Add missing hops in traceroute as "unkown" (#4056)

E.g. in case a node couldn't decrypt the packet

.github/ISSUE_TEMPLATE/feature.yml

@@ -16,6 +16,9 @@ body:
       options:
         - NRF52
         - ESP32
+        - RP2040
+        - Linux Native
+        - other
     validations:
       required: true
   - type: textarea

.github/actions/setup-base/action.yml

@@ -5,37 +5,25 @@ runs:
   using: "composite"
   steps:
     - name: Checkout code
-      uses: actions/checkout@v3
+      uses: actions/checkout@v4
       with:
         submodules: "recursive"
         ref: ${{github.event.pull_request.head.ref}}
         repository: ${{github.event.pull_request.head.repo.full_name}}
 
-    - name: Install cppcheck
+    - name: Install dependencies 
       shell: bash
       run: |
-        sudo apt-get install -y cppcheck
-
-    - name: Install libbluetooth
-      shell: bash
-      run: |
-        sudo apt-get install -y libbluetooth-dev
-    - name: Install libgpiod
-      shell: bash
-      run: |
-        sudo apt-get install -y libgpiod-dev
-    - name: Install libyaml-cpp
-      shell: bash
-      run: |
-        sudo apt-get install -y libyaml-cpp-dev
+        sudo apt-get -y update 
+        sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev
 
     - name: Setup Python
-      uses: actions/setup-python@v4
+      uses: actions/setup-python@v5
       with:
         python-version: 3.x
 
     - name: Cache python libs
-      uses: actions/cache@v3
+      uses: actions/cache@v4
       id: cache-pip # needed in if test
       with:
         path: ~/.cache/pip

.github/workflows/build_esp32.yml

@@ -11,13 +11,13 @@ jobs:
   build-esp32:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
 
       - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
           repo: meshtastic/web
           file: build.tar
@@ -41,7 +41,7 @@ jobs:
         run: bin/build-esp32.sh ${{ inputs.board }}
 
       - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
           repo: meshtastic/firmware-ota
           file: firmware.bin
@@ -54,9 +54,10 @@ jobs:
         id: version
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
           path: |
             release/*.bin
             release/*.elf

.github/workflows/build_esp32_c3.yml

@@ -13,13 +13,13 @@ jobs:
   build-esp32-c3:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
 
       - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
           repo: meshtastic/web
           file: build.tar
@@ -41,7 +41,7 @@ jobs:
         run: bin/build-esp32.sh ${{ inputs.board }}
 
       - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
           repo: meshtastic/firmware-ota
           file: firmware-c3.bin
@@ -54,9 +54,10 @@ jobs:
         id: version
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
           path: |
             release/*.bin
             release/*.elf

.github/workflows/build_esp32_s3.yml

@@ -11,13 +11,13 @@ jobs:
   build-esp32-s3:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
 
       - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
           repo: meshtastic/web
           file: build.tar
@@ -39,7 +39,7 @@ jobs:
         run: bin/build-esp32.sh ${{ inputs.board }}
 
       - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
           repo: meshtastic/firmware-ota
           file: firmware-s3.bin
@@ -52,9 +52,10 @@ jobs:
         id: version
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
           path: |
             release/*.bin
             release/*.elf

.github/workflows/build_native.yml

@@ -0,0 +1,85 @@
+name: Build Native
+
+on: workflow_call
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-native:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Install libbluetooth
+        shell: bash
+        run: |
+          sudo apt-get update
+          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U meshtastic --pre
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
+
+      - name: Build Native
+        run: bin/build-native.sh
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-native-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
+            release/meshtasticd_linux_x86_64
+            bin/config-dist.yaml
+
+      - name: Docker login
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        uses: docker/login-action@v3
+        continue-on-error: true # FIXME: Failing docker login auth
+        with:
+          username: meshtastic
+          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
+
+      - name: Docker setup
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        continue-on-error: true # FIXME: Failing docker login auth
+        uses: docker/setup-buildx-action@v3
+
+      - name: Docker build and push tagged versions
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        continue-on-error: true # FIXME: Failing docker login auth
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./Dockerfile
+          push: true
+          tags: meshtastic/device-simulator:${{ steps.version.outputs.version }}
+
+      - name: Docker build and push
+        if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        continue-on-error: true # FIXME: Failing docker login auth
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./Dockerfile
+          push: true
+          tags: meshtastic/device-simulator:latest

.github/workflows/build_nrf52.yml

@@ -11,7 +11,7 @@ jobs:
   build-nrf52:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -24,9 +24,10 @@ jobs:
         id: version
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
           path: |
             release/*.uf2
             release/*.elf

.github/workflows/build_raspbian.yml

@@ -10,8 +10,13 @@ jobs:
   build-raspbian:
     runs-on: [self-hosted, linux, ARM64]
     steps:
+      - name: Install libbluetooth
+        shell: bash
+        run: |
+          apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+
       - name: Checkout code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}
@@ -37,9 +42,10 @@ jobs:
         id: version
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-raspbian-${{ steps.version.outputs.version }}.zip
+          overwrite: true
           path: |
             release/meshtasticd_linux_aarch64
             bin/config-dist.yaml

.github/workflows/build_raspbian_armv7l.yml

@@ -0,0 +1,51 @@
+name: Build Raspbian Arm
+
+on: workflow_call
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian-armv7l:
+    runs-on: [self-hosted, linux, ARM]
+    steps:
+      - name: Install libbluetooth
+        shell: bash
+        run: |
+          apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U meshtastic --pre
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
+
+      - name: Build Raspbian
+        run: bin/build-native.sh
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-raspbian-armv7l-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
+            release/meshtasticd_linux_armv7l
+            bin/config-dist.yaml

.github/workflows/build_rpi2040.yml

@@ -11,7 +11,7 @@ jobs:
   build-rpi2040:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -24,9 +24,10 @@ jobs:
         id: version
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
           path: |
             release/*.uf2
             release/*.elf

.github/workflows/main_matrix.yml

@@ -8,7 +8,7 @@ on:
     branches: [master, develop]
     paths-ignore:
       - "**.md"
-      - "version.properties"
+      - version.properties
 
   # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
   pull_request_target:
@@ -20,208 +20,104 @@ on:
   workflow_dispatch:
 
 jobs:
-  check:
+  setup:
     strategy:
       fail-fast: false
       matrix:
-        include:
-          - board: rak11200
-          - board: tlora-v2-1-1_6
-          - board: tbeam
-          - board: heltec-v2_1
-          - board: meshtastic-diy-v1
-          - board: rak4631
-          - board: t-echo
-          - board: station-g2
-          - board: m5stack-coreink
-          - board: tbeam-s3-core
-          - board: tlora-t3s3-v1
-          - board: t-watch-s3
-          - board: t-deck
-          #- board: rak11310
+        arch: [esp32, esp32s3, esp32c3, nrf52840, rp2040, check]
+    runs-on: ubuntu-latest
+    steps:
+      - id: checkout
+        uses: actions/checkout@v4
+        name: Checkout base
+      - id: jsonStep
+        run: |
+          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
+          echo "$TARGETS"
+          echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
+    outputs:
+      esp32: ${{ steps.jsonStep.outputs.esp32 }}
+      esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
+      esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
+      nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
+      rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
+      check: ${{ steps.jsonStep.outputs.check }}
+
+  check:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.check) }}
 
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
-
-      - name: Trunk Check
-        if: ${{ github.event_name != 'workflow_dispatch' }}
-        uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b
-
       - name: Check ${{ matrix.board }}
         run: bin/check-all.sh ${{ matrix.board }}
 
   build-esp32:
+    needs: setup
     strategy:
       fail-fast: false
-      matrix:
-        include:
-          - board: rak11200
-          - board: tlora-v2
-          - board: tlora-v1
-          - board: tlora_v1_3
-          - board: tlora-v2-1-1_6
-          - board: tlora-v2-1-1_6-tcxo
-          - board: tlora-v2-1-1_8
-          - board: tbeam
-          - board: heltec-v2_0
-          - board: heltec-v2_1
-          - board: tbeam0_7
-          - board: meshtastic-diy-v1
-          - board: hydra
-          - board: meshtastic-dr-dev
-          - board: nano-g1
-          - board: station-g1
-          - board: m5stack-core
-          - board: m5stack-coreink
-          - board: nano-g1-explorer
-          - board: chatter2
+      matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
     uses: ./.github/workflows/build_esp32.yml
     with:
       board: ${{ matrix.board }}
 
   build-esp32-s3:
+    needs: setup
     strategy:
       fail-fast: false
-      matrix:
-        include:
-          - board: heltec-v3
-          - board: heltec-wsl-v3
-          - board: heltec-wireless-tracker
-          - board: heltec-wireless-tracker-V1-0
-          - board: heltec-wireless-paper-v1_0
-          - board: heltec-wireless-paper #v1.1
-          - board: tbeam-s3-core
-          - board: tlora-t3s3-v1
-          - board: t-watch-s3
-          - board: t-deck
-          - board: picomputer-s3
-          - board: station-g2
+      matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
     uses: ./.github/workflows/build_esp32_s3.yml
     with:
       board: ${{ matrix.board }}
 
   build-esp32-c3:
+    needs: setup
     strategy:
       fail-fast: false
-      matrix:
-        include:
-          - board: heltec-ht62-esp32c3-sx1262
+      matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
     uses: ./.github/workflows/build_esp32_c3.yml
     with:
       board: ${{ matrix.board }}
 
   build-nrf52:
+    needs: setup
     strategy:
       fail-fast: false
-      matrix:
-        include:
-          - board: rak4631
-          - board: rak4631_eink
-          - board: monteops_hw1
-          - board: t-echo
-          - board: canaryone
-          - board: pca10059_diy_eink
-          - board: feather_diy
-          - board: nano-g2-ultra
+      matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
     uses: ./.github/workflows/build_nrf52.yml
     with:
       board: ${{ matrix.board }}
 
   build-rpi2040:
+    needs: setup
     strategy:
       fail-fast: false
-      matrix:
-        include:
-          - board: pico
-          - board: picow
-          - board: rak11310
-          - board: senselora_rp2040
-          - board: rp2040-lora
+      matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
     uses: ./.github/workflows/build_rpi2040.yml
     with:
       board: ${{ matrix.board }}
 
-  build-raspbian:
-    strategy:
-      fail-fast: false
-      max-parallel: 1
-    uses: ./.github/workflows/build_raspbian.yml
-
   package-raspbian:
     uses: ./.github/workflows/package_raspbian.yml
 
-  build-native:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v3
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
+  package-raspbian-armv7l:
+    uses: ./.github/workflows/package_raspbian_armv7l.yml
 
-      # We now run integration test before other build steps (to quickly see runtime failures)
-      #- name: Build for native
-      #  run: platformio run -e native
-      #- name: Integration test
-      # run: |
-      #.pio/build/native/program
-      #& sleep 20 # 5 seconds was not enough
-      #echo "Simulator started, launching python test..."
-      #python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
-
-      - name: Build Native
-        run: bin/build-native.sh
-
-      - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v3
-        with:
-          name: firmware-native-${{ steps.version.outputs.version }}.zip
-          path: |
-            release/device-*.sh
-            release/device-*.bat
-
-      - name: Docker login
-        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        uses: docker/login-action@v2
-        with:
-          username: meshtastic
-          password: ${{ secrets.DOCKER_TOKEN }}
-
-      - name: Docker setup
-        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        uses: docker/setup-buildx-action@v2
-
-      - name: Docker build and push tagged versions
-        if: ${{ github.event_name == 'workflow_dispatch' }}
-        uses: docker/build-push-action@v3
-        with:
-          context: .
-          file: ./Dockerfile
-          push: true
-          tags: meshtastic/device-simulator:${{ steps.version.outputs.version }}
-
-      - name: Docker build and push
-        if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        uses: docker/build-push-action@v3
-        with:
-          context: .
-          file: ./Dockerfile
-          push: true
-          tags: meshtastic/device-simulator:latest
+  package-native:
+    uses: ./.github/workflows/package_amd64.yml
 
   after-checks:
     runs-on: ubuntu-latest
     needs: [check]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -237,21 +133,22 @@ jobs:
         build-esp32-s3,
         build-esp32-c3,
         build-nrf52,
-        build-raspbian,
-        build-native,
         build-rpi2040,
         package-raspbian,
+        package-raspbian-armv7l,
+        package-native
       ]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v3
+      - uses: actions/download-artifact@v4
         with:
           path: ./
+          merge-multiple: true
 
       - name: Display structure of downloaded files
         run: ls -R
@@ -261,25 +158,30 @@ jobs:
         id: version
 
