Compare commits

..
52 Commits
Author SHA1 Message Date
Thomas Göttgens 68f8f3219c add presets to onscreen menu for easy testing. 2025-11-19 22:31:18 +01:00
Thomas Göttgens cd1cc032ed Add a new frequency range for EU SRD area with adaptive DC 2025-11-19 22:31:18 +01:00
github-actions[bot]andthebentern f9433a31d1 Automated version bumps (#8684)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
2025-11-19 12:13:28 -06:00
viricandTom Fifield d18f3f7a65 Allow deepsleep in rak4630 and make it restart well when power comes back (#7882)
* Make RAK4631 nodes power back on deep sleep

The devices will hang if the VBAT goes under 1.7V (Brown-out reset) and
they will never come back unless power supply goes completely off.

This kills unattended nodes.

Using the SystemOff the LPCOMP we can get the nodes back again when
power comes back, even if VBAT goes under 1.7V, which moreover is more
unlikely because the device is off.

* Adding support for heltec t114

And moved particularities to variant.h

* Remove old cpp comment that belongs to variant.h

It was a leftover.

* Trunk fix

---------

Co-authored-by: Tom Fifield <tom@tomfifield.net>
2025-11-18 11:23:39 -06:00
Jonathan BennettandTom Fifield 6c09cf9d3d Gps reset detect (#8302)
* Properly format timestamp in log message

* Better formatting of GPS_DEBUG logging in gps probe

* Reset GPS after serial speed change, and look for magic string to identify chip

* Add UC6580 to boot message detection, for Heltec Tracker

* Add L76K detect from boot string, for Heltec-v4

* Slightly more useful GPS debugging

* Back out detection of L76K via startup messages.

* Ignore PIN_GPS_RESET = -1 and rename passive_detect array.

---------

Co-authored-by: Tom Fifield <tom@tomfifield.net>
2025-11-18 15:04:44 +08:00
omgbebebe 79a91578b7 mqtt: do not try to send packets when it disconnected (#8658) 2025-11-17 16:54:02 -06:00
Jason P 17cd83085b Remove gating for Display Options (#8651) 2025-11-16 22:05:24 -06:00
Chloe Bethel b7bdcbe43e Address review comments 2025-11-16 17:18:27 -06:00
Chloe Bethel df063f40ff Try to look for a config file based on the HAT vendor/product for autoconfig 2025-11-16 17:18:27 -06:00
Jason P 84bb1e33a6 Add code for preserving favorites, also move to Home screen before reseting (#8647) 2025-11-16 14:18:16 -06:00
Jason PandCopilot 955347bf50 Remove fixed scaling in Digital Clock (#8620)
* Update digital clock draw to auto scale to correct size; no more fixed scaling

* Static scale calcuation to improve performance

* Update src/graphics/draw/ClockRenderer.cpp

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* Back off for width or height exceeds

* Fixes for some calcuations

---------

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
2025-11-16 08:42:51 -06:00
Dane EvansandBen Meadors 4284fc2aec Feat/6704 neighbor info on demand (#8523)
* full thing. works

* works

* minimal changes

* roll back previous changes, move to using the alloc() overrride

* clean up comments

* format

* run clang-format manually.
Trunk may be the absolute worst formatter in existance

* format on WSL to fix trunks awfulness

* add a 3 minute cooldown to prevent messages going back and forth

* add ignoring the dummy neighbor.

* fix or.

* fix spelling, increase logging

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2025-11-15 19:49:46 -06:00
github-actions[bot]andthebentern 034aaa376a Automated version bumps (#8626)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
2025-11-14 06:09:25 -06:00
Andrik45719 7212fb9caa Fix null pointer dereference in radio chip region check (#8613) 2025-11-11 10:00:08 -06:00
Jason B. CoxandBen Meadors 4118e1c0f6 Cleanup unnecessary global dereferencing in CryptoEngine (#8611)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2025-11-10 20:19:15 -06:00
Thomas Göttgens a62fed3289 Merge pull request #8610 from meshtastic/fix-ldro
Change RadioLib to commit zip til 7.4.1+ is released
2025-11-10 22:31:03 +01:00
Thomas Göttgens 7d2744fae0 Change RadioLib to commit zip til 7.4.1+ is released
fixes regression for SX127x chips per @GUVWAF
2025-11-10 16:16:24 +01:00
Chloe Bethel beaebda4de stm32wl: Wrap and remove some functions that pull in large amounts of code/data to claw back even more flash space (#8609) 2025-11-10 09:08:04 -06:00
TomandTom 36c2178570 Update to Pro-micro variants (#8600)
* Update to Pro-micro variants

Schematic updated
Xtal variant removed
Extra module added to list
Extra explanation added to readme.

* Fix markdown formatting in readme.md

* Fix formatting in readme.md for RF switch section

---------

Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com>
2025-11-09 09:24:03 -06:00
Quency-DandBen Meadors 50f9be9a2b Add the Heltec v4 expansion box. (#8539)
* Add the Heltec v4 expansion box.

* Change heltec-v4-oled to heltec-v4.

* Add touchscreen to I2C scanning.

* Add reset and busy pins to the ST7789.

* Ignore the touch interrupt pin and extend the sleep time to 1 hour.

* Remove the default sleep function.

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2025-11-08 06:47:24 -06:00
Benjamin Faershtein 8fe98db5dd Drop PKI acks if there is no downlink on MQTTClientProxy (#8580)
* Discard everything if downlink isn't on

* Drop PKI packets when downlink not on
2025-11-08 05:59:45 -06:00
531cad5e88 Add API types, state, and log message in Debug screen. Added persistent "Connected" icon (#8576)
* Add API types, state, and log message in Debug screen

* un-goober the API state tracking

* Set the SerialConsole api_type

* Add api_type for Ethernet

* Remove API state debugging code

* Update wording for client connection states

* Improve string width for smaller screen devices

* Reserve space on navigation bar to fit link indicator

* Add persistent Connected icon to screen

* Connect System frame to ensure text doesn't overflow

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
2025-11-07 15:03:56 -06:00
Benjamin Faershtein 77e0a24838 Discard everything if downlink isn't on (#8578) 2025-11-06 21:01:15 -06:00
Ford Jones 6cad393688 Persist favourites on NodeDB reset (#8292)
* Conditionally delete favourited nodes on reset

* trunk fmt

* Fix equality check, use existing macro for role validation

* Extend favourite persistence setting to devices of all roles

* Refactor: Decoupled role/config check and set role defaults appropriately

* Use American-English spelling

* Use existing reference

* Convert reset to bool, regen protos

* Add optional arg to nodedb_reset in favor of additional device setting

* Use correct proto commit ID

* Regen protos

* Log preservation status

* Pull latest from master
2025-11-06 16:06:37 -06:00
Ben Meadors 0725b46744 Merge branch 'master' into develop 2025-11-06 07:14:51 -06:00
Mike RobbinsandBen Meadors 6a6c409b9a addFromContact: Don't auto-favorite when CLIENT_BASE; don't update last_heard unless CLIENT_BASE (#8495)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2025-11-06 07:10:20 -06:00
Wessel 7b14b173d9 Store hop/mqtt/transport mechanism info in S&F (#8560)
Before this, all messages received when enabling S&F server would return
Hops away: -1
2025-11-06 06:27:25 -06:00
Jason P 3e40d7896b Revert "nrf52: add watchdog (#8485)" (#8554)
This reverts commit 83954293d8.
2025-11-05 10:07:28 -06:00
03f69b3b77 Update RadioLib to v7.4.0 (#8456)
* fix strlcpy compile error in Ubuntu 22.04 (#8520)

* fix strlcpy error in Ubuntu 20.04

* add to native after tests

* Add support for RAK_WISMESH_TAP_V2 and RAK3401 hardware models (#8537)

* Update RadioLib to v7.4.0

---------

Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
Co-authored-by: Daniel.Cao <144674500+DanielCao0@users.noreply.github.com>
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
2025-11-04 06:04:56 -06:00
Sebastian KuzminskyandBen Meadors 83954293d8 nrf52: add watchdog (#8485)
* nrf52: add watchdog

Main thread only for now.

* bump framework-arduinoadafruitnrf52 to pick up new wdt support

* clang-format the new parts of main-nrf52.cpp

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2025-11-04 05:35:44 -06:00
Austin 91621427f1 Packaging: Add libbsd where needed (#8533) 2025-11-03 17:56:31 -06:00
Ben Meadors 8d1b9c9dce Merge pull request #8531 from meshtastic/master
Master
2025-11-03 15:56:42 -06:00
Ben Meadors 538c05ad6c Revert "ADD - heltec v4 support to device install bat (#8528)" (#8532)
This reverts commit 468247fb94.
2025-11-03 15:56:23 -06:00
Quency-D f6370bea8f Add the identification code for the DA217 triaxial accelerometer. (#8526) 2025-11-04 07:18:52 +11:00
Melon 468247fb94 ADD - heltec v4 support to device install bat (#8528) 2025-11-04 07:14:24 +11:00
github-actions[bot]andthebentern 3ae7e54681 Automated version bumps (#8527)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
2025-11-03 10:14:08 -06:00
Dmitry Ivanishkin 0a124b7f3d Fix SHT4x detection by reading unique serial nubmer (#8525) 2025-11-03 08:17:52 -06:00
Jonathan Bennett 7def82595d Rename screen options to display options and add units chooser (#8517)
* Rename screen options to display options and add units chooser

* Add InitialSelected to DisplayUnits_menu
2025-11-02 21:30:41 -06:00
Melon 3a67204f6d Update device-install.sh to support heltec-v4 (#8509)
* Update device-install.sh

* Update device-install.sh
2025-11-02 06:09:15 -06:00
Jonathan Bennett d1b66782d1 Hide nodes that don't have position in the distance and bearings nodelists (#8518) 2025-11-02 05:57:15 -06:00
Xavier horwoodandTom Fifield 718fd118b0 Add IPv6 Support for esp32 (#6866)
* Update Default.h

* Update NodeDB.cpp

* Update WiFiAPClient.cpp

* Update userPrefs.jsonc

* set ipv6 to off by default

* Trunk fix

---------

Co-authored-by: Tom Fifield <tom@tomfifield.net>
2025-11-02 09:25:59 +11:00
Ben Meadors 75f7ded12c Merge pull request #8513 from meshtastic/master
Master backmerge
2025-11-01 17:17:14 -05:00
pa0lin082andTom Fifield 7f78a624cd Add support for Bh1750 Light Sensor (#8376)
* regenerate protobuf with bh1750 TelemetrySensorType

* Added wollewald/BH1750_WE@^1.1.10 dependecy

* Added support for BH1750 during i2C detection

* Create new BH1750Sensor and added in EnvironmentTelemetry

* clean code

* Attempt to fix protobuf include

---------

Co-authored-by: Tom Fifield <tom@tomfifield.net>
2025-11-01 09:40:36 +11:00
shortwavesurfer2009andHarukiToreda 17324fa725 adjust battery curve (#8137)
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
2025-11-01 09:39:30 +11:00
Marius Faber 001654e90a Add basic LR1121 support for T-Beam S3, full support needs #4775 fixed (#8349) 2025-11-01 09:38:37 +11:00
Andrew Yong 4f817d69eb fix(wio-e5): Fix LED state inversion (#8500)
Wio-E5 currently has LED appearing to be steadily on, due to incorrect LED_STATE_ON (it is actually briefly flashing off, but visually it is hard to perceive).

Wio-E5 has LED between GPIO PB5 and VCC, so LED_STATE_ON should be 0 for LED to blink correctly. With this commit, it is now flashing correctly.

Refer to schematics:

* [Wio-E5 Development Kit](https://files.seeedstudio.com/products/113990934/LoRa-E5%20Dev%20Board%20v1.0.pdf)
* [Wio-E5 mini](https://files.seeedstudio.com/products/113990939/LoRa-E5%20mini%20v1.0.pdf)

Signed-off-by: Andrew Yong <me@ndoo.sg>
2025-10-31 05:55:07 -05:00
Chloe Bethel de83b448f9 Force stdout to be line buffered - this fixes logs ending early if meshtasticd crashes (#8499) 2025-10-31 05:54:35 -05:00
Ixitxachitl c145be8e05 Refactor emote dimensions to 16x16 pixels (#8493)
Updated the dimensions of various emotes in emotes.h from 30x30 or 25x25 to 16x16 pixels for consistency and optimization. Added new emotes including heart_smile, Heart_eyes, and others, all with the same 16x16 size. This change improves memory usage and aligns with the design specifications for smaller emotes.
2025-10-31 21:20:29 +11:00
Clive Blackledge 28f53d132a refactor: change node count variables from uint8_t to uint16_t (#8478)
This is a non-breaking change that increases the internal representation
of node counts from uint8_t (max 255) to uint16_t (max 65535) to support
larger mesh networks, particularly on ESP32-S3 devices with PSRAM.

Changes:
- NodeStatus: numOnline, numTotal, lastNumTotal (uint8_t -> uint16_t)
- ProtobufModule: numOnlineNodes (uint8_t -> uint16_t)
- MapApplet: loop counters changed to size_t for consistency with getNumMeshNodes()
- NodeStatus: Fixed log format to use %u for unsigned integers

Note: Default class methods keep uint32_t for numOnlineNodes parameter
to match the public API and allow flexibility, even though internal node
counts use uint16_t (max 65535 nodes).

