cancel to Back

* Tweak selection characters on Banner

* Message render not scrolling on 5th line

* More fixes for message scrolling

* Remove the safety next on text overflow - we found that root cause

* Add pin definitions to fix compilation for obscure target

* Don't let the touchscreen send unitialized kbchar values

* Make virtual KB just a bit quicker

* No more double tap, swipe!

* Left is left, and Right is right

* Update horizontal lightning bolt design

* Move from solid to dashed separator for Message Frame

* Single emote feature fix

* Manually sort overlapping elements for now

* Freetext and clearer choices

* Fix ESP32 InkHUD builds on the unify-tft branch (#7087)

* Remove BaseUI branding

* Capitalization is fun

* Revert Meshtastic Boot Frame Changes

* Add ANZ_433 LoRa region to picker

* Update settings.json

---------

Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
2025-06-21 06:36:04 -05:00
todd-herbert e0b4a8e31e Radio Master Joystick (#4476)
* Radio Master Bandit 5-Way Joystick: first draft
Untested on genuine hardware

* "Okay" moves to next frame, even when canned message disabled

* Refactor to allow easier customization

* Implement feedback from testing
* guard toggleGPS()
* show "Shutting down.." screen
* split adhoc ping alert onto two lines

* Don't block while waiting for shutdown
Was preventing the alert from showing
2024-08-17 05:51:53 -05:00