       - name: Move files up
-        run: mv -b -t ./ ./*tbeam-2*/littlefs*.bin ./*tbeam-2*/bleota.bin ./*tbeam-s3*/bleota-s3.bin ./*esp32c3*/bleota-c3.bin ./**/firmware*.bin ./*t-echo*/Meshtastic_nRF52_factory_erase_v2.uf2 ./**/firmware-*.uf2 ./**/firmware-*-ota.zip ./**/*.elf ./*native*/*device-*.sh ./*native*/*device-*.bat ./firmware-raspbian-*/release/meshtasticd_linux_aarch64 ./firmware-raspbian-*/bin/config-dist.yaml
+        run: mv -b -t ./ ./release/meshtasticd_linux_* ./bin/config-dist.yaml ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-${{ steps.version.outputs.version }}
+          overwrite: true
           path: |
-            ./*.bin
-            ./*.uf2
+            ./firmware-*.bin
+            ./firmware-*.uf2
             ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
-            ./meshtasticd_linux_arm64
+            ./meshtasticd_linux_*
             ./config-dist.yaml
+            ./littlefs-*.bin
+            ./bleota*bin
+            ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 90
 
-      - uses: actions/download-artifact@v3
+      - uses: actions/download-artifact@v4
         with:
           name: firmware-${{ steps.version.outputs.version }}
+          merge-multiple: true
           path: ./output
 
       # For diagnostics
@@ -295,9 +197,10 @@ jobs:
         run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          overwrite: true
           path: ./*.elf
           retention-days: 30
 
@@ -319,10 +222,10 @@ jobs:
     needs: [gather-artifacts, after-checks]
     steps:
       - name: Checkout
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
 
       - name: Setup Python
-        uses: actions/setup-python@v4
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
@@ -330,14 +233,17 @@ jobs:
         run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
-      - uses: actions/download-artifact@v3
+      - uses: actions/download-artifact@v4
         with:
           name: firmware-${{ steps.version.outputs.version }}
+          merge-multiple: true
           path: ./output
 
-      - uses: actions/download-artifact@v3
+      - uses: actions/download-artifact@v4
         with:
-          name: artifact-deb
+          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
+          merge-multiple: true
+          path: ./output
 
       - name: Display structure of downloaded files
         run: ls -R
@@ -350,9 +256,10 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
 
-      - uses: actions/download-artifact@v3
+      - uses: actions/download-artifact@v4
         with:
           name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
           path: ./elfs
 
       - name: Zip Elfs
@@ -395,22 +302,42 @@ jobs:
           asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
           asset_content_type: application/zip
 
-      - name: Add raspbian .deb
+      - name: Add raspbian aarch64 .deb
         uses: actions/upload-release-asset@v1
         env:
           GITHUB_TOKEN: ${{ github.token }}
         with:
           upload_url: ${{ steps.create_release.outputs.upload_url }}
-          asset_path: ./meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
           asset_name: meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
           asset_content_type: application/vnd.debian.binary-package
 
+      - name: Add raspbian armv7l .deb
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_armhf.deb
+          asset_name: meshtasticd_${{ steps.version.outputs.version }}_armhf.deb
+          asset_content_type: application/vnd.debian.binary-package
+
+      - name: Add raspbian amd64 .deb
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
+          asset_name: meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
+          asset_content_type: application/vnd.debian.binary-package
+
       - name: Bump version.properties
         run: >-
           bin/bump_version.py
 
       - name: Create version.properties pull request
-        uses: peter-evans/create-pull-request@v3
+        uses: peter-evans/create-pull-request@v6
         with:
           add-paths: |
             version.properties

.github/workflows/nightly.yml

@@ -11,7 +11,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b

.github/workflows/package_amd64.yml

@@ -0,0 +1,78 @@
+name: Package Native
+
+on:
+  workflow_call:
+  workflow_dispatch:
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-native:
+    uses: ./.github/workflows/build_native.yml
+
+  package-native:
+    runs-on: ubuntu-latest
+    needs: build-native
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Download artifacts
+        uses: actions/download-artifact@v4
+        with:
+          name: firmware-native-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: build .debpkg
+        run: |
+          mkdir -p .debpkg/DEBIAN
+          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
+          mkdir -p .debpkg/usr/sbin
+          mkdir -p .debpkg/etc/meshtasticd
+          mkdir -p .debpkg/usr/lib/systemd/system/
+          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
+          cp release/meshtasticd_linux_x86_64 .debpkg/usr/sbin/meshtasticd
+          cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
+          chmod +x .debpkg/usr/sbin/meshtasticd
+          cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
+          echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
+          chmod +x .debpkg/DEBIAN/conffiles
+
+      - uses: jiro4989/build-deb-action@v3
+        with:
+          package: meshtasticd
+          package_root: .debpkg
+          maintainer: Jonathan Bennett
+          version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
+          arch: amd64
+          depends: libyaml-cpp0.7, openssl, libulfius2.7
+          desc: Native Linux Meshtastic binary.
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
+          overwrite: true
+          path: |
+            ./*.deb

.github/workflows/package_raspbian.yml

@@ -17,14 +17,14 @@ jobs:
     needs: build-raspbian
     steps:
       - name: Checkout code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
           repo: meshtastic/web
           file: build.tar
@@ -36,15 +36,17 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v3
+        uses: actions/download-artifact@v4
         with:
           name: firmware-raspbian-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
 
       - name: Display structure of downloaded files
         run: ls -R
 
       - name: build .debpkg
         run: |
+          mkdir -p .debpkg/DEBIAN
           mkdir -p .debpkg/usr/share/doc/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
@@ -55,6 +57,8 @@ jobs:
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
+          echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
+          chmod +x .debpkg/DEBIAN/conffiles
 
       - uses: jiro4989/build-deb-action@v3
         with:
@@ -63,11 +67,12 @@ jobs:
           maintainer: Jonathan Bennett
           version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
           arch: arm64
-          depends: libyaml-cpp0.7, openssl
+          depends: libyaml-cpp0.7, openssl, libulfius2.7
           desc: Native Linux Meshtastic binary.
 
-      - uses: actions/upload-artifact@v3
+      - uses: actions/upload-artifact@v4
         with:
-          name: artifact-deb
+          name: meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          overwrite: true
           path: |
             ./*.deb

.github/workflows/package_raspbian_armv7l.yml

@@ -0,0 +1,78 @@
+name: Package Raspbian
+
+on:
+  workflow_call:
+  workflow_dispatch:
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian_armv7l:
+    uses: ./.github/workflows/build_raspbian_armv7l.yml
+
+  package-raspbian_armv7l:
+    runs-on: ubuntu-latest
+    needs: build-raspbian_armv7l
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Download artifacts
+        uses: actions/download-artifact@v4
+        with:
+          name: firmware-raspbian-armv7l-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: build .debpkg
+        run: |
+          mkdir -p .debpkg/DEBIAN
+          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
+          mkdir -p .debpkg/usr/sbin
+          mkdir -p .debpkg/etc/meshtasticd
+          mkdir -p .debpkg/usr/lib/systemd/system/
+          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
+          cp release/meshtasticd_linux_armv7l .debpkg/usr/sbin/meshtasticd
+          cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
+          chmod +x .debpkg/usr/sbin/meshtasticd
+          cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
+          echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
+          chmod +x .debpkg/DEBIAN/conffiles
+
+      - uses: jiro4989/build-deb-action@v3
+        with:
+          package: meshtasticd
+          package_root: .debpkg
+          maintainer: Jonathan Bennett
+          version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
+          arch: armhf
+          depends: libyaml-cpp0.7, openssl, libulfius2.7
+          desc: Native Linux Meshtastic binary.
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: meshtasticd_${{ steps.version.outputs.version }}_armhf.deb
+          overwrite: true
+          path: |
+            ./*.deb

.github/workflows/sec_sast_flawfinder.yml

@@ -16,7 +16,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
 
       # step 2
       - name: flawfinder_scan
@@ -27,14 +27,15 @@ jobs:
 
       # step 3
       - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: flawfinder_report.sarif
+          overwrite: true
           path: flawfinder_report.sarif
 
       # step 4
       - name: publish code scanning alerts
-        uses: github/codeql-action/upload-sarif@v2
+        uses: github/codeql-action/upload-sarif@v3
         with:
           sarif_file: flawfinder_report.sarif
           category: flawfinder

.github/workflows/sec_sast_semgrep_cron.yml

@@ -17,7 +17,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
 
       # step 2
       - name: full scan
@@ -29,14 +29,15 @@ jobs:
 
       # step 3
       - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: report.sarif
+          overwrite: true
           path: report.sarif
 
       # step 4
       - name: publish code scanning alerts
-        uses: github/codeql-action/upload-sarif@v2
+        uses: github/codeql-action/upload-sarif@v3
         with:
           sarif_file: report.sarif
           category: semgrep

.github/workflows/sec_sast_semgrep_pull.yml

@@ -11,7 +11,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
         with:
           fetch-depth: 0
 

.github/workflows/trunk-check.yml

@@ -16,7 +16,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/update_protobufs.yml

@@ -7,7 +7,7 @@ jobs:
 
     steps:
       - name: Checkout code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
         with:
           submodules: true
 
@@ -17,16 +17,16 @@ jobs:
 
       - name: Download nanopb
         run: |
-          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.7-linux-x86.tar.gz
-          tar xvzf nanopb-0.4.7-linux-x86.tar.gz
-          mv nanopb-0.4.7-linux-x86 nanopb-0.4.7
+          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.8-linux-x86.tar.gz
+          tar xvzf nanopb-0.4.8-linux-x86.tar.gz
+          mv nanopb-0.4.8-linux-x86 nanopb-0.4.8
 
       - name: Re-generate protocol buffers
         run: |
           ./bin/regen-protos.sh
 
       - name: Create pull request
-        uses: peter-evans/create-pull-request@v3
+        uses: peter-evans/create-pull-request@v6
         with:
           add-paths: |
             protobufs

.trunk/trunk.yaml

@@ -1,32 +1,32 @@
 version: 0.1
 cli:
-  version: 1.20.1
+  version: 1.22.1
 plugins:
   sources:
     - id: trunk
-      ref: v1.4.4
+      ref: v1.5.0
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - trufflehog@3.68.5
+    - trufflehog@3.76.3
     - yamllint@1.35.1
-    - bandit@1.7.7
-    - checkov@3.2.32
+    - bandit@1.7.8
+    - checkov@3.2.95
     - terrascan@1.19.1
-    - trivy@0.49.1
+    - trivy@0.51.1
     #- trufflehog@3.63.2-rc0
     - taplo@0.8.1
-    - ruff@0.3.1
+    - ruff@0.4.4
     - isort@5.13.2
-    - markdownlint@0.39.0
-    - oxipng@9.0.0
-    - svgo@3.2.0
-    - actionlint@1.6.27
+    - markdownlint@0.40.0
+    - oxipng@9.1.1
+    - svgo@3.3.2
+    - actionlint@1.7.0
     - flake8@7.0.0
     - hadolint@2.12.0
     - shfmt@3.6.0
-    - shellcheck@0.9.0
-    - black@24.2.0
+    - shellcheck@0.10.0
+    - black@24.4.2
     - git-diff-check
     - gitleaks@8.18.2
     - clang-format@16.0.3

Dockerfile

@@ -1,4 +1,4 @@
-FROM debian:bullseye-slim AS builder
+FROM debian:bookworm-slim AS builder
 
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
@@ -11,31 +11,45 @@ SHELL ["/bin/bash", "-o", "pipefail", "-c"]
 
 # Install build deps
 USER root
-RUN apt-get update && \
-	apt-get -y install wget python3 g++ zip python3-venv git vim ca-certificates libgpiod-dev libyaml-cpp-dev libbluetooth-dev
 
-# create a non-priveleged user & group
+# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
+RUN apt-get update && apt-get install --no-install-recommends -y wget python3 python3-pip python3-wheel python3-venv g++ zip git \
+                           ca-certificates libgpiod-dev libyaml-cpp-dev libbluetooth-dev \
+                           libulfius-dev liborcania-dev libssl-dev pkg-config && \
+    apt-get clean && rm -rf /var/lib/apt/lists/* && mkdir /tmp/firmware
+
+RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh && chown mesh:mesh /tmp/firmware
+USER mesh
+
+WORKDIR /tmp/firmware
+RUN python3 -m venv /tmp/firmware 
+RUN source ./bin/activate && pip3 install --no-cache-dir -U platformio==6.1.14
+# trunk-ignore(terrascan/AC_DOCKER_00024): We would actually like these files to be owned by mesh tyvm
+COPY --chown=mesh:mesh . /tmp/firmware
+RUN source ./bin/activate && chmod +x /tmp/firmware/bin/build-native.sh && ./bin/build-native.sh
+RUN cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
+
+
+##### PRODUCTION BUILD #############
+
+FROM debian:bookworm-slim
+ENV DEBIAN_FRONTEND=noninteractive
+ENV TZ=Etc/UTC
+
+# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
+RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libulfius2.7 liborcania2.3 libssl3 && \
+    apt-get clean && rm -rf /var/lib/apt/lists/*
+
 RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
-
 USER mesh
-RUN wget https://raw.githubusercontent.com/platformio/platformio-core-installer/master/get-platformio.py -qO /tmp/get-platformio.py && \
-	chmod +x /tmp/get-platformio.py && \
-	python3 /tmp/get-platformio.py && \
-	git clone https://github.com/meshtastic/firmware --recurse-submodules /tmp/firmware && \
-	cd /tmp/firmware && \
-	chmod +x /tmp/firmware/bin/build-native.sh && \
-	source ~/.platformio/penv/bin/activate && \
-	./bin/build-native.sh
 