This change does NOT affect protobuf definitions, maintaining wire
compatibility with existing clients and devices.
2025-10-28 15:32:08 -05:00
Erayd f045ca2303 Fix type to ensure correct alignment; saves 4B per entry (#8465) 2025-10-27 06:05:59 -05:00
Tom Fifield b6830a68a0 Migrate test workflow to use Node 24 (#8466)
Node 24 is now the common version amoungst all of our actions.
2025-10-27 19:47:34 +11:00
Ben Meadors 13c4c2037d Merge pull request #8444 from meshtastic/master
Master --> develop
2025-10-24 21:06:29 -05:00
62 changed files with 1016 additions and 808 deletions
+1 -1
View File
@@ -143,7 +143,7 @@ jobs:
merge-multiple: true
- name: Test Report
uses: dorny/test-reporter@v2.2.0
uses: dorny/test-reporter@v2.1.1
with:
name: PlatformIO Tests
path: testreport.xml
+6 -6
View File
@@ -8,15 +8,15 @@ plugins:
uri: https://github.com/trunk-io/plugins
lint:
enabled:
- checkov@3.2.492
- renovate@42.5.4
- checkov@3.2.489
- renovate@41.169.1
- prettier@3.6.2
- trufflehog@3.90.13
- trufflehog@3.90.12
- yamllint@1.37.1
- bandit@1.8.6
- trivy@0.67.2
- taplo@0.10.0
- ruff@0.14.4
- ruff@0.14.3
- isort@7.0.0
- markdownlint@0.45.0
- oxipng@9.1.5
@@ -26,9 +26,9 @@ lint:
- hadolint@2.14.0
- shfmt@3.6.0
- shellcheck@0.11.0
- black@25.11.0
- black@25.9.0
- git-diff-check
- gitleaks@8.29.0
- gitleaks@8.28.0
- clang-format@16.0.3
ignore:
- linters: [ALL]
+3
View File
@@ -37,6 +37,9 @@ build_flags =
-DRADIOLIB_EXCLUDE_LR11X0=1
-DHAL_DAC_MODULE_ONLY
-DHAL_RNG_MODULE_ENABLED
-Wl,--wrap=__assert_func
-Wl,--wrap=strerror
-Wl,--wrap=_tzset_unlocked_r
build_src_filter =
${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
@@ -87,6 +87,9 @@
</screenshots>
<releases>
<release version="2.7.16" date="2025-11-19">
<url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.16</url>
</release>
<release version="2.7.15" date="2025-11-13">
<url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.15</url>
</release>
+6
View File
@@ -1,3 +1,9 @@
meshtasticd (2.7.16.0) unstable; urgency=medium
* Version 2.7.16
-- GitHub Actions <github-actions[bot]@users.noreply.github.com> Wed, 19 Nov 2025 16:12:32 +0000
meshtasticd (2.7.15.0) unstable; urgency=medium
* Version 2.7.15
+1 -7
View File
@@ -33,6 +33,7 @@ BuildRequires: python3dist(grpcio[protobuf])
BuildRequires: python3dist(grpcio-tools)
BuildRequires: git-core
BuildRequires: gcc-c++
BuildRequires: (glibc-devel >= 2.38) or pkgconfig(libbsd-overlay)
BuildRequires: pkgconfig(yaml-cpp)
BuildRequires: pkgconfig(libgpiod)
BuildRequires: pkgconfig(bluez)
@@ -49,13 +50,6 @@ BuildRequires: pkgconfig(x11)
BuildRequires: pkgconfig(libinput)
BuildRequires: pkgconfig(xkbcommon-x11)
# libbsd is needed on older Fedora/RHEL to provide 'strlcpy'
%if 0%{?fedora} >= 39 || 0%{?rhel} >= 10
BuildRequires: glibc-devel >= 2.38
%else
BuildRequires: pkgconfig(libbsd-overlay)
%endif
Requires: systemd-udev
%description
+6 -3
View File
@@ -62,7 +62,7 @@ monitor_speed = 115200
monitor_filters = direct
lib_deps =
# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
https://github.com/meshtastic/esp8266-oled-ssd1306/archive/2887bf4a19f64d92c984dcc8fd5ca7429e425e4a.zip
https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0cbc26b1f8f61957af0475f486b362eafe7cc4e2.zip
# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
@@ -115,12 +115,13 @@ lib_deps =
[radiolib_base]
lib_deps =
# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
jgromes/RadioLib@7.3.0
# jgromes/RadioLib@7.4.0
https://github.com/jgromes/RadioLib/archive/536c7267362e2c1345be7054ba45e503252975ff.zip
[device-ui_base]
lib_deps =
# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
https://github.com/meshtastic/device-ui/archive/28167c67dfd13015a0b5eef1828f95fe8e3ab7c3.zip
https://github.com/meshtastic/device-ui/archive/19b7855e9a1d9deff37391659ca7194e4ef57c43.zip
; Common libs for environmental measurements in telemetry module
[environmental_base]
@@ -181,6 +182,8 @@ lib_deps =
dfrobot/DFRobot_BMM150@1.0.0
# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
adafruit/Adafruit TSL2561@1.1.2
# renovate: datasource=custom.pio depName=BH1750_WE packageName=wollewald/BH1750_WE@^1.1.10
wollewald/BH1750_WE@^1.1.10
; (not included in native / portduino)
[environmental_extra]
+3
View File
@@ -34,6 +34,9 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
return useShortName ? "LongM" : "LongMod";
break;
case meshtastic_Config_LoRaConfig_ModemPreset_LITE_FAST:
return useShortName ? "LiteF" : "LiteFast";
break;
default:
return useShortName ? "Custom" : "Invalid";
break;
+8 -8
View File
@@ -14,16 +14,16 @@ class NodeStatus : public Status
CallbackObserver<NodeStatus, const NodeStatus *> statusObserver =
CallbackObserver<NodeStatus, const NodeStatus *>(this, &NodeStatus::updateStatus);
uint8_t numOnline = 0;
uint8_t numTotal = 0;
uint16_t numOnline = 0;
uint16_t numTotal = 0;
uint8_t lastNumTotal = 0;
uint16_t lastNumTotal = 0;
public:
bool forceUpdate = false;
NodeStatus() { statusType = STATUS_TYPE_NODE; }
NodeStatus(uint8_t numOnline, uint8_t numTotal, bool forceUpdate = false) : Status()
NodeStatus(uint16_t numOnline, uint16_t numTotal, bool forceUpdate = false) : Status()
{
this->forceUpdate = forceUpdate;
this->numOnline = numOnline;
@@ -34,11 +34,11 @@ class NodeStatus : public Status
void observe(Observable<const NodeStatus *> *source) { statusObserver.observe(source); }
uint8_t getNumOnline() const { return numOnline; }
uint16_t getNumOnline() const { return numOnline; }
uint8_t getNumTotal() const { return numTotal; }
uint16_t getNumTotal() const { return numTotal; }
uint8_t getLastNumTotal() const { return lastNumTotal; }
uint16_t getLastNumTotal() const { return lastNumTotal; }
bool matches(const NodeStatus *newStatus) const
{
@@ -56,7 +56,7 @@ class NodeStatus : public Status
numTotal = newStatus->getNumTotal();
}
if (isDirty || newStatus->forceUpdate) {
LOG_DEBUG("Node status update: %d online, %d total", numOnline, numTotal);
LOG_DEBUG("Node status update: %u online, %u total", numOnline, numTotal);
onNewStatus.notifyObservers(this);
}
return 0;
+5 -10
View File
@@ -194,7 +194,7 @@ static HasBatteryLevel *batteryLevel; // Default to NULL for no battery level se
#ifdef BATTERY_PIN
static void adcEnable()
void battery_adcEnable()
{
#ifdef ADC_CTRL // enable adc voltage divider when we need to read
#ifdef ADC_USE_PULLUP
@@ -214,7 +214,7 @@ static void adcEnable()
#endif
}
static void adcDisable()
static void battery_adcDisable()
{
#ifdef ADC_CTRL // disable adc voltage divider when we need to read
#ifdef ADC_USE_PULLUP
@@ -320,7 +320,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
uint32_t raw = 0;
float scaled = 0;
adcEnable();
battery_adcEnable();
#ifdef ARCH_ESP32 // ADC block for espressif platforms
raw = espAdcRead();
scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
@@ -332,7 +332,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
raw = raw / BATTERY_SENSE_SAMPLES;
scaled = operativeAdcMultiplier * ((1000 * AREF_VOLTAGE) / pow(2, BATTERY_SENSE_RESOLUTION_BITS)) * raw;
#endif
adcDisable();
battery_adcDisable();
if (!initial_read_done) {
// Flush the smoothing filter with an ADC reading, if the reading is plausibly correct
@@ -906,13 +906,8 @@ void Power::readPowerStatus()
low_voltage_counter++;
LOG_DEBUG("Low voltage counter: %d/10", low_voltage_counter);
if (low_voltage_counter > 10) {
#ifdef ARCH_NRF52
// We can't trigger deep sleep on NRF52, it's freezing the board
LOG_DEBUG("Low voltage detected, but not trigger deep sleep");
#else
LOG_INFO("Low voltage detected, trigger deep sleep");
powerFSM.trigger(EVENT_LOW_BATTERY);
#endif
}
} else {
low_voltage_counter = 0;
@@ -1552,4 +1547,4 @@ bool Power::meshSolarInit()
{
return false;
}
#endif
#endif
+4 -3
View File
@@ -133,11 +133,12 @@ bool AirTime::isTxAllowedChannelUtil(bool polite)
bool AirTime::isTxAllowedAirUtil()
{
if (!config.lora.override_duty_cycle && myRegion->dutyCycle < 100) {
if (utilizationTXPercent() < myRegion->dutyCycle * polite_duty_cycle_percent / 100) {
float effectiveDutyCycle = getEffectiveDutyCycle();
if (!config.lora.override_duty_cycle && effectiveDutyCycle < 100) {
if (utilizationTXPercent() < effectiveDutyCycle * polite_duty_cycle_percent / 100) {
return true;
} else {
LOG_WARN("TX air util. >%f%%. Skip send", myRegion->dutyCycle * polite_duty_cycle_percent / 100);
LOG_WARN("TX air util. >%f%%. Skip send", effectiveDutyCycle * polite_duty_cycle_percent / 100);
return false;
}
}
+1
View File
@@ -228,6 +228,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define ICM20948_ADDR_ALT 0x68
#define BHI260AP_ADDR 0x28
#define BMM150_ADDR 0x13
#define DA217_ADDR 0x26
// -----------------------------------------------------------------------------
// LED
+22 -7
View File
@@ -106,6 +106,7 @@ uint16_t ScanI2CTwoWire::getRegisterValue(const ScanI2CTwoWire::RegisterLocation
if (i2cBus->available())
i2cBus->read();
}
LOG_DEBUG("Register value: 0x%x", value);
return value;
}
@@ -377,14 +378,13 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
}
case SHT31_4x_ADDR: // same as OPT3001_ADDR_ALT
case SHT31_4x_ADDR_ALT: // same as OPT3001_ADDR
registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2);
if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0x11f3 || registerValue == 0xe9c ||
registerValue == 0xc8d) {
type = SHT4X;
logFoundDevice("SHT4X", (uint8_t)addr.address);
} else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2);
if (registerValue == 0x5449) {
type = OPT3001;
logFoundDevice("OPT3001", (uint8_t)addr.address);
} else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2) != 0) { // unique SHT4x serial number
type = SHT4X;
logFoundDevice("SHT4X", (uint8_t)addr.address);
} else {
type = SHT31;
logFoundDevice("SHT31", (uint8_t)addr.address);
@@ -465,8 +465,23 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
break;
SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address);
SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555", (uint8_t)addr.address);
SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
case TCA9555_ADDR:
registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x01), 1);
if (registerValue == 0x13) {
registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
if (registerValue == 0x81) {
type = DA217;
logFoundDevice("DA217", (uint8_t)addr.address);
} else {
type = TCA9555;
logFoundDevice("TCA9555", (uint8_t)addr.address);
}
} else {
type = TCA9555;
logFoundDevice("TCA9555", (uint8_t)addr.address);
}
break;
case TSL25911_ADDR:
registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x12), 1);
if (registerValue == 0x50) {
+27 -8
View File
@@ -240,6 +240,9 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
buffer[bytesRead] = b;
bytesRead++;
if ((bytesRead == 767) || (b == '\r')) {
#ifdef GPS_DEBUG
LOG_DEBUG(debugmsg.c_str());
#endif
if (strnstr((char *)buffer, message, bytesRead) != nullptr) {
#ifdef GPS_DEBUG
LOG_DEBUG("Found: %s", message); // Log the found message
@@ -247,9 +250,6 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
return GNSS_RESPONSE_OK;
} else {
bytesRead = 0;
#ifdef GPS_DEBUG
LOG_DEBUG(debugmsg.c_str());
#endif
}
}
}
@@ -1275,6 +1275,24 @@ GnssModel_t GPS::probe(int serialSpeed)
memset(&ublox_info, 0, sizeof(ublox_info));
delay(100);
#if defined(PIN_GPS_RESET) && PIN_GPS_RESET != -1
digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE); // assert for 10ms
delay(10);
digitalWrite(PIN_GPS_RESET, !GPS_RESET_MODE);
// attempt to detect the chip based on boot messages
std::vector<ChipInfo> passive_detect = {
{"AG3335", "$PAIR021,AG3335", GNSS_MODEL_AG3335},
{"AG3352", "$PAIR021,AG3352", GNSS_MODEL_AG3352},
{"RYS3520", "$PAIR021,REYAX_RYS3520_V2", GNSS_MODEL_AG3352},
{"UC6580", "UC6580", GNSS_MODEL_UC6580},
// as L76K is sort of a last ditch effort, we won't attempt to detect it by startup messages for now.
/*{"L76K", "SW=URANUS", GNSS_MODEL_MTK}*/};
GnssModel_t detectedDriver = getProbeResponse(500, passive_detect, serialSpeed);
if (detectedDriver != GNSS_MODEL_UNKNOWN) {
return detectedDriver;
}
#endif
// Close all NMEA sentences, valid for L76K, ATGM336H (and likely other AT6558 devices)
_serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
delay(20);
@@ -1473,12 +1491,12 @@ GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipI
}
if (c == ',' || (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n')) {
#ifdef GPS_DEBUG
LOG_DEBUG(response);
#endif
// check if we can see our chips
for (const auto &chipInfo : responseMap) {
if (strstr(response, chipInfo.detectionString.c_str()) != nullptr) {
#ifdef GPS_DEBUG
LOG_DEBUG(response);
#endif
LOG_INFO("%s detected", chipInfo.chipName.c_str());
delete[] response; // Cleanup before return
return chipInfo.driver;
@@ -1486,6 +1504,9 @@ GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipI
}
}
if (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n') {
#ifdef GPS_DEBUG
LOG_DEBUG(response);
#endif
// Reset the response buffer for the next potential message
responseLen = 0;
response[0] = '\0';
@@ -1572,8 +1593,6 @@ GPS *GPS::createGps()
#ifdef PIN_GPS_RESET
pinMode(PIN_GPS_RESET, OUTPUT);
digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE); // assert for 10ms
delay(10);
digitalWrite(PIN_GPS_RESET, !GPS_RESET_MODE);
#endif
+2 -2
View File
@@ -310,7 +310,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
#ifdef BUILD_EPOCH
if (tv.tv_sec < BUILD_EPOCH) {
if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
LOG_WARN("Ignore time (%lu) before build epoch (%lu)!", printableEpoch, BUILD_EPOCH);
lastTimeValidationWarning = millis();
}
return RTCSetResultInvalidTime;
@@ -319,7 +319,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
// Calculate max allowed time safely to avoid overflow in logging
uint64_t maxAllowedTime = (uint64_t)BUILD_EPOCH + FORTY_YEARS;
uint32_t maxAllowedPrintable = (maxAllowedTime > UINT32_MAX) ? UINT32_MAX : (uint32_t)maxAllowedTime;
LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch,
LOG_WARN("Ignore time (%lu) too far in the future (build epoch: %lu, max allowed: %lu)!", printableEpoch,
(uint32_t)BUILD_EPOCH, maxAllowedPrintable);
lastTimeValidationWarning = millis();
}
+25 -30
View File
@@ -427,35 +427,33 @@ static LGFX *tft = nullptr;
#include "lgfx/v1/Touch.hpp"
namespace lgfx
{
inline namespace v1
{
inline namespace v1
{
class TOUCH_CHSC6X : public ITouch
{
public:
public:
TOUCH_CHSC6X(void)
{
_cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
_cfg.x_min = 0;
_cfg.x_max = 240;
_cfg.y_min = 0;
_cfg.y_max = 320;
_cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
_cfg.x_min = 0;
_cfg.x_max = 240;
_cfg.y_min = 0;
_cfg.y_max = 320;
};
bool init(void) override
{
if (chsc6xTouch == nullptr) {
chsc6xTouch = new chsc6x(&Wire1, TOUCH_SDA_PIN, TOUCH_SCL_PIN, TOUCH_INT_PIN, TOUCH_RST_PIN);
bool init(void) override {
if(chsc6xTouch==nullptr) {
chsc6xTouch=new chsc6x(&Wire1,TOUCH_SDA_PIN,TOUCH_SCL_PIN,TOUCH_INT_PIN,TOUCH_RST_PIN);
}
chsc6xTouch->chsc6x_init();
return true;
};
uint_fast8_t getTouchRaw(touch_point_t *tp, uint_fast8_t count) override
{
uint16_t raw_x, raw_y;
if (chsc6xTouch->chsc6x_read_touch_info(&raw_x, &raw_y) == 0) {
tp[0].x = 320 - 1 - raw_y;
tp[0].y = 240 - 1 - raw_x;
uint_fast8_t getTouchRaw(touch_point_t* tp, uint_fast8_t count) override {
uint16_t raw_x,raw_y;
if (chsc6xTouch->chsc6x_read_touch_info(&raw_x, &raw_y)==0) {
tp[0].x = 320-1-raw_y;
tp[0].y = 240-1-raw_x ;
tp[0].size = 1;
tp[0].id = 1;
return 1;
@@ -464,14 +462,13 @@ class TOUCH_CHSC6X : public ITouch
return 0;
};
void wakeup(void) override{};
void sleep(void) override{};
void wakeup(void) override {};
void sleep(void) override {};
private:
chsc6x *chsc6xTouch = nullptr;
};
} // namespace v1
} // namespace lgfx
chsc6x *chsc6xTouch=nullptr;
};
}
}
#endif
class LGFX : public lgfx::LGFX_Device
{
@@ -483,8 +480,6 @@ class LGFX : public lgfx::LGFX_Device
lgfx::Touch_FT5x06 _touch_instance;
#elif defined(HELTEC_V4_TFT)
lgfx::TOUCH_CHSC6X _touch_instance;
#elif defined(HELTEC_V4_TFT)
lgfx::TOUCH_CHSC6X _touch_instance;
#else
lgfx::Touch_GT911 _touch_instance;
#endif
@@ -518,9 +513,9 @@ class LGFX : public lgfx::LGFX_Device
{ // Set the display panel control.
auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
cfg.pin_cs = ST7789_CS; // Pin number where CS is connected (-1 = disable)
cfg.pin_rst = ST7789_RESET; // Pin number where RST is connected (-1 = disable)
cfg.pin_busy = ST7789_BUSY; // Pin number where BUSY is connected (-1 = disable)
