* fix(test): make the native-windows test suite build and run
pio test -e native-windows failed every suite at the build stage. Five
independent causes, all Windows-only:
- TestUtil.cpp called lstat(), which MinGW-w64 does not provide. The
state-checkpoint walk added in #11322 is fenced with ARCH_PORTDUINO,
which native-windows also satisfies, so all 53 suites failed to
compile. Route it through a stat() shim on _WIN32.
- test_default, test_http_content_handler, test_meshpacket_serializer
and test_serial define no setUp/tearDown and relied on the weak
defaults PlatformIO emits in unity_config.c. GCC lowers a weak
definition on PE-COFF to a weak external, leaving the symbol
undefined, so it does not satisfy unity.c's reference and the link
fails. Define them explicitly, as the other 49 suites already do.
- test_mqtt included <arpa/inet.h>, absent on MinGW, for htonl(). Use
winsock2.h there.
- test_gps_update_scheduling uses TEST_ASSERT_DOUBLE_WITHIN. Unity
omits double support unless UNITY_INCLUDE_DOUBLE is defined, so the
assertion compiled to an unconditional failure. Define it for the
env.
- test_getfiles_rejects_overlong_path is excluded on _WIN32. Overrunning
the 228-byte file_name needs at least 229 bytes below the portduino
root, and that root is already ~34 bytes, so every qualifying path
passes the 260-byte MAX_PATH: the nested mkdir() fails, the file is
never created, and getFiles() has nothing to drop. No component
layout satisfies both limits.
Each of the seven suites that failed on Windows was verified
individually after the change. test_fscommon_getfiles still fails in a
full run, for a cause outside this change: rmDir() does not remove
directories on Windows, so empty dirs left by an earlier run survive
setUp() and make getFiles() report a depth truncation. That is a
pre-existing FSCommon bug, reported separately.
No Linux or macOS behaviour changes: every guard is _WIN32-only except
UNITY_INCLUDE_DOUBLE, which is scoped to env:native-windows.
* fix(test): define UNITY_INCLUDE_DOUBLE for every native env
The flag was scoped to env:native-windows, but the gap is not
Windows-specific. Verified on Debian with gcc against the Linux env's
own Unity 2.6.1 and PlatformIO's generated native unity_config:
UNITY_INCLUDE_DOUBLE : NOT defined
UNITY_EXCLUDE_DOUBLE : defined
test_double_within:FAIL: Unity Double Precision Disabled
UNITY_INCLUDE_DOUBLE appears nowhere in the repo, the ini files, the
workflow, or PlatformIO's unity runner, which adds only
UNITY_INCLUDE_CONFIG_H. So TEST_ASSERT_DOUBLE_* is an always-failing
stub on Linux and macOS too, not only on Windows.
Moved to portduino_base.build_flags_common, which every native env
resolves: native, native-tft, native-fb, native-tft-debug, coverage,
coverage-event-policy, native-macos, native-windows and native-wasm.
This does change Linux and macOS: TEST_ASSERT_DOUBLE_* becomes a real
comparison instead of a stub. test_gps_update_scheduling is the only
suite using those macros and its arithmetic is integer-based and
bit-identical across platforms, so it should pass wherever it runs.
Note it currently reports PASSED on CI in 0.03s while emitting no Unity
output at all, so those assertions appear never to execute there; that
is tracked separately and is not addressed here.
* fix(mesh): keep ROUTING_APP responses when toPhoneQueue is full
#2918 narrowed the overflow policy to evict the oldest entry only for
TEXT_MESSAGE_APP and RANGE_TEST_APP, dropping every other portnum. A
dropped ROUTING_APP response leaves the phone with no delivery
confirmation for a message it sent.
Add ROUTING_APP to the eviction list and pin the policy in
test/test_tophone_queue.
Fixes#11439
* fix(mesh): gate the queue-overflow portnum check on the decoded variant
decoded.portnum aliases encrypted.size in the payload union, so an
encrypted packet could be read as a privileged portnum by its ciphertext
length. Restore config.device.rebroadcast_mode in the test teardown.
* test: rename a test to avoid a trufflehog false positive
test_text_still_admitted_when_queue_full is "test_" followed by exactly
35 characters, which matches the Lob API key shape and fails trunk check.
* fix(Power): survive a BQ27220 fuel gauge that fails to init
Keep the BQ25896 as the battery source when only the gauge fails, so Power
stays enabled instead of falling through to an ADC that these variants do not
have. Null-guard the gauge in getBattVoltage() and isCharging().
Retry the gauge from the power thread (3 attempts, 60s apart, address probe
first) since it is soldered on, and reset the I2C master after a failed init
so the bus scan does not run against a stale transaction.
Fixes#11372
* fix(Power): address review feedback on the BQ27220 retry
Derive "no attempt yet" from gaugeAttemptsLeft instead of a millis() zero
sentinel, drop the zero-padding on the logged I2C address, and condense the
new comment blocks.
* fix(bin): correct filename check and esptool v5 subcommands in .bat installers
device-install.bat rejected every valid firmware-*.factory.bin name. The
substring-strip comparison was negated, so it errored when the suffix was
present instead of when it was absent.
