* logging: strip redundant punctuation, level prefixes, and 'successfully' from log strings
The logger already appends a newline and prints the level tag, so
trailing '.', '!', '...', literal \n, and 'Error:'/'Warning:' prefixes
inside format strings are wasted flash bytes. Same for 'successfully'
(the affirmative form already implies it).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1
* logging: tighten verbose log strings in modules, radio, platform, and system code
Rewrite wordy log messages to terser equivalents - drop filler words
(articles, 'attempting', 'due to', 'please'), use 'Can't X'/'X failed'
phrasing, and abbreviate where the codebase already does (config, init,
msg, BT). Format specifiers and argument lists are unchanged; distinctive
greppable tokens are preserved.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1
* logging: tighten verbose log strings in telemetry sensors and GPS
Same terseness pass: drop filler, 'Can't X'/'X failed' phrasing, common
abbreviations (temp, msg). Specifiers, arguments, and sensor-name
prefixes unchanged.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1
* logging: tighten verbose log strings in mesh core
Same terseness pass over NodeDB, Router, MeshService, PhoneAPI,
RadioInterface, NextHopRouter, and PacketHistory: 'X failed'/'Can't X'
phrasing, imperative verbs, dropped filler. Specifiers and arguments
unchanged; duplicate literals kept identical to preserve linker string
dedup.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1
* logging: 'Unable to/Could not/Cannot' -> "Can't" in log strings
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1
* logging: clang-format rewrap after string shortening
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1
* logging: restore boot-logo trailing newline and progress-dot strings
The terseness pass over-trimmed: the Meshtastic ASCII boot logo kept its
blank line via a trailing \n, and three bare "." progress ticks were
reduced to empty strings.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LBiZc9sfPrH1MZ2L3Fxgt1
* Update src/mesh/wifi/WiFiAPClient.cpp
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
* logging: address review feedback on the terseness audit
- Node/packet IDs use the repo's 0x%08x convention in NextHopRouter,
NodeDB, AdminModule and CannedMessageModule. The sibling log in each
if/else pair is converted too, so a pair isn't split across two formats.
next_hop stays 0x%x - it's the last-byte relay hint, not a NodeNum.
- RTC: the read-path and set-path "not found" warnings were byte-identical,
so the linker deduped them and the log couldn't say which one fired.
Split into "RTC read:" / "RTC set:". (The four sites live in mutually
exclusive #ifdef branches, so the RTC family was never ambiguous.)
- SCD4X getAmbientPressure()/setAmbientPressure() logged "altitude", and
SCD30 getASC() logged "Can't send command" for a read. Both now name the
operation they actually perform.
- LOG_ERROR already carries the level: ". Error: %u" -> ", rc=%u" (matching
the existing rc=%d house style) and "Error executing X()" -> "X() failed".
- Typos and wording: "OTA partiton. (Reason" -> "OTA partition (reason",
"CST3530 not response ~" -> "CST3530 no response", "Packet received with
to: of 0" -> "to=0", HostMetrics "Error decoding" -> "Can't decode", and
the dangling ": " on the NextHopRouter retransmission line.
Printf specifier sequences are byte-identical on all 37 touched lines apart
from the 6 deliberate %x/%u -> %08x node-ID widenings, all on uint32_t args.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Null-check packet allocations in allocForSending and its callers
Sibling of 0ae44d701.
* Null-check allocDataProtobuf, allocAckNak and allocErrorResponse callers
Second tier of the same nullable contract.
* Keep telemetry sleep scheduling on allocation failure
Allocation failure now marks the telemetry invalid instead of returning
early, so power-saving SENSOR nodes still arm deep sleep.
* clarify channel number formatting and fix the fixed-width padded nodeIDs
* use the explicit 0x%08x for packets and nodeIDs throughout
* LLM instructions
I thought git would be smart enough to understand all the whitespace changes but even with all the flags I know to make it ignore theses it still blows up if there are identical changes on both sides.
I have a solution but it require creating a new commit at the merge base for each conflicting PR and merging it into develop.
I don't think blowing up all PRs is worth for now, maybe if we can coordinate this for V3 let's say.
This reverts commit 0d11331d18.
This is a non-breaking change that increases the internal representation
of node counts from uint8_t (max 255) to uint16_t (max 65535) to support
larger mesh networks, particularly on ESP32-S3 devices with PSRAM.
Changes:
- NodeStatus: numOnline, numTotal, lastNumTotal (uint8_t -> uint16_t)
- ProtobufModule: numOnlineNodes (uint8_t -> uint16_t)
- MapApplet: loop counters changed to size_t for consistency with getNumMeshNodes()
- NodeStatus: Fixed log format to use %u for unsigned integers
Note: Default class methods keep uint32_t for numOnlineNodes parameter
to match the public API and allow flexibility, even though internal node
counts use uint16_t (max 65535 nodes).
This change does NOT affect protobuf definitions, maintaining wire
compatibility with existing clients and devices.
remove newline from logging statements in code. The LOG_* functions will now magically add it at the end.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Make SPI frequency configurable on Native
* Make the tophone queue size configurable for Portduino
* The modified SPISettings must be configured in setup(), after config.yaml is processed
* make MeshService a pointer, so we can configure MAX_RX_TOPHONE at run time
* Got a little over excited with refactoring
* Silence a warning
* Add congestion scaling coefficient
* Added active mesh sized based interval scaling
* Moved back to bottom
* Format
* Add observers and use correct number of online nodes
* Use `alterReceivedProtobuf()` for NeighborInfo and Traceroute
`alterReceived()` should never return NULL
Traceroute should be promiscuous
* Remove extensive logging from NeighborInfo module
* Add MaxNodes to Native
* It compiles...
* Convert nodedb to use new
* Closer but still broken.
* Finally working
* Remove unintended lines
* Don't include a pointer
* Capitalization matters.
* avoid rename in protocol regen
* When trimming the nodeDB, start with a cleanup
* Remove extra cleanupMeshDB() call for now
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Moved sender short name method into protobuf module
* Correct factory reset code for NRF (from 1.2)
* Use the correct fs abstraction
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
