This should work now !?

The Heltec solar node still uses ArduinoJSON for god knows what in its included custom library.

.clusterfuzzlite/Dockerfile

@@ -18,7 +18,7 @@ ENV PIP_ROOT_USER_ACTION=ignore
 # trunk-ignore(hadolint/DL3008): apt packages are not pinned.
 # trunk-ignore(terrascan/AC_DOCKER_0002): apt packages are not pinned.
 RUN apt-get update && apt-get install --no-install-recommends -y \
-        cmake git zip libgpiod-dev libbluetooth-dev libi2c-dev \
+        cmake git zip libgpiod-dev libjsoncpp-dev libbluetooth-dev libi2c-dev \
         libunistring-dev libmicrohttpd-dev libgnutls28-dev libgcrypt20-dev \
         libusb-1.0-0-dev libssl-dev pkg-config libsqlite3-dev libsdl2-dev && \
     apt-get clean && rm -rf /var/lib/apt/lists/* && \

.clusterfuzzlite/build.sh

@@ -31,7 +31,7 @@ cmake --install "$WORK/ulfius/$SANITIZER" --prefix /usr
 cd "$SRC/firmware"
 
 PLATFORMIO_EXTRA_SCRIPTS=$(echo -e "pre:.clusterfuzzlite/platformio-clusterfuzzlite-pre.py\npost:.clusterfuzzlite/platformio-clusterfuzzlite-post.py")
-STATIC_LIBS=$(pkg-config --libs --static libulfius openssl libgpiod yaml-cpp bluez --silence-errors)
+STATIC_LIBS=$(pkg-config --libs --static libulfius openssl libgpiod yaml-cpp jsoncpp bluez --silence-errors)
 export PLATFORMIO_EXTRA_SCRIPTS
 export STATIC_LIBS
 export PLATFORMIO_WORKSPACE_DIR="$WORK/pio/$SANITIZER"

.devcontainer/Dockerfile

@@ -16,6 +16,7 @@ RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
     libssl-dev \
     libulfius-dev \
     libyaml-cpp-dev \
+    libjsoncpp-dev \
     pipx \
     pkg-config \
     python3 \

.github/actions/setup-base/action.yml

@@ -13,7 +13,7 @@ runs:
       shell: bash
       run: |
         sudo apt-get -y update --fix-missing
-        sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev lsb-release
+        sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev libjsoncpp-dev lsb-release
 
     - name: Setup Python
       uses: actions/setup-python@v6

.github/actions/setup-native/action.yml

@@ -11,4 +11,4 @@ runs:
     - name: Install libs needed for native build
       shell: bash
       run: |
-        sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev libuv1-dev
+        sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev libjsoncpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev libuv1-dev

.github/copilot-instructions.md

@@ -4,11 +4,11 @@ This document provides context and guidelines for AI assistants working with the
 
 ## Project Overview
 
-Meshtastic is an open-source LoRa mesh networking project for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware enables text messaging, location sharing, and telemetry over a decentralized mesh network.
+Meshtastic is an open-source LoRa mesh networking project for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware enables text messaging, location sharing, and telemetry over a decentralized mesh network. The project uses **C++17** as its language standard across all platforms.
 
 ### Supported Hardware Platforms
 
-- **ESP32** (ESP32, ESP32-S3, ESP32-C3) - Most common platform
+- **ESP32** (ESP32, ESP32-S3, ESP32-C3, ESP32-C6) - Most common platform
 - **nRF52** (nRF52840, nRF52833) - Low power Nordic chips
 - **RP2040/RP2350** - Raspberry Pi Pico variants
 - **STM32WL** - STM32 with integrated LoRa
@@ -80,21 +80,46 @@ firmware/
 │   │   ├── NodeDB.*       # Node database management
 │   │   ├── Router.*       # Packet routing
 │   │   ├── Channels.*     # Channel management
+│   │   ├── CryptoEngine.* # AES-CCM encryption
 │   │   ├── *Interface.*   # Radio interface implementations
+│   │   ├── api/           # WiFi/Ethernet server APIs (ServerAPI, PacketAPI)
+│   │   ├── http/          # HTTP server (WebServer, ContentHandler)
+│   │   ├── wifi/          # WiFi support (WiFiAPClient)
+│   │   ├── eth/           # Ethernet support (ethClient)
+│   │   ├── udp/           # UDP multicast
+│   │   ├── compression/   # Message compression (unishox2)
 │   │   └── generated/     # Protobuf generated code
 │   ├── modules/           # Feature modules (Position, Telemetry, etc.)
+│   │   └── Telemetry/     # Telemetry subsystem
+│   │       └── Sensor/    # 50+ I2C sensor drivers
 │   ├── gps/               # GPS handling
 │   ├── graphics/          # Display drivers and UI
-│   ├── platform/          # Platform-specific code
-│   ├── input/             # Input device handling
-│   └── concurrency/       # Threading utilities
+│   │   └── niche/         # Specialized UIs (InkHUD e-ink framework)
+│   ├── platform/          # Platform-specific code (esp32, nrf52, rp2xx0, stm32wl, portduino)
+│   ├── input/             # Input device handling (InputBroker, keyboards, buttons)
+│   ├── detect/            # I2C hardware auto-detection (80+ device types)
+│   ├── motion/            # Accelerometer drivers (BMA423, BMI270, MPU6050, etc.)
+│   ├── mqtt/              # MQTT bridge client
+│   ├── power/             # Power HAL
+│   ├── nimble/            # BLE via NimBLE
+│   ├── buzz/              # Audio/notification (buzzer, RTTTL)
+│   ├── serialization/     # JSON serialization, COBS encoding
+│   ├── watchdog/          # Hardware watchdog thread
+│   ├── concurrency/       # Threading utilities (OSThread, Lock)
+│   ├── PowerFSM.*         # Power finite state machine
+│   └── Observer.h         # Observer/Observable event pattern
 ├── variants/              # Hardware variant definitions
 │   ├── esp32/            # ESP32 variants
 │   ├── esp32s3/          # ESP32-S3 variants
-│   ├── nrf52/            # nRF52 variants
-│   └── rp2xxx/           # RP2040/RP2350 variants
+│   ├── esp32c3/          # ESP32-C3 variants
+│   ├── esp32c6/          # ESP32-C6 variants
+│   ├── nrf52840/         # nRF52 variants
+│   ├── rp2040/           # RP2040/RP2350 variants
+│   ├── stm32/            # STM32WL variants
+│   └── native/           # Linux/Portduino variants
 ├── protobufs/            # Protocol buffer definitions
 ├── boards/               # Custom PlatformIO board definitions
+├── test/                 # Unit tests (12 test suites)
 └── bin/                  # Build and utility scripts
 ```
 
@@ -105,6 +130,7 @@ firmware/
 - Follow existing code style - run `trunk fmt` before commits
 - Prefer `LOG_DEBUG`, `LOG_INFO`, `LOG_WARN`, `LOG_ERROR` for logging
 - Use `assert()` for invariants that should never fail
+- C++17 features are available (`std::optional`, structured bindings, `if constexpr`, etc.)
 
 ### Naming Conventions
 
@@ -118,70 +144,151 @@ firmware/
 
 #### Module System
 
-Modules inherit from `MeshModule` or `ProtobufModule<T>` and implement:
+Modules use a three-tier class hierarchy:
 
-- `handleReceivedProtobuf()` - Process incoming packets
-- `allocReply()` - Generate response packets
-- `runOnce()` - Periodic task execution (returns next run interval in ms)
+1. **`MeshModule`** - Base class. Implement `wantPacket()` and `handleReceived()`. Returns `ProcessMessage::STOP` or `ProcessMessage::CONTINUE`.
+2. **`SinglePortModule`** - Handles a single portnum. Simplified `wantPacket()` that checks `decoded.portnum`.
+3. **`ProtobufModule<T>`** - Template for protobuf-based modules. Handles encoding/decoding automatically.
+
+Most modules also inherit from **`OSThread`** for periodic tasks (the "mixin" pattern):
 
 ```cpp
-class MyModule : public ProtobufModule<meshtastic_MyMessage>
+class MyModule : public ProtobufModule<meshtastic_MyMessage>, private concurrency::OSThread
 {
+  public:
+    MyModule();
+
   protected:
     virtual bool handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_MyMessage *msg) override;
-    virtual int32_t runOnce() override;
+    virtual meshtastic_MeshPacket *allocReply() override;       // Generate response packets
+    virtual int32_t runOnce() override;                         // Periodic task (returns next interval in ms)
+    virtual bool alterReceivedProtobuf(meshtastic_MeshPacket &mp, meshtastic_MyMessage *msg); // Modify in-flight
+    virtual bool wantUIFrame();                                 // Request a UI display frame
 };
 ```
 
+Modules are registered in `src/modules/Modules.cpp` guarded by `MESHTASTIC_EXCLUDE_*` flags.
+
+#### Observer/Observable Pattern
+
+Event-driven communication between subsystems uses `src/Observer.h`:
+
+```cpp
+// Observable emits events
+Observable<const meshtastic::Status *> newStatus;
+newStatus.notifyObservers(&status);
+
+// Observer receives events via callback
+CallbackObserver<MyClass, const meshtastic::Status *> statusObserver =
+    CallbackObserver<MyClass, const meshtastic::Status *>(this, &MyClass::handleStatusUpdate);
+```
+
 #### Configuration Access
 
 - `config.*` - Device configuration (LoRa, position, power, etc.)
 - `moduleConfig.*` - Module-specific configuration
 - `channels.*` - Channel configuration and management
+- `owner` - Device owner info
+- `myNodeInfo` - Local node info
 
 #### Default Values
 
 Use the `Default` class helpers in `src/mesh/Default.h`:
 
 - `Default::getConfiguredOrDefaultMs(configured, default)` - Returns ms, using default if configured is 0
+- `Default::getConfiguredOrDefault(configured, default)` - Generic configured/default getter
 - `Default::getConfiguredOrMinimumValue(configured, min)` - Enforces minimum values
 - `Default::getConfiguredOrDefaultMsScaled(configured, default, numNodes)` - Scales based on network size
 
 #### Thread Safety
 
-- Use `concurrency::Lock` for mutex protection
+- Use `concurrency::Lock` and `concurrency::LockGuard` for mutex protection
 - Radio SPI access uses `SPILock`
 - Prefer `OSThread` for background tasks
 
+### Hardware Detection
+
+`src/detect/ScanI2C` automatically enumerates 80+ I2C device types at boot including displays, sensors, RTCs, keyboards, PMUs, and touch controllers. This drives automatic initialization of the correct drivers.
+
+### Graphics/UI System
+
+Multiple display driver families in `src/graphics/`:
+
+- **OLED**: SSD1306, SH1106, ST7567
+- **TFT**: TFTDisplay (LovyanGFX-based)
+- **E-Ink**: EInkDisplay2, EInkDynamicDisplay, EInkParallelDisplay
+
+**InkHUD** (`src/graphics/niche/InkHUD/`) is an event-driven e-ink UI framework:
+
+- Applet-based architecture — modular display tiles
+- Read-only, static display optimized for minimal refreshes and low power
+- Configured per-variant via `nicheGraphics.h`
+- Separate PlatformIO config: `src/graphics/niche/InkHUD/PlatformioConfig.ini`
+
+### Input System
+
+`src/input/InputBroker` is the centralized input event dispatcher. Supports multiple input sources: buttons, keyboards (BBQ10, Cardputer, TCA8418), touch screens, rotary encoders, and matrix keyboards.
+
+### Power Management
+
+`src/PowerFSM.*` implements a finite state machine with states: `stateON`, `statePOWER`, `stateSERIAL`, `stateDARK`. Key events: `EVENT_PRESS`, `EVENT_WAKE_TIMER`, `EVENT_LOW_BATTERY`, `EVENT_RECEIVED_MSG`, `EVENT_SHUTDOWN`. Conditionally excluded with `MESHTASTIC_EXCLUDE_POWER_FSM` (falls back to `FakeFsm`).
+
+### Motion Sensors
+
+`src/motion/AccelerometerThread` provides background motion monitoring with automatic screen wake and double-tap button press detection. Supports 10+ accelerometer/gyroscope chips (BMA423, BMI270, MPU6050, LIS3DH, LSM6DS3, STK8XXX, QMA6100P, ICM20948, BMX160).
+
+### Telemetry Sensor Library
+
+`src/modules/Telemetry/Sensor/` contains 50+ I2C sensor drivers organized by category:
+
+- **Power monitoring**: INA219/226/260/3221, MAX17048
+- **Environmental**: BME280/680, SCD4X (CO₂), SEN5X (particulate)
+- **Humidity/Temperature**: SHT3X/4X, AHT10, MCP9808, MLX90614
+- **Light**: BH1750, TSL2561/2591, VEML7700, LTR390UV, OPT3001
+- **Air quality**: PMSA003I, SFA30
+- **Specialized**: CGRadSens (radiation), NAU7802 (weight scale)
+
+### API/Networking
+
+`src/mesh/api/` provides a template-based `ServerAPI` for client communication over WiFi (`WiFiServerAPI`) and Ethernet (`ethServerAPI`). Default port: **4403**. HTTP server in `src/mesh/http/`. JSON serialization in `src/serialization/MeshPacketSerializer`.
+
 ### Hardware Variants
 
 Each hardware variant has:
 
 - `variant.h` - Pin definitions and hardware capabilities
 - `platformio.ini` - Build configuration
-- Optional: `pins_arduino.h`, `rfswitch.h`
+- Optional: `pins_arduino.h`, `rfswitch.h`, `nicheGraphics.h` (for InkHUD variants)
 
 Key defines in variant.h:
 
 ```cpp
 #define USE_SX1262          // Radio chip selection
 #define HAS_GPS 1           // Hardware capabilities
+#define HAS_SCREEN 1        // Display present
 #define LORA_CS 36          // Pin assignments
 #define SX126X_DIO1 14      // Radio-specific pins
 ```
 
 ### Protobuf Messages
 
-- Defined in `protobufs/meshtastic/*.proto`
-- Generated code in `src/mesh/generated/`
+- Defined in `protobufs/meshtastic/*.proto` (~32 proto files)
+- Generated code in `src/mesh/generated/meshtastic/`
 - Regenerate with `bin/regen-protos.sh`
 - Message types prefixed with `meshtastic_`
+- Nanopb `.options` files control field sizes and encoding
 
 ### Conditional Compilation
 
 ```cpp
 #if !MESHTASTIC_EXCLUDE_GPS        // Feature exclusion
+#if !MESHTASTIC_EXCLUDE_WIFI       // Network feature exclusion
+#if !MESHTASTIC_EXCLUDE_BLUETOOTH  // BLE exclusion
+#if !MESHTASTIC_EXCLUDE_POWER_FSM  // Power FSM exclusion
 #ifdef ARCH_ESP32                   // Architecture-specific
+#ifdef ARCH_NRF52                   // Nordic platform
+#ifdef ARCH_RP2040                  // Raspberry Pi Pico
+#ifdef ARCH_PORTDUINO               // Linux native
 #if defined(USE_SX1262)            // Radio-specific
 #ifdef HAS_SCREEN                   // Hardware capability
 #if USERPREFS_EVENT_MODE           // User preferences
@@ -192,7 +299,7 @@ Key defines in variant.h:
 Uses **PlatformIO** with custom scripts:
 
 - `bin/platformio-pre.py` - Pre-build script
-- `bin/platformio-custom.py` - Custom build logic
+- `bin/platformio-custom.py` - Custom build logic, manifest generation
 
 Build commands:
 