Both scripts hardcoded esptool subcommand spellings. device-install.bat used
the v4 underscore forms only. device-update.bat used the v5 write-flash with
the v4 read_flash_status, so it worked fully on neither version. Probe the
help output once and select the spelling, mirroring bin/device-install.sh.
The probe uses %ESPTOOL_CMD% rather than !ESPTOOL_CMD! because cmd does not
split a delayed-expanded command token carrying a path into program and
arguments.
Fixes#8156
* fix(bin): make the -P interpreter option work in the .bat installers
Both scripts invoked ESPTOOL_CMD through delayed expansion. cmd does not split
a delayed-expanded command token that carries a path into program and
arguments, so "-P C:\path\python.exe" exited 9009 and the scripts reported
"esptool not found". Use %ESPTOOL_CMD% at the two command positions per file.
device-update.bat additionally wrapped the interpreter in doubled quotes, which
made python treat python.exe as a source file. Quote the path once, as
device-install.bat does, so interpreter paths containing spaces also work.
* fix(bin): anchor the .factory.bin suffix check and harden esptool detection
The filename check matched .factory.bin anywhere in the name, so
firmware-x.factory.bin.bak passed and the script then derived
firmware-x.bak.mt.json for metadata. Compare the last 12 characters instead,
matching the anchored glob in bin/device-install.sh.
A quoted interpreter path that does not exist returns 3 rather than 9009, so
the missing-esptool check skipped it and the script died at the probe with no
message. Treat 3 as missing as well.
device-update.bat read %ERRORLEVEL% after a CALL that overwrote it, so the
missing-esptool check never fired. Capture the exit code before logging it.
* fix(lora): skip DIO detach when no ISR is attached
Fixes#11371
* fix(lora): latch the ISR-armed flag instead of tracking attach state
The flag is now written once from task context and only read from ISR context.
* Add shared e-ink hardware layer (graphics/eink) alongside legacy drivers
Foundation for a target-by-target migration off the GxEPD2-based
EInkDisplay2/EInkDynamicDisplay/EInkParallelDisplay stack:
- src/graphics/eink/: chipset drivers, panel profiles, backlight helper
(promoted from the InkHUD driver set, shared by BaseUI and InkHUD)
- src/graphics/BaseUIEInkDisplay: OLEDDisplay adapter driving the new
layer, with EINK_* compat macros matching EInkDynamicDisplay
- [niche] build helper in platformio.ini; graphics/eink/ excluded from
arduino_base so unconverted targets are unaffected
- Screen/CannedMessageModule dispatch between the two stacks per env
- InkHUD-specific touch code in TouchScreenImpl1 guarded with
MESHTASTIC_INCLUDE_INKHUD (no-op today, required once BaseUI variants
define MESHTASTIC_INCLUDE_NICHE_GRAPHICS without InkHUD)
No variant is converted and no legacy file is removed; every existing
env builds identical firmware.
* Fix clang-format comment alignment in Screen.cpp
* Address review findings in the e-ink driver layer
- Screen.cpp: exclude InkHUD builds from all NicheGraphics BaseUI guards
- BaseUIEInkDisplay: size the OLEDDisplay buffer from its actual indexing
- EInkParallel: defer update() while an async refresh is in flight, honor
the selected clear mode in the async task, never delete a live task
- ED047TC1: clean up on failed initPanel, fix inverted bbepI2CWrite checks
- UC8175: drop bogus 0x12 soft reset (0x12 is display refresh on UC8175)
- LCMEN2R13EFC1: guard absent reset pin, bound the busy wait
- SSD16XX/SSD1682: build the RAM window from the instance, not statics
- Doc corrections in driver banners and Drivers/README
* SSD16XX/SSD1682: send inclusive Y-end address (height - 1)
* LCMEN213EFC1: adopt the shared wait timeout / fail-through pattern
wait() now bounds the busy poll via Throttle and sets the EInk failed
flag on timeout; sendCommand/sendData fail through like the SSD16XX and
UC8175 drivers. EInk::runOnce clears the flag after the failed cycle.
Let's Encrypt Generation Y chains sign a P-256 leaf with the P-384
intermediate YE1 under ISRG Root YE. mqtt.meshtastic.org switched to
this chain on 2026-07-29. With CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=n
mbedtls cannot parse the peer chain and the TLS handshake aborts with
MBEDTLS_ERR_PK_UNKNOWN_NAMED_CURVE, breaking MQTT over TLS on every
ESP32 target.
Costs about 4 kB of flash.
Fixes#11316
* indicator: RP2040 peripherals for the main firmware
The SenseCAP Indicator RP2040 co-processor serves as a generic
peripheral bridge over a serial protobuf link (interdevice.proto):
- FakeI2C implements TwoWire and tunnels write and read transactions,
so the standard sensor drivers and the I2C scan work unmodified on
the bridged second bus (WIRE1)
- FakeUART forwards GPS NMEA to the regular GPS driver
- SD card access with chunked file transfers, paged directory
listings and card statistics; device-ui loads map tiles and map
styles from the card behind the RP2040
- link at 2M baud with 4KB chunks, message structs kept off task
stacks
Log messages carrying their own bracket tag render it like a thread
name. Replaces the earlier IndicatorSensor/COBS approach.
* indicator: address review
Correlate responses with request ids, serialize the shared TX buffer,
reject oversized frames, fix RX buffer overflow and NMEA truncation,
full-length file paths.