-FROM frolvlad/alpine-glibc:glibc-2.31
-
-RUN apk --update add --no-cache g++ shadow && \
-	groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
-
-COPY --from=builder /tmp/firmware/release/meshtasticd_linux_x86_64 /home/mesh/
-
-USER mesh
 WORKDIR /home/mesh
-CMD sh -cx "./meshtasticd_linux_x86_64 --hwid '${HWID:-$RANDOM}'"
+COPY --from=builder /tmp/firmware/release/meshtasticd /home/mesh/
 
-HEALTHCHECK NONE
+VOLUME /home/mesh/data
+
+CMD [ "sh",  "-cx", "./meshtasticd -d /home/mesh/data --hwid=${HWID:-$RANDOM}" ]
+
+HEALTHCHECK NONE

arch/esp32/esp32.ini

@@ -1,7 +1,8 @@
 ; Common settings for ESP targes, mixin with extends = esp32_base
 [esp32_base]
 extends = arduino_base
-platform = platformio/espressif32@6.3.2 # This is a temporary fix to the S3-based devices bluetooth issues until we can determine what within ESP-IDF changed and can develop a suitable patch. 
+custom_esp32_kind = esp32
+platform = platformio/espressif32@6.7.0
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
@@ -15,8 +16,10 @@ board_build.filesystem = littlefs
 # Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
 # See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
 # This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
+build_unflags = -fno-lto
 build_flags =
   ${arduino_base.build_flags}
+  -flto
   -Wall
   -Wextra
   -Isrc/platform/esp32

arch/esp32/esp32c3.ini

@@ -1,5 +1,6 @@
 [esp32c3_base]
 extends = esp32_base
+custom_esp32_kind = esp32c3
 
 monitor_speed = 115200
 monitor_filters = esp32_c3_exception_decoder

arch/esp32/esp32s2.ini

@@ -1,15 +1,19 @@
 [esp32s2_base]
 extends = esp32_base
+custom_esp32_kind = esp32s2
 
 build_src_filter = 
-  ${esp32_base.build_src_filter} -<nimble/> -<mesh/raspihttp>
+ ${esp32_base.build_src_filter} - <libpax/> -<nimble/> -<mesh/raspihttp>
 
 monitor_speed = 115200
 
 build_flags =
   ${esp32_base.build_flags} 
   -DHAS_BLUETOOTH=0
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH
   
 lib_ignore = 
   ${esp32_base.lib_ignore} 
-  NimBLE-Arduino
+  NimBLE-Arduino
+  libpax

arch/esp32/esp32s3.ini

@@ -1,5 +1,6 @@
 [esp32s3_base]
 extends = esp32_base
+custom_esp32_kind = esp32s3
 
 monitor_speed = 115200
 

arch/nrf52/nrf52.ini

@@ -3,12 +3,13 @@
 platform = platformio/nordicnrf52@^10.4.0
 extends = arduino_base
 
-build_type = debug ; I'm debugging with ICE a lot now
+build_type = debug
 build_flags = 
   ${arduino_base.build_flags}
   -DSERIAL_BUFFER_SIZE=1024
   -Wno-unused-variable
   -Isrc/platform/nrf52
+  -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>

arch/portduino/portduino.ini

@@ -1,6 +1,6 @@
 ; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#a28dd5a9ccd5c48a9bede46037855ff83915d74b
+platform = https://github.com/meshtastic/platform-native.git#ad8112adf82ce1f5b917092cf32be07a077801a0
 framework = arduino
 
 build_src_filter = 
@@ -24,7 +24,7 @@ lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
   rweather/Crypto@^0.4.0
-  lovyan03/LovyanGFX@^1.1.12
+  https://github.com/lovyan03/LovyanGFX.git#5a39989aa2c9492572255b22f033843ec8900233
 
 build_flags =
   ${arduino_base.build_flags}
@@ -34,4 +34,4 @@ build_flags =
   -DPORTDUINO_LINUX_HARDWARE
   -lbluetooth
   -lgpiod
-  -lyaml-cpp
+  -lyaml-cpp

bin/build-native.sh

@@ -2,6 +2,17 @@
 
 set -e
 
+platformioFailed() {
+	[[ $VIRTUAL_ENV != "" ]] && exit 1 # don't hint at virtualenv if it's already in use
+	echo -e "\nThere were issues running platformio and you are not using a virtual environment." \
+		"\nYou may try setting up virtualenv and downloading the latest platformio from pip:" \
+		"\n\tvirtualenv venv" \
+		"\n\tsource venv/bin/activate" \
+		"\n\tpip install platformio" \
+		"\n\t./bin/build-native.sh # retry building"
+	exit 1
+}
+
 VERSION=$(bin/buildinfo.py long)
 SHORT_VERSION=$(bin/buildinfo.py short)
 
@@ -13,8 +24,8 @@ mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update
-pio run --environment native
-cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(arch)"
+platformio pkg update --environment native || platformioFailed
+pio run --environment native || platformioFailed
+cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(uname -m)"
 cp bin/device-install.* $OUTDIR
 cp bin/device-update.* $OUTDIR

bin/buildinfo.py

@@ -1,9 +1,8 @@
 #!/usr/bin/env python3
-import configparser
 import sys
+
 from readprops import readProps
 
-
-verObj = readProps('version.properties')
+verObj = readProps("version.properties")
 propName = sys.argv[1]
 print(f"{verObj[propName]}")

bin/config-dist.yaml

@@ -1,5 +1,6 @@
 ### Define your devices here using Broadcom pin numbering
 ### Uncomment the block that corresponds to your hardware
+### Including the "Module:" line!
 ---
 Lora:
 #  Module: sx1262  # Waveshare SX126X XXXM
@@ -37,11 +38,22 @@ Lora:
 #  Busy: 20
 #  Reset: 18
 
+#  Module: sx1268  # SX1268-based modules, tested with Ebyte E22 400M33S
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
+#  TXen: 6
+#  RXen: 12
+#  DIO3_TCXO_VOLTAGE: true
+
 #  DIO3_TCXO_VOLTAGE: true  # the Waveshare Core1262 and others are known to need this setting
 
 #  TXen: x  # TX and RX enable pins
 #  RXen: x
 
+#  ch341_quirk: true # Uncomment this to use the chunked SPI transfer that seems to fix the ch341
+
 ### Set gpio chip to use in /dev/. Defaults to 0.
 ### Notably the Raspberry Pi 5 puts the GPIO header on gpiochip4
 #  gpiochip: 4
@@ -95,23 +107,29 @@ Display:
 #  Panel: ILI9341
 #  CS: 8
 #  DC: 25
-#  Backlight: 2
-#  Width: 320
-#  Height: 240
+#  Width: 240
+#  Height: 320
+#  Rotate: true
 
 Touchscreen:
-#  Module: STMPE610
+### Note, at least for now, the touchscreen must have a CS pin defined, even if you let Linux manage the CS switching.
+
+#  Module: STMPE610 # Option 1 for Adafruit PiTFT 2.8
 #  CS: 7
 #  IRQ: 24
 
-#  Module: XPT2046
+#  Module: FT5x06 # Option 2 for Adafruit PiTFT 2.8
+#  IRQ: 24
+#  I2CAddr: 0x38
+
+#  Module: XPT2046 # Waveshare 2.8inch
 #  CS: 7
 #  IRQ: 17
 
 ### Configure device for direct keyboard input
 
 Input:
-#  KeyboardDevice: /dev/input/event0
+#  KeyboardDevice: /dev/input/by-id/usb-_Raspberry_Pi_Internal_Keyboard-event-kbd
 
 ###
 
@@ -121,3 +139,6 @@ Logging:
 Webserver:
 #  Port: 443 # Port for Webserver & Webservices
 #  RootPath: /usr/share/doc/meshtasticd/web # Root Dir of WebServer
+
+General:
+  MaxNodes: 200

bin/device-install.bat

@@ -32,7 +32,7 @@ IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
 	%PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
     
     @REM Account for S3 and C3 board's different OTA partition
-    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% (
+    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% IF x%FILENAME:station-g2=%==x%FILENAME% IF x%FILENAME:unphone=%==x%FILENAME% (
         IF x%FILENAME:esp32c3=%==x%FILENAME% (
             %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
         ) else (

bin/device-install.sh

@@ -52,7 +52,7 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
 	"$PYTHON" -m esptool erase_flash
 	"$PYTHON" -m esptool write_flash 0x00 ${FILENAME}
 	# Account for S3 board's different OTA partition
-	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ]; then
+	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ] && [ -n "${FILENAME##*"station-g2"*}" ] && [ -n "${FILENAME##*"unphone"*}" ]; then
 		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
 			"$PYTHON" -m esptool write_flash 0x260000 bleota.bin
 		else

bin/generate_ci_matrix.py

@@ -1,6 +1,6 @@
 #!/usr/bin/env python
 
-"""Generate the CI matrix"""
+"""Generate the CI matrix."""
 
 import configparser
 import json
@@ -34,5 +34,10 @@ for subdir, dirs, files in os.walk(rootdir):
                                     outlist.append(section)
                             else:
                                 outlist.append(section)
+                    if "board_check" in config[config[c].name]:
+                        if (config[config[c].name]["board_check"] == "true") & (
+                            "check" in options
+                        ):
+                            outlist.append(section)
 
 print(json.dumps(outlist))

bin/native-install.sh

@@ -1,6 +1,6 @@
 #!/usr/bin/env bash
 
-cp "release/meshtasticd_linux_$(arch)" /usr/sbin/meshtasticd
+cp "release/meshtasticd_linux_$(uname -m)" /usr/sbin/meshtasticd
 mkdir /etc/meshtasticd
 if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
 	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml

bin/platformio-custom.py

@@ -1,13 +1,14 @@
-import subprocess
-import configparser
-import traceback
+# trunk-ignore-all(ruff/F821)
+# trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
 from os.path import join
+
 from readprops import readProps
 
 Import("env")
 platform = env.PioPlatform()
 
+
 def esp32_create_combined_bin(source, target, env):
     # this sub is borrowed from ESPEasy build toolchain. It's licensed under GPL V3
     # https://github.com/letscontrolit/ESPEasy/blob/mega/tools/pio/post_esp32.py
@@ -20,8 +21,8 @@ def esp32_create_combined_bin(source, target, env):
     firmware_name = env.subst("$BUILD_DIR/${PROGNAME}.bin")
     chip = env.get("BOARD_MCU")
     flash_size = env.BoardConfig().get("upload.flash_size")
-    flash_freq = env.BoardConfig().get("build.f_flash", '40m')
-    flash_freq = flash_freq.replace('000000L', 'm')
+    flash_freq = env.BoardConfig().get("build.f_flash", "40m")
+    flash_freq = flash_freq.replace("000000L", "m")
     flash_mode = env.BoardConfig().get("build.flash_mode", "dio")
     memory_type = env.BoardConfig().get("build.arduino.memory_type", "qio_qspi")
     if flash_mode == "qio" or flash_mode == "qout":
@@ -51,23 +52,42 @@ def esp32_create_combined_bin(source, target, env):
     print(f" - {hex(app_offset)} | {firmware_name}")
     cmd += [hex(app_offset), firmware_name]
 
-    print('Using esptool.py arguments: %s' % ' '.join(cmd))
+    print("Using esptool.py arguments: %s" % " ".join(cmd))
 
     esptool.main(cmd)
 
-if (platform.name == "espressif32"):
+
+if platform.name == "espressif32":
     sys.path.append(join(platform.get_package_dir("tool-esptoolpy")))
     import esptool
-    env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", esp32_create_combined_bin)    
+
+    env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", esp32_create_combined_bin)
+
+    esp32_kind = env.GetProjectOption("custom_esp32_kind")
+    if esp32_kind == "esp32":
+        # Free up some IRAM by removing auxiliary SPI flash chip drivers.
+        # Wrapped stub symbols are defined in src/platform/esp32/iram-quirk.c.
+        env.Append(
+            LINKFLAGS=[
+                "-Wl,--wrap=esp_flash_chip_gd",
+                "-Wl,--wrap=esp_flash_chip_issi",
+                "-Wl,--wrap=esp_flash_chip_winbond",
+            ]
+        )
+    else:
+        # For newer ESP32 targets, using newlib nano works better.
+        env.Append(LINKFLAGS=["--specs=nano.specs", "-u", "_printf_float"])
 
 Import("projenv")
 
 prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
-print("Using meshtastic platformio-custom.py, firmware version " + verObj['long'])
+print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"])
 
