clean up merge

.clusterfuzzlite/Dockerfile

@@ -20,7 +20,7 @@ ENV PIP_ROOT_USER_ACTION=ignore
 RUN apt-get update && apt-get install --no-install-recommends -y \
         cmake git zip libgpiod-dev libbluetooth-dev libi2c-dev \
         libunistring-dev libmicrohttpd-dev libgnutls28-dev libgcrypt20-dev \
-        libusb-1.0-0-dev libssl-dev pkg-config libsqlite3-dev libsdl2-dev && \
+        libusb-1.0-0-dev libssl-dev pkg-config && \
     apt-get clean && rm -rf /var/lib/apt/lists/* && \
     pip install --no-cache-dir -U \
         platformio==6.1.16 \

.envrc

@@ -1 +0,0 @@
-use nix

.github/actions/build-variant/action.yml

@@ -76,7 +76,7 @@ runs:
         done
 
     - name: PlatformIO ${{ inputs.arch }} download cache
-      uses: actions/cache@v5
+      uses: actions/cache@v4
       with:
         path: ~/.platformio/.cache
         key: pio-cache-${{ inputs.arch }}-${{ hashFiles('.github/actions/**', '**.ini') }}
@@ -100,7 +100,7 @@ runs:
       id: version
 
     - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v6
+      uses: actions/upload-artifact@v5
       with:
         name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}
         overwrite: true

.github/copilot-instructions.md

@@ -1,314 +0,0 @@
-# Meshtastic Firmware - Copilot Instructions
-
-This document provides context and guidelines for AI assistants working with the Meshtastic firmware codebase.
-
-## Project Overview
-
-Meshtastic is an open-source LoRa mesh networking project for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware enables text messaging, location sharing, and telemetry over a decentralized mesh network.
-
-### Supported Hardware Platforms
-
-- **ESP32** (ESP32, ESP32-S3, ESP32-C3) - Most common platform
-- **nRF52** (nRF52840, nRF52833) - Low power Nordic chips
-- **RP2040/RP2350** - Raspberry Pi Pico variants
-- **STM32WL** - STM32 with integrated LoRa
-- **Linux/Portduino** - Native Linux builds (Raspberry Pi, etc.)
-
-### Supported Radio Chips
-
-- **SX1262/SX1268** - Sub-GHz LoRa (868/915 MHz regions)
-- **SX1280** - 2.4 GHz LoRa
-- **LR1110/LR1120/LR1121** - Wideband radios (sub-GHz and 2.4 GHz capable, but not simultaneously)
-- **RF95** - Legacy RFM95 modules
-- **LLCC68** - Low-cost LoRa
-
-### MQTT Integration
-
-MQTT provides a bridge between Meshtastic mesh networks and the internet, enabling nodes with network connectivity to share messages with remote meshes or external services.
-
-#### Key Components
-
-- **`src/mqtt/MQTT.cpp`** - Main MQTT client singleton, handles connection and message routing
-- **`src/mqtt/ServiceEnvelope.cpp`** - Protobuf wrapper for mesh packets sent over MQTT
-- **`moduleConfig.mqtt`** - MQTT module configuration
-
-#### MQTT Topic Structure
-
-Messages are published/subscribed using a hierarchical topic format:
-
-```
-{root}/{channel_id}/{gateway_id}
-```
-
-- `root` - Configurable prefix (default: `msh`)
-- `channel_id` - Channel name/identifier
-- `gateway_id` - Node ID of the publishing gateway
-
-#### Configuration Defaults (from `Default.h`)
-
-```cpp
-#define default_mqtt_address "mqtt.meshtastic.org"
-#define default_mqtt_username "meshdev"
-#define default_mqtt_password "large4cats"
-#define default_mqtt_root "msh"
-#define default_mqtt_encryption_enabled true
-#define default_mqtt_tls_enabled false
-```
-
-#### Key Concepts
-
-- **Uplink** - Mesh packets sent TO the MQTT broker (controlled by `uplink_enabled` per channel)
-- **Downlink** - MQTT messages received and injected INTO the mesh (controlled by `downlink_enabled` per channel)
-- **Encryption** - When `encryption_enabled` is true, only encrypted packets are sent; plaintext JSON is disabled
-- **ServiceEnvelope** - Protobuf wrapper containing packet + channel_id + gateway_id for routing
-- **JSON Support** - Optional JSON encoding for integration with external systems (disabled on nRF52 by default)
-
-#### PKI Messages
-
-PKI (Public Key Infrastructure) messages have special handling:
-
-- Accepted on a special "PKI" channel
-- Allow encrypted DMs between nodes that discovered each other on downlink-enabled channels
-
-## Project Structure
-
-```
-firmware/
-├── src/                    # Main source code
-│   ├── main.cpp           # Application entry point
-│   ├── mesh/              # Core mesh networking
-│   │   ├── NodeDB.*       # Node database management
-│   │   ├── Router.*       # Packet routing
-│   │   ├── Channels.*     # Channel management
-│   │   ├── *Interface.*   # Radio interface implementations
-│   │   └── generated/     # Protobuf generated code
-│   ├── modules/           # Feature modules (Position, Telemetry, etc.)
-│   ├── gps/               # GPS handling
-│   ├── graphics/          # Display drivers and UI
-│   ├── platform/          # Platform-specific code
-│   ├── input/             # Input device handling
-│   └── concurrency/       # Threading utilities
-├── variants/              # Hardware variant definitions
-│   ├── esp32/            # ESP32 variants
-│   ├── esp32s3/          # ESP32-S3 variants
-│   ├── nrf52/            # nRF52 variants
-│   └── rp2xxx/           # RP2040/RP2350 variants
-├── protobufs/            # Protocol buffer definitions
-├── boards/               # Custom PlatformIO board definitions
-└── bin/                  # Build and utility scripts
-```
-
-## Coding Conventions
-
-### General Style
-
-- Follow existing code style - run `trunk fmt` before commits
-- Prefer `LOG_DEBUG`, `LOG_INFO`, `LOG_WARN`, `LOG_ERROR` for logging
-- Use `assert()` for invariants that should never fail
-
-### Naming Conventions
-
-- Classes: `PascalCase` (e.g., `PositionModule`, `NodeDB`)
-- Functions/Methods: `camelCase` (e.g., `sendOurPosition`, `getNodeNum`)
-- Constants/Defines: `UPPER_SNAKE_CASE` (e.g., `MAX_INTERVAL`, `ONE_DAY`)
-- Member variables: `camelCase` (e.g., `lastGpsSend`, `nodeDB`)
-- Config defines: `USERPREFS_*` for user-configurable options
-
-### Key Patterns
-
-#### Module System
-
-Modules inherit from `MeshModule` or `ProtobufModule<T>` and implement:
-
-- `handleReceivedProtobuf()` - Process incoming packets
-- `allocReply()` - Generate response packets
-- `runOnce()` - Periodic task execution (returns next run interval in ms)
-
-```cpp
-class MyModule : public ProtobufModule<meshtastic_MyMessage>
-{
-  protected:
-    virtual bool handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_MyMessage *msg) override;
-    virtual int32_t runOnce() override;
-};
-```
-
-#### Configuration Access
-
-- `config.*` - Device configuration (LoRa, position, power, etc.)
-- `moduleConfig.*` - Module-specific configuration
-- `channels.*` - Channel configuration and management
-
-#### Default Values
-
-Use the `Default` class helpers in `src/mesh/Default.h`:
-
-- `Default::getConfiguredOrDefaultMs(configured, default)` - Returns ms, using default if configured is 0
-- `Default::getConfiguredOrMinimumValue(configured, min)` - Enforces minimum values
-- `Default::getConfiguredOrDefaultMsScaled(configured, default, numNodes)` - Scales based on network size
-
-#### Thread Safety
-
-- Use `concurrency::Lock` for mutex protection
-- Radio SPI access uses `SPILock`
-- Prefer `OSThread` for background tasks
-
-### Hardware Variants
-
-Each hardware variant has:
-
-- `variant.h` - Pin definitions and hardware capabilities
-- `platformio.ini` - Build configuration
-- Optional: `pins_arduino.h`, `rfswitch.h`
-
-Key defines in variant.h:
-
-```cpp
-#define USE_SX1262          // Radio chip selection
-#define HAS_GPS 1           // Hardware capabilities
-#define LORA_CS 36          // Pin assignments
-#define SX126X_DIO1 14      // Radio-specific pins
-```
-
-### Protobuf Messages
-
-- Defined in `protobufs/meshtastic/*.proto`
-- Generated code in `src/mesh/generated/`
-- Regenerate with `bin/regen-protos.sh`
-- Message types prefixed with `meshtastic_`
-
-### Conditional Compilation
-
-```cpp
-#if !MESHTASTIC_EXCLUDE_GPS        // Feature exclusion
-#ifdef ARCH_ESP32                   // Architecture-specific
-#if defined(USE_SX1262)            // Radio-specific
-#ifdef HAS_SCREEN                   // Hardware capability
-#if USERPREFS_EVENT_MODE           // User preferences
-```
-
-## Build System
-
-Uses **PlatformIO** with custom scripts:
-
-- `bin/platformio-pre.py` - Pre-build script
-- `bin/platformio-custom.py` - Custom build logic
-
-Build commands:
-
-```bash
-pio run -e tbeam              # Build specific target
-pio run -e tbeam -t upload    # Build and upload
-pio run -e native             # Build native/Linux version
-```
-
-## Common Tasks
-
-### Adding a New Module
-
-1. Create `src/modules/MyModule.cpp` and `.h`
-2. Inherit from appropriate base class
-3. Register in `src/modules/Modules.cpp`
-4. Add protobuf messages if needed in `protobufs/`
-
-### Adding a New Hardware Variant
-
-1. Create directory under `variants/<arch>/<name>/`
-2. Add `variant.h` with pin definitions
-3. Add `platformio.ini` with build config
-4. Reference common configs with `extends`
-
-### Modifying Configuration Defaults
-
-- Check `src/mesh/Default.h` for default value defines
-- Check `src/mesh/NodeDB.cpp` for initialization logic
-- Consider `isDefaultChannel()` checks for public channel restrictions
-
-## Important Considerations
-
-### Traffic Management
-
-The mesh network has limited bandwidth. When modifying broadcast intervals:
-
-- Respect minimum intervals on default/public channels
-- Use `Default::getConfiguredOrMinimumValue()` to enforce minimums
-- Consider `numOnlineNodes` scaling for congestion control
-
-### Power Management
-
-Many devices are battery-powered:
-
-- Use `IF_ROUTER(routerVal, normalVal)` for role-based defaults
-- Check `config.power.is_power_saving` for power-saving modes
-- Implement proper `sleep()` methods in radio interfaces
-
-### Channel Security
-
-- `channels.isDefaultChannel(index)` - Check if using default/public settings
-- Default channels get stricter rate limits to prevent abuse
-- Private channels may have relaxed limits
-
-## GitHub Actions CI/CD
-
-The project uses GitHub Actions extensively for CI/CD. Key workflows are in `.github/workflows/`:
-
-### Core CI Workflows
-
-- **`main_matrix.yml`** - Main CI pipeline, runs on push to `master`/`develop` and PRs
-  - Uses `bin/generate_ci_matrix.py` to dynamically generate build targets
-  - Builds all supported hardware variants
-  - PRs build a subset (`--level pr`) for faster feedback
-
-- **`trunk_check.yml`** - Code quality checks on PRs
-  - Runs Trunk.io for linting and formatting
-  - Must pass before merge
-
-- **`tests.yml`** - End-to-end and hardware tests
-  - Runs daily on schedule
-  - Includes native tests and hardware-in-the-loop testing
-
-- **`test_native.yml`** - Native platform unit tests
-  - Runs `pio test -e native`
-
-### Release Workflows
-
-- **`release_channels.yml`** - Triggered on GitHub release publish
-  - Builds Docker images
-  - Packages for PPA (Ubuntu), OBS (openSUSE), and COPR (Fedora)
-  - Handles Alpha/Beta/Stable release channels
-
-- **`nightly.yml`** - Nightly builds from develop branch
-
-- **`docker_build.yml`** / **`docker_manifest.yml`** - Docker image builds
-
-### Build Matrix Generation
-
-The CI uses `bin/generate_ci_matrix.py` to dynamically select which targets to build:
-
-```bash
-# Generate full build matrix
-./bin/generate_ci_matrix.py all
-
-# Generate PR-level matrix (subset for faster builds)
-./bin/generate_ci_matrix.py all --level pr
-```
-
-Variants can specify their support level in `platformio.ini`:
-
-- `custom_meshtastic_support_level = 1` - Actively supported, built on every PR
-- `custom_meshtastic_support_level = 2` - Supported, built on merge to main branches
-- `board_level = extra` - Extra builds, only on full releases
-
-### Running Workflows Locally
-
-Most workflows can be triggered manually via `workflow_dispatch` for testing.
-
-## Testing
-
-- Unit tests in `test/` directory
-- Run with `pio test -e native`
-- Use `bin/test-simulator.sh` for simulation testing
-
-## Resources
-
-- [Documentation](https://meshtastic.org/docs/)

.github/workflows/build_debian_src.yml

@@ -64,7 +64,7 @@ jobs:
           PKG_VERSION: ${{ steps.version.outputs.deb }}
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           overwrite: true

.github/workflows/build_firmware.yml

@@ -21,7 +21,7 @@ jobs:
     # Use 'arctastic' self-hosted runner pool when building in the main repo
     runs-on: ${{ github.repository_owner == 'meshtastic' && 'arctastic' || 'ubuntu-latest' }}
     outputs:
-      artifact-id: ${{ steps.upload-firmware.outputs.artifact-id }}
+      artifact-id: ${{ steps.upload.outputs.artifact-id }}
     steps:
       - uses: actions/checkout@v6
         with:
@@ -29,6 +29,23 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
+      - name: Set OTA firmware source and target
+        if: startsWith(inputs.platform, 'esp32')
+        id: ota_dir
+        env:
+          PIO_PLATFORM: ${{ inputs.platform }}
+        run: |
+          if [ "$PIO_PLATFORM" = "esp32s3" ]; then
+            echo "src=firmware-s3.bin" >> $GITHUB_OUTPUT
+            echo "tgt=release/bleota-s3.bin" >> $GITHUB_OUTPUT
+          elif [ "$PIO_PLATFORM" = "esp32c3" ] || [ "$PIO_PLATFORM" = "esp32c6" ]; then
+            echo "src=firmware-c3.bin" >> $GITHUB_OUTPUT
+            echo "tgt=release/bleota-c3.bin" >> $GITHUB_OUTPUT
+          elif [ "$PIO_PLATFORM" = "esp32" ]; then
+            echo "src=firmware.bin" >> $GITHUB_OUTPUT
+            echo "tgt=release/bleota.bin" >> $GITHUB_OUTPUT
+          fi
+
       - name: Build ${{ inputs.platform }}
         id: build
         uses: meshtastic/gh-action-firmware@main
@@ -36,83 +53,23 @@ jobs:
           pio_platform: ${{ inputs.platform }}
           pio_env: ${{ inputs.pio_env }}
           pio_target: build
+          ota_firmware_source: ${{ steps.ota_dir.outputs.src || '' }}
+          ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
 
-      - name: ESP32 - Download Unified OTA firmware
+      - name: Echo manifest from release/firmware-*.mt.json to job summary
-        # Currently only esp32 and esp32s3 use the unified ota
+        if: ${{ always() }}
-        if: inputs.platform == 'esp32' || inputs.platform == 'esp32s3'
-        id: dl-ota-unified
-        env:
-          PIO_PLATFORM: ${{ inputs.platform }}
-          PIO_ENV: ${{ inputs.pio_env }}
-          OTA_URL: https://github.com/meshtastic/esp32-unified-ota/releases/latest/download/mt-${{ inputs.platform }}-ota.bin
-        working-directory: release
-        run: |
-          curl -L -o "mt-$PIO_PLATFORM-ota.bin" $OTA_URL
-
-      - name: ESP32-C* - Download BLE-Only OTA firmware
-        if: inputs.platform == 'esp32c3' || inputs.platform == 'esp32c6'
-        id: dl-ota-ble
-        env:
-          PIO_ENV: ${{ inputs.pio_env }}
-          OTA_URL: https://github.com/meshtastic/firmware-ota/releases/latest/download/firmware-c3.bin
-        working-directory: release
-        run: |
-          curl -L -o bleota-c3.bin $OTA_URL
-
-      - name: Update manifest with OTA file
-        if: inputs.platform == 'esp32' || inputs.platform == 'esp32s3' || inputs.platform == 'esp32c3' || inputs.platform == 'esp32c6'
-        working-directory: release
-        env:
-          PIO_PLATFORM: ${{ inputs.platform }}
-        run: |
-          # Determine OTA filename based on platform
-          if [[ "$PIO_PLATFORM" == "esp32" || "$PIO_PLATFORM" == "esp32s3" ]]; then
-            OTA_FILE="mt-${PIO_PLATFORM}-ota.bin"
-          else
-            OTA_FILE="bleota-c3.bin"
-          fi
-
-          # Check if OTA file exists
-          if [[ ! -f "$OTA_FILE" ]]; then
-            echo "OTA file $OTA_FILE not found, skipping manifest update"
-            exit 0
-          fi
-
-          # Calculate MD5 and size
-          if command -v md5sum &> /dev/null; then
-            OTA_MD5=$(md5sum "$OTA_FILE" | cut -d' ' -f1)
-          else
-            OTA_MD5=$(md5 -q "$OTA_FILE")
-          fi
-          OTA_SIZE=$(stat -f%z "$OTA_FILE" 2>/dev/null || stat -c%s "$OTA_FILE")
-
-          # Find and update manifest file
-          for manifest in firmware-*.mt.json; do
-            if [[ -f "$manifest" ]]; then
-              echo "Updating $manifest with $OTA_FILE (md5: $OTA_MD5, size: $OTA_SIZE)"
-              # Add OTA entry to files array if not already present
-              jq --arg name "$OTA_FILE" --arg md5 "$OTA_MD5" --argjson bytes "$OTA_SIZE" --arg part "app1" \
-                'if .files | map(select(.name == $name)) | length == 0 then .files += [{"name": $name, "md5": $md5, "bytes": $bytes, "part_name": $part}] else . end' \
-                "$manifest" > "${manifest}.tmp" && mv "${manifest}.tmp" "$manifest"
-            fi
-          done
-
-      - name: Job summary
         env:
           PIO_ENV: ${{ inputs.pio_env }}
         run: |
-          echo "## $PIO_ENV" >> $GITHUB_STEP_SUMMARY
+          echo "## Manifest: \`$PIO_ENV\`" >> $GITHUB_STEP_SUMMARY
-          echo "<details><summary><strong>Manifest</strong></summary>" >> $GITHUB_STEP_SUMMARY
-          echo '' >> $GITHUB_STEP_SUMMARY
           echo '```json' >> $GITHUB_STEP_SUMMARY
           cat release/firmware-*.mt.json >> $GITHUB_STEP_SUMMARY
           echo '' >> $GITHUB_STEP_SUMMARY
           echo '```' >> $GITHUB_STEP_SUMMARY
-          echo "</details>" >> $GITHUB_STEP_SUMMARY
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
-        id: upload-firmware
+        id: upload
         with:
           name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
           overwrite: true
@@ -125,12 +82,3 @@ jobs:
             release/*.zip
             release/device-*.sh
             release/device-*.bat
-
-      - name: Store manifests as an artifact
-        uses: actions/upload-artifact@v6
-        id: upload-manifest
-        with:
-          name: manifest-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
-          overwrite: true
-          path: |
-            release/*.mt.json

.github/workflows/build_one_target.yml

@@ -98,7 +98,7 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-*-*
@@ -111,7 +111,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -127,7 +127,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-*-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -146,7 +146,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
           overwrite: true

.github/workflows/first_time_contributor.yml

@@ -1,47 +0,0 @@
-name: Welcome First-Time Contributor
-
-on:
-  issues:
-    types: opened
-  pull_request_target:
-    types: opened
-
-permissions: {}
-
-jobs:
-  welcome:
-    runs-on: ubuntu-latest
-    permissions:
-      issues: write # Required to post comments and labels on issues
-      pull-requests: write # Required to post comments and labels on PRs
-    steps:
-      - uses: plbstl/first-contribution@v4
-        with:
-          labels: first-contribution
-          issue-opened-msg: |
-            ### @{fc-author}, Welcome to Meshtastic! :wave:
-
-            Thanks for opening your first issue. If it's helpful, an easy way
-            to get logs is the "Open Serial Monitor" button on the [Web Flasher](https://flasher.meshtastic.org).
-
-            If you have ideas for features, note that we often debate big ideas
-            in the [discussions tab](https://github.com/meshtastic/firmware/discussions/categories/ideas)
-            first. This tracker tends to be for ideas that have community
-            consensus and a clear implementation.
-
-            We're very active [on discord](https://discord.com/invite/meshtastic),
-            especially the \#firmware and \#alphanauts-testing channels. If you'll
-            be around for a while, we'd love to see you there!
-
-            Welcome to the community! :heart:
-
-          pr-opened-msg: |
-            ### @{fc-author}, Welcome to Meshtastic!
-
-            Thanks for opening your first pull request. We really appreciate it.
-
-            We discuss work as a team in discord, please join us in the [#firmware channel](https://discord.com/invite/meshtastic).
-            There's a big backlog of patches at the moment. If you have time,
-            please help us with some code review and testing of [other PRs](https://github.com/meshtastic/firmware/pulls)!
-
-            Welcome to the team :smile:

.github/workflows/main_matrix.yml

@@ -8,9 +8,7 @@ on:
     branches:
       - master
       - develop
-      - pioarduino # Remove when merged // use `feature/` in the future.
       - event/*
-      - feature/*
     paths-ignore:
       - "**.md"
       - version.properties
@@ -20,9 +18,7 @@ on:
     branches:
       - master
       - develop
-      - pioarduino # Remove when merged // use `feature/` in the future.
       - event/*
-      - feature/*
     paths-ignore:
       - "**.md"
       #- "**.yml"
@@ -81,21 +77,16 @@ jobs:
       fail-fast: false
       matrix:
         check: ${{ fromJson(needs.setup.outputs.check) }}
-    # Use 'arctastic' self-hosted runner pool when checking in the main repo
+
-    runs-on: ${{ github.repository_owner == 'meshtastic' && 'arctastic' || 'ubuntu-latest' }}
+    runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     steps:
       - uses: actions/checkout@v6
-        with:
+      - name: Build base
-          submodules: recursive
+        id: base
-          ref: ${{github.event.pull_request.head.ref}}
+        uses: ./.github/actions/setup-base
-          repository: ${{github.event.pull_request.head.repo.full_name}}
       - name: Check ${{ matrix.check.board }}
-        uses: meshtastic/gh-action-firmware@main
+        run: bin/check-all.sh ${{ matrix.check.board }}
-        with:
-          pio_platform: ${{ matrix.check.platform }}
-          pio_env: ${{ matrix.check.board }}
-          pio_target: check
 
   build:
     needs: [setup, version]
@@ -177,7 +168,7 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -187,7 +178,7 @@ jobs:
         run: ls -R
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -201,11 +192,10 @@ jobs:
             ./device-*.bat
             ./littlefs-*.bin
             ./bleota*bin
-            ./mt-*-ota.bin
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -224,7 +214,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -238,48 +228,6 @@ jobs:
           description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
           github-token: ${{ secrets.GITHUB_TOKEN }}
 
-  shame:
-    if: github.repository == 'meshtastic/firmware'
-    continue-on-error: true
-    runs-on: ubuntu-latest
-    needs: [build]
-    steps:
-      - uses: actions/checkout@v6
-        if: github.event_name == 'pull_request_target'
-        with:
-          filter: blob:none # means we download all the git history but none of the commit (except ones with checkout like the head)
-          fetch-depth: 0
-      - name: Download the current manifests
-        uses: actions/download-artifact@v7
-        with:
-          path: ./manifests-new/
-          pattern: manifest-*
-          merge-multiple: true
-      - name: Upload combined manifests for later commit and global stats crunching.
-        uses: actions/upload-artifact@v6
-        id: upload-manifest
-        with:
-          name: manifests-${{ github.sha }}
-          overwrite: true
-          path: manifests-new/*.mt.json
-      - name: Find the merge base
-        if: github.event_name == 'pull_request_target'
-        run: echo "MERGE_BASE=$(git merge-base "origin/$base" "$head")" >> $GITHUB_ENV
-        env:
-          base: ${{ github.base_ref }}
-          head: ${{ github.sha }}
-      # Currently broken (for-loop through EVERY artifact -- rate limiting)
-      # - name: Download the old manifests
-      #   if: github.event_name == 'pull_request_target'
-      #   run: gh run download -R "$repo" --name "manifests-$merge_base" --dir manifest-old/
-      #   env:
-      #     GH_TOKEN: ${{ github.token }}
-      #     merge_base: ${{ env.MERGE_BASE }}
-      #     repo: ${{ github.repository }}
-      # - name: Do scan and post comment
-      #   if: github.event_name == 'pull_request_target'
-      #   run: python3 bin/shame.py ${{ github.event.pull_request.number }} manifests-old/ manifests-new/
-
   release-artifacts:
     runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
@@ -294,24 +242,6 @@ jobs:
     steps:
       - name: Checkout
         uses: actions/checkout@v6
-        with:
-          fetch-depth: 0
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - name: Generate release notes
-        id: release_notes
-        run: |
-          chmod +x ./bin/generate_release_notes.py
-          NOTES=$(./bin/generate_release_notes.py ${{ needs.version.outputs.long }})
-          echo "notes<<EOF" >> $GITHUB_OUTPUT
-          echo "$NOTES" >> $GITHUB_OUTPUT
-          echo "EOF" >> $GITHUB_OUTPUT
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Create release
         uses: softprops/action-gh-release@v2
@@ -321,17 +251,18 @@ jobs:
           prerelease: true
           name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
           tag_name: v${{ needs.version.outputs.long }}
-          body: ${{ steps.release_notes.outputs.notes }}
+          body: |
+            Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -355,7 +286,7 @@ jobs:
           }' > firmware-${{ needs.version.outputs.long }}.json
 
       - name: Save Release manifest artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: manifest-${{ needs.version.outputs.long }}
           overwrite: true
@@ -396,7 +327,7 @@ jobs:
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -413,7 +344,7 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -445,8 +376,6 @@ jobs:
     steps:
       - name: Checkout
         uses: actions/checkout@v6
-        with:
-          fetch-depth: 0
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -454,25 +383,18 @@ jobs:
           python-version: 3.x
 
       - name: Get firmware artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true
           path: ./publish
 
       - name: Get manifest artifact
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: manifest-${{ needs.version.outputs.long }}
           path: ./publish
 
-      - name: Generate release notes
-        run: |
-          chmod +x ./bin/generate_release_notes.py
-          ./bin/generate_release_notes.py ${{ needs.version.outputs.long }} > ./publish/release_notes.md
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
       - name: Publish firmware to meshtastic.github.io
         uses: peaceiris/actions-gh-pages@v4
         env:

.github/workflows/merge_queue.yml

@@ -147,7 +147,7 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -160,7 +160,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -176,7 +176,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -195,7 +195,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -235,14 +235,14 @@ jobs:
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -292,7 +292,7 @@ jobs:
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -309,7 +309,7 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -347,7 +347,7 @@ jobs:
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true

.github/workflows/models_issue_triage.yml

@@ -1,213 +0,0 @@
-name: Issue Triage (Models)
-
-on:
-  issues:
-    types: [opened]
-
-permissions:
-  issues: write
-  models: read
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.event.issue.number }}
-  cancel-in-progress: true
-
-jobs:
-  triage:
-    if: ${{ github.repository == 'meshtastic/firmware' && github.event.issue.user.type != 'Bot' }}
-    runs-on: ubuntu-latest
-    steps:
-      # ─────────────────────────────────────────────────────────────────────────
-      # Step 1: Quality check (spam/AI-slop detection) - runs first, exits early if spam
-      # ─────────────────────────────────────────────────────────────────────────
-      - name: Detect spam or low-quality content
-        uses: actions/ai-inference@v2
-        id: quality
-        continue-on-error: true
-        with:
-          max-tokens: 20
-          prompt: |
-            Is this GitHub issue spam, AI-generated slop, or low quality?
-
-            Title: ${{ github.event.issue.title }}
-            Body: ${{ github.event.issue.body }}
-
-            Respond with exactly one of: spam, ai-generated, needs-review, ok
-          system-prompt: You detect spam and low-quality contributions. Be conservative - only flag obvious spam or AI slop.
-          model: openai/gpt-4o-mini
-
-      - name: Apply quality label if needed
-        if: steps.quality.outputs.response != '' && steps.quality.outputs.response != 'ok'
-        uses: actions/github-script@v8
-        env:
-          QUALITY_LABEL: ${{ steps.quality.outputs.response }}
-        with:
-          script: |
-            const label = (process.env.QUALITY_LABEL || '').trim().toLowerCase();
-            const labelMeta = {
-              'spam': { color: 'd73a4a', description: 'Possible spam' },
-              'ai-generated': { color: 'fbca04', description: 'Possible AI-generated low-quality content' },
-              'needs-review': { color: 'f9d0c4', description: 'Needs human review' },
-            };
-            const meta = labelMeta[label];
-            if (!meta) return;
-
-            // Ensure label exists
-            try {
-              await github.rest.issues.getLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label });
-            } catch (e) {
-              if (e.status !== 404) throw e;
-              await github.rest.issues.createLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label, color: meta.color, description: meta.description });
-            }
-
-            // Apply label
-            await github.rest.issues.addLabels({ owner: context.repo.owner, repo: context.repo.repo, issue_number: context.payload.issue.number, labels: [label] });
-
-            // Set output to skip remaining steps
-            core.setOutput('is_spam', 'true');
-
-      # ─────────────────────────────────────────────────────────────────────────
-      # Step 2: Duplicate detection - only if not spam
-      # ─────────────────────────────────────────────────────────────────────────
-      - name: Detect duplicate issues
-        if: steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == ''
-        uses: pelikhan/action-genai-issue-dedup@bdb3b5d9451c1090ffcdf123d7447a5e7c7a2528 # v0.0.19
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-
-      # ─────────────────────────────────────────────────────────────────────────
-      # Step 3: Completeness check + auto-labeling (combined into one AI call)
-      # ─────────────────────────────────────────────────────────────────────────
-      - name: Determine if completeness check should be skipped
-        if: steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == ''
-        uses: actions/github-script@v8
-        id: check-skip
-        with:
-          script: |
-            const title = (context.payload.issue.title || '').toLowerCase();
-            const labels = (context.payload.issue.labels || []).map(label => label.name);
-            const hasFeatureRequest = title.includes('feature request');
-            const hasEnhancement = labels.includes('enhancement');
-            const shouldSkip = hasFeatureRequest && hasEnhancement;
-            core.setOutput('should_skip', shouldSkip ? 'true' : 'false');
-
-      - name: Analyze issue completeness and determine labels
-        if: (steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == '') && steps.check-skip.outputs.should_skip != 'true'
-        uses: actions/ai-inference@v2
-        id: analysis
-        continue-on-error: true
-        with:
-          prompt: |
-            Analyze this GitHub issue for completeness and determine if it needs labels.
-
-            IMPORTANT: Distinguish between:
-            - Device/firmware bugs (crashes, reboots, lockups, radio/GPS/display/power issues) - these need device logs
-            - Build/release/packaging issues (missing files, CI failures, download problems) - these do NOT need device logs
-            - Documentation or website issues - these do NOT need device logs
-
-            If this is a device/firmware bug, request device logs and explain how to get them:
-
-            Web Flasher logs:
-            - Go to https://flasher.meshtastic.org
-            - Connect the device via USB and click Connect
-            - Open the device console/log output, reproduce the problem, then copy/download and attach/paste the logs
-
-            Meshtastic CLI logs:
-            - Run: meshtastic --port <serial-port> --noproto
-            - Reproduce the problem, then copy/paste the terminal output
-
-            Also request key context if missing: device model/variant, firmware version, region, steps to reproduce, expected vs actual.
-
-            Respond ONLY with valid JSON (no markdown, no code fences):
-            {"complete": true, "comment": "", "label": "none"}
-            OR
-            {"complete": false, "comment": "Your helpful comment", "label": "needs-logs"}
-
-            Use "needs-logs" ONLY if this is a device/firmware bug AND no logs are attached.
-            Use "needs-info" if basic info like firmware version or steps to reproduce are missing.
-            Use "none" if the issue is complete, is a feature request, or is a build/CI/packaging issue.
-
-            Title: ${{ github.event.issue.title }}
-            Body: ${{ github.event.issue.body }}
-          system-prompt: You are a helpful assistant that triages GitHub issues. Be conservative with labels. Only request device logs for actual device/firmware bugs, not for build/release/CI issues.
-          model: openai/gpt-4o-mini
-
-      - name: Process analysis result
-        if: (steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == '') && steps.check-skip.outputs.should_skip != 'true' && steps.analysis.outputs.response != ''
-        uses: actions/github-script@v8
-        id: process
-        env:
-          AI_RESPONSE: ${{ steps.analysis.outputs.response }}
-        with:
-          script: |
-            let raw = (process.env.AI_RESPONSE || '').trim();
-
-            // Strip markdown code fences if present
-            raw = raw.replace(/^```(?:json)?\s*/i, '').replace(/\s*```$/i, '').trim();
-
-            let complete = true;
-            let comment = '';
-            let label = 'none';
-
-            try {
-              const parsed = JSON.parse(raw);
-              complete = !!parsed.complete;
-              comment = (parsed.comment ?? '').toString().trim();
-              label = (parsed.label ?? 'none').toString().trim().toLowerCase();
-            } catch {
-              // If JSON parse fails, log warning and don't comment (avoid posting raw JSON)
-              console.log('Failed to parse AI response as JSON:', raw);
-              complete = true;
-              comment = '';
-              label = 'none';
-            }
-
-            // Validate label
-            const allowedLabels = new Set(['needs-logs', 'needs-info', 'none']);
-            if (!allowedLabels.has(label)) label = 'none';
-
-            // Only comment if we have a valid parsed comment (not raw JSON)
-            const shouldComment = !complete && comment.length > 0 && !comment.startsWith('{');
-            core.setOutput('should_comment', shouldComment ? 'true' : 'false');
-            core.setOutput('comment_body', comment);
-            core.setOutput('label', label);
-
-      - name: Apply triage label
-        if: steps.process.outputs.label != '' && steps.process.outputs.label != 'none'
-        uses: actions/github-script@v8
-        env:
-          LABEL_NAME: ${{ steps.process.outputs.label }}
-        with:
-          script: |
-            const label = process.env.LABEL_NAME;
-            const labelMeta = {
-              'needs-logs': { color: 'cfd3d7', description: 'Device logs requested for triage' },
-              'needs-info': { color: 'f9d0c4', description: 'More information requested for triage' },
-            };
-            const meta = labelMeta[label];
-            if (!meta) return;
-
-            // Ensure label exists
-            try {
-              await github.rest.issues.getLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label });
-            } catch (e) {
-              if (e.status !== 404) throw e;
-              await github.rest.issues.createLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label, color: meta.color, description: meta.description });
-            }
-
-            // Apply label
-            await github.rest.issues.addLabels({ owner: context.repo.owner, repo: context.repo.repo, issue_number: context.payload.issue.number, labels: [label] });
-
-      - name: Comment on issue
-        if: steps.process.outputs.should_comment == 'true'
-        uses: actions/github-script@v8
-        env:
-          COMMENT_BODY: ${{ steps.process.outputs.comment_body }}
-        with:
-          script: |
-            await github.rest.issues.createComment({
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              issue_number: context.payload.issue.number,
-              body: process.env.COMMENT_BODY
-            });