* indicator: assign the GPS FakeUART at runtime
Static initialization order across translation units is undefined,
so createGps() assigns and null-checks the bridged serial instead.
Bound the NMEA length defensively.
* indicator: bump device-ui pin to 27e6c0c
* indicator: ping/pong link probe, non-blocking runOnce, FakeI2C locking
The RP2040 sends nothing unsolicited without a GPS module attached, so
wait_ready now probes with the new ping message instead of listening
passively. runOnce skips its pump while a requester holds link_lock,
keeping the main loop from blocking for a full request timeout. FakeI2C
serializes transactions between the UI task and the main loop with an
owner-tracked lock held from beginTransmission to transaction end.
* indicator: link resync, config-honoring GPS, bridged-bus routing, stats validity
Frame resync scans to the next magic instead of flushing the RX buffer,
and the pump handles all buffered frames per pass. The RX drain reads in
bulk and the protobuf encoder gets the correct buffer bound. GPS honors
the gps_mode setting on the Indicator instead of always running. RTC,
I2C keyboard and motion sensor drivers resolve WIRE1 through
ScanI2CTwoWire::fetchI2CBus so bridged buses reach the right transport.
FakeUART implements flush/availableForWrite/const-write from the Stream
contract and fences its cross-core ring buffer. SdCardInfo.stats_valid
is passed through to device-ui, and the remote FS backend gains the
remove operation used for cleanup of failed tile saves.
* indicator: retry lost link round trips, I2CResult UNSPECIFIED
Remote FS operations retry once on a transport timeout. Correlation ids
drop late responses of the first attempt; a retried append whose first
attempt landed is recognized by the offset conflict carrying the
resulting file size. Definitive failures are not retried, missing-tile
probes stay a single round trip. Regenerated bindings add the
I2CResult.Status UNSPECIFIED zero value so an empty result cannot
decode as success.
* indicator: nack responses, rename bridge classes to I2CProxy/UARTProxy
A request the co-processor cannot decode or handle is nacked, so the
requester fails fast instead of burning its timeout. All requests stage
the shared tx_message under link_lock. FakeI2C and FakeUART are renamed
to I2CProxy and UARTProxy after the pattern they implement, with their
instances following suit. Drops dead code (unused NO_NEWS_PAUSE,
unreachable not-running branches, doubled include guards) and the GPS
pin log line that is meaningless on the tunneled port.
* indicator: refuse a co-processor that speaks another protocol version
The ping/pong handshake now carries InterdeviceVersion. A pong reporting
a version other than ours means the RP2040 runs firmware that does not
match this build, so the bridge stays shut down for the session and the
mismatch is logged with both versions. Requests fail fast instead of
being misinterpreted by the other side.
* indicator: regen protos, interdevice protocol version 2
* indicator: per-task I2C contexts, gated handshake, retryable link failures
The bridged I2C bus is shared between the main loop and the UI task, and
TwoWire has no transaction bracket a lock can span: drivers drain the read
buffer with available()/read() long after requestFrom() returned. Each
calling task therefore gets its own staging and read buffers instead of a
lock that could be left held (or that could not protect the read buffer
anyway). The transaction is staged inside the link, under its lock.
No request is sent before the co-processor has completed the version
handshake, and runOnce keeps probing until it does, so a co-processor that
boots slowly or reboots on its watchdog no longer leaves the bridge dead
for the session. Requests in flight are counted, not flagged: two threads
can be in a request and the first one out must not clear the other's state.
File operations are retried on a lost frame and on a co-processor busy with
card maintenance, but not on a refusal (nack) or a definitive failure, and
they release the SPI lock while they wait so a slow link does not starve
the radio.
* indicator: fail safe on a peer mismatch, wait out card maintenance
FileStatus moved to a fresh tag: reusing the tag of the removed success flag
made every failure status decode as success on a peer that predates it.
A card being mounted (busy) is retried rather than reported as an empty
slot, and a co-processor busy with card maintenance is waited out: mounting
takes seconds and the free space scan of a large card walks its whole FAT,
which is not a reason to report a missing tile. The bridged I2C bus releases
the SPI lock as well, so the keyboard scan on the UI task cannot starve the
radio either. Slot claims in the I2C proxy are atomic, NMEA is not sent to a
peer we refuse to talk to, and the handshake is completed by the unsolicited
ping the co-processor sends when it has booted, which also reports a
reboot.
* indicator: regen protos, FileStatus back on the original tags
* indicator: regen protos, ping/pong carry the InterdeviceVersion enum
* indicator: point the protobufs submodule at the merged interdevice protos
* indicator: pin device-ui to the branch with the remote SD support
* indicator: honor the txOnly flag of flush, report dropped GPS writes
flush() through a Stream pointer discarded the receive buffer: the flag is
txOnly, and HardwareSerial::flush() keeps what has been received. write()
reported bytes as written even when the link refused to send them. The link
probe uses Throttle for its rate limit.
* indicator: decide the log tag on the formatted message, hex request ids
The thread tag was suppressed based on the printf template, which disagrees
with the rendered message it is compared against: a format starting with a
conversion could produce two tags, and one without a trailing bracket-space
lost the tag entirely. vprintf now receives the thread name and picks. Also
shifts only the bytes actually buffered after a frame, throttles with
Throttle and logs request ids as hex.