cfg.pin_cs = ST7789_CS; // Pin number where CS is connected (-1 = disable)
cfg.pin_rst = ST7789_RESET; // Pin number where RST is connected (-1 = disable)
cfg.pin_busy = ST7789_BUSY; // Pin number where BUSY is connected (-1 = disable)
// The following setting values ​​are general initial values ​​for each panel, so please comment out any
// unknown items and try them.
+61 -46
View File
@@ -194,17 +194,12 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
graphics::drawCommonHeader(display, x, y, titleStr, true, true);
int line = 0;
#ifdef T_WATCH_S3
if (nimbleBluetooth && nimbleBluetooth->isConnected()) {
graphics::ClockRenderer::drawBluetoothConnectedIcon(display, display->getWidth() - 18, display->getHeight() - 14);
}
#endif
uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // Display local timezone
char timeString[16];
int hour = 0;
int minute = 0;
int second = 0;
if (rtc_sec > 0) {
long hms = rtc_sec % SEC_PER_DAY;
hms = (hms + SEC_PER_DAY) % SEC_PER_DAY;
@@ -215,11 +210,11 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
}
bool isPM = hour >= 12;
// hour = hour > 12 ? hour - 12 : hour;
if (config.display.use_12h_clock) {
hour %= 12;
if (hour == 0)
if (hour == 0) {
hour = 12;
}
snprintf(timeString, sizeof(timeString), "%d:%02d", hour, minute);
} else {
snprintf(timeString, sizeof(timeString), "%02d:%02d", hour, minute);
@@ -229,24 +224,56 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
char secondString[8];
snprintf(secondString, sizeof(secondString), "%02d", second);
#ifdef T_WATCH_S3
float scale = 1.5;
#elif defined(CHATTER_2)
float scale = 1.1;
#else
float scale = 0.75;
if (isHighResolution) {
scale = 1.5;
}
#endif
static bool scaleInitialized = false;
static float scale = 0.75f;
static float segmentWidth = SEGMENT_WIDTH * 0.75f;
static float segmentHeight = SEGMENT_HEIGHT * 0.75f;
uint16_t segmentWidth = SEGMENT_WIDTH * scale;
uint16_t segmentHeight = SEGMENT_HEIGHT * scale;
if (!scaleInitialized) {
float screenwidth_target_ratio = 0.80f; // Target 80% of display width (adjustable)
float max_scale = 3.5f; // Safety limit to avoid runaway scaling
float step = 0.05f; // Step increment per iteration
float target_width = display->getWidth() * screenwidth_target_ratio;
float target_height =
display->getHeight() -
(isHighResolution
? 46
: 33); // Be careful adjusting this number, we have to account for header and the text under the time
float calculated_width_size = 0.0f;
float calculated_height_size = 0.0f;
while (true) {
segmentWidth = SEGMENT_WIDTH * scale;
segmentHeight = SEGMENT_HEIGHT * scale;
calculated_width_size = segmentHeight + ((segmentWidth + (segmentHeight * 2) + 4) * 4);
calculated_height_size = segmentHeight + ((segmentHeight + (segmentHeight * 2) + 4) * 2);
if (calculated_width_size >= target_width || calculated_height_size >= target_height || scale >= max_scale) {
break;
}
scale += step;
}
// If we overshot width, back off one step and recompute segment sizes
if (calculated_width_size > target_width || calculated_height_size > target_height) {
scale -= step;
segmentWidth = SEGMENT_WIDTH * scale;
segmentHeight = SEGMENT_HEIGHT * scale;
}
scaleInitialized = true;
}
size_t len = strlen(timeString);
// calculate hours:minutes string width
uint16_t timeStringWidth = strlen(timeString) * 5;
uint16_t timeStringWidth = len * 5; // base spacing between characters
for (uint8_t i = 0; i < strlen(timeString); i++) {
for (size_t i = 0; i < len; i++) {
char character = timeString[i];
if (character == ':') {
@@ -257,19 +284,21 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
}
uint16_t hourMinuteTextX = (display->getWidth() / 2) - (timeStringWidth / 2);
uint16_t startingHourMinuteTextX = hourMinuteTextX;
uint16_t hourMinuteTextY = (display->getHeight() / 2) - (((segmentWidth * 2) + (segmentHeight * 3) + 8) / 2);
uint16_t hourMinuteTextY = (display->getHeight() / 2) - (((segmentWidth * 2) + (segmentHeight * 3) + 8) / 2) + 2;
// iterate over characters in hours:minutes string and draw segmented characters
for (uint8_t i = 0; i < strlen(timeString); i++) {
for (size_t i = 0; i < len; i++) {
char character = timeString[i];
if (character == ':') {
drawSegmentedDisplayColon(display, hourMinuteTextX, hourMinuteTextY, scale);
hourMinuteTextX += segmentHeight + 6;
if (scale >= 2.0f) {
hourMinuteTextX += (uint16_t)(4.5f * scale);
}
} else {
drawSegmentedDisplayCharacter(display, hourMinuteTextX, hourMinuteTextY, character - '0', scale);
@@ -279,38 +308,29 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
hourMinuteTextX += 5;
}
// draw seconds string
// draw seconds string + AM/PM
display->setFont(FONT_SMALL);
int xOffset = (isHighResolution) ? 0 : -1;
if (hour >= 10) {
xOffset += (isHighResolution) ? 32 : 18;
}
int yOffset = (isHighResolution) ? 3 : 1;
#ifdef SENSECAP_INDICATOR
yOffset -= 3;
#endif
#ifdef T_DECK
yOffset -= 5;
#endif
if (config.display.use_12h_clock) {
display->drawString(startingHourMinuteTextX + xOffset, (display->getHeight() - hourMinuteTextY) - yOffset - 2,
isPM ? "pm" : "am");
display->drawString(startingHourMinuteTextX + xOffset, (display->getHeight() - hourMinuteTextY) - 1, isPM ? "pm" : "am");
}
#ifndef USE_EINK
xOffset = (isHighResolution) ? 18 : 10;
display->drawString(startingHourMinuteTextX + timeStringWidth - xOffset, (display->getHeight() - hourMinuteTextY) - yOffset,
if (scale >= 2.0f) {
xOffset -= (int)(4.5f * scale);
}
display->drawString(startingHourMinuteTextX + timeStringWidth - xOffset, (display->getHeight() - hourMinuteTextY) - 1,
secondString);
#endif
graphics::drawCommonFooter(display, x, y);
}
void drawBluetoothConnectedIcon(OLEDDisplay *display, int16_t x, int16_t y)
{
display->drawFastImage(x, y, 18, 14, bluetoothConnectedIcon);
}
// Draw an analog clock
void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
{
@@ -321,11 +341,6 @@ void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
graphics::drawCommonHeader(display, x, y, titleStr, true, true);
int line = 0;
#ifdef T_WATCH_S3
if (nimbleBluetooth && nimbleBluetooth->isConnected()) {
drawBluetoothConnectedIcon(display, display->getWidth() - 18, display->getHeight() - 14);
}
#endif
// clock face center coordinates
int16_t centerX = display->getWidth() / 2;
int16_t centerY = display->getHeight() / 2;
-1
View File
@@ -24,7 +24,6 @@ void drawVerticalSegment(OLEDDisplay *display, int x, int y, int width, int heig
// UI elements for clock displays
// void drawWatchFaceToggleButton(OLEDDisplay *display, int16_t x, int16_t y, bool digitalMode = true, float scale = 1);
void drawBluetoothConnectedIcon(OLEDDisplay *display, int16_t x, int16_t y);
} // namespace ClockRenderer
+59 -22
View File
@@ -102,7 +102,8 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
"KZ_433",
"KZ_863",
"NP_865",
"BR_902"};
"BR_902",
"EU_866"};
BannerOverlayOptions bannerOptions;
#if defined(M5STACK_UNITC6L)
bannerOptions.message = "LoRa Region";
@@ -111,7 +112,7 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
#endif
bannerOptions.durationMs = duration;
bannerOptions.optionsArrayPtr = optionsArray;
bannerOptions.optionsCount = 27;
bannerOptions.optionsCount = 28;
bannerOptions.InitialSelected = 0;
bannerOptions.bannerCallback = [](int selected) -> void {
if (selected != 0 && config.lora.region != _meshtastic_Config_LoRaConfig_RegionCode(selected)) {
@@ -141,7 +142,7 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
}
config.lora.tx_enabled = true;
initRegion();
if (myRegion->dutyCycle < 100) {
if (getEffectiveDutyCycle() < 100) {
config.lora.ignore_mqtt = true; // Ignore MQTT by default if region has a duty cycle limit
}
@@ -194,8 +195,8 @@ void menuHandler::DeviceRolePicker()
void menuHandler::RadioPresetPicker()
{
static const char *optionsArray[] = {"Back", "LongSlow", "LongModerate", "LongFast", "MediumSlow",
"MediumFast", "ShortSlow", "ShortFast", "ShortTurbo"};
static const char *optionsArray[] = {"Back", "LongSlow", "LongModerate", "LongFast", "MediumSlow",
"MediumFast", "ShortSlow", "ShortFast", "ShortTurbo", "LiteFast"};
enum optionsNumbers {
Back = 0,
radiopreset_LongSlow = 1,
@@ -205,12 +206,13 @@ void menuHandler::RadioPresetPicker()
radiopreset_MediumFast = 5,
radiopreset_ShortSlow = 6,
radiopreset_ShortFast = 7,
radiopreset_ShortTurbo = 8
radiopreset_ShortTurbo = 8,
radiopreset_LiteFast = 9
};
BannerOverlayOptions bannerOptions;
bannerOptions.message = "Radio Preset";
bannerOptions.optionsArrayPtr = optionsArray;
bannerOptions.optionsCount = 9;
bannerOptions.optionsCount = 10;
bannerOptions.bannerCallback = [](int selected) -> void {
if (selected == Back) {
menuHandler::menuQueue = menuHandler::lora_Menu;
@@ -232,6 +234,8 @@ void menuHandler::RadioPresetPicker()
config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST;
} else if (selected == radiopreset_ShortTurbo) {
config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO;
} else if (selected == radiopreset_LiteFast) {
config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LITE_FAST;
}
service->reloadConfig(SEGMENT_CONFIG);
rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
@@ -574,21 +578,16 @@ void menuHandler::textMessageBaseMenu()
void menuHandler::systemBaseMenu()
{
enum optionsNumbers { Back, Notifications, ScreenOptions, Bluetooth, PowerMenu, FrameToggles, Test, enumEnd };
enum optionsNumbers { Back, Notifications, ScreenOptions, Bluetooth, PowerMenu, Test, enumEnd };
static const char *optionsArray[enumEnd] = {"Back"};
static int optionsEnumArray[enumEnd] = {Back};
int options = 1;
optionsArray[options] = "Notifications";
optionsEnumArray[options++] = Notifications;
#if defined(ST7789_CS) || defined(ST7796_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || \
defined(USE_SH1107) || defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
optionsArray[options] = "Screen Options";
optionsArray[options] = "Display Options";
optionsEnumArray[options++] = ScreenOptions;
#endif
optionsArray[options] = "Frame Visiblity Toggle";
optionsEnumArray[options++] = FrameToggles;
#if defined(M5STACK_UNITC6L)
optionsArray[options] = "Bluetooth";
#else
@@ -626,9 +625,6 @@ void menuHandler::systemBaseMenu()
} else if (selected == PowerMenu) {
menuHandler::menuQueue = menuHandler::power_menu;
screen->runNow();
} else if (selected == FrameToggles) {
menuHandler::menuQueue = menuHandler::FrameToggles;
screen->runNow();
} else if (selected == Test) {
menuHandler::menuQueue = menuHandler::test_menu;
screen->runNow();
@@ -943,9 +939,7 @@ void menuHandler::BluetoothToggleMenu()
bannerOptions.optionsArrayPtr = optionsArray;
bannerOptions.optionsCount = 3;
bannerOptions.bannerCallback = [](int selected) -> void {
if (selected == 0)
return;
else if (selected != (config.bluetooth.enabled ? 1 : 2)) {
if (selected == 1 || selected == 2) {
InputEvent event = {.inputEvent = (input_broker_event)170, .kbchar = 170, .touchX = 0, .touchY = 0};
inputBroker->injectInputEvent(&event);
}
@@ -1339,7 +1333,7 @@ void menuHandler::screenOptionsMenu()
hasSupportBrightness = false;
#endif
enum optionsNumbers { Back, NodeNameLength, Brightness, ScreenColor };
enum optionsNumbers { Back, NodeNameLength, Brightness, ScreenColor, FrameToggles, DisplayUnits };
static const char *optionsArray[5] = {"Back"};
static int optionsEnumArray[5] = {Back};
int options = 1;
@@ -1361,8 +1355,14 @@ void menuHandler::screenOptionsMenu()
optionsEnumArray[options++] = ScreenColor;
#endif
optionsArray[options] = "Frame Visiblity Toggle";
optionsEnumArray[options++] = FrameToggles;
optionsArray[options] = "Display Units";
optionsEnumArray[options++] = DisplayUnits;
BannerOverlayOptions bannerOptions;
bannerOptions.message = "Screen Options";
bannerOptions.message = "Display Options";
bannerOptions.optionsArrayPtr = optionsArray;
bannerOptions.optionsCount = options;
bannerOptions.optionsEnumPtr = optionsEnumArray;
@@ -1376,6 +1376,12 @@ void menuHandler::screenOptionsMenu()
} else if (selected == NodeNameLength) {
menuHandler::menuQueue = menuHandler::node_name_length_menu;
screen->runNow();
} else if (selected == FrameToggles) {
menuHandler::menuQueue = menuHandler::FrameToggles;
screen->runNow();
} else if (selected == DisplayUnits) {
menuHandler::menuQueue = menuHandler::DisplayUnits;
screen->runNow();
} else {
menuQueue = system_base_menu;
screen->runNow();
@@ -1587,6 +1593,34 @@ void menuHandler::FrameToggles_menu()
screen->showOverlayBanner(bannerOptions);
}
void menuHandler::DisplayUnits_menu()
{
enum optionsNumbers { Back, MetricUnits, ImperialUnits };
static const char *optionsArray[] = {"Back", "Metric", "Imperial"};
BannerOverlayOptions bannerOptions;
bannerOptions.message = " Select display units";
bannerOptions.optionsArrayPtr = optionsArray;
bannerOptions.optionsCount = 3;
if (config.display.units == meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL)
bannerOptions.InitialSelected = 2;
else
bannerOptions.InitialSelected = 1;
bannerOptions.bannerCallback = [](int selected) -> void {
if (selected == MetricUnits) {
config.display.units = meshtastic_Config_DisplayConfig_DisplayUnits_METRIC;
service->reloadConfig(SEGMENT_CONFIG);
} else if (selected == ImperialUnits) {
config.display.units = meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL;
service->reloadConfig(SEGMENT_CONFIG);
} else {
menuHandler::menuQueue = menuHandler::screen_options_menu;
screen->runNow();
}
};
screen->showOverlayBanner(bannerOptions);
}
void menuHandler::handleMenuSwitch(OLEDDisplay *display)
{
if (menuQueue != menu_none)
@@ -1701,6 +1735,9 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
case FrameToggles:
FrameToggles_menu();
break;
case DisplayUnits:
DisplayUnits_menu();
break;
case throttle_message:
screen->showSimpleBanner("Too Many Attempts\nTry again in 60 seconds.", 5000);
break;
+3 -1
View File
@@ -44,7 +44,8 @@ class menuHandler
trace_route_menu,
throttle_message,
node_name_length_menu,
FrameToggles
FrameToggles,
DisplayUnits
};
static screenMenus menuQueue;
@@ -88,6 +89,7 @@ class menuHandler
static void powerMenu();
static void nodeNameLengthMenu();
static void FrameToggles_menu();
static void DisplayUnits_menu();
static void textMessageMenu();
private:
+14 -1
View File
@@ -425,6 +425,12 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
{
const int COMMON_HEADER_HEIGHT = FONT_HEIGHT_SMALL - 1;
const int rowYOffset = FONT_HEIGHT_SMALL - 3;
bool locationScreen = false;
if (strcmp(title, "Bearings") == 0)
locationScreen = true;
else if (strcmp(title, "Distance") == 0)
locationScreen = true;
#if defined(M5STACK_UNITC6L)
int columnWidth = display->getWidth();
#else
@@ -440,7 +446,7 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
int totalEntries = nodeDB->getNumMeshNodes();
int totalRowsAvailable = (display->getHeight() - y) / rowYOffset;
int numskipped = 0;
int visibleNodeRows = totalRowsAvailable;
#if defined(M5STACK_UNITC6L)
int totalColumns = 1;
@@ -460,6 +466,10 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
int rowCount = 0;
for (int i = startIndex; i < endIndex; ++i) {
if (locationScreen && !nodeDB->getMeshNodeByIndex(i)->has_position) {
numskipped++;
continue;
}
int xPos = x + (col * columnWidth);
int yPos = y + yOffset;
renderer(display, nodeDB->getMeshNodeByIndex(i), xPos, yPos, columnWidth);
@@ -482,6 +492,9 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
}
}
// This should correct the scrollbar
totalEntries -= numskipped;
#if !defined(M5STACK_UNITC6L)
// Draw column separator
if (shownCount > 0) {
+144 -191
View File
@@ -18,6 +18,8 @@ const Emote emotes[] = {
{"\U0001F642", Slightly_Smiling, Slightly_Smiling_width, Slightly_Smiling_height}, // 🙂 Slightly Smiling Face
{"\U0001F609", Winking_Face, Winking_Face_width, Winking_Face_height}, // 😉 Winking Face
{"\U0001F601", Grinning_Smiling_Eyes, Grinning_Smiling_Eyes_width, Grinning_Smiling_Eyes_height}, // 😁 Grinning Smiling Eyes
{"\U0001F60D", Heart_eyes, Heart_eyes_width, Heart_eyes_height}, // 😍 Heart Eyes
{"\U0001F970", heart_smile, heart_smile_width, heart_smile_height}, // 🥰 Smiling Face with Hearts
// --- Question/Alert ---
{"\u2753", question, question_width, question_height}, // ❓ Question Mark
@@ -30,11 +32,15 @@ const Emote emotes[] = {
{"\U0001F605", haha, haha_width, haha_height}, // 😅 Smiling with Sweat
{"\U0001F604", Grinning_SmilingEyes2, Grinning_SmilingEyes2_width,
Grinning_SmilingEyes2_height}, // 😄 Grinning Face with Smiling Eyes
