Some fixes for xeddsa pr (#9610)

* fix: add null check for getMeshNode() in NodeInfoModule

getMeshNode() can return nullptr for unknown nodes. Dereferencing
without a check crashes the firmware when receiving NodeInfo from
a node not yet in the database.

* fix: enforce XEdDSA signature verification and prevent stripping

Previously, failed signature verification still allowed the packet
through, making signatures purely cosmetic. Now:

- Failed verification drops the packet (DECODE_FAILURE)
- Successfully verified nodes get HAS_XEDDSA_SIGNED bitfield set
- Unsigned packets from previously-signing nodes are rejected
- Log levels reduced from WARN/ERROR to DEBUG/WARN as appropriate

* fix: include packet metadata in XEdDSA signature

The signature now covers [fromNode | packetId | portnum | payload]
instead of just the payload bytes. This prevents:
- Replay attacks (different packetId fails verification)
- Reattribution (different fromNode fails verification)
- Portnum redirection (different portnum fails verification)

Also adds a key initialization check to xeddsa_sign (returns false
if XEdDSA keys are all zeros) and checks the return value in the
encode path.

* fix: handle existing key pair in AdminModule security config

When a user provides both a valid private key and public key via
admin config, the crypto engine's DH private key and owner public
key were never loaded. DMs and XEdDSA signing would silently break.

Add an else branch to load both keys into the crypto engine.

* perf: cache Ed25519 public key conversion in xeddsa_verify

curve_to_ed_pub() performs field element parsing, inversion, and
multiplication on every call. Since packets from the same node
tend to arrive in bursts, a single-entry cache avoids repeating
this expensive conversion for consecutive packets from one sender.

* fix: skip identity cleanup when node number is unchanged

createNewIdentity() was called on every generateCryptoKeyPair(),
including normal boots where the same key is regenerated. This
caused unnecessary NodeDB writes and old-node cleanup logic to
run when the node number hadn't actually changed.

Also fixes only zeroing byte[0] of the old node's public key
instead of clearing the entire array.

* fix: replace hardcoded 120 with derived XEDDSA_SIGNATURE_SIZE constant

The payload size check for XEdDSA signing used a magic number (120).
Replace with a derivation from DATA_PAYLOAD_LEN and XEDDSA_SIGNATURE_SIZE
so the limit adjusts automatically if constants change. This also
increases the max signable payload from 120 to 169 bytes, which is
still safe since the actual encoded size is checked after pb_encode.

* fix: add const qualifiers to XEdDSA verify and curve_to_ed_pub inputs

pubKey, payload, and signature parameters in xeddsa_verify are
input-only and should not be modified. Same for curve_pubkey in
curve_to_ed_pub.

* chore: remove commented-out old Crypto dependency in portduino.ini

* Leave out the admin module change for now

---------

Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>

.github/actions/setup-base/action.yml

@@ -5,7 +5,7 @@ runs:
   using: composite
   steps:
     - name: Checkout code
-      uses: actions/checkout@v5
+      uses: actions/checkout@v6
       with:
         submodules: recursive
         ref: ${{github.event.pull_request.head.ref}}

.github/workflows/build_debian_src.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           path: meshtasticd

.github/workflows/build_firmware.yml

@@ -22,7 +22,7 @@ jobs:
     outputs:
       artifact-id: ${{ steps.upload.outputs.artifact-id }}
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/build_one_arch.yml

@@ -1,176 +0,0 @@
-name: Build One Arch
-
-on:
-  workflow_dispatch:
-    inputs:
-      # trunk-ignore(checkov/CKV_GHA_7)
-      arch:
-        type: choice
-        options:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-          - native
-
-permissions: read-all
-
-env:
-  INPUT_ARCH: ${{ github.event.inputs.arch }}
-
-jobs:
-  setup:
-    runs-on: ubuntu-24.04
-    steps:
-      - uses: actions/checkout@v5
-      - uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-          cache: pip
-      - run: pip install -U platformio
-      - name: Generate matrix
-        id: jsonStep
-        run: |
-          TARGETS=$(./bin/generate_ci_matrix.py $INPUT_ARCH --level extra)
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
-          echo "selected_arch=$TARGETS" >> $GITHUB_OUTPUT
-    outputs:
-      selected_arch: ${{ steps.jsonStep.outputs.selected_arch }}
-
-  version:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-    outputs:
-      long: ${{ steps.version.outputs.long }}
-      deb: ${{ steps.version.outputs.deb }}
-
-  build:
-    if: ${{ github.event_name != 'workflow_dispatch' }}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix:
-        build: ${{ fromJson(needs.setup.outputs.selected_arch) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.build.board }}
-      platform: ${{ matrix.build.arch }}
-
-  build-debian-src:
-    if: ${{ github.repository == 'meshtastic/firmware' && github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  package-pio-deps-native-tft:
-    if: ${{ inputs.arch == 'native' }}
-    uses: ./.github/workflows/package_pio_deps.yml
-    with:
-      pio_env: native-tft
-    secrets: inherit
-
-  test-native:
-    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' }}
-    uses: ./.github/workflows/test_native.yml
-
-  gather-artifacts:
-    permissions:
-      contents: write
-      pull-requests: write
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    needs: [version, build]
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v5
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - uses: actions/download-artifact@v6
-        with:
-          path: ./
-          pattern: firmware-${{inputs.arch}}-*
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -R
-
-      - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
-
-      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v5
-        with:
-          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: |
-            ./firmware-*.bin
-            ./firmware-*.uf2
-            ./firmware-*.hex
-            ./firmware-*-ota.zip
-            ./device-*.sh
-            ./device-*.bat
-            ./littlefs-*.bin
-            ./bleota*bin
-            ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
-
-      - uses: actions/download-artifact@v6
-        with:
-          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      # For diagnostics
-      - name: Show artifacts
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v5
-        with:
-          name: debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
-          overwrite: true
-          path: ./*.elf
-          retention-days: 30
-
-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
-        with:
-          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/build_one_target.yml

@@ -15,7 +15,6 @@ on:
           - rp2040
           - rp2350
           - stm32
-          - native
       target:
         type: string
         required: false
@@ -42,10 +41,9 @@ jobs:
           - rp2040
           - rp2350
           - stm32
-
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -60,13 +58,13 @@ jobs:
           echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
           echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
           echo "Targets:" >> $GITHUB_STEP_SUMMARY
-          echo $TARGETS >> $GITHUB_STEP_SUMMARY
+          echo $TARGETS | jq -r 'sort_by(.board) |.[] | "- " + .board' >> $GITHUB_STEP_SUMMARY
 
   version:
     if: ${{ inputs.target != '' }}
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -87,25 +85,6 @@ jobs:
       pio_env: ${{ inputs.target }}
       platform: ${{ inputs.arch }}
 
-  build-debian-src:
-    if: ${{ github.repository == 'meshtastic/firmware' && inputs.arch == 'native' }}
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  package-pio-deps-native-tft:
-    if: ${{ inputs.arch == 'native' }}
-    uses: ./.github/workflows/package_pio_deps.yml
-    with:
-      pio_env: native-tft
-    secrets: inherit
-
-  test-native:
-    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' && inputs.target != '' }}
-    uses: ./.github/workflows/test_native.yml
-
   gather-artifacts:
     permissions:
       contents: write
@@ -114,7 +93,7 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}

.github/workflows/docker_build.yml

@@ -47,7 +47,7 @@ jobs:
     runs-on: ${{ inputs.runs-on }}
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/docker_manifest.yml

@@ -83,7 +83,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/hook_copr.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           ref: ${{ github.ref }}

.github/workflows/main_matrix.yml

@@ -35,7 +35,7 @@ jobs:
           - check
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -59,7 +59,7 @@ jobs:
   version:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -81,7 +81,7 @@ jobs:
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -163,7 +163,7 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -242,7 +242,7 @@ jobs:
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -311,7 +311,7 @@ jobs:
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -366,7 +366,7 @@ jobs:
         esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6

.github/workflows/merge_queue.yml

@@ -17,7 +17,7 @@ jobs:
           - check
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -40,7 +40,7 @@ jobs:
   version:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -62,7 +62,7 @@ jobs:
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -142,7 +142,7 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -221,7 +221,7 @@ jobs:
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -290,7 +290,7 @@ jobs:
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -345,7 +345,7 @@ jobs:
         esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6

.github/workflows/nightly.yml

@@ -14,7 +14,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1
@@ -31,7 +31,7 @@ jobs:
       pull-requests: write # For trunk to create PRs
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Trunk Upgrade
         uses: trunk-io/trunk-action/upgrade@v1

.github/workflows/package_obs.yml

@@ -34,7 +34,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           path: meshtasticd

.github/workflows/package_pio_deps.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/package_ppa.yml

@@ -32,7 +32,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           path: meshtasticd

.github/workflows/pr_tests.yml

@@ -40,7 +40,7 @@ jobs:
       checks: write
       pull-requests: write
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
         with:
           submodules: recursive
 

.github/workflows/release_channels.yml

@@ -60,7 +60,10 @@ jobs:
         shell: bash
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
+        with:
+          # Always use master branch for version bumps
+          ref: master
 
       - name: Setup Python
         uses: actions/setup-python@v6

.github/workflows/sec_sast_semgrep_cron.yml

@@ -21,7 +21,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       # step 2
       - name: full scan

.github/workflows/sec_sast_semgrep_pull.yml

@@ -13,7 +13,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           fetch-depth: 0
 

.github/workflows/test_native.yml

@@ -14,7 +14,7 @@ jobs:
     name: Native Simulator Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -70,7 +70,7 @@ jobs:
     name: Native PlatformIO Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -127,7 +127,7 @@ jobs:
       - platformio-tests
     if: always()
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -143,7 +143,7 @@ jobs:
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.1.1
+        uses: dorny/test-reporter@v2.2.0
         with:
           name: PlatformIO Tests
           path: testreport.xml

.github/workflows/tests.yml

@@ -20,7 +20,7 @@ jobs:
     runs-on: test-runner
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       # - uses: actions/setup-python@v5
       #   with:

.github/workflows/trunk_annotate_pr.yml

@@ -18,7 +18,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_check.yml

@@ -16,7 +16,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_format_pr.yml

@@ -15,7 +15,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}

.github/workflows/update_protobufs.yml

@@ -11,7 +11,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: true
 

.trunk/trunk.yaml

@@ -4,31 +4,31 @@ cli:
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.3
+      ref: v1.7.4
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.489
-    - renovate@41.169.1
+    - checkov@3.2.495
+    - renovate@42.24.1
     - prettier@3.6.2
-    - trufflehog@3.90.12
+    - trufflehog@3.91.1
     - yamllint@1.37.1
-    - bandit@1.8.6
+    - bandit@1.9.2
     - trivy@0.67.2
     - taplo@0.10.0
-    - ruff@0.14.3
+    - ruff@0.14.6
     - isort@7.0.0
-    - markdownlint@0.45.0
+    - markdownlint@0.46.0
     - oxipng@9.1.5
     - svgo@4.0.0
-    - actionlint@1.7.8
+    - actionlint@1.7.9
     - flake8@7.3.0
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@25.9.0
+    - black@25.11.0
     - git-diff-check
-    - gitleaks@8.28.0
+    - gitleaks@8.30.0
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

README.md

@@ -37,4 +37,3 @@ Join our community and help improve Meshtastic! 🚀
 ## Stats
 
 ![Alt](https://repobeats.axiom.co/api/embed/8025e56c482ec63541593cc5bd322c19d5c0bdcf.svg "Repobeats analytics image")
-

arch/esp32/esp32.ini

@@ -61,7 +61,7 @@ lib_deps =
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
+  https://github.com/meshtastic/Crypto/archive/1aa30eb536bd52a576fde6dfa393bf7349cf102d.zip
 
 lib_ignore = 
   segger_rtt

arch/esp32/esp32c6.ini

@@ -32,7 +32,7 @@ lib_deps =
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
+  https://github.com/meshtastic/Crypto/archive/1aa30eb536bd52a576fde6dfa393bf7349cf102d.zip
 
 build_src_filter = 
  ${esp32_base.build_src_filter} -<mesh/http> 

arch/nrf52/nrf52.ini

@@ -7,7 +7,7 @@ extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
   # TODO renovate
-  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#e13f5820002a4fb2a5e6754b42ace185277e5adf
+  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#c770c8a16a351b55b86e347a3d9d7b74ad0bbf39
   ; Don't renovate toolchain-gccarmnoneeabi
   platformio/toolchain-gccarmnoneeabi@~1.90301.0
 
@@ -29,7 +29,7 @@ lib_deps=
   ${arduino_base.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
+  https://github.com/meshtastic/Crypto/archive/1aa30eb536bd52a576fde6dfa393bf7349cf102d.zip
 
 lib_ignore =
   BluetoothOTA

arch/nrf52/nrf52840.ini

@@ -8,7 +8,7 @@ lib_deps =
   ${environmental_base.lib_deps}
   ${environmental_extra.lib_deps}
   # renovate: datasource=git-refs depName=Kongduino-Adafruit_nRFCrypto packageName=https://github.com/Kongduino/Adafruit_nRFCrypto gitBranch=master
-  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/5f838d2709461a2c981f642917aa50254a25c14c.zip
+  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/8cde7189b5ead9dcd49f72601b43b969c0bbc06e.zip
 
 ; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
 

arch/portduino/portduino.ini

@@ -24,7 +24,7 @@ lib_deps =
   ${radiolib_base.lib_deps}
   ${environmental_base.lib_deps}
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
+  https://github.com/meshtastic/Crypto/archive/1aa30eb536bd52a576fde6dfa393bf7349cf102d.zip
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
   lovyan03/LovyanGFX@^1.2.0
   # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main

arch/rp2xx0/rp2040.ini

@@ -31,4 +31,4 @@ lib_deps =
   ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
+  https://github.com/meshtastic/Crypto/archive/1aa30eb536bd52a576fde6dfa393bf7349cf102d.zip

arch/rp2xx0/rp2350.ini

@@ -28,4 +28,4 @@ lib_deps =
   ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
+  https://github.com/meshtastic/Crypto/archive/1aa30eb536bd52a576fde6dfa393bf7349cf102d.zip

arch/stm32/stm32.ini

@@ -2,7 +2,7 @@
 extends = arduino_base
 platform =
   # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
-  platformio/ststm32@19.3.0
+  platformio/ststm32@19.4.0
 platform_packages =
   # TODO renovate
   platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
@@ -53,7 +53,7 @@ lib_deps =
   ${radiolib_base.lib_deps}
 
   # renovate: datasource=git-refs depName=caveman99-stm32-Crypto packageName=https://github.com/caveman99/Crypto gitBranch=main
-  https://github.com/caveman99/Crypto/archive/1aa30eb536bd52a576fde6dfa393bf7349cf102d.zip
+  https://github.com/meshtastic/Crypto/archive/1aa30eb536bd52a576fde6dfa393bf7349cf102d.zip
 
 lib_ignore =
   OneButton

boards/ThinkNode-M3.json

@@ -0,0 +1,53 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
+    "usb_product": "elecrow_eink",
+    "mcu": "nrf52840",
+    "variant": "ELECROW-ThinkNode-M3",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "elecrow nrf",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "",
+  "vendor": "ELECROW"
+}

boards/ThinkNode-M6.json

@@ -0,0 +1,53 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_ELECROW_M6 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
+    "usb_product": "elecrow_thinknode_m6",
+    "mcu": "nrf52840",
+    "variant": "ELECROW-ThinkNode-M6",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "ELECROW ThinkNode M6",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.elecrow.com/thinknode-m6-outdoor-solar-power-for-lora-powered-by-nrf52840-supports-gps.html",
+  "vendor": "ELECROW"
+}

boards/hackaday-communicator.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "hackaday-communicator"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "hackaday-communicator (16 MB FLASH, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 1500000
+  },
+  "url": "hackaday.com",
+  "vendor": "hackaday"
+}

boards/muzi-base.json

@@ -0,0 +1,56 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_MUZI_BASE -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0xcafe"]],
+    "mcu": "nrf52840",
+    "variant": "muzi-base",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Muzi Base",
+  "url": "https://muzi.works/",
+  "vendor": "MuziWorks",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "blackmagic",
+      "cmsis-dap",
+      "mbed",
+      "stlink"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  }
+}

debian/changelog

@@ -4,6 +4,7 @@ meshtasticd (2.7.16.0) unstable; urgency=medium
 
  -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Wed, 19 Nov 2025 16:12:32 +0000
 
+
 meshtasticd (2.7.15.0) unstable; urgency=medium
 
   * Version 2.7.15

meshtasticd.spec.rpkg

@@ -50,6 +50,13 @@ BuildRequires: pkgconfig(x11)
 BuildRequires: pkgconfig(libinput)
 BuildRequires: pkgconfig(xkbcommon-x11)
 
+# libbsd is needed on older Fedora/RHEL to provide 'strlcpy'
+%if 0%{?fedora} >= 39 || 0%{?rhel} >= 10
+BuildRequires: glibc-devel >= 2.38
+%else
+BuildRequires: pkgconfig(libbsd-overlay)
+%endif
+
 Requires:      systemd-udev
 
 %description

platformio.ini

@@ -62,7 +62,7 @@ monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0cbc26b1f8f61957af0475f486b362eafe7cc4e2.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/2887bf4a19f64d92c984dcc8fd5ca7429e425e4a.zip
 	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
 	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
@@ -90,7 +90,7 @@ framework = arduino
 lib_deps =
 	${env.lib_deps}
 	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=end2endzone/library/NonBlockingRTTTL
-	end2endzone/NonBlockingRTTTL@1.3.0
+	end2endzone/NonBlockingRTTTL@1.4.0
 build_flags = ${env.build_flags} -Os
 build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/niche/>
 
@@ -121,7 +121,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/19b7855e9a1d9deff37391659ca7194e4ef57c43.zip
+	https://github.com/meshtastic/device-ui/archive/28167c67dfd13015a0b5eef1828f95fe8e3ab7c3.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -169,7 +169,7 @@ lib_deps =
 	# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
 	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
 	# renovate: datasource=custom.pio depName=INA226 packageName=robtillaart/library/INA226
-	robtillaart/INA226@0.6.4
+	robtillaart/INA226@0.6.5
 	# renovate: datasource=custom.pio depName=SparkFun MAX3010x packageName=sparkfun/library/SparkFun MAX3010x Pulse and Proximity Sensor Library
 	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2
 	# renovate: datasource=custom.pio depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/library/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library
@@ -213,6 +213,6 @@ lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
 	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
 	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
-	sensirion/Sensirion Core@0.7.1
+	sensirion/Sensirion Core@0.7.2
 	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
 	sensirion/Sensirion I2C SCD4x@1.1.0

src/DisplayFormatters.cpp

@@ -34,9 +34,6 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
     case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
         return useShortName ? "LongM" : "LongMod";
         break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_LITE_FAST:
-        return useShortName ? "LiteF" : "LiteFast";
-        break;
     default:
         return useShortName ? "Custom" : "Invalid";
         break;

src/Power.cpp

@@ -278,6 +278,11 @@ class AnalogBatteryLevel : public HasBatteryLevel
                 break;
             }
         }
+#if defined(BATTERY_CHARGING_INV)
+        // bit of trickery to show 99% up until the charge finishes
+        if (!digitalRead(BATTERY_CHARGING_INV) && battery_SOC > 99)
+            battery_SOC = 99;
+#endif
         return clamp((int)(battery_SOC), 0, 100);
     }
 
@@ -455,6 +460,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
         // if it's not HIGH - check the battery
 #endif
+#elif defined(MUZI_BASE)
+        return NRF_POWER->USBREGSTATUS & POWER_USBREGSTATUS_VBUSDETECT_Msk;
 #endif
         return getBattVoltage() > chargingVolt;
     }
@@ -470,6 +477,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #endif
 #ifdef EXT_CHRG_DETECT
         return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
+#elif defined(BATTERY_CHARGING_INV)
+        return !digitalRead(BATTERY_CHARGING_INV);
 #else
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(DISABLE_INA_CHARGING_DETECTION)
         if (hasINA()) {
@@ -698,11 +707,18 @@ bool Power::setup()
         []() {
             power->setIntervalFromNow(0);
             runASAP = true;
-            BaseType_t higherWake = 0;
         },
         CHANGE);
 #endif
-
+#ifdef BATTERY_CHARGING_INV
+    attachInterrupt(
+        BATTERY_CHARGING_INV,
+        []() {
+            power->setIntervalFromNow(0);
+            runASAP = true;
+        },
+        CHANGE);
+#endif
     enabled = found;
     low_voltage_counter = 0;
 
@@ -759,6 +775,8 @@ void Power::shutdown()
     if (screen) {
 #ifdef T_DECK_PRO
         screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
+#elif defined(USE_EINK)
+        screen->showSimpleBanner("Shutting Down...", 2250); // dismiss after 3 seconds to avoid the banner on the sleep screen
 #else
         screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
 #endif
@@ -1435,7 +1453,7 @@ class LipoCharger : public HasBatteryLevel
     /**
      * return true if there is an external power source detected
      */
-    virtual bool isVbusIn() override { return PPM->getVbusVoltage() > 0; }
+    virtual bool isVbusIn() override { return PPM->isVbusIn(); }
 
