firmware/src/mesh/generated/meshtastic/serial_hal.pb.h

/* Automatically generated nanopb header */
/* Generated by nanopb-0.4.9.1 */

#ifndef PB_MESHTASTIC_MESHTASTIC_SERIAL_HAL_PB_H_INCLUDED
#define PB_MESHTASTIC_MESHTASTIC_SERIAL_HAL_PB_H_INCLUDED
#include <pb.h>

#if PB_PROTO_HEADER_VERSION != 40
#error Regenerate this file with the current version of nanopb generator.
#endif

/* Enum definitions */
typedef enum _meshtastic_SerialHalCommand_Type {
    meshtastic_SerialHalCommand_Type_UNSET = 0,
    meshtastic_SerialHalCommand_Type_PIN_MODE = 1,
    meshtastic_SerialHalCommand_Type_DIGITAL_WRITE = 2,
    meshtastic_SerialHalCommand_Type_DIGITAL_READ = 3,
    meshtastic_SerialHalCommand_Type_ATTACH_INTERRUPT = 4,
    meshtastic_SerialHalCommand_Type_DETACH_INTERRUPT = 5,
    meshtastic_SerialHalCommand_Type_SPI_TRANSFER = 6,
    meshtastic_SerialHalCommand_Type_NOOP = 7
} meshtastic_SerialHalCommand_Type;

typedef enum _meshtastic_SerialHalResponse_Result {
    meshtastic_SerialHalResponse_Result_OK = 0,
    meshtastic_SerialHalResponse_Result_ERROR = 1,
    meshtastic_SerialHalResponse_Result_BAD_REQUEST = 2,
    meshtastic_SerialHalResponse_Result_UNSUPPORTED = 3
} meshtastic_SerialHalResponse_Result;

/* Struct definitions */
typedef PB_BYTES_ARRAY_T(512) meshtastic_SerialHalCommand_data_t;
typedef struct _meshtastic_SerialHalCommand {
    /* Host-assigned request id. Replies echo this id back in
 SerialHalResponse.transaction_id. */
    uint32_t transaction_id;
    meshtastic_SerialHalCommand_Type type;
    uint32_t pin;
    uint32_t value;
    uint32_t mode;
    meshtastic_SerialHalCommand_data_t data;
} meshtastic_SerialHalCommand;

typedef PB_BYTES_ARRAY_T(512) meshtastic_SerialHalResponse_data_t;
typedef struct _meshtastic_SerialHalResponse {
    /* Matches the originating SerialHalCommand.transaction_id for normal
 request/response traffic.

 A value of 0 indicates an unsolicited interrupt notification generated by
 the device. In that case, the host should interpret value as the GPIO pin
 that triggered. */
    uint32_t transaction_id;
    meshtastic_SerialHalResponse_Result result;
    /* Used by DIGITAL_READ replies and interrupt notifications. For interrupt
 notifications (transaction_id == 0), this carries the pin number. */
    uint32_t value;
    meshtastic_SerialHalResponse_data_t data;
    char error[80];
} meshtastic_SerialHalResponse;


#ifdef __cplusplus
extern "C" {
#endif

/* Helper constants for enums */
#define _meshtastic_SerialHalCommand_Type_MIN meshtastic_SerialHalCommand_Type_UNSET
#define _meshtastic_SerialHalCommand_Type_MAX meshtastic_SerialHalCommand_Type_NOOP
#define _meshtastic_SerialHalCommand_Type_ARRAYSIZE ((meshtastic_SerialHalCommand_Type)(meshtastic_SerialHalCommand_Type_NOOP+1))

#define _meshtastic_SerialHalResponse_Result_MIN meshtastic_SerialHalResponse_Result_OK
#define _meshtastic_SerialHalResponse_Result_MAX meshtastic_SerialHalResponse_Result_UNSUPPORTED
#define _meshtastic_SerialHalResponse_Result_ARRAYSIZE ((meshtastic_SerialHalResponse_Result)(meshtastic_SerialHalResponse_Result_UNSUPPORTED+1))

