Files
firmware/src/detect/ScanI2C.h
T
7cbab4838c Feat/add sen5x (#7245)
* Move PMSA003I to separate class and update AQ telemetry

* AirQualityTelemetry module not depend on PM sensor presence

* Remove commented line

* Fixes on PMS class

* Add missing warmup period to wakeUp function

* Fixes on compilation for different variants

* Add functions to check for I2C bus speed and set it

* Add ScreenFonts.h

Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de>

* PMSA003I 1st round test

* Fix I2C scan speed

* Fix minor issues and bring back I2C SPEED def

* Remove PMSA003I library as its no longer needed

* Remove unused I2C speed functions and cleanup

* Cleanup of SEN5X specific code added from switching branches
* Remove SCAN_I2C_CLOCK_SPEED block as its not needed
* Remove associated functions for setting I2C speed

* Unify build epoch to add flag in platformio-custom.py (#7917)

* Unify build_epoch replacement logic in platformio-custom

* Missed one

* Fix build error in rak_wismesh_tap_v2 (#7905)

In the logs was:
"No screen resolution defined in build_flags. Please define DISPLAY_SIZE."

set according to similar devices.

* Put guards in place around debug heap operations (#7955)

* Put guards in place around debug heap operations

* Add macros to clean up code

* Add pointer as well

* Cleanup

* Fix memory leak in NextHopRouter: always free packet copy when removing from pending

* Formatting

* Only queue 2 client notification

* Merge pull request #7965 from compumike/compumike/fix-nrf52-bluetooth-memory-leak

Fix memory leak in `NRF52Bluetooth`: allocate `BluetoothStatus` on stack, not heap

* Merge pull request #7964 from compumike/compumike/fix-nimble-bluetooth-memory-leak

Fix memory leak in `NimbleBluetooth`: allocate `BluetoothStatus` on stack, not heap

* Update protobufs (#7973)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* T-Lora Pager: Support LR1121 and SX1280 models (#7956)

* T-Lora Pager: Support LR1121 and SX1280 models

* Remove ifdefs

* Trunk

* Trunk

* Static memory pool allocation (#7966)

* Static memory pool

* Initializer

* T-Lora Pager: Support LR1121 and SX1280 models (#7956)

* T-Lora Pager: Support LR1121 and SX1280 models

* Remove ifdefs

---------

Co-authored-by: WillyJL <me@willyjl.dev>

* Portduino dynamic alloc

* Missed

* Drop the limit

* Update meshtastic-esp8266-oled-ssd1306 digest to 0cbc26b (#7977)

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

* Fix json report crashes on esp32 (#7978)

* Tweak maximums

* Fix DRAM overflow on old esp32 targets

* Guard bad time warning logs using GPS_DEBUG (#7897)

In 2.7.7 / 2.7.8 we introduced some new checks for time accuracy.

In combination, these result in a spamming of the logs when a bad time is found

When the GPS is active, we're calling the GPS thread every 0.2secs.

So this log could be printed 4,500 times in a no-lock scenario :)

Reserve this experience for developers using GPS_DEBUG.

Fixes https://github.com/meshtastic/firmware/issues/7896

* Scale probe buffer size based on current baud rate (#7975)

* Scale probe buffer size based on current baud rate

* Throttle bad time validation logging and fix time comparison logic

* Remove comment

* Missed the other instances

* Copy pasta

* Fix GPS gm_mktime memory leak (#7981)

* Fix overflow of time value (#7984)

* Fix overflow of time value

* Revert "Fix overflow of time value"

This reverts commit 084796920179e80a7500d36c25fd4d82b3ef4214.

* That got boogered up

* Remove PMSA003 include from modules

* Add flag to exclude air quality module

* Rework PMSA003I to align with new I2C scanner

* Reworks AQ telemetry to match new dynamic allocation method
* Adds VBLE_I2C_CLOCK_SPEED build flag for sensors with different I2C speed requirements
* Reworks PMSA003I

* Move add sensor template to separate file

* Split telemetry on screen options

* Add variable I2C clock compile flag

* Added to Seeed Xiao S3 as demo

* Fix drawFrame in AQ module

* Module settings override to i2cScan module function

* Move to CAN_RECLOCK_I2C per architecture

* Add reclock function in TelemetrySensor.cpp
* Add flag in ESP32 common

* Minor fix

* Move I2C reclock function to src/detect

* Fix uninitMemberVar errors and compile issue

* Make sleep, wakeUp functions generic

* Fix STM32 builds

* Add exclude AQ sensor to builds that have environmental sensor excludes
* Add includes to AddI2CSensorTemplate.h

* SEN5X first pass

* WIP Sen5X functions

* Further (non-working) progress in SEN5X

* WIP Sen5X functions

* Changes on SEN5X library - removing pm_env as well

* Small cleanup of SEN5X sensors

* Minor change for SEN5X detection

* Remove dup code

* Enable PM sensor before sending telemetry.

This enables the PM sensor for a predefined period to allow for warmup.

Once telemetry is sent, the sensor shuts down again.

* Small cleanups in SEN5X sensor

* Add dynamic measurement interval for SEN5X

* Only disable SEN5X if enough time after reading.