@@ -202,21 +309,38 @@ pio run -e tbeam -t upload    # Build and upload
 pio run -e native             # Build native/Linux version
 ```
 
+### Build Manifest
+
+`bin/platformio-custom.py` emits a build manifest with metadata:
+
+- `hasMui`, `hasInkHud` - UI capability flags (overridable via `custom_meshtastic_has_mui`, `custom_meshtastic_has_ink_hud`)
+- Architecture normalization (e.g., `esp32s3` → `esp32-s3` for API compatibility)
+
 ## Common Tasks
 
 ### Adding a New Module
 
 1. Create `src/modules/MyModule.cpp` and `.h`
-2. Inherit from appropriate base class
-3. Register in `src/modules/Modules.cpp`
-4. Add protobuf messages if needed in `protobufs/`
+2. Inherit from appropriate base class (`MeshModule`, `SinglePortModule`, or `ProtobufModule<T>`)
+3. Mix in `concurrency::OSThread` if periodic work is needed
+4. Register in `src/modules/Modules.cpp` guarded by `#if !MESHTASTIC_EXCLUDE_MYMODULE`
+5. Add protobuf messages if needed in `protobufs/meshtastic/`
+6. Add test suite in `test/test_mymodule/` if applicable
 
 ### Adding a New Hardware Variant
 
 1. Create directory under `variants/<arch>/<name>/`
-2. Add `variant.h` with pin definitions
-3. Add `platformio.ini` with build config
-4. Reference common configs with `extends`
+2. Add `variant.h` with pin definitions and hardware capability defines
+3. Add `platformio.ini` with build config — use `extends` to reference common base (e.g., `esp32s3_base`)
+4. Set `custom_meshtastic_support_level = 1` (PR builds) or `2` (merge builds)
+5. For e-ink displays, add `nicheGraphics.h` for InkHUD configuration
+
+### Adding a New Telemetry Sensor
+
+1. Create driver in `src/modules/Telemetry/Sensor/` following existing sensor pattern
+2. Register I2C address in `src/detect/ScanI2C` for auto-detection
+3. Integrate with the appropriate telemetry module (Environment, Health, Power, AirQuality)
+4. Add proto fields in `protobufs/meshtastic/telemetry.proto` if new data types are needed
 
 ### Modifying Configuration Defaults
 
@@ -305,9 +429,22 @@ Most workflows can be triggered manually via `workflow_dispatch` for testing.
 
 ## Testing
 
-- Unit tests in `test/` directory
-- Run with `pio test -e native`
-- Use `bin/test-simulator.sh` for simulation testing
+Unit tests in `test/` directory with 12 test suites:
+
+- `test_crypto/` - Cryptography
+- `test_mqtt/` - MQTT integration
+- `test_radio/` - Radio interface
+- `test_mesh_module/` - Module framework
+- `test_meshpacket_serializer/` - Packet serialization
+- `test_transmit_history/` - Retransmission tracking
+- `test_atak/` - ATAK integration
+- `test_default/` - Default configuration
+- `test_http_content_handler/` - HTTP handling
+- `test_serial/` - Serial communication
+
+Run with: `pio test -e native`
+
+Simulation testing: `bin/test-simulator.sh`
 
 ## Resources
 

.github/prompts/new-module.prompt.md

@@ -0,0 +1,138 @@
+# New Meshtastic Module
+
+Guide for developing a new Meshtastic firmware module.
+
+## Module Hierarchy
+
+Choose the appropriate base class:
+
+1. **`MeshModule`** — Raw base class. Override `wantPacket()` and `handleReceived()`. Returns `ProcessMessage::STOP` or `ProcessMessage::CONTINUE`.
+2. **`SinglePortModule`** — Handles a single `meshtastic_PortNum`. Constructor takes `(name, portNum)`. Simplified `wantPacket()` checking `decoded.portnum`. Use `allocDataPacket()` to create outgoing packets.
+3. **`ProtobufModule<T>`** — Template for protobuf-encoded modules. Constructor takes `(name, portNum, fields)`. Override `handleReceivedProtobuf()`. Use `allocDataProtobuf(payload)` to create outgoing packets.
+
+Most modules also mix in `concurrency::OSThread` for periodic background tasks.
+
+## Implementation Pattern
+
+```cpp
+// src/modules/MyModule.h
+#pragma once
+#include "ProtobufModule.h"
+#include "concurrency/OSThread.h"
+
+class MyModule : public ProtobufModule<meshtastic_MyMessage>, private concurrency::OSThread
+{
+  public:
+    MyModule();
+
+  protected:
+    // Process incoming protobuf packet. Return true to stop further processing.
+    virtual bool handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_MyMessage *msg) override;
+
+    // Generate response packet (optional)
+    virtual meshtastic_MeshPacket *allocReply() override;
+
+    // Periodic task — return next run interval in ms, or disable()
+    virtual int32_t runOnce() override;
+
+    // Modify packet in-flight before delivery (optional)
+    virtual bool alterReceivedProtobuf(meshtastic_MeshPacket &mp, meshtastic_MyMessage *msg);
+
+    // Request a UI display frame (optional)
+    virtual bool wantUIFrame();
+};
+```
+
+## Registration
+
+Register in `src/modules/Modules.cpp` inside `setupModules()`:
+
+```cpp
+#if !MESHTASTIC_EXCLUDE_MYMODULE
+    new MyModule();
+#endif
+```
+
+If other code needs to reference the module instance:
+
+```cpp
+#if !MESHTASTIC_EXCLUDE_MYMODULE
+    myModule = new MyModule();
+#endif
+```
+
+And declare the global in the header:
+
+```cpp
+extern MyModule *myModule;
+```
+
+Some modules also conditionally instantiate based on `moduleConfig`:
+
+```cpp
+#if !MESHTASTIC_EXCLUDE_MYMODULE
+    if (moduleConfig.has_my_module && moduleConfig.my_module.enabled) {
+        new MyModule();
+    }
+#endif
+```
+
+## Conditional Compilation
+
+Add a `MESHTASTIC_EXCLUDE_MYMODULE` guard. This allows the module to be excluded from constrained builds. The flag name must follow the pattern: `MESHTASTIC_EXCLUDE_` + uppercase module name.
+
+## Protobuf Messages (if needed)
+
+1. Define messages in `protobufs/meshtastic/` (e.g., `mymodule.proto`)
+2. Add a `.options` file for nanopb field size constraints
+3. Regenerate with `bin/regen-protos.sh`
+4. Generated code appears in `src/mesh/generated/meshtastic/`
+5. Assign a `meshtastic_PortNum` if the module uses a new port number
+
+## Timing and Defaults
+
+Use `Default` class helpers for configurable intervals:
+
+```cpp
+int32_t MyModule::runOnce()
+{
+    uint32_t interval = Default::getConfiguredOrDefaultMs(moduleConfig.my_module.update_interval,
+                                                          default_my_module_interval);
+    // ... do work ...
+    return interval;
+}
+```
+
+On public/default channels, enforce minimums with `Default::getConfiguredOrMinimumValue()`.
+
+## Observer Pattern
+
+Subscribe to system events:
+
+```cpp
+CallbackObserver<MyModule, const meshtastic::Status *> statusObserver =
+    CallbackObserver<MyModule, const meshtastic::Status *>(this, &MyModule::handleStatusUpdate);
+```
+
+## Testing
+
+Add test suite in `test/test_mymodule/`:
+
+```
+test/
+└── test_mymodule/
+    └── test_main.cpp
+```
+
+Run with: `pio test -e native`
+
+## Checklist
+
+- [ ] Header and implementation files in `src/modules/`
+- [ ] Inherit from appropriate base class (MeshModule / SinglePortModule / ProtobufModule)
+- [ ] Mix in OSThread if periodic work is needed
+- [ ] Register in `src/modules/Modules.cpp` with `MESHTASTIC_EXCLUDE_` guard
+- [ ] Add protobuf definitions if needed (`protobufs/meshtastic/`)
+- [ ] Use `Default::getConfiguredOrDefaultMs()` for timing
+- [ ] Respect bandwidth limits on public channels
+- [ ] Add test suite in `test/`

.github/prompts/new-sensor.prompt.md

@@ -0,0 +1,149 @@
+# New Telemetry Sensor
+
+Guide for adding a new I2C telemetry sensor driver to Meshtastic firmware.
+
+## Overview
+
+Telemetry sensors live in `src/modules/Telemetry/Sensor/`. There are 50+ existing drivers organized by measurement type. Each sensor integrates with one of the telemetry modules:
+
+- **EnvironmentTelemetryModule** — Temperature, humidity, pressure, gas, light
+- **AirQualityTelemetryModule** — Particulate matter, VOCs
+- **PowerTelemetryModule** — Voltage, current, power monitoring
+- **HealthTelemetryModule** — Heart rate, SpO2, body temperature
+
+## Sensor Driver Pattern
+
+Each sensor has a `.h` and `.cpp` file pair following this pattern:
+
+```cpp
+// src/modules/Telemetry/Sensor/MySensor.h
+#pragma once
+#include "TelemetrySensor.h"
+#include <MySensorLibrary.h>  // Arduino/PlatformIO library
+
+class MySensor : virtual public TelemetrySensor
+{
+  private:
+    MySensorLibrary sensor;
+
+  public:
+    MySensor() : TelemetrySensor(meshtastic_TelemetrySensorType_MY_SENSOR, "MySensor") {}
+
+    // Initialize sensor hardware. Return true on success.
+    virtual void setup() override;
+
+    // Read sensor data into the telemetry protobuf. Return true on success.
+    virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
+};
+```
+
+```cpp
+// src/modules/Telemetry/Sensor/MySensor.cpp
+#include "MySensor.h"
+#include "TelemetrySensor.h"
+
+void MySensor::setup()
+{
+    sensor.begin();
+    // Configure sensor parameters...
+}
+
+bool MySensor::getMetrics(meshtastic_Telemetry *measurement)
+{
+    // Read from hardware
+    float value = sensor.readValue();
+
+    // Populate the appropriate protobuf variant
+    measurement->variant.environment_metrics.temperature = value;
+    // ... other fields ...
+
+    return true;
+}
+```
+
+## I2C Address Registration
+
+Register the sensor's I2C address(es) in `src/detect/ScanI2C` so it's auto-detected at boot:
+
+1. Add a `DeviceType` enum entry in `src/detect/ScanI2C.h`
+2. Add the I2C address mapping in `src/detect/ScanI2CTwoWire.cpp`
+
+The scan runs at boot and populates a device map that telemetry modules use to decide which sensors to initialize.
+
+## Protobuf Fields
+
+If the sensor provides data not covered by existing telemetry fields:
+
+1. Add fields to the appropriate message in `protobufs/meshtastic/telemetry.proto`:
+   - `EnvironmentMetrics` — Environmental measurements
+   - `AirQualityMetrics` — Air quality data
+   - `PowerMetrics` — Power/energy data
+   - `HealthMetrics` — Health/biometric data
+2. Add a `.options` constraint if needed (field sizes for nanopb)
+3. Regenerate: `bin/regen-protos.sh`
+
+## Sensor Type Enum
+
+Add the sensor to `meshtastic_TelemetrySensorType` enum in `protobufs/meshtastic/telemetry.proto`:
+
+```protobuf
+enum TelemetrySensorType {
+    // ... existing entries ...
+    MY_SENSOR = XX;
+}
+```
+
+## Integration with Telemetry Module
+
+Wire the sensor into the appropriate telemetry module. For environment sensors, this is typically in `src/modules/Telemetry/EnvironmentTelemetry.cpp`:
+
+1. Include the sensor header
+2. Add initialization in `setupSensor()` guarded by detection results
+3. Call `getMetrics()` in the measurement collection path
+
+Example pattern from existing sensors:
+
+```cpp
+#include "Sensor/MySensor.h"
+
+MySensor mySensor;
+
+// In setup:
+if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_MY_SENSOR].first > 0) {
+    mySensor.setup();
+}
+
+// In measurement collection:
+if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_MY_SENSOR].first > 0) {
+    mySensor.getMetrics(&measurement);
+}
+```
+
+## Library Dependencies
+
+If the sensor needs an external library, add it to the `lib_deps` in the relevant base platformio.ini configs:
+
+```ini
+lib_deps =
+    ${env.lib_deps}
+    mysensorlibrary@^1.0.0
+```
+
+Or use a conditional dependency if it's platform-specific.
+
+## Unit Conversions
+
+If the sensor reports values in non-standard units, use `src/modules/Telemetry/UnitConversions.h` for conversion helpers (e.g., Celsius ↔ Fahrenheit, hPa ↔ inHg).
+
+## Checklist
+
+- [ ] Create `src/modules/Telemetry/Sensor/MySensor.h` and `.cpp`
+- [ ] Inherit from `TelemetrySensor` base class
+- [ ] Implement `setup()` and `getMetrics()` methods
+- [ ] Add `meshtastic_TelemetrySensorType` enum entry in `telemetry.proto`
+- [ ] Add I2C address to `src/detect/ScanI2C` for auto-detection
+- [ ] Add protobuf fields in `telemetry.proto` if new data types needed
+- [ ] Regenerate protos: `bin/regen-protos.sh`
+- [ ] Wire into the appropriate telemetry module (Environment/AirQuality/Power/Health)
+- [ ] Add library dependency if external library required
+- [ ] Test on hardware or native build

.github/prompts/new-variant.prompt.md

@@ -0,0 +1,178 @@
+# New Hardware Variant
+
+Guide for adding a new Meshtastic hardware variant to the firmware.
+
+## Directory Structure
+
+Create under `variants/<arch>/<name>/`:
+
+```
+variants/
+├── esp32/          # ESP32
+├── esp32s3/        # ESP32-S3
+├── esp32c3/        # ESP32-C3
+├── esp32c6/        # ESP32-C6
+├── nrf52840/       # nRF52840
+├── rp2040/         # RP2040/RP2350
+├── stm32/          # STM32WL
+└── native/         # Linux/Portduino
+```
+
+Each variant needs at minimum:
+
+- `variant.h` — Pin definitions and hardware capabilities
+- `platformio.ini` — Build configuration
+
+Optional files:
+
+- `pins_arduino.h` — Arduino pin mapping overrides
+- `rfswitch.h` — RF switch control for multi-band radios
+- `nicheGraphics.h` — InkHUD e-ink configuration
+
+## variant.h Template
+
+```cpp
+// Pin definitions
+#define I2C_SDA 21
+#define I2C_SCL 22
+
+// LoRa radio
+#define USE_SX1262              // Radio chip: USE_SX1262, USE_SX1268, USE_SX1280, USE_RF95, USE_LLCC68, USE_LR1110, USE_LR1120, USE_LR1121
+#define LORA_CS   18
+#define LORA_SCK  5
+#define LORA_MOSI 27
+#define LORA_MISO 19
+#define LORA_DIO1 33            // SX126x: DIO1, SX128x: DIO1, RF95: IRQ
+#define LORA_RESET 23
+#define LORA_BUSY 32            // SX126x/SX128x only
+#define SX126X_DIO2_AS_RF_SWITCH // Common for SX1262 boards
+
+// GPS
+#define HAS_GPS 1
+#define GPS_RX_PIN 34
+#define GPS_TX_PIN 12
+// #define PIN_GPS_EN 47         // Optional GPS enable pin
+// #define GPS_BAUDRATE 9600     // Override default 9600
+
+// Display
+#define HAS_SCREEN 1
+// #define USE_SSD1306            // OLED type
+// #define USE_SH1106             // Alternative OLED
+// #define USE_ST7789             // TFT type
+// #define SCREEN_WIDTH 128
+// #define SCREEN_HEIGHT 64
+
+// LEDs
+#define LED_PIN 2               // Status LED (optional)
+// #define HAS_NEOPIXEL 1        // WS2812 support
+
+// Buttons
+#define BUTTON_PIN 38
+// #define BUTTON_PIN_ALT 0      // Secondary button
+
+// Power management
+// #define HAS_AXP192 1          // AXP192 PMU (T-Beam v1.0)
+// #define HAS_AXP2101 1         // AXP2101 PMU (T-Beam v1.2+)
+// #define BATTERY_PIN 35        // ADC battery voltage pin
+// #define ADC_MULTIPLIER 2.0    // Voltage divider ratio
+
+// Optional I2C devices
+// #define HAS_RTC 1             // Real-time clock
+// #define HAS_TELEMETRY 1       // Enable telemetry sensor support
+// #define HAS_SENSOR 1          // I2C sensors present
+```
+
+## platformio.ini Template
+
+```ini
+[env:my_variant]
+extends = esp32s3_base            ; Use architecture-specific base
+board = esp32-s3-devkitc-1        ; PlatformIO board definition (or custom in boards/)
+board_level = extra               ; Build level: extra, or omit for default
+custom_meshtastic_support_level = 1  ; 1 = PR builds, 2 = merge builds only
+
+build_flags =
+    ${esp32s3_base.build_flags}
+    -D MY_VARIANT_SPECIFIC_FLAG=1
+    -I variants/esp32s3/my_variant  ; Include path for variant.h
+
+upload_speed = 921600
+```
+
+### Common Base Configs
