Merge branch 't-impulse-plus' of https://github.com/meshtastic/firmware into t-impulse-plus

Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>

.devcontainer/devcontainer.json

@@ -8,17 +8,21 @@
   "features": {
     "ghcr.io/devcontainers/features/python:1": {
       "installTools": true,
-      "version": "3.14"
+      "version": "3.13"
     }
   },
   "customizations": {
     "vscode": {
       "extensions": [
         "ms-vscode.cpptools",
-        "platformio.platformio-ide",
+        "Jason2866.esp-decoder",
+        "pioarduino.pioarduino-ide",
         "Trunk.io"
       ],
-      "unwantedRecommendations": ["ms-azuretools.vscode-docker"],
+      "unwantedRecommendations": [
+        "ms-azuretools.vscode-docker",
+        "platformio.platformio-ide"
+      ],
       "settings": {
         "extensions.ignoreRecommendations": true
       }

.trunk/trunk.yaml

@@ -4,19 +4,19 @@ cli:
 plugins:
   sources:
     - id: trunk
-      ref: v1.9.0
+      ref: v1.10.0
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.528
+    - checkov@3.2.529
     - renovate@43.150.0
     - prettier@3.8.3
-    - trufflehog@3.95.2
+    - trufflehog@3.95.3
     - yamllint@1.38.0
     - bandit@1.9.4
     - trivy@0.70.0
     - taplo@0.10.0
-    - ruff@0.15.12
+    - ruff@0.15.13
     - isort@8.0.1
     - markdownlint@0.48.0
     - oxipng@10.1.1
@@ -26,7 +26,7 @@ lint:
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@26.3.1
+    - black@26.5.1
     - git-diff-check
     - gitleaks@8.30.1
     - clang-format@16.0.3

.vscode/extensions.json

@@ -1,10 +1,10 @@
 {
-    // See http://go.microsoft.com/fwlink/?LinkId=827846
-    // for the documentation about the extensions.json format
     "recommendations": [
-        "platformio.platformio-ide"
+        "Jason2866.esp-decoder",
+        "pioarduino.pioarduino-ide"
     ],
     "unwantedRecommendations": [
-        "ms-vscode.cpptools-extension-pack"
+        "ms-vscode.cpptools-extension-pack",
+        "platformio.platformio-ide"
     ]
 }

bin/config.d/lora-station-g3.yaml

@@ -0,0 +1,18 @@
+# Station G3 motherboard with a Raspberry Pi Zero 2W as the MCU daughterboard.
+# Verify spidev / I2C device paths for your OS — they may differ.
+Meta:
+  name: Station G3
+  support: community
+  compatible:
+    - raspberry-pi
+
+Lora:
+  Module: sx1262
+  IRQ: 22                       # BCM pin — wiki spec
+  Reset: 16                     # BCM pin — wiki spec
+  Busy: 24                      # BCM pin — wiki spec
+  # CS: 8                       # BCM 8 = SPI0 CE0 (default); uncomment only to override
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  spidev: spidev0.0
+  # SX126X_MAX_POWER: 19        # matches Station G2 firmware cap; raise carefully per PA jumper mode

boards/station-g3.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "station-g3"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "BQ Station G3",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "",
+  "vendor": "BQ Consulting"
+}

boards/t-impulse-plus.json

@@ -0,0 +1,53 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_T_IMPULSE_PLUS -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x8029"]],
+    "usb_product": "T-Impulse-Plus-nRF52840",
+    "mcu": "nrf52840",
+    "variant": "t-impulse-plus",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Lilygo T-Impulse-Plus-nRF52840",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ]
+  },
+  "url": "https://www.lilygo.cc/",
+  "vendor": "Lilygo"
+}

platformio.ini

@@ -138,7 +138,7 @@ lib_deps =
 	# renovate: datasource=github-tags depName=Adafruit GFX packageName=adafruit/Adafruit-GFX-Library
 	https://github.com/adafruit/Adafruit-GFX-Library/archive/refs/tags/1.12.6.zip
 	# renovate: datasource=github-tags depName=NeoPixel packageName=adafruit/Adafruit_NeoPixel
-	https://github.com/adafruit/Adafruit_NeoPixel/archive/refs/tags/1.15.4.zip
+	https://github.com/adafruit/Adafruit_NeoPixel/archive/1.15.5.zip
 	# renovate: datasource=github-tags depName=Adafruit SSD1306 packageName=adafruit/Adafruit_SSD1306
 	https://github.com/adafruit/Adafruit_SSD1306/archive/refs/tags/2.5.16.zip
 	# renovate: datasource=github-tags depName=Adafruit BMP280 packageName=adafruit/Adafruit_BMP280_Library

src/Power.cpp

@@ -23,6 +23,7 @@
 #include "main.h"
 #include "meshUtils.h"
 #include "power/PowerHAL.h"
+#include "power/SGM41562.h"
 #include "sleep.h"
 
 #if defined(ARCH_PORTDUINO)
@@ -453,6 +454,10 @@ class AnalogBatteryLevel : public HasBatteryLevel
     /// source
     virtual bool isVbusIn() override
     {
+#ifdef HAS_SGM41562
+        if (sgm41562 && sgm41562->refresh())
+            return sgm41562->isInputPowerGood();
+#endif
 #ifdef EXT_PWR_DETECT
 #if defined(HELTEC_CAPSULE_SENSOR_V3) || defined(HELTEC_SENSOR_HUB)
         // if external powered that pin will be pulled down
@@ -483,6 +488,10 @@ class AnalogBatteryLevel : public HasBatteryLevel
     /// we can't be smart enough to say 'full'?
     virtual bool isCharging() override
     {
+#ifdef HAS_SGM41562
+        if (sgm41562 && sgm41562->refresh())
+            return sgm41562->isCharging();
+#endif
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && defined(HAS_RAKPROT) && !defined(HAS_PMU)
         if (hasRAK()) {
             return (rak9154Sensor.isCharging()) ? OptTrue : OptFalse;
@@ -697,6 +706,12 @@ bool Power::analogInit()
  */
 bool Power::setup()
 {
+#ifdef HAS_SGM41562
+    // Initialize the charger early so AnalogBatteryLevel can read charging
+    // state from it. The charger does not provide battery voltage / percent —
+    // those still come from the platform ADC via analogInit() below.
+    initSGM41562(SGM41562_WIRE);
+#endif
     bool found = false;
     if (axpChipInit()) {
         found = true;
@@ -878,7 +893,16 @@ void Power::readPowerStatus()
 
     // Notify any status instances that are observing us
     const PowerStatus powerStatus2 = PowerStatus(hasBattery, usbPowered, isChargingNow, batteryVoltageMv, batteryChargePercent);
-    if (millis() > lastLogTime + 50 * 1000) {
+
+    // Log battery-presence transitions once; skip OptUnknown so we don't lie before the first probe.
+    static OptionalBool prevHasBattery = OptUnknown;
+    if (hasBattery != OptUnknown && hasBattery != prevHasBattery) {
+        LOG_INFO("Power: battery hardware %s", hasBattery == OptTrue ? "detected" : "absent (USB-only)");
+        prevHasBattery = hasBattery;
+    }
+
+    // Periodic telemetry only emits when a battery is actually present (otherwise values are constant -1/0).
+    if (hasBattery == OptTrue && !Throttle::isWithinTimespanMs(lastLogTime, 50 * 1000)) {
         LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d", powerStatus2.getHasUSB(),
                   powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
         lastLogTime = millis();

src/graphics/Screen.cpp

@@ -353,6 +353,11 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
 #elif defined(USE_SSD1306)
     dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
                               (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
+#if defined(OLED_Y_OFFSET_PAGES)
+    // Panels whose active window does not start at GDDRAM row 0 (e.g. 72x40
+    // modules on pages 3..7) need a fixed vertical page shift on every write.
+    static_cast<SSD1306Wire *>(dispdev)->setYOffset(OLED_Y_OFFSET_PAGES);
+#endif
 #elif defined(USE_SPISSD1306)
     dispdev = new SSD1306Spi(SSD1306_RESET, SSD1306_RS, SSD1306_NSS, GEOMETRY_64_48);
     if (!dispdev->init()) {
@@ -834,7 +839,7 @@ int32_t Screen::runOnce()
 
 #ifndef DISABLE_WELCOME_UNSET
     if (!NotificationRenderer::isOverlayBannerShowing() && config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
-#if defined(M5STACK_UNITC6L)
+#if defined(OLED_TINY)
         menuHandler::LoraRegionPicker();
 #else
         menuHandler::OnboardMessage();
@@ -1058,7 +1063,7 @@ void Screen::setFrames(FrameFocus focus)
 #if defined(DISPLAY_CLOCK_FRAME)
     if (!hiddenFrames.clock) {
         fsi.positions.clock = numframes;
-#if defined(M5STACK_UNITC6L)
+#if defined(OLED_TINY)
         normalFrames[numframes++] = graphics::ClockRenderer::drawAnalogClockFrame;
 #else
         normalFrames[numframes++] = uiconfig.is_clockface_analog ? graphics::ClockRenderer::drawAnalogClockFrame
@@ -1511,7 +1516,7 @@ void Screen::showFrame(FrameDirection direction)
 
 void Screen::setFastFramerate()
 {
-#if defined(M5STACK_UNITC6L)
+#if defined(OLED_TINY)
     dispdev->clear();
     dispdev->display();
 #endif

src/graphics/ScreenFonts.h

@@ -96,7 +96,7 @@
 #define FONT_SMALL FONT_MEDIUM_LOCAL // Height: 19
 #define FONT_MEDIUM FONT_LARGE_LOCAL // Height: 28
 #define FONT_LARGE FONT_LARGE_LOCAL  // Height: 28
-#elif defined(M5STACK_UNITC6L)
+#elif defined(OLED_TINY)
 #define FONT_SMALL FONT_SMALL_LOCAL  // Height: 13
 #define FONT_MEDIUM FONT_SMALL_LOCAL // Height: 13
 #define FONT_LARGE FONT_SMALL_LOCAL  // Height: 13

src/graphics/SharedUIDisplay.cpp

@@ -27,6 +27,12 @@ ScreenResolution determineScreenResolution(int16_t screenheight, int16_t screenw
         return ScreenResolution::UltraLow;
     }
 
+#ifdef DISPLAY_FORCE_SMALL_FONTS
+    if (screenwidth <= 160 && screenheight <= 80) {
+        return ScreenResolution::Low;
+    }
+#endif
+
     // Standard OLED screens
     if (screenwidth > 128 && screenheight <= 64) {
         return ScreenResolution::Low;
@@ -155,7 +161,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
 
     int batteryX = 1;
     int batteryY = HEADER_OFFSET_Y + 1;
-#if !defined(M5STACK_UNITC6L)
+#if !defined(OLED_TINY)
     // === Battery Icons ===
     if (usbPowered && !isCharging) { // This is a basic check to determine USB Powered is flagged but not charging
         batteryX += 1;

src/graphics/draw/DebugRenderer.cpp

@@ -449,7 +449,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     nameX = (SCREEN_WIDTH - textWidth) / 2;
     display->drawString(nameX, getTextPositions(display)[line++], frequencyslot);
 
-#if !defined(M5STACK_UNITC6L)
+#if !defined(OLED_TINY)
     // === Fifth Row: Channel Utilization ===
     const char *chUtil = "ChUtil:";
     char chUtilPercentage[10];
@@ -569,7 +569,7 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
         // Label
         display->setTextAlignment(TEXT_ALIGN_LEFT);
         display->drawString(labelX, getTextPositions(display)[line], label);
-#if !defined(M5STACK_UNITC6L)
+#if !defined(OLED_TINY)
         // Bar
         int barY = getTextPositions(display)[line] + (FONT_HEIGHT_SMALL - barHeight) / 2;
         display->setColor(WHITE);

src/graphics/draw/MenuHandler.cpp

@@ -491,7 +491,7 @@ void menuHandler::TZPicker()
 
 void menuHandler::clockMenu()
 {
-#if defined(M5STACK_UNITC6L)
+#if defined(OLED_TINY)
     static const char *optionsArray[] = {"Back", "Time Format", "Timezone"};
 #else
     static const char *optionsArray[] = {"Back", "Clock Face", "Time Format", "Timezone"};

src/graphics/draw/NodeListRenderer.cpp

@@ -21,7 +21,7 @@ extern bool haveGlyphs(const char *str);
 // Global screen instance
 extern graphics::Screen *screen;
 
-#if defined(M5STACK_UNITC6L)
+#if defined(OLED_TINY)
 static uint32_t lastSwitchTime = 0;
 #endif
 namespace graphics
@@ -670,7 +670,7 @@ void drawDynamicListScreen_Nodes(OLEDDisplay *display, OLEDDisplayUiState *state
 
     unsigned long now = millis();
 
-#if defined(M5STACK_UNITC6L)
+#if defined(OLED_TINY)
     display->clear();
     if (now - lastSwitchTime >= 3000) {
         display->display();
@@ -706,7 +706,7 @@ void drawDynamicListScreen_Location(OLEDDisplay *display, OLEDDisplayUiState *st
 
     unsigned long now = millis();
 
-#if defined(M5STACK_UNITC6L)
+#if defined(OLED_TINY)
     display->clear();
     if (now - lastSwitchTime >= 3000) {
         display->display();
@@ -771,7 +771,7 @@ void drawNodeListWithCompasses(OLEDDisplay *display, OLEDDisplayUiState *state,
     double lat = DegD(ourNode->position.latitude_i);
     double lon = DegD(ourNode->position.longitude_i);
 
-#if defined(M5STACK_UNITC6L)
+#if defined(OLED_TINY)
     display->clear();
     uint32_t now = millis();
     if (now - lastSwitchTime >= 2000) {

src/graphics/draw/NotificationRenderer.cpp

@@ -580,7 +580,7 @@ void NotificationRenderer::drawNotificationBox(OLEDDisplay *display, OLEDDisplay
     }
     int16_t boxTop = (display->height() / 2) - (boxHeight / 2);
     boxHeight += (currentResolution == ScreenResolution::High) ? 2 : 1;
-#if defined(M5STACK_UNITC6L)
+#if defined(OLED_TINY)
     if (visibleTotalLines == 1) {
         boxTop += 25;
     }

src/graphics/draw/UIRenderer.cpp

@@ -20,7 +20,7 @@
 
 // External variables
 extern graphics::Screen *screen;
-#if defined(M5STACK_UNITC6L)
+#if defined(OLED_TINY)
 static uint32_t lastSwitchTime = 0;
 #endif
 namespace graphics
@@ -304,7 +304,7 @@ void UIRenderer::drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, i
     if (!node || node->num == nodeDB->getNodeNum() || !node->is_favorite)
         return;
     display->clear();
-#if defined(M5STACK_UNITC6L)
+#if defined(OLED_TINY)
     uint32_t now = millis();
     if (now - lastSwitchTime >= 10000) // 10000 ms = 10 秒
     {
@@ -518,7 +518,7 @@ void UIRenderer::drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, i
     if (seenStr[0]) {
         display->drawString(x, getTextPositions(display)[line++], seenStr);
     }
-#if !defined(M5STACK_UNITC6L)
+#if !defined(OLED_TINY)
     // === 4. Uptime (only show if metric is present) ===
     char uptimeStr[32] = "";
     if (node->has_device_metrics && node->device_metrics.has_uptime_seconds) {
@@ -795,7 +795,7 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
     }
 #endif
 
