initial setup for lora

variants/esp32p4/crowpanel-advanced-p4/platformio.ini

@@ -0,0 +1,18 @@
+[env:crowpanel-advanced-p4-50]
+extends = esp32p4_base
+board = esp32-p4-evboard
+board_build.partitions = default_16MB.csv
+board_level = pr
+
+build_flags = 
+  ${esp32p4_base.build_flags}
+  -D CROWPANEL_ADV_P4_50
+  -I variants/esp32p4/crowpanel-advanced-p4
+  -DARDUINO_USB_CDC_ON_BOOT=0
+  -DARDUINO_USB_MODE=1
+;  -DSOC_USB_OTG_SUPPORTED=1
+
+lib_deps =
+  ${esp32p4_base.lib_deps}
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  lewisxhe/XPowersLib@0.3.2

variants/esp32p4/crowpanel-advanced-p4/variant.h

@@ -0,0 +1,18 @@
+#define I2C_SDA 45 // I2C pins for touch screen
+#define I2C_SCL 46
+
+#define BUTTON_PIN 0
+
+#define USE_SX1262
+#define LORA_SCK 26
+#define LORA_MISO 47
+#define LORA_MOSI 48
+#define LORA_CS 30
+#define LORA_RESET 32
+
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 31
+#define SX126X_BUSY 29
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 3.3