.github/workflows/models_pr_triage.yml

@@ -1,139 +0,0 @@
-name: PR Triage (Models)
-
-on:
-  pull_request_target:
-    types: [opened]
-
-permissions:
-  pull-requests: write
-  issues: write
-  models: read
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.event.pull_request.number }}
-  cancel-in-progress: true
-
-jobs:
-  triage:
-    if: ${{ github.repository == 'meshtastic/firmware' && github.event.pull_request.user.type != 'Bot' }}
-    runs-on: ubuntu-latest
-    steps:
-      # ─────────────────────────────────────────────────────────────────────────
-      # Step 1: Check if PR already has automation/type labels (skip if so)
-      # ─────────────────────────────────────────────────────────────────────────
-      - name: Check existing labels
-        uses: actions/github-script@v8
-        id: check-labels
-        with:
-          script: |
-            const skipLabels = new Set(['automation']);
-            const typeLabels = new Set(['bugfix', 'hardware-support', 'enhancement', 'dependencies', 'submodules', 'github_actions', 'trunk', 'cleanup']);
-            const prLabels = context.payload.pull_request.labels.map(l => l.name);
-
-            const shouldSkipAll = prLabels.some(l => skipLabels.has(l));
-            const hasTypeLabel = prLabels.some(l => typeLabels.has(l));
-
-            core.setOutput('skip_all', shouldSkipAll ? 'true' : 'false');
-            core.setOutput('has_type_label', hasTypeLabel ? 'true' : 'false');
-
-      # ─────────────────────────────────────────────────────────────────────────
-      # Step 2: Quality check (spam/AI-slop detection)
-      # ─────────────────────────────────────────────────────────────────────────
-      - name: Detect spam or low-quality content
-        if: steps.check-labels.outputs.skip_all != 'true'
-        uses: actions/ai-inference@v2
-        id: quality
-        continue-on-error: true
-        with:
-          max-tokens: 20
-          prompt: |
-            Is this GitHub pull request spam, AI-generated slop, or low quality?
-
-            Title: ${{ github.event.pull_request.title }}
-            Body: ${{ github.event.pull_request.body }}
-
-            Respond with exactly one of: spam, ai-generated, needs-review, ok
-          system-prompt: You detect spam and low-quality contributions. Be conservative - only flag obvious spam or AI slop.
-          model: openai/gpt-4o-mini
-
-      - name: Apply quality label if needed
-        if: steps.check-labels.outputs.skip_all != 'true' && steps.quality.outputs.response != '' && steps.quality.outputs.response != 'ok'
-        uses: actions/github-script@v8
-        id: quality-label
-        env:
-          QUALITY_LABEL: ${{ steps.quality.outputs.response }}
-        with:
-          script: |
-            const label = (process.env.QUALITY_LABEL || '').trim().toLowerCase();
-            const labelMeta = {
-              'spam': { color: 'd73a4a', description: 'Possible spam' },
-              'ai-generated': { color: 'fbca04', description: 'Possible AI-generated low-quality content' },
-              'needs-review': { color: 'f9d0c4', description: 'Needs human review' },
-            };
-            const meta = labelMeta[label];
-            if (!meta) return;
-
-            // Ensure label exists
-            try {
-              await github.rest.issues.getLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label });
-            } catch (e) {
-              if (e.status !== 404) throw e;
-              await github.rest.issues.createLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label, color: meta.color, description: meta.description });
-            }
-
-            // Apply label
-            await github.rest.issues.addLabels({ owner: context.repo.owner, repo: context.repo.repo, issue_number: context.payload.pull_request.number, labels: [label] });
-
-            core.setOutput('is_spam', 'true');
-
-      # ─────────────────────────────────────────────────────────────────────────
-      # Step 3: Auto-label PR type (bugfix/hardware-support/enhancement)
-      # Only skip for spam/ai-generated; still classify needs-review PRs
-      # ─────────────────────────────────────────────────────────────────────────
-      - name: Classify PR for labeling
-        if: steps.check-labels.outputs.skip_all != 'true' && steps.check-labels.outputs.has_type_label != 'true' && steps.quality.outputs.response != 'spam' && steps.quality.outputs.response != 'ai-generated'
-        uses: actions/ai-inference@v2
-        id: classify
-        continue-on-error: true
-        with:
-          max-tokens: 30
-          prompt: |
-            Classify this pull request into exactly one category.
-
-            Return exactly one of: bugfix, hardware-support, enhancement
-
-            Use bugfix if it fixes a bug, crash, or incorrect behavior.
-            Use hardware-support if it adds or improves support for a specific hardware device/variant.
-            Use enhancement if it adds a new feature, improves performance, or refactors code.
-
-            Title: ${{ github.event.pull_request.title }}
-            Body: ${{ github.event.pull_request.body }}
-          system-prompt: You classify pull requests into categories. Be conservative and pick the most appropriate single label.
-          model: openai/gpt-4o-mini
-
-      - name: Apply type label
-        if: steps.check-labels.outputs.skip_all != 'true' && steps.check-labels.outputs.has_type_label != 'true' && steps.classify.outputs.response != ''
-        uses: actions/github-script@v8
-        env:
-          TYPE_LABEL: ${{ steps.classify.outputs.response }}
-        with:
-          script: |
-            const label = (process.env.TYPE_LABEL || '').trim().toLowerCase();
-            const labelMeta = {
-              'bugfix': { color: 'd73a4a', description: 'Bug fix' },
-              'hardware-support': { color: '0e8a16', description: 'Hardware support addition or improvement' },
-              'enhancement': { color: 'a2eeef', description: 'New feature or enhancement' },
-            };
-            const meta = labelMeta[label];
-            if (!meta) return;
-
-            // Ensure label exists
-            try {
-              await github.rest.issues.getLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label });
-            } catch (e) {
-              if (e.status !== 404) throw e;
-              await github.rest.issues.createLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label, color: meta.color, description: meta.description });
-            }
-
-            // Apply label
-            await github.rest.issues.addLabels({ owner: context.repo.owner, repo: context.repo.repo, issue_number: context.payload.pull_request.number, labels: [label] });

.github/workflows/package_obs.yml

@@ -58,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -56,7 +56,7 @@ jobs:
           PLATFORMIO_CORE_DIR: pio/core
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
           overwrite: true

.github/workflows/package_ppa.yml

@@ -60,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/pr_tests.yml

@@ -50,7 +50,7 @@ jobs:
 
       - name: Download test artifacts
         if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}
           merge-multiple: true

.github/workflows/release_channels.yml

@@ -48,37 +48,6 @@ jobs:
         ${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
     secrets: inherit
 
-  publish-release-notes:
-    if: github.event.action == 'published'
-    runs-on: ubuntu-latest
-    steps:
-      - name: Get release version
-        id: version
-        run: |
-          # Extract version from tag (e.g., v2.7.15.567b8ea -> 2.7.15.567b8ea)
-          VERSION=${GITHUB_REF#refs/tags/v}
-          echo "version=$VERSION" >> $GITHUB_OUTPUT
-
-      - name: Get release notes
-        run: |
-          mkdir -p ./publish
-          gh release view ${{ github.event.release.tag_name }} --json body --jq '.body' > ./publish/release_notes.md
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Publish release notes to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: firmware-${{ steps.version.outputs.version }}
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: Release notes for ${{ steps.version.outputs.version }}
-          enable_jekyll: true
-
   # Create a PR to bump version when a release is Published
   bump-version:
     if: github.event.action == 'published'
@@ -133,7 +102,7 @@ jobs:
           PIP_DISABLE_PIP_VERSION_CHECK: 1
 
       - name: Create Bumps pull request
-        uses: peter-evans/create-pull-request@v8
+        uses: peter-evans/create-pull-request@v7
         with:
           base: ${{ github.event.repository.default_branch }}
           branch: create-pull-request/bump-version

.github/workflows/sec_sast_semgrep_cron.yml

@@ -33,7 +33,7 @@ jobs:
 
       # step 3
       - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: report.sarif
           overwrite: true

.github/workflows/test_native.yml

@@ -59,7 +59,7 @@ jobs:
         id: version
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}
@@ -94,7 +94,7 @@ jobs:
 
       - name: Save test results
         if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}
           overwrite: true
@@ -108,7 +108,7 @@ jobs:
           sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}
@@ -137,20 +137,20 @@ jobs:
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.5.0
+        uses: dorny/test-reporter@v2.3.0
         with:
           name: PlatformIO Tests
           path: testreport.xml
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}
           path: code-coverage-report
@@ -163,7 +163,7 @@ jobs:
           genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report
 
       - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: code-coverage-report-${{ steps.version.outputs.long }}
           path: code-coverage-report

.github/workflows/trunk_format_pr.yml

@@ -0,0 +1,51 @@
+name: Run Trunk Fmt on PR Comment
+
+on:
+  issue_comment:
+    types: [created]
+
+permissions: read-all
+
+jobs:
+  trunk-fmt:
+    if: github.event.issue.pull_request != null && contains(github.event.comment.body, 'trunk fmt')
+    runs-on: ubuntu-latest
+    permissions:
+      contents: write
+      pull-requests: write
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Install trunk
+        run: curl https://get.trunk.io -fsSL | bash
+
+      - name: Run Trunk Fmt
+        run: trunk fmt
+
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Commit and push changes
+        run: |
+          git config --global user.name "github-actions[bot]"
+          git config --global user.email "github-actions[bot]@users.noreply.github.com"
+          git add .
+          git commit -m "Add firmware version ${{ steps.version.outputs.long }}"
+          git push
+
+      - name: Comment on PR
+        uses: actions/github-script@v8
+        with:
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+          script: |
+            github.issues.createComment({
+              issue_number: context.issue.number,
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              body: '`trunk fmt` has been run on this PR.'
+            })

.github/workflows/update_protobufs.yml

@@ -16,7 +16,7 @@ jobs:
           submodules: true
 
       - name: Update submodule
-        if: ${{ github.ref == 'refs/heads/master' || github.ref == 'refs/heads/develop' }}
+        if: ${{ github.ref == 'refs/heads/master' }}
         run: |
           git submodule update --remote protobufs
 
@@ -31,7 +31,7 @@ jobs:
           ./bin/regen-protos.sh
 
       - name: Create pull request
-        uses: peter-evans/create-pull-request@v8
+        uses: peter-evans/create-pull-request@v7
         with:
           branch: create-pull-request/update-protobufs
           labels: submodules

.gitignore

@@ -41,15 +41,3 @@ src/mesh/raspihttp/private_key.pem
 
 # Ignore logo (set at build time with platformio-custom.py)
 data/boot/logo.*
-
-# pioarduino platform
-managed_components/*
-arduino-lib-builder*
-dependencies.lock
-idf_component.yml
-CMakeLists.txt
-/sdkconfig.*
-.dummy/*
-
-# PYTHONPATH used by the Nix shell
-.python3

.trunk/trunk.yaml

@@ -8,25 +8,25 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.501
+    - checkov@3.2.495
-    - renovate@43.10.3
+    - renovate@42.30.4
-    - prettier@3.8.1
+    - prettier@3.7.4
-    - trufflehog@3.93.3
+    - trufflehog@3.91.2
-    - yamllint@1.38.0
+    - yamllint@1.37.1
-    - bandit@1.9.3
+    - bandit@1.9.2
-    - trivy@0.69.1
+    - trivy@0.67.2
     - taplo@0.10.0
-    - ruff@0.15.1
+    - ruff@0.14.7
     - isort@7.0.0
-    - markdownlint@0.47.0
+    - markdownlint@0.46.0
-    - oxipng@10.1.0
+    - oxipng@9.1.5
     - svgo@4.0.0
-    - actionlint@1.7.10
+    - actionlint@1.7.9
     - flake8@7.3.0
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@26.1.0
+    - black@25.11.0
     - git-diff-check
     - gitleaks@8.30.0
     - clang-format@16.0.3

Dockerfile

@@ -14,7 +14,7 @@ RUN apt-get update && apt-get install --no-install-recommends -y \
         curl wget g++ zip git ca-certificates pkg-config \
         libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
         libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
-        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev libsdl2-dev \
+        libx11-dev libinput-dev libxkbcommon-x11-dev \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware
@@ -53,7 +53,7 @@ USER root
 RUN apt-get update && apt-get --no-install-recommends -y install \
         libc-bin libc6 libgpiod3 libyaml-cpp0.8 libi2c0 libuv1t64 libusb-1.0-0-dev \
         liborcania2.3 libulfius2.7t64 libssl3t64 \
-        libx11-6 libinput10 libxkbcommon-x11-0 libsdl2-2.0-0 \
+        libx11-6 libinput10 libxkbcommon-x11-0 \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \

SECURITY.md

@@ -4,8 +4,8 @@
 
 | Firmware Version | Supported          |
 | ---------------- | ------------------ |
-| 2.7.x            | :white_check_mark: |
+| 2.6.x            | :white_check_mark: |
-| <= 2.6.x         | :x:                |
+| <= 2.5.x         | :x:                |
 
 ## Reporting a Vulnerability
 

alpine.Dockerfile

@@ -11,7 +11,7 @@ RUN apk --no-cache add \
         bash g++ libstdc++-dev linux-headers zip git ca-certificates libbsd-dev \
         libgpiod-dev yaml-cpp-dev bluez-dev \
         libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
-        libx11-dev libinput-dev libxkbcommon-dev sqlite-dev sdl2-dev \
+        libx11-dev libinput-dev libxkbcommon-dev \
     && rm -rf /var/cache/apk/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware
@@ -42,7 +42,7 @@ USER root
 
 RUN apk --no-cache add \
         shadow libstdc++ libbsd libgpiod yaml-cpp libusb \
-        i2c-tools libuv libx11 libinput libxkbcommon sdl2 \
+        i2c-tools libuv libx11 libinput libxkbcommon \
     && rm -rf /var/cache/apk/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \

bin/build-esp32.sh

@@ -22,7 +22,7 @@ export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 -t mtjson # -v
+pio run --environment $1 # -v
 
 cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
 
@@ -32,10 +32,20 @@ cp $BUILDDIR/$basename.factory.bin $OUTDIR/$basename.factory.bin
 echo "Copying ESP32 update bin file"
 cp $BUILDDIR/$basename.bin $OUTDIR/$basename.bin
 
-echo "Copying Filesystem for ESP32 targets"
+echo "Building Filesystem for ESP32 targets"
+# If you want to build the webui, uncomment the following lines
+# pio run --environment $1 -t buildfs
+# cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$1-$VERSION.bin
+# # Remove webserver files from the filesystem and rebuild
+# ls -l data/static # Diagnostic list of files
+# rm -rf data/static
+pio run --environment $1 -t buildfs --disable-auto-clean
 cp $BUILDDIR/littlefs-$1-$VERSION.bin $OUTDIR/littlefs-$1-$VERSION.bin
 cp bin/device-install.* $OUTDIR/
 cp bin/device-update.* $OUTDIR/
 
-echo "Copying manifest"
+# Generate the manifest file
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true
+echo "Generating Meshtastic manifest"
+TIMEFORMAT="Generated manifest in %E seconds"
+time pio run --environment $1 -t mtjson --silent --disable-auto-clean
+cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/build-nrf52.sh

@@ -21,14 +21,13 @@ rm -f $BUILDDIR/firmware*
 export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
-ota_basename=${basename}-ota
 
-pio run --environment $1 -t mtjson # -v
+pio run --environment $1 # -v
 
 cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
 
 echo "Copying NRF52 dfu (OTA) file"
-cp $BUILDDIR/$basename.zip $OUTDIR/$ota_basename.zip
+cp $BUILDDIR/$basename.zip $OUTDIR/$basename.zip
 
 echo "Copying NRF52 UF2 file"
 cp $BUILDDIR/$basename.uf2 $OUTDIR/$basename.uf2
@@ -48,5 +47,8 @@ if (echo $1 | grep -q "rak4631"); then
 	cp $SRCHEX $OUTDIR/
 fi
 
-echo "Copying manifest"
+# Generate the manifest file
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true
+echo "Generating Meshtastic manifest"
+TIMEFORMAT="Generated manifest in %E seconds"
+time pio run --environment $1 -t mtjson --silent --disable-auto-clean
+cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/build-rp2xx0.sh

@@ -22,12 +22,15 @@ export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 -t mtjson # -v
+pio run --environment $1 # -v
 
 cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
 
 echo "Copying uf2 file"
 cp $BUILDDIR/$basename.uf2 $OUTDIR/$basename.uf2
 
-echo "Copying manifest"
+# Generate the manifest file
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true
+echo "Generating Meshtastic manifest"
+TIMEFORMAT="Generated manifest in %E seconds"
+time pio run --environment $1 -t mtjson --silent --disable-auto-clean
+cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/build-stm32wl.sh

@@ -22,12 +22,15 @@ export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 -t mtjson # -v
+pio run --environment $1 # -v
 
 cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
 
 echo "Copying STM32 bin file"
 cp $BUILDDIR/$basename.bin $OUTDIR/$basename.bin
 
-echo "Copying manifest"
+# Generate the manifest file
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true
+echo "Generating Meshtastic manifest"
+TIMEFORMAT="Generated manifest in %E seconds"
+time pio run --environment $1 -t mtjson --silent --disable-auto-clean
+cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/config-dist.yaml

@@ -105,8 +105,6 @@ Lora:
 
 GPS:
 #  SerialPath: /dev/ttyS0
-#  ExtraPins:
-#    - 22
 
 ### Specify I2C device, or leave blank for none
 
@@ -186,8 +184,6 @@ Input:
 Logging:
   LogLevel: info # debug, info, warn, error
 #  TraceFile: /var/log/meshtasticd.json
-#  JSONFile: /packets.json # File location for JSON output of decoded packets
-#  JSONFilter: position # filter for packets to save to JSON file
 #  AsciiLogs: true     # default if not specified is !isatty() on stdout
 
 Webserver:

bin/config.d/lora-hat-rak-6421-pi-hat.yaml

@@ -1,11 +0,0 @@
-Lora:
-
-  ### RAK13300in Slot 1
-  Module: sx1262
-  IRQ: 22 #IO6
-  Reset: 16 # IO4
-  Busy: 24 # IO5
-  # Ant_sw: 13 # IO3 
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0

bin/config.d/lora-usb-meshstick-1262.yaml

@@ -1,14 +0,0 @@
-Lora:
-  Module: sx1262
-  CS: 0
-  IRQ: 6
-  Reset: 2
-  Busy: 4
-  RXen: 1
-  DIO2_AS_RF_SWITCH: true
-  spidev: ch341
-  DIO3_TCXO_VOLTAGE: true
-#  USB_Serialnum: 12345678
-  USB_PID: 0x5512
-  USB_VID: 0x1A86
-  SX126X_MAX_POWER: 22

bin/config.d/lora-usb-umesh-1262-30dbm.yaml

@@ -1,23 +0,0 @@
-Lora:
-  Module: sx1262
-  CS: 0
-  IRQ: 6
-  Reset: 1
-  Busy: 4
-  RXen: 2
-  DIO2_AS_RF_SWITCH: true
-  spidev: ch341
-  USB_PID: 0x5512
-  USB_VID: 0x1A86
-  DIO3_TCXO_VOLTAGE: true
-#  USB_Serialnum: 12345678
-  SX126X_MAX_POWER: 22
-# Reduce output power to improve EMI
-  NUM_PA_POINTS: 22
-  TX_GAIN_LORA: 12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7
-# Note: This module integrates an additional PA to achieve higher output power.
-# The 'power' parameter here does not represent the actual RF output.
-# TX_GAIN_LORA defines the gain offset applied at each SX1262 input power step (1–22 dBm).
-# Each array element corresponds to the additional gain when that input level is set,
-# The effective RF output is: Pout ≈ Pset + TX_GAIN_LORA[index].
-# Please refer to https://github.com/linser233/uMesh/blob/main/RF_Power.md for detailed information.

bin/config.d/lora-usb-umesh-1268-30dbm.yaml

@@ -1,23 +0,0 @@
-Lora:
-  Module: sx1268
-  CS: 0
-  IRQ: 6
-  Reset: 1
-  Busy: 4
-  RXen: 2
-  DIO2_AS_RF_SWITCH: true
-  spidev: ch341
-  USB_PID: 0x5512
-  USB_VID: 0x1A86
-  DIO3_TCXO_VOLTAGE: true
-#  USB_Serialnum: 12345678
-  SX126X_MAX_POWER: 22
-# Reduce output power to improve EMI
-  NUM_PA_POINTS: 22
-  TX_GAIN_LORA: 12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7
-# Note: This module integrates an additional PA to achieve higher output power.
-# The 'power' parameter here does not represent the actual RF output.
-# TX_GAIN_LORA defines the gain offset applied at each SX1262 input power step (1–22 dBm).
-# Each array element corresponds to the additional gain when that input level is set,
-# The effective RF output is: Pout ≈ Pset + TX_GAIN_LORA[index].
-# Please refer to https://github.com/linser233/uMesh/blob/main/RF_Power.md for detailed information.

bin/device-install.bat

@@ -156,8 +156,16 @@ IF %BPS_RESET% EQU 1 (
 SET "PROGNAME=!FILENAME:.factory.bin=!"
 CALL :LOG_MESSAGE DEBUG "Computed PROGNAME: !PROGNAME!"
 
-@REM Determine OTA filename based on MCU type (unified OTA format)
+IF "__!MCU!__" == "__esp32s3__" (
-SET "OTA_FILENAME=mt-!MCU!-ota.bin"
+    @REM We are working with ESP32-S3
+    SET "OTA_FILENAME=bleota-s3.bin"
+) ELSE IF "__!MCU!__" == "__esp32c3__" (
+    @REM We are working with ESP32-C3
+    SET "OTA_FILENAME=bleota-c3.bin"
+) ELSE (
+    @REM Everything else
+    SET "OTA_FILENAME=bleota.bin"
+)
 CALL :LOG_MESSAGE DEBUG "Set OTA_FILENAME to: !OTA_FILENAME!"
 
 @REM Set SPIFFS filename with "littlefs-" prefix.

bin/device-install.sh

@@ -32,19 +32,6 @@ if ! command -v jq >/dev/null 2>&1; then
     exit 1
 fi
 
-# esptool v5 supports commands with dashes and deprecates commands with
-# underscores. Prior versions only support commands with underscores
-if ${ESPTOOL_CMD} | grep --quiet write-flash
-then
-    ESPTOOL_WRITE_FLASH=write-flash
-    ESPTOOL_ERASE_FLASH=erase-flash
-    ESPTOOL_READ_FLASH_STATUS=read-flash-status
-else
-    ESPTOOL_WRITE_FLASH=write_flash
-    ESPTOOL_ERASE_FLASH=erase_flash
-    ESPTOOL_READ_FLASH_STATUS=read_flash_status
-fi
-
 set -e
 
 # Usage info
@@ -96,7 +83,7 @@ while [ $# -gt 0 ]; do
 done
 
 if [[ $BPS_RESET == true ]]; then
-    $ESPTOOL_CMD --baud $RESET_BAUD --after no_reset ${ESPTOOL_READ_FLASH_STATUS}
+	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
 	exit 0
 fi
 
@@ -131,8 +118,14 @@ if [[ -f "$FILENAME" && "$FILENAME" == *.factory.bin ]]; then
         exit 1
     fi
 
-    # Determine OTA filename based on MCU type (unified OTA format)
+    # Determine OTA filename based on MCU type
-    OTAFILE="mt-${MCU}-ota.bin"
+    if [ "$MCU" == "esp32s3" ]; then
+        OTAFILE=bleota-s3.bin
+    elif [ "$MCU" == "esp32c3" ]; then
+        OTAFILE=bleota-c3.bin
+    else
+        OTAFILE=bleota.bin
+    fi
 
     # Set SPIFFS filename with "littlefs-" prefix.
     SPIFFSFILE="littlefs-${PROGNAME/firmware-/}.bin"
@@ -151,12 +144,12 @@ if [[ -f "$FILENAME" && "$FILENAME" == *.factory.bin ]]; then
     fi
 
     echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-    $ESPTOOL_CMD ${ESPTOOL_ERASE_FLASH}
+    $ESPTOOL_CMD erase-flash
-    $ESPTOOL_CMD ${ESPTOOL_WRITE_FLASH} $FIRMWARE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD write-flash $FIRMWARE_OFFSET "${FILENAME}"
     echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
-    $ESPTOOL_CMD ${ESPTOOL_WRITE_FLASH} $OTA_OFFSET "${OTAFILE}"
+    $ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
     echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
-    $ESPTOOL_CMD ${ESPTOOL_WRITE_FLASH} $OFFSET "${SPIFFSFILE}"
+    $ESPTOOL_CMD write_flash $OFFSET "${SPIFFSFILE}"
 
 else
     show_help

bin/device-update.sh

@@ -20,17 +20,6 @@ else
     exit 1
 fi
 
-# esptool v5 supports commands with dashes and deprecates commands with
-# underscores. Prior versions only support commands with underscores
-if ${ESPTOOL_CMD} | grep --quiet write-flash
-then
-    ESPTOOL_WRITE_FLASH=write-flash
-    ESPTOOL_READ_FLASH_STATUS=read-flash-status
-else
-    ESPTOOL_WRITE_FLASH=write_flash
-    ESPTOOL_READ_FLASH_STATUS=read_flash_status
-fi
-
 # Usage info
 show_help() {
 cat << EOF
@@ -80,7 +69,7 @@ done
 shift "$((OPTIND-1))"
 
 if [ "$CHANGE_MODE" = true ]; then
-    $ESPTOOL_CMD --baud $RESET_BAUD --after no_reset ${ESPTOOL_READ_FLASH_STATUS}
+	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
     exit 0
 fi
 
