Protobufs

.clusterfuzzlite/Dockerfile

@@ -20,7 +20,7 @@ ENV PIP_ROOT_USER_ACTION=ignore
 RUN apt-get update && apt-get install --no-install-recommends -y \
         cmake git zip libgpiod-dev libbluetooth-dev libi2c-dev \
         libunistring-dev libmicrohttpd-dev libgnutls28-dev libgcrypt20-dev \
-        libusb-1.0-0-dev libssl-dev pkg-config libsqlite3-dev libsdl2-dev && \
+        libusb-1.0-0-dev libssl-dev pkg-config libsqlite3-dev && \
     apt-get clean && rm -rf /var/lib/apt/lists/* && \
     pip install --no-cache-dir -U \
         platformio==6.1.16 \

.github/actions/build-variant/action.yml

@@ -100,7 +100,7 @@ runs:
       id: version
 
     - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v7
+      uses: actions/upload-artifact@v6
       with:
         name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}
         overwrite: true

.github/actions/setup-base/action.yml

@@ -8,6 +8,8 @@ runs:
       uses: actions/checkout@v6
       with:
         submodules: recursive
+        ref: ${{github.event.pull_request.head.ref}}
+        repository: ${{github.event.pull_request.head.repo.full_name}}
 
     - name: Install dependencies
       shell: bash

.github/pull_request_template.md

@@ -4,16 +4,16 @@
 
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
   to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
-  is appreciated." This will allow other devs to potentially save you time by not accidentally duplicating work etc...
+  is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
-- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the Linux version),
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the linux version),
   because it automatically follows our indentation rules and its auto reformatting will not cause spurious changes to lines.
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
 - Please also enable "Allow edits by maintainers".
 - Please do not submit untested code.
-- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and community members can help test your changes.
+- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and commnunity members can help test your changes.
 - If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord
 
 ## 🤝 Attestations

.github/workflows/build_debian_src.yml

@@ -16,7 +16,8 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
+  packages: write
 
 jobs:
   build-debian-src:
@@ -27,6 +28,8 @@ jobs:
         with:
           submodules: recursive
           path: meshtasticd
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Install deps
         shell: bash
@@ -39,8 +42,7 @@ jobs:
           sudo mk-build-deps --install --remove --tool='apt-get -o Debug::pkgProblemResolver=yes --no-install-recommends --yes' debian/control
 
       - name: Import GPG key
-        if: github.event_name != 'pull_request' && github.event_name != 'pull_request_target'
+        uses: crazy-max/ghaction-import-gpg@v6
-        uses: crazy-max/ghaction-import-gpg@v7
         with:
           gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
         id: gpg
@@ -58,11 +60,11 @@ jobs:
         run: debian/ci_pack_sdeb.sh
         env:
           SERIES: ${{ inputs.series }}
-          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid || '' }}
+          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid }}
           PKG_VERSION: ${{ steps.version.outputs.deb }}
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           overwrite: true

.github/workflows/build_firmware.yml

@@ -26,6 +26,8 @@ jobs:
       - uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Build ${{ inputs.platform }}
         id: build
@@ -109,7 +111,7 @@ jobs:
           echo "</details>" >> $GITHUB_STEP_SUMMARY
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         id: upload-firmware
         with:
           name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
@@ -125,7 +127,7 @@ jobs:
             release/device-*.bat
 
       - name: Store manifests as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         id: upload-manifest
         with:
           name: manifest-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}

.github/workflows/build_one_target.yml

@@ -87,7 +87,7 @@ jobs:
 
   gather-artifacts:
     permissions:
-      contents: read
+      contents: write
       pull-requests: write
     runs-on: ubuntu-latest
     needs: [version, build]
@@ -98,7 +98,7 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
         with:
           path: ./
           pattern: firmware-*-*
@@ -111,7 +111,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         with:
           name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -127,7 +127,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
         with:
           pattern: firmware-*-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -146,7 +146,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         with:
           name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
           overwrite: true

.github/workflows/daily_packaging.yml

@@ -5,7 +5,7 @@ on:
   workflow_dispatch:
   push:
     branches:
-      - develop # Default branch, same as 'cron' above
+      - master
     paths:
       - debian/**
       - "*.rpkg"
@@ -16,7 +16,7 @@ on:
       - .github/workflows/hook_copr.yml
 
 permissions:
-  contents: read
+  contents: write
   packages: write
 
 jobs:
@@ -35,8 +35,8 @@ jobs:
         series:
           - jammy # 22.04 LTS
           - noble # 24.04 LTS
+          - plucky # 25.04
           - questing # 25.10
-          - resolute # 26.04 LTS
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: ppa:meshtastic/daily

.github/workflows/docker_build.yml

@@ -37,7 +37,7 @@ on:
         value: ${{ jobs.docker-build.outputs.digest }}
 
 permissions:
-  contents: read
+  contents: write
   packages: write
 
 jobs:
@@ -50,41 +50,35 @@ jobs:
         uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
-      - name: Set up QEMU
+      - name: Docker login
-        uses: docker/setup-qemu-action@v4
+        if: ${{ inputs.push }}
+        uses: docker/login-action@v3
         with:
-          cache-image: true
+          username: meshtastic
+          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
+
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v3
 
       - name: Docker setup
-        uses: docker/setup-buildx-action@v4
+        uses: docker/setup-buildx-action@v3
-        with:
-          # Add Google/Amazon DockerHub mirrors to buildkit config
-          # https://docs.docker.com/build/ci/github-actions/configure-builder/#registry-mirror
-          buildkitd-config-inline: |
-            [registry."docker.io"]
-              mirrors = ["mirror.gcr.io", "public.ecr.aws"]
 
       - name: Sanitize platform string
         id: sanitize_platform
         # Replace slashes with underscores
         run: echo "cleaned_platform=${{ inputs.platform }}" | sed 's/\//_/g' >> $GITHUB_OUTPUT
 
-      - name: Docker login
-        if: ${{ inputs.push }}
-        uses: docker/login-action@v4
-        with:
-          username: meshtastic
-          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
-
       - name: Docker tag
         id: meta
-        uses: docker/metadata-action@v6
+        uses: docker/metadata-action@v5
         with:
           images: meshtastic/meshtasticd
           tags: |
@@ -92,7 +86,7 @@ jobs:
           flavor: latest=false
 
       - name: Docker build and push
-        uses: docker/build-push-action@v7
+        uses: docker/build-push-action@v6
         id: docker_variant
         with:
           context: .
@@ -103,6 +97,3 @@ jobs:
           platforms: ${{ inputs.platform }}
           build-args: |
             PIO_ENV=${{ inputs.pio_env }}
-          # Cache image layers in GitHub Actions cache to speed up subsequent builds.
-          cache-from: type=gha
-          cache-to: type=gha,mode=max

.github/workflows/docker_manifest.yml

@@ -12,7 +12,7 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
   packages: write
 
 jobs:
@@ -86,6 +86,8 @@ jobs:
         uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Get release version string
         run: |
@@ -137,14 +139,14 @@ jobs:
         id: tags
 
       - name: Docker login
-        uses: docker/login-action@v4
+        uses: docker/login-action@v3
         with:
           username: meshtastic
           password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
 
       - name: Docker meta (Debian)
         id: meta_debian
-        uses: docker/metadata-action@v6
+        uses: docker/metadata-action@v5
         with:
           images: meshtastic/meshtasticd
           tags: |
@@ -165,7 +167,7 @@ jobs:
 
       - name: Docker meta (Alpine)
         id: meta_alpine
-        uses: docker/metadata-action@v6
+        uses: docker/metadata-action@v5
         with:
           images: meshtastic/meshtasticd
           tags: |

.github/workflows/hook_copr.yml

@@ -11,7 +11,8 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
+  packages: write
 
 jobs:
   build-copr-hook:
@@ -21,6 +22,8 @@ jobs:
         uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{ github.ref }}
+          repository: ${{ github.repository }}
 
       - name: Trigger COPR build
         uses: vidplace7/copr-build@main

.github/workflows/main_matrix.yml

@@ -15,7 +15,8 @@ on:
       - "**.md"
       - version.properties
 
-  pull_request:
+  # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
+  pull_request_target:
     branches:
       - master
       - develop
@@ -28,8 +29,6 @@ on:
 
   workflow_dispatch:
 
-permissions: read-all
-
 jobs:
   setup:
     strategy:
@@ -89,6 +88,8 @@ jobs:
       - uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
       - name: Check ${{ matrix.check.board }}
         uses: meshtastic/gh-action-firmware@main
         with:
@@ -125,16 +126,9 @@ jobs:
 
   test-native:
     if: ${{ !contains(github.ref_name, 'event/') && github.repository == 'meshtastic/firmware' }}
-    permissions: # Needed for dorny/test-reporter.
-      contents: read
-      actions: read
-      checks: write
     uses: ./.github/workflows/test_native.yml
 
   docker:
-    permissions: # Needed for pushing to GHCR.
-      contents: read
-      packages: write
     strategy:
       fail-fast: false
       matrix:
@@ -159,6 +153,9 @@ jobs:
   gather-artifacts:
     # trunk-ignore(checkov/CKV2_GHA_1)
     if: github.repository == 'meshtastic/firmware'
+    permissions:
+      contents: write
+      pull-requests: write
     strategy:
       fail-fast: false
       matrix:
@@ -176,8 +173,11 @@ jobs:
     steps:
       - name: Checkout code
         uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -187,7 +187,7 @@ jobs:
         run: ls -R
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -205,7 +205,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -224,13 +224,20 @@ jobs:
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
           path: ./*.elf
           retention-days: 30
 
