Move pb string length method and fix linker error

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

.clusterfuzzlite/Dockerfile

@@ -20,7 +20,7 @@ ENV PIP_ROOT_USER_ACTION=ignore
 RUN apt-get update && apt-get install --no-install-recommends -y \
         cmake git zip libgpiod-dev libbluetooth-dev libi2c-dev \
         libunistring-dev libmicrohttpd-dev libgnutls28-dev libgcrypt20-dev \
-        libusb-1.0-0-dev libssl-dev pkg-config libsqlite3-dev libsdl2-dev && \
+        libusb-1.0-0-dev libssl-dev pkg-config libsqlite3-dev && \
     apt-get clean && rm -rf /var/lib/apt/lists/* && \
     pip install --no-cache-dir -U \
         platformio==6.1.16 \

.github/actions/build-variant/action.yml

@@ -100,7 +100,7 @@ runs:
       id: version
 
     - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v7
+      uses: actions/upload-artifact@v6
       with:
         name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}
         overwrite: true

.github/actions/setup-base/action.yml

@@ -8,6 +8,8 @@ runs:
       uses: actions/checkout@v6
       with:
         submodules: recursive
+        ref: ${{github.event.pull_request.head.ref}}
+        repository: ${{github.event.pull_request.head.repo.full_name}}
 
     - name: Install dependencies
       shell: bash

.github/pull_request_template.md

@@ -4,16 +4,16 @@
 
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
   to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
-  is appreciated." This will allow other devs to potentially save you time by not accidentally duplicating work etc...
+  is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
-- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the Linux version),
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the linux version),
   because it automatically follows our indentation rules and its auto reformatting will not cause spurious changes to lines.
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
 - Please also enable "Allow edits by maintainers".
 - Please do not submit untested code.
-- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and community members can help test your changes.
+- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and commnunity members can help test your changes.
 - If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord
 
 ## 🤝 Attestations

.github/workflows/build_debian_src.yml

@@ -16,7 +16,8 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
+  packages: write
 
 jobs:
   build-debian-src:
@@ -27,6 +28,8 @@ jobs:
         with:
           submodules: recursive
           path: meshtasticd
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Install deps
         shell: bash
@@ -39,8 +42,7 @@ jobs:
           sudo mk-build-deps --install --remove --tool='apt-get -o Debug::pkgProblemResolver=yes --no-install-recommends --yes' debian/control
 
       - name: Import GPG key
-        if: github.event_name != 'pull_request' && github.event_name != 'pull_request_target'
-        uses: crazy-max/ghaction-import-gpg@v7
+        uses: crazy-max/ghaction-import-gpg@v6
         with:
           gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
         id: gpg
@@ -58,11 +60,11 @@ jobs:
         run: debian/ci_pack_sdeb.sh
         env:
           SERIES: ${{ inputs.series }}
-          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid || '' }}
+          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid }}
           PKG_VERSION: ${{ steps.version.outputs.deb }}
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           overwrite: true

.github/workflows/build_firmware.yml

@@ -26,6 +26,8 @@ jobs:
       - uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Build ${{ inputs.platform }}
         id: build
@@ -109,7 +111,7 @@ jobs:
           echo "</details>" >> $GITHUB_STEP_SUMMARY
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         id: upload-firmware
         with:
           name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
@@ -125,7 +127,7 @@ jobs:
             release/device-*.bat
 
       - name: Store manifests as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         id: upload-manifest
         with:
           name: manifest-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}

.github/workflows/build_one_target.yml

@@ -87,7 +87,7 @@ jobs:
 
   gather-artifacts:
     permissions:
-      contents: read
+      contents: write
       pull-requests: write
     runs-on: ubuntu-latest
     needs: [version, build]
@@ -98,7 +98,7 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
         with:
           path: ./
           pattern: firmware-*-*
@@ -111,7 +111,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         with:
           name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -127,7 +127,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
         with:
           pattern: firmware-*-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -146,7 +146,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         with:
           name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
           overwrite: true

.github/workflows/daily_packaging.yml

@@ -16,7 +16,7 @@ on:
       - .github/workflows/hook_copr.yml
 
 permissions:
-  contents: read
+  contents: write
   packages: write
 
 jobs:
@@ -35,8 +35,8 @@ jobs:
         series:
           - jammy # 22.04 LTS
           - noble # 24.04 LTS
+          - plucky # 25.04
           - questing # 25.10
-          - resolute # 26.04 LTS
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: ppa:meshtastic/daily

.github/workflows/docker_build.yml

@@ -37,7 +37,7 @@ on:
         value: ${{ jobs.docker-build.outputs.digest }}
 
 permissions:
-  contents: read
+  contents: write
   packages: write
 
 jobs:
@@ -50,6 +50,8 @@ jobs:
         uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Get release version string
         run: |
@@ -58,16 +60,16 @@ jobs:
 
       - name: Docker login
         if: ${{ inputs.push }}
-        uses: docker/login-action@v4
+        uses: docker/login-action@v3
         with:
           username: meshtastic
           password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
 
       - name: Set up QEMU
-        uses: docker/setup-qemu-action@v4
+        uses: docker/setup-qemu-action@v3
 
       - name: Docker setup
-        uses: docker/setup-buildx-action@v4
+        uses: docker/setup-buildx-action@v3
 
       - name: Sanitize platform string
         id: sanitize_platform
@@ -76,7 +78,7 @@ jobs:
 
       - name: Docker tag
         id: meta
-        uses: docker/metadata-action@v6
+        uses: docker/metadata-action@v5
         with:
           images: meshtastic/meshtasticd
           tags: |
@@ -84,7 +86,7 @@ jobs:
           flavor: latest=false
 
       - name: Docker build and push
-        uses: docker/build-push-action@v7
+        uses: docker/build-push-action@v6
         id: docker_variant
         with:
           context: .

.github/workflows/docker_manifest.yml

@@ -12,7 +12,7 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
   packages: write
 
 jobs:
@@ -86,6 +86,8 @@ jobs:
         uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Get release version string
         run: |
@@ -137,14 +139,14 @@ jobs:
         id: tags
 
       - name: Docker login
-        uses: docker/login-action@v4
+        uses: docker/login-action@v3
         with:
           username: meshtastic
           password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
 
       - name: Docker meta (Debian)
         id: meta_debian
-        uses: docker/metadata-action@v6
+        uses: docker/metadata-action@v5
         with:
           images: meshtastic/meshtasticd
           tags: |
@@ -165,7 +167,7 @@ jobs:
 
       - name: Docker meta (Alpine)
         id: meta_alpine
-        uses: docker/metadata-action@v6
+        uses: docker/metadata-action@v5
         with:
           images: meshtastic/meshtasticd
           tags: |

.github/workflows/hook_copr.yml

@@ -11,7 +11,8 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
+  packages: write
 
 jobs:
   build-copr-hook:
@@ -21,6 +22,8 @@ jobs:
         uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{ github.ref }}
+          repository: ${{ github.repository }}
 
       - name: Trigger COPR build
         uses: vidplace7/copr-build@main

.github/workflows/main_matrix.yml

@@ -15,7 +15,8 @@ on:
       - "**.md"
       - version.properties
 
-  pull_request:
+  # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
+  pull_request_target:
     branches:
       - master
       - develop
@@ -28,8 +29,6 @@ on:
 
   workflow_dispatch:
 
-permissions: read-all
-
 jobs:
   setup:
     strategy:
@@ -89,6 +88,8 @@ jobs:
       - uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
       - name: Check ${{ matrix.check.board }}
         uses: meshtastic/gh-action-firmware@main
         with:
@@ -125,16 +126,9 @@ jobs:
 
   test-native:
     if: ${{ !contains(github.ref_name, 'event/') && github.repository == 'meshtastic/firmware' }}
-    permissions: # Needed for dorny/test-reporter.
-      contents: read
-      actions: read
-      checks: write
     uses: ./.github/workflows/test_native.yml
 
   docker:
-    permissions: # Needed for pushing to GHCR.
-      contents: read
-      packages: write
     strategy:
       fail-fast: false
       matrix:
@@ -159,6 +153,9 @@ jobs:
   gather-artifacts:
     # trunk-ignore(checkov/CKV2_GHA_1)
     if: github.repository == 'meshtastic/firmware'
+    permissions:
+      contents: write
+      pull-requests: write
     strategy:
       fail-fast: false
       matrix:
@@ -176,8 +173,11 @@ jobs:
     steps:
       - name: Checkout code
         uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -187,7 +187,7 @@ jobs:
         run: ls -R
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -205,7 +205,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -224,13 +224,20 @@ jobs:
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
           path: ./*.elf
           retention-days: 30
 
+      - uses: scruplelesswizard/comment-artifact@main
+        if: ${{ github.event_name == 'pull_request' }}
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+
   shame:
     if: github.repository == 'meshtastic/firmware'
     continue-on-error: true
@@ -238,44 +245,42 @@ jobs:
     needs: [build]
     steps:
       - uses: actions/checkout@v6
-        if: github.event_name == 'pull_request'
+        if: github.event_name == 'pull_request_target'
         with:
           filter: blob:none # means we download all the git history but none of the commit (except ones with checkout like the head)
           fetch-depth: 0
       - name: Download the current manifests
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
         with:
           path: ./manifests-new/
           pattern: manifest-*
           merge-multiple: true
       - name: Upload combined manifests for later commit and global stats crunching.
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         id: upload-manifest
         with:
           name: manifests-${{ github.sha }}
           overwrite: true
           path: manifests-new/*.mt.json
       - name: Find the merge base
-        if: github.event_name == 'pull_request'
+        if: github.event_name == 'pull_request_target'
         run: echo "MERGE_BASE=$(git merge-base "origin/$base" "$head")" >> $GITHUB_ENV
         env:
           base: ${{ github.base_ref }}
           head: ${{ github.sha }}
       # Currently broken (for-loop through EVERY artifact -- rate limiting)
       # - name: Download the old manifests
-      #   if: github.event_name == 'pull_request'
+      #   if: github.event_name == 'pull_request_target'
       #   run: gh run download -R "$repo" --name "manifests-$merge_base" --dir manifest-old/
       #   env:
       #     GH_TOKEN: ${{ github.token }}
       #     merge_base: ${{ env.MERGE_BASE }}
       #     repo: ${{ github.repository }}
       # - name: Do scan and post comment
-      #   if: github.event_name == 'pull_request'
+      #   if: github.event_name == 'pull_request_target'
       #   run: python3 bin/shame.py ${{ github.event.pull_request.number }} manifests-old/ manifests-new/
 
   release-artifacts:
-    permissions: # Needed for 'gh release upload'.
-      contents: write
     runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     outputs:
@@ -319,14 +324,14 @@ jobs:
           body: ${{ steps.release_notes.outputs.notes }}
 
       - name: Download source deb
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -350,7 +355,7 @@ jobs:
           }' > firmware-${{ needs.version.outputs.long }}.json
 
       - name: Save Release manifest artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         with:
           name: manifest-${{ needs.version.outputs.long }}
           overwrite: true
@@ -367,8 +372,6 @@ jobs:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
   release-firmware:
-    permissions: # Needed for 'gh release upload'.
-      contents: write
     strategy:
       fail-fast: false
       matrix:
@@ -393,7 +396,7 @@ jobs:
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -410,7 +413,7 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -451,14 +454,14 @@ jobs:
           python-version: 3.x
 
       - name: Get firmware artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true
           path: ./publish
 
       - name: Get manifest artifact
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
         with:
           pattern: manifest-${{ needs.version.outputs.long }}
           path: ./publish