{"\U0001F62D", Loudly_Crying_Face, Loudly_Crying_Face_width, Loudly_Crying_Face_height}, // 😭 Loudly Crying Face
// --- Gestures and People ---
{"\U0001F44B", wave_icon, wave_icon_width, wave_icon_height}, // 👋 Waving Hand
{"\U0001F920", cowboy, cowboy_width, cowboy_height}, // 🤠 Cowboy Hat Face
{"\U0001F3A7", deadmau5, deadmau5_width, deadmau5_height}, // 🎧 Headphones
{"\U0001F44B", wave_icon, wave_icon_width, wave_icon_height}, // 👋 Waving Hand
{"\u270C\uFE0F", peace_sign, peace_sign_width, peace_sign_height}, // ✌️ Victory Hand
{"\U0001F596", vulcan_salute, vulcan_salute_width, vulcan_salute_height}, // 🖖 Vulcan Salute
{"\U0001F64F", Praying, Praying_width, Praying_height}, // 🙏 Praying Hands
{"\U0001F920", cowboy, cowboy_width, cowboy_height}, // 🤠 Cowboy Hat Face
{"\U0001F3A7", deadmau5, deadmau5_width, deadmau5_height}, // 🎧 Headphones
// --- Weather ---
{"\u2600", sun, sun_width, sun_height}, // ☀ Sun (without variation selector)
@@ -45,8 +51,12 @@ const Emote emotes[] = {
// --- Misc Faces ---
{"\U0001F608", devil, devil_width, devil_height}, // 😈 Smiling Face with Horns
{"\U0001F921", clown, clown_width, clown_height}, // 🤡 Clown Face
{"\U0001F916", robo, robo_width, robo_height}, // 🤖 Robot Face
// --- Hearts (Multiple Unicode Aliases) ---
{"\u2665", heart, heart_width, heart_height}, // ♥ Black Heart Suit
{"\u2665\uFE0F", heart, heart_width, heart_height}, // ♥️ Black Heart Suit (emoji presentation)
{"\u2764\uFE0F", heart, heart_width, heart_height}, // ❤️ Red Heart
{"\U0001F9E1", heart, heart_width, heart_height}, // 🧡 Orange Heart
{"\U00002763", heart, heart_width, heart_height}, // ❣ Heart Exclamation
@@ -57,223 +67,166 @@ const Emote emotes[] = {
{"\U0001F498", heart, heart_width, heart_height}, // 💘 Heart with Arrow
// --- Objects ---
{"\U0001F4A9", poo, poo_width, poo_height}, // 💩 Pile of Poo
{"\U0001F514", bell_icon, bell_icon_width, bell_icon_height} // 🔔 Bell
{"\U0001F4A9", poo, poo_width, poo_height}, // 💩 Pile of Poo
{"\U0001F514", bell_icon, bell_icon_width, bell_icon_height}, // 🔔 Bell
{"\U0001F36A", cookie, cookie_width, cookie_height}, // 🍪 Cookie
{"\U0001F525", Fire, Fire_width, Fire_height}, // 🔥 Fire
{"\u2728", Sparkles, Sparkles_width, Sparkles_height}, // ✨ Sparkles
{"\U0001F573\uFE0F", hole, hole_width, hole_height}, // 🕳️ Hole
{"\U0001F3B3", bowling, bowling_width, bowling_height} // 🎳 Bowling
#endif
};
const int numEmotes = sizeof(emotes) / sizeof(emotes[0]);
#ifndef EXCLUDE_EMOJI
const unsigned char thumbup[] PROGMEM = {
0x00, 0x1C, 0x00, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x12, 0x00, 0x00, 0x00, 0x11, 0x00, 0x00, 0x80, 0x09, 0x00, 0x00,
0xC0, 0x08, 0x00, 0x00, 0x40, 0x08, 0x00, 0x00, 0x20, 0x04, 0x00, 0x00, 0x10, 0x04, 0x00, 0x00, 0x18, 0x02, 0x00, 0x00,
0x0C, 0xCE, 0x7F, 0x00, 0x04, 0x20, 0x80, 0x00, 0x02, 0x20, 0x80, 0x00, 0x02, 0x60, 0xC0, 0x00, 0x01, 0xF8, 0xFF, 0x01,
0x01, 0x08, 0x00, 0x01, 0x01, 0x08, 0x00, 0x01, 0x01, 0xF8, 0xFF, 0x00, 0x01, 0x10, 0x80, 0x00, 0x01, 0x18, 0x80, 0x00,
0x02, 0x30, 0xC0, 0x00, 0x06, 0xE0, 0x3F, 0x00, 0x0C, 0x20, 0x30, 0x00, 0x38, 0x20, 0x10, 0x00, 0xE0, 0xCF, 0x1F, 0x00,
};
const unsigned char thumbup[] PROGMEM = {0x00, 0x03, 0x80, 0x04, 0x80, 0x04, 0x40, 0x04, 0x20, 0x02, 0x18,
0x02, 0x06, 0x3F, 0x06, 0x40, 0x06, 0x70, 0x06, 0x40, 0x06, 0x70,
0x06, 0x40, 0x06, 0x30, 0x08, 0x20, 0xF0, 0x1F, 0x00, 0x00};
const unsigned char thumbdown[] PROGMEM = {
0xE0, 0xCF, 0x1F, 0x00, 0x38, 0x20, 0x10, 0x00, 0x0C, 0x20, 0x30, 0x00, 0x06, 0xE0, 0x3F, 0x00, 0x02, 0x30, 0xC0, 0x00,
0x01, 0x18, 0x80, 0x00, 0x01, 0x10, 0x80, 0x00, 0x01, 0xF8, 0xFF, 0x00, 0x01, 0x08, 0x00, 0x01, 0x01, 0x08, 0x00, 0x01,
0x01, 0xF8, 0xFF, 0x01, 0x02, 0x60, 0xC0, 0x00, 0x02, 0x20, 0x80, 0x00, 0x04, 0x20, 0x80, 0x00, 0x0C, 0xCE, 0x7F, 0x00,
0x18, 0x02, 0x00, 0x00, 0x10, 0x04, 0x00, 0x00, 0x20, 0x04, 0x00, 0x00, 0x40, 0x08, 0x00, 0x00, 0xC0, 0x08, 0x00, 0x00,
0x80, 0x09, 0x00, 0x00, 0x00, 0x11, 0x00, 0x00, 0x00, 0x12, 0x00, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x00,
};
const unsigned char thumbdown[] PROGMEM = {0xF0, 0x1F, 0x08, 0x20, 0x06, 0x30, 0x06, 0x40, 0x06, 0x70, 0x06,
0x40, 0x06, 0x70, 0x06, 0x40, 0x06, 0x3F, 0x18, 0x02, 0x20, 0x02,
0x40, 0x04, 0x80, 0x04, 0x80, 0x04, 0x00, 0x03, 0x00, 0x00};
const unsigned char Smiling_Eyes[] PROGMEM = {
0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0xff, 0xc0, 0xe0, 0xff, 0xff, 0xc1,
0xf0, 0xff, 0xff, 0xc3, 0xf8, 0xff, 0xff, 0xc7, 0xf8, 0xff, 0xff, 0xcf, 0xfc, 0xff, 0xff, 0xcf, 0xfc, 0xff, 0xff, 0xcf,
0x7e, 0xf8, 0xc3, 0xdf, 0x3e, 0xf0, 0x81, 0xdf, 0xbf, 0xf7, 0xbd, 0xff, 0xff, 0xff, 0xff, 0xff, 0x9f, 0xff, 0x3f, 0xff,
0x6f, 0xff, 0xdf, 0xfe, 0x6f, 0xff, 0xdf, 0xfe, 0x9f, 0xff, 0x3f, 0xff, 0xfe, 0xff, 0xff, 0xdf, 0x7e, 0xff, 0xdf, 0xdf,
0x7c, 0xff, 0xdf, 0xcf, 0xfc, 0xfe, 0xef, 0xcf, 0xf8, 0xf9, 0xf7, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x07, 0xc0};
const unsigned char Smiling_Eyes[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x52,
0x4A, 0x02, 0x40, 0x02, 0x40, 0x22, 0x44, 0x22, 0x44, 0xC2, 0x43,
0x04, 0x20, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
const unsigned char Grinning[] PROGMEM = {
0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0xff, 0xc0, 0xe0, 0xff, 0xff, 0xc1,
0xf0, 0xff, 0xff, 0xc3, 0xf8, 0xff, 0xff, 0xc7, 0xf8, 0xff, 0xff, 0xcf, 0xfc, 0xf9, 0xf3, 0xcf, 0xfc, 0xf0, 0xe1, 0xcf,
0xfe, 0xf0, 0xe1, 0xdf, 0xfe, 0xf0, 0xe1, 0xdf, 0xff, 0xf0, 0xe1, 0xff, 0xff, 0xf9, 0xf3, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x80, 0xff, 0xbe, 0xff, 0xbf, 0xdf, 0x7e, 0x00, 0xc0, 0xdf,
0x7c, 0x00, 0xc0, 0xcf, 0xfc, 0x00, 0xe0, 0xcf, 0xf8, 0x01, 0xf0, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0};
const unsigned char Grinning[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x44, 0x22, 0x42,
0x42, 0x02, 0x40, 0x02, 0x40, 0xF2, 0x4F, 0x12, 0x48, 0x22, 0x44,
0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
const unsigned char Slightly_Smiling[] PROGMEM = {
0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0xff, 0xc0, 0xe0, 0xff, 0xff, 0xc1,
0xf0, 0xff, 0xff, 0xc3, 0xf8, 0xff, 0xff, 0xc7, 0xf8, 0xff, 0xff, 0xcf, 0xfc, 0xf9, 0xf3, 0xcf, 0xfc, 0xf0, 0xe1, 0xcf,
0xfe, 0xf0, 0xe1, 0xdf, 0xfe, 0xf0, 0xe1, 0xdf, 0xff, 0xf0, 0xe1, 0xff, 0xff, 0xf9, 0xf3, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0xdf, 0x7e, 0xff, 0xdf, 0xdf,
0x7c, 0xff, 0xdf, 0xcf, 0xfc, 0xfe, 0xef, 0xcf, 0xf8, 0xf9, 0xf7, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0};
const unsigned char Slightly_Smiling[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x44, 0x22, 0x42,
0x42, 0x02, 0x40, 0x02, 0x40, 0x12, 0x48, 0x12, 0x48, 0x22, 0x44,
0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
const unsigned char Winking_Face[] PROGMEM = {
0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0xff, 0xc0, 0xe0, 0xff, 0xff, 0xc1,
0xf0, 0xf0, 0xff, 0xc3, 0x78, 0xef, 0xc3, 0xc7, 0xb8, 0xdf, 0xbd, 0xcf, 0xfc, 0xf9, 0x7f, 0xcf, 0xfc, 0xf0, 0xff, 0xcf,
0xfe, 0xf0, 0xc3, 0xdf, 0xfe, 0xf0, 0x81, 0xdf, 0xff, 0xf0, 0xbf, 0xff, 0xff, 0xf9, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0xdf, 0x7e, 0xff, 0xdf, 0xdf,
0x7c, 0xff, 0xdf, 0xcf, 0xfc, 0xfe, 0xef, 0xcf, 0xf8, 0xf9, 0xf7, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x07, 0xc0};
const unsigned char Winking_Face[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x44, 0x20, 0x42,
0x46, 0x02, 0x40, 0x02, 0x40, 0x12, 0x48, 0x12, 0x48, 0x22, 0x44,
0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
const unsigned char Grinning_Smiling_Eyes[] PROGMEM = {
0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0xff, 0xc0, 0xe0, 0xff, 0xff, 0xc1,
0xf0, 0xff, 0xff, 0xc3, 0xf8, 0xff, 0xff, 0xc7, 0xf8, 0xff, 0xff, 0xcf, 0xfc, 0xf8, 0xe3, 0xcf, 0x7c, 0xf7, 0xdd, 0xcf,
0xbe, 0xef, 0xbe, 0xdf, 0xbe, 0xef, 0xbe, 0xdf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0xff, 0x5e, 0x55, 0x55, 0xdf, 0x5e, 0x55, 0x55, 0xdf,
0x3c, 0x00, 0x80, 0xcf, 0x7c, 0x55, 0xd5, 0xcf, 0xf8, 0x54, 0xe5, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0};
const unsigned char Grinning_Smiling_Eyes[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x52,
0x4A, 0x02, 0x40, 0xFA, 0x5F, 0x0A, 0x50, 0x0A, 0x50, 0x12, 0x48,
0x24, 0x24, 0xC4, 0x23, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
const unsigned char question[] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x00, 0x80, 0xFF, 0x01, 0x00, 0xC0, 0xFF, 0x07, 0x00, 0xE0, 0xFF, 0x07, 0x00,
0xE0, 0xC3, 0x0F, 0x00, 0xF0, 0x81, 0x0F, 0x00, 0xF0, 0x01, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x80, 0x0F, 0x00,
0x00, 0xC0, 0x0F, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0xF8, 0x01, 0x00, 0x00, 0x7C, 0x00, 0x00,
0x00, 0x3C, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x3E, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
};
const unsigned char heart_smile[] PROGMEM = {0x00, 0x00, 0x6C, 0x07, 0x7C, 0x18, 0x7C, 0x20, 0x38, 0x24, 0x52,
0x0A, 0x02, 0xD8, 0x02, 0xF8, 0x22, 0xFC, 0x20, 0x74, 0xDB, 0x23,
0x1F, 0x00, 0x1F, 0x20, 0x0E, 0x18, 0xE4, 0x07, 0x00, 0x00};
const unsigned char bang[] PROGMEM = {
0xFF, 0x0F, 0xFC, 0x3F, 0xFF, 0x0F, 0xFC, 0x3F, 0xFF, 0x0F, 0xFC, 0x3F, 0xFF, 0x07, 0xF8, 0x3F, 0xFF, 0x07, 0xF8, 0x3F,
0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F,
0xFE, 0x03, 0xF0, 0x1F, 0xFE, 0x03, 0xF0, 0x1F, 0xFC, 0x03, 0xF0, 0x0F, 0xFC, 0x03, 0xF0, 0x0F, 0xFC, 0x03, 0xF0, 0x0F,
0xFC, 0x03, 0xF0, 0x0F, 0xFC, 0x03, 0xF0, 0x0F, 0xFC, 0x03, 0xF0, 0x0F, 0xFC, 0x01, 0xE0, 0x0F, 0xFC, 0x01, 0xE0, 0x0F,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0xC0, 0x03, 0xFC, 0x03, 0xF0, 0x0F, 0xFE, 0x03, 0xF0, 0x1F,
0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F, 0xFC, 0x03, 0xF0, 0x0F, 0xF8, 0x01, 0xE0, 0x07,
};
const unsigned char Heart_eyes[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x54, 0x2A, 0xFA,
0x5F, 0x72, 0x4E, 0x22, 0x44, 0x02, 0x40, 0x12, 0x48, 0x12, 0x48,
0x24, 0x24, 0xC4, 0x23, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
const unsigned char haha[] PROGMEM = {
0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0x7f, 0xc0, 0xe0, 0xf9, 0xf3, 0xc0,
0xf0, 0xfe, 0xef, 0xc1, 0x38, 0xff, 0x9f, 0xc3, 0xd8, 0xff, 0x7f, 0xc3, 0xfc, 0xf8, 0xe3, 0xc7, 0x7c, 0xf7, 0xdd, 0xcf,
0xbe, 0xef, 0xbe, 0xcf, 0xfe, 0xff, 0xff, 0xcf, 0xef, 0xff, 0xff, 0xde, 0xe7, 0xff, 0xff, 0xdc, 0xeb, 0xff, 0xff, 0xda,
0xed, 0xff, 0xff, 0xd6, 0xee, 0xff, 0xff, 0xce, 0x36, 0x00, 0x80, 0xcd, 0xb8, 0xff, 0xbf, 0xc3, 0x7e, 0x00, 0xc0, 0xdf,
0x7c, 0x00, 0xc0, 0xcf, 0xfc, 0x00, 0xe0, 0xcf, 0xf8, 0x01, 0xf0, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0};
const unsigned char question[] PROGMEM = {0xE0, 0x07, 0x10, 0x08, 0x08, 0x10, 0x88, 0x11, 0x48, 0x12, 0x48,
0x12, 0x48, 0x12, 0x30, 0x11, 0x80, 0x08, 0x40, 0x04, 0x40, 0x02,
0xC0, 0x03, 0x00, 0x00, 0xC0, 0x03, 0x40, 0x02, 0x80, 0x01};
const unsigned char ROFL[] PROGMEM = {
0x00, 0x00, 0x00, 0xc0, 0x00, 0xfc, 0x07, 0xc0, 0x00, 0xff, 0x1f, 0xc0, 0x80, 0xff, 0x7f, 0xc0, 0xc0, 0xff, 0xff, 0xc0,
0xe0, 0x9f, 0xff, 0xc1, 0xf0, 0x9f, 0xff, 0xc0, 0xf8, 0x9f, 0x7f, 0xcb, 0xf8, 0x9f, 0xbf, 0xcb, 0xfc, 0x9f, 0xdf, 0xdb,
0xfc, 0x1f, 0x08, 0xdc, 0xfe, 0x1f, 0xf8, 0xfe, 0xfe, 0xff, 0xff, 0xfe, 0x1e, 0xf0, 0x7f, 0xfe, 0x1e, 0xf0, 0xbf, 0xfe,
0xfe, 0xf3, 0xdf, 0xfe, 0xfe, 0xf3, 0x6f, 0xfe, 0xfe, 0xf3, 0x37, 0xfe, 0xfe, 0xeb, 0x1b, 0xfe, 0xfc, 0xef, 0x0d, 0xde,
0xfc, 0xe7, 0x06, 0xcf, 0xf8, 0x6b, 0x83, 0xcf, 0xf8, 0x0d, 0xc0, 0xc7, 0xf0, 0xed, 0xff, 0xc7, 0xe0, 0xee, 0xff, 0xc3,
0xc0, 0xee, 0xff, 0xc1, 0x80, 0xee, 0xff, 0xc0, 0x00, 0xe6, 0x3f, 0xc0, 0x00, 0xf0, 0x0f, 0xc0, 0x00, 0x00, 0x00, 0xc0};
const unsigned char bang[] PROGMEM = {0x30, 0x0C, 0x48, 0x12, 0x48, 0x12, 0x48, 0x12, 0x48, 0x12, 0x48,
0x12, 0x48, 0x12, 0x48, 0x12, 0x48, 0x12, 0x48, 0x12, 0x30, 0x0C,
0x00, 0x00, 0x30, 0x0C, 0x48, 0x12, 0x30, 0x0C, 0x00, 0x00};
const unsigned char Smiling_Closed_Eyes[] PROGMEM = {
0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0xff, 0xc0, 0xe0, 0xff, 0xff, 0xc1,
0xf0, 0xff, 0xff, 0xc3, 0xf8, 0xff, 0xff, 0xc7, 0xf8, 0xff, 0xff, 0xcf, 0x7c, 0xfe, 0xcf, 0xcf, 0xfc, 0xfc, 0xe7, 0xcf,
0xfe, 0xf9, 0xf3, 0xdf, 0xfe, 0xf3, 0xf9, 0xdf, 0xff, 0xf9, 0xf3, 0xff, 0xff, 0xfc, 0xe7, 0xff, 0x7f, 0xfe, 0xcf, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x80, 0xff, 0xbe, 0xff, 0xbf, 0xdf, 0x7e, 0x00, 0xc0, 0xdf,
0x7c, 0x00, 0xc0, 0xcf, 0xfc, 0x00, 0xe0, 0xcf, 0xf8, 0x01, 0xf0, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0};
const unsigned char haha[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x52,
0x4A, 0x0A, 0x50, 0x0E, 0x70, 0xF2, 0x4F, 0x12, 0x48, 0x32, 0x44,
0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
const unsigned char Grinning_SmilingEyes2[] PROGMEM = {
0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0x7f, 0xc0, 0xe0, 0xff, 0xff, 0xc0,
0xf0, 0xff, 0xff, 0xc1, 0xf8, 0xff, 0xff, 0xc3, 0xf8, 0xff, 0xff, 0xc3, 0xfc, 0xf8, 0xe3, 0xc7, 0x7c, 0xf7, 0xdd, 0xc7,
0xbe, 0xef, 0xbe, 0xcf, 0xfe, 0xff, 0xff, 0xcf, 0xff, 0xff, 0xff, 0xdf, 0xff, 0xff, 0xff, 0xdf, 0xff, 0xff, 0xff, 0xdf,
0xff, 0xff, 0xff, 0xdf, 0xff, 0xff, 0xff, 0xdf, 0x3f, 0x00, 0x80, 0xdf, 0xbe, 0xff, 0xbf, 0xcf, 0x7e, 0x00, 0xc0, 0xcf,
0x7c, 0x00, 0xc0, 0xc7, 0xfc, 0x00, 0xe0, 0xc7, 0xf8, 0x01, 0xf0, 0xc3, 0xf8, 0x03, 0xf8, 0xc3, 0xf0, 0xff, 0xff, 0xc1,
0xe0, 0xff, 0xff, 0xc0, 0xc0, 0xff, 0x7f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0};
const unsigned char ROFL[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x84, 0x21, 0x84, 0x20, 0x02,
0x4C, 0x02, 0x4A, 0x1A, 0x49, 0x8A, 0x48, 0x42, 0x48, 0x22, 0x44,
0xE4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
const unsigned char wave_icon[] PROGMEM = {
0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x7f, 0xc0, 0x00, 0x00, 0xc0, 0xc1, 0x00, 0x00, 0x00, 0xc7,
0x00, 0x00, 0x1e, 0xcc, 0x00, 0x00, 0x30, 0xc8, 0x00, 0x00, 0x60, 0xd8, 0x00, 0x08, 0xc0, 0xd0, 0x00, 0x1a, 0x81, 0xd1,
0x00, 0x36, 0x03, 0xd3, 0x80, 0x6d, 0x06, 0xd2, 0x00, 0xdb, 0x0c, 0xc2, 0x80, 0xb6, 0x1d, 0xc0, 0x80, 0x6d, 0x1f, 0xc0,
0x00, 0xdb, 0x3f, 0xc0, 0x00, 0xf6, 0x7f, 0xc0, 0x00, 0xfc, 0x7f, 0xc0, 0x08, 0xf8, 0x7f, 0xc0, 0x48, 0xf0, 0x7f, 0xc0,
0x48, 0xe0, 0x7f, 0xc0, 0xc8, 0xc0, 0x3f, 0xc0, 0x98, 0x81, 0x1f, 0xc0, 0x10, 0x03, 0x00, 0xc0, 0x30, 0x0e, 0x00, 0xc0,
0x20, 0x38, 0x00, 0xc0, 0xe0, 0x00, 0x00, 0xc0, 0x80, 0x07, 0x00, 0xc0, 0x00, 0x1e, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0};
const unsigned char Smiling_Closed_Eyes[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x42,
0x42, 0x22, 0x44, 0x02, 0x40, 0xF2, 0x4F, 0x12, 0x48, 0x22, 0x44,
0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
const unsigned char cowboy[] PROGMEM = {
0x00, 0x0c, 0x0c, 0xc0, 0x00, 0x02, 0x10, 0xc0, 0x00, 0x01, 0x20, 0xc0, 0xbc, 0x00, 0x40, 0xcf, 0xc2, 0x01, 0xe0, 0xd0,
0x01, 0x01, 0x20, 0xe0, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0,
0xc1, 0x3f, 0xff, 0xe0, 0xe1, 0xff, 0xff, 0xe1, 0xf2, 0xf3, 0xf3, 0xd3, 0xf4, 0xf1, 0xe3, 0xcb, 0xfc, 0xf1, 0xe3, 0xc7,
0xf8, 0xf1, 0xe3, 0xc7, 0xf8, 0xf1, 0xe3, 0xc7, 0xf8, 0xfb, 0xf7, 0xc7, 0xf8, 0xff, 0xff, 0xc7, 0xf8, 0xff, 0xff, 0xc7,
0x70, 0xf8, 0x8f, 0xc3, 0x70, 0x03, 0xb0, 0xc3, 0x70, 0xfe, 0xbf, 0xc3, 0x60, 0x00, 0x80, 0xc1, 0xc0, 0x00, 0xc0, 0xc0,
0x80, 0x01, 0x60, 0xc0, 0x00, 0x07, 0x38, 0xc0, 0x00, 0xfe, 0x1f, 0xc0, 0x00, 0xf0, 0x03, 0xc0, 0x00, 0x00, 0x00, 0xc0};
const unsigned char Grinning_SmilingEyes2[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x52,
0x4A, 0x02, 0x40, 0x02, 0x40, 0xF2, 0x4F, 0x12, 0x48, 0x22, 0x44,
0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
const unsigned char deadmau5[] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x07, 0x00,
0x00, 0xFC, 0x03, 0x00, 0x00, 0xFF, 0x3F, 0x00, 0x80, 0xFF, 0x0F, 0x00, 0xC0, 0xFF, 0xFF, 0x00, 0xE0, 0xFF, 0x3F, 0x00,
0xE0, 0xFF, 0xFF, 0x01, 0xF0, 0xFF, 0x7F, 0x00, 0xF0, 0xFF, 0xFF, 0x03, 0xF8, 0xFF, 0xFF, 0x00, 0xF0, 0xFF, 0xFF, 0x07,
0xFC, 0xFF, 0xFF, 0x00, 0xF0, 0xFF, 0xFF, 0x0F, 0xFC, 0xFF, 0xFF, 0x00, 0xF0, 0xFF, 0xFF, 0x0F, 0xFE, 0xFF, 0xFF, 0x00,
0xF0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0xF0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0xE0, 0xFF, 0x3F, 0xFC,
0x0F, 0xFF, 0x7F, 0x00, 0xC0, 0xFF, 0x1F, 0xF8, 0x0F, 0xFC, 0x3F, 0x00, 0x80, 0xFF, 0x0F, 0xF8, 0x1F, 0xFC, 0x1F, 0x00,
0x00, 0xFF, 0x0F, 0xFC, 0x3F, 0xFC, 0x0F, 0x00, 0x00, 0xF8, 0x1F, 0xFF, 0xFF, 0xFE, 0x01, 0x00, 0x00, 0x00, 0xFC, 0xFF,
0xFF, 0x07, 0x00, 0x00, 0x00, 0x00, 0xFC, 0xFF, 0xFF, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00,
