Thomas Göttgens ee48094ea8 Fix backwards GPS_RX_PIN/GPS_TX_PIN direction comments (#11585) ...

GPS.cpp passes GPS_RX_PIN as the MCU's RX pin and GPS_TX_PIN as its TX
pin. Nine variants documented the opposite, which reads as if the pins
were swapped on working hardware (see #11584).

Comment-only change; no pin assignment is touched.

2026-08-24 11:29:54 +02:00

..

bpi_picow_esp32_s3

Develop to master (#9618)

2026-02-19 07:16:33 -06:00

CDEBYTE_EoRa-Hub

ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)

2026-05-17 18:53:32 -05:00

CDEBYTE_EoRa-S3

Add explicit board_level = release (#11305)

2026-07-31 16:04:24 +00:00

crowpanel-esp32s3-5-epaper

ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)

2026-05-17 18:53:32 -05:00

diy

ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)

2026-05-17 18:53:32 -05:00

dreamcatcher

Update ESP8266Audio dependency to Meshtastic fork for compatibility (#9872)

2026-03-09 17:36:18 -05:00

EBYTE_ESP32-S3

Develop to master (#9618)

2026-02-19 07:16:33 -06:00

elecrow_panel

chore(deps): update lovyangfx to v1.2.27 (#11533)

2026-08-21 13:46:14 +00:00

ELECROW-ThinkNode-G3

chore(deps): update esp32-ch390 to v1.1.1 (#11398)

2026-08-12 06:34:44 +00:00

ELECROW-ThinkNode-M2

Add explicit board_level = release (#11305)

2026-07-31 16:04:24 +00:00

ELECROW-ThinkNode-M5

Fix backwards GPS_RX_PIN/GPS_TX_PIN direction comments (#11585)

2026-08-24 11:29:54 +02:00

ELECROW-ThinkNode-M7

refactor(led): generalize LED_LORA init from ThinkNode-M7 (#11437)

2026-08-13 08:31:39 +02:00

ELECROW-ThinkNode-M9

Fill in device registry metadata for recently added hardware (#11567)

2026-08-22 14:34:49 +00:00

esp32-s3-pico

ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)

2026-05-17 18:53:32 -05:00

hackaday-communicator

Add Heltec RC32, RC52 and RCC6 boards, and LC760CA GNSS support (#11572)

2026-08-23 11:00:37 +00:00

heltec_capsule_sensor_v3

Remove board_check (now using normal matrix) (#11312)

2026-08-01 21:41:55 -04:00

heltec_rc32

Add Heltec RC32, RC52 and RCC6 boards, and LC760CA GNSS support (#11572)

2026-08-23 11:00:37 +00:00

heltec_sensor_hub

Remove board_check (now using normal matrix) (#11312)

2026-08-01 21:41:55 -04:00

heltec_v3

Remove board_check (now using normal matrix) (#11312)

2026-08-01 21:41:55 -04:00

heltec_v4

Fix backwards GPS_RX_PIN/GPS_TX_PIN direction comments (#11585)

2026-08-24 11:29:54 +02:00

heltec_v4_r8

Fix backwards GPS_RX_PIN/GPS_TX_PIN direction comments (#11585)

2026-08-24 11:29:54 +02:00

heltec_vision_master_e213

Add explicit board_level = release (#11305)

2026-07-31 16:04:24 +00:00

heltec_vision_master_e290

Add explicit board_level = release (#11305)

2026-07-31 16:04:24 +00:00

heltec_vision_master_t190

Add explicit board_level = release (#11305)

2026-07-31 16:04:24 +00:00

heltec_wireless_paper

Add explicit board_level = release (#11305)

2026-07-31 16:04:24 +00:00

heltec_wireless_paper_v1

ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)

2026-05-17 18:53:32 -05:00

heltec_wireless_tracker

chore(deps): update lovyangfx to v1.2.27 (#11533)

2026-08-21 13:46:14 +00:00

heltec_wireless_tracker_v2

Fill in device registry metadata for recently added hardware (#11567)

2026-08-22 14:34:49 +00:00

heltec_wireless_tracker_V1_0

chore(deps): update lovyangfx to v1.2.27 (#11533)

2026-08-21 13:46:14 +00:00

heltec_wsl_v3

Add explicit board_level = release (#11305)

2026-07-31 16:04:24 +00:00

icarus

Remove board_check (now using normal matrix) (#11312)