+
+- `esp32_base` / `esp32-common.ini` — ESP32
+- `esp32s3_base` — ESP32-S3
+- `esp32c3_base` — ESP32-C3
+- `esp32c6_base` — ESP32-C6
+- `nrf52840_base` / `nrf52.ini` — nRF52840
+- `rp2040_base` — RP2040/RP2350
+
+### Support Levels
+
+- `custom_meshtastic_support_level = 1` — Built on every PR (actively supported)
+- `custom_meshtastic_support_level = 2` — Built only on merge to main branches
+- `board_level = extra` — Only built on full releases
+
+## Build Manifest Metadata
+
+`bin/platformio-custom.py` emits UI capability flags in the build manifest:
+
+- `custom_meshtastic_has_mui = true/false` — Override MUI detection
+- `custom_meshtastic_has_ink_hud = true/false` — Override InkHUD detection
+- Architecture names are normalized (e.g., `esp32s3` → `esp32-s3`)
+
+## InkHUD E-Ink Variants
+
+For e-ink display variants using the InkHUD framework, add `nicheGraphics.h`:
+
+```cpp
+// nicheGraphics.h — InkHUD configuration for this variant
+#define INKHUD                     // Enable InkHUD
+// Configure display, applets, and refresh behavior per device
+```
+
+InkHUD has its own PlatformIO config: `src/graphics/niche/InkHUD/PlatformioConfig.ini`
+
+## I2C Device Detection
+
+If the variant has I2C devices, ensure `src/detect/ScanI2C` will detect them. The auto-detection system handles 80+ device types including displays, sensors, RTCs, keyboards, PMUs, and touch controllers at boot.
+
+## Custom Board Definitions
+
+If the PlatformIO board doesn't exist, create a custom board JSON in `boards/`:
+
+```json
+{
+  "build": {
+    "arduino": { "ldscript": "esp32s3_out.ld" },
+    "core": "esp32",
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "mcu": "esp32s3",
+    "variant": "esp32s3"
+  },
+  "connectivity": ["wifi", "bluetooth"],
+  "frameworks": ["arduino", "espidf"],
+  "name": "My Custom Board",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608
+  },
+  "url": "https://example.com",
+  "vendor": "MyVendor"
+}
+```
+
+## Checklist
+
+- [ ] Create `variants/<arch>/<name>/variant.h` with pin definitions
+- [ ] Create `variants/<arch>/<name>/platformio.ini` extending correct base
+- [ ] Set `custom_meshtastic_support_level` (1 or 2)
+- [ ] Verify radio chip define matches hardware (`USE_SX1262`, etc.)
+- [ ] Set hardware capability flags (`HAS_GPS`, `HAS_SCREEN`, etc.)
+- [ ] Add custom board JSON in `boards/` if needed
+- [ ] Test build: `pio run -e my_variant`
+- [ ] For e-ink: add `nicheGraphics.h` with InkHUD config

.github/workflows/build_one_target.yml

@@ -4,9 +4,14 @@ on:
   workflow_dispatch:
     inputs:
       # trunk-ignore(checkov/CKV_GHA_7)
+      target:
+        type: string
+        required: false
+        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
       arch:
         type: choice
         options:
+          - all
           - esp32
           - esp32s3
           - esp32c3
@@ -15,32 +20,18 @@ on:
           - rp2040
           - rp2350
           - stm32
-      target:
-        type: string
-        required: false
-        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
-      # find-target:
-      #   type: boolean
-      #   default: true
-      #   description: 'Find the available targets'
+        description: Choose an arch to limit the search, or 'all' to search all architectures.
+        default: all
 
 permissions: read-all
 
 jobs:
   find-targets:
-    if: ${{ inputs.target == '' }}
     strategy:
       fail-fast: false
       matrix:
         arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
+          - all
     runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v6
@@ -51,14 +42,37 @@ jobs:
       - run: pip install -U platformio
       - name: Generate matrix
         id: jsonStep
+        env:
+          BUILDTARGET: ${{ inputs.target }}
+          MATRIXARCH: ${{ inputs.arch }}
         run: |
           TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level extra)
-          echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
-          echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
-          echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
-          echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
-          echo "Targets:" >> $GITHUB_STEP_SUMMARY
-          echo $TARGETS | jq -r 'sort_by(.board) |.[] | "- " + .board' >> $GITHUB_STEP_SUMMARY
+          if [ "$BUILDTARGET" = "" ]; then
+            echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
+            echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
+            echo "Arch: $MATRIXARCH" >> $GITHUB_STEP_SUMMARY
+            echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
+            echo "## 🎯 The following target boards are available to build:" >> $GITHUB_STEP_SUMMARY
+            echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
+            echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
+            echo $TARGETS | jq -r 'sort_by(.board) | sort_by(.platform) |.[] | "| " + .platform + " | " + .board + " |" ' >> $GITHUB_STEP_SUMMARY
+          else
+            echo "We build this one:" >> $GITHUB_STEP_SUMMARY
+            ARCH=$(echo "$TARGETS" | jq --arg BUILDTARGET "$BUILDTARGET" -r '.[] | select(.board==$BUILDTARGET) | .platform')
+            echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
+            echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
+            echo "| $ARCH | "$BUILDTARGET" |" >> $GITHUB_STEP_SUMMARY
+            echo "" >> $GITHUB_STEP_SUMMARY
+            if [[ "$ARCH" == "" ]]; then
+              echo "## ❌ Error: Target "$BUILDTARGET" not found!" >> $GITHUB_STEP_SUMMARY
+            else
+              echo "## ✅ Target "$BUILDTARGET" found, proceeding to build." >> $GITHUB_STEP_SUMMARY
+            fi
+            echo "You may need to refresh this page to make the built firmware appear below." >> $GITHUB_STEP_SUMMARY
+            echo "arch=$ARCH" >> $GITHUB_OUTPUT
+          fi
+    outputs:
+      arch: ${{ steps.jsonStep.outputs.arch }}
 
   version:
     if: ${{ inputs.target != '' }}
@@ -78,12 +92,12 @@ jobs:
 
   build:
     if: ${{ inputs.target != '' && inputs.arch != 'native' }}
-    needs: [version]
+    needs: [version, find-targets]
     uses: ./.github/workflows/build_firmware.yml
     with:
       version: ${{ needs.version.outputs.long }}
       pio_env: ${{ inputs.target }}
-      platform: ${{ inputs.arch }}
+      platform: ${{ needs.find-targets.outputs.arch }}
 
   gather-artifacts:
     permissions:

.github/workflows/docker_build.yml

@@ -56,6 +56,25 @@ jobs:
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v4
+        with:
+          cache-image: true
+
+      - name: Docker setup
+        uses: docker/setup-buildx-action@v4
+        with:
+          # Add Google/Amazon DockerHub mirrors to buildkit config
+          # https://docs.docker.com/build/ci/github-actions/configure-builder/#registry-mirror
+          buildkitd-config-inline: |
+            [registry."docker.io"]
+              mirrors = ["mirror.gcr.io", "public.ecr.aws"]
+
+      - name: Sanitize platform string
+        id: sanitize_platform
+        # Replace slashes with underscores
+        run: echo "cleaned_platform=${{ inputs.platform }}" | sed 's/\//_/g' >> $GITHUB_OUTPUT
+
       - name: Docker login
         if: ${{ inputs.push }}
         uses: docker/login-action@v4
@@ -63,17 +82,6 @@ jobs:
           username: meshtastic
           password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
 
-      - name: Set up QEMU
-        uses: docker/setup-qemu-action@v4
-
-      - name: Docker setup
-        uses: docker/setup-buildx-action@v4
-
-      - name: Sanitize platform string
-        id: sanitize_platform
-        # Replace slashes with underscores
-        run: echo "cleaned_platform=${{ inputs.platform }}" | sed 's/\//_/g' >> $GITHUB_OUTPUT
-
       - name: Docker tag
         id: meta
         uses: docker/metadata-action@v6
@@ -95,3 +103,6 @@ jobs:
           platforms: ${{ inputs.platform }}
           build-args: |
             PIO_ENV=${{ inputs.pio_env }}
+          # Cache image layers in GitHub Actions cache to speed up subsequent builds.
+          cache-from: type=gha
+          cache-to: type=gha,mode=max

.github/workflows/main_matrix.yml

@@ -301,15 +301,17 @@ jobs:
         id: release_notes
         run: |
           chmod +x ./bin/generate_release_notes.py
-          NOTES=$(./bin/generate_release_notes.py ${{ needs.version.outputs.long }})
+          NOTES=$(./bin/generate_release_notes.py ${{ needs.version.outputs.long }} --compare-ref HEAD 2>release_notes.log)
           echo "notes<<EOF" >> $GITHUB_OUTPUT
           echo "$NOTES" >> $GITHUB_OUTPUT
           echo "EOF" >> $GITHUB_OUTPUT
+          echo "### Release note range" >> $GITHUB_STEP_SUMMARY
+          cat release_notes.log >> $GITHUB_STEP_SUMMARY
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Create release
-        uses: softprops/action-gh-release@v2
+        uses: softprops/action-gh-release@v3
         id: create_release
         with:
           draft: true
@@ -466,7 +468,7 @@ jobs:
       - name: Generate release notes
         run: |
           chmod +x ./bin/generate_release_notes.py
-          ./bin/generate_release_notes.py ${{ needs.version.outputs.long }} > ./publish/release_notes.md
+          ./bin/generate_release_notes.py ${{ needs.version.outputs.long }} --compare-ref HEAD > ./publish/release_notes.md
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 

.github/workflows/models_issue_triage.yml

@@ -38,7 +38,7 @@ jobs:
 
       - name: Apply quality label if needed
         if: steps.quality.outputs.response != '' && steps.quality.outputs.response != 'ok'
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
         env:
           QUALITY_LABEL: ${{ steps.quality.outputs.response }}
         with:
@@ -80,7 +80,7 @@ jobs:
       # ─────────────────────────────────────────────────────────────────────────
       - name: Determine if completeness check should be skipped
         if: steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == ''
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
         id: check-skip
         with:
           script: |
@@ -134,7 +134,7 @@ jobs:
 
       - name: Process analysis result
         if: (steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == '') && steps.check-skip.outputs.should_skip != 'true' && steps.analysis.outputs.response != ''
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
         id: process
         env:
           AI_RESPONSE: ${{ steps.analysis.outputs.response }}
@@ -174,7 +174,7 @@ jobs:
 
       - name: Apply triage label
         if: steps.process.outputs.label != '' && steps.process.outputs.label != 'none'
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
         env:
           LABEL_NAME: ${{ steps.process.outputs.label }}
         with:
@@ -200,7 +200,7 @@ jobs:
 
       - name: Comment on issue
         if: steps.process.outputs.should_comment == 'true'
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
         env:
           COMMENT_BODY: ${{ steps.process.outputs.comment_body }}
         with:

.github/workflows/models_pr_triage.yml

@@ -22,7 +22,7 @@ jobs:
       # Step 1: Check if PR already has automation/type labels (skip if so)
       # ─────────────────────────────────────────────────────────────────────────
       - name: Check existing labels
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
         id: check-labels
         with:
           script: |
@@ -58,7 +58,7 @@ jobs:
 
       - name: Apply quality label if needed
         if: steps.check-labels.outputs.skip_all != 'true' && steps.quality.outputs.response != '' && steps.quality.outputs.response != 'ok'
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
         id: quality-label
         env:
           QUALITY_LABEL: ${{ steps.quality.outputs.response }}
@@ -113,7 +113,7 @@ jobs:
 
       - name: Apply type label
         if: steps.check-labels.outputs.skip_all != 'true' && steps.check-labels.outputs.has_type_label != 'true' && steps.classify.outputs.response != ''
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
         env:
           TYPE_LABEL: ${{ steps.classify.outputs.response }}
         with:

.github/workflows/package_ppa.yml

@@ -5,6 +5,8 @@ on:
     secrets:
       PPA_GPG_PRIVATE_KEY:
         required: true
+      PPA_SFTP_PRIVATE_KEY:
+        required: true
     inputs:
       ppa_repo:
         description: Meshtastic PPA to target
@@ -27,6 +29,7 @@ jobs:
       build_location: ppa
 
   package-ppa:
+    if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
     runs-on: ubuntu-24.04
     needs: build-debian-src
     steps:
@@ -40,7 +43,7 @@ jobs:
         shell: bash
         run: |
           sudo apt-get update -y --fix-missing
-          sudo apt-get install -y dput
+          sudo apt-get install -y dput openssh-client
 
       - name: Import GPG key
         uses: crazy-max/ghaction-import-gpg@v7
@@ -65,8 +68,42 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -lah
 
-      - name: Publish with dput
-        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        timeout-minutes: 15 # dput is terrible, sometimes runs 'forever'
+      - name: Trust Launchpad's SSH key
         run: |
-          dput ${{ inputs.ppa_repo }} meshtasticd_${{ steps.version.outputs.deb }}~${{ inputs.series }}_source.changes
+          mkdir -p ~/.ssh
+          ssh-keyscan -H ppa.launchpad.net >> ~/.ssh/known_hosts
+
+      - name: Setup dput config
+        env:
+          ppa_login: meshtasticorg
+        run: |
+          sudo tee /etc/meshtastic-dput.cf >/dev/null <<EOF
+          [ppa]
+          fqdn                    = ppa.launchpad.net
+          method                  = ftp
+          incoming                = ~%(ppa)s
+          login                   = anonymous
+
+          [ssh-ppa]
+          fqdn                    = ppa.launchpad.net
+          method                  = sftp
+          incoming                = ~%(ssh-ppa)s
+          login                   = ${ppa_login}
+          EOF
+
+      - name: Import SSH key
+        uses: webfactory/ssh-agent@v0.10.0
+        with:
+          ssh-private-key: ${{ secrets.PPA_SFTP_PRIVATE_KEY }}
+        id: ssh
+
+      - name: Publish with dput (sftp)
+        timeout-minutes: 30 # dput is terrible, sometimes runs 'forever'
+        env:
+          up_ppa_repo: ${{ inputs.ppa_repo }}
+          up_series: ${{ inputs.series }}
+          up_version: ${{ steps.version.outputs.deb }}
+        run: >
+          dput -c /etc/meshtastic-dput.cf
+          ssh-${up_ppa_repo}
+          meshtasticd_${up_version}~${up_series}_source.changes

.github/workflows/pr_enforce_labels.yml

@@ -13,7 +13,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Check for PR labels
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
         with:
           script: |
             const labels = context.payload.pull_request.labels.map(label => label.name);