-#if defined(M5STACK_UNITC6L)
+#if defined(OLED_TINY)
     line += 1;
 
     // === Node Identity ===
@@ -1092,7 +1092,7 @@ void UIRenderer::drawIconScreen(const char *upperMsg, OLEDDisplay *display, OLED
     // needs to be drawn relative to x and y
 
     // draw centered icon left to right and centered above the one line of app text
-#if defined(M5STACK_UNITC6L)
+#if defined(OLED_TINY)
     display->drawXbm(x + (SCREEN_WIDTH - 50) / 2, y + (SCREEN_HEIGHT - 28) / 2, icon_width, icon_height, icon_bits);
     display->setFont(FONT_MEDIUM);
     display->setTextAlignment(TEXT_ALIGN_LEFT);
@@ -1243,7 +1243,7 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
         }
         display->drawString(x, getTextPositions(display)[line++], altitudeLine);
     }
-#if !defined(M5STACK_UNITC6L)
+#if !defined(OLED_TINY)
     // === Draw Compass if heading is valid ===
     if (validHeading) {
         // --- Compass Rendering: landscape (wide) screens use original side-aligned logic ---

src/graphics/images.h

@@ -318,7 +318,7 @@ const uint8_t chirpy_small[] = {0x7f, 0x41, 0x55, 0x55, 0x55, 0x55, 0x41, 0x7f};
 #define connection_icon_height 5
 const uint8_t connection_icon[] = {0x36, 0x41, 0x5D, 0x41, 0x36};
 
-#ifdef M5STACK_UNITC6L
+#ifdef OLED_TINY
 #include "img/icon_small.xbm"
 #else
 #include "img/icon.xbm"

src/input/HapticFeedback.cpp

@@ -0,0 +1,97 @@
+#include "HapticFeedback.h"
+
+#ifdef HAPTIC_FEEDBACK_PIN
+
+#include <Arduino.h>
+
+#ifdef HAPTIC_FEEDBACK_ACTIVE_LOW
+#define HAPTIC_FEEDBACK_ON_STATE LOW
+#define HAPTIC_FEEDBACK_OFF_STATE HIGH
+#else
+#define HAPTIC_FEEDBACK_ON_STATE HIGH
+#define HAPTIC_FEEDBACK_OFF_STATE LOW
+#endif
+
+HapticFeedback *hapticFeedback = nullptr;
+
+void initHapticFeedback()
+{
+    if (!hapticFeedback)
+        hapticFeedback = new HapticFeedback();
+}
+
+HapticFeedback::HapticFeedback() : concurrency::OSThread("Haptic")
+{
+    pinMode(HAPTIC_FEEDBACK_PIN, OUTPUT);
+    digitalWrite(HAPTIC_FEEDBACK_PIN, HAPTIC_FEEDBACK_OFF_STATE);
+}
+
+void HapticFeedback::motorWrite(bool on)
+{
+    digitalWrite(HAPTIC_FEEDBACK_PIN, on ? HAPTIC_FEEDBACK_ON_STATE : HAPTIC_FEEDBACK_OFF_STATE);
+}
+
+void HapticFeedback::pulse(uint16_t durationMs)
+{
+    motorWrite(true);
+    pulseOffAt = millis() + durationMs;
+    if (pulseOffAt == 0) // 0 is the "no pulse" sentinel
+        pulseOffAt = 1;
+    scheduleNext();
+}
+
+void HapticFeedback::armDelayedPulse(uint16_t delayMs, uint16_t durationMs)
+{
+    delayedPulseAt = millis() + delayMs;
+    if (delayedPulseAt == 0)
+        delayedPulseAt = 1;
+    delayedPulseDuration = durationMs;
+    scheduleNext();
+}
+
+void HapticFeedback::cancelDelayedPulse()
+{
+    delayedPulseAt = 0;
+}
+
+void HapticFeedback::scheduleNext()
+{
+    uint32_t now = millis();
+    uint32_t next = 0;
+    if (pulseOffAt != 0)
+        next = pulseOffAt;
+    if (delayedPulseAt != 0 && (next == 0 || (int32_t)(delayedPulseAt - next) < 0))
+        next = delayedPulseAt;
+    if (next == 0)
+        return;
+    int32_t delay = (int32_t)(next - now);
+    setIntervalFromNow(delay > 0 ? (unsigned long)delay : 0);
+}
+
+int32_t HapticFeedback::runOnce()
+{
+    uint32_t now = millis();
+
+    if (pulseOffAt != 0 && (int32_t)(now - pulseOffAt) >= 0) {
+        motorWrite(false);
+        pulseOffAt = 0;
+    }
+
+    if (delayedPulseAt != 0 && (int32_t)(now - delayedPulseAt) >= 0) {
+        uint16_t dur = delayedPulseDuration;
+        delayedPulseAt = 0;
+        pulse(dur);
+    }
+
+    uint32_t next = 0;
+    if (pulseOffAt != 0)
+        next = pulseOffAt;
+    if (delayedPulseAt != 0 && (next == 0 || (int32_t)(delayedPulseAt - next) < 0))
+        next = delayedPulseAt;
+    if (next == 0)
+        return 60 * 1000;
+    int32_t delay = (int32_t)(next - now);
+    return delay > 0 ? delay : 0;
+}
+
+#endif // HAPTIC_FEEDBACK_PIN

src/input/HapticFeedback.h

@@ -0,0 +1,35 @@
+#pragma once
+
+#include "configuration.h"
+
+#ifdef HAPTIC_FEEDBACK_PIN
+
+#include "concurrency/OSThread.h"
+#include <stdint.h>
+
+// Non-blocking pulses on a GPIO vibration motor. HAPTIC_FEEDBACK_ACTIVE_LOW inverts polarity.
+class HapticFeedback : public concurrency::OSThread
+{
+  public:
+    HapticFeedback();
+    void pulse(uint16_t durationMs = 30);
+    void armDelayedPulse(uint16_t delayMs, uint16_t durationMs = 30);
+    void cancelDelayedPulse();
+
+  protected:
+    int32_t runOnce() override;
+
+  private:
+    uint32_t pulseOffAt = 0;
+    uint32_t delayedPulseAt = 0;
+    uint16_t delayedPulseDuration = 0;
+
+    void motorWrite(bool on);
+    // Reschedule to the soonest pending event so later arms don't clobber earlier wakes.
+    void scheduleNext();
+};
+
+extern HapticFeedback *hapticFeedback;
+void initHapticFeedback();
+
+#endif // HAPTIC_FEEDBACK_PIN

src/input/InputBroker.cpp

@@ -2,6 +2,7 @@
 #include "PowerFSM.h" // needed for event trigger
 #include "configuration.h"
 #include "graphics/Screen.h"
+#include "input/HapticFeedback.h"
 #include "modules/ExternalNotificationModule.h"
 
 #if ARCH_PORTDUINO
@@ -237,6 +238,16 @@ void InputBroker::Init()
         }
         touchBacklightActive = false;
     };
+#endif
+#if defined(HAPTIC_FEEDBACK_PIN)
+    // Blip on touch, second blip when long-press fires (500 ms = touchConfig.longPressTime default).
+    touchConfig.suppressLeadUpSound = true;
+    initHapticFeedback();
+    touchConfig.onPress = []() {
+        hapticFeedback->pulse(80);
+        hapticFeedback->armDelayedPulse(500, 80);
+    };
+    touchConfig.onRelease = []() { hapticFeedback->cancelDelayedPulse(); };
 #endif
     TouchButtonThread->initButton(touchConfig);
 #endif

src/main.cpp

@@ -741,6 +741,11 @@ void setup()
         }
     }
 #endif
+#ifdef OLED_GEOMETRY_OVERRIDE
+    // Per-variant geometry (e.g. 72x40 micro-OLEDs). Takes precedence over the
+    // default GEOMETRY_128_64 set at the top of setup().
+    screen_geometry = OLED_GEOMETRY_OVERRIDE;
+#endif
 #endif
 
 #if !MESHTASTIC_EXCLUDE_I2C

src/mesh/NodeDB.cpp

@@ -836,7 +836,8 @@ void NodeDB::installDefaultModuleConfig()
     moduleConfig.has_store_forward = true;
     moduleConfig.has_telemetry = true;
     moduleConfig.has_external_notification = true;
-#if defined(PIN_BUZZER) || defined(PIN_VIBRATION) || defined(LED_NOTIFICATION) || defined(PCA_LED_NOTIFICATION)
+#if defined(PIN_BUZZER) || defined(PIN_VIBRATION) || defined(LED_NOTIFICATION) || defined(PCA_LED_NOTIFICATION) ||               \
+    defined(NEOPIXEL_STATUS_NOTIFICATION_PIN)
     moduleConfig.external_notification.enabled = true;
 #endif
 #if defined(PIN_BUZZER)
@@ -857,7 +858,7 @@ void NodeDB::installDefaultModuleConfig()
 #endif
 #if defined(PIN_VIBRATION)
     moduleConfig.external_notification.nag_timeout = 2;
-#elif defined(PIN_BUZZER) || defined(LED_NOTIFICATION)
+#elif defined(PIN_BUZZER) || defined(LED_NOTIFICATION) || defined(NEOPIXEL_STATUS_NOTIFICATION_PIN)
     moduleConfig.external_notification.nag_timeout = default_ringtone_nag_secs;
 #endif
 

src/mesh/PositionPrecision.cpp

@@ -0,0 +1,75 @@
+#include "PositionPrecision.h"
+#include "Channels.h"
+#include "mesh-pb-constants.h"
+
+#include <Arduino.h>
+
+uint32_t getPositionPrecisionForChannel(uint8_t channelIndex)
+{
+    const meshtastic_Channel &channel = channels.getByIndex(channelIndex);
+
+    if (channel.settings.has_module_settings) {
+        return channel.settings.module_settings.position_precision;
+    } else if (channel.role == meshtastic_Channel_Role_PRIMARY) {
+        return 32;
+    } else {
+        return 0;
+    }
+}
+
+static int32_t truncateCoordinate(int32_t coordinate, uint32_t precision)
+{
+    uint32_t coordinateBits = static_cast<uint32_t>(coordinate);
+    uint32_t truncated = coordinateBits & (UINT32_MAX << (32 - precision));
+
+    // Use the middle of the possible location, not the low edge of the bucket.
+    truncated += (1UL << (31 - precision));
+
+    return static_cast<int32_t>(truncated);
+}
+
+void applyPositionPrecision(meshtastic_Position &position, uint32_t precision)
+{
+    if (precision == 0) {
+        uint32_t time = position.time;
+        position = meshtastic_Position_init_default;
+        position.time = time;
+        return;
+    }
+
+    uint32_t effectivePrecision = precision > 32 ? 32 : precision;
+    position.precision_bits = effectivePrecision;
+
+    if (effectivePrecision < 32) {
+        position.latitude_i = truncateCoordinate(position.latitude_i, effectivePrecision);
+        position.longitude_i = truncateCoordinate(position.longitude_i, effectivePrecision);
+    }
+}
+
+bool applyPositionPrecision(meshtastic_MeshPacket &packet, uint32_t precision)
+{
+    if (packet.which_payload_variant != meshtastic_MeshPacket_decoded_tag ||
+        packet.decoded.portnum != meshtastic_PortNum_POSITION_APP) {
+        return true;
+    }
+
+    meshtastic_Position position = meshtastic_Position_init_default;
+    if (!pb_decode_from_bytes(packet.decoded.payload.bytes, packet.decoded.payload.size, &meshtastic_Position_msg, &position)) {
+        return false;
+    }
+
+    applyPositionPrecision(position, precision);
+    packet.decoded.payload.size = pb_encode_to_bytes(packet.decoded.payload.bytes, sizeof(packet.decoded.payload.bytes),
+                                                     &meshtastic_Position_msg, &position);
+    return true;
+}
+
+bool applyPositionPrecisionForChannel(meshtastic_MeshPacket &packet, uint8_t channelIndex)
+{
+    if (packet.which_payload_variant != meshtastic_MeshPacket_decoded_tag ||
+        packet.decoded.portnum != meshtastic_PortNum_POSITION_APP) {
+        return true;
+    }
+
+    return applyPositionPrecision(packet, getPositionPrecisionForChannel(channelIndex));
+}

src/mesh/PositionPrecision.h

@@ -0,0 +1,9 @@
+#pragma once
+
+#include "meshtastic/mesh.pb.h"
+#include <stdint.h>
+
+uint32_t getPositionPrecisionForChannel(uint8_t channelIndex);
+void applyPositionPrecision(meshtastic_Position &position, uint32_t precision);
+bool applyPositionPrecision(meshtastic_MeshPacket &packet, uint32_t precision);
+bool applyPositionPrecisionForChannel(meshtastic_MeshPacket &packet, uint8_t channelIndex);

src/mesh/Router.cpp

@@ -4,6 +4,7 @@
 #include "MeshRadio.h"
 #include "MeshService.h"
 #include "NodeDB.h"
+#include "PositionPrecision.h"
 #include "RTC.h"
 
 #include "configuration.h"
@@ -350,6 +351,11 @@ ErrorCode Router::send(meshtastic_MeshPacket *p)
     }
 
     fixPriority(p); // Before encryption, fix the priority if it's unset
+    if (!applyPositionPrecisionForChannel(*p, p->channel)) {
+        LOG_ERROR("Dropping malformed position packet before send");
+        packetPool.release(p);
+        return meshtastic_Routing_Error_BAD_REQUEST;
+    }
 
     // If the packet is not yet encrypted, do so now
     if (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) {

src/mesh/generated/meshtastic/admin.pb.cpp

@@ -15,6 +15,9 @@ PB_BIND(meshtastic_AdminMessage_InputEvent, meshtastic_AdminMessage_InputEvent,
 PB_BIND(meshtastic_AdminMessage_OTAEvent, meshtastic_AdminMessage_OTAEvent, AUTO)
 
 
+PB_BIND(meshtastic_LockdownAuth, meshtastic_LockdownAuth, AUTO)
+
+
 PB_BIND(meshtastic_HamParameters, meshtastic_HamParameters, AUTO)
 
 

src/mesh/generated/meshtastic/admin.pb.h

@@ -130,6 +130,41 @@ typedef struct _meshtastic_AdminMessage_OTAEvent {
     meshtastic_AdminMessage_OTAEvent_ota_hash_t ota_hash;
 } meshtastic_AdminMessage_OTAEvent;
 