* indicator: SD mount, eject and format commands over the link
* indicator: bound how long a busy card state blocks the UI task
* indicator: a busy co-processor must not block the UI task for ever
The busy retry re-armed its own budget on every busy answer, so a
co-processor that stayed busy kept the caller in the loop with no way out.
Transport retries and the wait for a busy card are now separate budgets that
only count down.
* indicator: start each request from an aligned receive buffer
A byte run lost mid-response (a UART overflow during a 4KB tile chunk, when
the display starves the RX interrupt) misaligns the assembly buffer. The
buffer was never reset, so the poison outlived the request and cascaded into
the following chunks of the same tile: one glitch dropped a whole multi-chunk
tile, while single-chunk tiles resynced in the idle gap and survived. Each
request now flushes the buffer first, bounding a glitch to the one chunk it
hit. Adds resync/decode/timeout counters, logged rarely, to see the rate.
* indicator: enlarge the LVGL heap for low-zoom map tiles
The heap was 3MB and the image cache reserves 1.5MB of it, so a low-zoom map
tile could not find a large enough contiguous block to decode and rendered
white. 5MB of the 8MB PSRAM fixes it with room to spare.
* indicator: advance the device-ui and protobufs pins to the merged commits
Point the protobufs submodule at the merged SD command protos (protobufs
#986) so it matches the checked in interdevice sources, and bump the
device-ui archive to the current indicator branch tip that carries the SD
button and format UI.
* Update device-ui library dependency URL
* remove cutom sdkconfig
* remove duplicated synchronisation (after PR11278 is in place)
* set commit reference to updated RemoteSDService class
* Add board_level configuration for release
* fix cppcheck errors
---------
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
Co-authored-by: CodeRabbit <noreply@coderabbit.ai>
Co-authored-by: mverch67 <manuel.verch@gmx.de>
* Checksum NMEA sentences from the $ delimiter
The PositionLite printWPL() format begins with a CRLF, so the fixed start offset of 1 folded the newline and the $ into the checksum and every sentence went out with a wrong value. Locate the $ instead and stop at the terminator or a \*.
* Clamp truncated writes and harden the remaining fixed buffers
snprintf returns the length it would have written, so a truncated NMEA sentence
made buf + len point past the buffer and bufsz - len underflow into a huge size
for the checksum append. Clamp after each write.
Also pulls in the rest of #11236: the two remaining Dropzone sprintf calls, the
dead strcpy in mt_sprintf that wrote one byte past a zero-size allocation for an
empty format, and the 10-byte errcode buffer that INT32_MIN overflows.
Co-Authored-By: Andrew Yong <me@ndoo.sg>
* Bail out on a zero-sized buffer and cast err for %ld
snprintf writes nothing at all when bufsz is 0, not even a terminator, so the
checksum helper would run strchr over whatever the buffer already held. Return
before touching it.
int32_t is not long on every target, so cast before formatting with %ld.
Co-Authored-By: Andrew Yong <me@ndoo.sg>
* Add NMEA sentence regression tests
Covers checksum computation from the $ delimiter for both printWPL
overloads and printGGA, zero-sized buffers, and truncated buffers down
to one byte.
Co-Authored-By: Andrew Yong <me@ndoo.sg>
* Tighten checksum parsing and pin the WPL fixture checksum
Require exactly two hex digits followed by the sentence terminator, and
assert both WPL overloads against a known checksum instead of comparing
them to each other.
* Bump native suite count to 43
---------
Co-authored-by: Andrew Yong <me@ndoo.sg>
* Package meshtasticd for Windows as an MSI
Adds a --service flag connecting meshtasticd to the Service Control
Manager, a WiX MSI installing it as an auto-start LocalSystem service with
config in %ProgramData%\Meshtastic, and a CI step attaching the MSI to
releases.
* Address review comments
Bind workflow expressions to env vars in run: bodies, and build the
service status per call with an atomic checkpoint.
* Fix service stop state and CI lint
Latch the stop under a mutex so a startup report cannot walk the state
back. Ignore the new workflows in semgrep and checkov, as main_matrix
already is.
* Drop the checkov ignore for the winget workflow
Resolve the newest release inside the job instead of taking
workflow_dispatch inputs, so CKV_GHA_7 no longer fires and checkov stays
active on the file.
* Carry the MSI architecture into the winget manifest
Parse it from the asset name instead of defaulting to x64, and fail on a
multi-arch release rather than validating one at random.
* Restore release/.gitignore
* Leave the main matrix alone
Release attachment moves to the matrix rework in #11151. The MSI is still
built and uploaded as a CI artifact.
---------
Co-authored-by: Austin <vidplace7@gmail.com>
* Add Elecrow ThinkNode M8 variant scaffold (thinknode_m8)
nRF52840 + SX1262 + 2.4" e-paper + ATGM336H-5NR32 GPS.