.github/workflows/pr_tests.yml

@@ -177,7 +177,7 @@ jobs:
 
       - name: Comment test results on PR
         if: github.event_name == 'pull_request' && needs.native-tests.result != 'skipped'
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
         with:
           script: |
             const fs = require('fs');

.github/workflows/test_native.yml

@@ -136,7 +136,7 @@ jobs:
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.6.0
+        uses: dorny/test-reporter@v3.0.0
         with:
           name: PlatformIO Tests
           path: testreport.xml

.github/workflows/tests.yml

@@ -52,7 +52,7 @@ jobs:
           node-version: 24
 
       - name: Setup pnpm
-        uses: pnpm/action-setup@v5
+        uses: pnpm/action-setup@v6
         with:
           version: latest
 

.trunk/trunk.yaml

@@ -8,27 +8,27 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.510
-    - renovate@43.84.0
+    - checkov@3.2.517
+    - renovate@43.110.9
     - prettier@3.8.1
-    - trufflehog@3.93.8
+    - trufflehog@3.94.3
     - yamllint@1.38.0
     - bandit@1.9.4
     - trivy@0.69.3
     - taplo@0.10.0
-    - ruff@0.15.7
+    - ruff@0.15.9
     - isort@8.0.1
     - markdownlint@0.48.0
     - oxipng@10.1.0
     - svgo@4.0.1
-    - actionlint@1.7.11
+    - actionlint@1.7.12
     - flake8@7.3.0
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
     - black@26.3.1
     - git-diff-check
-    - gitleaks@8.30.0
+    - gitleaks@8.30.1
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

Dockerfile

@@ -12,7 +12,7 @@ ENV TZ=Etc/UTC
 ENV PIP_ROOT_USER_ACTION=ignore
 RUN apt-get update && apt-get install --no-install-recommends -y \
         curl wget g++ zip git ca-certificates pkg-config \
-        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
+        libgpiod-dev libyaml-cpp-dev libjsoncpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
         libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
         libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev libsdl2-dev \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
@@ -51,7 +51,7 @@ ENV TZ=Etc/UTC
 USER root
 
 RUN apt-get update && apt-get --no-install-recommends -y install \
-        libc-bin libc6 libgpiod3 libyaml-cpp0.8 libi2c0 libuv1t64 libusb-1.0-0-dev \
+        libc-bin libc6 libgpiod3 libyaml-cpp0.8 libjsoncpp26 libi2c0 libuv1t64 libusb-1.0-0-dev \
         liborcania2.3 libulfius2.7t64 libssl3t64 \
         libx11-6 libinput10 libxkbcommon-x11-0 libsdl2-2.0-0 \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \

Dockerfile.test

@@ -7,7 +7,7 @@ ENV PIP_ROOT_USER_ACTION=ignore
 # hadolint ignore=DL3008
 RUN apt-get update && apt-get install --no-install-recommends -y \
         g++ git ca-certificates pkg-config \
-        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
+        libgpiod-dev libyaml-cpp-dev libjsoncpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
         libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
         libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev libsdl2-dev \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \

alpine.Dockerfile

@@ -9,7 +9,7 @@ ENV PIP_ROOT_USER_ACTION=ignore
 
 RUN apk --no-cache add \
         bash g++ libstdc++-dev linux-headers zip git ca-certificates libbsd-dev \
-        libgpiod-dev yaml-cpp-dev bluez-dev \
+        libgpiod-dev yaml-cpp-dev jsoncpp-dev bluez-dev \
         libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
         libx11-dev libinput-dev libxkbcommon-dev sqlite-dev sdl2-dev \
     && rm -rf /var/cache/apk/* \
@@ -41,7 +41,7 @@ LABEL org.opencontainers.image.title="Meshtastic" \
 USER root
 
 RUN apk --no-cache add \
-        shadow libstdc++ libbsd libgpiod yaml-cpp libusb \
+        shadow libstdc++ libbsd libgpiod yaml-cpp jsoncpp libusb \
         i2c-tools libuv libx11 libinput libxkbcommon sdl2 \
     && rm -rf /var/cache/apk/* \
     && mkdir -p /var/lib/meshtasticd \

bin/config.d/OpenWRT/BananaPi-BPI-R4-sx1262.yaml

@@ -1,3 +1,9 @@
+Meta:
+  name: BananaPi-BPI-R4-sx1262
+  support: community
+  compatible:
+    - bananapi_bpi-r4 # OpenWrt target
+
 Lora:
   Module: sx1262  # BananaPi-BPI-R4 SPI via 26p GPIO Header
 ##  CS: 28

bin/config.d/OpenWRT/OpenWRT-One-mikroBUS-LR-IOT-CLICK.yaml

@@ -1,4 +1,10 @@
 ##  https://www.mikroe.com/lr-iot-click
+Meta:
+  name: OpenWRT One mikroBUS LR-IOT-CLICK
+  support: community
+  compatible:
+    - openwrt_one # OpenWrt target
+
 Lora:
   Module: lr1110  # OpenWRT ONE mikroBUS with LR-IOT-CLICK
 #  CS: 25

bin/config.d/OpenWRT/OpenWRT_One_mikroBUS_sx1262.yaml

@@ -1,3 +1,9 @@
+Meta:
+  name: OpenWRT One mikroBUS sx1262
+  support: community
+  compatible:
+    - openwrt_one # OpenWrt target
+
 Lora:
   Module: sx1262
   IRQ: 10

bin/config.d/README.md

@@ -0,0 +1,28 @@
+# meshtasticd configuration files
+
+This directory contains YAML configuration files for meshtasticd. Each file describes a specific hardware configuration, including the LoRa module and pin assignments. These configurations are used by meshtasticd to correctly interface with the hardware.
+
+## Metadata structure
+
+Each configuration file includes a `Meta` section that provides information about the configuration.
+This configuration is consumed by configuration-selection tools.
+
+```yaml
+Meta:
+  name: MeshAdv-Pi E22-900M30S # A unique identifier for this configuration.
+  support: community # community, official, or deprecated; determined by Meshtastic Leads.
+  compatible: # A list of compatible products or platforms.
+    - raspberry-pi
+```
+`name`: A unique identifier for the configuration, typically reflecting the hardware it supports.
+
+`support`: Indicates the level of support for this configuration. It can be one of the following:
+
+- `community`: Supported by the Meshtastic community. Meshtastic Members may not possess, or have not tested this configuration.
+- `official`: Fully supported by Meshtastic. Meshtastic Members have tested and verified this configuration.
+- `deprecated`: No longer recommended for deployment by Meshtastic.
+
+`compatible`: A list of compatible products or platforms that can use this configuration.
+This will vary depending on the intended use case / platform.
+Multiple compatible entries can be included. E.g. Armbian `BOARD` value or OpenWrt `TARGET` value.
+These tags can be consumed by different configuration-selection tools, filtering based upon their platform/etc.

bin/config.d/display-waveshare-1-44.yaml

@@ -1,3 +1,9 @@
+Meta:
+  name: Waveshare 1.44inch LCD HAT
+  support: community
+  compatible:
+    - raspberry-pi
+
 ### Waveshare 1.44inch LCD HAT
 Display:
   Panel: ST7735S

bin/config.d/display-waveshare-2.8.yaml

@@ -1,3 +1,9 @@
+Meta:
+  name: Waveshare 2.8inch LCD HAT
+  support: community
+  compatible:
+    - raspberry-pi
+
 Display:
 
 ### Waveshare 2.8inch RPi LCD

bin/config.d/femtofox/femtofox_E80-900M2213S.yaml

@@ -0,0 +1,30 @@
+---
+Lora:
+## Ebyte E80-900M22S
+## This is a bit experimental
+## 
+##
+  Module: lr1121
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO3_TCXO_VOLTAGE: 1.8
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+
+
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+rfswitch_table:
+  pins: [DIO5, DIO6, DIO7]
+  MODE_STBY: [LOW, LOW, LOW]
+  MODE_RX: [LOW, HIGH, LOW]
+  MODE_TX: [HIGH, HIGH, LOW]
+  MODE_TX_HP: [HIGH, LOW, LOW]
+  MODE_TX_HF: [LOW, LOW, LOW]
+  MODE_GNSS: [LOW, LOW, HIGH]
+  MODE_WIFI: [LOW, LOW, LOW]
+
+General:
+  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_LR1121 generic.yaml

@@ -0,0 +1,46 @@
+---
+Lora:
+## Ebyte E80-900M22S
+## This is a bit experimental
+## 
+##
+  Module: lr1121
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO3_TCXO_VOLTAGE: 1.8
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+
+
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+rfswitch_table:
+  pins:
+    - DIO5
+    - DIO6
+  MODE_STBY:
+    - LOW
+    - LOW
+  MODE_RX:
+    - HIGH
+    - LOW
+  MODE_TX:
+    - HIGH
+    - HIGH
+  MODE_TX_HP:
+    - LOW
+    - HIGH
+  MODE_TX_HF:
+    - LOW
+    - LOW
+  MODE_GNSS:
+    - LOW
+    - LOW
+  MODE_WIFI:
+    - LOW
+    - LOW
+
+General:
+  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_WIO-LR1121.yaml

@@ -0,0 +1,30 @@
+---
+Lora:
+## Ebyte E80-900M22S
+## This is a bit experimental
+## 
+##
+  Module: lr1121
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO3_TCXO_VOLTAGE: 1.8
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+
+
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+rfswitch_table:
+  pins: [DIO5, DIO6, DIO7]
+  MODE_STBY: [LOW, LOW, LOW]
+  MODE_RX: [LOW, LOW, LOW]
+  MODE_TX: [LOW, HIGH, LOW]
+  MODE_TX_HP: [HIGH, LOW, LOW]
+  # MODE_TX_HF: []
+  # MODE_GNSS: []
+  MODE_WIFI: [LOW, LOW, LOW]
+
+General:
+  MACAddressSource: eth0

bin/config.d/lora-Adafruit-RFM9x.yaml

@@ -1,3 +1,9 @@
+Meta:
+  name: Adafruit RFM9x
+  support: deprecated
+  compatible:
+    - raspberry-pi
+
 Lora:
   Module: RF95  # Adafruit RFM9x
   Reset: 25

bin/config.d/lora-MeshAdv-900M30S.yaml

@@ -1,5 +1,11 @@
 # MeshAdv-Pi E22-900M30S
 # https://github.com/chrismyers2000/MeshAdv-Pi-Hat
+Meta:
+  name: MeshAdv-Pi E22-900M30S
+  support: community
+  compatible:
+    - raspberry-pi
+
 Lora:
   Module: sx1262
   CS: 21

bin/config.d/lora-MeshAdv-Mini-900M22S.yaml

@@ -1,5 +1,11 @@
 # MeshAdv Mini E22-900M22S
 # https://github.com/chrismyers2000/MeshAdv-Mini
+Meta:
+  name: MeshAdv Mini E22-900M22S
+  support: community
+  compatible:
+    - raspberry-pi
+
 Lora:
   Module: sx1262  # Ebyte E22-900M22S 
   CS: 8

bin/config.d/lora-RAK6421-13300-slot1.yaml

@@ -1,6 +1,12 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 1
+  support: official
+  compatible:
+    - raspberry-pi
+
 Lora:
 
-  ### RAK13300in Slot 1
+  ### RAK13300 in Slot 1
   Module: sx1262
   IRQ: 22 #IO6
   Reset: 16 # IO4

bin/config.d/lora-RAK6421-13300-slot2.yaml

@@ -1,5 +1,11 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 2
+  support: official
+  compatible:
+    - raspberry-pi
+
 Lora:
-  ### RAK13300in Slot 2 pins
+  ### RAK13300 in Slot 2 pins
   IRQ: 18 #IO6
   Reset: 24 # IO4
   Busy: 19 # IO5

bin/config.d/lora-RAK6421-13302-slot1.yaml

@@ -1,6 +1,12 @@
+Meta:
+  name: RAK6421 + RAK13302 Slot 1
+  support: official
+  compatible:
+    - raspberry-pi
+
 Lora:
 
-  ### RAK13300in Slot 1
+  ### RAK13302 in Slot 1
   Module: sx1262
   IRQ: 22 #IO6
   Reset: 16 # IO4

bin/config.d/lora-RAK6421-13302-slot2.yaml

@@ -1,5 +1,11 @@
+Meta:
+  name: RAK6421 + RAK13302 Slot 2
+  support: official
+  compatible:
+    - raspberry-pi
+
 Lora:
-  ### RAK13300in Slot 2 pins
+  ### RAK13302 in Slot 2 pins
   IRQ: 18 #IO6
   Reset: 24 # IO4
   Busy: 19 # IO5

bin/config.d/lora-ecb41-pge-MeshAdv-900M30S.yaml

@@ -0,0 +1,39 @@
+# MeshAdv-Pi E22-900M30S
+# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
+Meta:
+  name: MeshAdv-Pi E22-900M30S
+  support: community
+  compatible:
+    - ebyte-ecb41-pge # Armbian
+
+Lora:
+  Module: sx1262
+  CS: # GPIO0_A1 (physical 40)
+    pin: 1
+    gpiochip: 0
+    line: 1
+  IRQ: # GPIO0_A3 (physical 36)
+    pin: 3
+    gpiochip: 0
+    line: 3
+  Busy: # GPIO0_A0 (physical 38)
+    pin: 0
+    gpiochip: 0
+    line: 0
+  Reset: # GPIO0_B4 (physical 12)
+    pin: 12
+    gpiochip: 0
+    line: 12
+  TXen: # GPIO1_D1 (physical 33)
+    pin: 57
+    gpiochip: 1
+    line: 25
+  RXen: # GPIO1_B3 (physical 32)
+    pin: 43
+    gpiochip: 1
+    line: 11
+  DIO3_TCXO_VOLTAGE: true
+  # Only for E22-900M33S:
+  # Limit the output power to 8 dBm
+  # SX126X_MAX_POWER: 8
+  spidev: spidev0.0

bin/config.d/lora-ecb41-pge-MeshAdv-Mini-900M22S.yaml

@@ -0,0 +1,33 @@
+# MeshAdv Mini E22-900M22S
+# https://github.com/chrismyers2000/MeshAdv-Mini
+Meta:
+  name: MeshAdv Mini E22-900M22S
+  support: community
+  compatible:
+    - ebyte-ecb41-pge # Armbian
+
+Lora:
+  Module: sx1262 # Ebyte E22-900M22S
+  CS: # GPIO0_B6 (physical 24, SPI1_CSN0)
+    pin: 14
+    gpiochip: 0
+    line: 14
+  IRQ: # GPIO0_A3 (physical 36)
+    pin: 3
+    gpiochip: 0
+    line: 3
+  Busy: # GPIO0_A0 (physical 38)
+    pin: 0
+    gpiochip: 0
+    line: 0
+  Reset: # GPIO1_C3 (physical 18)
+    pin: 51
+    gpiochip: 1
+    line: 19
+  RXen: # GPIO1_B3 (physical 32)
+    pin: 43
+    gpiochip: 1
+    line: 11
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  spidev: spidev0.0

bin/config.d/lora-ecb41-pge-RAK6421-13300-slot1.yaml

@@ -0,0 +1,38 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 1
+  support: community # Promote when tested
+  compatible:
+    - ebyte-ecb41-pge # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO0_A5 (IO6, physical 15)
+    pin: 5
+    gpiochip: 0
+    line: 5
+  Reset: # GPIO0_A3 (IO4, physical 36)
+    pin: 3
+    gpiochip: 0
+    line: 3
+  Busy: # GPIO1_C3 (IO5, physical 18)
+    pin: 51
+    gpiochip: 1
+    line: 19
+  # Ant_sw: # GPIO1_C2 (IO3, physical 16)
+  #   pin: 50
+  #   gpiochip: 1
+  #   line: 18
+  Enable_Pins:
+    - pin: 43 # GPIO1_B3 (physical 32)
+      gpiochip: 1
+      line: 11
+    - pin: 57 # GPIO1_D1 (physical 33)
+      gpiochip: 1
+      line: 25
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
+  spidev: spidev0.0
+  # CS: # GPIO0_B6 (SPI1_CSN0, physical 24)
+  #   pin: 14
+  #   gpiochip: 0
+  #   line: 14

bin/config.d/lora-ecb41-pge-RAK6421-13300-slot2.yaml

@@ -0,0 +1,36 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 2
+  support: community # Promote when tested
+  compatible:
+    - ebyte-ecb41-pge # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO0_B4 (IO6, physical 12)
+    pin: 12
+    gpiochip: 0
+    line: 12
+  Reset: # GPIO1_C3 (IO4, physical 18)
+    pin: 51
+    gpiochip: 1
+    line: 19
+  Busy: # GPIO0_B3 (IO5, physical 35)
+    pin: 11
+    gpiochip: 0
+    line: 11
+  # Ant_sw: # GPIO1_C2 (IO3, physical 16)
+  #   pin: 50
+  #   gpiochip: 1
+  #   line: 18
+  Enable_Pins:
+    - pin: 2 # GPIO0_A2 (physical 37)
+      gpiochip: 0
+      line: 2
+    - pin: 50 # GPIO1_C2 (physical 16)
+      gpiochip: 1
+      line: 18
+  spidev: spidev0.1
+  # CS: # GPIO0_A7 (SPI1_CSN1, physical 26)
+  #   pin: 7
+  #   gpiochip: 0
+  #   line: 7

bin/config.d/lora-ecb41-pge-RAK6421-13302-slot1.yaml

@@ -0,0 +1,39 @@
+Meta:
+  name: RAK6421 + RAK13302 Slot 1
+  support: community # Promote when tested
+  compatible:
+    - ebyte-ecb41-pge # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO0_A5 (IO6, physical 15)
+    pin: 5
+    gpiochip: 0
+    line: 5
+  Reset: # GPIO0_A3 (IO4, physical 36)
+    pin: 3
+    gpiochip: 0
+    line: 3
+  Busy: # GPIO1_C3 (IO5, physical 18)
+    pin: 51
+    gpiochip: 1
+    line: 19
+  # Ant_sw: # GPIO1_C2 (IO3, physical 16)
+  #   pin: 50
+  #   gpiochip: 1
+  #   line: 18
+  Enable_Pins:
+    - pin: 43 # GPIO1_B3 (physical 32)
+      gpiochip: 1
+      line: 11
+    - pin: 57 # GPIO1_D1 (physical 33)
+      gpiochip: 1
+      line: 25
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
+  spidev: spidev0.0
+  # CS: # GPIO0_B6 (SPI1_CSN0, physical 24)
+  #   pin: 14