.github/workflows/merge_queue.yml

@@ -0,0 +1,371 @@
+name: Merge Queue
+# Not sure how concurrency works in merge_queue, removing for now.
+# concurrency:
+#   group: merge-queue-${{ github.head_ref || github.run_id }}
+#   cancel-in-progress: true
+on:
+  # Merge group is a special trigger that is used to trigger the workflow when a merge group is created.
+  merge_group:
+
+jobs:
+  setup:
+    strategy:
+      fail-fast: true
+      matrix:
+        arch:
+          - all
+          - check
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v6
+      - uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+          cache: pip
+      - run: pip install -U platformio
+      - name: Generate matrix
+        id: jsonStep
+        run: |
+          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
+          else  
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level pr)
+          fi
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
+          echo "${{matrix.arch}}=$TARGETS" >> $GITHUB_OUTPUT
+    outputs:
+      all: ${{ steps.jsonStep.outputs.all }}
+      check: ${{ steps.jsonStep.outputs.check }}
+
+  version:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v6
+      - name: Get release version string
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        id: version
+        env:
+          BUILD_LOCATION: local
+    outputs:
+      long: ${{ steps.version.outputs.long }}
+      deb: ${{ steps.version.outputs.deb }}
+
+  check:
+    needs: setup
+    strategy:
+      fail-fast: true
+      matrix:
+        check: ${{ fromJson(needs.setup.outputs.check) }}
+
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name != 'workflow_dispatch' }}
+    steps:
+      - uses: actions/checkout@v6
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+      - name: Check ${{ matrix.check.board }}
+        run: bin/check-all.sh ${{ matrix.check.board }}
+
+  build:
+    needs: [setup, version]
+    strategy:
+      matrix:
+        build: ${{ fromJson(needs.setup.outputs.all) }}
+    uses: ./.github/workflows/build_firmware.yml
+    with:
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.build.board }}
+      platform: ${{ matrix.build.platform }}
+
+  build-debian-src:
+    if: github.repository == 'meshtastic/firmware'
+    uses: ./.github/workflows/build_debian_src.yml
+    with:
+      series: UNRELEASED
+      build_location: local
+    secrets: inherit
+
+  package-pio-deps-native-tft:
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    uses: ./.github/workflows/package_pio_deps.yml
+    with:
+      pio_env: native-tft
+    secrets: inherit
+
+  test-native:
+    if: ${{ !contains(github.ref_name, 'event/') }}
+    uses: ./.github/workflows/test_native.yml
+
+  docker:
+    strategy:
+      fail-fast: false
+      matrix:
+        distro: [debian, alpine]
+        platform: [linux/amd64, linux/arm64, linux/arm/v7]
+        pio_env: [native, native-tft]
+        exclude:
+          - distro: alpine
+            platform: linux/arm/v7
+          - pio_env: native-tft
+            platform: linux/arm64
+          - pio_env: native-tft
+            platform: linux/arm/v7
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: ${{ matrix.distro }}
+      platform: ${{ matrix.platform }}
+      runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
+      pio_env: ${{ matrix.pio_env }}
+      push: false
+
+  gather-artifacts:
+    # trunk-ignore(checkov/CKV2_GHA_1)
+    permissions:
+      contents: write
+      pull-requests: write
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+    runs-on: ubuntu-latest
+    needs: [version, build]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - uses: actions/download-artifact@v7
+        with:
+          path: ./
+          pattern: firmware-${{matrix.arch}}-*
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Move files up
+        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+
+      - name: Repackage in single firmware zip
+        uses: actions/upload-artifact@v6
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          overwrite: true
+          path: |
+            ./firmware-*.bin
+            ./firmware-*.uf2
+            ./firmware-*.hex
+            ./firmware-*.zip
+            ./device-*.sh
+            ./device-*.bat
+            ./littlefs-*.bin
+            ./bleota*bin
+            ./Meshtastic_nRF52_factory_erase*.uf2
+          retention-days: 30
+
+      - uses: actions/download-artifact@v7
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-update.sh || true
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - name: Repackage in single elfs zip
+        uses: actions/upload-artifact@v6
+        with:
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          overwrite: true
+          path: ./*.elf
+          retention-days: 30
+
+      - uses: scruplelesswizard/comment-artifact@main
+        if: ${{ github.event_name == 'pull_request' }}
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+
+  release-artifacts:
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    outputs:
+      upload_url: ${{ steps.create_release.outputs.upload_url }}
+    needs:
+      - version
+      - gather-artifacts
+      - build-debian-src
+      - package-pio-deps-native-tft
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+
+      - name: Create release
+        uses: softprops/action-gh-release@v2
+        id: create_release
+        with:
+          draft: true
+          prerelease: true
+          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
+          tag_name: v${{ needs.version.outputs.long }}
+          body: |
+            Autogenerated by github action, developer should edit as required before publishing...
+
+      - name: Download source deb
+        uses: actions/download-artifact@v7
+        with:
+          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
+          merge-multiple: true
+          path: ./output/debian-src
+
+      - name: Download `native-tft` pio deps
+        uses: actions/download-artifact@v7
+        with:
+          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output/pio-deps-native-tft
+
+      - name: Zip Linux sources
+        working-directory: output
+        run: |
+          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
+          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
+
+      # For diagnostics
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Add Linux sources to GtiHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
+        run: |
+          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
+          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+  release-firmware:
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-artifacts, version]
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+
+      - uses: actions/download-artifact@v7
+        with:
+          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-update.sh || true
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - uses: actions/download-artifact@v7
+        with:
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./elfs
+
+      - name: Zip debug elfs
+        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
+
+      # For diagnostics
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Add bins and debug elfs to GitHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
+        run: |
+          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+  publish-firmware:
+    runs-on: ubuntu-24.04
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-firmware, version]
+    env:
+      targets: |-
+        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+
+      - uses: actions/download-artifact@v7
+        with:
+          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./publish
+
+      - name: Publish firmware to meshtastic.github.io
+        uses: peaceiris/actions-gh-pages@v4
+        env:
+          # On event/* branches, use the event name as the destination prefix
+          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
+        with:
+          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
+          external_repository: meshtastic/meshtastic.github.io
+          publish_branch: master
+          publish_dir: ./publish
+          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
+          keep_files: true
+          user_name: github-actions[bot]
+          user_email: github-actions[bot]@users.noreply.github.com
+          commit_message: ${{ needs.version.outputs.long }}
+          enable_jekyll: true

.github/workflows/package_obs.yml

@@ -18,7 +18,8 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
+  packages: write
 
 jobs:
   build-debian-src:
@@ -57,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -16,7 +16,8 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
+  packages: write
 
 jobs:
   pkg-pio-libdeps:
@@ -26,6 +27,8 @@ jobs:
         uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -51,19 +54,9 @@ jobs:
           PLATFORMIO_LIBDEPS_DIR: pio/libdeps
           PLATFORMIO_PACKAGES_DIR: pio/packages
           PLATFORMIO_CORE_DIR: pio/core
-          PLATFORMIO_SETTING_ENABLE_TELEMETRY: 0
-          PLATFORMIO_SETTING_CHECK_PLATFORMIO_INTERVAL: 3650
-          PLATFORMIO_SETTING_CHECK_PRUNE_SYSTEM_THRESHOLD: 10240
-
-      - name: Mangle platformio cache
-        # Add "1" to epoch-timestamps of all downloads in the cache.
-        # This is a hack to prevent internet access at build-time.
-        run: |
-          cp pio/core/.cache/downloads/usage.db pio/core/.cache/downloads/usage.db.bak
-          jq -c 'with_entries(.value |= (. | tostring + "1" | tonumber))' pio/core/.cache/downloads/usage.db.bak > pio/core/.cache/downloads/usage.db
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         with:
           name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
           overwrite: true

.github/workflows/package_ppa.yml

@@ -16,7 +16,8 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
+  packages: write
 
 jobs:
   build-debian-src:
@@ -35,6 +36,8 @@ jobs:
         with:
           submodules: recursive
           path: meshtasticd
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Install deps
         shell: bash
@@ -43,7 +46,7 @@ jobs:
           sudo apt-get install -y dput
 
       - name: Import GPG key
-        uses: crazy-max/ghaction-import-gpg@v7
+        uses: crazy-max/ghaction-import-gpg@v6
         with:
           gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
         id: gpg
@@ -57,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/pr_tests.yml

@@ -50,7 +50,7 @@ jobs:
 
       - name: Download test artifacts
         if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}
           merge-multiple: true

.github/workflows/release_channels.yml

@@ -23,8 +23,8 @@ jobs:
         series:
           - jammy # 22.04 LTS
           - noble # 24.04 LTS
+          - plucky # 25.04
           - questing # 25.10
-          - resolute # 26.04 LTS
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: |-

.github/workflows/sec_sast_semgrep_cron.yml

@@ -33,7 +33,7 @@ jobs:
 
       # step 3
       - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         with:
           name: report.sarif
           overwrite: true

.github/workflows/stale_bot.yml

@@ -17,7 +17,7 @@ jobs:
 
     steps:
       - name: Stale PR+Issues
-        uses: actions/stale@v10.2.0
+        uses: actions/stale@v10.1.1
         with:
           days-before-stale: 45
           stale-issue-message: This issue has not had any comment or update in the last month. If it is still relevant, please post update comments. If no comments are made, this issue will be closed automagically in 7 days.

.github/workflows/test_native.yml

@@ -16,6 +16,8 @@ jobs:
     steps:
       - uses: actions/checkout@v6
         with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
           submodules: recursive
 
       - name: Setup native build
@@ -57,7 +59,7 @@ jobs:
         id: version
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}
@@ -70,6 +72,8 @@ jobs:
     steps:
       - uses: actions/checkout@v6
         with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
           submodules: recursive
 
       - name: Setup native build
@@ -90,7 +94,7 @@ jobs:
 
       - name: Save test results
         if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}
           overwrite: true
@@ -104,7 +108,7 @@ jobs:
           sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}
@@ -124,26 +128,29 @@ jobs:
     if: always()
     steps:
       - uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Get release version string
         run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v3.0.0
+        uses: dorny/test-reporter@v2.5.0
         with:
           name: PlatformIO Tests
           path: testreport.xml
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
         with:
           pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}
           path: code-coverage-report
@@ -156,7 +163,7 @@ jobs:
           genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report
 
       - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         with:
           name: code-coverage-report-${{ steps.version.outputs.long }}
           path: code-coverage-report

.github/workflows/tests.yml

@@ -52,7 +52,7 @@ jobs:
           node-version: 24
 
       - name: Setup pnpm
-        uses: pnpm/action-setup@v5
+        uses: pnpm/action-setup@v4
         with:
           version: latest
 

.github/workflows/update_protobufs.yml

@@ -6,7 +6,7 @@ permissions: read-all
 jobs:
   update-protobufs:
     runs-on: ubuntu-latest
-    permissions: # Needed for peter-evans/create-pull-request.
+    permissions:
       contents: write
       pull-requests: write
     steps:

.gitignore

@@ -33,7 +33,6 @@ __pycache__
 *~
 
 venv/
-.venv/
 release/
 .vscode/extensions.json
 /compile_commands.json

.trunk/trunk.yaml

@@ -4,31 +4,31 @@ cli:
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.6
+      ref: v1.7.4
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.511
-    - renovate@43.92.1
+    - checkov@3.2.500
+    - renovate@43.4.0
     - prettier@3.8.1
-    - trufflehog@3.94.1
+    - trufflehog@3.93.0
     - yamllint@1.38.0
-    - bandit@1.9.4
-    - trivy@0.69.3
+    - bandit@1.9.3
+    - trivy@0.69.1
     - taplo@0.10.0
-    - ruff@0.15.8
-    - isort@8.0.1
-    - markdownlint@0.48.0
+    - ruff@0.15.0
+    - isort@7.0.0
+    - markdownlint@0.47.0
     - oxipng@10.1.0
-    - svgo@4.0.1
-    - actionlint@1.7.11
+    - svgo@4.0.0
+    - actionlint@1.7.10
     - flake8@7.3.0
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@26.3.1
+    - black@26.1.0
     - git-diff-check
-    - gitleaks@8.30.1
+    - gitleaks@8.30.0
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

Dockerfile

@@ -14,7 +14,7 @@ RUN apt-get update && apt-get install --no-install-recommends -y \
         curl wget g++ zip git ca-certificates pkg-config \
         libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
         libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
-        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev libsdl2-dev \
+        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware
@@ -53,7 +53,7 @@ USER root
 RUN apt-get update && apt-get --no-install-recommends -y install \
         libc-bin libc6 libgpiod3 libyaml-cpp0.8 libi2c0 libuv1t64 libusb-1.0-0-dev \
         liborcania2.3 libulfius2.7t64 libssl3t64 \
-        libx11-6 libinput10 libxkbcommon-x11-0 libsdl2-2.0-0 \
+        libx11-6 libinput10 libxkbcommon-x11-0 \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \

Dockerfile.test

@@ -1,26 +0,0 @@
-# Lightweight container for running native PlatformIO tests on non-Linux hosts
-FROM python:3.14-slim-trixie
-
-ENV DEBIAN_FRONTEND=noninteractive
-ENV PIP_ROOT_USER_ACTION=ignore
-
-# hadolint ignore=DL3008
-RUN apt-get update && apt-get install --no-install-recommends -y \
-        g++ git ca-certificates pkg-config \
-        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
-        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
-        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev libsdl2-dev \
-    && apt-get clean && rm -rf /var/lib/apt/lists/* \
-    && pip install --no-cache-dir platformio==6.1.19 \
-        && useradd --create-home --shell /usr/sbin/nologin meshtastic
-
-WORKDIR /firmware
-RUN chown -R meshtastic:meshtastic /firmware
-
-HEALTHCHECK --interval=30s --timeout=5s --start-period=10s --retries=3 \
-    CMD platformio --version || exit 1
-
-USER meshtastic
-
-# Run tests by default; override with docker run args for specific filters
-CMD ["platformio", "test", "-e", "coverage", "-v"]

alpine.Dockerfile

@@ -11,7 +11,7 @@ RUN apk --no-cache add \
         bash g++ libstdc++-dev linux-headers zip git ca-certificates libbsd-dev \
         libgpiod-dev yaml-cpp-dev bluez-dev \
         libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
-        libx11-dev libinput-dev libxkbcommon-dev sqlite-dev sdl2-dev \
+        libx11-dev libinput-dev libxkbcommon-dev sqlite-dev \
     && rm -rf /var/cache/apk/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware
@@ -42,7 +42,7 @@ USER root
 
 RUN apk --no-cache add \
         shadow libstdc++ libbsd libgpiod yaml-cpp libusb \
-        i2c-tools libuv libx11 libinput libxkbcommon sdl2 \
+        i2c-tools libuv libx11 libinput libxkbcommon \
     && rm -rf /var/cache/apk/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \

bin/check-all.sh

@@ -23,4 +23,4 @@ for BOARD in $BOARDS; do
 	CHECK="${CHECK} -e ${BOARD}"
 done
 
-pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=low --fail-on-defect=medium --fail-on-defect=high
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high

bin/config-dist.yaml

@@ -187,7 +187,6 @@ Logging:
   LogLevel: info # debug, info, warn, error
 #  TraceFile: /var/log/meshtasticd.json
 #  JSONFile: /packets.json # File location for JSON output of decoded packets
-#  JSONFileRotate: 60 # Rotate JSON file every N minutes, or 0 for no rotation
 #  JSONFilter: position # filter for packets to save to JSON file
 #  AsciiLogs: true     # default if not specified is !isatty() on stdout
 
@@ -215,4 +214,3 @@ General:
   AvailableDirectory: /etc/meshtasticd/available.d/
 #  MACAddress: AA:BB:CC:DD:EE:FF
 #  MACAddressSource: eth0
-#  APIPort: 4403

bin/config.d/OpenWRT/BananaPi-BPI-R4-sx1262.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: BananaPi-BPI-R4-sx1262
-  support: community
-  compatible:
-    - bananapi_bpi-r4 # OpenWrt target
-
 Lora:
   Module: sx1262  # BananaPi-BPI-R4 SPI via 26p GPIO Header
 ##  CS: 28

bin/config.d/OpenWRT/OpenWRT-One-mikroBUS-LR-IOT-CLICK.yaml

@@ -1,10 +1,4 @@
 ##  https://www.mikroe.com/lr-iot-click
-Meta:
-  name: OpenWRT One mikroBUS LR-IOT-CLICK
-  support: community
-  compatible:
-    - openwrt_one # OpenWrt target
-
 Lora:
   Module: lr1110  # OpenWRT ONE mikroBUS with LR-IOT-CLICK
 #  CS: 25

bin/config.d/OpenWRT/OpenWRT_One_mikroBUS_sx1262.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: OpenWRT One mikroBUS sx1262
-  support: community
-  compatible:
-    - openwrt_one # OpenWrt target
-
 Lora:
   Module: sx1262
   IRQ: 10

bin/config.d/README.md

@@ -1,28 +0,0 @@
-# meshtasticd configuration files
-
-This directory contains YAML configuration files for meshtasticd. Each file describes a specific hardware configuration, including the LoRa module and pin assignments. These configurations are used by meshtasticd to correctly interface with the hardware.
-
-## Metadata structure
-
-Each configuration file includes a `Meta` section that provides information about the configuration.
-This configuration is consumed by configuration-selection tools.
-
-```yaml
-Meta:
-  name: MeshAdv-Pi E22-900M30S # A unique identifier for this configuration.
-  support: community # community, official, or deprecated; determined by Meshtastic Leads.
-  compatible: # A list of compatible products or platforms.
-    - raspberry-pi
-```
-`name`: A unique identifier for the configuration, typically reflecting the hardware it supports.
-
-`support`: Indicates the level of support for this configuration. It can be one of the following:
-
-- `community`: Supported by the Meshtastic community. Meshtastic Members may not possess, or have not tested this configuration.
-- `official`: Fully supported by Meshtastic. Meshtastic Members have tested and verified this configuration.
-- `deprecated`: No longer recommended for deployment by Meshtastic.
-
-`compatible`: A list of compatible products or platforms that can use this configuration.
-This will vary depending on the intended use case / platform.
-Multiple compatible entries can be included. E.g. Armbian `BOARD` value or OpenWrt `TARGET` value.
-These tags can be consumed by different configuration-selection tools, filtering based upon their platform/etc.

bin/config.d/display-waveshare-1-44.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Waveshare 1.44inch LCD HAT
-  support: community
-  compatible:
-    - raspberry-pi
-
 ### Waveshare 1.44inch LCD HAT
 Display:
   Panel: ST7735S

bin/config.d/display-waveshare-2.8.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Waveshare 2.8inch LCD HAT
-  support: community
-  compatible:
-    - raspberry-pi
-
 Display:
 
 ### Waveshare 2.8inch RPi LCD

bin/config.d/femtofox/femtofox_LR1121_TCXO.yaml

@@ -1,22 +1,20 @@
----
-Meta:
-  name: Femtofox Ebyte E80-900M22S with TCXO
-  support: community
-  compatible:
-    - luckfox-pico-mini # Armbian
-
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
+---
+Lora:
+## Ebyte E80-900M22S
+## This is a bit experimental
+## 
+##
+  Module: lr1121
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO3_TCXO_VOLTAGE: 1.8
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+
+
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+General:
+  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_SX1262_TCXO.yaml

@@ -1,24 +1,21 @@
----
-Meta:
-  name: Femtofox SX1262 TCXO
-  support: community
-  compatible:
-    - luckfox-pico-mini # Armbian
-
-Lora:
-## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
-## HT-RA62 (Has internal switching, but whatever)
-## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
-## Will work with any module with or without RF switching, and with TCXO
-  Module: sx1262
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
+---
+Lora:
+## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
+## HT-RA62 (Has internal switching, but whatever)
+## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
+## Will work with any module with or without RF switching, and with TCXO
+  Module: sx1262
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+#  TXen: bridge to DIO2 on E22 module
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+General:
+  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_SX1262_XTAL.yaml

@@ -1,24 +1,21 @@
----
-Meta:
-  name: Femtofox SX1262 XTAL
-  support: community
-  compatible:
-    - luckfox-pico-mini # Armbian
-
-Lora:
-## Ebyte E22-900MM22S with no external RF switching setup
-## Waveshare SX126X XXXM, AI Thinker RA-01SH
-## Will work with any module with or without RF switching and no TCXO
-
-  Module: sx1262  
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: false
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1 
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
+---
+Lora:
+## Ebyte E22-900MM22S with no external RF switching setup
+## Waveshare SX126X XXXM, AI Thinker RA-01SH
+## Will work with any module with or without RF switching and no TCXO
+
+  Module: sx1262  
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: false
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1 
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+#  TXen: bridge to DIO2 on E22 module
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+
+General:
+  MACAddressSource: eth0

bin/config.d/lora-Adafruit-RFM9x.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Adafruit RFM9x
-  support: deprecated
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: RF95  # Adafruit RFM9x
   Reset: 25

bin/config.d/lora-MeshAdv-900M30S.yaml

@@ -1,11 +1,5 @@
 # MeshAdv-Pi E22-900M30S
 # https://github.com/chrismyers2000/MeshAdv-Pi-Hat
-Meta:
-  name: MeshAdv-Pi E22-900M30S
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: sx1262
   CS: 21

bin/config.d/lora-MeshAdv-Mini-900M22S.yaml

@@ -1,11 +1,5 @@
 # MeshAdv Mini E22-900M22S
 # https://github.com/chrismyers2000/MeshAdv-Mini
-Meta:
-  name: MeshAdv Mini E22-900M22S
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: sx1262  # Ebyte E22-900M22S 
   CS: 8

bin/config.d/lora-RAK6421-13300-slot1.yaml

@@ -1,20 +1,11 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1
-  support: official
-  compatible:
-    - raspberry-pi
-
 Lora:
 
-  ### RAK13300 in Slot 1
+  ### RAK13300in Slot 1
   Module: sx1262
   IRQ: 22 #IO6
   Reset: 16 # IO4
   Busy: 24 # IO5
   # Ant_sw: 13 # IO3 
-  Enable_Pins:
-    - 12
-    - 13
   DIO3_TCXO_VOLTAGE: true
   DIO2_AS_RF_SWITCH: true
   spidev: spidev0.0

bin/config.d/lora-RAK6421-13300-slot2.yaml

@@ -1,17 +1,8 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 2
-  support: official
-  compatible:
-    - raspberry-pi
-
 Lora:
-  ### RAK13300 in Slot 2 pins
+  ### RAK13300in Slot 2 pins
   IRQ: 18 #IO6
   Reset: 24 # IO4
   Busy: 19 # IO5
   # Ant_sw: 23 # IO3 
-  Enable_Pins:
-    - 26
-    - 23
   spidev: spidev0.1
   # CS: 7

bin/config.d/lora-RAK6421-13302-slot1.yaml

@@ -1,22 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13302 Slot 1
-  support: official
-  compatible:
-    - raspberry-pi
-
-Lora:
-
-  ### RAK13302 in Slot 1
-  Module: sx1262
-  IRQ: 22 #IO6
-  Reset: 16 # IO4
-  Busy: 24 # IO5
-  # Ant_sw: 13 # IO3 
-  Enable_Pins:
-    - 12
-    - 13
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: 8
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-RAK6421-13302-slot2.yaml

@@ -1,18 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13302 Slot 2
-  support: official
-  compatible:
-    - raspberry-pi
-
-Lora:
-  ### RAK13302 in Slot 2 pins
-  IRQ: 18 #IO6
-  Reset: 24 # IO4
-  Busy: 19 # IO5
-  # Ant_sw: 23 # IO3 
-  Enable_Pins:
-    - 26
-    - 23
-  spidev: spidev0.1
-  # CS: 7
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-hat-rak-6421-pi-hat.yaml

@@ -1,21 +1,11 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1 (Autoconf default)
-  support: official
-  compatible:
-    - raspberry-pi
-
 Lora:
 
-  ### RAK13300 in Slot 1
+  ### RAK13300in Slot 1
   Module: sx1262
   IRQ: 22 #IO6
   Reset: 16 # IO4
   Busy: 24 # IO5
-  Enable_Pins:
-    - 12
-    - 13
+  # Ant_sw: 13 # IO3 
   DIO3_TCXO_VOLTAGE: true
   DIO2_AS_RF_SWITCH: true
   spidev: spidev0.0
-  # GPIO_DETECT_PA: 13
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-lyra-picocalc-wio-sx1262.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Luckfox Lyra PicoCalc Wio LoRa SX1262
-  support: official
-  compatible:
-    - luckfox-lyra-plus # Armbian
-
 Lora:
   Module: sx1262
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-lyra-ultra_1w.yaml

