Merge branch 'develop' into thinknode-m9

variants/esp32s3/ELECROW-ThinkNode-M9/pins_arduino.h

@@ -0,0 +1,20 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+static const uint8_t SDA = 7;
+static const uint8_t SCL = 6;
+
+static const uint8_t SS = 39;
+static const uint8_t MOSI = 47;
+static const uint8_t MISO = 38;
+static const uint8_t SCK = 40;
+
+#endif

variants/esp32s3/ELECROW-ThinkNode-M9/platformio.ini

@@ -0,0 +1,83 @@
+[thinknode_m9_base]
+extends = esp32s3_base
+board = crowpanel
+board_check = true
+board_build.partitions = default_16MB.csv
+upload_protocol = esptool
+build_src_filter =
+  ${esp32s3_base.build_src_filter}
+  +<../variants/esp32s3/ELECROW-ThinkNode-M9>
+build_flags =
+  ${esp32s3_base.build_flags}
+  -I variants/esp32s3/ELECROW-ThinkNode-M9
+  -D ELECROW_ThinkNode_M9
+  -D BOARD_HAS_PSRAM
+  -D HAS_SDCARD=1
+  -D SDCARD_USE_SPI1
+  -D SDCARD_USER_SPI_BEGIN
+  -D HAS_SCREEN=1
+;  -L variants/esp32s3/ELECROW-ThinkNode-M9/lib
+;  -lqst
+lib_deps = ${esp32s3_base.lib_deps}
+  lovyan03/LovyanGFX@1.2.19
+  lewisxhe/SensorLib@0.3.4
+
+[env:thinknode_m9]
+extends = thinknode_m9_base
+build_flags = 
+  ${thinknode_m9_base.build_flags}
+  
+[env:thinknode_m9-tft]
+extends = thinknode_m9_base
+build_flags = 
+  ${thinknode_m9_base.build_flags}
+  -D RADIOLIB_SPI_PARANOID=0
+  -D CONFIG_DISABLE_HAL_LOCKS=1
+  -D HAS_TFT=1
+  -D USE_PACKET_API
+  -D USE_PIN_BUZZER=PIN_BUZZER
+  -D LV_LVGL_H_INCLUDE_SIMPLE
+  -D LV_CONF_INCLUDE_SIMPLE
+  -D LV_COMP_CONF_INCLUDE_SIMPLE
+  -D LV_USE_SYSMON=0
+  -D LV_USE_PROFILER=0
+  -D LV_USE_PERF_MONITOR=0
+  -D LV_USE_MEM_MONITOR=0
+  -D LV_USE_LOG=0
+  -D LV_BUILD_TEST=0
+  -D USE_LOG_DEBUG
+  -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
+  -D RAM_SIZE=5120
+  -D LGFX_DRIVER_TEMPLATE
+  -D LGFX_DRIVER=LGFX_GENERIC
+  -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_GENERIC.h\"
+  -D VIEW_320x240
+  -D LGFX_PANEL=ST7789
+  -D DISPLAY_SIZE=320x240
+  -D LGFX_ROTATION=3
+  -D LGFX_CFG_HOST=SPI3_HOST
+  -D LGFX_PIN_SCK=40
+  -D LGFX_PIN_MOSI=47
+  -D LGFX_PIN_DC=15
+  -D LGFX_PIN_CS=16
+  -D LGFX_PIN_BL=17
+  -D LGFX_PIN_RST=14
+  -D LGFX_SCREEN_WIDTH=240
+  -D LGFX_SCREEN_HEIGHT=320
+  -D LGFX_INVERT_LIGHT=true
+  -D SPI_FREQUENCY=80000000
+  -D MAP_FULL_REDRAW
+
+lib_deps = 
+  ${thinknode_m9_base.lib_deps}
+  ${device-ui_base.lib_deps}
+  https://github.com/mverch67/ESPWebDAV/archive/a57dedfac243b1c47db90c712db664f896752467.zip
+
+
+
+
+
+
+
+
+  

variants/esp32s3/ELECROW-ThinkNode-M9/rfswitch.h

@@ -0,0 +1,11 @@
+#include "RadioLib.h"
+
+static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
+
+static const Module::RfSwitchMode_t rfswitch_table[] = {
+    // mode                  DIO5  DIO6
+    {LR11x0::MODE_STBY, {LOW, LOW}},  {LR11x0::MODE_RX, {HIGH, LOW}},
+    {LR11x0::MODE_TX, {HIGH, HIGH}},  {LR11x0::MODE_TX_HP, {LOW, HIGH}},
+    {LR11x0::MODE_TX_HF, {LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW}},
+    {LR11x0::MODE_WIFI, {LOW, LOW}},  END_OF_MODE_TABLE,
+};