+  #   gpiochip: 0
+  #   line: 14
+  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-ecb41-pge-RAK6421-13302-slot2.yaml

@@ -0,0 +1,37 @@
+Meta:
+  name: RAK6421 + RAK13302 Slot 2
+  support: community # Promote when tested
+  compatible:
+    - ebyte-ecb41-pge # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO0_B4 (IO6, physical 12)
+    pin: 12
+    gpiochip: 0
+    line: 12
+  Reset: # GPIO1_C3 (IO4, physical 18)
+    pin: 51
+    gpiochip: 1
+    line: 19
+  Busy: # GPIO0_B3 (IO5, physical 35)
+    pin: 11
+    gpiochip: 0
+    line: 11
+  # Ant_sw: # GPIO1_C2 (IO3, physical 16)
+  #   pin: 50
+  #   gpiochip: 1
+  #   line: 18
+  Enable_Pins:
+    - pin: 2 # GPIO0_A2 (physical 37)
+      gpiochip: 0
+      line: 2
+    - pin: 50 # GPIO1_C2 (physical 16)
+      gpiochip: 1
+      line: 18
+  spidev: spidev0.1
+  # CS: # GPIO0_A7 (SPI1_CSN1, physical 26)
+  #   pin: 7
+  #   gpiochip: 0
+  #   line: 7
+  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-ecb41-pge-waveshare-sxxx.yaml

@@ -0,0 +1,30 @@
+Meta:
+  name: Waveshare SX1262
+  support: deprecated
+  compatible:
+    - ebyte-ecb41-pge # Armbian
+
+Lora:
+  Module: sx1262  # Waveshare SX126X XXXM
+  DIO2_AS_RF_SWITCH: true
+  CS: # GPIO0_A1 (physical 40)
+    pin: 1
+    gpiochip: 0
+    line: 1
+  IRQ: # GPIO0_A3 (physical 36)
+    pin: 3
+    gpiochip: 0
+    line: 3
+  Busy: # GPIO0_A0 (physical 38)
+    pin: 0
+    gpiochip: 0
+    line: 0
+  Reset: # GPIO0_B4 (physical 12)
+    pin: 12
+    gpiochip: 0
+    line: 12
+  SX126X_ANT_SW: # GPIO1_B2 (physical 31)
+    pin: 42
+    gpiochip: 1
+    line: 10
+  spidev: spidev0.0

bin/config.d/lora-femtofox_LR1121_TCXO.yaml

@@ -1,20 +1,22 @@
----
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-General:
-  MACAddressSource: eth0
+---
+Meta:
+  name: Femtofox Ebyte E80-900M22S with TCXO
+  support: community
+  compatible:
+    - luckfox-pico-mini # Armbian
+
+Lora:
+## Ebyte E80-900M22S
+## This is a bit experimental
+## 
+##
+  Module: lr1121
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO3_TCXO_VOLTAGE: 1.8
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000

bin/config.d/lora-femtofox_SX1262_TCXO.yaml

@@ -1,21 +1,24 @@
----
-Lora:
-## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
-## HT-RA62 (Has internal switching, but whatever)
-## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
-## Will work with any module with or without RF switching, and with TCXO
-  Module: sx1262
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-General:
-  MACAddressSource: eth0
+---
+Meta:
+  name: Femtofox SX1262 TCXO
+  support: community
+  compatible:
+    - luckfox-pico-mini # Armbian
+
+Lora:
+## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
+## HT-RA62 (Has internal switching, but whatever)
+## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
+## Will work with any module with or without RF switching, and with TCXO
+  Module: sx1262
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+#  TXen: bridge to DIO2 on E22 module
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000

bin/config.d/lora-femtofox_SX1262_XTAL.yaml

@@ -1,21 +1,24 @@
----
-Lora:
-## Ebyte E22-900MM22S with no external RF switching setup
-## Waveshare SX126X XXXM, AI Thinker RA-01SH
-## Will work with any module with or without RF switching and no TCXO
-
-  Module: sx1262  
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: false
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1 
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-
-General:
-  MACAddressSource: eth0
+---
+Meta:
+  name: Femtofox SX1262 XTAL
+  support: community
+  compatible:
+    - luckfox-pico-mini # Armbian
+
+Lora:
+## Ebyte E22-900MM22S with no external RF switching setup
+## Waveshare SX126X XXXM, AI Thinker RA-01SH
+## Will work with any module with or without RF switching and no TCXO
+
+  Module: sx1262  
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: false
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1 
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+#  TXen: bridge to DIO2 on E22 module
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000

bin/config.d/lora-hat-rak-6421-pi-hat.yaml

@@ -1,6 +1,12 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 1 (Autoconf default)
+  support: official
+  compatible:
+    - raspberry-pi
+
 Lora:
 
-  ### RAK13300in Slot 1
+  ### RAK13300 in Slot 1
   Module: sx1262
   IRQ: 22 #IO6
   Reset: 16 # IO4

bin/config.d/lora-luckfox-pico-max-ws-raspberry-pi-pico-hat.yaml

@@ -0,0 +1,31 @@
+# For use with Armbian luckfox-pico-max
+# Waveshare LoRa HAT for Raspberry Pi Pico
+# https://www.waveshare.com/wiki/Pico-LoRa-SX1262
+
+Meta:
+  name: luckfox-pico-max-ws-raspberry-pi-pico-hat
+  support: community
+  compatible:
+    - luckfox-pico-max # Armbian
+
+Lora:
+  Module: sx1262
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  spidev: spidev0.0
+  Busy: # GPIO1_C7 / GP2
+    pin: 55
+    gpiochip: 1
+    line: 23
+  CS: # GPIO1_C6 / GP3
+    pin: 54
+    gpiochip: 1
+    line: 22
+  Reset: # GPIO1_D1 / GP15
+    pin: 57
+    gpiochip: 1
+    line: 25
+  IRQ: # GPIO2_A2 / GP20
+    pin: 66
+    gpiochip: 2
+    line: 2

bin/config.d/lora-lyra-picocalc-wio-sx1262.yaml

@@ -1,3 +1,9 @@
+Meta:
+  name: Luckfox Lyra PicoCalc Wio LoRa SX1262
+  support: official
+  compatible:
+    - luckfox-lyra-plus # Armbian
+
 Lora:
   Module: sx1262
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-lyra-ultra_1w.yaml

@@ -2,6 +2,13 @@
 # Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
 # https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
 # 1 Watt Lyra Ultra hat
+Meta:
+  name: wehooper4 Luckfox Ultra 1W
+  support: community
+  compatible:
+    - luckfox-pico-ultra # Armbian
+    - luckfox-lyra-ultra # Armbian
+
 Lora:
   Module: sx1262
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-lyra-ultra_2w.yaml

@@ -2,6 +2,13 @@
 # Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
 # https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
 # 2 Watt Lyra Ultra hat
+Meta:
+  name: wehooper4 Luckfox Ultra 2W
+  support: community
+  compatible:
+    - luckfox-pico-ultra # Armbian
+    - luckfox-lyra-ultra # Armbian
+
 Lora:
   Module: sx1262
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-lyra-ws-raspberry-pi-pico-hat.yaml

@@ -2,6 +2,12 @@
 # Enable overlay 'luckfox-lyra-plus-spi0-cs0_rmio13-spidev' with armbian-config
 # Waveshare LoRa HAT for Raspberry Pi Pico
 # https://www.waveshare.com/wiki/Pico-LoRa-SX1262
+Meta:
+  name: Waveshare LoRa HAT for Raspberry Pi Pico
+  support: community
+  compatible:
+    - luckfox-lyra-plus # Armbian
+
 Lora:
   Module: sx1262
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-lyra-zero-MeshAdv-900M30S.yaml

@@ -0,0 +1,39 @@
+# MeshAdv-Pi E22-900M30S
+# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
+Meta:
+  name: MeshAdv-Pi E22-900M30S
+  support: community
+  compatible:
+    - luckfox-lyra-zero-w # Armbian
+
+Lora:
+  Module: sx1262
+  CS: # GPIO0_C2 (physical 40)
+    pin: 18
+    gpiochip: 0
+    line: 18
+  IRQ: # GPIO1_D1 (physical 36)
+    pin: 57
+    gpiochip: 1
+    line: 25
+  Busy: # GPIO0_C1 (physical 38)
+    pin: 17
+    gpiochip: 0
+    line: 17
+  Reset: # GPIO0_B6 (physical 12)
+    pin: 14
+    gpiochip: 0
+    line: 14
+  TXen: # GPIO1_C2 (physical 33)
+    pin: 50
+    gpiochip: 1
+    line: 18
+  RXen: # GPIO1_D2 (physical 32)
+    pin: 58
+    gpiochip: 1
+    line: 26
+  DIO3_TCXO_VOLTAGE: true
+  # Only for E22-900M33S:
+  # Limit the output power to 8 dBm
+  # SX126X_MAX_POWER: 8
+  spidev: spidev0.0

bin/config.d/lora-lyra-zero-MeshAdv-Mini-900M22S.yaml

@@ -0,0 +1,33 @@
+# MeshAdv Mini E22-900M22S
+# https://github.com/chrismyers2000/MeshAdv-Mini
+Meta:
+  name: MeshAdv Mini E22-900M22S
+  support: community
+  compatible:
+    - luckfox-lyra-zero-w # Armbian
+
+Lora:
+  Module: sx1262 # Ebyte E22-900M22S
+  CS: # GPIO0_B2_d (phys 24, RPi CE0)
+    pin: 10
+    gpiochip: 0
+    line: 10
+  IRQ: # GPIO1_D1_d (phys 36, RPi GPIO16)
+    pin: 57
+    gpiochip: 1
+    line: 25
+  Busy: # GPIO0_C1_d (phys 38, RPi GPIO20)
+    pin: 17
+    gpiochip: 0
+    line: 17
+  Reset: # GPIO0_B4_d (phys 18, RPi GPIO24)
+    pin: 12
+    gpiochip: 0
+    line: 12
+  RXen: # GPIO1_D2_d (phys 32, RPi GPIO12)
+    pin: 58
+    gpiochip: 1
+    line: 26
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  spidev: spidev0.0

bin/config.d/lora-lyra-zero-RAK6421-13300-slot1.yaml

@@ -0,0 +1,38 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 1
+  support: community # Promote when tested
+  compatible:
+    - luckfox-lyra-zero-w # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO0_A5 (IO6)
+    pin: 5
+    gpiochip: 0
+    line: 5
+  Reset: # GPIO1_D1 (IO4)
+    pin: 57
+    gpiochip: 1
+    line: 25
+  Busy: # GPIO0_B4 (IO5)
+    pin: 12
+    gpiochip: 0
+    line: 12
+  # Ant_sw: # GPIO1_C2 (IO3)
+  #   pin: 50
+  #   gpiochip: 1
+  #   line: 18
+  Enable_Pins:
+    - pin: 58 # GPIO1_D2
+      gpiochip: 1
+      line: 26
+    - pin: 50 # GPIO1_C2
+      gpiochip: 1
+      line: 18
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
+  spidev: spidev0.0
+  # CS: # GPIO0_B2
+  #   pin: 10
+  #   gpiochip: 0
+  #   line: 10

bin/config.d/lora-lyra-zero-RAK6421-13300-slot2.yaml

@@ -0,0 +1,36 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 2
+  support: community # Promote when tested
+  compatible:
+    - luckfox-lyra-zero-w # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO0_B6 (IO6)
+    pin: 14
+    gpiochip: 0
+    line: 14
+  Reset: # GPIO0_B4 (IO4)
+    pin: 12
+    gpiochip: 0
+    line: 12
+  Busy: # GPIO1_C0 (IO5)
+    pin: 48
+    gpiochip: 1
+    line: 16
+  # Ant_sw: # GPIO0_B5 (IO3)
+  #   pin: 13
+  #   gpiochip: 0
+  #   line: 13
+  Enable_Pins:
+    - pin: 51 # GPIO1_C3
+      gpiochip: 1
+      line: 19
+    - pin: 13 # GPIO0_B5
+      gpiochip: 0
+      line: 13
+  spidev: spidev0.1
+  # CS: # GPIO0_B1
+  #   pin: 9
+  #   gpiochip: 0
+  #   line: 9

bin/config.d/lora-lyra-zero-RAK6421-13302-slot1.yaml

@@ -0,0 +1,39 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 1
+  support: community # Promote when tested
+  compatible:
+    - luckfox-lyra-zero-w # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO0_A5 (IO6)
+    pin: 5
+    gpiochip: 0
+    line: 5
+  Reset: # GPIO1_D1 (IO4)
+    pin: 57
+    gpiochip: 1
+    line: 25
+  Busy: # GPIO0_B4 (IO5)
+    pin: 12
+    gpiochip: 0
+    line: 12
+  # Ant_sw: # GPIO1_C2 (IO3)
+  #   pin: 50
+  #   gpiochip: 1
+  #   line: 18
+  Enable_Pins:
+    - pin: 58 # GPIO1_D2
+      gpiochip: 1
+      line: 26
+    - pin: 50 # GPIO1_C2
+      gpiochip: 1
+      line: 18
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
+  spidev: spidev0.0
+  # CS: # GPIO0_B2
+  #   pin: 10
+  #   gpiochip: 0
+  #   line: 10
+  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-lyra-zero-RAK6421-13302-slot2.yaml

@@ -0,0 +1,37 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 2
+  support: community # Promote when tested
+  compatible:
+    - luckfox-lyra-zero-w # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO0_B6 (IO6)
+    pin: 14
+    gpiochip: 0
+    line: 14
+  Reset: # GPIO0_B4 (IO4)
+    pin: 12
+    gpiochip: 0
+    line: 12
+  Busy: # GPIO1_C0 (IO5)
+    pin: 48
+    gpiochip: 1
+    line: 16
+  # Ant_sw: # GPIO0_B5 (IO3)
+  #   pin: 13
+  #   gpiochip: 0
+  #   line: 13
+  Enable_Pins:
+    - pin: 51 # GPIO1_C3
+      gpiochip: 1
+      line: 19
+    - pin: 13 # GPIO0_B5
+      gpiochip: 0
+      line: 13
+  spidev: spidev0.1
+  # CS: # GPIO0_B1
+  #   pin: 9
+  #   gpiochip: 0
+  #   line: 9
+  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-lyra-zero-waveshare-sxxx.yaml

@@ -0,0 +1,30 @@
+Meta:
+  name: Waveshare SX1262
+  support: deprecated
+  compatible:
+    - luckfox-lyra-zero-w # Armbian
+
+Lora:
+  Module: sx1262  # Waveshare SX126X XXXM
+  DIO2_AS_RF_SWITCH: true
+  CS: # GPIO0_C2 (physical 40)
+    pin: 18
+    gpiochip: 0
+    line: 18
+  IRQ: # GPIO1_D1 (physical 36)
+    pin: 57
+    gpiochip: 1
+    line: 25
+  Busy: # GPIO0_C1 (physical 38)
+    pin: 17
+    gpiochip: 0
+    line: 17
+  Reset: # GPIO0_B6 (physical 12)
+    pin: 14
+    gpiochip: 0
+    line: 14
+  SX126X_ANT_SW: # GPIO1_B3 (physical 31)
+    pin: 43
+    gpiochip: 1
+    line: 11
+  spidev: spidev0.0

bin/config.d/lora-meshstick-1262.yaml

@@ -1,3 +1,9 @@
+Meta:
+  name: Lora Meshstick SX1262
+  support: official
+  compatible:
+    - usb
+
 Lora:
   Module: sx1262
   CS: 0

bin/config.d/lora-ok3506-MeshAdv-900M30S.yaml

@@ -0,0 +1,41 @@
+# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
+
+# MeshAdv-Pi E22-900M30S
+# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
+Meta:
+  name: MeshAdv-Pi E22-900M30S
+  support: community
+  compatible:
+    - forlinx-ok3506-s12 # Armbian
+
+Lora:
+  Module: sx1262
+  CS: # GPIO0_B0 (physical 40)
+    pin: 8
+    gpiochip: 0
+    line: 8
+  IRQ: # GPIO3_B0 (physical 36)
+    pin: 104
+    gpiochip: 3
+    line: 8
+  Busy: # GPIO0_B1 (physical 38)
+    pin: 9
+    gpiochip: 0
+    line: 9
+  Reset: # GPIO0_B6 (physical 12)
+    pin: 14
+    gpiochip: 0
+    line: 14
+  TXen: # GPIO0_A3 (physical 33)
+    pin: 3
+    gpiochip: 0
+    line: 3
+  RXen: # GPIO0_A2 (physical 32)
+    pin: 2
+    gpiochip: 0
+    line: 2
+  DIO3_TCXO_VOLTAGE: true
+  # Only for E22-900M33S:
+  # Limit the output power to 8 dBm
+  # SX126X_MAX_POWER: 8
+  spidev: spidev0.0

bin/config.d/lora-ok3506-MeshAdv-Mini-900M22S.yaml

@@ -0,0 +1,35 @@
+# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
+
+# MeshAdv Mini E22-900M22S
+# https://github.com/chrismyers2000/MeshAdv-Mini
+Meta:
+  name: MeshAdv Mini E22-900M22S
+  support: community
+  compatible:
+    - forlinx-ok3506-s12 # Armbian
+
+Lora:
+  Module: sx1262 # Ebyte E22-900M22S
+  CS: # GPIO0_C3 (physical 24, SPI0_CSN0)
+    pin: 19
+    gpiochip: 0
+    line: 19
+  IRQ: # GPIO3_B0 (physical 36)
+    pin: 104
+    gpiochip: 3
+    line: 8
+  Busy: # GPIO0_B1 (physical 38)
+    pin: 9
+    gpiochip: 0
+    line: 9
+  Reset: # GPIO3_A6 (physical 18)
+    pin: 102
+    gpiochip: 3
+    line: 6
+  RXen: # GPIO0_A2 (physical 32)
+    pin: 2
+    gpiochip: 0
+    line: 2
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  spidev: spidev0.0

bin/config.d/lora-ok3506-RAK6421-13300-slot1.yaml

@@ -0,0 +1,40 @@
+# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
+
+Meta:
+  name: RAK6421 + RAK13300 Slot 1
+  support: community # Promote when tested
+  compatible:
+    - forlinx-ok3506-s12 # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO3_B5 (IO6, physical 15)
+    pin: 109
+    gpiochip: 3
+    line: 13
+  Reset: # GPIO3_B0 (IO4, physical 36)
+    pin: 104
+    gpiochip: 3
+    line: 8
+  Busy: # GPIO3_A6 (IO5, physical 18)
+    pin: 102
+    gpiochip: 3
+    line: 6
+  # Ant_sw: # GPIO0_A3 (IO3, physical 33)
+  #   pin: 3
+  #   gpiochip: 0
+  #   line: 3
+  Enable_Pins:
+    - pin: 2 # GPIO0_A2 (physical 32)
+      gpiochip: 0
+      line: 2
