AdminModule::handleReceivedProtobuf carried a 3008-byte stack frame - 37% of
the 8 KB Arduino loopTask stack. GCC inlines the eight handleGet* helpers into
it, each of which builds a whole meshtastic_AdminMessage (480 B), so the
dispatcher reserved a slot for every one of them at once even though only one
case ever runs. Two more full AdminMessages lived directly in the function.
That left any admin write short of stack for what runs beneath it:
NodeDB::saveToDisk -> saveProto -> pb_encode -> SafeFile -> LittleFS -> flash.
On heltec-v4 the canary fired at 7824 of 8192 bytes while writing
/prefs/config.proto, so no setting ever persisted and the device rebooted.
Mark the response builders NOINLINE and move the module-API and observer
responses into their own functions. Pure refactor; measured on heltec-v4 the
dispatcher frame drops 3008 -> 384 bytes, taking the crashing path from 368
bytes of headroom to 2992.
Fixes#11237
* feat: populate MyNodeInfo.device_id on all platforms
RP2040/RP2350 use the 64-bit pico unique board id, STM32WL the 96-bit
silicon UID, ESP32-S2 joins the existing OPTIONAL_UNIQUE_ID efuse branch,
and everything else (classic ESP32 in particular) falls back to a
deterministic factory-MAC-derived id, resolving the long-standing FIXME.
Portduino keeps the config-supplied id preferred and now uses the MAC
fallback when the config omits one.
No proto or persistence changes; the id is re-read from silicon each
boot and PhoneAPI still zeroes it for unauthenticated clients.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix: declare zero_mac const to satisfy cppcheck
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix: address review feedback on device_id derivation
Clear any disk-loaded device_id before the silicon derivation so a failed
read leaves it unset rather than stale (Copilot), and size the portduino
config copy with sizeof instead of a literal 16 (CodeRabbit).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* refactor: extract device_id generation into per-arch getDeviceId()
Per review feedback on #10995: move the platform-specific
MyNodeInfo.device_id derivation out of the #if/#elif ladder in
NodeDB.cpp into a getDeviceId() interface (target_specific.h)
implemented per-architecture alongside each platform's getMacAddr():
- esp32: efuse OPTIONAL_UNIQUE_ID (C3/S2/S3/C6); classic ESP32 -> MAC
- nrf52: FICR DEVICEID + DEVICEADDR
- nrf54l15: FICR->INFO.DEVICEID + DEVICEADDR (NRF_FICR-guarded, MAC fallback)
- rp2xx0: pico_get_unique_board_id()
- stm32wl: HAL_GetUIDw0/1/2()
- portduino: config-supplied id preferred, else MAC
The shared MAC-derived fallback moves to meshUtils as
getMacAddrDeviceId(). NodeDB.cpp now zero-inits the field and makes a
single getDeviceId() call, dropping ~65 lines of platform boilerplate
plus the esp_efuse/pico/stm32 includes that came with it. No behavior
change: device_id is still re-read from silicon each boot and never
persisted.
Builds green: native-macos, tbeam, heltec-v3, rak4631, rak11310, rak3172.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix: address review of device_id refactor
- getMacAddrDeviceId(): zero-init the mac[6] buffer. getMacAddr() can return
without writing (e.g. Portduino with no MAC source), so the old uninitialized
buffer let stack garbage pass the all-zeros guard and become device_id. The
pre-refactor code relied on the zero-initialized static ourMacAddr; restore
that guarantee.
- nrf54l15 getDeviceId(): drop the `#if defined(NRF_FICR)` guard and read FICR
unconditionally (as the pre-refactor NodeDB code did). The guarded #else fell
back to getMacAddr()'s hard-coded placeholder MAC, which would give every unit
an identical device_id; a missing NRF_FICR should be a loud compile error.
- NodeDB.cpp: `#include "target_specific.h"` instead of hand-copied externs for
getMacAddr/getDeviceId; retire the stale FIXME. Same for meshUtils.cpp (whose
extern comment wrongly claimed the TU was Arduino-free).
- Delete the orphaned commented-out device_id hex-dump block in NodeDB.cpp.
- Trim/de-duplicate the getDeviceId contract comments (single-sourced in
target_specific.h).