All pins resolved from ThinkNode_M8_V0.3.sch; cross-checked
against meshtastic/firmware#9181 (Elecrow V0.1 reference).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* Add Elecrow ThinkNode M8 board support (nRF52840/SX1262, 1.54in e-ink, ATGM336H GNSS, SC7A20, EC04 encoder)
* Address review: keep the stored backlight level out of blanking, match only the SC7A20 WHO_AM_I byte, and transfer detents atomically
* Use std::atomic for the press-and-turn detent counter so native builds compile
* Drop the ThinkNode M8 LED_BUILTIN redefinition that warned on every translation unit
---------
Co-authored-by: claude[bot] <41898282+claude[bot]@users.noreply.github.com>
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* Guard the deferred local queue and depth counter
* Close the drain and enqueue race on the deferred queue
* Route the raced loopback through handleReceived
* Make the last-frame check and depth decrement atomic
* Correct the handleReceived doc comment
* Redact the pairing PIN from unauthorized lockdown clients
* Fail the build when PacketAPI would bypass the lockdown gate
* Compact kept favorites when resetting the node database
* Make the compaction loop reference const
* add LR 2021 to portduino, and allow Framebuffer devices to rotate the screen from config. Requires https://github.com/meshtastic/device-ui/pull/355 and supersedes https://github.com/meshtastic/firmware/pull/10567 and https://github.com/meshtastic/firmware/pull/11138
Many thanks to the original authors https://github.com/a-li3n and https://github.com/jessm33
* Build LR2021Interface.cpp in the wasm env
initLoRa() constructs LR2021Interface for Lora.Module: lr2021, so excluding
the file from the native-wasm source filter left the constructor undefined at
link time. LR20x0Interface.cpp stays excluded; it is template-only and comes in
via the InterfacesTemplates.cpp amalgamation.
Also replace the non-UTF-8 degree signs in the framebuffer rotation comment and
correct the rfswitch alias cleanup comment.
* Trim comments
* Report setenv failure for the framebuffer rotation
* Strip the default PSK when licensed defaults are installed
* Only record rate-limited portnums from the phone
* Bound payload reads by the received size
* Include warm-tier signers in the identity update gate
* Fail the send when PKI encryption fails
* Require signatures on licensed unicasts
* Include warm-tier signers in the NodeInfo downgrade drop
* Clamp hop fields on UDP multicast ingress
* Address review comments on signing hardening
Condense the updateUser rationale to two lines and stop calling the
Balanced-mode drop a broadcast now that licensed unicasts reach it.
relayOpaquePacket() allocates a copy and returns Router::send(relay) == ERRNO_OK, discarding ERRNO_SHOULD_RELEASE. The interface returns that for NODENUM_BROADCAST_NO_LORA, so the copy is never freed and one pool slot leaks per frame.
The opaque path is reached for packets on a channel we have no key for, so no key or PSK is needed: a frame with an unknown channel hash, to=NODENUM_BROADCAST_NO_LORA, a nonzero id and hop_limit>0 leaks a slot, and roughly MAX_PACKETS of them exhaust the pool until reboot.
#11087 fixed this pattern in perhapsRebroadcast and the retransmission paths but did not cover relayOpaquePacket, which was added separately with the opaque relay path.
blockLen() rounds numBytes up to the AES block size, so 241..256 returns 256. Stored in a uint8_t that truncates to 0, giving a zero-length encBuf that Process() then writes numBytes bytes into, smashing the stack with attacker-controlled ciphertext.
encrypted.size is a 256-byte protobuf field and encryptPacket admits numBytes up to MAX_BLOCKSIZE, so sizes above the 239-byte LoRa frame limit arrive via the MQTT and UDP multicast ingress paths, which pass the packet to the router without clamping. Only the hardware AES path for keys of 16 bytes or less is affected, which includes the default channel.
allocAckNak returns nullptr when the packet pool is exhausted, but allocErrorResponse passed the result straight to setReplyTo, which dereferences it. Reachable unauthenticated: an ADMIN_APP packet on a known-key channel takes the NOT_AUTHORIZED path, so a flood that empties the pool crashes the node. MemoryDynamic::alloc no longer aborting on failure made this reachable on PSRAM, STM32WL and Portduino targets. Callers already treat a null reply as no response. Same fix for the two RemoteHardwareModule sites.
The native test job ran every test_* suite in a single platformio invocation,
so a failure in the growing suite set could land past the viewable log limit.
Build the test programs once, then run the suites grouped by area in sequential
invocations, each with its own JUnit report and collapsible log. The runs share
one build dir, so gcov coverage still accumulates and a single capture holds the
union. Areas are ordered regex rules with a catch-all, so a new suite always runs.
* Pin admin responses to the stored peer key and request id
noteOutgoingAdminRequest derived its PKC pin from p.public_key, which nothing
populates on the outgoing path, so keyValid was false for every client request
and the pin never engaged. The accepted-response predicate reduced to an
unauthenticated from plus variant and subtype.
Resolve the destination key from NodeDB the way perhapsEncode does, and pin it
only when the request would actually be PKC-encrypted. Extract that condition
from perhapsEncode as wouldEncryptWithPKC so both use one predicate. Also
record the request's packet id and require the response to echo it.
* Treat a zero request id as no pairing token
* Bound remote-initiated key verification sessions
Opening a session raises a 30 second banner and a client notification and
occupies the only verification slot, all before the peer has authenticated
anything, and nothing limited how often that could happen.
Adds an absolute session cap that incoming packets cannot refresh, a
cooldown between remote-initiated sessions measured from when the previous
one ended, and refreshes the idle deadline only when the protocol actually
advances rather than on any arriving packet.
The busy path now sets ignoreRequest so it no longer answers with a NAK.