+    - pin: 3 # GPIO0_A3 (physical 33)
+      gpiochip: 0
+      line: 3
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
+  spidev: spidev0.0
+  # CS: # GPIO0_C3 (SPI0_CSN0, physical 24)
+  #   pin: 19
+  #   gpiochip: 0
+  #   line: 19

bin/config.d/lora-ok3506-RAK6421-13300-slot2.yaml

@@ -0,0 +1,38 @@
+# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
+
+Meta:
+  name: RAK6421 + RAK13300 Slot 2
+  support: community # Promote when tested
+  compatible:
+    - forlinx-ok3506-s12 # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO0_B6 (IO6, physical 12)
+    pin: 14
+    gpiochip: 0
+    line: 14
+  Reset: # GPIO3_A6 (IO4, physical 18)
+    pin: 102
+    gpiochip: 3
+    line: 6
+  Busy: # GPIO0_B2 (IO5, physical 35)
+    pin: 10
+    gpiochip: 0
+    line: 10
+  # Ant_sw: # GPIO3_A7 (IO3, physical 16)
+  #   pin: 103
+  #   gpiochip: 3
+  #   line: 7
+  Enable_Pins:
+    - pin: 106 # GPIO3_B2 (physical 37)
+      gpiochip: 3
+      line: 10
+    - pin: 103 # GPIO3_A7 (physical 16)
+      gpiochip: 3
+      line: 7
+  spidev: spidev0.1
+  # CS: # GPIO0_B7 (SPI0_CSN1, physical 26)
+  #   pin: 15
+  #   gpiochip: 0
+  #   line: 15

bin/config.d/lora-ok3506-RAK6421-13302-slot1.yaml

@@ -0,0 +1,41 @@
+# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
+
+Meta:
+  name: RAK6421 + RAK13302 Slot 1
+  support: community # Promote when tested
+  compatible:
+    - forlinx-ok3506-s12 # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO3_B5 (IO6, physical 15)
+    pin: 109
+    gpiochip: 3
+    line: 13
+  Reset: # GPIO3_B0 (IO4, physical 36)
+    pin: 104
+    gpiochip: 3
+    line: 8
+  Busy: # GPIO3_A6 (IO5, physical 18)
+    pin: 102
+    gpiochip: 3
+    line: 6
+  # Ant_sw: # GPIO0_A3 (IO3, physical 33)
+  #   pin: 3
+  #   gpiochip: 0
+  #   line: 3
+  Enable_Pins:
+    - pin: 2 # GPIO0_A2 (physical 32)
+      gpiochip: 0
+      line: 2
+    - pin: 3 # GPIO0_A3 (physical 33)
+      gpiochip: 0
+      line: 3
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
+  spidev: spidev0.0
+  # CS: # GPIO0_C3 (SPI0_CSN0, physical 24)
+  #   pin: 19
+  #   gpiochip: 0
+  #   line: 19
+  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-ok3506-RAK6421-13302-slot2.yaml

@@ -0,0 +1,39 @@
+# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
+
+Meta:
+  name: RAK6421 + RAK13302 Slot 2
+  support: community # Promote when tested
+  compatible:
+    - forlinx-ok3506-s12 # Armbian
+
+Lora:
+  Module: sx1262
+  IRQ: # GPIO0_B6 (IO6, physical 12)
+    pin: 14
+    gpiochip: 0
+    line: 14
+  Reset: # GPIO3_A6 (IO4, physical 18)
+    pin: 102
+    gpiochip: 3
+    line: 6
+  Busy: # GPIO0_B2 (IO5, physical 35)
+    pin: 10
+    gpiochip: 0
+    line: 10
+  # Ant_sw: # GPIO3_A7 (IO3, physical 16)
+  #   pin: 103
+  #   gpiochip: 3
+  #   line: 7
+  Enable_Pins:
+    - pin: 106 # GPIO3_B2 (physical 37)
+      gpiochip: 3
+      line: 10
+    - pin: 103 # GPIO3_A7 (physical 16)
+      gpiochip: 3
+      line: 7
+  spidev: spidev0.1
+  # CS: # GPIO0_B7 (SPI0_CSN1, physical 26)
+  #   pin: 15
+  #   gpiochip: 0
+  #   line: 15
+  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-ok3506-waveshare-sxxx.yaml

@@ -0,0 +1,32 @@
+# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
+
+Meta:
+  name: Waveshare SX1262
+  support: deprecated
+  compatible:
+    - forlinx-ok3506-s12 # Armbian
+
+Lora:
+  Module: sx1262  # Waveshare SX126X XXXM
+  DIO2_AS_RF_SWITCH: true
+  CS: # GPIO0_B0 (physical 40)
+    pin: 8
+    gpiochip: 0
+    line: 8
+  IRQ: # GPIO3_B0 (physical 36)
+    pin: 104
+    gpiochip: 3
+    line: 8
+  Busy: # GPIO0_B1 (physical 38)
+    pin: 9
+    gpiochip: 0
+    line: 9
+  Reset: # GPIO0_B6 (physical 12)
+    pin: 14
+    gpiochip: 0
+    line: 14
+  SX126X_ANT_SW: # GPIO3_B3 (physical 31)
+    pin: 107
+    gpiochip: 3
+    line: 11
+  spidev: spidev0.0

bin/config.d/lora-piggystick-lr1121.yaml

@@ -1,3 +1,9 @@
+Meta:
+  name: Lora Meshstick SX1262
+  support: community
+  compatible:
+    - usb
+
 Lora:
   Module: lr1121
   CS: 0

bin/config.d/lora-pinedio-usb-sx1262.yaml

@@ -1,5 +1,11 @@
+Meta:
+  name: Pinedio USB SX1262
+  support: deprecated
+  compatible:
+    - usb
+
 Lora:
   Module: sx1262
   CS: 0 
   IRQ: 10
-  spidev: ch341
+  spidev: ch341

bin/config.d/lora-raxda-rock2f-starter-edition-hat.yaml

@@ -1,3 +1,9 @@
+Meta:
+  name: raxda-rock2f-starter-edition-hat
+  support: community
+  compatible:
+    - rock-2f # Armbian
+
 Lora:
 
 ### Raxda Rock 2F running Armbian Linux 6.1.99-vendor-rk35xx

bin/config.d/lora-starter-edition-sx1262-i2c.yaml

@@ -1,5 +1,11 @@
 # https://www.waveshare.com/core1262-868m.htm
 # https://github.com/markbirss/lora-starter-edition-sx1262-i2c
+Meta:
+  name: lora-starter-edition-sx1262-i2c
+  support: community
+  compatible:
+    - raspberry-pi
+
 Lora:
   Module: sx1262  # Starter Edition SX1262 I2C Raspberry Pi HAT
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-usb-meshstick-1262.yaml

@@ -1,3 +1,9 @@
+Meta:
+  name: meshstick-1262
+  support: official
+  compatible:
+    - usb
+
 Lora:
   Module: sx1262
   CS: 0

bin/config.d/lora-usb-meshtoad-e22.yaml

@@ -1,3 +1,9 @@
+Meta:
+  name: meshtoad-e22
+  support: official
+  compatible:
+    - usb
+
 Lora:
   Module: sx1262
   CS: 0

bin/config.d/lora-usb-umesh-1262-30dbm.yaml

@@ -1,3 +1,9 @@
+Meta:
+  name: umesh-1262-30dbm
+  support: community
+  compatible:
+    - clockwork-uconsole
+
 Lora:
   Module: sx1262
   CS: 0

bin/config.d/lora-usb-umesh-1268-30dbm.yaml

@@ -1,3 +1,9 @@
+Meta:
+  name: umesh-1268-30dbm
+  support: community
+  compatible:
+    - clockwork-uconsole
+
 Lora:
   Module: sx1268
   CS: 0

bin/config.d/lora-waveshare-sxxx.yaml

@@ -1,3 +1,9 @@
+Meta:
+  name: Waveshare SX1262
+  support: deprecated
+  compatible:
+    - raspberry-pi
+
 Lora:
   Module: sx1262  # Waveshare SX126X XXXM
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-ws-raspberry-pi-pico-to-rpi-adapter.yaml

@@ -1,5 +1,12 @@
 # https://www.waveshare.com/pico-lora-sx1262-868m.htm
 # https://github.com/markbirss/lora-ws-raspberry-pi-pico-to-rpi-adapter
+
+Meta:
+  name: ws-raspberry-pico-to-rpi-adapter
+  support: community
+  compatible:
+    - raspberry-pi
+
 Lora:
   Module: sx1262  # Waveshare Raspberry Pi Pico to Raspberry Pi HAT Adapter
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-ws-raspberry-pico-to-orangepi-03.yaml

@@ -15,6 +15,12 @@
 #   5     CS          24
 #   26    DIO1/IRQ    26
 
+Meta:
+  name: ws-raspberry-pico-to-orangepi-03
+  support: community
+  compatible:
+    - orange-pi-zero-3 # Armbian
+
 Lora:
   Module: sx1262  # Waveshare Raspberry Pico Lora module
   DIO2_AS_RF_SWITCH: true

bin/generate_ci_matrix.py

@@ -43,7 +43,7 @@ for pio_env in pio_envs:
   env = {
     "ci": {"board": pio_env, "platform": env_platform},
     "board_level": cfg.get(f"env:{pio_env}", "board_level", default=None),
-    "board_check": bool(cfg.get(f"env:{pio_env}", "board_check", default=False)),
+    "board_check": cfg.get(f"env:{pio_env}", "board_check", default="false").strip().lower() == "true",
   }
   all_envs.append(env)
 

bin/generate_release_notes.py

@@ -1,25 +1,31 @@
 #!/usr/bin/env python3
-"""
-Generate release notes from merged PRs on develop and master branches.
-Categorizes PRs into Enhancements and Bug Fixes/Maintenance sections.
-"""
+"""Generate release notes from the actual release commit range."""
 
-import subprocess
-import re
+import argparse
 import json
+import re
+import subprocess
 import sys
-from datetime import datetime
 
 
-def get_last_release_tag():
-    """Get the most recent release tag."""
+def get_last_release_tag(compare_ref, exclude_tag=None):
+    """Get the most recent version tag merged into compare_ref."""
     result = subprocess.run(
-        ["git", "describe", "--tags", "--abbrev=0"],
+        ["git", "tag", "--merged", compare_ref, "--sort=-version:refname", "v*"],
         capture_output=True,
         text=True,
         check=True,
     )
-    return result.stdout.strip()
+
+    for line in result.stdout.splitlines():
+        candidate = line.strip()
+        if not candidate:
+            continue
+        if exclude_tag and candidate == exclude_tag:
+            continue
+        return candidate
+
+    raise subprocess.CalledProcessError(result.returncode, result.args, output=result.stdout, stderr=result.stderr)
 
 
 def get_tag_date(tag):
@@ -33,18 +39,18 @@ def get_tag_date(tag):
     return result.stdout.strip()
 
 
-def get_merged_prs_since_tag(tag, branch):
-    """Get all merged PRs since the given tag on the specified branch."""
-    # Get commits since tag on the branch - look for PR numbers in parentheses
+def get_merged_prs_in_range(tag, compare_ref):
+    """Get all merged PRs in the git range between tag and compare_ref."""
     result = subprocess.run(
         [
             "git",
             "log",
-            f"{tag}..origin/{branch}",
+            f"{tag}..{compare_ref}",
             "--oneline",
         ],
         capture_output=True,
         text=True,
+        check=True,
     )
 
     prs = []
@@ -65,6 +71,25 @@ def get_merged_prs_since_tag(tag, branch):
     return prs
 
 
+def parse_args():
+    """Parse CLI arguments."""
+    parser = argparse.ArgumentParser(
+        description="Generate release notes from the actual release commit range."
+    )
+    parser.add_argument("new_version", help="Version that will be tagged for this release")
+    parser.add_argument(
+        "--base-tag",
+        dest="base_tag",
+        help="Existing version tag to diff from. Defaults to the latest version tag merged into the compare ref.",
+    )
+    parser.add_argument(
+        "--compare-ref",
+        default="HEAD",
+        help="Git ref to diff to. Defaults to HEAD.",
+    )
+    return parser.parse_args()
+
+
 def get_pr_details(pr_number):
     """Get PR details from GitHub API via gh CLI."""
     try:
@@ -268,28 +293,28 @@ def get_new_contributors(pr_details_list, tag, repo="meshtastic/firmware"):
 
 
 def main():
-    if len(sys.argv) < 2:
-        print("Usage: generate_release_notes.py <new_version>", file=sys.stderr)
-        sys.exit(1)
-
-    new_version = sys.argv[1]
+    args = parse_args()
+    new_version = args.new_version
+    compare_ref = args.compare_ref
+    current_tag = f"v{new_version}"
 
     # Get last release tag
     try:
-        last_tag = get_last_release_tag()
+        last_tag = args.base_tag or get_last_release_tag(compare_ref, exclude_tag=current_tag)
     except subprocess.CalledProcessError:
         print("Error: Could not find last release tag", file=sys.stderr)
         sys.exit(1)
 
-    # Collect PRs from both branches
-    all_pr_numbers = set()
+    print(
+        f"Resolved release note range: {last_tag}..{compare_ref}",
+        file=sys.stderr,
+    )
 
-    for branch in ["develop", "master"]:
-        try:
-            prs = get_merged_prs_since_tag(last_tag, branch)
-            all_pr_numbers.update(prs)
-        except Exception as e:
-            print(f"Warning: Could not get PRs from {branch}: {e}", file=sys.stderr)
+    try:
+        all_pr_numbers = set(get_merged_prs_in_range(last_tag, compare_ref))
+    except subprocess.CalledProcessError as e:
+        print(f"Error: Could not get PRs for range {last_tag}..{compare_ref}: {e}", file=sys.stderr)
+        sys.exit(1)
 
     # Get details for all PRs
     enhancements = []

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,6 +87,12 @@
   </screenshots>
 
   <releases>
+    <release version="2.7.23" date="2026-04-14">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.23</url>
+    </release>
+    <release version="2.7.22" date="2026-04-06">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.22</url>
+    </release>
     <release version="2.7.21" date="2026-03-11">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.21</url>
     </release>

boards/t5-epaper-s3.json

@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi",
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "esp32s3"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "LilyGo T5-ePaper-S3",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://lilygo.cc/products/t5-e-paper-s3-pro",
+  "vendor": "LILYGO"
+}

boards/ttgo-tbeam.json

@@ -0,0 +1,29 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": "-DARDUINO_T_Beam",
+    "f_cpu": "240000000L",
+    "f_flash": "40000000L",
+    "flash_mode": "dio",
+    "mcu": "esp32",
+    "variant": "tbeam"
+  },
+  "connectivity": ["wifi", "bluetooth", "can", "ethernet"],
+  "debug": {
+    "openocd_board": "esp-wroom-32.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "TTGO T-Beam (PSRAM Disabled)",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 1310720,
+    "maximum_size": 4194304,
+    "require_upload_port": true,
+    "speed": 460800
+  },
+  "url": "https://github.com/LilyGO/TTGO-T-Beam",
+  "vendor": "TTGO"
+}

debian/changelog

@@ -1,3 +1,15 @@
+meshtasticd (2.7.23.0) unstable; urgency=medium
+
+  * Version 2.7.23
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Tue, 14 Apr 2026 12:29:48 +0000
+
+meshtasticd (2.7.22.0) unstable; urgency=medium
+
+  * Version 2.7.22
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Mon, 06 Apr 2026 11:34:12 +0000
+
 meshtasticd (2.7.21.0) unstable; urgency=medium
 
   * Version 2.7.21

debian/control

@@ -14,6 +14,7 @@ Build-Depends: debhelper-compat (= 13),
                g++,
                pkg-config,
                libyaml-cpp-dev,
+               libjsoncpp-dev,
                libgpiod-dev,
                libbluetooth-dev,
                libusb-1.0-0-dev,

meshtasticd.spec.rpkg

@@ -34,6 +34,7 @@ BuildRequires: python3dist(grpcio-tools)
 BuildRequires: git-core
 BuildRequires: gcc-c++
 BuildRequires: pkgconfig(yaml-cpp)
+BuildRequires: pkgconfig(jsoncpp)
 BuildRequires: pkgconfig(libgpiod)
 BuildRequires: pkgconfig(bluez)
 BuildRequires: pkgconfig(libusb-1.0)

platformio.ini

@@ -56,9 +56,7 @@ build_flags = -Wno-missing-field-initializers
 	-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
 	-DMESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE=1
 	-DMESHTASTIC_EXCLUDE_POWERMON=1
-	-DMESHTASTIC_EXCLUDE_STATUS=1
 	-D MAX_THREADS=40 ; As we've split modules, we have more threads to manage
-	-DLED_BUILTIN=-1
 	#-DBUILD_EPOCH=$UNIX_TIME ; set in platformio-custom.py now
 	#-D OLED_PL=1
 	#-D DEBUG_HEAP=1 ; uncomment to add free heap space / memory leak debugging logs
@@ -77,10 +75,10 @@ lib_deps =
 	https://github.com/meshtastic/TinyGPSPlus/archive/71a82db35f3b973440044c476d4bcdc673b104f4.zip
 	# renovate: datasource=git-refs depName=meshtastic-ArduinoThread packageName=https://github.com/meshtastic/ArduinoThread gitBranch=master
 	https://github.com/meshtastic/ArduinoThread/archive/b841b0415721f1341ea41cccfb4adccfaf951567.zip
-	# renovate: datasource=custom.pio depName=Nanopb packageName=nanopb/library/Nanopb
-	nanopb/Nanopb@0.4.91
-	# renovate: datasource=custom.pio depName=ErriezCRC32 packageName=erriez/library/ErriezCRC32
-	erriez/ErriezCRC32@1.0.1