variants/esp32s3/ELECROW-ThinkNode-M9/variant.cpp

@@ -0,0 +1,11 @@
+#include "configuration.h"
+
+void earlyInitVariant()
+{
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(TFT_CS, OUTPUT);
+    digitalWrite(TFT_CS, HIGH);
+}

variants/esp32s3/ELECROW-ThinkNode-M9/variant.h

@@ -0,0 +1,105 @@
+#define CANNED_MESSAGE_MODULE_ENABLE 1
+#define PRESET_MESSAGE_MODULE_ENABLE 1
+
+/*Power*/
+#define VEXT_ENABLE 18
+#define VEXT_ON_VALUE LOW
+#define PIN_GPS_EN 11
+#define GPS_EN_ACTIVE LOW
+
+/*Wire Interface*/
+#define WIRE_INTERFACES_COUNT 2
+// I2C keybuttons
+#define I2C_SCL1 21
+#define I2C_SDA1 20
+#define KB_INT 12
+// I2C peripheral`
+#define I2C_SCL 6
+#define I2C_SDA 7
+
+/*LED*/
+#define PIN_LED 13
+#define KB_LED 46
+
+/*BUZZER*/
+#define PIN_BUZZER 9
+
+/*CHARGE_CHECK*/
+#define DONE 8
+#define EXT_PWR_DETECT 1
+#define EXT_CHRG_DETECT 1
+#define EXT_CHRG_DETECT_VALUE LOW
+
+/*GPS*/
+#define HAS_GPS 1
+#define GPS_L76K
+#define GPS_BAUDRATE 9600
+#define PIN_GPS_RESET 5
+#define PIN_GPS_PPS 4
+#define PIN_GPS_STANDBY 10 // An output to wake GPS, low means allow sleep, high means force wake
+#define GPS_TX_PIN 3
+#define GPS_RX_PIN 2
+#define GPS_THREAD_INTERVAL 50
+
+/*SPI*/
+#define SPI_MOSI 47
+#define SPI_SCK 40
+#define SPI_MISO 38
+
+/*SD Card*/
+#define SDCARD_CS 48
+#define SD_SPI_FREQUENCY 80000000U
+
+/*Screen*/
+// #define USE_ST7789 1
+#define ST7789_CS 16
+#define ST7789_RS 15
+#define ST7789_TE 19
+#define ST7789_SDA SPI_MOSI // MOSI
+#define ST7789_SCK SPI_SCK
+#define ST7789_RESET 14
+#define ST7789_MISO SPI_MISO
+#define ST7789_BUSY -1
+#define ST7789_BL 17
+#define ST7789_SPI_HOST SPI3_HOST
+#define SPI_FREQUENCY 80000000
+#define SPI_READ_FREQUENCY 16000000
+
+#define USE_TFTDISPLAY 1
+#define TFT_CS ST7789_CS
+#define TFT_BL ST7789_BL
+#define TFT_HEIGHT 320
+#define TFT_WIDTH 240
+#define TFT_OFFSET_X 0
+#define TFT_OFFSET_Y 0
+#define TFT_OFFSET_ROTATION 0
+#define TFT_PWM_FREQ 44000
+#define TFT_PWM_CHANNEL 7
+#define TFT_INVERT_LIGHT true
+#define TFT_BACKLIGHT_ON LOW
+#define SCREEN_ROTATE
+#define SCREEN_TRANSITION_FRAMERATE 5
+#define BRIGHTNESS_DEFAULT 128
+
+/*Lora radio*/
+#define HW_SPI1_DEVICE
+#define LORA_SCK SPI_SCK
+#define LORA_MISO SPI_MISO
+#define LORA_MOSI SPI_MOSI
+#define LORA_CS 39
+#define LORA_RESET 45
+#define LORA_DIO0 41
+
+#define USE_LR1110
+#define LR1110_IRQ_PIN 42
+#define LR1110_NRESET_PIN LORA_RESET
+#define LR1110_BUSY_PIN LORA_DIO0
+#define LR1110_SPI_NSS_PIN LORA_CS
+#define LR1110_SPI_SCK_PIN LORA_SCK
+#define LR1110_SPI_MOSI_PIN LORA_MOSI
+#define LR1110_SPI_MISO_PIN LORA_MISO
+#define LR11X0_DIO3_TCXO_VOLTAGE 3.3
+#define LR11X0_DIO_AS_RF_SWITCH
+
+/*RTC*/
+#define PCF8563_RTC 0x51