+      - uses: scruplelesswizard/comment-artifact@main
+        if: ${{ github.event_name == 'pull_request' }}
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+
   shame:
     if: github.repository == 'meshtastic/firmware'
     continue-on-error: true
@@ -238,44 +245,42 @@ jobs:
     needs: [build]
     steps:
       - uses: actions/checkout@v6
-        if: github.event_name == 'pull_request'
+        if: github.event_name == 'pull_request_target'
         with:
           filter: blob:none # means we download all the git history but none of the commit (except ones with checkout like the head)
           fetch-depth: 0
       - name: Download the current manifests
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
         with:
           path: ./manifests-new/
           pattern: manifest-*
           merge-multiple: true
       - name: Upload combined manifests for later commit and global stats crunching.
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         id: upload-manifest
         with:
           name: manifests-${{ github.sha }}
           overwrite: true
           path: manifests-new/*.mt.json
       - name: Find the merge base
-        if: github.event_name == 'pull_request'
+        if: github.event_name == 'pull_request_target'
         run: echo "MERGE_BASE=$(git merge-base "origin/$base" "$head")" >> $GITHUB_ENV
         env:
           base: ${{ github.base_ref }}
           head: ${{ github.sha }}
       # Currently broken (for-loop through EVERY artifact -- rate limiting)
       # - name: Download the old manifests
-      #   if: github.event_name == 'pull_request'
+      #   if: github.event_name == 'pull_request_target'
       #   run: gh run download -R "$repo" --name "manifests-$merge_base" --dir manifest-old/
       #   env:
       #     GH_TOKEN: ${{ github.token }}
       #     merge_base: ${{ env.MERGE_BASE }}
       #     repo: ${{ github.repository }}
       # - name: Do scan and post comment
-      #   if: github.event_name == 'pull_request'
+      #   if: github.event_name == 'pull_request_target'
       #   run: python3 bin/shame.py ${{ github.event.pull_request.number }} manifests-old/ manifests-new/
 
   release-artifacts:
-    permissions: # Needed for 'gh release upload'.
-      contents: write
     runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     outputs:
@@ -301,17 +306,15 @@ jobs:
         id: release_notes
         run: |
           chmod +x ./bin/generate_release_notes.py
-          NOTES=$(./bin/generate_release_notes.py ${{ needs.version.outputs.long }} --compare-ref HEAD 2>release_notes.log)
+          NOTES=$(./bin/generate_release_notes.py ${{ needs.version.outputs.long }})
           echo "notes<<EOF" >> $GITHUB_OUTPUT
           echo "$NOTES" >> $GITHUB_OUTPUT
           echo "EOF" >> $GITHUB_OUTPUT
-          echo "### Release note range" >> $GITHUB_STEP_SUMMARY
-          cat release_notes.log >> $GITHUB_STEP_SUMMARY
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Create release
-        uses: softprops/action-gh-release@v3
+        uses: softprops/action-gh-release@v2
         id: create_release
         with:
           draft: true
@@ -321,14 +324,14 @@ jobs:
           body: ${{ steps.release_notes.outputs.notes }}
 
       - name: Download source deb
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -352,7 +355,7 @@ jobs:
           }' > firmware-${{ needs.version.outputs.long }}.json
 
       - name: Save Release manifest artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         with:
           name: manifest-${{ needs.version.outputs.long }}
           overwrite: true
@@ -369,8 +372,6 @@ jobs:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
   release-firmware:
-    permissions: # Needed for 'gh release upload'.
-      contents: write
     strategy:
       fail-fast: false
       matrix:
@@ -395,7 +396,7 @@ jobs:
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -412,7 +413,7 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v7
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -453,14 +454,14 @@ jobs:
           python-version: 3.x
 
       - name: Get firmware artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true
           path: ./publish
 
       - name: Get manifest artifact
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
         with:
           pattern: manifest-${{ needs.version.outputs.long }}
           path: ./publish
@@ -468,7 +469,7 @@ jobs:
       - name: Generate release notes
         run: |
           chmod +x ./bin/generate_release_notes.py
-          ./bin/generate_release_notes.py ${{ needs.version.outputs.long }} --compare-ref HEAD > ./publish/release_notes.md
+          ./bin/generate_release_notes.py ${{ needs.version.outputs.long }} > ./publish/release_notes.md
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 

.github/workflows/merge_queue.yml

@@ -0,0 +1,371 @@
+name: Merge Queue
+# Not sure how concurrency works in merge_queue, removing for now.
+# concurrency:
+#   group: merge-queue-${{ github.head_ref || github.run_id }}
+#   cancel-in-progress: true
+on:
+  # Merge group is a special trigger that is used to trigger the workflow when a merge group is created.
+  merge_group:
+
+jobs:
+  setup:
+    strategy:
+      fail-fast: true
+      matrix:
+        arch:
+          - all
+          - check
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v6
+      - uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+          cache: pip
+      - run: pip install -U platformio
+      - name: Generate matrix
+        id: jsonStep
+        run: |
+          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
+          else  
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level pr)
+          fi
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
+          echo "${{matrix.arch}}=$TARGETS" >> $GITHUB_OUTPUT
+    outputs:
+      all: ${{ steps.jsonStep.outputs.all }}
+      check: ${{ steps.jsonStep.outputs.check }}
+
+  version:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v6
+      - name: Get release version string
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        id: version
+        env:
+          BUILD_LOCATION: local
+    outputs:
+      long: ${{ steps.version.outputs.long }}
+      deb: ${{ steps.version.outputs.deb }}
+
+  check:
+    needs: setup
+    strategy:
+      fail-fast: true
+      matrix:
+        check: ${{ fromJson(needs.setup.outputs.check) }}
+
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name != 'workflow_dispatch' }}
+    steps:
+      - uses: actions/checkout@v6
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+      - name: Check ${{ matrix.check.board }}
+        run: bin/check-all.sh ${{ matrix.check.board }}
+
+  build:
+    needs: [setup, version]
+    strategy:
+      matrix:
+        build: ${{ fromJson(needs.setup.outputs.all) }}
+    uses: ./.github/workflows/build_firmware.yml
+    with:
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.build.board }}
+      platform: ${{ matrix.build.platform }}
+
+  build-debian-src:
+    if: github.repository == 'meshtastic/firmware'
+    uses: ./.github/workflows/build_debian_src.yml
+    with:
+      series: UNRELEASED
+      build_location: local
+    secrets: inherit
+
+  package-pio-deps-native-tft:
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    uses: ./.github/workflows/package_pio_deps.yml
+    with:
+      pio_env: native-tft
+    secrets: inherit
+
+  test-native:
+    if: ${{ !contains(github.ref_name, 'event/') }}
+    uses: ./.github/workflows/test_native.yml
+
+  docker:
+    strategy:
+      fail-fast: false
+      matrix:
+        distro: [debian, alpine]
+        platform: [linux/amd64, linux/arm64, linux/arm/v7]
+        pio_env: [native, native-tft]
+        exclude:
+          - distro: alpine
+            platform: linux/arm/v7
+          - pio_env: native-tft
+            platform: linux/arm64
+          - pio_env: native-tft
+            platform: linux/arm/v7
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: ${{ matrix.distro }}
+      platform: ${{ matrix.platform }}
+      runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
+      pio_env: ${{ matrix.pio_env }}
+      push: false
+
+  gather-artifacts:
+    # trunk-ignore(checkov/CKV2_GHA_1)
+    permissions:
+      contents: write
+      pull-requests: write
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+    runs-on: ubuntu-latest
+    needs: [version, build]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - uses: actions/download-artifact@v7
+        with:
+          path: ./
+          pattern: firmware-${{matrix.arch}}-*
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Move files up
+        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+
+      - name: Repackage in single firmware zip
+        uses: actions/upload-artifact@v6
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          overwrite: true
+          path: |
+            ./firmware-*.bin
+            ./firmware-*.uf2
+            ./firmware-*.hex
+            ./firmware-*.zip
+            ./device-*.sh
+            ./device-*.bat
+            ./littlefs-*.bin
+            ./bleota*bin
+            ./Meshtastic_nRF52_factory_erase*.uf2
+          retention-days: 30
+
+      - uses: actions/download-artifact@v7
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-update.sh || true
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - name: Repackage in single elfs zip
+        uses: actions/upload-artifact@v6
+        with:
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          overwrite: true
+          path: ./*.elf
+          retention-days: 30
+
+      - uses: scruplelesswizard/comment-artifact@main
+        if: ${{ github.event_name == 'pull_request' }}
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+
+  release-artifacts:
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    outputs:
+      upload_url: ${{ steps.create_release.outputs.upload_url }}
+    needs:
+      - version
+      - gather-artifacts
+      - build-debian-src
+      - package-pio-deps-native-tft
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+
+      - name: Create release
+        uses: softprops/action-gh-release@v2
+        id: create_release
+        with:
+          draft: true
+          prerelease: true
+          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
+          tag_name: v${{ needs.version.outputs.long }}
+          body: |
+            Autogenerated by github action, developer should edit as required before publishing...
+
+      - name: Download source deb
+        uses: actions/download-artifact@v7
+        with:
+          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
+          merge-multiple: true
+          path: ./output/debian-src
+
+      - name: Download `native-tft` pio deps
+        uses: actions/download-artifact@v7
+        with:
+          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output/pio-deps-native-tft
+
+      - name: Zip Linux sources
+        working-directory: output
+        run: |
+          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
+          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
+
+      # For diagnostics
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Add Linux sources to GtiHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
+        run: |
+          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
+          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+  release-firmware:
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-artifacts, version]
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+
+      - uses: actions/download-artifact@v7
+        with:
+          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-update.sh || true
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - uses: actions/download-artifact@v7
+        with:
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./elfs
+
+      - name: Zip debug elfs
+        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
+
+      # For diagnostics
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Add bins and debug elfs to GitHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
+        run: |
+          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+  publish-firmware:
+    runs-on: ubuntu-24.04
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-firmware, version]
+    env:
+      targets: |-
+        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+
+      - uses: actions/download-artifact@v7
+        with:
+          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./publish
+
+      - name: Publish firmware to meshtastic.github.io
+        uses: peaceiris/actions-gh-pages@v4
+        env:
+          # On event/* branches, use the event name as the destination prefix
+          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
+        with:
+          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
+          external_repository: meshtastic/meshtastic.github.io
+          publish_branch: master
+          publish_dir: ./publish
+          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
+          keep_files: true
+          user_name: github-actions[bot]
+          user_email: github-actions[bot]@users.noreply.github.com
+          commit_message: ${{ needs.version.outputs.long }}
+          enable_jekyll: true

.github/workflows/models_issue_triage.yml

@@ -38,7 +38,7 @@ jobs:
 