@@ -1,23 +0,0 @@
-# For use with Armbian luckfox-lyra-ultra-w
-# Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
-# https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
-# 1 Watt Lyra Ultra hat
-Meta:
-  name: wehooper4 Luckfox Ultra 1W
-  support: community
-  compatible:
-    - luckfox-pico-ultra # Armbian
-    - luckfox-lyra-ultra # Armbian
-
-Lora:
-  Module: sx1262
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  CS: 10
-  IRQ: 5
-  Busy: 11
-  Reset: 9
-  RXen: 14
-
-  spidev: spidev0.0 #pins are (CS=10, CLK=8, MOSI=6, MISO=7)
-  spiSpeed: 2000000

bin/config.d/lora-lyra-ultra_2w.yaml

@@ -1,24 +0,0 @@
-# For use with Armbian luckfox-lyra-ultra-w
-# Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
-# https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
-# 2 Watt Lyra Ultra hat
-Meta:
-  name: wehooper4 Luckfox Ultra 2W
-  support: community
-  compatible:
-    - luckfox-pico-ultra # Armbian
-    - luckfox-lyra-ultra # Armbian
-
-Lora:
-  Module: sx1262
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  SX126X_MAX_POWER: 8
-  CS: 10
-  IRQ: 5
-  Busy: 11
-  Reset: 9
-  RXen: 14
-
-  spidev: spidev0.0 #pins are (CS=10, CLK=8, MOSI=6, MISO=7)
-  spiSpeed: 2000000

bin/config.d/lora-lyra-ws-raspberry-pi-pico-hat.yaml

@@ -1,31 +0,0 @@
-# For use with Armbian luckfox-lyra // luckfox-lyra-plus
-# Enable overlay 'luckfox-lyra-plus-spi0-cs0_rmio13-spidev' with armbian-config
-# Waveshare LoRa HAT for Raspberry Pi Pico
-# https://www.waveshare.com/wiki/Pico-LoRa-SX1262
-Meta:
-  name: Waveshare LoRa HAT for Raspberry Pi Pico
-  support: community
-  compatible:
-    - luckfox-lyra-plus # Armbian
-
-Lora:
-  Module: sx1262
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  spidev: spidev0.0
-  CS: # GPIO0_B5
-    pin: 13
-    gpiochip: 0
-    line: 13
-  IRQ: # GPIO1_C2
-    pin: 50
-    gpiochip: 1
-    line: 18
-  Busy: # GPIO0_B4
-    pin: 12
-    gpiochip: 0
-    line: 12
-  Reset: # GPIO0_A2
-    pin: 2
-    gpiochip: 0
-    line: 2

bin/config.d/lora-meshstick-1262.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Lora Meshstick SX1262
-  support: official
-  compatible:
-    - usb
-
 Lora:
   Module: sx1262
   CS: 0

bin/config.d/lora-piggystick-lr1121.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Lora Meshstick SX1262
-  support: community
-  compatible:
-    - usb
-
 Lora:
   Module: lr1121
   CS: 0

bin/config.d/lora-pinedio-usb-sx1262.yaml

@@ -1,11 +1,5 @@
-Meta:
-  name: Pinedio USB SX1262
-  support: deprecated
-  compatible:
-    - usb
-
 Lora:
   Module: sx1262
   CS: 0 
   IRQ: 10
-  spidev: ch341
+  spidev: ch341

bin/config.d/lora-raxda-rock2f-starter-edition-hat.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: raxda-rock2f-starter-edition-hat
-  support: community
-  compatible:
-    - rock-2f # Armbian
-
 Lora:
 
 ### Raxda Rock 2F running Armbian Linux 6.1.99-vendor-rk35xx

bin/config.d/lora-starter-edition-sx1262-i2c.yaml

@@ -1,11 +1,5 @@
 # https://www.waveshare.com/core1262-868m.htm
 # https://github.com/markbirss/lora-starter-edition-sx1262-i2c
-Meta:
-  name: lora-starter-edition-sx1262-i2c
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: sx1262  # Starter Edition SX1262 I2C Raspberry Pi HAT
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-usb-meshstick-1262.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: meshstick-1262
-  support: official
-  compatible:
-    - usb
-
 Lora:
   Module: sx1262
   CS: 0

bin/config.d/lora-usb-meshtoad-e22.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: meshtoad-e22
-  support: official
-  compatible:
-    - usb
-
 Lora:
   Module: sx1262
   CS: 0

bin/config.d/lora-usb-umesh-1262-30dbm.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: umesh-1262-30dbm
-  support: community
-  compatible:
-    - clockwork-uconsole
-
 Lora:
   Module: sx1262
   CS: 0
@@ -19,7 +13,8 @@ Lora:
 #  USB_Serialnum: 12345678
   SX126X_MAX_POWER: 22
 # Reduce output power to improve EMI
-  TX_GAIN_LORA: [12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7]
+  NUM_PA_POINTS: 22
+  TX_GAIN_LORA: 12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7
 # Note: This module integrates an additional PA to achieve higher output power.
 # The 'power' parameter here does not represent the actual RF output.
 # TX_GAIN_LORA defines the gain offset applied at each SX1262 input power step (1–22 dBm).

bin/config.d/lora-usb-umesh-1268-30dbm.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: umesh-1268-30dbm
-  support: community
-  compatible:
-    - clockwork-uconsole
-
 Lora:
   Module: sx1268
   CS: 0
@@ -19,7 +13,8 @@ Lora:
 #  USB_Serialnum: 12345678
   SX126X_MAX_POWER: 22
 # Reduce output power to improve EMI
-  TX_GAIN_LORA: [12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7]
+  NUM_PA_POINTS: 22
+  TX_GAIN_LORA: 12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7
 # Note: This module integrates an additional PA to achieve higher output power.
 # The 'power' parameter here does not represent the actual RF output.
 # TX_GAIN_LORA defines the gain offset applied at each SX1262 input power step (1–22 dBm).

bin/config.d/lora-waveshare-sxxx.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Waveshare SX1262
-  support: deprecated
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: sx1262  # Waveshare SX126X XXXM
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-ws-raspberry-pi-pico-to-rpi-adapter.yaml

@@ -1,12 +1,5 @@
 # https://www.waveshare.com/pico-lora-sx1262-868m.htm
 # https://github.com/markbirss/lora-ws-raspberry-pi-pico-to-rpi-adapter
-
-Meta:
-  name: ws-raspberry-pico-to-rpi-adapter
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: sx1262  # Waveshare Raspberry Pi Pico to Raspberry Pi HAT Adapter
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-ws-raspberry-pico-to-orangepi-03.yaml

@@ -15,12 +15,6 @@
 #   5     CS          24
 #   26    DIO1/IRQ    26
 
-Meta:
-  name: ws-raspberry-pico-to-orangepi-03
-  support: community
-  compatible:
-    - orange-pi-zero-3 # Armbian
-
 Lora:
   Module: sx1262  # Waveshare Raspberry Pico Lora module
   DIO2_AS_RF_SWITCH: true

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,12 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.21" date="2026-03-11">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.21</url>
-    </release>
-    <release version="2.7.20" date="2026-02-11">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.20</url>
-    </release>
     <release version="2.7.19" date="2026-01-22">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.19</url>
     </release>

bin/test-native-docker.sh

@@ -1,44 +0,0 @@
-#!/usr/bin/env bash
-# Run native PlatformIO tests inside Docker (for macOS / non-Linux hosts).
-#
-# Usage:
-#   ./bin/test-native-docker.sh                          # run all native tests
-#   ./bin/test-native-docker.sh -f test_transmit_history  # run specific test filter
-#   ./bin/test-native-docker.sh --rebuild                 # force rebuild the image
-#
-set -euo pipefail
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
-ROOT_DIR="$(cd "$SCRIPT_DIR/.." && pwd)"
-IMAGE_NAME="meshtastic-native-test"
-
-REBUILD=false
-EXTRA_ARGS=()
-
-for arg in "$@"; do
-    if [[ "$arg" == "--rebuild" ]]; then
-        REBUILD=true
-    else
-        EXTRA_ARGS+=("$arg")
-    fi
-done
-
-if $REBUILD || ! docker image inspect "$IMAGE_NAME" >/dev/null 2>&1; then
-    echo "Building test image (first run may take a few minutes)..."
-    docker build -t "$IMAGE_NAME" -f "$ROOT_DIR/Dockerfile.test" "$ROOT_DIR"
-fi
-
-# Disable BUILD_EPOCH to avoid full rebuilds between test runs (matches CI)
-sed_cmd='s/-DBUILD_EPOCH=$UNIX_TIME/#-DBUILD_EPOCH=$UNIX_TIME/'
-
-# Default: run all tests. Pass extra args (e.g. -f test_transmit_history) through.
-if [[ ${#EXTRA_ARGS[@]} -eq 0 ]]; then
-    CMD=("platformio" "test" "-e" "coverage" "-v")
-else
-    CMD=("platformio" "test" "-e" "coverage" "-v" "${EXTRA_ARGS[@]}")
-fi
-
-exec docker run --rm \
-    -v "$ROOT_DIR:/src:ro" \
-    "$IMAGE_NAME" \
-    bash -c "rm -rf /tmp/fw-test && cp -a /src /tmp/fw-test && cd /tmp/fw-test && sed -i '${sed_cmd}' platformio.ini && ${CMD[*]}"

boards/heltec_mesh_node_t096.json

@@ -1,54 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x2886", "0x1667"]
-    ],
-    "usb_product": "HT-n5262G",
-    "mcu": "nrf52840",
-    "variant": "heltec_mesh_node_t096",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Heltec nrf (Adafruit BSP)",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://heltec.org/",
-  "vendor": "Heltec"
-}

boards/me25ls01-4y10td.json

@@ -32,8 +32,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
+    "svd_path": "nrf52840.svd"
   },
   "frameworks": ["arduino"],
   "name": "Minesemi ME25LS01",

boards/meshlink.json

@@ -33,8 +33,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
+    "svd_path": "nrf52840.svd"
   },
   "frameworks": ["arduino"],
   "name": "MeshLink",

boards/mini-epaper-s3.json

@@ -1,40 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "partitions": "default.csv"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_ESP32S3_DEV",
-      "-DARDUINO_USB_MODE=1",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "LilyGo Mini-Epaper-S3 (4 MB Flash, 2MB PSRAM)",
-  "upload": {
-    "flash_size": "4MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 4194304,
-    "require_upload_port": true,
-    "speed": 460800
-  },
-  "url": "https://www.lilygo.cc",
-  "vendor": "LilyGo"
-}

boards/minimesh_lite.json

@@ -31,8 +31,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
+    "svd_path": "nrf52840.svd"
   },
   "frameworks": ["arduino"],
   "name": "Minimesh Lite",

boards/ms24sf1.json

@@ -32,8 +32,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
+    "svd_path": "nrf52840.svd"
   },
   "frameworks": ["arduino"],
   "name": "MINEWSEMI_MS24SF1_SX1262",

boards/nano-g2-ultra.json

@@ -32,8 +32,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
+    "svd_path": "nrf52840.svd"
   },
   "frameworks": ["arduino"],
   "name": "BQ nRF52840",

boards/promicro-nrf52840.json

@@ -33,8 +33,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
+    "svd_path": "nrf52840.svd"
   },
   "frameworks": ["arduino"],
   "name": "ProMicro compatible nRF52840",

boards/station-g2.json

@@ -8,7 +8,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=0"
     ],

boards/t5-epaper-s3.json

@@ -1,38 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi",
-      "partitions": "default_16MB.csv"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=0",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "LilyGo T5-ePaper-S3",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 16777216,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://lilygo.cc/products/t5-e-paper-s3-pro",
-  "vendor": "LILYGO"
-}

boards/tracker-t1000-e.json

@@ -33,8 +33,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
+    "svd_path": "nrf52840.svd"
   },
   "frameworks": ["arduino"],
   "name": "Seeed T1000-E",

boards/wio-sdk-wm1110.json

@@ -25,8 +25,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
+    "svd_path": "nrf52840.svd"
   },
   "frameworks": ["arduino", "freertos"],
   "name": "Seeed WIO WM1110",

boards/wio-t1000-s.json

@@ -32,8 +32,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
+    "svd_path": "nrf52840.svd"
   },
   "frameworks": ["arduino"],
   "name": "Seeed WIO WM1110",

boards/wio-tracker-wm1110.json

@@ -32,8 +32,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
+    "svd_path": "nrf52840.svd"
   },
   "frameworks": ["arduino"],
   "name": "Seeed WIO WM1110",

branding/README.md

@@ -12,6 +12,6 @@ Ex:
 - `logo_320x480.png`
 - `logo_320x240.png`
 
-This file is copied to `data/boot/logo.png` before filesystem image compilation.
+This file is copied to `data/boot/logo.png` before filesytem image compilation.
 
