Merge branch 'develop' into Freetext

Suppress Navigation bar for Freetext frames
Emote Picker Refactoring
2026-10-21 18:52:36 +10:00 · 2026-02-23 20:55:58 -05:00 · 2026-02-19 21:49:43 -05:00 · 2026-02-19 18:26:52 -05:00 · 2026-02-19 17:35:58 -05:00 · 2026-02-19 17:09:28 -05:00
374 changed files with 4440 additions and 9631 deletions
@@ -100,7 +100,7 @@ runs:
      id: version
    - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v7
+      uses: actions/upload-artifact@v6
      with:
        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}
        overwrite: true
@@ -8,6 +8,8 @@ runs:
      uses: actions/checkout@v6
      with:
        submodules: recursive
        ref: ${{github.event.pull_request.head.ref}}
        repository: ${{github.event.pull_request.head.repo.full_name}}
    - name: Install dependencies
      shell: bash
@@ -4,16 +4,16 @@
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
  to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
-  is appreciated." This will allow other devs to potentially save you time by not accidentally duplicating work etc...
+  is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the Linux version),
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the linux version),
  because it automatically follows our indentation rules and its auto reformatting will not cause spurious changes to lines.
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
 - Please also enable "Allow edits by maintainers".
 - Please do not submit untested code.
- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and community members can help test your changes.
+- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and commnunity members can help test your changes.
 - If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord
 ## 🤝 Attestations
@@ -16,7 +16,8 @@ on:
        type: string
 permissions:
-  contents: read
+  contents: write
  packages: write
 jobs:
  build-debian-src:
@@ -27,6 +28,8 @@ jobs:
        with:
          submodules: recursive
          path: meshtasticd
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}
      - name: Install deps
        shell: bash
@@ -39,8 +42,7 @@ jobs:
          sudo mk-build-deps --install --remove --tool='apt-get -o Debug::pkgProblemResolver=yes --no-install-recommends --yes' debian/control
      - name: Import GPG key
-        if: github.event_name != 'pull_request' && github.event_name != 'pull_request_target'
+        uses: crazy-max/ghaction-import-gpg@v6
        uses: crazy-max/ghaction-import-gpg@v7
        with:
          gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
        id: gpg
@@ -58,11 +60,11 @@ jobs:
        run: debian/ci_pack_sdeb.sh
        env:
          SERIES: ${{ inputs.series }}
-          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid || '' }}
+          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid }}
          PKG_VERSION: ${{ steps.version.outputs.deb }}
      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
          overwrite: true
@@ -26,6 +26,8 @@ jobs:
      - uses: actions/checkout@v6
        with:
          submodules: recursive
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}
      - name: Build ${{ inputs.platform }}
        id: build
@@ -109,7 +111,7 @@ jobs:
          echo "</details>" >> $GITHUB_STEP_SUMMARY
      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        id: upload-firmware
        with:
          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
@@ -125,7 +127,7 @@ jobs:
            release/device-*.bat
      - name: Store manifests as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        id: upload-manifest
        with:
          name: manifest-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
@@ -87,7 +87,7 @@ jobs:
  gather-artifacts:
    permissions:
-      contents: read
+      contents: write
      pull-requests: write
    runs-on: ubuntu-latest
    needs: [version, build]
@@ -98,7 +98,7 @@ jobs:
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
        with:
          path: ./
          pattern: firmware-*-*
@@ -111,7 +111,7 @@ jobs:
        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
          overwrite: true
@@ -127,7 +127,7 @@ jobs:
            ./Meshtastic_nRF52_factory_erase*.uf2
          retention-days: 30
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
        with:
          pattern: firmware-*-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -146,7 +146,7 @@ jobs:
        run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
          overwrite: true
@@ -5,7 +5,7 @@ on:
  workflow_dispatch:
  push:
    branches:
-      - develop # Default branch, same as 'cron' above
+      - master
    paths:
      - debian/**
      - "*.rpkg"
@@ -16,7 +16,7 @@ on:
      - .github/workflows/hook_copr.yml
 permissions:
-  contents: read
+  contents: write
  packages: write
 jobs:
@@ -35,8 +35,8 @@ jobs:
        series:
          - jammy # 22.04 LTS
          - noble # 24.04 LTS
          - plucky # 25.04
          - questing # 25.10
          - resolute # 26.04 LTS
    uses: ./.github/workflows/package_ppa.yml
    with:
      ppa_repo: ppa:meshtastic/daily
@@ -37,7 +37,7 @@ on:
        value: ${{ jobs.docker-build.outputs.digest }}
 permissions:
-  contents: read
+  contents: write
  packages: write
 jobs:
@@ -50,6 +50,8 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}
      - name: Get release version string
        run: |
@@ -58,16 +60,16 @@ jobs:
      - name: Docker login
        if: ${{ inputs.push }}
-        uses: docker/login-action@v4
+        uses: docker/login-action@v3
        with:
          username: meshtastic
          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
      - name: Set up QEMU
-        uses: docker/setup-qemu-action@v4
+        uses: docker/setup-qemu-action@v3
      - name: Docker setup
-        uses: docker/setup-buildx-action@v4
+        uses: docker/setup-buildx-action@v3
      - name: Sanitize platform string
        id: sanitize_platform
@@ -76,7 +78,7 @@ jobs:
      - name: Docker tag
        id: meta
-        uses: docker/metadata-action@v6
+        uses: docker/metadata-action@v5
        with:
          images: meshtastic/meshtasticd
          tags: |
@@ -84,7 +86,7 @@ jobs:
          flavor: latest=false
      - name: Docker build and push
-        uses: docker/build-push-action@v7
+        uses: docker/build-push-action@v6
        id: docker_variant
        with:
          context: .
@@ -12,7 +12,7 @@ on:
        type: string
 permissions:
-  contents: read
+  contents: write
  packages: write
 jobs:
@@ -86,6 +86,8 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}
      - name: Get release version string
        run: |
@@ -137,14 +139,14 @@ jobs:
        id: tags
      - name: Docker login
-        uses: docker/login-action@v4
+        uses: docker/login-action@v3
        with:
          username: meshtastic
          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
      - name: Docker meta (Debian)
        id: meta_debian
-        uses: docker/metadata-action@v6
+        uses: docker/metadata-action@v5
        with:
          images: meshtastic/meshtasticd
          tags: |
@@ -165,7 +167,7 @@ jobs:
      - name: Docker meta (Alpine)
        id: meta_alpine
-        uses: docker/metadata-action@v6
+        uses: docker/metadata-action@v5
        with:
          images: meshtastic/meshtasticd
          tags: |
@@ -11,7 +11,8 @@ on:
        type: string
 permissions:
-  contents: read
+  contents: write
  packages: write
 jobs:
  build-copr-hook:
@@ -21,6 +22,8 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
          ref: ${{ github.ref }}
          repository: ${{ github.repository }}
      - name: Trigger COPR build
        uses: vidplace7/copr-build@main
@@ -15,7 +15,8 @@ on:
      - "**.md"
      - version.properties
-  pull_request:
+  # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
  pull_request_target:
    branches:
      - master
      - develop
@@ -28,8 +29,6 @@ on:
  workflow_dispatch:
 permissions: read-all
 jobs:
  setup:
    strategy:
@@ -89,12 +88,15 @@ jobs:
      - uses: actions/checkout@v6
        with:
          submodules: recursive
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}
      - name: Check ${{ matrix.check.board }}
        uses: meshtastic/gh-action-firmware@main
        with:
          pio_platform: ${{ matrix.check.platform }}
          pio_env: ${{ matrix.check.board }}
          pio_target: check
          pio_opts: --fail-on-defect=low
  build:
    needs: [setup, version]
@@ -125,16 +127,9 @@ jobs:
  test-native:
    if: ${{ !contains(github.ref_name, 'event/') && github.repository == 'meshtastic/firmware' }}
    permissions: # Needed for dorny/test-reporter.
      contents: read
      actions: read
      checks: write
    uses: ./.github/workflows/test_native.yml
  docker:
    permissions: # Needed for pushing to GHCR.
      contents: read
      packages: write
    strategy:
      fail-fast: false
      matrix:
@@ -159,6 +154,9 @@ jobs:
  gather-artifacts:
    # trunk-ignore(checkov/CKV2_GHA_1)
    if: github.repository == 'meshtastic/firmware'
    permissions:
      contents: write
      pull-requests: write
    strategy:
      fail-fast: false
      matrix:
@@ -176,8 +174,11 @@ jobs:
    steps:
      - name: Checkout code
        uses: actions/checkout@v6
        with:
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
        with:
          path: ./
          pattern: firmware-${{matrix.arch}}-*
@@ -187,7 +188,7 @@ jobs:
        run: ls -R
      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          overwrite: true
@@ -205,7 +206,7 @@ jobs:
            ./Meshtastic_nRF52_factory_erase*.uf2
          retention-days: 30
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
        with:
          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -224,13 +225,20 @@ jobs:
        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
          overwrite: true
          path: ./*.elf
          retention-days: 30
      - uses: scruplelesswizard/comment-artifact@main
        if: ${{ github.event_name == 'pull_request' }}
        with:
          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
          github-token: ${{ secrets.GITHUB_TOKEN }}
  shame:
    if: github.repository == 'meshtastic/firmware'
    continue-on-error: true
@@ -238,44 +246,42 @@ jobs:
    needs: [build]
    steps:
      - uses: actions/checkout@v6
-        if: github.event_name == 'pull_request'
+        if: github.event_name == 'pull_request_target'
        with:
          filter: blob:none # means we download all the git history but none of the commit (except ones with checkout like the head)
          fetch-depth: 0
      - name: Download the current manifests
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          path: ./manifests-new/
          pattern: manifest-*
          merge-multiple: true
      - name: Upload combined manifests for later commit and global stats crunching.
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        id: upload-manifest
        with:
          name: manifests-${{ github.sha }}
          overwrite: true
          path: manifests-new/*.mt.json
      - name: Find the merge base
-        if: github.event_name == 'pull_request'
+        if: github.event_name == 'pull_request_target'
        run: echo "MERGE_BASE=$(git merge-base "origin/$base" "$head")" >> $GITHUB_ENV
        env:
          base: ${{ github.base_ref }}
          head: ${{ github.sha }}
      # Currently broken (for-loop through EVERY artifact -- rate limiting)
      # - name: Download the old manifests
-      #   if: github.event_name == 'pull_request'
+      #   if: github.event_name == 'pull_request_target'
      #   run: gh run download -R "$repo" --name "manifests-$merge_base" --dir manifest-old/
      #   env:
      #     GH_TOKEN: ${{ github.token }}
      #     merge_base: ${{ env.MERGE_BASE }}
      #     repo: ${{ github.repository }}
      # - name: Do scan and post comment
-      #   if: github.event_name == 'pull_request'
+      #   if: github.event_name == 'pull_request_target'
      #   run: python3 bin/shame.py ${{ github.event.pull_request.number }} manifests-old/ manifests-new/
  release-artifacts:
    permissions: # Needed for 'gh release upload'.
      contents: write
    runs-on: ubuntu-latest
    if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
    outputs:
@@ -319,14 +325,14 @@ jobs:
          body: ${{ steps.release_notes.outputs.notes }}
      - name: Download source deb
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
          merge-multiple: true
          path: ./output/debian-src
      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -350,7 +356,7 @@ jobs:
          }' > firmware-${{ needs.version.outputs.long }}.json
      - name: Save Release manifest artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: manifest-${{ needs.version.outputs.long }}
          overwrite: true
@@ -367,8 +373,6 @@ jobs:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
  release-firmware:
    permissions: # Needed for 'gh release upload'.