Builds green: native-macos, tbeam.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* docs: trim device_id comments to the repo's 1-2 line guideline
Addresses CodeRabbit review nitpick on #10995: shorten the getDeviceId()
(target_specific.h), getMacAddrDeviceId() (meshUtils.h), device-id refresh
(NodeDB.cpp), and nrf54l15 getDeviceId comments to two lines each, per the
"one or two lines maximum" coding guideline. Comment-only; no behavior change.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* asdf
* Implement SphereOfInfluenceModule for traffic management and eviction tracking
* Implement Sphere of Influence module for dynamic hop limit adjustment and role-based floor
* Update SAMPLING_DENOMINATOR to improve mesh size estimation accuracy
* Add debug logging for scale factor estimation and per-hop node counts in SphereOfInfluenceModule
* Enable variable hop limits and role-based hop floors in Sphere of Influence module
* Respond to copilot review
* Disable variable hop limits and role-based hop floors in Sphere of Influence module
* Apply suggestions from code review
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Implement adaptive sampling for unique node ID tracking in Sphere of Influence module
* Add state persistence for Sphere of Influence module
* Enhance Sphere of Influence module with state management and adaptive sampling adjustments
* Refactor hop scaling functionality: remove SphereOfInfluenceModule and introduce HopScalingModule
- Deleted SphereOfInfluenceModule.h, consolidating its responsibilities into the new HopScalingModule.
- Added HopScalingModule.h and HopScalingModule.cpp to manage hop scaling logic, including eviction tracking and sampling-based mesh size estimation.
- Implemented methods for recording evictions and packet senders, estimating scale factors, and computing required hops based on node activity.
- Introduced state persistence for hop scaling parameters to maintain continuity across reboots.
- Enhanced thread safety and modularity by utilizing concurrency features.
* Guard out STM32. Sowwy.
* Refactor HopScalingModule: enhance sampling logic and improve state management
* Add unit tests for HopScalingModule: implement mock database and various test scenarios
* Refactor test output in HopScalingModule tests: replace printf with TEST_MESSAGE for better integration with Unity
* Refactor HopScalingModule logging: replace lastStatusMode with descriptive mode names for improved readability
* Refactor test_main.cpp: change NodeNum variable to static and improve comments for clarity
* Remove unnecessary delay in setup function for improved test performance
* Add missing include for MeshTypes in test_main.cpp
* Refactor HopScalingModule tests: enhance mesh topology scenarios and improve test clarity
* Update HopScalingModule tests: flesh out node scenarios and improve clarity for dense and sparse mesh cases
* Fix politeness factor calculations in HopScalingModule and update related test scenarios for clarity. Remove outdated design doc.
* Enhance HopScalingModule: add sampled estimate for scaling decisions and refactor initial run state management
* Add sample traffic injection for HopScaling tests to enhance sampledEst visibility
* Enhance HopScalingModule: adjust windowFraction calculation for early triggers and improve test output formatting
* Enhance HopScalingModule: add jitter functionality to sampling denominator and update tests for consistent behavior
* Enhance HopScalingModule: implement adaptive sampling denominator adjustment and add reset functionality for tests
* Enhance HopScalingTestShim: add test-only clock and window helpers, update injectSampleTraffic for adaptive sampling, and improve scenario summary output
* Enhance HopScalingModule: add detailed documentation for functions, improve clarity of jitter and sampling logic, and reset functionality in tests
* Enhance HopScalingModule: add evictionEstimate parameter to estimateScaleFactor and update related logging for improved mesh size estimation
* Enhance HopScalingModule: adjust effective rolls calculation for improved accuracy, add eviction estimate logic, responding to all copilot review points
* Implement CompactHistogram for parallel hop scaling sampling
- Added CompactHistogram class to track node hop distances with bitwise sampling.
- Integrated CompactHistogram into HopScalingModule for independent packet sampling.
- Updated NodeDB to feed both the hop scaling module and the new histogram sampler.
- Enhanced HopScalingModule with methods to sample packets for the histogram and retrieve hop distribution statistics.
- Implemented tests for CompactHistogram functionality, including sampling, window rolling, and adaptive denominator scaling.
- Updated existing tests to validate the integration of the new histogram sampling mechanism.