@@ -91,7 +80,7 @@ fi
 
 if [[ -f "$FILENAME" && "$FILENAME" != *.factory.bin ]]; then
     echo "Trying to flash update ${FILENAME}"
-    $ESPTOOL_CMD --baud $FLASH_BAUD ${ESPTOOL_WRITE_FLASH} $UPDATE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD --baud $FLASH_BAUD write-flash $UPDATE_OFFSET "${FILENAME}"
 else
     show_help
     echo "Invalid file: ${FILENAME}"

bin/generate_release_notes.py

@@ -1,355 +0,0 @@
-#!/usr/bin/env python3
-"""
-Generate release notes from merged PRs on develop and master branches.
-Categorizes PRs into Enhancements and Bug Fixes/Maintenance sections.
-"""
-
-import subprocess
-import re
-import json
-import sys
-from datetime import datetime
-
-
-def get_last_release_tag():
-    """Get the most recent release tag."""
-    result = subprocess.run(
-        ["git", "describe", "--tags", "--abbrev=0"],
-        capture_output=True,
-        text=True,
-        check=True,
-    )
-    return result.stdout.strip()
-
-
-def get_tag_date(tag):
-    """Get the commit date (ISO 8601) of the tag."""
-    result = subprocess.run(
-        ["git", "show", "-s", "--format=%cI", tag],
-        capture_output=True,
-        text=True,
-        check=True,
-    )
-    return result.stdout.strip()
-
-
-def get_merged_prs_since_tag(tag, branch):
-    """Get all merged PRs since the given tag on the specified branch."""
-    # Get commits since tag on the branch - look for PR numbers in parentheses
-    result = subprocess.run(
-        [
-            "git",
-            "log",
-            f"{tag}..origin/{branch}",
-            "--oneline",
-        ],
-        capture_output=True,
-        text=True,
-    )
-
-    prs = []
-    seen_pr_numbers = set()
-
-    for line in result.stdout.strip().split("\n"):
-        if not line:
-            continue
-
-        # Extract PR number from commit message - format: "Title (#1234)"
-        pr_match = re.search(r"\(#(\d+)\)", line)
-        if pr_match:
-            pr_number = pr_match.group(1)
-            if pr_number not in seen_pr_numbers:
-                seen_pr_numbers.add(pr_number)
-                prs.append(pr_number)
-
-    return prs
-
-
-def get_pr_details(pr_number):
-    """Get PR details from GitHub API via gh CLI."""
-    try:
-        result = subprocess.run(
-            [
-                "gh",
-                "pr",
-                "view",
-                pr_number,
-                "--json",
-                "title,author,labels,url",
-            ],
-            capture_output=True,
-            text=True,
-            check=True,
-        )
-        return json.loads(result.stdout)
-    except subprocess.CalledProcessError:
-        return None
-
-
-def should_exclude_pr(pr_details):
-    """Check if PR should be excluded from release notes."""
-    if not pr_details:
-        return True
-
-    title = pr_details.get("title", "").lower()
-
-    # Exclude trunk update PRs
-    if "upgrade trunk" in title or "update trunk" in title or "trunk update" in title:
-        return True
-
-    # Exclude protobuf update PRs
-    if "update protobufs" in title or "update protobuf" in title:
-        return True
-
-    # Exclude automated version bump PRs
-    if "bump release version" in title or "bump version" in title:
-        return True
-
-    return False
-
-
-def is_dependency_update(pr_details):
-    """Check if PR is a dependency/chore update."""
-    if not pr_details:
-        return False
-
-    title = pr_details.get("title", "").lower()
-    author = pr_details.get("author", {}).get("login", "").lower()
-    labels = [label.get("name", "").lower() for label in pr_details.get("labels", [])]
-
-    # Check for renovate or dependabot authors
-    if "renovate" in author or "dependabot" in author:
-        return True
-
-    # Check for chore(deps) pattern
-    if re.match(r"^chore\(deps\):", title):
-        return True
-
-    # Check for digest update patterns
-    if re.match(r".*digest to [a-f0-9]+", title, re.IGNORECASE):
-        return True
-
-    # Check for dependency-related labels
-    dependency_labels = ["dependencies", "deps", "renovate"]
-    if any(dep in label for label in labels for dep in dependency_labels):
-        return True
-
-    return False
-
-
-def is_enhancement(pr_details):
-    """Determine if PR is an enhancement based on labels and title."""
-    labels = [label.get("name", "").lower() for label in pr_details.get("labels", [])]
-
-    # Check labels first
-    enhancement_labels = ["enhancement", "feature", "feat", "new feature"]
-    for label in labels:
-        if any(enh in label for enh in enhancement_labels):
-            return True
-
-    # Check title prefixes
-    title = pr_details.get("title", "")
-    enhancement_prefixes = ["feat:", "feature:", "add:"]
-    title_lower = title.lower()
-    for prefix in enhancement_prefixes:
-        if title_lower.startswith(prefix) or f" {prefix}" in title_lower:
-            return True
-
-    return False
-
-
-def clean_title(title):
-    """Clean up PR title for release notes."""
-    # Remove common prefixes
-    prefixes_to_remove = [
-        r"^fix:\s*",
-        r"^feat:\s*",
-        r"^feature:\s*",
-        r"^bug:\s*",
-        r"^bugfix:\s*",
-        r"^chore:\s*",
-        r"^chore\([^)]+\):\s*",
-        r"^refactor:\s*",
-        r"^docs:\s*",
-        r"^ci:\s*",
-        r"^build:\s*",
-        r"^perf:\s*",
-        r"^style:\s*",
-        r"^test:\s*",
-    ]
-
-    cleaned = title
-    for prefix in prefixes_to_remove:
-        cleaned = re.sub(prefix, "", cleaned, flags=re.IGNORECASE)
-
-    # Ensure first letter is capitalized
-    if cleaned:
-        cleaned = cleaned[0].upper() + cleaned[1:]
-
-    return cleaned.strip()
-
-
-def format_pr_line(pr_details):
-    """Format a PR as a markdown bullet point."""
-    title = clean_title(pr_details.get("title", "Unknown"))
-    author = pr_details.get("author", {}).get("login", "unknown")
-    url = pr_details.get("url", "")
-
-    return f"- {title} by @{author} in {url}"
-
-
-def get_new_contributors(pr_details_list, tag, repo="meshtastic/firmware"):
-    """Find contributors who made their first merged PR before this release.
-
-    GitHub usernames do not necessarily match git commit authors, so we use the
-    GitHub search API via `gh` to see if the user has any merged PRs before the
-    tag date. This mirrors how GitHub's "Generate release notes" feature works.
-    """
-
-    bot_authors = {"github-actions", "renovate", "dependabot", "app/renovate", "app/github-actions", "app/dependabot"}
-
-    new_contributors = []
-    seen_authors = set()
-
-    try:
-        tag_date = get_tag_date(tag)
-    except subprocess.CalledProcessError:
-        print(f"Warning: Could not determine tag date for {tag}; skipping new contributor detection", file=sys.stderr)
-        return []
-
-    for pr in pr_details_list:
-        author = pr.get("author", {}).get("login", "")
-        if not author or author in seen_authors:
-            continue
-
-        # Skip bots
-        if author.lower() in bot_authors or author.startswith("app/"):
-            continue
-
-        seen_authors.add(author)
-
-        try:
-            # Search for merged PRs by this author created before the tag date
-            search_query = f"is:pr author:{author} repo:{repo} closed:<=\"{tag_date}\""
-            search = subprocess.run(
-                [
-                    "gh",
-                    "search",
-                    "issues",
-                    "--json",
-                    "number,mergedAt,createdAt",
-                    "--state",
-                    "closed",
-                    "--limit",
-                    "200",
-                    search_query,
-                ],
-                capture_output=True,
-                text=True,
-            )
-
-            if search.returncode != 0:
-                # If gh fails, be conservative and skip adding to new contributors
-                print(f"Warning: gh search failed for author {author}: {search.stderr.strip()}", file=sys.stderr)
-                continue
-
-            results = json.loads(search.stdout or "[]")
-            # If any merged PR exists before or on tag date, not a new contributor
-            had_prior_pr = any(item.get("mergedAt") for item in results)
-
-            if not had_prior_pr:
-                new_contributors.append((author, pr.get("url", "")))
-
-        except Exception as e:
-            print(f"Warning: Could not check contributor history for {author}: {e}", file=sys.stderr)
-            continue
-
-    return new_contributors
-
-
-def main():
-    if len(sys.argv) < 2:
-        print("Usage: generate_release_notes.py <new_version>", file=sys.stderr)
-        sys.exit(1)
-
-    new_version = sys.argv[1]
-
-    # Get last release tag
-    try:
-        last_tag = get_last_release_tag()
-    except subprocess.CalledProcessError:
-        print("Error: Could not find last release tag", file=sys.stderr)
-        sys.exit(1)
-
-    # Collect PRs from both branches
-    all_pr_numbers = set()
-
-    for branch in ["develop", "master"]:
-        try:
-            prs = get_merged_prs_since_tag(last_tag, branch)
-            all_pr_numbers.update(prs)
-        except Exception as e:
-            print(f"Warning: Could not get PRs from {branch}: {e}", file=sys.stderr)
-
-    # Get details for all PRs
-    enhancements = []
-    bug_fixes = []
-    dependencies = []
-    all_pr_details = []
-
-    for pr_number in sorted(all_pr_numbers, key=int):
-        details = get_pr_details(pr_number)
-        if details and not should_exclude_pr(details):
-            all_pr_details.append(details)
-            if is_dependency_update(details):
-                dependencies.append(details)
-            elif is_enhancement(details):
-                enhancements.append(details)
-            else:
-                bug_fixes.append(details)
-
-    # Generate release notes
-    output = []
-
-    if enhancements:
-        output.append("## 🚀 Enhancements\n")
-        for pr in enhancements:
-            output.append(format_pr_line(pr))
-        output.append("")
-
-    if bug_fixes:
-        output.append("## 🐛 Bug fixes and maintenance\n")
-        for pr in bug_fixes:
-            output.append(format_pr_line(pr))
-        output.append("")
-
-    if dependencies:
-        output.append("## ⚙️ Dependencies\n")
-        for pr in dependencies:
-            output.append(format_pr_line(pr))
-        output.append("")
-
-    # Find new contributors (GitHub-accurate check using merged PRs before tag date)
-    new_contributors = get_new_contributors(all_pr_details, last_tag)
-    if new_contributors:
-        output.append("## New Contributors\n")
-        for author, url in new_contributors:
-            # Find first PR URL for this contributor
-            first_pr_url = url
-            for pr in all_pr_details:
-                if pr.get("author", {}).get("login") == author:
-                    first_pr_url = pr.get("url", url)
-                    break
-            output.append(f"- @{author} made their first contribution in {first_pr_url}")
-        output.append("")
-
-    # Add full changelog link
-    output.append(
-        f"**Full Changelog**: https://github.com/meshtastic/firmware/compare/{last_tag}...v{new_version}"
-    )
-
-    print("\n".join(output))
-
-
-if __name__ == "__main__":
-    main()

bin/meshtasticd-start.sh

@@ -1,32 +0,0 @@
-#!/usr/bin/env sh
-
-INSTANCE=$1
-CONF_DIR="/etc/meshtasticd/config.d"
-VFS_DIR="/var/lib"
-
-# If no instance ID provided, start bare daemon and exit
-echo "no instance ID provided, starting bare meshtasticd service"
-if [ -z "${INSTANCE}" ]; then
-  /usr/bin/meshtasticd
-  exit 0
-fi
-
-# Make VFS dir if it does not exist
-if [ ! -d "${VFS_DIR}/meshtasticd-${INSTANCE}" ]; then
-  echo "vfs for ${INSTANCE} does not exist, creating it."
-  mkdir "${VFS_DIR}/meshtasticd-${INSTANCE}"
-fi
-
-# Abort if config for $INSTANCE does not exist
-if [ ! -f "${CONF_DIR}/config-${INSTANCE}.yaml" ]; then
-  echo "no config for ${INSTANCE} found in ${CONF_DIR}. refusing to start" >&2
-  exit 1
-fi
-
-# Start meshtasticd with instance parameters
-printf "starting meshtasticd-%s..., ${INSTANCE}"
-if /usr/bin/meshtasticd --config="${CONF_DIR}/config-${INSTANCE}.yaml" --fsdir="${VFS_DIR}/meshtasticd-${INSTANCE}"; then
-  echo "ok"
-else
-  echo "failed"
-fi

bin/meshtasticd.service

@@ -1,5 +1,5 @@
 [Unit]
-Description=Meshtastic %i Daemon
+Description=Meshtastic Native Daemon
 After=network-online.target
 StartLimitInterval=200
 StartLimitBurst=5
@@ -9,7 +9,7 @@ AmbientCapabilities=CAP_NET_BIND_SERVICE
 User=meshtasticd
 Group=meshtasticd
 Type=simple
-ExecStart=/usr/bin/meshtasticd-start.sh %i
+ExecStart=/usr/bin/meshtasticd
 Restart=always
 RestartSec=3
 

bin/native-install.sh

@@ -1,7 +1,6 @@
 #!/usr/bin/env bash
 
 cp "release/meshtasticd_linux_$(uname -m)" /usr/bin/meshtasticd
-cp "bin/meshtasticd-start.sh" /usr/bin/meshtasticd-start.sh
 mkdir -p /etc/meshtasticd
 if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
 	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,15 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.20" date="2026-02-11">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.20</url>
-    </release>
-    <release version="2.7.19" date="2026-01-22">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.19</url>
-    </release>
-    <release version="2.7.18" date="2026-01-02">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.18</url>
-    </release>
     <release version="2.7.17" date="2025-11-28">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.17</url>
     </release>

bin/platformio-custom.py

@@ -2,12 +2,11 @@
 # trunk-ignore-all(ruff/F821)
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
-from os.path import join
+from os.path import join, basename, isfile
 import subprocess
 import json
 import re
 from datetime import datetime
-from typing import Dict
 
 from readprops import readProps
 
@@ -15,59 +14,9 @@ Import("env")
 platform = env.PioPlatform()
 progname = env.get("PROGNAME")
 lfsbin = f"{progname.replace('firmware-', 'littlefs-')}.bin"
-manifest_ran = False
-
-def infer_architecture(board_cfg):
-    try:
-        mcu = board_cfg.get("build.mcu") if board_cfg else None
-    except KeyError:
-        mcu = None
-    except Exception:
-        mcu = None
-    if not mcu:
-        return None
-    mcu_l = str(mcu).lower()
-    if "esp32s3" in mcu_l:
-        return "esp32-s3"
-    if "esp32c6" in mcu_l:
-        return "esp32-c6"
-    if "esp32c3" in mcu_l:
-        return "esp32-c3"
-    if "esp32" in mcu_l:
-        return "esp32"
-    if "rp2040" in mcu_l:
-        return "rp2040"
-    if "rp2350" in mcu_l:
-        return "rp2350"
-    if "nrf52" in mcu_l or "nrf52840" in mcu_l:
-        return "nrf52840"
-    if "stm32" in mcu_l:
-        return "stm32"
-    return None
 
 def manifest_gather(source, target, env):
-    global manifest_ran
-    if manifest_ran:
-        return
-    # Skip manifest generation if we cannot determine architecture (host/native builds)
-    board_arch = infer_architecture(env.BoardConfig())
-    if not board_arch:
-        print(f"Skipping mtjson generation for unknown architecture (env={env.get('PIOENV')})")
-        manifest_ran = True
-        return
-    manifest_ran = True
     out = []
-    board_platform = env.BoardConfig().get("platform")
-    board_mcu = env.BoardConfig().get("build.mcu").lower()
-    needs_ota_suffix = board_platform == "nordicnrf52"
-    
-    # Mapping of bin files to their target partition names
-    # Maps the filename pattern to the partition name where it should be flashed
-    partition_map = {
-        f"{progname}.bin": "app0",              # primary application slot (app0 / OTA_0)
-        lfsbin: "spiffs",                        # filesystem image flashed to spiffs
-    }
-    
     check_paths = [
         progname,
         f"{progname}.elf",
@@ -78,62 +27,29 @@ def manifest_gather(source, target, env):
         f"{progname}.uf2",
         f"{progname}.factory.uf2",
         f"{progname}.zip",
-        lfsbin,
+        lfsbin
-        f"mt-{board_mcu}-ota.bin",
-        "bleota-c3.bin"
     ]
     for p in check_paths:
         f = env.File(env.subst(f"$BUILD_DIR/{p}"))
         if f.exists():
-            manifest_name = p
-            if needs_ota_suffix and p == f"{progname}.zip":
-                manifest_name = f"{progname}-ota.zip"
             d = {
-                "name": manifest_name,
+                "name": p,
                 "md5": f.get_content_hash(), # Returns MD5 hash
                 "bytes": f.get_size() # Returns file size in bytes
             }
-            # Add part_name if this file represents a partition that should be flashed
-            if p in partition_map:
-                d["part_name"] = partition_map[p]
             out.append(d)
             print(d)
     manifest_write(out, env)
 
 def manifest_write(files, env):
-    # Defensive: also skip manifest writing if we cannot determine architecture
-    def get_project_option(name):
-        try:
-            return env.GetProjectOption(name)
-        except Exception:
-            return None
-
-    def get_project_option_any(names):
-        for name in names:
-            val = get_project_option(name)
-            if val is not None:
-                return val
-        return None
-
-    def as_bool(val):
-        return str(val).strip().lower() in ("1", "true", "yes", "on")
-
-    def as_int(val):
-        try:
-            return int(str(val), 10)
-        except (TypeError, ValueError):
-            return None
-
-    def as_list(val):
-        return [item.strip() for item in str(val).split(",") if item.strip()]
-
     manifest = {
         "version": verObj["long"],
         "build_epoch": build_epoch,
-        "platformioTarget": env.get("PIOENV"),
+        "board": env.get("PIOENV"),
         "mcu": env.get("BOARD_MCU"),
         "repo": repo_owner,
         "files": files,
+        "part": None,
         "has_mui": False,
         "has_inkhud": False,
     }
@@ -148,51 +64,6 @@ def manifest_write(files, env):
     if "MESHTASTIC_INCLUDE_INKHUD" in env.get("CPPDEFINES", []):
         manifest["has_inkhud"] = True
 
-    pioenv = env.get("PIOENV")
-    device_meta = {}
-    device_meta_fields = [
-        ("hwModel", ["custom_meshtastic_hw_model"], as_int),
-        ("hwModelSlug", ["custom_meshtastic_hw_model_slug"], str),
-        ("architecture", ["custom_meshtastic_architecture"], str),
-        ("activelySupported", ["custom_meshtastic_actively_supported"], as_bool),
-        ("displayName", ["custom_meshtastic_display_name"], str),
-        ("supportLevel", ["custom_meshtastic_support_level"], as_int),
-        ("images", ["custom_meshtastic_images"], as_list),
-        ("tags", ["custom_meshtastic_tags"], as_list),
-        ("requiresDfu", ["custom_meshtastic_requires_dfu"], as_bool),
-        ("partitionScheme", ["custom_meshtastic_partition_scheme"], str),
-        ("url", ["custom_meshtastic_url"], str),
-        ("key", ["custom_meshtastic_key"], str),
-        ("variant", ["custom_meshtastic_variant"], str),
-    ]
-
-
-    for manifest_key, option_keys, caster in device_meta_fields:
-        raw_val = get_project_option_any(option_keys)
-        if raw_val is None:
-            continue
-        parsed = caster(raw_val) if callable(caster) else raw_val
-        if parsed is not None and parsed != "":
-            device_meta[manifest_key] = parsed
-
-    # Determine architecture once; if we can't infer it, skip manifest generation
-    board_arch = device_meta.get("architecture") or infer_architecture(env.BoardConfig())
-    if not board_arch:
-        print(f"Skipping mtjson write for unknown architecture (env={env.get('PIOENV')})")
-        return
-
-    device_meta["architecture"] = board_arch
-
-    # Always set requiresDfu: true for nrf52840 targets
-    if board_arch == "nrf52840":
-        device_meta["requiresDfu"] = True
-
-    device_meta.setdefault("displayName", pioenv)
-    device_meta.setdefault("activelySupported", False)
-
-    if device_meta:
-        manifest.update(device_meta)
-
     # Write the manifest to the build directory
     with open(env.subst("$BUILD_DIR/${PROGNAME}.mt.json"), "w") as f:
         json.dump(manifest, f, indent=2)
@@ -288,42 +159,20 @@ def load_boot_logo(source, target, env):
 
 # Load the boot logo on TFT builds
 if ("HAS_TFT", 1) in env.get("CPPDEFINES", []):
-    env.AddPreAction(f"$BUILD_DIR/{lfsbin}", load_boot_logo)
+    env.AddPreAction('$BUILD_DIR/littlefs.bin', load_boot_logo)
 
-board_arch = infer_architecture(env.BoardConfig())
+# Rename (mv) littlefs.bin to include the PROGNAME
-should_skip_manifest = board_arch is None
+# This ensures the littlefs.bin is named consistently with the firmware
-
+env.AddPostAction('$BUILD_DIR/littlefs.bin', env.VerboseAction(
-# For host/native envs, avoid depending on 'buildprog' (some targets don't define it)
+    f'mv $BUILD_DIR/littlefs.bin $BUILD_DIR/{lfsbin}',
-mtjson_deps = [] if should_skip_manifest else ["buildprog"]
+    f'Renaming littlefs.bin to {lfsbin}'
-if not should_skip_manifest and platform.name == "espressif32":
+))
-    # Build littlefs image as part of mtjson target
-    # Equivalent to `pio run -t buildfs`
-    target_lfs = env.DataToBin(
-        join("$BUILD_DIR", "${ESP32_FS_IMAGE_NAME}"), "$PROJECT_DATA_DIR"
-    )
-    mtjson_deps.append(target_lfs)
-
-if should_skip_manifest:
-    def skip_manifest(source, target, env):
-        print(f"mtjson: skipped for native environment: {env.get('PIOENV')}")
 
 env.AddCustomTarget(
     name="mtjson",
-        dependencies=mtjson_deps,
+    dependencies=None,
-        actions=[skip_manifest],
-        title="Meshtastic Manifest (skipped)",
-        description="mtjson generation is skipped for native environments",
-        always_build=True,
-    )
-else:
-    env.AddCustomTarget(
-        name="mtjson",
-        dependencies=mtjson_deps,
     actions=[manifest_gather],
     title="Meshtastic Manifest",
     description="Generating Meshtastic manifest JSON + Checksums",
     always_build=True,
 )
-
-    # Run manifest generation as part of the default build pipeline for non-native builds.
-    env.Default("mtjson")

bin/platformio-pre.py

@@ -11,9 +11,6 @@ else:
     prefsLoc = env["PROJECT_DIR"] + "/version.properties"
     verObj = readProps(prefsLoc)
     env.Replace(PROGNAME=f"firmware-{env.get('PIOENV')}-{verObj['long']}")
-    env.Replace(ESP32_FS_IMAGE_NAME=f"littlefs-{env.get('PIOENV')}-{verObj['long']}")
 
 # Print the new program name for verification
 print(f"PROGNAME: {env.get('PROGNAME')}")
-if platform.name == "espressif32":
-    print(f"ESP32_FS_IMAGE_NAME: {env.get('ESP32_FS_IMAGE_NAME')}")

bin/readprops.py

@@ -18,9 +18,8 @@ def readProps(prefsLoc):
 
     # Try to find current build SHA if if the workspace is clean.  This could fail if git is not installed
     try:
-        # Pin abbreviation length to keep local builds and CI matching (avoid auto-shortening)
         sha = (
-            subprocess.check_output(["git", "rev-parse", "--short=7", "HEAD"])
+            subprocess.check_output(["git", "rev-parse", "--short", "HEAD"])
             .decode("utf-8")
             .strip()
         )

bin/shame.py

@@ -1,95 +0,0 @@
-import sys
-import os
-import json
-from github import Github
-
-def parseFile(path):
-    with open(path, "r") as f:
-        data = json.loads(f)
-    for file in data["files"]:
-        if file["name"].endswith(".bin"):
-            return file["name"], file["bytes"]
-
-if len(sys.argv) != 4:
-    print(f"expected usage: {sys.argv[0]} <PR number> <path to old-manifests> <path to new-manifests>")
-    sys.exit(1)
-
-pr_number = int(sys.argv[1])
-
-token = os.getenv("GITHUB_TOKEN")
-if not token:
-    raise EnvironmentError("GITHUB_TOKEN not found in environment.")
-
-repo_name = os.getenv("GITHUB_REPOSITORY")  # "owner/repo"
-if not repo_name:
-    raise EnvironmentError("GITHUB_REPOSITORY not found in environment.")
-
-oldFiles = sys.argv[2]
-old = set(os.path.join(oldFiles, f) for f in os.listdir(oldFiles) if os.path.isfile(f))
-newFiles = sys.argv[3]
-new = set(os.path.join(newFiles, f) for f in os.listdir(newFiles) if os.path.isfile(f))
-
-startMarkdown = "# Target Size Changes\n\n"
-markdown = ""
-
-newlyIntroduced = new - old
-if len(newlyIntroduced) > 0:
-    markdown += "## Newly Introduced Targets\n\n"
-    # create a table
-    markdown += "| File | Size |\n"
-    markdown += "| ---- | ---- |\n"
-    for f in newlyIntroduced:
-        name, size = parseFile(f)
-        markdown += f"| `{name}` | {size}b |\n"
-
-# do not log removed targets
-# PRs only run a small subset of builds, so removed targets are not meaningful
-# since they are very likely to just be not ran in PR CI
-
-both = old & new
-degradations = []
-improvements = []
-for f in both:
-    oldName, oldSize = parseFile(f)
-    _, newSize = parseFile(f)
-    if oldSize != newSize:
-        if newSize < oldSize:
-            improvements.append((oldName, oldSize, newSize))
-        else:
-            degradations.append((oldName, oldSize, newSize))
-
-if len(degradations) > 0:
-    markdown += "\n## Degradation\n\n"
-    # create a table
-    markdown += "| File | Difference | Old Size | New Size |\n"
-    markdown += "| ---- | ---------- | -------- | -------- |\n"
-    for oldName, oldSize, newSize in degradations:
-        markdown += f"| `{oldName}` | **{oldSize - newSize}b** | {oldSize}b | {newSize}b |\n"
-
-if len(improvements) > 0:
-    markdown += "\n## Improvement\n\n"
-    # create a table
-    markdown += "| File | Difference | Old Size | New Size |\n"
-    markdown += "| ---- | ---------- | -------- | -------- |\n"
-    for oldName, oldSize, newSize in improvements:
-        markdown += f"| `{oldName}` | **{oldSize - newSize}b** | {oldSize}b | {newSize}b |\n"
-
-if len(markdown) == 0:
-    markdown = "No changes in target sizes detected."
-
-g = Github(token)
-repo = g.get_repo(repo_name)
-pr = repo.get_pull(pr_number)
-
-existing_comment = None
-for comment in pr.get_issue_comments():
-    if comment.body.startswith(startMarkdown):
-        existing_comment = comment
-        break
-
-final_markdown = startMarkdown + markdown
-
-if existing_comment:
-    existing_comment.edit(body=final_markdown)
-else:
-    pr.create_issue_comment(body=final_markdown)

boards/CDEBYTE_EoRa-Hub.json

@@ -1,38 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "partitions": "default.csv",
-      "memory_type": "qio_qspi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi"],
-  "debug": {
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "CDEBYTE_EoRa-Hub",
-  "upload": {
-    "flash_size": "4MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 4194304,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://www.cdebyte.com/products/EoRa-HUB-900TB",
-  "vendor": "CDEBYTE"
-}

boards/ThinkNode-M4.json

@@ -1,53 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_ELECROW_M4 -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
-    ],
-    "usb_product": "elecrow_thinknode_m4",
-    "mcu": "nrf52840",
-    "variant": "ELECROW-ThinkNode-M4",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "ELECROW ThinkNode m4",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://www.elecrow.com/thinknode-m4-power-bank-lora-device-with-meshtastic-lora-tracker-function-powered-by-nrf52840.html",
-  "vendor": "ELECROW"
-}

boards/me25ls01-4y10td.json

@@ -32,8 +32,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
+    "svd_path": "nrf52840.svd"
-    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "Minesemi ME25LS01",

boards/meshlink.json

@@ -33,8 +33,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
+    "svd_path": "nrf52840.svd"
-    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "MeshLink",

boards/minimesh_lite.json

@@ -1,51 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DMINIMESH_LITE -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x8029"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
-    ],
-    "usb_product": "Minimesh Lite",
-    "mcu": "nrf52840",
-    "variant": "dls_Minimesh_Lite",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Minimesh Lite",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["nrfutil", "jlink", "nrfjprog", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://deeplabstudio.com",
-  "vendor": "Deeplab Studio"
-}

boards/ms24sf1.json

@@ -32,8 +32,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
+    "svd_path": "nrf52840.svd"
-    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "MINEWSEMI_MS24SF1_SX1262",

boards/nano-g2-ultra.json

@@ -32,8 +32,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
+    "svd_path": "nrf52840.svd"
-    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "BQ nRF52840",

boards/promicro-nrf52840.json

@@ -33,8 +33,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
+    "svd_path": "nrf52840.svd"
-    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "ProMicro compatible nRF52840",

boards/t-beam-1w.json

@@ -1,39 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DLILYGO_TBEAM_1W",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "psram_type": "opi",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "t-beam-1w"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino"],
-  "name": "LilyGo TBeam-1W",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 16777216,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "http://www.lilygo.cn/",
-  "vendor": "LilyGo"
-}

boards/t-watch-s3.json

@@ -9,7 +9,7 @@
       "-DBOARD_HAS_PSRAM",
       "-DT_WATCH_S3",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/tracker-t1000-e.json

@@ -33,8 +33,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
+    "svd_path": "nrf52840.svd"
-    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "Seeed T1000-E",

boards/wio-sdk-wm1110.json

@@ -25,8 +25,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
+    "svd_path": "nrf52840.svd"
-    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino", "freertos"],
   "name": "Seeed WIO WM1110",

boards/wio-t1000-s.json

@@ -32,8 +32,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
+    "svd_path": "nrf52840.svd"
-    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "Seeed WIO WM1110",

boards/wio-tracker-wm1110.json

@@ -32,8 +32,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
+    "svd_path": "nrf52840.svd"
-    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "Seeed WIO WM1110",

debian/changelog

@@ -1,21 +1,3 @@
-meshtasticd (2.7.20.0) unstable; urgency=medium
-
-  * Version 2.7.20
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Wed, 11 Feb 2026 12:19:54 +0000
-
-meshtasticd (2.7.19.0) unstable; urgency=medium
-
-  * Version 2.7.19
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Thu, 22 Jan 2026 22:17:40 +0000
-
-meshtasticd (2.7.18.0) unstable; urgency=medium
-
-  * Version 2.7.18
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Fri, 02 Jan 2026 12:45:36 +0000
-
 meshtasticd (2.7.17.0) unstable; urgency=medium
 
   * Version 2.7.17

debian/control

@@ -25,9 +25,7 @@ Build-Depends: debhelper-compat (= 13),
                liborcania-dev,
                libx11-dev,
                libinput-dev,
-               libxkbcommon-x11-dev,
+               libxkbcommon-x11-dev
-               libsqlite3-dev,
-               libsdl2-dev
 Standards-Version: 4.6.2
 Homepage: https://github.com/meshtastic/firmware
 Rules-Requires-Root: no

debian/meshtasticd.install

@@ -4,6 +4,5 @@ bin/config.yaml                    etc/meshtasticd
 bin/config.d/*                     etc/meshtasticd/available.d
 
 bin/meshtasticd.service            lib/systemd/system
-bin/meshtasticd-start.sh           usr/bin
 
 web/*                              usr/share/meshtasticd/web

extra_scripts/esp32_extra.py

@@ -10,12 +10,6 @@ Import("env")
 platform = env.PioPlatform()
 
 sys.path.append(join(platform.get_package_dir("tool-esptoolpy")))
-# IntelHex workaround, remove after fixed upstream
-# https://github.com/platformio/platform-espressif32/issues/1632
-try:
-    import intelhex
-except ImportError:
-    env.Execute("$PYTHONEXE -m pip install intelhex")
 import esptool
 
 

flake.lock

@@ -1,44 +0,0 @@
-{
-  "nodes": {
-    "flake-compat": {
-      "flake": false,
-      "locked": {
-        "lastModified": 1767039857,
-        "narHash": "sha256-vNpUSpF5Nuw8xvDLj2KCwwksIbjua2LZCqhV1LNRDns=",
-        "owner": "NixOS",
-        "repo": "flake-compat",
-        "rev": "5edf11c44bc78a0d334f6334cdaf7d60d732daab",
-        "type": "github"
-      },
-      "original": {
-        "owner": "NixOS",
-        "repo": "flake-compat",
-        "type": "github"
-      }
-    },
-    "nixpkgs": {
-      "locked": {
-        "lastModified": 1766314097,
-        "narHash": "sha256-laJftWbghBehazn/zxVJ8NdENVgjccsWAdAqKXhErrM=",
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "306ea70f9eb0fb4e040f8540e2deab32ed7e2055",
-        "type": "github"
-      },
-      "original": {
-        "owner": "NixOS",
-        "ref": "nixpkgs-unstable",
-        "repo": "nixpkgs",
-        "type": "github"
-      }
-    },
-    "root": {
-      "inputs": {
-        "flake-compat": "flake-compat",
-        "nixpkgs": "nixpkgs"
-      }
-    }
-  },
-  "root": "root",
-  "version": 7
-}

flake.nix

@@ -1,66 +0,0 @@
-{
-  description = "Nix flake to compile Meshtastic firmware";
-
-  inputs = {
-    nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
-
-    # Shim to make flake.nix work with stable Nix.
-    flake-compat = {
-      url = "github:NixOS/flake-compat";
-      flake = false;
-    };
-  };
-
-  outputs =
-    inputs:
-    let
-      lib = inputs.nixpkgs.lib;
-
-      forAllSystems =
-        fn:
-        lib.genAttrs lib.systems.flakeExposed (
-          system:
-          fn {
-            pkgs = import inputs.nixpkgs {
-              inherit system;
-            };
-            inherit system;
-          }
-        );
-    in
-    {
-      devShells = forAllSystems (
-        { pkgs, ... }:
-        let
-          python3 = pkgs.python312.withPackages (
-            ps: with ps; [
-              google
-            ]
-          );
-        in
-        {
-          default = pkgs.mkShell {
-            buildInputs = with pkgs; [
-              python3
-              platformio
-            ];
-
-            shellHook = ''
-              # Set up PlatformIO to use a local core directory.
-              export PLATFORMIO_CORE_DIR=$PWD/.platformio
-              # Tell pip to put packages into $PIP_PREFIX instead of the usual
-              # location. This is especially necessary under NixOS to avoid having
-              # pip trying to write to the read-only Nix store. For more info,
-              # see https://wiki.nixos.org/wiki/Python
-              export PIP_PREFIX=$PWD/.python3
-              export PYTHONPATH="$PIP_PREFIX/${python3.sitePackages}"
-              export PATH="$PIP_PREFIX/bin:$PATH"
-              # Avoids reproducibility issues with some Python packages
-              # See https://nixos.org/manual/nixpkgs/stable/#python-setup.py-bdist_wheel-cannot-create-.whl
-              unset SOURCE_DATE_EPOCH
-            '';
-          };
-        }
-      );
-    };
-}

meshtasticd.spec.rpkg

@@ -39,7 +39,6 @@ BuildRequires: pkgconfig(bluez)
 BuildRequires: pkgconfig(libusb-1.0)
 BuildRequires: libi2c-devel
 BuildRequires: pkgconfig(libuv)
-BuildRequires: pkgconfig(sqlite3)
 # Web components:
 BuildRequires: pkgconfig(openssl)
 BuildRequires: pkgconfig(liborcania)
@@ -49,7 +48,6 @@ BuildRequires: pkgconfig(libulfius)
 BuildRequires: pkgconfig(x11)
 BuildRequires: pkgconfig(libinput)
 BuildRequires: pkgconfig(xkbcommon-x11)
-BuildRequires: pkgconfig(sdl2)
 
 # libbsd is needed on older Fedora/RHEL to provide 'strlcpy'
 %if 0%{?fedora} >= 39 || 0%{?rhel} >= 10
@@ -60,14 +58,8 @@ BuildRequires: pkgconfig(libbsd-overlay)
 
 Requires:      systemd-udev
 
-# Declare that this package provides the user/group it creates in %pre
-# Required for Fedora 43+ which tracks users/groups as RPM dependencies
-Provides:      user(%{meshtasticd_user})
-Provides:      group(%{meshtasticd_user})
-Provides:      group(spi)
-
 %description
-Meshtastic daemon. Meshtastic is an off-grid
+Meshtastic daemon for controlling Meshtastic devices. Meshtastic is an off-grid
 text communication platform that uses inexpensive LoRa radios.
 