+typedef PB_BYTES_ARRAY_T(32) meshtastic_LockdownAuth_passphrase_t;
+/* Lockdown passphrase delivery payload.
+
+ One message handles three operations distinguished by content:
+   - Provision (first-time): passphrase set, lock_now=false. Firmware
+     generates DEK, wraps with passphrase-derived KEK, persists.
+   - Unlock: passphrase set, lock_now=false. Firmware verifies
+     passphrase against stored DEK, unlocks storage, authorizes the
+     connection that delivered this packet.
+   - Lock now: lock_now=true, passphrase ignored. Firmware revokes
+     all client auth and reboots into the locked state.
+
+ Firmware decides between provision and unlock based on its own state
+ (whether a DEK file already exists). Clients do not need to track
+ which case applies. */
+typedef struct _meshtastic_LockdownAuth {
+    /* Passphrase bytes (1-32). Empty when lock_now is true.
+ Capped to 32 to match the proto cap on related security fields. */
+    meshtastic_LockdownAuth_passphrase_t passphrase;
+    /* Optional override of the boot-count token TTL granted on success.
+ 0 = use firmware default (TOKEN_DEFAULT_BOOTS).
+ On reboot the firmware decrements this; when it reaches 0 the
+ device boots fully locked and requires a fresh passphrase. */
+    uint32_t boots_remaining;
+    /* Optional wall-clock expiry for the unlock token, as absolute
+ Unix-epoch seconds. 0 = no time limit (only the boot-count TTL
+ applies). On boot, if the device RTC is set and now > this value,
+ the token is treated as expired. */
+    uint32_t valid_until_epoch;
+    /* If true, ignore passphrase fields, immediately revoke all
+ connection-level admin authorization, and reboot the device into
+ the locked state. Always honoured regardless of current lock state. */
+    bool lock_now;
+} meshtastic_LockdownAuth;
+
 /* Parameters for setting up Meshtastic for ameteur radio usage */
 typedef struct _meshtastic_HamParameters {
     /* Amateur radio call sign, eg. KD2ABC */
@@ -384,6 +419,15 @@ typedef struct _meshtastic_AdminMessage {
         meshtastic_AdminMessage_OTAEvent ota_request;
         /* Parameters and sensor configuration */
         meshtastic_SensorConfig sensor_config;
+        /* Lockdown passphrase delivery / unlock / lock-now command for hardened
+     firmware builds (see MESHTASTIC_LOCKDOWN). Used to provision the
+     passphrase on first boot, unlock encrypted storage on subsequent
+     reboots, re-verify on already-unlocked devices to authorize a new
+     client connection, or immediately re-lock the device.
+    
+     Replaces the earlier scheme that repurposed SecurityConfig.private_key
+     to carry passphrase bytes; that hack is retired. */
+        meshtastic_LockdownAuth lockdown_auth;
     };
     /* The node generates this key and sends it with any get_x_response packets.
  The client MUST include the same key with any set_x commands. Key expires after 300 seconds.
@@ -429,6 +473,7 @@ extern "C" {
 
 
 
+
 #define meshtastic_KeyVerificationAdmin_message_type_ENUMTYPE meshtastic_KeyVerificationAdmin_MessageType
 
 
@@ -441,6 +486,7 @@ extern "C" {
 #define meshtastic_AdminMessage_init_default     {0, {0}, {0, {0}}}
 #define meshtastic_AdminMessage_InputEvent_init_default {0, 0, 0, 0}
 #define meshtastic_AdminMessage_OTAEvent_init_default {_meshtastic_OTAMode_MIN, {0, {0}}}
+#define meshtastic_LockdownAuth_init_default     {{0, {0}}, 0, 0, 0}
 #define meshtastic_HamParameters_init_default    {"", 0, 0, ""}
 #define meshtastic_NodeRemoteHardwarePinsResponse_init_default {0, {meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default}}
 #define meshtastic_SharedContact_init_default    {0, false, meshtastic_User_init_default, 0, 0}
@@ -453,6 +499,7 @@ extern "C" {
 #define meshtastic_AdminMessage_init_zero        {0, {0}, {0, {0}}}
 #define meshtastic_AdminMessage_InputEvent_init_zero {0, 0, 0, 0}
 #define meshtastic_AdminMessage_OTAEvent_init_zero {_meshtastic_OTAMode_MIN, {0, {0}}}
+#define meshtastic_LockdownAuth_init_zero        {{0, {0}}, 0, 0, 0}
 #define meshtastic_HamParameters_init_zero       {"", 0, 0, ""}
 #define meshtastic_NodeRemoteHardwarePinsResponse_init_zero {0, {meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero}}
 #define meshtastic_SharedContact_init_zero       {0, false, meshtastic_User_init_zero, 0, 0}
@@ -470,6 +517,10 @@ extern "C" {
 #define meshtastic_AdminMessage_InputEvent_touch_y_tag 4
 #define meshtastic_AdminMessage_OTAEvent_reboot_ota_mode_tag 1
 #define meshtastic_AdminMessage_OTAEvent_ota_hash_tag 2
+#define meshtastic_LockdownAuth_passphrase_tag   1
+#define meshtastic_LockdownAuth_boots_remaining_tag 2
+#define meshtastic_LockdownAuth_valid_until_epoch_tag 3
+#define meshtastic_LockdownAuth_lock_now_tag     4
 #define meshtastic_HamParameters_call_sign_tag   1
 #define meshtastic_HamParameters_tx_power_tag    2
 #define meshtastic_HamParameters_frequency_tag   3
@@ -560,6 +611,7 @@ extern "C" {
 #define meshtastic_AdminMessage_nodedb_reset_tag 100
 #define meshtastic_AdminMessage_ota_request_tag  102
 #define meshtastic_AdminMessage_sensor_config_tag 103
+#define meshtastic_AdminMessage_lockdown_auth_tag 104
 #define meshtastic_AdminMessage_session_passkey_tag 101
 
 /* Struct field encoding specification for nanopb */
@@ -621,7 +673,8 @@ X(a, STATIC,   ONEOF,    INT32,    (payload_variant,factory_reset_config,factory
 X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,nodedb_reset,nodedb_reset), 100) \
 X(a, STATIC,   SINGULAR, BYTES,    session_passkey, 101) \
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,ota_request,ota_request), 102) \
-X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,sensor_config,sensor_config), 103)
+X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,sensor_config,sensor_config), 103) \
+X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,lockdown_auth,lockdown_auth), 104)
 #define meshtastic_AdminMessage_CALLBACK NULL
 #define meshtastic_AdminMessage_DEFAULT NULL
 #define meshtastic_AdminMessage_payload_variant_get_channel_response_MSGTYPE meshtastic_Channel
@@ -644,6 +697,7 @@ X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,sensor_config,sensor_config)
 #define meshtastic_AdminMessage_payload_variant_key_verification_MSGTYPE meshtastic_KeyVerificationAdmin
 #define meshtastic_AdminMessage_payload_variant_ota_request_MSGTYPE meshtastic_AdminMessage_OTAEvent
 #define meshtastic_AdminMessage_payload_variant_sensor_config_MSGTYPE meshtastic_SensorConfig
+#define meshtastic_AdminMessage_payload_variant_lockdown_auth_MSGTYPE meshtastic_LockdownAuth
 
 #define meshtastic_AdminMessage_InputEvent_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, UINT32,   event_code,        1) \
@@ -659,6 +713,14 @@ X(a, STATIC,   SINGULAR, BYTES,    ota_hash,          2)
 #define meshtastic_AdminMessage_OTAEvent_CALLBACK NULL
 #define meshtastic_AdminMessage_OTAEvent_DEFAULT NULL
 
+#define meshtastic_LockdownAuth_FIELDLIST(X, a) \
+X(a, STATIC,   SINGULAR, BYTES,    passphrase,        1) \
+X(a, STATIC,   SINGULAR, UINT32,   boots_remaining,   2) \
+X(a, STATIC,   SINGULAR, UINT32,   valid_until_epoch,   3) \
+X(a, STATIC,   SINGULAR, BOOL,     lock_now,          4)
+#define meshtastic_LockdownAuth_CALLBACK NULL
+#define meshtastic_LockdownAuth_DEFAULT NULL
+
 #define meshtastic_HamParameters_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, STRING,   call_sign,         1) \
 X(a, STATIC,   SINGULAR, INT32,    tx_power,          2) \
@@ -737,6 +799,7 @@ X(a, STATIC,   OPTIONAL, UINT32,   set_accuracy,      1)
 extern const pb_msgdesc_t meshtastic_AdminMessage_msg;
 extern const pb_msgdesc_t meshtastic_AdminMessage_InputEvent_msg;
 extern const pb_msgdesc_t meshtastic_AdminMessage_OTAEvent_msg;
+extern const pb_msgdesc_t meshtastic_LockdownAuth_msg;
 extern const pb_msgdesc_t meshtastic_HamParameters_msg;
 extern const pb_msgdesc_t meshtastic_NodeRemoteHardwarePinsResponse_msg;
 extern const pb_msgdesc_t meshtastic_SharedContact_msg;
@@ -751,6 +814,7 @@ extern const pb_msgdesc_t meshtastic_SHTXX_config_msg;
 #define meshtastic_AdminMessage_fields &meshtastic_AdminMessage_msg
 #define meshtastic_AdminMessage_InputEvent_fields &meshtastic_AdminMessage_InputEvent_msg
 #define meshtastic_AdminMessage_OTAEvent_fields &meshtastic_AdminMessage_OTAEvent_msg
+#define meshtastic_LockdownAuth_fields &meshtastic_LockdownAuth_msg
 #define meshtastic_HamParameters_fields &meshtastic_HamParameters_msg
 #define meshtastic_NodeRemoteHardwarePinsResponse_fields &meshtastic_NodeRemoteHardwarePinsResponse_msg
 #define meshtastic_SharedContact_fields &meshtastic_SharedContact_msg
@@ -768,6 +832,7 @@ extern const pb_msgdesc_t meshtastic_SHTXX_config_msg;
 #define meshtastic_AdminMessage_size             511
 #define meshtastic_HamParameters_size            31
 #define meshtastic_KeyVerificationAdmin_size     25
+#define meshtastic_LockdownAuth_size             48
 #define meshtastic_NodeRemoteHardwarePinsResponse_size 496
 #define meshtastic_SCD30_config_size             27
 #define meshtastic_SCD4X_config_size             29

src/mesh/generated/meshtastic/config.pb.h

@@ -198,7 +198,9 @@ typedef enum _meshtastic_Config_DisplayConfig_OledType {
     /* Can not be auto detected but set by proto. Used for 128x64 screens */
     meshtastic_Config_DisplayConfig_OledType_OLED_SH1107 = 3,
     /* Can not be auto detected but set by proto. Used for 128x128 screens */
-    meshtastic_Config_DisplayConfig_OledType_OLED_SH1107_128_128 = 4
+    meshtastic_Config_DisplayConfig_OledType_OLED_SH1107_128_128 = 4,
+    /* Can not be auto detected but set by proto. Used for 64x128 rotated screens */
+    meshtastic_Config_DisplayConfig_OledType_OLED_SH1107_ROTATED = 5
 } meshtastic_Config_DisplayConfig_OledType;
 
 typedef enum _meshtastic_Config_DisplayConfig_DisplayMode {
@@ -720,8 +722,8 @@ extern "C" {
 #define _meshtastic_Config_DisplayConfig_DisplayUnits_ARRAYSIZE ((meshtastic_Config_DisplayConfig_DisplayUnits)(meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL+1))
 
 #define _meshtastic_Config_DisplayConfig_OledType_MIN meshtastic_Config_DisplayConfig_OledType_OLED_AUTO
-#define _meshtastic_Config_DisplayConfig_OledType_MAX meshtastic_Config_DisplayConfig_OledType_OLED_SH1107_128_128
-#define _meshtastic_Config_DisplayConfig_OledType_ARRAYSIZE ((meshtastic_Config_DisplayConfig_OledType)(meshtastic_Config_DisplayConfig_OledType_OLED_SH1107_128_128+1))
+#define _meshtastic_Config_DisplayConfig_OledType_MAX meshtastic_Config_DisplayConfig_OledType_OLED_SH1107_ROTATED
+#define _meshtastic_Config_DisplayConfig_OledType_ARRAYSIZE ((meshtastic_Config_DisplayConfig_OledType)(meshtastic_Config_DisplayConfig_OledType_OLED_SH1107_ROTATED+1))
 
 #define _meshtastic_Config_DisplayConfig_DisplayMode_MIN meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT
 #define _meshtastic_Config_DisplayConfig_DisplayMode_MAX meshtastic_Config_DisplayConfig_DisplayMode_COLOR

src/mesh/generated/meshtastic/mesh.pb.cpp

@@ -57,6 +57,9 @@ PB_BIND(meshtastic_QueueStatus, meshtastic_QueueStatus, AUTO)
 PB_BIND(meshtastic_FromRadio, meshtastic_FromRadio, 2)
 
 
+PB_BIND(meshtastic_LockdownStatus, meshtastic_LockdownStatus, AUTO)
+
+
 PB_BIND(meshtastic_ClientNotification, meshtastic_ClientNotification, 2)
 
 
@@ -134,6 +137,8 @@ PB_BIND(meshtastic_ChunkedPayloadResponse, meshtastic_ChunkedPayloadResponse, AU
 
 
 
+
+
 
 
 

src/mesh/generated/meshtastic/mesh.pb.h

@@ -321,6 +321,10 @@ typedef enum _meshtastic_HardwareModel {
     meshtastic_HardwareModel_HELTEC_MESH_NODE_T1 = 133,
     /* B&Q Consulting Station G3: TBD */
     meshtastic_HardwareModel_STATION_G3 = 134,
+    /* Lilygo T-Impulse-Plus */
+    meshtastic_HardwareModel_T_IMPULSE_PLUS = 135,
+    /* Lilygo T-Echo Card */
+    meshtastic_HardwareModel_T_ECHO_CARD = 136,
     /* ------------------------------------------------------------------------------------------------------------------------------------------
  Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
  ------------------------------------------------------------------------------------------------------------------------------------------ */
@@ -638,6 +642,25 @@ typedef enum _meshtastic_LogRecord_Level {
     meshtastic_LogRecord_Level_TRACE = 5
 } meshtastic_LogRecord_Level;
 
+typedef enum _meshtastic_LockdownStatus_State {
+    /* Default; should not be sent. */
+    meshtastic_LockdownStatus_State_STATE_UNSPECIFIED = 0,
+    /* No passphrase has ever been provisioned on this device.
+ Client should prompt the operator to set one. */
+    meshtastic_LockdownStatus_State_NEEDS_PROVISION = 1,
+    /* Storage is locked or this client has not authenticated yet.
+ lock_reason carries a machine-readable detail string.
+ Client should present (or auto-replay) a passphrase via
+ AdminMessage.lockdown_auth. */
+    meshtastic_LockdownStatus_State_LOCKED = 2,
+    /* Passphrase accepted; client is now authorized for this connection.
+ boots_remaining and valid_until_epoch describe the active session
+ token's TTL. */
+    meshtastic_LockdownStatus_State_UNLOCKED = 3,
+    /* Passphrase rejected. backoff_seconds is non-zero when rate-limited. */
+    meshtastic_LockdownStatus_State_UNLOCK_FAILED = 4
+} meshtastic_LockdownStatus_State;
+
 /* Struct definitions */
 /* A GPS Position */
 typedef struct _meshtastic_Position {
@@ -1148,6 +1171,38 @@ typedef struct _meshtastic_QueueStatus {
     uint32_t mesh_packet_id;
 } meshtastic_QueueStatus;
 