Also replaces the getTime() - 60 timeout comparison, which underflowed
before the clock passed 60.
* Use elapsed-time comparison for the session timeout and condense comments
perhapsDecode fell back to the not-yet-verified key held during a key
verification handshake for any incoming PKI unicast. That key is supplied
by whoever opened the handshake and proves only that they hold it, not that
they are the node they claim to be, so until the session ended they could
send DMs on any port that decrypted and were marked pki_encrypted.
perhapsEncode already restricts the pending key to KEY_VERIFICATION_APP.
The receive path now applies the same rule.
The send_bell append writes bytes[size] and bytes[size+1] while the guard only checked size < DATA_PAYLOAD_LEN, overrunning the 233-byte payload array by one when size == DATA_PAYLOAD_LEN - 1. Guard on size + 1.
writeSecret is a setter, so calling it on the NETWORK_CONFIG get path was a no-op: the buffer
already holds the stored psk, never the sentinel. MQTT_CONFIG returned the broker password
verbatim.
Both get paths now return secretReserved when req.from != 0, and the matching set paths call
writeSecret so a read-modify-write round trip keeps the stored value.
* Null-check packet allocations in allocForSending and its callers
Sibling of 0ae44d701.
* Null-check allocDataProtobuf, allocAckNak and allocErrorResponse callers
Second tier of the same nullable contract.
* Keep telemetry sleep scheduling on allocation failure
Allocation failure now marks the telemetry invalid instead of returning
early, so power-saving SENSOR nodes still arm deep sleep.
setPassKey drew the session passkey outside cryptLock, unlike the signing
and key verification paths. Also replaces random() for the key verification
nonce with the hardware RNG.
splitConfiguredMessages capped the split loop at
CANNED_MESSAGE_MODULE_MESSAGE_MAX_COUNT and then appended [Exit]
unconditionally, so messages[] could be written one past its last index
and messagesCount could exceed the array size.
Removed:
- MessageStore::addFromPacket and addFromString, superseded by
tryAddFromPacket
- GeoCoord rangeRadiansToMeters, distanceTo, bearingTo
- Router::rawSend, declared virtual with no override and no caller
- ContentHandler handleHotspot, handleFs, handleAdminSettings,
handleAdminSettingsApply, handleDeleteFsContent and their commented
route registrations, plus the now unreachable htmlDeleteDir and the
handleUpdateFs declaration that had no definition
- ContentHelper replaceAll
- OnScreenKeyboardModule popup chain: showPopup, clearPopup, drawPopup,
drawPopupOverlay and their state, unreachable since the frame based UI
was replaced by baseUI
- DebugRenderer drawDebugInfoTrampoline, drawDebugInfoSettingsTrampoline
and the orphaned drawFrameSettings
- NodeListRenderer calculateMaxScroll, drawColumns and a stale extern
haveGlyphs declaration with no definition
- UIRenderer::haveGlyphs, Screen::blink,
NotificationRenderer::showKeyboardMessagePopupWithTitle,
VirtualKeyboard::getInputText
- InkHUD touchNavLeft, touchNavRight, Applet::getActiveNodeCount,
ThreadedMessageApplet::saveMessagesToFlash
- TwoButton::setHandlerUp, TwoButtonExtended setHandlerUp,
setJoystickDownHandlers, setJoystickUpHandlers
- CannedMessageModule LaunchRepeatDestination, isCharInputAllowed,
hasMessages
- TrafficManagementModule resetStats, recordRouterHopPreserved,
saturatingIncrement
- UnitConversions::MetersPerSecondToMilesPerHour
- EncryptedStorage getSessionRemainingSeconds
- BMI270Sensor::writeRegisters, GPS::hasFlow, FSCommon copyFile,
SerialConsole consolePrintf, buzz playLongPressLeadUp,
memGet displayPercentHeapFree
* Use hardware RNG for session passkey and PKC extra nonce
The admin session passkey and the Curve25519 extra nonce were drawn
from Arduino random(), which is not a CSPRNG. Source them from
HardwareRNG::fill, mirroring the signing path, and fall back to the
seeded CSPRNG (CryptRNG) only when no hardware source is available.
* AdminModule: make session passkey expiry rollover-safe
session_time was compared as millis()/1000 seconds with additive
thresholds, which breaks across the millis() wrap and could keep a stale
admin session key valid. Store session_time in millis() and use
Throttle::isWithinTimespanMs for the 150s refresh and 300s validity
windows.
* AdminModule: track session passkey validity with an explicit flag
session_time == 0 was used as the uninitialized sentinel, but millis()
is legitimately 0 in the first millisecond of uptime, so a passkey
issued then would be treated as no session. Use a dedicated
session_passkey_valid flag instead.
* AdminModule: camelCase the session passkey validity flag
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* TrafficManagement: gate role/NodeInfo cache writes on signer authenticity
The tier-3 role cache and the PSRAM NodeInfo response cache were updated
from any received NodeInfo with no authenticity check, so a spoofed
NodeInfo could set a node's cached role (granting dedup exceptions) or
poison the cached user served in direct responses. Skip both cache
writes when a known signer's NodeInfo arrives unsigned, matching the
identity-update gate on the direct-response path.