 %prep
@@ -103,9 +95,6 @@ cp -r bin/config.d/* %{buildroot}%{_sysconfdir}/meshtasticd/available.d
 # Install systemd service
 install -D -m 0644 bin/meshtasticd.service %{buildroot}%{_unitdir}/meshtasticd.service
 
-# Install meshtasticd start wrapper
-install -D -m 0755 bin/meshtasticd-start.sh %{buildroot}%{_bindir}/meshtasticd-start.sh
-
 # Install the web files under /usr/share/meshtasticd/web
 mkdir -p %{buildroot}%{_datadir}/meshtasticd/web
 cp -r web/* %{buildroot}%{_datadir}/meshtasticd/web
@@ -158,7 +147,6 @@ fi
 %license LICENSE
 %doc README.md
 %{_bindir}/meshtasticd
-%{_bindir}/meshtasticd-start.sh
 %dir %{_localstatedir}/lib/meshtasticd
 %{_udevrulesdir}/99-meshtasticd-udev.rules
 %dir %{_sysconfdir}/meshtasticd

monitor/filter_c3_exception_decoder.py

@@ -43,11 +43,13 @@ class Esp32C3ExceptionDecoder(DeviceMonitorFilterBase):
         self.enabled = self.setup_paths()
 
         if self.config.get("env:" + self.environment, "build_type") != "debug":
-            print("""
+            print(
+                """
 Please build project in debug configuration to get more details about an exception.
 See https://docs.platformio.org/page/projectconf/build_configurations.html
 
-""")
+"""
+            )
 
         return self
 

oled-emulator/.gitignore

@@ -1,30 +0,0 @@
-# Dependencies
-node_modules/
-
-# Build output
-dist/
-
-# Vite cache
-.vite/
-
-# TypeScript cache
-*.tsbuildinfo
-
-# IDE
-.idea/
-.vscode/
-*.swp
-*.swo
-
-# OS
-.DS_Store
-Thumbs.db
-
-# Logs
-*.log
-npm-debug.log*
-
-# Local env files
-.env
-.env.local
-.env.*.local

oled-emulator/README.md

@@ -1,149 +0,0 @@
-# Meshtastic OLED Emulator
-
-A Vue.js component and TypeScript library for emulating SSD1306/SH1106 OLED displays used in Meshtastic devices. This allows firmware UI development and testing directly in the browser.
-
-## Features
-
-- **Same API as firmware**: Uses the same `OLEDDisplay` API as esp8266-oled-ssd1306 library
-- **Multiple display sizes**: 128x64, 128x32, 64x48, 128x128
-- **Realistic rendering**: Pixel glow, OLED color tints (blue, white, yellow/blue dual)
-- **XBM image support**: Render firmware icons and images
-- **Font rendering**: Bitmap font support with text alignment
-- **Vue 3 component**: Easy integration with Vue applications
-
-## Installation
-
-```bash
-npm install @meshtastic/oled-emulator
-```
-
-## Quick Start
-
-```vue
-<script setup lang="ts">
-import { ref, onMounted } from "vue";
-import {
-  OLEDDisplay,
-  OLEDEmulator,
-  ArialMT_Plain_10,
-} from "@meshtastic/oled-emulator";
-
-// Create display matching firmware
-const display = ref(new OLEDDisplay("128x64"));
-
-onMounted(() => {
-  display.value.setFont(ArialMT_Plain_10);
-  display.value.clear();
-  display.value.drawString(10, 10, "Hello Mesh!");
-  display.value.drawRect(5, 5, 118, 54);
-  display.value.fillCircle(64, 32, 15);
-});
-</script>
-
-<template>
-  <OLEDEmulator
-    :display="display"
-    :pixel-scale="4"
-    preset="ssd1306-blue"
-    :enable-glow="true"
-  />
-</template>
-```
-
-## OLEDDisplay API
-
-The `OLEDDisplay` class provides the same methods as the firmware's display library:
-
-```typescript
-const display = new OLEDDisplay("128x64");
-
-// Basic drawing
-display.clear();
-display.setPixel(x, y);
-display.drawLine(x0, y0, x1, y1);
-display.drawRect(x, y, width, height);
-display.fillRect(x, y, width, height);
-display.drawCircle(x, y, radius);
-display.fillCircle(x, y, radius);
-
-// Text
-display.setFont(ArialMT_Plain_10);
-display.setTextAlignment("TEXT_ALIGN_CENTER");
-display.drawString(x, y, "Hello");
-display.drawStringMaxWidth(x, y, maxWidth, "Long text...");
-const width = display.getStringWidth("text");
-
-// Images (XBM format)
-display.drawXbm(x, y, width, height, imageData);
-
-// Colors
-display.setColor("WHITE"); // or 'BLACK', 'INVERSE'
-
-// Buffer access (for custom rendering)
-const buffer = display.getBuffer(); // Uint8Array
-```
-
-## Display Presets
-
-The emulator includes several realistic display presets:
-
-| Preset                | Description                     |
-| --------------------- | ------------------------------- |
-| `ssd1306-blue`        | Classic blue OLED (default)     |
-| `ssd1306-white`       | White OLED                      |
-| `ssd1306-yellow-blue` | Dual-color (top 16 rows yellow) |
-| `sh1106`              | SH1106 style                    |
-| `sh1107`              | SH1107 128x128                  |
-| `ssd1306-64x48`       | Small 64x48 display             |
-| `ssd1306-128x32`      | Wide 128x32 display             |
-
-## Screen Renderers
-
-Pre-built screen renderers matching firmware UI:
-
-```typescript
-import { ScreenRenderers } from "@meshtastic/oled-emulator";
-
-// Boot screen
-ScreenRenderers.drawBootScreen(display, "2.5.0");
-
-// Node info screen
-ScreenRenderers.drawNodeInfoScreen(display, {
-  shortName: "MESH",
-  longName: "My Node",
-  nodeId: "!abcd1234",
-  lastHeard: "2m ago",
-  snr: 12.5,
-});
-
-// Message screen
-ScreenRenderers.drawMessageScreen(display, {
-  from: "Alice",
-  text: "Hello from the mesh!",
-  time: "14:32",
-  channel: "LongFast",
-});
-
-// And more: drawGPSScreen, drawNodeListScreen, drawSystemScreen, drawCompassScreen
-```
-
-## Development
-
-```bash
-# Install dependencies
-npm install
-
-# Run development server
-npm run dev
-
-# Build library
-npm run build
-```
-
-## Future: Protocol Bridge
-
-A future enhancement will allow connecting this emulator to a real Meshtastic firmware instance (running on native/portduino), enabling live framebuffer streaming over WebSocket for real-time display mirroring.
-
-## License
-
-GPL-3.0 - Same as Meshtastic firmware

oled-emulator/index.html

@@ -1,22 +0,0 @@
-<!doctype html>
-<html lang="en">
-  <head>
-    <meta charset="UTF-8" />
-    <meta name="viewport" content="width=device-width, initial-scale=1.0" />
-    <title>Meshtastic OLED Emulator</title>
-    <style>
-      * {
-        margin: 0;
-        padding: 0;
-        box-sizing: border-box;
-      }
-      body {
-        background: #121212;
-      }
-    </style>
-  </head>
-  <body>
-    <div id="app"></div>
-    <script type="module" src="/src/main.ts"></script>
-  </body>
-</html>

oled-emulator/package.json

@@ -1,54 +0,0 @@
-{
-  "name": "@meshtastic/oled-emulator",
-  "version": "0.1.0",
-  "description": "Vue.js OLED display emulator for Meshtastic firmware UI development",
-  "keywords": [
-    "meshtastic",
-    "oled",
-    "ssd1306",
-    "sh1106",
-    "display",
-    "emulator",
-    "vue",
-    "vue3"
-  ],
-  "author": "Meshtastic",
-  "license": "GPL-3.0",
-  "repository": {
-    "type": "git",
-    "url": "https://github.com/meshtastic/firmware.git",
-    "directory": "oled-emulator"
-  },
-  "main": "./dist/index.js",
-  "module": "./dist/index.mjs",
-  "types": "./dist/index.d.ts",
-  "exports": {
-    ".": {
-      "import": "./dist/index.mjs",
-      "require": "./dist/index.js",
-      "types": "./dist/index.d.ts"
-    },
-    "./style.css": "./dist/style.css"
-  },
-  "files": [
-    "dist",
-    "src"
-  ],
-  "scripts": {
-    "dev": "vite",
-    "build": "vue-tsc && vite build",
-    "preview": "vite preview",
-    "type-check": "vue-tsc --noEmit"
-  },
-  "peerDependencies": {
-    "vue": "^3.3.0"
-  },
-  "devDependencies": {
-    "@vitejs/plugin-vue": "^5.0.0",
-    "typescript": "^5.3.0",
-    "vite": "^5.0.0",
-    "vite-plugin-dts": "^3.7.0",
-    "vue": "^3.4.0",
-    "vue-tsc": "^2.0.0"
-  }
-}

oled-emulator/src/DisplayPresets.ts

@@ -1,82 +0,0 @@
-/**
- * DisplayPresets.ts - OLED display presets for emulator
- */
-
-import type { OLEDDISPLAY_GEOMETRY } from "./OLEDDisplay";
-
-// Display type presets with realistic OLED colors
-export interface DisplayPreset {
-  name: string;
-  geometry: OLEDDISPLAY_GEOMETRY;
-  pixelOn: { r: number; g: number; b: number };
-  pixelOff: { r: number; g: number; b: number };
-  glow: number;
-  contrast: number;
-}
-
-export const DISPLAY_PRESETS: Record<string, DisplayPreset> = {
-  // Classic blue OLED (SSD1306)
-  "ssd1306-blue": {
-    name: "SSD1306 Blue",
-    geometry: "128x64",
-    pixelOn: { r: 100, g: 180, b: 255 },
-    pixelOff: { r: 2, g: 3, b: 8 },
-    glow: 0.4,
-    contrast: 1.0,
-  },
-  // White OLED (SSD1306)
-  "ssd1306-white": {
-    name: "SSD1306 White",
-    geometry: "128x64",
-    pixelOn: { r: 255, g: 255, b: 245 },
-    pixelOff: { r: 5, g: 5, b: 5 },
-    glow: 0.3,
-    contrast: 1.0,
-  },
-  // Yellow-blue dual color OLED
-  "ssd1306-yellow-blue": {
-    name: "SSD1306 Yellow/Blue",
-    geometry: "128x64",
-    // Yellow section is top 16 rows, blue is rest
-    pixelOn: { r: 255, g: 220, b: 50 }, // Will be overridden per-pixel
-    pixelOff: { r: 3, g: 3, b: 5 },
-    glow: 0.35,
-    contrast: 1.0,
-  },
-  // SH1106 (slightly different characteristics)
-  sh1106: {
-    name: "SH1106",
-    geometry: "128x64",
-    pixelOn: { r: 120, g: 200, b: 255 },
-    pixelOff: { r: 2, g: 2, b: 6 },
-    glow: 0.45,
-    contrast: 0.95,
-  },
-  // SH1107 128x128
-  sh1107: {
-    name: "SH1107 128x128",
-    geometry: "128x128",
-    pixelOn: { r: 255, g: 255, b: 240 },
-    pixelOff: { r: 4, g: 4, b: 6 },
-    glow: 0.3,
-    contrast: 1.0,
-  },
-  // Small 64x48 OLED
-  "ssd1306-64x48": {
-    name: "SSD1306 64x48",
-    geometry: "64x48",
-    pixelOn: { r: 100, g: 180, b: 255 },
-    pixelOff: { r: 2, g: 3, b: 8 },
-    glow: 0.4,
-    contrast: 1.0,
-  },
-  // Mini 128x32
-  "ssd1306-128x32": {
-    name: "SSD1306 128x32",
-    geometry: "128x32",
-    pixelOn: { r: 100, g: 180, b: 255 },
-    pixelOff: { r: 2, g: 3, b: 8 },
-    glow: 0.4,
-    contrast: 1.0,
-  },
-};

oled-emulator/src/OLEDDisplay.ts

@@ -1,557 +0,0 @@
-/**
- * OLEDDisplay.ts - TypeScript port of esp8266-oled-ssd1306 OLEDDisplay API
- *
- * This provides the same drawing API as the firmware uses, allowing
- * Meshtastic screen rendering code to be ported to the web.
- *
- * Buffer format: Vertical byte packing (8 vertical pixels per byte)
- * Same as SSD1306/SH1106 native format.
- */
-
-export type OLEDDISPLAY_GEOMETRY =
-  | "128x64"
-  | "128x32"
-  | "64x48"
-  | "64x32"
-  | "128x128"
-  | "96x16";
-
-export type OLEDDISPLAY_COLOR = "WHITE" | "BLACK" | "INVERSE";
-
-export type OLEDDISPLAY_TEXT_ALIGNMENT =
-  | "TEXT_ALIGN_LEFT"
-  | "TEXT_ALIGN_CENTER"
-  | "TEXT_ALIGN_RIGHT";
-
-export interface OLEDFont {
-  height: number;
-  firstChar: number;
-  charCount: number;
-  widths: number[];
-  data: Uint8Array;
-}
-
-// Resolution info based on geometry
-const GEOMETRY_SIZES: Record<
-  OLEDDISPLAY_GEOMETRY,
-  { width: number; height: number }
-> = {
-  "128x64": { width: 128, height: 64 },
-  "128x32": { width: 128, height: 32 },
-  "64x48": { width: 64, height: 48 },
-  "64x32": { width: 64, height: 32 },
-  "128x128": { width: 128, height: 128 },
-  "96x16": { width: 96, height: 16 },
-};
-
-export class OLEDDisplay {
-  private buffer: Uint8Array;
-  private _width: number;
-  private _height: number;
-  private color: OLEDDISPLAY_COLOR = "WHITE";
-  private textAlignment: OLEDDISPLAY_TEXT_ALIGNMENT = "TEXT_ALIGN_LEFT";
-  private font: OLEDFont | null = null;
-
-  constructor(geometry: OLEDDISPLAY_GEOMETRY = "128x64") {
-    const size = GEOMETRY_SIZES[geometry];
-    this._width = size.width;
-    this._height = size.height;
-    // Buffer size: width * (height / 8) - vertical byte packing
-    this.buffer = new Uint8Array((this._width * this._height) / 8);
-  }
-
-  get width(): number {
-    return this._width;
-  }
-
-  get height(): number {
-    return this._height;
-  }
-
-  getWidth(): number {
-    return this._width;
-  }
-
-  getHeight(): number {
-    return this._height;
-  }
-
-  /**
-   * Get the raw framebuffer (vertical byte packing format)
-   */
-  getBuffer(): Uint8Array {
-    return this.buffer;
-  }
-
-  getBufferSize(): number {
-    return this.buffer.length;
-  }
-
-  /**
-   * Clear the display buffer
-   */
-  clear(): void {
-    this.buffer.fill(0);
-  }
-
-  /**
-   * Set the drawing color
-   */
-  setColor(color: OLEDDISPLAY_COLOR): void {
-    this.color = color;
-  }
-
-  /**
-   * Set text alignment for drawString
-   */
-  setTextAlignment(align: OLEDDISPLAY_TEXT_ALIGNMENT): void {
-    this.textAlignment = align;
-  }
-
-  /**
-   * Set the current font
-   */
-  setFont(font: OLEDFont): void {
-    this.font = font;
-  }
-
-  /**
-   * Set a single pixel
-   */
-  setPixel(x: number, y: number): void {
-    if (x < 0 || x >= this._width || y < 0 || y >= this._height) return;
-
-    // Vertical byte packing: each byte represents 8 vertical pixels
-    const byteIndex = x + Math.floor(y / 8) * this._width;
-    const bitMask = 1 << (y & 7);
-
-    switch (this.color) {
-      case "WHITE":
-        this.buffer[byteIndex] |= bitMask;
-        break;
-      case "BLACK":
-        this.buffer[byteIndex] &= ~bitMask;
-        break;
-      case "INVERSE":
-        this.buffer[byteIndex] ^= bitMask;
-        break;
-    }
-  }
-
-  /**
-   * Clear a single pixel (set to black)
-   */
-  clearPixel(x: number, y: number): void {
-    if (x < 0 || x >= this._width || y < 0 || y >= this._height) return;
-    const byteIndex = x + Math.floor(y / 8) * this._width;
-    const bitMask = 1 << (y & 7);
-    this.buffer[byteIndex] &= ~bitMask;
-  }
-
-  /**
-   * Get a pixel value (true = on, false = off)
-   */
-  getPixel(x: number, y: number): boolean {
-    if (x < 0 || x >= this._width || y < 0 || y >= this._height) return false;
-    const byteIndex = x + Math.floor(y / 8) * this._width;
-    const bitMask = 1 << (y & 7);
-    return (this.buffer[byteIndex] & bitMask) !== 0;
-  }
-
-  /**
-   * Draw a line using Bresenham's algorithm
-   */
-  drawLine(x0: number, y0: number, x1: number, y1: number): void {
-    const dx = Math.abs(x1 - x0);
-    const dy = Math.abs(y1 - y0);
-    const sx = x0 < x1 ? 1 : -1;
-    const sy = y0 < y1 ? 1 : -1;
-    let err = dx - dy;
-
-    while (true) {
-      this.setPixel(x0, y0);
-      if (x0 === x1 && y0 === y1) break;
-      const e2 = 2 * err;
-      if (e2 > -dy) {
-        err -= dy;
-        x0 += sx;
-      }
-      if (e2 < dx) {
-        err += dx;
-        y0 += sy;
-      }
-    }
-  }
-
-  /**
-   * Draw horizontal line (optimized)
-   */
-  drawHorizontalLine(x: number, y: number, length: number): void {
-    if (y < 0 || y >= this._height) return;
-    for (let i = 0; i < length; i++) {
-      this.setPixel(x + i, y);
-    }
-  }
-
-  /**
-   * Draw vertical line (optimized)
-   */
-  drawVerticalLine(x: number, y: number, length: number): void {
-    if (x < 0 || x >= this._width) return;
-    for (let i = 0; i < length; i++) {
-      this.setPixel(x, y + i);
-    }
-  }
-
-  /**
-   * Draw a rectangle outline
-   */
-  drawRect(x: number, y: number, width: number, height: number): void {
-    this.drawHorizontalLine(x, y, width);
-    this.drawHorizontalLine(x, y + height - 1, width);
-    this.drawVerticalLine(x, y, height);
-    this.drawVerticalLine(x + width - 1, y, height);
-  }
-
-  /**
-   * Draw a filled rectangle
-   */
-  fillRect(x: number, y: number, width: number, height: number): void {
-    for (let i = 0; i < width; i++) {
-      for (let j = 0; j < height; j++) {
-        this.setPixel(x + i, y + j);
-      }
-    }
-  }
-
-  /**
-   * Draw a circle outline using midpoint algorithm
-   */
-  drawCircle(x0: number, y0: number, radius: number): void {
-    let x = radius;
-    let y = 0;
-    let err = 0;
-
-    while (x >= y) {
-      this.setPixel(x0 + x, y0 + y);
-      this.setPixel(x0 + y, y0 + x);
-      this.setPixel(x0 - y, y0 + x);
-      this.setPixel(x0 - x, y0 + y);
-      this.setPixel(x0 - x, y0 - y);
-      this.setPixel(x0 - y, y0 - x);
-      this.setPixel(x0 + y, y0 - x);
-      this.setPixel(x0 + x, y0 - y);
-
-      y++;
-      if (err <= 0) {
-        err += 2 * y + 1;
-      }
-      if (err > 0) {
-        x--;
-        err -= 2 * x + 1;
-      }
-    }
-  }
-
-  /**
-   * Draw a filled circle
-   */
-  fillCircle(x0: number, y0: number, radius: number): void {
-    let x = radius;
-    let y = 0;
-    let err = 0;
-
-    while (x >= y) {
-      this.drawHorizontalLine(x0 - x, y0 + y, 2 * x + 1);
-      this.drawHorizontalLine(x0 - y, y0 + x, 2 * y + 1);
-      this.drawHorizontalLine(x0 - x, y0 - y, 2 * x + 1);
-      this.drawHorizontalLine(x0 - y, y0 - x, 2 * y + 1);
-
-      y++;
-      if (err <= 0) {
-        err += 2 * y + 1;
-      }
-      if (err > 0) {
-        x--;
-        err -= 2 * x + 1;
-      }
-    }
-  }
-
-  /**
-   * Draw a quarter circle (quadrant 0-3)
-   */
-  drawCircleQuads(x0: number, y0: number, radius: number, quads: number): void {
-    let x = radius;
-    let y = 0;
-    let err = 0;
-
-    while (x >= y) {
-      if (quads & 0x1) {
-        this.setPixel(x0 + x, y0 - y);
-        this.setPixel(x0 + y, y0 - x);
-      }
-      if (quads & 0x2) {
-        this.setPixel(x0 - y, y0 - x);
-        this.setPixel(x0 - x, y0 - y);
-      }
-      if (quads & 0x4) {
-        this.setPixel(x0 - x, y0 + y);
-        this.setPixel(x0 - y, y0 + x);
-      }
-      if (quads & 0x8) {
-        this.setPixel(x0 + y, y0 + x);
-        this.setPixel(x0 + x, y0 + y);
-      }
-
-      y++;
-      if (err <= 0) {
-        err += 2 * y + 1;
-      }
-      if (err > 0) {
-        x--;
-        err -= 2 * x + 1;
-      }
-    }
-  }
-
-  /**
-   * Draw an XBM image (like firmware's drawXbm)
-   * XBM format: LSB first, horizontal
-   */
-  drawXbm(
-    x: number,
-    y: number,
-    width: number,
-    height: number,
-    xbm: Uint8Array | number[],
-  ): void {
-    const widthBytes = Math.ceil(width / 8);
-    for (let j = 0; j < height; j++) {
-      for (let i = 0; i < width; i++) {
-        const byteIndex = j * widthBytes + Math.floor(i / 8);
-        const bitIndex = i % 8;
-        if (xbm[byteIndex] & (1 << bitIndex)) {
-          this.setPixel(x + i, y + j);
-        }
-      }
-    }
-  }
-
-  /**
-   * Draw a PROGMEM-style image (vertical byte format, like some firmware icons)
-   */
-  drawFastImage(
-    x: number,
-    y: number,
-    width: number,
-    height: number,
-    image: Uint8Array | number[],
-  ): void {
-    const heightInBytes = Math.ceil(height / 8);
-    for (let i = 0; i < width; i++) {
-      for (let j = 0; j < heightInBytes; j++) {
-        const imageByte = image[i + j * width];
-        for (let bit = 0; bit < 8; bit++) {
-          if (imageByte & (1 << bit)) {
-            this.setPixel(x + i, y + j * 8 + bit);
-          }
-        }
-      }
-    }
-  }
-
-  /**
-   * Get the width of a string with the current font
-   */
-  getStringWidth(text: string): number {
-    if (!this.font) return 0;
-    let width = 0;
-    for (const char of text) {
-      const charCode = char.charCodeAt(0);
-      if (
-        charCode >= this.font.firstChar &&
-        charCode < this.font.firstChar + this.font.charCount
-      ) {
-        width += this.font.widths[charCode - this.font.firstChar];
-      } else {
-        // Unknown char - use space width or default
-        width += this.font.widths[0] || 4;
-      }
-    }
-    return width;
-  }
-
-  /**
-   * Draw a string at the given position
-   */
-  drawString(x: number, y: number, text: string): void {
-    if (!this.font) return;
-
-    // Adjust x based on alignment
-    let startX = x;
-    if (this.textAlignment === "TEXT_ALIGN_CENTER") {
-      startX = x - Math.floor(this.getStringWidth(text) / 2);
-    } else if (this.textAlignment === "TEXT_ALIGN_RIGHT") {
-      startX = x - this.getStringWidth(text);
-    }
-
-    let cursorX = startX;
-    for (const char of text) {
-      const charCode = char.charCodeAt(0);
-      if (
-        charCode >= this.font.firstChar &&
-        charCode < this.font.firstChar + this.font.charCount
-      ) {
-        const charIndex = charCode - this.font.firstChar;
-        const charWidth = this.font.widths[charIndex];
-
-        // Find the offset into the font data
-        let offset = 0;
-        const bytesPerColumn = Math.ceil(this.font.height / 8);
-        for (let i = 0; i < charIndex; i++) {
-          offset += this.font.widths[i] * bytesPerColumn;
-        }
-
-        // Draw the character
-        this.drawFontChar(
-          cursorX,
-          y,
-          charWidth,
-          this.font.height,
-          this.font.data,
-          offset,
-        );
-        cursorX += charWidth;
-      } else {
-        // Unknown character - advance by space
-        cursorX += this.font.widths[0] || 4;
-      }
-    }
-  }
-
-  /**
-   * Draw a single font character
-   */
-  private drawFontChar(
-    x: number,
-    y: number,
-    width: number,
-    height: number,
-    data: Uint8Array,
-    offset: number,
-  ): void {
-    const bytesPerColumn = Math.ceil(height / 8);
-    for (let col = 0; col < width; col++) {
-      for (let byteRow = 0; byteRow < bytesPerColumn; byteRow++) {
-        const dataByte = data[offset + col * bytesPerColumn + byteRow];
-        for (let bit = 0; bit < 8; bit++) {
-          const pixelY = byteRow * 8 + bit;
-          if (pixelY < height && dataByte & (1 << bit)) {
-            this.setPixel(x + col, y + pixelY);
-          }
-        }
-      }
-    }
-  }
-
-  /**
-   * Draw a string that wraps within maxWidth
-   */
-  drawStringMaxWidth(
-    x: number,
-    y: number,
-    maxWidth: number,
-    text: string,
-  ): void {
-    if (!this.font) return;
-
-    const words = text.split(" ");
-    let line = "";
-    let lineY = y;
-
-    for (const word of words) {
-      const testLine = line + (line ? " " : "") + word;
-      const testWidth = this.getStringWidth(testLine);
-
-      if (testWidth > maxWidth && line) {
-        this.drawString(x, lineY, line);
-        line = word;
-        lineY += this.font.height;
-      } else {
-        line = testLine;
-      }
-    }
-
-    if (line) {
-      this.drawString(x, lineY, line);
-    }
-  }
-
-  /**
-   * Draw a progress bar
-   */
-  drawProgressBar(
-    x: number,
-    y: number,
-    width: number,
-    height: number,
-    progress: number,
-  ): void {
-    // Clamp progress 0-100
-    progress = Math.max(0, Math.min(100, progress));
-
-    // Draw outline
-    this.drawRect(x, y, width, height);
-
-    // Draw fill
-    const fillWidth = Math.floor(((width - 4) * progress) / 100);
-    this.fillRect(x + 2, y + 2, fillWidth, height - 4);
-  }
-
-  /**
-   * Display - no-op for emulator (would send buffer to hardware)
-   */
-  display(): void {
-    // In real hardware this sends the buffer to the display
-    // For emulator, this is a no-op - we render from getBuffer()
-  }
-
-  /**
-   * Flip the display (useful for some mounting orientations)
-   */
-  flipScreenVertically(): void {
-    // Rotate buffer 180 degrees
-    const newBuffer = new Uint8Array(this.buffer.length);
-    const heightBytes = this._height / 8;
-
-    for (let x = 0; x < this._width; x++) {
-      for (let yByte = 0; yByte < heightBytes; yByte++) {
-        let srcByte = this.buffer[x + yByte * this._width];
-        // Reverse the bits
-        let reversed = 0;
-        for (let i = 0; i < 8; i++) {
-          if (srcByte & (1 << i)) {
-            reversed |= 1 << (7 - i);
-          }
-        }
-        // Place in mirrored position
-        const newX = this._width - 1 - x;
-        const newYByte = heightBytes - 1 - yByte;
-        newBuffer[newX + newYByte * this._width] = reversed;
-      }
-    }
-
-    this.buffer = newBuffer;
-  }
-}
-
-// Color constants for compatibility with firmware code style
-export const WHITE: OLEDDISPLAY_COLOR = "WHITE";
-export const BLACK: OLEDDISPLAY_COLOR = "BLACK";
-export const INVERSE: OLEDDISPLAY_COLOR = "INVERSE";
-
-export const TEXT_ALIGN_LEFT: OLEDDISPLAY_TEXT_ALIGNMENT = "TEXT_ALIGN_LEFT";
-export const TEXT_ALIGN_CENTER: OLEDDISPLAY_TEXT_ALIGNMENT =
-  "TEXT_ALIGN_CENTER";
-export const TEXT_ALIGN_RIGHT: OLEDDISPLAY_TEXT_ALIGNMENT = "TEXT_ALIGN_RIGHT";