     /**
      * return true if the battery is currently charging

src/PowerFSM.cpp

@@ -57,21 +57,21 @@ static bool isPowered()
 
 static void sdsEnter()
 {
-    LOG_DEBUG("State: SDS");
+    LOG_POWERFSM("State: SDS");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
     doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false, false);
 }
 
 static void lowBattSDSEnter()
 {
-    LOG_DEBUG("State: Lower batt SDS");
+    LOG_POWERFSM("State: Lower batt SDS");
     doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false, true);
 }
 extern Power *power;
 
 static void shutdownEnter()
 {
-    LOG_DEBUG("State: SHUTDOWN");
+    LOG_POWERFSM("State: SHUTDOWN");
     shutdownAtMsec = millis();
 }
 
@@ -81,7 +81,7 @@ static uint32_t secsSlept;
 
 static void lsEnter()
 {
-    LOG_INFO("lsEnter begin, ls_secs=%u", config.power.ls_secs);
+    LOG_POWERFSM("lsEnter begin, ls_secs=%u", config.power.ls_secs);
     if (screen)
         screen->setOn(false);
     secsSlept = 0; // How long have we been sleeping this time
@@ -155,12 +155,12 @@ static void lsIdle()
 
 static void lsExit()
 {
-    LOG_INFO("Exit state: LS");
+    LOG_POWERFSM("State: lsExit");
 }
 
 static void nbEnter()
 {
-    LOG_DEBUG("State: NB");
+    LOG_POWERFSM("State: nbEnter");
     if (screen)
         screen->setOn(false);
 #ifdef ARCH_ESP32
@@ -173,6 +173,7 @@ static void nbEnter()
 
 static void darkEnter()
 {
+    LOG_POWERFSM("State: darkEnter");
     setBluetoothEnable(true);
     if (screen)
         screen->setOn(false);
@@ -180,7 +181,7 @@ static void darkEnter()
 
 static void serialEnter()
 {
-    LOG_DEBUG("State: SERIAL");
+    LOG_POWERFSM("State: serialEnter");
     setBluetoothEnable(false);
     if (screen) {
         screen->setOn(true);
@@ -189,13 +190,14 @@ static void serialEnter()
 
 static void serialExit()
 {
+    LOG_POWERFSM("State: serialExit");
     // Turn bluetooth back on when we leave serial stream API
     setBluetoothEnable(true);
 }
 
 static void powerEnter()
 {
-    // LOG_DEBUG("State: POWER");
+    LOG_POWERFSM("State: powerEnter");
     if (!isPowered()) {
         // If we got here, we are in the wrong state - we should be in powered, let that state handle things
         LOG_INFO("Loss of power in Powered");
@@ -210,6 +212,7 @@ static void powerEnter()
 
 static void powerIdle()
 {
+    // LOG_POWERFSM("State: powerIdle"); // very chatty
     if (!isPowered()) {
         // If we got here, we are in the wrong state
         LOG_INFO("Loss of power in Powered");
@@ -219,14 +222,13 @@ static void powerIdle()
 
 static void powerExit()
 {
-    if (screen)
-        screen->setOn(true);
+    LOG_POWERFSM("State: powerExit");
     setBluetoothEnable(true);
 }
 
 static void onEnter()
 {
-    LOG_DEBUG("State: ON");
+    LOG_POWERFSM("State: onEnter");
     if (screen)
         screen->setOn(true);
     setBluetoothEnable(true);
@@ -234,6 +236,7 @@ static void onEnter()
 
 static void onIdle()
 {
+    LOG_POWERFSM("State: onIdle");
     if (isPowered()) {
         // If we got here, we are in the wrong state - we should be in powered, let that state handle things
         powerFSM.trigger(EVENT_POWER_CONNECTED);
@@ -242,7 +245,7 @@ static void onIdle()
 
 static void bootEnter()
 {
-    LOG_DEBUG("State: BOOT");
+    LOG_POWERFSM("State: bootEnter");
 }
 
 State stateSHUTDOWN(shutdownEnter, NULL, NULL, "SHUTDOWN");
@@ -319,11 +322,6 @@ void PowerFSM_setup()
         // if any packet destined for phone arrives, turn on bluetooth at least
         powerFSM.add_transition(&stateNB, &stateDARK, EVENT_PACKET_FOR_PHONE, NULL, "Packet for phone");
 
-        // Removed 2.7: we don't show the nodes individually for every node on the screen anymore
-        // powerFSM.add_transition(&stateNB, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
-        // powerFSM.add_transition(&stateDARK, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
-        // powerFSM.add_transition(&stateON, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
-
         // Show the received text message
         powerFSM.add_transition(&stateLS, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
         powerFSM.add_transition(&stateNB, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
@@ -372,7 +370,7 @@ void PowerFSM_setup()
     // Don't add power saving transitions if we are a power saving tracker or sensor or have Wifi enabled. Sleep will be initiated
     // through the modules
 
-#if HAS_WIFI || !defined(MESHTASTIC_EXCLUDE_WIFI)
+#if HAS_WIFI && !defined(MESHTASTIC_EXCLUDE_WIFI)
     bool isTrackerOrSensor = config.device.role == meshtastic_Config_DeviceConfig_Role_TRACKER ||
                              config.device.role == meshtastic_Config_DeviceConfig_Role_TAK_TRACKER ||
                              config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;

src/PowerFSM.h

@@ -2,6 +2,12 @@
 
 #include "configuration.h"
 
+#ifdef PowerFSMDebug
+#define LOG_POWERFSM(...) LOG_DEBUG(__VA_ARGS__)
+#else
+#define LOG_POWERFSM(...)
+#endif
+
 // See sw-design.md for documentation
 
 #define EVENT_PRESS 1

src/airtime.cpp

@@ -133,12 +133,11 @@ bool AirTime::isTxAllowedChannelUtil(bool polite)
 
 bool AirTime::isTxAllowedAirUtil()
 {
-    float effectiveDutyCycle = getEffectiveDutyCycle();
-    if (!config.lora.override_duty_cycle && effectiveDutyCycle < 100) {
-        if (utilizationTXPercent() < effectiveDutyCycle * polite_duty_cycle_percent / 100) {
+    if (!config.lora.override_duty_cycle && myRegion->dutyCycle < 100) {
+        if (utilizationTXPercent() < myRegion->dutyCycle * polite_duty_cycle_percent / 100) {
             return true;
         } else {
-            LOG_WARN("TX air util. >%f%%. Skip send", effectiveDutyCycle * polite_duty_cycle_percent / 100);
+            LOG_WARN("TX air util. >%f%%. Skip send", myRegion->dutyCycle * polite_duty_cycle_percent / 100);
             return false;
         }
     }

src/configuration.h

@@ -250,8 +250,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Touchscreen
 // -----------------------------------------------------------------------------
 #define FT6336U_ADDR 0x48
-#define CST328_ADDR 0x1A
+#define CST328_ADDR 0x1A // same address as CST226SE
 #define CHSC6X_ADDR 0x2E
+#define CST226SE_ADDR_ALT 0x5A
 
 // -----------------------------------------------------------------------------
 // RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)
@@ -396,6 +397,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define HAS_RGB_LED
 #endif
 
+#ifndef LED_STATE_OFF
+#define LED_STATE_OFF 0
+#endif
+#ifndef LED_STATE_ON
+#define LED_STATE_ON 1
+#endif
+
 // default mapping of pins
 #if defined(PIN_BUTTON2) && !defined(CANCEL_BUTTON_PIN)
 #define ALT_BUTTON_PIN PIN_BUTTON2

src/detect/ScanI2C.h

@@ -85,7 +85,8 @@ class ScanI2C
         DRV2605,
         BH1750,
         DA217,
-        CHSC6X
+        CHSC6X,
+        CST226SE
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -499,7 +499,18 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(DFROBOT_RAIN_ADDR, DFROBOT_RAIN, "DFRobot Rain Gauge", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(LTR390UV_ADDR, LTR390UV, "LTR390UV", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(PCT2075_ADDR, PCT2075, "PCT2075", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(CST328_ADDR, CST328, "CST328", (uint8_t)addr.address);
+            case CST328_ADDR:
+                // Do we have the CST328 or the CST226SE
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xAB), 1);
+                if (registerValue == 0xA9) {
+                    type = CST226SE;
+                    logFoundDevice("CST226SE", (uint8_t)addr.address);
+                } else {
+                    type = CST328;
+                    logFoundDevice("CST328", (uint8_t)addr.address);
+                }
+                break;
+
                 SCAN_SIMPLE_CASE(CHSC6X_ADDR, CHSC6X, "CHSC6X", (uint8_t)addr.address);
             case LTR553ALS_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x86), 1); // Part ID register
@@ -528,8 +539,12 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 #endif
 
             case MLX90614_ADDR_DEF:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0e), 1);
-                if (registerValue == 0x5a) {
+                // Do we have the MLX90614 or the MPR121KB or the CST226SE
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x06), 1);
+                if (registerValue == 0xAB) {
+                    type = CST226SE;
+                    logFoundDevice("CST226SE", (uint8_t)addr.address);
+                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0e), 1) == 0x5a) {
                     type = MLX90614;
                     logFoundDevice("MLX90614", (uint8_t)addr.address);
                 } else {
@@ -547,6 +562,11 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
             case ICM20948_ADDR:     // same as BMX160_ADDR
             case ICM20948_ADDR_ALT: // same as MPU6050_ADDR
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
+#ifdef HAS_ICM20948
+                type = ICM20948;
+                logFoundDevice("ICM20948", (uint8_t)addr.address);
+                break;
+#endif
                 if (registerValue == 0xEA) {
                     type = ICM20948;
                     logFoundDevice("ICM20948", (uint8_t)addr.address);

src/gps/GPS.cpp

@@ -38,14 +38,16 @@ template <typename T, std::size_t N> std::size_t array_count(const T (&)[N])
     return N;
 }
 
-#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
-#if defined(GPS_SERIAL_PORT)
-HardwareSerial *GPS::_serial_gps = &GPS_SERIAL_PORT;
-#else
-HardwareSerial *GPS::_serial_gps = &Serial1;
+#ifndef GPS_SERIAL_PORT
+#define GPS_SERIAL_PORT Serial1
 #endif
+
+#if defined(ARCH_NRF52)
+Uart *GPS::_serial_gps = &GPS_SERIAL_PORT;
+#elif defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
+HardwareSerial *GPS::_serial_gps = &GPS_SERIAL_PORT;
 #elif defined(ARCH_RP2040)
-SerialUART *GPS::_serial_gps = &Serial1;
+SerialUART *GPS::_serial_gps = &GPS_SERIAL_PORT;
 #else
 HardwareSerial *GPS::_serial_gps = nullptr;
 #endif
@@ -1525,10 +1527,7 @@ GPS *GPS::createGps()
     int8_t _rx_gpio = config.position.rx_gpio;
     int8_t _tx_gpio = config.position.tx_gpio;
     int8_t _en_gpio = config.position.gps_en_gpio;
-#if HAS_GPS && !defined(ARCH_ESP32)
-    _rx_gpio = 1; // We only specify GPS serial ports on ESP32. Otherwise, these are just flags.
-    _tx_gpio = 1;
-#endif
+
 #if defined(GPS_RX_PIN)
     if (!_rx_gpio)
         _rx_gpio = GPS_RX_PIN;
@@ -1602,16 +1601,28 @@ GPS *GPS::createGps()
         _serial_gps->setRxBufferSize(SERIAL_BUFFER_SIZE); // the default is 256
 #endif
 
-//  ESP32 has a special set of parameters vs other arduino ports
-#if defined(ARCH_ESP32)
         LOG_DEBUG("Use GPIO%d for GPS RX", new_gps->rx_gpio);
         LOG_DEBUG("Use GPIO%d for GPS TX", new_gps->tx_gpio);
+
+//  ESP32 has a special set of parameters vs other arduino ports
+#if defined(ARCH_ESP32)
         _serial_gps->begin(GPS_BAUDRATE, SERIAL_8N1, new_gps->rx_gpio, new_gps->tx_gpio);
 #elif defined(ARCH_RP2040)
+        _serial_gps->setPinout(new_gps->tx_gpio, new_gps->rx_gpio);
         _serial_gps->setFIFOSize(256);
         _serial_gps->begin(GPS_BAUDRATE);
-#else
+#elif defined(ARCH_NRF52)
+        _serial_gps->setPins(new_gps->rx_gpio, new_gps->tx_gpio);
         _serial_gps->begin(GPS_BAUDRATE);
+#elif defined(ARCH_STM32WL)
+        _serial_gps->setTx(new_gps->tx_gpio);
+        _serial_gps->setRx(new_gps->rx_gpio);
+        _serial_gps->begin(GPS_BAUDRATE);
+#elif defined(ARCH_PORTDUINO)
+        // Portduino can't set the GPS pins directly.
+        _serial_gps->begin(GPS_BAUDRATE);
+#else
+#error Unsupported architecture!
 #endif
     }
     return new_gps;

src/gps/GPS.h

@@ -194,6 +194,8 @@ class GPS : private concurrency::OSThread
     /** If !NULL we will use this serial port to construct our GPS */
 #if defined(ARCH_RP2040)
     static SerialUART *_serial_gps;
+#elif defined(ARCH_NRF52)
+    static Uart *_serial_gps;
 #else
     static HardwareSerial *_serial_gps;
 #endif

src/gps/RTC.cpp

@@ -112,7 +112,11 @@ RTCSetResult readFromRTC()
 #elif defined(RX8130CE_RTC)
     if (rtc_found.address == RX8130CE_RTC) {
         uint32_t now = millis();
+#ifdef MUZI_BASE
+        ArtronShop_RX8130CE rtc(&Wire1);
+#else
         ArtronShop_RX8130CE rtc(&Wire);
+#endif
         tm t;
         if (rtc.getTime(&t)) {
             tv.tv_sec = gm_mktime(&t);
@@ -245,7 +249,11 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
         }
 #elif defined(RX8130CE_RTC)
         if (rtc_found.address == RX8130CE_RTC) {
+#ifdef MUZI_BASE
+            ArtronShop_RX8130CE rtc(&Wire1);
+#else
             ArtronShop_RX8130CE rtc(&Wire);
+#endif
             tm *t = gmtime(&tv->tv_sec);
             if (rtc.setTime(*t)) {
                 LOG_DEBUG("RX8130CE setDateTime %02d-%02d-%02d %02d:%02d:%02d (%ld)", t->tm_year + 1900, t->tm_mon + 1,

src/graphics/Screen.cpp

@@ -324,7 +324,7 @@ static int8_t prevFrame = -1;
 // Combined dynamic node list frame cycling through LastHeard, HopSignal, and Distance modes
 // Uses a single frame and changes data every few seconds (E-Ink variant is separate)
 
-#if defined(ESP_PLATFORM) && defined(USE_ST7789)
+#if defined(ESP_PLATFORM) && (defined(USE_ST7789) || defined(USE_ST7796))
 SPIClass SPI1(HSPI);
 #endif
 
@@ -356,7 +356,13 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
 #else
     dispdev = new ST7789Spi(&SPI1, ST7789_RESET, ST7789_RS, ST7789_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT);
 #endif
-    static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
+#elif defined(USE_ST7796)
+#ifdef ESP_PLATFORM
+    dispdev = new ST7796Spi(&SPI1, ST7796_RESET, ST7796_RS, ST7796_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT, ST7796_SDA,
+                            ST7796_MISO, ST7796_SCK, TFT_SPI_FREQUENCY);
+#else
+    dispdev = new ST7796Spi(&SPI1, ST7796_RESET, ST7796_RS, ST7796_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT);
+#endif
 #elif defined(USE_SSD1306)
     dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
                               (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
@@ -369,7 +375,7 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
         LOG_INFO("SSD1306 init success");
     }
 #elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7789_CS) ||    \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(HACKADAY_COMMUNICATOR)
     dispdev = new TFTDisplay(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
@@ -399,6 +405,12 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
     isAUTOOled = true;
 #endif
 
+#if defined(USE_ST7789)
+    static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
+#elif defined(USE_ST7796)
+    static_cast<ST7796Spi *>(dispdev)->setRGB(TFT_MESH);
+#endif
+
     ui = new OLEDDisplayUi(dispdev);
     cmdQueue.setReader(this);
 }
@@ -435,6 +447,14 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             PMU->enablePowerOutput(XPOWERS_ALDO2);
 #endif
 
+#if defined(MUZI_BASE)
+            dispdev->init();
+            dispdev->setBrightness(brightness);
+            dispdev->flipScreenVertically();
+            dispdev->resetDisplay();
+            digitalWrite(SCREEN_12V_ENABLE, HIGH);
+            delay(100);
+#endif
 #if !ARCH_PORTDUINO
             dispdev->displayOn();
 #endif
@@ -466,6 +486,15 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             pinMode(VTFT_LEDA, OUTPUT);
             digitalWrite(VTFT_LEDA, TFT_BACKLIGHT_ON);
 #endif
+#endif
+#ifdef USE_ST7796
+            ui->init();
+#ifdef ESP_PLATFORM
+            analogWrite(VTFT_LEDA, BRIGHTNESS_DEFAULT);
+#else
+            pinMode(VTFT_LEDA, OUTPUT);
+            digitalWrite(VTFT_LEDA, TFT_BACKLIGHT_ON);
+#endif
 #endif
             enabled = true;
             setInterval(0); // Draw ASAP
@@ -484,6 +513,10 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #endif
 
             dispdev->displayOff();
+
+#ifdef SCREEN_12V_ENABLE
+            digitalWrite(SCREEN_12V_ENABLE, LOW);
+#endif
 #ifdef USE_ST7789
             SPI1.end();
 #if defined(ARCH_ESP32)
@@ -500,6 +533,21 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             nrf_gpio_cfg_default(ST7789_NSS);
 #endif
 #endif
+#ifdef USE_ST7796
+            SPI1.end();
+#if defined(ARCH_ESP32)
+            pinMode(VTFT_LEDA, OUTPUT);
+            digitalWrite(VTFT_LEDA, LOW);
+            pinMode(ST7796_RESET, ANALOG);
+            pinMode(ST7796_RS, ANALOG);
+            pinMode(ST7796_NSS, ANALOG);
+#else
+            nrf_gpio_cfg_default(VTFT_LEDA);
+            nrf_gpio_cfg_default(ST7796_RESET);
+            nrf_gpio_cfg_default(ST7796_RS);
+            nrf_gpio_cfg_default(ST7796_NSS);
+#endif
+#endif
 
 #ifdef T_WATCH_S3
             PMU->disablePowerOutput(XPOWERS_ALDO2);
@@ -534,7 +582,7 @@ void Screen::setup()
         static_cast<AutoOLEDWire *>(dispdev)->setDetected(model);
 #endif
 
-#ifdef USE_SH1107_128_64
+#if defined(USE_SH1107_128_64) || defined(USE_SH1107)
     static_cast<SH1106Wire *>(dispdev)->setSubtype(7);
 #endif
 
@@ -542,6 +590,13 @@ void Screen::setup()
     // Apply custom RGB color (e.g. Heltec T114/T190)
     static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
 #endif
+#if defined(MUZI_BASE)
+    dispdev->delayPoweron = true;
+#endif
+#if defined(USE_ST7796) && defined(TFT_MESH)
+    // Custom text color, if defined in variant.h
+    static_cast<ST7796Spi *>(dispdev)->setRGB(TFT_MESH);
+#endif
 
     // === Initialize display and UI system ===
     ui->init();
@@ -601,10 +656,12 @@ void Screen::setup()
 #else
     if (!config.display.flip_screen) {
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) ||      \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(HACKADAY_COMMUNICATOR)
         static_cast<TFTDisplay *>(dispdev)->flipScreenVertically();
 #elif defined(USE_ST7789)
         static_cast<ST7789Spi *>(dispdev)->flipScreenVertically();
+#elif defined(USE_ST7796)
+        static_cast<ST7796Spi *>(dispdev)->mirrorScreen();
 #elif !defined(M5STACK_UNITC6L)
         dispdev->flipScreenVertically();
 #endif
@@ -637,7 +694,7 @@ void Screen::setup()
             touchScreenImpl1->init();
         }
     }
-#elif HAS_TOUCHSCREEN && !defined(USE_EINK)
+#elif HAS_TOUCHSCREEN && !defined(USE_EINK) && !HAS_CST226SE
     touchScreenImpl1 =
         new TouchScreenImpl1(dispdev->getWidth(), dispdev->getHeight(), static_cast<TFTDisplay *>(dispdev)->getTouch);
     touchScreenImpl1->init();
@@ -1549,6 +1606,7 @@ int Screen::handleUIFrameEvent(const UIFrameEvent *event)
 
 int Screen::handleInputEvent(const InputEvent *event)
 {
+    LOG_INPUT("Screen Input event %u! kb %u", event->inputEvent, event->kbchar);
     if (!screenOn)
         return 0;
 

src/graphics/Screen.h

@@ -83,6 +83,8 @@ class Screen
 #include <ST7789Spi.h>
 #elif defined(USE_SPISSD1306)
 #include <SSD1306Spi.h>
+#elif defined(USE_ST7796)
+#include <ST7796Spi.h>
 #else
 // the SH1106/SSD1306 variant is auto-detected
 #include <AutoOLEDWire.h>
@@ -249,6 +251,8 @@ class Screen : public concurrency::OSThread
 
     bool isOverlayBannerShowing();
 