 # General options that are passed to the C and C++ compilers
-projenv.Append(CCFLAGS=[
-    "-DAPP_VERSION=" + verObj['long'],
-    "-DAPP_VERSION_SHORT=" + verObj['short']    
-])
+projenv.Append(
+    CCFLAGS=[
+        "-DAPP_VERSION=" + verObj["long"],
+        "-DAPP_VERSION_SHORT=" + verObj["short"],
+    ]
+)

bin/regen-protos.bat

@@ -1 +1 @@
-cd protobufs && ..\nanopb-0.4.7\generator-bin\protoc.exe --experimental_allow_proto3_optional --nanopb_out=-v:..\src\mesh\generated -I=..\protobufs ..\protobufs\meshtastic\*.proto
+cd protobufs && ..\nanopb-0.4.8\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto

bin/regen-protos.sh

@@ -2,19 +2,10 @@
 
 set -e
 
-echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.7 to be located in the"
+echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.8 to be located in the"
 echo "firmware root directory if the following step fails, you should download the correct"
-echo "prebuilt binaries for your computer into nanopb-0.4.7"
+echo "prebuilt binaries for your computer into nanopb-0.4.8"
 
 # the nanopb tool seems to require that the .options file be in the current directory!
 cd protobufs
-../nanopb-0.4.7/generator-bin/protoc --nanopb_out=-v:../src/mesh/generated/ -I=../protobufs meshtastic/*.proto --experimental_allow_proto3_optional
-
-# cd ../src/mesh/generated/meshtastic
-# sed -i 's/#include "meshtastic/#include "./g' -- *
-
-# sed -i 's/meshtastic_//g' -- *
-
-#echo "Regenerating protobuf documentation - if you see an error message"
-#echo "you can ignore it unless doing a new protobuf release to github."
-#bin/regen-docs.sh
+../nanopb-0.4.8/generator-bin/protoc --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto

boards/CDEBYTE_EoRa-S3.json

@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-D CDEBYTE_EORA_S3",
+      "-D ARDUINO_USB_CDC_ON_BOOT=1",
+      "-D ARDUINO_USB_MODE=0",
+      "-D ARDUINO_RUNNING_CORE=1",
+      "-D ARDUINO_EVENT_RUNNING_CORE=1",
+      "-D BOARD_HAS_PSRAM"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "CDEBYTE_EoRa-S3"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "CDEBYTE EoRa-S3",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 4194304,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.cdebyte.com/Module-Testkits-EoRaPI",
+  "vendor": "CDEBYTE"
+}

boards/ESP32-S3-WROOM-1-N4.json

@@ -0,0 +1,39 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-D ARDUINO_USB_CDC_ON_BOOT=0",
+      "-D ARDUINO_USB_MSC_ON_BOOT=0",
+      "-D ARDUINO_USB_DFU_ON_BOOT=0",
+      "-D ARDUINO_USB_MODE=0",
+      "-D ARDUINO_RUNNING_CORE=1",
+      "-D ARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "ESP32-S3-WROOM-1-N4"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "ESP32-S3-WROOM-1-N4 (4 MB Flash, No PSRAM)",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 524288,
+    "maximum_size": 4194304,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf",
+  "vendor": "Espressif"
+}

boards/promicro-nrf52840.json

@@ -0,0 +1,52 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x00B3"],
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "ProMicro compatible nRF52840",
+    "mcu": "nrf52840",
+    "variant": "promicro_diy",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "ProMicro compatible nRF52840",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["nrfutil", "jlink", "nrfjprog", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.nologo.tech/product/otherboard/NRF52840.html",
+  "vendor": "Nologo"
+}

boards/wio-sdk-wm1110.json

@@ -0,0 +1,58 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "WIO-BOOT",
+    "mcu": "nrf52840",
+    "variant": "Seeed_WIO_WM1110",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed WIO WM1110",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/Wio-WM1110-Dev-Kit-p-5677.html",
+  "vendor": "Seeed Studio"
+}

boards/wio-tracker-wm1110.json

@@ -0,0 +1,58 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "WIO-BOOT",
+    "mcu": "nrf52840",
+    "variant": "Seeed_WIO_WM1110",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed WIO WM1110",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/Wio-WM1110-Dev-Kit-p-5677.html",
+  "vendor": "Seeed Studio"
+}

boards/wiphone.json

@@ -0,0 +1,34 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32_out.ld",
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DARDUINO_WIPHONE14",
+      "-DBOARD_HAS_PSRAM",
+      "-mfix-esp32-psram-cache-issue",
+      "-mfix-esp32-psram-cache-strategy=memw"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "40000000L",
+    "flash_mode": "dio",
+    "mcu": "esp32",
+    "variant": "wiphone",
+    "board": "WiPhone"
+  },
+  "connectivity": ["wifi", "bluetooth"],
+  "frameworks": ["arduino", "espidf"],
+  "name": "WIPhone Integrated 1.4",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 532480,
+    "maximum_size": 6553600,
+    "maximum_data_size": 4521984,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.wiphone.io/",
+  "vendor": "HackEDA"
+}

boards/wiscore_rak11200.json

@@ -4,7 +4,7 @@
       "ldscript": "esp32_out.ld"
     },
     "core": "esp32",
-    "extra_flags": "-DARDUINO_ESP32_DEV",
+    "extra_flags": ["-DBOARD_HAS_PSRAM", "-DARDUINO_ESP32_DEV"],
     "f_cpu": "240000000L",
     "f_flash": "40000000L",
     "flash_mode": "dio",

platformio.ini

@@ -74,13 +74,13 @@ build_flags = -Wno-missing-field-initializers
 monitor_speed = 115200
 
 lib_deps =
-  jgromes/RadioLib@^6.4.0
+  jgromes/RadioLib@~6.6.0
   https://github.com/meshtastic/esp8266-oled-ssd1306.git#ee628ee6c9588d4c56c9e3da35f0fc9448ad54a8 ; ESP8266_SSD1306
   mathertel/OneButton@^2.5.0 ; OneButton library for non-blocking button debounce
   https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
-  https://github.com/meshtastic/TinyGPSPlus.git#f9f4fef2183514aa52be91d714c1455dd6f26e45
+  https://github.com/meshtastic/TinyGPSPlus.git#71a82db35f3b973440044c476d4bcdc673b104f4
   https://github.com/meshtastic/ArduinoThread.git#1ae8778c85d0a2a729f989e0b1e7d7c4dc84eef0
-  nanopb/Nanopb@^0.4.7
+  nanopb/Nanopb@^0.4.8
   erriez/ErriezCRC32@^1.0.1
 
 ; Used for the code analysis in PIO Home / Inspect
@@ -96,7 +96,6 @@ check_flags =
 framework = arduino
 lib_deps =
   ${env.lib_deps}
-  mprograms/QMC5883LCompass@^1.2.0
   end2endzone/NonBlockingRTTTL@^1.3.0
   https://github.com/meshtastic/SparkFun_ATECCX08a_Arduino_Library.git#5cf62b36c6f30bc72a07bdb2c11fc9a22d1e31da
 
@@ -119,7 +118,7 @@ lib_deps =
   adafruit/Adafruit BMP280 Library@^2.6.8
   adafruit/Adafruit BMP085 Library@^1.2.4
   adafruit/Adafruit BME280 Library@^2.2.2
-  https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.5.2400
+  https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.7.2502
   boschsensortec/BME68x Sensor Library@^1.1.40407
   adafruit/Adafruit MCP9808 Library@^2.0.0
   https://github.com/KodinLanewave/INA3221@^1.0.0
@@ -131,4 +130,14 @@ lib_deps =
   adafruit/Adafruit PM25 AQI Sensor@^1.0.6
   adafruit/Adafruit MPU6050@^2.2.4
   adafruit/Adafruit LIS3DH@^1.2.4
-  https://github.com/lewisxhe/SensorLib#27fd0f721e20cd09e1f81383f0ba58a54fe84a17
+  adafruit/Adafruit AHTX0@^2.0.5
+  lewisxhe/SensorLib@^0.2.0
+  adafruit/Adafruit LSM6DS@^4.7.2
+  mprograms/QMC5883LCompass@^1.2.0
+  adafruit/Adafruit VEML7700 Library@^2.1.6
+  adafruit/Adafruit SHT4x Library@^1.0.4
+  adafruit/Adafruit TSL2591 Library@^1.4.5
+  ClosedCube OPT3001@^1.1.2
+  emotibit/EmotiBit MLX90632@^1.0.8
+  dfrobot/DFRobot_RTU@^1.0.3
+  https://github.com/meshtastic/DFRobot_LarkWeatherStation#0e884fc86b7a0b602c7ff3d26b893b997f15c6ac

src/AccelerometerThread.h

@@ -1,22 +1,24 @@
+#pragma once
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+
 #include "PowerFSM.h"
 #include "concurrency/OSThread.h"
-#include "configuration.h"
 #include "main.h"
 #include "power.h"
 
 #include <Adafruit_LIS3DH.h>
+#include <Adafruit_LSM6DS3TRC.h>
 #include <Adafruit_MPU6050.h>
 #include <Arduino.h>
 #include <SensorBMA423.hpp>
 #include <Wire.h>
 
-SensorBMA423 bmaSensor;
-bool BMA_IRQ = false;
-
 #define ACCELEROMETER_CHECK_INTERVAL_MS 100
 #define ACCELEROMETER_CLICK_THRESHOLD 40
 
-int readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
+static inline int readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
 {
     Wire.beginTransmission(address);
     Wire.write(reg);
@@ -29,7 +31,7 @@ int readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
     return 0; // Pass
 }
 
-int writeRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
+static inline int writeRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
 {
     Wire.beginTransmission(address);
     Wire.write(reg);
@@ -37,8 +39,6 @@ int writeRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
     return (0 != Wire.endTransmission());
 }
 
-namespace concurrency
-{
 class AccelerometerThread : public concurrency::OSThread
 {
   public:
@@ -49,14 +49,55 @@ class AccelerometerThread : public concurrency::OSThread
             disable();
             return;
         }
+        acceleremoter_type = type;
 
         if (!config.display.wake_on_tap_or_motion && !config.device.double_tap_as_button_press) {
             LOG_DEBUG("AccelerometerThread disabling due to no interested configurations\n");
             disable();
             return;
         }
+        init();
+    }
 
-        acceleremoter_type = type;
+    void start()
+    {
+        init();
+        setIntervalFromNow(0);
+    };
+
+  protected:
+    int32_t runOnce() override
+    {
+        canSleep = true; // Assume we should not keep the board awake
+
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) {
+            wakeScreen();
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) {
+            uint8_t click = lis.getClick();
+            if (!config.device.double_tap_as_button_press) {
+                wakeScreen();
+            }
+
+            if (config.device.double_tap_as_button_press && (click & 0x20)) {
+                buttonPress();
+                return 500;
+            }
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.readIrqStatus() != DEV_WIRE_NONE) {
+            if (bmaSensor.isTilt() || bmaSensor.isDoubleTap()) {
+                wakeScreen();
+                return 500;
+            }
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LSM6DS3 && lsm.shake()) {
+            wakeScreen();
+            return 500;
+        }
+
+        return ACCELEROMETER_CHECK_INTERVAL_MS;
+    }
+
+  private:
+    void init()
+    {
         LOG_DEBUG("AccelerometerThread initializing\n");
 
         if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.begin(accelerometer_found.address)) {
@@ -108,37 +149,17 @@ class AccelerometerThread : public concurrency::OSThread
             bmaSensor.enableTiltIRQ();
             // It corresponds to isDoubleClick interrupt
             bmaSensor.enableWakeupIRQ();
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LSM6DS3 && lsm.begin_I2C(accelerometer_found.address)) {
+            LOG_DEBUG("LSM6DS3 initializing\n");
+            // Default threshold of 2G, less sensitive options are 4, 8 or 16G
+            lsm.setAccelRange(LSM6DS_ACCEL_RANGE_2_G);
+#ifndef LSM6DS3_WAKE_THRESH
+#define LSM6DS3_WAKE_THRESH 20
+#endif
+            lsm.enableWakeup(config.display.wake_on_tap_or_motion, 1, LSM6DS3_WAKE_THRESH);
+            // Duration is number of occurances needed to trigger, higher threshold is less sensitive
         }
     }
-
-  protected:
-    int32_t runOnce() override
-    {
-        canSleep = true; // Assume we should not keep the board awake
-
-        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) {
-            wakeScreen();
-        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) {
-            uint8_t click = lis.getClick();
-            if (!config.device.double_tap_as_button_press) {
-                wakeScreen();
-            }
-
-            if (config.device.double_tap_as_button_press && (click & 0x20)) {
-                buttonPress();
-                return 500;
-            }
-        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.readIrqStatus() != DEV_WIRE_NONE) {
-            if (bmaSensor.isTilt() || bmaSensor.isDoubleTap()) {
-                wakeScreen();
-                return 500;
-            }
-        }
-
-        return ACCELEROMETER_CHECK_INTERVAL_MS;
-    }
-
-  private:
     void wakeScreen()
     {
         if (powerFSM.getState() == &stateDARK) {
@@ -156,6 +177,9 @@ class AccelerometerThread : public concurrency::OSThread
     ScanI2C::DeviceType acceleremoter_type;
     Adafruit_MPU6050 mpu;
     Adafruit_LIS3DH lis;
+    Adafruit_LSM6DS3TRC lsm;
+    SensorBMA423 bmaSensor;
+    bool BMA_IRQ = false;
 };
 
