Files
firmware/src
GUVWAFandBen Meadors 83a201fe86 Use LORA_DIO1 as RadioLib GPIO for SX127x chips (#2290)
* When channel is active, first try receiving that packet
Afterwards we'll try transmitting again

* Remove setStandby in startSend
Already done in isChannelActive()

* Set LORA_DIO1 as RadioLib GPIO for SX127x

* LORA_DIO1 for Heltec v1, overlaps with GPS_TX
Set to RADIOLIB_NC for now

* If receive was not successful, startReceive doesn't trigger the interrupt
So we have to go back to transmitting anyway

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2023-02-22 10:07:03 +01:00
..
2023-01-21 21:23:24 +01:00
2023-01-28 06:39:14 -06:00
2023-02-05 09:06:57 +01:00
2023-02-03 08:50:10 -06:00
2023-02-22 10:07:03 +01:00
2023-01-21 21:23:24 +01:00
2023-01-21 21:23:24 +01:00
2023-01-21 21:23:24 +01:00
2023-01-18 21:13:31 -06:00
2023-01-21 21:23:24 +01:00
2023-02-05 00:11:00 +01:00
2023-01-21 21:23:24 +01:00
2023-01-21 21:23:24 +01:00
2023-01-21 21:23:24 +01:00
2023-01-21 21:23:24 +01:00
2023-01-21 21:23:24 +01:00
2023-01-21 21:23:24 +01:00
2023-01-21 21:23:24 +01:00
2023-01-21 21:23:24 +01:00
2023-02-04 17:15:36 +01:00
2023-01-21 21:23:24 +01:00
2023-01-21 21:23:24 +01:00
2022-12-29 20:41:37 -06:00
2023-01-21 21:23:24 +01:00
2023-01-21 21:23:24 +01:00
2023-01-21 21:23:24 +01:00
2023-01-31 18:36:20 +01:00
2023-01-21 21:23:24 +01:00
2023-01-21 21:23:24 +01:00
2020-09-06 09:24:08 -07:00
2023-01-21 21:23:24 +01:00
2023-01-23 12:29:10 +01:00