oled-emulator/src/OLEDEmulator.vue

@@ -1,327 +0,0 @@
-<script setup lang="ts">
-/**
- * OLEDEmulator.vue - Vue 3 component for OLED display emulation
- * 
- * Renders an OLEDDisplay framebuffer with realistic OLED visual effects
- * including pixel glow, color tinting, and various display sizes.
- */
-
-import { ref, computed, watch, onMounted, onUnmounted, type PropType } from 'vue';
-import { OLEDDisplay } from './OLEDDisplay';
-import { DISPLAY_PRESETS, type DisplayPreset } from './DisplayPresets';
-
-const props = defineProps({
-  /**
-   * The OLEDDisplay instance to render
-   */
-  display: {
-    type: Object as PropType<OLEDDisplay>,
-    required: true,
-  },
-  /**
-   * Pixel scale factor (how many canvas pixels per OLED pixel)
-   */
-  pixelScale: {
-    type: Number,
-    default: 4,
-  },
-  /**
-   * Display preset name or custom preset object
-   */
-  preset: {
-    type: [String, Object] as PropType<string | DisplayPreset>,
-    default: 'ssd1306-blue',
-  },
-  /**
-   * Enable pixel glow effect (slight bloom around lit pixels)
-   */
-  enableGlow: {
-    type: Boolean,
-    default: true,
-  },
-  /**
-   * Enable sub-pixel rendering for more realistic look
-   */
-  enableSubPixel: {
-    type: Boolean,
-    default: false,
-  },
-  /**
-   * Show pixel grid lines
-   */
-  showGrid: {
-    type: Boolean,
-    default: false,
-  },
-  /**
-   * Auto-refresh interval in ms (0 = manual refresh only)
-   */
-  refreshInterval: {
-    type: Number,
-    default: 50,
-  },
-  /**
-   * Yellow/blue split mode for dual-color OLEDs (rows 0-15 yellow)
-   */
-  dualColor: {
-    type: Boolean,
-    default: false,
-  },
-});
-
-const emit = defineEmits<{
-  (e: 'click', x: number, y: number): void;
-  (e: 'refresh'): void;
-}>();
-
-const canvas = ref<HTMLCanvasElement | null>(null);
-const refreshTimer = ref<number | null>(null);
-
-// Get the current display preset
-const currentPreset = computed<DisplayPreset>(() => {
-  if (typeof props.preset === 'string') {
-    return DISPLAY_PRESETS[props.preset] || DISPLAY_PRESETS['ssd1306-blue'];
-  }
-  return props.preset;
-});
-
-// Canvas dimensions
-const canvasWidth = computed(() => props.display.width * props.pixelScale);
-const canvasHeight = computed(() => props.display.height * props.pixelScale);
-
-/**
- * Render the framebuffer to canvas with OLED effects
- */
-function render(): void {
-  const cvs = canvas.value;
-  if (!cvs) return;
-
-  const ctx = cvs.getContext('2d');
-  if (!ctx) return;
-
-  const buffer = props.display.getBuffer();
-  const width = props.display.width;
-  const height = props.display.height;
-  const scale = props.pixelScale;
-  const preset = currentPreset.value;
-
-  // Create image data
-  const imageData = ctx.createImageData(canvasWidth.value, canvasHeight.value);
-  const data = imageData.data;
-
-  // Yellow color for dual-color mode (top 16 rows)
-  const yellowOn = { r: 255, g: 220, b: 50 };
-  const blueOn = { r: 100, g: 180, b: 255 };
-
-  // Render each OLED pixel
-  for (let y = 0; y < height; y++) {
-    for (let x = 0; x < width; x++) {
-      // Get pixel from framebuffer (vertical byte packing)
-      const byteIndex = x + Math.floor(y / 8) * width;
-      const bitMask = 1 << (y & 7);
-      const isOn = (buffer[byteIndex] & bitMask) !== 0;
-
-      // Determine pixel color
-      let pixelColor: { r: number; g: number; b: number };
-      if (isOn) {
-        if (props.dualColor && y < 16) {
-          pixelColor = yellowOn;
-        } else if (props.dualColor) {
-          pixelColor = blueOn;
-        } else {
-          pixelColor = preset.pixelOn;
-        }
-      } else {
-        pixelColor = preset.pixelOff;
-      }
-
-      // Apply contrast
-      pixelColor = {
-        r: Math.min(255, pixelColor.r * preset.contrast),
-        g: Math.min(255, pixelColor.g * preset.contrast),
-        b: Math.min(255, pixelColor.b * preset.contrast),
-      };
-
-      // Scale up pixel to canvas
-      for (let sy = 0; sy < scale; sy++) {
-        for (let sx = 0; sx < scale; sx++) {
-          const px = x * scale + sx;
-          const py = y * scale + sy;
-          const idx = (py * canvasWidth.value + px) * 4;
-
-          // Apply glow effect (brighter center, dimmer edges)
-          let intensity = 1.0;
-          if (props.enableGlow && isOn) {
-            const centerX = scale / 2;
-            const centerY = scale / 2;
-            const dist = Math.sqrt(
-              Math.pow(sx - centerX, 2) + Math.pow(sy - centerY, 2)
-            );
-            const maxDist = Math.sqrt(2) * (scale / 2);
-            intensity = 1.0 - (dist / maxDist) * preset.glow;
-          }
-
-          // Apply sub-pixel rendering (RGB stripes)
-          if (props.enableSubPixel && isOn) {
-            const subPixelPos = sx % 3;
-            if (subPixelPos === 0) {
-              data[idx] = pixelColor.r * intensity * 1.2;
-              data[idx + 1] = pixelColor.g * intensity * 0.8;
-              data[idx + 2] = pixelColor.b * intensity * 0.8;
-            } else if (subPixelPos === 1) {
-              data[idx] = pixelColor.r * intensity * 0.8;
-              data[idx + 1] = pixelColor.g * intensity * 1.2;
-              data[idx + 2] = pixelColor.b * intensity * 0.8;
-            } else {
-              data[idx] = pixelColor.r * intensity * 0.8;
-              data[idx + 1] = pixelColor.g * intensity * 0.8;
-              data[idx + 2] = pixelColor.b * intensity * 1.2;
-            }
-          } else {
-            data[idx] = pixelColor.r * intensity;
-            data[idx + 1] = pixelColor.g * intensity;
-            data[idx + 2] = pixelColor.b * intensity;
-          }
-          data[idx + 3] = 255; // Alpha
-        }
-      }
-    }
-  }
-
-  // Draw grid lines if enabled
-  if (props.showGrid) {
-    for (let y = 0; y < height; y++) {
-      for (let x = 0; x < width; x++) {
-        // Draw right and bottom edge of each pixel
-        // Right edge
-        const rx = (x + 1) * scale - 1;
-        for (let sy = 0; sy < scale; sy++) {
-          const py = y * scale + sy;
-          const idx = (py * canvasWidth.value + rx) * 4;
-          data[idx] = Math.min(255, data[idx] + 20);
-          data[idx + 1] = Math.min(255, data[idx + 1] + 20);
-          data[idx + 2] = Math.min(255, data[idx + 2] + 20);
-        }
-        // Bottom edge
-        const by = (y + 1) * scale - 1;
-        for (let sx = 0; sx < scale; sx++) {
-          const px = x * scale + sx;
-          const idx = (by * canvasWidth.value + px) * 4;
-          data[idx] = Math.min(255, data[idx] + 20);
-          data[idx + 1] = Math.min(255, data[idx + 1] + 20);
-          data[idx + 2] = Math.min(255, data[idx + 2] + 20);
-        }
-      }
-    }
-  }
-
-  ctx.putImageData(imageData, 0, 0);
-  emit('refresh');
-}
-
-/**
- * Handle canvas click
- */
-function handleClick(event: MouseEvent): void {
-  const cvs = canvas.value;
-  if (!cvs) return;
-
-  const rect = cvs.getBoundingClientRect();
-  const scaleX = cvs.width / rect.width;
-  const scaleY = cvs.height / rect.height;
-
-  const canvasX = (event.clientX - rect.left) * scaleX;
-  const canvasY = (event.clientY - rect.top) * scaleY;
-
-  const oledX = Math.floor(canvasX / props.pixelScale);
-  const oledY = Math.floor(canvasY / props.pixelScale);
-
-  emit('click', oledX, oledY);
-}
-
-/**
- * Start auto-refresh timer
- */
-function startRefreshTimer(): void {
-  stopRefreshTimer();
-  if (props.refreshInterval > 0) {
-    refreshTimer.value = window.setInterval(render, props.refreshInterval);
-  }
-}
-
-/**
- * Stop auto-refresh timer
- */
-function stopRefreshTimer(): void {
-  if (refreshTimer.value !== null) {
-    clearInterval(refreshTimer.value);
-    refreshTimer.value = null;
-  }
-}
-
-// Lifecycle
-onMounted(() => {
-  render();
-  startRefreshTimer();
-});
-
-onUnmounted(() => {
-  stopRefreshTimer();
-});
-
-// Watch for changes
-watch(() => props.refreshInterval, startRefreshTimer);
-watch(() => props.display, render, { deep: true });
-watch(() => props.pixelScale, render);
-watch(() => props.preset, render);
-watch(() => props.enableGlow, render);
-watch(() => props.showGrid, render);
-watch(() => props.dualColor, render);
-
-// Expose render method for manual refresh
-defineExpose({ render });
-</script>
-
-<template>
-  <div class="oled-emulator-wrapper">
-    <canvas
-      ref="canvas"
-      :width="canvasWidth"
-      :height="canvasHeight"
-      class="oled-canvas"
-      @click="handleClick"
-    />
-    <div class="oled-bezel" v-if="$slots.bezel">
-      <slot name="bezel" />
-    </div>
-  </div>
-</template>
-
-<style scoped>
-.oled-emulator-wrapper {
-  display: inline-block;
-  position: relative;
-  background: #1a1a1a;
-  padding: 8px;
-  border-radius: 6px;
-  box-shadow: 
-    0 2px 8px rgba(0, 0, 0, 0.4),
-    inset 0 1px 0 rgba(255, 255, 255, 0.05);
-}
-
-.oled-canvas {
-  display: block;
-  border-radius: 2px;
-  image-rendering: pixelated;
-  image-rendering: crisp-edges;
-}
-
-.oled-bezel {
-  position: absolute;
-  top: 0;
-  left: 0;
-  right: 0;
-  bottom: 0;
-  pointer-events: none;
-}
-</style>

oled-emulator/src/OLEDFonts.ts

@@ -1,467 +0,0 @@
-/**
- * OLEDFonts.ts - Font data for OLED display emulator
- *
- * These are simplified bitmap fonts matching the style used in
- * Meshtastic firmware (based on ArialMT from esp8266-oled-ssd1306).
- *
- * Font format: Vertical byte packing, column-major order
- * Each character is drawn column by column, with each byte representing
- * 8 vertical pixels.
- */
-
-import type { OLEDFont } from "./OLEDDisplay";
-
-/**
- * ArialMT Plain 10 - Small font (height ~13 pixels)
- * Covers ASCII 32-126 (space through ~)
- */
-export const ArialMT_Plain_10: OLEDFont = {
-  height: 13,
-  firstChar: 32,
-  charCount: 95,
-  widths: [
-    3, // space
-    3, // !
-    4, // "
-    6, // #
-    6, // $
-    9, // %
-    7, // &
-    2, // '
-    4, // (
-    4, // )
-    5, // *
-    6, // +
-    3, // ,
-    4, // -
-    3, // .
-    4, // /
-    6, // 0
-    6, // 1
-    6, // 2
-    6, // 3
-    6, // 4
-    6, // 5
-    6, // 6
-    6, // 7
-    6, // 8
-    6, // 9
-    3, // :
-    3, // ;
-    6, // <
-    6, // =
-    6, // >
-    6, // ?
-    11, // @
-    8, // A
-    7, // B
-    7, // C
-    7, // D
-    6, // E
-    6, // F
-    8, // G
-    7, // H
-    3, // I
-    5, // J
-    7, // K
-    6, // L
-    9, // M
-    7, // N
-    8, // O
-    6, // P
-    8, // Q
-    7, // R
-    6, // S
-    6, // T
-    7, // U
-    7, // V
-    11, // W
-    7, // X
-    7, // Y
-    6, // Z
-    4, // [
-    4, // \
-    4, // ]
-    6, // ^
-    6, // _
-    4, // `
-    6, // a
-    6, // b
-    5, // c
-    6, // d
-    6, // e
-    4, // f
-    6, // g
-    6, // h
-    3, // i
-    3, // j
-    6, // k
-    3, // l
-    9, // m
-    6, // n
-    6, // o
-    6, // p
-    6, // q
-    4, // r
-    5, // s
-    4, // t
-    6, // u
-    6, // v
-    9, // w
-    6, // x
-    6, // y
-    5, // z
-    4, // {
-    3, // |
-    4, // }
-    6, // ~
-  ],
-  data: new Uint8Array([
-    // Space (32)
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // ! (33)
-    0x00, 0x00, 0xbe, 0x00, 0x00, 0x00,
-    // " (34)
-    0x00, 0x0e, 0x00, 0x0e, 0x00, 0x00, 0x00, 0x00,
-    // # (35)
-    0x00, 0x48, 0xf8, 0x4e, 0xf8, 0x4e, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // $ (36)
-    0x00, 0x9c, 0x92, 0xff, 0x92, 0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // % (37)
-    0x0c, 0x12, 0x12, 0x8c, 0x60, 0x18, 0xc6, 0x20, 0x20, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // & (38)
-    0x00, 0x60, 0x9c, 0x92, 0x6a, 0xa4, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00,
-    // ' (39)
-    0x00, 0x0e, 0x00, 0x00,
-    // ( (40)
-    0x00, 0x7c, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // ) (41)
-    0x00, 0x82, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // * (42)
-    0x14, 0x08, 0x3e, 0x08, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // + (43)
-    0x10, 0x10, 0x7c, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // , (44)
-    0x00, 0x00, 0xc0, 0x00, 0x00, 0x00,
-    // - (45)
-    0x10, 0x10, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00,
-    // . (46)
-    0x00, 0x00, 0x80, 0x00, 0x00, 0x00,
-    // / (47)
-    0x00, 0xc0, 0x38, 0x06, 0x00, 0x00, 0x00, 0x00,
-    // 0 (48)
-    0x7c, 0x82, 0x82, 0x82, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // 1 (49)
-    0x00, 0x04, 0x02, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // 2 (50)
-    0x84, 0xc2, 0xa2, 0x92, 0x8c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // 3 (51)
-    0x44, 0x82, 0x92, 0x92, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // 4 (52)
-    0x30, 0x28, 0x24, 0xfe, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // 5 (53)
-    0x4e, 0x8a, 0x8a, 0x8a, 0x72, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // 6 (54)
-    0x78, 0x94, 0x92, 0x92, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // 7 (55)
-    0x02, 0xc2, 0x32, 0x0a, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // 8 (56)
-    0x6c, 0x92, 0x92, 0x92, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // 9 (57)
-    0x0c, 0x92, 0x92, 0x52, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // : (58)
-    0x00, 0x00, 0x88, 0x00, 0x00, 0x00,
-    // ; (59)
-    0x00, 0x00, 0xc8, 0x00, 0x00, 0x00,
-    // < (60)
-    0x10, 0x28, 0x28, 0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // = (61)
-    0x28, 0x28, 0x28, 0x28, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // > (62)
-    0x44, 0x44, 0x28, 0x28, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // ? (63)
-    0x04, 0x02, 0xa2, 0x12, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // @ (64)
-    0xf0, 0x08, 0xe4, 0x12, 0x12, 0x12, 0xe2, 0x14, 0x08, 0xf0, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // A (65)
-    0x00, 0xc0, 0x38, 0x26, 0x26, 0x38, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00,
-    // B (66)
-    0xfe, 0x92, 0x92, 0x92, 0x92, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00,
-    // C (67)
-    0x7c, 0x82, 0x82, 0x82, 0x82, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00,
-    // D (68)
-    0xfe, 0x82, 0x82, 0x82, 0x44, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00,
-    // E (69)
-    0xfe, 0x92, 0x92, 0x92, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // F (70)
-    0xfe, 0x12, 0x12, 0x12, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // G (71)
-    0x7c, 0x82, 0x82, 0x92, 0x92, 0x74, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00,
-    // H (72)
-    0xfe, 0x10, 0x10, 0x10, 0x10, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00,
-    // I (73)
-    0x00, 0xfe, 0x00, 0x00, 0x00, 0x00,
-    // J (74)
-    0x40, 0x80, 0x80, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // K (75)
-    0xfe, 0x10, 0x28, 0x44, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00,
-    // L (76)
-    0xfe, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // M (77)
-    0xfe, 0x04, 0x18, 0x60, 0x60, 0x18, 0x04, 0xfe, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // N (78)
-    0xfe, 0x04, 0x08, 0x30, 0x40, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00,
-    // O (79)
-    0x7c, 0x82, 0x82, 0x82, 0x82, 0x82, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00,
-    // P (80)
-    0xfe, 0x12, 0x12, 0x12, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // Q (81)
-    0x7c, 0x82, 0x82, 0x82, 0x42, 0xc2, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00,
-    // R (82)
-    0xfe, 0x12, 0x12, 0x32, 0x4c, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00,
-    // S (83)
-    0x4c, 0x92, 0x92, 0x92, 0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // T (84)
-    0x02, 0x02, 0xfe, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // U (85)
-    0x7e, 0x80, 0x80, 0x80, 0x80, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00,
-    // V (86)
-    0x06, 0x18, 0x60, 0x80, 0x60, 0x18, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00,
-    // W (87)
-    0x06, 0x38, 0xc0, 0x38, 0x06, 0x38, 0xc0, 0x38, 0x06, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // X (88)
-    0x82, 0x44, 0x28, 0x10, 0x28, 0x44, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00,
-    // Y (89)
-    0x02, 0x04, 0x08, 0xf0, 0x08, 0x04, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00,
-    // Z (90)
-    0xc2, 0xa2, 0x92, 0x8a, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // [ (91)
-    0x00, 0xfe, 0x82, 0x82, 0x00, 0x00, 0x00, 0x00,
-    // \ (92)
-    0x06, 0x38, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // ] (93)
-    0x82, 0x82, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // ^ (94)
-    0x08, 0x04, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // _ (95)
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // ` (96)
-    0x00, 0x02, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // a (97)
-    0x40, 0xa8, 0xa8, 0xa8, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // b (98)
-    0xfe, 0x88, 0x88, 0x88, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // c (99)
-    0x70, 0x88, 0x88, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // d (100)
-    0x70, 0x88, 0x88, 0x88, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // e (101)
-    0x70, 0xa8, 0xa8, 0xa8, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // f (102)
-    0x08, 0xfc, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // g (103)
-    0x30, 0x48, 0x48, 0x48, 0xf8, 0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00,
-    // h (104)
-    0xfe, 0x08, 0x08, 0x08, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // i (105)
-    0x00, 0xfa, 0x00, 0x00, 0x00, 0x00,
-    // j (106)
-    0x00, 0x00, 0xfa, 0x01, 0x00, 0x00,
-    // k (107)
-    0xfe, 0x20, 0x50, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // l (108)
-    0x00, 0xfe, 0x00, 0x00, 0x00, 0x00,
-    // m (109)
-    0xf8, 0x08, 0x08, 0xf0, 0x08, 0x08, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // n (110)
-    0xf8, 0x08, 0x08, 0x08, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // o (111)
-    0x70, 0x88, 0x88, 0x88, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // p (112)
-    0xf8, 0x48, 0x48, 0x48, 0x30, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // q (113)
-    0x30, 0x48, 0x48, 0x48, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
-    // r (114)
-    0xf8, 0x10, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // s (115)
-    0x90, 0xa8, 0xa8, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // t (116)
-    0x08, 0x7e, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // u (117)
-    0x78, 0x80, 0x80, 0x80, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // v (118)
-    0x18, 0x60, 0x80, 0x60, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // w (119)
-    0x78, 0x80, 0x60, 0x18, 0x60, 0x80, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // x (120)
-    0x88, 0x50, 0x20, 0x50, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // y (121)
-    0x18, 0x60, 0x80, 0x60, 0x18, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // z (122)
-    0xc8, 0xa8, 0x98, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // { (123)
-    0x10, 0x6c, 0x82, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // | (124)
-    0x00, 0xfe, 0x00, 0x00, 0x00, 0x00,
-    // } (125)
-    0x82, 0x6c, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // ~ (126)
-    0x10, 0x08, 0x10, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  ]),
-};
-
-/**
- * ArialMT Plain 16 - Medium font (height ~19 pixels)
- * Simplified subset covering 0-9, A-Z, a-z, common punctuation
- */
-export const ArialMT_Plain_16: OLEDFont = {
-  height: 19,
-  firstChar: 32,
-  charCount: 95,
-  widths: [
-    4, // space
-    4, // !
-    5, // "
-    8, // #
-    8, // $
-    12, // %
-    10, // &
-    2, // '
-    5, // (
-    5, // )
-    6, // *
-    8, // +
-    4, // ,
-    5, // -
-    4, // .
-    4, // /
-    8, // 0
-    8, // 1
-    8, // 2
-    8, // 3
-    8, // 4
-    8, // 5
-    8, // 6
-    8, // 7
-    8, // 8
-    8, // 9
-    4, // :
-    4, // ;
-    8, // <
-    8, // =
-    8, // >
-    8, // ?
-    15, // @
-    10, // A
-    9, // B
-    10, // C
-    10, // D
-    9, // E
-    8, // F
-    11, // G
-    9, // H
-    4, // I
-    6, // J
-    9, // K
-    8, // L
-    11, // M
-    9, // N
-    11, // O
-    9, // P
-    11, // Q
-    10, // R
-    9, // S
-    8, // T
-    9, // U
-    10, // V
-    14, // W
-    10, // X
-    10, // Y
-    9, // Z
-    4, // [
-    4, // \
-    4, // ]
-    7, // ^
-    8, // _
-    5, // `
-    8, // a
-    8, // b
-    7, // c
-    8, // d
-    8, // e
-    4, // f
-    8, // g
-    8, // h
-    4, // i
-    4, // j
-    8, // k
-    4, // l
-    12, // m
-    8, // n
-    8, // o
-    8, // p
-    8, // q
-    5, // r
-    7, // s
-    4, // t
-    8, // u
-    8, // v
-    12, // w
-    8, // x
-    8, // y
-    7, // z
-    5, // {
-    4, // |
-    5, // }
-    8, // ~
-  ],
-  // Font data would be similar pattern but larger - using placeholder
-  data: new Uint8Array(2500).fill(0xff), // Placeholder - would contain actual font bitmap data
-};
-
-/**
- * Helper to get FONT_HEIGHT_SMALL equivalent
- */
-export const FONT_HEIGHT_SMALL = 13;
-export const FONT_HEIGHT_MEDIUM = 19;
-export const FONT_HEIGHT_LARGE = 28;
-
-/**
- * Helper function to create a font from raw byte data (for importing firmware fonts)
- */
-export function createFontFromBytes(
-  height: number,
-  firstChar: number,
-  widths: number[],
-  data: number[],
-): OLEDFont {
-  return {
-    height,
-    firstChar,
-    charCount: widths.length,
-    widths,
-    data: new Uint8Array(data),
-  };
-}

oled-emulator/src/OLEDImages.ts

@@ -1,255 +0,0 @@
-/**
- * OLEDImages.ts - Icon and image data for OLED display emulator
- *
- * These are direct ports of the XBM/bitmap icons from the Meshtastic firmware.
- * Format: XBM style (LSB first, horizontal scanning)
- */
-
-// Satellite icon (8x8)
-export const imgSatellite_width = 8;
-export const imgSatellite_height = 8;
-export const imgSatellite = new Uint8Array([
-  0b00000000, 0b00000000, 0b00000000, 0b00011000, 0b11011011, 0b11111111,
-  0b11011011, 0b00011000,
-]);
-
-// USB icon (10x8)
-export const imgUSB = new Uint8Array([
-  0x00, 0xfc, 0xf0, 0xfc, 0x88, 0xff, 0x86, 0xfe, 0x85, 0xfe, 0x89, 0xff, 0xf1,
-  0xfc, 0x00, 0xfc,
-]);
-
-// Power icon (8x16)
-export const imgPower = new Uint8Array([
-  0x40, 0x40, 0x40, 0x58, 0x48, 0x08, 0x08, 0x08, 0x1c, 0x22, 0x22, 0x41, 0x7f,
-  0x22, 0x22, 0x22,
-]);
-
-// User icon (8x8)
-export const imgUser = new Uint8Array([
-  0x3c, 0x42, 0x99, 0xa5, 0xa5, 0x99, 0x42, 0x3c,
-]);
-
-// Position empty arrow (6x8)
-export const imgPositionEmpty = new Uint8Array([
-  0x20, 0x30, 0x28, 0x24, 0x42, 0xff,
-]);
-
-// Position solid arrow (6x8)
-export const imgPositionSolid = new Uint8Array([
-  0x20, 0x30, 0x38, 0x3c, 0x7e, 0xff,
-]);
-
-// Mail icon (10x7)
-export const mail_width = 10;
-export const mail_height = 7;
-export const mail = new Uint8Array([
-  0b11111111,
-  0b00, // Top line
-  0b10000001,
-  0b00, // Edges
-  0b11000011,
-  0b00, // Diagonals start
-  0b10100101,
-  0b00, // Inner M part
-  0b10011001,
-  0b00, // Inner M part
-  0b10000001,
-  0b00, // Edges
-  0b11111111,
-  0b00, // Bottom line
-]);
-
-// Hop icon (9x10)
-export const hop_width = 9;
-export const hop_height = 10;
-export const hop = new Uint8Array([
-  0x05, 0x00, 0x07, 0x00, 0x05, 0x00, 0x38, 0x00, 0x28, 0x00, 0x38, 0x00, 0xc0,
-  0x01, 0x40, 0x01, 0xc0, 0x01, 0x40, 0x00,
-]);
-
-// Mail icon (8x8)
-export const icon_mail = new Uint8Array([
-  0b11111111, // ████████ top border
-  0b10000001, // █      █ sides
-  0b11000011, // ██    ██ diagonal
-  0b10100101, // █ █  █ █ inner M
-  0b10011001, // █  ██  █ inner M
-  0b10000001, // █      █ sides
-  0b10000001, // █      █ sides
-  0b11111111, // ████████ bottom
-]);
-
-// Compass icon (8x8)
-export const icon_compass = new Uint8Array([
-  0x3c, // Row 0: ..####..
-  0x52, // Row 1: .#..#.#.
-  0x91, // Row 2: #...#..#
-  0x91, // Row 3: #...#..#
-  0x91, // Row 4: #...#..#
-  0x81, // Row 5: #......#
-  0x42, // Row 6: .#....#.
-  0x3c, // Row 7: ..####..
-]);
-
-// Radio icon (8x8)
-export const icon_radio = new Uint8Array([
-  0x0f, // Row 0: ####....
-  0x10, // Row 1: ....#...
-  0x27, // Row 2: ###..#..
-  0x48, // Row 3: ...#..#.
-  0x93, // Row 4: ##..#..#
-  0xa4, // Row 5: ..#..#.#
-  0xa8, // Row 6: ...#.#.#
-  0xa9, // Row 7: #..#.#.#
-]);
-
-// System/settings icon (8x8)
-export const icon_system = new Uint8Array([
-  0x24, // Row 0: ..#..#..
-  0x3c, // Row 1: ..####..
-  0xc3, // Row 2: ##....##
-  0x5a, // Row 3: .#.##.#.
-  0x5a, // Row 4: .#.##.#.
-  0xc3, // Row 5: ##....##
-  0x3c, // Row 6: ..####..
-  0x24, // Row 7: ..#..#..
-]);
-
-// WiFi icon (8x8)
-export const icon_wifi = new Uint8Array([
-  0b00000000, 0b00011000, 0b00111100, 0b01111110, 0b11011011, 0b00011000,
-  0b00011000, 0b00000000,
-]);
-
-// Nodes icon (8x8)
-export const icon_nodes = new Uint8Array([
-  0xf9, // Row 0: #..#####
-  0x00, // Row 1
-  0xf9, // Row 2: #..#####
-  0x00, // Row 3
-  0xf9, // Row 4: #..#####
-  0x00, // Row 5
-  0xf9, // Row 6: #..#####
-  0x00, // Row 7
-]);
-
-// Battery vertical (7x11)
-export const batteryBitmap_v = new Uint8Array([
-  0b00011100, 0b00111110, 0b01000001, 0b01000001, 0b00000000, 0b00000000,
-  0b00000000, 0b01000001, 0b01000001, 0b01000001, 0b00111110,
-]);
-
-// Battery side gaps (8x3)
-export const batteryBitmap_sidegaps_v = new Uint8Array([
-  0b10000010, 0b10000010, 0b10000010,
-]);
-
-// Lightning bolt vertical (5x5)
-export const lightning_bolt_v = new Uint8Array([
-  0b00000100, 0b00000110, 0b00011111, 0b00001100, 0b00000100,
-]);
-
-// Horizontal battery bottom (13x9)
-export const batteryBitmap_h_bottom = new Uint8Array([
-  0b00011110, 0b00000000, 0b00000001, 0b00000000, 0b00000001, 0b00000000,
-  0b00000001, 0b00000000, 0b00000001, 0b00000000, 0b00000001, 0b00000000,
-  0b00000001, 0b00000000, 0b00000001, 0b00000000, 0b00000001, 0b00000000,
-  0b00000001, 0b00000000, 0b00000001, 0b00000000, 0b00000001, 0b00000000,
-  0b00011110, 0b00000000,
-]);
-
-// Horizontal battery top (13x9)
-export const batteryBitmap_h_top = new Uint8Array([
-  0b00111100, 0b00000000, 0b01000000, 0b00000000, 0b01000000, 0b00000000,
-  0b01000000, 0b00000000, 0b01000000, 0b00000000, 0b11000000, 0b00000000,
-  0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b01000000, 0b00000000,
-  0b01000000, 0b00000000, 0b01000000, 0b00000000, 0b01000000, 0b00000000,
-  0b00111100, 0b00000000,
-]);
-
-// Lightning bolt horizontal (13x9)
-export const lightning_bolt_h = new Uint8Array([
-  0b00000000, 0b00000000, 0b00100000, 0b00000000, 0b00110000, 0b00000000,
-  0b00111000, 0b00000000, 0b00111100, 0b00000000, 0b00011110, 0b00000000,
-  0b11111111, 0b00000000, 0b01111000, 0b00000000, 0b00111100, 0b00000000,
-  0b00011100, 0b00000000, 0b00001100, 0b00000000, 0b00000100, 0b00000000,
-  0b00000000, 0b00000000,
-]);
-
-// Signal bars icon (various signal strengths)
-export const signal_bars = {
-  width: 12,
-  height: 8,
-  // 0 bars
-  none: new Uint8Array([
-    0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000,
-    0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000,
-    0b00000000, 0b00000000, 0b00000000, 0b00000000,
-  ]),
-  // 1 bar
-  low: new Uint8Array([
-    0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000,
-    0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000,
-    0b00000011, 0b00000000, 0b00000011, 0b00000000,
-  ]),
-  // 2 bars
-  medium: new Uint8Array([
-    0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000,
-    0b00000000, 0b00000000, 0b00001100, 0b00000000, 0b00001100, 0b00000000,
-    0b00001111, 0b00000000, 0b00001111, 0b00000000,
-  ]),
-  // 3 bars
-  high: new Uint8Array([
-    0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00110000, 0b00000000,
-    0b00110000, 0b00000000, 0b00111100, 0b00000000, 0b00111100, 0b00000000,
-    0b00111111, 0b00000000, 0b00111111, 0b00000000,
-  ]),
-  // 4 bars (full)
-  full: new Uint8Array([
-    0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11110000, 0b00000000,
-    0b11110000, 0b00000000, 0b11111100, 0b00000000, 0b11111100, 0b00000000,
-    0b11111111, 0b00000000, 0b11111111, 0b00000000,
-  ]),
-};
-
-// Meshtastic logo (simplified 32x32)
-export const logo_width = 32;
-export const logo_height = 32;
-export const meshtastic_logo = new Uint8Array([
-  0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x3f, 0x00, 0x00, 0x06, 0x60, 0x00, 0x00,
-  0x03, 0xc0, 0x00, 0x80, 0x01, 0x80, 0x01, 0xc0, 0x00, 0x00, 0x03, 0x60, 0x00,
-  0x00, 0x06, 0x30, 0x00, 0x00, 0x0c, 0x18, 0xf8, 0x1f, 0x18, 0x08, 0x04, 0x20,
-  0x10, 0x0c, 0x02, 0x40, 0x30, 0x04, 0x01, 0x80, 0x20, 0x06, 0x01, 0x80, 0x60,
-  0x02, 0xe1, 0x87, 0x40, 0x02, 0x11, 0x88, 0x40, 0x03, 0x09, 0x90, 0xc0, 0x03,
-  0x09, 0x90, 0xc0, 0x02, 0x11, 0x88, 0x40, 0x02, 0xe1, 0x87, 0x40, 0x06, 0x01,
-  0x80, 0x60, 0x04, 0x01, 0x80, 0x20, 0x0c, 0x02, 0x40, 0x30, 0x08, 0x04, 0x20,
-  0x10, 0x18, 0xf8, 0x1f, 0x18, 0x30, 0x00, 0x00, 0x0c, 0x60, 0x00, 0x00, 0x06,
-  0xc0, 0x00, 0x00, 0x03, 0x80, 0x01, 0x80, 0x01, 0x00, 0x03, 0xc0, 0x00, 0x00,
-  0x06, 0x60, 0x00, 0x00, 0xfc, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00,
-]);
-
-// Bluetooth icon (8x11)
-export const icon_bluetooth = new Uint8Array([
-  0b00000000, 0b10000100, 0b01001010, 0b00101010, 0b00010100, 0b11111111,
-  0b00010100, 0b00101010, 0b01001010, 0b10000100, 0b00000000,
-]);
-
-// GPS/Location pin icon (8x12)
-export const icon_gps_pin = new Uint8Array([
-  0b00111100, 0b01111110, 0b11111111, 0b11100111, 0b11100111, 0b11111111,
-  0b01111110, 0b00111100, 0b00011000, 0b00011000, 0b00001000, 0b00000000,
-]);
-
-// Message/chat bubble icon (10x8)
-export const icon_message = new Uint8Array([
-  0b11111111, 0b00, 0b10000001, 0b00, 0b10000001, 0b00, 0b10000001, 0b00,
-  0b10000001, 0b00, 0b11111111, 0b00, 0b00000110, 0b00, 0b00000010, 0b00,
-]);
-
-/**
- * Helper to convert icon data to XBM format if needed
- */
-export function toXbm(data: Uint8Array | number[]): Uint8Array {
-  return data instanceof Uint8Array ? data : new Uint8Array(data);
-}