-} // namespace concurrency
+#endif

src/AmbientLightingThread.h

@@ -5,6 +5,16 @@
 NCP5623 rgb;
 #endif
 
+#ifdef HAS_NEOPIXEL
+#include <graphics/NeoPixel.h>
+Adafruit_NeoPixel pixels(NEOPIXEL_COUNT, NEOPIXEL_DATA, NEOPIXEL_TYPE);
+#endif
+
+#ifdef UNPHONE
+#include "unPhone.h"
+extern unPhone unphone;
+#endif
+
 namespace concurrency
 {
 class AmbientLightingThread : public concurrency::OSThread
@@ -27,15 +37,31 @@ class AmbientLightingThread : public concurrency::OSThread
             disable();
             return;
         }
+#endif
+#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
         if (!moduleConfig.ambient_lighting.led_state) {
             LOG_DEBUG("AmbientLightingThread disabling due to moduleConfig.ambient_lighting.led_state OFF\n");
             disable();
             return;
         }
         LOG_DEBUG("AmbientLightingThread initializing\n");
+#ifdef HAS_NCP5623
         if (_type == ScanI2C::NCP5623) {
             rgb.begin();
+#endif
+#ifdef RGBLED_RED
+            pinMode(RGBLED_RED, OUTPUT);
+            pinMode(RGBLED_GREEN, OUTPUT);
+            pinMode(RGBLED_BLUE, OUTPUT);
+#endif
+#ifdef HAS_NEOPIXEL
+            pixels.begin(); // Initialise the pixel(s)
+            pixels.clear(); // Set all pixel colors to 'off'
+            pixels.setBrightness(moduleConfig.ambient_lighting.current);
+#endif
             setLighting();
+#endif
+#ifdef HAS_NCP5623
         }
 #endif
     }
@@ -43,16 +69,17 @@ class AmbientLightingThread : public concurrency::OSThread
   protected:
     int32_t runOnce() override
     {
+#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
 #ifdef HAS_NCP5623
         if (_type == ScanI2C::NCP5623 && moduleConfig.ambient_lighting.led_state) {
+#endif
             setLighting();
             return 30000; // 30 seconds to reset from any animations that may have been running from Ext. Notification
-        } else {
-            return disable();
+#ifdef HAS_NCP5623
         }
-#else
-        return disable();
 #endif
+#endif
+        return disable();
     }
 
   private:
@@ -65,9 +92,36 @@ class AmbientLightingThread : public concurrency::OSThread
         rgb.setRed(moduleConfig.ambient_lighting.red);
         rgb.setGreen(moduleConfig.ambient_lighting.green);
         rgb.setBlue(moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Initializing Ambient lighting w/ current=%d, red=%d, green=%d, blue=%d\n",
+        LOG_DEBUG("Initializing NCP5623 Ambient lighting w/ current=%d, red=%d, green=%d, blue=%d\n",
                   moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
                   moduleConfig.ambient_lighting.blue);
+#endif
+#ifdef HAS_NEOPIXEL
+        pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                                 moduleConfig.ambient_lighting.blue),
+                    0, NEOPIXEL_COUNT);
+        pixels.show();
+        LOG_DEBUG("Initializing NeoPixel Ambient lighting w/ brightness(current)=%d, red=%d, green=%d, blue=%d\n",
+                  moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                  moduleConfig.ambient_lighting.blue);
+#endif
+#ifdef RGBLED_CA
+        analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);
+        analogWrite(RGBLED_GREEN, 255 - moduleConfig.ambient_lighting.green);
+        analogWrite(RGBLED_BLUE, 255 - moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Initializing Ambient lighting RGB Common Anode w/ red=%d, green=%d, blue=%d\n",
+                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+#elif defined(RGBLED_RED)
+        analogWrite(RGBLED_RED, moduleConfig.ambient_lighting.red);
+        analogWrite(RGBLED_GREEN, moduleConfig.ambient_lighting.green);
+        analogWrite(RGBLED_BLUE, moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Initializing Ambient lighting RGB Common Cathode w/ red=%d, green=%d, blue=%d\n",
+                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+#endif
+#ifdef UNPHONE
+        unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Initializing unPhone Ambient lighting w/ red=%d, green=%d, blue=%d\n", moduleConfig.ambient_lighting.red,
+                  moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
     }
 };

src/ButtonThread.cpp

@@ -1,10 +1,12 @@
 #include "ButtonThread.h"
+#include "configuration.h"
+#if !MESHTASTIC_EXCLUDE_GPS
 #include "GPS.h"
+#endif
 #include "MeshService.h"
 #include "PowerFSM.h"
 #include "RadioLibInterface.h"
 #include "buzz.h"
-#include "graphics/Screen.h"
 #include "main.h"
 #include "modules/ExternalNotificationModule.h"
 #include "power.h"
@@ -21,18 +23,24 @@
 
 using namespace concurrency;
 
+ButtonThread *buttonThread; // Declared extern in header
 volatile ButtonThread::ButtonEventType ButtonThread::btnEvent = ButtonThread::BUTTON_EVENT_NONE;
 
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+OneButton ButtonThread::userButton; // Get reference to static member
+#endif
+
 ButtonThread::ButtonThread() : OSThread("Button")
 {
-#if defined(ARCH_PORTDUINO) || defined(BUTTON_PIN)
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+
 #if defined(ARCH_PORTDUINO)
     if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
-        userButton = OneButton(settingsMap[user], true, true);
+        this->userButton = OneButton(settingsMap[user], true, true);
         LOG_DEBUG("Using GPIO%02d for button\n", settingsMap[user]);
     }
 #elif defined(BUTTON_PIN)
-    int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN;
+    int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN; // Resolved button pin
     this->userButton = OneButton(pin, true, true);
     LOG_DEBUG("Using GPIO%02d for button\n", pin);
 #endif
@@ -41,31 +49,20 @@ ButtonThread::ButtonThread() : OSThread("Button")
     // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
     pinMode(pin, INPUT_PULLUP_SENSE);
 #endif
+
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
     userButton.attachClick(userButtonPressed);
-    userButton.setClickMs(250);
-    userButton.setPressMs(c_longPressTime);
+    userButton.setClickMs(BUTTON_CLICK_MS);
+    userButton.setPressMs(BUTTON_LONGPRESS_MS);
     userButton.setDebounceMs(1);
     userButton.attachDoubleClick(userButtonDoublePressed);
-    userButton.attachMultiClick(userButtonMultiPressed);
+    userButton.attachMultiClick(userButtonMultiPressed, this); // Reference to instance: get click count from non-static OneButton
 #ifndef T_DECK // T-Deck immediately wakes up after shutdown, so disable this function
     userButton.attachLongPressStart(userButtonPressedLongStart);
     userButton.attachLongPressStop(userButtonPressedLongStop);
 #endif
-#if defined(ARCH_PORTDUINO)
-    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
-        wakeOnIrq(settingsMap[user], FALLING);
-#else
-    static OneButton *pBtn = &userButton; // only one instance of ButtonThread is created, so static is safe
-    attachInterrupt(
-        pin,
-        []() {
-            BaseType_t higherWake = 0;
-            mainDelay.interruptFromISR(&higherWake);
-            pBtn->tick();
-        },
-        CHANGE);
-#endif
 #endif
+
 #ifdef BUTTON_PIN_ALT
     userButtonAlt = OneButton(BUTTON_PIN_ALT, true, true);
 #ifdef INPUT_PULLUP_SENSE
@@ -73,19 +70,21 @@ ButtonThread::ButtonThread() : OSThread("Button")
     pinMode(BUTTON_PIN_ALT, INPUT_PULLUP_SENSE);
 #endif
     userButtonAlt.attachClick(userButtonPressed);
-    userButtonAlt.setClickMs(250);
-    userButtonAlt.setPressMs(c_longPressTime);
+    userButtonAlt.setClickMs(BUTTON_CLICK_MS);
+    userButtonAlt.setPressMs(BUTTON_LONGPRESS_MS);
     userButtonAlt.setDebounceMs(1);
     userButtonAlt.attachDoubleClick(userButtonDoublePressed);
     userButtonAlt.attachLongPressStart(userButtonPressedLongStart);
     userButtonAlt.attachLongPressStop(userButtonPressedLongStop);
-    wakeOnIrq(BUTTON_PIN_ALT, FALLING);
 #endif
 
 #ifdef BUTTON_PIN_TOUCH
     userButtonTouch = OneButton(BUTTON_PIN_TOUCH, true, true);
-    userButtonTouch.attachClick(touchPressed);
-    wakeOnIrq(BUTTON_PIN_TOUCH, FALLING);
+    userButtonTouch.setPressMs(BUTTON_TOUCH_MS);
+    userButtonTouch.attachLongPressStart(touchPressedLongStart); // Better handling with longpress than click?
+#endif
+
+    attachButtonInterrupts();
 #endif
 }
 
@@ -136,25 +135,44 @@ int32_t ButtonThread::runOnce()
 
         case BUTTON_EVENT_DOUBLE_PRESSED: {
             LOG_BUTTON("Double press!\n");
-#if defined(USE_EINK) && defined(PIN_EINK_EN)
-            digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
-#endif
             service.refreshLocalMeshNode();
-            service.sendNetworkPing(NODENUM_BROADCAST, true);
-            if (screen)
-                screen->print("Sent ad-hoc ping\n");
+            auto sentPosition = service.trySendPosition(NODENUM_BROADCAST, true);
+            if (screen) {
+                if (sentPosition)
+                    screen->print("Sent ad-hoc position\n");
+                else
+                    screen->print("Sent ad-hoc nodeinfo\n");
+                screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
+            }
             break;
         }
 
         case BUTTON_EVENT_MULTI_PRESSED: {
-            LOG_BUTTON("Multi press!\n");
-            if (!config.device.disable_triple_click && (gps != nullptr)) {
-                gps->toggleGpsMode();
-                if (screen)
-                    screen->forceDisplay();
-            }
+            LOG_BUTTON("Mulitipress! %hux\n", multipressClickCount);
+            switch (multipressClickCount) {
+#if HAS_GPS
+            // 3 clicks: toggle GPS
+            case 3:
+                if (!config.device.disable_triple_click && (gps != nullptr)) {
+                    gps->toggleGpsMode();
+                    if (screen)
+                        screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
+                }
+                break;
+#endif
+#if defined(USE_EINK) && defined(PIN_EINK_EN) // i.e. T-Echo
+            // 4 clicks: toggle backlight
+            case 4:
+                digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
+                break;
+#endif
+            // No valid multipress action
+            default:
+                break;
+            } // end switch: click count
+
             break;
-        }
+        } // end multipress event
 
         case BUTTON_EVENT_LONG_PRESSED: {
             LOG_BUTTON("Long press!\n");
@@ -174,21 +192,85 @@ int32_t ButtonThread::runOnce()
             power->shutdown();
             break;
         }
-        case BUTTON_EVENT_TOUCH_PRESSED: {
+
+#ifdef BUTTON_PIN_TOUCH
+        case BUTTON_EVENT_TOUCH_LONG_PRESSED: {
             LOG_BUTTON("Touch press!\n");
-            if (screen)
+            if (screen) {
+                // Wake if asleep
+                if (powerFSM.getState() == &stateDARK)
+                    powerFSM.trigger(EVENT_PRESS);
+
+                // Update display (legacy behaviour)
                 screen->forceDisplay();
+            }
             break;
         }
+#endif // BUTTON_PIN_TOUCH
+
         default:
             break;
         }
         btnEvent = BUTTON_EVENT_NONE;
     }
 
+    runASAP = false;
     return 50;
 }
 
+/*
+ * Attach (or re-attach) hardware interrupts for buttons
+ * Public method. Used outside class when waking from MCU sleep
+ */
+void ButtonThread::attachButtonInterrupts()
+{
+#if defined(ARCH_PORTDUINO)
+    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
+        wakeOnIrq(settingsMap[user], FALLING);
+#elif defined(BUTTON_PIN)
+    // Interrupt for user button, during normal use. Improves responsiveness.
+    attachInterrupt(
+        config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN,
+        []() {
+            ButtonThread::userButton.tick();
+            runASAP = true;
+            BaseType_t higherWake = 0;
+            mainDelay.interruptFromISR(&higherWake);
+        },
+        CHANGE);
+#endif
+
+#ifdef BUTTON_PIN_ALT
+    wakeOnIrq(BUTTON_PIN_ALT, FALLING);
+#endif
+
+#ifdef BUTTON_PIN_TOUCH
+    wakeOnIrq(BUTTON_PIN_TOUCH, FALLING);
+#endif
+}
+
+/*
+ * Detach the "normal" button interrupts.
+ * Public method. Used before attaching a "wake-on-button" interrupt for MCU sleep
+ */
+void ButtonThread::detachButtonInterrupts()
+{
+#if defined(ARCH_PORTDUINO)
+    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
+        detachInterrupt(settingsMap[user]);
+#elif defined(BUTTON_PIN)
+    detachInterrupt(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
+#endif
+
+#ifdef BUTTON_PIN_ALT
+    detachInterrupt(BUTTON_PIN_ALT);
+#endif
+
+#ifdef BUTTON_PIN_TOUCH
+    detachInterrupt(BUTTON_PIN_TOUCH);
+#endif
+}
+
 /**
  * Watch a GPIO and if we get an IRQ, wake the main thread.
  * Use to add wake on button press
@@ -200,10 +282,30 @@ void ButtonThread::wakeOnIrq(int irq, int mode)
         [] {
             BaseType_t higherWake = 0;
             mainDelay.interruptFromISR(&higherWake);
+            runASAP = true;
         },
         FALLING);
 }
 