* TrafficManagement: hoist shared NodeInfo signer lookup
Compute the sender node lookup and unauthenticated-signer check once per
NodeInfo packet and reuse it for both the cache-refresh gate and the
direct-response identity gate, avoiding a second O(N) getMeshNode scan.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
decryptForHash accepted chIndex == getNumChannels() before reading
getHash(chIndex), which indexes one past hashes[MAX_NUM_CHANNELS].
Use >= so an out-of-range index is rejected before the array read.
* AdminModule: only accept admin responses to requests we sent
An admin *_response short-circuited the auth and session-passkey checks that gate
every other admin message, so any node could deliver one. On a channel the module
listens to unauthenticated, a get_module_config_response drives the remote-hardware
pin handler with attacker-supplied values.
Track the destination of outgoing admin requests (per remote, with the pinned PKC
key when there is one) and accept a response only from a node with a matching
outstanding request, inside the same window as the session passkey. Local (from == 0)
admin is unchanged; PhoneAPI already gates it.
Also fix the response dispatch: get_module_config_response.which_payload_variant is a
ModuleConfig oneof tag, but it was compared against the AdminMessage ModuleConfigType
enum (different numbering), so the handler never ran. Compare against the oneof tag.
* AdminModule: rollover-safe request window, bind response to request type
Two review refinements to the request/response pairing:
Use Throttle::isWithinTimespanMs for the outstanding-request expiry instead of
comparing millis()/1000 sums, which mis-expired across the millis() rollover.
Bind each accepted response to a request type actually sent to that node. Each
outstanding record now carries a bitmask of the response variants its requests
authorize, so a get_owner request no longer admits a get_module_config response.
The mask accumulates per remote, so a client may still pipeline several request
types to one node and have every answer accepted.
* AdminModule: track admin requests per-request, not per-node
Reworks the outstanding-request table so each request is its own entry with its own
expiry window and pinned key, replacing the per-node bitmask that shared one timestamp
and one key across every response variant.
That sharing let a later request to the same node extend an earlier one's window and,
worse, clear its PKC pin: an unpinned request cleared keyValid, so a plaintext response
to an earlier PKC-pinned request was then accepted. Per-request entries keep each pin
intact. Identical requests are de-duplicated (a client may fetch several config subtypes,
all answered by one response variant) and eviction compares elapsed time, which is
rollover-safe.
Test: a pinned request's response still requires its key after an unpinned request to the
same node.
* AdminModule: match module-config subtype and consume answered requests
Two refinements to the request/response pairing:
Only remote_hardware get_module_config_response mutates state (the pin table), so it
must answer a request for that exact ModuleConfigType, not just any module-config
request. Each entry records the requested subtype and the gate checks it.
A matched request is now consumed on accept, so a node cannot replay a state-mutating
response within the window. Because one request yields one response, request de-dup is
dropped (a client's N indexed get_channel requests are N entries, each consumed once).
Tests: a non-remote-hardware request does not admit a remote_hardware response, and a
second copy of an answered response is rejected.
The SOH/STX control frame carries a client-supplied filename that was passed
straight to FSCom open/remove/exists, so a ".." component could write, read, or
delete outside the filesystem root. On embedded LittleFS this is largely inert
(no parent of the partition root); on the Portduino daemon FSCom is the host
filesystem under a mountpoint, so it is a real arbitrary-path write/read/delete.
Validate the filename before any FS access: reject empty and any ".." path
component, and NAK the transfer. Absolute and subdirectory paths are still
accepted - the file manager transfers them from the manifest and PortduinoFS
confines them to its mountpoint - so only traversal out of the root is blocked.
Reachable only from a local client connection (PhoneAPI: BLE/USB/serial/TCP),
not over the RF mesh; on the daemon the TCP API makes it network-reachable.
native-suite-count goes to 34: +1 for the new test_xmodem suite and +1 correcting
a pre-existing miscount (it read 32 for 33 suite directories).
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* PhoneAPI: gate local admin on the connection, not the wire from
The lockdown admin check in handleToRadioPacket only ran when p.from == 0. from is
a client-supplied wire field, and MeshService::handleToRadio rewrites it to 0 before
AdminModule sees the packet. A client could therefore set from != 0 to skip the
!getAdminAuthorized() drop, then have the packet normalized back to a local-admin
identity and executed - unauthorized admin from an unauthorized connection.
Every packet in handleToRadioPacket already comes from the local connection, so
locality is a property of the connection, not of from. Move the decision into
classifyLocalAdminPacket(), which ignores from and keys only on the admin variant and
the connection's authorization: lockdown_auth is delivered inline, any other admin
from an unauthorized connection is dropped, authorized admin passes through.
The classifier is compiled unconditionally and unit-tested; the guarded caller (built
only in the nRF52 lockdown config) calls it. Test: an unauthorized connection's
ADMIN_APP packet with from != 0 is classified DropUnauthorized.
* PhoneAPI: wipe the encoded lockdown passphrase, shorten comments
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
decoded.payload.bytes is a 233-byte protobuf field that is not NUL-terminated.
Printing it with a plain "%s" reads until a NUL, which for a full-length payload
with no NUL runs past the field. Use "%.*s" with payload.size, matching the write
form already used a few lines up in SerialModule.
Live sites: RangeTestModule appendFile, SerialModule text output. The same fix is
applied to the commented-out debug lines in RangeTestModule and Router so the
pattern is consistent if they are re-enabled.