 For additional examples see the [`event/defcon33` branch](https://github.com/meshtastic/firmware/tree/event/defcon33).

debian/changelog

@@ -1,15 +1,3 @@
-meshtasticd (2.7.21.0) unstable; urgency=medium
-
-  * Version 2.7.21
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Wed, 11 Mar 2026 11:45:36 +0000
-
-meshtasticd (2.7.20.0) unstable; urgency=medium
-
-  * Version 2.7.20
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Wed, 11 Feb 2026 12:19:54 +0000
-
 meshtasticd (2.7.19.0) unstable; urgency=medium
 
   * Version 2.7.19

debian/ci_pack_sdeb.sh

@@ -3,17 +3,10 @@ export DEBEMAIL="jbennett@incomsystems.biz"
 export PLATFORMIO_LIBDEPS_DIR=pio/libdeps
 export PLATFORMIO_PACKAGES_DIR=pio/packages
 export PLATFORMIO_CORE_DIR=pio/core
-export PLATFORMIO_SETTING_ENABLE_TELEMETRY=0
-export PLATFORMIO_SETTING_CHECK_PLATFORMIO_INTERVAL=3650
-export PLATFORMIO_SETTING_CHECK_PRUNE_SYSTEM_THRESHOLD=10240
 
 # Download libraries to `pio`
 platformio pkg install -e native-tft
 platformio pkg install -e native-tft -t platformio/tool-scons@4.40502.0
-# Mangle PlatformIO cache to prevent internet access at build-time
-# Simply adds 1 to all expiry (epoch) timestamps, adding ~500 years to expiry date
-cp pio/core/.cache/downloads/usage.db pio/core/.cache/downloads/usage.db.bak
-jq -c 'with_entries(.value |= (. | tostring + "1" | tonumber))' pio/core/.cache/downloads/usage.db.bak >pio/core/.cache/downloads/usage.db
 # Compress `pio` directory to prevent dh_clean from sanitizing it
 tar -cf pio.tar pio/
 rm -rf pio
@@ -27,10 +20,5 @@ rm -rf debian/changelog
 dch --create --distribution "$SERIES" --package "$package" --newversion "$PKG_VERSION~$SERIES" \
 	"GitHub Actions Automatic packaging for $PKG_VERSION~$SERIES"
 
-if [[ -n $GPG_KEY_ID ]]; then
-	# Build and sign the source deb
-	debuild -S -nc -k"$GPG_KEY_ID"
-else
-	# Build the source deb without signing (forks)
-	debuild -S -nc
-fi
+# Build the source deb
+debuild -S -nc -k"$GPG_KEY_ID"

debian/control

@@ -26,8 +26,7 @@ Build-Depends: debhelper-compat (= 13),
                libx11-dev,
                libinput-dev,
                libxkbcommon-x11-dev,
-               libsqlite3-dev,
-               libsdl2-dev
+               libsqlite3-dev
 Standards-Version: 4.6.2
 Homepage: https://github.com/meshtastic/firmware
 Rules-Requires-Root: no

debian/rules

@@ -9,10 +9,7 @@
 PIO_ENV:=\
 	PLATFORMIO_CORE_DIR=pio/core \
 	PLATFORMIO_LIBDEPS_DIR=pio/libdeps \
-	PLATFORMIO_PACKAGES_DIR=pio/packages \
-	PLATFORMIO_SETTING_ENABLE_TELEMETRY=0 \
-	PLATFORMIO_SETTING_CHECK_PLATFORMIO_INTERVAL=3650 \
-	PLATFORMIO_SETTING_CHECK_PRUNE_SYSTEM_THRESHOLD=10240
+	PLATFORMIO_PACKAGES_DIR=pio/packages
 
 # Raspbian armhf builds should be compatible with armv6-hardfloat
 # https://www.valvers.com/open-software/raspberry-pi/bare-metal-programming-in-c-part-1/#rpi1-compiler-flags

meshtasticd.spec.rpkg

@@ -49,7 +49,6 @@ BuildRequires: pkgconfig(libulfius)
 BuildRequires: pkgconfig(x11)
 BuildRequires: pkgconfig(libinput)
 BuildRequires: pkgconfig(xkbcommon-x11)
-BuildRequires: pkgconfig(sdl2)
 
 # libbsd is needed on older Fedora/RHEL to provide 'strlcpy'
 %if 0%{?fedora} >= 39 || 0%{?rhel} >= 10
@@ -60,14 +59,8 @@ BuildRequires: pkgconfig(libbsd-overlay)
 
 Requires:      systemd-udev
 
-# Declare that this package provides the user/group it creates in %pre
-# Required for Fedora 43+ which tracks users/groups as RPM dependencies
-Provides:      user(%{meshtasticd_user})
-Provides:      group(%{meshtasticd_user})
-Provides:      group(spi)
-
 %description
-Meshtastic daemon. Meshtastic is an off-grid
+Meshtastic daemon for controlling Meshtastic devices. Meshtastic is an off-grid
 text communication platform that uses inexpensive LoRa radios.
 
 %prep
@@ -158,7 +151,6 @@ fi
 %license LICENSE
 %doc README.md
 %{_bindir}/meshtasticd
-%{_bindir}/meshtasticd-start.sh
 %dir %{_localstatedir}/lib/meshtasticd
 %{_udevrulesdir}/99-meshtasticd-udev.rules
 %dir %{_sysconfdir}/meshtasticd

platformio.ini

@@ -50,13 +50,11 @@ build_flags = -Wno-missing-field-initializers
 	-DRADIOLIB_EXCLUDE_APRS=1
 	-DRADIOLIB_EXCLUDE_LORAWAN=1
 	-DMESHTASTIC_EXCLUDE_DROPZONE=1
-	-DMESHTASTIC_EXCLUDE_REPLYBOT=1
 	-DMESHTASTIC_EXCLUDE_REMOTEHARDWARE=1
 	-DMESHTASTIC_EXCLUDE_HEALTH_TELEMETRY=1
 	-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
 	-DMESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE=1
 	-DMESHTASTIC_EXCLUDE_POWERMON=1
-	-DMESHTASTIC_EXCLUDE_STATUS=1
 	-D MAX_THREADS=40 ; As we've split modules, we have more threads to manage
 	-DLED_BUILTIN=-1
 	#-DBUILD_EPOCH=$UNIX_TIME ; set in platformio-custom.py now
@@ -97,11 +95,7 @@ lib_deps =
 	${env.lib_deps}
 	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=end2endzone/library/NonBlockingRTTTL
 	end2endzone/NonBlockingRTTTL@1.4.0
-build_unflags =
-	-std=c++11
-	-std=gnu++11
 build_flags = ${env.build_flags} -Os
-	-std=gnu++17
 build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/niche/>
 
 ; Common libs for communicating over TCP/IP networks such as MQTT
@@ -121,12 +115,12 @@ lib_deps =
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	jgromes/RadioLib@7.6.0
+	jgromes/RadioLib@7.5.0
 
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/499f3a806d729e49ea5148a1633e9b64ae8c2d2e.zip
+	https://github.com/meshtastic/device-ui/archive/6c75195e9987b7a49563232234f2f868dd343cae.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -142,7 +136,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit BME280 packageName=adafruit/library/Adafruit BME280 Library
 	adafruit/Adafruit BME280 Library@2.3.0
 	# renovate: datasource=custom.pio depName=Adafruit DPS310 packageName=adafruit/library/Adafruit DPS310
-	adafruit/Adafruit DPS310@1.1.6
+	adafruit/Adafruit DPS310@1.1.5
 	# renovate: datasource=custom.pio depName=Adafruit MCP9808 packageName=adafruit/library/Adafruit MCP9808 Library
 	adafruit/Adafruit MCP9808 Library@2.0.2
 	# renovate: datasource=custom.pio depName=Adafruit INA260 packageName=adafruit/library/Adafruit INA260 Library
@@ -150,11 +144,11 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit INA219 packageName=adafruit/library/Adafruit INA219
 	adafruit/Adafruit INA219@1.2.3
 	# renovate: datasource=custom.pio depName=Adafruit MPU6050 packageName=adafruit/library/Adafruit MPU6050
-	adafruit/Adafruit MPU6050@2.2.9
+	adafruit/Adafruit MPU6050@2.2.8
 	# renovate: datasource=custom.pio depName=Adafruit LIS3DH packageName=adafruit/library/Adafruit LIS3DH
 	adafruit/Adafruit LIS3DH@1.3.0
 	# renovate: datasource=custom.pio depName=Adafruit AHTX0 packageName=adafruit/library/Adafruit AHTX0
-	adafruit/Adafruit AHTX0@2.0.6
+	adafruit/Adafruit AHTX0@2.0.5
 	# renovate: datasource=custom.pio depName=Adafruit LSM6DS packageName=adafruit/library/Adafruit LSM6DS
 	adafruit/Adafruit LSM6DS@4.7.4
 	# renovate: datasource=custom.pio depName=Adafruit TSL2591 packageName=adafruit/library/Adafruit TSL2591 Library
@@ -162,7 +156,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=EmotiBit MLX90632 packageName=emotibit/library/EmotiBit MLX90632
 	emotibit/EmotiBit MLX90632@1.0.8
 	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
-	adafruit/Adafruit MLX90614 Library@2.1.6
+	adafruit/Adafruit MLX90614 Library@2.1.5
 	# renovate: datasource=git-refs depName=INA3221 packageName=https://github.com/sgtwilko/INA3221 gitBranch=FixOverflow
 	https://github.com/sgtwilko/INA3221/archive/bb03d7e9bfcc74fc798838a54f4f99738f29fc6a.zip
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
@@ -184,12 +178,44 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
 	dfrobot/DFRobot_BMM150@1.0.0
 	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
-	adafruit/Adafruit TSL2561@1.1.3
+	adafruit/Adafruit TSL2561@1.1.2
 	# renovate: datasource=custom.pio depName=BH1750_WE packageName=wollewald/library/BH1750_WE
 	wollewald/BH1750_WE@1.1.10
 