* Idle for SEN5X on communication error

* Cleanup of logs and remove unnecessary delays

* Small TODO

* Settle on uint16_t for SEN5X PM data

* Make AQTelemetry sensors non-exclusive

* Implementation of cleaning in FS prefs and cleanup

* Remove unnecessary LOGS
* Add cleaning date storage in FS
* Report non-cumulative PN

* Bring back detection code for SEN5X after branch rebase

* Add placeholder for admin message

* Add VOC measurements and persistence (WIP)

* Adds VOC measurements and state
* Still not working on VOC Index persistence
* Should it stay in continuous mode?

* Add one-shot mode config flag to SEN5X

* Add nan checks on sensor data from SEN5X

* Working implementation on VOCState

* Adds initial timer for SEN55 to not sleep if VOCstate is not stable (1h)
* Adds conditions for stability and sensor state

* Fixes on VOC state and mode swtiching

* Adds a new RHT/Gas only mode, with 3600s stabilization time
* Fixes the VOCState buffer mismatch
* Fixes SEN50/54/55 model mistake

* Adapt SEN5X to new sensor list structure. Improve reclock.

* Improve reClockI2C conditions for different variants
* Add sleep, wakeUp, pendingForReady, hasSleep functions to PM sensors to save battery
* Add SEN5X

* Fix merge errors

* Update library dependencies in platformio.ini

* Fix unitialized variables in SEN5X constructor

* Fix missing import

* Cleanup of SEN5X class

* Exclude AQ sensor from wio-e5 due to flash limitations

* Fix I2C clock change logic

* Fix trunk

* Fix on condition in reclock

* Add check on polling interval of sen5x

---------

Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de>
Co-authored-by: Nashui-Yan <yannashui10@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Mike Robbins <mrobbins@alum.mit.edu>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
Co-authored-by: WillyJL <me@willyjl.dev>
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
2026-02-08 07:08:09 -06:00

161 lines
3.2 KiB
C++

#pragma once
#include <stddef.h>
#include <stdint.h>
class ScanI2C
{
public:
typedef enum DeviceType {
NONE,
SCREEN_SSD1306,
SCREEN_SH1106,
SCREEN_UNKNOWN, // has the same address as the two above but does not respond to the same commands
SCREEN_ST7567,
RTC_RV3028,
RTC_PCF8563,
RTC_PCF85063,
RTC_RX8130CE,
CARDKB,
TDECKKB,
BBQ10KB,
RAK14004,
PMU_AXP192_AXP2101, // has the same adress as the TCA8418KB
BME_680,
BME_280,
BMP_280,
BMP_085,
BMP_3XX,
INA260,
INA219,
INA3221,
MAX17048,
MCP9808,
SHT31,
SHT4X,
SHTC3,
LPS22HB,
QMC6310U,
QMC6310N,
QMI8658,
QMC5883L,
HMC5883L,
PMSA003I,
QMA6100P,
MPU6050,
LIS3DH,
BMA423,
BQ24295,
LSM6DS3,
TCA9535,
TCA9555,
VEML7700,
RCWL9620,
NCP5623,
LP5562,
TSL2591,
OPT3001,
MLX90632,
MLX90614,
AHT10,
BMX160,
DFROBOT_LARK,
NAU7802,
FT6336U,
STK8BAXX,
ICM20948,
SCD4X,
MAX30102,
TPS65233,
MPR121KB,
CGRADSENS,
INA226,
NXP_SE050,
DFROBOT_RAIN,
DPS310,
LTR390UV,
RAK12035,
TCA8418KB,
PCT2075,
CST328,
BQ25896,
BQ27220,
LTR553ALS,
BHI260AP,
BMM150,
TSL2561,
DRV2605,
BH1750,
DA217,
CHSC6X,
CST226SE,
SEN5X
} DeviceType;
// typedef uint8_t DeviceAddress;
typedef enum I2CPort {
NO_I2C,
WIRE,
WIRE1,
} I2CPort;
typedef struct DeviceAddress {
// set default values for ADDRESS_NONE
I2CPort port = I2CPort::NO_I2C;
uint8_t address = 0;
explicit DeviceAddress(I2CPort port, uint8_t address);
DeviceAddress();
bool operator<(const DeviceAddress &other) const;
} DeviceAddress;
static const DeviceAddress ADDRESS_NONE;
typedef uint8_t RegisterAddress;
typedef struct FoundDevice {
DeviceType type;
DeviceAddress address;
explicit FoundDevice(DeviceType = DeviceType::NONE, DeviceAddress = ADDRESS_NONE);
} FoundDevice;
static const FoundDevice DEVICE_NONE;
public:
ScanI2C();
virtual void scanPort(ScanI2C::I2CPort);
virtual void scanPort(ScanI2C::I2CPort, uint8_t *, uint8_t);
/*
* A bit of a hack, this tells the scanner not to tell later systems there is a screen to avoid enabling it.
*/
void setSuppressScreen();
FoundDevice firstScreen() const;
FoundDevice firstRTC() const;
FoundDevice firstKeyboard() const;
FoundDevice firstAccelerometer() const;
FoundDevice firstAQI() const;
FoundDevice firstRGBLED() const;
virtual FoundDevice find(DeviceType) const;
virtual bool exists(DeviceType) const;
virtual size_t countDevices() const;
protected:
virtual FoundDevice firstOfOrNONE(size_t, DeviceType[]) const;
private:
bool shouldSuppressScreen = false;
};