+// Static callback
+void ButtonThread::userButtonMultiPressed(void *callerThread)
+{
+    // Grab click count from non-static button, while the info is still valid
+    ButtonThread *thread = (ButtonThread *)callerThread;
+    thread->storeClickCount();
+
+    // Then handle later, in the usual way
+    btnEvent = BUTTON_EVENT_MULTI_PRESSED;
+}
+
+// Non-static method, runs during callback. Grabs info while still valid
+void ButtonThread::storeClickCount()
+{
+#ifdef BUTTON_PIN
+    multipressClickCount = userButton.getNumberClicks();
+#endif
+}
+
 void ButtonThread::userButtonPressedLongStart()
 {
     if (millis() > c_holdOffTime) {

src/ButtonThread.h

@@ -4,11 +4,22 @@
 #include "concurrency/OSThread.h"
 #include "configuration.h"
 
+#ifndef BUTTON_CLICK_MS
+#define BUTTON_CLICK_MS 250
+#endif
+
+#ifndef BUTTON_LONGPRESS_MS
+#define BUTTON_LONGPRESS_MS 5000
+#endif
+
+#ifndef BUTTON_TOUCH_MS
+#define BUTTON_TOCH_MS 400
+#endif
+
 class ButtonThread : public concurrency::OSThread
 {
   public:
-    static const uint32_t c_longPressTime = 5000; // shutdown after 5s
-    static const uint32_t c_holdOffTime = 30000;  // hold off 30s after boot
+    static const uint32_t c_holdOffTime = 30000; // hold off 30s after boot
 
     enum ButtonEventType {
         BUTTON_EVENT_NONE,
@@ -17,15 +28,18 @@ class ButtonThread : public concurrency::OSThread
         BUTTON_EVENT_MULTI_PRESSED,
         BUTTON_EVENT_LONG_PRESSED,
         BUTTON_EVENT_LONG_RELEASED,
-        BUTTON_EVENT_TOUCH_PRESSED
+        BUTTON_EVENT_TOUCH_LONG_PRESSED,
     };
 
     ButtonThread();
     int32_t runOnce() override;
+    void attachButtonInterrupts();
+    void detachButtonInterrupts();
+    void storeClickCount();
 
   private:
-#ifdef BUTTON_PIN
-    OneButton userButton;
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+    static OneButton userButton; // Static - accessed from an interrupt
 #endif
 #ifdef BUTTON_PIN_ALT
     OneButton userButtonAlt;
@@ -33,20 +47,22 @@ class ButtonThread : public concurrency::OSThread
 #ifdef BUTTON_PIN_TOUCH
     OneButton userButtonTouch;
 #endif
-#if defined(ARCH_PORTDUINO)
-    OneButton userButton;
-#endif
 
     // set during IRQ
     static volatile ButtonEventType btnEvent;
 
+    // Store click count during callback, for later use
+    volatile int multipressClickCount = 0;
+
     static void wakeOnIrq(int irq, int mode);
 
     // IRQ callbacks
-    static void touchPressed() { btnEvent = BUTTON_EVENT_TOUCH_PRESSED; }
     static void userButtonPressed() { btnEvent = BUTTON_EVENT_PRESSED; }
     static void userButtonDoublePressed() { btnEvent = BUTTON_EVENT_DOUBLE_PRESSED; }
-    static void userButtonMultiPressed() { btnEvent = BUTTON_EVENT_MULTI_PRESSED; }
+    static void userButtonMultiPressed(void *callerThread); // Retrieve click count from non-static Onebutton while still valid
     static void userButtonPressedLongStart();
     static void userButtonPressedLongStop();
+    static void touchPressedLongStart() { btnEvent = BUTTON_EVENT_TOUCH_LONG_PRESSED; }
 };
+
+extern ButtonThread *buttonThread;

src/DebugConfiguration.h

@@ -36,7 +36,7 @@
 #define LOG_CRIT(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_TRACE(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #else
-#ifdef DEBUG_PORT
+#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
 #define LOG_DEBUG(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_DEBUG, __VA_ARGS__)
 #define LOG_INFO(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_INFO, __VA_ARGS__)
 #define LOG_WARN(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_WARN, __VA_ARGS__)

src/FSCommon.cpp

@@ -205,6 +205,62 @@ void rmDir(const char *dirname)
 #endif
 }
 
+bool fsCheck()
+{
+#if defined(ARCH_NRF52)
+    size_t write_size = 0;
+    size_t read_size = 0;
+    char buf[32] = {0};
+
+    Adafruit_LittleFS_Namespace::File file(FSCom);
+    const char *text = "meshtastic fs test";
+    size_t text_length = strlen(text);
+    const char *filename = "/meshtastic.txt";
+
+    LOG_DEBUG("Try create file .\n");
+    if (file.open(filename, FILE_O_WRITE)) {
+        write_size = file.write(text);
+    } else {
+        LOG_DEBUG("Open file failed .\n");
+        goto FORMAT_FS;
+    }
+
+    if (write_size != text_length) {
+        LOG_DEBUG("Text bytes do not match .\n");
+        file.close();
+        goto FORMAT_FS;
+    }
+
+    file.close();
+
+    if (!file.open(filename, FILE_O_READ)) {
+        LOG_DEBUG("Open file failed .\n");
+        goto FORMAT_FS;
+    }
+
+    read_size = file.readBytes(buf, text_length);
+    if (read_size != text_length) {
+        LOG_DEBUG("Text bytes do not match .\n");
+        file.close();
+        goto FORMAT_FS;
+    }
+
+    if (memcmp(buf, text, text_length) != 0) {
+        LOG_DEBUG("The written bytes do not match the read bytes .\n");
+        file.close();
+        goto FORMAT_FS;
+    }
+    return true;
+FORMAT_FS:
+    LOG_DEBUG("Format FS ....\n");
+    FSCom.format();
+    FSCom.begin();
+    return false;
+#else
+    return true;
+#endif
+}
+
 void fsInit()
 {
 #ifdef FSCom
@@ -212,8 +268,37 @@ void fsInit()
         LOG_ERROR("Filesystem mount Failed.\n");
         // assert(0); This auto-formats the partition, so no need to fail here.
     }
-#ifdef ARCH_ESP32
+#if defined(ARCH_ESP32)
     LOG_DEBUG("Filesystem files (%d/%d Bytes):\n", FSCom.usedBytes(), FSCom.totalBytes());
+#elif defined(ARCH_NRF52)
+    /*
+     * nRF52840 has a certain chance of automatic formatting failure.
+     * Try to create a file after initializing the file system. If the creation fails,
+     * it means that the file system is not working properly. Please format it manually again.
+     * To check the normality of the file system, you need to disable the LFS_NO_ASSERT assertion.
+     * Otherwise, the assertion will be entered at the moment of reading or opening, and the FS will not be formatted.
+     * */
+    bool ret = false;
+    uint8_t retry = 3;
+
+    while (retry--) {
+        ret = fsCheck();
+        if (ret) {
+            LOG_DEBUG("File system check is OK.\n");
+            break;
+        }
+        delay(10);
+    }
+
+    // It may not be possible to reach this step.
+    // Add a loop here to prevent unpredictable situations from happening.
+    // Can add a screen to display error status later.
+    if (!ret) {
+        while (1) {
+            LOG_ERROR("The file system is damaged and cannot proceed to the next step.\n");
+            delay(1000);
+        }
+    }
 #else
     LOG_DEBUG("Filesystem files:\n");
 #endif

src/GPSStatus.h

@@ -4,8 +4,6 @@
 #include "configuration.h"
 #include <Arduino.h>
 
-extern NodeDB nodeDB;
-
 namespace meshtastic
 {
 
@@ -55,7 +53,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed latitude\n");
 #endif
-            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.latitude_i;
         } else {
             return p.latitude_i;
@@ -68,7 +66,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed longitude\n");
 #endif
-            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.longitude_i;
         } else {
             return p.longitude_i;
@@ -81,27 +79,18 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed altitude\n");
 #endif
-            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.altitude;
         } else {
             return p.altitude;
         }
     }
 
-    uint32_t getDOP() const
-    {
-        return p.PDOP;
-    }
+    uint32_t getDOP() const { return p.PDOP; }
 
-    uint32_t getHeading() const
-    {
-        return p.ground_track;
-    }
+    uint32_t getHeading() const { return p.ground_track; }
 
-    uint32_t getNumSatellites() const
-    {
-        return p.sats_in_view;
-    }
+    uint32_t getNumSatellites() const { return p.sats_in_view; }
 
     bool matches(const GPSStatus *newStatus) const
     {
@@ -149,4 +138,4 @@ class GPSStatus : public Status
 
 } // namespace meshtastic
 
-extern meshtastic::GPSStatus *gpsStatus;
+extern meshtastic::GPSStatus *gpsStatus;

src/Power.cpp

@@ -24,11 +24,13 @@
 #include "nrfx_power.h"
 #endif
 
-#ifdef DEBUG_HEAP_MQTT
+#if defined(DEBUG_HEAP_MQTT) && !MESHTASTIC_EXCLUDE_MQTT
 #include "mqtt/MQTT.h"
 #include "target_specific.h"
+#if !MESTASTIC_EXCLUDE_WIFI
 #include <WiFi.h>
 #endif
+#endif
 
 #ifndef DELAY_FOREVER
 #define DELAY_FOREVER portMAX_DELAY
@@ -48,7 +50,7 @@ RTC_NOINIT_ATTR uint64_t RTC_reg_b;
 
 esp_adc_cal_characteristics_t *adc_characs = (esp_adc_cal_characteristics_t *)calloc(1, sizeof(esp_adc_cal_characteristics_t));
 #ifndef ADC_ATTENUATION
-static const adc_atten_t atten = ADC_ATTEN_DB_11;
+static const adc_atten_t atten = ADC_ATTEN_DB_12;
 #else
 static const adc_atten_t atten = ADC_ATTENUATION;
 #endif
@@ -67,7 +69,7 @@ static const uint8_t ext_chrg_detect_value = EXT_CHRG_DETECT_VALUE;
 #endif
 #endif
 
-#if HAS_TELEMETRY && !defined(ARCH_PORTDUINO)
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO)
 INA260Sensor ina260Sensor;
 INA219Sensor ina219Sensor;
 INA3221Sensor ina3221Sensor;
@@ -182,7 +184,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
     virtual uint16_t getBattVoltage() override
     {
 
-#if defined(HAS_TELEMETRY) && !defined(ARCH_PORTDUINO) && !defined(HAS_PMU)
+#if HAS_TELEMETRY && !defined(ARCH_PORTDUINO) && !defined(HAS_PMU) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         if (hasINA()) {
             LOG_DEBUG("Using INA on I2C addr 0x%x for device battery voltage\n", config.power.device_battery_ina_address);
             return getINAVoltage();
@@ -221,7 +223,17 @@ class AnalogBatteryLevel : public HasBatteryLevel
             raw = raw / BATTERY_SENSE_SAMPLES;
             scaled = operativeAdcMultiplier * ((1000 * AREF_VOLTAGE) / pow(2, BATTERY_SENSE_RESOLUTION_BITS)) * raw;
 #endif
-            last_read_value += (scaled - last_read_value) * 0.5; // Virtual LPF
+
+            if (!initial_read_done) {
+                // Flush the smoothing filter with an ADC reading, if the reading is plausibly correct
+                if (scaled > last_read_value)
+                    last_read_value = scaled;
+                initial_read_done = true;
+            } else {
+                // Already initialized - filter this reading
+                last_read_value += (scaled - last_read_value) * 0.5; // Virtual LPF
+            }
+
             // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u filtered=%u\n", BATTERY_PIN, raw, (uint32_t)(scaled), (uint32_t)
             // (last_read_value));
         }
@@ -355,10 +367,12 @@ class AnalogBatteryLevel : public HasBatteryLevel
     const float noBatVolt = (OCV[NUM_OCV_POINTS - 1] - 500) * NUM_CELLS;
     // Start value from minimum voltage for the filter to not start from 0
     // that could trigger some events.
+    // This value is over-written by the first ADC reading, it the voltage seems reasonable.
+    bool initial_read_done = false;
     float last_read_value = (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS);
     uint32_t last_read_time_ms = 0;
 
-#if defined(HAS_TELEMETRY) && !defined(ARCH_PORTDUINO)
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO)
     uint16_t getINAVoltage()
     {
         if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
@@ -498,12 +512,7 @@ void Power::shutdown()
 {
     LOG_INFO("Shutting down\n");
 
-#ifdef HAS_PMU
-    if (pmu_found == true) {
-        PMU->setChargingLedMode(XPOWERS_CHG_LED_OFF);
-        PMU->shutdown();
-    }
-#elif defined(ARCH_NRF52) || defined(ARCH_ESP32)
+#if defined(ARCH_NRF52) || defined(ARCH_ESP32)
 #ifdef PIN_LED1
     ledOff(PIN_LED1);
 #endif
@@ -546,14 +555,24 @@ void Power::readPowerStatus()
 #ifdef NRF_APM // Section of code detects USB power on the RAK4631 and updates the power states.  Takes 20 seconds or so to detect
                // changes.
 