      contents: write
    strategy:
      fail-fast: false
      matrix:
@@ -393,7 +397,7 @@ jobs:
        with:
          python-version: 3.x
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
        with:
          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -410,7 +414,7 @@ jobs:
      - name: Zip firmware
        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
        with:
          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -451,14 +455,14 @@ jobs:
          python-version: 3.x
      - name: Get firmware artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
          merge-multiple: true
          path: ./publish
      - name: Get manifest artifact
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          pattern: manifest-${{ needs.version.outputs.long }}
          path: ./publish
@@ -0,0 +1,371 @@
 name: Merge Queue
 # Not sure how concurrency works in merge_queue, removing for now.
 # concurrency:
 #   group: merge-queue-${{ github.head_ref || github.run_id }}
 #   cancel-in-progress: true
 on:
  # Merge group is a special trigger that is used to trigger the workflow when a merge group is created.
  merge_group:
 jobs:
  setup:
    strategy:
      fail-fast: true
      matrix:
        arch:
          - all
          - check
    runs-on: ubuntu-24.04
    steps:
      - uses: actions/checkout@v6
      - uses: actions/setup-python@v6
        with:
          python-version: 3.x
          cache: pip
      - run: pip install -U platformio
      - name: Generate matrix
        id: jsonStep
        run: |
          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
          else  
            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level pr)
          fi
          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
          echo "${{matrix.arch}}=$TARGETS" >> $GITHUB_OUTPUT
    outputs:
      all: ${{ steps.jsonStep.outputs.all }}
      check: ${{ steps.jsonStep.outputs.check }}
  version:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v6
      - name: Get release version string
        run: |
          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
        id: version
        env:
          BUILD_LOCATION: local
    outputs:
      long: ${{ steps.version.outputs.long }}
      deb: ${{ steps.version.outputs.deb }}
  check:
    needs: setup
    strategy:
      fail-fast: true
      matrix:
        check: ${{ fromJson(needs.setup.outputs.check) }}
    runs-on: ubuntu-latest
    if: ${{ github.event_name != 'workflow_dispatch' }}
    steps:
      - uses: actions/checkout@v6
      - name: Build base
        id: base
        uses: ./.github/actions/setup-base
      - name: Check ${{ matrix.check.board }}
        run: bin/check-all.sh ${{ matrix.check.board }}
  build:
    needs: [setup, version]
    strategy:
      matrix:
        build: ${{ fromJson(needs.setup.outputs.all) }}
    uses: ./.github/workflows/build_firmware.yml
    with:
      version: ${{ needs.version.outputs.long }}
      pio_env: ${{ matrix.build.board }}
      platform: ${{ matrix.build.platform }}
  build-debian-src:
    if: github.repository == 'meshtastic/firmware'
    uses: ./.github/workflows/build_debian_src.yml
    with:
      series: UNRELEASED
      build_location: local
    secrets: inherit
  package-pio-deps-native-tft:
    if: ${{ github.event_name == 'workflow_dispatch' }}
    uses: ./.github/workflows/package_pio_deps.yml
    with:
      pio_env: native-tft
    secrets: inherit
  test-native:
    if: ${{ !contains(github.ref_name, 'event/') }}
    uses: ./.github/workflows/test_native.yml
  docker:
    strategy:
      fail-fast: false
      matrix:
        distro: [debian, alpine]
        platform: [linux/amd64, linux/arm64, linux/arm/v7]
        pio_env: [native, native-tft]
        exclude:
          - distro: alpine
            platform: linux/arm/v7
          - pio_env: native-tft
            platform: linux/arm64
          - pio_env: native-tft
            platform: linux/arm/v7
    uses: ./.github/workflows/docker_build.yml
    with:
      distro: ${{ matrix.distro }}
      platform: ${{ matrix.platform }}
      runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
      pio_env: ${{ matrix.pio_env }}
      push: false
  gather-artifacts:
    # trunk-ignore(checkov/CKV2_GHA_1)
    permissions:
      contents: write
      pull-requests: write
    strategy:
      fail-fast: false
      matrix:
        arch:
          - esp32
          - esp32s3
          - esp32c3
          - esp32c6
          - nrf52840
          - rp2040
          - rp2350
          - stm32
    runs-on: ubuntu-latest
    needs: [version, build]
    steps:
      - name: Checkout code
        uses: actions/checkout@v6
        with:
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}
      - uses: actions/download-artifact@v7
        with:
          path: ./
          pattern: firmware-${{matrix.arch}}-*
          merge-multiple: true
      - name: Display structure of downloaded files
        run: ls -R
      - name: Move files up
        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
      - name: Repackage in single firmware zip
        uses: actions/upload-artifact@v6
        with:
          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          overwrite: true
          path: |
            ./firmware-*.bin
            ./firmware-*.uf2
            ./firmware-*.hex
            ./firmware-*.zip
            ./device-*.sh
            ./device-*.bat
            ./littlefs-*.bin
            ./bleota*bin
            ./Meshtastic_nRF52_factory_erase*.uf2
          retention-days: 30
      - uses: actions/download-artifact@v7
        with:
          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
          path: ./output
      # For diagnostics
      - name: Show artifacts
        run: ls -lR
      - name: Device scripts permissions
        run: |
          chmod +x ./output/device-install.sh || true
          chmod +x ./output/device-update.sh || true
      - name: Zip firmware
        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
      - name: Repackage in single elfs zip
        uses: actions/upload-artifact@v6
        with:
          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
          overwrite: true
          path: ./*.elf
          retention-days: 30
      - uses: scruplelesswizard/comment-artifact@main
        if: ${{ github.event_name == 'pull_request' }}
        with:
          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
          github-token: ${{ secrets.GITHUB_TOKEN }}
  release-artifacts:
    runs-on: ubuntu-latest
    if: ${{ github.event_name == 'workflow_dispatch' }}
    outputs:
      upload_url: ${{ steps.create_release.outputs.upload_url }}
    needs:
      - version
      - gather-artifacts
      - build-debian-src
      - package-pio-deps-native-tft
    steps:
      - name: Checkout
        uses: actions/checkout@v6
      - name: Create release
        uses: softprops/action-gh-release@v2
        id: create_release
        with:
          draft: true
          prerelease: true
          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
          tag_name: v${{ needs.version.outputs.long }}
          body: |
            Autogenerated by github action, developer should edit as required before publishing...
      - name: Download source deb
        uses: actions/download-artifact@v7
        with:
          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
          merge-multiple: true
          path: ./output/debian-src
      - name: Download `native-tft` pio deps
        uses: actions/download-artifact@v7
        with:
          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
          merge-multiple: true
          path: ./output/pio-deps-native-tft
      - name: Zip Linux sources
        working-directory: output
        run: |
          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
      # For diagnostics
      - name: Display structure of downloaded files
        run: ls -lR
      - name: Add Linux sources to GtiHub Release
        # Only run when targeting master branch with workflow_dispatch
        if: ${{ github.ref_name == 'master' }}
        run: |
          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
        env:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
  release-firmware:
    strategy:
      fail-fast: false
      matrix:
        arch:
          - esp32
          - esp32s3
          - esp32c3
          - esp32c6
          - nrf52840
          - rp2040
          - rp2350
          - stm32
    runs-on: ubuntu-latest
    if: ${{ github.event_name == 'workflow_dispatch' }}
    needs: [release-artifacts, version]
    steps:
      - name: Checkout
        uses: actions/checkout@v6
      - name: Setup Python
        uses: actions/setup-python@v6
        with:
          python-version: 3.x
      - uses: actions/download-artifact@v7
        with:
          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
          path: ./output
      - name: Display structure of downloaded files
        run: ls -lR
      - name: Device scripts permissions
        run: |
          chmod +x ./output/device-install.sh || true
          chmod +x ./output/device-update.sh || true
      - name: Zip firmware
        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
      - uses: actions/download-artifact@v7
        with:
          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
          path: ./elfs
      - name: Zip debug elfs
        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
      # For diagnostics
      - name: Display structure of downloaded files
        run: ls -lR
      - name: Add bins and debug elfs to GitHub Release
        # Only run when targeting master branch with workflow_dispatch
        if: ${{ github.ref_name == 'master' }}
        run: |
          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
        env:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
  publish-firmware:
    runs-on: ubuntu-24.04
    if: ${{ github.event_name == 'workflow_dispatch' }}
    needs: [release-firmware, version]
    env:
      targets: |-
        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
    steps:
      - name: Checkout
        uses: actions/checkout@v6
      - name: Setup Python
        uses: actions/setup-python@v6
        with:
          python-version: 3.x
      - uses: actions/download-artifact@v7
        with:
          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
          merge-multiple: true
          path: ./publish
      - name: Publish firmware to meshtastic.github.io
        uses: peaceiris/actions-gh-pages@v4
        env:
          # On event/* branches, use the event name as the destination prefix
          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
        with:
          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
          external_repository: meshtastic/meshtastic.github.io
          publish_branch: master
          publish_dir: ./publish
          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
          keep_files: true
          user_name: github-actions[bot]
          user_email: github-actions[bot]@users.noreply.github.com
          commit_message: ${{ needs.version.outputs.long }}
          enable_jekyll: true
@@ -18,7 +18,8 @@ on:
        type: string
 permissions:
-  contents: read
+  contents: write
  packages: write
 jobs:
  build-debian-src:
@@ -57,7 +58,7 @@ jobs:
        id: version
      - name: Download artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
          merge-multiple: true
@@ -16,7 +16,8 @@ on:
        type: string
 permissions:
-  contents: read
+  contents: write
  packages: write
 jobs:
  pkg-pio-libdeps:
@@ -26,6 +27,8 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}
      - name: Setup Python
        uses: actions/setup-python@v6
@@ -51,19 +54,9 @@ jobs:
          PLATFORMIO_LIBDEPS_DIR: pio/libdeps
          PLATFORMIO_PACKAGES_DIR: pio/packages
          PLATFORMIO_CORE_DIR: pio/core
          PLATFORMIO_SETTING_ENABLE_TELEMETRY: 0
          PLATFORMIO_SETTING_CHECK_PLATFORMIO_INTERVAL: 3650
          PLATFORMIO_SETTING_CHECK_PRUNE_SYSTEM_THRESHOLD: 10240
      - name: Mangle platformio cache
        # Add "1" to epoch-timestamps of all downloads in the cache.
        # This is a hack to prevent internet access at build-time.
        run: |
          cp pio/core/.cache/downloads/usage.db pio/core/.cache/downloads/usage.db.bak
          jq -c 'with_entries(.value |= (. | tostring + "1" | tonumber))' pio/core/.cache/downloads/usage.db.bak > pio/core/.cache/downloads/usage.db
      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
          overwrite: true
@@ -16,7 +16,8 @@ on:
        type: string
 permissions:
-  contents: read
+  contents: write
  packages: write
 jobs:
  build-debian-src:
@@ -35,6 +36,8 @@ jobs:
        with:
          submodules: recursive
          path: meshtasticd
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}
      - name: Install deps
        shell: bash
@@ -43,7 +46,7 @@ jobs:
          sudo apt-get install -y dput
      - name: Import GPG key
-        uses: crazy-max/ghaction-import-gpg@v7
+        uses: crazy-max/ghaction-import-gpg@v6
        with:
          gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
        id: gpg
@@ -57,7 +60,7 @@ jobs:
        id: version
      - name: Download artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
          merge-multiple: true
@@ -67,6 +70,5 @@ jobs:
      - name: Publish with dput
        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
        timeout-minutes: 15 # dput is terrible, sometimes runs 'forever'
        run: |
          dput ${{ inputs.ppa_repo }} meshtasticd_${{ steps.version.outputs.deb }}~${{ inputs.series }}_source.changes
@@ -50,7 +50,7 @@ jobs:
      - name: Download test artifacts
        if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          name: platformio-test-report-${{ steps.version.outputs.long }}
          merge-multiple: true
@@ -23,8 +23,8 @@ jobs:
        series:
          - jammy # 22.04 LTS
          - noble # 24.04 LTS
          - plucky # 25.04
          - questing # 25.10
          - resolute # 26.04 LTS
    uses: ./.github/workflows/package_ppa.yml
    with:
      ppa_repo: |-
@@ -33,7 +33,7 @@ jobs:
      # step 3
      - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: report.sarif
          overwrite: true
@@ -17,7 +17,7 @@ jobs:
    steps:
      - name: Stale PR+Issues
-        uses: actions/stale@v10.2.0
+        uses: actions/stale@v10.1.1
        with:
          days-before-stale: 45
          stale-issue-message: This issue has not had any comment or update in the last month. If it is still relevant, please post update comments. If no comments are made, this issue will be closed automagically in 7 days.
@@ -16,6 +16,8 @@ jobs:
    steps:
      - uses: actions/checkout@v6
        with:
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}
          submodules: recursive
      - name: Setup native build
@@ -57,7 +59,7 @@ jobs:
        id: version
      - name: Save coverage information
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        if: always() # run this step even if previous step failed
        with:
          name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}
@@ -70,6 +72,8 @@ jobs:
    steps:
      - uses: actions/checkout@v6
        with:
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}
          submodules: recursive
      - name: Setup native build
@@ -90,7 +94,7 @@ jobs:
      - name: Save test results
        if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: platformio-test-report-${{ steps.version.outputs.long }}
          overwrite: true
@@ -104,7 +108,7 @@ jobs:
          sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.
      - name: Save coverage information
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        if: always() # run this step even if previous step failed
        with:
          name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}
@@ -124,26 +128,29 @@ jobs:
    if: always()
    steps:
      - uses: actions/checkout@v6
        with:
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}
      - name: Get release version string
        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
        id: version
      - name: Download test artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          name: platformio-test-report-${{ steps.version.outputs.long }}
          merge-multiple: true
      - name: Test Report
-        uses: dorny/test-reporter@v3.0.0
+        uses: dorny/test-reporter@v2.5.0
        with:
          name: PlatformIO Tests
          path: testreport.xml
          reporter: java-junit
      - name: Download coverage artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
        with:
          pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}
          path: code-coverage-report
@@ -156,7 +163,7 @@ jobs:
          genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report
      - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
        with:
          name: code-coverage-report-${{ steps.version.outputs.long }}
          path: code-coverage-report
@@ -52,7 +52,7 @@ jobs:
          node-version: 24
      - name: Setup pnpm
-        uses: pnpm/action-setup@v5
+        uses: pnpm/action-setup@v4
        with:
          version: latest
@@ -6,7 +6,7 @@ permissions: read-all
 jobs:
  update-protobufs:
    runs-on: ubuntu-latest
-    permissions: # Needed for peter-evans/create-pull-request.