+    bool isScreenOn() { return screenOn; }
+
     // Stores the last 4 of our hardware ID, to make finding the device for pairing easier
     // FIXME: Needs refactoring and getMacAddr needs to be moved to a utility class
     char ourId[5];

src/graphics/ScreenFonts.h

@@ -73,7 +73,8 @@
 #endif
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)) &&            \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) ||             \
+     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) &&                                                                   \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL FONT_MEDIUM_LOCAL // Height: 19

src/graphics/SharedUIDisplay.cpp

@@ -17,6 +17,12 @@ namespace graphics
 
 void determineResolution(int16_t screenheight, int16_t screenwidth)
 {
+
+#ifdef FORCE_LOW_RES
+    isHighResolution = false;
+    return;
+#endif
+
     if (screenwidth > 128) {
         isHighResolution = true;
     }
@@ -24,11 +30,6 @@ void determineResolution(int16_t screenheight, int16_t screenwidth)
     if (screenwidth > 128 && screenheight <= 64) {
         isHighResolution = false;
     }
-
-    // Special case for Heltec Wireless Tracker v1.1
-    if (screenwidth == 160 && screenheight == 80) {
-        isHighResolution = false;
-    }
 }
 
 // === Shared External State ===

src/graphics/TFTDisplay.cpp

@@ -123,6 +123,11 @@ static void rak14014_tpIntHandle(void)
     _rak14014_touch_int = true;
 }
 
+#elif defined(HACKADAY_COMMUNICATOR)
+#include <Arduino_GFX_Library.h>
+Arduino_DataBus *bus = nullptr;
+Arduino_GFX *tft = nullptr;
+
 #elif defined(ST72xx_DE)
 #include <LovyanGFX.hpp>
 #include <TCA9534.h>
@@ -427,33 +432,35 @@ static LGFX *tft = nullptr;
 #include "lgfx/v1/Touch.hpp"
 namespace lgfx
 {
- inline namespace v1
- {
+inline namespace v1
+{
 class TOUCH_CHSC6X : public ITouch
 {
-public:
+  public:
     TOUCH_CHSC6X(void)
     {
-      _cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
-      _cfg.x_min = 0;
-      _cfg.x_max = 240;
-      _cfg.y_min = 0;
-      _cfg.y_max = 320;
+        _cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
+        _cfg.x_min = 0;
+        _cfg.x_max = 240;
+        _cfg.y_min = 0;
+        _cfg.y_max = 320;
     };
 
-    bool init(void) override {
-        if(chsc6xTouch==nullptr) {
-            chsc6xTouch=new chsc6x(&Wire1,TOUCH_SDA_PIN,TOUCH_SCL_PIN,TOUCH_INT_PIN,TOUCH_RST_PIN);
+    bool init(void) override
+    {
+        if (chsc6xTouch == nullptr) {
+            chsc6xTouch = new chsc6x(&Wire1, TOUCH_SDA_PIN, TOUCH_SCL_PIN, TOUCH_INT_PIN, TOUCH_RST_PIN);
         }
         chsc6xTouch->chsc6x_init();
         return true;
     };
 
-    uint_fast8_t getTouchRaw(touch_point_t* tp, uint_fast8_t count) override {
-        uint16_t raw_x,raw_y;
-        if (chsc6xTouch->chsc6x_read_touch_info(&raw_x, &raw_y)==0) {
-            tp[0].x = 320-1-raw_y;
-            tp[0].y = 240-1-raw_x ;
+    uint_fast8_t getTouchRaw(touch_point_t *tp, uint_fast8_t count) override
+    {
+        uint16_t raw_x, raw_y;
+        if (chsc6xTouch->chsc6x_read_touch_info(&raw_x, &raw_y) == 0) {
+            tp[0].x = 320 - 1 - raw_y;
+            tp[0].y = 240 - 1 - raw_x;
             tp[0].size = 1;
             tp[0].id = 1;
             return 1;
@@ -462,13 +469,14 @@ public:
         return 0;
     };
 
-    void wakeup(void) override {};
-    void sleep(void) override {};
+    void wakeup(void) override{};
+    void sleep(void) override{};
+
   private:
-    chsc6x *chsc6xTouch=nullptr;
-  };
-}
-}
+    chsc6x *chsc6xTouch = nullptr;
+};
+} // namespace v1
+} // namespace lgfx
 #endif
 class LGFX : public lgfx::LGFX_Device
 {
@@ -513,9 +521,9 @@ class LGFX : public lgfx::LGFX_Device
         {                                        // Set the display panel control.
             auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
 
-            cfg.pin_cs = ST7789_CS; // Pin number where CS is connected (-1 = disable)
-            cfg.pin_rst = ST7789_RESET;       // Pin number where RST is connected  (-1 = disable)
-            cfg.pin_busy = ST7789_BUSY;      // Pin number where BUSY is connected (-1 = disable)
+            cfg.pin_cs = ST7789_CS;     // Pin number where CS is connected (-1 = disable)
+            cfg.pin_rst = ST7789_RESET; // Pin number where RST is connected  (-1 = disable)
+            cfg.pin_busy = ST7789_BUSY; // Pin number where BUSY is connected (-1 = disable)
 
             // The following setting values ​​are general initial values ​​for each panel, so please comment out any
             // unknown items and try them.
@@ -1132,7 +1140,7 @@ static LGFX *tft = nullptr;
 
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ST7796_CS) || defined(ILI9341_DRIVER) ||           \
     defined(ILI9342_DRIVER) || defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST72xx_DE) ||           \
-    (ARCH_PORTDUINO && HAS_SCREEN != 0)
+    (ARCH_PORTDUINO && HAS_SCREEN != 0) || defined(HACKADAY_COMMUNICATOR)
 #include "SPILock.h"
 #include "TFTDisplay.h"
 #include <SPI.h>
@@ -1268,12 +1276,15 @@ void TFTDisplay::display(bool fromBlank)
                     x_LastPixelUpdate = x;
                 }
             }
-
+#if defined(HACKADAY_COMMUNICATOR)
+            tft->draw16bitBeRGBBitmap(x_FirstPixelUpdate, y, &linePixelBuffer[x_FirstPixelUpdate],
+                                      (x_LastPixelUpdate - x_FirstPixelUpdate + 1), 1);
+#else
             // Step 4: Send the changed pixels on this line to the screen as a single block transfer.
             // This function accepts pixel data MSB first so it can dump the memory straight out the SPI port.
             tft->pushRect(x_FirstPixelUpdate, y, (x_LastPixelUpdate - x_FirstPixelUpdate + 1), 1,
                           &linePixelBuffer[x_FirstPixelUpdate]);
-
+#endif
             somethingChanged = true;
         }
         y++;
@@ -1337,6 +1348,8 @@ void TFTDisplay::sendCommand(uint8_t com)
         display(true);
         if (portduino_config.displayBacklight.pin > 0)
             digitalWrite(portduino_config.displayBacklight.pin, TFT_BACKLIGHT_ON);
+#elif defined(HACKADAY_COMMUNICATOR)
+        tft->displayOn();
 #elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
         tft->wakeup();
         tft->powerSaveOff();
@@ -1349,7 +1362,8 @@ void TFTDisplay::sendCommand(uint8_t com)
         unphone.backlight(true); // using unPhone library
 #endif
 #ifdef RAK14014
-#elif !defined(M5STACK) && !defined(ST7789_CS) // T-Deck gets brightness set in Screen.cpp in the handleSetOn function
+#elif !defined(M5STACK) && !defined(ST7789_CS) &&                                                                                \
+    !defined(HACKADAY_COMMUNICATOR) // T-Deck gets brightness set in Screen.cpp in the handleSetOn function
         tft->setBrightness(172);
 #endif
         break;
@@ -1361,6 +1375,8 @@ void TFTDisplay::sendCommand(uint8_t com)
         tft->clear();
         if (portduino_config.displayBacklight.pin > 0)
             digitalWrite(portduino_config.displayBacklight.pin, !TFT_BACKLIGHT_ON);
+#elif defined(HACKADAY_COMMUNICATOR)
+        tft->displayOff();
 #elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
         tft->sleep();
         tft->powerSaveOn();
@@ -1373,7 +1389,7 @@ void TFTDisplay::sendCommand(uint8_t com)
         unphone.backlight(false); // using unPhone library
 #endif
 #ifdef RAK14014
-#elif !defined(M5STACK)
+#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
         tft->setBrightness(0);
 #endif
         break;
@@ -1389,7 +1405,7 @@ void TFTDisplay::setDisplayBrightness(uint8_t _brightness)
 {
 #ifdef RAK14014
     // todo
-#else
+#elif !defined(HACKADAY_COMMUNICATOR)
     tft->setBrightness(_brightness);
     LOG_DEBUG("Brightness is set to value: %i ", _brightness);
 #endif
@@ -1407,7 +1423,7 @@ bool TFTDisplay::hasTouch(void)
 {
 #ifdef RAK14014
     return true;
-#elif !defined(M5STACK)
+#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
     return tft->touch() != nullptr;
 #else
     return false;
@@ -1426,7 +1442,7 @@ bool TFTDisplay::getTouch(int16_t *x, int16_t *y)
     } else {
         return false;
     }
-#elif !defined(M5STACK)
+#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
     return tft->getTouch(x, y);
 #else
     return false;
@@ -1445,6 +1461,12 @@ bool TFTDisplay::connect()
     LOG_INFO("Do TFT init");
 #ifdef RAK14014
     tft = new TFT_eSPI;
+#elif defined(HACKADAY_COMMUNICATOR)
+    bus = new Arduino_ESP32SPI(TFT_DC, TFT_CS, 38 /* SCK */, 21 /* MOSI */, GFX_NOT_DEFINED /* MISO */, HSPI /* spi_num */);
+    tft = new Arduino_NV3007(bus, 40, 0 /* rotation */, false /* IPS */, 142 /* width */, 428 /* height */, 12 /* col offset 1 */,
+                             0 /* row offset 1 */, 14 /* col offset 2 */, 0 /* row offset 2 */, nv3007_279_init_operations,
+                             sizeof(nv3007_279_init_operations));
+
 #else
     tft = new LGFX;
 #endif
@@ -1455,8 +1477,15 @@ bool TFTDisplay::connect()
 #ifdef UNPHONE
     unphone.backlight(true); // using unPhone library
 #endif
-
+#ifdef HACKADAY_COMMUNICATOR
+    bool beginStatus = tft->begin();
+    if (beginStatus)
+        LOG_DEBUG("TFT Success!");
+    else
+        LOG_ERROR("TFT Fail!");
+#else
     tft->init();
+#endif
 
 #if defined(M5STACK)
     tft->setRotation(0);

src/graphics/TimeFormatters.cpp

@@ -101,3 +101,23 @@ void getTimeAgoStr(uint32_t agoSecs, char *timeStr, uint8_t maxLength)
     else
         snprintf(timeStr, maxLength, "unknown age");
 }
+
+void getUptimeStr(uint32_t uptimeMillis, const char *prefix, char *uptimeStr, uint8_t maxLength, bool includeSecs)
+{
+    uint32_t days = uptimeMillis / 86400000;
+    uint32_t hours = (uptimeMillis % 86400000) / 3600000;
+    uint32_t mins = (uptimeMillis % 3600000) / 60000;
+    uint32_t secs = (uptimeMillis % 60000) / 1000;
+
+    if (days) {
+        snprintf(uptimeStr, maxLength, "%s: %ud %uh", prefix, days, hours);
+    } else if (hours) {
+        snprintf(uptimeStr, maxLength, "%s: %uh %um", prefix, hours, mins);
+    } else if (!includeSecs) {
+        snprintf(uptimeStr, maxLength, "%s: %um", prefix, mins);
+    } else if (mins) {
+        snprintf(uptimeStr, maxLength, "%s: %um %us", prefix, mins, secs);
+    } else {
+        snprintf(uptimeStr, maxLength, "%s: %us", prefix, secs);
+    }
+}

src/graphics/TimeFormatters.h

@@ -24,3 +24,10 @@ bool deltaToTimestamp(uint32_t secondsAgo, uint8_t *hours, uint8_t *minutes, int
  * @param maxLength Maximum length of the resulting string buffer
  */
 void getTimeAgoStr(uint32_t agoSecs, char *timeStr, uint8_t maxLength);
+
+/**
+ * Get a compact human-readable string that only shows the largest non-zero time components.
+ * For example, 0 days 1 hour 2 minutes will display as "1h 2m" but 1 day 2 hours 3 minutes
+ * will display as "1d 2h".
+ */
+void getUptimeStr(uint32_t uptimeMillis, const char *prefix, char *uptimeStr, uint8_t maxLength, bool includeSecs = false);

src/graphics/draw/DebugRenderer.cpp

@@ -11,6 +11,7 @@
 #include "gps/RTC.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
+#include "graphics/TimeFormatters.h"
 #include "graphics/images.h"
 #include "main.h"
 #include "mesh/Channels.h"
@@ -96,7 +97,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
                                           (storeForwardModule->heartbeatInterval * 1200))) { // no heartbeat, overlap a bit
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
-     ARCH_PORTDUINO) &&                                                                                                          \
+     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796) || ARCH_PORTDUINO) &&                                                 \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12,
                                    8, imgQuestionL1);
@@ -108,7 +109,8 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
 #endif
         } else {
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS)) &&            \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
+     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) &&                                                                   \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 16,
                                    8, imgSFL1);
@@ -124,7 +126,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
         // TODO: Raspberry Pi supports more than just the one screen size
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
-     ARCH_PORTDUINO) &&                                                                                                          \
+     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796) || ARCH_PORTDUINO) &&                                                 \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
         display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                imgInfoL1);
@@ -650,17 +652,7 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
 
     if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line <= 5)) { // Only show uptime if the screen can show it
         char uptimeStr[32] = "";
-        uint32_t uptime = millis() / 1000;
-        uint32_t days = uptime / 86400;
-        uint32_t hours = (uptime % 86400) / 3600;
-        uint32_t mins = (uptime % 3600) / 60;
-        // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
-        if (days)
-            snprintf(uptimeStr, sizeof(uptimeStr), " Up: %ud %uh", days, hours);
-        else if (hours)
-            snprintf(uptimeStr, sizeof(uptimeStr), " Up: %uh %um", hours, mins);
-        else
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %um", mins);
+        getUptimeStr(millis(), "Up", uptimeStr, sizeof(uptimeStr));
         textWidth = display->getStringWidth(uptimeStr);
         nameX = (SCREEN_WIDTH - textWidth) / 2;
         display->drawString(nameX, getTextPositions(display)[line++], uptimeStr);
@@ -729,4 +721,4 @@ void drawChirpy(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int1
 
 } // namespace DebugRenderer
 } // namespace graphics
-#endif
+#endif

src/graphics/draw/MenuHandler.cpp

@@ -102,8 +102,7 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
                                          "KZ_433",
                                          "KZ_863",
                                          "NP_865",
-                                         "BR_902",
-                                         "EU_866"};
+                                         "BR_902"};
     BannerOverlayOptions bannerOptions;
 #if defined(M5STACK_UNITC6L)
     bannerOptions.message = "LoRa Region";
@@ -112,7 +111,7 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
 #endif
     bannerOptions.durationMs = duration;
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 28;
+    bannerOptions.optionsCount = 27;
     bannerOptions.InitialSelected = 0;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected != 0 && config.lora.region != _meshtastic_Config_LoRaConfig_RegionCode(selected)) {
@@ -120,29 +119,11 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
             auto changes = SEGMENT_CONFIG;
 
             // This is needed as we wait til picking the LoRa region to generate keys for the first time.
-            if (!owner.is_licensed) {
-                bool keygenSuccess = false;
-                if (config.security.private_key.size == 32) {
-                    // public key is derived from private, so this will always have the same result.
-                    if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
-                        keygenSuccess = true;
-                    }
-
-                } else {
-                    LOG_INFO("Generate new PKI keys");
-                    crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes);
-                    keygenSuccess = true;
-                }
-                if (keygenSuccess) {
-                    config.security.public_key.size = 32;
-                    config.security.private_key.size = 32;
-                    owner.public_key.size = 32;
-                    memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
-                }
-            }
+            // Use consolidated key generation function
+            nodeDB->generateCryptoKeyPair();
             config.lora.tx_enabled = true;
             initRegion();
-            if (getEffectiveDutyCycle() < 100) {
+            if (myRegion->dutyCycle < 100) {
                 config.lora.ignore_mqtt = true; // Ignore MQTT by default if region has a duty cycle limit
             }
 
@@ -195,8 +176,8 @@ void menuHandler::DeviceRolePicker()
 
 void menuHandler::RadioPresetPicker()
 {
-    static const char *optionsArray[] = {"Back",       "LongSlow",  "LongModerate", "LongFast",   "MediumSlow",
-                                         "MediumFast", "ShortSlow", "ShortFast",    "ShortTurbo", "LiteFast"};
+    static const char *optionsArray[] = {"Back",       "LongSlow",  "LongModerate", "LongFast",  "MediumSlow",
+                                         "MediumFast", "ShortSlow", "ShortFast",    "ShortTurbo"};
     enum optionsNumbers {
         Back = 0,
         radiopreset_LongSlow = 1,
@@ -206,13 +187,12 @@ void menuHandler::RadioPresetPicker()
         radiopreset_MediumFast = 5,
         radiopreset_ShortSlow = 6,
         radiopreset_ShortFast = 7,
-        radiopreset_ShortTurbo = 8,
-        radiopreset_LiteFast = 9
+        radiopreset_ShortTurbo = 8
     };
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Radio Preset";
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 10;
+    bannerOptions.optionsCount = 9;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == Back) {
             menuHandler::menuQueue = menuHandler::lora_Menu;
@@ -234,8 +214,6 @@ void menuHandler::RadioPresetPicker()
             config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST;
         } else if (selected == radiopreset_ShortTurbo) {
             config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO;
-        } else if (selected == radiopreset_LiteFast) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LITE_FAST;
         }
         service->reloadConfig(SEGMENT_CONFIG);
         rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
@@ -578,7 +556,7 @@ void menuHandler::textMessageBaseMenu()
 
 void menuHandler::systemBaseMenu()
 {
-    enum optionsNumbers { Back, Notifications, ScreenOptions, Bluetooth, PowerMenu, Test, enumEnd };
+    enum optionsNumbers { Back, Notifications, ScreenOptions, Bluetooth, WiFiToggle, PowerMenu, Test, enumEnd };
     static const char *optionsArray[enumEnd] = {"Back"};
     static int optionsEnumArray[enumEnd] = {Back};
     int options = 1;
@@ -594,6 +572,10 @@ void menuHandler::systemBaseMenu()
     optionsArray[options] = "Bluetooth Toggle";
 #endif
     optionsEnumArray[options++] = Bluetooth;
+#if HAS_WIFI && !defined(ARCH_PORTDUINO)
+    optionsArray[options] = "WiFi Toggle";
+    optionsEnumArray[options++] = WiFiToggle;
+#endif
 #if defined(M5STACK_UNITC6L)
     optionsArray[options] = "Power";
 #else
@@ -631,6 +613,11 @@ void menuHandler::systemBaseMenu()
         } else if (selected == Bluetooth) {
             menuQueue = bluetooth_toggle_menu;
             screen->runNow();
+#if HAS_WIFI && !defined(ARCH_PORTDUINO)
+        } else if (selected == WiFiToggle) {
+            menuQueue = wifi_toggle_menu;
+            screen->runNow();
+#endif
         } else if (selected == Back && !test_enabled) {
             test_count++;
             if (test_count > 4) {
@@ -939,7 +926,9 @@ void menuHandler::BluetoothToggleMenu()
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 3;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1 || selected == 2) {
+        if (selected == 0)
+            return;
+        else if (selected != (config.bluetooth.enabled ? 1 : 2)) {
             InputEvent event = {.inputEvent = (input_broker_event)170, .kbchar = 170, .touchX = 0, .touchY = 0};
             inputBroker->injectInputEvent(&event);
         }
@@ -1038,7 +1027,8 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 10;
     bannerOptions.bannerCallback = [display](int selected) -> void {
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) || HAS_TFT
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) ||          \
+    HAS_TFT || defined(HACKADAY_COMMUNICATOR)
         uint8_t TFT_MESH_r = 0;
         uint8_t TFT_MESH_g = 0;
         uint8_t TFT_MESH_b = 0;
@@ -1278,19 +1268,28 @@ void menuHandler::wifiBaseMenu()
 
 void menuHandler::wifiToggleMenu()
 {
-    enum optionsNumbers { Back, Wifi_toggle };
+    enum optionsNumbers { Back, Wifi_disable, Wifi_enable };
 