+        static nrfx_power_usb_state_t prev_nrf_usb_state = (nrfx_power_usb_state_t)-1; // -1 so that state detected at boot
         nrfx_power_usb_state_t nrf_usb_state = nrfx_power_usbstatus_get();
 
-        if (nrf_usb_state == NRFX_POWER_USB_STATE_DISCONNECTED) {
-            powerFSM.trigger(EVENT_POWER_DISCONNECTED);
-            NRF_USB = OptFalse;
-        } else {
-            powerFSM.trigger(EVENT_POWER_CONNECTED);
-            NRF_USB = OptTrue;
+        // If state changed
+        if (nrf_usb_state != prev_nrf_usb_state) {
+            // If changed to DISCONNECTED
+            if (nrf_usb_state == NRFX_POWER_USB_STATE_DISCONNECTED) {
+                powerFSM.trigger(EVENT_POWER_DISCONNECTED);
+                NRF_USB = OptFalse;
+            }
+            // If changed to CONNECTED / READY
+            else {
+                powerFSM.trigger(EVENT_POWER_CONNECTED);
+                NRF_USB = OptTrue;
+            }
+
+            // Cache the current state
+            prev_nrf_usb_state = nrf_usb_state;
         }
 #endif
         // Notify any status instances that are observing us

src/PowerFSM.cpp

@@ -17,6 +17,10 @@
 #include "sleep.h"
 #include "target_specific.h"
 
+#ifndef SLEEP_TIME
+#define SLEEP_TIME 30
+#endif
+
 /// Should we behave as if we have AC power now?
 static bool isPowered()
 {
@@ -81,7 +85,7 @@ static void lsIdle()
         // If some other service would stall sleep, don't let sleep happen yet
         if (doPreflightSleep()) {
             // Briefly come out of sleep long enough to blink the led once every few seconds
-            uint32_t sleepTime = 30;
+            uint32_t sleepTime = SLEEP_TIME;
 
             setLed(false); // Never leave led on while in light sleep
             esp_sleep_source_t wakeCause2 = doLightSleep(sleepTime * 1000LL);
@@ -103,9 +107,7 @@ static void lsIdle()
                 break;
 
             default:
-                // We woke for some other reason (button press, device interrupt)
-                // uint64_t status = esp_sleep_get_ext1_wakeup_status();
-                LOG_INFO("wakeCause2 %d\n", wakeCause2);
+                // We woke for some other reason (button press, device IRQ interrupt)
 
 #ifdef BUTTON_PIN
                 bool pressed = !digitalRead(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
@@ -183,10 +185,12 @@ static void powerEnter()
         screen->setOn(true);
         setBluetoothEnable(true);
         // within enter() the function getState() returns the state we came from
-        if (strcmp(powerFSM.getState()->name, "BOOT") != 0 && strcmp(powerFSM.getState()->name, "POWER") != 0 &&
+
+        // Mothballed: print change of power-state to device screen
+        /* if (strcmp(powerFSM.getState()->name, "BOOT") != 0 && strcmp(powerFSM.getState()->name, "POWER") != 0 &&
             strcmp(powerFSM.getState()->name, "DARK") != 0) {
             screen->print("Powered...\n");
-        }
+        }*/
     }
 }
 
@@ -203,8 +207,10 @@ static void powerExit()
 {
     screen->setOn(true);
     setBluetoothEnable(true);
-    if (!isPowered())
-        screen->print("Unpowered...\n");
+
+    // Mothballed: print change of power-state to device screen
+    /*if (!isPowered())
+        screen->print("Unpowered...\n");*/
 }
 
 static void onEnter()
@@ -246,7 +252,6 @@ Fsm powerFSM(&stateBOOT);
 void PowerFSM_setup()
 {
     bool isRouter = (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ? 1 : 0);
-    bool isInfrastructureRole = isRouter || config.device.role == meshtastic_Config_DeviceConfig_Role_REPEATER;
     bool isTrackerOrSensor = config.device.role == meshtastic_Config_DeviceConfig_Role_TRACKER ||
                              config.device.role == meshtastic_Config_DeviceConfig_Role_TAK_TRACKER ||
                              config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;
@@ -343,15 +348,18 @@ void PowerFSM_setup()
 
     powerFSM.add_transition(&stateDARK, &stateDARK, EVENT_CONTACT_FROM_PHONE, NULL, "Contact from phone");
 
-    powerFSM.add_timed_transition(&stateON, &stateDARK,
-                                  Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
-                                  "Screen-on timeout");
-    powerFSM.add_timed_transition(&statePOWER, &stateDARK,
-                                  Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
-                                  "Screen-on timeout");
-    powerFSM.add_timed_transition(&stateDARK, &stateDARK,
-                                  Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
-                                  "Screen-on timeout");
+#ifdef USE_EINK
+    // Allow E-Ink devices to suppress the screensaver, if screen timeout set to 0
+    if (config.display.screen_on_secs > 0)
+#endif
+    {
+        powerFSM.add_timed_transition(&stateON, &stateDARK,
+                                      Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs),
+                                      NULL, "Screen-on timeout");
+        powerFSM.add_timed_transition(&statePOWER, &stateDARK,
+                                      Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs),
+                                      NULL, "Screen-on timeout");
+    }
 
 // We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
 #ifdef ARCH_ESP32
@@ -362,11 +370,24 @@ void PowerFSM_setup()
         powerFSM.add_timed_transition(&stateNB, &stateLS,
                                       Default::getConfiguredOrDefaultMs(config.power.min_wake_secs, default_min_wake_secs), NULL,
                                       "Min wake timeout");
+
+        // If ESP32 and using power-saving, timer mover from DARK to light-sleep
+        // Also serves purpose of the old DARK to DARK transition(?) See https://github.com/meshtastic/firmware/issues/3517
         powerFSM.add_timed_transition(
             &stateDARK, &stateLS,
             Default::getConfiguredOrDefaultMs(config.power.wait_bluetooth_secs, default_wait_bluetooth_secs), NULL,
             "Bluetooth timeout");
+    } else {
+        // If ESP32, but not using power-saving, check periodically if config has drifted out of stateDark
+        powerFSM.add_timed_transition(&stateDARK, &stateDARK,
+                                      Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs),
+                                      NULL, "Screen-on timeout");
     }
+#else
+    // If not ESP32, light-sleep not used. Check periodically if config has drifted out of stateDark
+    powerFSM.add_timed_transition(&stateDARK, &stateDARK,
+                                  Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
+                                  "Screen-on timeout");
 #endif
 
     powerFSM.run_machine(); // run one iteration of the state machine, so we run our on enter tasks for the initial DARK state

src/PowerStatus.h

@@ -59,9 +59,18 @@ class PowerStatus : public Status
     int getBatteryVoltageMv() const { return batteryVoltageMv; }
 
     /**
-     * Note: 0% battery means 'unknown/this board doesn't have a battery installed'
+     * Note: for boards with battery pin or PMU, 0% battery means 'unknown/this board doesn't have a battery installed'
      */
+#if defined(HAS_PMU) || defined(BATTERY_PIN)
     uint8_t getBatteryChargePercent() const { return getHasBattery() ? batteryChargePercent : 0; }
+#endif
+
+    /**
+     * Note: for boards without battery pin and PMU, 101% battery means 'the board is using external power'
+     */
+#if !defined(HAS_PMU) && !defined(BATTERY_PIN)
+    uint8_t getBatteryChargePercent() const { return getHasBattery() ? batteryChargePercent : 101; }
+#endif
 
     bool matches(const PowerStatus *newStatus) const
     {

src/RedirectablePrint.cpp

@@ -99,7 +99,7 @@ size_t RedirectablePrint::log(const char *logLevel, const char *format, ...)
 
         // If we are the first message on a report, include the header
         if (!isContinuationMessage) {
-            uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice);
+            uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // display local time on logfile
             if (rtc_sec > 0) {
                 long hms = rtc_sec % SEC_PER_DAY;
                 // hms += tz.tz_dsttime * SEC_PER_HOUR;
@@ -182,11 +182,11 @@ size_t RedirectablePrint::log(const char *logLevel, const char *format, ...)
 void RedirectablePrint::hexDump(const char *logLevel, unsigned char *buf, uint16_t len)
 {
     const char alphabet[17] = "0123456789abcdef";
-    log(logLevel, "   +------------------------------------------------+ +----------------+\n");
-    log(logLevel, "   |.0 .1 .2 .3 .4 .5 .6 .7 .8 .9 .a .b .c .d .e .f | |      ASCII     |\n");
+    log(logLevel, "    +------------------------------------------------+ +----------------+\n");
+    log(logLevel, "    |.0 .1 .2 .3 .4 .5 .6 .7 .8 .9 .a .b .c .d .e .f | |      ASCII     |\n");
     for (uint16_t i = 0; i < len; i += 16) {
         if (i % 128 == 0)
-            log(logLevel, "   +------------------------------------------------+ +----------------+\n");
+            log(logLevel, "    +------------------------------------------------+ +----------------+\n");
         char s[] = "|                                                | |                |\n";
         uint8_t ix = 1, iy = 52;
         for (uint8_t j = 0; j < 16; j++) {
@@ -208,7 +208,7 @@ void RedirectablePrint::hexDump(const char *logLevel, unsigned char *buf, uint16
         log(logLevel, ".");
         log(logLevel, s);
     }
-    log(logLevel, "   +------------------------------------------------+ +----------------+\n");
+    log(logLevel, "    +------------------------------------------------+ +----------------+\n");
 }
 
 std::string RedirectablePrint::mt_sprintf(const std::string fmt_str, ...)

src/SerialConsole.cpp

@@ -2,6 +2,7 @@
 #include "NodeDB.h"
 #include "PowerFSM.h"
 #include "configuration.h"
+#include "time.h"
 
 #ifdef RP2040_SLOW_CLOCK
 #define Port Serial2
@@ -50,7 +51,9 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con
         }
     }
 #endif
+#if !ARCH_PORTDUINO
     emitRebooted();
+#endif
 }
 
 int32_t SerialConsole::runOnce()

src/configuration.h

@@ -74,6 +74,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RTC_DATA_ATTR
 #endif
 
+// -----------------------------------------------------------------------------
+// Regulatory overrides for producing regional builds
+// -----------------------------------------------------------------------------
+
+// Define if region should override user saved region
+// #define LORA_REGIONCODE meshtastic_Config_LoRaConfig_RegionCode_SG_923
+
 // -----------------------------------------------------------------------------
 // Feature toggles
 // -----------------------------------------------------------------------------
@@ -119,8 +126,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SHTC3_ADDR 0x70
 #define LPS22HB_ADDR 0x5C
 #define LPS22HB_ADDR_ALT 0x5D
-#define SHT31_ADDR 0x44
+#define SHT31_4x_ADDR 0x44
 #define PMSA0031_ADDR 0x12
+#define AHT10_ADDR 0x38
+#define RCWL9620_ADDR 0x57
+#define VEML7700_ADDR 0x10
+#define TSL25911_ADDR 0x29
+#define OPT3001_ADDR 0x45
+#define OPT3001_ADDR_ALT 0x44
+#define MLX90632_ADDR 0x3A
+#define DFROBOT_LARK_ADDR 0x42
 
 // -----------------------------------------------------------------------------
 // ACCELEROMETER
@@ -128,6 +143,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MPU6050_ADDR 0x68
 #define LIS3DH_ADR 0x18
 #define BMA423_ADDR 0x19
+#define LSM6DS3_ADDR 0x6A
 
 // -----------------------------------------------------------------------------
 // LED
@@ -137,9 +153,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 // Security
 // -----------------------------------------------------------------------------
-
 #define ATECC608B_ADDR 0x35
 
+// -----------------------------------------------------------------------------
+// IO Expander
+// -----------------------------------------------------------------------------
+#define TCA9555_ADDR 0x26
+
 // -----------------------------------------------------------------------------
 // GPS
 // -----------------------------------------------------------------------------
@@ -161,19 +181,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
    also enable HAS_ option not specifically disabled by variant.h */
 #include "architecture.h"
 
+#ifndef DEFAULT_REBOOT_SECONDS
+#define DEFAULT_REBOOT_SECONDS 7
+#endif
+
+#ifndef DEFAULT_SHUTDOWN_SECONDS
+#define DEFAULT_SHUTDOWN_SECONDS 2
+#endif
+
 /* Step #3: mop up with disabled values for HAS_ options not handled by the above two */
 
