mirror of
https://github.com/alexhopeoconnor/firmware.git
synced 2026-10-04 03:18:10 +10:00
Ben Meadors
f6f116a39d
Audit of the custom_meshtastic_* manifest on the variants backing the newest boards, against the protobuf HardwareModel enum, the compiled HW_VENDOR, the board flash size and the artwork actually published by the web flasher. No support flag changes here - actively_supported is left exactly as each variant already had it. ThinkNode M9 had no HW_VENDOR arm, so every M9 has been reporting PRIVATE_HW while its manifest advertised 131; add the mapping and rename the slug to the enum name (THINKNODE_M9) it is meant to mirror. Seeed SenseCAP Mesh-Tracker X1 moves from the PR matrix to release, and its images entry now points at seeed_mesh_tracker_x1.svg, which is what the flasher actually ships - the hyphenated name resolved to nothing. T-Beam BPF, T-Beam 1W and Heltec Wireless Tracker V2 declared the architecture as "esp32s3"; the value is copied verbatim into the manifest, and the flash flow matches on the normalized "esp32-s3". T-Beam BPF and M5Stack Unit C6L both build default_16MB.csv on 16 MB flash but declared no partition scheme, which leaves the flasher on the 4 MB fallback offsets for a legacy clean install. Meshnology W10 and W12 gain the artwork and vendor tag that already exist for them.
34 lines
1.2 KiB
INI
34 lines
1.2 KiB
INI
[env:seeed_mesh_tracker_X1]
|
|
custom_meshtastic_support_level = 1
|
|
custom_meshtastic_images = seeed_mesh_tracker_x1.svg
|
|
custom_meshtastic_tags = Seeed
|
|
custom_meshtastic_hw_model = 128
|
|
custom_meshtastic_hw_model_slug = MESH_TRACKER_X1
|
|
custom_meshtastic_architecture = nrf52840
|
|
custom_meshtastic_display_name = Seeed SenseCAP Mesh-Tracker-X1
|
|
custom_meshtastic_actively_supported = true
|
|
|
|
extends = nrf52840_base
|
|
board = mesh-tracker-x1
|
|
board_level = release
|
|
build_flags = ${nrf52840_base.build_flags}
|
|
-Ivariants/nrf52840/seeed_mesh_tracker_X1
|
|
-Isrc/platform/nrf52/softdevice
|
|
-Isrc/platform/nrf52/softdevice/nrf52
|
|
-DMESH_TRACKER_X1
|
|
-DCONFIG_NFCT_PINS_AS_GPIOS=1
|
|
-DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR_EXTERNAL=1
|
|
-DMESHTASTIC_EXCLUDE_CANNEDMESSAGES=1
|
|
-DMESHTASTIC_EXCLUDE_SCREEN=1
|
|
-DMESHTASTIC_EXCLUDE_DETECTIONSENSOR=1
|
|
-DMESHTASTIC_EXCLUDE_WIFI=1
|
|
board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
|
|
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/seeed_mesh_tracker_X1>
|
|
lib_deps =
|
|
${nrf52840_base.lib_deps}
|
|
adafruit/Adafruit DRV2605 Library@1.2.4
|
|
|
|
debug_tool = jlink
|
|
; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
|
|
upload_protocol = nrfutil
|