-    static const char *optionsArray[] = {"Back", "Disable"};
+    static const char *optionsArray[] = {"Back", "WiFi Disabled", "WiFi Enabled"};
     BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Disable Wifi and\nEnable Bluetooth?";
+    bannerOptions.message = "WiFi Actions";
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 2;
+    bannerOptions.optionsCount = 3;
+    if (config.network.wifi_enabled == true)
+        bannerOptions.InitialSelected = 2;
+    else
+        bannerOptions.InitialSelected = 1;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Wifi_toggle) {
+        if (selected == Wifi_disable) {
             config.network.wifi_enabled = false;
             config.bluetooth.enabled = true;
             service->reloadConfig(SEGMENT_CONFIG);
             rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
+        } else if (selected == Wifi_enable) {
+            config.network.wifi_enabled = true;
+            config.bluetooth.enabled = false;
+            service->reloadConfig(SEGMENT_CONFIG);
+            rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -1338,7 +1337,7 @@ void menuHandler::screenOptionsMenu()
     static int optionsEnumArray[5] = {Back};
     int options = 1;
 
-#if defined(T_DECK) || defined(T_LORA_PAGER)
+#if defined(T_DECK) || defined(T_LORA_PAGER) || defined(HACKADAY_COMMUNICATOR)
     optionsArray[options] = "Show Long/Short Name";
     optionsEnumArray[options++] = NodeNameLength;
 #endif
@@ -1350,12 +1349,13 @@ void menuHandler::screenOptionsMenu()
     }
 
     // Only show screen color for TFT displays
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) || HAS_TFT
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) ||          \
+    HAS_TFT || defined(HACKADAY_COMMUNICATOR)
     optionsArray[options] = "Screen Color";
     optionsEnumArray[options++] = ScreenColor;
 #endif
 
-    optionsArray[options] = "Frame Visiblity Toggle";
+    optionsArray[options] = "Frame Visibility Toggle";
     optionsEnumArray[options++] = FrameToggles;
 
     optionsArray[options] = "Display Units";
@@ -1752,4 +1752,4 @@ void menuHandler::saveUIConfig()
 
 } // namespace graphics
 
-#endif
+#endif

src/graphics/draw/UIRenderer.cpp

@@ -11,6 +11,7 @@
 #include "graphics/Screen.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
+#include "graphics/TimeFormatters.h"
 #include "graphics/images.h"
 #include "main.h"
 #include "target_specific.h"
@@ -256,7 +257,8 @@ void UIRenderer::drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const mes
     }
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS)) &&            \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
+     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) &&                                                                   \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 
     if (isHighResolution) {
@@ -383,17 +385,7 @@ void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *st
     // === 4. Uptime (only show if metric is present) ===
     char uptimeStr[32] = "";
     if (node->has_device_metrics && node->device_metrics.has_uptime_seconds) {
-        uint32_t uptime = node->device_metrics.uptime_seconds;
-        uint32_t days = uptime / 86400;
-        uint32_t hours = (uptime % 86400) / 3600;
-        uint32_t mins = (uptime % 3600) / 60;
-        // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
-        if (days)
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %ud %uh", days, hours);
-        else if (hours)
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %uh %um", hours, mins);
-        else
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %um", mins);
+        getUptimeStr(node->device_metrics.uptime_seconds * 1000, " Up", uptimeStr, sizeof(uptimeStr));
     }
     if (uptimeStr[0] && line < 5) {
         display->drawString(x, getTextPositions(display)[line++], uptimeStr);
@@ -592,18 +584,8 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
     drawNodes(display, x + 1, getTextPositions(display)[line] + 2, nodeStatus, -1, false, "online");
 #endif
     char uptimeStr[32] = "";
-    uint32_t uptime = millis() / 1000;
-    uint32_t days = uptime / 86400;
-    uint32_t hours = (uptime % 86400) / 3600;
-    uint32_t mins = (uptime % 3600) / 60;
-    // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
 #if !defined(M5STACK_UNITC6L)
-    if (days)
-        snprintf(uptimeStr, sizeof(uptimeStr), "Up: %ud %uh", days, hours);
-    else if (hours)
-        snprintf(uptimeStr, sizeof(uptimeStr), "Up: %uh %um", hours, mins);
-    else
-        snprintf(uptimeStr, sizeof(uptimeStr), "Up: %um", mins);
+    getUptimeStr(millis(), "Up", uptimeStr, sizeof(uptimeStr));
 #endif
     display->drawString(SCREEN_WIDTH - display->getStringWidth(uptimeStr), getTextPositions(display)[line++], uptimeStr);
 
@@ -1048,36 +1030,17 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
     if (strcmp(displayLine, "GPS off") != 0 && strcmp(displayLine, "No GPS") != 0) {
         // === Second Row: Last GPS Fix ===
         if (gpsStatus->getLastFixMillis() > 0) {
-            uint32_t delta = (millis() - gpsStatus->getLastFixMillis()) / 1000; // seconds since last fix
-            uint32_t days = delta / 86400;
-            uint32_t hours = (delta % 86400) / 3600;
-            uint32_t mins = (delta % 3600) / 60;
-            uint32_t secs = delta % 60;
-
-            char buf[32];
+            uint32_t delta = millis() - gpsStatus->getLastFixMillis();
+            char uptimeStr[32];
 #if defined(USE_EINK)
             // E-Ink: skip seconds, show only days/hours/mins
-            if (days > 0) {
-                snprintf(buf, sizeof(buf), "Last: %ud %uh", days, hours);
-            } else if (hours > 0) {
-                snprintf(buf, sizeof(buf), "Last: %uh %um", hours, mins);
-            } else {
-                snprintf(buf, sizeof(buf), "Last: %um", mins);
-            }
+            getUptimeStr(delta, "Last", uptimeStr, sizeof(uptimeStr), false);
 #else
             // Non E-Ink: include seconds where useful
-            if (days > 0) {
-                snprintf(buf, sizeof(buf), "Last: %ud %uh", days, hours);
-            } else if (hours > 0) {
-                snprintf(buf, sizeof(buf), "Last: %uh %um", hours, mins);
-            } else if (mins > 0) {
-                snprintf(buf, sizeof(buf), "Last: %um %us", mins, secs);
-            } else {
-                snprintf(buf, sizeof(buf), "Last: %us", secs);
-            }
+            getUptimeStr(delta, "Last", uptimeStr, sizeof(uptimeStr), true);
 #endif
 
-            display->drawString(0, getTextPositions(display)[line++], buf);
+            display->drawString(0, getTextPositions(display)[line++], uptimeStr);
         } else {
             display->drawString(0, getTextPositions(display)[line++], "Last: ?");
         }
@@ -1422,4 +1385,4 @@ std::string UIRenderer::drawTimeDelta(uint32_t days, uint32_t hours, uint32_t mi
 
 } // namespace graphics
 
-#endif // HAS_SCREEN
+#endif // HAS_SCREEN

src/graphics/images.h

@@ -28,7 +28,7 @@ const uint8_t bluetoothConnectedIcon[36] PROGMEM = {0xfe, 0x01, 0xff, 0x03, 0x03
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) ||             \
-     ARCH_PORTDUINO) &&                                                                                                          \
+     defined(USE_ST7796) || defined(HACKADAY_COMMUNICATOR) || ARCH_PORTDUINO) &&                                                 \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff};
 const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f};

src/graphics/niche/README.md

@@ -5,7 +5,6 @@ A pattern / collection of resources for creating custom UIs, to target small gro
 For an example, see the `heltec-vision-master-e290-inkhud` platformio env.
 
 - platformio.ini
-
   - suppress default Meshtastic components (Screen, ButtonThread, etc)
   - define `MESHTASTIC_INCLUDE_NICHE_GRAPHICS`
   - (possibly) Edit `build_src_filter` to include our new nicheGraphics.h file

src/input/HackadayCommunicatorKeyboard.cpp

@@ -0,0 +1,217 @@
+#if defined(HACKADAY_COMMUNICATOR)
+
+#include "HackadayCommunicatorKeyboard.h"
+#include "main.h"
+
+#define _TCA8418_COLS 10
+#define _TCA8418_ROWS 8
+#define _TCA8418_NUM_KEYS 80
+
+#define _TCA8418_MULTI_TAP_THRESHOLD 1500
+
+using Key = TCA8418KeyboardBase::TCA8418Key;
+
+constexpr uint8_t modifierRightShiftKey = 30;
+constexpr uint8_t modifierRightShift = 0b0001;
+constexpr uint8_t modifierLeftShiftKey = 76; // keynum -1
+constexpr uint8_t modifierLeftShift = 0b0001;
+// constexpr uint8_t modifierSymKey = 42;
+// constexpr uint8_t modifierSym = 0b0010;
+
+// Num chars per key, Modulus for rotating through characters
+static uint8_t HackadayCommunicatorTapMod[_TCA8418_NUM_KEYS] = {
+    0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+    0, 0, 0, 1, 1, 0, 1, 1, 1, 0, 0, 0, 1, 2, 2, 2, 2, 2, 2, 0, 0, 0, 1, 2, 2, 2, 1, 2, 2, 0, 0, 0, 2, 1, 2, 2, 0, 1, 1, 0,
+};
+
+static unsigned char HackadayCommunicatorTapMap[_TCA8418_NUM_KEYS][2] = {{},
+                                                                         {},
+                                                                         {'+'},
+                                                                         {'9'},
+                                                                         {'8'},
+                                                                         {'7'},
+                                                                         {'2'},
+                                                                         {'3'},
+                                                                         {'4'},
+                                                                         {'5'},
+                                                                         {Key::ESC},
+                                                                         {'q', 'Q'},
+                                                                         {'w', 'W'},
+                                                                         {'e', 'E'},
+                                                                         {'r', 'R'},
+                                                                         {'t', 'T'},
+                                                                         {'y', 'Y'},
+                                                                         {'u', 'U'},
+                                                                         {'i', 'I'},
+                                                                         {'o', 'O'},
+                                                                         {Key::TAB},
+                                                                         {'a', 'A'},
+                                                                         {'s', 'S'},
+                                                                         {'d', 'D'},
+                                                                         {'f', 'F'},
+                                                                         {'g', 'G'},
+                                                                         {'h', 'H'},
+                                                                         {'j', 'J'},
+                                                                         {'k', 'K'},
+                                                                         {'l', 'L'},
+                                                                         {},
+                                                                         {'z', 'Z'},
+                                                                         {'x', 'X'},
+                                                                         {'c', 'C'},
+                                                                         {'v', 'V'},
+                                                                         {'b', 'B'},
+                                                                         {'n', 'N'},
+                                                                         {'m', 'M'},
+                                                                         {',', '<'},
+                                                                         {'.', '>'},
+                                                                         {},
+                                                                         {},
+                                                                         {},
+                                                                         {'\\'},
+                                                                         {' '},
+                                                                         {},
+                                                                         {Key::RIGHT},
+                                                                         {Key::DOWN},
+                                                                         {Key::LEFT},
+                                                                         {},
+                                                                         {},
+                                                                         {},
+                                                                         {'-'},
+                                                                         {'6', '^'},
+                                                                         {'5', '%'},
+                                                                         {'4', '$'},
+                                                                         {'[', '{'},
+                                                                         {']', '}'},
+                                                                         {'p', 'P'},
+                                                                         {},
+                                                                         {},
+                                                                         {},
+                                                                         {'*'},
+                                                                         {'3', '#'},
+                                                                         {'2', '@'},
+                                                                         {'1', '!'},
+                                                                         {Key::SELECT},
+                                                                         {'\'', '"'},
+                                                                         {';', ':'},
+                                                                         {},
+                                                                         {},
+                                                                         {},
+                                                                         {'/', '?'},
+                                                                         {'='},
+                                                                         {'.', '>'},
+                                                                         {'0', ')'},
+                                                                         {},
+                                                                         {Key::UP},
+                                                                         {Key::BSP},
+                                                                         {}};
+
+HackadayCommunicatorKeyboard::HackadayCommunicatorKeyboard()
+    : TCA8418KeyboardBase(_TCA8418_ROWS, _TCA8418_COLS), modifierFlag(0), last_modifier_time(0), last_key(-1), next_key(-1),
+      last_tap(0L), char_idx(0), tap_interval(0)
+{
+    reset();
+}
+
+void HackadayCommunicatorKeyboard::reset(void)
+{
+    TCA8418KeyboardBase::reset();
+    enableInterrupts();
+}
+
+// handle multi-key presses (shift and alt)
+void HackadayCommunicatorKeyboard::trigger()
+{
+    uint8_t count = keyCount();
+    if (count == 0)
+        return;
+    for (uint8_t i = 0; i < count; ++i) {
+        uint8_t k = readRegister(TCA8418_REG_KEY_EVENT_A + i);
+        uint8_t key = k & 0x7F;
+        if (k & 0x80) {
+            pressed(key);
+        } else {
+            released();
+            state = Idle;
+        }
+    }
+}
+
+void HackadayCommunicatorKeyboard::pressed(uint8_t key)
+{
+    if (state == Init || state == Busy) {
+        return;
+    }
+
+    if (modifierFlag && (millis() - last_modifier_time > _TCA8418_MULTI_TAP_THRESHOLD)) {
+        modifierFlag = 0;
+    }
+
+    uint8_t next_key = 0;
+    int row = (key - 1) / 10;
+    int col = (key - 1) % 10;
+    if (row >= _TCA8418_ROWS || col >= _TCA8418_COLS) {
+        return; // Invalid key
+    }
+
+    next_key = row * _TCA8418_COLS + col;
+    state = Held;
+
+    uint32_t now = millis();
+    tap_interval = now - last_tap;
+
+    updateModifierFlag(next_key);
+    if (isModifierKey(next_key)) {
+        last_modifier_time = now;
+    }
+
+    if (tap_interval < 0) {
+        last_tap = 0;
+        state = Busy;
+        return;
+    }
+
+    if (next_key != last_key || tap_interval > _TCA8418_MULTI_TAP_THRESHOLD) {
+        char_idx = 0;
+    } else {
+        char_idx += 1;
+    }
+
+    last_key = next_key;
+    last_tap = now;
+}
+
+void HackadayCommunicatorKeyboard::released()
+{
+    if (state != Held) {
+        return;
+    }
+
+    if (last_key < 0 || last_key >= _TCA8418_NUM_KEYS) {
+        last_key = -1;
+        state = Idle;
+        return;
+    }
+
+    uint32_t now = millis();
+    last_tap = now;
+    if (HackadayCommunicatorTapMod[last_key])
+        queueEvent(HackadayCommunicatorTapMap[last_key][modifierFlag % HackadayCommunicatorTapMod[last_key]]);
+    if (isModifierKey(last_key) == false)
+        modifierFlag = 0;
+}
+
+void HackadayCommunicatorKeyboard::updateModifierFlag(uint8_t key)
+{
+    if (key == modifierRightShiftKey) {
+        modifierFlag ^= modifierRightShift;
+    } else if (key == modifierLeftShiftKey) {
+        modifierFlag ^= modifierLeftShift;
+    }
+}
+
+bool HackadayCommunicatorKeyboard::isModifierKey(uint8_t key)
+{
+    return (key == modifierRightShiftKey || key == modifierLeftShiftKey);
+}
+
+#endif

src/input/HackadayCommunicatorKeyboard.h

@@ -0,0 +1,26 @@
+#include "TCA8418KeyboardBase.h"
+
+class HackadayCommunicatorKeyboard : public TCA8418KeyboardBase
+{
+  public:
+    HackadayCommunicatorKeyboard();
+    void reset(void);
+    void trigger(void) override;
+    virtual ~HackadayCommunicatorKeyboard() {}
+
+  protected:
+    void pressed(uint8_t key) override;
+    void released(void) override;
+
+    void updateModifierFlag(uint8_t key);
+    bool isModifierKey(uint8_t key);
+
+  private:
+    uint8_t modifierFlag;        // Flag to indicate if a modifier key is pressed
+    uint32_t last_modifier_time; // Timestamp of the last modifier key press
+    int8_t last_key;
+    int8_t next_key;
+    uint32_t last_tap;
+    uint8_t char_idx;
+    int32_t tap_interval;
+};

src/input/InputBroker.cpp

@@ -52,7 +52,7 @@ int InputBroker::handleInputEvent(const InputEvent *event)
     powerFSM.trigger(EVENT_INPUT); // todo: not every input should wake, like long hold release
 
     if (event && event->inputEvent != INPUT_BROKER_NONE && externalNotificationModule &&
-        moduleConfig.external_notification.enabled) {
+        moduleConfig.external_notification.enabled && externalNotificationModule->nagging()) {
         externalNotificationModule->stopNow();
     }
 

src/input/InputBroker.h

@@ -3,6 +3,12 @@
 #include "Observer.h"
 #include "freertosinc.h"
 
+#ifdef InputBrokerDebug
+#define LOG_INPUT(...) LOG_DEBUG(__VA_ARGS__)
+#else
+#define LOG_INPUT(...)
+#endif
+
 enum input_broker_event {
     INPUT_BROKER_NONE = 0,
     INPUT_BROKER_SELECT = 10,

src/input/SerialKeyboard.cpp

@@ -2,6 +2,8 @@
 #include "configuration.h"
 #include <Throttle.h>
 
+SerialKeyboard *globalSerialKeyboard = nullptr;
+
 #ifdef INPUTBROKER_SERIAL_TYPE
 #define CANNED_MESSAGE_MODULE_ENABLE 1 // in case it's not set in the variant file
 
@@ -25,6 +27,8 @@ unsigned char KeyMap[3][4][10] = {{{'.', 'a', 'd', 'g', 'j', 'm', 'p', 't', 'w',
 SerialKeyboard::SerialKeyboard(const char *name) : concurrency::OSThread(name)
 {
     this->_originName = name;
+
+    globalSerialKeyboard = this;
 }
 
 void SerialKeyboard::erase()
@@ -85,9 +89,21 @@ int32_t SerialKeyboard::runOnce()
             e.source = this->_originName;
             // SELECT OR SEND OR CANCEL EVENT
             if (!(shiftRegister2 & (1 << 3))) {
-                e.inputEvent = INPUT_BROKER_UP;
+                if (shift > 0) {
+                    e.inputEvent = INPUT_BROKER_ANYKEY; // REQUIRED
+                    e.kbchar = 0x09;                    // TAB
+                    shift = 0;                          // reset shift after TAB
+                } else {
+                    e.inputEvent = INPUT_BROKER_LEFT;
+                }
             } else if (!(shiftRegister2 & (1 << 2))) {
-                e.inputEvent = INPUT_BROKER_RIGHT;
+                if (shift > 0) {
+                    e.inputEvent = INPUT_BROKER_ANYKEY; // REQUIRED
+                    e.kbchar = 0x09;                    // TAB
+                    shift = 0;                          // reset shift after TAB
+                } else {
+                    e.inputEvent = INPUT_BROKER_RIGHT;
+                }
                 e.kbchar = 0;
             } else if (!(shiftRegister2 & (1 << 1))) {
                 e.inputEvent = INPUT_BROKER_SELECT;

src/input/SerialKeyboard.h

@@ -8,6 +8,8 @@ class SerialKeyboard : public Observable<const InputEvent *>, public concurrency
   public:
     explicit SerialKeyboard(const char *name);
 
+    uint8_t getShift() const { return shift; }
+
   protected:
     virtual int32_t runOnce() override;
     void erase();
@@ -22,4 +24,6 @@ class SerialKeyboard : public Observable<const InputEvent *>, public concurrency
     int lastKeyPressed = 13;
     int quickPress = 0;
     unsigned long lastPressTime = 0;
-};
+};
+
+extern SerialKeyboard *globalSerialKeyboard;

src/input/kbI2cBase.cpp

@@ -7,6 +7,8 @@
 #include "TDeckProKeyboard.h"
 #elif defined(T_LORA_PAGER)
 #include "TLoraPagerKeyboard.h"
+#elif defined(HACKADAY_COMMUNICATOR)
+#include "HackadayCommunicatorKeyboard.h"
 #else
 #include "TCA8418Keyboard.h"
 #endif
@@ -20,6 +22,8 @@ KbI2cBase::KbI2cBase(const char *name)
       TCAKeyboard(*(new TDeckProKeyboard()))
 #elif defined(T_LORA_PAGER)
       TCAKeyboard(*(new TLoraPagerKeyboard()))
+#elif defined(HACKADAY_COMMUNICATOR)
+      TCAKeyboard(*(new HackadayCommunicatorKeyboard()))
 #else
       TCAKeyboard(*(new TCA8418Keyboard()))
 #endif
@@ -328,7 +332,7 @@ int32_t KbI2cBase::runOnce()
                 break;
             }
             if (e.inputEvent != INPUT_BROKER_NONE) {
-                LOG_DEBUG("TCA8418 Notifying: %i Char: %c", e.inputEvent, e.kbchar);
+                // LOG_DEBUG("TCA8418 Notifying: %i Char: %c", e.inputEvent, e.kbchar);
                 this->notifyObservers(&e);
             }
             TCAKeyboard.trigger();

src/main.cpp

@@ -394,7 +394,10 @@ void setup()
     io.pinMode(EXPANDS_GPIO_EN, OUTPUT);
     io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
     io.pinMode(EXPANDS_SD_PULLEN, INPUT);
+#elif defined(HACKADAY_COMMUNICATOR)
+    pinMode(KB_INT, INPUT);
 #endif
+
     concurrency::hasBeenSetup = true;
 #if ARCH_PORTDUINO
     SPISettings spiSettings(portduino_config.spiSpeed, MSBFIRST, SPI_MODE0);
@@ -477,6 +480,10 @@ void setup()
 #ifdef RESET_OLED
     pinMode(RESET_OLED, OUTPUT);
     digitalWrite(RESET_OLED, 1);
+    delay(2);
+    digitalWrite(RESET_OLED, 0);
+    delay(10);
+    digitalWrite(RESET_OLED, 1);
 #endif
 
