ElixirForge/firmware
1
0
Fork 0
mirror of https://github.com/alexhopeoconnor/firmware.git synced 2026-10-04 03:18:10 +10:00
Code Releases Activity
Files
9e60b23334dfdd12d8c5ba89344ef05cabbab1bf
firmware/platformio.ini
T
oscgonferandThomas Göttgens 8c0ef44b0b Add one wire i2c bridge support (#10078) 
* First version of DS248X bridge

* Add first iteration of DS248X sensor

* Supports single readings on DS2484
* Supports readings on ch0 for DS2484_800
* Detection of variant for DS248X

* Minor fix on retries for sensor init

* Allow multiple channel detect passes on 8-ch version

* Always read temperature via ROM matching

* Small comment to show how to send all channels

* Minor logging changes

* Prevent one-wire double definitions

* Detect ROMs per round

* Fix comment

* Prevent skipping on DS2482 ALT3 check

* Fix comment (again)

* Fix style  checks

* Remove comment for multiple measurements

* Address CodeRabbit review findings on DS248X sensor

Set _variant on every detectVariant path and branch on the member, so a
failed variant probe retries instead of falling into single-channel init.

Search DS2482-800 channels into a scratch buffer so a transient one-wire
failure cannot erase a ROM found on an earlier pass, and count channels
that already hold a ROM.

Check every one-wire return value in readTemperatureROM, validate the
scratchpad CRC, and return DS248X_INVALID_TEMPERATURE on failure so the
existing sentinel checks reject failed reads instead of reporting stale
or uninitialised data.

* Probe IIS2MDCTR WHO_AM_I before the DS248X status check

At HMC5883L_ADDR the DS248X probe reads 0xF0. On the IIS2MDCTR that
sub-address sets auto-increment and targets 0x70, which is reserved and
returns an unspecified value; any of bits 0x02, 0x04 or 0x10 makes the
probe claim the magnetometer as a DS2482.

Reading the WHO_AM_I at 0x4F first is deterministic for both parts. A
DS2482 does not acknowledge 0x4F, an invalid command code, and leaves
its read pointer untouched, so the subsequent read returns Status,
Configuration, Channel Selection or Read Data. None of those can hold
0x40 at scan time, so the DS248X probe still runs and detects it.

This also restores develop's detection order and matches the structure
already used at BMA423_ADDR: specific ID match, then probe, then the
generic fallback.

* Read only the reported channel in getMetrics

getMetrics walked all eight DS2482-800 channels, but only channel 0 is
ever written into the measurement. Each populated channel costs a
blocking 750ms conversion inside readTemperatureROM, so a fully wired
bridge stalled telemetry for roughly 6s per cycle and discarded seven of
the eight readings.

Channels without a sensor were already cheap thanks to the isValidROM
guard, so this only affects boards that actually use more than one
channel, which is the reason to fit a DS2482-800 in the first place.

Multi-channel reporting is handled separately in #10192; a note records
that it should start the conversion on every channel before waiting,
rather than reading each channel end to end.