+/* Lockdown state report from firmware to client (for hardened builds
+ with MESHTASTIC_LOCKDOWN). Sent immediately after config_complete_id
+ to inform a freshly-connected unauthorized client what it must do,
+ and again in response to each LockdownAuth admin command. */
+typedef struct _meshtastic_LockdownStatus {
+    /* Current lockdown state being reported. */
+    meshtastic_LockdownStatus_State state;
+    /* For LOCKED: machine-readable reason. Known values:
+   "needs_auth"        — storage already unlocked, client must auth
+   "token_missing"     — no boot token on flash
+   "token_expired"     — boot token wall-clock TTL elapsed
+   "token_boots_zero"  — boot token boot-count TTL exhausted
+   "token_hmac_fail"   — token tampered or wrong device
+   "token_dek_fail"    — token DEK decrypt failed
+   "token_wrong_size"  — token file corrupted
+   "token_bad_magic"   — token file corrupted
+   "not_provisioned"   — should generally use NEEDS_PROVISION state instead
+ Other values may be added; clients should treat unknown values as
+ "locked, ask for passphrase". */
+    char lock_reason[32];
+    /* For UNLOCKED: remaining boots on the issued session token.
+ Decrements by 1 on each subsequent boot. */
+    uint32_t boots_remaining;
+    /* For UNLOCKED: wall-clock expiry of the issued session token,
+ absolute Unix-epoch seconds. 0 = no time limit. */
+    uint32_t valid_until_epoch;
+    /* For UNLOCK_FAILED: seconds the client must wait before another
+ passphrase attempt will be accepted. 0 = wrong passphrase, no
+ backoff (immediate retry allowed but advisable to prompt user). */
+    uint32_t backoff_seconds;
+} meshtastic_LockdownStatus;
+
 typedef struct _meshtastic_KeyVerificationNumberInform {
     uint64_t nonce;
     char remote_longname[40];
@@ -1321,6 +1376,12 @@ typedef struct _meshtastic_FromRadio {
         meshtastic_ClientNotification clientNotification;
         /* Persistent data for device-ui */
         meshtastic_DeviceUIConfig deviceuiConfig;
+        /* Lockdown state notification for hardened firmware builds.
+     Sent post-config (so unauthorized clients learn they must
+     provision/unlock) and after each LockdownAuth admin command
+     to report success or failure. Replaces the earlier scheme of
+     encoding state as magic-string prefixes inside ClientNotification. */
+        meshtastic_LockdownStatus lockdown_status;
     };
 } meshtastic_FromRadio;
 
@@ -1462,6 +1523,10 @@ extern "C" {
 #define _meshtastic_LogRecord_Level_MAX meshtastic_LogRecord_Level_CRITICAL
 #define _meshtastic_LogRecord_Level_ARRAYSIZE ((meshtastic_LogRecord_Level)(meshtastic_LogRecord_Level_CRITICAL+1))
 
+#define _meshtastic_LockdownStatus_State_MIN meshtastic_LockdownStatus_State_STATE_UNSPECIFIED
+#define _meshtastic_LockdownStatus_State_MAX meshtastic_LockdownStatus_State_UNLOCK_FAILED
+#define _meshtastic_LockdownStatus_State_ARRAYSIZE ((meshtastic_LockdownStatus_State)(meshtastic_LockdownStatus_State_UNLOCK_FAILED+1))
+
 #define meshtastic_Position_location_source_ENUMTYPE meshtastic_Position_LocSource
 #define meshtastic_Position_altitude_source_ENUMTYPE meshtastic_Position_AltSource
 
@@ -1492,6 +1557,8 @@ extern "C" {
 
 
 
+#define meshtastic_LockdownStatus_state_ENUMTYPE meshtastic_LockdownStatus_State
+
 #define meshtastic_ClientNotification_level_ENUMTYPE meshtastic_LogRecord_Level
 
 
@@ -1532,6 +1599,7 @@ extern "C" {
 #define meshtastic_LogRecord_init_default        {"", 0, "", _meshtastic_LogRecord_Level_MIN}
 #define meshtastic_QueueStatus_init_default      {0, 0, 0, 0}
 #define meshtastic_FromRadio_init_default        {0, 0, {meshtastic_MeshPacket_init_default}}
+#define meshtastic_LockdownStatus_init_default   {_meshtastic_LockdownStatus_State_MIN, "", 0, 0, 0}
 #define meshtastic_ClientNotification_init_default {false, 0, 0, _meshtastic_LogRecord_Level_MIN, "", 0, {meshtastic_KeyVerificationNumberInform_init_default}}
 #define meshtastic_KeyVerificationNumberInform_init_default {0, "", 0}
 #define meshtastic_KeyVerificationNumberRequest_init_default {0, ""}
@@ -1566,6 +1634,7 @@ extern "C" {
 #define meshtastic_LogRecord_init_zero           {"", 0, "", _meshtastic_LogRecord_Level_MIN}
 #define meshtastic_QueueStatus_init_zero         {0, 0, 0, 0}
 #define meshtastic_FromRadio_init_zero           {0, 0, {meshtastic_MeshPacket_init_zero}}
+#define meshtastic_LockdownStatus_init_zero      {_meshtastic_LockdownStatus_State_MIN, "", 0, 0, 0}
 #define meshtastic_ClientNotification_init_zero  {false, 0, 0, _meshtastic_LogRecord_Level_MIN, "", 0, {meshtastic_KeyVerificationNumberInform_init_zero}}
 #define meshtastic_KeyVerificationNumberInform_init_zero {0, "", 0}
 #define meshtastic_KeyVerificationNumberRequest_init_zero {0, ""}
@@ -1718,6 +1787,11 @@ extern "C" {
 #define meshtastic_QueueStatus_free_tag          2
 #define meshtastic_QueueStatus_maxlen_tag        3
 #define meshtastic_QueueStatus_mesh_packet_id_tag 4
+#define meshtastic_LockdownStatus_state_tag      1
+#define meshtastic_LockdownStatus_lock_reason_tag 2
+#define meshtastic_LockdownStatus_boots_remaining_tag 3
+#define meshtastic_LockdownStatus_valid_until_epoch_tag 4
+#define meshtastic_LockdownStatus_backoff_seconds_tag 5
 #define meshtastic_KeyVerificationNumberInform_nonce_tag 1
 #define meshtastic_KeyVerificationNumberInform_remote_longname_tag 2
 #define meshtastic_KeyVerificationNumberInform_security_number_tag 3
@@ -1777,6 +1851,7 @@ extern "C" {
 #define meshtastic_FromRadio_fileInfo_tag        15
 #define meshtastic_FromRadio_clientNotification_tag 16
 #define meshtastic_FromRadio_deviceuiConfig_tag  17
+#define meshtastic_FromRadio_lockdown_status_tag 18
 #define meshtastic_Heartbeat_nonce_tag           1
 #define meshtastic_ToRadio_packet_tag            1
 #define meshtastic_ToRadio_want_config_id_tag    3
@@ -2017,7 +2092,8 @@ X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,metadata,metadata),  13) \
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,mqttClientProxyMessage,mqttClientProxyMessage),  14) \
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,fileInfo,fileInfo),  15) \
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,clientNotification,clientNotification),  16) \
-X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,deviceuiConfig,deviceuiConfig),  17)
+X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,deviceuiConfig,deviceuiConfig),  17) \
+X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,lockdown_status,lockdown_status),  18)
 #define meshtastic_FromRadio_CALLBACK NULL
 #define meshtastic_FromRadio_DEFAULT NULL
 #define meshtastic_FromRadio_payload_variant_packet_MSGTYPE meshtastic_MeshPacket
@@ -2034,6 +2110,16 @@ X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,deviceuiConfig,deviceuiConfi
 #define meshtastic_FromRadio_payload_variant_fileInfo_MSGTYPE meshtastic_FileInfo
 #define meshtastic_FromRadio_payload_variant_clientNotification_MSGTYPE meshtastic_ClientNotification
 #define meshtastic_FromRadio_payload_variant_deviceuiConfig_MSGTYPE meshtastic_DeviceUIConfig
+#define meshtastic_FromRadio_payload_variant_lockdown_status_MSGTYPE meshtastic_LockdownStatus
+
+#define meshtastic_LockdownStatus_FIELDLIST(X, a) \
+X(a, STATIC,   SINGULAR, UENUM,    state,             1) \
+X(a, STATIC,   SINGULAR, STRING,   lock_reason,       2) \
+X(a, STATIC,   SINGULAR, UINT32,   boots_remaining,   3) \
+X(a, STATIC,   SINGULAR, UINT32,   valid_until_epoch,   4) \
+X(a, STATIC,   SINGULAR, UINT32,   backoff_seconds,   5)
+#define meshtastic_LockdownStatus_CALLBACK NULL
+#define meshtastic_LockdownStatus_DEFAULT NULL
 
 #define meshtastic_ClientNotification_FIELDLIST(X, a) \
 X(a, STATIC,   OPTIONAL, UINT32,   reply_id,          1) \
@@ -2194,6 +2280,7 @@ extern const pb_msgdesc_t meshtastic_MyNodeInfo_msg;
 extern const pb_msgdesc_t meshtastic_LogRecord_msg;
 extern const pb_msgdesc_t meshtastic_QueueStatus_msg;
 extern const pb_msgdesc_t meshtastic_FromRadio_msg;
+extern const pb_msgdesc_t meshtastic_LockdownStatus_msg;
 extern const pb_msgdesc_t meshtastic_ClientNotification_msg;
 extern const pb_msgdesc_t meshtastic_KeyVerificationNumberInform_msg;
 extern const pb_msgdesc_t meshtastic_KeyVerificationNumberRequest_msg;
@@ -2230,6 +2317,7 @@ extern const pb_msgdesc_t meshtastic_ChunkedPayloadResponse_msg;
 #define meshtastic_LogRecord_fields &meshtastic_LogRecord_msg
 #define meshtastic_QueueStatus_fields &meshtastic_QueueStatus_msg
 #define meshtastic_FromRadio_fields &meshtastic_FromRadio_msg
+#define meshtastic_LockdownStatus_fields &meshtastic_LockdownStatus_msg
 #define meshtastic_ClientNotification_fields &meshtastic_ClientNotification_msg
 #define meshtastic_KeyVerificationNumberInform_fields &meshtastic_KeyVerificationNumberInform_msg
 #define meshtastic_KeyVerificationNumberRequest_fields &meshtastic_KeyVerificationNumberRequest_msg
@@ -2265,6 +2353,7 @@ extern const pb_msgdesc_t meshtastic_ChunkedPayloadResponse_msg;
 #define meshtastic_KeyVerificationNumberInform_size 58
 #define meshtastic_KeyVerificationNumberRequest_size 52
 #define meshtastic_KeyVerification_size          79
+#define meshtastic_LockdownStatus_size           53
 #define meshtastic_LogRecord_size                426
 #define meshtastic_LowEntropyKey_size            0
 #define meshtastic_MeshPacket_size               381

src/mesh/generated/meshtastic/module_config.pb.h

@@ -144,7 +144,7 @@ typedef struct _meshtastic_ModuleConfig_MQTTConfig {
  (the default official mqtt.meshtastic.org server can handle encrypted packets)
  Decrypted packets may be useful for external systems that want to consume meshtastic packets */
     bool encryption_enabled;
-    /* Whether to send / consume json packets on MQTT */
+    /* Deprecated: JSON packet support on MQTT was removed, and this field is ignored. */
     bool json_enabled;
     /* If true, we attempt to establish a secure connection using TLS */
     bool tls_enabled;

src/mesh/wifi/WiFiAPClient.cpp

@@ -291,10 +291,8 @@ static int32_t reconnectWiFi()
 #endif
         return 1000; // check once per second
     } else {
-#ifdef ARCH_RP2040
-        onNetworkConnected(); // will only do anything once
-#endif
-        return 300000; // every 5 minutes
+        onNetworkConnected(); // will only do anything once (guarded by APStartupComplete)
+        return 300000;        // every 5 minutes
     }
 }
 
@@ -343,9 +341,6 @@ bool initWifi()
         const char *wifiPsw = config.network.wifi_psk;
 
 #ifndef ARCH_RP2040
-#if !MESHTASTIC_EXCLUDE_WEBSERVER
-        createSSLCert(); // For WebServer
-#endif
         WiFi.persistent(false); // Disable flash storage for WiFi credentials
 #endif
         if (!*wifiPsw) // Treat empty password as no password
@@ -370,6 +365,9 @@ bool initWifi()
 #endif
             }
 #ifdef ARCH_ESP32
+            // Register WiFi event handler BEFORE createSSLCert() to prevent race condition:
+            // Without this, WiFi can auto-reconnect during cert generation and fire GOT_IP
+            // before the handler is registered, causing onNetworkConnected() to never run.
             WiFi.onEvent(WiFiEvent);
             WiFi.setAutoReconnect(true);
             WiFi.setSleep(false);
@@ -391,6 +389,12 @@ bool initWifi()
                     wifiDisconnectReason = info.wifi_sta_disconnected.reason;
                 },
                 WiFiEvent_t::ARDUINO_EVENT_WIFI_STA_DISCONNECTED);
+#endif
+
+#ifndef ARCH_RP2040
+#if !MESHTASTIC_EXCLUDE_WEBSERVER
+            createSSLCert(); // For WebServer - called after WiFi.onEvent() to avoid race condition
+#endif
 #endif
             LOG_DEBUG("JOINING WIFI soon: ssid=%s", wifiName);
             wifiReconnect = new Periodic("WifiConnect", reconnectWiFi);

src/modules/ExternalNotificationModule.cpp

@@ -206,6 +206,10 @@ void ExternalNotificationModule::setExternalState(uint8_t index, bool on)
 #ifdef PCA_LED_NOTIFICATION
         io.digitalWrite(PCA_LED_NOTIFICATION, on);
 
+#endif
+#ifdef NEOPIXEL_STATUS_NOTIFICATION_PIN
+        notificationPixel.setPixelColor(0, on ? NEOPIXEL_STATUS_NOTIFICATION_COLOR : 0);
+        notificationPixel.show();
 #endif
         break;
     }
@@ -324,6 +328,12 @@ ExternalNotificationModule::ExternalNotificationModule()
             LOG_INFO("Use Pin %i in digital mode", output);
             pinMode(output, OUTPUT);
         }
+#ifdef NEOPIXEL_STATUS_NOTIFICATION_PIN
+        LOG_INFO("Use WS2812 on GPIO %d as notification LED", NEOPIXEL_STATUS_NOTIFICATION_PIN);
+        notificationPixel.begin();
+        notificationPixel.clear();
+        notificationPixel.show();
+#endif
         setExternalState(0, false);
         externalTurnedOn[0] = 0;
         if (moduleConfig.external_notification.output_vibra) {

src/modules/ExternalNotificationModule.h

@@ -10,6 +10,19 @@
 extern AmbientLightingThread *ambientLightingThread;
 #endif
 
+// Drive a single WS2812 as the notification LED (M1/M2-style LED_NOTIFICATION
+// but addressable). A variant defines NEOPIXEL_STATUS_NOTIFICATION_PIN to
+// enable. Colour defaults to green but can be overridden.
+#ifdef NEOPIXEL_STATUS_NOTIFICATION_PIN
+#include <Adafruit_NeoPixel.h>
+#ifndef NEOPIXEL_STATUS_TYPE
+#define NEOPIXEL_STATUS_TYPE (NEO_GRB + NEO_KHZ800)
+#endif
+#ifndef NEOPIXEL_STATUS_NOTIFICATION_COLOR
+#define NEOPIXEL_STATUS_NOTIFICATION_COLOR 0x00FF00 // green
+#endif
+#endif
+
 #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !defined(CONFIG_IDF_TARGET_ESP32C6)
 #include <NonBlockingRtttl.h>
 #else
@@ -38,6 +51,10 @@ class ExternalNotificationModule : public SinglePortModule, private concurrency:
         CallbackObserver<ExternalNotificationModule, const InputEvent *>(this, &ExternalNotificationModule::handleInputEvent);
     uint32_t output = 0;
 