* Enhance CompactHistogram and HopScalingModule: add per-hop distribution functionality, improve time handling for unit tests, and refine test setup for deterministic behavior
* CompactHistogram: add mesh size estimation, improve entry replacement logic, and update logging for per-hop distribution
* Refactor HopScalingModule and CompactHistogram integration
- Removed the suggestedHopFromCompactHistogram function to streamline hop suggestion logic.
- Updated HopScalingModule to directly utilize CompactHistogram's internal methods for hop suggestions and sampling.
- Enhanced logging in HopScalingModule to provide detailed histogram statistics.
- Modified test cases to ensure comprehensive coverage of new histogram behaviors and sampling logic.
- Improved node ID distribution in tests to better exercise sampling mechanisms.
- Ensured that filtering denominators are held for 12 hours before dropping, enhancing stability in sampling.
* Refactor CompactHistogram to support 13-hour activity tracking and introduce politeness regimes
- Updated the bitfield structure to accommodate 13-hour seen tracking.
- Changed the logic in rollHour() to analyze activity over the last 0-2 hours vs. 1-3 hours for politeness factor calculation.
- Introduced three politeness levels: GENEROUS, DEFAULT, and STRICT based on recent activity ratios.
- Adjusted filtering and sampling logic to reflect the new 13-hour tracking period.
- Updated unit tests to validate new behavior and ensure proper functionality of politeness regimes.
* Enhance CompactHistogram and HopScalingModule for improved sampling and decision-making
- Introduced a session-specific hash seed in CompactHistogram to reduce bias in node ID sampling.
- Updated sampling logic to use hashed node IDs instead of raw IDs for filtering and entry management.
- Added histogram rollover tracking in HopScalingModule to ensure proper decision-making after initial data collection.
- Adjusted logging to reflect the active state of the histogram and its comparison with NodeDB advisory hops.
- Enhanced unit tests to validate new sampling logic and memory layout changes.
* Expose hashNodeId for testing in CompactHistogram
* Add mesh trend statistics to CompactHistogram for enhanced activity tracking
* Implement histogram state persistence in CompactHistogram with save and load functions
* Refactor CompactHistogram to improve entry management and enhance rollHour logging
* feat: add HopScalingModule for adaptive hop limit recommendations
Introduces HopScalingModule, a sampled hop-distance histogram that
recommends the minimum hop limit needed to reach ~40 nodes, and
automatically reducing the hops as the mesh grows.
Key design:
- 512-byte packed histogram (128 × 4-byte Record entries) embedded
in a new HopScalingModule.
- Each Record: 16-bit node hash, 3-bit hop distance, 13-bit seen bitmap
- Sampling filter: only nodes where (hash & (denom-1)) == 0 are kept;
denominator doubles on overflow and halves when utilisation is low
- Hourly rollHour(): tallies per-hop counts, walks scaled buckets to
find the minimum hop satisfying TARGET_AFFECTED_NODES (40), applies a
politeness extension based on recent/older activity ratio, shifts all
seen bitmaps, and persists state to /prefs/hopScalingState.bin
- Hop recommendation gated by bootstrap (requires >=1 rollHour before
overriding HOP_MAX)
- NodeDB calls samplePacketForHistogram() on every non-MQTT rx packet
- Module also estimates total mesh size and logs useful information about
mesh characteristics.
Changes:
- src/modules/HopScalingModule.h/.cpp: new module
- src/mesh/NodeDB.cpp: wire up samplePacketForHistogram
- src/mesh/Router.cpp: consume getLastRequiredHop()
- test/test_hop_scaling/: 12-test suite covering all mesh topologies and
anticipated operational requirements
* test: increase run iterations in sparse to dense transition test
* feat: refactor HopScalingModule to use RUNS_PER_HOUR constant and improve logging
* feat: enhance HopScalingModule with filtering denominator management and add tests for state transitions
* refactor: remove CompactHistogram module and related files
* address copilot review comments
* Tweak: packet sampling only lora
* ove role-based hop floor logic and related definitions into the module - keep it in one place.
* Refactor MockNodeDB to use nodeInfoLiteSetBit for MQTT flag setting
* Refactor hop scaling parameters and logic to integer maths and put default values in defaults.h. Small flash size reduction, no functional impact.