-; Common environmental sensor libraries (not included in native / portduino)
-[environmental_extra_common]
+; (not included in native / portduino)
+[environmental_extra]
+lib_deps =
+	# renovate: datasource=custom.pio depName=Adafruit BMP3XX packageName=adafruit/library/Adafruit BMP3XX Library
+	adafruit/Adafruit BMP3XX Library@2.1.6
+	# renovate: datasource=custom.pio depName=Adafruit MAX1704X packageName=adafruit/library/Adafruit MAX1704X
+	adafruit/Adafruit MAX1704X@1.0.3
+	# renovate: datasource=custom.pio depName=Adafruit SHTC3 packageName=adafruit/library/Adafruit SHTC3 Library
+	adafruit/Adafruit SHTC3 Library@1.0.2
+	# renovate: datasource=custom.pio depName=Adafruit LPS2X packageName=adafruit/library/Adafruit LPS2X
+	adafruit/Adafruit LPS2X@2.0.6
+	# renovate: datasource=custom.pio depName=Adafruit SHT31 packageName=adafruit/library/Adafruit SHT31 Library
+	adafruit/Adafruit SHT31 Library@2.2.2
+	# renovate: datasource=custom.pio depName=Adafruit VEML7700 packageName=adafruit/library/Adafruit VEML7700 Library
+	adafruit/Adafruit VEML7700 Library@2.1.6
+	# renovate: datasource=custom.pio depName=Adafruit SHT4x packageName=adafruit/library/Adafruit SHT4x Library
+	adafruit/Adafruit SHT4x Library@1.0.5
+	# renovate: datasource=custom.pio depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/library/SparkFun Qwiic Scale NAU7802 Arduino Library
+	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
+	# renovate: datasource=custom.pio depName=ClosedCube OPT3001 packageName=closedcube/library/ClosedCube OPT3001
+	closedcube/ClosedCube OPT3001@1.1.2
+	# renovate: datasource=custom.pio depName=Bosch BSEC2 packageName=boschsensortec/library/bsec2
+	boschsensortec/bsec2@1.10.2610
+	# renovate: datasource=custom.pio depName=Bosch BME68x packageName=boschsensortec/library/BME68x Sensor Library
+	boschsensortec/BME68x Sensor Library@1.3.40408
+	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
+	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
+	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
+	sensirion/Sensirion Core@0.7.2
+	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
+	sensirion/Sensirion I2C SCD4x@1.1.0
+
+; Same as environmental_extra but without BSEC (saves ~3.5KB DRAM for original ESP32 targets)
+[environmental_extra_no_bsec]
 lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit BMP3XX packageName=adafruit/library/Adafruit BMP3XX Library
 	adafruit/Adafruit BMP3XX Library@2.1.6
@@ -212,26 +238,6 @@ lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
 	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
 	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
-	sensirion/Sensirion Core@0.7.3
+	sensirion/Sensirion Core@0.7.2
 	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
 	sensirion/Sensirion I2C SCD4x@1.1.0
-	# renovate: datasource=custom.pio depName=Sensirion I2C SFA3x packageName=sensirion/library/Sensirion I2C SFA3x
-	sensirion/Sensirion I2C SFA3x@1.0.0
-	# renovate: datasource=custom.pio depName=Sensirion I2C SCD30 packageName=sensirion/library/Sensirion I2C SCD30
-	sensirion/Sensirion I2C SCD30@1.0.0
-
-; Environmental sensors with BSEC2 (Bosch proprietary IAQ)
-[environmental_extra]
-lib_deps =
-	${environmental_extra_common.lib_deps}
-	# renovate: datasource=custom.pio depName=Bosch BSEC2 packageName=boschsensortec/library/bsec2
-	boschsensortec/bsec2@1.10.2610
-	# renovate: datasource=custom.pio depName=Bosch BME68x packageName=boschsensortec/library/BME68x Sensor Library
-	boschsensortec/BME68x Sensor Library@1.3.40408
-
-; Environmental sensors without BSEC (saves ~3.5KB DRAM for original ESP32 targets)
-[environmental_extra_no_bsec]
-lib_deps =
-	${environmental_extra_common.lib_deps}
-	# renovate: datasource=custom.pio depName=Adafruit_BME680 packageName=adafruit/library/Adafruit BME680 Library
-	adafruit/Adafruit BME680 Library@2.0.6

src/AmbientLightingThread.h

@@ -1,23 +1,19 @@
-#ifndef AMBIENTLIGHTINGTHREAD_H
-#define AMBIENTLIGHTINGTHREAD_H
-
 #include "Observer.h"
 #include "configuration.h"
-#include "detect/ScanI2C.h"
-#include "sleep.h"
 
 #ifdef HAS_NCP5623
-#include <Wire.h>
-
-#include <NCP5623.h>
+#include <graphics/RAKled.h>
+NCP5623 rgb;
 #endif
 
 #ifdef HAS_LP5562
 #include <graphics/NomadStarLED.h>
+LP5562 rgbw;
 #endif
 
 #ifdef HAS_NEOPIXEL
-#include <Adafruit_NeoPixel.h>
+#include <graphics/NeoPixel.h>
+Adafruit_NeoPixel pixels(NEOPIXEL_COUNT, NEOPIXEL_DATA, NEOPIXEL_TYPE);
 #endif
 
 #ifdef UNPHONE
@@ -25,24 +21,10 @@
 extern unPhone unphone;
 #endif
 
+namespace concurrency
+{
 class AmbientLightingThread : public concurrency::OSThread
 {
-    friend class StatusLEDModule; // Let the LEDStatusModule trigger the ambient lighting for notifications and battery status.
-    friend class ExternalNotificationModule; // Let the ExternalNotificationModule trigger the ambient lighting for notifications.
-
-  private:
-#ifdef HAS_NCP5623
-    NCP5623 rgb;
-#endif
-
-#ifdef HAS_LP5562
-    LP5562 rgbw;
-#endif
-
-#ifdef HAS_NEOPIXEL
-    Adafruit_NeoPixel pixels = Adafruit_NeoPixel(NEOPIXEL_COUNT, NEOPIXEL_DATA, NEOPIXEL_TYPE);
-#endif
-
   public:
     explicit AmbientLightingThread(ScanI2C::DeviceType type) : OSThread("AmbientLighting")
     {
@@ -54,15 +36,14 @@ class AmbientLightingThread : public concurrency::OSThread
         moduleConfig.ambient_lighting.led_state = true;
 #endif
 #endif
-#if AMBIENT_LIGHTING_TEST
-        // define to enable test
-        moduleConfig.ambient_lighting.led_state = true;
-        moduleConfig.ambient_lighting.current = 10;
+        // Uncomment to test module
+        // moduleConfig.ambient_lighting.led_state = true;
+        // moduleConfig.ambient_lighting.current = 10;
         // Default to a color based on our node number
-        moduleConfig.ambient_lighting.red = (myNodeInfo.my_node_num & 0xFF0000) >> 16;
-        moduleConfig.ambient_lighting.green = (myNodeInfo.my_node_num & 0x00FF00) >> 8;
-        moduleConfig.ambient_lighting.blue = myNodeInfo.my_node_num & 0x0000FF;
-#endif
+        // moduleConfig.ambient_lighting.red = (myNodeInfo.my_node_num & 0xFF0000) >> 16;
+        // moduleConfig.ambient_lighting.green = (myNodeInfo.my_node_num & 0x00FF00) >> 8;
+        // moduleConfig.ambient_lighting.blue = myNodeInfo.my_node_num & 0x0000FF;
+
 #if defined(HAS_NCP5623) || defined(HAS_LP5562)
         _type = type;
         if (_type == ScanI2C::DeviceType::NONE) {
@@ -72,6 +53,11 @@ class AmbientLightingThread : public concurrency::OSThread
         }
 #endif
 #ifdef HAS_RGB_LED
+        if (!moduleConfig.ambient_lighting.led_state) {
+            LOG_DEBUG("AmbientLighting Disable due to moduleConfig.ambient_lighting.led_state OFF");
+            disable();
+            return;
+        }
         LOG_DEBUG("AmbientLighting init");
 #ifdef HAS_NCP5623
         if (_type == ScanI2C::NCP5623) {
@@ -91,13 +77,7 @@ class AmbientLightingThread : public concurrency::OSThread
                 pixels.clear(); // Set all pixel colors to 'off'
                 pixels.setBrightness(moduleConfig.ambient_lighting.current);
 #endif
-                if (!moduleConfig.ambient_lighting.led_state) {
-                    LOG_DEBUG("AmbientLighting Disable due to moduleConfig.ambient_lighting.led_state OFF");
-                    disable();
-                    return;
-                }
-                setLighting(moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
-                            moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+                setLighting();
 #endif
 #if defined(HAS_NCP5623) || defined(HAS_LP5562)
             }
@@ -111,8 +91,7 @@ class AmbientLightingThread : public concurrency::OSThread
 #if defined(HAS_NCP5623) || defined(HAS_LP5562)
             if ((_type == ScanI2C::NCP5623 || _type == ScanI2C::LP5562) && moduleConfig.ambient_lighting.led_state) {
 #endif
-                setLighting(moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
-                            moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+                setLighting();
                 return 30000; // 30 seconds to reset from any animations that may have been running from Ext. Notification
 #if defined(HAS_NCP5623) || defined(HAS_LP5562)
             }
@@ -169,53 +148,65 @@ class AmbientLightingThread : public concurrency::OSThread
             return 0;
         }
 
-      protected:
-        void setLighting(float current, uint8_t red, uint8_t green, uint8_t blue)
+        void setLighting()
         {
 #ifdef HAS_NCP5623
-            rgb.setCurrent(current);
-            rgb.setRed(red);
-            rgb.setGreen(green);
-            rgb.setBlue(blue);
-            LOG_DEBUG("Init NCP5623 Ambient light w/ current=%f, red=%d, green=%d, blue=%d", current, red, green, blue);
+            rgb.setCurrent(moduleConfig.ambient_lighting.current);
+            rgb.setRed(moduleConfig.ambient_lighting.red);
+            rgb.setGreen(moduleConfig.ambient_lighting.green);
+            rgb.setBlue(moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init NCP5623 Ambient light w/ current=%d, red=%d, green=%d, blue=%d",
+                      moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef HAS_LP5562
-            rgbw.setCurrent(current);
-            rgbw.setRed(red);
-            rgbw.setGreen(green);
-            rgbw.setBlue(blue);
-            LOG_DEBUG("Init LP5562 Ambient light w/ current=%f, red=%d, green=%d, blue=%d", current, red, green, blue);
+            rgbw.setCurrent(moduleConfig.ambient_lighting.current);
+            rgbw.setRed(moduleConfig.ambient_lighting.red);
+            rgbw.setGreen(moduleConfig.ambient_lighting.green);
+            rgbw.setBlue(moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init LP5562 Ambient light w/ current=%d, red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.current,
+                      moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef HAS_NEOPIXEL
-            pixels.fill(pixels.Color(red, green, blue), 0, NEOPIXEL_COUNT);
+            pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                                     moduleConfig.ambient_lighting.blue),
+                        0, NEOPIXEL_COUNT);
 
 // RadioMaster Bandit has addressable LED at the two buttons
 // this allow us to set different lighting for them in variant.h file.
+#ifdef RADIOMASTER_900_BANDIT
 #if defined(BUTTON1_COLOR) && defined(BUTTON1_COLOR_INDEX)
             pixels.fill(BUTTON1_COLOR, BUTTON1_COLOR_INDEX, 1);
 #endif
 #if defined(BUTTON2_COLOR) && defined(BUTTON2_COLOR_INDEX)
             pixels.fill(BUTTON2_COLOR, BUTTON2_COLOR_INDEX, 1);
+#endif
 #endif
             pixels.show();
-            // LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%f, red=%d, green=%d, blue=%d",
-            //        current, red, green, blue);
+            // LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
+            //        moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
+            //        moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef RGBLED_CA
-            analogWrite(RGBLED_RED, 255 - red);
-            analogWrite(RGBLED_GREEN, 255 - green);
-            analogWrite(RGBLED_BLUE, 255 - blue);
-            LOG_DEBUG("Init Ambient light RGB Common Anode w/ red=%d, green=%d, blue=%d", red, green, blue);
+            analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);
+            analogWrite(RGBLED_GREEN, 255 - moduleConfig.ambient_lighting.green);
+            analogWrite(RGBLED_BLUE, 255 - moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init Ambient light RGB Common Anode w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #elif defined(RGBLED_RED)
-        analogWrite(RGBLED_RED, red);
-        analogWrite(RGBLED_GREEN, green);
-        analogWrite(RGBLED_BLUE, blue);
-        LOG_DEBUG("Init Ambient light RGB Common Cathode w/ red=%d, green=%d, blue=%d", red, green, blue);
+        analogWrite(RGBLED_RED, moduleConfig.ambient_lighting.red);
+        analogWrite(RGBLED_GREEN, moduleConfig.ambient_lighting.green);
+        analogWrite(RGBLED_BLUE, moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Init Ambient light RGB Common Cathode w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+                  moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef UNPHONE
-            unphone.rgb(red, green, blue);
-            LOG_DEBUG("Init unPhone Ambient light w/ red=%d, green=%d, blue=%d", red, green, blue);
+            unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                        moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init unPhone Ambient light w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
         }
     };
-#endif // AMBIENTLIGHTINGTHREAD_H
+
+} // namespace concurrency

src/AudioThread.h

@@ -4,7 +4,6 @@
 #include "configuration.h"
 #include "main.h"
 #include "sleep.h"
-#include <memory>
 