+    permissions:
      contents: write
      pull-requests: write
    steps:
@@ -4,31 +4,31 @@ cli:
 plugins:
  sources:
    - id: trunk
-      ref: v1.7.6
+      ref: v1.7.4
      uri: https://github.com/trunk-io/plugins
 lint:
  enabled:
-    - checkov@3.2.513
+    - checkov@3.2.501
-    - renovate@43.104.1
+    - renovate@43.10.3
    - prettier@3.8.1
-    - trufflehog@3.94.2
+    - trufflehog@3.93.3
    - yamllint@1.38.0
-    - bandit@1.9.4
+    - bandit@1.9.3
-    - trivy@0.69.3
+    - trivy@0.69.1
    - taplo@0.10.0
-    - ruff@0.15.9
+    - ruff@0.15.1
-    - isort@8.0.1
+    - isort@7.0.0
-    - markdownlint@0.48.0
+    - markdownlint@0.47.0
    - oxipng@10.1.0
-    - svgo@4.0.1
+    - svgo@4.0.0
-    - actionlint@1.7.12
+    - actionlint@1.7.10
    - flake8@7.3.0
    - hadolint@2.14.0
    - shfmt@3.6.0
    - shellcheck@0.11.0
-    - black@26.3.1
+    - black@26.1.0
    - git-diff-check
-    - gitleaks@8.30.1
+    - gitleaks@8.30.0
    - clang-format@16.0.3
  ignore:
    - linters: [ALL]
@@ -1,26 +0,0 @@
 # Lightweight container for running native PlatformIO tests on non-Linux hosts
 FROM python:3.14-slim-trixie
 ENV DEBIAN_FRONTEND=noninteractive
 ENV PIP_ROOT_USER_ACTION=ignore
 # hadolint ignore=DL3008
 RUN apt-get update && apt-get install --no-install-recommends -y \
        g++ git ca-certificates pkg-config \
        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev libsdl2-dev \
    && apt-get clean && rm -rf /var/lib/apt/lists/* \
    && pip install --no-cache-dir platformio==6.1.19 \
        && useradd --create-home --shell /usr/sbin/nologin meshtastic
 WORKDIR /firmware
 RUN chown -R meshtastic:meshtastic /firmware
 HEALTHCHECK --interval=30s --timeout=5s --start-period=10s --retries=3 \
    CMD platformio --version || exit 1
 USER meshtastic
 # Run tests by default; override with docker run args for specific filters
 CMD ["platformio", "test", "-e", "coverage", "-v"]
@@ -23,4 +23,4 @@ for BOARD in $BOARDS; do
 	CHECK="${CHECK} -e ${BOARD}"
 done
-pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=low --fail-on-defect=medium --fail-on-defect=high
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high
@@ -187,7 +187,6 @@ Logging:
  LogLevel: info # debug, info, warn, error
 #  TraceFile: /var/log/meshtasticd.json
 #  JSONFile: /packets.json # File location for JSON output of decoded packets
 #  JSONFileRotate: 60 # Rotate JSON file every N minutes, or 0 for no rotation
 #  JSONFilter: position # filter for packets to save to JSON file
 #  AsciiLogs: true     # default if not specified is !isatty() on stdout
@@ -215,4 +214,3 @@ General:
  AvailableDirectory: /etc/meshtasticd/available.d/
 #  MACAddress: AA:BB:CC:DD:EE:FF
 #  MACAddressSource: eth0
 #  APIPort: 4403
@@ -1,9 +1,3 @@
 Meta:
  name: BananaPi-BPI-R4-sx1262
  support: community
  compatible:
    - bananapi_bpi-r4 # OpenWrt target
 Lora:
  Module: sx1262  # BananaPi-BPI-R4 SPI via 26p GPIO Header
 ##  CS: 28
@@ -1,10 +1,4 @@
 ##  https://www.mikroe.com/lr-iot-click
 Meta:
  name: OpenWRT One mikroBUS LR-IOT-CLICK
  support: community
  compatible:
    - openwrt_one # OpenWrt target
 Lora:
  Module: lr1110  # OpenWRT ONE mikroBUS with LR-IOT-CLICK
 #  CS: 25
@@ -1,9 +1,3 @@
 Meta:
  name: OpenWRT One mikroBUS sx1262
  support: community
  compatible:
    - openwrt_one # OpenWrt target
 Lora:
  Module: sx1262
  IRQ: 10
@@ -1,28 +0,0 @@
 # meshtasticd configuration files
 This directory contains YAML configuration files for meshtasticd. Each file describes a specific hardware configuration, including the LoRa module and pin assignments. These configurations are used by meshtasticd to correctly interface with the hardware.
 ## Metadata structure
 Each configuration file includes a `Meta` section that provides information about the configuration.
 This configuration is consumed by configuration-selection tools.
 ```yaml
 Meta:
  name: MeshAdv-Pi E22-900M30S # A unique identifier for this configuration.
  support: community # community, official, or deprecated; determined by Meshtastic Leads.
  compatible: # A list of compatible products or platforms.
    - raspberry-pi
 ```
 `name`: A unique identifier for the configuration, typically reflecting the hardware it supports.
 `support`: Indicates the level of support for this configuration. It can be one of the following:
 - `community`: Supported by the Meshtastic community. Meshtastic Members may not possess, or have not tested this configuration.
 - `official`: Fully supported by Meshtastic. Meshtastic Members have tested and verified this configuration.
 - `deprecated`: No longer recommended for deployment by Meshtastic.
 `compatible`: A list of compatible products or platforms that can use this configuration.
 This will vary depending on the intended use case / platform.
 Multiple compatible entries can be included. E.g. Armbian `BOARD` value or OpenWrt `TARGET` value.
 These tags can be consumed by different configuration-selection tools, filtering based upon their platform/etc.
@@ -1,9 +1,3 @@
 Meta:
  name: Waveshare 1.44inch LCD HAT
  support: community
  compatible:
    - raspberry-pi
 ### Waveshare 1.44inch LCD HAT
 Display:
  Panel: ST7735S
@@ -1,9 +1,3 @@
 Meta:
  name: Waveshare 2.8inch LCD HAT
  support: community
  compatible:
    - raspberry-pi
 Display:
 ### Waveshare 2.8inch RPi LCD
@@ -1,22 +1,20 @@
---
+---
-Meta:
+Lora:
-  name: Femtofox Ebyte E80-900M22S with TCXO
+## Ebyte E80-900M22S
-  support: community
+## This is a bit experimental
-  compatible:
+## 
-    - luckfox-pico-mini # Armbian
+##
-
+  Module: lr1121
-Lora:
+  gpiochip: 1 # subtract 32 from the gpio numbers
-## Ebyte E80-900M22S
+  DIO3_TCXO_VOLTAGE: 1.8
-## This is a bit experimental
+  CS: 16 #pin6 / GPIO48 1C0
-## 
+  IRQ: 23  #pin17 / GPIO55 1C7
-##
+  Busy: 22 #pin16 / GPIO54 1C6
-  Module: lr1121
+  Reset: 25 #pin13 / GPIO57 1D1
-  gpiochip: 1 # subtract 32 from the gpio numbers
+
-  DIO3_TCXO_VOLTAGE: 1.8
+
-  CS: 16 #pin6 / GPIO48 1C0
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  IRQ: 23  #pin17 / GPIO55 1C7
+  spiSpeed: 2000000
-  Busy: 22 #pin16 / GPIO54 1C6
+  
-  Reset: 25 #pin13 / GPIO57 1D1
+General:
-
+  MACAddressSource: eth0
  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
  spiSpeed: 2000000
@@ -1,24 +1,21 @@
---
+---
-Meta:
+Lora:
-  name: Femtofox SX1262 TCXO
+## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
-  support: community
+## HT-RA62 (Has internal switching, but whatever)
-  compatible:
+## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
-    - luckfox-pico-mini # Armbian
+## Will work with any module with or without RF switching, and with TCXO
-
+  Module: sx1262
-Lora:
+  gpiochip: 1 # subtract 32 from the gpio numbers
-## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
+  DIO2_AS_RF_SWITCH: true
-## HT-RA62 (Has internal switching, but whatever)
+  DIO3_TCXO_VOLTAGE: true
-## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
+  CS: 16 #pin6 / GPIO48 1C0
-## Will work with any module with or without RF switching, and with TCXO
+  IRQ: 23  #pin17 / GPIO55 1C7
-  Module: sx1262
+  Busy: 22 #pin16 / GPIO54 1C6
-  gpiochip: 1 # subtract 32 from the gpio numbers
+  Reset: 25 #pin13 / GPIO57 1D1
-  DIO2_AS_RF_SWITCH: true
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-  DIO3_TCXO_VOLTAGE: true
+#  TXen: bridge to DIO2 on E22 module
-  CS: 16 #pin6 / GPIO48 1C0
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  IRQ: 23  #pin17 / GPIO55 1C7
+  spiSpeed: 2000000
-  Busy: 22 #pin16 / GPIO54 1C6
+  
-  Reset: 25 #pin13 / GPIO57 1D1
+General:
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+  MACAddressSource: eth0
 #  TXen: bridge to DIO2 on E22 module
  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
  spiSpeed: 2000000
@@ -1,24 +1,21 @@
---
+---
-Meta:
+Lora:
-  name: Femtofox SX1262 XTAL
+## Ebyte E22-900MM22S with no external RF switching setup
-  support: community
+## Waveshare SX126X XXXM, AI Thinker RA-01SH
-  compatible:
+## Will work with any module with or without RF switching and no TCXO
-    - luckfox-pico-mini # Armbian
+
-
+  Module: sx1262  
-Lora:
+  gpiochip: 1 # subtract 32 from the gpio numbers
-## Ebyte E22-900MM22S with no external RF switching setup
+  DIO2_AS_RF_SWITCH: true
-## Waveshare SX126X XXXM, AI Thinker RA-01SH
+  DIO3_TCXO_VOLTAGE: false
-## Will work with any module with or without RF switching and no TCXO
+  CS: 16 #pin6 / GPIO48 1C0
-
+  IRQ: 23  #pin17 / GPIO55 1C7
-  Module: sx1262  
+  Busy: 22 #pin16 / GPIO54 1C6
-  gpiochip: 1 # subtract 32 from the gpio numbers
+  Reset: 25 #pin13 / GPIO57 1D1 
-  DIO2_AS_RF_SWITCH: true
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-  DIO3_TCXO_VOLTAGE: false
+#  TXen: bridge to DIO2 on E22 module
-  CS: 16 #pin6 / GPIO48 1C0
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  IRQ: 23  #pin17 / GPIO55 1C7
+  spiSpeed: 2000000
-  Busy: 22 #pin16 / GPIO54 1C6
+
-  Reset: 25 #pin13 / GPIO57 1D1 
+General:
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+  MACAddressSource: eth0
 #  TXen: bridge to DIO2 on E22 module
  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
  spiSpeed: 2000000
@@ -1,9 +1,3 @@
 Meta:
  name: Adafruit RFM9x
  support: deprecated
  compatible:
    - raspberry-pi
 Lora:
  Module: RF95  # Adafruit RFM9x
  Reset: 25
@@ -1,11 +1,5 @@
 # MeshAdv-Pi E22-900M30S
 # https://github.com/chrismyers2000/MeshAdv-Pi-Hat
 Meta:
  name: MeshAdv-Pi E22-900M30S
  support: community
  compatible:
    - raspberry-pi
 Lora:
  Module: sx1262
  CS: 21
@@ -1,11 +1,5 @@
 # MeshAdv Mini E22-900M22S
 # https://github.com/chrismyers2000/MeshAdv-Mini
 Meta:
  name: MeshAdv Mini E22-900M22S
  support: community
  compatible:
    - raspberry-pi
 Lora:
  Module: sx1262  # Ebyte E22-900M22S 
  CS: 8
@@ -1,20 +1,11 @@
 Meta:
  name: RAK6421 + RAK13300 Slot 1
  support: official
  compatible:
    - raspberry-pi
 Lora:
-  ### RAK13300 in Slot 1
+  ### RAK13300in Slot 1
  Module: sx1262
  IRQ: 22 #IO6
  Reset: 16 # IO4
  Busy: 24 # IO5
  # Ant_sw: 13 # IO3 
  Enable_Pins:
    - 12
    - 13
  DIO3_TCXO_VOLTAGE: true
  DIO2_AS_RF_SWITCH: true