 #ifdef SENSOR_POWER_CTRL_PIN
@@ -874,7 +881,7 @@ void setup()
 
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) ||       \
     defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) ||              \
-    defined(USE_SPISSD1306)
+    defined(USE_SPISSD1306) || defined(USE_ST7796) || defined(HACKADAY_COMMUNICATOR)
         screen = new graphics::Screen(screen_found, screen_model, screen_geometry);
 #elif defined(ARCH_PORTDUINO)
         if ((screen_found.port != ScanI2C::I2CPort::NO_I2C || portduino_config.displayPanel) &&
@@ -959,6 +966,7 @@ void setup()
     i2cScanner.reset();
 #endif
 
+#if !defined(MESHTASTIC_EXCLUDE_PKI)
     // warn the user about a low entropy key
     if (nodeDB->keyIsLowEntropy && !nodeDB->hasWarned) {
         LOG_WARN(LOW_ENTROPY_WARNING);
@@ -969,6 +977,7 @@ void setup()
         service->sendClientNotification(cn);
         nodeDB->hasWarned = true;
     }
+#endif
 
 // buttons are now inputBroker, so have to come after setupModules
 #if HAS_BUTTON
@@ -1149,7 +1158,7 @@ void setup()
 // the current region name)
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) ||       \
     defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) ||              \
-    defined(USE_SPISSD1306)
+    defined(USE_ST7796) || defined(USE_SPISSD1306) || defined(HACKADAY_COMMUNICATOR)
     if (screen)
         screen->setup();
 #elif defined(ARCH_PORTDUINO)

src/mesh/CryptoEngine.cpp

@@ -4,17 +4,22 @@
 
 #if !(MESHTASTIC_EXCLUDE_PKI)
 #include "NodeDB.h"
+#include "XEdDSA.h"
 #include "aes-ccm.h"
 #include "meshUtils.h"
 #include <Crypto.h>
 #include <Curve25519.h>
+#include <Ed25519.h>
 #include <RNG.h>
 #include <SHA256.h>
-#if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN)
-#if !defined(ARCH_STM32WL)
-#define CryptRNG RNG
+
+#ifndef NUM_LIMBS_256BIT
+#define NUM_LIMBS_BITS(n) (((n) + sizeof(limb_t) * 8 - 1) / (8 * sizeof(limb_t)))
+#define NUM_LIMBS_256BIT NUM_LIMBS_BITS(256)
 #endif
 
+#if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN)
+
 /**
  * Create a public/private key pair with Curve25519.
  *
@@ -35,6 +40,7 @@ void CryptoEngine::generateKeyPair(uint8_t *pubKey, uint8_t *privKey)
     Curve25519::dh1(public_key, private_key);
     memcpy(pubKey, public_key, sizeof(public_key));
     memcpy(privKey, private_key, sizeof(private_key));
+    XEdDSA::priv_curve_to_ed_keys(private_key, xeddsa_private_key, xeddsa_public_key);
 }
 
 /**
@@ -54,12 +60,99 @@ bool CryptoEngine::regeneratePublicKey(uint8_t *pubKey, uint8_t *privKey)
         }
         memcpy(private_key, privKey, sizeof(private_key));
         memcpy(public_key, pubKey, sizeof(public_key));
+        XEdDSA::priv_curve_to_ed_keys(private_key, xeddsa_private_key, xeddsa_public_key);
     } else {
         LOG_WARN("X25519 key generation failed due to blank private key");
         return false;
     }
     return true;
 }
+
+/**
+ * Build a signing buffer that covers packet metadata and payload:
+ *   [fromNode(4) | packetId(4) | portnum(4) | payload(N)]
+ * This prevents replay, reattribution, and portnum redirection attacks.
+ */
+static size_t buildSigningBuffer(uint8_t *buf, size_t bufSize, uint32_t fromNode, uint32_t packetId, uint32_t portnum,
+                                 const uint8_t *payload, size_t payloadLen)
+{
+    const size_t headerLen = sizeof(uint32_t) * 3;
+    size_t totalLen = headerLen + payloadLen;
+    if (totalLen > bufSize)
+        return 0;
+    memcpy(buf, &fromNode, sizeof(uint32_t));
+    memcpy(buf + sizeof(uint32_t), &packetId, sizeof(uint32_t));
+    memcpy(buf + sizeof(uint32_t) * 2, &portnum, sizeof(uint32_t));
+    memcpy(buf + headerLen, payload, payloadLen);
+    return totalLen;
+}
+
+bool CryptoEngine::xeddsa_sign(uint32_t fromNode, uint32_t packetId, uint32_t portnum, const uint8_t *payload, size_t payloadLen,
+                               uint8_t *signature)
+{
+    if (memfll(xeddsa_private_key, 0, sizeof(xeddsa_private_key)))
+        return false;
+    uint8_t sigBuf[MAX_BLOCKSIZE];
+    size_t sigLen = buildSigningBuffer(sigBuf, sizeof(sigBuf), fromNode, packetId, portnum, payload, payloadLen);
+    if (sigLen == 0)
+        return false;
+    XEdDSA::sign(signature, xeddsa_private_key, xeddsa_public_key, sigBuf, sigLen);
+    return true;
+}
+
+bool CryptoEngine::xeddsa_verify(const uint8_t *pubKey, uint32_t fromNode, uint32_t packetId, uint32_t portnum,
+                                 const uint8_t *payload, size_t payloadLen, const uint8_t *signature)
+{
+    // Use cached Ed25519 key if the Curve25519 key matches, avoiding expensive field inversion
+    if (memcmp(pubKey, cached_curve_pubkey, 32) != 0) {
+        curve_to_ed_pub(pubKey, cached_ed_pubkey);
+        memcpy(cached_curve_pubkey, pubKey, 32);
+    }
+    uint8_t sigBuf[MAX_BLOCKSIZE];
+    size_t sigLen = buildSigningBuffer(sigBuf, sizeof(sigBuf), fromNode, packetId, portnum, payload, payloadLen);
+    if (sigLen == 0)
+        return false;
+    return XEdDSA::verify(signature, cached_ed_pubkey, sigBuf, sigLen);
+}
+
+void CryptoEngine::curve_to_ed_pub(const uint8_t *curve_pubkey, uint8_t *ed_pubkey)
+{
+
+    // Apply the birational map defined in RFC 7748, section 4.1 "Curve25519" to calculate an Ed25519 public
+    // key from a Curve25519 public key. Because the serialization format of Curve25519 public keys only
+    // contains the u coordinate, the x coordinate of the corresponding Ed25519 public key can't be uniquely
+    // calculated as defined by the birational map. The x coordinate is represented in the serialization
+    // format of Ed25519 public keys only in a single sign bit. This function assumes that the sign bit is
+    // known to the user and is passed accordingly.
+    fe u, y;
+    fe one;
+    fe u_minus_one, u_plus_one, u_plus_one_inv;
+
+    // Parse the Curve25519 public key input as a field element containing the u coordinate. RFC 7748,
+    // section 5 "The X25519 and X448 Functions", mandates that the most significant bit of the Curve25519
+    // public key has to be zeroized. This is handled by fe_frombytes internally.
+    fe_frombytes(u, curve_pubkey);
+
+    // Calculate the parameters (u - 1) and (u + 1)
+    fe_1(one);
+    fe_sub(u_minus_one, u, one);
+    fe_add(u_plus_one, u, one);
+
+    // Invert u + 1
+    fe_invert(u_plus_one_inv, u_plus_one);
+
+    // Calculate y = (u - 1) * inv(u + 1) (mod p)
+    fe_mul(y, u_minus_one, u_plus_one_inv);
+
+    // Serialize the field element containing the y coordinate to the Ed25519 public key output
+    fe_tobytes(ed_pubkey, y);
+
+    // Set the sign bit to zero
+    ed_pubkey[31] &= 0x7f;
+
+    // need to convert the pubkey y = ( u - 1) * inv( u + 1) (mod p).
+}
+
 #endif
 void CryptoEngine::clearKeys()
 {

src/mesh/CryptoEngine.h

@@ -22,6 +22,7 @@ struct CryptoKey {
 
 #define MAX_BLOCKSIZE 256
 #define TEST_CURVE25519_FIELD_OPS // Exposes Curve25519::isWeakPoint() for testing keys
+#define XEDDSA_SIGNATURE_SIZE 64
 
 class CryptoEngine
 {
@@ -35,6 +36,10 @@ class CryptoEngine
 #if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN)
     virtual void generateKeyPair(uint8_t *pubKey, uint8_t *privKey);
     virtual bool regeneratePublicKey(uint8_t *pubKey, uint8_t *privKey);
+    bool xeddsa_sign(uint32_t fromNode, uint32_t packetId, uint32_t portnum, const uint8_t *payload, size_t payloadLen,
+                     uint8_t *signature);
+    bool xeddsa_verify(const uint8_t *pubKey, uint32_t fromNode, uint32_t packetId, uint32_t portnum, const uint8_t *payload,
+                       size_t payloadLen, const uint8_t *signature);
 
 #endif
     void clearKeys();
@@ -82,6 +87,12 @@ class CryptoEngine
 #if !(MESHTASTIC_EXCLUDE_PKI)
     uint8_t shared_key[32] = {0};
     uint8_t private_key[32] = {0};
+    uint8_t xeddsa_public_key[32] = {0};
+    uint8_t xeddsa_private_key[32] = {0};
+    void curve_to_ed_pub(const uint8_t *curve_pubkey, uint8_t *ed_pubkey);
+    // Single-entry cache for curve_to_ed_pub conversion (avoids expensive field inversion per packet)
+    uint8_t cached_curve_pubkey[32] = {0};
+    uint8_t cached_ed_pubkey[32] = {0};
 #endif
     /**
      * Init our 128 bit nonce for a new packet

src/mesh/LR11x0Interface.cpp

@@ -244,6 +244,8 @@ template <typename T> void LR11x0Interface<T>::startReceive()
     // We use a 16 bit preamble so this should save some power by letting radio sit in standby mostly.
     int err =
         lora.startReceive(RADIOLIB_LR11X0_RX_TIMEOUT_INF, MESHTASTIC_RADIOLIB_IRQ_RX_FLAGS, RADIOLIB_IRQ_RX_DEFAULT_MASK, 0);
+    if (err)
+        LOG_ERROR("StartReceive error: %d", err);
     assert(err == RADIOLIB_ERR_NONE);
 
     RadioLibInterface::startReceive();
@@ -304,4 +306,4 @@ template <typename T> bool LR11x0Interface<T>::sleep()
 
     return true;
 }
-#endif
+#endif

src/mesh/MeshRadio.h

@@ -22,11 +22,4 @@ struct RegionInfo {
 extern const RegionInfo regions[];
 extern const RegionInfo *myRegion;
 
-extern void initRegion();
-
-/**
- * Get the effective duty cycle for the current region based on device role.
- * For EU_866, returns 10% for fixed devices (ROUTER, ROUTER_LATE) and 2.5% for mobile devices.
- * For other regions, returns the standard duty cycle.
- */
-extern float getEffectiveDutyCycle();
+extern void initRegion();

src/mesh/NodeDB.cpp

@@ -246,8 +246,6 @@ NodeDB::NodeDB()
 
     // likewise - we always want the app requirements to come from the running appload
     myNodeInfo.min_app_version = 30200; // format is Mmmss (where M is 1+the numeric major number. i.e. 30200 means 2.2.00
-    // Note! We do this after loading saved settings, so that if somehow an invalid nodenum was stored in preferences we won't
-    // keep using that nodenum forever. Crummy guess at our nodenum (but we will check against the nodedb to avoid conflicts)
     pickNewNodeNum();
 
     // Set our board type so we can share it with others
@@ -267,31 +265,18 @@ NodeDB::NodeDB()
     }
 
 #if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN || MESHTASTIC_EXCLUDE_PKI)
-
-    if (!owner.is_licensed && config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
-        bool keygenSuccess = false;
-        keyIsLowEntropy = checkLowEntropyPublicKey(config.security.public_key);
-        if (config.security.private_key.size == 32 && !keyIsLowEntropy) {
-            if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
-                keygenSuccess = true;
-            }
-        } else {
-            crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes);
-            keygenSuccess = true;
-        }
-        if (keygenSuccess) {
-            config.security.public_key.size = 32;
-            config.security.private_key.size = 32;
-            owner.public_key.size = 32;
-            memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
-        }
-    }
+    // Generate crypto keys if needed using consolidated function
+    // Set my node num uint32 value to bytes from the public key (if we have one)
+    // Generate identity and crypto keys if needed; this will create a new identity if one does not exist
+    generateCryptoKeyPair(nullptr);
 #elif !(MESHTASTIC_EXCLUDE_PKI)
     // Calculate Curve25519 public and private keys
     if (config.security.private_key.size == 32 && config.security.public_key.size == 32) {
         owner.public_key.size = config.security.public_key.size;
         memcpy(owner.public_key.bytes, config.security.public_key.bytes, config.security.public_key.size);
         crypto->setDHPrivateKey(config.security.private_key.bytes);
+        // Set my node num uint32 value to bytes from the new public key
+        myNodeInfo.my_node_num = crc32Buffer(config.security.public_key.bytes, config.security.public_key.size);
     }
 #endif
     // Include our owner in the node db under our nodenum
@@ -653,7 +638,7 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     strncpy(config.network.ntp_server, "meshtastic.pool.ntp.org", 32);
 
 #if (defined(T_DECK) || defined(T_WATCH_S3) || defined(UNPHONE) || defined(PICOMPUTER_S3) || defined(SENSECAP_INDICATOR) ||      \
-     defined(ELECROW_PANEL)||defined(HELTEC_V4_TFT)) &&                                                                                                  \
+     defined(ELECROW_PANEL) || defined(HELTEC_V4_TFT)) &&                                                                        \
     HAS_TFT
     // switch BT off by default; use TFT programming mode or hotkey to enable
     config.bluetooth.enabled = false;
@@ -664,7 +649,8 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     config.bluetooth.fixed_pin = defaultBLEPin;
 
 #if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) ||       \
-    defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(USE_SPISSD1306)
+    defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(USE_SPISSD1306) ||         \
+    defined(USE_ST7796) || defined(HACKADAY_COMMUNICATOR)
     bool hasScreen = true;
 #ifdef HELTEC_MESH_NODE_T114
     uint32_t st7789_id = get_st7789_id(ST7789_NSS, ST7789_SCK, ST7789_SDA, ST7789_RS, ST7789_RESET);
@@ -734,6 +720,9 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     config.display.screen_on_secs = 30;
     config.display.wake_on_tap_or_motion = true;
 #endif
+#ifdef COMPASS_ORIENTATION
+    config.display.compass_orientation = COMPASS_ORIENTATION;
+#endif
 #if defined(ARCH_ESP32) && !MESHTASTIC_EXCLUDE_WIFI
     if (WiFiOTA::isUpdated()) {
         WiFiOTA::recoverConfig(&config.network);
@@ -2008,6 +1997,7 @@ UserLicenseStatus NodeDB::getLicenseStatus(uint32_t nodeNum)
     return info->user.is_licensed ? UserLicenseStatus::Licensed : UserLicenseStatus::NotLicensed;
 }
 
+#if !defined(MESHTASTIC_EXCLUDE_PKI)
 bool NodeDB::checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_public_key_t &keyToTest)
 {
     if (keyToTest.size == 32) {
@@ -2022,6 +2012,99 @@ bool NodeDB::checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_pub
     }
     return false;
 }
+#endif
+
+bool NodeDB::generateCryptoKeyPair(const uint8_t *privateKey)
+{
+#if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN || MESHTASTIC_EXCLUDE_PKI)
+    // Only generate keys for non-licensed users and if LoRa region is set
+    if (owner.is_licensed || config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
+        return false;
+    }
+
+    bool keygenSuccess = false;
+    bool lowEntropy = checkLowEntropyPublicKey(config.security.public_key);
+
+    // If a specific private key was provided, use it
+    if (privateKey != nullptr) {
+        LOG_INFO("Using provided private key for PKI");
+        memcpy(config.security.private_key.bytes, privateKey, 32);
+        config.security.private_key.size = 32;
+        config.security.public_key.size = 32;
+
+        // Generate public key from the provided private key
+        if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
+            keygenSuccess = true;
+        } else {
+            LOG_ERROR("Failed to generate public key from provided private key");
+            return false;
+        }
+    }
+    // Try to regenerate public key from existing private key if it's valid and not low entropy
+    else if (config.security.private_key.size == 32 && !lowEntropy) {
+        config.security.public_key.size = 32;
+        LOG_DEBUG("Regenerate PKI public key from existing private key");
+        if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
+            keygenSuccess = true;
+        }
+    } else {
+        // Generate a new key pair
+        LOG_INFO("Generate new PKI keys");
+        config.security.public_key.size = 32;
+        config.security.private_key.size = 32;
+        crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes);
+        keygenSuccess = true;
+    }
+
+    // Update sizes and copy to owner if successful
+    if (keygenSuccess) {
+        owner.public_key.size = 32;
+        memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
+
+        // Update global entropy flag for UI display
+        keyIsLowEntropy = false;
+
+        // Set the DH private key for crypto operations
+        LOG_DEBUG("Set DH private key for crypto operations");
+        crypto->setDHPrivateKey(config.security.private_key.bytes);
+
+        // Conditionally create new identity based on parameter
+        createNewIdentity();
+    }
+    return keygenSuccess;
+#else
+    return false;
+#endif
+}
+
+bool NodeDB::createNewIdentity()
+{
+    uint32_t oldNodeNum = getNodeNum();
+    uint32_t newNodeNum = crc32Buffer(config.security.public_key.bytes, config.security.public_key.size);
+
+    // If the key hasn't changed, nothing to do
+    if (newNodeNum == oldNodeNum)
+        return false;
+
+    // Retire the old node entry
+    meshtastic_NodeInfoLite *node = getMeshNode(oldNodeNum);
+    if (node != NULL) {
+        LOG_DEBUG("Old node num %u is now %u", oldNodeNum, newNodeNum);
+        node->is_ignored = true;
+        node->has_device_metrics = false;
+        node->has_position = false;
+        node->user.public_key.size = 0;
+        memset(node->user.public_key.bytes, 0, sizeof(node->user.public_key.bytes));
+    }
+
+    myNodeInfo.my_node_num = newNodeNum;
+
+    meshtastic_NodeInfoLite *info = getOrCreateMeshNode(getNodeNum());
+    info->user = TypeConversions::ConvertToUserLite(owner);
+    info->has_user = true;
+
+    return true;
+}
 
 bool NodeDB::backupPreferences(meshtastic_AdminMessage_BackupLocation location)
 {

src/mesh/NodeDB.h

@@ -283,7 +283,15 @@ class NodeDB
 
     bool hasValidPosition(const meshtastic_NodeInfoLite *n);
 
+#if !defined(MESHTASTIC_EXCLUDE_PKI)
     bool checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_public_key_t &keyToTest);
+#endif
+
+    /// Consolidate crypto key generation logic used across multiple modules
+    /// @param privateKey Optional 32-byte private key to use. If nullptr, generates new random keys.
+    bool generateCryptoKeyPair(const uint8_t *privateKey = nullptr);
+
+    bool createNewIdentity();
 
     bool backupPreferences(meshtastic_AdminMessage_BackupLocation location);
     bool restorePreferences(meshtastic_AdminMessage_BackupLocation location,
@@ -368,9 +376,12 @@ extern uint32_t error_address;
 #define NODEINFO_BITFIELD_IS_KEY_MANUALLY_VERIFIED_SHIFT 0
 #define NODEINFO_BITFIELD_IS_KEY_MANUALLY_VERIFIED_MASK (1 << NODEINFO_BITFIELD_IS_KEY_MANUALLY_VERIFIED_SHIFT)
 