* Trim DS248X comments to one line each

---------

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
2026-08-03 13:52:02 +00:00

254 lines
15 KiB
INI
Raw Blame History

; PlatformIO Project Configuration File
; https://docs.platformio.org/page/projectconf.html
[platformio]
default_envs = heltec-v3
extra_configs =
variants/*/*.ini
variants/*/*/platformio.ini
variants/*/diy/*/platformio.ini
src/graphics/niche/InkHUD/PlatformioConfig.ini
description = Meshtastic
[env]
test_build_src = true
extra_scripts =
pre:bin/platformio-pre.py
bin/platformio-custom.py
post:extra_scripts/nrf54l15_linker.py
; note: we add src to our include search path so that lmic_project_config can override
; note: TINYGPS_OPTION_NO_CUSTOM_FIELDS is VERY important. We don't use custom fields and somewhere in that pile
; of code is a heap corruption bug!
; FIXME: fix lib/BluetoothOTA dependency back on src/ so we can remove -Isrc
; The Radiolib stuff will speed up building considerably. Exclud all the stuff we dont need.
build_flags = -Wno-missing-field-initializers
-Wno-format
-Isrc -Isrc/mesh -Isrc/mesh/generated -Isrc/gps -Isrc/buzz -Wl,-Map,"${platformio.build_dir}"/output.map
-DUSE_THREAD_NAMES
-DTINYGPS_OPTION_NO_CUSTOM_FIELDS
-DPB_ENABLE_MALLOC=1
-DPB_VALIDATE_UTF8=1
-DRADIOLIB_EXCLUDE_CC1101=1
-DRADIOLIB_EXCLUDE_NRF24=1
-DRADIOLIB_EXCLUDE_RF69=1
-DRADIOLIB_EXCLUDE_SX1231=1
-DRADIOLIB_EXCLUDE_SX1233=1
-DRADIOLIB_EXCLUDE_SI443X=1
-DRADIOLIB_EXCLUDE_RFM2X=1
-DRADIOLIB_EXCLUDE_AFSK=1
-DRADIOLIB_EXCLUDE_BELL=1
-DRADIOLIB_EXCLUDE_HELLSCHREIBER=1
-DRADIOLIB_EXCLUDE_MORSE=1
-DRADIOLIB_EXCLUDE_RTTY=1
-DRADIOLIB_EXCLUDE_SSTV=1
-DRADIOLIB_EXCLUDE_AX25=1
-DRADIOLIB_EXCLUDE_DIRECT_RECEIVE=1
-DRADIOLIB_EXCLUDE_BELL=1
-DRADIOLIB_EXCLUDE_PAGER=1
-DRADIOLIB_EXCLUDE_FSK4=1
-DRADIOLIB_EXCLUDE_APRS=1
-DRADIOLIB_EXCLUDE_ADSB=1
-DRADIOLIB_EXCLUDE_LORAWAN=1
-DMESHTASTIC_EXCLUDE_DROPZONE=1
-DMESHTASTIC_EXCLUDE_REPLYBOT=1
-DMESHTASTIC_EXCLUDE_RANGETEST=1
-DMESHTASTIC_EXCLUDE_REMOTEHARDWARE=1
-DMESHTASTIC_EXCLUDE_HEALTH_TELEMETRY=1
-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
-DMESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE=1
-DMESHTASTIC_EXCLUDE_POWERMON=1
-D MAX_THREADS=40 ; As we've split modules, we have more threads to manage
#-DBUILD_EPOCH=$UNIX_TIME ; set in platformio-custom.py now
#-D OLED_PL=1
#-D DEBUG_HEAP=1 ; uncomment to add free heap space / memory leak debugging logs
#-D DEBUG_LOOP_TIMING=1 ; uncomment to add main loop timing logs
monitor_speed = 115200
monitor_filters = direct
lib_deps =
# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
https://github.com/meshtastic/esp8266-oled-ssd1306/archive/9d9ba7e43ed1a5e1865fc9686513eab47fb079ff.zip
# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
https://github.com/meshtastic/arduino-fsm/archive/7db3702bf0cfe97b783d6c72595e3f38e0b19159.zip
# renovate: datasource=git-refs depName=meshtastic-TinyGPSPlus packageName=https://github.com/meshtastic/TinyGPSPlus gitBranch=master
https://github.com/meshtastic/TinyGPSPlus/archive/71a82db35f3b973440044c476d4bcdc673b104f4.zip
# renovate: datasource=git-refs depName=meshtastic-ArduinoThread packageName=https://github.com/meshtastic/ArduinoThread gitBranch=master
https://github.com/meshtastic/ArduinoThread/archive/b841b0415721f1341ea41cccfb4adccfaf951567.zip
# renovate: datasource=github-tags depName=Nanopb packageName=nanopb/nanopb
https://github.com/nanopb/nanopb/archive/refs/tags/nanopb-0.4.9.1.zip
# renovate: datasource=github-tags depName=ErriezCRC32 packageName=Erriez/ErriezCRC32
https://github.com/Erriez/ErriezCRC32/archive/refs/tags/1.0.1.zip
; Used for the code analysis in PIO Home / Inspect
check_tool = cppcheck
check_skip_packages = yes