       - name: Apply quality label if needed
         if: steps.quality.outputs.response != '' && steps.quality.outputs.response != 'ok'
-        uses: actions/github-script@v9
+        uses: actions/github-script@v8
         env:
           QUALITY_LABEL: ${{ steps.quality.outputs.response }}
         with:
@@ -80,7 +80,7 @@ jobs:
       # ─────────────────────────────────────────────────────────────────────────
       - name: Determine if completeness check should be skipped
         if: steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == ''
-        uses: actions/github-script@v9
+        uses: actions/github-script@v8
         id: check-skip
         with:
           script: |
@@ -134,7 +134,7 @@ jobs:
 
       - name: Process analysis result
         if: (steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == '') && steps.check-skip.outputs.should_skip != 'true' && steps.analysis.outputs.response != ''
-        uses: actions/github-script@v9
+        uses: actions/github-script@v8
         id: process
         env:
           AI_RESPONSE: ${{ steps.analysis.outputs.response }}
@@ -174,7 +174,7 @@ jobs:
 
       - name: Apply triage label
         if: steps.process.outputs.label != '' && steps.process.outputs.label != 'none'
-        uses: actions/github-script@v9
+        uses: actions/github-script@v8
         env:
           LABEL_NAME: ${{ steps.process.outputs.label }}
         with:
@@ -200,7 +200,7 @@ jobs:
 
       - name: Comment on issue
         if: steps.process.outputs.should_comment == 'true'
-        uses: actions/github-script@v9
+        uses: actions/github-script@v8
         env:
           COMMENT_BODY: ${{ steps.process.outputs.comment_body }}
         with:

.github/workflows/models_pr_triage.yml

@@ -22,7 +22,7 @@ jobs:
       # Step 1: Check if PR already has automation/type labels (skip if so)
       # ─────────────────────────────────────────────────────────────────────────
       - name: Check existing labels
-        uses: actions/github-script@v9
+        uses: actions/github-script@v8
         id: check-labels
         with:
           script: |
@@ -58,7 +58,7 @@ jobs:
 
       - name: Apply quality label if needed
         if: steps.check-labels.outputs.skip_all != 'true' && steps.quality.outputs.response != '' && steps.quality.outputs.response != 'ok'
-        uses: actions/github-script@v9
+        uses: actions/github-script@v8
         id: quality-label
         env:
           QUALITY_LABEL: ${{ steps.quality.outputs.response }}
@@ -113,7 +113,7 @@ jobs:
 
       - name: Apply type label
         if: steps.check-labels.outputs.skip_all != 'true' && steps.check-labels.outputs.has_type_label != 'true' && steps.classify.outputs.response != ''
-        uses: actions/github-script@v9
+        uses: actions/github-script@v8
         env:
           TYPE_LABEL: ${{ steps.classify.outputs.response }}
         with:

.github/workflows/package_obs.yml

@@ -18,7 +18,8 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
+  packages: write
 
 jobs:
   build-debian-src:
@@ -57,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -16,7 +16,8 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
+  packages: write
 
 jobs:
   pkg-pio-libdeps:
@@ -26,6 +27,8 @@ jobs:
         uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -51,19 +54,9 @@ jobs:
           PLATFORMIO_LIBDEPS_DIR: pio/libdeps
           PLATFORMIO_PACKAGES_DIR: pio/packages
           PLATFORMIO_CORE_DIR: pio/core
-          PLATFORMIO_SETTING_ENABLE_TELEMETRY: 0
-          PLATFORMIO_SETTING_CHECK_PLATFORMIO_INTERVAL: 3650
-          PLATFORMIO_SETTING_CHECK_PRUNE_SYSTEM_THRESHOLD: 10240
-
-      - name: Mangle platformio cache
-        # Add "1" to epoch-timestamps of all downloads in the cache.
-        # This is a hack to prevent internet access at build-time.
-        run: |
-          cp pio/core/.cache/downloads/usage.db pio/core/.cache/downloads/usage.db.bak
-          jq -c 'with_entries(.value |= (. | tostring + "1" | tonumber))' pio/core/.cache/downloads/usage.db.bak > pio/core/.cache/downloads/usage.db
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         with:
           name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
           overwrite: true

.github/workflows/package_ppa.yml

@@ -5,8 +5,6 @@ on:
     secrets:
       PPA_GPG_PRIVATE_KEY:
         required: true
-      PPA_SFTP_PRIVATE_KEY:
-        required: true
     inputs:
       ppa_repo:
         description: Meshtastic PPA to target
@@ -18,7 +16,8 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
+  packages: write
 
 jobs:
   build-debian-src:
@@ -29,7 +28,6 @@ jobs:
       build_location: ppa
 
   package-ppa:
-    if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
     runs-on: ubuntu-24.04
     needs: build-debian-src
     steps:
@@ -38,15 +36,17 @@ jobs:
         with:
           submodules: recursive
           path: meshtasticd
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Install deps
         shell: bash
         run: |
           sudo apt-get update -y --fix-missing
-          sudo apt-get install -y dput openssh-client
+          sudo apt-get install -y dput
 
       - name: Import GPG key
-        uses: crazy-max/ghaction-import-gpg@v7
+        uses: crazy-max/ghaction-import-gpg@v6
         with:
           gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
         id: gpg
@@ -60,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true
@@ -68,42 +68,7 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -lah
 
-      - name: Trust Launchpad's SSH key
+      - name: Publish with dput
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         run: |
-          mkdir -p ~/.ssh
+          dput ${{ inputs.ppa_repo }} meshtasticd_${{ steps.version.outputs.deb }}~${{ inputs.series }}_source.changes
-          ssh-keyscan -H ppa.launchpad.net >> ~/.ssh/known_hosts
-
-      - name: Setup dput config
-        env:
-          ppa_login: meshtasticorg
-        run: |
-          sudo tee /etc/meshtastic-dput.cf >/dev/null <<EOF
-          [ppa]
-          fqdn                    = ppa.launchpad.net
-          method                  = ftp
-          incoming                = ~%(ppa)s
-          login                   = anonymous
-
-          [ssh-ppa]
-          fqdn                    = ppa.launchpad.net
-          method                  = sftp
-          incoming                = ~%(ssh-ppa)s
-          login                   = ${ppa_login}
-          EOF
-
-      - name: Import SSH key
-        uses: webfactory/ssh-agent@v0.10.0
-        with:
-          ssh-private-key: ${{ secrets.PPA_SFTP_PRIVATE_KEY }}
-        id: ssh
-
-      - name: Publish with dput (sftp)
-        timeout-minutes: 30 # dput is terrible, sometimes runs 'forever'
-        env:
-          up_ppa_repo: ${{ inputs.ppa_repo }}
-          up_series: ${{ inputs.series }}
-          up_version: ${{ steps.version.outputs.deb }}
-        run: >
-          dput -c /etc/meshtastic-dput.cf
-          ssh-${up_ppa_repo}
-          meshtasticd_${up_version}~${up_series}_source.changes

.github/workflows/pr_enforce_labels.yml

@@ -13,7 +13,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Check for PR labels
-        uses: actions/github-script@v9
+        uses: actions/github-script@v8
         with:
           script: |
             const labels = context.payload.pull_request.labels.map(label => label.name);

.github/workflows/pr_tests.yml

@@ -50,7 +50,7 @@ jobs:
 
       - name: Download test artifacts
         if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}
           merge-multiple: true
@@ -177,7 +177,7 @@ jobs:
 
       - name: Comment test results on PR
         if: github.event_name == 'pull_request' && needs.native-tests.result != 'skipped'
-        uses: actions/github-script@v9
+        uses: actions/github-script@v8
         with:
           script: |
             const fs = require('fs');

.github/workflows/release_channels.yml

@@ -23,8 +23,8 @@ jobs:
         series:
           - jammy # 22.04 LTS
           - noble # 24.04 LTS
+          - plucky # 25.04
           - questing # 25.10
-          - resolute # 26.04 LTS
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: |-

.github/workflows/sec_sast_semgrep_cron.yml

@@ -33,7 +33,7 @@ jobs:
 
       # step 3
       - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         with:
           name: report.sarif
           overwrite: true

.github/workflows/stale_bot.yml

@@ -17,7 +17,7 @@ jobs:
 
     steps:
       - name: Stale PR+Issues
-        uses: actions/stale@v10.2.0
+        uses: actions/stale@v10.1.1
         with:
           days-before-stale: 45
           stale-issue-message: This issue has not had any comment or update in the last month. If it is still relevant, please post update comments. If no comments are made, this issue will be closed automagically in 7 days.

.github/workflows/test_native.yml

@@ -16,6 +16,8 @@ jobs:
     steps:
       - uses: actions/checkout@v6
         with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
           submodules: recursive
 
       - name: Setup native build
@@ -57,7 +59,7 @@ jobs:
         id: version
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}
@@ -70,6 +72,8 @@ jobs:
     steps:
       - uses: actions/checkout@v6
         with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
           submodules: recursive
 
       - name: Setup native build
@@ -90,7 +94,7 @@ jobs:
 
       - name: Save test results
         if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}
           overwrite: true
@@ -104,7 +108,7 @@ jobs:
           sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}
@@ -124,26 +128,29 @@ jobs:
     if: always()
     steps:
       - uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Get release version string
         run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v3.0.0
+        uses: dorny/test-reporter@v2.5.0
         with:
           name: PlatformIO Tests
           path: testreport.xml
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v7
         with:
           pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}
           path: code-coverage-report
@@ -156,7 +163,7 @@ jobs:
           genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report
 
       - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v6
         with:
           name: code-coverage-report-${{ steps.version.outputs.long }}
           path: code-coverage-report

.github/workflows/tests.yml

@@ -52,7 +52,7 @@ jobs:
           node-version: 24
 
       - name: Setup pnpm
-        uses: pnpm/action-setup@v6
+        uses: pnpm/action-setup@v4
         with:
           version: latest
 

.github/workflows/update_protobufs.yml

@@ -6,7 +6,7 @@ permissions: read-all
 jobs:
   update-protobufs:
     runs-on: ubuntu-latest
-    permissions: # Needed for peter-evans/create-pull-request.
+    permissions:
       contents: write
       pull-requests: write
     steps:

.gitignore

@@ -33,7 +33,6 @@ __pycache__
 *~
 
 venv/
-.venv/
 release/
 .vscode/extensions.json
 /compile_commands.json

.trunk/trunk.yaml

@@ -4,31 +4,31 @@ cli:
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.6
+      ref: v1.7.4
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.517
+    - checkov@3.2.500
-    - renovate@43.110.9
+    - renovate@43.4.0
     - prettier@3.8.1
-    - trufflehog@3.94.3
+    - trufflehog@3.93.0
     - yamllint@1.38.0
-    - bandit@1.9.4
+    - bandit@1.9.3
-    - trivy@0.69.3
+    - trivy@0.69.1
     - taplo@0.10.0
-    - ruff@0.15.9
+    - ruff@0.15.0
-    - isort@8.0.1
+    - isort@7.0.0
-    - markdownlint@0.48.0
+    - markdownlint@0.47.0
     - oxipng@10.1.0
-    - svgo@4.0.1
+    - svgo@4.0.0
-    - actionlint@1.7.12
+    - actionlint@1.7.10
     - flake8@7.3.0
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@26.3.1
+    - black@26.1.0
     - git-diff-check
-    - gitleaks@8.30.1
+    - gitleaks@8.30.0
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

Dockerfile

@@ -14,7 +14,7 @@ RUN apt-get update && apt-get install --no-install-recommends -y \
         curl wget g++ zip git ca-certificates pkg-config \
         libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
         libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
-        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev libsdl2-dev \
+        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware
@@ -53,7 +53,7 @@ USER root
 RUN apt-get update && apt-get --no-install-recommends -y install \
         libc-bin libc6 libgpiod3 libyaml-cpp0.8 libi2c0 libuv1t64 libusb-1.0-0-dev \
         liborcania2.3 libulfius2.7t64 libssl3t64 \
-        libx11-6 libinput10 libxkbcommon-x11-0 libsdl2-2.0-0 \
+        libx11-6 libinput10 libxkbcommon-x11-0 \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \

Dockerfile.test

@@ -1,26 +0,0 @@
-# Lightweight container for running native PlatformIO tests on non-Linux hosts
-FROM python:3.14-slim-trixie
-
-ENV DEBIAN_FRONTEND=noninteractive
-ENV PIP_ROOT_USER_ACTION=ignore
-
-# hadolint ignore=DL3008
-RUN apt-get update && apt-get install --no-install-recommends -y \
-        g++ git ca-certificates pkg-config \
-        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
-        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
-        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev libsdl2-dev \
-    && apt-get clean && rm -rf /var/lib/apt/lists/* \
-    && pip install --no-cache-dir platformio==6.1.19 \
-        && useradd --create-home --shell /usr/sbin/nologin meshtastic
-
-WORKDIR /firmware
-RUN chown -R meshtastic:meshtastic /firmware
-
-HEALTHCHECK --interval=30s --timeout=5s --start-period=10s --retries=3 \
-    CMD platformio --version || exit 1
-
-USER meshtastic
-
-# Run tests by default; override with docker run args for specific filters
-CMD ["platformio", "test", "-e", "coverage", "-v"]

alpine.Dockerfile

@@ -11,7 +11,7 @@ RUN apk --no-cache add \
         bash g++ libstdc++-dev linux-headers zip git ca-certificates libbsd-dev \
         libgpiod-dev yaml-cpp-dev bluez-dev \
         libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
-        libx11-dev libinput-dev libxkbcommon-dev sqlite-dev sdl2-dev \
+        libx11-dev libinput-dev libxkbcommon-dev sqlite-dev \
     && rm -rf /var/cache/apk/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware
@@ -42,7 +42,7 @@ USER root
 
 RUN apk --no-cache add \
         shadow libstdc++ libbsd libgpiod yaml-cpp libusb \
-        i2c-tools libuv libx11 libinput libxkbcommon sdl2 \
+        i2c-tools libuv libx11 libinput libxkbcommon \
     && rm -rf /var/cache/apk/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \

bin/check-all.sh

@@ -23,4 +23,4 @@ for BOARD in $BOARDS; do
 	CHECK="${CHECK} -e ${BOARD}"
 done
 
-pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=low --fail-on-defect=medium --fail-on-defect=high
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high

bin/config-dist.yaml

@@ -187,7 +187,6 @@ Logging:
   LogLevel: info # debug, info, warn, error
 #  TraceFile: /var/log/meshtasticd.json
 #  JSONFile: /packets.json # File location for JSON output of decoded packets
-#  JSONFileRotate: 60 # Rotate JSON file every N minutes, or 0 for no rotation
 #  JSONFilter: position # filter for packets to save to JSON file
 #  AsciiLogs: true     # default if not specified is !isatty() on stdout
 
@@ -215,4 +214,3 @@ General:
   AvailableDirectory: /etc/meshtasticd/available.d/
 #  MACAddress: AA:BB:CC:DD:EE:FF
 #  MACAddressSource: eth0
-#  APIPort: 4403

bin/config.d/OpenWRT/BananaPi-BPI-R4-sx1262.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: BananaPi-BPI-R4-sx1262
-  support: community
-  compatible:
-    - bananapi_bpi-r4 # OpenWrt target
-
 Lora:
   Module: sx1262  # BananaPi-BPI-R4 SPI via 26p GPIO Header
 ##  CS: 28

bin/config.d/OpenWRT/OpenWRT-One-mikroBUS-LR-IOT-CLICK.yaml

@@ -1,10 +1,4 @@
 ##  https://www.mikroe.com/lr-iot-click
-Meta:
-  name: OpenWRT One mikroBUS LR-IOT-CLICK
-  support: community
-  compatible:
-    - openwrt_one # OpenWrt target
-
 Lora:
   Module: lr1110  # OpenWRT ONE mikroBUS with LR-IOT-CLICK
 #  CS: 25

bin/config.d/OpenWRT/OpenWRT_One_mikroBUS_sx1262.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: OpenWRT One mikroBUS sx1262
-  support: community
-  compatible:
-    - openwrt_one # OpenWrt target
-
 Lora:
   Module: sx1262
   IRQ: 10

bin/config.d/README.md

@@ -1,28 +0,0 @@
-# meshtasticd configuration files
-
-This directory contains YAML configuration files for meshtasticd. Each file describes a specific hardware configuration, including the LoRa module and pin assignments. These configurations are used by meshtasticd to correctly interface with the hardware.
-
-## Metadata structure
-
-Each configuration file includes a `Meta` section that provides information about the configuration.
-This configuration is consumed by configuration-selection tools.
-
-```yaml
-Meta:
-  name: MeshAdv-Pi E22-900M30S # A unique identifier for this configuration.
-  support: community # community, official, or deprecated; determined by Meshtastic Leads.
-  compatible: # A list of compatible products or platforms.
-    - raspberry-pi
-```
-`name`: A unique identifier for the configuration, typically reflecting the hardware it supports.
-
-`support`: Indicates the level of support for this configuration. It can be one of the following:
-
-- `community`: Supported by the Meshtastic community. Meshtastic Members may not possess, or have not tested this configuration.
-- `official`: Fully supported by Meshtastic. Meshtastic Members have tested and verified this configuration.
-- `deprecated`: No longer recommended for deployment by Meshtastic.
-
-`compatible`: A list of compatible products or platforms that can use this configuration.
-This will vary depending on the intended use case / platform.
-Multiple compatible entries can be included. E.g. Armbian `BOARD` value or OpenWrt `TARGET` value.
-These tags can be consumed by different configuration-selection tools, filtering based upon their platform/etc.

bin/config.d/display-waveshare-1-44.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Waveshare 1.44inch LCD HAT
-  support: community
-  compatible:
-    - raspberry-pi
-
 ### Waveshare 1.44inch LCD HAT
 Display:
   Panel: ST7735S

bin/config.d/display-waveshare-2.8.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Waveshare 2.8inch LCD HAT
-  support: community
-  compatible:
-    - raspberry-pi
-
 Display:
 
 ### Waveshare 2.8inch RPi LCD

bin/config.d/femtofox/femtofox_LR1121_TCXO.yaml

@@ -1,10 +1,4 @@
 ---
-Meta:
-  name: Femtofox Ebyte E80-900M22S with TCXO
-  support: community
-  compatible:
-    - luckfox-pico-mini # Armbian
-
 Lora:
 ## Ebyte E80-900M22S
 ## This is a bit experimental
@@ -18,5 +12,9 @@ Lora:
   Busy: 22 #pin16 / GPIO54 1C6
   Reset: 25 #pin13 / GPIO57 1D1
 
+
   spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
   spiSpeed: 2000000
+  
+General:
+  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_SX1262_TCXO.yaml

@@ -1,10 +1,4 @@
 ---
-Meta:
-  name: Femtofox SX1262 TCXO
-  support: community
-  compatible:
-    - luckfox-pico-mini # Armbian
-
 Lora:
 ## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
 ## HT-RA62 (Has internal switching, but whatever)
@@ -22,3 +16,6 @@ Lora:
 #  TXen: bridge to DIO2 on E22 module
   spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
   spiSpeed: 2000000
+  
+General:
+  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_SX1262_XTAL.yaml

@@ -1,10 +1,4 @@
 ---
-Meta:
-  name: Femtofox SX1262 XTAL
-  support: community
-  compatible:
-    - luckfox-pico-mini # Armbian
-
 Lora:
 ## Ebyte E22-900MM22S with no external RF switching setup
 ## Waveshare SX126X XXXM, AI Thinker RA-01SH
@@ -22,3 +16,6 @@ Lora:
 #  TXen: bridge to DIO2 on E22 module
   spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
   spiSpeed: 2000000
+
+General:
+  MACAddressSource: eth0

bin/config.d/lora-Adafruit-RFM9x.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Adafruit RFM9x
-  support: deprecated
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: RF95  # Adafruit RFM9x
   Reset: 25

bin/config.d/lora-MeshAdv-900M30S.yaml

@@ -1,11 +1,5 @@
 # MeshAdv-Pi E22-900M30S
 # https://github.com/chrismyers2000/MeshAdv-Pi-Hat
-Meta:
-  name: MeshAdv-Pi E22-900M30S
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: sx1262
   CS: 21

bin/config.d/lora-MeshAdv-Mini-900M22S.yaml

@@ -1,11 +1,5 @@
 # MeshAdv Mini E22-900M22S
 # https://github.com/chrismyers2000/MeshAdv-Mini
-Meta:
-  name: MeshAdv Mini E22-900M22S
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: sx1262  # Ebyte E22-900M22S 
   CS: 8

bin/config.d/lora-RAK6421-13300-slot1.yaml

@@ -1,20 +1,11 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1
-  support: official
-  compatible:
-    - raspberry-pi
-
 Lora:
 