0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0xC0, 0x00, 0x00, 0x00,
0x00, 0x00, 0x80, 0x07, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
};
const unsigned char Loudly_Crying_Face[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x34, 0x2C, 0x4A,
0x52, 0x12, 0x48, 0x12, 0x48, 0x92, 0x49, 0x52, 0x4A, 0x52, 0x4A,
0x54, 0x2A, 0x94, 0x29, 0x18, 0x18, 0xF0, 0x0F, 0x00, 0x00};
const unsigned char sun[] PROGMEM = {
0x00, 0xC0, 0x00, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x30, 0xC0, 0x00, 0x03,
0x70, 0x00, 0x80, 0x03, 0xF0, 0x00, 0xC0, 0x03, 0xF0, 0xF8, 0xC7, 0x03, 0xE0, 0xFC, 0xCF, 0x01, 0x00, 0xFE, 0x1F, 0x00,
0x00, 0xFF, 0x3F, 0x00, 0x80, 0xFF, 0x7F, 0x00, 0x80, 0xFF, 0x7F, 0x00, 0x8E, 0xFF, 0x7F, 0x1C, 0x9F, 0xFF, 0x7F, 0x3E,
0x9F, 0xFF, 0x7F, 0x3E, 0x8E, 0xFF, 0x7F, 0x1C, 0x80, 0xFF, 0x7F, 0x00, 0x80, 0xFF, 0x7F, 0x00, 0x00, 0xFF, 0x3F, 0x00,
0x00, 0xFE, 0x1F, 0x00, 0x00, 0xFC, 0x0F, 0x00, 0xC0, 0xF9, 0xE7, 0x00, 0xE0, 0x01, 0xE0, 0x01, 0xF0, 0x01, 0xE0, 0x03,
0xF0, 0xC0, 0xC0, 0x03, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xC0, 0x00, 0x00,
};
const unsigned char wave_icon[] PROGMEM = {0x00, 0x00, 0xC0, 0x18, 0x30, 0x21, 0x48, 0x5A, 0x94, 0x64, 0x24,
0x25, 0x4A, 0x24, 0x12, 0x44, 0x22, 0x44, 0x04, 0x40, 0x08, 0x40,
0x12, 0x40, 0x22, 0x20, 0xC4, 0x10, 0x18, 0x0F, 0x00, 0x00};
const unsigned char rain[] PROGMEM = {
0xC0, 0x0F, 0xC0, 0x00, 0x40, 0x00, 0x80, 0x00, 0x20, 0x00, 0x80, 0x00, 0x20, 0x00, 0x80, 0x03, 0x38, 0x00,
0x00, 0x0E, 0x0C, 0x00, 0x00, 0x18, 0x02, 0x00, 0x00, 0x10, 0x03, 0x00, 0x00, 0x30, 0x01, 0x00, 0x00, 0x20,
0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x03, 0x00, 0x00, 0x30, 0x02, 0x00,
0x00, 0x10, 0x06, 0x00, 0x00, 0x08, 0xFC, 0xFF, 0xFF, 0x07, 0xF0, 0xFF, 0xFF, 0x01, 0x80, 0x00, 0x01, 0x00,
0xC0, 0xC0, 0x81, 0x03, 0xA0, 0x60, 0xC1, 0x03, 0x90, 0x20, 0x41, 0x01, 0xF0, 0xE0, 0xC0, 0x01, 0x60, 0x4C,
0x98, 0x00, 0x00, 0x0E, 0x1C, 0x00, 0x00, 0x0B, 0x12, 0x00, 0x00, 0x09, 0x1A, 0x00, 0x00, 0x06, 0x0E, 0x00,
};
const unsigned char cowboy[] PROGMEM = {0x70, 0x0E, 0x8F, 0xF1, 0x11, 0x88, 0x21, 0x84, 0xC2, 0x43, 0x1E,
0x78, 0xE2, 0x47, 0x42, 0x42, 0x12, 0x48, 0x12, 0x48, 0x22, 0x44,
0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
const unsigned char cloud[] PROGMEM = {
0x00, 0x80, 0x07, 0x00, 0x00, 0xE0, 0x1F, 0x00, 0x00, 0x70, 0x30, 0x00, 0x00, 0x10, 0x60, 0x00, 0x80, 0x1F, 0x40, 0x00,
0xC0, 0x0F, 0xC0, 0x00, 0xC0, 0x00, 0x80, 0x00, 0x60, 0x00, 0x80, 0x00, 0x20, 0x00, 0x80, 0x00, 0x20, 0x00, 0x80, 0x01,
0x20, 0x00, 0x00, 0x07, 0x38, 0x00, 0x00, 0x0C, 0x0C, 0x00, 0x00, 0x08, 0x06, 0x00, 0x00, 0x18, 0x02, 0x00, 0x00, 0x10,
0x02, 0x00, 0x00, 0x30, 0x03, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20,
0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x30, 0x03, 0x00, 0x00, 0x10,
0x02, 0x00, 0x00, 0x10, 0x06, 0x00, 0x00, 0x18, 0x0C, 0x00, 0x00, 0x0C, 0xFC, 0xFF, 0xFF, 0x07, 0xF0, 0xFF, 0xFF, 0x03,
};
const unsigned char deadmau5[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0xE4, 0x27, 0x12, 0x48, 0x0A,
0x50, 0x0E, 0x70, 0x11, 0x88, 0x19, 0x98, 0x19, 0x98, 0x19, 0x98,
0x19, 0x98, 0x19, 0x98, 0x11, 0x88, 0x0E, 0x70, 0x00, 0x00};
const unsigned char fog[] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x3C, 0x00, 0xFE, 0x01, 0xFF, 0x00, 0x87, 0xC7, 0xC3, 0x01, 0x03, 0xFE, 0x80, 0x01,
0x00, 0x38, 0x00, 0x00, 0xFC, 0x00, 0x7E, 0x00, 0xFF, 0x83, 0xFF, 0x01, 0x03, 0xFF, 0x81, 0x01, 0x00, 0x7C, 0x00, 0x00,
0xF8, 0x00, 0x3E, 0x00, 0xFE, 0x01, 0xFF, 0x00, 0x87, 0xC7, 0xC3, 0x01, 0x03, 0xFE, 0x80, 0x01, 0x00, 0x38, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
};
const unsigned char sun[] PROGMEM = {0x00, 0x00, 0x80, 0x01, 0xEC, 0x37, 0xFC, 0x3F, 0xF8, 0x1F, 0xFC,
0x3F, 0xFE, 0x7F, 0xFC, 0x3F, 0xFC, 0x3F, 0xFE, 0x7F, 0xFC, 0x3F,
0xF8, 0x1F, 0xFC, 0x3F, 0xEC, 0x37, 0x80, 0x01, 0x00, 0x00};
const unsigned char devil[] PROGMEM = {
0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0, 0x01, 0x00, 0x00, 0xe0, 0x03, 0x00, 0x00, 0xf0, 0x0f, 0xfc, 0x0f, 0xfc,
0x3f, 0xff, 0x3f, 0xff, 0xfe, 0xff, 0xff, 0xdf, 0xfe, 0xff, 0xff, 0xdf, 0xfe, 0xff, 0xff, 0xdf, 0xfc, 0xff, 0xff, 0xcf,
0xfc, 0xff, 0xff, 0xcf, 0xf8, 0xff, 0xff, 0xc7, 0xf0, 0xff, 0xff, 0xc3, 0xf0, 0xff, 0xff, 0xc3, 0xf0, 0xf1, 0xe3, 0xc3,
0xf0, 0xe7, 0xf9, 0xc3, 0xf0, 0xe7, 0xf9, 0xc3, 0xf0, 0xe3, 0xf1, 0xc3, 0xf0, 0xe3, 0xf1, 0xc3, 0xf0, 0xe7, 0xf9, 0xc3,
0xf0, 0xff, 0xff, 0xc3, 0xe0, 0xfd, 0xef, 0xc1, 0xe0, 0xf3, 0xf3, 0xc1, 0xc0, 0x07, 0xf8, 0xc0, 0x80, 0x1f, 0x7e, 0xc0,
0x00, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0};
const unsigned char rain[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x38, 0x1F, 0xFC, 0x3F, 0xFE,
0x7F, 0xFE, 0x7F, 0xFE, 0x7F, 0xFC, 0x3F, 0x00, 0x00, 0x48, 0x12,
0x48, 0x12, 0x24, 0x09, 0x24, 0x09, 0x00, 0x00, 0x00, 0x00};
const unsigned char heart[] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0xC0, 0x03, 0xF0, 0x00, 0xF8, 0x0F, 0xFC, 0x07, 0xFC, 0x1F, 0x06, 0x0E, 0xFE, 0x3F, 0x03, 0x18,
0xFE, 0xFF, 0x7F, 0x10, 0xFF, 0xFF, 0xFF, 0x31, 0xFF, 0xFF, 0xFF, 0x33, 0xFF, 0xFF, 0xFF, 0x37, 0xFF, 0xFF, 0xFF, 0x37,
0xFF, 0xFF, 0xFF, 0x3F, 0xFF, 0xFF, 0xFF, 0x3F, 0xFF, 0xFF, 0xFF, 0x3F, 0xFE, 0xFF, 0xFF, 0x1F, 0xFE, 0xFF, 0xFF, 0x1F,
0xFC, 0xFF, 0xFF, 0x0F, 0xFC, 0xFF, 0xFF, 0x0F, 0xF8, 0xFF, 0xFF, 0x07, 0xF0, 0xFF, 0xFF, 0x03, 0xF0, 0xFF, 0xFF, 0x03,
0xE0, 0xFF, 0xFF, 0x01, 0xC0, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0x7F, 0x00, 0x00, 0xFF, 0x3F, 0x00, 0x00, 0xFE, 0x1F, 0x00,
0x00, 0xFC, 0x0F, 0x00, 0x00, 0xF8, 0x07, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0x80, 0x00, 0x00,
};
const unsigned char cloud[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x38, 0x1F, 0xFC,
0x3F, 0xFE, 0x7F, 0xFE, 0x7F, 0xFE, 0x7F, 0xFC, 0x3F, 0xF8, 0x1F,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
const unsigned char poo[] PROGMEM = {
0x00, 0x1c, 0x00, 0xc0, 0x00, 0x7c, 0x00, 0xc0, 0x00, 0xfc, 0x00, 0xc0, 0x00, 0x7c, 0x03, 0xc0, 0x00, 0xbe, 0x03, 0xc0,
0x00, 0xdf, 0x0f, 0xc0, 0x80, 0xcf, 0x0f, 0xc0, 0xc0, 0xf1, 0x0f, 0xc0, 0x60, 0xfc, 0x0f, 0xc0, 0x30, 0xff, 0x07, 0xc0,
0x90, 0xff, 0x3b, 0xc0, 0xc0, 0xff, 0x7d, 0xc0, 0xf8, 0xff, 0xfc, 0xc0, 0xf8, 0x3f, 0xf0, 0xc0, 0x78, 0x88, 0xc0, 0xc0,
0x20, 0xe3, 0x18, 0xc0, 0x98, 0xe7, 0xbc, 0xc1, 0x9c, 0x64, 0xa4, 0xc3, 0x9e, 0x64, 0xa4, 0xc7, 0xbe, 0xe4, 0xa4, 0xc7,
0xbc, 0x27, 0xbc, 0xc7, 0x38, 0x03, 0xd9, 0xc3, 0x00, 0xf0, 0x63, 0xc0, 0xf8, 0xfc, 0x3f, 0xcf, 0xfc, 0xff, 0x87, 0xdf,
0xfe, 0xff, 0xe0, 0xdf, 0xfc, 0x1f, 0xfe, 0xdf, 0xf8, 0x07, 0xf8, 0xcf, 0xf0, 0x03, 0xe0, 0xc7, 0x00, 0x00, 0x00, 0xc0};
const unsigned char fog[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x88, 0x88, 0x54, 0x55, 0x22, 0x22, 0x00,
0x00, 0x44, 0x44, 0xAA, 0x2A, 0x11, 0x11, 0x00, 0x00, 0x88, 0x88,
0x54, 0x55, 0x22, 0x22, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
const unsigned char bell_icon[] PROGMEM = {
0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b11110000,
0b00000011, 0b00000000, 0b00000000, 0b11111100, 0b00001111, 0b00000000, 0b00000000, 0b00001111, 0b00111100, 0b00000000,
0b00000000, 0b00000011, 0b00110000, 0b00000000, 0b10000000, 0b00000001, 0b01100000, 0b00000000, 0b11000000, 0b00000000,
0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000,
0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000,
0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000,
0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b01000000, 0b00000000, 0b10000000, 0b00000000, 0b01100000, 0b00000000,
0b10000000, 0b00000001, 0b01110000, 0b00000000, 0b10000000, 0b00000011, 0b00110000, 0b00000000, 0b00000000, 0b00000011,
0b00011000, 0b00000000, 0b00000000, 0b00000110, 0b11110000, 0b11111111, 0b11111111, 0b00000011, 0b00000000, 0b00001100,
0b00001100, 0b00000000, 0b00000000, 0b00011000, 0b00000110, 0b00000000, 0b00000000, 0b11111000, 0b00000111, 0b00000000,
0b00000000, 0b11100000, 0b00000001, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000,
0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000};
const unsigned char devil[] PROGMEM = {0x06, 0x60, 0xCA, 0x53, 0x32, 0x4C, 0x22, 0x44, 0x44, 0x22, 0x3A,
0x5C, 0x32, 0x4C, 0x52, 0x4A, 0x72, 0x4E, 0x02, 0x40, 0x22, 0x44,
0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
const unsigned char heart[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x3C, 0x3C, 0x7E, 0x7E, 0xFE, 0x7F, 0xFE,
0x7F, 0xFE, 0x7F, 0xFE, 0x7F, 0xFC, 0x3F, 0xF8, 0x1F, 0xF8, 0x1F,
0xF0, 0x0F, 0xE0, 0x07, 0xC0, 0x03, 0x80, 0x01, 0x00, 0x00};
const unsigned char poo[] PROGMEM = {0x00, 0x00, 0x80, 0x01, 0x40, 0x02, 0x20, 0x04, 0x10, 0x04, 0xF0,
0x08, 0x10, 0x10, 0x48, 0x12, 0x08, 0x18, 0xE8, 0x21, 0x1C, 0x40,
0x42, 0x42, 0x82, 0x41, 0x02, 0x30, 0xFC, 0x0F, 0x00, 0x00};
const unsigned char bell_icon[] PROGMEM = {0x00, 0x00, 0x80, 0x01, 0x80, 0x01, 0xE0, 0x07, 0xF0, 0x0F, 0xF0,
0x0F, 0xF8, 0x1F, 0xF8, 0x1F, 0xF8, 0x1F, 0xF8, 0x1F, 0xFC, 0x3F,
0xFC, 0x3F, 0xFE, 0x7F, 0xFE, 0x7F, 0x80, 0x01, 0x00, 0x00};
const unsigned char cookie[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x34, 0x22, 0x32,
0x40, 0x02, 0x58, 0x82, 0x5B, 0x92, 0x43, 0x82, 0x43, 0x02, 0x40,
0x64, 0x28, 0x64, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
const unsigned char Fire[] PROGMEM = {0x30, 0x00, 0xF0, 0x00, 0xF8, 0x03, 0xF8, 0x07, 0xFC, 0x1F, 0xFC,
0x1F, 0xFE, 0x3E, 0x7E, 0x3E, 0x3E, 0x7C, 0x1E, 0x78, 0x1E, 0x70,
0x1C, 0x70, 0x1C, 0x70, 0x38, 0x38, 0x30, 0x38, 0x60, 0x0C};
const unsigned char peace_sign[] PROGMEM = {0xC0, 0x30, 0x40, 0x29, 0x40, 0x25, 0x40, 0x15, 0x40, 0x12, 0x38,
0x0A, 0x54, 0x68, 0x54, 0x58, 0x54, 0x44, 0x3C, 0x22, 0x04, 0x22,
0x04, 0x12, 0x08, 0x10, 0x10, 0x08, 0xE0, 0x07, 0x00, 0x00};
const unsigned char Praying[] PROGMEM = {0x00, 0x00, 0x40, 0x02, 0xA0, 0x05, 0x90, 0x09, 0x90, 0x09, 0x90,
0x09, 0x98, 0x19, 0x94, 0x29, 0xA4, 0x25, 0xA4, 0x25, 0x84, 0x21,
0x84, 0x21, 0x86, 0x61, 0x4E, 0x72, 0x7F, 0x7E, 0x3F, 0xFC};
const unsigned char Sparkles[] PROGMEM = {0x00, 0x00, 0x10, 0x00, 0x38, 0x04, 0x10, 0x04, 0x00, 0x0E, 0x00,
0x1F, 0x80, 0x3F, 0xE0, 0xFF, 0x80, 0x3F, 0x10, 0x1F, 0x10, 0x0E,
0x38, 0x04, 0xFE, 0x04, 0x38, 0x00, 0x10, 0x00, 0x10, 0x00};
const unsigned char clown[] PROGMEM = {0x00, 0x00, 0xEE, 0x77, 0x1A, 0x58, 0x06, 0x60, 0x24, 0x24, 0x72,
0x4E, 0x22, 0x44, 0x82, 0x41, 0x82, 0x41, 0x1A, 0x58, 0xF2, 0x4F,
0x14, 0x28, 0xE4, 0x27, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
const unsigned char robo[] PROGMEM = {0x80, 0x01, 0xC0, 0x03, 0x80, 0x01, 0xFC, 0x3F, 0x04, 0x20, 0x74,
0x2E, 0x52, 0x4A, 0x72, 0x4E, 0x02, 0x40, 0x02, 0x40, 0xA2, 0x4A,
0x52, 0x45, 0x04, 0x20, 0x04, 0x20, 0xFC, 0x3F, 0x00, 0x00};
const unsigned char hole[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x0F, 0x3C, 0x3C,
0x06, 0x60, 0x0C, 0x30, 0xF0, 0x0F, 0x00, 0x00, 0x00, 0x00};
const unsigned char bowling[] PROGMEM = {0x00, 0x38, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00,
0x38, 0x00, 0x28, 0x78, 0x44, 0x84, 0x82, 0x22, 0x83, 0x52, 0x83,
0x02, 0x83, 0x02, 0x45, 0x84, 0x44, 0x78, 0x38, 0x00, 0x00};
const unsigned char vulcan_salute[] PROGMEM = {0x08, 0x02, 0x16, 0x0D, 0x15, 0x15, 0x15, 0x15, 0xA9, 0x12, 0x4A,
0x0A, 0x02, 0x38, 0x04, 0x48, 0x04, 0x44, 0x04, 0x22, 0x04, 0x22,
0x04, 0x12, 0x08, 0x10, 0x10, 0x08, 0xE0, 0x07, 0x00, 0x00};
#endif
} // namespace graphics
+99 -47
View File
@@ -17,98 +17,150 @@ extern const int numEmotes;
#ifndef EXCLUDE_EMOJI
// === Emote Bitmaps ===
#define thumbs_height 25
#define thumbs_width 25
#define thumbs_height 16
#define thumbs_width 16
extern const unsigned char thumbup[] PROGMEM;
extern const unsigned char thumbdown[] PROGMEM;
#define Smiling_Eyes_height 30
#define Smiling_Eyes_width 30
#define Smiling_Eyes_height 16
#define Smiling_Eyes_width 16
extern const unsigned char Smiling_Eyes[] PROGMEM;
#define Grinning_height 30
#define Grinning_width 30
#define Grinning_height 16
#define Grinning_width 16
extern const unsigned char Grinning[] PROGMEM;
#define Slightly_Smiling_height 30
#define Slightly_Smiling_width 30
#define Slightly_Smiling_height 16
#define Slightly_Smiling_width 16
extern const unsigned char Slightly_Smiling[] PROGMEM;
#define Winking_Face_height 30
#define Winking_Face_width 30
#define Winking_Face_height 16
#define Winking_Face_width 16
extern const unsigned char Winking_Face[] PROGMEM;
#define Grinning_Smiling_Eyes_height 30
#define Grinning_Smiling_Eyes_width 30
#define Grinning_Smiling_Eyes_height 16
#define Grinning_Smiling_Eyes_width 16
extern const unsigned char Grinning_Smiling_Eyes[] PROGMEM;
#define question_height 25
#define question_width 25
#define heart_smile_height 16
#define heart_smile_width 16
extern const unsigned char heart_smile[] PROGMEM;
#define Heart_eyes_height 16
#define Heart_eyes_width 16
extern const unsigned char Heart_eyes[] PROGMEM;
#define question_height 16
#define question_width 16
extern const unsigned char question[] PROGMEM;
#define bang_height 30
#define bang_width 30
#define bang_height 16
#define bang_width 16
extern const unsigned char bang[] PROGMEM;
#define haha_height 30
#define haha_width 30
#define haha_height 16
#define haha_width 16
extern const unsigned char haha[] PROGMEM;
#define ROFL_height 30
#define ROFL_width 30
#define ROFL_height 16
#define ROFL_width 16
extern const unsigned char ROFL[] PROGMEM;
#define Smiling_Closed_Eyes_height 30
#define Smiling_Closed_Eyes_width 30
#define Smiling_Closed_Eyes_height 16
#define Smiling_Closed_Eyes_width 16
extern const unsigned char Smiling_Closed_Eyes[] PROGMEM;
#define Grinning_SmilingEyes2_height 30
#define Grinning_SmilingEyes2_width 30
#define Grinning_SmilingEyes2_height 16
#define Grinning_SmilingEyes2_width 16
extern const unsigned char Grinning_SmilingEyes2[] PROGMEM;
#define wave_icon_height 30
#define wave_icon_width 30
#define Loudly_Crying_Face_height 16
#define Loudly_Crying_Face_width 16
extern const unsigned char Loudly_Crying_Face[] PROGMEM;
#define wave_icon_height 16
#define wave_icon_width 16
extern const unsigned char wave_icon[] PROGMEM;
#define cowboy_height 30
#define cowboy_width 30
#define cowboy_height 16
#define cowboy_width 16
extern const unsigned char cowboy[] PROGMEM;
#define deadmau5_height 30
#define deadmau5_width 60
#define deadmau5_height 16
#define deadmau5_width 16
extern const unsigned char deadmau5[] PROGMEM;
#define sun_height 30
#define sun_width 30
#define sun_height 16
#define sun_width 16
extern const unsigned char sun[] PROGMEM;
#define rain_height 30
#define rain_width 30
#define rain_height 16
#define rain_width 16
extern const unsigned char rain[] PROGMEM;
#define cloud_height 30
#define cloud_width 30
#define cloud_height 16
#define cloud_width 16
extern const unsigned char cloud[] PROGMEM;
#define fog_height 25
#define fog_width 25
#define fog_height 16
#define fog_width 16
extern const unsigned char fog[] PROGMEM;
#define devil_height 30
#define devil_width 30
#define devil_height 16
#define devil_width 16
extern const unsigned char devil[] PROGMEM;
#define heart_height 30
#define heart_width 30
#define heart_height 16
#define heart_width 16
extern const unsigned char heart[] PROGMEM;
#define poo_height 30
#define poo_width 30
#define poo_height 16
#define poo_width 16
extern const unsigned char poo[] PROGMEM;
#define bell_icon_width 30
#define bell_icon_height 30
#define bell_icon_width 16
#define bell_icon_height 16
extern const unsigned char bell_icon[] PROGMEM;
#define cookie_width 16
#define cookie_height 16
extern const unsigned char cookie[] PROGMEM;
#define Fire_width 16
#define Fire_height 16
extern const unsigned char Fire[] PROGMEM;
#define peace_sign_width 16
#define peace_sign_height 16
extern const unsigned char peace_sign[] PROGMEM;
#define Praying_width 16
#define Praying_height 16
extern const unsigned char Praying[] PROGMEM;
#define Sparkles_width 16
#define Sparkles_height 16
extern const unsigned char Sparkles[] PROGMEM;
#define clown_width 16
#define clown_height 16
extern const unsigned char clown[] PROGMEM;
#define robo_width 16
#define robo_height 16
extern const unsigned char robo[] PROGMEM;
#define hole_width 16
#define hole_height 16
extern const unsigned char hole[] PROGMEM;
#define bowling_width 16
#define bowling_height 16
extern const unsigned char bowling[] PROGMEM;
#define vulcan_salute_width 16
#define vulcan_salute_height 16
extern const unsigned char vulcan_salute[] PROGMEM;