+#ifdef NEOPIXEL_STATUS_NOTIFICATION_PIN
+    Adafruit_NeoPixel notificationPixel = Adafruit_NeoPixel(1, NEOPIXEL_STATUS_NOTIFICATION_PIN, NEOPIXEL_STATUS_TYPE);
+#endif
+
   public:
     ExternalNotificationModule();
 

src/modules/PositionModule.cpp

@@ -4,6 +4,7 @@
 #include "GPS.h"
 #include "MeshService.h"
 #include "NodeDB.h"
+#include "PositionPrecision.h"
 #include "RTC.h"
 #include "Router.h"
 #include "TransmitHistory.h"
@@ -107,13 +108,7 @@ bool PositionModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, mes
     }
 
     nodeDB->updatePosition(getFrom(&mp), p);
-    if (channels.getByIndex(mp.channel).settings.has_module_settings) {
-        precision = channels.getByIndex(mp.channel).settings.module_settings.position_precision;
-    } else if (channels.getByIndex(mp.channel).role == meshtastic_Channel_Role_PRIMARY) {
-        precision = 32;
-    } else {
-        precision = 0;
-    }
+    precision = getPositionPrecisionForChannel(mp.channel);
 
     return false; // Let others look at this message also if they want
 }
@@ -121,15 +116,12 @@ bool PositionModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, mes
 void PositionModule::alterReceivedProtobuf(meshtastic_MeshPacket &mp, meshtastic_Position *p)
 {
     // Phone position packets need to be truncated to the channel precision
-    if (isFromUs(&mp) && (precision < 32 && precision > 0)) {
-        LOG_DEBUG("Truncate phone position to channel precision %i", precision);
-        p->latitude_i = p->latitude_i & (UINT32_MAX << (32 - precision));
-        p->longitude_i = p->longitude_i & (UINT32_MAX << (32 - precision));
-
-        // We want the imprecise position to be the middle of the possible location, not
-        p->latitude_i += (1 << (31 - precision));
-        p->longitude_i += (1 << (31 - precision));
-
+    if (isFromUs(&mp)) {
+        if (precision == 0)
+            LOG_DEBUG("Strip phone position due to channel precision 0");
+        else if (precision < 32)
+            LOG_DEBUG("Truncate phone position to channel precision %i", precision);
+        applyPositionPrecision(*p, precision);
         mp.decoded.payload.size =
             pb_encode_to_bytes(mp.decoded.payload.bytes, sizeof(mp.decoded.payload.bytes), &meshtastic_Position_msg, p);
     }
@@ -205,20 +197,11 @@ meshtastic_MeshPacket *PositionModule::allocPositionPacket()
 
     // lat/lon are unconditionally included - IF AVAILABLE!
     LOG_DEBUG("Send location with precision %i", precision);
-    if (precision < 32 && precision > 0) {
-        p.latitude_i = localPosition.latitude_i & (UINT32_MAX << (32 - precision));
-        p.longitude_i = localPosition.longitude_i & (UINT32_MAX << (32 - precision));
-
-        // We want the imprecise position to be the middle of the possible location, not
-        p.latitude_i += (1 << (31 - precision));
-        p.longitude_i += (1 << (31 - precision));
-    } else {
-        p.latitude_i = localPosition.latitude_i;
-        p.longitude_i = localPosition.longitude_i;
-    }
-    p.precision_bits = precision;
+    p.latitude_i = localPosition.latitude_i;
+    p.longitude_i = localPosition.longitude_i;
     p.has_latitude_i = true;
     p.has_longitude_i = true;
+    applyPositionPrecision(p, precision);
     // Always use NTP / GPS time if available
     if (getValidTime(RTCQualityNTP) > 0) {
         p.time = getValidTime(RTCQualityNTP);
@@ -349,8 +332,7 @@ void PositionModule::sendOurPosition()
     // If we changed channels, ask everyone else for their latest info
     LOG_INFO("Send pos@%x:6 to mesh (wantReplies=%d)", localPosition.timestamp, requestReplies);
     for (uint8_t channelNum = 0; channelNum < 8; channelNum++) {
-        if (channels.getByIndex(channelNum).settings.has_module_settings &&
-            channels.getByIndex(channelNum).settings.module_settings.position_precision != 0) {
+        if (getPositionPrecisionForChannel(channelNum) != 0) {
             sendOurPosition(NODENUM_BROADCAST, requestReplies, channelNum);
             return;
         }
@@ -368,10 +350,8 @@ void PositionModule::sendOurPosition(NodeNum dest, bool wantReplies, uint8_t cha
     if (prevPacketId) // if we wrap around to zero, we'll simply fail to cancel in that rare case (no big deal)
         service->cancelSending(prevPacketId);
 
-    // Set's the class precision value for this particular packet
-    if (channels.getByIndex(channel).settings.has_module_settings) {
-        precision = channels.getByIndex(channel).settings.module_settings.position_precision;
-    }
+    // Set the class precision value for this particular packet.
+    precision = getPositionPrecisionForChannel(channel);
 
     meshtastic_MeshPacket *p = allocPositionPacket();
     if (p == nullptr) {

src/modules/StatusLEDModule.cpp

@@ -17,8 +17,29 @@ StatusLEDModule::StatusLEDModule() : concurrency::OSThread("StatusLEDModule")
     if (inputBroker)
         inputObserver.observe(inputBroker);
 #endif
+#ifdef NEOPIXEL_STATUS_POWER_PIN
+    powerPixel.begin();
+    powerPixel.clear();
+    powerPixel.show();
+#endif
+#ifdef NEOPIXEL_STATUS_PAIRING_PIN
+    pairingPixel.begin();
+    pairingPixel.clear();
+    pairingPixel.show();
+#endif
 }
 
+// Helper: write a 1-pixel NeoPixel strand to `color` when stateOn, else clear.
+// Kept as a static inline here (rather than a member) so it compiles out
+// completely when no NeoPixel status pins are defined.
+#if defined(NEOPIXEL_STATUS_POWER_PIN) || defined(NEOPIXEL_STATUS_PAIRING_PIN)
+static inline void writeStatusPixel(Adafruit_NeoPixel &pixel, uint32_t color, bool stateOn)
+{
+    pixel.setPixelColor(0, stateOn ? color : 0);
+    pixel.show();
+}
+#endif
+
 int StatusLEDModule::handleStatusUpdate(const meshtastic::Status *arg)
 {
     switch (arg->getStatusType()) {
@@ -176,6 +197,12 @@ int32_t StatusLEDModule::runOnce()
 #ifdef LED_PAIRING
     digitalWrite(LED_PAIRING, PAIRING_LED_state);
 #endif
+#ifdef NEOPIXEL_STATUS_POWER_PIN
+    writeStatusPixel(powerPixel, NEOPIXEL_STATUS_POWER_COLOR, CHARGE_LED_state == LED_STATE_ON);
+#endif
+#ifdef NEOPIXEL_STATUS_PAIRING_PIN
+    writeStatusPixel(pairingPixel, NEOPIXEL_STATUS_PAIRING_COLOR, PAIRING_LED_state == LED_STATE_ON);
+#endif
 
 #ifdef RGB_LED_POWER
     if (!config.device.led_heartbeat_disabled) {
@@ -225,6 +252,12 @@ void StatusLEDModule::setPowerLED(bool LEDon)
 #ifdef LED_PAIRING
     digitalWrite(LED_PAIRING, ledState);
 #endif
+#ifdef NEOPIXEL_STATUS_POWER_PIN
+    writeStatusPixel(powerPixel, NEOPIXEL_STATUS_POWER_COLOR, LEDon);
+#endif
+#ifdef NEOPIXEL_STATUS_PAIRING_PIN
+    writeStatusPixel(pairingPixel, NEOPIXEL_STATUS_PAIRING_COLOR, LEDon);
+#endif
 
 #ifdef Battery_LED_1
     digitalWrite(Battery_LED_1, ledState);

src/modules/StatusLEDModule.h

@@ -13,6 +13,25 @@
 #include "input/InputBroker.h"
 #endif
 
+// WS2812/NeoPixel status-LED support. A variant may define
+//   NEOPIXEL_STATUS_POWER_PIN   (required to enable the power/charge pixel)
+//   NEOPIXEL_STATUS_POWER_COLOR (optional, default red 0xFF0000)
+//   NEOPIXEL_STATUS_PAIRING_PIN / _COLOR  (default blue 0x0000FF)
+// Each pixel is a standalone 1-LED strand on its own GPIO — this mirrors how
+// boards like the LilyGo T-Echo-Card expose three independent WS2812s.
+#if defined(NEOPIXEL_STATUS_POWER_PIN) || defined(NEOPIXEL_STATUS_PAIRING_PIN)
+#include <Adafruit_NeoPixel.h>
+#ifndef NEOPIXEL_STATUS_TYPE
+#define NEOPIXEL_STATUS_TYPE (NEO_GRB + NEO_KHZ800)
+#endif
+#ifndef NEOPIXEL_STATUS_POWER_COLOR
+#define NEOPIXEL_STATUS_POWER_COLOR 0xFF0000 // red
+#endif
+#ifndef NEOPIXEL_STATUS_PAIRING_COLOR
+#define NEOPIXEL_STATUS_PAIRING_COLOR 0x0000FF // blue
+#endif
+#endif
+
 class StatusLEDModule : private concurrency::OSThread
 {
     bool slowTrack = false;
@@ -27,6 +46,13 @@ class StatusLEDModule : private concurrency::OSThread
 
     void setPowerLED(bool);
 
+#ifdef NEOPIXEL_STATUS_POWER_PIN
+    Adafruit_NeoPixel powerPixel = Adafruit_NeoPixel(1, NEOPIXEL_STATUS_POWER_PIN, NEOPIXEL_STATUS_TYPE);
+#endif
+#ifdef NEOPIXEL_STATUS_PAIRING_PIN
+    Adafruit_NeoPixel pairingPixel = Adafruit_NeoPixel(1, NEOPIXEL_STATUS_PAIRING_PIN, NEOPIXEL_STATUS_TYPE);
+#endif
+
   protected:
     unsigned int my_interval = 1000; // interval in millisconds
     virtual int32_t runOnce() override;

src/nimble/NimbleBluetooth.cpp

@@ -610,7 +610,7 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
                 display->setTextAlignment(TEXT_ALIGN_CENTER);
                 display->setFont(FONT_MEDIUM);
                 display->drawString(x_offset + x, y_offset + y, "Bluetooth");
-#if !defined(M5STACK_UNITC6L)
+#if !defined(OLED_TINY)
                 display->setFont(FONT_SMALL);
                 y_offset = display->height() == 64 ? y_offset + FONT_HEIGHT_MEDIUM - 4 : y_offset + FONT_HEIGHT_MEDIUM + 5;
                 display->drawString(x_offset + x, y_offset + y, "Enter this code");

src/platform/esp32/architecture.h

@@ -158,6 +158,8 @@
 #define HW_VENDOR meshtastic_HardwareModel_CHATTER_2
 #elif defined(STATION_G2)
 #define HW_VENDOR meshtastic_HardwareModel_STATION_G2
+#elif defined(STATION_G3)
+#define HW_VENDOR meshtastic_HardwareModel_STATION_G3
 #elif defined(UNPHONE)
 #define HW_VENDOR meshtastic_HardwareModel_UNPHONE
 #elif defined(WIPHONE)

src/platform/extra_variants/m5stack_cardputer_adv/variant.cpp

@@ -1,13 +1,65 @@
-#include "AudioBoard.h"
 #include "configuration.h"
 
+#ifdef M5STACK_CARDPUTER_ADV
+
+#include "AudioBoard.h"
+#include <Wire.h>
+
 DriverPins PinsAudioBoardES8311;
 AudioBoard board(AudioDriverES8311, PinsAudioBoardES8311);
 
+// PI4IOE5V6408 on the optional Cap LoRa-1262 (and Cap LoRa868).
+#define PI4IO_ADDR 0x43
+#define PI4IO_REG_IO_DIR 0x03
+#define PI4IO_REG_OUT_SET 0x05
+#define PI4IO_REG_OUT_H_IM 0x07
+
+static TwoWire *findLoraCapBus()
+{
+    TwoWire *candidates[] = {&Wire1, &Wire};
+    for (size_t i = 0; i < sizeof(candidates) / sizeof(candidates[0]); ++i) {
+        candidates[i]->beginTransmission(PI4IO_ADDR);
+        if (candidates[i]->endTransmission() == 0) {
+            return candidates[i];
+        }
+    }
+    return nullptr;
+}
+
+static bool pi4ioWrite(TwoWire *bus, uint8_t reg, uint8_t val)
+{
+    bus->beginTransmission(PI4IO_ADDR);
+    bus->write(reg);
+    bus->write(val);
+    uint8_t status = bus->endTransmission();
+    if (status != 0) {
+        LOG_DEBUG("PI4IO write reg=0x%02x val=0x%02x failed, I2C status=%u", reg, val, status);
+        return false;
+    }
+    return true;
+}
+
+static void initLoraCap()
+{
+    TwoWire *bus = findLoraCapBus();
+    if (!bus) {
+        LOG_ERROR("Cap LoRa-1262 not found");
+        return;
+    }
+    bool ok = pi4ioWrite(bus, PI4IO_REG_IO_DIR, 0b00000001);
+    ok = ok && pi4ioWrite(bus, PI4IO_REG_OUT_H_IM, 0b00000000);
+    ok = ok && pi4ioWrite(bus, PI4IO_REG_OUT_SET, 0b00000001);
+    if (!ok) {
+        LOG_ERROR("Antenna switch init failed");
+    }
+}
+
 // M5stack Cardputer ADV specific init
 
 void lateInitVariant()
 {
+    initLoraCap();
+
     // AudioDriverLogger.begin(Serial, AudioDriverLogLevel::Debug);
     //  I2C: function, scl, sda
     PinsAudioBoardES8311.addI2C(PinFunction::CODEC, Wire);
@@ -38,3 +90,5 @@ void lateInitVariant()
     es8311_write_reg(0x32, 0xBF); // DAC volume (0dB)
     es8311_write_reg(0x37, 0x08); // EQ bypass
 }
+
+#endif

src/platform/nrf52/architecture.h

@@ -87,6 +87,8 @@
 #define HW_VENDOR meshtastic_HardwareModel_T_ECHO_LITE
 #elif defined(TTGO_T_ECHO_PLUS)
 #define HW_VENDOR meshtastic_HardwareModel_T_ECHO_PLUS
+#elif defined(T_IMPULSE_PLUS)
+#define HW_VENDOR meshtastic_HardwareModel_T_IMPULSE_PLUS
 #elif defined(ELECROW_ThinkNode_M1)
 #define HW_VENDOR meshtastic_HardwareModel_THINKNODE_M1
 #elif defined(ELECROW_ThinkNode_M3)