-  ### RAK13300 in Slot 1
+  ### RAK13300in Slot 1
   Module: sx1262
   IRQ: 22 #IO6
   Reset: 16 # IO4
   Busy: 24 # IO5
   # Ant_sw: 13 # IO3 
-  Enable_Pins:
-    - 12
-    - 13
   DIO3_TCXO_VOLTAGE: true
   DIO2_AS_RF_SWITCH: true
   spidev: spidev0.0

bin/config.d/lora-RAK6421-13300-slot2.yaml

@@ -1,17 +1,8 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 2
-  support: official
-  compatible:
-    - raspberry-pi
-
 Lora:
-  ### RAK13300 in Slot 2 pins
+  ### RAK13300in Slot 2 pins
   IRQ: 18 #IO6
   Reset: 24 # IO4
   Busy: 19 # IO5
   # Ant_sw: 23 # IO3 
-  Enable_Pins:
-    - 26
-    - 23
   spidev: spidev0.1
   # CS: 7

bin/config.d/lora-RAK6421-13302-slot1.yaml

@@ -1,22 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13302 Slot 1
-  support: official
-  compatible:
-    - raspberry-pi
-
-Lora:
-
-  ### RAK13302 in Slot 1
-  Module: sx1262
-  IRQ: 22 #IO6
-  Reset: 16 # IO4
-  Busy: 24 # IO5
-  # Ant_sw: 13 # IO3 
-  Enable_Pins:
-    - 12
-    - 13
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: 8
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-RAK6421-13302-slot2.yaml

@@ -1,18 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13302 Slot 2
-  support: official
-  compatible:
-    - raspberry-pi
-
-Lora:
-  ### RAK13302 in Slot 2 pins
-  IRQ: 18 #IO6
-  Reset: 24 # IO4
-  Busy: 19 # IO5
-  # Ant_sw: 23 # IO3 
-  Enable_Pins:
-    - 26
-    - 23
-  spidev: spidev0.1
-  # CS: 7
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-ecb41-pge-MeshAdv-900M30S.yaml

@@ -1,39 +0,0 @@
-# MeshAdv-Pi E22-900M30S
-# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
-Meta:
-  name: MeshAdv-Pi E22-900M30S
-  support: community
-  compatible:
-    - ebyte-ecb41-pge # Armbian
-
-Lora:
-  Module: sx1262
-  CS: # GPIO0_A1 (physical 40)
-    pin: 1
-    gpiochip: 0
-    line: 1
-  IRQ: # GPIO0_A3 (physical 36)
-    pin: 3
-    gpiochip: 0
-    line: 3
-  Busy: # GPIO0_A0 (physical 38)
-    pin: 0
-    gpiochip: 0
-    line: 0
-  Reset: # GPIO0_B4 (physical 12)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  TXen: # GPIO1_D1 (physical 33)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  RXen: # GPIO1_B3 (physical 32)
-    pin: 43
-    gpiochip: 1
-    line: 11
-  DIO3_TCXO_VOLTAGE: true
-  # Only for E22-900M33S:
-  # Limit the output power to 8 dBm
-  # SX126X_MAX_POWER: 8
-  spidev: spidev0.0

bin/config.d/lora-ecb41-pge-MeshAdv-Mini-900M22S.yaml

@@ -1,33 +0,0 @@
-# MeshAdv Mini E22-900M22S
-# https://github.com/chrismyers2000/MeshAdv-Mini
-Meta:
-  name: MeshAdv Mini E22-900M22S
-  support: community
-  compatible:
-    - ebyte-ecb41-pge # Armbian
-
-Lora:
-  Module: sx1262 # Ebyte E22-900M22S
-  CS: # GPIO0_B6 (physical 24, SPI1_CSN0)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  IRQ: # GPIO0_A3 (physical 36)
-    pin: 3
-    gpiochip: 0
-    line: 3
-  Busy: # GPIO0_A0 (physical 38)
-    pin: 0
-    gpiochip: 0
-    line: 0
-  Reset: # GPIO1_C3 (physical 18)
-    pin: 51
-    gpiochip: 1
-    line: 19
-  RXen: # GPIO1_B3 (physical 32)
-    pin: 43
-    gpiochip: 1
-    line: 11
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  spidev: spidev0.0

bin/config.d/lora-ecb41-pge-RAK6421-13300-slot1.yaml

@@ -1,38 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1
-  support: community # Promote when tested
-  compatible:
-    - ebyte-ecb41-pge # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_A5 (IO6, physical 15)
-    pin: 5
-    gpiochip: 0
-    line: 5
-  Reset: # GPIO0_A3 (IO4, physical 36)
-    pin: 3
-    gpiochip: 0
-    line: 3
-  Busy: # GPIO1_C3 (IO5, physical 18)
-    pin: 51
-    gpiochip: 1
-    line: 19
-  # Ant_sw: # GPIO1_C2 (IO3, physical 16)
-  #   pin: 50
-  #   gpiochip: 1
-  #   line: 18
-  Enable_Pins:
-    - pin: 43 # GPIO1_B3 (physical 32)
-      gpiochip: 1
-      line: 11
-    - pin: 57 # GPIO1_D1 (physical 33)
-      gpiochip: 1
-      line: 25
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: # GPIO0_B6 (SPI1_CSN0, physical 24)
-  #   pin: 14
-  #   gpiochip: 0
-  #   line: 14

bin/config.d/lora-ecb41-pge-RAK6421-13300-slot2.yaml

@@ -1,36 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 2
-  support: community # Promote when tested
-  compatible:
-    - ebyte-ecb41-pge # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_B4 (IO6, physical 12)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  Reset: # GPIO1_C3 (IO4, physical 18)
-    pin: 51
-    gpiochip: 1
-    line: 19
-  Busy: # GPIO0_B3 (IO5, physical 35)
-    pin: 11
-    gpiochip: 0
-    line: 11
-  # Ant_sw: # GPIO1_C2 (IO3, physical 16)
-  #   pin: 50
-  #   gpiochip: 1
-  #   line: 18
-  Enable_Pins:
-    - pin: 2 # GPIO0_A2 (physical 37)
-      gpiochip: 0
-      line: 2
-    - pin: 50 # GPIO1_C2 (physical 16)
-      gpiochip: 1
-      line: 18
-  spidev: spidev0.1
-  # CS: # GPIO0_A7 (SPI1_CSN1, physical 26)
-  #   pin: 7
-  #   gpiochip: 0
-  #   line: 7

bin/config.d/lora-ecb41-pge-RAK6421-13302-slot1.yaml

@@ -1,39 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13302 Slot 1
-  support: community # Promote when tested
-  compatible:
-    - ebyte-ecb41-pge # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_A5 (IO6, physical 15)
-    pin: 5
-    gpiochip: 0
-    line: 5
-  Reset: # GPIO0_A3 (IO4, physical 36)
-    pin: 3
-    gpiochip: 0
-    line: 3
-  Busy: # GPIO1_C3 (IO5, physical 18)
-    pin: 51
-    gpiochip: 1
-    line: 19
-  # Ant_sw: # GPIO1_C2 (IO3, physical 16)
-  #   pin: 50
-  #   gpiochip: 1
-  #   line: 18
-  Enable_Pins:
-    - pin: 43 # GPIO1_B3 (physical 32)
-      gpiochip: 1
-      line: 11
-    - pin: 57 # GPIO1_D1 (physical 33)
-      gpiochip: 1
-      line: 25
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: # GPIO0_B6 (SPI1_CSN0, physical 24)
-  #   pin: 14
-  #   gpiochip: 0
-  #   line: 14
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-ecb41-pge-RAK6421-13302-slot2.yaml

@@ -1,37 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13302 Slot 2
-  support: community # Promote when tested
-  compatible:
-    - ebyte-ecb41-pge # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_B4 (IO6, physical 12)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  Reset: # GPIO1_C3 (IO4, physical 18)
-    pin: 51
-    gpiochip: 1
-    line: 19
-  Busy: # GPIO0_B3 (IO5, physical 35)
-    pin: 11
-    gpiochip: 0
-    line: 11
-  # Ant_sw: # GPIO1_C2 (IO3, physical 16)
-  #   pin: 50
-  #   gpiochip: 1
-  #   line: 18
-  Enable_Pins:
-    - pin: 2 # GPIO0_A2 (physical 37)
-      gpiochip: 0
-      line: 2
-    - pin: 50 # GPIO1_C2 (physical 16)
-      gpiochip: 1
-      line: 18
-  spidev: spidev0.1
-  # CS: # GPIO0_A7 (SPI1_CSN1, physical 26)
-  #   pin: 7
-  #   gpiochip: 0
-  #   line: 7
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-ecb41-pge-waveshare-sxxx.yaml

@@ -1,30 +0,0 @@
-Meta:
-  name: Waveshare SX1262
-  support: deprecated
-  compatible:
-    - ebyte-ecb41-pge # Armbian
-
-Lora:
-  Module: sx1262  # Waveshare SX126X XXXM
-  DIO2_AS_RF_SWITCH: true
-  CS: # GPIO0_A1 (physical 40)
-    pin: 1
-    gpiochip: 0
-    line: 1
-  IRQ: # GPIO0_A3 (physical 36)
-    pin: 3
-    gpiochip: 0
-    line: 3
-  Busy: # GPIO0_A0 (physical 38)
-    pin: 0
-    gpiochip: 0
-    line: 0
-  Reset: # GPIO0_B4 (physical 12)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  SX126X_ANT_SW: # GPIO1_B2 (physical 31)
-    pin: 42
-    gpiochip: 1
-    line: 10
-  spidev: spidev0.0

bin/config.d/lora-hat-rak-6421-pi-hat.yaml

@@ -1,21 +1,11 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1 (Autoconf default)
-  support: official
-  compatible:
-    - raspberry-pi
-
 Lora:
 