#endif // EXCLUDE_EMOJI
} // namespace graphics
} // namespace graphics
@@ -287,7 +287,7 @@ void InkHUD::MapApplet::getMapCenter(float *lat, float *lng)
float easternmost = lngCenter;
float westernmost = lngCenter;
for (uint8_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
for (size_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
meshtastic_NodeInfoLite *node = nodeDB->getMeshNodeByIndex(i);
// Skip if no position
@@ -474,8 +474,8 @@ void InkHUD::MapApplet::drawLabeledMarker(meshtastic_NodeInfoLite *node)
// Need at least two, to draw a sensible map
bool InkHUD::MapApplet::enoughMarkers()
{
uint8_t count = 0;
for (uint8_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
size_t count = 0;
for (size_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
meshtastic_NodeInfoLite *node = nodeDB->getMeshNodeByIndex(i);
// Count nodes
+1 -1
View File
@@ -52,7 +52,7 @@ int InputBroker::handleInputEvent(const InputEvent *event)
powerFSM.trigger(EVENT_INPUT); // todo: not every input should wake, like long hold release
if (event && event->inputEvent != INPUT_BROKER_NONE && externalNotificationModule &&
moduleConfig.external_notification.enabled && externalNotificationModule->nagging()) {
moduleConfig.external_notification.enabled) {
externalNotificationModule->stopNow();
}
+1 -1
View File
@@ -1401,7 +1401,7 @@ void setup()
#endif
// check if the radio chip matches the selected region
if ((config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24) && (!rIf->wideLora())) {
if ((config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24) && rIf && (!rIf->wideLora())) {
LOG_WARN("LoRa chip does not support 2.4GHz. Revert to unset");
config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_UNSET;
nodeDB->saveToDisk(SEGMENT_CONFIG);
+5 -1
View File
@@ -29,6 +29,7 @@
#else
#define default_ringtone_nag_secs 15
#endif
#define default_network_ipv6_enabled false
#define default_mqtt_address "mqtt.meshtastic.org"
#define default_mqtt_username "meshdev"
@@ -46,12 +47,15 @@ class Default
static uint32_t getConfiguredOrDefaultMs(uint32_t configuredInterval);
static uint32_t getConfiguredOrDefaultMs(uint32_t configuredInterval, uint32_t defaultInterval);
static uint32_t getConfiguredOrDefault(uint32_t configured, uint32_t defaultValue);
// Note: numOnlineNodes uses uint32_t to match the public API and allow flexibility,
// even though internal node counts use uint16_t (max 65535 nodes)
static uint32_t getConfiguredOrDefaultMsScaled(uint32_t configured, uint32_t defaultValue, uint32_t numOnlineNodes);
static uint8_t getConfiguredOrDefaultHopLimit(uint8_t configured);
static uint32_t getConfiguredOrMinimumValue(uint32_t configured, uint32_t minValue);
private:
static float congestionScalingCoefficient(int numOnlineNodes)
// Note: Kept as uint32_t to match the public API parameter type
static float congestionScalingCoefficient(uint32_t numOnlineNodes)
{
// Increase frequency of broadcasts for small networks regardless of preset
if (numOnlineNodes <= 10) {
+8 -1
View File
@@ -22,4 +22,11 @@ struct RegionInfo {
extern const RegionInfo regions[];
extern const RegionInfo *myRegion;
extern void initRegion();
extern void initRegion();
/**
* Get the effective duty cycle for the current region based on device role.
* For EU_866, returns 10% for fixed devices (ROUTER, ROUTER_LATE) and 2.5% for mobile devices.
* For other regions, returns the standard duty cycle.
*/
extern float getEffectiveDutyCycle();
+7 -1
View File
@@ -653,7 +653,7 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
strncpy(config.network.ntp_server, "meshtastic.pool.ntp.org", 32);
#if (defined(T_DECK) || defined(T_WATCH_S3) || defined(UNPHONE) || defined(PICOMPUTER_S3) || defined(SENSECAP_INDICATOR) || \
defined(ELECROW_PANEL) || defined(HELTEC_V4_TFT)) && \
defined(ELECROW_PANEL)||defined(HELTEC_V4_TFT)) && \
HAS_TFT
// switch BT off by default; use TFT programming mode or hotkey to enable
config.bluetooth.enabled = false;
@@ -718,6 +718,12 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
strncpy(config.network.wifi_psk, USERPREFS_NETWORK_WIFI_PSK, sizeof(config.network.wifi_psk));
#endif
#if defined(USERPREFS_NETWORK_IPV6_ENABLED)
config.network.ipv6_enabled = USERPREFS_NETWORK_IPV6_ENABLED;
#else
config.network.ipv6_enabled = default_network_ipv6_enabled;
#endif
#ifdef DISPLAY_FLIP_SCREEN
config.display.flip_screen = true;
#endif
+1 -1
View File
@@ -13,7 +13,7 @@ template <class T> class ProtobufModule : protected SinglePortModule
const pb_msgdesc_t *fields;
public:
uint8_t numOnlineNodes = 0;
uint16_t numOnlineNodes = 0;
/** Constructor
* name is for debugging output
*/
+47 -7
View File
@@ -187,6 +187,13 @@ const RegionInfo regions[] = {
*/
RDEF(BR_902, 902.0f, 907.5f, 100, 0, 30, true, false, false),
/*
EU 866MHz RFID band (ETSI EN 302 208): 4 channels at 865.7/866.3/866.9/867.5 MHz
475 kHz gap between channels, 27 dBm, duty cycle 2.5% (mobile) or 10% (fixed)
https://www.etsi.org/deliver/etsi_en/302200_302299/302208/03.04.01_60/en_302208v030401p.pdf
*/
RDEF(EU_866, 865.6375f, 867.5625f, 2.5, 0.475, 27, true, false, false),
/*
2.4 GHZ WLAN Band equivalent. Only for SX128x chips.
*/
@@ -219,6 +226,23 @@ void initRegion()
myRegion = r;
}
/**
* Get duty cycle for current region. EU_866: 10% for routers, 2.5% for mobile.
*/
float getEffectiveDutyCycle()
{
if (myRegion->code == meshtastic_Config_LoRaConfig_RegionCode_EU_866) {
if (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ||
config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER_LATE) {
return 10.0f;
} else {
return 2.5f;
}
}
// For all other regions, return the standard duty cycle
return myRegion->dutyCycle;
}
/**
* ## LoRaWAN for North America
@@ -518,6 +542,11 @@ void RadioInterface::applyModemConfig()
cr = 8;
sf = 12;
break;
case meshtastic_Config_LoRaConfig_ModemPreset_LITE_FAST:
bw = 125;
cr = 5;
sf = 9;
break;
}
} else {
sf = loraConfig.spread_factor;
@@ -551,6 +580,19 @@ void RadioInterface::applyModemConfig()
// Set to default modem preset
loraConfig.use_preset = true;
loraConfig.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
} else if (myRegion->code == meshtastic_Config_LoRaConfig_RegionCode_EU_866 && bw != 125) {
static const char *err_string = "EU_866 requires 125kHz bandwidth. Fall back to LiteFast preset";
LOG_ERROR(err_string);
RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
cn->level = meshtastic_LogRecord_Level_ERROR;
sprintf(cn->message, err_string);
service->sendClientNotification(cn);
// Set to LiteFast preset which is compliant
loraConfig.use_preset = true;
loraConfig.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LITE_FAST;
} else {
validConfig = true;
}
@@ -569,8 +611,9 @@ void RadioInterface::applyModemConfig()
// Set final tx_power back onto config
loraConfig.tx_power = (int8_t)power; // cppcheck-suppress assignmentAddressToInteger
// Calculate the number of channels
uint32_t numChannels = floor((myRegion->freqEnd - myRegion->freqStart) / (myRegion->spacing + (bw / 1000)));
// Calculate number of channels: spacing = gap between channels (0 for continuous spectrum)
float channelSpacing = myRegion->spacing + (bw / 1000);
uint32_t numChannels = round((myRegion->freqEnd - myRegion->freqStart + myRegion->spacing) / channelSpacing);
// If user has manually specified a channel num, then use that, otherwise generate one by hashing the name
const char *channelName = channels.getName(channels.getPrimaryIndex());
@@ -582,11 +625,8 @@ void RadioInterface::applyModemConfig()
channel_num ==
hash(DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset)) % numChannels;
// Old frequency selection formula
// float freq = myRegion->freqStart + ((((myRegion->freqEnd - myRegion->freqStart) / numChannels) / 2) * channel_num);
// New frequency selection formula
float freq = myRegion->freqStart + (bw / 2000) + (channel_num * (bw / 1000));
// Calculate frequency: freqStart is band edge, add half bandwidth to get first channel center
float freq = myRegion->freqStart + (bw / 2000) + (channel_num * channelSpacing);
// override if we have a verbatim frequency
if (loraConfig.override_frequency) {
+4 -3
View File
@@ -294,10 +294,11 @@ ErrorCode Router::send(meshtastic_MeshPacket *p)
} // should have already been handled by sendLocal
// Abort sending if we are violating the duty cycle
if (!config.lora.override_duty_cycle && myRegion->dutyCycle < 100) {
float effectiveDutyCycle = getEffectiveDutyCycle();
if (!config.lora.override_duty_cycle && effectiveDutyCycle < 100) {
float hourlyTxPercent = airTime->utilizationTXPercent();
if (hourlyTxPercent > myRegion->dutyCycle) {
uint8_t silentMinutes = airTime->getSilentMinutes(hourlyTxPercent, myRegion->dutyCycle);
if (hourlyTxPercent > effectiveDutyCycle) {
uint8_t silentMinutes = airTime->getSilentMinutes(hourlyTxPercent, effectiveDutyCycle);
LOG_WARN("Duty cycle limit exceeded. Aborting send for now, you can send again in %d mins", silentMinutes);
+31 -2
View File
@@ -334,6 +334,23 @@ bool initWifi()
}
#ifdef ARCH_ESP32
#if ESP_ARDUINO_VERSION <= ESP_ARDUINO_VERSION_VAL(3, 0, 0)
// Most of the next 12 lines of code are adapted from espressif/arduino-esp32
// Licensed under the GNU Lesser General Public License v2.1
// https://github.com/espressif/arduino-esp32/blob/1f038677eb2eaf5e9ca6b6074486803c15468bed/libraries/WiFi/src/WiFiSTA.cpp#L755
esp_netif_t *get_esp_interface_netif(esp_interface_t interface);
IPv6Address GlobalIPv6()
{
esp_ip6_addr_t addr;
if (WiFiGenericClass::getMode() == WIFI_MODE_NULL) {
return IPv6Address();
}
if (esp_netif_get_ip6_global(get_esp_interface_netif(ESP_IF_WIFI_STA), &addr)) {
return IPv6Address();
}
return IPv6Address(addr.addr);
}
#endif
// Called by the Espressif SDK to
static void WiFiEvent(WiFiEvent_t event)
{
@@ -355,6 +372,17 @@ static void WiFiEvent(WiFiEvent_t event)
break;
case ARDUINO_EVENT_WIFI_STA_CONNECTED:
LOG_INFO("Connected to access point");
if (config.network.ipv6_enabled) {
#if ESP_ARDUINO_VERSION >= ESP_ARDUINO_VERSION_VAL(3, 0, 0)
if (!WiFi.enableIPv6()) {
LOG_WARN("Failed to enable IPv6");
}
#else
if (!WiFi.enableIpV6()) {
LOG_WARN("Failed to enable IPv6");
}
#endif
}
#ifdef WIFI_LED
digitalWrite(WIFI_LED, HIGH);
#endif
@@ -383,7 +411,8 @@ static void WiFiEvent(WiFiEvent_t event)
LOG_INFO("Obtained Local IP6 address: %s", WiFi.linkLocalIPv6().toString().c_str());
LOG_INFO("Obtained GlobalIP6 address: %s", WiFi.globalIPv6().toString().c_str());
#else
LOG_INFO("Obtained IP6 address: %s", WiFi.localIPv6().toString().c_str());
LOG_INFO("Obtained Local IP6 address: %s", WiFi.localIPv6().toString().c_str());
LOG_INFO("Obtained GlobalIP6 address: %s", GlobalIPv6().toString().c_str());
#endif
break;
case ARDUINO_EVENT_WIFI_STA_LOST_IP:
@@ -514,4 +543,4 @@ uint8_t getWifiDisconnectReason()
{
return wifiDisconnectReason;
}
#endif // HAS_WIFI
#endif // HAS_WIFI
+1 -1
View File
@@ -793,7 +793,7 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
}
config.lora.tx_enabled = true;
initRegion();
if (myRegion->dutyCycle < 100) {
if (getEffectiveDutyCycle() < 100) {
config.lora.ignore_mqtt = true; // Ignore MQTT by default if region has a duty cycle limit
}
// Compare the entire string, we are sure of the length as a topic has never been set
+52 -15
View File
@@ -34,7 +34,8 @@ void NeighborInfoModule::printNodeDBNeighbors()
}
}
/* Send our initial owner announcement 35 seconds after we start (to give network time to setup) */
/* Send our initial owner announcement 35 seconds after we start (to give
* network time to setup) */
NeighborInfoModule::NeighborInfoModule()
: ProtobufModule("neighborinfo", meshtastic_PortNum_NEIGHBORINFO_APP, &meshtastic_NeighborInfo_msg),
concurrency::OSThread("NeighborInfo")
@@ -53,8 +54,8 @@ NeighborInfoModule::NeighborInfoModule()
}
/*
Collect neighbor info from the nodeDB's history, capping at a maximum number of entries and max time
Assumes that the neighborInfo packet has been allocated
Collect neighbor info from the nodeDB's history, capping at a maximum number of
entries and max time Assumes that the neighborInfo packet has been allocated
@returns the number of entries collected
*/
uint32_t NeighborInfoModule::collectNeighborInfo(meshtastic_NeighborInfo *neighborInfo)
@@ -71,8 +72,8 @@ uint32_t NeighborInfoModule::collectNeighborInfo(meshtastic_NeighborInfo *neighb
if ((neighborInfo->neighbors_count < MAX_NUM_NEIGHBORS) && (nbr.node_id != my_node_id)) {
neighborInfo->neighbors[neighborInfo->neighbors_count].node_id = nbr.node_id;
neighborInfo->neighbors[neighborInfo->neighbors_count].snr = nbr.snr;
// Note: we don't set the last_rx_time and node_broadcast_intervals_secs here, because we don't want to send this over
// the mesh
// Note: we don't set the last_rx_time and node_broadcast_intervals_secs
// here, because we don't want to send this over the mesh
neighborInfo->neighbors_count++;
}
}
@@ -88,8 +89,9 @@ void NeighborInfoModule::cleanUpNeighbors()
uint32_t now = getTime();
NodeNum my_node_id = nodeDB->getNodeNum();
for (auto it = neighbors.rbegin(); it != neighbors.rend();) {
// We will remove a neighbor if we haven't heard from them in twice the broadcast interval
// cannot use isWithinTimespanMs() as it->last_rx_time is seconds since 1970
// We will remove a neighbor if we haven't heard from them in twice the
// broadcast interval cannot use isWithinTimespanMs() as it->last_rx_time is
// seconds since 1970
if ((now - it->last_rx_time > it->node_broadcast_interval_secs * 2) && (it->node_id != my_node_id)) {
LOG_DEBUG("Remove neighbor with node ID 0x%x", it->node_id);
it = std::vector<meshtastic_Neighbor>::reverse_iterator(
@@ -132,25 +134,55 @@ int32_t NeighborInfoModule::runOnce()
return Default::getConfiguredOrDefaultMs(moduleConfig.neighbor_info.update_interval, default_neighbor_info_broadcast_secs);
}
meshtastic_MeshPacket *NeighborInfoModule::allocReply()
{
LOG_INFO("NeighborInfoRequested.");
if (lastSentReply && Throttle::isWithinTimespanMs(lastSentReply, 3 * 60 * 1000)) {
LOG_DEBUG("Skip Neighbors reply since we sent a reply <3min ago");
ignoreRequest = true; // Mark it as ignored for MeshModule
return nullptr;
}
meshtastic_NeighborInfo neighborInfo = meshtastic_NeighborInfo_init_zero;
collectNeighborInfo(&neighborInfo);
meshtastic_MeshPacket *reply = allocDataProtobuf(neighborInfo);
if (reply) {
lastSentReply = millis(); // Track when we sent this reply
}
return reply;
}
/*
Collect a received neighbor info packet from another node
Pass it to an upper client; do not persist this data on the mesh
*/
bool NeighborInfoModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_NeighborInfo *np)
{
LOG_DEBUG("NeighborInfo: handleReceivedProtobuf");
if (np) {
printNeighborInfo("RECEIVED", np);
updateNeighbors(mp, np);
// Ignore dummy/interceptable packets: single neighbor with nodeId 0 and snr 0
if (np->neighbors_count != 1 || np->neighbors[0].node_id != 0 || np->neighbors[0].snr != 0.0f) {
LOG_DEBUG(" Updating neighbours");
updateNeighbors(mp, np);
} else {
LOG_DEBUG(" Ignoring dummy neighbor info packet (single neighbor with nodeId 0, snr 0)");
}
} else if (mp.hop_start != 0 && mp.hop_start == mp.hop_limit) {
LOG_DEBUG("Get or create neighbor: %u with snr %f", mp.from, mp.rx_snr);
// If the hopLimit is the same as hopStart, then it is a neighbor
getOrCreateNeighbor(mp.from, mp.from, 0, mp.rx_snr); // Set the broadcast interval to 0, as we don't know it
getOrCreateNeighbor(mp.from, mp.from, 0,
mp.rx_snr); // Set the broadcast interval to 0, as we don't know it
}
// Allow others to handle this packet
return false;
}
/*
Copy the content of a current NeighborInfo packet into a new one and update the last_sent_by_id to our NodeNum
Copy the content of a current NeighborInfo packet into a new one and update the
last_sent_by_id to our NodeNum
*/
void NeighborInfoModule::alterReceivedProtobuf(meshtastic_MeshPacket &p, meshtastic_NeighborInfo *n)
{
@@ -168,8 +200,10 @@ void NeighborInfoModule::resetNeighbors()
void NeighborInfoModule::updateNeighbors(const meshtastic_MeshPacket &mp, const meshtastic_NeighborInfo *np)
{
// The last sent ID will be 0 if the packet is from the phone, which we don't count as
// an edge. So we assume that if it's zero, then this packet is from our node.
LOG_DEBUG("updateNeighbors");
// The last sent ID will be 0 if the packet is from the phone, which we don't
// count as an edge. So we assume that if it's zero, then this packet is from