check_flags =
-DAPP_VERSION=1.0.0
--suppressions-list=suppressions.txt
--inline-suppr
; Common settings for conventional (non Portduino) Arduino targets
[arduino_base]
framework = arduino
lib_deps =
${env.lib_deps}
# renovate: datasource=github-tags depName=NonBlockingRTTTL packageName=end2endzone/NonBlockingRTTTL
https://github.com/end2endzone/NonBlockingRTTTL/archive/refs/tags/1.4.0.zip
build_unflags =
-std=c++11
-std=gnu++11
build_flags = ${env.build_flags} -Os
-std=gnu++17
build_src_filter = ${env.build_src_filter} -<platform/> +<platform/extra_variants/> -<graphics/niche/>
; Common libs for communicating over TCP/IP networks such as MQTT
[networking_base]
lib_deps =
# renovate: datasource=github-tags depName=TBPubSubClient packageName=thingsboard/pubsubclient
https://github.com/thingsboard/pubsubclient/archive/refs/tags/v2.12.1.zip
# renovate: datasource=github-tags depName=NTPClient packageName=arduino-libraries/NTPClient
https://github.com/arduino-libraries/NTPClient/archive/refs/tags/3.2.1.zip
; Extra TCP/IP networking libs for supported devices
[networking_extra]
lib_deps =
# renovate: datasource=github-tags depName=Syslog packageName=arcao/Syslog
https://github.com/arcao/Syslog/archive/refs/tags/v2.0.zip
[radiolib_base]
lib_deps =
# renovate: datasource=github-tags depName=RadioLib packageName=jgromes/RadioLib
https://github.com/jgromes/RadioLib/archive/6d8934836678d8894e3d556550475b37dce3e2b6.zip
[device-ui_base]
lib_deps =
# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
https://github.com/meshtastic/device-ui/archive/95483d8c6e28fcda2160161d5d5a8825f729df62.zip
; Common libs for environmental measurements in telemetry module
[environmental_base]
lib_deps =
# renovate: datasource=github-tags depName=Adafruit BusIO packageName=adafruit/Adafruit_BusIO
https://github.com/adafruit/Adafruit_BusIO/archive/refs/tags/1.17.4.zip
# renovate: datasource=github-tags depName=Adafruit Unified Sensor packageName=adafruit/Adafruit_Sensor
https://github.com/adafruit/Adafruit_Sensor/archive/refs/tags/1.1.15.zip
# renovate: datasource=github-tags depName=Adafruit GFX packageName=adafruit/Adafruit-GFX-Library
https://github.com/adafruit/Adafruit-GFX-Library/archive/refs/tags/1.12.6.zip
# renovate: datasource=github-tags depName=NeoPixel packageName=adafruit/Adafruit_NeoPixel
https://github.com/adafruit/Adafruit_NeoPixel/archive/1.15.5.zip
# renovate: datasource=github-tags depName=Adafruit SSD1306 packageName=adafruit/Adafruit_SSD1306
https://github.com/adafruit/Adafruit_SSD1306/archive/2.5.17.zip
# renovate: datasource=github-tags depName=Adafruit BMP280 packageName=adafruit/Adafruit_BMP280_Library
https://github.com/adafruit/Adafruit_BMP280_Library/archive/refs/tags/3.0.0.zip
# renovate: datasource=github-tags depName=Adafruit BMP085 packageName=adafruit/Adafruit-BMP085-Library
https://github.com/adafruit/Adafruit-BMP085-Library/archive/refs/tags/1.2.4.zip
# renovate: datasource=github-tags depName=Adafruit BME280 packageName=adafruit/Adafruit_BME280_Library
https://github.com/adafruit/Adafruit_BME280_Library/archive/refs/tags/2.3.0.zip
# renovate: datasource=github-tags depName=Adafruit DPS310 packageName=adafruit/Adafruit_DPS310
https://github.com/adafruit/Adafruit_DPS310/archive/refs/tags/1.1.6.zip
# renovate: datasource=github-tags depName=Adafruit SH110x packageName=adafruit/Adafruit_SH110x
https://github.com/adafruit/Adafruit_SH110x/archive/refs/tags/2.1.14.zip
# renovate: datasource=github-tags depName=Adafruit MCP9808 packageName=adafruit/Adafruit_MCP9808_Library
https://github.com/adafruit/Adafruit_MCP9808_Library/archive/refs/tags/2.0.2.zip