oled-emulator/src/ScreenRenderers.ts

@@ -1,627 +0,0 @@
-/**
- * ScreenRenderers.ts - Sample screen rendering functions
- *
- * These demonstrate how to port Meshtastic firmware UI screens
- * to the OLED emulator. The API matches the firmware's drawing code.
- */
-
-import {
-  OLEDDisplay,
-  WHITE,
-  BLACK,
-  TEXT_ALIGN_LEFT,
-  TEXT_ALIGN_CENTER,
-  TEXT_ALIGN_RIGHT,
-} from "./OLEDDisplay";
-import { Font_6x8 } from "./SimpleFonts";
-import * as images from "./OLEDImages";
-
-// Font height for simple 6x8 font
-const FONT_HEIGHT_SMALL = 8;
-
-// Screen resolution detection (matches SharedUIDisplay.cpp)
-export type ScreenResolution = "UltraLow" | "Low" | "High";
-
-export function determineScreenResolution(
-  width: number,
-  height: number,
-): ScreenResolution {
-  if (width <= 64 || height <= 48) {
-    return "UltraLow";
-  }
-  if (width > 128) {
-    return "High";
-  }
-  return "Low";
-}
-
-// Helper for consistent line positioning
-export function getTextPositions(display: OLEDDisplay): number[] {
-  const fontHeight = FONT_HEIGHT_SMALL;
-  return [
-    0, // textZeroLine
-    fontHeight - 1, // textFirstLine
-    fontHeight - 1 + (fontHeight - 5), // textSecondLine
-    fontHeight - 1 + 2 * (fontHeight - 5), // textThirdLine
-    fontHeight - 1 + 3 * (fontHeight - 5), // textFourthLine
-    fontHeight - 1 + 4 * (fontHeight - 5), // textFifthLine
-  ];
-}
-
-/**
- * Draw a rounded highlight box (used for inverted headers)
- */
-export function drawRoundedHighlight(
-  display: OLEDDisplay,
-  x: number,
-  y: number,
-  w: number,
-  h: number,
-  r: number,
-): void {
-  // Draw the center and side rectangles
-  display.fillRect(x + r, y, w - 2 * r, h); // center bar
-  display.fillRect(x, y + r, r, h - 2 * r); // left edge
-  display.fillRect(x + w - r, y + r, r, h - 2 * r); // right edge
-
-  // Draw the rounded corners using filled circles
-  display.fillCircle(x + r + 1, y + r, r); // top-left
-  display.fillCircle(x + w - r - 1, y + r, r); // top-right
-  display.fillCircle(x + r + 1, y + h - r - 1, r); // bottom-left
-  display.fillCircle(x + w - r - 1, y + h - r - 1, r); // bottom-right
-}
-
-/**
- * Draw the common header bar (battery, title, icons)
- */
-export function drawCommonHeader(
-  display: OLEDDisplay,
-  x: number,
-  y: number,
-  titleStr: string,
-  options: {
-    inverted?: boolean;
-    batteryPercent?: number;
-    isCharging?: boolean;
-    hasUSB?: boolean;
-    hasUnreadMessage?: boolean;
-  } = {},
-): void {
-  const {
-    inverted = true,
-    batteryPercent = 75,
-    isCharging = false,
-    hasUSB = false,
-    hasUnreadMessage = false,
-  } = options;
-
-  const HEADER_OFFSET_Y = 1;
-  y += HEADER_OFFSET_Y;
-
-  display.setFont(Font_6x8);
-  const highlightHeight = FONT_HEIGHT_SMALL - 1;
-  const screenW = display.getWidth();
-
-  if (inverted) {
-    // Draw inverted header background
-    display.setColor(WHITE);
-    drawRoundedHighlight(display, x, y, screenW, highlightHeight, 2);
-    display.setColor(BLACK);
-  } else {
-    // Draw line under header
-    display.setColor(WHITE);
-    display.drawLine(0, 14, screenW, 14);
-  }
-
-  // Draw title centered
-  display.setTextAlignment(TEXT_ALIGN_CENTER);
-  display.drawString(screenW / 2, y, titleStr);
-
-  // Reset color for remaining elements
-  if (inverted) {
-    display.setColor(WHITE);
-  }
-
-  // Draw battery on left
-  let batteryX = 1;
-  const batteryY = HEADER_OFFSET_Y + 1;
-
-  if (hasUSB && !isCharging) {
-    // Draw USB icon
-    display.drawXbm(batteryX + 1, batteryY + 2, 10, 8, images.imgUSB);
-    batteryX += 11;
-  } else {
-    // Draw battery outline
-    display.drawXbm(batteryX, batteryY, 7, 11, images.batteryBitmap_v);
-
-    if (isCharging) {
-      // Draw lightning bolt
-      display.drawXbm(
-        batteryX + 1,
-        batteryY + 3,
-        5,
-        5,
-        images.lightning_bolt_v,
-      );
-    } else {
-      // Draw battery level
-      display.drawXbm(
-        batteryX - 1,
-        batteryY + 4,
-        8,
-        3,
-        images.batteryBitmap_sidegaps_v,
-      );
-      const fillHeight = Math.floor((8 * batteryPercent) / 100);
-      const fillY = batteryY - fillHeight + 10;
-      display.fillRect(batteryX + 1, fillY, 5, fillHeight);
-    }
-    batteryX += 9;
-  }
-
-  // Draw mail icon on right if unread message
-  if (hasUnreadMessage) {
-    const mailX = screenW - images.mail_width - 2;
-    display.drawXbm(
-      mailX,
-      y + 2,
-      images.mail_width,
-      images.mail_height,
-      images.mail,
-    );
-  }
-
-  display.setTextAlignment(TEXT_ALIGN_LEFT);
-  display.setColor(WHITE);
-}
-
-/**
- * Draw a boot/splash screen with logo
- */
-export function drawBootScreen(
-  display: OLEDDisplay,
-  appVersion: string = "2.5.0",
-): void {
-  display.clear();
-  display.setFont(Font_6x8);
-  display.setColor(WHITE);
-
-  const centerX = display.getWidth() / 2;
-  const centerY = display.getHeight() / 2;
-
-  // Draw logo centered
-  const logoX = centerX - images.logo_width / 2;
-  const logoY = centerY - images.logo_height / 2 - 8;
-  display.drawXbm(
-    logoX,
-    logoY,
-    images.logo_width,
-    images.logo_height,
-    images.meshtastic_logo,
-  );
-
-  // Draw version below
-  display.setTextAlignment(TEXT_ALIGN_CENTER);
-  display.drawString(
-    centerX,
-    centerY + images.logo_height / 2,
-    `v${appVersion}`,
-  );
-
-  display.setTextAlignment(TEXT_ALIGN_LEFT);
-}
-
-/**
- * Draw a node info screen
- */
-export function drawNodeInfoScreen(
-  display: OLEDDisplay,
-  nodeInfo: {
-    shortName: string;
-    longName: string;
-    nodeId: string;
-    batteryLevel?: number;
-    lastHeard?: string;
-    snr?: number;
-    hopsAway?: number;
-  },
-): void {
-  display.clear();
-
-  // Draw header
-  drawCommonHeader(display, 0, 0, "Node Info", {
-    inverted: true,
-    batteryPercent: 85,
-  });
-
-  display.setFont(Font_6x8);
-  display.setColor(WHITE);
-  display.setTextAlignment(TEXT_ALIGN_LEFT);
-
-  const lines = getTextPositions(display);
-  const screenW = display.getWidth();
-
-  // Node name (bolded by drawing twice offset)
-  display.drawString(0, lines[1], nodeInfo.longName);
-  display.drawString(1, lines[1], nodeInfo.longName);
-
-  // Short name and ID
-  display.drawString(0, lines[2], `${nodeInfo.shortName} • ${nodeInfo.nodeId}`);
-
-  // Last heard
-  if (nodeInfo.lastHeard) {
-    display.drawString(0, lines[3], `Heard: ${nodeInfo.lastHeard}`);
-  }
-
-  // Signal info on right side
-  if (nodeInfo.snr !== undefined) {
-    const snrStr = `SNR: ${nodeInfo.snr}dB`;
-    display.setTextAlignment(TEXT_ALIGN_RIGHT);
-    display.drawString(screenW, lines[3], snrStr);
-  }
-
-  // Hops
-  if (nodeInfo.hopsAway !== undefined) {
-    const hopStr =
-      nodeInfo.hopsAway === 0 ? "Direct" : `${nodeInfo.hopsAway} hops`;
-    display.setTextAlignment(TEXT_ALIGN_LEFT);
-    display.drawString(0, lines[4], hopStr);
-  }
-
-  display.setTextAlignment(TEXT_ALIGN_LEFT);
-}
-
-/**
- * Draw a message screen
- */
-export function drawMessageScreen(
-  display: OLEDDisplay,
-  message: {
-    from: string;
-    text: string;
-    time: string;
-    channel?: string;
-  },
-): void {
-  display.clear();
-
-  // Draw header with channel name if provided
-  const headerTitle = message.channel || "Message";
-  drawCommonHeader(display, 0, 0, headerTitle, {
-    inverted: true,
-    batteryPercent: 72,
-    hasUnreadMessage: true,
-  });
-
-  display.setFont(Font_6x8);
-  display.setColor(WHITE);
-  display.setTextAlignment(TEXT_ALIGN_LEFT);
-
-  const lines = getTextPositions(display);
-  const screenW = display.getWidth();
-
-  // From line
-  display.drawString(0, lines[1], `From: ${message.from}`);
-
-  // Time on right
-  display.setTextAlignment(TEXT_ALIGN_RIGHT);
-  display.drawString(screenW, lines[1], message.time);
-
-  // Message text (with word wrap)
-  display.setTextAlignment(TEXT_ALIGN_LEFT);
-  display.drawStringMaxWidth(0, lines[2], screenW, message.text);
-}
-
-/**
- * Draw a GPS/location screen
- */
-export function drawGPSScreen(
-  display: OLEDDisplay,
-  gpsInfo: {
-    latitude?: number;
-    longitude?: number;
-    altitude?: number;
-    satellites?: number;
-    hasLock: boolean;
-    speed?: number;
-  },
-): void {
-  display.clear();
-
-  drawCommonHeader(display, 0, 0, "GPS", {
-    inverted: true,
-    batteryPercent: 90,
-  });
-
-  display.setFont(Font_6x8);
-  display.setColor(WHITE);
-  display.setTextAlignment(TEXT_ALIGN_LEFT);
-
-  const lines = getTextPositions(display);
-
-  // Draw satellite icon and count
-  display.drawXbm(
-    0,
-    lines[1],
-    images.imgSatellite_width,
-    images.imgSatellite_height,
-    images.imgSatellite,
-  );
-
-  if (!gpsInfo.hasLock) {
-    display.drawString(12, lines[1], "No Lock");
-  } else {
-    display.drawString(12, lines[1], `${gpsInfo.satellites || 0} sats`);
-  }
-
-  if (
-    gpsInfo.hasLock &&
-    gpsInfo.latitude !== undefined &&
-    gpsInfo.longitude !== undefined
-  ) {
-    // Coordinates
-    display.drawString(0, lines[2], `Lat: ${gpsInfo.latitude.toFixed(6)}`);
-    display.drawString(0, lines[3], `Lon: ${gpsInfo.longitude.toFixed(6)}`);
-
-    // Altitude
-    if (gpsInfo.altitude !== undefined) {
-      display.drawString(0, lines[4], `Alt: ${gpsInfo.altitude.toFixed(0)}m`);
-    }
-
-    // Speed
-    if (gpsInfo.speed !== undefined) {
-      const screenW = display.getWidth();
-      display.setTextAlignment(TEXT_ALIGN_RIGHT);
-      display.drawString(screenW, lines[4], `${gpsInfo.speed.toFixed(1)} km/h`);
-    }
-  }
-
-  display.setTextAlignment(TEXT_ALIGN_LEFT);
-}
-
-/**
- * Draw a node list screen
- */
-export function drawNodeListScreen(
-  display: OLEDDisplay,
-  nodes: Array<{
-    shortName: string;
-    longName: string;
-    lastHeard: string;
-    snr?: number;
-  }>,
-  selectedIndex: number = 0,
-): void {
-  display.clear();
-
-  drawCommonHeader(display, 0, 0, `Nodes (${nodes.length})`, {
-    inverted: true,
-    batteryPercent: 80,
-  });
-
-  display.setFont(Font_6x8);
-  display.setColor(WHITE);
-  display.setTextAlignment(TEXT_ALIGN_LEFT);
-
-  const lines = getTextPositions(display);
-  const screenW = display.getWidth();
-  const maxVisibleNodes = 4;
-  const startIndex = Math.max(
-    0,
-    selectedIndex - Math.floor(maxVisibleNodes / 2),
-  );
-
-  for (let i = 0; i < maxVisibleNodes && startIndex + i < nodes.length; i++) {
-    const node = nodes[startIndex + i];
-    const lineY = lines[i + 1];
-    const isSelected = startIndex + i === selectedIndex;
-
-    // Highlight selected row
-    if (isSelected) {
-      display.fillRect(0, lineY - 1, screenW, FONT_HEIGHT_SMALL);
-      display.setColor(BLACK);
-    }
-
-    // Node short name
-    display.drawString(0, lineY, node.shortName);
-
-    // Last heard on right
-    display.setTextAlignment(TEXT_ALIGN_RIGHT);
-    display.drawString(screenW, lineY, node.lastHeard);
-    display.setTextAlignment(TEXT_ALIGN_LEFT);
-
-    if (isSelected) {
-      display.setColor(WHITE);
-    }
-  }
-}
-
-/**
- * Draw a system info screen
- */
-export function drawSystemScreen(
-  display: OLEDDisplay,
-  sysInfo: {
-    uptime: string;
-    channelUtil: number;
-    airUtil: number;
-    batteryVoltage?: number;
-    nodes: number;
-    freeMemory?: number;
-  },
-): void {
-  display.clear();
-
-  drawCommonHeader(display, 0, 0, "System", {
-    inverted: true,
-    batteryPercent: 95,
-  });
-
-  display.setFont(Font_6x8);
-  display.setColor(WHITE);
-  display.setTextAlignment(TEXT_ALIGN_LEFT);
-
-  const lines = getTextPositions(display);
-  const screenW = display.getWidth();
-
-  // Uptime
-  display.drawString(0, lines[1], `Uptime: ${sysInfo.uptime}`);
-
-  // Channel utilization
-  display.drawString(0, lines[2], `ChUtil: ${sysInfo.channelUtil.toFixed(1)}%`);
-
-  // Air utilization
-  display.setTextAlignment(TEXT_ALIGN_RIGHT);
-  display.drawString(
-    screenW,
-    lines[2],
-    `AirTx: ${sysInfo.airUtil.toFixed(1)}%`,
-  );
-  display.setTextAlignment(TEXT_ALIGN_LEFT);
-
-  // Nodes
-  display.drawString(0, lines[3], `Nodes: ${sysInfo.nodes}`);
-
-  // Battery voltage
-  if (sysInfo.batteryVoltage !== undefined) {
-    display.setTextAlignment(TEXT_ALIGN_RIGHT);
-    display.drawString(
-      screenW,
-      lines[3],
-      `${sysInfo.batteryVoltage.toFixed(2)}V`,
-    );
-  }
-
-  // Free memory
-  if (sysInfo.freeMemory !== undefined) {
-    display.setTextAlignment(TEXT_ALIGN_LEFT);
-    display.drawString(
-      0,
-      lines[4],
-      `Free: ${(sysInfo.freeMemory / 1024).toFixed(0)}KB`,
-    );
-  }
-
-  display.setTextAlignment(TEXT_ALIGN_LEFT);
-}
-
-/**
- * Draw a compass screen with bearing arrow
- */
-export function drawCompassScreen(
-  display: OLEDDisplay,
-  compassInfo: {
-    heading: number; // Device heading in degrees
-    bearing: number; // Bearing to target in degrees
-    distance?: number; // Distance to target in meters
-    targetName?: string;
-  },
-): void {
-  display.clear();
-
-  drawCommonHeader(display, 0, 0, compassInfo.targetName || "Compass", {
-    inverted: true,
-    batteryPercent: 70,
-  });
-
-  display.setFont(Font_6x8);
-  display.setColor(WHITE);
-
-  const screenW = display.getWidth();
-  const screenH = display.getHeight();
-
-  // Compass center and radius
-  const compassRadius = Math.min(screenW, screenH - 20) / 2 - 4;
-  const compassX = screenW / 2;
-  const compassY = (screenH + 16) / 2;
-
-  // Draw compass circle
-  display.drawCircle(compassX, compassY, compassRadius);
-
-  // Draw cardinal directions
-  display.setTextAlignment(TEXT_ALIGN_CENTER);
-  display.drawString(compassX, compassY - compassRadius - 10, "N");
-
-  // Calculate relative bearing (bearing - heading)
-  const relativeBearing =
-    ((compassInfo.bearing - compassInfo.heading) * Math.PI) / 180;
-
-  // Draw bearing arrow
-  const arrowLength = compassRadius - 6;
-  const arrowX = compassX + Math.sin(relativeBearing) * arrowLength;
-  const arrowY = compassY - Math.cos(relativeBearing) * arrowLength;
-
-  display.drawLine(compassX, compassY, arrowX, arrowY);
-
-  // Draw arrowhead
-  const headAngle = 0.4;
-  const headLength = 8;
-  const angle1 = relativeBearing + Math.PI - headAngle;
-  const angle2 = relativeBearing + Math.PI + headAngle;
-  display.drawLine(
-    arrowX,
-    arrowY,
-    arrowX + Math.sin(angle1) * headLength,
-    arrowY - Math.cos(angle1) * headLength,
-  );
-  display.drawLine(
-    arrowX,
-    arrowY,
-    arrowX + Math.sin(angle2) * headLength,
-    arrowY - Math.cos(angle2) * headLength,
-  );
-
-  // Draw distance at bottom
-  if (compassInfo.distance !== undefined) {
-    let distStr: string;
-    if (compassInfo.distance >= 1000) {
-      distStr = `${(compassInfo.distance / 1000).toFixed(1)} km`;
-    } else {
-      distStr = `${Math.round(compassInfo.distance)} m`;
-    }
-    display.drawString(compassX, screenH - FONT_HEIGHT_SMALL, distStr);
-  }
-
-  display.setTextAlignment(TEXT_ALIGN_LEFT);
-}
-
-/**
- * Draw a progress/loading screen
- */
-export function drawProgressScreen(
-  display: OLEDDisplay,
-  title: string,
-  progress: number,
-  statusText?: string,
-): void {
-  display.clear();
-  display.setFont(Font_6x8);
-  display.setColor(WHITE);
-  display.setTextAlignment(TEXT_ALIGN_CENTER);
-
-  const screenW = display.getWidth();
-  const screenH = display.getHeight();
-  const centerX = screenW / 2;
-  const centerY = screenH / 2;
-
-  // Title
-  display.drawString(centerX, centerY - 20, title);
-
-  // Progress bar
-  const barWidth = screenW - 20;
-  const barHeight = 10;
-  const barX = 10;
-  const barY = centerY - barHeight / 2;
-
-  display.drawProgressBar(barX, barY, barWidth, barHeight, progress);
-
-  // Progress percentage
-  display.drawString(centerX, barY + barHeight + 4, `${Math.round(progress)}%`);
-
-  // Status text
-  if (statusText) {
-    display.drawString(centerX, screenH - FONT_HEIGHT_SMALL - 2, statusText);
-  }
-
-  display.setTextAlignment(TEXT_ALIGN_LEFT);
-}