* Update unit test preprocessor directives to PIO_UNIT_TESTING for consistency
* refactor: improve test output organization and clarity in hop scaling tests
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Use hash table for O(1) lookup of recently seen packets
* Eliminate a packet lookup during deduplication
* Infinite loop checks for find and remove
* Consolidate conditional compilation
* Exclude hash table from minimal build
* Additional comment on hash table capacity
* Unit tests for packet history changes
* Update incorrect comment about size clamp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Const
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* refactor: update throttling factor calculation and add unit tests for scaling behavior
* refactor: adjust throttling factor calculation for improved accuracy in different configurations
* Update src/mesh/Default.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/mesh/Default.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* refactor: enhance throttling factor calculation and introduce pow_of_2 utility function
* refactor: improve expected ms calculation in unit tests for Default::getConfiguredOrDefaultMsScaled
* refactor: improve scaling logic for routers and sensors in computeExpectedMs function
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Add missed include
* Another Warning fix
* Add another HAS_SCREEN
* Namespace fixes
* Removed depricated destination types and re-factored destination screen
* Get rid of Arduino Strings
* Clean up after Copilot
* SixthLine Def, Screen Rename
Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment
* Consistency is hard - fixed "Sixth"
* System Frame Updates
Adjusted line construction to ensure we fit maximum content per screen.
* Fix up notifications
* Add a couple more ifdef HAS_SCREEN lines
* Add screen->isOverlayBannerShowing()
* Don't forget the invert!
* Adjust Nodelist Center Divider
Adjust Nodelist Center Divider
* Fix variable casting
* Fix entryText variable as empty before update to fix validation
* Altitude is int32_t
* Update PowerTelemetry to have correct data type
* Fix cppcheck warnings (#6945)
* Fix cppcheck warnings
* Adjust logic in Power.cpp for power sensor
---------
Co-authored-by: Jason P <applewiz@mac.com>
* More pixel wrangling so things line up NodeList edition
* Adjust NodeList alignments and plumb some background padding for a possible title fix
* Better alignment for banner notifications
* Move title into drawCommonHeader; initial screen tested
* Fonts make spacing items difficult
* Improved beeping booping and other buzzer based feedback (#6947)
* Improved beeping booping and other buzzer based feedback
* audible button feedback (#6949)
* Refactor
---------
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
* Sandpapered the corners of the notification popup
* Finalize drawCommonHeader migration
* Update Title of Favorite Node Screens
* Update node metric alignment on LoRa screen
* Update the border for popups to separate it from background
* Update PaxcounterModule.cpp with CommonHeader
* Update WiFi screen with CommonHeader and related data reflow
* It was not, in fact, pointing up
* Fix build on wismeshtap
* T-deck trackball debounce
* Fix uptime on Device Focused page to actually detail
* Update Sys screen for new uptime, add label to Freq/Chan on LoRa
* Don't display DOP any longer, make Uptime consistent
* Revert Uptime change on Favorites, Apply to Device Focused
* Label the satelite number to avoid confusion
* Boop boop boop boop
* Correct GPS positioning and string consistency across strings for GPS
* Fix GPS text alignment
* Enable canned messages by default
* Don't wake screen on new nodes
* Cannedmessage list emote support added
* Fn+e emote picker for freetext screen
* Actually block CannedInput actions while display is shown
* Add selection menu to bannerOverlay
* Off by one
* Move to unified text layouts and spacing
* Still my Fav without an "e"
* Fully remove EVENT_NODEDB_UPDATED
* Simply LoRa screen
* Make some char pointers const to fix compilation on native targets
* Update drawCompassNorth to include radius
* Fix warning
* button thread cleanup
* Pull OneButton handling from PowerFSM and add MUI switch (#6973)
* Trunk
* Onebutton Menu Support
* Add temporary clock icon
* Add gps location to fsi
* Banner message state reset
* Cast to char to satisfy compiler
* Better fast handling of input during banner
* Fix warning
* Derp
* oops
* Update ref
* Wire buzzer_mode
* remove legacy string->print()
* Only init screen if one found
* Unsigned Char
* More buttonThread cleaning
* screen.cpp button handling cleanup
* The Great Event Rename of 2025
* Fix the Radiomaster
* Missed trackball type change
* Remove unused function
* Make ButtonThread an InputBroker
* Coffee hadn't kicked in yet
* Add clock icon for Navigation Bar
* Restore clock screen definition code - whoops
* ExternalNotifications now observe inputBroker
* Clock rework (#6992)
* Move Clock bits into ClockRenderer space
* Rework clock into all device navigation
* T-Watch Actually Builds Different
* Compile fix
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Add AM/PM to Digital Clock
* Flip Seconds and AM/PM on Clock Display
* Tik-tok pixels are hard
* Fix builds on Thinknode M1
* Check for GPS and don't crash
* Don't endif til the end
* Rework the OneButton thread to be much less of a mess. (#6997)
* Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily
* Update src/input/ButtonThread.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* fix GPS toggle
* Send the shutdown event, not just the kbchar
* Honor the back button in a notificaiton popup
* Draw the right size box for popup with options
* Try to un-break all the things
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* 24-hour Clock Should have leading zero, but not 12-hour
* Fixup some compile errors
* Add intRoutine to ButtonThread init, to get more responsive user button back
* Add Timezone picker
* Fix Warning
* Optionally set the initial selection for the chooser popup
* Make back buttons work in canned messages
* Drop the wrapper classes
* LonPressTime now configurable
* Clock Frame can not longer be blank; just add valid time
* Back buttons everywhere!