-  ### RAK13300 in Slot 1
+  ### RAK13300in Slot 1
   Module: sx1262
   IRQ: 22 #IO6
   Reset: 16 # IO4
   Busy: 24 # IO5
-  Enable_Pins:
+  # Ant_sw: 13 # IO3 
-    - 12
-    - 13
   DIO3_TCXO_VOLTAGE: true
   DIO2_AS_RF_SWITCH: true
   spidev: spidev0.0
-  # GPIO_DETECT_PA: 13
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-lyra-picocalc-wio-sx1262.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Luckfox Lyra PicoCalc Wio LoRa SX1262
-  support: official
-  compatible:
-    - luckfox-lyra-plus # Armbian
-
 Lora:
   Module: sx1262
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-lyra-ultra_1w.yaml

@@ -1,23 +0,0 @@
-# For use with Armbian luckfox-lyra-ultra-w
-# Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
-# https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
-# 1 Watt Lyra Ultra hat
-Meta:
-  name: wehooper4 Luckfox Ultra 1W
-  support: community
-  compatible:
-    - luckfox-pico-ultra # Armbian
-    - luckfox-lyra-ultra # Armbian
-
-Lora:
-  Module: sx1262
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  CS: 10
-  IRQ: 5
-  Busy: 11
-  Reset: 9
-  RXen: 14
-
-  spidev: spidev0.0 #pins are (CS=10, CLK=8, MOSI=6, MISO=7)
-  spiSpeed: 2000000

bin/config.d/lora-lyra-ultra_2w.yaml

@@ -1,24 +0,0 @@
-# For use with Armbian luckfox-lyra-ultra-w
-# Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
-# https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
-# 2 Watt Lyra Ultra hat
-Meta:
-  name: wehooper4 Luckfox Ultra 2W
-  support: community
-  compatible:
-    - luckfox-pico-ultra # Armbian
-    - luckfox-lyra-ultra # Armbian
-
-Lora:
-  Module: sx1262
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  SX126X_MAX_POWER: 8
-  CS: 10
-  IRQ: 5
-  Busy: 11
-  Reset: 9
-  RXen: 14
-
-  spidev: spidev0.0 #pins are (CS=10, CLK=8, MOSI=6, MISO=7)
-  spiSpeed: 2000000

bin/config.d/lora-lyra-ws-raspberry-pi-pico-hat.yaml

@@ -1,31 +0,0 @@
-# For use with Armbian luckfox-lyra // luckfox-lyra-plus
-# Enable overlay 'luckfox-lyra-plus-spi0-cs0_rmio13-spidev' with armbian-config
-# Waveshare LoRa HAT for Raspberry Pi Pico
-# https://www.waveshare.com/wiki/Pico-LoRa-SX1262
-Meta:
-  name: Waveshare LoRa HAT for Raspberry Pi Pico
-  support: community
-  compatible:
-    - luckfox-lyra-plus # Armbian
-
-Lora:
-  Module: sx1262
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  spidev: spidev0.0
-  CS: # GPIO0_B5
-    pin: 13
-    gpiochip: 0
-    line: 13
-  IRQ: # GPIO1_C2
-    pin: 50
-    gpiochip: 1
-    line: 18
-  Busy: # GPIO0_B4
-    pin: 12
-    gpiochip: 0
-    line: 12
-  Reset: # GPIO0_A2
-    pin: 2
-    gpiochip: 0
-    line: 2

bin/config.d/lora-lyra-zero-MeshAdv-900M30S.yaml

@@ -1,39 +0,0 @@
-# MeshAdv-Pi E22-900M30S
-# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
-Meta:
-  name: MeshAdv-Pi E22-900M30S
-  support: community
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262
-  CS: # GPIO0_C2 (physical 40)
-    pin: 18
-    gpiochip: 0
-    line: 18
-  IRQ: # GPIO1_D1 (physical 36)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  Busy: # GPIO0_C1 (physical 38)
-    pin: 17
-    gpiochip: 0
-    line: 17
-  Reset: # GPIO0_B6 (physical 12)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  TXen: # GPIO1_C2 (physical 33)
-    pin: 50
-    gpiochip: 1
-    line: 18
-  RXen: # GPIO1_D2 (physical 32)
-    pin: 58
-    gpiochip: 1
-    line: 26
-  DIO3_TCXO_VOLTAGE: true
-  # Only for E22-900M33S:
-  # Limit the output power to 8 dBm
-  # SX126X_MAX_POWER: 8
-  spidev: spidev0.0

bin/config.d/lora-lyra-zero-MeshAdv-Mini-900M22S.yaml

@@ -1,33 +0,0 @@
-# MeshAdv Mini E22-900M22S
-# https://github.com/chrismyers2000/MeshAdv-Mini
-Meta:
-  name: MeshAdv Mini E22-900M22S
-  support: community
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262 # Ebyte E22-900M22S
-  CS: # GPIO0_B2_d (phys 24, RPi CE0)
-    pin: 10
-    gpiochip: 0
-    line: 10
-  IRQ: # GPIO1_D1_d (phys 36, RPi GPIO16)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  Busy: # GPIO0_C1_d (phys 38, RPi GPIO20)
-    pin: 17
-    gpiochip: 0
-    line: 17
-  Reset: # GPIO0_B4_d (phys 18, RPi GPIO24)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  RXen: # GPIO1_D2_d (phys 32, RPi GPIO12)
-    pin: 58
-    gpiochip: 1
-    line: 26
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  spidev: spidev0.0

bin/config.d/lora-lyra-zero-RAK6421-13300-slot1.yaml

@@ -1,38 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1
-  support: community # Promote when tested
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_A5 (IO6)
-    pin: 5
-    gpiochip: 0
-    line: 5
-  Reset: # GPIO1_D1 (IO4)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  Busy: # GPIO0_B4 (IO5)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  # Ant_sw: # GPIO1_C2 (IO3)
-  #   pin: 50
-  #   gpiochip: 1
-  #   line: 18
-  Enable_Pins:
-    - pin: 58 # GPIO1_D2
-      gpiochip: 1
-      line: 26
-    - pin: 50 # GPIO1_C2
-      gpiochip: 1
-      line: 18
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: # GPIO0_B2
-  #   pin: 10
-  #   gpiochip: 0
-  #   line: 10

bin/config.d/lora-lyra-zero-RAK6421-13300-slot2.yaml

@@ -1,36 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 2
-  support: community # Promote when tested
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_B6 (IO6)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  Reset: # GPIO0_B4 (IO4)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  Busy: # GPIO1_C0 (IO5)
-    pin: 48
-    gpiochip: 1
-    line: 16
-  # Ant_sw: # GPIO0_B5 (IO3)
-  #   pin: 13
-  #   gpiochip: 0
-  #   line: 13
-  Enable_Pins:
-    - pin: 51 # GPIO1_C3
-      gpiochip: 1
-      line: 19
-    - pin: 13 # GPIO0_B5
-      gpiochip: 0
-      line: 13
-  spidev: spidev0.1
-  # CS: # GPIO0_B1
-  #   pin: 9
-  #   gpiochip: 0
-  #   line: 9

bin/config.d/lora-lyra-zero-RAK6421-13302-slot1.yaml

@@ -1,39 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1
-  support: community # Promote when tested
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_A5 (IO6)
-    pin: 5
-    gpiochip: 0
-    line: 5
-  Reset: # GPIO1_D1 (IO4)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  Busy: # GPIO0_B4 (IO5)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  # Ant_sw: # GPIO1_C2 (IO3)
-  #   pin: 50
-  #   gpiochip: 1
-  #   line: 18
-  Enable_Pins:
-    - pin: 58 # GPIO1_D2
-      gpiochip: 1
-      line: 26
-    - pin: 50 # GPIO1_C2
-      gpiochip: 1
-      line: 18
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: # GPIO0_B2
-  #   pin: 10
-  #   gpiochip: 0
-  #   line: 10
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-lyra-zero-RAK6421-13302-slot2.yaml

@@ -1,37 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 2
-  support: community # Promote when tested
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_B6 (IO6)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  Reset: # GPIO0_B4 (IO4)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  Busy: # GPIO1_C0 (IO5)
-    pin: 48
-    gpiochip: 1
-    line: 16
-  # Ant_sw: # GPIO0_B5 (IO3)
-  #   pin: 13
-  #   gpiochip: 0
-  #   line: 13
-  Enable_Pins:
-    - pin: 51 # GPIO1_C3
-      gpiochip: 1
-      line: 19
-    - pin: 13 # GPIO0_B5
-      gpiochip: 0
-      line: 13
-  spidev: spidev0.1
-  # CS: # GPIO0_B1
-  #   pin: 9
-  #   gpiochip: 0
-  #   line: 9
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-lyra-zero-waveshare-sxxx.yaml

@@ -1,30 +0,0 @@
-Meta:
-  name: Waveshare SX1262
-  support: deprecated
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262  # Waveshare SX126X XXXM
-  DIO2_AS_RF_SWITCH: true
-  CS: # GPIO0_C2 (physical 40)
-    pin: 18
-    gpiochip: 0
-    line: 18
-  IRQ: # GPIO1_D1 (physical 36)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  Busy: # GPIO0_C1 (physical 38)
-    pin: 17
-    gpiochip: 0
-    line: 17
-  Reset: # GPIO0_B6 (physical 12)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  SX126X_ANT_SW: # GPIO1_B3 (physical 31)
-    pin: 43
-    gpiochip: 1
-    line: 11
-  spidev: spidev0.0

bin/config.d/lora-meshstick-1262.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Lora Meshstick SX1262
-  support: official
-  compatible:
-    - usb
-
 Lora:
   Module: sx1262
   CS: 0

bin/config.d/lora-ok3506-MeshAdv-900M30S.yaml

@@ -1,41 +0,0 @@
-# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
-
-# MeshAdv-Pi E22-900M30S
-# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
-Meta:
-  name: MeshAdv-Pi E22-900M30S
-  support: community
-  compatible:
-    - forlinx-ok3506-s12 # Armbian
-
-Lora:
-  Module: sx1262
-  CS: # GPIO0_B0 (physical 40)
-    pin: 8
-    gpiochip: 0
-    line: 8
-  IRQ: # GPIO3_B0 (physical 36)
-    pin: 104
-    gpiochip: 3
-    line: 8
-  Busy: # GPIO0_B1 (physical 38)
-    pin: 9
-    gpiochip: 0
-    line: 9
-  Reset: # GPIO0_B6 (physical 12)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  TXen: # GPIO0_A3 (physical 33)
-    pin: 3
-    gpiochip: 0
-    line: 3
-  RXen: # GPIO0_A2 (physical 32)
-    pin: 2
-    gpiochip: 0
-    line: 2
-  DIO3_TCXO_VOLTAGE: true
-  # Only for E22-900M33S:
-  # Limit the output power to 8 dBm
-  # SX126X_MAX_POWER: 8
-  spidev: spidev0.0