src/power/SGM41562.cpp

@@ -0,0 +1,109 @@
+#include "SGM41562.h"
+
+#ifdef HAS_SGM41562
+
+#include <Arduino.h>
+
+SGM41562 *sgm41562 = nullptr;
+
+bool initSGM41562(TwoWire &wire)
+{
+    if (sgm41562)
+        return true;
+    sgm41562 = new SGM41562();
+    if (!sgm41562->begin(wire)) {
+        delete sgm41562;
+        sgm41562 = nullptr;
+        return false;
+    }
+    return true;
+}
+
+bool SGM41562::readReg(uint8_t reg, uint8_t &value)
+{
+    wire_->beginTransmission(address_);
+    wire_->write(reg);
+    if (wire_->endTransmission(false) != 0)
+        return false;
+    if (wire_->requestFrom((int)address_, 1) != 1)
+        return false;
+    value = wire_->read();
+    return true;
+}
+
+bool SGM41562::writeReg(uint8_t reg, uint8_t value)
+{
+    wire_->beginTransmission(address_);
+    wire_->write(reg);
+    wire_->write(value);
+    return wire_->endTransmission() == 0;
+}
+
+bool SGM41562::updateReg(uint8_t reg, uint8_t mask, uint8_t value)
+{
+    uint8_t cur;
+    if (!readReg(reg, cur))
+        return false;
+    cur = (cur & ~mask) | (value & mask);
+    return writeReg(reg, cur);
+}
+
+bool SGM41562::begin(TwoWire &wire, uint8_t address)
+{
+    wire_ = &wire;
+    address_ = address;
+
+    uint8_t id;
+    if (!readReg(REG_DEVICE_ID, id)) {
+        LOG_WARN("SGM41562: I2C read failed at 0x%02X", address_);
+        return false;
+    }
+    if (id != DEVICE_ID_EXPECTED) {
+        LOG_WARN("SGM41562: unexpected device ID 0x%02X (expected 0x%02X)", id, DEVICE_ID_EXPECTED);
+        return false;
+    }
+    LOG_INFO("SGM41562: detected at 0x%02X (id 0x%02X)", address_, id);
+
+    // Mirror the vendor reference init sequence: PCB OTP off, NTC off,
+    // watchdog off, charger enabled. These match LilyGo's stock firmware
+    // for the T-Impulse Plus.
+    delay(120);
+    writeReg(REG_SYS_VOLTAGE_REG, 0xB7);
+    writeReg(REG_MISC_OP_CONTROL, 0x40);
+    writeReg(REG_CHARGE_TERM_TIMER, 0x1A);
+    writeReg(REG_POWER_ON_CFG, 0xA4);
+
+    return refresh();
+}
+
+bool SGM41562::refresh()
+{
+    uint32_t now = millis();
+    if (lastRefreshMs_ != 0 && (now - lastRefreshMs_) < 250)
+        return true; // cached
+    lastRefreshMs_ = now == 0 ? 1 : now;
+
+    uint8_t status, fault;
+    if (!readReg(REG_SYSTEM_STATUS, status))
+        return false;
+    if (!readReg(REG_FAULT, fault))
+        return false;
+
+    chargeStatus_ = static_cast<ChargeStatus>((status >> SYS_STATUS_CHRG_SHIFT) & SYS_STATUS_CHRG_MASK);
+    inputPowerGood_ = (status & SYS_STATUS_PG) != 0;
+    thermalReg_ = (status & SYS_STATUS_THERM_REG) != 0;
+    faultMask_ = fault & 0x3F; // bits [7:6] are enter_ship_time config, not faults
+    return true;
+}
+
+bool SGM41562::setChargeEnable(bool enable)
+{
+    return updateReg(REG_POWER_ON_CFG, POWER_ON_CFG_CHG_DISABLE, enable ? 0x00 : POWER_ON_CFG_CHG_DISABLE);
+}
+
+bool SGM41562::setShippingModeEnable(bool enable)
+{
+    return updateReg(REG_MISC_OP_CONTROL, MISC_OP_SHIPPING_MODE, enable ? MISC_OP_SHIPPING_MODE : 0x00);
+}
+
+#endif // HAS_SGM41562

src/power/SGM41562.h

@@ -0,0 +1,102 @@
+#pragma once
+
+#include "configuration.h"
+
+#ifdef HAS_SGM41562
+
+#include <Wire.h>
+#include <stdint.h>
+
+// SG Micro SGM41562 — single-cell Li-ion buck charger, I²C-controlled, no
+// fuel gauge. This driver exposes status (charging / input good / fault),
+// charge enable, and shipping-mode control. Battery voltage/percent still
+// come from the platform ADC path; the charger is plumbed in as a
+// side-channel for isCharging()/isVbusIn() in AnalogBatteryLevel.
+//
+// Reference: SGM41562 datasheet (Cmd map + bit fields cross-verified against
+// LilyGo's `Cpp_Bus_Driver::Sgm41562xx` driver, which is what their vendor
+// example for this board uses).
+
+#ifndef SGM41562_ADDR
+#define SGM41562_ADDR 0x03 // Per datasheet — unusual but correct
+#endif
+
+#ifndef SGM41562_WIRE
+#define SGM41562_WIRE Wire1 // Most boards put the PMU on the secondary bus
+#endif
+
+class SGM41562
+{
+  public:
+    enum class ChargeStatus : uint8_t {
+        NotCharging = 0b00,
+        Precharge = 0b01,
+        FastCharge = 0b10,
+        ChargeDone = 0b11,
+    };
+
+    bool begin(TwoWire &wire, uint8_t address = SGM41562_ADDR);
+
+    // Re-read the system status + fault registers. Throttled internally to
+    // at most one I²C transaction per 250 ms — call as often as you like.
+    bool refresh();
+
+    // Status — cached from the most recent refresh().
+    ChargeStatus chargeStatus() const { return chargeStatus_; }
+    bool isCharging() const { return chargeStatus_ == ChargeStatus::Precharge || chargeStatus_ == ChargeStatus::FastCharge; }
+    bool isChargeDone() const { return chargeStatus_ == ChargeStatus::ChargeDone; }
+    bool isInputPowerGood() const { return inputPowerGood_; }
+    bool isThermalRegulation() const { return thermalReg_; }
+    uint8_t faultMask() const { return faultMask_; }
+
+    // Control.
+    bool setChargeEnable(bool enable);
+    bool setShippingModeEnable(bool enable);
+
+  private:
+    TwoWire *wire_ = nullptr;
+    uint8_t address_ = SGM41562_ADDR;
+    uint32_t lastRefreshMs_ = 0;
+
+    ChargeStatus chargeStatus_ = ChargeStatus::NotCharging;
+    bool inputPowerGood_ = false;
+    bool thermalReg_ = false;
+    uint8_t faultMask_ = 0;
+
+    bool readReg(uint8_t reg, uint8_t &value);
+    bool writeReg(uint8_t reg, uint8_t value);
+    bool updateReg(uint8_t reg, uint8_t mask, uint8_t value);
+
+    // SGM41562 register addresses
+    static constexpr uint8_t REG_INPUT_SOURCE = 0x00;
+    static constexpr uint8_t REG_POWER_ON_CFG = 0x01;
+    static constexpr uint8_t REG_CHARGE_CURRENT = 0x02;
+    static constexpr uint8_t REG_DISCHARGE_TERM_CURRENT = 0x03;
+    static constexpr uint8_t REG_CHARGE_VOLTAGE = 0x04;
+    static constexpr uint8_t REG_CHARGE_TERM_TIMER = 0x05;
+    static constexpr uint8_t REG_MISC_OP_CONTROL = 0x06;
+    static constexpr uint8_t REG_SYS_VOLTAGE_REG = 0x07;
+    static constexpr uint8_t REG_SYSTEM_STATUS = 0x08;
+    static constexpr uint8_t REG_FAULT = 0x09;
+    static constexpr uint8_t REG_I2C_ADDR_MISC = 0x0A;
+    static constexpr uint8_t REG_DEVICE_ID = 0x0B;
+
+    // Bit positions in REG_POWER_ON_CFG.
+    static constexpr uint8_t POWER_ON_CFG_CHG_DISABLE = 0x08; // bit 3: 1 = charging disabled
+    // Bit positions in REG_MISC_OP_CONTROL.
+    static constexpr uint8_t MISC_OP_SHIPPING_MODE = 0x20; // bit 5: 1 = enter shipping mode
+    // Bit positions in REG_SYSTEM_STATUS.
+    static constexpr uint8_t SYS_STATUS_CHRG_SHIFT = 3;
+    static constexpr uint8_t SYS_STATUS_CHRG_MASK = 0x03;
+    static constexpr uint8_t SYS_STATUS_PG = 0x02;        // bit 1: input power good
+    static constexpr uint8_t SYS_STATUS_THERM_REG = 0x01; // bit 0: thermal regulation
+
+    static constexpr uint8_t DEVICE_ID_EXPECTED = 0x04;
+};
+
+extern SGM41562 *sgm41562;
+
+// Lazy-instantiate the global on the supplied wire. Returns true on success.
+bool initSGM41562(TwoWire &wire);
+
+#endif // HAS_SGM41562

test/test_position_precision/test_main.cpp

@@ -0,0 +1,100 @@
+#include "PositionPrecision.h"
+#include "TestUtil.h"
+#include "mesh-pb-constants.h"
+#include <unity.h>
+
+static meshtastic_Position makePosition()
+{
+    meshtastic_Position position = meshtastic_Position_init_default;
+    position.has_latitude_i = true;
+    position.latitude_i = static_cast<int32_t>(0x12345678);
+    position.has_longitude_i = true;
+    position.longitude_i = static_cast<int32_t>(0x22345678);
+    position.has_altitude = true;
+    position.altitude = 123;
+    position.time = 42;
+    position.location_source = meshtastic_Position_LocSource_LOC_EXTERNAL;
+    position.timestamp = 43;
+    position.sats_in_view = 10;
+    return position;
+}
+
+static void test_applyPositionPrecision_clampsLatLonAndSetsPrecisionBits()
+{
+    meshtastic_Position position = makePosition();
+
+    applyPositionPrecision(position, 16);
+
+    TEST_ASSERT_EQUAL_INT32(static_cast<int32_t>(0x12348000), position.latitude_i);
+    TEST_ASSERT_EQUAL_INT32(static_cast<int32_t>(0x22348000), position.longitude_i);
+    TEST_ASSERT_EQUAL_UINT32(16, position.precision_bits);
+    TEST_ASSERT_TRUE(position.has_latitude_i);
+    TEST_ASSERT_TRUE(position.has_longitude_i);
+}
+
+static void test_applyPositionPrecision_fullPrecisionKeepsLatLon()
+{
+    meshtastic_Position position = makePosition();
+
+    applyPositionPrecision(position, 32);
+
+    TEST_ASSERT_EQUAL_INT32(static_cast<int32_t>(0x12345678), position.latitude_i);
+    TEST_ASSERT_EQUAL_INT32(static_cast<int32_t>(0x22345678), position.longitude_i);
+    TEST_ASSERT_EQUAL_UINT32(32, position.precision_bits);
+}
+
+static void test_applyPositionPrecision_zeroScrubsLocationButKeepsTime()
+{
+    meshtastic_Position position = makePosition();
+
+    applyPositionPrecision(position, 0);
+
+    TEST_ASSERT_FALSE(position.has_latitude_i);
+    TEST_ASSERT_EQUAL_INT32(0, position.latitude_i);
+    TEST_ASSERT_FALSE(position.has_longitude_i);
+    TEST_ASSERT_EQUAL_INT32(0, position.longitude_i);
+    TEST_ASSERT_FALSE(position.has_altitude);
+    TEST_ASSERT_EQUAL_INT32(0, position.altitude);
+    TEST_ASSERT_EQUAL_UINT32(42, position.time);
+    TEST_ASSERT_EQUAL_UINT32(0, position.timestamp);
+    TEST_ASSERT_EQUAL_UINT32(0, position.sats_in_view);
+    TEST_ASSERT_EQUAL_UINT32(0, position.precision_bits);
+}
+
+static void test_applyPositionPrecision_reencodesPositionPacket()
+{
+    meshtastic_Position position = makePosition();
+    meshtastic_MeshPacket packet = meshtastic_MeshPacket_init_default;
+    packet.which_payload_variant = meshtastic_MeshPacket_decoded_tag;
+    packet.decoded.portnum = meshtastic_PortNum_POSITION_APP;
+    packet.decoded.payload.size = pb_encode_to_bytes(packet.decoded.payload.bytes, sizeof(packet.decoded.payload.bytes),
+                                                     &meshtastic_Position_msg, &position);
+
+    TEST_ASSERT_TRUE(applyPositionPrecision(packet, 16));
+
+    meshtastic_Position decoded = meshtastic_Position_init_default;
+    TEST_ASSERT_TRUE(
+        pb_decode_from_bytes(packet.decoded.payload.bytes, packet.decoded.payload.size, &meshtastic_Position_msg, &decoded));
+    TEST_ASSERT_EQUAL_INT32(static_cast<int32_t>(0x12348000), decoded.latitude_i);
+    TEST_ASSERT_EQUAL_INT32(static_cast<int32_t>(0x22348000), decoded.longitude_i);
+    TEST_ASSERT_EQUAL_UINT32(16, decoded.precision_bits);
+}
+
+void setUp(void) {}
+
+void tearDown(void) {}
+
+extern "C" {
+void setup()
+{
+    initializeTestEnvironment();
+    UNITY_BEGIN();
+    RUN_TEST(test_applyPositionPrecision_clampsLatLonAndSetsPrecisionBits);
+    RUN_TEST(test_applyPositionPrecision_fullPrecisionKeepsLatLon);
+    RUN_TEST(test_applyPositionPrecision_zeroScrubsLocationButKeepsTime);
+    RUN_TEST(test_applyPositionPrecision_reencodesPositionPacket);
+    exit(UNITY_END());
+}
+
+void loop() {}
+}

variants/esp32c6/m5stack_unitc6l/variant.cpp

@@ -52,23 +52,25 @@ void c6l_init()
     vTaskDelay(10 / portTICK_PERIOD_MS);
     i2c_read_byte(PI4IO_M_ADDR, PI4IO_REG_CHIP_RESET, &in_data);
     vTaskDelay(10 / portTICK_PERIOD_MS);
-    i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_IO_DIR, 0b11000000); // 0: input 1: output
+    i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_IO_DIR, 0b11100000); // P5,P6,P7 as outputs
     vTaskDelay(10 / portTICK_PERIOD_MS);
-    i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_OUT_H_IM, 0b00111100); // 使用到的引脚关闭High-Impedance
+    i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_OUT_H_IM, 0b00011100); // High-Impedance
     vTaskDelay(10 / portTICK_PERIOD_MS);
-    i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_PULL_SEL, 0b11000011); // pull up/down select, 0 down, 1 up
+    i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_PULL_SEL, 0b11100011); // pull up/down select, 0 down, 1 up
     vTaskDelay(10 / portTICK_PERIOD_MS);
-    i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_PULL_EN, 0b11000011); // pull up/down enable, 0 disable, 1 enable
+    i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_PULL_EN, 0b11100011); // pull up/down enable, 0 disable, 1 enable
     vTaskDelay(10 / portTICK_PERIOD_MS);
-    i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_IN_DEF_STA, 0b00000011); // P0 P1 默认高电平, 按键按下触发中断
+    i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_IN_DEF_STA, 0b00000011); // P0 P1 default to high level; button press triggers the interrupt
     vTaskDelay(10 / portTICK_PERIOD_MS);
-    i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_INT_MASK, 0b11111100); // P0 P1 中断使能 0 enable, 1 disable
+    i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_INT_MASK, 0b11111100); // P0 P1 interrupts enabled (0 = enable, 1 = disable)
     vTaskDelay(10 / portTICK_PERIOD_MS);
-    i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_OUT_SET, 0b10000000); // 默认输出为0
+    i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_OUT_SET, 0b10000000); // default output is 0
+    vTaskDelay(10 / portTICK_PERIOD_MS);
+    i2c_read_byte(PI4IO_M_ADDR, PI4IO_REG_IRQ_STA, &in_data); // read IRQ_STA to clear the flag
     vTaskDelay(10 / portTICK_PERIOD_MS);
-    i2c_read_byte(PI4IO_M_ADDR, PI4IO_REG_IRQ_STA, &in_data); // 读取IRQ_STA清除标志
 