+	# renovate: datasource=github-tags depName=Nanopb packageName=nanopb/nanopb
+	https://github.com/nanopb/nanopb/archive/refs/tags/nanopb-0.4.9.1.zip
+	# renovate: datasource=github-tags depName=ErriezCRC32 packageName=Erriez/ErriezCRC32
+	https://github.com/Erriez/ErriezCRC32/archive/refs/tags/1.0.1.zip
 
 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck
@@ -95,8 +93,8 @@ check_flags =
 framework = arduino
 lib_deps =
 	${env.lib_deps}
-	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=end2endzone/library/NonBlockingRTTTL
-	end2endzone/NonBlockingRTTTL@1.4.0
+	# renovate: datasource=github-tags depName=NonBlockingRTTTL packageName=end2endzone/NonBlockingRTTTL
+	https://github.com/end2endzone/NonBlockingRTTTL/archive/refs/tags/1.4.0.zip
 build_unflags =
 	-std=c++11
 	-std=gnu++11
@@ -107,131 +105,141 @@ build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/nic
 ; Common libs for communicating over TCP/IP networks such as MQTT
 [networking_base]
 lib_deps =
-	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
-	thingsboard/TBPubSubClient@2.12.1
-	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
-	arduino-libraries/NTPClient@3.2.1
+	# renovate: datasource=github-tags depName=TBPubSubClient packageName=thingsboard/pubsubclient
+	https://github.com/thingsboard/pubsubclient/archive/refs/tags/v2.12.1.zip
+	# renovate: datasource=github-tags depName=NTPClient packageName=arduino-libraries/NTPClient
+	https://github.com/arduino-libraries/NTPClient/archive/refs/tags/3.2.1.zip
 
 ; Extra TCP/IP networking libs for supported devices
 [networking_extra]
 lib_deps =
-	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
-	arcao/Syslog@2.0.0
+	# renovate: datasource=github-tags depName=Syslog packageName=arcao/Syslog
+	https://github.com/arcao/Syslog/archive/refs/tags/v2.0.zip
 
 [radiolib_base]
 lib_deps =
-	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	jgromes/RadioLib@7.6.0
+	# renovate: datasource=github-tags depName=RadioLib packageName=jgromes/RadioLib
+	https://github.com/jgromes/RadioLib/archive/refs/tags/7.6.0.zip
 
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/de2e490882105fc2778d761740d9a1711d1dab78.zip
+	https://github.com/meshtastic/device-ui/archive/5305670b68eb5b92d14e62b5b536969ca4bb441f.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
 lib_deps =
-	# renovate: datasource=custom.pio depName=Adafruit BusIO packageName=adafruit/library/Adafruit BusIO
-	adafruit/Adafruit BusIO@1.17.4
-	# renovate: datasource=custom.pio depName=Adafruit Unified Sensor packageName=adafruit/library/Adafruit Unified Sensor
-	adafruit/Adafruit Unified Sensor@1.1.15
-	# renovate: datasource=custom.pio depName=Adafruit BMP280 packageName=adafruit/library/Adafruit BMP280 Library
-	adafruit/Adafruit BMP280 Library@3.0.0
-	# renovate: datasource=custom.pio depName=Adafruit BMP085 packageName=adafruit/library/Adafruit BMP085 Library
-	adafruit/Adafruit BMP085 Library@1.2.4
-	# renovate: datasource=custom.pio depName=Adafruit BME280 packageName=adafruit/library/Adafruit BME280 Library
-	adafruit/Adafruit BME280 Library@2.3.0
-	# renovate: datasource=custom.pio depName=Adafruit DPS310 packageName=adafruit/library/Adafruit DPS310
-	adafruit/Adafruit DPS310@1.1.6
-	# renovate: datasource=custom.pio depName=Adafruit MCP9808 packageName=adafruit/library/Adafruit MCP9808 Library
-	adafruit/Adafruit MCP9808 Library@2.0.2
-	# renovate: datasource=custom.pio depName=Adafruit INA260 packageName=adafruit/library/Adafruit INA260 Library
-	adafruit/Adafruit INA260 Library@1.5.3
-	# renovate: datasource=custom.pio depName=Adafruit INA219 packageName=adafruit/library/Adafruit INA219
-	adafruit/Adafruit INA219@1.2.3
-	# renovate: datasource=custom.pio depName=Adafruit MPU6050 packageName=adafruit/library/Adafruit MPU6050
-	adafruit/Adafruit MPU6050@2.2.9
-	# renovate: datasource=custom.pio depName=Adafruit LIS3DH packageName=adafruit/library/Adafruit LIS3DH
-	adafruit/Adafruit LIS3DH@1.3.0
-	# renovate: datasource=custom.pio depName=Adafruit AHTX0 packageName=adafruit/library/Adafruit AHTX0
-	adafruit/Adafruit AHTX0@2.0.6
-	# renovate: datasource=custom.pio depName=Adafruit LSM6DS packageName=adafruit/library/Adafruit LSM6DS
-	adafruit/Adafruit LSM6DS@4.7.4
-	# renovate: datasource=custom.pio depName=Adafruit TSL2591 packageName=adafruit/library/Adafruit TSL2591 Library
-	adafruit/Adafruit TSL2591 Library@1.4.5
-	# renovate: datasource=custom.pio depName=EmotiBit MLX90632 packageName=emotibit/library/EmotiBit MLX90632
-	emotibit/EmotiBit MLX90632@1.0.8
-	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
-	adafruit/Adafruit MLX90614 Library@2.1.6
+	# renovate: datasource=github-tags depName=Adafruit BusIO packageName=adafruit/Adafruit_BusIO
+	https://github.com/adafruit/Adafruit_BusIO/archive/refs/tags/1.17.4.zip
+	# renovate: datasource=github-tags depName=Adafruit Unified Sensor packageName=adafruit/Adafruit_Sensor
+	https://github.com/adafruit/Adafruit_Sensor/archive/refs/tags/1.1.15.zip
+	# renovate: datasource=github-tags depName=Adafruit GFX packageName=adafruit/Adafruit-GFX-Library
+	https://github.com/adafruit/Adafruit-GFX-Library/archive/refs/tags/1.12.6.zip
+	# renovate: datasource=github-tags depName=NeoPixel packageName=adafruit/Adafruit_NeoPixel
+	https://github.com/adafruit/Adafruit_NeoPixel/archive/refs/tags/1.15.4.zip
+	# renovate: datasource=github-tags depName=Adafruit SSD1306 packageName=adafruit/Adafruit_SSD1306
+	https://github.com/adafruit/Adafruit_SSD1306/archive/refs/tags/2.5.16.zip
+	# renovate: datasource=github-tags depName=Adafruit BMP280 packageName=adafruit/Adafruit_BMP280_Library
+	https://github.com/adafruit/Adafruit_BMP280_Library/archive/refs/tags/3.0.0.zip
+	# renovate: datasource=github-tags depName=Adafruit BMP085 packageName=adafruit/Adafruit-BMP085-Library
+	https://github.com/adafruit/Adafruit-BMP085-Library/archive/refs/tags/1.2.4.zip
+	# renovate: datasource=github-tags depName=Adafruit BME280 packageName=adafruit/Adafruit_BME280_Library
+	https://github.com/adafruit/Adafruit_BME280_Library/archive/refs/tags/2.3.0.zip
+	# renovate: datasource=github-tags depName=Adafruit DPS310 packageName=adafruit/Adafruit_DPS310
+	https://github.com/adafruit/Adafruit_DPS310/archive/refs/tags/1.1.6.zip
+	# renovate: datasource=github-tags depName=Adafruit SH110x packageName=adafruit/Adafruit_SH110x
+	https://github.com/adafruit/Adafruit_SH110x/archive/refs/tags/2.1.14.zip
+	# renovate: datasource=github-tags depName=Adafruit MCP9808 packageName=adafruit/Adafruit_MCP9808_Library
+	https://github.com/adafruit/Adafruit_MCP9808_Library/archive/refs/tags/2.0.2.zip
+	# renovate: datasource=github-tags depName=Adafruit INA260 packageName=adafruit/Adafruit_INA260
+	https://github.com/adafruit/Adafruit_INA260/archive/refs/tags/1.5.3.zip
+	# renovate: datasource=github-tags depName=Adafruit INA219 packageName=adafruit/Adafruit_INA219
+	https://github.com/adafruit/Adafruit_INA219/archive/refs/tags/1.2.3.zip
+	# renovate: datasource=github-tags depName=Adafruit MPU6050 packageName=adafruit/Adafruit_MPU6050
+	https://github.com/adafruit/Adafruit_MPU6050/archive/refs/tags/2.2.9.zip
+	# renovate: datasource=github-tags depName=Adafruit LIS3DH packageName=adafruit/Adafruit_LIS3DH
+	https://github.com/adafruit/Adafruit_LIS3DH/archive/refs/tags/1.3.0.zip
+	# renovate: datasource=github-tags depName=Adafruit AHTX0 packageName=adafruit/Adafruit_AHTX0
+	https://github.com/adafruit/Adafruit_AHTX0/archive/refs/tags/2.0.6.zip
+	# renovate: datasource=github-tags depName=Adafruit LSM6DS packageName=adafruit/Adafruit_LSM6DS
+	https://github.com/adafruit/Adafruit_LSM6DS/archive/refs/tags/4.7.4.zip
+	# renovate: datasource=github-tags depName=Adafruit TSL2591 packageName=adafruit/Adafruit_TSL2591_Library
+	https://github.com/adafruit/Adafruit_TSL2591_Library/archive/refs/tags/1.4.5.zip
+	# renovate: datasource=github-tags depName=EmotiBit MLX90632 packageName=emotibit/EmotiBit_MLX90632
+	https://github.com/EmotiBit/EmotiBit_MLX90632/archive/refs/tags/v1.0.8.zip
+	# renovate: datasource=github-tags depName=Adafruit MLX90614 packageName=adafruit/Adafruit_MLX90614
+	https://github.com/adafruit/Adafruit-MLX90614-Library/archive/refs/tags/2.1.6.zip
 	# renovate: datasource=git-refs depName=INA3221 packageName=https://github.com/sgtwilko/INA3221 gitBranch=FixOverflow
 	https://github.com/sgtwilko/INA3221/archive/bb03d7e9bfcc74fc798838a54f4f99738f29fc6a.zip
-	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
-	mprograms/QMC5883LCompass@1.2.3
-	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
-	dfrobot/DFRobot_RTU@1.0.6
+	# renovate: datasource=github-tags depName=QMC5883L Compass packageName=mprograms/QMC5883LCompass
+	https://github.com/mprograms/QMC5883LCompass/archive/refs/tags/v1.2.3.zip
+	# renovate: datasource=github-tags depName=DFRobot_RTU packageName=dfrobot/DFRobot_RTU
+	https://github.com/DFRobot/DFRobot_RTU/archive/refs/tags/V1.0.6.zip
 	# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
 	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
-	# renovate: datasource=custom.pio depName=INA226 packageName=robtillaart/library/INA226
-	robtillaart/INA226@0.6.6
-	# renovate: datasource=custom.pio depName=SparkFun MAX3010x packageName=sparkfun/library/SparkFun MAX3010x Pulse and Proximity Sensor Library
-	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2
-	# renovate: datasource=custom.pio depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/library/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library
-	sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@1.3.2
-	# renovate: datasource=custom.pio depName=Adafruit LTR390 Library packageName=adafruit/library/Adafruit LTR390 Library
-	adafruit/Adafruit LTR390 Library@1.1.2
-	# renovate: datasource=custom.pio depName=Adafruit PCT2075 packageName=adafruit/library/Adafruit PCT2075
-	adafruit/Adafruit PCT2075@1.0.6
-	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
-	dfrobot/DFRobot_BMM150@1.0.0
-	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
-	adafruit/Adafruit TSL2561@1.1.3
-	# renovate: datasource=custom.pio depName=BH1750_WE packageName=wollewald/library/BH1750_WE
-	wollewald/BH1750_WE@1.1.10
+	# renovate: datasource=github-tags depName=INA226 packageName=robtillaart/INA226
+	https://github.com/RobTillaart/INA226/archive/refs/tags/0.6.6.zip
+	# renovate: datasource=github-tags depName=SparkFun MAX3010x packageName=sparkfun/SparkFun_MAX3010x_Sensor_Library
+	https://github.com/sparkfun/SparkFun_MAX3010x_Sensor_Library/archive/refs/tags/v1.1.2.zip
+	# renovate: datasource=github-tags depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/SparkFun_ICM-20948_ArduinoLibrary
+	https://github.com/sparkfun/SparkFun_ICM-20948_ArduinoLibrary/archive/refs/tags/v1.3.2.zip
+	# renovate: datasource=github-tags depName=Adafruit LTR390 Library packageName=adafruit/Adafruit_LTR390
+	https://github.com/adafruit/Adafruit_LTR390/archive/refs/tags/1.1.2.zip
+	# renovate: datasource=github-tags depName=Adafruit PCT2075 packageName=adafruit/Adafruit_PCT2075
+	https://github.com/adafruit/Adafruit_PCT2075/archive/refs/tags/1.0.6.zip
+	# renovate: datasource=github-tags depName=DFRobot_BMM150 packageName=dfrobot/DFRobot_BMM150
+	https://github.com/DFRobot/DFRobot_BMM150/archive/refs/tags/V1.0.0.zip
+	# renovate: datasource=github-tags depName=Adafruit_TSL2561 packageName=adafruit/Adafruit_TSL2561
+	https://github.com/adafruit/Adafruit_TSL2561/archive/refs/tags/1.1.3.zip
+	# renovate: datasource=github-tags depName=BH1750_WE packageName=wollewald/BH1750_WE
+	https://github.com/wollewald/BH1750_WE/archive/refs/tags/1.1.10.zip
 
 ; Common environmental sensor libraries (not included in native / portduino)
 [environmental_extra_common]
 lib_deps =
-	# renovate: datasource=custom.pio depName=Adafruit BMP3XX packageName=adafruit/library/Adafruit BMP3XX Library
-	adafruit/Adafruit BMP3XX Library@2.1.6
-	# renovate: datasource=custom.pio depName=Adafruit MAX1704X packageName=adafruit/library/Adafruit MAX1704X
-	adafruit/Adafruit MAX1704X@1.0.3
-	# renovate: datasource=custom.pio depName=Adafruit SHTC3 packageName=adafruit/library/Adafruit SHTC3 Library
-	adafruit/Adafruit SHTC3 Library@1.0.2
-	# renovate: datasource=custom.pio depName=Adafruit LPS2X packageName=adafruit/library/Adafruit LPS2X
-	adafruit/Adafruit LPS2X@2.0.6
-	# renovate: datasource=custom.pio depName=Adafruit SHT31 packageName=adafruit/library/Adafruit SHT31 Library
-	adafruit/Adafruit SHT31 Library@2.2.2
-	# renovate: datasource=custom.pio depName=Adafruit VEML7700 packageName=adafruit/library/Adafruit VEML7700 Library
-	adafruit/Adafruit VEML7700 Library@2.1.6
-	# renovate: datasource=custom.pio depName=Adafruit SHT4x packageName=adafruit/library/Adafruit SHT4x Library
-	adafruit/Adafruit SHT4x Library@1.0.5
-	# renovate: datasource=custom.pio depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/library/SparkFun Qwiic Scale NAU7802 Arduino Library
-	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
+	# renovate: datasource=github-tags depName=Adafruit BMP3XX packageName=adafruit/Adafruit_BMP3XX
+	https://github.com/adafruit/Adafruit_BMP3XX/archive/refs/tags/2.1.6.zip
+	# renovate: datasource=github-tags depName=Adafruit MAX1704X packageName=adafruit/Adafruit_MAX1704X
+	https://github.com/adafruit/Adafruit_MAX1704X/archive/refs/tags/1.0.3.zip
+	# renovate: datasource=github-tags depName=Adafruit SHTC3 packageName=adafruit/Adafruit_SHTC3
+	https://github.com/adafruit/Adafruit_SHTC3/archive/refs/tags/1.0.2.zip
+	# renovate: datasource=github-tags depName=Adafruit LPS2X packageName=adafruit/Adafruit_LPS2X
+	https://github.com/adafruit/Adafruit_LPS2X/archive/refs/tags/2.0.6.zip
+	# renovate: datasource=github-tags depName=Adafruit SHT31 packageName=adafruit/Adafruit_SHT31
+	https://github.com/adafruit/Adafruit_SHT31/archive/refs/tags/2.2.2.zip
+	# renovate: datasource=github-tags depName=Adafruit VEML7700 packageName=adafruit/Adafruit_VEML7700
+	https://github.com/adafruit/Adafruit_VEML7700/archive/refs/tags/2.1.6.zip
+	# renovate: datasource=github-tags depName=Adafruit SHT4x packageName=adafruit/Adafruit_SHT4X
+	https://github.com/adafruit/Adafruit_SHT4X/archive/refs/tags/1.0.5.zip
+	# renovate: datasource=github-tags depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/SparkFun_Qwiic_Scale_NAU7802_Arduino_Library
+	https://github.com/sparkfun/SparkFun_Qwiic_Scale_NAU7802_Arduino_Library/archive/refs/tags/v1.0.6.zip
 	# renovate: datasource=custom.pio depName=ClosedCube OPT3001 packageName=closedcube/library/ClosedCube OPT3001
 	closedcube/ClosedCube OPT3001@1.1.2
 	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
 	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
-	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
-	sensirion/Sensirion Core@0.7.3
-	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
-	sensirion/Sensirion I2C SCD4x@1.1.0
-	# renovate: datasource=custom.pio depName=Sensirion I2C SFA3x packageName=sensirion/library/Sensirion I2C SFA3x
-	sensirion/Sensirion I2C SFA3x@1.0.0