bin/config.d/lora-ok3506-MeshAdv-Mini-900M22S.yaml

@@ -1,35 +0,0 @@
-# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
-
-# MeshAdv Mini E22-900M22S
-# https://github.com/chrismyers2000/MeshAdv-Mini
-Meta:
-  name: MeshAdv Mini E22-900M22S
-  support: community
-  compatible:
-    - forlinx-ok3506-s12 # Armbian
-
-Lora:
-  Module: sx1262 # Ebyte E22-900M22S
-  CS: # GPIO0_C3 (physical 24, SPI0_CSN0)
-    pin: 19
-    gpiochip: 0
-    line: 19
-  IRQ: # GPIO3_B0 (physical 36)
-    pin: 104
-    gpiochip: 3
-    line: 8
-  Busy: # GPIO0_B1 (physical 38)
-    pin: 9
-    gpiochip: 0
-    line: 9
-  Reset: # GPIO3_A6 (physical 18)
-    pin: 102
-    gpiochip: 3
-    line: 6
-  RXen: # GPIO0_A2 (physical 32)
-    pin: 2
-    gpiochip: 0
-    line: 2
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  spidev: spidev0.0

bin/config.d/lora-ok3506-RAK6421-13300-slot1.yaml

@@ -1,40 +0,0 @@
-# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
-
-Meta:
-  name: RAK6421 + RAK13300 Slot 1
-  support: community # Promote when tested
-  compatible:
-    - forlinx-ok3506-s12 # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO3_B5 (IO6, physical 15)
-    pin: 109
-    gpiochip: 3
-    line: 13
-  Reset: # GPIO3_B0 (IO4, physical 36)
-    pin: 104
-    gpiochip: 3
-    line: 8
-  Busy: # GPIO3_A6 (IO5, physical 18)
-    pin: 102
-    gpiochip: 3
-    line: 6
-  # Ant_sw: # GPIO0_A3 (IO3, physical 33)
-  #   pin: 3
-  #   gpiochip: 0
-  #   line: 3
-  Enable_Pins:
-    - pin: 2 # GPIO0_A2 (physical 32)
-      gpiochip: 0
-      line: 2
-    - pin: 3 # GPIO0_A3 (physical 33)
-      gpiochip: 0
-      line: 3
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: # GPIO0_C3 (SPI0_CSN0, physical 24)
-  #   pin: 19
-  #   gpiochip: 0
-  #   line: 19

bin/config.d/lora-ok3506-RAK6421-13300-slot2.yaml

@@ -1,38 +0,0 @@
-# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
-
-Meta:
-  name: RAK6421 + RAK13300 Slot 2
-  support: community # Promote when tested
-  compatible:
-    - forlinx-ok3506-s12 # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_B6 (IO6, physical 12)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  Reset: # GPIO3_A6 (IO4, physical 18)
-    pin: 102
-    gpiochip: 3
-    line: 6
-  Busy: # GPIO0_B2 (IO5, physical 35)
-    pin: 10
-    gpiochip: 0
-    line: 10
-  # Ant_sw: # GPIO3_A7 (IO3, physical 16)
-  #   pin: 103
-  #   gpiochip: 3
-  #   line: 7
-  Enable_Pins:
-    - pin: 106 # GPIO3_B2 (physical 37)
-      gpiochip: 3
-      line: 10
-    - pin: 103 # GPIO3_A7 (physical 16)
-      gpiochip: 3
-      line: 7
-  spidev: spidev0.1
-  # CS: # GPIO0_B7 (SPI0_CSN1, physical 26)
-  #   pin: 15
-  #   gpiochip: 0
-  #   line: 15

bin/config.d/lora-ok3506-RAK6421-13302-slot1.yaml

@@ -1,41 +0,0 @@
-# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
-
-Meta:
-  name: RAK6421 + RAK13302 Slot 1
-  support: community # Promote when tested
-  compatible:
-    - forlinx-ok3506-s12 # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO3_B5 (IO6, physical 15)
-    pin: 109
-    gpiochip: 3
-    line: 13
-  Reset: # GPIO3_B0 (IO4, physical 36)
-    pin: 104
-    gpiochip: 3
-    line: 8
-  Busy: # GPIO3_A6 (IO5, physical 18)
-    pin: 102
-    gpiochip: 3
-    line: 6
-  # Ant_sw: # GPIO0_A3 (IO3, physical 33)
-  #   pin: 3
-  #   gpiochip: 0
-  #   line: 3
-  Enable_Pins:
-    - pin: 2 # GPIO0_A2 (physical 32)
-      gpiochip: 0
-      line: 2
-    - pin: 3 # GPIO0_A3 (physical 33)
-      gpiochip: 0
-      line: 3
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: # GPIO0_C3 (SPI0_CSN0, physical 24)
-  #   pin: 19
-  #   gpiochip: 0
-  #   line: 19
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-ok3506-RAK6421-13302-slot2.yaml

@@ -1,39 +0,0 @@
-# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
-
-Meta:
-  name: RAK6421 + RAK13302 Slot 2
-  support: community # Promote when tested
-  compatible:
-    - forlinx-ok3506-s12 # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_B6 (IO6, physical 12)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  Reset: # GPIO3_A6 (IO4, physical 18)
-    pin: 102
-    gpiochip: 3
-    line: 6
-  Busy: # GPIO0_B2 (IO5, physical 35)
-    pin: 10
-    gpiochip: 0
-    line: 10
-  # Ant_sw: # GPIO3_A7 (IO3, physical 16)
-  #   pin: 103
-  #   gpiochip: 3
-  #   line: 7
-  Enable_Pins:
-    - pin: 106 # GPIO3_B2 (physical 37)
-      gpiochip: 3
-      line: 10
-    - pin: 103 # GPIO3_A7 (physical 16)
-      gpiochip: 3
-      line: 7
-  spidev: spidev0.1
-  # CS: # GPIO0_B7 (SPI0_CSN1, physical 26)
-  #   pin: 15
-  #   gpiochip: 0
-  #   line: 15
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-ok3506-waveshare-sxxx.yaml

@@ -1,32 +0,0 @@
-# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
-
-Meta:
-  name: Waveshare SX1262
-  support: deprecated
-  compatible:
-    - forlinx-ok3506-s12 # Armbian
-
-Lora:
-  Module: sx1262  # Waveshare SX126X XXXM
-  DIO2_AS_RF_SWITCH: true
-  CS: # GPIO0_B0 (physical 40)
-    pin: 8
-    gpiochip: 0
-    line: 8
-  IRQ: # GPIO3_B0 (physical 36)
-    pin: 104
-    gpiochip: 3
-    line: 8
-  Busy: # GPIO0_B1 (physical 38)
-    pin: 9
-    gpiochip: 0
-    line: 9
-  Reset: # GPIO0_B6 (physical 12)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  SX126X_ANT_SW: # GPIO3_B3 (physical 31)
-    pin: 107
-    gpiochip: 3
-    line: 11
-  spidev: spidev0.0

bin/config.d/lora-piggystick-lr1121.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Lora Meshstick SX1262
-  support: community
-  compatible:
-    - usb
-
 Lora:
   Module: lr1121
   CS: 0

bin/config.d/lora-pinedio-usb-sx1262.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Pinedio USB SX1262
-  support: deprecated
-  compatible:
-    - usb
-
 Lora:
   Module: sx1262
   CS: 0 

bin/config.d/lora-raxda-rock2f-starter-edition-hat.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: raxda-rock2f-starter-edition-hat
-  support: community
-  compatible:
-    - rock-2f # Armbian
-
 Lora:
 
 ### Raxda Rock 2F running Armbian Linux 6.1.99-vendor-rk35xx

bin/config.d/lora-starter-edition-sx1262-i2c.yaml

@@ -1,11 +1,5 @@
 # https://www.waveshare.com/core1262-868m.htm
 # https://github.com/markbirss/lora-starter-edition-sx1262-i2c
-Meta:
-  name: lora-starter-edition-sx1262-i2c
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: sx1262  # Starter Edition SX1262 I2C Raspberry Pi HAT
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-usb-meshstick-1262.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: meshstick-1262
-  support: official
-  compatible:
-    - usb
-
 Lora:
   Module: sx1262
   CS: 0

bin/config.d/lora-usb-meshtoad-e22.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: meshtoad-e22
-  support: official
-  compatible:
-    - usb
-
 Lora:
   Module: sx1262
   CS: 0

bin/config.d/lora-usb-umesh-1262-30dbm.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: umesh-1262-30dbm
-  support: community
-  compatible:
-    - clockwork-uconsole
-
 Lora:
   Module: sx1262
   CS: 0
@@ -19,7 +13,8 @@ Lora:
 #  USB_Serialnum: 12345678
   SX126X_MAX_POWER: 22
 # Reduce output power to improve EMI
-  TX_GAIN_LORA: [12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7]
+  NUM_PA_POINTS: 22
+  TX_GAIN_LORA: 12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7
 # Note: This module integrates an additional PA to achieve higher output power.
 # The 'power' parameter here does not represent the actual RF output.
 # TX_GAIN_LORA defines the gain offset applied at each SX1262 input power step (1–22 dBm).

bin/config.d/lora-usb-umesh-1268-30dbm.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: umesh-1268-30dbm
-  support: community
-  compatible:
-    - clockwork-uconsole
-
 Lora:
   Module: sx1268
   CS: 0
@@ -19,7 +13,8 @@ Lora:
 #  USB_Serialnum: 12345678
   SX126X_MAX_POWER: 22
 # Reduce output power to improve EMI
-  TX_GAIN_LORA: [12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7]
+  NUM_PA_POINTS: 22
+  TX_GAIN_LORA: 12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7
 # Note: This module integrates an additional PA to achieve higher output power.
 # The 'power' parameter here does not represent the actual RF output.
 # TX_GAIN_LORA defines the gain offset applied at each SX1262 input power step (1–22 dBm).