     i2c_read_byte(PI4IO_M_ADDR, PI4IO_REG_OUT_SET, &in_data);
-    setbit(in_data, 6); // HIGH
+    setbit(in_data, 6); // enable SX_ANT_SW
+    setbit(in_data, 5); // enable SX_LNA_EN
     i2c_write_byte(PI4IO_M_ADDR, PI4IO_REG_OUT_SET, in_data);
 }

variants/esp32c6/m5stack_unitc6l/variant.h

@@ -48,6 +48,9 @@ void c6l_init();
 #define SSD1306_RESET 15
 // #define OLED_DG 1
 #endif
+// Tiny OLED panel — opts into compile-time layout/font/feature substitutions
+// gated on OLED_TINY across the graphics stack.
+#define OLED_TINY
 #define SCREEN_TRANSITION_FRAMERATE 10
 #define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
 

variants/esp32s3/m5stack_cardputer_adv/platformio.ini

@@ -10,9 +10,6 @@ build_flags =
   -D M5STACK_CARDPUTER_ADV
   -D ARDUINO_USB_CDC_ON_BOOT=1
   -I variants/esp32s3/m5stack_cardputer_adv
-build_src_filter =
-  ${esp32s3_base.build_src_filter}
-  +<../variants/esp32s3/m5stack_cardputer_adv>
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=git-refs depName=meshtastic-st7789 packageName=https://github.com/meshtastic/st7789 gitBranch=main

variants/esp32s3/m5stack_cardputer_adv/variant.h

@@ -9,6 +9,7 @@
 #define ST7789_BUSY -1
 // #define VTFT_CTRL 38
 #define VTFT_LEDA 38
+#define TFT_BACKLIGHT_ON HIGH
 // #define ST7789_BL (32+6)
 #define ST7789_SPI_HOST SPI2_HOST
 // #define TFT_BL (32+6)

variants/esp32s3/station-common/station_common.h

@@ -0,0 +1,38 @@
+// Shared pin/feature defines for BQ Station G2 and G3.
+// Boards differ only in PA output power (SX126X_MAX_POWER) and the wiki URL.
+#pragma once
+
+// Station G2/G3 may not have GPS installed, but have a GROVE GPS Socket for an optional GPS module
+#define GPS_RX_PIN 7
+#define GPS_TX_PIN 15
+
+// 1.3 inch OLED Screen
+#define USE_SH1107_128_64
+
+#define I2C_SDA 5
+#define I2C_SCL 6
+
+#define BUTTON_PIN 38 // Program button
+#define BUTTON_NEED_PULLUP
+
+#define USE_SX1262
+
+#define LORA_MISO 14
+#define LORA_SCK 12
+#define LORA_MOSI 13
+#define LORA_CS 11
+
+#define LORA_RESET 21
+#define LORA_DIO1 48
+
+#ifdef USE_SX1262
+#define SX126X_CS LORA_CS // Compatibility alias; prefer LORA_CS in board definitions.
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY 47
+#define SX126X_RESET LORA_RESET
+
+// DIO2 controls an antenna switch and the TCXO voltage is controlled by DIO3
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+// NOTE: SX126X_MAX_POWER is intentionally NOT defined here — each board sets it.
+#endif

variants/esp32s3/station-g2/platformio.ini

@@ -22,10 +22,11 @@ upload_speed = 921600
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=0
-build_flags = 
+build_flags =
   ${esp32s3_base.build_flags}
   -D STATION_G2
   -I variants/esp32s3/station-g2
+  -I variants/esp32s3/station-common
   -DBOARD_HAS_PSRAM
   -DSTATION_G2
   -DARDUINO_USB_MODE=1

variants/esp32s3/station-g2/variant.h

@@ -2,39 +2,9 @@
 Board Information: https://wiki.uniteng.com/en/meshtastic/station-g2
 */
 
-// Station G2 may not have GPS installed, but it has a GROVE GPS Socket for Optional GPS Module
-#define GPS_RX_PIN 7
-#define GPS_TX_PIN 15
-
-// Station G2 has 1.3 inch OLED Screen
-#define USE_SH1107_128_64
-
-#define I2C_SDA 5 // I2C pins for this board
-#define I2C_SCL 6
-
-#define BUTTON_PIN 38 // This is the Program Button
-#define BUTTON_NEED_PULLUP
-
-#define USE_SX1262
-
-#define LORA_MISO 14
-#define LORA_SCK 12
-#define LORA_MOSI 13
-#define LORA_CS 11
-
-#define LORA_RESET 21
-#define LORA_DIO1 48
+#include "station_common.h"
 
 #ifdef USE_SX1262
-#define SX126X_CS LORA_CS // FIXME - we really should define LORA_CS instead
-#define SX126X_DIO1 LORA_DIO1
-#define SX126X_BUSY 47
-#define SX126X_RESET LORA_RESET
-
-//  DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
-#define SX126X_DIO2_AS_RF_SWITCH
-#define SX126X_DIO3_TCXO_VOLTAGE 1.8
-
 // Ensure the PA does not exceed the saturation output power. More
 // Info:https://wiki.uniteng.com/en/meshtastic/station-g2#summary-for-lora-power-amplifier-conduction-test
 #define SX126X_MAX_POWER 19

variants/esp32s3/station-g3/pins_arduino.h

@@ -0,0 +1,21 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// GPIO48 Reference: https://github.com/espressif/arduino-esp32/pull/8600
+
+// The default Wire will be mapped to Screen and Sensors
+static const uint8_t SDA = 5;
+static const uint8_t SCL = 6;
+
+// Default SPI will be mapped to Radio
+static const uint8_t MISO = 14;
+static const uint8_t SCK = 12;
+static const uint8_t MOSI = 13;
+static const uint8_t SS = 11;
+
+#endif /* Pins_Arduino_h */

variants/esp32s3/station-g3/platformio.ini

@@ -0,0 +1,32 @@
+[env:station-g3]
+custom_meshtastic_hw_model = 134
+custom_meshtastic_hw_model_slug = STATION_G3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 2
+custom_meshtastic_display_name = Station G3
+custom_meshtastic_images = station-g3.svg
+custom_meshtastic_tags = B&Q
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
+extends = esp32s3_base
+board = station-g3
+board_level = pr
+board_check = true
+board_build.partitions = default_16MB.csv
+board_build.mcu = esp32s3
+upload_protocol = esptool
+;upload_port = /dev/ttyACM0
+upload_speed = 921600
+build_unflags =
+  ${esp32s3_base.build_unflags}
+  -DARDUINO_USB_MODE=0
+build_flags =
+  ${esp32s3_base.build_flags}
+  -D STATION_G3
+  -I variants/esp32s3/station-g3
+  -I variants/esp32s3/station-common
+  -DBOARD_HAS_PSRAM
+  -DSTATION_G3
+  -DARDUINO_USB_MODE=1

variants/esp32s3/station-g3/variant.h

@@ -0,0 +1,22 @@
+#include "station_common.h"
+
+#ifdef USE_SX1262
+// Station G3 reuses the same Fast-Transient DC-DC PA design as G2 (BQ35LORA900V1M).
+// PA Operating Mode is set in hardware via the PA-PL1 / PA-PL2 jumpers.
+// 19 matches the G2 cap (SX1262 19 dBm in → ~31 dBm PA out at Power Level 1, ISM compliant).
+// Raise (max 22) only if running a higher PA Power Level and you can stay within local band limits.
+#define SX126X_MAX_POWER 19
+#endif
+
+/*
+#define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
+#define ADC_MULTIPLIER 4
+#define BATTERY_SENSE_SAMPLES 15 // Set the number of samples, It has an effect of increasing sensitivity.
+#define BAT_FULLVOLT 8400
+#define BAT_EMPTYVOLT 5000
+#define BAT_CHARGINGVOLT 8400
+#define BAT_NOBATVOLT 4460
+#define CELL_TYPE_LION // same curve for liion/lipo
+#define NUM_CELLS 2
+*/

variants/native/portduino.ini

@@ -29,7 +29,7 @@ lib_deps =
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
   lovyan03/LovyanGFX@1.2.21
   ; # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
-  https://github.com/pine64/libch341-spi-userspace/archive/23c42319a69cffcb65868e3c72e6bed83974a393.zip
+  https://github.com/pine64/libch341-spi-userspace/archive/2e5ff751d0c39667993df672cb683740ed5c9394.zip
   # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
 	adafruit/Adafruit seesaw Library@1.7.9
   # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main

variants/nrf52840/t-echo-card/platformio.ini

@@ -0,0 +1,12 @@
+[env:t-echo-card]
+extends = nrf52840_base
+board = t-echo
+board_level = extra
+debug_tool = jlink
+
+build_flags = ${nrf52840_base.build_flags}
+  -I variants/nrf52840/t-echo-card
+  -D PRIVATE_HW
+  -D T_ECHO_CARD
+
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/t-echo-card>

variants/nrf52840/t-echo-card/variant.cpp

@@ -0,0 +1,66 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include "variant.h"
+#include "Arduino.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+    // P0 - pins 0 and 1 are hardwired for xtal and should never be enabled
+    0xff, 0xff, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+
+    // P1
+    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
+
+void initVariant()
+{
+    // No plain GPIO LEDs on this board (only WS2812 addressable LEDs, not driven here).
+}
+
+// Reproduces the vendor firmware's boot sequence from
+// examples/original_test/original_test.ino. Runs before Meshtastic touches
+// PIN_POWER_EN, so the RT9080 LDO gets a clean reset pulse and peripherals
+// whose EN pins must be LOW at boot (GPS_EN, GPS_RF_EN, BUZZER) aren't left
+// floating while the 3V3 rail is ramping.
+void earlyInitVariant()
+{
+    // 3.3V rail: toggle RT9080_EN HIGH → LOW → HIGH with 100 ms dwell so the
+    // LDO enters enable from a known state. The single-shot HIGH in main.cpp
+    // is not enough on this hardware — if the chip was in a half-enabled
+    // state from a previous reset, the rail brown-outs once LoRa TX fires.
+    pinMode(PIN_POWER_EN, OUTPUT);
+    digitalWrite(PIN_POWER_EN, HIGH);
+    delay(100);
+    digitalWrite(PIN_POWER_EN, LOW);
+    delay(100);
+    digitalWrite(PIN_POWER_EN, HIGH);
+    delay(100);
+
+    // Park peripherals with active-high enables LOW so they don't sink
+    // current while the rest of setup() runs.
+    pinMode(PIN_GPS_STANDBY, OUTPUT);
+    digitalWrite(PIN_GPS_STANDBY, LOW);
+    pinMode(PIN_GPS_RESET, OUTPUT);
+    digitalWrite(PIN_GPS_RESET, LOW);
+    pinMode(PIN_BUZZER, OUTPUT);
+    digitalWrite(PIN_BUZZER, LOW);
+}