  spidev: spidev0.0
@@ -1,17 +1,8 @@
 Meta:
  name: RAK6421 + RAK13300 Slot 2
  support: official
  compatible:
    - raspberry-pi
 Lora:
-  ### RAK13300 in Slot 2 pins
+  ### RAK13300in Slot 2 pins
  IRQ: 18 #IO6
  Reset: 24 # IO4
  Busy: 19 # IO5
  # Ant_sw: 23 # IO3 
  Enable_Pins:
    - 26
    - 23
  spidev: spidev0.1
  # CS: 7
@@ -1,22 +0,0 @@
 Meta:
  name: RAK6421 + RAK13302 Slot 1
  support: official
  compatible:
    - raspberry-pi
 Lora:
  ### RAK13302 in Slot 1
  Module: sx1262
  IRQ: 22 #IO6
  Reset: 16 # IO4
  Busy: 24 # IO5
  # Ant_sw: 13 # IO3 
  Enable_Pins:
    - 12
    - 13
  DIO3_TCXO_VOLTAGE: true
  DIO2_AS_RF_SWITCH: true
  spidev: spidev0.0
  # CS: 8
  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -1,18 +0,0 @@
 Meta:
  name: RAK6421 + RAK13302 Slot 2
  support: official
  compatible:
    - raspberry-pi
 Lora:
  ### RAK13302 in Slot 2 pins
  IRQ: 18 #IO6
  Reset: 24 # IO4
  Busy: 19 # IO5
  # Ant_sw: 23 # IO3 
  Enable_Pins:
    - 26
    - 23
  spidev: spidev0.1
  # CS: 7
  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -1,21 +1,11 @@
 Meta:
  name: RAK6421 + RAK13300 Slot 1 (Autoconf default)
  support: official
  compatible:
    - raspberry-pi
 Lora:
-  ### RAK13300 in Slot 1
+  ### RAK13300in Slot 1
  Module: sx1262
  IRQ: 22 #IO6
  Reset: 16 # IO4
  Busy: 24 # IO5
-  Enable_Pins:
+  # Ant_sw: 13 # IO3 
    - 12
    - 13
  DIO3_TCXO_VOLTAGE: true
  DIO2_AS_RF_SWITCH: true
  spidev: spidev0.0
  # GPIO_DETECT_PA: 13
  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -1,9 +1,3 @@
 Meta:
  name: Luckfox Lyra PicoCalc Wio LoRa SX1262
  support: official
  compatible:
    - luckfox-lyra-plus # Armbian
 Lora:
  Module: sx1262
  DIO2_AS_RF_SWITCH: true
@@ -1,23 +0,0 @@
 # For use with Armbian luckfox-lyra-ultra-w
 # Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
 # https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
 # 1 Watt Lyra Ultra hat
 Meta:
  name: wehooper4 Luckfox Ultra 1W
  support: community
  compatible:
    - luckfox-pico-ultra # Armbian
    - luckfox-lyra-ultra # Armbian
 Lora:
  Module: sx1262
  DIO2_AS_RF_SWITCH: true
  DIO3_TCXO_VOLTAGE: true
  CS: 10
  IRQ: 5
  Busy: 11
  Reset: 9
  RXen: 14
  spidev: spidev0.0 #pins are (CS=10, CLK=8, MOSI=6, MISO=7)
  spiSpeed: 2000000
@@ -1,24 +0,0 @@
 # For use with Armbian luckfox-lyra-ultra-w
 # Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
 # https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
 # 2 Watt Lyra Ultra hat
 Meta:
  name: wehooper4 Luckfox Ultra 2W
  support: community
  compatible:
    - luckfox-pico-ultra # Armbian
    - luckfox-lyra-ultra # Armbian
 Lora:
  Module: sx1262
  DIO2_AS_RF_SWITCH: true
  DIO3_TCXO_VOLTAGE: true
  SX126X_MAX_POWER: 8
  CS: 10
  IRQ: 5
  Busy: 11
  Reset: 9
  RXen: 14
  spidev: spidev0.0 #pins are (CS=10, CLK=8, MOSI=6, MISO=7)
  spiSpeed: 2000000
@@ -1,31 +0,0 @@
 # For use with Armbian luckfox-lyra // luckfox-lyra-plus
 # Enable overlay 'luckfox-lyra-plus-spi0-cs0_rmio13-spidev' with armbian-config
 # Waveshare LoRa HAT for Raspberry Pi Pico
 # https://www.waveshare.com/wiki/Pico-LoRa-SX1262
 Meta:
  name: Waveshare LoRa HAT for Raspberry Pi Pico
  support: community
  compatible:
    - luckfox-lyra-plus # Armbian
 Lora:
  Module: sx1262
  DIO2_AS_RF_SWITCH: true
  DIO3_TCXO_VOLTAGE: true
  spidev: spidev0.0
  CS: # GPIO0_B5
    pin: 13
    gpiochip: 0
    line: 13
  IRQ: # GPIO1_C2
    pin: 50
    gpiochip: 1
    line: 18
  Busy: # GPIO0_B4
    pin: 12
    gpiochip: 0
    line: 12
  Reset: # GPIO0_A2
    pin: 2
    gpiochip: 0
    line: 2
@@ -1,39 +0,0 @@
 # MeshAdv-Pi E22-900M30S
 # https://github.com/chrismyers2000/MeshAdv-Pi-Hat
 Meta:
  name: MeshAdv-Pi E22-900M30S
  support: community
  compatible:
    - luckfox-lyra-zero-w # Armbian
 Lora:
  Module: sx1262
  CS: # GPIO0_C2 (physical 40)
    pin: 18
    gpiochip: 0
    line: 18
  IRQ: # GPIO1_D1 (physical 36)
    pin: 57
    gpiochip: 1
    line: 25
  Busy: # GPIO0_C1 (physical 38)
    pin: 17
    gpiochip: 0
    line: 17
  Reset: # GPIO0_B6 (physical 12)
    pin: 14
    gpiochip: 0
    line: 14
  TXen: # GPIO1_C2 (physical 33)
    pin: 50
    gpiochip: 1
    line: 18
  RXen: # GPIO1_D2 (physical 32)
    pin: 58
    gpiochip: 1
    line: 26
  DIO3_TCXO_VOLTAGE: true
  # Only for E22-900M33S:
  # Limit the output power to 8 dBm
  # SX126X_MAX_POWER: 8
  spidev: spidev0.0
@@ -1,33 +0,0 @@
 # MeshAdv Mini E22-900M22S
 # https://github.com/chrismyers2000/MeshAdv-Mini
 Meta:
  name: MeshAdv Mini E22-900M22S
  support: community
  compatible:
    - luckfox-lyra-zero-w # Armbian
 Lora:
  Module: sx1262 # Ebyte E22-900M22S
  CS: # GPIO0_B2_d (phys 24, RPi CE0)
    pin: 10
    gpiochip: 0
    line: 10
  IRQ: # GPIO1_D1_d (phys 36, RPi GPIO16)
    pin: 57
    gpiochip: 1
    line: 25
  Busy: # GPIO0_C1_d (phys 38, RPi GPIO20)
    pin: 17
    gpiochip: 0
    line: 17
  Reset: # GPIO0_B4_d (phys 18, RPi GPIO24)
    pin: 12
    gpiochip: 0
    line: 12
  RXen: # GPIO1_D2_d (phys 32, RPi GPIO12)
    pin: 58
    gpiochip: 1
    line: 26
  DIO2_AS_RF_SWITCH: true
  DIO3_TCXO_VOLTAGE: true
  spidev: spidev0.0
@@ -1,38 +0,0 @@
 Meta:
  name: RAK6421 + RAK13300 Slot 1
  support: community # Promote when tested
  compatible:
    - luckfox-lyra-zero-w # Armbian
 Lora:
  Module: sx1262
  IRQ: # GPIO0_A5 (IO6)
    pin: 5
    gpiochip: 0
    line: 5
  Reset: # GPIO1_D1 (IO4)
    pin: 57
    gpiochip: 1
    line: 25
  Busy: # GPIO0_B4 (IO5)
    pin: 12
    gpiochip: 0
    line: 12
  # Ant_sw: # GPIO1_C2 (IO3)
  #   pin: 50
  #   gpiochip: 1
  #   line: 18
  Enable_Pins:
    - pin: 58 # GPIO1_D2
      gpiochip: 1
      line: 26
    - pin: 50 # GPIO1_C2
      gpiochip: 1
      line: 18
  DIO3_TCXO_VOLTAGE: true
  DIO2_AS_RF_SWITCH: true
  spidev: spidev0.0
  # CS: # GPIO0_B2
  #   pin: 10
  #   gpiochip: 0
  #   line: 10
@@ -1,36 +0,0 @@
 Meta:
  name: RAK6421 + RAK13300 Slot 2
  support: community # Promote when tested
  compatible:
    - luckfox-lyra-zero-w # Armbian
 Lora:
  Module: sx1262
  IRQ: # GPIO0_B6 (IO6)
    pin: 14
    gpiochip: 0
    line: 14
  Reset: # GPIO0_B4 (IO4)
    pin: 12
    gpiochip: 0
    line: 12
  Busy: # GPIO1_C0 (IO5)
    pin: 48
    gpiochip: 1
    line: 16
  # Ant_sw: # GPIO0_B5 (IO3)
  #   pin: 13
  #   gpiochip: 0
  #   line: 13
  Enable_Pins:
    - pin: 51 # GPIO1_C3
      gpiochip: 1
      line: 19
    - pin: 13 # GPIO0_B5
      gpiochip: 0
      line: 13
  spidev: spidev0.1
  # CS: # GPIO0_B1
  #   pin: 9
  #   gpiochip: 0
  #   line: 9
@@ -1,39 +0,0 @@
 Meta:
  name: RAK6421 + RAK13300 Slot 1
  support: community # Promote when tested
  compatible:
    - luckfox-lyra-zero-w # Armbian
 Lora:
  Module: sx1262
  IRQ: # GPIO0_A5 (IO6)
    pin: 5
    gpiochip: 0
    line: 5
  Reset: # GPIO1_D1 (IO4)
    pin: 57
    gpiochip: 1
    line: 25
  Busy: # GPIO0_B4 (IO5)
    pin: 12
    gpiochip: 0
    line: 12
  # Ant_sw: # GPIO1_C2 (IO3)
  #   pin: 50
  #   gpiochip: 1
  #   line: 18
  Enable_Pins:
    - pin: 58 # GPIO1_D2
      gpiochip: 1
      line: 26
    - pin: 50 # GPIO1_C2
      gpiochip: 1
      line: 18
  DIO3_TCXO_VOLTAGE: true
  DIO2_AS_RF_SWITCH: true
  spidev: spidev0.0
  # CS: # GPIO0_B2
  #   pin: 10
  #   gpiochip: 0
  #   line: 10
  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -1,37 +0,0 @@
 Meta:
  name: RAK6421 + RAK13300 Slot 2
  support: community # Promote when tested
  compatible:
    - luckfox-lyra-zero-w # Armbian
 Lora:
  Module: sx1262
  IRQ: # GPIO0_B6 (IO6)
    pin: 14
    gpiochip: 0
    line: 14
  Reset: # GPIO0_B4 (IO4)
    pin: 12
    gpiochip: 0
    line: 12
  Busy: # GPIO1_C0 (IO5)
    pin: 48
    gpiochip: 1
    line: 16
  # Ant_sw: # GPIO0_B5 (IO3)
  #   pin: 13
  #   gpiochip: 0
  #   line: 13
  Enable_Pins:
    - pin: 51 # GPIO1_C3
      gpiochip: 1
      line: 19
    - pin: 13 # GPIO0_B5
      gpiochip: 0
      line: 13
  spidev: spidev0.1
  # CS: # GPIO0_B1
  #   pin: 9
  #   gpiochip: 0
  #   line: 9
  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -1,30 +0,0 @@
 Meta:
  name: Waveshare SX1262
  support: deprecated
  compatible:
    - luckfox-lyra-zero-w # Armbian
 Lora:
  Module: sx1262  # Waveshare SX126X XXXM
  DIO2_AS_RF_SWITCH: true
  CS: # GPIO0_C2 (physical 40)
    pin: 18
    gpiochip: 0
    line: 18
  IRQ: # GPIO1_D1 (physical 36)
    pin: 57
    gpiochip: 1
    line: 25
  Busy: # GPIO0_C1 (physical 38)
    pin: 17
    gpiochip: 0
    line: 17
  Reset: # GPIO0_B6 (physical 12)
    pin: 14
    gpiochip: 0
    line: 14
  SX126X_ANT_SW: # GPIO1_B3 (physical 31)
    pin: 43
    gpiochip: 1
    line: 11
  spidev: spidev0.0
@@ -1,9 +1,3 @@
 Meta:
  name: Lora Meshstick SX1262
  support: official
  compatible:
    - usb
 Lora:
  Module: sx1262
  CS: 0
@@ -1,9 +1,3 @@
 Meta:
  name: Lora Meshstick SX1262
  support: community
  compatible:
    - usb
 Lora:
  Module: lr1121
  CS: 0
@@ -1,11 +1,5 @@
 Meta:
  name: Pinedio USB SX1262
  support: deprecated
  compatible:
    - usb
 Lora:
  Module: sx1262
  CS: 0 
  IRQ: 10
-  spidev: ch341
+  spidev: ch341
@@ -1,9 +1,3 @@
 Meta:
  name: raxda-rock2f-starter-edition-hat
  support: community
  compatible:
    - rock-2f # Armbian
 Lora:
 ### Raxda Rock 2F running Armbian Linux 6.1.99-vendor-rk35xx
@@ -1,11 +1,5 @@
 # https://www.waveshare.com/core1262-868m.htm
 # https://github.com/markbirss/lora-starter-edition-sx1262-i2c
 Meta:
  name: lora-starter-edition-sx1262-i2c
  support: community
  compatible:
    - raspberry-pi
 Lora:
  Module: sx1262  # Starter Edition SX1262 I2C Raspberry Pi HAT
  DIO2_AS_RF_SWITCH: true
@@ -1,9 +1,3 @@
 Meta:
  name: meshstick-1262
  support: official
  compatible:
    - usb
 Lora:
  Module: sx1262
  CS: 0
@@ -1,9 +1,3 @@
 Meta:
  name: meshtoad-e22
  support: official
  compatible:
    - usb
 Lora:
  Module: sx1262
  CS: 0
@@ -1,9 +1,3 @@
 Meta:
  name: umesh-1262-30dbm
  support: community
  compatible:
    - clockwork-uconsole
 Lora:
  Module: sx1262
  CS: 0
@@ -19,7 +13,8 @@ Lora:
 #  USB_Serialnum: 12345678
  SX126X_MAX_POWER: 22
 # Reduce output power to improve EMI
-  TX_GAIN_LORA: [12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7]