# renovate: datasource=github-tags depName=Adafruit INA260 packageName=adafruit/Adafruit_INA260
https://github.com/adafruit/Adafruit_INA260/archive/refs/tags/1.5.3.zip
# renovate: datasource=github-tags depName=Adafruit INA219 packageName=adafruit/Adafruit_INA219
https://github.com/adafruit/Adafruit_INA219/archive/refs/tags/1.2.3.zip
# renovate: datasource=github-tags depName=Adafruit MPU6050 packageName=adafruit/Adafruit_MPU6050
https://github.com/adafruit/Adafruit_MPU6050/archive/refs/tags/2.2.9.zip
# renovate: datasource=github-tags depName=Adafruit LIS3DH packageName=adafruit/Adafruit_LIS3DH
https://github.com/adafruit/Adafruit_LIS3DH/archive/refs/tags/1.3.0.zip
# renovate: datasource=github-tags depName=Adafruit AHTX0 packageName=adafruit/Adafruit_AHTX0
https://github.com/adafruit/Adafruit_AHTX0/archive/refs/tags/2.0.6.zip
# renovate: datasource=github-tags depName=Adafruit LSM6DS packageName=adafruit/Adafruit_LSM6DS
https://github.com/adafruit/Adafruit_LSM6DS/archive/refs/tags/4.7.4.zip
# renovate: datasource=github-tags depName=Adafruit TSL2591 packageName=adafruit/Adafruit_TSL2591_Library
https://github.com/adafruit/Adafruit_TSL2591_Library/archive/refs/tags/1.4.5.zip
# renovate: datasource=github-tags depName=EmotiBit MLX90632 packageName=emotibit/EmotiBit_MLX90632
https://github.com/EmotiBit/EmotiBit_MLX90632/archive/refs/tags/v1.0.8.zip
# renovate: datasource=github-tags depName=Adafruit MLX90614 packageName=adafruit/Adafruit-MLX90614-Library
https://github.com/adafruit/Adafruit-MLX90614-Library/archive/refs/tags/2.1.6.zip
# renovate: datasource=github-tags depName=INA3221_RT packageName=RobTillaart/INA3221_RT
https://github.com/RobTillaart/INA3221_RT/archive/refs/tags/0.4.2.zip
# renovate: datasource=github-tags depName=QMC5883L Compass packageName=mprograms/QMC5883LCompass
https://github.com/mprograms/QMC5883LCompass/archive/refs/tags/v1.2.3.zip
# renovate: datasource=github-tags depName=DFRobot_RTU packageName=dfrobot/DFRobot_RTU
https://github.com/DFRobot/DFRobot_RTU/archive/refs/tags/V1.0.6.zip
# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
# renovate: datasource=github-tags depName=INA226 packageName=robtillaart/INA226
https://github.com/RobTillaart/INA226/archive/refs/tags/0.6.6.zip
# renovate: datasource=github-tags depName=SparkFun MAX3010x packageName=sparkfun/SparkFun_MAX3010x_Sensor_Library
https://github.com/sparkfun/SparkFun_MAX3010x_Sensor_Library/archive/refs/tags/v1.1.2.zip
# renovate: datasource=github-tags depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/SparkFun_ICM-20948_ArduinoLibrary
https://github.com/sparkfun/SparkFun_ICM-20948_ArduinoLibrary/archive/refs/tags/v1.3.2.zip
# renovate: datasource=github-tags depName=TDK InvenSense ICM42670P packageName=tdk-invn-oss/motion.arduino.ICM42670P
https://github.com/tdk-invn-oss/motion.arduino.ICM42670P/archive/refs/tags/1.0.8.zip
# renovate: datasource=github-tags depName=Adafruit LTR390 Library packageName=adafruit/Adafruit_LTR390
https://github.com/adafruit/Adafruit_LTR390/archive/refs/tags/1.1.2.zip
# renovate: datasource=github-tags depName=Adafruit PCT2075 packageName=adafruit/Adafruit_PCT2075
https://github.com/adafruit/Adafruit_PCT2075/archive/1.3.1.zip
# renovate: datasource=github-tags depName=DFRobot_BMM150 packageName=dfrobot/DFRobot_BMM150
https://github.com/DFRobot/DFRobot_BMM150/archive/refs/tags/V1.0.0.zip
# renovate: datasource=github-tags depName=SparkFun MMC5983MA Magnetometer packageName=sparkfun/SparkFun_MMC5983MA_Magnetometer_Arduino_Library
https://github.com/sparkfun/SparkFun_MMC5983MA_Magnetometer_Arduino_Library/archive/v1.1.5.zip
# renovate: datasource=github-tags depName=Adafruit_TSL2561 packageName=adafruit/Adafruit_TSL2561
https://github.com/adafruit/Adafruit_TSL2561/archive/refs/tags/1.1.3.zip