2026-08-01 21:41:55 -04:00

link32_s3_v1

Add RADIOLIB_EXCLUDE_LR2021 in places that excluded LR11x0 (#10112)

2026-04-14 16:55:11 +02:00

m5stack_cardputer_adv

Remove board_check (now using normal matrix) (#11312)

2026-08-01 21:41:55 -04:00

m5stack_cores3

Remove board_check (now using normal matrix) (#11312)

2026-08-01 21:41:55 -04:00

mesh-tab

chore(deps): update lovyangfx to v1.2.27 (#11533)

2026-08-21 13:46:14 +00:00

meshnology-w10

meshnology-w10: define HAS_SPI_TFT so the TFT screen initializes again (#11042)

2026-08-22 19:06:33 -05:00

meshnology-w12

Fill in device registry metadata for recently added hardware (#11567)

2026-08-22 14:34:49 +00:00

mini-epaper-s3

Remove board_check (now using normal matrix) (#11312)

2026-08-01 21:41:55 -04:00

nibble_esp32

Develop to master (#9618)

2026-02-19 07:16:33 -06:00

nugget_s3_lora

Develop to master (#9618)

2026-02-19 07:16:33 -06:00

picomputer-s3

chore(deps): update lovyangfx to v1.2.27 (#11533)

2026-08-21 13:46:14 +00:00

rak3312

Remove board_check (now using normal matrix) (#11312)

2026-08-01 21:41:55 -04:00

rak_wismesh_tap_v2

chore(deps): update lovyangfx to v1.2.27 (#11533)

2026-08-21 13:46:14 +00:00

seeed_xiao_s3

Remove board_check (now using normal matrix) (#11312)

2026-08-01 21:41:55 -04:00

seeed-sensecap-indicator

use PSRAM for MBED TLS (#11350)

2026-08-04 00:35:40 +00:00

station-common

emdashes begone (#10847)

2026-07-01 19:01:27 -05:00

station-g2

Remove board_check (now using normal matrix) (#11312)

2026-08-01 21:41:55 -04:00

station-g3

Remove board_check (now using normal matrix) (#11312)

2026-08-01 21:41:55 -04:00

t5s3_epaper

Remove board_check (now using normal matrix) (#11312)

2026-08-01 21:41:55 -04:00

t-beam-1w

Fill in device registry metadata for recently added hardware (#11567)

2026-08-22 14:34:49 +00:00

t-beam-bpf

Fill in device registry metadata for recently added hardware (#11567)

2026-08-22 14:34:49 +00:00

t-deck

chore(deps): update lovyangfx to v1.2.27 (#11533)

2026-08-21 13:46:14 +00:00

t-deck-pro

fix t-deck-pro: disable BHI260AP support until SensorLib replacement is available

2026-08-21 12:42:16 -04:00

t-deck-pro-v1_1

fix t-deck-pro-v1.1: disable BHI260AP support until SensorLib replacement is available (#11562)

2026-08-21 11:25:39 -05:00

t-eth-elite

Remove board_check (now using normal matrix) (#11312)

2026-08-01 21:41:55 -04:00

t-watch-s3

chore(deps): update lovyangfx to v1.2.27 (#11533)

2026-08-21 13:46:14 +00:00

t-watch-ultra

chore(deps): Correct library dependencies for T-Deck Pro and T-Watch Ultra (#11561)

2026-08-21 10:59:26 -05:00

tbeam-s3-core

Remove board_check (now using normal matrix) (#11312)

2026-08-01 21:41:55 -04:00

tlora_t3s3_epaper

Remove board_check (now using normal matrix) (#11312)

2026-08-01 21:41:55 -04:00

tlora_t3s3_v1

Remove board_check (now using normal matrix) (#11312)

2026-08-01 21:41:55 -04:00

tlora-pager

chore(deps): update lovyangfx to v1.2.27 (#11533)

2026-08-21 13:46:14 +00:00

tracksenger

chore(deps): update lovyangfx to v1.2.27 (#11533)

2026-08-21 13:46:14 +00:00

unphone

chore(deps): update lovyangfx to v1.2.27 (#11533)

2026-08-21 13:46:14 +00:00

visualizer-hub75

Remove board_check (now using normal matrix) (#11312)

2026-08-01 21:41:55 -04:00

esp32s3.ini

ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)

2026-05-17 18:53:32 -05:00