 #ifdef HAS_I2S
 #include <AudioFileSourcePROGMEM.h>
@@ -30,9 +29,9 @@ class AudioThread : public concurrency::OSThread
         io.digitalWrite(EXPANDS_AMP_EN, HIGH);
 #endif
         setCPUFast(true);
-        rtttlFile = std::unique_ptr<AudioFileSourcePROGMEM>(new AudioFileSourcePROGMEM(data, len));
-        i2sRtttl = std::unique_ptr<AudioGeneratorRTTTL>(new AudioGeneratorRTTTL());
-        i2sRtttl->begin(rtttlFile.get(), audioOut.get());
+        rtttlFile = new AudioFileSourcePROGMEM(data, len);
+        i2sRtttl = new AudioGeneratorRTTTL();
+        i2sRtttl->begin(rtttlFile, audioOut);
     }
 
     // Also handles actually playing the RTTTL, needs to be called in loop
@@ -48,10 +47,14 @@ class AudioThread : public concurrency::OSThread
     {
         if (i2sRtttl != nullptr) {
             i2sRtttl->stop();
+            delete i2sRtttl;
             i2sRtttl = nullptr;
         }
 
-        rtttlFile = nullptr;
+        if (rtttlFile != nullptr) {
+            delete rtttlFile;
+            rtttlFile = nullptr;
+        }
 
         setCPUFast(false);
 #ifdef T_LORA_PAGER
@@ -63,14 +66,16 @@ class AudioThread : public concurrency::OSThread
     {
         if (i2sRtttl != nullptr) {
             i2sRtttl->stop();
+            delete i2sRtttl;
             i2sRtttl = nullptr;
         }
 
 #ifdef T_LORA_PAGER
         io.digitalWrite(EXPANDS_AMP_EN, HIGH);
 #endif
-        auto sam = std::unique_ptr<ESP8266SAM>(new ESP8266SAM);
-        sam->Say(audioOut.get(), text);
+        ESP8266SAM *sam = new ESP8266SAM;
+        sam->Say(audioOut, text);
+        delete sam;
         setCPUFast(false);
 #ifdef T_LORA_PAGER
         io.digitalWrite(EXPANDS_AMP_EN, LOW);
@@ -91,15 +96,15 @@ class AudioThread : public concurrency::OSThread
   private:
     void initOutput()
     {
-        audioOut = std::unique_ptr<AudioOutputI2S>(new AudioOutputI2S(1, AudioOutputI2S::EXTERNAL_I2S));
+        audioOut = new AudioOutputI2S(1, AudioOutputI2S::EXTERNAL_I2S);
         audioOut->SetPinout(DAC_I2S_BCK, DAC_I2S_WS, DAC_I2S_DOUT, DAC_I2S_MCLK);
         audioOut->SetGain(0.2);
     };
 
-    std::unique_ptr<AudioGeneratorRTTTL> i2sRtttl = nullptr;
-    std::unique_ptr<AudioOutputI2S> audioOut = nullptr;
+    AudioGeneratorRTTTL *i2sRtttl = nullptr;
+    AudioOutputI2S *audioOut = nullptr;
 
-    std::unique_ptr<AudioFileSourcePROGMEM> rtttlFile = nullptr;
+    AudioFileSourcePROGMEM *rtttlFile = nullptr;
 };
 
 #endif

src/BluetoothStatus.h

@@ -89,14 +89,22 @@ class BluetoothStatus : public Status
             case ConnectionState::CONNECTED:
                 LOG_DEBUG("BluetoothStatus CONNECTED");
 #ifdef BLE_LED
-                digitalWrite(BLE_LED, LED_STATE_ON);
+#ifdef BLE_LED_INVERTED
+                digitalWrite(BLE_LED, LOW);
+#else
+                digitalWrite(BLE_LED, HIGH);
+#endif
 #endif
                 break;
 
             case ConnectionState::DISCONNECTED:
                 LOG_DEBUG("BluetoothStatus DISCONNECTED");
 #ifdef BLE_LED
-                digitalWrite(BLE_LED, LED_STATE_OFF);
+#ifdef BLE_LED_INVERTED
+                digitalWrite(BLE_LED, HIGH);
+#else
+                digitalWrite(BLE_LED, LOW);
+#endif
 #endif
                 break;
             }

src/Led.cpp

@@ -0,0 +1,66 @@
+#include "Led.h"
+#include "PowerMon.h"
+#include "main.h"
+#include "power.h"
+
+GpioVirtPin ledForceOn, ledBlink;
+
+#if defined(LED_PIN)
+// Most boards have a GPIO for LED control
+static GpioHwPin ledRawHwPin(LED_PIN);
+#else
+static GpioVirtPin ledRawHwPin; // Dummy pin for no hardware
+#endif
+
+#if LED_STATE_ON == 0
+static GpioVirtPin ledHwPin;
+static GpioNotTransformer ledInverter(&ledHwPin, &ledRawHwPin);
+#else
+static GpioPin &ledHwPin = ledRawHwPin;
+#endif
+
+#if defined(HAS_PMU)
+/**
+ * A GPIO controlled by the PMU
+ */
+class GpioPmuPin : public GpioPin
+{
+  public:
+    void set(bool value)
+    {
+        if (pmu_found && PMU) {
+            // blink the axp led
+            PMU->setChargingLedMode(value ? XPOWERS_CHG_LED_ON : XPOWERS_CHG_LED_OFF);
+        }
+    }
+} ledPmuHwPin;
+
+// In some cases we need to drive a PMU LED and a normal LED
+static GpioSplitter ledFinalPin(&ledHwPin, &ledPmuHwPin);
+#else
+static GpioPin &ledFinalPin = ledHwPin;
+#endif
+
+#ifdef USE_POWERMON
+/**
+ * We monitor changes to the LED drive output because we use that as a sanity test in our power monitor stuff.
+ */
+class MonitoredLedPin : public GpioPin
+{
+  public:
+    void set(bool value)
+    {
+        if (powerMon) {
+            if (value)
+                powerMon->setState(meshtastic_PowerMon_State_LED_On);
+            else
+                powerMon->clearState(meshtastic_PowerMon_State_LED_On);
+        }
+        ledFinalPin.set(value);
+    }
+} monitoredLedPin;
+#else
+static GpioPin &monitoredLedPin = ledFinalPin;
+#endif
+
+static GpioBinaryTransformer ledForcer(&ledForceOn, &ledBlink, &monitoredLedPin, GpioBinaryTransformer::Or);

src/Led.h

@@ -0,0 +1,7 @@
+#include "GpioLogic.h"
+#include "configuration.h"
+
+/**
+ * ledForceOn and ledForceOff both override the normal ledBlinker behavior (which is controlled by main)
+ */
+extern GpioVirtPin ledForceOn, ledBlink;

src/Power.cpp

@@ -459,8 +459,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
         // if it's not HIGH - check the battery
 #endif
-        // If we have an EXT_PWR_DETECT pin and it indicates no external power, believe it.
-        return false;
 
 // technically speaking this should work for all(?) NRF52 boards
 // but needs testing across multiple devices. NRF52 USB would not even work if
@@ -692,9 +690,7 @@ bool Power::setup()
     bool found = false;
     if (axpChipInit()) {
         found = true;
-    } else if (cw2015Init()) {
-        found = true;
-    } else if (max17048Init()) {
+    } else if (lipoInit()) {
         found = true;
     } else if (lipoChargerInit()) {
         found = true;
@@ -704,11 +700,11 @@ bool Power::setup()
         found = true;
     } else if (analogInit()) {
         found = true;
-    } else {
-#ifdef NRF_APM
-        found = true;
-#endif
     }
+
+#ifdef NRF_APM
+    found = true;
+#endif
 #ifdef EXT_PWR_DETECT
     attachInterrupt(
         EXT_PWR_DETECT,
@@ -846,10 +842,8 @@ void Power::readPowerStatus()
 
     if (batteryLevel) {
         hasBattery = batteryLevel->isBatteryConnect() ? OptTrue : OptFalse;
-#ifndef NRF_APM
         usbPowered = batteryLevel->isVbusIn() ? OptTrue : OptFalse;
         isChargingNow = batteryLevel->isCharging() ? OptTrue : OptFalse;
-#endif
         if (hasBattery) {
             batteryVoltageMv = batteryLevel->getBattVoltage();
             // If the AXP192 returns a valid battery percentage, use it
@@ -1325,7 +1319,7 @@ bool Power::axpChipInit()
 /**
  * Wrapper class for an I2C MAX17048 Lipo battery sensor.
  */
-class MAX17048BatteryLevel : public HasBatteryLevel
+class LipoBatteryLevel : public HasBatteryLevel
 {
   private:
     MAX17048Singleton *max17048 = nullptr;
@@ -1373,18 +1367,18 @@ class MAX17048BatteryLevel : public HasBatteryLevel
     virtual bool isCharging() override { return max17048->isBatteryCharging(); }
 };
 
-MAX17048BatteryLevel max17048Level;
+LipoBatteryLevel lipoLevel;
 
 /**
  * Init the Lipo battery level sensor
  */
-bool Power::max17048Init()
+bool Power::lipoInit()
 {
-    bool result = max17048Level.runOnce();
-    LOG_DEBUG("Power::max17048Init lipo sensor is %s", result ? "ready" : "not ready yet");
+    bool result = lipoLevel.runOnce();
+    LOG_DEBUG("Power::lipoInit lipo sensor is %s", result ? "ready" : "not ready yet");
     if (!result)
         return false;
-    batteryLevel = &max17048Level;
+    batteryLevel = &lipoLevel;
     return true;
 }
 
@@ -1392,88 +1386,7 @@ bool Power::max17048Init()
 /**
  * The Lipo battery level sensor is unavailable - default to AnalogBatteryLevel
  */
-bool Power::max17048Init()
-{
-    return false;
-}
-#endif
-
-#if !MESHTASTIC_EXCLUDE_I2C && HAS_CW2015
-
-class CW2015BatteryLevel : public AnalogBatteryLevel
-{
-  public:
-    /**
-     * Battery state of charge, from 0 to 100 or -1 for unknown
-     */
-    virtual int getBatteryPercent() override
-    {
-        int data = -1;
-        Wire.beginTransmission(CW2015_ADDR);
-        Wire.write(0x04);
-        if (Wire.endTransmission() == 0) {
-            if (Wire.requestFrom(CW2015_ADDR, (uint8_t)1)) {
-                data = Wire.read();
-            }
-        }
-        return data;
-    }
-
-    /**
-     * The raw voltage of the battery in millivolts, or NAN if unknown
-     */
-    virtual uint16_t getBattVoltage() override
-    {
-        uint16_t mv = 0;
-        Wire.beginTransmission(CW2015_ADDR);
-        Wire.write(0x02);
-        if (Wire.endTransmission() == 0) {
-            if (Wire.requestFrom(CW2015_ADDR, (uint8_t)2)) {
-                mv = Wire.read();
-                mv <<= 8;
-                mv |= Wire.read();
-                // Voltage is read in  305uV units, convert to mV
-                mv = mv * 305 / 1000;
-            }
-        }
-        return mv;
-    }
-};
-
-CW2015BatteryLevel cw2015Level;
-
-/**
- * Init the CW2015 battery level sensor
- */
-bool Power::cw2015Init()
-{
-
-    Wire.beginTransmission(CW2015_ADDR);
-    uint8_t getInfo[] = {0x0a, 0x00};
-    Wire.write(getInfo, 2);
-    Wire.endTransmission();
-    delay(10);
-    Wire.beginTransmission(CW2015_ADDR);
-    Wire.write(0x00);
-    bool result = false;
-    if (Wire.endTransmission() == 0) {
-        if (Wire.requestFrom(CW2015_ADDR, (uint8_t)1)) {
-            uint8_t data = Wire.read();
-            LOG_DEBUG("CW2015 init read data: 0x%x", data);
-            if (data == 0x73) {
-                result = true;
-                batteryLevel = &cw2015Level;
-            }
-        }
-    }
-    return result;
-}
-
-#else
-/**
- * The CW2015 battery level sensor is unavailable - default to AnalogBatteryLevel
- */
-bool Power::cw2015Init()
+bool Power::lipoInit()
 {
     return false;
 }

src/PowerFSM.cpp

@@ -9,13 +9,13 @@
  */
 #include "PowerFSM.h"
 #include "Default.h"
+#include "Led.h"
 #include "MeshService.h"
 #include "NodeDB.h"
 #include "PowerMon.h"
 #include "configuration.h"
 #include "graphics/Screen.h"
 #include "main.h"
-#include "modules/StatusLEDModule.h"
 #include "sleep.h"
 #include "target_specific.h"
 