# renovate: datasource=github-tags depName=BH1750_WE packageName=wollewald/BH1750_WE
https://github.com/wollewald/BH1750_WE/archive/refs/tags/1.1.10.zip
# renovate: datasource=git-refs depName=Fusion packageName=https://github.com/meshtastic/Fusion gitBranch=main
https://github.com/meshtastic/Fusion/archive/936e1eb1e5ea19e8f4ed467526f91adeebb4f53c.zip
# renovate: datasource=github-tags depName=Sensirion Core packageName=sensirion/arduino-core
https://github.com/Sensirion/arduino-core/archive/refs/tags/0.7.3.zip
# renovate: datasource=github-tags depName=Sensirion I2C SCD4x packageName=sensirion/arduino-i2c-scd4x
https://github.com/Sensirion/arduino-i2c-scd4x/archive/refs/tags/1.1.0.zip
# renovate: datasource=github-tags depName=Sensirion I2C SFA3x packageName=sensirion/arduino-i2c-sfa3x
https://github.com/Sensirion/arduino-i2c-sfa3x/archive/refs/tags/1.0.0.zip
# renovate: datasource=github-tags depName=Sensirion I2C SCD30 packageName=sensirion/arduino-i2c-scd30
https://github.com/Sensirion/arduino-i2c-scd30/archive/1.1.1.zip
# renovate: datasource=github-tags depName=arduino-sht packageName=sensirion/arduino-sht
https://github.com/Sensirion/arduino-sht/archive/refs/tags/v1.2.6.zip
# renovate: datasource=github-tags depName=SPA06_003 packageName=adafruit/Adafruit_SPA06_003
https://github.com/adafruit/Adafruit_SPA06_003/archive/refs/tags/1.0.2.zip
; Common environmental sensor libraries (not included in native / portduino)
[environmental_extra_common]
lib_deps =
# renovate: datasource=github-tags depName=Adafruit BMP3XX packageName=adafruit/Adafruit_BMP3XX
https://github.com/adafruit/Adafruit_BMP3XX/archive/refs/tags/2.1.6.zip
# renovate: datasource=github-tags depName=Adafruit MAX1704X packageName=adafruit/Adafruit_MAX1704X
https://github.com/adafruit/Adafruit_MAX1704X/archive/refs/tags/1.0.3.zip
# renovate: datasource=github-tags depName=Adafruit LPS2X packageName=adafruit/Adafruit_LPS2X
https://github.com/adafruit/Adafruit_LPS2X/archive/refs/tags/2.0.6.zip
# renovate: datasource=github-tags depName=Adafruit VEML7700 packageName=adafruit/Adafruit_VEML7700
https://github.com/adafruit/Adafruit_VEML7700/archive/refs/tags/2.1.6.zip
# renovate: datasource=github-tags depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/SparkFun_Qwiic_Scale_NAU7802_Arduino_Library
https://github.com/sparkfun/SparkFun_Qwiic_Scale_NAU7802_Arduino_Library/archive/refs/tags/v1.0.6.zip
# renovate: datasource=custom.pio depName=ClosedCube OPT3001 packageName=closedcube/library/ClosedCube OPT3001
closedcube/ClosedCube OPT3001@1.1.2
# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
# renovate: datasource=github-tags depName=Adafruit DS248x packageName=adafruit/Adafruit_DS248x
https://github.com/adafruit/Adafruit_DS248x/archive/refs/tags/1.2.0.zip
; Environmental sensors with BSEC2 (Bosch proprietary IAQ)
[environmental_extra]
lib_deps =
${environmental_extra_common.lib_deps}
# renovate: datasource=github-tags depName=Bosch BSEC2 packageName=boschsensortec/Bosch-BSEC2-Library
https://github.com/boschsensortec/Bosch-BSEC2-Library/archive/refs/tags/1.10.2610.zip
# renovate: datasource=github-tags depName=Bosch BME68x packageName=boschsensortec/Bosch-BME68x-Library
https://github.com/boschsensortec/Bosch-BME68x-Library/archive/refs/tags/v1.3.40408.zip
; Environmental sensors without BSEC (saves ~3.5KB DRAM for original ESP32 targets)
[environmental_extra_no_bsec]
lib_deps =
${environmental_extra_common.lib_deps}
# renovate: datasource=github-tags depName=Adafruit_BME680 packageName=adafruit/Adafruit_BME680
https://github.com/adafruit/Adafruit_BME680/archive/refs/tags/2.0.6.zip
View Git Blame Copy Permalink