* Key Verification confirm banner
* Make Elecrow M* top button a back button
* Add settings saves
* EInk responsiveness fixes
* Linux Input Fixes
* Add Native Trackball/Joystick support, and move UserButton to Input
* No Flight Stick Mode
* Send input event
* Add Channel Utilization to Device Focused frame
* Don't shift screens when we draw new ones
* Add showOverlayBanner arguments to no-op
* trunk
* Default Native trackball to NC
* Fix crash in simulator mode
* Add longLong button press
* Get the args right
* Adjust Bluetooth Pairing Screen to account for bottom navigation.
* Trackball everywhere, and unPhone buttons
* Remap visionmaster secondary button to TB_UP
* Kill ScanAndSelect
* trunk
* No longer need the canned messages input filter
* All Canned All the time
* Fix stm32 compile error regarding inputBroker
* Unify tft lineheights (#7033)
* Create variable line heights based upon SCREEN_HEIGHT
* Refactor textPositions into method -> getTextPositions
* Update SharedUIDisplay.h
---------
Co-authored-by: Jason P <applewiz@mac.com>
* Adjust top distance for larger displays
* Adjust icon sizes for larger displays
* Fix Paxcounter compile errors after code updates
* Pixel wrangling to make larger screens fit better
* Alert frame has precedence over banner -- for now
* Unify on ALT_BUTTON
* Align AM/PM to the digit, not the segment on larger displays
* Move some global pin defines into configuration.h
* Scaffolding for BMM150 9-axis gyro
* Alt button behavior
* Don't add the blank GPS frames without HAS_GPS
* EVENT_NODEDB_UPDATED has been retired
* Clean out LOG_WARN messages from debugging
* Add dismiss message function
* Minor buttonThread cleanup
* Add BMM150 support
* Clean up last warning from dev
* Simplify bmm150 init return logic
* Add option to reply to messages
* Add minimal menu upon selecting home screen
* Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp
* Properly dismiss message
* T-Deck Trackball press is not user button
* Add select on favorite frame to launch cannedMessage DM
* Minor wording change
* Less capital letters
* Fix empty message check, time isn't reliable
* drop dead code
* Make UIRenderer a static class instead of namespace
* Fix the select on favorite
* Check if message is empty early and then 'return'
* Add kb_found, and show the option to launch freetype if appropriate
* Ignore impossible touchscreen touches
* Auto scroll fix
* Move linebreak after "from" for banners to maximize screen usage.
* Center "No messages to show" on Message frame
* Start consolidating buzzer behavior
* Fixed signed / unsigned warning
* Cast second parameter of max() to make some targets happy
* Cast kbchar to (char) to make arduino string happy
* Shorten the notice of "No messages"
* Add buzzer mode chooser
* Add regionPicker to Lora icon
* Reduce line spacing and reorder Position screen to resolve overlapping issues
* Update message titles, fix GPS icons, add Back options
* Leftover boops
* Remove chirp
* Make the region selection dismissable when a region is already set
* Add read-aloud functionality on messages w/ esp8266sam
* "Last Heard" is a better label
* tweak the beep
* 5 options
* properly tear down freetext upon cancel
* de-convelute canned messages just a bit
* Correct height of Mail icon in navigation bar
* Remove unused warning
* Consolidate time methods into TimeFormatters
* Oops
* Change LoRa Picker Cancel to Back
* Tweak selection characters on Banner
* Message render not scrolling on 5th line
* More fixes for message scrolling
* Remove the safety next on text overflow - we found that root cause
* Add pin definitions to fix compilation for obscure target
* Don't let the touchscreen send unitialized kbchar values
* Make virtual KB just a bit quicker
* No more double tap, swipe!
