Move spiffs examples, restructure params examples

examples/AutoConnect/AutoConnectWithFeedbackLED/AutoConnectWithFeedbackLED.ino

@@ -1,71 +0,0 @@
-// LED will blink when in config mode
-
-#include <WiFiManager.h> // https://github.com/tzapu/WiFiManager
-
-//for LED status
-#include <Ticker.h>
-Ticker ticker;
-
-#ifndef LED_BUILTIN
-#define LED_BUILTIN 13 // ESP32 DOES NOT DEFINE LED_BUILTIN
-#endif
-
-int LED = LED_BUILTIN;
-
-void tick()
-{
-  //toggle state
-  digitalWrite(LED, !digitalRead(LED));     // set pin to the opposite state
-}
-
-//gets called when WiFiManager enters configuration mode
-void configModeCallback (WiFiManager *myWiFiManager) {
-  Serial.println("Entered config mode");
-  Serial.println(WiFi.softAPIP());
-  //if you used auto generated SSID, print it
-  Serial.println(myWiFiManager->getConfigPortalSSID());
-  //entered config mode, make led toggle faster
-  ticker.attach(0.2, tick);
-}
-
-void setup() {
-  WiFi.mode(WIFI_STA); // explicitly set mode, esp defaults to STA+AP
-  // put your setup code here, to run once:
-  Serial.begin(115200);
-  
-  //set led pin as output
-  pinMode(LED, OUTPUT);
-  // start ticker with 0.5 because we start in AP mode and try to connect
-  ticker.attach(0.6, tick);
-
-  //WiFiManager
-  //Local intialization. Once its business is done, there is no need to keep it around
-  WiFiManager wm;
-  //reset settings - for testing
-  // wm.resetSettings();
-
-  //set callback that gets called when connecting to previous WiFi fails, and enters Access Point mode
-  wm.setAPCallback(configModeCallback);
-
-  //fetches ssid and pass and tries to connect
-  //if it does not connect it starts an access point with the specified name
-  //here  "AutoConnectAP"
-  //and goes into a blocking loop awaiting configuration
-  if (!wm.autoConnect()) {
-    Serial.println("failed to connect and hit timeout");
-    //reset and try again, or maybe put it to deep sleep
-    ESP.restart();
-    delay(1000);
-  }
-
-  //if you get here you have connected to the WiFi
-  Serial.println("connected...yeey :)");
-  ticker.detach();
-  //keep LED on
-  digitalWrite(LED, LOW);
-}
-
-void loop() {
-  // put your main code here, to run repeatedly:
-
-}