-	# renovate: datasource=custom.pio depName=Sensirion I2C SCD30 packageName=sensirion/library/Sensirion I2C SCD30
-	sensirion/Sensirion I2C SCD30@1.0.0
+	# renovate: datasource=github-tags depName=Sensirion Core packageName=sensirion/arduino-core
+	https://github.com/Sensirion/arduino-core/archive/refs/tags/0.7.3.zip
+	# renovate: datasource=github-tags depName=Sensirion I2C SCD4x packageName=sensirion/arduino-i2c-scd4x
+	https://github.com/Sensirion/arduino-i2c-scd4x/archive/refs/tags/1.1.0.zip
+	# renovate: datasource=github-tags depName=Sensirion I2C SFA3x packageName=sensirion/arduino-i2c-sfa3x
+	https://github.com/Sensirion/arduino-i2c-sfa3x/archive/refs/tags/1.0.0.zip
+	# renovate: datasource=github-tags depName=Sensirion I2C SCD30 packageName=sensirion/arduino-i2c-scd30
+	https://github.com/Sensirion/arduino-i2c-scd30/archive/refs/tags/1.0.0.zip
+	# renovate: datasource=github-tags depName=arduino-sht packageName=sensirion/arduino-sht
+	https://github.com/Sensirion/arduino-sht/archive/refs/tags/v1.2.6.zip
 
 ; Environmental sensors with BSEC2 (Bosch proprietary IAQ)
 [environmental_extra]
 lib_deps =
 	${environmental_extra_common.lib_deps}
-	# renovate: datasource=custom.pio depName=Bosch BSEC2 packageName=boschsensortec/library/bsec2
-	boschsensortec/bsec2@1.10.2610
-	# renovate: datasource=custom.pio depName=Bosch BME68x packageName=boschsensortec/library/BME68x Sensor Library
-	boschsensortec/BME68x Sensor Library@1.3.40408
+	# renovate: datasource=github-tags depName=Bosch BSEC2 packageName=boschsensortec/Bosch-BSEC2-Library
+	https://github.com/boschsensortec/Bosch-BSEC2-Library/archive/refs/tags/1.10.2610.zip
+	# renovate: datasource=github-tags depName=Bosch BME68x packageName=boschsensortec/Bosch-BME68x-Library
+	https://github.com/boschsensortec/Bosch-BME68x-Library/archive/refs/tags/v1.3.40408.zip
 
 ; Environmental sensors without BSEC (saves ~3.5KB DRAM for original ESP32 targets)
 [environmental_extra_no_bsec]
 lib_deps =
 	${environmental_extra_common.lib_deps}
-	# renovate: datasource=custom.pio depName=adafruit/Adafruit BME680 Library packageName=adafruit/library/Adafruit BME680
-	adafruit/Adafruit BME680 Library@^2.0.5
+	# renovate: datasource=github-tags depName=Adafruit_BME680 packageName=adafruit/Adafruit_BME680
+	https://github.com/adafruit/Adafruit_BME680/archive/refs/tags/2.0.6.zip

renovate.json

@@ -4,6 +4,8 @@
     ":dependencyDashboard",
     ":semanticCommitTypeAll(chore)",
     ":ignoreModulesAndTests",
+    ":noUnscheduledUpdates",
+    "schedule:daily",
     "group:recommended",
     "replacements:all",
     "workarounds:all"

src/DebugConfiguration.cpp

@@ -98,7 +98,6 @@ Syslog &Syslog::logMask(uint8_t priMask)
 
 void Syslog::enable()
 {
-    this->_client->begin(this->_port);
     this->_enabled = true;
 }
 
@@ -166,14 +165,21 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
     if ((pri & LOG_FACMASK) == 0)
         pri = LOG_MAKEPRI(LOG_FAC(this->_priDefault), pri);
 
+    // W5100S: acquire UDP socket on-demand to avoid permanent socket consumption
+    if (!this->_client->begin(this->_port)) {
+        return false;
+    }
+
     if (this->_server != NULL) {
         result = this->_client->beginPacket(this->_server, this->_port);
     } else {
         result = this->_client->beginPacket(this->_ip, this->_port);
     }
 
-    if (result != 1)
+    if (result != 1) {
+        this->_client->stop();
         return false;
+    }
 
     this->_client->print('<');
     this->_client->print(pri);
@@ -193,6 +199,8 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
     this->_client->print(message);
     this->_client->endPacket();
 
+    this->_client->stop(); // W5100S: release UDP socket for other services
+
     return true;
 }
 

src/MessageStore.h

@@ -21,8 +21,15 @@
 // How many messages are stored (RAM + flash).
 // Define -DMESSAGE_HISTORY_LIMIT=N in build_flags to control memory usage.
 #ifndef MESSAGE_HISTORY_LIMIT
+#if defined(ARCH_ESP32) &&                                                                                                       \
+    !(defined(CONFIG_IDF_TARGET_ESP32C3) || defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32S2))
+// Baseline ESP32 (non-PSRAM variants) has limited heap; reduce message history on resource-constrained builds.
+// Override with -DMESSAGE_HISTORY_LIMIT=N if needed.
+#define MESSAGE_HISTORY_LIMIT 10
+#else
 #define MESSAGE_HISTORY_LIMIT 20
 #endif
+#endif
 
 // Internal alias used everywhere in code – do NOT redefine elsewhere.
 #define MAX_MESSAGES_SAVED MESSAGE_HISTORY_LIMIT

src/Power.cpp

@@ -35,6 +35,27 @@
 #include "nrfx_power.h"
 #endif
 
+#if defined(ARCH_NRF52)
+#include "Nrf52SaadcLock.h"
+#include "concurrency/LockGuard.h"
+#endif
+
+#if defined(ARCH_STM32WL) && defined(BATTERY_PIN)
+#include "stm32yyxx_ll_adc.h"
+
+/* Analog read resolution */
+#if defined(LL_ADC_RESOLUTION_12B)
+#define LL_ADC_RESOLUTION LL_ADC_RESOLUTION_12B
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#elif defined(LL_ADC_DS_DATA_WIDTH_12_BIT)
+#define LL_ADC_RESOLUTION LL_ADC_DS_DATA_WIDTH_12_BIT
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#else
+#error "ADC resolution could not be defined!"
+#endif
+#define ADC_RANGE (1 << BATTERY_SENSE_RESOLUTION_BITS)
+#endif
+
 #if defined(DEBUG_HEAP_MQTT) && !MESHTASTIC_EXCLUDE_MQTT
 #include "mqtt/MQTT.h"
 #include "target_specific.h"
@@ -323,11 +344,20 @@ class AnalogBatteryLevel : public HasBatteryLevel
             float scaled = 0;
 
             battery_adcEnable();
-#ifdef ARCH_ESP32 // ADC block for espressif platforms
+#ifdef ARCH_STM32WL
+            // STM32 ADC with VREFINT runtime calibration
+            Vref = __LL_ADC_CALC_VREFANALOG_VOLTAGE(analogRead(AVREF), LL_ADC_RESOLUTION);
+            raw = analogRead(BATTERY_PIN);
+            scaled = __LL_ADC_CALC_DATA_TO_VOLTAGE(Vref, raw, LL_ADC_RESOLUTION);
+            scaled *= operativeAdcMultiplier;
+#elif defined(ARCH_ESP32) // ADC block for espressif platforms
             raw = espAdcRead();
             scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
             scaled *= operativeAdcMultiplier;
-#else // block for all other platforms
+#else                     // block for all other platforms
+#ifdef ARCH_NRF52
+            concurrency::LockGuard saadcGuard(concurrency::nrf52SaadcLock);
+#endif
             for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
                 raw += analogRead(BATTERY_PIN);
             }
@@ -522,6 +552,11 @@ class AnalogBatteryLevel : public HasBatteryLevel
     bool initial_read_done = false;
     float last_read_value = (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS);
     uint32_t last_read_time_ms = 0;
+#ifdef ARCH_STM32WL
+    // 3300mV placeholder for STM32 errata where VREFINT factory calibration may be missing
+    // (e.g. STM32U0, see DS14756 Rev 3 §2.4.1 "VREFINT offset")
+    uint32_t Vref = 3300;
+#endif
 
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && defined(HAS_RAKPROT)
 
@@ -631,7 +666,9 @@ bool Power::analogInit()
 #define BATTERY_SENSE_RESOLUTION_BITS 10
 #endif
 
-#ifdef ARCH_ESP32 // ESP32 needs special analog stuff
+#ifdef ARCH_STM32WL
+    analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS);
+#elif defined(ARCH_ESP32) // ESP32 needs special analog stuff
 
 #ifndef ADC_WIDTH // max resolution by default
     static const adc_bits_width_t width = ADC_WIDTH_BIT_12;
@@ -641,7 +678,7 @@ bool Power::analogInit()
 #ifndef BAT_MEASURE_ADC_UNIT // ADC1
     adc1_config_width(width);
     adc1_config_channel_atten(adc_channel, atten);
-#else // ADC2
+#else                        // ADC2
     adc2_config_channel_atten(adc_channel, atten);
 #ifndef CONFIG_IDF_TARGET_ESP32S3
     // ADC2 wifi bug workaround
@@ -671,7 +708,7 @@ bool Power::analogInit()
 
     // NRF52 ADC init moved to powerHAL_init in nrf52 platform
 
-#ifndef ARCH_ESP32
+#if !defined(ARCH_ESP32) && !defined(ARCH_STM32WL)
     analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS);
 #endif
 

src/RedirectablePrint.cpp

@@ -51,7 +51,7 @@ size_t RedirectablePrint::write(uint8_t c)
 size_t RedirectablePrint::vprintf(const char *logLevel, const char *format, va_list arg)
 {
     va_list copy;
-#if ENABLE_JSON_LOGGING || ARCH_PORTDUINO
+#if ARCH_PORTDUINO
     static char printBuf[512];
 #else
     static char printBuf[160];
@@ -137,7 +137,7 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
         if (color) {
             ::printf("\u001b[0m");
         }
-        ::printf("| %02d:%02d:%02d %u ", hour, min, sec, millis() / 1000);
+        ::printf("| %02d:%02d:%02d %u.%03u ", hour, min, sec, millis() / 1000, millis() % 1000);
 #else
         printf("%s ", logLevel);
         if (color) {
@@ -151,7 +151,7 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
         if (color) {
             ::printf("\u001b[0m");
         }
-        ::printf("| ??:??:?? %u ", millis() / 1000);
+        ::printf("| ??:??:?? %u.%03u ", millis() / 1000, millis() % 1000);
 #else
         printf("%s ", logLevel);
         if (color) {

src/SerialConsole.cpp

@@ -30,6 +30,9 @@ SerialConsole *console;
 
 void consoleInit()
 {
+    if (console) {
+        return;
+    }
     auto sc = new SerialConsole(); // Must be dynamically allocated because we are now inheriting from thread
 
 #if defined(SERIAL_HAS_ON_RECEIVE)

src/buzz/buzz.cpp

@@ -6,6 +6,11 @@
 #include "Tone.h"
 #endif
 
+#if defined(HAS_I2S)
+#include "main.h"
+#include <unordered_map>
+#endif
+
 #if !defined(ARCH_PORTDUINO)
 extern "C" void delay(uint32_t dwMs);
 #endif
@@ -50,6 +55,50 @@ const int DURATION_1_2 = 500;  // 1/2 note
 const int DURATION_3_4 = 750;  // 3/4 note
 const int DURATION_1_1 = 1000; // 1/1 note
 
+#ifdef HAS_I2S
+void playTonesRTTTL(const ToneDuration *tone_durations, int size)
+{
+    // translate ToneDuration[] to RTTTL string and play using audioThread
+    static std::unordered_map<int, std::string> freqToNote = {
+        {NOTE_C3, "c4"},   {NOTE_CS3, "c#4"}, {NOTE_D3, "d4"},   {NOTE_DS3, "d#4"}, {NOTE_E3, "e4"},   {NOTE_F3, "f4"},
+        {NOTE_FS3, "f#4"}, {NOTE_G3, "g4"},   {NOTE_GS3, "g#4"}, {NOTE_A3, "a4"},   {NOTE_AS3, "a#4"}, {NOTE_B3, "b4"},
+        {NOTE_C4, "c5"},   {NOTE_E4, "e5"},   {NOTE_G4, "g5"},   {NOTE_A4, "a5"},   {NOTE_C5, "c6"},   {NOTE_E5, "e6"},
+        {NOTE_G5, "g6"},   {NOTE_F5, "f6"},   {NOTE_G6, "g7"},   {NOTE_E7, "e8"}};
+
+    char rtttl[128] = "tone:d=32,o=4,b=200:"; // default duration and octave
+    for (int i = 0; i < size; i++) {
+        const auto &td = tone_durations[i];
+        std::string note = "b4";
+        if (freqToNote.find(td.frequency_khz) != freqToNote.end()) {
+            note = freqToNote[td.frequency_khz];
+        }
+        int dur = 32; // default duration
+        if (td.duration_ms >= 1000)
+            dur = 1;
+        else if (td.duration_ms >= 500)
+            dur = 2;
+        else if (td.duration_ms >= 250)
+            dur = 4;
+        else if (td.duration_ms >= 125)
+            dur = 8;
+        else if (td.duration_ms >= 62)
+            dur = 16;
+        else
+            dur = 32;
+
+        char noteStr[64];
+        snprintf(noteStr, sizeof(noteStr), "%s,%d", note.c_str(), dur);
+        strncat(rtttl, noteStr, sizeof(rtttl) - strlen(rtttl) - 1);
+
+        audioThread->beginRttl(rtttl, strlen(rtttl));
+        while (audioThread->isPlaying()) {
+            delay(10);
+        }
+        return;
+    }
+}
+#endif
+
 void playTones(const ToneDuration *tone_durations, int size)
 {
     if (config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_DISABLED ||
@@ -57,7 +106,13 @@ void playTones(const ToneDuration *tone_durations, int size)
         // Buzzer is disabled or not set to system tones
         return;
     }
-#ifdef PIN_BUZZER
+#ifdef HAS_I2S
+    if (moduleConfig.external_notification.use_i2s_as_buzzer && audioThread) {
+        playTonesRTTTL(tone_durations, size);
+        return;
+    }
+#endif
+#if defined(PIN_BUZZER)
     if (!config.device.buzzer_gpio)
         config.device.buzzer_gpio = PIN_BUZZER;
 #endif

src/concurrency/BinarySemaphorePosix.cpp

@@ -1,10 +1,85 @@
 #include "concurrency/BinarySemaphorePosix.h"
 #include "configuration.h"
 
+#include <errno.h>
+#include <sys/time.h>
+
 #ifndef HAS_FREE_RTOS
 
 namespace concurrency
 {
+#ifdef ARCH_PORTDUINO
+
+BinarySemaphorePosix::BinarySemaphorePosix()
+{
+    if (pthread_mutex_init(&mutex, NULL) != 0) {
+        throw std::runtime_error("pthread_mutex_init failed");
+    }
+    if (pthread_cond_init(&cond, NULL) != 0) {
+        pthread_mutex_destroy(&mutex);
+        throw std::runtime_error("pthread_cond_init failed");
+    }
+    signaled = false;
+}
+
+BinarySemaphorePosix::~BinarySemaphorePosix()
+{
+    pthread_cond_destroy(&cond);
+    pthread_mutex_destroy(&mutex);
+}
+
+/**
+ * Returns false if we timed out
+ */
+bool BinarySemaphorePosix::take(uint32_t msec)
+{
+    pthread_mutex_lock(&mutex);
+
+    if (!signaled) {
+        struct timespec ts;
+        clock_gettime(CLOCK_REALTIME, &ts);
+
+        ts.tv_sec += msec / 1000;
+        ts.tv_nsec += (msec % 1000) * 1000000L;
+        if (ts.tv_nsec >= 1000000000L) {
+            ts.tv_sec += 1;
+            ts.tv_nsec -= 1000000000L;
+        }
+
+        while (!signaled) {
+            int rc = pthread_cond_timedwait(&cond, &mutex, &ts);
+            if (rc == ETIMEDOUT)
+                break;
+            if (rc != 0) {
+                // Some other error occurred
+                pthread_mutex_unlock(&mutex);
+                throw std::runtime_error("pthread_cond_timedwait failed: " + std::to_string(rc));
+            }
+        }
+    }
+
+    bool wasSignaled = signaled;
+    signaled = false; // consume the signal (binary semaphore)
+
+    pthread_mutex_unlock(&mutex);
+    return wasSignaled;
+}
+
+void BinarySemaphorePosix::give()
+{
+    pthread_mutex_lock(&mutex);
+    signaled = true;
+    pthread_cond_signal(&cond);
+    pthread_mutex_unlock(&mutex);
+}
+
+IRAM_ATTR void BinarySemaphorePosix::giveFromISR(BaseType_t *pxHigherPriorityTaskWoken)
+{
+    give();
+    if (pxHigherPriorityTaskWoken)
+        *pxHigherPriorityTaskWoken = true;
+}
+#else
 
 BinarySemaphorePosix::BinarySemaphorePosix() {}
 
@@ -22,7 +97,8 @@ bool BinarySemaphorePosix::take(uint32_t msec)
 void BinarySemaphorePosix::give() {}
 
 IRAM_ATTR void BinarySemaphorePosix::giveFromISR(BaseType_t *pxHigherPriorityTaskWoken) {}
+#endif
 
 } // namespace concurrency
 
-#endif
+#endif

src/concurrency/BinarySemaphorePosix.h

@@ -2,6 +2,10 @@
 
 #include "../freertosinc.h"
 
+#ifdef ARCH_PORTDUINO
+#include <pthread.h>
+#endif
+
 namespace concurrency
 {
 
@@ -9,7 +13,12 @@ namespace concurrency
 
 class BinarySemaphorePosix
 {
-    // SemaphoreHandle_t semaphore;
+
+#ifdef ARCH_PORTDUINO
+    pthread_mutex_t mutex;
+    pthread_cond_t cond;
+    bool signaled;
+#endif
 
   public:
     BinarySemaphorePosix();
@@ -27,4 +36,4 @@ class BinarySemaphorePosix
 
 #endif
 
-} // namespace concurrency
+} // namespace concurrency