oled-emulator/src/SimpleFonts.ts

@@ -1,421 +0,0 @@
-/**
- * SimpleFonts.ts - Simple working bitmap fonts for OLED emulator
- *
- * These are basic monospace bitmap fonts that are easy to render correctly.
- * Format: Each character is stored in column-major order, 1 byte per column.
- * For fonts taller than 8px, multiple bytes per column are used.
- */
-
-import type { OLEDFont } from "./OLEDDisplay";
-
-/**
- * Simple 6x8 monospace font
- * Each character is 6 columns wide, 8 rows tall
- * 1 byte per column (8 vertical pixels)
- * Includes ASCII 32-126
- */
-export const Font_6x8: OLEDFont = {
-  height: 8,
-  firstChar: 32,
-  charCount: 95,
-  widths: new Array(95).fill(6), // Fixed width font
-  data: new Uint8Array([
-    // Space (32)
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    // ! (33)
-    0x00, 0x00, 0x5f, 0x00, 0x00, 0x00,
-    // " (34)
-    0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
-    // # (35)
-    0x14, 0x7f, 0x14, 0x7f, 0x14, 0x00,
-    // $ (36)
-    0x24, 0x2a, 0x7f, 0x2a, 0x12, 0x00,
-    // % (37)
-    0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
-    // & (38)
-    0x36, 0x49, 0x55, 0x22, 0x50, 0x00,
-    // ' (39)
-    0x00, 0x05, 0x03, 0x00, 0x00, 0x00,
-    // ( (40)
-    0x00, 0x1c, 0x22, 0x41, 0x00, 0x00,
-    // ) (41)
-    0x00, 0x41, 0x22, 0x1c, 0x00, 0x00,
-    // * (42)
-    0x08, 0x2a, 0x1c, 0x2a, 0x08, 0x00,
-    // + (43)
-    0x08, 0x08, 0x3e, 0x08, 0x08, 0x00,
-    // , (44)
-    0x00, 0x50, 0x30, 0x00, 0x00, 0x00,
-    // - (45)
-    0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
-    // . (46)
-    0x00, 0x60, 0x60, 0x00, 0x00, 0x00,
-    // / (47)
-    0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
-    // 0 (48)
-    0x3e, 0x51, 0x49, 0x45, 0x3e, 0x00,
-    // 1 (49)
-    0x00, 0x42, 0x7f, 0x40, 0x00, 0x00,
-    // 2 (50)
-    0x42, 0x61, 0x51, 0x49, 0x46, 0x00,
-    // 3 (51)
-    0x21, 0x41, 0x45, 0x4b, 0x31, 0x00,
-    // 4 (52)
-    0x18, 0x14, 0x12, 0x7f, 0x10, 0x00,
-    // 5 (53)
-    0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
-    // 6 (54)
-    0x3c, 0x4a, 0x49, 0x49, 0x30, 0x00,
-    // 7 (55)
-    0x01, 0x71, 0x09, 0x05, 0x03, 0x00,
-    // 8 (56)
-    0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
-    // 9 (57)
-    0x06, 0x49, 0x49, 0x29, 0x1e, 0x00,
-    // : (58)
-    0x00, 0x36, 0x36, 0x00, 0x00, 0x00,
-    // ; (59)
-    0x00, 0x56, 0x36, 0x00, 0x00, 0x00,
-    // < (60)
-    0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
-    // = (61)
-    0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
-    // > (62)
-    0x41, 0x22, 0x14, 0x08, 0x00, 0x00,
-    // ? (63)
-    0x02, 0x01, 0x51, 0x09, 0x06, 0x00,
-    // @ (64)
-    0x32, 0x49, 0x79, 0x41, 0x3e, 0x00,
-    // A (65)
-    0x7e, 0x11, 0x11, 0x11, 0x7e, 0x00,
-    // B (66)
-    0x7f, 0x49, 0x49, 0x49, 0x36, 0x00,
-    // C (67)
-    0x3e, 0x41, 0x41, 0x41, 0x22, 0x00,
-    // D (68)
-    0x7f, 0x41, 0x41, 0x22, 0x1c, 0x00,
-    // E (69)
-    0x7f, 0x49, 0x49, 0x49, 0x41, 0x00,
-    // F (70)
-    0x7f, 0x09, 0x09, 0x01, 0x01, 0x00,
-    // G (71)
-    0x3e, 0x41, 0x41, 0x51, 0x32, 0x00,
-    // H (72)
-    0x7f, 0x08, 0x08, 0x08, 0x7f, 0x00,
-    // I (73)
-    0x00, 0x41, 0x7f, 0x41, 0x00, 0x00,
-    // J (74)
-    0x20, 0x40, 0x41, 0x3f, 0x01, 0x00,
-    // K (75)
-    0x7f, 0x08, 0x14, 0x22, 0x41, 0x00,
-    // L (76)
-    0x7f, 0x40, 0x40, 0x40, 0x40, 0x00,
-    // M (77)
-    0x7f, 0x02, 0x04, 0x02, 0x7f, 0x00,
-    // N (78)
-    0x7f, 0x04, 0x08, 0x10, 0x7f, 0x00,
-    // O (79)
-    0x3e, 0x41, 0x41, 0x41, 0x3e, 0x00,
-    // P (80)
-    0x7f, 0x09, 0x09, 0x09, 0x06, 0x00,
-    // Q (81)
-    0x3e, 0x41, 0x51, 0x21, 0x5e, 0x00,
-    // R (82)
-    0x7f, 0x09, 0x19, 0x29, 0x46, 0x00,
-    // S (83)
-    0x46, 0x49, 0x49, 0x49, 0x31, 0x00,
-    // T (84)
-    0x01, 0x01, 0x7f, 0x01, 0x01, 0x00,
-    // U (85)
-    0x3f, 0x40, 0x40, 0x40, 0x3f, 0x00,
-    // V (86)
-    0x1f, 0x20, 0x40, 0x20, 0x1f, 0x00,
-    // W (87)
-    0x7f, 0x20, 0x18, 0x20, 0x7f, 0x00,
-    // X (88)
-    0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
-    // Y (89)
-    0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
-    // Z (90)
-    0x61, 0x51, 0x49, 0x45, 0x43, 0x00,
-    // [ (91)
-    0x00, 0x00, 0x7f, 0x41, 0x41, 0x00,
-    // \ (92)
-    0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
-    // ] (93)
-    0x41, 0x41, 0x7f, 0x00, 0x00, 0x00,
-    // ^ (94)
-    0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
-    // _ (95)
-    0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
-    // ` (96)
-    0x00, 0x01, 0x02, 0x04, 0x00, 0x00,
-    // a (97)
-    0x20, 0x54, 0x54, 0x54, 0x78, 0x00,
-    // b (98)
-    0x7f, 0x48, 0x44, 0x44, 0x38, 0x00,
-    // c (99)
-    0x38, 0x44, 0x44, 0x44, 0x20, 0x00,
-    // d (100)
-    0x38, 0x44, 0x44, 0x48, 0x7f, 0x00,
-    // e (101)
-    0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
-    // f (102)
-    0x08, 0x7e, 0x09, 0x01, 0x02, 0x00,
-    // g (103)
-    0x08, 0x14, 0x54, 0x54, 0x3c, 0x00,
-    // h (104)
-    0x7f, 0x08, 0x04, 0x04, 0x78, 0x00,
-    // i (105)
-    0x00, 0x44, 0x7d, 0x40, 0x00, 0x00,
-    // j (106)
-    0x20, 0x40, 0x44, 0x3d, 0x00, 0x00,
-    // k (107)
-    0x00, 0x7f, 0x10, 0x28, 0x44, 0x00,
-    // l (108)
-    0x00, 0x41, 0x7f, 0x40, 0x00, 0x00,
-    // m (109)
-    0x7c, 0x04, 0x18, 0x04, 0x78, 0x00,
-    // n (110)
-    0x7c, 0x08, 0x04, 0x04, 0x78, 0x00,
-    // o (111)
-    0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
-    // p (112)
-    0x7c, 0x14, 0x14, 0x14, 0x08, 0x00,
-    // q (113)
-    0x08, 0x14, 0x14, 0x18, 0x7c, 0x00,
-    // r (114)
-    0x7c, 0x08, 0x04, 0x04, 0x08, 0x00,
-    // s (115)
-    0x48, 0x54, 0x54, 0x54, 0x20, 0x00,
-    // t (116)
-    0x04, 0x3f, 0x44, 0x40, 0x20, 0x00,
-    // u (117)
-    0x3c, 0x40, 0x40, 0x20, 0x7c, 0x00,
-    // v (118)
-    0x1c, 0x20, 0x40, 0x20, 0x1c, 0x00,
-    // w (119)
-    0x3c, 0x40, 0x30, 0x40, 0x3c, 0x00,
-    // x (120)
-    0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
-    // y (121)
-    0x0c, 0x50, 0x50, 0x50, 0x3c, 0x00,
-    // z (122)
-    0x44, 0x64, 0x54, 0x4c, 0x44, 0x00,
-    // { (123)
-    0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
-    // | (124)
-    0x00, 0x00, 0x7f, 0x00, 0x00, 0x00,
-    // } (125)
-    0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
-    // ~ (126)
-    0x08, 0x08, 0x2a, 0x1c, 0x08, 0x00,
-  ]),
-};
-
-/**
- * Simple 5x7 monospace font (more compact)
- * Each character is 5 columns wide, 7 rows tall
- * 1 byte per column
- */
-export const Font_5x7: OLEDFont = {
-  height: 7,
-  firstChar: 32,
-  charCount: 95,
-  widths: new Array(95).fill(5),
-  data: new Uint8Array([
-    // Space (32)
-    0x00, 0x00, 0x00, 0x00, 0x00,
-    // ! (33)
-    0x00, 0x00, 0x2f, 0x00, 0x00,
-    // " (34)
-    0x00, 0x07, 0x00, 0x07, 0x00,
-    // # (35)
-    0x14, 0x3e, 0x14, 0x3e, 0x14,
-    // $ (36)
-    0x24, 0x2a, 0x7f, 0x2a, 0x12,
-    // % (37)
-    0x23, 0x13, 0x08, 0x64, 0x62,
-    // & (38)
-    0x36, 0x49, 0x55, 0x22, 0x50,
-    // ' (39)
-    0x00, 0x05, 0x03, 0x00, 0x00,
-    // ( (40)
-    0x00, 0x1c, 0x22, 0x41, 0x00,
-    // ) (41)
-    0x00, 0x41, 0x22, 0x1c, 0x00,
-    // * (42)
-    0x14, 0x08, 0x3e, 0x08, 0x14,
-    // + (43)
-    0x08, 0x08, 0x3e, 0x08, 0x08,
-    // , (44)
-    0x00, 0x50, 0x30, 0x00, 0x00,
-    // - (45)
-    0x08, 0x08, 0x08, 0x08, 0x08,
-    // . (46)
-    0x00, 0x30, 0x30, 0x00, 0x00,
-    // / (47)
-    0x20, 0x10, 0x08, 0x04, 0x02,
-    // 0 (48)
-    0x3e, 0x51, 0x49, 0x45, 0x3e,
-    // 1 (49)
-    0x00, 0x42, 0x7f, 0x40, 0x00,
-    // 2 (50)
-    0x42, 0x61, 0x51, 0x49, 0x46,
-    // 3 (51)
-    0x21, 0x41, 0x45, 0x4b, 0x31,
-    // 4 (52)
-    0x18, 0x14, 0x12, 0x7f, 0x10,
-    // 5 (53)
-    0x27, 0x45, 0x45, 0x45, 0x39,
-    // 6 (54)
-    0x3c, 0x4a, 0x49, 0x49, 0x30,
-    // 7 (55)
-    0x01, 0x71, 0x09, 0x05, 0x03,
-    // 8 (56)
-    0x36, 0x49, 0x49, 0x49, 0x36,
-    // 9 (57)
-    0x06, 0x49, 0x49, 0x29, 0x1e,
-    // : (58)
-    0x00, 0x36, 0x36, 0x00, 0x00,
-    // ; (59)
-    0x00, 0x56, 0x36, 0x00, 0x00,
-    // < (60)
-    0x08, 0x14, 0x22, 0x41, 0x00,
-    // = (61)
-    0x14, 0x14, 0x14, 0x14, 0x14,
-    // > (62)
-    0x00, 0x41, 0x22, 0x14, 0x08,
-    // ? (63)
-    0x02, 0x01, 0x51, 0x09, 0x06,
-    // @ (64)
-    0x32, 0x49, 0x79, 0x41, 0x3e,
-    // A (65)
-    0x7e, 0x11, 0x11, 0x11, 0x7e,
-    // B (66)
-    0x7f, 0x49, 0x49, 0x49, 0x36,
-    // C (67)
-    0x3e, 0x41, 0x41, 0x41, 0x22,
-    // D (68)
-    0x7f, 0x41, 0x41, 0x22, 0x1c,
-    // E (69)
-    0x7f, 0x49, 0x49, 0x49, 0x41,
-    // F (70)
-    0x7f, 0x09, 0x09, 0x09, 0x01,
-    // G (71)
-    0x3e, 0x41, 0x49, 0x49, 0x7a,
-    // H (72)
-    0x7f, 0x08, 0x08, 0x08, 0x7f,
-    // I (73)
-    0x00, 0x41, 0x7f, 0x41, 0x00,
-    // J (74)
-    0x20, 0x40, 0x41, 0x3f, 0x01,
-    // K (75)
-    0x7f, 0x08, 0x14, 0x22, 0x41,
-    // L (76)
-    0x7f, 0x40, 0x40, 0x40, 0x40,
-    // M (77)
-    0x7f, 0x02, 0x0c, 0x02, 0x7f,
-    // N (78)
-    0x7f, 0x04, 0x08, 0x10, 0x7f,
-    // O (79)
-    0x3e, 0x41, 0x41, 0x41, 0x3e,
-    // P (80)
-    0x7f, 0x09, 0x09, 0x09, 0x06,
-    // Q (81)
-    0x3e, 0x41, 0x51, 0x21, 0x5e,
-    // R (82)
-    0x7f, 0x09, 0x19, 0x29, 0x46,
-    // S (83)
-    0x46, 0x49, 0x49, 0x49, 0x31,
-    // T (84)
-    0x01, 0x01, 0x7f, 0x01, 0x01,
-    // U (85)
-    0x3f, 0x40, 0x40, 0x40, 0x3f,
-    // V (86)
-    0x1f, 0x20, 0x40, 0x20, 0x1f,
-    // W (87)
-    0x3f, 0x40, 0x38, 0x40, 0x3f,
-    // X (88)
-    0x63, 0x14, 0x08, 0x14, 0x63,
-    // Y (89)
-    0x07, 0x08, 0x70, 0x08, 0x07,
-    // Z (90)
-    0x61, 0x51, 0x49, 0x45, 0x43,
-    // [ (91)
-    0x00, 0x7f, 0x41, 0x41, 0x00,
-    // \ (92)
-    0x02, 0x04, 0x08, 0x10, 0x20,
-    // ] (93)
-    0x00, 0x41, 0x41, 0x7f, 0x00,
-    // ^ (94)
-    0x04, 0x02, 0x01, 0x02, 0x04,
-    // _ (95)
-    0x40, 0x40, 0x40, 0x40, 0x40,
-    // ` (96)
-    0x00, 0x01, 0x02, 0x04, 0x00,
-    // a (97)
-    0x20, 0x54, 0x54, 0x54, 0x78,
-    // b (98)
-    0x7f, 0x48, 0x44, 0x44, 0x38,
-    // c (99)
-    0x38, 0x44, 0x44, 0x44, 0x20,
-    // d (100)
-    0x38, 0x44, 0x44, 0x48, 0x7f,
-    // e (101)
-    0x38, 0x54, 0x54, 0x54, 0x18,
-    // f (102)
-    0x08, 0x7e, 0x09, 0x01, 0x02,
-    // g (103)
-    0x0c, 0x52, 0x52, 0x52, 0x3e,
-    // h (104)
-    0x7f, 0x08, 0x04, 0x04, 0x78,
-    // i (105)
-    0x00, 0x44, 0x7d, 0x40, 0x00,
-    // j (106)
-    0x20, 0x40, 0x44, 0x3d, 0x00,
-    // k (107)
-    0x7f, 0x10, 0x28, 0x44, 0x00,
-    // l (108)
-    0x00, 0x41, 0x7f, 0x40, 0x00,
-    // m (109)
-    0x7c, 0x04, 0x18, 0x04, 0x78,
-    // n (110)
-    0x7c, 0x08, 0x04, 0x04, 0x78,
-    // o (111)
-    0x38, 0x44, 0x44, 0x44, 0x38,
-    // p (112)
-    0x7c, 0x14, 0x14, 0x14, 0x08,
-    // q (113)
-    0x08, 0x14, 0x14, 0x18, 0x7c,
-    // r (114)
-    0x7c, 0x08, 0x04, 0x04, 0x08,
-    // s (115)
-    0x48, 0x54, 0x54, 0x54, 0x20,
-    // t (116)
-    0x04, 0x3f, 0x44, 0x40, 0x20,
-    // u (117)
-    0x3c, 0x40, 0x40, 0x20, 0x7c,
-    // v (118)
-    0x1c, 0x20, 0x40, 0x20, 0x1c,
-    // w (119)
-    0x3c, 0x40, 0x30, 0x40, 0x3c,
-    // x (120)
-    0x44, 0x28, 0x10, 0x28, 0x44,
-    // y (121)
-    0x0c, 0x50, 0x50, 0x50, 0x3c,
-    // z (122)
-    0x44, 0x64, 0x54, 0x4c, 0x44,
-    // { (123)
-    0x00, 0x08, 0x36, 0x41, 0x00,
-    // | (124)
-    0x00, 0x00, 0x7f, 0x00, 0x00,
-    // } (125)
-    0x00, 0x41, 0x36, 0x08, 0x00,
-    // ~ (126)
-    0x10, 0x08, 0x08, 0x10, 0x08,
-  ]),
-};
-
-// Alias for compatibility
-export const SimpleFont = Font_6x8;

oled-emulator/src/index.ts

@@ -1,50 +0,0 @@
-/**
- * Meshtastic OLED Emulator
- *
- * A Vue.js component and TypeScript library for emulating SSD1306/SH1106 OLED displays.
- * Provides the same OLEDDisplay API as the Meshtastic firmware, enabling
- * screen development and testing in the browser.
- */
-
-// Core display class
-export {
-  OLEDDisplay,
-  type OLEDDISPLAY_GEOMETRY,
-  type OLEDDISPLAY_COLOR,
-  type OLEDDISPLAY_TEXT_ALIGNMENT,
-  type OLEDFont,
-} from "./OLEDDisplay";
-export {
-  WHITE,
-  BLACK,
-  INVERSE,
-  TEXT_ALIGN_LEFT,
-  TEXT_ALIGN_CENTER,
-  TEXT_ALIGN_RIGHT,
-} from "./OLEDDisplay";
-
-// Fonts
-export {
-  ArialMT_Plain_10,
-  ArialMT_Plain_16,
-  FONT_HEIGHT_SMALL,
-  FONT_HEIGHT_MEDIUM,
-  FONT_HEIGHT_LARGE,
-  createFontFromBytes,
-} from "./OLEDFonts";
-
-// Simple working fonts (recommended)
-export { Font_6x8, Font_5x7, SimpleFont } from "./SimpleFonts";
-
-// Images and icons
-export * as OLEDImages from "./OLEDImages";
-
-// Screen renderers (firmware UI ports)
-export * as ScreenRenderers from "./ScreenRenderers";
-
-// Vue component
-export { default as OLEDEmulator } from "./OLEDEmulator.vue";
-export { DISPLAY_PRESETS, type DisplayPreset } from "./DisplayPresets";
-
-// Demo component
-export { default as OLEDEmulatorDemo } from "./Demo.vue";

oled-emulator/src/main.ts

@@ -1,4 +0,0 @@
-import { createApp } from "vue";
-import Demo from "./Demo.vue";
-
-createApp(Demo).mount("#app");

oled-emulator/tsconfig.json

@@ -1,28 +0,0 @@
-{
-  "compilerOptions": {
-    "target": "ES2020",
-    "useDefineForClassFields": true,
-    "module": "ESNext",
-    "lib": ["ES2020", "DOM", "DOM.Iterable"],
-    "skipLibCheck": true,
-
-    /* Bundler mode */
-    "moduleResolution": "bundler",
-    "allowImportingTsExtensions": true,
-    "resolveJsonModule": true,
-    "isolatedModules": true,
-    "noEmit": true,
-    "jsx": "preserve",
-
-    /* Linting */
-    "strict": true,
-    "noUnusedLocals": true,
-    "noUnusedParameters": true,
-    "noFallthroughCasesInSwitch": true,
-
-    /* Vue */
-    "types": ["vite/client"]
-  },
-  "include": ["src/**/*.ts", "src/**/*.tsx", "src/**/*.vue"],
-  "exclude": ["node_modules", "dist"]
-}

oled-emulator/vite.config.ts

@@ -1,35 +0,0 @@
-import { defineConfig } from "vite";
-import vue from "@vitejs/plugin-vue";
-import dts from "vite-plugin-dts";
-import { resolve } from "path";
-
-export default defineConfig({
-  plugins: [
-    vue(),
-    dts({
-      insertTypesEntry: true,
-    }),
-  ],
-  build: {
-    lib: {
-      entry: resolve(__dirname, "src/index.ts"),
-      name: "MeshtasticOLEDEmulator",
-      formats: ["es", "cjs"],
-      fileName: (format) => `index.${format === "es" ? "mjs" : "js"}`,
-    },
-    rollupOptions: {
-      external: ["vue"],
-      output: {
-        globals: {
-          vue: "Vue",
-        },
-      },
-    },
-    cssCodeSplit: false,
-  },
-  resolve: {
-    alias: {
-      "@": resolve(__dirname, "src"),
-    },
-  },
-});

platformio.ini

@@ -50,15 +50,11 @@ build_flags = -Wno-missing-field-initializers
 	-DRADIOLIB_EXCLUDE_APRS=1
 	-DRADIOLIB_EXCLUDE_LORAWAN=1
 	-DMESHTASTIC_EXCLUDE_DROPZONE=1
-	-DMESHTASTIC_EXCLUDE_REPLYBOT=1
 	-DMESHTASTIC_EXCLUDE_REMOTEHARDWARE=1
 	-DMESHTASTIC_EXCLUDE_HEALTH_TELEMETRY=1
 	-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
 	-DMESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE=1
-	-DMESHTASTIC_EXCLUDE_POWERMON=1
-	-DMESHTASTIC_EXCLUDE_STATUS=1
 	-D MAX_THREADS=40 ; As we've split modules, we have more threads to manage
-	-DLED_BUILTIN=-1
 	#-DBUILD_EPOCH=$UNIX_TIME ; set in platformio-custom.py now
 	#-D OLED_PL=1
 	#-D DEBUG_HEAP=1 ; uncomment to add free heap space / memory leak debugging logs
@@ -68,7 +64,7 @@ monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/21e484f409cde18d44012caef84c244eb5ca28f3.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/2887bf4a19f64d92c984dcc8fd5ca7429e425e4a.zip
 	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
 	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
@@ -107,22 +103,27 @@ lib_deps =
 	thingsboard/TBPubSubClient@2.12.1
 	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
 	arduino-libraries/NTPClient@3.2.1
-
-; Extra TCP/IP networking libs for supported devices
-[networking_extra]
-lib_deps =
 	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
 	arcao/Syslog@2.0.0
 
+; Minimal networking libs for nrf52 (excludes Syslog to save flash)
+[nrf52_networking_base]
+lib_deps =
+	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
+	thingsboard/TBPubSubClient@2.12.1
+	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
+	arduino-libraries/NTPClient@3.2.1
+
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	jgromes/RadioLib@7.5.0
+	# jgromes/RadioLib@7.4.0
+	https://github.com/jgromes/RadioLib/archive/536c7267362e2c1345be7054ba45e503252975ff.zip
 
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/6c75195e9987b7a49563232234f2f868dd343cae.zip
+	https://github.com/meshtastic/device-ui/archive/4fb5f24787caa841b58dbf623a52c4c5861d6722.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -132,7 +133,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit Unified Sensor packageName=adafruit/library/Adafruit Unified Sensor
 	adafruit/Adafruit Unified Sensor@1.1.15
 	# renovate: datasource=custom.pio depName=Adafruit BMP280 packageName=adafruit/library/Adafruit BMP280 Library
-	adafruit/Adafruit BMP280 Library@3.0.0
+	adafruit/Adafruit BMP280 Library@2.6.8
 	# renovate: datasource=custom.pio depName=Adafruit BMP085 packageName=adafruit/library/Adafruit BMP085 Library
 	adafruit/Adafruit BMP085 Library@1.2.4
 	# renovate: datasource=custom.pio depName=Adafruit BME280 packageName=adafruit/library/Adafruit BME280 Library
@@ -145,8 +146,10 @@ lib_deps =
 	adafruit/Adafruit INA260 Library@1.5.3
 	# renovate: datasource=custom.pio depName=Adafruit INA219 packageName=adafruit/library/Adafruit INA219
 	adafruit/Adafruit INA219@1.2.3
+	# renovate: datasource=custom.pio depName=Adafruit PM25 AQI Sensor packageName=adafruit/library/Adafruit PM25 AQI Sensor
+	adafruit/Adafruit PM25 AQI Sensor@2.0.0
 	# renovate: datasource=custom.pio depName=Adafruit MPU6050 packageName=adafruit/library/Adafruit MPU6050
-	adafruit/Adafruit MPU6050@2.2.9
+	adafruit/Adafruit MPU6050@2.2.6
 	# renovate: datasource=custom.pio depName=Adafruit LIS3DH packageName=adafruit/library/Adafruit LIS3DH
 	adafruit/Adafruit LIS3DH@1.3.0
 	# renovate: datasource=custom.pio depName=Adafruit AHTX0 packageName=adafruit/library/Adafruit AHTX0
@@ -159,8 +162,8 @@ lib_deps =
 	emotibit/EmotiBit MLX90632@1.0.8
 	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
 	adafruit/Adafruit MLX90614 Library@2.1.5
-	# renovate: datasource=git-refs depName=INA3221 packageName=https://github.com/sgtwilko/INA3221 gitBranch=FixOverflow
+	# renovate: datasource=github-tags depName=INA3221 packageName=sgtwilko/INA3221
-	https://github.com/sgtwilko/INA3221/archive/bb03d7e9bfcc74fc798838a54f4f99738f29fc6a.zip
+	https://github.com/sgtwilko/INA3221#bb03d7e9bfcc74fc798838a54f4f99738f29fc6a
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
 	mprograms/QMC5883LCompass@1.2.3
 	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
@@ -168,7 +171,7 @@ lib_deps =
 	# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
 	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
 	# renovate: datasource=custom.pio depName=INA226 packageName=robtillaart/library/INA226
-	robtillaart/INA226@0.6.6
+	robtillaart/INA226@0.6.5
 	# renovate: datasource=custom.pio depName=SparkFun MAX3010x packageName=sparkfun/library/SparkFun MAX3010x Pulse and Proximity Sensor Library
 	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2
 	# renovate: datasource=custom.pio depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/library/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library
@@ -212,38 +215,6 @@ lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
 	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
 	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
-	sensirion/Sensirion Core@0.7.3
+	sensirion/Sensirion Core@0.7.2
 	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
 	sensirion/Sensirion I2C SCD4x@1.1.0
-	# renovate: datasource=custom.pio depName=Sensirion I2C SFA3x packageName=sensirion/library/Sensirion I2C SFA3x
-	sensirion/Sensirion I2C SFA3x@1.0.0
-
-; Same as environmental_extra but without BSEC (saves ~3.5KB DRAM for original ESP32 targets)
-[environmental_extra_no_bsec]
-lib_deps =
-	# renovate: datasource=custom.pio depName=Adafruit BMP3XX packageName=adafruit/library/Adafruit BMP3XX Library
-	adafruit/Adafruit BMP3XX Library@2.1.6
-	# renovate: datasource=custom.pio depName=Adafruit MAX1704X packageName=adafruit/library/Adafruit MAX1704X
-	adafruit/Adafruit MAX1704X@1.0.3
-	# renovate: datasource=custom.pio depName=Adafruit SHTC3 packageName=adafruit/library/Adafruit SHTC3 Library
-	adafruit/Adafruit SHTC3 Library@1.0.2
-	# renovate: datasource=custom.pio depName=Adafruit LPS2X packageName=adafruit/library/Adafruit LPS2X
-	adafruit/Adafruit LPS2X@2.0.6
-	# renovate: datasource=custom.pio depName=Adafruit SHT31 packageName=adafruit/library/Adafruit SHT31 Library
-	adafruit/Adafruit SHT31 Library@2.2.2
-	# renovate: datasource=custom.pio depName=Adafruit VEML7700 packageName=adafruit/library/Adafruit VEML7700 Library
-	adafruit/Adafruit VEML7700 Library@2.1.6
-	# renovate: datasource=custom.pio depName=Adafruit SHT4x packageName=adafruit/library/Adafruit SHT4x Library
-	adafruit/Adafruit SHT4x Library@1.0.5
-	# renovate: datasource=custom.pio depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/library/SparkFun Qwiic Scale NAU7802 Arduino Library
-	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
-	# renovate: datasource=custom.pio depName=ClosedCube OPT3001 packageName=closedcube/library/ClosedCube OPT3001
-	closedcube/ClosedCube OPT3001@1.1.2
-	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
-	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
-	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
-	sensirion/Sensirion Core@0.7.3
-	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
-	sensirion/Sensirion I2C SCD4x@1.1.0
-  # renovate: datasource=custom.pio depName=Sensirion I2C SFA3x packageName=sensirion/library/Sensirion I2C SFA3x
-	sensirion/Sensirion I2C SFA3x@1.0.0

shell.nix

@@ -1,12 +0,0 @@
-(import (
-  let
-    lock = builtins.fromJSON (builtins.readFile ./flake.lock);
-    nodeName = lock.nodes.root.inputs.flake-compat;
-  in
-  fetchTarball {
-    url =
-      lock.nodes.${nodeName}.locked.url
-        or "https://github.com/NixOS/flake-compat/archive/${lock.nodes.${nodeName}.locked.rev}.tar.gz";
-    sha256 = lock.nodes.${nodeName}.locked.narHash;
-  }
-) { src = ./.; }).shellNix

src/AmbientLightingThread.h

@@ -1,21 +1,19 @@
-#ifndef AMBIENTLIGHTINGTHREAD_H
-#define AMBIENTLIGHTINGTHREAD_H
-
 #include "Observer.h"
 #include "configuration.h"
-#include "detect/ScanI2C.h"
-#include "sleep.h"
 
 #ifdef HAS_NCP5623
-#include <NCP5623.h>
+#include <graphics/RAKled.h>
+NCP5623 rgb;
 #endif
 
 #ifdef HAS_LP5562
 #include <graphics/NomadStarLED.h>
+LP5562 rgbw;
 #endif
 
 #ifdef HAS_NEOPIXEL
-#include <Adafruit_NeoPixel.h>
+#include <graphics/NeoPixel.h>
+Adafruit_NeoPixel pixels(NEOPIXEL_COUNT, NEOPIXEL_DATA, NEOPIXEL_TYPE);
 #endif
 
 #ifdef UNPHONE
@@ -23,24 +21,10 @@
 extern unPhone unphone;
 #endif
 
+namespace concurrency
+{
 class AmbientLightingThread : public concurrency::OSThread
 {
-    friend class StatusLEDModule; // Let the LEDStatusModule trigger the ambient lighting for notifications and battery status.
-    friend class ExternalNotificationModule; // Let the ExternalNotificationModule trigger the ambient lighting for notifications.
-
-  private:
-#ifdef HAS_NCP5623
-    NCP5623 rgb;
-#endif
-
-#ifdef HAS_LP5562
-    LP5562 rgbw;
-#endif
-
-#ifdef HAS_NEOPIXEL
-    Adafruit_NeoPixel pixels = Adafruit_NeoPixel(NEOPIXEL_COUNT, NEOPIXEL_DATA, NEOPIXEL_TYPE);
-#endif
-
   public:
     explicit AmbientLightingThread(ScanI2C::DeviceType type) : OSThread("AmbientLighting")
     {
@@ -52,15 +36,14 @@ class AmbientLightingThread : public concurrency::OSThread
         moduleConfig.ambient_lighting.led_state = true;
 #endif
 #endif
-#if AMBIENT_LIGHTING_TEST
+        // Uncomment to test module
-        // define to enable test
+        // moduleConfig.ambient_lighting.led_state = true;
-        moduleConfig.ambient_lighting.led_state = true;
+        // moduleConfig.ambient_lighting.current = 10;
-        moduleConfig.ambient_lighting.current = 10;
         // Default to a color based on our node number
-        moduleConfig.ambient_lighting.red = (myNodeInfo.my_node_num & 0xFF0000) >> 16;
+        // moduleConfig.ambient_lighting.red = (myNodeInfo.my_node_num & 0xFF0000) >> 16;
-        moduleConfig.ambient_lighting.green = (myNodeInfo.my_node_num & 0x00FF00) >> 8;
+        // moduleConfig.ambient_lighting.green = (myNodeInfo.my_node_num & 0x00FF00) >> 8;
-        moduleConfig.ambient_lighting.blue = myNodeInfo.my_node_num & 0x0000FF;
+        // moduleConfig.ambient_lighting.blue = myNodeInfo.my_node_num & 0x0000FF;
-#endif
+
 #if defined(HAS_NCP5623) || defined(HAS_LP5562)
         _type = type;
         if (_type == ScanI2C::DeviceType::NONE) {
@@ -70,6 +53,11 @@ class AmbientLightingThread : public concurrency::OSThread
         }
 #endif
 #ifdef HAS_RGB_LED
+        if (!moduleConfig.ambient_lighting.led_state) {
+            LOG_DEBUG("AmbientLighting Disable due to moduleConfig.ambient_lighting.led_state OFF");
+            disable();
+            return;
+        }
         LOG_DEBUG("AmbientLighting init");
 #ifdef HAS_NCP5623
         if (_type == ScanI2C::NCP5623) {
@@ -89,13 +77,7 @@ class AmbientLightingThread : public concurrency::OSThread
                 pixels.clear(); // Set all pixel colors to 'off'
                 pixels.setBrightness(moduleConfig.ambient_lighting.current);
 #endif
-                if (!moduleConfig.ambient_lighting.led_state) {
+                setLighting();
-                    LOG_DEBUG("AmbientLighting Disable due to moduleConfig.ambient_lighting.led_state OFF");
-                    disable();
-                    return;
-                }
-                setLighting(moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
-                            moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #if defined(HAS_NCP5623) || defined(HAS_LP5562)
             }
@@ -109,8 +91,7 @@ class AmbientLightingThread : public concurrency::OSThread
 #if defined(HAS_NCP5623) || defined(HAS_LP5562)
             if ((_type == ScanI2C::NCP5623 || _type == ScanI2C::LP5562) && moduleConfig.ambient_lighting.led_state) {
 #endif
-                setLighting(moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
+                setLighting();
-                            moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
                 return 30000; // 30 seconds to reset from any animations that may have been running from Ext. Notification
 #if defined(HAS_NCP5623) || defined(HAS_LP5562)
             }
@@ -167,53 +148,65 @@ class AmbientLightingThread : public concurrency::OSThread
             return 0;
         }
 
-      protected:
+        void setLighting()
-        void setLighting(float current, uint8_t red, uint8_t green, uint8_t blue)
         {
 #ifdef HAS_NCP5623
-            rgb.setCurrent(current);
+            rgb.setCurrent(moduleConfig.ambient_lighting.current);
-            rgb.setRed(red);
+            rgb.setRed(moduleConfig.ambient_lighting.red);
-            rgb.setGreen(green);
+            rgb.setGreen(moduleConfig.ambient_lighting.green);
-            rgb.setBlue(blue);
+            rgb.setBlue(moduleConfig.ambient_lighting.blue);
-            LOG_DEBUG("Init NCP5623 Ambient light w/ current=%f, red=%d, green=%d, blue=%d", current, red, green, blue);
+            LOG_DEBUG("Init NCP5623 Ambient light w/ current=%d, red=%d, green=%d, blue=%d",
+                      moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef HAS_LP5562
-            rgbw.setCurrent(current);
+            rgbw.setCurrent(moduleConfig.ambient_lighting.current);
-            rgbw.setRed(red);
+            rgbw.setRed(moduleConfig.ambient_lighting.red);
-            rgbw.setGreen(green);
+            rgbw.setGreen(moduleConfig.ambient_lighting.green);
-            rgbw.setBlue(blue);
+            rgbw.setBlue(moduleConfig.ambient_lighting.blue);
-            LOG_DEBUG("Init LP5562 Ambient light w/ current=%f, red=%d, green=%d, blue=%d", current, red, green, blue);
+            LOG_DEBUG("Init LP5562 Ambient light w/ current=%d, red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.current,
+                      moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef HAS_NEOPIXEL
-            pixels.fill(pixels.Color(red, green, blue), 0, NEOPIXEL_COUNT);
+            pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                                     moduleConfig.ambient_lighting.blue),
+                        0, NEOPIXEL_COUNT);
 
 // RadioMaster Bandit has addressable LED at the two buttons
 // this allow us to set different lighting for them in variant.h file.
+#ifdef RADIOMASTER_900_BANDIT
 #if defined(BUTTON1_COLOR) && defined(BUTTON1_COLOR_INDEX)
             pixels.fill(BUTTON1_COLOR, BUTTON1_COLOR_INDEX, 1);
 #endif
 #if defined(BUTTON2_COLOR) && defined(BUTTON2_COLOR_INDEX)
             pixels.fill(BUTTON2_COLOR, BUTTON2_COLOR_INDEX, 1);
+#endif
 #endif
             pixels.show();
-            // LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%f, red=%d, green=%d, blue=%d",
+            // LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
-            //        current, red, green, blue);
+            //        moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
+            //        moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef RGBLED_CA
-            analogWrite(RGBLED_RED, 255 - red);
+            analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);
-            analogWrite(RGBLED_GREEN, 255 - green);
+            analogWrite(RGBLED_GREEN, 255 - moduleConfig.ambient_lighting.green);
-            analogWrite(RGBLED_BLUE, 255 - blue);
+            analogWrite(RGBLED_BLUE, 255 - moduleConfig.ambient_lighting.blue);
-            LOG_DEBUG("Init Ambient light RGB Common Anode w/ red=%d, green=%d, blue=%d", red, green, blue);
+            LOG_DEBUG("Init Ambient light RGB Common Anode w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #elif defined(RGBLED_RED)
-        analogWrite(RGBLED_RED, red);
+        analogWrite(RGBLED_RED, moduleConfig.ambient_lighting.red);
-        analogWrite(RGBLED_GREEN, green);
+        analogWrite(RGBLED_GREEN, moduleConfig.ambient_lighting.green);
-        analogWrite(RGBLED_BLUE, blue);
+        analogWrite(RGBLED_BLUE, moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Init Ambient light RGB Common Cathode w/ red=%d, green=%d, blue=%d", red, green, blue);
+        LOG_DEBUG("Init Ambient light RGB Common Cathode w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+                  moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef UNPHONE
-            unphone.rgb(red, green, blue);
+            unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
-            LOG_DEBUG("Init unPhone Ambient light w/ red=%d, green=%d, blue=%d", red, green, blue);
+                        moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init unPhone Ambient light w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
         }
     };
-#endif // AMBIENTLIGHTINGTHREAD_H
+
+} // namespace concurrency

src/BluetoothStatus.h

@@ -89,14 +89,22 @@ class BluetoothStatus : public Status
             case ConnectionState::CONNECTED:
                 LOG_DEBUG("BluetoothStatus CONNECTED");
 #ifdef BLE_LED
-                digitalWrite(BLE_LED, LED_STATE_ON);
+#ifdef BLE_LED_INVERTED
+                digitalWrite(BLE_LED, LOW);
+#else
+                digitalWrite(BLE_LED, HIGH);
+#endif
 #endif
                 break;
 
             case ConnectionState::DISCONNECTED:
                 LOG_DEBUG("BluetoothStatus DISCONNECTED");
 #ifdef BLE_LED
-                digitalWrite(BLE_LED, LED_STATE_OFF);
+#ifdef BLE_LED_INVERTED
+                digitalWrite(BLE_LED, HIGH);
+#else
+                digitalWrite(BLE_LED, LOW);
+#endif
 #endif
                 break;
             }

src/DebugConfiguration.cpp

@@ -41,8 +41,7 @@ extern "C" void logLegacy(const char *level, const char *fmt, ...)
 }
 