+#define NODEINFO_BITFIELD_HAS_XEDDSA_SIGNED_SHIFT 1
+#define NODEINFO_BITFIELD_HAS_XEDDSA_SIGNED_MASK (1 << NODEINFO_BITFIELD_HAS_XEDDSA_SIGNED_SHIFT)
+
 #define Module_Config_size                                                                                                       \
     (ModuleConfig_CannedMessageConfig_size + ModuleConfig_ExternalNotificationConfig_size + ModuleConfig_MQTTConfig_size +       \
      ModuleConfig_RangeTestConfig_size + ModuleConfig_SerialConfig_size + ModuleConfig_StoreForwardConfig_size +                 \
      ModuleConfig_TelemetryConfig_size + ModuleConfig_size)
 
-// Please do not remove this comment, it makes trunk and compiler happy at the same time.
+// Please do not remove this comment, it makes trunk and compiler happy at the same time.

src/mesh/RadioInterface.cpp

@@ -187,13 +187,6 @@ const RegionInfo regions[] = {
     */
     RDEF(BR_902, 902.0f, 907.5f, 100, 0, 30, true, false, false),
 
-    /*
-        EU 866MHz RFID band (ETSI EN 302 208): 4 channels at 865.7/866.3/866.9/867.5 MHz
-        475 kHz gap between channels, 27 dBm, duty cycle 2.5% (mobile) or 10% (fixed)
-        https://www.etsi.org/deliver/etsi_en/302200_302299/302208/03.04.01_60/en_302208v030401p.pdf
-    */
-    RDEF(EU_866, 865.6375f, 867.5625f, 2.5, 0.475, 27, true, false, false),
-
     /*
        2.4 GHZ WLAN Band equivalent. Only for SX128x chips.
     */
@@ -226,23 +219,6 @@ void initRegion()
     myRegion = r;
 }
 
-/**
- * Get duty cycle for current region. EU_866: 10% for routers, 2.5% for mobile.
- */
-float getEffectiveDutyCycle()
-{
-    if (myRegion->code == meshtastic_Config_LoRaConfig_RegionCode_EU_866) {
-        if (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ||
-            config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER_LATE) {
-            return 10.0f;
-        } else {
-            return 2.5f;
-        }
-    }
-    // For all other regions, return the standard duty cycle
-    return myRegion->dutyCycle;
-}
-
 /**
  * ## LoRaWAN for North America
 
@@ -542,11 +518,6 @@ void RadioInterface::applyModemConfig()
                 cr = 8;
                 sf = 12;
                 break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_LITE_FAST:
-                bw = 125;
-                cr = 5;
-                sf = 9;
-                break;
             }
         } else {
             sf = loraConfig.spread_factor;
@@ -580,19 +551,6 @@ void RadioInterface::applyModemConfig()
             // Set to default modem preset
             loraConfig.use_preset = true;
             loraConfig.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
-        } else if (myRegion->code == meshtastic_Config_LoRaConfig_RegionCode_EU_866 && bw != 125) {
-            static const char *err_string = "EU_866 requires 125kHz bandwidth. Fall back to LiteFast preset";
-            LOG_ERROR(err_string);
-            RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
-
-            meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
-            cn->level = meshtastic_LogRecord_Level_ERROR;
-            sprintf(cn->message, err_string);
-            service->sendClientNotification(cn);
-
-            // Set to LiteFast preset which is compliant
-            loraConfig.use_preset = true;
-            loraConfig.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LITE_FAST;
         } else {
             validConfig = true;
         }
@@ -611,9 +569,8 @@ void RadioInterface::applyModemConfig()
     // Set final tx_power back onto config
     loraConfig.tx_power = (int8_t)power; // cppcheck-suppress assignmentAddressToInteger
 
-    // Calculate number of channels: spacing = gap between channels (0 for continuous spectrum)
-    float channelSpacing = myRegion->spacing + (bw / 1000);
-    uint32_t numChannels = round((myRegion->freqEnd - myRegion->freqStart + myRegion->spacing) / channelSpacing);
+    // Calculate the number of channels
+    uint32_t numChannels = floor((myRegion->freqEnd - myRegion->freqStart) / (myRegion->spacing + (bw / 1000)));
 
     // If user has manually specified a channel num, then use that, otherwise generate one by hashing the name
     const char *channelName = channels.getName(channels.getPrimaryIndex());
@@ -625,8 +582,11 @@ void RadioInterface::applyModemConfig()
         channel_num ==
         hash(DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset)) % numChannels;
 
-    // Calculate frequency: freqStart is band edge, add half bandwidth to get first channel center
-    float freq = myRegion->freqStart + (bw / 2000) + (channel_num * channelSpacing);
+    // Old frequency selection formula
+    // float freq = myRegion->freqStart + ((((myRegion->freqEnd - myRegion->freqStart) / numChannels) / 2) * channel_num);
+
+    // New frequency selection formula
+    float freq = myRegion->freqStart + (bw / 2000) + (channel_num * (bw / 1000));
 
     // override if we have a verbatim frequency
     if (loraConfig.override_frequency) {

src/mesh/Router.cpp

@@ -294,11 +294,10 @@ ErrorCode Router::send(meshtastic_MeshPacket *p)
     } // should have already been handled by sendLocal
 
     // Abort sending if we are violating the duty cycle
-    float effectiveDutyCycle = getEffectiveDutyCycle();
-    if (!config.lora.override_duty_cycle && effectiveDutyCycle < 100) {
+    if (!config.lora.override_duty_cycle && myRegion->dutyCycle < 100) {
         float hourlyTxPercent = airTime->utilizationTXPercent();
-        if (hourlyTxPercent > effectiveDutyCycle) {
-            uint8_t silentMinutes = airTime->getSilentMinutes(hourlyTxPercent, effectiveDutyCycle);
+        if (hourlyTxPercent > myRegion->dutyCycle) {
+            uint8_t silentMinutes = airTime->getSilentMinutes(hourlyTxPercent, myRegion->dutyCycle);
 
             LOG_WARN("Duty cycle limit exceeded. Aborting send for now, you can send again in %d mins", silentMinutes);
 
@@ -501,6 +500,32 @@ DecodeState perhapsDecode(meshtastic_MeshPacket *p)
         if (p->decoded.has_bitfield)
             p->decoded.want_response |= p->decoded.bitfield & BITFIELD_WANT_RESPONSE_MASK;
 
+        if (p->decoded.has_xeddsa_signature) {
+            meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(p->from);
+            if (node && node->user.public_key.size == 32) {
+                p->xeddsa_signed =
+                    crypto->xeddsa_verify(node->user.public_key.bytes, p->from, p->id, p->decoded.portnum,
+                                          p->decoded.payload.bytes, p->decoded.payload.size, p->decoded.xeddsa_signature.bytes);
+                if (p->xeddsa_signed) {
+                    // Mark this node as a signer so future unsigned packets from it are rejected
+                    node->bitfield |= NODEINFO_BITFIELD_HAS_XEDDSA_SIGNED_MASK;
+                    LOG_DEBUG("Verified XEdDSA signature from 0x%08x", p->from);
+                } else {
+                    LOG_WARN("XEdDSA signature verification failed from 0x%08x, dropping", p->from);
+                    return DecodeState::DECODE_FAILURE;
+                }
+            } else {
+                LOG_DEBUG("No public key for 0x%08x, cannot verify XEdDSA signature", p->from);
+            }
+        } else {
+            // Unsigned packet — reject if this node previously sent signed packets
+            meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(p->from);
+            if (node && (node->bitfield & NODEINFO_BITFIELD_HAS_XEDDSA_SIGNED_MASK)) {
+                LOG_WARN("Dropping unsigned packet from 0x%08x that previously signed", p->from);
+                return DecodeState::DECODE_FAILURE;
+            }
+        }
+
         /* Not actually ever used.
         // Decompress if needed. jm
         if (p->decoded.portnum == meshtastic_PortNum_TEXT_MESSAGE_COMPRESSED_APP) {
@@ -550,6 +575,17 @@ meshtastic_Routing_Error perhapsEncode(meshtastic_MeshPacket *p)
             p->decoded.has_bitfield = true;
             p->decoded.bitfield |= (config.lora.config_ok_to_mqtt << BITFIELD_OK_TO_MQTT_SHIFT);
             p->decoded.bitfield |= (p->decoded.want_response << BITFIELD_WANT_RESPONSE_SHIFT);
+            // Sign broadcast packets if payload + signature fits within the max Data payload.
+            // The actual encoded size is checked after pb_encode (TOO_LARGE).
+            if (!p->pki_encrypted && isBroadcast(p->to) &&
+                p->decoded.payload.size + XEDDSA_SIGNATURE_SIZE < meshtastic_Constants_DATA_PAYLOAD_LEN) {
+                if (crypto->xeddsa_sign(p->from, p->id, p->decoded.portnum, p->decoded.payload.bytes, p->decoded.payload.size,
+                                        p->decoded.xeddsa_signature.bytes)) {
+                    p->decoded.xeddsa_signature.size = XEDDSA_SIGNATURE_SIZE;
+                    p->decoded.has_xeddsa_signature = true;
+                    LOG_DEBUG("XEdDSA signed packet 0x%08x", p->id);
+                }
+            }
         }
 
         size_t numbytes = pb_encode_to_bytes(bytes, sizeof(bytes), &meshtastic_Data_msg, &p->decoded);

src/mesh/TypeConversions.cpp

@@ -14,6 +14,7 @@ meshtastic_NodeInfo TypeConversions::ConvertToNodeInfo(const meshtastic_NodeInfo
     info.is_favorite = lite->is_favorite;
     info.is_ignored = lite->is_ignored;
     info.is_key_manually_verified = lite->bitfield & NODEINFO_BITFIELD_IS_KEY_MANUALLY_VERIFIED_MASK;
+    info.has_xeddsa_signed = lite->bitfield & NODEINFO_BITFIELD_HAS_XEDDSA_SIGNED_MASK;
 
     if (lite->has_hops_away) {
         info.has_hops_away = true;

src/mesh/generated/meshtastic/deviceonly.pb.h

@@ -362,7 +362,7 @@ extern const pb_msgdesc_t meshtastic_BackupPreferences_msg;
 #define MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_MAX_SIZE meshtastic_BackupPreferences_size
 #define meshtastic_BackupPreferences_size        2277
 #define meshtastic_ChannelFile_size              718
-#define meshtastic_DeviceState_size              1737
+#define meshtastic_DeviceState_size              1944
 #define meshtastic_NodeInfoLite_size             196
 #define meshtastic_PositionLite_size             28
 #define meshtastic_UserLite_size                 98

src/mesh/generated/meshtastic/mesh.pb.h

@@ -288,6 +288,12 @@ typedef enum _meshtastic_HardwareModel {
     meshtastic_HardwareModel_WISMESH_TAP_V2 = 116,
     /* RAK3401 */
     meshtastic_HardwareModel_RAK3401 = 117,
+    /* RAK6421 Hat+ */
+    meshtastic_HardwareModel_RAK6421 = 118,
+    /* Elecrow ThinkNode M4 */
+    meshtastic_HardwareModel_THINKNODE_M4 = 119,
+    /* Elecrow ThinkNode M6 */
+    meshtastic_HardwareModel_THINKNODE_M6 = 120,
     /* ------------------------------------------------------------------------------------------------------------------------------------------
  Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
  ------------------------------------------------------------------------------------------------------------------------------------------ */
@@ -728,6 +734,7 @@ typedef struct _meshtastic_Routing {
 } meshtastic_Routing;
 
 typedef PB_BYTES_ARRAY_T(233) meshtastic_Data_payload_t;
+typedef PB_BYTES_ARRAY_T(64) meshtastic_Data_xeddsa_signature_t;
 /* (Formerly called SubPacket)
  The payload portion fo a packet, this is the actual bytes that are sent
  inside a radio packet (because from/to are broken out by the comms library) */
@@ -761,6 +768,9 @@ typedef struct _meshtastic_Data {
     /* Bitfield for extra flags. First use is to indicate that user approves the packet being uploaded to MQTT. */
     bool has_bitfield;
     uint8_t bitfield;
+    /* XEdDSA signature for the payload */
+    bool has_xeddsa_signature;
+    meshtastic_Data_xeddsa_signature_t xeddsa_signature;
 } meshtastic_Data;
 
 typedef PB_BYTES_ARRAY_T(32) meshtastic_KeyVerification_hash1_t;
@@ -825,7 +835,11 @@ typedef struct _meshtastic_MeshPacket {
  Note: Our crypto implementation uses this field as well.
  See [crypto](/docs/overview/encryption) for details. */
     uint32_t from;
-    /* The (immediate) destination for this packet */
+    /* The (immediate) destination for this packet
+ If the value is 4,294,967,295 (maximum value of an unsigned 32bit integer), this indicates that the packet was
+ not destined for a specific node, but for a channel as indicated by the value of `channel` below.
+ If the value is another, this indicates that the packet was destined for a specific
+ node (i.e. a kind of "Direct Message" to this node) and not broadcast on a channel. */
     uint32_t to;
     /* (Usually) If set, this indicates the index in the secondary_channels table that this packet was sent/received on.
  If unset, packet was on the primary channel.
@@ -903,6 +917,8 @@ typedef struct _meshtastic_MeshPacket {
     uint32_t tx_after;
     /* Indicates which transport mechanism this packet arrived over */
     meshtastic_MeshPacket_TransportMechanism transport_mechanism;
+    /* Indicates whether the packet has a valid signature */
+    bool xeddsa_signed;
 } meshtastic_MeshPacket;
 
 /* The bluetooth to device link:
@@ -956,6 +972,10 @@ typedef struct _meshtastic_NodeInfo {
  Persists between NodeDB internal clean ups
  LSB 0 of the bitfield */
     bool is_key_manually_verified;
+    /* True if node is signing its packets via XEdDSA
+ Persists between NodeDB internal clean ups
+ LSB 1 of the bitfield */
+    bool has_xeddsa_signed;
 } meshtastic_NodeInfo;
 
 typedef PB_BYTES_ARRAY_T(16) meshtastic_MyNodeInfo_device_id_t;
@@ -1368,12 +1388,12 @@ extern "C" {
 #define meshtastic_User_init_default             {"", "", "", {0}, _meshtastic_HardwareModel_MIN, 0, _meshtastic_Config_DeviceConfig_Role_MIN, {0, {0}}, false, 0}
 #define meshtastic_RouteDiscovery_init_default   {0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, {0, 0, 0, 0, 0, 0, 0, 0}}
 #define meshtastic_Routing_init_default          {0, {meshtastic_RouteDiscovery_init_default}}
-#define meshtastic_Data_init_default             {_meshtastic_PortNum_MIN, {0, {0}}, 0, 0, 0, 0, 0, 0, false, 0}
+#define meshtastic_Data_init_default             {_meshtastic_PortNum_MIN, {0, {0}}, 0, 0, 0, 0, 0, 0, false, 0, false, {0, {0}}}
 #define meshtastic_KeyVerification_init_default  {0, {0, {0}}, {0, {0}}}
 #define meshtastic_Waypoint_init_default         {0, false, 0, false, 0, 0, 0, "", "", 0}
 #define meshtastic_MqttClientProxyMessage_init_default {"", 0, {{0, {0}}}, 0}
-#define meshtastic_MeshPacket_init_default       {0, 0, 0, 0, {meshtastic_Data_init_default}, 0, 0, 0, 0, 0, _meshtastic_MeshPacket_Priority_MIN, 0, _meshtastic_MeshPacket_Delayed_MIN, 0, 0, {0, {0}}, 0, 0, 0, 0, _meshtastic_MeshPacket_TransportMechanism_MIN}
-#define meshtastic_NodeInfo_init_default         {0, false, meshtastic_User_init_default, false, meshtastic_Position_init_default, 0, 0, false, meshtastic_DeviceMetrics_init_default, 0, 0, false, 0, 0, 0, 0}
+#define meshtastic_MeshPacket_init_default       {0, 0, 0, 0, {meshtastic_Data_init_default}, 0, 0, 0, 0, 0, _meshtastic_MeshPacket_Priority_MIN, 0, _meshtastic_MeshPacket_Delayed_MIN, 0, 0, {0, {0}}, 0, 0, 0, 0, _meshtastic_MeshPacket_TransportMechanism_MIN, 0}
+#define meshtastic_NodeInfo_init_default         {0, false, meshtastic_User_init_default, false, meshtastic_Position_init_default, 0, 0, false, meshtastic_DeviceMetrics_init_default, 0, 0, false, 0, 0, 0, 0, 0}
 #define meshtastic_MyNodeInfo_init_default       {0, 0, 0, {0, {0}}, "", _meshtastic_FirmwareEdition_MIN, 0}
 #define meshtastic_LogRecord_init_default        {"", 0, "", _meshtastic_LogRecord_Level_MIN}
 #define meshtastic_QueueStatus_init_default      {0, 0, 0, 0}
@@ -1399,12 +1419,12 @@ extern "C" {
 #define meshtastic_User_init_zero                {"", "", "", {0}, _meshtastic_HardwareModel_MIN, 0, _meshtastic_Config_DeviceConfig_Role_MIN, {0, {0}}, false, 0}
 #define meshtastic_RouteDiscovery_init_zero      {0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, {0, 0, 0, 0, 0, 0, 0, 0}}
 #define meshtastic_Routing_init_zero             {0, {meshtastic_RouteDiscovery_init_zero}}
-#define meshtastic_Data_init_zero                {_meshtastic_PortNum_MIN, {0, {0}}, 0, 0, 0, 0, 0, 0, false, 0}
+#define meshtastic_Data_init_zero                {_meshtastic_PortNum_MIN, {0, {0}}, 0, 0, 0, 0, 0, 0, false, 0, false, {0, {0}}}
 #define meshtastic_KeyVerification_init_zero     {0, {0, {0}}, {0, {0}}}
 #define meshtastic_Waypoint_init_zero            {0, false, 0, false, 0, 0, 0, "", "", 0}
 #define meshtastic_MqttClientProxyMessage_init_zero {"", 0, {{0, {0}}}, 0}
-#define meshtastic_MeshPacket_init_zero          {0, 0, 0, 0, {meshtastic_Data_init_zero}, 0, 0, 0, 0, 0, _meshtastic_MeshPacket_Priority_MIN, 0, _meshtastic_MeshPacket_Delayed_MIN, 0, 0, {0, {0}}, 0, 0, 0, 0, _meshtastic_MeshPacket_TransportMechanism_MIN}
-#define meshtastic_NodeInfo_init_zero            {0, false, meshtastic_User_init_zero, false, meshtastic_Position_init_zero, 0, 0, false, meshtastic_DeviceMetrics_init_zero, 0, 0, false, 0, 0, 0, 0}
+#define meshtastic_MeshPacket_init_zero          {0, 0, 0, 0, {meshtastic_Data_init_zero}, 0, 0, 0, 0, 0, _meshtastic_MeshPacket_Priority_MIN, 0, _meshtastic_MeshPacket_Delayed_MIN, 0, 0, {0, {0}}, 0, 0, 0, 0, _meshtastic_MeshPacket_TransportMechanism_MIN, 0}
+#define meshtastic_NodeInfo_init_zero            {0, false, meshtastic_User_init_zero, false, meshtastic_Position_init_zero, 0, 0, false, meshtastic_DeviceMetrics_init_zero, 0, 0, false, 0, 0, 0, 0, 0}
 #define meshtastic_MyNodeInfo_init_zero          {0, 0, 0, {0, {0}}, "", _meshtastic_FirmwareEdition_MIN, 0}
 #define meshtastic_LogRecord_init_zero           {"", 0, "", _meshtastic_LogRecord_Level_MIN}
 #define meshtastic_QueueStatus_init_zero         {0, 0, 0, 0}
@@ -1476,6 +1496,7 @@ extern "C" {
 #define meshtastic_Data_reply_id_tag             7
 #define meshtastic_Data_emoji_tag                8
 #define meshtastic_Data_bitfield_tag             9
+#define meshtastic_Data_xeddsa_signature_tag     10
 #define meshtastic_KeyVerification_nonce_tag     1
 #define meshtastic_KeyVerification_hash1_tag     2
 #define meshtastic_KeyVerification_hash2_tag     3
@@ -1512,6 +1533,7 @@ extern "C" {
 #define meshtastic_MeshPacket_relay_node_tag     19
 #define meshtastic_MeshPacket_tx_after_tag       20
 #define meshtastic_MeshPacket_transport_mechanism_tag 21
+#define meshtastic_MeshPacket_xeddsa_signed_tag  22
 #define meshtastic_NodeInfo_num_tag              1
 #define meshtastic_NodeInfo_user_tag             2
 #define meshtastic_NodeInfo_position_tag         3
@@ -1524,6 +1546,7 @@ extern "C" {
 #define meshtastic_NodeInfo_is_favorite_tag      10
 #define meshtastic_NodeInfo_is_ignored_tag       11
 #define meshtastic_NodeInfo_is_key_manually_verified_tag 12
+#define meshtastic_NodeInfo_has_xeddsa_signed_tag 13
 #define meshtastic_MyNodeInfo_my_node_num_tag    1
 #define meshtastic_MyNodeInfo_reboot_count_tag   8
 #define meshtastic_MyNodeInfo_min_app_version_tag 11
@@ -1684,7 +1707,8 @@ X(a, STATIC,   SINGULAR, FIXED32,  source,            5) \
 X(a, STATIC,   SINGULAR, FIXED32,  request_id,        6) \
 X(a, STATIC,   SINGULAR, FIXED32,  reply_id,          7) \
 X(a, STATIC,   SINGULAR, FIXED32,  emoji,             8) \
-X(a, STATIC,   OPTIONAL, UINT32,   bitfield,          9)
+X(a, STATIC,   OPTIONAL, UINT32,   bitfield,          9) \
+X(a, STATIC,   OPTIONAL, BYTES,    xeddsa_signature,  10)
 #define meshtastic_Data_CALLBACK NULL
 #define meshtastic_Data_DEFAULT NULL
 
