Merge branch 'develop' into sfpp

bin/check-all.sh

@@ -23,4 +23,4 @@ for BOARD in $BOARDS; do
 	CHECK="${CHECK} -e ${BOARD}"
 done
 
-pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=low --fail-on-defect=medium --fail-on-defect=high

bin/config.d/lora-hat-rak-6421-pi-hat.yaml

@@ -9,3 +9,5 @@ Lora:
   DIO3_TCXO_VOLTAGE: true
   DIO2_AS_RF_SWITCH: true
   spidev: spidev0.0
+  GPIO_DETECT_PA: 13
+  TX_GAIN_LORA: [8, 8, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7]

bin/config.d/lora-lyra-ultra_1w.yaml

@@ -0,0 +1,16 @@
+# For use with Armbian luckfox-lyra-ultra-w
+# Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
+# https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
+# 1 Watt Lyra Ultra hat
+Lora:
+  Module: sx1262
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  CS: 10
+  IRQ: 5
+  Busy: 11
+  Reset: 9
+  RXen: 14
+
+  spidev: spidev0.0 #pins are (CS=10, CLK=8, MOSI=6, MISO=7)
+  spiSpeed: 2000000

bin/config.d/lora-lyra-ultra_2w.yaml

@@ -0,0 +1,17 @@
+# For use with Armbian luckfox-lyra-ultra-w
+# Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
+# https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
+# 2 Watt Lyra Ultra hat
+Lora:
+  Module: sx1262
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  SX126X_MAX_POWER: 8
+  CS: 10
+  IRQ: 5
+  Busy: 11
+  Reset: 9
+  RXen: 14
+
+  spidev: spidev0.0 #pins are (CS=10, CLK=8, MOSI=6, MISO=7)
+  spiSpeed: 2000000

bin/config.d/lora-lyra-ws-raspberry-pi-pico-hat.yaml

@@ -0,0 +1,25 @@
+# For use with Armbian luckfox-lyra // luckfox-lyra-plus
+# Enable overlay 'luckfox-lyra-plus-spi0-cs0_rmio13-spidev' with armbian-config
+# Waveshare LoRa HAT for Raspberry Pi Pico
+# https://www.waveshare.com/wiki/Pico-LoRa-SX1262
+Lora:
+  Module: sx1262
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  spidev: spidev0.0
+  CS: # GPIO0_B5
+    pin: 13
+    gpiochip: 0
+    line: 13
+  IRQ: # GPIO1_C2
+    pin: 50
+    gpiochip: 1
+    line: 18
+  Busy: # GPIO0_B4
+    pin: 12
+    gpiochip: 0
+    line: 12
+  Reset: # GPIO0_A2
+    pin: 2
+    gpiochip: 0
+    line: 2

bin/config.d/lora-usb-umesh-1262-30dbm.yaml

@@ -13,8 +13,7 @@ Lora:
 #  USB_Serialnum: 12345678
   SX126X_MAX_POWER: 22
 # Reduce output power to improve EMI
-  NUM_PA_POINTS: 22
-  TX_GAIN_LORA: 12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7
+  TX_GAIN_LORA: [12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7]
 # Note: This module integrates an additional PA to achieve higher output power.
 # The 'power' parameter here does not represent the actual RF output.
 # TX_GAIN_LORA defines the gain offset applied at each SX1262 input power step (1–22 dBm).

bin/config.d/lora-usb-umesh-1268-30dbm.yaml

@@ -13,8 +13,7 @@ Lora:
 #  USB_Serialnum: 12345678
   SX126X_MAX_POWER: 22
 # Reduce output power to improve EMI
-  NUM_PA_POINTS: 22
-  TX_GAIN_LORA: 12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7
+  TX_GAIN_LORA: [12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7]
 # Note: This module integrates an additional PA to achieve higher output power.
 # The 'power' parameter here does not represent the actual RF output.
 # TX_GAIN_LORA defines the gain offset applied at each SX1262 input power step (1–22 dBm).

bin/test-native-docker.sh

@@ -0,0 +1,44 @@
+#!/usr/bin/env bash
+# Run native PlatformIO tests inside Docker (for macOS / non-Linux hosts).
+#
+# Usage:
+#   ./bin/test-native-docker.sh                          # run all native tests
+#   ./bin/test-native-docker.sh -f test_transmit_history  # run specific test filter
+#   ./bin/test-native-docker.sh --rebuild                 # force rebuild the image
+#
+set -euo pipefail
+
+SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
+ROOT_DIR="$(cd "$SCRIPT_DIR/.." && pwd)"
+IMAGE_NAME="meshtastic-native-test"
+
+REBUILD=false
+EXTRA_ARGS=()
+
+for arg in "$@"; do
+    if [[ "$arg" == "--rebuild" ]]; then
+        REBUILD=true
+    else
+        EXTRA_ARGS+=("$arg")
+    fi
+done
+
+if $REBUILD || ! docker image inspect "$IMAGE_NAME" >/dev/null 2>&1; then
+    echo "Building test image (first run may take a few minutes)..."
+    docker build -t "$IMAGE_NAME" -f "$ROOT_DIR/Dockerfile.test" "$ROOT_DIR"
+fi
+
+# Disable BUILD_EPOCH to avoid full rebuilds between test runs (matches CI)
+sed_cmd='s/-DBUILD_EPOCH=$UNIX_TIME/#-DBUILD_EPOCH=$UNIX_TIME/'
+
+# Default: run all tests. Pass extra args (e.g. -f test_transmit_history) through.
+if [[ ${#EXTRA_ARGS[@]} -eq 0 ]]; then
+    CMD=("platformio" "test" "-e" "coverage" "-v")
+else
+    CMD=("platformio" "test" "-e" "coverage" "-v" "${EXTRA_ARGS[@]}")
+fi
+
+exec docker run --rm \
+    -v "$ROOT_DIR:/src:ro" \
+    "$IMAGE_NAME" \
+    bash -c "rm -rf /tmp/fw-test && cp -a /src /tmp/fw-test && cd /tmp/fw-test && sed -i '${sed_cmd}' platformio.ini && ${CMD[*]}"