+  NUM_PA_POINTS: 22
  TX_GAIN_LORA: 12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7
 # Note: This module integrates an additional PA to achieve higher output power.
 # The 'power' parameter here does not represent the actual RF output.
 # TX_GAIN_LORA defines the gain offset applied at each SX1262 input power step (1–22 dBm).
@@ -1,9 +1,3 @@
 Meta:
  name: umesh-1268-30dbm
  support: community
  compatible:
    - clockwork-uconsole
 Lora:
  Module: sx1268
  CS: 0
@@ -19,7 +13,8 @@ Lora:
 #  USB_Serialnum: 12345678
  SX126X_MAX_POWER: 22
 # Reduce output power to improve EMI
-  TX_GAIN_LORA: [12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7]
+  NUM_PA_POINTS: 22
  TX_GAIN_LORA: 12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7
 # Note: This module integrates an additional PA to achieve higher output power.
 # The 'power' parameter here does not represent the actual RF output.
 # TX_GAIN_LORA defines the gain offset applied at each SX1262 input power step (1–22 dBm).
@@ -1,9 +1,3 @@
 Meta:
  name: Waveshare SX1262
  support: deprecated
  compatible:
    - raspberry-pi
 Lora:
  Module: sx1262  # Waveshare SX126X XXXM
  DIO2_AS_RF_SWITCH: true
@@ -1,12 +1,5 @@
 # https://www.waveshare.com/pico-lora-sx1262-868m.htm
 # https://github.com/markbirss/lora-ws-raspberry-pi-pico-to-rpi-adapter
 Meta:
  name: ws-raspberry-pico-to-rpi-adapter
  support: community
  compatible:
    - raspberry-pi
 Lora:
  Module: sx1262  # Waveshare Raspberry Pi Pico to Raspberry Pi HAT Adapter
  DIO2_AS_RF_SWITCH: true
@@ -15,12 +15,6 @@
 #   5     CS          24
 #   26    DIO1/IRQ    26
 Meta:
  name: ws-raspberry-pico-to-orangepi-03
  support: community
  compatible:
    - orange-pi-zero-3 # Armbian
 Lora:
  Module: sx1262  # Waveshare Raspberry Pico Lora module
  DIO2_AS_RF_SWITCH: true
@@ -43,7 +43,7 @@ for pio_env in pio_envs:
  env = {
    "ci": {"board": pio_env, "platform": env_platform},
    "board_level": cfg.get(f"env:{pio_env}", "board_level", default=None),
-    "board_check": cfg.get(f"env:{pio_env}", "board_check", default="false").strip().lower() == "true",
+    "board_check": bool(cfg.get(f"env:{pio_env}", "board_check", default=False)),
  }
  all_envs.append(env)
@@ -87,9 +87,6 @@
  </screenshots>
  <releases>
    <release version="2.7.21" date="2026-03-11">
      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.21</url>
    </release>
    <release version="2.7.20" date="2026-02-11">
      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.20</url>
    </release>
@@ -1,44 +0,0 @@
 #!/usr/bin/env bash
 # Run native PlatformIO tests inside Docker (for macOS / non-Linux hosts).
 #
 # Usage:
 #   ./bin/test-native-docker.sh                          # run all native tests
 #   ./bin/test-native-docker.sh -f test_transmit_history  # run specific test filter
 #   ./bin/test-native-docker.sh --rebuild                 # force rebuild the image
 #
 set -euo pipefail
 SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
 ROOT_DIR="$(cd "$SCRIPT_DIR/.." && pwd)"
 IMAGE_NAME="meshtastic-native-test"
 REBUILD=false
 EXTRA_ARGS=()
 for arg in "$@"; do
    if [[ "$arg" == "--rebuild" ]]; then
        REBUILD=true
    else
        EXTRA_ARGS+=("$arg")
    fi
 done
 if $REBUILD || ! docker image inspect "$IMAGE_NAME" >/dev/null 2>&1; then
    echo "Building test image (first run may take a few minutes)..."
    docker build -t "$IMAGE_NAME" -f "$ROOT_DIR/Dockerfile.test" "$ROOT_DIR"
 fi
 # Disable BUILD_EPOCH to avoid full rebuilds between test runs (matches CI)
 sed_cmd='s/-DBUILD_EPOCH=$UNIX_TIME/#-DBUILD_EPOCH=$UNIX_TIME/'
 # Default: run all tests. Pass extra args (e.g. -f test_transmit_history) through.
 if [[ ${#EXTRA_ARGS[@]} -eq 0 ]]; then
    CMD=("platformio" "test" "-e" "coverage" "-v")
 else
    CMD=("platformio" "test" "-e" "coverage" "-v" "${EXTRA_ARGS[@]}")
 fi
 exec docker run --rm \
    -v "$ROOT_DIR:/src:ro" \
    "$IMAGE_NAME" \
    bash -c "rm -rf /tmp/fw-test && cp -a /src /tmp/fw-test && cd /tmp/fw-test && sed -i '${sed_cmd}' platformio.ini && ${CMD[*]}"
@@ -1,54 +0,0 @@
 {
  "build": {
    "arduino": {
      "ldscript": "nrf52840_s140_v6.ld"
    },
    "core": "nRF5",
    "cpu": "cortex-m4",
    "extra_flags": "-DNRF52840_XXAA",
    "f_cpu": "64000000L",
    "hwids": [
      ["0x239A", "0x4405"],
      ["0x239A", "0x0029"],
      ["0x239A", "0x002A"],
      ["0x2886", "0x1667"]
    ],
    "usb_product": "HT-n5262G",
    "mcu": "nrf52840",
    "variant": "heltec_mesh_node_t096",
    "variants_dir": "variants",
    "bsp": {
      "name": "adafruit"
    },
    "softdevice": {
      "sd_flags": "-DS140",
      "sd_name": "s140",
      "sd_version": "6.1.1",
      "sd_fwid": "0x00B6"
    },
    "bootloader": {
      "settings_addr": "0xFF000"
    }
  },
  "connectivity": ["bluetooth"],
  "debug": {
    "jlink_device": "nRF52840_xxAA",
    "onboard_tools": ["jlink"],
    "svd_path": "nrf52840.svd",
    "openocd_target": "nrf52840-mdk-rs"
  },
  "frameworks": ["arduino"],
  "name": "Heltec nrf (Adafruit BSP)",
  "upload": {
    "maximum_ram_size": 248832,
    "maximum_size": 815104,
    "speed": 115200,
    "protocol": "nrfutil",
    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
    "use_1200bps_touch": true,
    "require_upload_port": true,
    "wait_for_upload_port": true
  },
  "url": "https://heltec.org/",
  "vendor": "Heltec"
 }
@@ -1,40 +0,0 @@
 {
  "build": {
    "arduino": {
      "ldscript": "esp32s3_out.ld",
      "partitions": "default.csv"
    },
    "core": "esp32",
    "extra_flags": [
      "-DBOARD_HAS_PSRAM",
      "-DARDUINO_ESP32S3_DEV",
      "-DARDUINO_USB_MODE=1",
      "-DARDUINO_USB_CDC_ON_BOOT=1",
      "-DARDUINO_RUNNING_CORE=1",
      "-DARDUINO_EVENT_RUNNING_CORE=1"
    ],
    "f_cpu": "240000000L",
    "f_flash": "80000000L",
    "flash_mode": "qio",
    "hwids": [["0x303A", "0x1001"]],
    "mcu": "esp32s3",
    "variant": "esp32s3"
  },
  "connectivity": ["wifi"],
  "debug": {
    "default_tool": "esp-builtin",
    "onboard_tools": ["esp-builtin"],
    "openocd_target": "esp32s3.cfg"
  },
  "frameworks": ["arduino", "espidf"],
  "name": "LilyGo Mini-Epaper-S3 (4 MB Flash, 2MB PSRAM)",
  "upload": {
    "flash_size": "4MB",
    "maximum_ram_size": 327680,
    "maximum_size": 4194304,
    "require_upload_port": true,
    "speed": 460800
  },
  "url": "https://www.lilygo.cc",
  "vendor": "LilyGo"
 }
@@ -1,38 +0,0 @@
 {
  "build": {
    "arduino": {
      "ldscript": "esp32s3_out.ld",
      "memory_type": "qio_opi",
      "partitions": "default_16MB.csv"
    },
    "core": "esp32",
    "extra_flags": [
      "-DBOARD_HAS_PSRAM",
      "-DARDUINO_RUNNING_CORE=1",
      "-DARDUINO_EVENT_RUNNING_CORE=0",
      "-DARDUINO_USB_CDC_ON_BOOT=1",
      "-DARDUINO_USB_MODE=1"
    ],
    "f_cpu": "240000000L",
    "f_flash": "80000000L",
    "flash_mode": "qio",
    "hwids": [["0x303A", "0x1001"]],
    "mcu": "esp32s3",
    "variant": "esp32s3"
  },
  "connectivity": ["wifi", "bluetooth", "lora"],
  "debug": {
    "openocd_target": "esp32s3.cfg"
  },
  "frameworks": ["arduino", "espidf"],
  "name": "LilyGo T5-ePaper-S3",
  "upload": {
    "flash_size": "16MB",
    "maximum_ram_size": 327680,
    "maximum_size": 16777216,
    "require_upload_port": true,
    "speed": 921600
  },
  "url": "https://lilygo.cc/products/t5-e-paper-s3-pro",
  "vendor": "LILYGO"
 }
@@ -1,29 +0,0 @@
 {
  "build": {
    "arduino": {
      "ldscript": "esp32_out.ld"
    },
    "core": "esp32",
    "extra_flags": "-DARDUINO_T_Beam",
    "f_cpu": "240000000L",
    "f_flash": "40000000L",
    "flash_mode": "dio",
    "mcu": "esp32",
    "variant": "tbeam"
  },
  "connectivity": ["wifi", "bluetooth", "can", "ethernet"],
  "debug": {
    "openocd_board": "esp-wroom-32.cfg"
  },
  "frameworks": ["arduino", "espidf"],
  "name": "TTGO T-Beam (PSRAM Disabled)",
  "upload": {
    "flash_size": "4MB",
    "maximum_ram_size": 1310720,
    "maximum_size": 4194304,
    "require_upload_port": true,
    "speed": 460800
  },
  "url": "https://github.com/LilyGO/TTGO-T-Beam",
  "vendor": "TTGO"
 }
@@ -12,6 +12,6 @@ Ex:
 - `logo_320x480.png`
 - `logo_320x240.png`
-This file is copied to `data/boot/logo.png` before filesystem image compilation.
+This file is copied to `data/boot/logo.png` before filesytem image compilation.
 For additional examples see the [`event/defcon33` branch](https://github.com/meshtastic/firmware/tree/event/defcon33).