 #if HAS_NETWORKING
-namespace meshtastic
+
-{
 Syslog::Syslog(UDP &client)
 {
     this->_client = &client;
@@ -196,6 +195,4 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
     return true;
 }
 
-}; // namespace meshtastic
-
 #endif

src/DebugConfiguration.h

@@ -162,8 +162,6 @@ extern "C" void logLegacy(const char *level, const char *fmt, ...);
 
 #if HAS_NETWORKING
 
-namespace meshtastic
-{
 class Syslog
 {
   private:
@@ -197,6 +195,4 @@ class Syslog
     bool vlogf(uint16_t pri, const char *appName, const char *fmt, va_list args) __attribute__((format(printf, 3, 0)));
 };
 
-}; // namespace meshtastic
-
 #endif // HAS_NETWORKING

src/DisplayFormatters.cpp

@@ -31,9 +31,6 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
     case meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST:
         return useShortName ? "LongF" : "LongFast";
         break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
-        return useShortName ? "LongT" : "LongTurbo";
-        break;
     case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
         return useShortName ? "LongM" : "LongMod";
         break;

src/FSCommon.cpp

@@ -10,7 +10,10 @@
  */
 #include "FSCommon.h"
 #include "SPILock.h"
+#include "SafeFile.h"
 #include "configuration.h"
+#include <pb_decode.h>
+#include <pb_encode.h>
 
 // Software SPI is used by MUI so disable SD card here until it's also implemented
 #if defined(HAS_SDCARD) && !defined(SDCARD_USE_SOFT_SPI)
@@ -336,3 +339,62 @@ void setupSDCard()
     LOG_DEBUG("Used space: %lu MB", (uint32_t)(SD.usedBytes() / (1024 * 1024)));
 #endif
 }
+
+/** Load a protobuf from a file, return LoadFileResult */
+LoadFileResult loadProto(const char *filename, size_t protoSize, size_t objSize, const pb_msgdesc_t *fields, void *dest_struct)
+{
+    LoadFileResult state = LoadFileResult::OTHER_FAILURE;
+#ifdef FSCom
+    concurrency::LockGuard g(spiLock);
+
+    auto f = FSCom.open(filename, FILE_O_READ);
+
+    if (f) {
+        LOG_INFO("Load %s", filename);
+        pb_istream_t stream = {&readcb, &f, protoSize};
+        if (fields != &meshtastic_NodeDatabase_msg) // contains a vector object
+            memset(dest_struct, 0, objSize);
+        if (!pb_decode(&stream, fields, dest_struct)) {
+            LOG_ERROR("Error: can't decode protobuf %s", PB_GET_ERROR(&stream));
+            state = LoadFileResult::DECODE_FAILED;
+        } else {
+            LOG_INFO("Loaded %s successfully", filename);
+            state = LoadFileResult::LOAD_SUCCESS;
+        }
+        f.close();
+    } else {
+        LOG_ERROR("Could not open / read %s", filename);
+    }
+#else
+    LOG_ERROR("ERROR: Filesystem not implemented");
+    state = LoadFileResult::NO_FILESYSTEM;
+#endif
+    return state;
+}
+
+/** Save a protobuf from a file, return true for success */
+bool saveProto(const char *filename, size_t protoSize, const pb_msgdesc_t *fields, const void *dest_struct, bool fullAtomic)
+{
+    bool okay = false;
+#ifdef FSCom
+    auto f = SafeFile(filename, fullAtomic);
+
+    LOG_INFO("Save %s", filename);
+    pb_ostream_t stream = {&writecb, static_cast<Print *>(&f), protoSize};
+
+    if (!pb_encode(&stream, fields, dest_struct)) {
+        LOG_ERROR("Error: can't encode protobuf %s", PB_GET_ERROR(&stream));
+    } else {
+        okay = true;
+    }
+
+    bool writeSucceeded = f.close();
+
+    if (!okay || !writeSucceeded) {
+        LOG_ERROR("Can't write prefs!");
+    }
+#else
+    LOG_ERROR("ERROR: Filesystem not implemented");
+#endif
+    return okay;
+}

src/FSCommon.h

@@ -3,6 +3,19 @@
 #include "configuration.h"
 #include <vector>
 
+enum LoadFileResult {
+    // Successfully opened the file
+    LOAD_SUCCESS = 1,
+    // File does not exist
+    NOT_FOUND = 2,
+    // Device does not have a filesystem
+    NO_FILESYSTEM = 3,
+    // File exists, but could not decode protobufs
+    DECODE_FAILED = 4,
+    // File exists, but open failed for some reason
+    OTHER_FAILURE = 5
+};
+
 // Cross platform filesystem API
 
 #if defined(ARCH_PORTDUINO)
@@ -56,3 +69,7 @@ std::vector<meshtastic_FileInfo> getFiles(const char *dirname, uint8_t levels);
 void listDir(const char *dirname, uint8_t levels, bool del = false);
 void rmDir(const char *dirname);
 void setupSDCard();
+LoadFileResult loadProto(const char *filename, size_t protoSize, size_t objSize, const pb_msgdesc_t *fields, void *dest_struct);
+
+bool saveProto(const char *filename, size_t protoSize, const pb_msgdesc_t *fields, const void *dest_struct,
+               bool fullAtomic = true);

src/Led.cpp

@@ -0,0 +1,66 @@
+#include "Led.h"
+#include "PowerMon.h"
+#include "main.h"
+#include "power.h"
+
+GpioVirtPin ledForceOn, ledBlink;
+
+#if defined(LED_PIN)
+// Most boards have a GPIO for LED control
+static GpioHwPin ledRawHwPin(LED_PIN);
+#else
+static GpioVirtPin ledRawHwPin; // Dummy pin for no hardware
+#endif
+
+#if LED_STATE_ON == 0
+static GpioVirtPin ledHwPin;
+static GpioNotTransformer ledInverter(&ledHwPin, &ledRawHwPin);
+#else
+static GpioPin &ledHwPin = ledRawHwPin;
+#endif
+
+#if defined(HAS_PMU)
+/**
+ * A GPIO controlled by the PMU
+ */
+class GpioPmuPin : public GpioPin
+{
+  public:
+    void set(bool value)
+    {
+        if (pmu_found && PMU) {
+            // blink the axp led
+            PMU->setChargingLedMode(value ? XPOWERS_CHG_LED_ON : XPOWERS_CHG_LED_OFF);
+        }
+    }
+} ledPmuHwPin;
+
+// In some cases we need to drive a PMU LED and a normal LED
+static GpioSplitter ledFinalPin(&ledHwPin, &ledPmuHwPin);
+#else
+static GpioPin &ledFinalPin = ledHwPin;
+#endif
+
+#ifdef USE_POWERMON
+/**
+ * We monitor changes to the LED drive output because we use that as a sanity test in our power monitor stuff.
+ */
+class MonitoredLedPin : public GpioPin
+{
+  public:
+    void set(bool value)
+    {
+        if (powerMon) {
+            if (value)
+                powerMon->setState(meshtastic_PowerMon_State_LED_On);
+            else
+                powerMon->clearState(meshtastic_PowerMon_State_LED_On);
+        }
+        ledFinalPin.set(value);
+    }
+} monitoredLedPin;
+#else
+static GpioPin &monitoredLedPin = ledFinalPin;
+#endif
+
+static GpioBinaryTransformer ledForcer(&ledForceOn, &ledBlink, &monitoredLedPin, GpioBinaryTransformer::Or);

src/Led.h

@@ -0,0 +1,7 @@
+#include "GpioLogic.h"
+#include "configuration.h"
+
+/**
+ * ledForceOn and ledForceOff both override the normal ledBlinker behavior (which is controlled by main)
+ */
+extern GpioVirtPin ledForceOn, ledBlink;

src/MessageStore.cpp

@@ -1,514 +0,0 @@
-#include "configuration.h"
-#if HAS_SCREEN
-#include "FSCommon.h"
-#include "MessageStore.h"
-#include "NodeDB.h"
-#include "SPILock.h"
-#include "SafeFile.h"
-#include "gps/RTC.h"
-#include "graphics/draw/MessageRenderer.h"
-#include <cstring> // memcpy
-
-#ifndef MESSAGE_TEXT_POOL_SIZE
-#define MESSAGE_TEXT_POOL_SIZE (MAX_MESSAGES_SAVED * MAX_MESSAGE_SIZE)
-#endif
-
-// Default autosave interval 2 hours, override per device later with -DMESSAGE_AUTOSAVE_INTERVAL_SEC=300 (etc)
-#ifndef MESSAGE_AUTOSAVE_INTERVAL_SEC
-#define MESSAGE_AUTOSAVE_INTERVAL_SEC (2 * 60 * 60)
-#endif
-
-// Global message text pool and state
-static char *g_messagePool = nullptr;
-static size_t g_poolWritePos = 0;
-
-// Reset pool (called on boot or clear)
-static inline void resetMessagePool()
-{
-    if (!g_messagePool) {
-        g_messagePool = static_cast<char *>(malloc(MESSAGE_TEXT_POOL_SIZE));
-        if (!g_messagePool) {
-            LOG_ERROR("MessageStore: Failed to allocate %d bytes for message pool", MESSAGE_TEXT_POOL_SIZE);
-            return;
-        }
-    }
-    g_poolWritePos = 0;
-    memset(g_messagePool, 0, MESSAGE_TEXT_POOL_SIZE);
-}
-
-// Allocate text in pool and return offset
-// If not enough space remains, wrap around (ring buffer style)
-static inline uint16_t storeTextInPool(const char *src, size_t len)
-{
-    if (len >= MAX_MESSAGE_SIZE)
-        len = MAX_MESSAGE_SIZE - 1;
-
-    // Wrap pool if out of space
-    if (g_poolWritePos + len + 1 >= MESSAGE_TEXT_POOL_SIZE) {
-        g_poolWritePos = 0;
-    }
-
-    uint16_t offset = g_poolWritePos;
-    memcpy(&g_messagePool[g_poolWritePos], src, len);
-    g_messagePool[g_poolWritePos + len] = '\0';
-    g_poolWritePos += (len + 1);
-    return offset;
-}
-
-// Retrieve a const pointer to message text by offset
-static inline const char *getTextFromPool(uint16_t offset)
-{
-    if (!g_messagePool || offset >= MESSAGE_TEXT_POOL_SIZE)
-        return "";
-    return &g_messagePool[offset];
-}
-
-// Helper: assign a timestamp (RTC if available, else boot-relative)
-static inline void assignTimestamp(StoredMessage &sm)
-{
-    uint32_t nowSecs = getValidTime(RTCQuality::RTCQualityDevice, true);
-    if (nowSecs) {
-        sm.timestamp = nowSecs;
-        sm.isBootRelative = false;
-    } else {
-        sm.timestamp = millis() / 1000;
-        sm.isBootRelative = true;
-    }
-}
-
-// Generic push with cap (used by live + persisted queues)
-template <typename T> static inline void pushWithLimit(std::deque<T> &queue, const T &msg)
-{
-    if (queue.size() >= MAX_MESSAGES_SAVED)
-        queue.pop_front();
-    queue.push_back(msg);
-}
-
-template <typename T> static inline void pushWithLimit(std::deque<T> &queue, T &&msg)
-{
-    if (queue.size() >= MAX_MESSAGES_SAVED)
-        queue.pop_front();
-    queue.emplace_back(std::move(msg));
-}
-
-MessageStore::MessageStore(const std::string &label)
-{
-    filename = "/Messages_" + label + ".msgs";
-    resetMessagePool(); // initialize text pool on boot
-}
-
-// Live message handling (RAM only)
-void MessageStore::addLiveMessage(StoredMessage &&msg)
-{
-    pushWithLimit(liveMessages, std::move(msg));
-}
-void MessageStore::addLiveMessage(const StoredMessage &msg)
-{
-    pushWithLimit(liveMessages, msg);
-}
-
-#if ENABLE_MESSAGE_PERSISTENCE
-static bool g_messageStoreHasUnsavedChanges = false;
-static uint32_t g_lastAutoSaveMs = 0; // last time we actually saved
-
-static inline uint32_t autosaveIntervalMs()
-{
-    uint32_t sec = (uint32_t)MESSAGE_AUTOSAVE_INTERVAL_SEC;
-    if (sec < 60)
-        sec = 60;
-    return sec * 1000UL;
-}
-
-static inline bool reachedMs(uint32_t now, uint32_t target)
-{
-    return (int32_t)(now - target) >= 0;
-}
-
-// Mark new messages in RAM that need to be saved later
-static inline void markMessageStoreUnsaved()
-{
-    g_messageStoreHasUnsavedChanges = true;
-
-    if (g_lastAutoSaveMs == 0) {
-        g_lastAutoSaveMs = millis();
-    }
-}
-
-// Called periodically from the main loop in main.cpp
-static inline void autosaveTick(MessageStore *store)
-{
-    if (!store)
-        return;
-
-    uint32_t now = millis();
-
-    if (g_lastAutoSaveMs == 0) {
-        g_lastAutoSaveMs = now;
-        return;
-    }
-
-    if (!reachedMs(now, g_lastAutoSaveMs + autosaveIntervalMs()))
-        return;
-
-    // Autosave interval reached, only save if there are unsaved messages.
-    if (g_messageStoreHasUnsavedChanges) {
-        LOG_INFO("Autosaving MessageStore to flash");
-        store->saveToFlash();
-    } else {
-        LOG_INFO("Autosave skipped, no changes to save");
-        g_lastAutoSaveMs = now;
-    }
-}
-#endif
-
-// Add from incoming/outgoing packet
-const StoredMessage &MessageStore::addFromPacket(const meshtastic_MeshPacket &packet)
-{
-    StoredMessage sm;
-    assignTimestamp(sm);
-    sm.channelIndex = packet.channel;
-
-    const char *payload = reinterpret_cast<const char *>(packet.decoded.payload.bytes);
-    size_t len = strnlen(payload, MAX_MESSAGE_SIZE - 1);
-    sm.textOffset = storeTextInPool(payload, len);
-    sm.textLength = len;
-
-    // Determine sender
-    uint32_t localNode = nodeDB->getNodeNum();
-    sm.sender = (packet.from == 0) ? localNode : packet.from;
-
-    sm.dest = packet.to;
-
-    bool isDM = (sm.dest != 0 && sm.dest != NODENUM_BROADCAST);
-
-    if (packet.from == 0) {
-        sm.type = isDM ? MessageType::DM_TO_US : MessageType::BROADCAST;
-        sm.ackStatus = AckStatus::NONE;
-    } else {
-        sm.type = isDM ? MessageType::DM_TO_US : MessageType::BROADCAST;
-        sm.ackStatus = AckStatus::ACKED;
-    }
-
-    addLiveMessage(sm);
-
-#if ENABLE_MESSAGE_PERSISTENCE
-    markMessageStoreUnsaved();
-#endif
-
-    return liveMessages.back();
-}
-
-// Outgoing/manual message
-void MessageStore::addFromString(uint32_t sender, uint8_t channelIndex, const std::string &text)
-{
-    StoredMessage sm;
-
-    // Always use our local time (helper handles RTC vs boot time)
-    assignTimestamp(sm);
-
-    sm.sender = sender;
-    sm.channelIndex = channelIndex;
-    sm.textOffset = storeTextInPool(text.c_str(), text.size());
-    sm.textLength = text.size();
-
-    // Use the provided destination
-    sm.dest = sender;
-    sm.type = MessageType::DM_TO_US;
-
-    // Outgoing messages always start with unknown ack status
-    sm.ackStatus = AckStatus::NONE;
-
-    addLiveMessage(sm);
-
-#if ENABLE_MESSAGE_PERSISTENCE
-    markMessageStoreUnsaved();
-#endif
-}
-
-#if ENABLE_MESSAGE_PERSISTENCE
-
-// Compact, fixed-size on-flash representation using offset + length
-struct __attribute__((packed)) StoredMessageRecord {
-    uint32_t timestamp;
-    uint32_t sender;
-    uint8_t channelIndex;
-    uint32_t dest;
-    uint8_t isBootRelative;
-    uint8_t ackStatus;           // static_cast<uint8_t>(AckStatus)
-    uint8_t type;                // static_cast<uint8_t>(MessageType)
-    uint16_t textLength;         // message length
-    char text[MAX_MESSAGE_SIZE]; // store actual text here
-};
-
-// Serialize one StoredMessage to flash
-static inline void writeMessageRecord(SafeFile &f, const StoredMessage &m)
-{
-    StoredMessageRecord rec = {};
-    rec.timestamp = m.timestamp;
-    rec.sender = m.sender;
-    rec.channelIndex = m.channelIndex;
-    rec.dest = m.dest;
-    rec.isBootRelative = m.isBootRelative;
-    rec.ackStatus = static_cast<uint8_t>(m.ackStatus);
-    rec.type = static_cast<uint8_t>(m.type);
-    rec.textLength = m.textLength;
-
-    // Copy the actual text into the record from RAM pool
-    const char *txt = getTextFromPool(m.textOffset);
-    strncpy(rec.text, txt, MAX_MESSAGE_SIZE - 1);
-    rec.text[MAX_MESSAGE_SIZE - 1] = '\0';
-
-    f.write(reinterpret_cast<const uint8_t *>(&rec), sizeof(rec));
-}
-
-// Deserialize one StoredMessage from flash; returns false on short read
-static inline bool readMessageRecord(File &f, StoredMessage &m)
-{
-    StoredMessageRecord rec = {};
-    if (f.readBytes(reinterpret_cast<char *>(&rec), sizeof(rec)) != sizeof(rec))
-        return false;
-
-    m.timestamp = rec.timestamp;
-    m.sender = rec.sender;
-    m.channelIndex = rec.channelIndex;
-    m.dest = rec.dest;
-    m.isBootRelative = rec.isBootRelative;
-    m.ackStatus = static_cast<AckStatus>(rec.ackStatus);
-    m.type = static_cast<MessageType>(rec.type);
-    m.textLength = rec.textLength;
-
-    // 💡 Re-store text into pool and update offset
-    m.textLength = strnlen(rec.text, MAX_MESSAGE_SIZE - 1);
-    m.textOffset = storeTextInPool(rec.text, m.textLength);
-
-    return true;
-}
-
-void MessageStore::saveToFlash()
-{
-#ifdef FSCom
-    // Ensure root exists
-    spiLock->lock();
-    FSCom.mkdir("/");
-    spiLock->unlock();
-
-    SafeFile f(filename.c_str(), false);
-
-    spiLock->lock();
-    uint8_t count = static_cast<uint8_t>(liveMessages.size());
-    if (count > MAX_MESSAGES_SAVED)
-        count = MAX_MESSAGES_SAVED;
-    f.write(&count, 1);
-
-    for (uint8_t i = 0; i < count; ++i) {
-        writeMessageRecord(f, liveMessages[i]);
-    }
-    spiLock->unlock();
-
-    f.close();
-#endif
-
-    // Reset autosave state after any save
-    g_messageStoreHasUnsavedChanges = false;
-    g_lastAutoSaveMs = millis();
-}
-
-void MessageStore::loadFromFlash()
-{
-    std::deque<StoredMessage>().swap(liveMessages);
-    resetMessagePool(); // reset pool when loading
-
-#ifdef FSCom
-    concurrency::LockGuard guard(spiLock);
-
-    if (!FSCom.exists(filename.c_str()))
-        return;
-
-    auto f = FSCom.open(filename.c_str(), FILE_O_READ);
-    if (!f)
-        return;
-
-    uint8_t count = 0;
-    f.readBytes(reinterpret_cast<char *>(&count), 1);
-    if (count > MAX_MESSAGES_SAVED)
-        count = MAX_MESSAGES_SAVED;
-
-    for (uint8_t i = 0; i < count; ++i) {
-        StoredMessage m;
-        if (!readMessageRecord(f, m))
-            break;
-        liveMessages.push_back(m);
-    }
-
-    f.close();
-#endif
-    // Loading messages does not trigger an autosave
-    g_messageStoreHasUnsavedChanges = false;
-    g_lastAutoSaveMs = millis();
-}
-
-#else
-// If persistence is disabled, these functions become no-ops
-void MessageStore::saveToFlash() {}
-void MessageStore::loadFromFlash() {}
-#endif
-
-// Clear all messages (RAM + persisted queue)
-void MessageStore::clearAllMessages()
-{
-    std::deque<StoredMessage>().swap(liveMessages);
-    resetMessagePool();
-
-#ifdef FSCom
-    SafeFile f(filename.c_str(), false);
-    uint8_t count = 0;
-    f.write(&count, 1); // write "0 messages"
-    f.close();
-#endif
-
-#if ENABLE_MESSAGE_PERSISTENCE
-    g_messageStoreHasUnsavedChanges = false;
-    g_lastAutoSaveMs = millis();
-#endif
-}
-
-// Internal helper: erase first or last message matching a predicate
-template <typename Predicate> static void eraseIf(std::deque<StoredMessage> &deque, Predicate pred, bool fromBack = false)
-{
-    if (fromBack) {
-        // Iterate from the back and erase all matches from the end
-        for (auto it = deque.rbegin(); it != deque.rend();) {
-            if (pred(*it)) {
-                it = std::deque<StoredMessage>::reverse_iterator(deque.erase(std::next(it).base()));
-            } else {
-                ++it;
-            }
-        }
-    } else {
-        // Manual forward search to erase all matches
-        for (auto it = deque.begin(); it != deque.end();) {
-            if (pred(*it)) {
-                it = deque.erase(it);
-            } else {
-                ++it;
-            }
-        }
-    }
-}
-
-// Delete oldest message (RAM + persisted queue)
-void MessageStore::deleteOldestMessage()
-{
-    eraseIf(liveMessages, [](StoredMessage &) { return true; });
-    saveToFlash();
-}
-
-// Delete oldest message in a specific channel
-void MessageStore::deleteOldestMessageInChannel(uint8_t channel)
-{
-    auto pred = [channel](const StoredMessage &m) { return m.type == MessageType::BROADCAST && m.channelIndex == channel; };
-    eraseIf(liveMessages, pred);
-    saveToFlash();
-}
-
-void MessageStore::deleteAllMessagesInChannel(uint8_t channel)
-{
-    auto pred = [channel](const StoredMessage &m) { return m.type == MessageType::BROADCAST && m.channelIndex == channel; };
-    eraseIf(liveMessages, pred, false /* delete ALL, not just first */);
-    saveToFlash();
-}
-
-void MessageStore::deleteAllMessagesWithPeer(uint32_t peer)
-{
-    uint32_t local = nodeDB->getNodeNum();
-    auto pred = [&](const StoredMessage &m) {
-        if (m.type != MessageType::DM_TO_US)
-            return false;
-        uint32_t other = (m.sender == local) ? m.dest : m.sender;
-        return other == peer;
-    };
-    eraseIf(liveMessages, pred, false);
-    saveToFlash();
-}
-
-// Delete oldest message in a direct chat with a node
-void MessageStore::deleteOldestMessageWithPeer(uint32_t peer)
-{
-    auto pred = [peer](const StoredMessage &m) {
-        if (m.type != MessageType::DM_TO_US)
-            return false;
-        uint32_t other = (m.sender == nodeDB->getNodeNum()) ? m.dest : m.sender;
-        return other == peer;
-    };
-    eraseIf(liveMessages, pred);
-    saveToFlash();
-}
-
-std::deque<StoredMessage> MessageStore::getChannelMessages(uint8_t channel) const
-{
-    std::deque<StoredMessage> result;
-    for (const auto &m : liveMessages) {
-        if (m.type == MessageType::BROADCAST && m.channelIndex == channel) {
-            result.push_back(m);
-        }
-    }
-    return result;
-}
-
-std::deque<StoredMessage> MessageStore::getDirectMessages() const
-{
-    std::deque<StoredMessage> result;
-    for (const auto &m : liveMessages) {
-        if (m.type == MessageType::DM_TO_US) {
-            result.push_back(m);
-        }
-    }
-    return result;
-}
-
-// Upgrade boot-relative timestamps once RTC is valid
-// Only same-boot boot-relative messages are healed.
-// Persisted boot-relative messages from old boots stay ??? forever.
-void MessageStore::upgradeBootRelativeTimestamps()
-{
-    uint32_t nowSecs = getValidTime(RTCQuality::RTCQualityDevice, true);
-    if (nowSecs == 0)
-        return; // Still no valid RTC
-
-    uint32_t bootNow = millis() / 1000;
-
-    auto fix = [&](std::deque<StoredMessage> &dq) {
-        for (auto &m : dq) {
-            if (m.isBootRelative && m.timestamp <= bootNow) {
-                uint32_t bootOffset = nowSecs - bootNow;
-                m.timestamp += bootOffset;
-                m.isBootRelative = false;
-            }
-        }
-    };
-    fix(liveMessages);
-}
-
-const char *MessageStore::getText(const StoredMessage &msg)
-{
-    // Wrapper around the internal helper
-    return getTextFromPool(msg.textOffset);
-}
-
-uint16_t MessageStore::storeText(const char *src, size_t len)
-{
-    // Wrapper around the internal helper
-    return storeTextInPool(src, len);
-}
-
-#if ENABLE_MESSAGE_PERSISTENCE
-void messageStoreAutosaveTick()
-{
-    // Called from the main loop to check autosave timing
-    autosaveTick(&messageStore);
-}
-#endif
-
-// Global definition
-MessageStore messageStore("default");
-#endif

src/MessageStore.h

@@ -1,136 +0,0 @@
-#pragma once
-
-#if HAS_SCREEN
-
-// Disable debug logging entirely on release builds of HELTEC_MESH_SOLAR for space constraints
-#if defined(HELTEC_MESH_SOLAR)
-#define LOG_DEBUG(...)
-#endif
-
-// Enable or disable message persistence (flash storage)
-// Define -DENABLE_MESSAGE_PERSISTENCE=0 in build_flags to disable it entirely
-#ifndef ENABLE_MESSAGE_PERSISTENCE
-#define ENABLE_MESSAGE_PERSISTENCE 1
-#endif
-
-#include "mesh/generated/meshtastic/mesh.pb.h"
-#include <cstdint>
-#include <deque>
-#include <string>
-
-// How many messages are stored (RAM + flash).
-// Define -DMESSAGE_HISTORY_LIMIT=N in build_flags to control memory usage.
-#ifndef MESSAGE_HISTORY_LIMIT
-#define MESSAGE_HISTORY_LIMIT 20
-#endif
-
-// Internal alias used everywhere in code – do NOT redefine elsewhere.
-#define MAX_MESSAGES_SAVED MESSAGE_HISTORY_LIMIT
-
-// Maximum text payload size per message in bytes.
-// This still defines the max message length, but we no longer reserve this space per message.
-#define MAX_MESSAGE_SIZE 220
-
-// Total shared text pool size for all messages combined.
-// The text pool is RAM-only. Text is re-stored from flash into the pool on boot.
-#ifndef MESSAGE_TEXT_POOL_SIZE
-#define MESSAGE_TEXT_POOL_SIZE (MAX_MESSAGES_SAVED * MAX_MESSAGE_SIZE)
-#endif
-
-// Explicit message classification
-enum class MessageType : uint8_t {
-    BROADCAST = 0, // broadcast message
-    DM_TO_US = 1   // direct message addressed to this node
-};
-
-// Delivery status for messages we sent
-enum class AckStatus : uint8_t {
-    NONE = 0,    // just sent, waiting (no symbol shown)
-    ACKED = 1,   // got a valid ACK from destination
-    NACKED = 2,  // explicitly failed
-    TIMEOUT = 3, // no ACK after retry window
-    RELAYED = 4  // got an ACK from relay, not destination
-};
-
-struct StoredMessage {
-    uint32_t timestamp;   // When message was created (secs since boot or RTC)
-    uint32_t sender;      // NodeNum of sender
-    uint8_t channelIndex; // Channel index used
-    uint32_t dest;        // Destination node (broadcast or direct)
-    MessageType type;     // Derived from dest (explicit classification)
-    bool isBootRelative;  // true = millis()/1000 fallback; false = epoch/RTC absolute
-    AckStatus ackStatus;  // Delivery status (only meaningful for our own sent messages)
-
-    // Text storage metadata — rebuilt from flash at boot
-    uint16_t textOffset; // Offset into global text pool (valid only after loadFromFlash())
-    uint16_t textLength; // Length of text in bytes
-
-    // Default constructor initializes all fields safely
-    StoredMessage()
-        : timestamp(0), sender(0), channelIndex(0), dest(0xffffffff), type(MessageType::BROADCAST), isBootRelative(false),
-          ackStatus(AckStatus::NONE), textOffset(0), textLength(0)
-    {
-    }
-};
-
-class MessageStore
-{
-  public:
-    explicit MessageStore(const std::string &label);
-
-    // Live RAM methods (always current, used by UI and runtime)
-    void addLiveMessage(StoredMessage &&msg);
-    void addLiveMessage(const StoredMessage &msg); // convenience overload
-    const std::deque<StoredMessage> &getLiveMessages() const { return liveMessages; }
-
-    // Add new messages from packets or manual input
-    const StoredMessage &addFromPacket(const meshtastic_MeshPacket &mp);                // Incoming/outgoing → RAM only
-    void addFromString(uint32_t sender, uint8_t channelIndex, const std::string &text); // Manual add
-
-    // Persistence methods (used only on boot/shutdown)
-    void saveToFlash();   // Save messages to flash
-    void loadFromFlash(); // Load messages from flash
-
-    // Clear all messages (RAM + persisted queue + text pool)
-    void clearAllMessages();
-
-    // Delete helpers
-    void deleteOldestMessage(); // remove oldest from RAM (and flash on save)
-    void deleteOldestMessageInChannel(uint8_t channel);
-    void deleteOldestMessageWithPeer(uint32_t peer);
-    void deleteAllMessagesInChannel(uint8_t channel);
-    void deleteAllMessagesWithPeer(uint32_t peer);
-
-    // Unified accessor (for UI code, defaults to RAM buffer)
-    const std::deque<StoredMessage> &getMessages() const { return liveMessages; }
-
-    // Helper filters for future use
-    std::deque<StoredMessage> getChannelMessages(uint8_t channel) const; // Only broadcast messages on a channel
-    std::deque<StoredMessage> getDirectMessages() const;                 // Only direct messages
-
-    // Upgrade boot-relative timestamps once RTC is valid
-    void upgradeBootRelativeTimestamps();
-
-    // Retrieve the C-string text for a stored message
-    static const char *getText(const StoredMessage &msg);
-
-    // Allocate text into pool (used by sender-side code)
-    static uint16_t storeText(const char *src, size_t len);
-
-    // Used when loading from flash to rebuild the text pool
-    static uint16_t rebuildTextFromFlash(const char *src, size_t len);
-
-  private:
-    std::deque<StoredMessage> liveMessages; // Single in-RAM message buffer (also used for persistence)
-    std::string filename;                   // Flash filename for persistence
-};
-
-#if ENABLE_MESSAGE_PERSISTENCE
-// Called periodically from main loop to trigger time based autosave
-void messageStoreAutosaveTick();
-#endif
-
-// Global instance (defined in MessageStore.cpp)
-extern MessageStore messageStore;
-
-#endif