@@ -1736,7 +1760,8 @@ X(a, STATIC,   SINGULAR, BOOL,     pki_encrypted,    17) \
 X(a, STATIC,   SINGULAR, UINT32,   next_hop,         18) \
 X(a, STATIC,   SINGULAR, UINT32,   relay_node,       19) \
 X(a, STATIC,   SINGULAR, UINT32,   tx_after,         20) \
-X(a, STATIC,   SINGULAR, UENUM,    transport_mechanism,  21)
+X(a, STATIC,   SINGULAR, UENUM,    transport_mechanism,  21) \
+X(a, STATIC,   SINGULAR, BOOL,     xeddsa_signed,    22)
 #define meshtastic_MeshPacket_CALLBACK NULL
 #define meshtastic_MeshPacket_DEFAULT NULL
 #define meshtastic_MeshPacket_payload_variant_decoded_MSGTYPE meshtastic_Data
@@ -1753,7 +1778,8 @@ X(a, STATIC,   SINGULAR, BOOL,     via_mqtt,          8) \
 X(a, STATIC,   OPTIONAL, UINT32,   hops_away,         9) \
 X(a, STATIC,   SINGULAR, BOOL,     is_favorite,      10) \
 X(a, STATIC,   SINGULAR, BOOL,     is_ignored,       11) \
-X(a, STATIC,   SINGULAR, BOOL,     is_key_manually_verified,  12)
+X(a, STATIC,   SINGULAR, BOOL,     is_key_manually_verified,  12) \
+X(a, STATIC,   SINGULAR, BOOL,     has_xeddsa_signed,  13)
 #define meshtastic_NodeInfo_CALLBACK NULL
 #define meshtastic_NodeInfo_DEFAULT NULL
 #define meshtastic_NodeInfo_user_MSGTYPE meshtastic_User
@@ -2036,7 +2062,7 @@ extern const pb_msgdesc_t meshtastic_ChunkedPayloadResponse_msg;
 #define meshtastic_ChunkedPayload_size           245
 #define meshtastic_ClientNotification_size       482
 #define meshtastic_Compressed_size               239
-#define meshtastic_Data_size                     269
+#define meshtastic_Data_size                     335
 #define meshtastic_DeviceMetadata_size           54
 #define meshtastic_DuplicatedPublicKey_size      0
 #define meshtastic_FileInfo_size                 236
@@ -2048,12 +2074,12 @@ extern const pb_msgdesc_t meshtastic_ChunkedPayloadResponse_msg;
 #define meshtastic_KeyVerification_size          79
 #define meshtastic_LogRecord_size                426
 #define meshtastic_LowEntropyKey_size            0
-#define meshtastic_MeshPacket_size               381
+#define meshtastic_MeshPacket_size               450
 #define meshtastic_MqttClientProxyMessage_size   501
 #define meshtastic_MyNodeInfo_size               83
 #define meshtastic_NeighborInfo_size             258
 #define meshtastic_Neighbor_size                 22
-#define meshtastic_NodeInfo_size                 323
+#define meshtastic_NodeInfo_size                 325
 #define meshtastic_NodeRemoteHardwarePin_size    29
 #define meshtastic_Position_size                 144
 #define meshtastic_QueueStatus_size              23

src/modules/AdminModule.cpp

@@ -773,33 +773,17 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
         config.lora = validatedLora;
         // If we're setting region for the first time, init the region and regenerate the keys
         if (isRegionUnset && config.lora.region > meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
-            if (!owner.is_licensed) {
-                bool keygenSuccess = false;
-                if (config.security.private_key.size == 32) {
-                    if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
-                        keygenSuccess = true;
-                    }
-                } else {
-                    LOG_INFO("Generate new PKI keys");
-                    crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes);
-                    keygenSuccess = true;
-                }
-                if (keygenSuccess) {
-                    config.security.public_key.size = 32;
-                    config.security.private_key.size = 32;
-                    owner.public_key.size = 32;
-                    memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
-                }
-            }
+            // Use consolidated key generation function
+            nodeDB->generateCryptoKeyPair();
             config.lora.tx_enabled = true;
             initRegion();
-            if (getEffectiveDutyCycle() < 100) {
+            if (myRegion->dutyCycle < 100) {
                 config.lora.ignore_mqtt = true; // Ignore MQTT by default if region has a duty cycle limit
             }
             //  Compare the entire string, we are sure of the length as a topic has never been set
             if (strcmp(moduleConfig.mqtt.root, default_mqtt_root) == 0) {
                 sprintf(moduleConfig.mqtt.root, "%s/%s", default_mqtt_root, myRegion->name);
-                changes = SEGMENT_CONFIG | SEGMENT_MODULECONFIG;
+                changes = SEGMENT_CONFIG | SEGMENT_MODULECONFIG | SEGMENT_NODEDATABASE | SEGMENT_DEVICESTATE;
             }
         }
         if (config.lora.region != myRegion->code) {
@@ -825,22 +809,14 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
         LOG_INFO("Set config: Security");
         config.security = c.payload_variant.security;
 #if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN) && !(MESHTASTIC_EXCLUDE_PKI)
-        // If the client set the key to blank, go ahead and regenerate so long as we're not in ham mode
-        if (!owner.is_licensed && config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
-            if (config.security.private_key.size != 32) {
-                crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes);
-
-            } else {
-                if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
-                    config.security.public_key.size = 32;
-                }
-            }
+        // Only regenerate keys if the private key is not 32 bytes
+        if (config.security.private_key.size != 32) {
+            nodeDB->generateCryptoKeyPair();
+        }
+        // If user provided a private key of correct size but no public key, generate the public key from private key
+        else if (config.security.private_key.size == 32 && config.security.public_key.size == 0) {
+            nodeDB->generateCryptoKeyPair(config.security.private_key.bytes);
         }
-#endif
-        owner.public_key.size = config.security.public_key.size;
-        memcpy(owner.public_key.bytes, config.security.public_key.bytes, config.security.public_key.size);
-#if !MESHTASTIC_EXCLUDE_PKI
-        crypto->setDHPrivateKey(config.security.private_key.bytes);
 #endif
         if (config.security.is_managed && !(config.security.admin_key[0].size == 32 || config.security.admin_key[1].size == 32 ||
                                             config.security.admin_key[2].size == 32)) {
@@ -850,9 +826,9 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
             sendWarning(warning);
         }
 
-        if (config.security.debug_log_api_enabled == c.payload_variant.security.debug_log_api_enabled &&
-            config.security.serial_enabled == c.payload_variant.security.serial_enabled)
-            requiresReboot = false;
+        changes = SEGMENT_CONFIG | SEGMENT_DEVICESTATE | SEGMENT_NODEDATABASE;
+
+        requiresReboot = true;
 
         break;
     case meshtastic_Config_device_ui_tag:

src/modules/CannedMessageModule.cpp

@@ -16,6 +16,7 @@
 #include "graphics/draw/NotificationRenderer.h"
 #include "graphics/emotes.h"
 #include "graphics/images.h"
+#include "input/SerialKeyboard.h"
 #include "main.h" // for cardkb_found
 #include "mesh/generated/meshtastic/cannedmessages.pb.h"
 #include "modules/AdminModule.h"
@@ -836,6 +837,7 @@ bool CannedMessageModule::handleFreeTextInput(const InputEvent *event)
     if (event->inputEvent == INPUT_BROKER_BACK && this->freetext.length() > 0) {
         payload = 0x08;
         lastTouchMillis = millis();
+        requestFocus();
         runOnce();
         return true;
     }
@@ -844,6 +846,7 @@ bool CannedMessageModule::handleFreeTextInput(const InputEvent *event)
     if (event->inputEvent == INPUT_BROKER_LEFT) {
         payload = INPUT_BROKER_LEFT;
         lastTouchMillis = millis();
+        requestFocus();
         runOnce();
         return true;
     }
@@ -851,6 +854,7 @@ bool CannedMessageModule::handleFreeTextInput(const InputEvent *event)
     if (event->inputEvent == INPUT_BROKER_RIGHT) {
         payload = INPUT_BROKER_RIGHT;
         lastTouchMillis = millis();
+        requestFocus();
         runOnce();
         return true;
     }
@@ -1845,7 +1849,88 @@ void CannedMessageModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *st
             display->drawString(x + display->getWidth() - display->getStringWidth(buffer), y + 0, buffer);
         }
 
-        // --- Draw Free Text input with multi-emote support and proper line wrapping ---
+#if INPUTBROKER_SERIAL_TYPE == 1
+        // Chatter Modifier key mode label (right side)
+        {
+            uint8_t mode = globalSerialKeyboard ? globalSerialKeyboard->getShift() : 0;
+            const char *label = (mode == 0) ? "a" : (mode == 1) ? "A" : "#";
+
+            display->setFont(FONT_SMALL);
+            display->setTextAlignment(TEXT_ALIGN_LEFT);
+
+            const int16_t th = FONT_HEIGHT_SMALL;
+            const int16_t tw = display->getStringWidth(label);
+            const int16_t padX = 3;
+            const int16_t padY = 2;
+            const int16_t r = 3;
+
+            const int16_t bw = tw + padX * 2;
+            const int16_t bh = th + padY * 2;
+
+            const int16_t bx = x + display->getWidth() - bw - 2;
+            const int16_t by = y + display->getHeight() - bh - 2;
+
+            display->setColor(WHITE);
+            display->fillRect(bx + r, by, bw - r * 2, bh);
+            display->fillRect(bx, by + r, r, bh - r * 2);
+            display->fillRect(bx + bw - r, by + r, r, bh - r * 2);
+            display->fillCircle(bx + r, by + r, r);
+            display->fillCircle(bx + bw - r - 1, by + r, r);
+            display->fillCircle(bx + r, by + bh - r - 1, r);
+            display->fillCircle(bx + bw - r - 1, by + bh - r - 1, r);
+
+            display->setColor(BLACK);
+            display->drawString(bx + padX, by + padY, label);
+        }
+
+        // LEFT-SIDE DESTINATION-HINT BOX (“Dest: Shift + ◄”)
+        {
+            display->setFont(FONT_SMALL);
+            display->setTextAlignment(TEXT_ALIGN_LEFT);
+
+            const char *label = "Dest: Shift + ";
+            int16_t labelW = display->getStringWidth(label);
+
+            // triangle size visually matches glyph height, not full line height
+            const int triH = FONT_HEIGHT_SMALL - 3;
+            const int triW = triH * 0.7;
+
+            const int16_t padX = 3;
+            const int16_t padY = 2;
+            const int16_t r = 3;
+
+            const int16_t bw = labelW + triW + padX * 2 + 2;
+            const int16_t bh = FONT_HEIGHT_SMALL + padY * 2;
+
+            const int16_t bx = x + 2;
+            const int16_t by = y + display->getHeight() - bh - 2;
+
+            // Rounded white box
+            display->setColor(WHITE);
+            display->fillRect(bx + r, by, bw - (r * 2), bh);
+            display->fillRect(bx, by + r, r, bh - (r * 2));
+            display->fillRect(bx + bw - r, by + r, r, bh - (r * 2));
+            display->fillCircle(bx + r, by + r, r);
+            display->fillCircle(bx + bw - r - 1, by + r, r);
+            display->fillCircle(bx + r, by + bh - r - 1, r);
+            display->fillCircle(bx + bw - r - 1, by + bh - r - 1, r);
+
+            // Draw text
+            display->setColor(BLACK);
+            display->drawString(bx + padX, by + padY, label);
+
+            // Perfectly center triangle on text baseline
+            int16_t tx = bx + padX + labelW;
+            int16_t ty = by + padY + (FONT_HEIGHT_SMALL / 2) - (triH / 2) - 1; // -1 for optical centering
+
+            // ◄ Left-pointing triangle
+            display->fillTriangle(tx + triW, ty,       // top-right
+                                  tx, ty + triH / 2,   // left center
+                                  tx + triW, ty + triH // bottom-right
+            );
+        }
+#endif
+        // Draw Free Text input with multi-emote support and proper line wrapping
         display->setColor(WHITE);
         {
             int inputY = 0 + y + FONT_HEIGHT_SMALL;

src/modules/ExternalNotificationModule.cpp

@@ -314,11 +314,10 @@ void ExternalNotificationModule::stopNow()
         audioThread->stop();
 #endif
     // Turn off all outputs
-    LOG_INFO("Turning off setExternalStates: ");
+    LOG_INFO("Turning off setExternalStates");
     for (int i = 0; i < 3; i++) {
         setExternalState(i, false);
         externalTurnedOn[i] = 0;
-        LOG_INFO("%d ", i);
     }
     setIntervalFromNow(0);
 #ifdef T_WATCH_S3

src/modules/Modules.cpp

@@ -13,6 +13,8 @@
 #include "input/TrackballInterruptImpl1.h"
 #endif
 
+#include "modules/StatusLEDModule.h"
+
 #if !MESHTASTIC_EXCLUDE_I2C
 #include "input/cardKbI2cImpl.h"
 #endif
@@ -119,6 +121,10 @@ void setupModules()
         buzzerFeedbackThread = new BuzzerFeedbackThread();
     }
 #endif
+#if defined(LED_CHARGE) || defined(LED_PAIRING)
+    statusLEDModule = new StatusLEDModule();
+#endif
+
 #if !MESHTASTIC_EXCLUDE_ADMIN
     adminModule = new AdminModule();
 #endif
@@ -175,12 +181,13 @@ void setupModules()
     // new ReplyModule();
 #if (HAS_BUTTON || ARCH_PORTDUINO) && !MESHTASTIC_EXCLUDE_INPUTBROKER
     if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
+#ifndef T_LORA_PAGER
         rotaryEncoderInterruptImpl1 = new RotaryEncoderInterruptImpl1();
         if (!rotaryEncoderInterruptImpl1->init()) {
             delete rotaryEncoderInterruptImpl1;
             rotaryEncoderInterruptImpl1 = nullptr;
         }
-#ifdef T_LORA_PAGER
+#elif defined(T_LORA_PAGER)
         // use a special FSM based rotary encoder version for T-LoRa Pager
         rotaryEncoderImpl = new RotaryEncoderImpl();
         if (!rotaryEncoderImpl->init()) {

src/modules/NodeInfoModule.cpp

@@ -22,6 +22,12 @@ bool NodeInfoModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, mes
         LOG_WARN("Invalid nodeInfo detected, is_licensed mismatch!");
         return true;
     }
+    NodeNum sourceNum = getFrom(&mp);
+    auto node = nodeDB->getMeshNode(sourceNum);
+    if (node && (node->bitfield & NODEINFO_BITFIELD_HAS_XEDDSA_SIGNED_MASK) && !mp.xeddsa_signed) {
+        LOG_WARN("Dropping unsigned NodeInfo from node 0x%08x that previously signed", sourceNum);
+        return true;
+    }
 
     // Coerce user.id to be derived from the node number
     snprintf(p.id, sizeof(p.id), "!%08x", getFrom(&mp));

src/modules/SerialModule.cpp

@@ -64,7 +64,8 @@ SerialModule *serialModule;
 SerialModuleRadio *serialModuleRadio;
 
 #if defined(TTGO_T_ECHO) || defined(CANARYONE) || defined(MESHLINK) || defined(ELECROW_ThinkNode_M1) ||                          \
-    defined(ELECROW_ThinkNode_M5) || defined(HELTEC_MESH_SOLAR) || defined(T_ECHO_LITE)
+    defined(ELECROW_ThinkNode_M5) || defined(HELTEC_MESH_SOLAR) || defined(T_ECHO_LITE) || defined(ELECROW_ThinkNode_M3) ||      \
+    defined(MUZI_BASE)
 SerialModule::SerialModule() : StreamAPI(&Serial), concurrency::OSThread("Serial")
 {
     api_type = TYPE_SERIAL;
@@ -204,7 +205,7 @@ int32_t SerialModule::runOnce()
                 Serial.setTimeout(moduleConfig.serial.timeout > 0 ? moduleConfig.serial.timeout : TIMEOUT);
             }
 #elif !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(MESHLINK) &&                             \
-    !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M5)
+    !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M5) && !defined(MUZI_BASE)
             if (moduleConfig.serial.rxd && moduleConfig.serial.txd) {
 #ifdef ARCH_RP2040
                 Serial2.setFIFOSize(RX_BUFFER);
@@ -261,7 +262,7 @@ int32_t SerialModule::runOnce()
             }
 
 #if !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(MESHLINK) &&                               \
-    !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M5)
+    !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M5) && !defined(MUZI_BASE)
             else if ((moduleConfig.serial.mode == meshtastic_ModuleConfig_SerialConfig_Serial_Mode_WS85)) {
                 processWXSerial();
 
@@ -536,7 +537,8 @@ ParsedLine parseLine(const char *line)
 void SerialModule::processWXSerial()
 {
 #if !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(CONFIG_IDF_TARGET_ESP32C6) &&              \
-    !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M5) && !defined(ARCH_STM32WL)
+    !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M5) &&  \
+    !defined(ARCH_STM32WL) && !defined(MUZI_BASE)
     static unsigned int lastAveraged = 0;
     static unsigned int averageIntervalMillis = 300000; // 5 minutes hard coded.
     static double dir_sum_sin = 0;

src/modules/StatusLEDModule.cpp

@@ -0,0 +1,94 @@
+#include "StatusLEDModule.h"
+#include "MeshService.h"
+#include "configuration.h"
+#include <Arduino.h>
+
+/*
+StatusLEDModule manages the device's status LEDs, updating their states based on power and Bluetooth status.
+It reflects charging, charged, discharging, and Bluetooth connection states using the appropriate LEDs.
+*/
+StatusLEDModule *statusLEDModule;
+
+StatusLEDModule::StatusLEDModule() : concurrency::OSThread("StatusLEDModule")
+{
+    bluetoothStatusObserver.observe(&bluetoothStatus->onNewStatus);
+    powerStatusObserver.observe(&powerStatus->onNewStatus);
+}
+
+int StatusLEDModule::handleStatusUpdate(const meshtastic::Status *arg)
+{
+    switch (arg->getStatusType()) {
+    case STATUS_TYPE_POWER: {
+        meshtastic::PowerStatus *powerStatus = (meshtastic::PowerStatus *)arg;
+        if (powerStatus->getHasUSB()) {
+            power_state = charging;
+            if (powerStatus->getBatteryChargePercent() >= 100) {
+                power_state = charged;
+            }
+        } else {
+            power_state = discharging;
+        }
+        break;
+    }
+    case STATUS_TYPE_BLUETOOTH: {
+        meshtastic::BluetoothStatus *bluetoothStatus = (meshtastic::BluetoothStatus *)arg;
+        switch (bluetoothStatus->getConnectionState()) {
+        case meshtastic::BluetoothStatus::ConnectionState::DISCONNECTED: {
+            ble_state = unpaired;
+            PAIRING_LED_starttime = millis();
+            break;
+        }
+        case meshtastic::BluetoothStatus::ConnectionState::PAIRING: {
+            ble_state = pairing;
+            PAIRING_LED_starttime = millis();
+            break;
+        }
+        case meshtastic::BluetoothStatus::ConnectionState::CONNECTED: {
+            ble_state = connected;
+            PAIRING_LED_starttime = millis();
+            break;
+        }
+        }
+
+        break;
+    }
+    }
+    return 0;
+};
+
+int32_t StatusLEDModule::runOnce()
+{
+
+    if (power_state == charging) {
+        CHARGE_LED_state = !CHARGE_LED_state;
+    } else if (power_state == charged) {
+        CHARGE_LED_state = LED_STATE_ON;
+    } else {
+        CHARGE_LED_state = LED_STATE_OFF;
+    }
+
+    if (!config.bluetooth.enabled || PAIRING_LED_starttime + 30 * 1000 < millis()) {
+        PAIRING_LED_state = LED_STATE_OFF;
+    } else if (ble_state == unpaired) {
+        if (slowTrack) {
+            PAIRING_LED_state = !PAIRING_LED_state;
+            slowTrack = false;
+        } else {
+            slowTrack = true;
+        }
+    } else if (ble_state == pairing) {
+        PAIRING_LED_state = !PAIRING_LED_state;
+    } else {
+        PAIRING_LED_state = LED_STATE_ON;
+    }
+
+#ifdef LED_CHARGE
+    digitalWrite(LED_CHARGE, CHARGE_LED_state);
+#endif
+    // digitalWrite(green_LED_PIN, LED_STATE_OFF);
+#ifdef LED_PAIRING
+    digitalWrite(LED_PAIRING, PAIRING_LED_state);
+#endif
+
+    return (my_interval);
+}