bin/config.d/lora-waveshare-sxxx.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Waveshare SX1262
-  support: deprecated
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: sx1262  # Waveshare SX126X XXXM
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-ws-raspberry-pi-pico-to-rpi-adapter.yaml

@@ -1,12 +1,5 @@
 # https://www.waveshare.com/pico-lora-sx1262-868m.htm
 # https://github.com/markbirss/lora-ws-raspberry-pi-pico-to-rpi-adapter
-
-Meta:
-  name: ws-raspberry-pico-to-rpi-adapter
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: sx1262  # Waveshare Raspberry Pi Pico to Raspberry Pi HAT Adapter
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-ws-raspberry-pico-to-orangepi-03.yaml

@@ -15,12 +15,6 @@
 #   5     CS          24
 #   26    DIO1/IRQ    26
 
-Meta:
-  name: ws-raspberry-pico-to-orangepi-03
-  support: community
-  compatible:
-    - orange-pi-zero-3 # Armbian
-
 Lora:
   Module: sx1262  # Waveshare Raspberry Pico Lora module
   DIO2_AS_RF_SWITCH: true

bin/generate_ci_matrix.py

@@ -43,7 +43,7 @@ for pio_env in pio_envs:
   env = {
     "ci": {"board": pio_env, "platform": env_platform},
     "board_level": cfg.get(f"env:{pio_env}", "board_level", default=None),
-    "board_check": cfg.get(f"env:{pio_env}", "board_check", default="false").strip().lower() == "true",
+    "board_check": bool(cfg.get(f"env:{pio_env}", "board_check", default=False)),
   }
   all_envs.append(env)
 

bin/generate_release_notes.py

@@ -1,31 +1,25 @@
 #!/usr/bin/env python3
-"""Generate release notes from the actual release commit range."""
+"""
+Generate release notes from merged PRs on develop and master branches.
+Categorizes PRs into Enhancements and Bug Fixes/Maintenance sections.
+"""
 
-import argparse
-import json
-import re
 import subprocess
+import re
+import json
 import sys
+from datetime import datetime
 
 
-def get_last_release_tag(compare_ref, exclude_tag=None):
+def get_last_release_tag():
-    """Get the most recent version tag merged into compare_ref."""
+    """Get the most recent release tag."""
     result = subprocess.run(
-        ["git", "tag", "--merged", compare_ref, "--sort=-version:refname", "v*"],
+        ["git", "describe", "--tags", "--abbrev=0"],
         capture_output=True,
         text=True,
         check=True,
     )
-
+    return result.stdout.strip()
-    for line in result.stdout.splitlines():
-        candidate = line.strip()
-        if not candidate:
-            continue
-        if exclude_tag and candidate == exclude_tag:
-            continue
-        return candidate
-
-    raise subprocess.CalledProcessError(result.returncode, result.args, output=result.stdout, stderr=result.stderr)
 
 
 def get_tag_date(tag):
@@ -39,18 +33,18 @@ def get_tag_date(tag):
     return result.stdout.strip()
 
 
-def get_merged_prs_in_range(tag, compare_ref):
+def get_merged_prs_since_tag(tag, branch):
-    """Get all merged PRs in the git range between tag and compare_ref."""
+    """Get all merged PRs since the given tag on the specified branch."""
+    # Get commits since tag on the branch - look for PR numbers in parentheses
     result = subprocess.run(
         [
             "git",
             "log",
-            f"{tag}..{compare_ref}",
+            f"{tag}..origin/{branch}",
             "--oneline",
         ],
         capture_output=True,
         text=True,
-        check=True,
     )
 
     prs = []
@@ -71,25 +65,6 @@ def get_merged_prs_in_range(tag, compare_ref):
     return prs
 
 
-def parse_args():
-    """Parse CLI arguments."""
-    parser = argparse.ArgumentParser(
-        description="Generate release notes from the actual release commit range."
-    )
-    parser.add_argument("new_version", help="Version that will be tagged for this release")
-    parser.add_argument(
-        "--base-tag",
-        dest="base_tag",
-        help="Existing version tag to diff from. Defaults to the latest version tag merged into the compare ref.",
-    )
-    parser.add_argument(
-        "--compare-ref",
-        default="HEAD",
-        help="Git ref to diff to. Defaults to HEAD.",
-    )
-    return parser.parse_args()
-
-
 def get_pr_details(pr_number):
     """Get PR details from GitHub API via gh CLI."""
     try:
@@ -293,28 +268,28 @@ def get_new_contributors(pr_details_list, tag, repo="meshtastic/firmware"):
 
 
 def main():
-    args = parse_args()
+    if len(sys.argv) < 2:
-    new_version = args.new_version
+        print("Usage: generate_release_notes.py <new_version>", file=sys.stderr)
-    compare_ref = args.compare_ref
+        sys.exit(1)
-    current_tag = f"v{new_version}"
+
+    new_version = sys.argv[1]
 
     # Get last release tag
     try:
-        last_tag = args.base_tag or get_last_release_tag(compare_ref, exclude_tag=current_tag)
+        last_tag = get_last_release_tag()
     except subprocess.CalledProcessError:
         print("Error: Could not find last release tag", file=sys.stderr)
         sys.exit(1)
 
-    print(
+    # Collect PRs from both branches
-        f"Resolved release note range: {last_tag}..{compare_ref}",
+    all_pr_numbers = set()
-        file=sys.stderr,
-    )
 
-    try:
+    for branch in ["develop", "master"]:
-        all_pr_numbers = set(get_merged_prs_in_range(last_tag, compare_ref))
+        try:
-    except subprocess.CalledProcessError as e:
+            prs = get_merged_prs_since_tag(last_tag, branch)
-        print(f"Error: Could not get PRs for range {last_tag}..{compare_ref}: {e}", file=sys.stderr)
+            all_pr_numbers.update(prs)
-        sys.exit(1)
+        except Exception as e:
+            print(f"Warning: Could not get PRs from {branch}: {e}", file=sys.stderr)
 
     # Get details for all PRs
     enhancements = []

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,15 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.22" date="2026-04-06">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.22</url>
-    </release>
-    <release version="2.7.21" date="2026-03-11">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.21</url>
-    </release>
-    <release version="2.7.20" date="2026-02-11">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.20</url>
-    </release>
     <release version="2.7.19" date="2026-01-22">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.19</url>
     </release>

bin/test-native-docker.sh

@@ -1,44 +0,0 @@
-#!/usr/bin/env bash
-# Run native PlatformIO tests inside Docker (for macOS / non-Linux hosts).
-#
-# Usage:
-#   ./bin/test-native-docker.sh                          # run all native tests
-#   ./bin/test-native-docker.sh -f test_transmit_history  # run specific test filter
-#   ./bin/test-native-docker.sh --rebuild                 # force rebuild the image
-#
-set -euo pipefail
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
-ROOT_DIR="$(cd "$SCRIPT_DIR/.." && pwd)"
-IMAGE_NAME="meshtastic-native-test"
-
-REBUILD=false
-EXTRA_ARGS=()
-
-for arg in "$@"; do
-    if [[ "$arg" == "--rebuild" ]]; then
-        REBUILD=true
-    else
-        EXTRA_ARGS+=("$arg")
-    fi
-done
-
-if $REBUILD || ! docker image inspect "$IMAGE_NAME" >/dev/null 2>&1; then
-    echo "Building test image (first run may take a few minutes)..."
-    docker build -t "$IMAGE_NAME" -f "$ROOT_DIR/Dockerfile.test" "$ROOT_DIR"
-fi
-
-# Disable BUILD_EPOCH to avoid full rebuilds between test runs (matches CI)
-sed_cmd='s/-DBUILD_EPOCH=$UNIX_TIME/#-DBUILD_EPOCH=$UNIX_TIME/'
-
-# Default: run all tests. Pass extra args (e.g. -f test_transmit_history) through.
-if [[ ${#EXTRA_ARGS[@]} -eq 0 ]]; then
-    CMD=("platformio" "test" "-e" "coverage" "-v")
-else
-    CMD=("platformio" "test" "-e" "coverage" "-v" "${EXTRA_ARGS[@]}")
-fi
-
-exec docker run --rm \
-    -v "$ROOT_DIR:/src:ro" \
-    "$IMAGE_NAME" \
-    bash -c "rm -rf /tmp/fw-test && cp -a /src /tmp/fw-test && cd /tmp/fw-test && sed -i '${sed_cmd}' platformio.ini && ${CMD[*]}"

boards/heltec_mesh_node_t096.json

@@ -1,54 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x2886", "0x1667"]
-    ],
-    "usb_product": "HT-n5262G",
-    "mcu": "nrf52840",
-    "variant": "heltec_mesh_node_t096",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Heltec nrf (Adafruit BSP)",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://heltec.org/",
-  "vendor": "Heltec"
-}

boards/me25ls01-4y10td.json

@@ -32,8 +32,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
+    "svd_path": "nrf52840.svd"
-    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "Minesemi ME25LS01",

boards/meshlink.json

@@ -33,8 +33,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
+    "svd_path": "nrf52840.svd"
-    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "MeshLink",

boards/mini-epaper-s3.json

@@ -1,40 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "partitions": "default.csv"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_ESP32S3_DEV",
-      "-DARDUINO_USB_MODE=1",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "LilyGo Mini-Epaper-S3 (4 MB Flash, 2MB PSRAM)",
-  "upload": {
-    "flash_size": "4MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 4194304,
-    "require_upload_port": true,
-    "speed": 460800
-  },
-  "url": "https://www.lilygo.cc",
-  "vendor": "LilyGo"
-}

boards/minimesh_lite.json

@@ -31,8 +31,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
+    "svd_path": "nrf52840.svd"
-    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "Minimesh Lite",

boards/ms24sf1.json

@@ -32,8 +32,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
+    "svd_path": "nrf52840.svd"
-    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "MINEWSEMI_MS24SF1_SX1262",

boards/nano-g2-ultra.json

@@ -32,8 +32,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
+    "svd_path": "nrf52840.svd"
-    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "BQ nRF52840",

boards/promicro-nrf52840.json

@@ -33,8 +33,7 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
+    "svd_path": "nrf52840.svd"
-    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "ProMicro compatible nRF52840",

boards/station-g2.json

@@ -8,7 +8,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=0"
     ],