variants/nrf52840/t-echo-card/variant.h

@@ -0,0 +1,202 @@
+// Variant definition for LilyGo T-Echo-Card (nRF52840)
+
+#ifndef _VARIANT_T_ECHO_CARD_
+#define _VARIANT_T_ECHO_CARD_
+
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+#define USE_LFXO // Board uses 32kHz crystal for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+// Number of pins defined in PinDescription array
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (1)
+#define NUM_ANALOG_OUTPUTS (0)
+
+// LEDs - board only exposes 3x WS2812 addressable LEDs. No plain GPIO LEDs.
+// Intentionally do not define PIN_LED1 on this variant, so nRF52 platform
+// code does not auto-enable a nonexistent GPIO power/status LED.
+#define LED_STATE_ON 1
+
+// Three independent WS2812 data lines (one LED per line, not a daisy chain).
+// Each is driven as a 1-pixel NeoPixel by StatusLEDModule / ExternalNotification,
+// assigns LED_POWER (red) and LED_NOTIFICATION (green).
+#define WS2812_DATA_1 (32 + 7)  // P1.7  - charge/heartbeat (red)
+#define WS2812_DATA_2 (32 + 12) // P1.12 - external notification (green)
+#define WS2812_DATA_3 (0 + 28)  // P0.28 - BLE pairing (blue)
+
+// Wire each WS2812 to a status role. Colour defaults are scaled to 25%
+// brightness (0x40) — the bare-die WS2812s on this board are very bright at
+// full intensity in a close-range enclosure.
+#define NEOPIXEL_STATUS_POWER_PIN WS2812_DATA_1
+#define NEOPIXEL_STATUS_NOTIFICATION_PIN WS2812_DATA_2
+#define NEOPIXEL_STATUS_PAIRING_PIN WS2812_DATA_3
+#define NEOPIXEL_STATUS_POWER_COLOR 0x400000        // red   @ 25%
+#define NEOPIXEL_STATUS_NOTIFICATION_COLOR 0x004000 // green @ 25%
+#define NEOPIXEL_STATUS_PAIRING_COLOR 0x000040      // blue  @ 25%
+
+// The charger IC does not blink on its own; let StatusLEDModule do the
+// software blink while charging
+// If left defined: hardware would be expected to handle the charging pulse.
+// #define POWER_LED_HARDWARE_BLINKS_WHILE_CHARGING
+
+// Buttons
+#define PIN_BUTTON1 (32 + 10) // KEY_1: P1.10
+
+#define BUTTON_CLICK_MS 400
+
+// Analog pins
+#define PIN_A0 (0 + 2) // Battery ADC (BATTERY_ADC_DATA)
+
+#define BATTERY_PIN PIN_A0
+
+static const uint8_t A0 = PIN_A0;
+
+#define ADC_RESOLUTION 14
+
+// BATTERY_MEASUREMENT_CONTROL - enable divider for battery reading
+#define ADC_CTRL (0 + 31)
+#define ADC_CTRL_ENABLED HIGH
+
+// NFC placeholders, not used
+#define PIN_NFC1 (9)
+#define PIN_NFC2 (10)
+
+// Wire Interfaces (IIC_1 on the vendor header)
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_WIRE_SDA (32 + 4) // IIC_1_SDA: P1.4
+#define PIN_WIRE_SCL (32 + 2) // IIC_1_SCL: P1.2
+
+// External serial flash ZD25WQ32CEIGR
+// QSPI Pins
+#define PIN_QSPI_SCK (0 + 4)
+#define PIN_QSPI_CS (0 + 12)
+#define PIN_QSPI_IO0 (0 + 6)  // MOSI if using two bit interface
+#define PIN_QSPI_IO1 (0 + 8)  // MISO if using two bit interface
+#define PIN_QSPI_IO2 (32 + 9) // WP
+#define PIN_QSPI_IO3 (0 + 26) // HOLD
+
+// On-board QSPI Flash
+#define EXTERNAL_FLASH_DEVICES ZD25WQ32CEIGR
+#define EXTERNAL_FLASH_USE_QSPI
+
+// Lora S62F (SX1262)
+#define USE_SX1262
+#define SX126X_CS (0 + 11)
+#define SX126X_DIO1 (32 + 8)
+#define SX126X_DIO2 (0 + 5)
+#define SX126X_BUSY (0 + 14)
+#define SX126X_RESET (0 + 7)
+#define SX126X_RXEN (32 + 1) // SX1262_RF_VC2
+#define SX126X_TXEN (0 + 27) // SX1262_RF_VC1
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+// ───────────────────────────────────────────────────────────────────────────
+// OLED display: SSD1315 on I2C @ 0x3C (IIC_1). SSD1315 is register-compatible
+// with SSD1306, so USE_SSD1306 initializes the controller correctly.
+//
+// Viewport: the physical panel is 72×40, mapped into the SSD1315's 128×64
+// GDDRAM at columns 28..99, pages 3..7 (rows 24..63). The firmware handles
+// this by:
+//   * asking the library for GEOMETRY_72_40, which sets the framebuffer to
+//     72×40 and emits the right SETMULTIPLEX (39) / SETCOMPINS at init;
+//   * relying on SSD1306Wire's built-in horizontal auto-centering
+//     ((128 - width) / 2 = 28), so no horizontal shim is needed;
+//   * calling SSD1306Wire::setYOffset(3) in Screen.cpp when
+//     OLED_Y_OFFSET_PAGES is defined — this shifts every PAGEADDR write by
+//     three pages (24 rows) so data lands on the visible rows.
+// ───────────────────────────────────────────────────────────────────────────
+#define HAS_SCREEN 1
+#define USE_SSD1306
+#define OLED_GEOMETRY_OVERRIDE GEOMETRY_72_40
+#define OLED_Y_OFFSET_PAGES 3
+#define OLED_TINY
+
+// Controls power 3V3 for all peripherals (GPS + LoRa + Sensor)
+#define PIN_POWER_EN (0 + 30) // RT9080_EN
+
+// SPI1 is unused (no external SPI display). Keep declarations for the core.
+#define PIN_SPI1_MISO (-1)
+#define PIN_SPI1_MOSI (-1)
+#define PIN_SPI1_SCK (-1)
+
+// GPS pins
+#define GPS_L76K
+#define GPS_BAUDRATE 9600
+#define HAS_GPS 1
+
+#define PIN_GPS_EN (32 + 15) // GPS_EN: P1.15 - GPS power enable
+#define GPS_EN_ACTIVE 1
+#define PIN_GPS_STANDBY (0 + 25) // GPS_WAKE_UP: P0.25 - wakeup pin
+#define PIN_GPS_PPS (0 + 23)     // GPS_1PPS: P0.23
+#define GPS_RX_PIN (0 + 19)      // MCU RX ← GPS's TX (vendor GPS_UART_TX / P0.19)
+#define GPS_TX_PIN (0 + 21)      // MCU TX → GPS's RX (vendor GPS_UART_RX / P0.21)
+#define PIN_GPS_RESET (0 + 29)   // GPS_RF_EN: GPS RF enable / reset
+
+#define GPS_THREAD_INTERVAL 50
+
+#define PIN_SERIAL1_RX GPS_RX_PIN
+#define PIN_SERIAL1_TX GPS_TX_PIN
+
+// SPI Interfaces (LoRa on SPI0)
+#define SPI_INTERFACES_COUNT 2
+
+// For LORA, SPI 0
+#define PIN_SPI_MISO (0 + 17)
+#define PIN_SPI_MOSI (0 + 15)
+#define PIN_SPI_SCK (0 + 13)
+
+// Battery
+// The battery sense is hooked to PIN_A0 (P0.2) via a divider controlled by ADC_CTRL.
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER (2.0F)
+
+// Buzzer (PWM output, passive piezo)
+#define PIN_BUZZER (32 + 6) // BUZZER_DATA: P1.6
+
+// ───────────────────────────────────────────────────────────────────────────
+// I²S speaker (MAX98357 Class-D amp). Stereo I²S data path.
+// Not supported on nrf52. These defines exist for out-of-tree code only.
+// ───────────────────────────────────────────────────────────────────────────
+#define SPEAKER_EN (32 + 11)     // P1.11 - amp main enable
+#define SPEAKER_EN_2 (0 + 3)     // P0.3  - secondary enable (vendor firmware toggles both)
+#define SPEAKER_BCLK (0 + 16)    // P0.16 - I2S bit clock
+#define SPEAKER_DATA (0 + 20)    // P0.20 - I2S data (SDOUT)
+#define SPEAKER_WS_LRCK (0 + 22) // P0.22 - I2S word select / LRCK
+
+// ───────────────────────────────────────────────────────────────────────────
+// PDM microphone (ST MP34DT05).
+// TODO to enable a mic path:
+// Use Adafruit nRF52 core's built-in PDM.h wrapper (Arduino-compatible
+// API exists on nRF52840). Clock on MIC_SCLK, data on MIC_DATA.
+// ───────────────────────────────────────────────────────────────────────────
+#define MIC_SCLK (32 + 3) // P1.3 - PDM clock (MIC_SCLK on vendor header)
+#define MIC_DATA (32 + 5) // P1.5 - PDM data (MIC_DATA on vendor header)
+
+#define SERIAL_PRINT_PORT 0
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#endif

variants/nrf52840/t-impulse-plus/platformio.ini

@@ -0,0 +1,9 @@
+[env:t-impulse-plus]
+extends = nrf52840_base
+board = t-impulse-plus
+
+build_flags = ${nrf52840_base.build_flags}
+  -I variants/nrf52840/t-impulse-plus
+  -D T_IMPULSE_PLUS
+
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/t-impulse-plus>

variants/nrf52840/t-impulse-plus/variant.cpp

@@ -0,0 +1,91 @@
+/*
+ * variant.cpp - Digital pin mapping for LilyGo T-Impulse Plus
+ *
+ * Board: T-Impulse Plus V1.0 (nRF52840)
+ * Hardware:
+ * - SSD1315 OLED
+ * - SX1262 (S62F)
+ * - MIA-M10Q GPS
+ * - ICM20948 IMU
+ * - ZD25WQ32C Flash
+ * - TTP223 Touch Button
+ * - Vibration Motor
+ */
+
+#include "variant.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+extern "C" {
+const uint32_t g_ADigitalPinMap[] = {
+    // D0-D6: LoRa SX1262 (S62F module) SPI + control
+    2,  // D0  P0.02  SX1262_RST
+    29, // D1  P0.29  SX1262_DIO1
+    31, // D2  P0.31  SX1262_BUSY
+    46, // D3  P1.14  SX1262_CS
+    3,  // D4  P0.03  SPI_SCK
+    30, // D5  P0.30  SPI_MISO
+    28, // D6  P0.28  SPI_MOSI
+
+    // D7-D8: RF switch control
+    45, // D7  P1.13  SX1262_RF_VC1 (TXEN)
+    39, // D8  P1.07  SX1262_RF_VC2 (RXEN)
+
+    // D9-D11: GPS (u-blox MIA-M10Q)
+    44, // D9  P1.12  GPS_TX (MCU TX -> GPS RX)
+    43, // D10 P1.11  GPS_RX (MCU RX <- GPS TX)
+    42, // D11 P1.10  GPS_EN
+
+    // D12-D13: Display I2C (SSD1315)
+    20, // D12 P0.20  SCREEN_SDA
+    15, // D13 P0.15  SCREEN_SCL
+
+    // D14-D15: Sensor I2C (ICM20948, SGM41562)
+    40, // D14 P1.08  IMU_SDA
+    11, // D15 P0.11  IMU_SCL
+
+    // D16-D17: Battery management
+    5,  // D16 P0.05  BATTERY_ADC
+    25, // D17 P0.25  BATTERY_MEASUREMENT_CONTROL
+
+    // D18: Touch button (TTP223)
+    36, // D18 P1.04  TTP223_KEY
+
+    // D19: Vibration motor
+    22, // D19 P0.22  VIBRATION_MOTOR
+
+    // D20: LDO enable
+    14, // D20 P0.14  RT9080_EN
+
+    // D21-D26: Flash QSPI (ZD25WQ32C)
+    12, // D21 P0.12  FLASH_CS
+    4,  // D22 P0.04  FLASH_SCLK
+    6,  // D23 P0.06  FLASH_IO0
+    41, // D24 P1.09  FLASH_IO1
+    8,  // D25 P0.08  FLASH_IO2
+    26, // D26 P0.26  FLASH_IO3
+
+    // D27-D28: Interrupt lines
+    7,  // D27 P0.07  ICM20948_INT
+    16, // D28 P0.16  SGM41562_INT
+
+    // D29: Boot button
+    24, // D29 P0.24  BOOT
+};
+}
+
+void initVariant()
+{
+    // Flash CS high (deselect)
+    pinMode(PIN_QSPI_CS, OUTPUT);
+    digitalWrite(PIN_QSPI_CS, HIGH);
+
+    // Enable battery voltage measurement
+    pinMode(BAT_READ, OUTPUT);
+    digitalWrite(BAT_READ, HIGH);
+
+    // Enable RT9080 LDO
+    pinMode(D20, OUTPUT);
+    digitalWrite(D20, HIGH);
+}

variants/nrf52840/t-impulse-plus/variant.h

@@ -0,0 +1,181 @@
+#ifndef _T_IMPULSE_PLUS_H_
+#define _T_IMPULSE_PLUS_H_
+#include "WVariant.h"
+
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+//  Clock Configuration
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+#define VARIANT_MCK (64000000ul)
+#define USE_LFXO
+
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+//  Pin Capacity Definitions
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+#define PINS_COUNT (30u)
+#define NUM_DIGITAL_PINS (30u)
+#define NUM_ANALOG_INPUTS (1u)
+#define NUM_ANALOG_OUTPUTS (0u)
+
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+//  Digital Pin Mapping
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+#define D0 0   // P0.02  SX1262_RST
+#define D1 1   // P0.29  SX1262_DIO1
+#define D2 2   // P0.31  SX1262_BUSY
+#define D3 3   // P1.14  SX1262_CS
+#define D4 4   // P0.03  SPI_SCK
+#define D5 5   // P0.30  SPI_MISO
+#define D6 6   // P0.28  SPI_MOSI
+#define D7 7   // P1.13  RF_VC1 (TXEN)
+#define D8 8   // P1.07  RF_VC2 (RXEN)
+#define D9 9   // P1.12  GPS module TX → MCU RX
+#define D10 10 // P1.11  GPS module RX ← MCU TX
+#define D11 11 // P1.10  GPS_EN (active LOW)
+#define D12 12 // P0.20  SCREEN_SDA
+#define D13 13 // P0.15  SCREEN_SCL
+#define D14 14 // P1.08  IMU_SDA
+#define D15 15 // P0.11  IMU_SCL
+#define D16 16 // P0.05  BATTERY_ADC
+#define D17 17 // P0.25  BATTERY_CTL
+#define D18 18 // P1.04  TTP223_KEY
+#define D19 19 // P0.22  VIBRATION_MOTOR
+#define D20 20 // P0.14  RT9080_EN
+#define D21 21 // P0.12  FLASH_CS
+#define D22 22 // P0.04  FLASH_SCLK
+#define D23 23 // P0.06  FLASH_IO0
+#define D24 24 // P1.09  FLASH_IO1
+#define D25 25 // P0.08  FLASH_IO2
+#define D26 26 // P0.26  FLASH_IO3
+#define D27 27 // P0.07  ICM20948_INT
+#define D28 28 // P0.16  SGM41562_INT
+#define D29 29 // P0.24  BOOT
+
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+//  LED Configuration (no physical LED)
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+#define LED_STATE_ON 1
+
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+//  Button Configuration (TTP223 capacitive touch)
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+#define PIN_BUTTON_TOUCH D18
+#define BUTTON_TOUCH_ACTIVE_LOW true
+#define BUTTON_TOUCH_ACTIVE_PULLUP false
+
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+//  Analog Pin Definitions
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+#define PIN_VBAT D16 // P0.05 Battery voltage sense
+
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+//  I2C Configuration
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+// Primary I2C: Display (SSD1315)
+#define PIN_WIRE_SDA D12 // P0.20
+#define PIN_WIRE_SCL D13 // P0.15
+
+// Secondary I2C: IMU (ICM20948) + PMU (SGM41562)
+#define WIRE_INTERFACES_COUNT 2
+#define PIN_WIRE1_SDA D14 // P1.08
+#define PIN_WIRE1_SCL D15 // P0.11
+#define I2C_NO_RESCAN
+
+static const uint8_t SDA = PIN_WIRE_SDA;
+static const uint8_t SCL = PIN_WIRE_SCL;
+
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+//  Display (SSD1315, compatible with SSD1306 driver)
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+#define HAS_SCREEN 1
+#define USE_SSD1306 1
+#define OLED_TINY
+#define OLED_GEOMETRY_OVERRIDE GEOMETRY_64_32
+
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+//  SPI Configuration (SX1262 LoRa)
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+#define SPI_INTERFACES_COUNT 1
+#define PIN_SPI_SCK D4  // P0.03
+#define PIN_SPI_MISO D5 // P0.30
+#define PIN_SPI_MOSI D6 // P0.28
+
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+//  SX1262 LoRa (S62F module)
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+#define USE_SX1262
+#define SX126X_CS D3
+#define SX126X_DIO1 D1
+#define SX126X_BUSY D2
+#define SX126X_RESET D0
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#define SX126X_TXEN D7 // RF_VC1
+#define SX126X_RXEN D8 // RF_VC2
+
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+//  Power Management
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+#define BAT_READ D17 // P0.25 Battery measurement control (HIGH = enable)
+#define BATTERY_PIN PIN_VBAT
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define ADC_MULTIPLIER 2.0
+#define AREF_VOLTAGE 3.6
+
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+//  GPS (u-blox MIA-M10Q)
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+#define GPS_UBLOX
+#define HAS_GPS 1
+#define GPS_RX_PIN D9  // P1.12 — MCU RX, wired to GPS module TX
+#define GPS_TX_PIN D10 // P1.11 — MCU TX, wired to GPS module RX
+#define PIN_GPS_EN D11 // P1.10
+#define GPS_EN_ACTIVE LOW
+#define GPS_BAUDRATE 38400
+#define GPS_THREAD_INTERVAL 50
+#define PIN_SERIAL1_TX GPS_TX_PIN
+#define PIN_SERIAL1_RX GPS_RX_PIN
+
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+//  On-board QSPI Flash (ZD25WQ32CEIGR)
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+#define PIN_QSPI_SCK D22 // P0.04
+#define PIN_QSPI_CS D21  // P0.12
+#define PIN_QSPI_IO0 D23 // P0.06
+#define PIN_QSPI_IO1 D24 // P1.09
+#define PIN_QSPI_IO2 D25 // P0.08
+#define PIN_QSPI_IO3 D26 // P0.26
+
+#define EXTERNAL_FLASH_DEVICES W25Q32JV_IQ
+#define EXTERNAL_FLASH_USE_QSPI
+
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+//  Vibration Motor (GPIO active-high)
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+#define LED_NOTIFICATION D19 // P0.22
+#define HAPTIC_FEEDBACK_PIN LED_NOTIFICATION
+
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+//  IMU (ICM20948 on Wire1)
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+#define HAS_ICM20948
+
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+//  Charger (SGM41562 on Wire1 @ 0x03)
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+#define HAS_SGM41562
+#define SGM41562_WIRE Wire1
+
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+//  Compatibility Definitions
+// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define PIN_SERIAL2_RX (-1)
+#define PIN_SERIAL2_TX (-1)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // _T_IMPULSE_PLUS_H_