* AudioModule: validate codec2 header and bound the RX decode reads
Two issues reachable from a crafted AUDIO_APP payload:
The RX path built a temp codec2 from rx_encode_frame[3] whenever the frame header
did not match ours. codec2_create returns NULL for an invalid mode byte, and the
next call dereferenced it. Only decode frames that carry our own header (magic +
mode) and drop the rest, so the untrusted mode byte never reaches codec2_create.
The decode loop advanced by the frame size while testing only i < rx_encode_frame_index,
so a payload length that was not a multiple of the frame size read past the received
data and could read past rx_encode_frame. Bound each read to i + frameSize <= the
received length clamped to the buffer, and clamp the receive memcpy to the buffer.
Behavior change: audio frames whose codec2 mode differs from this node's configured
mode are dropped instead of decoded with a temporary codec.
* AudioModule: pass byte count (not sample count) to i2s_write
* AudioModule: fix the mirror sample/byte bug on the i2s_read capture path
A SECURITY_CONFIG get_config response copied config.security verbatim, so a remote
request was answered with the device identity private_key and sent over the air.
Only the local owner needs it, for backup.
Zero private_key in the SECURITY_CONFIG response when the request is remote
(from != 0); the local BLE/USB/TCP path (from == 0) still receives it. public_key
and admin_key are public and stay as they were.
${platformio.packages_dir} resolves to a backslash path on Windows.
PlatformIO parses build_flags with POSIX shell rules, which strip the
backslashes and turn the NimBLE include paths into broken relative
paths (d:platformiopackages/...), failing the build with
'host/ble_gap.h: No such file or directory'. Quoting the flags
preserves backslashes through parsing.
* Fix SENSOR power saving deep sleep behavior
Deep sleep could be entered while a telemetry packet was still queued
or on air, truncating the transmission. canSleep() gained a deepSleep
parameter and now vetoes in that case; light sleep is unchanged.
Telemetry modules defer a pending deep sleep (bounded to 30s) until the
radio is idle and no longer let the sensor polling interval override
the 5s pre-sleep grace period. A failed sensor read still arms deep
sleep instead of leaving the node awake for a full telemetry interval.
Fixes#10890Fixes#10932
* Deduplicate telemetry deep sleep deferral logic
Move the radio-busy deferral and its counter into BaseTelemetryModule
and add an isPowerSavingSensor() helper. Removes the telemetry-specific
counter from OSThread. The sleep arming block stays per module because
it needs protected OSThread members not visible to the base class.
* size gate: emit flash_bytes from ELF for targets without a packaged .bin
nRF52 builds package hex/uf2/DFU zip but no raw .bin, so collect_sizes.py
dropped budgeted envs like rak4631 entirely and the size-budget-gate failed
closed. Emit ELF text+data as flash_bytes in the manifest and use it as the
fallback flash measurement.
* Factor shared size-tool invocation into run_size_tool helper
ScanI2CTwoWire is compiled out on builds that define
MESHTASTIC_EXCLUDE_I2C (e.g. native-wasm/portduino), while the
AirQuality module still builds there. Skip the re-scan when I2C is
excluded; there is nothing to scan.
* Seeed Tracker X1 Support
* silence CPPCheck
* fix macro order regression and adapt stm32hal for new radiolib
* STM32 is a radiolib upstream fix ( https://github.com/jgromes/RadioLib/issues/1825 )
* fix STM32 regression
* Seeed Tracker X1 Support
* silence CPPCheck
* fix macro order regression and adapt stm32hal for new radiolib
* STM32 is a radiolib upstream fix ( https://github.com/jgromes/RadioLib/issues/1825 )
* fix STM32 regression
* address copilot OCD
* Split behavior only when the two LEDs are on distinct pins.
* bring naming in line with the other seeed devices
* update env name to fit convention too
* guarantee evaluation order
* Guard sensor readings against null values, make sensor use less power
* Document that src/mesh/generated is auto-generated and must not be edited
* Fix esp32s2 build by enabling native USB CDC, add S2 to check matrix (#10799)
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* rename variant and add guard macros
* older G3 operational. M7 next.
* Split out G3 and M7 to different variants. Completely new PCB design. The G3 stays on 'PRIVATE_HW'
* Define button behaviour and use all of the device flash
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* ThinkNode G3, ETH support WIP
* rename variant and add guard macros
* older G3 operational. M7 next.
* Split out G3 and M7 to different variants. Completely new PCB design. The G3 stays on 'PRIVATE_HW'
* Define button behaviour and use all of the device flash
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Cardputer Kit
BMI270 WIP
* BMI270 support
* verify that the number of bytes read matches the requested length
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* trunk'd
* remove excessive logging
* Kick the screen when unsleeping
* Update the st7789 library, and enable displayon and displayoff
* Battery detection
* Default to arrow keys and enter, while in menus.
* Enable Backlight control
* Update src/detect/ScanI2CTwoWire.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* updateState method now accepts shouldRequestFocus parameter for better maintainability
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* BSEC2 Replacement
- add approximation for IAQ to non-BSEC2 platforms.
- Re-add this sensor to ESP32 targets, and refactor env_extra includes.
- Fix C++ 11 compatibility
* Check for gas resistance 0
Thomas Göttgens