@@ -38,10 +38,7 @@ static bool isPowered()
     return true;
 #endif
 
-    bool isRouter = ((config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ||
-                      config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER_LATE)
-                         ? 1
-                         : 0);
+    bool isRouter = (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ? 1 : 0);
 
     // If we are not a router and we already have AC power go to POWER state after init, otherwise go to ON
     // We assume routers might be powered all the time, but from a low current (solar) source
@@ -106,7 +103,7 @@ static void lsIdle()
             uint32_t sleepTime = SLEEP_TIME;
 
             powerMon->setState(meshtastic_PowerMon_State_CPU_LightSleep);
-            statusLEDModule->setPowerLED(false);
+            ledBlink.set(false); // Never leave led on while in light sleep
             esp_sleep_source_t wakeCause2 = doLightSleep(sleepTime * 1000LL);
             powerMon->clearState(meshtastic_PowerMon_State_CPU_LightSleep);
 
@@ -114,7 +111,7 @@ static void lsIdle()
             case ESP_SLEEP_WAKEUP_TIMER:
                 // Normal case: timer expired, we should just go back to sleep ASAP
 
-                statusLEDModule->setPowerLED(true);
+                ledBlink.set(true);             // briefly turn on led
                 wakeCause2 = doLightSleep(100); // leave led on for 1ms
 
                 secsSlept += sleepTime;
@@ -149,7 +146,7 @@ static void lsIdle()
         }
     } else {
         // Time to stop sleeping!
-        statusLEDModule->setPowerLED(false);
+        ledBlink.set(false);
         LOG_INFO("Reached ls_secs, service loop()");
         powerFSM.trigger(EVENT_WAKE_TIMER);
     }
@@ -265,10 +262,7 @@ Fsm powerFSM(&stateBOOT);
 
 void PowerFSM_setup()
 {
-    bool isRouter = ((config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ||
-                      config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER_LATE)
-                         ? 1
-                         : 0);
+    bool isRouter = (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ? 1 : 0);
     bool hasPower = isPowered();
 
     LOG_INFO("PowerFSM init, USB power=%d", hasPower ? 1 : 0);

src/RedirectablePrint.cpp

@@ -227,21 +227,34 @@ void RedirectablePrint::log_to_ble(const char *logLevel, const char *format, va_
         isBleConnected = nrf52Bluetooth != nullptr && nrf52Bluetooth->isConnected();
 #endif
         if (isBleConnected) {
+            char *message;
+            size_t initialLen;
+            size_t len;
+            initialLen = strlen(format);
+            message = new char[initialLen + 1];
+            len = vsnprintf(message, initialLen + 1, format, arg);
+            if (len > initialLen) {
+                delete[] message;
+                message = new char[len + 1];
+                vsnprintf(message, len + 1, format, arg);
+            }
             auto thread = concurrency::OSThread::currentThread;
             meshtastic_LogRecord logRecord = meshtastic_LogRecord_init_zero;
             logRecord.level = getLogLevel(logLevel);
-            vsprintf(logRecord.message, format, arg);
+            strcpy(logRecord.message, message);
             if (thread)
                 strcpy(logRecord.source, thread->ThreadName.c_str());
             logRecord.time = getValidTime(RTCQuality::RTCQualityDevice, true);
 
-            auto buffer = std::unique_ptr<uint8_t[]>(new uint8_t[meshtastic_LogRecord_size]);
-            size_t size = pb_encode_to_bytes(buffer.get(), meshtastic_LogRecord_size, meshtastic_LogRecord_fields, &logRecord);
+            uint8_t *buffer = new uint8_t[meshtastic_LogRecord_size];
+            size_t size = pb_encode_to_bytes(buffer, meshtastic_LogRecord_size, meshtastic_LogRecord_fields, &logRecord);
 #ifdef ARCH_ESP32
-            nimbleBluetooth->sendLog(buffer.get(), size);
+            nimbleBluetooth->sendLog(buffer, size);
 #elif defined(ARCH_NRF52)
-            nrf52Bluetooth->sendLog(buffer.get(), size);
+            nrf52Bluetooth->sendLog(buffer, size);
 #endif
+            delete[] message;
+            delete[] buffer;
         }
     }
 #else
@@ -279,8 +292,8 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
 
     // append \n to format
     size_t len = strlen(format);
-    auto newFormat = std::unique_ptr<char[]>(new char[len + 2]);
-    strcpy(newFormat.get(), format);
+    char *newFormat = new char[len + 2];
+    strcpy(newFormat, format);
     newFormat[len] = '\n';
     newFormat[len + 1] = '\0';
 
@@ -297,18 +310,23 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
             va_end(arg);
         }
         if (portduino_config.logoutputlevel < level_trace && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0) {
+            delete[] newFormat;
             return;
         }
     }
     if (portduino_config.logoutputlevel < level_debug && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0) {
+        delete[] newFormat;
         return;
     } else if (portduino_config.logoutputlevel < level_info && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0) {
+        delete[] newFormat;
         return;
     } else if (portduino_config.logoutputlevel < level_warn && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0) {
+        delete[] newFormat;
         return;
     }
 #endif
     if (moduleConfig.serial.override_console_serial_port && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0) {
+        delete[] newFormat;
         return;
     }
 
@@ -320,19 +338,11 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
 #endif
 
         va_list arg;
-        va_list arg_copy;
-
         va_start(arg, format);
 
-        va_copy(arg_copy, arg);
-        log_to_serial(logLevel, newFormat.get(), arg_copy);
-        va_end(arg_copy);
-
-        va_copy(arg_copy, arg);
-        log_to_syslog(logLevel, newFormat.get(), arg_copy);
-        va_end(arg_copy);
-
-        log_to_ble(logLevel, newFormat.get(), arg);
+        log_to_serial(logLevel, newFormat, arg);
+        log_to_syslog(logLevel, newFormat, arg);
+        log_to_ble(logLevel, newFormat, arg);
 
         va_end(arg);
 #ifdef HAS_FREE_RTOS
@@ -342,10 +352,11 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
 #endif
     }
 
+    delete[] newFormat;
     return;
 }
 
-void RedirectablePrint::hexDump(const char *logLevel, const unsigned char *buf, uint16_t len)
+void RedirectablePrint::hexDump(const char *logLevel, unsigned char *buf, uint16_t len)
 {
     const char alphabet[17] = "0123456789abcdef";
     log(logLevel, "    +------------------------------------------------+ +----------------+");

src/RedirectablePrint.h

@@ -44,7 +44,7 @@ class RedirectablePrint : public Print
     /** like printf but va_list based */
     size_t vprintf(const char *logLevel, const char *format, va_list arg);
 
-    void hexDump(const char *logLevel, const unsigned char *buf, uint16_t len);
+    void hexDump(const char *logLevel, unsigned char *buf, uint16_t len);
 
     std::string mt_sprintf(const std::string fmt_str, ...);
 

src/SerialConsole.cpp

@@ -35,8 +35,6 @@ void consoleInit()
 #if defined(SERIAL_HAS_ON_RECEIVE)
     // onReceive does only exist for HardwareSerial not for USB CDC serial
     Port.onReceive([sc]() { sc->rxInt(); });
-#else
-    (void)sc;
 #endif
     DEBUG_PORT.rpInit(); // Simply sets up semaphore
 }

src/buzz/buzz.cpp

@@ -6,11 +6,6 @@
 #include "Tone.h"
 #endif
 
-#if defined(HAS_I2S)
-#include "main.h"
-#include <unordered_map>
-#endif
-
 #if !defined(ARCH_PORTDUINO)
 extern "C" void delay(uint32_t dwMs);
 #endif
@@ -55,50 +50,6 @@ const int DURATION_1_2 = 500;  // 1/2 note
 const int DURATION_3_4 = 750;  // 3/4 note
 const int DURATION_1_1 = 1000; // 1/1 note
 
-#ifdef HAS_I2S
-void playTonesRTTTL(const ToneDuration *tone_durations, int size)
-{
-    // translate ToneDuration[] to RTTTL string and play using audioThread
-    static std::unordered_map<int, std::string> freqToNote = {
-        {NOTE_C3, "c4"},   {NOTE_CS3, "c#4"}, {NOTE_D3, "d4"},   {NOTE_DS3, "d#4"}, {NOTE_E3, "e4"},   {NOTE_F3, "f4"},
-        {NOTE_FS3, "f#4"}, {NOTE_G3, "g4"},   {NOTE_GS3, "g#4"}, {NOTE_A3, "a4"},   {NOTE_AS3, "a#4"}, {NOTE_B3, "b4"},
-        {NOTE_C4, "c5"},   {NOTE_E4, "e5"},   {NOTE_G4, "g5"},   {NOTE_A4, "a5"},   {NOTE_C5, "c6"},   {NOTE_E5, "e6"},
-        {NOTE_G5, "g6"},   {NOTE_F5, "f6"},   {NOTE_G6, "g7"},   {NOTE_E7, "e8"}};
-
-    char rtttl[128] = "tone:d=32,o=4,b=200:"; // default duration and octave
-    for (int i = 0; i < size; i++) {
-        const auto &td = tone_durations[i];
-        std::string note = "b4";
-        if (freqToNote.find(td.frequency_khz) != freqToNote.end()) {
-            note = freqToNote[td.frequency_khz];
-        }
-        int dur = 32; // default duration
-        if (td.duration_ms >= 1000)
-            dur = 1;
-        else if (td.duration_ms >= 500)
-            dur = 2;
-        else if (td.duration_ms >= 250)
-            dur = 4;
-        else if (td.duration_ms >= 125)
-            dur = 8;
-        else if (td.duration_ms >= 62)
-            dur = 16;
-        else
-            dur = 32;
-
-        char noteStr[64];
-        snprintf(noteStr, sizeof(noteStr), "%s,%d", note.c_str(), dur);
-        strncat(rtttl, noteStr, sizeof(rtttl) - strlen(rtttl) - 1);
-
-        audioThread->beginRttl(rtttl, strlen(rtttl));
-        while (audioThread->isPlaying()) {
-            delay(10);
-        }
-        return;
-    }
-}
-#endif
-
 void playTones(const ToneDuration *tone_durations, int size)
 {
     if (config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_DISABLED ||
@@ -106,13 +57,7 @@ void playTones(const ToneDuration *tone_durations, int size)
         // Buzzer is disabled or not set to system tones
         return;
     }
-#ifdef HAS_I2S
-    if (moduleConfig.external_notification.use_i2s_as_buzzer && audioThread) {
-        playTonesRTTTL(tone_durations, size);
-        return;
-    }
-#endif
-#if defined(PIN_BUZZER)
+#ifdef PIN_BUZZER
     if (!config.device.buzzer_gpio)
         config.device.buzzer_gpio = PIN_BUZZER;
 #endif

src/concurrency/NotifiedWorkerThread.cpp

@@ -76,10 +76,8 @@ bool NotifiedWorkerThread::notifyLater(uint32_t delay, uint32_t v, bool overwrit
 
 void NotifiedWorkerThread::checkNotification()
 {
-    // Atomically read and clear. (This avoids a potential race condition where an interrupt handler could set a new notification
-    // after checkNotification reads but before it clears, which would cause us to miss that notification until the next one comes
-    // in.)
-    auto n = notification.exchange(0); // read+clear atomically: like `n = notification; notification = 0;` but interrupt-safe
+    auto n = notification;
+    notification = 0; // clear notification
     if (n) {
         onNotify(n);
     }

src/concurrency/NotifiedWorkerThread.h

@@ -1,7 +1,6 @@
 #pragma once
 
 #include "OSThread.h"
-#include <atomic>
 
 namespace concurrency
 {
@@ -14,7 +13,7 @@ class NotifiedWorkerThread : public OSThread
     /**
      * The notification that was most recently used to wake the thread.  Read from runOnce()
      */
-    std::atomic<uint32_t> notification{0};
+    uint32_t notification = 0;
 
   public:
     NotifiedWorkerThread(const char *name) : OSThread(name) {}