// our node.
if (mp.which_payload_variant == meshtastic_MeshPacket_decoded_tag && mp.from) {
getOrCreateNeighbor(mp.from, np->last_sent_by_id, np->node_broadcast_interval_secs, mp.rx_snr);
}
@@ -188,7 +222,8 @@ meshtastic_Neighbor *NeighborInfoModule::getOrCreateNeighbor(NodeNum originalSen
// if found, update it
neighbors[i].snr = snr;
neighbors[i].last_rx_time = getTime();
// Only if this is the original sender, the broadcast interval corresponds to it
// Only if this is the original sender, the broadcast interval corresponds
// to it
if (originalSender == n && node_broadcast_interval_secs != 0)
neighbors[i].node_broadcast_interval_secs = node_broadcast_interval_secs;
return &neighbors[i];
@@ -200,10 +235,12 @@ meshtastic_Neighbor *NeighborInfoModule::getOrCreateNeighbor(NodeNum originalSen
new_nbr.node_id = n;
new_nbr.snr = snr;
new_nbr.last_rx_time = getTime();
// Only if this is the original sender, the broadcast interval corresponds to it
// Only if this is the original sender, the broadcast interval corresponds to
// it
if (originalSender == n && node_broadcast_interval_secs != 0)
new_nbr.node_broadcast_interval_secs = node_broadcast_interval_secs;
else // Assume the same broadcast interval as us for the neighbor if we don't know it
else // Assume the same broadcast interval as us for the neighbor if we don't
// know it
new_nbr.node_broadcast_interval_secs = moduleConfig.neighbor_info.update_interval;
if (neighbors.size() < MAX_NUM_NEIGHBORS) {
+7
View File
@@ -28,6 +28,10 @@ class NeighborInfoModule : public ProtobufModule<meshtastic_NeighborInfo>, priva
*/
virtual bool handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_NeighborInfo *nb) override;
/* Messages can be received that have the want_response bit set. If set, this callback will be invoked
* so that subclasses can (optionally) send a response back to the original sender. */
virtual meshtastic_MeshPacket *allocReply() override;
/*
* Collect neighbor info from the nodeDB's history, capping at a maximum number of entries and max time
* @return the number of entries collected
@@ -66,5 +70,8 @@ class NeighborInfoModule : public ProtobufModule<meshtastic_NeighborInfo>, priva
/* These are for debugging only */
void printNeighborInfo(const char *header, const meshtastic_NeighborInfo *np);
void printNodeDBNeighbors();
private:
uint32_t lastSentReply = 0; // Last time we sent a position reply (used for reply throttling only)
};
extern NeighborInfoModule *neighborInfoModule;
+2
View File
@@ -85,8 +85,10 @@ int SystemCommandsModule::handleInputEvent(const InputEvent *event)
switch (event->inputEvent) {
// GPS
case INPUT_BROKER_GPS_TOGGLE:
LOG_WARN("GPS Toggle");
#if !MESHTASTIC_EXCLUDE_GPS
if (gps) {
LOG_WARN("GPS Toggle2");
if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED &&
config.position.fixed_position == false) {
nodeDB->clearLocalPosition();
@@ -134,6 +134,10 @@ extern void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const c
#include "Sensor/TSL2561Sensor.h"
#endif
#if __has_include(<BH1750_WE.h>)
#include "Sensor/BH1750Sensor.h"
#endif
#define FAILED_STATE_SENSOR_READ_MULTIPLIER 10
#define DISPLAY_RECEIVEID_MEASUREMENTS_ON_SCREEN true
@@ -262,6 +266,9 @@ void EnvironmentTelemetryModule::i2cScanFinished(ScanI2C *i2cScanner)
#if __has_include(<SparkFun_Qwiic_Scale_NAU7802_Arduino_Library.h>)
addSensor<NAU7802Sensor>(i2cScanner, ScanI2C::DeviceType::NAU7802);
#endif
#if __has_include(<BH1750_WE.h>)
addSensor<BH1750Sensor>(i2cScanner, ScanI2C::DeviceType::BH1750);
#endif
#endif
}
@@ -0,0 +1,54 @@
#include "configuration.h"
#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<BH1750_WE.h>)
#include "../mesh/generated/meshtastic/telemetry.pb.h"
#include "BH1750Sensor.h"
#include "TelemetrySensor.h"
#include <BH1750_WE.h>
#ifndef BH1750_SENSOR_MODE
#define BH1750_SENSOR_MODE BH1750Mode::CHM
#endif
BH1750Sensor::BH1750Sensor() : TelemetrySensor(meshtastic_TelemetrySensorType_BH1750, "BH1750") {}
bool BH1750Sensor::initDevice(TwoWire *bus, ScanI2C::FoundDevice *dev)
{
LOG_INFO("Init sensor: %s with mode %d", sensorName, BH1750_SENSOR_MODE);
bh1750 = BH1750_WE(bus, dev->address.address);
status = bh1750.init();
if (!status) {
return status;
}
bh1750.setMode(BH1750_SENSOR_MODE);
initI2CSensor();
return status;
}
bool BH1750Sensor::getMetrics(meshtastic_Telemetry *measurement)
{
/* An OTH and OTH_2 measurement takes ~120 ms. I suggest to wait
140 ms to be on the safe side.
An OTL measurement takes about 16 ms. I suggest to wait 20 ms
to be on the safe side. */
if (BH1750_SENSOR_MODE == BH1750Mode::OTH || BH1750_SENSOR_MODE == BH1750Mode::OTH_2) {
bh1750.setMode(BH1750_SENSOR_MODE);
delay(140); // wait for measurement to be completed
} else if (BH1750_SENSOR_MODE == BH1750Mode::OTL) {
bh1750.setMode(BH1750_SENSOR_MODE);
delay(20);
}
measurement->variant.environment_metrics.has_lux = true;
float lightIntensity = bh1750.getLux();
measurement->variant.environment_metrics.lux = lightIntensity;
return true;
}
#endif
@@ -0,0 +1,21 @@
#pragma once
#include "configuration.h"
#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<BH1750_WE.h>)
#include "../mesh/generated/meshtastic/telemetry.pb.h"
#include "TelemetrySensor.h"
#include <BH1750_WE.h>
class BH1750Sensor : public TelemetrySensor
{
private:
BH1750_WE bh1750;
public:
BH1750Sensor();
virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
virtual bool initDevice(TwoWire *bus, ScanI2C::FoundDevice *dev) override;
};
#endif
+82 -132
View File
@@ -11,113 +11,6 @@ extern graphics::Screen *screen;
TraceRouteModule *traceRouteModule;
void TraceRouteModule::setResultText(const String &text)
{
resultText = text;
resultLines.clear();
resultLinesDirty = true;
}
void TraceRouteModule::clearResultLines()
{
resultLines.clear();
resultLinesDirty = false;
}
#if HAS_SCREEN
void TraceRouteModule::rebuildResultLines(OLEDDisplay *display)
{
if (!display) {
resultLinesDirty = false;
return;
}
resultLines.clear();
if (resultText.length() == 0) {
resultLinesDirty = false;
return;
}
int maxWidth = display->getWidth() - 4;
if (maxWidth <= 0) {
resultLinesDirty = false;
return;
}
int start = 0;
int textLength = resultText.length();
while (start <= textLength) {
int newlinePos = resultText.indexOf('\n', start);
String segment;
if (newlinePos != -1) {
segment = resultText.substring(start, newlinePos);
start = newlinePos + 1;
} else {
segment = resultText.substring(start);
start = textLength + 1;
}
if (segment.length() == 0) {
resultLines.push_back("");
continue;
}
if (display->getStringWidth(segment) <= maxWidth) {
resultLines.push_back(segment);
continue;
}
String remaining = segment;
while (remaining.length() > 0) {
String tempLine = "";
int lastGoodBreak = -1;
bool lineComplete = false;
for (int i = 0; i < static_cast<int>(remaining.length()); i++) {
char ch = remaining.charAt(i);
String testLine = tempLine + ch;
if (display->getStringWidth(testLine) > maxWidth) {
if (lastGoodBreak >= 0) {
resultLines.push_back(remaining.substring(0, lastGoodBreak + 1));
remaining = remaining.substring(lastGoodBreak + 1);
lineComplete = true;
break;
} else if (tempLine.length() > 0) {
resultLines.push_back(tempLine);
remaining = remaining.substring(i);
lineComplete = true;
break;
} else {
resultLines.push_back(String(ch));
remaining = remaining.substring(i + 1);
lineComplete = true;
break;
}
} else {
tempLine = testLine;
if (ch == ' ' || ch == '>' || ch == '<' || ch == '-' || ch == '(' || ch == ')' || ch == ',') {
lastGoodBreak = i;
}
}
}
if (!lineComplete) {
if (tempLine.length() > 0) {
resultLines.push_back(tempLine);
}
break;
}
}
}
resultLinesDirty = false;
}
#endif
bool TraceRouteModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_RouteDiscovery *r)
{
// We only alter the packet in alterReceivedProtobuf()
@@ -513,7 +406,7 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
if (node == 0 || node == NODENUM_BROADCAST) {
LOG_ERROR("Invalid node number for trace route: 0x%08x", node);
runState = TRACEROUTE_STATE_RESULT;
setResultText("Invalid node");
resultText = "Invalid node";
resultShowTime = millis();
tracingNode = 0;
@@ -527,7 +420,7 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
if (node == nodeDB->getNodeNum()) {
LOG_ERROR("Cannot trace route to self: 0x%08x", node);
runState = TRACEROUTE_STATE_RESULT;
setResultText("Cannot trace self");
resultText = "Cannot trace self";
resultShowTime = millis();
tracingNode = 0;
@@ -554,8 +447,6 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
unsigned long wait = (cooldownMs - (now - lastTraceRouteTime)) / 1000;
bannerText = String("Wait for ") + String(wait) + String("s");
runState = TRACEROUTE_STATE_COOLDOWN;
resultText = "";
clearResultLines();
requestFocus();
UIFrameEvent e;
@@ -568,8 +459,6 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
tracingNode = node;
lastTraceRouteTime = now;
runState = TRACEROUTE_STATE_TRACKING;
resultText = "";
clearResultLines();
bannerText = String("Tracing ") + getNodeName(node);
LOG_INFO("TraceRoute UI: Starting trace route to node 0x%08x, requesting focus", node);
@@ -612,7 +501,7 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
} else {
LOG_ERROR("MeshService is NULL!");
runState = TRACEROUTE_STATE_RESULT;
setResultText("Service unavailable");
resultText = "Service unavailable";
resultShowTime = millis();
tracingNode = 0;
@@ -625,7 +514,7 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
} else {
LOG_ERROR("Failed to allocate TraceRoute packet from router");
runState = TRACEROUTE_STATE_RESULT;
setResultText("Failed to send");
resultText = "Failed to send";
resultShowTime = millis();
tracingNode = 0;
@@ -643,7 +532,7 @@ void TraceRouteModule::launch(NodeNum node)
if (node == 0 || node == NODENUM_BROADCAST) {
LOG_ERROR("Invalid node number for trace route: 0x%08x", node);
runState = TRACEROUTE_STATE_RESULT;
setResultText("Invalid node");
resultText = "Invalid node";
resultShowTime = millis();
tracingNode = 0;
@@ -657,7 +546,7 @@ void TraceRouteModule::launch(NodeNum node)
if (node == nodeDB->getNodeNum()) {
LOG_ERROR("Cannot trace route to self: 0x%08x", node);
runState = TRACEROUTE_STATE_RESULT;
setResultText("Cannot trace self");
resultText = "Cannot trace self";
resultShowTime = millis();
tracingNode = 0;
@@ -679,8 +568,6 @@ void TraceRouteModule::launch(NodeNum node)
unsigned long wait = (cooldownMs - (now - lastTraceRouteTime)) / 1000;
bannerText = String("Wait for ") + String(wait) + String("s");
runState = TRACEROUTE_STATE_COOLDOWN;
resultText = "";
clearResultLines();
requestFocus();
UIFrameEvent e;
@@ -693,8 +580,6 @@ void TraceRouteModule::launch(NodeNum node)
runState = TRACEROUTE_STATE_TRACKING;
tracingNode = node;
lastTraceRouteTime = now;
resultText = "";
clearResultLines();
bannerText = String("Tracing ") + getNodeName(node);
requestFocus();
@@ -729,14 +614,14 @@ void TraceRouteModule::launch(NodeNum node)
} else {
LOG_ERROR("MeshService is NULL!");
runState = TRACEROUTE_STATE_RESULT;
setResultText("Service unavailable");
resultText = "Service unavailable";
resultShowTime = millis();
tracingNode = 0;
}
} else {
LOG_ERROR("Failed to allocate TraceRoute packet from router");
runState = TRACEROUTE_STATE_RESULT;
setResultText("Failed to send");
resultText = "Failed to send";
resultShowTime = millis();
tracingNode = 0;
}
@@ -744,7 +629,7 @@ void TraceRouteModule::launch(NodeNum node)
void TraceRouteModule::handleTraceRouteResult(const String &result)
{
setResultText(result);
resultText = result;
runState = TRACEROUTE_STATE_RESULT;
resultShowTime = millis();
tracingNode = 0;
@@ -794,15 +679,83 @@ void TraceRouteModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state
display->setFont(FONT_SMALL);
if (resultText.length() > 0) {
if (resultLinesDirty) {
rebuildResultLines(display);
std::vector<String> lines;
String currentLine = "";
int maxWidth = display->getWidth() - 4;
int start = 0;
int newlinePos = resultText.indexOf('\n', start);
while (newlinePos != -1 || start < static_cast<int>(resultText.length())) {
String segment;
if (newlinePos != -1) {
segment = resultText.substring(start, newlinePos);
start = newlinePos + 1;
newlinePos = resultText.indexOf('\n', start);
} else {
segment = resultText.substring(start);
start = resultText.length();
}
if (display->getStringWidth(segment) <= maxWidth) {
lines.push_back(segment);
} else {
// Try to break at better positions (space, >, <, -)
String remaining = segment;
while (remaining.length() > 0) {
String tempLine = "";
int lastGoodBreak = -1;
bool lineComplete = false;
for (int i = 0; i < static_cast<int>(remaining.length()); i++) {
char ch = remaining.charAt(i);
String testLine = tempLine + ch;
if (display->getStringWidth(testLine) > maxWidth) {
if (lastGoodBreak >= 0) {
// Break at the last good position
lines.push_back(remaining.substring(0, lastGoodBreak + 1));
remaining = remaining.substring(lastGoodBreak + 1);
lineComplete = true;
break;
} else if (tempLine.length() > 0) {
lines.push_back(tempLine);
remaining = remaining.substring(i);
lineComplete = true;
break;
} else {
// Single character exceeds width
lines.push_back(String(ch));
remaining = remaining.substring(i + 1);
lineComplete = true;
break;
}
} else {
tempLine = testLine;
// Mark good break positions
if (ch == ' ' || ch == '>' || ch == '<' || ch == '-' || ch == '(' || ch == ')') {
lastGoodBreak = i;
}
}
}
if (!lineComplete) {
// Reached end of remaining text
if (tempLine.length() > 0) {
lines.push_back(tempLine);
}
break;
}
}
}
}
int lineHeight = FONT_HEIGHT_SMALL + 1; // Use proper font height with 1px spacing
for (size_t i = 0; i < resultLines.size(); i++) {
for (size_t i = 0; i < lines.size(); i++) {
int lineY = contentStartY + (i * lineHeight);
if (lineY + FONT_HEIGHT_SMALL <= display->getHeight()) {
display->drawString(x + 2, lineY, resultLines[i]);
display->drawString(x + 2, lineY, lines[i]);
}
}
}
@@ -826,7 +779,7 @@ int32_t TraceRouteModule::runOnce()
if (runState == TRACEROUTE_STATE_TRACKING && now - lastTraceRouteTime > trackingTimeoutMs) {
LOG_INFO("TraceRoute timeout, no response received");
runState = TRACEROUTE_STATE_RESULT;
setResultText("No response received");
resultText = "No response received";
resultShowTime = now;
tracingNode = 0;
@@ -862,8 +815,6 @@ int32_t TraceRouteModule::runOnce()
// Cooldown finished
LOG_INFO("TraceRoute cooldown finished, returning to IDLE");
runState = TRACEROUTE_STATE_IDLE;
resultText = "";
clearResultLines();
bannerText = "";
UIFrameEvent e;
e.action = UIFrameEvent::Action::REGENERATE_FRAMESET;
@@ -877,7 +828,6 @@ int32_t TraceRouteModule::runOnce()
LOG_INFO("TraceRoute result display timeout, returning to IDLE");
runState = TRACEROUTE_STATE_IDLE;
resultText = "";
clearResultLines();
bannerText = "";
tracingNode = 0;
UIFrameEvent e;
-8
View File
@@ -7,7 +7,6 @@
#if HAS_SCREEN
#include "OLEDDisplayUi.h"
#endif
#include <vector>
#define ROUTE_SIZE sizeof(((meshtastic_RouteDiscovery *)0)->route) / sizeof(((meshtastic_RouteDiscovery *)0)->route[0])
@@ -50,11 +49,6 @@ class TraceRouteModule : public ProtobufModule<meshtastic_RouteDiscovery>,
virtual int32_t runOnce() override;
private:
void setResultText(const String &text);
void clearResultLines();
#if HAS_SCREEN
void rebuildResultLines(OLEDDisplay *display);
#endif
// Call to add unknown hops (e.g. when a node couldn't decrypt it) to the route based on hopStart and current hopLimit
void insertUnknownHops(meshtastic_MeshPacket &p, meshtastic_RouteDiscovery *r, bool isTowardsDestination);
@@ -80,8 +74,6 @@ class TraceRouteModule : public ProtobufModule<meshtastic_RouteDiscovery>,
unsigned long trackingTimeoutMs = 10000;
String bannerText;
String resultText;
std::vector<String> resultLines;
bool resultLinesDirty = false;
NodeNum tracingNode = 0;
bool initialized = false;
};
+1 -2
View File
@@ -116,7 +116,6 @@ void BMX160Sensor::calibrate(uint16_t forSeconds)
{
#if !defined(MESHTASTIC_EXCLUDE_SCREEN)
LOG_DEBUG("BMX160 calibration started for %is", forSeconds);
highestX = 0, lowestX = 0, highestY = 0, lowestY = 0, highestZ = 0, lowestZ = 0;
doCalibration = true;
uint16_t calibrateFor = forSeconds * 1000; // calibrate for seconds provided
@@ -128,4 +127,4 @@ void BMX160Sensor::calibrate(uint16_t forSeconds)
#endif
#endif
#endif
+1 -2
View File
@@ -157,7 +157,6 @@ void ICM20948Sensor::calibrate(uint16_t forSeconds)
{
#if !defined(MESHTASTIC_EXCLUDE_SCREEN) && HAS_SCREEN
LOG_DEBUG("BMX160 calibration started for %is", forSeconds);