* Left is left, and Right is right
* Update horizontal lightning bolt design
* Move from solid to dashed separator for Message Frame
* Single emote feature fix
* Manually sort overlapping elements for now
* Freetext and clearer choices
* Fix ESP32 InkHUD builds on the unify-tft branch (#7087)
* Remove BaseUI branding
* Capitalization is fun
* Revert Meshtastic Boot Frame Changes
* Add ANZ_433 LoRa region to picker
* Update settings.json
---------
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
remove newline from logging statements in code. The LOG_* functions will now magically add it at the end.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Re-implement PKI from #1509
co-authored-by: edinnen <ethanjdinnen@protonmail.com>
* Set the key lengnth to actually make PKI work.
* Remove unused variable and initialize keys to null
* move printBytes() to meshUtils
* Don't reset PKI key son reboot unless needed.
* Remove double encryption for PKI messages
* Cleanup encrypt logic
* Add the MESHTASTIC_EXCLUDE_PKI option, and set it for minimal builds. Required for STM32 targets for now.
* Use SHA-256 for PKI key hashing, and add MESHTASTIC_EXCLUDE_PKI_KEYGEN for STM32
* Fix a crash when node is null
* Don't send PKI encrypted packets while licensed
* use chIndex 8 for PKI
* Don't be so clever, that you corrupt incoming packets
* Pass on channel 8 for now
* Typo
* Lock keys once non-zero
* We in fact need 2 scratch buffers, to store the encrypted bytes, unencrypted bytes, and decoded protobuf.
* Lighter approach to retaining known key
* Attach the public key to PKI decrypted packets in device memory
* Turn PKI back off for STM32 :(
* Don't just memcp over a protobuf
* Don't PKI encrypt nodeinfo packets
* Add a bit more memory logging around nodeDB
* Use the proper macro to refer to NODENUM_BROADCAST
* Typo fix
* Don't PKI encrypt ROUTING (naks and acks)
* Adds SecurityConfig protobuf
* Add admin messages over PKI
* Disable PKI for the WIO-e5
* Add MINIMUM_SAFE_FREE_HEAP macro and set to safe 1.5k
* Add missed "has_security"
* Add the admin_channel_enabled option
* STM32 again
* add missed configuration.h at the top of files
* Add EXCLUDE_TZ and RTC
* Enable PKI build on STM32 once again
* Attempt 1 at moving PKI to aes-ccm
* Fix buffers for encrypt/decrypt
* Eliminate unused aes variable
* Add debugging lines
* Set hash to 0 for PKI
* Fix debug lines so they don't print pointers.
* logic fix and more debug
* Rather important typo
* Check for short packets before attempting decrypt
* Don't forget to give cryptoEngine the keys!
* Use the right scratch buffer
* Cleanup
* moar cleanups
* Minor hardening
* Remove some in-progress stuff
* Turn PKI back off on STM32
* Return false
* 2.5 protos
* Sync up protos
* Add initial cryptography test vector tests
* re-add MINIMUM_SAFE_FREE_HEAP
* Housekeeping and comment fixes
* Add explanatory comment about weak dh25519 keys
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Move to Portduino's getMacAddr()
* Add ST7735/S screen support
* Push Raspbian support into native target
* Remove latent pigpio references.
* CardKB defensive programming
* Adds configurable spidev
* Fixes to build on Fedora 40
* ENUMs are not #defines. Pull latest portduino
* Add more configuration options for SPI displays
* Add config.yaml option to set DIO3_TCXO_VOLTAGE
* change tft clear() to fillScreen()
Maintains compatability with ESPI driver.
* Adds TXen and RXen pins to portduino
* Add -c --config options to specify config file
* Fail when a specified config file is unavailable
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Ben Meadors