@@ -1,9 +1,3 @@
 meshtasticd (2.7.21.0) unstable; urgency=medium
  * Version 2.7.21
 -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Wed, 11 Mar 2026 11:45:36 +0000
 meshtasticd (2.7.20.0) unstable; urgency=medium
  * Version 2.7.20
@@ -3,17 +3,10 @@ export DEBEMAIL="jbennett@incomsystems.biz"
 export PLATFORMIO_LIBDEPS_DIR=pio/libdeps
 export PLATFORMIO_PACKAGES_DIR=pio/packages
 export PLATFORMIO_CORE_DIR=pio/core
 export PLATFORMIO_SETTING_ENABLE_TELEMETRY=0
 export PLATFORMIO_SETTING_CHECK_PLATFORMIO_INTERVAL=3650
 export PLATFORMIO_SETTING_CHECK_PRUNE_SYSTEM_THRESHOLD=10240
 # Download libraries to `pio`
 platformio pkg install -e native-tft
 platformio pkg install -e native-tft -t platformio/tool-scons@4.40502.0
 # Mangle PlatformIO cache to prevent internet access at build-time
 # Simply adds 1 to all expiry (epoch) timestamps, adding ~500 years to expiry date
 cp pio/core/.cache/downloads/usage.db pio/core/.cache/downloads/usage.db.bak
 jq -c 'with_entries(.value |= (. | tostring + "1" | tonumber))' pio/core/.cache/downloads/usage.db.bak >pio/core/.cache/downloads/usage.db
 # Compress `pio` directory to prevent dh_clean from sanitizing it
 tar -cf pio.tar pio/
 rm -rf pio
@@ -27,10 +20,5 @@ rm -rf debian/changelog
 dch --create --distribution "$SERIES" --package "$package" --newversion "$PKG_VERSION~$SERIES" \
 	"GitHub Actions Automatic packaging for $PKG_VERSION~$SERIES"
-if [[ -n $GPG_KEY_ID ]]; then
+# Build the source deb
-	# Build and sign the source deb
+debuild -S -nc -k"$GPG_KEY_ID"
 	debuild -S -nc -k"$GPG_KEY_ID"
 else
 	# Build the source deb without signing (forks)
 	debuild -S -nc
 fi
@@ -9,10 +9,7 @@
 PIO_ENV:=\
 	PLATFORMIO_CORE_DIR=pio/core \
 	PLATFORMIO_LIBDEPS_DIR=pio/libdeps \
-	PLATFORMIO_PACKAGES_DIR=pio/packages \
+	PLATFORMIO_PACKAGES_DIR=pio/packages
 	PLATFORMIO_SETTING_ENABLE_TELEMETRY=0 \
 	PLATFORMIO_SETTING_CHECK_PLATFORMIO_INTERVAL=3650 \
 	PLATFORMIO_SETTING_CHECK_PRUNE_SYSTEM_THRESHOLD=10240
 # Raspbian armhf builds should be compatible with armv6-hardfloat
 # https://www.valvers.com/open-software/raspberry-pi/bare-metal-programming-in-c-part-1/#rpi1-compiler-flags
@@ -77,10 +77,10 @@ lib_deps =
 	https://github.com/meshtastic/TinyGPSPlus/archive/71a82db35f3b973440044c476d4bcdc673b104f4.zip
 	# renovate: datasource=git-refs depName=meshtastic-ArduinoThread packageName=https://github.com/meshtastic/ArduinoThread gitBranch=master
 	https://github.com/meshtastic/ArduinoThread/archive/b841b0415721f1341ea41cccfb4adccfaf951567.zip
-	# renovate: datasource=github-tags depName=Nanopb packageName=nanopb/nanopb
+	# renovate: datasource=custom.pio depName=Nanopb packageName=nanopb/library/Nanopb
-	https://github.com/nanopb/nanopb/archive/refs/tags/nanopb-0.4.9.1.zip
+	nanopb/Nanopb@0.4.91
-	# renovate: datasource=github-tags depName=ErriezCRC32 packageName=Erriez/ErriezCRC32
+	# renovate: datasource=custom.pio depName=ErriezCRC32 packageName=erriez/library/ErriezCRC32
-	https://github.com/Erriez/ErriezCRC32/archive/refs/tags/1.0.1.zip
+	erriez/ErriezCRC32@1.0.1
 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck
@@ -95,38 +95,34 @@ check_flags =
 framework = arduino
 lib_deps =
 	${env.lib_deps}
-	# renovate: datasource=github-tags depName=NonBlockingRTTTL packageName=end2endzone/NonBlockingRTTTL
+	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=end2endzone/library/NonBlockingRTTTL
-	https://github.com/end2endzone/NonBlockingRTTTL/archive/refs/tags/1.4.0.zip
+	end2endzone/NonBlockingRTTTL@1.4.0
 build_unflags =
 	-std=c++11
 	-std=gnu++11
 build_flags = ${env.build_flags} -Os
 	-std=gnu++17
 build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/niche/>
 ; Common libs for communicating over TCP/IP networks such as MQTT
 [networking_base]
 lib_deps =
-	# renovate: datasource=github-tags depName=TBPubSubClient packageName=thingsboard/pubsubclient
+	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
-	https://github.com/thingsboard/pubsubclient/archive/refs/tags/v2.12.1.zip
+	thingsboard/TBPubSubClient@2.12.1
-	# renovate: datasource=github-tags depName=NTPClient packageName=arduino-libraries/NTPClient
+	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
-	https://github.com/arduino-libraries/NTPClient/archive/refs/tags/3.2.1.zip
+	arduino-libraries/NTPClient@3.2.1
 ; Extra TCP/IP networking libs for supported devices
 [networking_extra]
 lib_deps =
-	# renovate: datasource=github-tags depName=Syslog packageName=arcao/Syslog
+	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
-	https://github.com/arcao/Syslog/archive/refs/tags/v2.0.zip
+	arcao/Syslog@2.0.0
 [radiolib_base]
 lib_deps =
-	# renovate: datasource=github-tags depName=RadioLib packageName=jgromes/RadioLib
+	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	https://github.com/jgromes/RadioLib/archive/refs/tags/7.6.0.zip
+	jgromes/RadioLib@7.6.0
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/1897dd17fceb1f101bb1a3245680aa3439edcfdd.zip
+	https://github.com/meshtastic/device-ui/archive/6c75195e9987b7a49563232234f2f868dd343cae.zip
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -142,7 +138,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit BME280 packageName=adafruit/library/Adafruit BME280 Library
 	adafruit/Adafruit BME280 Library@2.3.0
 	# renovate: datasource=custom.pio depName=Adafruit DPS310 packageName=adafruit/library/Adafruit DPS310
-	adafruit/Adafruit DPS310@1.1.6
+	adafruit/Adafruit DPS310@1.1.5
 	# renovate: datasource=custom.pio depName=Adafruit MCP9808 packageName=adafruit/library/Adafruit MCP9808 Library
 	adafruit/Adafruit MCP9808 Library@2.0.2
 	# renovate: datasource=custom.pio depName=Adafruit INA260 packageName=adafruit/library/Adafruit INA260 Library
@@ -154,7 +150,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit LIS3DH packageName=adafruit/library/Adafruit LIS3DH
 	adafruit/Adafruit LIS3DH@1.3.0
 	# renovate: datasource=custom.pio depName=Adafruit AHTX0 packageName=adafruit/library/Adafruit AHTX0
-	adafruit/Adafruit AHTX0@2.0.6
+	adafruit/Adafruit AHTX0@2.0.5
 	# renovate: datasource=custom.pio depName=Adafruit LSM6DS packageName=adafruit/library/Adafruit LSM6DS
 	adafruit/Adafruit LSM6DS@4.7.4
 	# renovate: datasource=custom.pio depName=Adafruit TSL2591 packageName=adafruit/library/Adafruit TSL2591 Library
@@ -162,7 +158,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=EmotiBit MLX90632 packageName=emotibit/library/EmotiBit MLX90632
 	emotibit/EmotiBit MLX90632@1.0.8
 	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
-	adafruit/Adafruit MLX90614 Library@2.1.6
+	adafruit/Adafruit MLX90614 Library@2.1.5
 	# renovate: datasource=git-refs depName=INA3221 packageName=https://github.com/sgtwilko/INA3221 gitBranch=FixOverflow
 	https://github.com/sgtwilko/INA3221/archive/bb03d7e9bfcc74fc798838a54f4f99738f29fc6a.zip
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
@@ -184,7 +180,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
 	dfrobot/DFRobot_BMM150@1.0.0
 	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
-	adafruit/Adafruit TSL2561@1.1.3
+	adafruit/Adafruit TSL2561@1.1.2
 	# renovate: datasource=custom.pio depName=BH1750_WE packageName=wollewald/library/BH1750_WE
 	wollewald/BH1750_WE@1.1.10
@@ -233,5 +229,5 @@ lib_deps =
 [environmental_extra_no_bsec]
 lib_deps =
 	${environmental_extra_common.lib_deps}
-	# renovate: datasource=custom.pio depName=Adafruit_BME680 packageName=adafruit/library/Adafruit BME680 Library
+	# renovate: datasource=custom.pio depName=adafruit/Adafruit BME680 Library packageName=adafruit/library/Adafruit BME680
-	adafruit/Adafruit BME680 Library@2.0.6
+	adafruit/Adafruit BME680 Library@^2.0.5
@@ -4,8 +4,6 @@
    ":dependencyDashboard",
    ":semanticCommitTypeAll(chore)",
    ":ignoreModulesAndTests",
    ":noUnscheduledUpdates",
    "schedule:daily",
    "group:recommended",
    "replacements:all",
    "workarounds:all"
@@ -51,7 +51,9 @@ class AudioThread : public concurrency::OSThread
            i2sRtttl = nullptr;
        }
-        rtttlFile = nullptr;
+        if (rtttlFile != nullptr) {
            rtttlFile = nullptr;
        }
        setCPUFast(false);
 #ifdef T_LORA_PAGER
@@ -98,6 +98,7 @@ Syslog &Syslog::logMask(uint8_t priMask)
 void Syslog::enable()
 {
    this->_client->begin(this->_port);
    this->_enabled = true;
 }
@@ -165,21 +166,14 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
    if ((pri & LOG_FACMASK) == 0)
        pri = LOG_MAKEPRI(LOG_FAC(this->_priDefault), pri);
    // W5100S: acquire UDP socket on-demand to avoid permanent socket consumption
    if (!this->_client->begin(this->_port)) {
        return false;
    }
    if (this->_server != NULL) {
        result = this->_client->beginPacket(this->_server, this->_port);
    } else {
        result = this->_client->beginPacket(this->_ip, this->_port);
    }
-    if (result != 1) {
+    if (result != 1)
        this->_client->stop();
        return false;
    }
    this->_client->print('<');
    this->_client->print(pri);
@@ -199,8 +193,6 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
    this->_client->print(message);
    this->_client->endPacket();
    this->_client->stop(); // W5100S: release UDP socket for other services
    return true;
 }
@@ -35,11 +35,6 @@
 #include "nrfx_power.h"
 #endif
 #if defined(ARCH_NRF52)
 #include "Nrf52SaadcLock.h"
 #include "concurrency/LockGuard.h"
 #endif
 #if defined(DEBUG_HEAP_MQTT) && !MESHTASTIC_EXCLUDE_MQTT
 #include "mqtt/MQTT.h"
 #include "target_specific.h"
@@ -333,9 +328,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
            scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
            scaled *= operativeAdcMultiplier;
 #else // block for all other platforms
 #ifdef ARCH_NRF52
            concurrency::LockGuard saadcGuard(concurrency::nrf52SaadcLock);
 #endif
            for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
                raw += analogRead(BATTERY_PIN);
            }
@@ -38,10 +38,7 @@ static bool isPowered()
    return true;
 #endif
-    bool isRouter = ((config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ||
+    bool isRouter = (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ? 1 : 0);
                      config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER_LATE)
                         ? 1
                         : 0);
    // If we are not a router and we already have AC power go to POWER state after init, otherwise go to ON
    // We assume routers might be powered all the time, but from a low current (solar) source
@@ -265,10 +262,7 @@ Fsm powerFSM(&stateBOOT);
 void PowerFSM_setup()
 {
-    bool isRouter = ((config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ||
+    bool isRouter = (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ? 1 : 0);
                      config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER_LATE)
                         ? 1
                         : 0);
    bool hasPower = isPowered();
    LOG_INFO("PowerFSM init, USB power=%d", hasPower ? 1 : 0);
@@ -345,7 +345,7 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
    return;
 }
-void RedirectablePrint::hexDump(const char *logLevel, const unsigned char *buf, uint16_t len)
+void RedirectablePrint::hexDump(const char *logLevel, unsigned char *buf, uint16_t len)
 {
    const char alphabet[17] = "0123456789abcdef";
    log(logLevel, "    +------------------------------------------------+ +----------------+");
@@ -44,7 +44,7 @@ class RedirectablePrint : public Print
    /** like printf but va_list based */
    size_t vprintf(const char *logLevel, const char *format, va_list arg);
-    void hexDump(const char *logLevel, const unsigned char *buf, uint16_t len);
+    void hexDump(const char *logLevel, unsigned char *buf, uint16_t len);
    std::string mt_sprintf(const std::string fmt_str, ...);
@@ -35,8 +35,6 @@ void consoleInit()
 #if defined(SERIAL_HAS_ON_RECEIVE)
    // onReceive does only exist for HardwareSerial not for USB CDC serial
    Port.onReceive([sc]() { sc->rxInt(); });
 #else
    (void)sc;
 #endif
    DEBUG_PORT.rpInit(); // Simply sets up semaphore
 }
@@ -6,11 +6,6 @@
 #include "Tone.h"
 #endif
 #if defined(HAS_I2S)
 #include "main.h"
 #include <unordered_map>
 #endif
 #if !defined(ARCH_PORTDUINO)
 extern "C" void delay(uint32_t dwMs);
 #endif
@@ -55,50 +50,6 @@ const int DURATION_1_2 = 500;  // 1/2 note
 const int DURATION_3_4 = 750;  // 3/4 note
 const int DURATION_1_1 = 1000; // 1/1 note
 #ifdef HAS_I2S
 void playTonesRTTTL(const ToneDuration *tone_durations, int size)
 {
    // translate ToneDuration[] to RTTTL string and play using audioThread
    static std::unordered_map<int, std::string> freqToNote = {
        {NOTE_C3, "c4"},   {NOTE_CS3, "c#4"}, {NOTE_D3, "d4"},   {NOTE_DS3, "d#4"}, {NOTE_E3, "e4"},   {NOTE_F3, "f4"},
        {NOTE_FS3, "f#4"}, {NOTE_G3, "g4"},   {NOTE_GS3, "g#4"}, {NOTE_A3, "a4"},   {NOTE_AS3, "a#4"}, {NOTE_B3, "b4"},
        {NOTE_C4, "c5"},   {NOTE_E4, "e5"},   {NOTE_G4, "g5"},   {NOTE_A4, "a5"},   {NOTE_C5, "c6"},   {NOTE_E5, "e6"},
        {NOTE_G5, "g6"},   {NOTE_F5, "f6"},   {NOTE_G6, "g7"},   {NOTE_E7, "e8"}};
    char rtttl[128] = "tone:d=32,o=4,b=200:"; // default duration and octave
    for (int i = 0; i < size; i++) {
        const auto &td = tone_durations[i];
        std::string note = "b4";
        if (freqToNote.find(td.frequency_khz) != freqToNote.end()) {
            note = freqToNote[td.frequency_khz];
        }
        int dur = 32; // default duration
        if (td.duration_ms >= 1000)
            dur = 1;
        else if (td.duration_ms >= 500)
            dur = 2;
        else if (td.duration_ms >= 250)
            dur = 4;
        else if (td.duration_ms >= 125)
            dur = 8;
        else if (td.duration_ms >= 62)
            dur = 16;
        else
            dur = 32;
        char noteStr[64];
        snprintf(noteStr, sizeof(noteStr), "%s,%d", note.c_str(), dur);
        strncat(rtttl, noteStr, sizeof(rtttl) - strlen(rtttl) - 1);
        audioThread->beginRttl(rtttl, strlen(rtttl));
        while (audioThread->isPlaying()) {
            delay(10);
        }
        return;
    }
 }
 #endif
 void playTones(const ToneDuration *tone_durations, int size)
 {
    if (config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_DISABLED ||
@@ -106,13 +57,7 @@ void playTones(const ToneDuration *tone_durations, int size)
        // Buzzer is disabled or not set to system tones
        return;
    }
-#ifdef HAS_I2S
+#ifdef PIN_BUZZER
    if (moduleConfig.external_notification.use_i2s_as_buzzer && audioThread) {
        playTonesRTTTL(tone_durations, size);
        return;
    }
 #endif
 #if defined(PIN_BUZZER)
    if (!config.device.buzzer_gpio)
        config.device.buzzer_gpio = PIN_BUZZER;
 #endif
@@ -1,29 +1,24 @@
 #pragma once
 #include <functional>
 #include <utility>
 #include "concurrency/OSThread.h"
 namespace concurrency
 {
 /**
- * @brief Periodically invoke a callback.