highestX = 0, lowestX = 0, highestY = 0, lowestY = 0, highestZ = 0, lowestZ = 0;
doCalibration = true;
uint16_t calibrateFor = forSeconds * 1000; // calibrate for seconds provided
@@ -296,4 +295,4 @@ bool ICM20948Singleton::setWakeOnMotion()
return true;
}
#endif
#endif
+2 -3
View File
@@ -69,8 +69,7 @@ void MotionSensor::wakeScreen()
{
if (powerFSM.getState() == &stateDARK) {
LOG_DEBUG("Motion wakeScreen detected");
if (config.display.wake_on_tap_or_motion)
powerFSM.trigger(EVENT_INPUT);
powerFSM.trigger(EVENT_INPUT);
}
}
@@ -88,4 +87,4 @@ void MotionSensor::buttonPress() {}
#endif
#endif
#endif
-3
View File
@@ -695,9 +695,6 @@ void MQTT::publishQueuedMessages()
if (mqttQueue.isEmpty() || !isConnected)
return;
if (!moduleConfig.mqtt.proxy_to_client_enabled && !isConnected)
return;
LOG_DEBUG("Publish enqueued MQTT message");
const std::unique_ptr<QueueEntry> entry(mqttQueue.dequeuePtr(0));
LOG_INFO("publish %s, %u bytes from queue", entry->topic.c_str(), entry->envBytes.size());
+10 -30
View File
@@ -20,14 +20,13 @@
#include "PowerStatus.h"
#endif
#if defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C6)
#if defined(CONFIG_NIMBLE_CPP_IDF)
#include "host/ble_gap.h"
#else
#include "nimble/nimble/host/include/host/ble_gap.h"
#endif
#if defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C6)
namespace
{
constexpr uint16_t kPreferredBleMtu = 517;
@@ -777,35 +776,16 @@ bool NimbleBluetooth::isConnected()
int NimbleBluetooth::getRssi()
{
#if defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C6)
if (!bleServer || !isConnected()) {
return 0; // No active BLE connection
}
uint16_t connHandle = nimbleBluetoothConnHandle.load();
if (connHandle == BLE_HS_CONN_HANDLE_NONE) {
const auto peers = bleServer->getPeerDevices();
if (!peers.empty()) {
connHandle = peers.front();
nimbleBluetoothConnHandle = connHandle;
}
}
if (connHandle == BLE_HS_CONN_HANDLE_NONE) {
return 0; // Connection handle not available yet
}
int8_t rssi = 0;
const int rc = ble_gap_conn_rssi(connHandle, &rssi);
if (rc == 0) {
return rssi;
}
LOG_DEBUG("BLE RSSI read failed, rc=%d", rc);
if (bleServer && isConnected()) {
auto service = bleServer->getServiceByUUID(MESH_SERVICE_UUID);
uint16_t handle = service->getHandle();
#ifdef NIMBLE_TWO
return NimBLEDevice::getClientByHandle(handle)->getRssi();
#else
return NimBLEDevice::getClientByID(handle)->getRssi();
#endif
return 0;
}
return 0; // FIXME figure out where to source this
}
void NimbleBluetooth::setup()
+21 -1
View File
@@ -14,6 +14,9 @@
#include "error.h"
#include "main.h"
#include "meshUtils.h"
#include "power.h"
#include <hal/nrf_lpcomp.h>
#ifdef BQ25703A_ADDR
#include "BQ25713.h"
@@ -389,6 +392,23 @@ void cpuDeepSleep(uint32_t msecToWake)
nrf_gpio_cfg_sense_set(BUTTON_PIN, sense); // Apply SENSE to wake up the device from the deep sleep
#endif
#ifdef BATTERY_LPCOMP_INPUT
// Wake up if power rises again
nrf_lpcomp_config_t c;
c.reference = BATTERY_LPCOMP_THRESHOLD;
c.detection = NRF_LPCOMP_DETECT_UP;
c.hyst = NRF_LPCOMP_HYST_NOHYST;
nrf_lpcomp_configure(NRF_LPCOMP, &c);
nrf_lpcomp_input_select(NRF_LPCOMP, BATTERY_LPCOMP_INPUT);
nrf_lpcomp_enable(NRF_LPCOMP);
battery_adcEnable();
nrf_lpcomp_task_trigger(NRF_LPCOMP, NRF_LPCOMP_TASK_START);
while (!nrf_lpcomp_event_check(NRF_LPCOMP, NRF_LPCOMP_EVENT_READY))
;
#endif
auto ok = sd_power_system_off();
if (ok != NRF_SUCCESS) {
LOG_ERROR("FIXME: Ignoring soft device (EasyDMA pending?) and forcing system-off!");
@@ -420,4 +440,4 @@ void enterDfuMode()
#else
enterUf2Dfu();
#endif
}
}
+59 -6
View File
@@ -37,6 +37,8 @@ bool yamlOnly = false;
const char *argp_program_version = optstr(APP_VERSION);
char stdoutBuffer[512];
// FIXME - move setBluetoothEnable into a HALPlatform class
void setBluetoothEnable(bool enable)
{
@@ -144,6 +146,20 @@ void getMacAddr(uint8_t *dmac)
}
}
std::string cleanupNameForAutoconf(std::string name)
{
// Convert spaces -> dashes, lowercase
std::transform(name.begin(), name.end(), name.begin(), [](unsigned char c) {
if (c == ' ') {
return '-';
}
return (char)std::tolower(c);
});
return name;
}
/** apps run under portduino can optionally define a portduinoSetup() to
* use portduino specific init code (such as gpioBind) to setup portduino on their host machine,
* before running 'arduino' code.
@@ -154,6 +170,9 @@ void portduinoSetup()
std::string gpioChipName = "gpiochip";
portduino_config.displayPanel = no_screen;
// Force stdout to be line buffered
setvbuf(stdout, stdoutBuffer, _IOLBF, sizeof(stdoutBuffer));
if (portduino_config.force_simradio == true) {
portduino_config.lora_module = use_simradio;
} else if (configPath != nullptr) {
@@ -213,6 +232,11 @@ void portduinoSetup()
// If LoRa `Module: auto` (default in config.yaml),
// attempt to auto config based on Product Strings
if (portduino_config.lora_module == use_autoconf) {
bool found_hat = false;
bool found_rak_eeprom = false;
bool found_ch341 = false;
char hat_vendor[96] = {0};
char autoconf_product[96] = {0};
// Try CH341
try {
@@ -222,21 +246,32 @@ void portduinoSetup()
ch341Hal->getProductString(autoconf_product, 95);
delete ch341Hal;
std::cout << "autoconf: Found CH341 device " << autoconf_product << std::endl;
found_ch341 = true;
} catch (...) {
std::cout << "autoconf: Could not locate CH341 device" << std::endl;
}
// Try Pi HAT+
if (strlen(autoconf_product) < 6) {
std::cout << "autoconf: Looking for Pi HAT+..." << std::endl;
if (access("/proc/device-tree/hat/vendor", R_OK) == 0) {
std::ifstream hatVendorFile("/proc/device-tree/hat/vendor");
if (hatVendorFile.is_open()) {
hatVendorFile.read(hat_vendor, 95);
hatVendorFile.close();
}
}
if (access("/proc/device-tree/hat/product", R_OK) == 0) {
std::ifstream hatProductFile("/proc/device-tree/hat/product");
if (hatProductFile.is_open()) {
hatProductFile.read(autoconf_product, 95);
hatProductFile.close();
}
std::cout << "autoconf: Found Pi HAT+ " << autoconf_product << " at /proc/device-tree/hat/product" << std::endl;
std::cout << "autoconf: Found Pi HAT+ " << hat_vendor << " " << autoconf_product << " at /proc/device-tree/hat"
<< std::endl;
found_hat = true;
} else {
std::cout << "autoconf: Could not locate Pi HAT+ at /proc/device-tree/hat/product" << std::endl;
std::cout << "autoconf: Could not locate Pi HAT+ at /proc/device-tree/hat" << std::endl;
}
}
// attempt to load autoconf data from an EEPROM on 0x50
@@ -292,6 +327,7 @@ void portduinoSetup()
autoconf_product[0] = 0x0;
} else {
std::cout << "autoconf: Found eeprom data " << autoconf_raw << std::endl;
found_rak_eeprom = true;
if (mac_start != nullptr) {
std::cout << "autoconf: Found mac data " << mac_start << std::endl;
if (strlen(mac_start) == 12)
@@ -320,12 +356,29 @@ void portduinoSetup()
if (strlen(autoconf_product) > 0) {
// From configProducts map in PortduinoGlue.h
std::string product_config = "";
try {
if (configProducts.find(autoconf_product) != configProducts.end()) {
product_config = configProducts.at(autoconf_product);
} catch (std::out_of_range &e) {
std::cerr << "autoconf: Unable to find config for " << autoconf_product << std::endl;
exit(EXIT_FAILURE);
} else {
if (found_hat) {
product_config =
cleanupNameForAutoconf("lora-hat-" + std::string(hat_vendor) + "-" + autoconf_product + ".yaml");
} else if (found_ch341) {
product_config = cleanupNameForAutoconf("lora-usb-" + std::string(autoconf_product) + ".yaml");
}
// Don't try to automatically find config for a device with RAK eeprom.
if (found_rak_eeprom) {
std::cerr << "autoconf: Found unknown RAK product " << autoconf_product << std::endl;
exit(EXIT_FAILURE);
}
if (access((portduino_config.available_directory + product_config).c_str(), R_OK) != 0) {
std::cerr << "autoconf: Unable to find config for " << autoconf_product << "(tried " << product_config << ")"
<< std::endl;
exit(EXIT_FAILURE);
}
}
if (loadConfig((portduino_config.available_directory + product_config).c_str())) {
std::cout << "autoconf: Using " << product_config << " as config file for " << autoconf_product << std::endl;
} else {
+28
View File
@@ -26,3 +26,31 @@ void getMacAddr(uint8_t *dmac)
}
void cpuDeepSleep(uint32_t msecToWake) {}
// Hacks to force more code and data out.
// By default __assert_func uses fiprintf which pulls in stdio.
extern "C" void __wrap___assert_func(const char *, int, const char *, const char *)
{
while (true)
;
return;
}
// By default strerror has a lot of strings we probably don't use. Make it return an empty string instead.
char empty = 0;
extern "C" char *__wrap_strerror(int)
{
return &empty;
}
#ifdef MESHTASTIC_EXCLUDE_TZ
struct _reent;
// Even if you don't use timezones, mktime will try to set the timezone anyway with _tzset_unlocked(), which pulls in scanf and
// friends. The timezone is initialized to UTC by default.
extern "C" void __wrap__tzset_unlocked_r(struct _reent *reent_ptr)
{
return;
}
#endif
+2
View File
@@ -144,4 +144,6 @@ class Power : private concurrency::OSThread
#endif
};
void battery_adcEnable();
extern Power *power;
+1
View File
@@ -56,5 +56,6 @@
// "USERPREFS_MQTT_ROOT_TOPIC": "event/REPLACEME",
// "USERPREFS_RINGTONE_NAG_SECS": "60",
"USERPREFS_RINGTONE_RTTTL": "24:d=32,o=5,b=565:f6,p,f6,4p,p,f6,p,f6,2p,p,b6,p,b6,p,b6,p,b6,p,b,p,b,p,b,p,b,p,b,p,b,p,b,p,b,1p.,2p.,p",
// "USERPREFS_NETWORK_IPV6_ENABLED": "1",
"USERPREFS_TZ_STRING": "tzplaceholder "
}
+11
View File
@@ -0,0 +1,11 @@
#include "RadioLib.h"
static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
static const Module::RfSwitchMode_t rfswitch_table[] = {
// mode DIO5 DIO6
{LR11x0::MODE_STBY, {LOW, LOW}}, {LR11x0::MODE_RX, {HIGH, LOW}},
{LR11x0::MODE_TX, {LOW, HIGH}}, {LR11x0::MODE_TX_HP, {LOW, HIGH}},
{LR11x0::MODE_TX_HF, {LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW}},
{LR11x0::MODE_WIFI, {LOW, LOW}}, END_OF_MODE_TABLE,
};
+15 -1
View File
@@ -15,6 +15,7 @@
// not found then probe for SX1262
#define USE_SX1262
#define USE_SX1268
#define USE_LR1121
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 5
@@ -34,6 +35,19 @@
// code)
#endif
// LR1121
#ifdef USE_LR1121
#define LR1121_IRQ_PIN 1
#define LR1121_NRESET_PIN LORA_RESET
#define LR1121_BUSY_PIN 4
#define LR1121_SPI_NSS_PIN 10
#define LR1121_SPI_SCK_PIN 12
#define LR1121_SPI_MOSI_PIN 11
#define LR1121_SPI_MISO_PIN 13
#define LR11X0_DIO3_TCXO_VOLTAGE 3.0
#define LR11X0_DIO_AS_RF_SWITCH
#endif
// Leave undefined to disable our PMU IRQ handler. DO NOT ENABLE THIS because the pmuirq can cause sperious interrupts
// and waking from light sleep
// #define PMU_IRQ 40
@@ -64,4 +78,4 @@
// has 32768 Hz crystal
#define HAS_32768HZ 1
#define USE_SH1106
#define USE_SH1106
@@ -1,16 +0,0 @@
; Elecrow ThinkNode M4 (nRF52840 + LR1110)
[env:thinknode_m4]
extends = nrf52840_base
board = ThinkNode-M4
board_check = true
debug_tool = jlink
build_flags = ${nrf52840_base.build_flags}
-Ivariants/nrf52840/ELECROW-ThinkNode-M4
-DELECROW_ThinkNode_M4
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW-ThinkNode-M4>
lib_deps =
${nrf52840_base.lib_deps}
lewisxhe/PCF8563_Library@^1.0.1
@@ -1,47 +0,0 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "variant.h"
#include "nrf.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
const uint32_t g_ADigitalPinMap[] = {
// P0 - pins 0 and 1 are hardwired for xtal and should never be enabled
0xff, 0xff, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
// P1
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
void initVariant()
{
#if (PIN_LED1 >= 0)
pinMode(PIN_LED1, OUTPUT);
ledOff(PIN_LED1);
#endif
#if (PIN_LED2 >= 0)
pinMode(PIN_LED2, OUTPUT);
ledOff(PIN_LED2);
#endif
#if (PIN_LED3 >= 0)
pinMode(PIN_LED3, OUTPUT);
ledOff(PIN_LED3);
#endif
}
@@ -1,122 +0,0 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _VARIANT_ELECROW_THINKNODE_M4_
#define _VARIANT_ELECROW_THINKNODE_M4_
/** Master clock frequency */
#define VARIANT_MCK (64000000ul)
#define USE_LFXO // Board uses 32 kHz crystal for LF domain
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "WVariant.h"
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
// Number of pins defined in PinDescription array
#define PINS_COUNT (48)
#define NUM_DIGITAL_PINS (48)
#define NUM_ANALOG_INPUTS (6)
#define NUM_ANALOG_OUTPUTS (0)
// LEDs
#define PIN_LED1 (32 + 9) // P1.09, status LED (blue)
#define PIN_LED2 -1
#define PIN_LED3 -1
#define LED_BUILTIN PIN_LED1
#define LED_STATE_ON 0 // active-low LED drive
// Buttons
#define PIN_BUTTON1 (0 + 4) // P0.04 KEY input
// USB / power detection
#define EXT_PWR_DETECT (32 + 3) // P1.03 USB present sense
// I2C bus
#define WIRE_INTERFACES_COUNT 1
#define PIN_WIRE_SDA (32 + 0) // P1.00 SDA1
#define PIN_WIRE_SCL (32 + 5) // P1.05 SCL1
// Analog pins
#define PIN_A0 (2) // P0.02
#define BATTERY_PIN PIN_A0
#define BATTERY_SENSE_SAMPLES 30
#define ADC_RESOLUTION 14
#define BATTERY_SENSE_RESOLUTION_BITS 12
#define BATTERY_SENSE_RESOLUTION 4096.0
#define ADC_MULTIPLIER (2.00F)
#undef AREF_VOLTAGE
#define AREF_VOLTAGE 3.0
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
// GPS interface (L76K)
#define HAS_GPS 1
#define GPS_L76K
#define GPS_BAUDRATE 9600
#define PIN_GPS_REINIT (0 + 3) // P0.03 GPS_RST
#define PIN_GPS_STANDBY (0 + 28) // P0.28 GPS_STANDBY
#define PIN_GPS_EN (32 + 11) // P1.11 GPS_EN
#define GPS_EN_ACTIVE HIGH
#define GPS_TX_PIN (32 + 12) // P1.12 GPS_TX -> MCU RX
#define GPS_RX_PIN (32 + 14) // P1.14 GPS_RX -> MCU TX
#define PIN_SERIAL1_RX GPS_TX_PIN
#define PIN_SERIAL1_TX GPS_RX_PIN
#define GPS_THREAD_INTERVAL 50
// LoRa (LR1110) SPI bus
#define SPI_INTERFACES_COUNT 1
#define PIN_SPI_MISO (0 + 8) // P0.08
#define PIN_SPI_MOSI (0 + 7) // P0.07
#define PIN_SPI_SCK (0 + 6) // P0.06
#define PIN_SPI_NSS (0 + 27) // P0.27
#define LORA_CS PIN_SPI_NSS
#define LORA_SCK PIN_SPI_SCK
#define LORA_MISO PIN_SPI_MISO
#define LORA_MOSI PIN_SPI_MOSI
#define LORA_RESET (32 + 8) // P1.08 LR_NRESET
#define LORA_DIO1 (0 + 24) // P0.24 LR_DIO1 / IRQ
#define LORA_DIO2 (0 + 26) // P0.26 LR_BUSY (treated as DIO2)
#define USE_LR1110
#define LR1110_IRQ_PIN LORA_DIO1
#define LR1110_NRESET_PIN LORA_RESET
#define LR1110_BUSY_PIN LORA_DIO2
#define LR1110_SPI_NSS_PIN LORA_CS
#define LR1110_SPI_SCK_PIN LORA_SCK
#define LR1110_SPI_MOSI_PIN LORA_MOSI
#define LR1110_SPI_MISO_PIN LORA_MISO
#define LR11X0_DIO3_TCXO_VOLTAGE 3.3f
#define LR11X0_DIO_AS_RF_SWITCH
// Peripheral power control
#define PIN_POWER_EN (0 + 11) // P0.11 PERIPH_EN
#ifdef __cplusplus
}
#endif
#endif // _VARIANT_ELECROW_THINKNODE_M4_
@@ -210,6 +210,16 @@ No longer populated on PCB
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
#define ADC_MULTIPLIER (4.916F)
// rf52840 AIN2 = Pin 4
#define BATTERY_LPCOMP_INPUT NRF_LPCOMP_INPUT_2
// We have AIN2 with a VBAT divider so AIN2 = VBAT * (100/490)
// We have the device going deep sleep under 3.1V, which is AIN2 = 0.63V
// So we can wake up when VBAT>=VDD is restored to 3.3V, where AIN2 = 0.67V
// Ratio 0.67/3.3 = 0.20, so we can pick a bit higher, 2/8 VDD, which means
// VBAT=4.04V
#define BATTERY_LPCOMP_THRESHOLD NRF_LPCOMP_REF_SUPPLY_2_8
#define HAS_RTC 0
#ifdef __cplusplus
}
@@ -120,7 +120,7 @@ No longer populated on PCB
#undef AREF_VOLTAGE
#define AREF_VOLTAGE 3.0
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
#define ADC_MULTIPLIER (4.90F)
#define ADC_MULTIPLIER (4.6425F)
#undef HAS_GPS
#define HAS_GPS 0
@@ -129,4 +129,4 @@ No longer populated on PCB
}
#endif
#endif
#endif
+14
View File
@@ -267,6 +267,20 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
#define ADC_MULTIPLIER 1.73
// RAK4630 AIN0 = nrf52840 AIN3 = Pin 5
#define BATTERY_LPCOMP_INPUT NRF_LPCOMP_INPUT_3
// We have AIN3 with a VBAT divider so AIN3 = VBAT * (1.5/2.5)
// We have the device going deep sleep under 3.1V, which is AIN3 = 1.86V
// So we can wake up when VBAT>=VDD is restored to 3.3V, where AIN3 = 1.98V
// 1.98/3.3 = 6/10, but that's close to the VBAT divider, so we
// pick 6/8VDD, which means VBAT=4.1V.
// Reference:
// VDD=3.3V AIN3=5/8*VDD=2.06V VBAT=1.66*AIN3=3.41V
// VDD=3.3V AIN3=11/16*VDD=2.26V VBAT=1.66*AIN3=3.76V
// VDD=3.3V AIN3=6/8*VDD=2.47V VBAT=1.66*AIN3=4.1V
#define BATTERY_LPCOMP_THRESHOLD NRF_LPCOMP_REF_SUPPLY_11_16
#define HAS_RTC 1
#define HAS_ETHERNET 1
+1 -1
View File
@@ -15,7 +15,7 @@ Do not expect a working Meshtastic device with this target.
#define USE_STM32WLx
#define LED_PIN PB5
#define LED_STATE_ON 1
#define LED_STATE_ON 0
#define WIO_E5
+1 -1
View File
@@ -1,4 +1,4 @@
[VERSION]
major = 2
minor = 7
build = 15
build = 16