#define meshtastic_SerialHalCommand_type_ENUMTYPE meshtastic_SerialHalCommand_Type

#define meshtastic_SerialHalResponse_result_ENUMTYPE meshtastic_SerialHalResponse_Result


/* Initializer values for message structs */
#define meshtastic_SerialHalCommand_init_default {0, _meshtastic_SerialHalCommand_Type_MIN, 0, 0, 0, {0, {0}}}
#define meshtastic_SerialHalResponse_init_default {0, _meshtastic_SerialHalResponse_Result_MIN, 0, {0, {0}}, ""}
#define meshtastic_SerialHalCommand_init_zero    {0, _meshtastic_SerialHalCommand_Type_MIN, 0, 0, 0, {0, {0}}}
#define meshtastic_SerialHalResponse_init_zero   {0, _meshtastic_SerialHalResponse_Result_MIN, 0, {0, {0}}, ""}

/* Field tags (for use in manual encoding/decoding) */
#define meshtastic_SerialHalCommand_transaction_id_tag 1
#define meshtastic_SerialHalCommand_type_tag     2
#define meshtastic_SerialHalCommand_pin_tag      3
#define meshtastic_SerialHalCommand_value_tag    4
#define meshtastic_SerialHalCommand_mode_tag     5
#define meshtastic_SerialHalCommand_data_tag     6
#define meshtastic_SerialHalResponse_transaction_id_tag 1
#define meshtastic_SerialHalResponse_result_tag  2
#define meshtastic_SerialHalResponse_value_tag   3
#define meshtastic_SerialHalResponse_data_tag    4
#define meshtastic_SerialHalResponse_error_tag   5

/* Struct field encoding specification for nanopb */
#define meshtastic_SerialHalCommand_FIELDLIST(X, a) \
X(a, STATIC,   SINGULAR, UINT32,   transaction_id,    1) \
X(a, STATIC,   SINGULAR, UENUM,    type,              2) \
X(a, STATIC,   SINGULAR, UINT32,   pin,               3) \
X(a, STATIC,   SINGULAR, UINT32,   value,             4) \
X(a, STATIC,   SINGULAR, UINT32,   mode,              5) \
X(a, STATIC,   SINGULAR, BYTES,    data,              6)
#define meshtastic_SerialHalCommand_CALLBACK NULL
#define meshtastic_SerialHalCommand_DEFAULT NULL

#define meshtastic_SerialHalResponse_FIELDLIST(X, a) \
X(a, STATIC,   SINGULAR, UINT32,   transaction_id,    1) \
X(a, STATIC,   SINGULAR, UENUM,    result,            2) \
X(a, STATIC,   SINGULAR, UINT32,   value,             3) \
X(a, STATIC,   SINGULAR, BYTES,    data,              4) \
X(a, STATIC,   SINGULAR, STRING,   error,             5)
#define meshtastic_SerialHalResponse_CALLBACK NULL
#define meshtastic_SerialHalResponse_DEFAULT NULL

extern const pb_msgdesc_t meshtastic_SerialHalCommand_msg;
extern const pb_msgdesc_t meshtastic_SerialHalResponse_msg;

/* Defines for backwards compatibility with code written before nanopb-0.4.0 */
#define meshtastic_SerialHalCommand_fields &meshtastic_SerialHalCommand_msg
#define meshtastic_SerialHalResponse_fields &meshtastic_SerialHalResponse_msg

/* Maximum encoded size of messages (where known) */
#define MESHTASTIC_MESHTASTIC_SERIAL_HAL_PB_H_MAX_SIZE meshtastic_SerialHalResponse_size
#define meshtastic_SerialHalCommand_size         541
#define meshtastic_SerialHalResponse_size        610

#ifdef __cplusplus
} /* extern "C" */
#endif

#endif