+ * @brief Periodically invoke a callback. This just provides C-style callback conventions
- *        Supports both legacy function pointers and modern callables.
+ *        rather than a virtual function - FIXME, remove?
 */
 class Periodic : public OSThread
 {
    int32_t (*callback)();
  public:
    // callback returns the period for the next callback invocation (or 0 if we should no longer be called)
-    Periodic(const char *name, int32_t (*cb)()) : OSThread(name), callback(cb) {}
+    Periodic(const char *name, int32_t (*_callback)()) : OSThread(name), callback(_callback) {}
    Periodic(const char *name, std::function<int32_t()> cb) : OSThread(name), callback(std::move(cb)) {}
  protected:
-    int32_t runOnce() override { return callback ? callback() : 0; }
+    int32_t runOnce() override { return callback(); }
  private:
    std::function<int32_t()> callback;
 };
 } // namespace concurrency
@@ -149,23 +149,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define TX_GAIN_LORA 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 9, 8, 7
 #endif
 #ifdef USE_KCT8103L_PA
 // Power Amps are often non-linear, so we can use an array of values for the power curve
 #if defined(HELTEC_WIRELESS_TRACKER_V2)
 #define NUM_PA_POINTS 22
 #define TX_GAIN_LORA 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 13, 13, 13, 12, 12, 11, 10, 9, 8, 7
 #elif defined(HELTEC_MESH_NODE_T096)
 #define NUM_PA_POINTS 22
 #define TX_GAIN_LORA 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 13, 13, 13, 12, 11, 10, 9, 8, 7
 #else
 // If a board enables USE_KCT8103L_PA but does not match a known variant and has
 // not already provided a PA curve, fail at compile time to avoid unsafe defaults.
 #if !defined(NUM_PA_POINTS) || !defined(TX_GAIN_LORA)
 #error "USE_KCT8103L_PA is defined, but no PA gain curve (NUM_PA_POINTS / TX_GAIN_LORA) is configured for this board."
 #endif
 #endif
 #endif
 #ifdef RAK13302
 #define NUM_PA_POINTS 22
 #define TX_GAIN_LORA 7, 8, 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 8
@@ -180,10 +163,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define TX_GAIN_LORA 0
 #endif
 #ifndef HAS_LORA_FEM
 #define HAS_LORA_FEM 0
 #endif
 // -----------------------------------------------------------------------------
 // Feature toggles
 // -----------------------------------------------------------------------------
@@ -282,8 +261,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BHI260AP_ADDR 0x28
 #define BMM150_ADDR 0x13
 #define DA217_ADDR 0x26
 #define BMI270_ADDR 0x68
 #define BMI270_ADDR_ALT 0x69
 // -----------------------------------------------------------------------------
 // LED
@@ -37,8 +37,8 @@ ScanI2C::FoundDevice ScanI2C::firstKeyboard() const
 ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const
 {
-    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3, BMX160, STK8BAXX, ICM20948, QMA6100P, BMM150, BMI270};
+    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3, BMX160, STK8BAXX, ICM20948, QMA6100P, BMM150};
-    return firstOfOrNONE(10, types);
+    return firstOfOrNONE(9, types);
 }
 ScanI2C::FoundDevice ScanI2C::firstAQI() const
@@ -89,12 +89,10 @@ class ScanI2C
        DA217,
        CHSC6X,
        CST226SE,
        BMI270,
        SEN5X,
        SFA30,
        CW2015,
-        SCD30,
+        SCD30
        ADS1115
    } DeviceType;
    // typedef uint8_t DeviceAddress;
@@ -341,9 +341,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                        type = DPS310;
                        break;
                    }
-                    if (type == DPS310) {
+                    break;
                        break;
                    }
                default:
                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1); // GET_ID
                    switch (registerValue) {
@@ -654,8 +652,9 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                }
                break;
-            case ICM20948_ADDR:     // same as BMX160_ADDR, BMI270_ADDR_ALT, and SEN5X_ADDR
+            case ICM20948_ADDR:     // same as BMX160_ADDR and SEN5X_ADDR
-            case ICM20948_ADDR_ALT: // same as MPU6050_ADDR, BMI270_ADDR
+            case ICM20948_ADDR_ALT: // same as MPU6050_ADDR
                // ICM20948 Register check
                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
 #ifdef HAS_ICM20948
                type = ICM20948;
@@ -666,14 +665,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                    type = ICM20948;
                    logFoundDevice("ICM20948", (uint8_t)addr.address);
                    break;
                } else if (registerValue == 0x24) {
                    type = BMI270;
                    logFoundDevice("BMI270", (uint8_t)addr.address);
                    break;
                } else if (registerValue == 0xD8) { // BMX160 chip ID at register 0x00
                    type = BMX160;
                    logFoundDevice("BMX160", (uint8_t)addr.address);
                    break;
                } else {
                    String prod = "";
                    prod = readSEN5xProductName(i2cBus, addr.address);
@@ -727,18 +718,11 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                if (len == 5 && memcmp(expectedInfo, info, len) == 0) {
                    LOG_INFO("NXP SE050 crypto chip found");
                    type = NXP_SE050;
                    break;
                }
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x01), 2);
+                } else {
-                if (registerValue == 0x8583 || registerValue == 0x8580) {
+                    LOG_INFO("FT6336U touchscreen found");
-                    type = ADS1115;
+                    type = FT6336U;
                    logFoundDevice("ADS1115 ADC", (uint8_t)addr.address);
                    break;
                }
                LOG_INFO("FT6336U touchscreen found");
                type = FT6336U;
                break;
            }
@@ -93,7 +93,7 @@ static const char *getGPSPowerStateString(GPSPowerState state)
 #ifdef PIN_GPS_SWITCH
 // If we have a hardware switch, define a periodic watcher outside of the GPS runOnce thread, since this can be sleeping
-// indefinitely
+// idefinitely
 int lastState = LOW;
 bool firstrun = true;
@@ -586,14 +586,14 @@ bool GPS::setup()
            _serial_gps->write("$PMTK301,2*2E\r\n");
            delay(250);
        } else if (gnssModel == GNSS_MODEL_ATGM336H) {
-            // Set the initial configuration of the device - these _should_ work for most AT6558 devices
+            // Set the intial configuration of the device - these _should_ work for most AT6558 devices
            msglen = makeCASPacket(0x06, 0x07, sizeof(_message_CAS_CFG_NAVX_CONF), _message_CAS_CFG_NAVX_CONF);
            _serial_gps->write(UBXscratch, msglen);
            if (getACKCas(0x06, 0x07, 250) != GNSS_RESPONSE_OK) {
                LOG_WARN("ATGM336H: Could not set Config");
            }
-            // Set the update frequency to 1Hz
+            // Set the update frequence to 1Hz
            msglen = makeCASPacket(0x06, 0x04, sizeof(_message_CAS_CFG_RATE_1HZ), _message_CAS_CFG_RATE_1HZ);
            _serial_gps->write(UBXscratch, msglen);
            if (getACKCas(0x06, 0x04, 250) != GNSS_RESPONSE_OK) {
@@ -700,7 +700,7 @@ bool GPS::setup()
                } else { // 8,9
                    LOG_INFO("GPS+SBAS+GLONASS+Galileo configured");
                }
-                // Documentation say, we need wait at least 0.5s after reconfiguration of GNSS module, before sending next
+                // Documentation say, we need wait atleast 0.5s after reconfiguration of GNSS module, before sending next
                // commands for the M8 it tends to be more... 1 sec should be enough ;>)
                delay(1000);
            }
@@ -733,7 +733,7 @@ bool GPS::setup()
                SEND_UBX_PACKET(0x06, 0x86, _message_PMS, "enable powersave for GPS", 500);
                SEND_UBX_PACKET(0x06, 0x3B, _message_CFG_PM2, "enable powersave details for GPS", 500);
-                // For M8 we want to enable NMEA version 4.10 so we can see the additional sats.
+                // For M8 we want to enable NMEA vserion 4.10 so we can see the additional sats.
                if (gnssModel == GNSS_MODEL_UBLOX8) {
                    clearBuffer();
                    SEND_UBX_PACKET(0x06, 0x17, _message_NMEA, "enable NMEA 4.10", 500);
@@ -1211,7 +1211,7 @@ int32_t GPS::runOnce()
        return disable(); // This should trigger when we have a fixed position, and get that first position
    // 9600bps is approx 1 byte per msec, so considering our buffer size we never need to wake more often than 200ms
-    // if not awake we can run super infrequently (once every 5 secs?) to see if we need to wake.