src/modules/StatusLEDModule.h

@@ -0,0 +1,44 @@
+#pragma once
+
+#include "BluetoothStatus.h"
+#include "MeshModule.h"
+#include "PowerStatus.h"
+#include "concurrency/OSThread.h"
+#include "configuration.h"
+#include <Arduino.h>
+#include <functional>
+
+class StatusLEDModule : private concurrency::OSThread
+{
+    bool slowTrack = false;
+
+  public:
+    StatusLEDModule();
+
+    int handleStatusUpdate(const meshtastic::Status *);
+
+  protected:
+    unsigned int my_interval = 1000; // interval in millisconds
+    virtual int32_t runOnce() override;
+
+    CallbackObserver<StatusLEDModule, const meshtastic::Status *> bluetoothStatusObserver =
+        CallbackObserver<StatusLEDModule, const meshtastic::Status *>(this, &StatusLEDModule::handleStatusUpdate);
+    CallbackObserver<StatusLEDModule, const meshtastic::Status *> powerStatusObserver =
+        CallbackObserver<StatusLEDModule, const meshtastic::Status *>(this, &StatusLEDModule::handleStatusUpdate);
+
+  private:
+    bool CHARGE_LED_state = LED_STATE_OFF;
+    bool PAIRING_LED_state = LED_STATE_OFF;
+
+    uint32_t PAIRING_LED_starttime = 0;
+
+    enum PowerState { discharging, charging, charged };
+
+    PowerState power_state = discharging;
+
+    enum BLEState { unpaired, pairing, connected };
+
+    BLEState ble_state = unpaired;
+};
+
+extern StatusLEDModule *statusLEDModule;

src/modules/SystemCommandsModule.cpp

@@ -1,4 +1,5 @@
 #include "SystemCommandsModule.h"
+#include "input/InputBroker.h"
 #include "meshUtils.h"
 #if HAS_SCREEN
 #include "graphics/Screen.h"
@@ -22,7 +23,7 @@ SystemCommandsModule::SystemCommandsModule()
 
 int SystemCommandsModule::handleInputEvent(const InputEvent *event)
 {
-    LOG_INFO("Input event %u! kb %u", event->inputEvent, event->kbchar);
+    LOG_INPUT("SystemCommands Input event %u! kb %u", event->inputEvent, event->kbchar);
     // System commands (all others fall through)
     switch (event->kbchar) {
     // Fn key symbols
@@ -85,10 +86,8 @@ int SystemCommandsModule::handleInputEvent(const InputEvent *event)
     switch (event->inputEvent) {
         // GPS
     case INPUT_BROKER_GPS_TOGGLE:
-        LOG_WARN("GPS Toggle");
 #if !MESHTASTIC_EXCLUDE_GPS
         if (gps) {
-            LOG_WARN("GPS Toggle2");
             if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED &&
                 config.position.fixed_position == false) {
                 nodeDB->clearLocalPosition();

src/modules/Telemetry/Sensor/AHT10.cpp

@@ -35,7 +35,7 @@ bool AHT10Sensor::getMetrics(meshtastic_Telemetry *measurement)
     // prefer other sensors like bmp280, bmp3xx
     if (!measurement->variant.environment_metrics.has_temperature) {
         measurement->variant.environment_metrics.has_temperature = true;
-        measurement->variant.environment_metrics.temperature = temp.temperature;
+        measurement->variant.environment_metrics.temperature = temp.temperature + AHT10_TEMP_OFFSET;
     }
 
     if (!measurement->variant.environment_metrics.has_relative_humidity) {

src/modules/Telemetry/Sensor/AHT10.h

@@ -6,6 +6,10 @@
 
 #if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<Adafruit_AHTX0.h>)
 
+#ifndef AHT10_TEMP_OFFSET
+#define AHT10_TEMP_OFFSET 0
+#endif
+
 #include "../mesh/generated/meshtastic/telemetry.pb.h"
 #include "TelemetrySensor.h"
 #include <Adafruit_AHTX0.h>

src/modules/Telemetry/Sensor/DFRobotGravitySensor.cpp

@@ -13,7 +13,10 @@ DFRobotGravitySensor::DFRobotGravitySensor() : TelemetrySensor(meshtastic_Teleme
 DFRobotGravitySensor::~DFRobotGravitySensor()
 {
     if (gravity) {
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wdelete-non-virtual-dtor"
         delete gravity;
+#pragma GCC diagnostic pop
         gravity = nullptr;
     }
 }

src/modules/TraceRouteModule.cpp

@@ -11,6 +11,113 @@ extern graphics::Screen *screen;
 
 TraceRouteModule *traceRouteModule;
 
+void TraceRouteModule::setResultText(const String &text)
+{
+    resultText = text;
+    resultLines.clear();
+    resultLinesDirty = true;
+}
+
+void TraceRouteModule::clearResultLines()
+{
+    resultLines.clear();
+    resultLinesDirty = false;
+}
+#if HAS_SCREEN
+void TraceRouteModule::rebuildResultLines(OLEDDisplay *display)
+{
+    if (!display) {
+        resultLinesDirty = false;
+        return;
+    }
+
+    resultLines.clear();
+
+    if (resultText.length() == 0) {
+        resultLinesDirty = false;
+        return;
+    }
+
+    int maxWidth = display->getWidth() - 4;
+    if (maxWidth <= 0) {
+        resultLinesDirty = false;
+        return;
+    }
+
+    int start = 0;
+    int textLength = resultText.length();
+
+    while (start <= textLength) {
+        int newlinePos = resultText.indexOf('\n', start);
+        String segment;
+
+        if (newlinePos != -1) {
+            segment = resultText.substring(start, newlinePos);
+            start = newlinePos + 1;
+        } else {
+            segment = resultText.substring(start);
+            start = textLength + 1;
+        }
+
+        if (segment.length() == 0) {
+            resultLines.push_back("");
+            continue;
+        }
+
+        if (display->getStringWidth(segment) <= maxWidth) {
+            resultLines.push_back(segment);
+            continue;
+        }
+
+        String remaining = segment;
+
+        while (remaining.length() > 0) {
+            String tempLine = "";
+            int lastGoodBreak = -1;
+            bool lineComplete = false;
+
+            for (int i = 0; i < static_cast<int>(remaining.length()); i++) {
+                char ch = remaining.charAt(i);
+                String testLine = tempLine + ch;
+
+                if (display->getStringWidth(testLine) > maxWidth) {
+                    if (lastGoodBreak >= 0) {
+                        resultLines.push_back(remaining.substring(0, lastGoodBreak + 1));
+                        remaining = remaining.substring(lastGoodBreak + 1);
+                        lineComplete = true;
+                        break;
+                    } else if (tempLine.length() > 0) {
+                        resultLines.push_back(tempLine);
+                        remaining = remaining.substring(i);
+                        lineComplete = true;
+                        break;
+                    } else {
+                        resultLines.push_back(String(ch));
+                        remaining = remaining.substring(i + 1);
+                        lineComplete = true;
+                        break;
+                    }
+                } else {
+                    tempLine = testLine;
+                    if (ch == ' ' || ch == '>' || ch == '<' || ch == '-' || ch == '(' || ch == ')' || ch == ',') {
+                        lastGoodBreak = i;
+                    }
+                }
+            }
+
+            if (!lineComplete) {
+                if (tempLine.length() > 0) {
+                    resultLines.push_back(tempLine);
+                }
+                break;
+            }
+        }
+    }
+
+    resultLinesDirty = false;
+}
+#endif
+
 bool TraceRouteModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_RouteDiscovery *r)
 {
     // We only alter the packet in alterReceivedProtobuf()
@@ -406,7 +513,7 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
     if (node == 0 || node == NODENUM_BROADCAST) {
         LOG_ERROR("Invalid node number for trace route: 0x%08x", node);
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "Invalid node";
+        setResultText("Invalid node");
         resultShowTime = millis();
         tracingNode = 0;
 
@@ -420,7 +527,7 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
     if (node == nodeDB->getNodeNum()) {
         LOG_ERROR("Cannot trace route to self: 0x%08x", node);
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "Cannot trace self";
+        setResultText("Cannot trace self");
         resultShowTime = millis();
         tracingNode = 0;
 
@@ -447,6 +554,8 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
         unsigned long wait = (cooldownMs - (now - lastTraceRouteTime)) / 1000;
         bannerText = String("Wait for ") + String(wait) + String("s");
         runState = TRACEROUTE_STATE_COOLDOWN;
+        resultText = "";
+        clearResultLines();
 
         requestFocus();
         UIFrameEvent e;
@@ -459,6 +568,8 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
     tracingNode = node;
     lastTraceRouteTime = now;
     runState = TRACEROUTE_STATE_TRACKING;
+    resultText = "";
+    clearResultLines();
     bannerText = String("Tracing ") + getNodeName(node);
 
     LOG_INFO("TraceRoute UI: Starting trace route to node 0x%08x, requesting focus", node);
@@ -501,7 +612,7 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
         } else {
             LOG_ERROR("MeshService is NULL!");
             runState = TRACEROUTE_STATE_RESULT;
-            resultText = "Service unavailable";
+            setResultText("Service unavailable");
             resultShowTime = millis();
             tracingNode = 0;
 
@@ -514,7 +625,7 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
     } else {
         LOG_ERROR("Failed to allocate TraceRoute packet from router");
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "Failed to send";
+        setResultText("Failed to send");
         resultShowTime = millis();
         tracingNode = 0;
 
@@ -532,7 +643,7 @@ void TraceRouteModule::launch(NodeNum node)
     if (node == 0 || node == NODENUM_BROADCAST) {
         LOG_ERROR("Invalid node number for trace route: 0x%08x", node);
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "Invalid node";
+        setResultText("Invalid node");
         resultShowTime = millis();
         tracingNode = 0;
 
@@ -546,7 +657,7 @@ void TraceRouteModule::launch(NodeNum node)
     if (node == nodeDB->getNodeNum()) {
         LOG_ERROR("Cannot trace route to self: 0x%08x", node);
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "Cannot trace self";
+        setResultText("Cannot trace self");
         resultShowTime = millis();
         tracingNode = 0;
 
@@ -568,6 +679,8 @@ void TraceRouteModule::launch(NodeNum node)
         unsigned long wait = (cooldownMs - (now - lastTraceRouteTime)) / 1000;
         bannerText = String("Wait for ") + String(wait) + String("s");
         runState = TRACEROUTE_STATE_COOLDOWN;
+        resultText = "";
+        clearResultLines();
 
         requestFocus();
         UIFrameEvent e;
@@ -580,6 +693,8 @@ void TraceRouteModule::launch(NodeNum node)
     runState = TRACEROUTE_STATE_TRACKING;
     tracingNode = node;
     lastTraceRouteTime = now;
+    resultText = "";
+    clearResultLines();
     bannerText = String("Tracing ") + getNodeName(node);
 
     requestFocus();
@@ -614,14 +729,14 @@ void TraceRouteModule::launch(NodeNum node)
         } else {
             LOG_ERROR("MeshService is NULL!");
             runState = TRACEROUTE_STATE_RESULT;
-            resultText = "Service unavailable";
+            setResultText("Service unavailable");
             resultShowTime = millis();
             tracingNode = 0;
         }
     } else {
         LOG_ERROR("Failed to allocate TraceRoute packet from router");
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "Failed to send";
+        setResultText("Failed to send");
         resultShowTime = millis();
         tracingNode = 0;
     }
@@ -629,7 +744,7 @@ void TraceRouteModule::launch(NodeNum node)
 
 void TraceRouteModule::handleTraceRouteResult(const String &result)
 {
-    resultText = result;
+    setResultText(result);
     runState = TRACEROUTE_STATE_RESULT;
     resultShowTime = millis();
     tracingNode = 0;
@@ -679,83 +794,15 @@ void TraceRouteModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state
         display->setFont(FONT_SMALL);
 
         if (resultText.length() > 0) {
-            std::vector<String> lines;
-            String currentLine = "";
-            int maxWidth = display->getWidth() - 4;
-
-            int start = 0;
-            int newlinePos = resultText.indexOf('\n', start);
-
-            while (newlinePos != -1 || start < static_cast<int>(resultText.length())) {
-                String segment;
-                if (newlinePos != -1) {
-                    segment = resultText.substring(start, newlinePos);
-                    start = newlinePos + 1;
-                    newlinePos = resultText.indexOf('\n', start);
-                } else {
-                    segment = resultText.substring(start);
-                    start = resultText.length();
-                }
-
-                if (display->getStringWidth(segment) <= maxWidth) {
-                    lines.push_back(segment);
-                } else {
-                    // Try to break at better positions (space, >, <, -)
-                    String remaining = segment;
-
-                    while (remaining.length() > 0) {
-                        String tempLine = "";
-                        int lastGoodBreak = -1;
-                        bool lineComplete = false;
-
-                        for (int i = 0; i < static_cast<int>(remaining.length()); i++) {
-                            char ch = remaining.charAt(i);
-                            String testLine = tempLine + ch;
-
-                            if (display->getStringWidth(testLine) > maxWidth) {
-                                if (lastGoodBreak >= 0) {
-                                    // Break at the last good position
-                                    lines.push_back(remaining.substring(0, lastGoodBreak + 1));
-                                    remaining = remaining.substring(lastGoodBreak + 1);
-                                    lineComplete = true;
-                                    break;
-                                } else if (tempLine.length() > 0) {
-                                    lines.push_back(tempLine);
-                                    remaining = remaining.substring(i);
-                                    lineComplete = true;
-                                    break;
-                                } else {
-                                    // Single character exceeds width
-                                    lines.push_back(String(ch));
-                                    remaining = remaining.substring(i + 1);
-                                    lineComplete = true;
-                                    break;
-                                }
-                            } else {
-                                tempLine = testLine;
-                                // Mark good break positions
-                                if (ch == ' ' || ch == '>' || ch == '<' || ch == '-' || ch == '(' || ch == ')') {
-                                    lastGoodBreak = i;
-                                }
-                            }
-                        }
-
-                        if (!lineComplete) {
-                            // Reached end of remaining text
-                            if (tempLine.length() > 0) {
-                                lines.push_back(tempLine);
-                            }
-                            break;
-                        }
-                    }
-                }
+            if (resultLinesDirty) {
+                rebuildResultLines(display);
             }
 
             int lineHeight = FONT_HEIGHT_SMALL + 1; // Use proper font height with 1px spacing
-            for (size_t i = 0; i < lines.size(); i++) {
+            for (size_t i = 0; i < resultLines.size(); i++) {
                 int lineY = contentStartY + (i * lineHeight);
                 if (lineY + FONT_HEIGHT_SMALL <= display->getHeight()) {
-                    display->drawString(x + 2, lineY, lines[i]);
+                    display->drawString(x + 2, lineY, resultLines[i]);
                 }
             }
         }
@@ -779,7 +826,7 @@ int32_t TraceRouteModule::runOnce()
     if (runState == TRACEROUTE_STATE_TRACKING && now - lastTraceRouteTime > trackingTimeoutMs) {
         LOG_INFO("TraceRoute timeout, no response received");
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "No response received";
+        setResultText("No response received");
         resultShowTime = now;
         tracingNode = 0;
 
@@ -815,6 +862,8 @@ int32_t TraceRouteModule::runOnce()
             // Cooldown finished
             LOG_INFO("TraceRoute cooldown finished, returning to IDLE");
             runState = TRACEROUTE_STATE_IDLE;
+            resultText = "";
+            clearResultLines();
             bannerText = "";
             UIFrameEvent e;
             e.action = UIFrameEvent::Action::REGENERATE_FRAMESET;
@@ -828,6 +877,7 @@ int32_t TraceRouteModule::runOnce()
             LOG_INFO("TraceRoute result display timeout, returning to IDLE");
             runState = TRACEROUTE_STATE_IDLE;
             resultText = "";
+            clearResultLines();
             bannerText = "";
             tracingNode = 0;
             UIFrameEvent e;

src/modules/TraceRouteModule.h

@@ -7,6 +7,7 @@
 #if HAS_SCREEN
 #include "OLEDDisplayUi.h"
 #endif
+#include <vector>
 
 #define ROUTE_SIZE sizeof(((meshtastic_RouteDiscovery *)0)->route) / sizeof(((meshtastic_RouteDiscovery *)0)->route[0])
 
@@ -49,6 +50,11 @@ class TraceRouteModule : public ProtobufModule<meshtastic_RouteDiscovery>,
     virtual int32_t runOnce() override;
 
   private:
+    void setResultText(const String &text);
+    void clearResultLines();
+#if HAS_SCREEN
+    void rebuildResultLines(OLEDDisplay *display);
+#endif
     // Call to add unknown hops (e.g. when a node couldn't decrypt it) to the route based on hopStart and current hopLimit
     void insertUnknownHops(meshtastic_MeshPacket &p, meshtastic_RouteDiscovery *r, bool isTowardsDestination);
 
@@ -74,6 +80,8 @@ class TraceRouteModule : public ProtobufModule<meshtastic_RouteDiscovery>,
     unsigned long trackingTimeoutMs = 10000;
     String bannerText;
     String resultText;
+    std::vector<String> resultLines;
+    bool resultLinesDirty = false;
     NodeNum tracingNode = 0;
     bool initialized = false;
 };

src/motion/BMX160Sensor.cpp

@@ -115,7 +115,13 @@ int32_t BMX160Sensor::runOnce()
 void BMX160Sensor::calibrate(uint16_t forSeconds)
 {
 #if !defined(MESHTASTIC_EXCLUDE_SCREEN)
+    sBmx160SensorData_t magAccel;
+    sBmx160SensorData_t gAccel;
     LOG_DEBUG("BMX160 calibration started for %is", forSeconds);
+    sensor.getAllData(&magAccel, NULL, &gAccel);
+    highestX = magAccel.x, lowestX = magAccel.x;
+    highestY = magAccel.y, lowestY = magAccel.y;
+    highestZ = magAccel.z, lowestZ = magAccel.z;
 
     doCalibration = true;
     uint16_t calibrateFor = forSeconds * 1000; // calibrate for seconds provided
@@ -127,4 +133,4 @@ void BMX160Sensor::calibrate(uint16_t forSeconds)
 
 #endif
 
-#endif
+#endif

src/motion/ICM20948Sensor.cpp

@@ -47,6 +47,21 @@ int32_t ICM20948Sensor::runOnce()
 int32_t ICM20948Sensor::runOnce()
 {
 #if !defined(MESHTASTIC_EXCLUDE_SCREEN) && HAS_SCREEN
+#if defined(MUZI_BASE) // temporarily gated to single device due to feature freeze
+    if (screen && !screen->isScreenOn() && !config.display.wake_on_tap_or_motion && !config.device.double_tap_as_button_press) {
+        if (!isAsleep) {
+            LOG_DEBUG("sleeping IMU");
+            sensor->sleep(true);
+            isAsleep = true;
+        }
+        return MOTION_SENSOR_CHECK_INTERVAL_MS;
+    }
+    if (isAsleep) {
+        sensor->sleep(false);
+        isAsleep = false;
+    }
+#endif
+
     float magX = 0, magY = 0, magZ = 0;
     if (sensor->dataReady()) {
         sensor->getAGMT();
@@ -156,7 +171,20 @@ int32_t ICM20948Sensor::runOnce()
 void ICM20948Sensor::calibrate(uint16_t forSeconds)
 {
 #if !defined(MESHTASTIC_EXCLUDE_SCREEN) && HAS_SCREEN
+    LOG_DEBUG("Old calibration data: highestX = %f, lowestX = %f, highestY = %f, lowestY = %f, highestZ = %f, lowestZ = %f",
+              highestX, lowestX, highestY, lowestY, highestZ, lowestZ);
     LOG_DEBUG("BMX160 calibration started for %is", forSeconds);
+    if (sensor->dataReady()) {
+        sensor->getAGMT();
+        highestX = sensor->agmt.mag.axes.x;
+        lowestX = sensor->agmt.mag.axes.x;
+        highestY = sensor->agmt.mag.axes.y;
+        lowestY = sensor->agmt.mag.axes.y;
+        highestZ = sensor->agmt.mag.axes.z;
+        lowestZ = sensor->agmt.mag.axes.z;
+    } else {
+        highestX = 0, lowestX = 0, highestY = 0, lowestY = 0, highestZ = 0, lowestZ = 0;
+    }
 
     doCalibration = true;
     uint16_t calibrateFor = forSeconds * 1000; // calibrate for seconds provided
@@ -295,4 +323,4 @@ bool ICM20948Singleton::setWakeOnMotion()
     return true;
 }
 
-#endif
+#endif