+    // if not awake we can run super infrquently (once every 5 secs?) to see if we need to wake.
    return (powerState == GPS_ACTIVE) ? GPS_THREAD_INTERVAL : 5000;
 }
@@ -12,7 +12,7 @@ GeoCoord::GeoCoord(int32_t lat, int32_t lon, int32_t alt) : _latitude(lat), _lon
 GeoCoord::GeoCoord(float lat, float lon, int32_t alt) : _altitude(alt)
 {
-    // Change decimal representation to int32_t. I.e., 12.345 becomes 123450000
+    // Change decimial representation to int32_t. I.e., 12.345 becomes 123450000
    _latitude = int32_t(lat * 1e+7);
    _longitude = int32_t(lon * 1e+7);
    GeoCoord::setCoords();
@@ -20,7 +20,7 @@ GeoCoord::GeoCoord(float lat, float lon, int32_t alt) : _altitude(alt)
 GeoCoord::GeoCoord(double lat, double lon, int32_t alt) : _altitude(alt)
 {
-    // Change decimal representation to int32_t. I.e., 12.345 becomes 123450000
+    // Change decimial representation to int32_t. I.e., 12.345 becomes 123450000
    _latitude = int32_t(lat * 1e+7);
    _longitude = int32_t(lon * 1e+7);
    GeoCoord::setCoords();
@@ -467,10 +467,10 @@ int32_t GeoCoord::bearingTo(const GeoCoord &pointB)
 }
 /**
- * Create a new point based on the passed-in point
+ * Create a new point bassed on the passed in poin
 * Ported from http://www.edwilliams.org/avform147.htm#LL
 * @param bearing
- * The bearing in radians
+ * The bearing in raidans
 * @param range_meters
 * range in meters
 * @return GeoCoord object of point at bearing and range from initial point
@@ -593,4 +593,4 @@ double GeoCoord::toRadians(double deg)
 double GeoCoord::toDegrees(double r)
 {
    return r * 180 / PI;
-}
+}
@@ -2,7 +2,6 @@
 #include "configuration.h"
 #include "detect/ScanI2C.h"
 #include "main.h"
 #include "modules/NodeInfoModule.h"
 #include <Throttle.h>
 #include <sys/time.h>
 #include <time.h>
@@ -13,14 +12,6 @@ uint32_t lastSetFromPhoneNtpOrGps = 0;
 static uint32_t lastTimeValidationWarning = 0;
 static const uint32_t TIME_VALIDATION_WARNING_INTERVAL_MS = 15000; // 15 seconds
 static void triggerNodeInfoCheckOnTimeSource(RTCQuality oldQuality, RTCQuality newQuality)
 {
    if (oldQuality == RTCQualityNone && newQuality > RTCQualityNone && nodeInfoModule) {
        LOG_DEBUG("Time source acquired (%s -> %s), triggering NodeInfo recheck", RtcName(oldQuality), RtcName(newQuality));
        nodeInfoModule->triggerImmediateNodeInfoCheck();
    }
 }
 RTCQuality getRTCQuality()
 {
    return currentQuality;
@@ -70,11 +61,9 @@ RTCSetResult readFromRTC()
        LOG_DEBUG("Read RTC time from RV3028 getTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                  t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
        if (currentQuality == RTCQualityNone) {
            RTCQuality oldQuality = currentQuality;
            timeStartMsec = now;
            zeroOffsetSecs = tv.tv_sec;
            currentQuality = RTCQualityDevice;
            triggerNodeInfoCheckOnTimeSource(oldQuality, currentQuality);
        }
        return RTCSetResultSuccess;
    } else {
@@ -116,11 +105,9 @@ RTCSetResult readFromRTC()
        LOG_DEBUG("Read RTC time from %s getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", rtc.getChipName(), t.tm_year + 1900,
                  t.tm_mon + 1, t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
        if (currentQuality == RTCQualityNone) {
            RTCQuality oldQuality = currentQuality;
            timeStartMsec = now;
            zeroOffsetSecs = tv.tv_sec;
            currentQuality = RTCQualityDevice;
            triggerNodeInfoCheckOnTimeSource(oldQuality, currentQuality);
        }
        return RTCSetResultSuccess;
    } else {
@@ -152,11 +139,9 @@ RTCSetResult readFromRTC()
            }
 #endif
            if (currentQuality == RTCQualityNone) {
                RTCQuality oldQuality = currentQuality;
                timeStartMsec = now;
                zeroOffsetSecs = tv.tv_sec;
                currentQuality = RTCQualityDevice;
                triggerNodeInfoCheckOnTimeSource(oldQuality, currentQuality);
            }
            return RTCSetResultSuccess;
        }
@@ -229,7 +214,6 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
    }
    if (shouldSet) {
        RTCQuality oldQuality = currentQuality;
        currentQuality = q;
        lastSetMsec = now;
        if (currentQuality >= RTCQualityNTP) {
@@ -239,7 +223,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
        // This delta value works on all platforms
        timeStartMsec = now;
        zeroOffsetSecs = tv->tv_sec;
-        // If this platform has a settable RTC, set it
+        // If this platform has a setable RTC, set it
 #ifdef RV3028_RTC
        if (rtc_found.address == RV3028_RTC) {
            Melopero_RV3028 rtc;
@@ -297,7 +281,6 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
 #endif
        readFromRTC();
        triggerNodeInfoCheckOnTimeSource(oldQuality, currentQuality);
        return RTCSetResultSuccess;
    } else {
        return RTCSetResultNotSet; // RTC was already set with a higher quality time
@@ -414,23 +397,12 @@ uint32_t getValidTime(RTCQuality minQuality, bool local)
    return (currentQuality >= minQuality) ? getTime(local) : 0;
 }
 #ifdef PIO_UNIT_TESTING
 void setBootRelativeTimeForUnitTest(uint32_t secondsSinceBoot)
 {
    currentQuality = RTCQualityNone;
    zeroOffsetSecs = 0;
    timeStartMsec = millis() - (secondsSinceBoot * 1000);
    lastSetFromPhoneNtpOrGps = 0;
    lastTimeValidationWarning = 0;
 }
 #endif
 time_t gm_mktime(const struct tm *tm)
 {
 #if !MESHTASTIC_EXCLUDE_TZ
    time_t result = 0;
-    // First, get us to the start of tm->year, by calculating the number of days since the Unix epoch.
+    // First, get us to the start of tm->year, by calcuating the number of days since the Unix epoch.
    int year = 1900 + tm->tm_year; // tm_year is years since 1900
    int year_minus_one = year - 1;
    int days_before_this_year = 0;
@@ -54,10 +54,6 @@ uint32_t getValidTime(RTCQuality minQuality, bool local = false);
 RTCSetResult readFromRTC();
 #ifdef PIO_UNIT_TESTING
 void setBootRelativeTimeForUnitTest(uint32_t secondsSinceBoot);
 #endif
 time_t gm_mktime(const struct tm *tm);
 #define SEC_PER_DAY 86400
@@ -37,7 +37,7 @@ static const uint8_t _message_CAS_CFG_RATE_1HZ[] = {
 // CFG-NAVX (0x06, 0x07)
 // Initial ATGM33H-5N configuration, Updates for Dynamic Mode, Fix Mode, and SV system
-// Quirk: The ATGM33H-5N-31 should only support GPS+BDS, however it will happily enable
+// Qwirk: The ATGM33H-5N-31 should only support GPS+BDS, however it will happily enable
 //  and use GPS+BDS+GLONASS iff the correct CFG_NAVX command is used.
 static const uint8_t _message_CAS_CFG_NAVX_CONF[] = {
    0x03, 0x01, 0x00, 0x00, // Update Mask: Dynamic Mode, Fix Mode, Nav Settings
@@ -57,7 +57,7 @@ static const uint8_t _message_CFG_PM2[] PROGMEM = {
    0x00, 0x00, 0x00, 0x00  // 0x64, 0x40, 0x01, 0x00  // reserved 11
 };
-// Constellation setup, none required for Neo-6
+// Constallation setup, none required for Neo-6
 // For Neo-7 GPS & SBAS
 static const uint8_t _message_GNSS_7[] = {
@@ -157,7 +157,7 @@ static const uint8_t _message_NAVX5[] = {
    0x00, 0x00, 0x00, 0x00, // Reserved 9
    0x00,                   // Reserved 10
    0x00,                   // Reserved 11
-    0x00,                   // usePPP (Precise Point Positioning) (0 = false, 1 = true)
+    0x00,                   // usePPP (Precice Point Positioning) (0 = false, 1 = true)
    0x01,                   // useAOP  (AssistNow Autonomous configuration) = 1 (enabled)
    0x00,                   // Reserved 12
    0x00,                   // Reserved 13
@@ -185,7 +185,7 @@ static const uint8_t _message_NAVX5_8[] = {
    0x00,                   // Reserved 4
    0x00, 0x00,             // Reserved 5
    0x00, 0x00,             // Reserved 6
-    0x00,                   // usePPP (Precise Point Positioning) (0 = false, 1 = true)
+    0x00,                   // usePPP (Precice Point Positioning) (0 = false, 1 = true)
    0x01,                   // aopCfg  (AssistNow Autonomous configuration) = 1 (enabled)
    0x00, 0x00,             // Reserved 7
    0x00, 0x00,             // aopOrbMaxErr = 0 to reset to firmware default
@@ -314,7 +314,7 @@ static const uint8_t _message_DISABLE_TXT_INFO[] = {
 // This command applies to M8 products
 static const uint8_t _message_PMS[] = {
    0x00,       // Version (0)
-    0x03,       // Power setup value 3 = Agressive 1Hz
+    0x03,       // Power setup value 3 = Agresssive 1Hz
    0x00, 0x00, // period: not applicable, set to 0
    0x00, 0x00, // onTime: not applicable, set to 0
    0x00, 0x00  // reserved, generated by u-center
@@ -337,7 +337,7 @@ static const uint8_t _message_SAVE_10[] = {
 // As the M10 has no flash, the best we can do to preserve the config is to set it in RAM and BBR.
 // BBR will survive a restart, and power off for a while, but modules with small backup
 // batteries or super caps will not retain the config for a long power off time.
-// for all configurations using sleep / low power modes, V_BCKP needs to be hooked to permanent power for fast acquisition after
+// for all configurations using sleep / low power modes, V_BCKP needs to be hooked to permanent power for fast aquisition after
 // sleep
 // VALSET Commands for M10
@@ -462,7 +462,7 @@ Default GNSS configuration is: GPS, Galileo, BDS B1l, with QZSS and SBAS enabled
 The PMREQ puts the receiver to sleep and wakeup re-acquires really fast and seems to not need
 the PM config. Lets try without it.
 PMREQ sort of works with SBAS, but the awake time is too short to re-acquire any SBAS sats.
-The definition of "Got Fix" doesn't seem to include SBAS. Much more too this...
+The defination of "Got Fix" doesn't seem to include SBAS. Much more too this...
 Even if it was, it can take minutes (up to 12.5),
 even under good sat visibility conditions to re-acquire the SBAS data.
@@ -1,6 +1,6 @@
 #include "configuration.h"
-#if defined(USE_EINK) && !defined(USE_EINK_PARALLELDISPLAY)
+#ifdef USE_EINK
 #include "EInkDisplay2.h"
 #include "SPILock.h"
 #include "main.h"
@@ -101,7 +101,7 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
    return true;
 }
-// End the update process - virtual method, overridden in derived class
+// End the update process - virtual method, overriden in derived class
 void EInkDisplay::endUpdate()
 {
    // Power off display hardware, then deep-sleep (Except Wireless Paper V1.1, no deep-sleep)
@@ -143,10 +143,6 @@ bool EInkDisplay::connect()
 #ifdef ELECROW_ThinkNode_M1
    // ThinkNode M1 has a hardware dimmable backlight. Start enabled
    digitalWrite(PIN_EINK_EN, HIGH);
 #elif defined(MINI_EPAPER_S3)
    // T-Mini Epaper S3 requires panel power rail enabled before SPI transfer.
    digitalWrite(PIN_EINK_EN, HIGH);
    delay(10);
 #else
    digitalWrite(PIN_EINK_EN, LOW);
 #endif
@@ -206,8 +202,7 @@ bool EInkDisplay::connect()
    }
 #elif defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER) ||                 \
-    defined(CROWPANEL_ESP32S3_5_EPAPER) || defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER) ||         \
+    defined(CROWPANEL_ESP32S3_5_EPAPER) || defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER)
    defined(MINI_EPAPER_S3)
    {
        // Start HSPI
        hspi = new SPIClass(HSPI);
@@ -221,13 +216,9 @@ bool EInkDisplay::connect()
        // Init GxEPD2
        adafruitDisplay->init();
 #if defined(MINI_EPAPER_S3)
        adafruitDisplay->setRotation(3);
 #else
        adafruitDisplay->setRotation(3);
 #if defined(CROWPANEL_ESP32S3_5_EPAPER) || defined(CROWPANEL_ESP32S3_4_EPAPER)
        adafruitDisplay->setRotation(0);
 #endif
 #endif
    }
 #elif defined(PCA10059) || defined(ME25LS01)
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
HarukiToreda	6457a7ab9e	Merge branch 'develop' into Freetext	2026-02-23 20:55:58 -05:00
HarukiToreda	c27ad2349b	Suppress Navigation bar for Freetext frames	2026-02-19 21:49:43 -05:00
HarukiToreda	e206f14f37	Emote Picker Refactoring	2026-02-19 18:26:52 -05:00
HarukiToreda	1e7228f667	Grid View Emotes	2026-02-19 17:35:58 -05:00
HarukiToreda	f6bf33d61d	Optimization	2026-02-19 17:09:28 -05:00
HarukiToreda	951b812693	Emote support on "e" press	2026-02-19 14:44:41 -05:00
HarukiToreda	2632122495	Rounded selections and hidden navigation bar	2026-02-19 13:48:51 -05:00
HarukiToreda	96e9041943	CannedMessageModule.cpp refactoring	2026-02-19 13:06:33 -05:00
HarukiToreda	2b03d012f2	Text Prediction	2026-02-19 02:51:52 -05:00