-// -----------------------------------------------------------------------------
-// GPS
-// -----------------------------------------------------------------------------
-
-#ifndef GPS_BAUDRATE
-#define GPS_BAUDRATE 9600
-#endif
-#ifndef GPS_THREAD_INTERVAL
-#define GPS_THREAD_INTERVAL 100
-#endif
-
 #ifndef HAS_WIFI
 #define HAS_WIFI 0
 #endif
@@ -224,7 +241,21 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #error HW_VENDOR must be defined
 #endif
 
-// global switch to turn off all optional modules for a minimzed build
+// -----------------------------------------------------------------------------
+// Global switches to turn off features for a minimized build
+// -----------------------------------------------------------------------------
+
+// #define MESHTASTIC_MINIMIZE_BUILD 1
+#ifdef MESHTASTIC_MINIMIZE_BUILD
+#define MESHTASTIC_EXCLUDE_MODULES 1
+#define MESHTASTIC_EXCLUDE_WIFI 1
+#define MESHTASTIC_EXCLUDE_BLUETOOTH 1
+#define MESHTASTIC_EXCLUDE_GPS 1
+#define MESHTASTIC_EXCLUDE_SCREEN 1
+#define MESHTASTIC_EXCLUDE_MQTT 1
+#endif
+
+// Turn off all optional modules
 #ifdef MESHTASTIC_EXCLUDE_MODULES
 #define MESHTASTIC_EXCLUDE_AUDIO 1
 #define MESHTASTIC_EXCLUDE_DETECTIONSENSOR 1
@@ -243,3 +274,30 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MESHTASTIC_EXCLUDE_INPUTBROKER 1
 #define MESHTASTIC_EXCLUDE_SERIAL 1
 #endif
+
+// // Turn off wifi even if HW supports wifi (webserver relies on wifi and is also disabled)
+#ifdef MESHTASTIC_EXCLUDE_WIFI
+#define MESHTASTIC_EXCLUDE_WEBSERVER 1
+#undef HAS_WIFI
+#define HAS_WIFI 0
+#endif
+
+// // Turn off Bluetooth
+#ifdef MESHTASTIC_EXCLUDE_BLUETOOTH
+#undef HAS_BLUETOOTH
+#define HAS_BLUETOOTH 0
+#endif
+
+// // Turn off GPS
+#ifdef MESHTASTIC_EXCLUDE_GPS
+#undef HAS_GPS
+#define HAS_GPS 0
+#undef MESHTASTIC_EXCLUDE_RANGETEST
+#define MESHTASTIC_EXCLUDE_RANGETEST 1
+#endif
+
+// Turn off Screen
+#ifdef MESHTASTIC_EXCLUDE_SCREEN
+#undef HAS_SCREEN
+#define HAS_SCREEN 0
+#endif

src/detect/LoRaRadioType.h

@@ -0,0 +1,16 @@
+#pragma once
+
+enum LoRaRadioType {
+    NO_RADIO,
+    STM32WLx_RADIO,
+    SIM_RADIO,
+    RF95_RADIO,
+    SX1262_RADIO,
+    SX1268_RADIO,
+    LLCC68_RADIO,
+    SX1280_RADIO,
+    LR1110_RADIO,
+    LR1120_RADIO
+};
+
+extern LoRaRadioType radioType;

src/detect/ScanI2C.cpp

@@ -36,8 +36,8 @@ ScanI2C::FoundDevice ScanI2C::firstKeyboard() const
 
 ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const
 {
-    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423};
-    return firstOfOrNONE(3, types);
+    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3};
+    return firstOfOrNONE(4, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::find(ScanI2C::DeviceType) const

src/detect/ScanI2C.h

@@ -29,6 +29,7 @@ class ScanI2C
         INA3221,
         MCP9808,
         SHT31,
+        SHT4X,
         SHTC3,
         LPS22HB,
         QMC6310,
@@ -38,9 +39,17 @@ class ScanI2C
         MPU6050,
         LIS3DH,
         BMA423,
-#ifdef HAS_NCP5623
+        BQ24295,
+        LSM6DS3,
+        TCA9555,
+        VEML7700,
+        RCWL9620,
         NCP5623,
-#endif
+        TSL2591,
+        OPT3001,
+        MLX90632,
+        AHT10,
+        DFROBOT_LARK,
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -256,7 +256,12 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
                     type = BMP_280;
                 }
                 break;
-
+#ifndef HAS_NCP5623
+            case AHT10_ADDR:
+                LOG_INFO("AHT10 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                type = AHT10;
+                break;
+#endif
             case INA_ADDR:
             case INA_ADDR_ALTERNATE:
             case INA_ADDR_WAVESHARE_UPS:
@@ -271,8 +276,15 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
                 }
                 break;
             case INA3221_ADDR:
-                LOG_INFO("INA3221 sensor found at address 0x%x\n", (uint8_t)addr.address);
-                type = INA3221;
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2);
+                LOG_DEBUG("Register MFG_UID: 0x%x\n", registerValue);
+                if (registerValue == 0x5449) {
+                    LOG_INFO("INA3221 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                    type = INA3221;
+                } else {
+                    LOG_INFO("DFRobot Lark weather station found at address 0x%x\n", (uint8_t)addr.address);
+                    type = DFROBOT_LARK;
+                }
                 break;
             case MCP9808_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x07), 2);
@@ -286,19 +298,57 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
 
                 break;
 
-                SCAN_SIMPLE_CASE(SHT31_ADDR, SHT31, "SHT31 sensor found\n")
+            case SHT31_4x_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2);
+                if (registerValue == 0x11a2) {
+                    type = SHT4X;
+                    LOG_INFO("SHT4X sensor found\n");
+                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
+                    type = OPT3001;
+                    LOG_INFO("OPT3001 light sensor found\n");
+                } else {
+                    type = SHT31;
+                    LOG_INFO("SHT31 sensor found\n");
+                }
+
+                break;
+
                 SCAN_SIMPLE_CASE(SHTC3_ADDR, SHTC3, "SHTC3 sensor found\n")
+                SCAN_SIMPLE_CASE(RCWL9620_ADDR, RCWL9620, "RCWL9620 sensor found\n")
 
             case LPS22HB_ADDR_ALT:
                 SCAN_SIMPLE_CASE(LPS22HB_ADDR, LPS22HB, "LPS22HB sensor found\n")
 
                 SCAN_SIMPLE_CASE(QMC6310_ADDR, QMC6310, "QMC6310 Highrate 3-Axis magnetic sensor found\n")
-                SCAN_SIMPLE_CASE(QMI8658_ADDR, QMI8658, "QMI8658 Highrate 6-Axis inertial measurement sensor found\n")
+
+            case QMI8658_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0A), 1); // get ID
+                if (registerValue == 0xC0) {
+                    type = BQ24295;
+                    LOG_INFO("BQ24295 PMU found\n");
+                    break;
+                }
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 1); // get ID
+                if (registerValue == 0x6A) {
+                    type = LSM6DS3;
+                    LOG_INFO("LSM6DS3 accelerometer found at address 0x%x\n", (uint8_t)addr.address);
+                } else {
+                    type = QMI8658;
+                    LOG_INFO("QMI8658 Highrate 6-Axis inertial measurement sensor found\n");
+                }
+                break;
+
                 SCAN_SIMPLE_CASE(QMC5883L_ADDR, QMC5883L, "QMC5883L Highrate 3-Axis magnetic sensor found\n")
 
                 SCAN_SIMPLE_CASE(PMSA0031_ADDR, PMSA0031, "PMSA0031 air quality sensor found\n")
                 SCAN_SIMPLE_CASE(MPU6050_ADDR, MPU6050, "MPU6050 accelerometer found\n");
                 SCAN_SIMPLE_CASE(BMA423_ADDR, BMA423, "BMA423 accelerometer found\n");
+                SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3 accelerometer found at address 0x%x\n", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555 I2C expander found\n");
+                SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700 light sensor found\n");
+                SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591 light sensor found\n");
+                SCAN_SIMPLE_CASE(OPT3001_ADDR, OPT3001, "OPT3001 light sensor found\n");
+                SCAN_SIMPLE_CASE(MLX90632_ADDR, MLX90632, "MLX90632 IR temp sensor found\n");
 
             default:
                 LOG_INFO("Device found at address 0x%x was not able to be enumerated\n", addr.address);

src/gps/GPS.cpp

@@ -1,10 +1,14 @@
-#include "GPS.h"
+#include "configuration.h"
+#if !MESHTASTIC_EXCLUDE_GPS
 #include "Default.h"
+#include "GPS.h"
 #include "NodeDB.h"
 #include "RTC.h"
-#include "configuration.h"
+
 #include "main.h" // pmu_found
 #include "sleep.h"
+
+#include "cas.h"
 #include "ubx.h"
 
 #ifdef ARCH_PORTDUINO
@@ -17,6 +21,13 @@
 #define GPS_RESET_MODE HIGH
 #endif
 
+// How many minutes of sleep make it worthwhile to power-off the GPS
+// Shorter than this, and GPS will only enter standby
+// Affected by lock-time, and config.position.gps_update_interval
+#ifndef GPS_STANDBY_THRESHOLD_MINUTES
+#define GPS_STANDBY_THRESHOLD_MINUTES 15
+#endif
+
 #if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO)
 HardwareSerial *GPS::_serial_gps = &Serial1;
 #else
@@ -49,6 +60,28 @@ void GPS::UBXChecksum(uint8_t *message, size_t length)
     message[length - 1] = CK_B;
 }
 
+// Calculate the checksum for a CAS packet
+void GPS::CASChecksum(uint8_t *message, size_t length)
+{
+    uint32_t cksum = ((uint32_t)message[5] << 24); // Message ID
+    cksum += ((uint32_t)message[4]) << 16;         // Class
+    cksum += message[2];                           // Payload Len
+
+    // Iterate over the payload as a series of uint32_t's and
+    // accumulate the cksum
+    uint32_t const *payload = (uint32_t *)(message + 6);
+    for (size_t i = 0; i < (length - 10) / 4; i++) {
+        uint32_t pl = payload[i];
+        cksum += pl;
+    }
+
+    // Place the checksum values in the message
+    message[length - 4] = (cksum & 0xFF);
+    message[length - 3] = (cksum & (0xFF << 8)) >> 8;
+    message[length - 2] = (cksum & (0xFF << 16)) >> 16;
+    message[length - 1] = (cksum & (0xFF << 24)) >> 24;
+}
+
 // Function to create a ublox packet for editing in memory
 uint8_t GPS::makeUBXPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg)
 {
@@ -70,6 +103,41 @@ uint8_t GPS::makeUBXPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_siz
     return (payload_size + 8);
 }
 
+// Function to create a CAS packet for editing in memory
+uint8_t GPS::makeCASPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg)
+{
+    // General CAS structure
+    //        | H1   | H2   | payload_len | cls  | msg  | Payload       ...   | Checksum                  |
+    // Size:  | 1    | 1    | 2           | 1    | 1    | payload_len         | 4                         |
+    // Pos:   | 0    | 1    | 2    | 3    | 4    | 5    | 6    | 7      ...   | 6 + payload_len ...       |
+    //        |------|------|-------------|------|------|------|--------------|---------------------------|
+    //        | 0xBA | 0xCE | 0xXX | 0xXX | 0xXX | 0xXX | 0xXX | 0xXX   ...   | 0xXX | 0xXX | 0xXX | 0xXX |
+
+    // Construct the CAS packet
+    UBXscratch[0] = 0xBA;         // header 1 (0xBA)
+    UBXscratch[1] = 0xCE;         // header 2 (0xCE)
+    UBXscratch[2] = payload_size; // length 1
+    UBXscratch[3] = 0;            // length 2
+    UBXscratch[4] = class_id;     // class
+    UBXscratch[5] = msg_id;       // id
+
+    UBXscratch[6 + payload_size] = 0x00; // Checksum
+    UBXscratch[7 + payload_size] = 0x00;
+    UBXscratch[8 + payload_size] = 0x00;
+    UBXscratch[9 + payload_size] = 0x00;
+
+    for (int i = 0; i < payload_size; i++) {
+        UBXscratch[6 + i] = pgm_read_byte(&msg[i]);
+    }
+    CASChecksum(UBXscratch, (payload_size + 10));
+
+#if defined(GPS_DEBUG) && defined(DEBUG_PORT)
+    LOG_DEBUG("Constructed CAS packet: \n");
+    DEBUG_PORT.hexDump(MESHTASTIC_LOG_LEVEL_DEBUG, UBXscratch, payload_size + 10);
+#endif
+    return (payload_size + 10);
+}
+
 GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
 {
     uint8_t buffer[768] = {0};
@@ -79,6 +147,7 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
     while (millis() < startTimeout) {
         if (_serial_gps->available()) {
             b = _serial_gps->read();
+
 #ifdef GPS_DEBUG
             LOG_DEBUG("%02X", (char *)buffer);
 #endif
@@ -102,6 +171,67 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
     return GNSS_RESPONSE_NONE;
 }
 
+GPS_RESPONSE GPS::getACKCas(uint8_t class_id, uint8_t msg_id, uint32_t waitMillis)
+{
+    uint32_t startTime = millis();
+    uint8_t buffer[CAS_ACK_NACK_MSG_SIZE] = {0};
+    uint8_t bufferPos = 0;
+
+    // CAS-ACK-(N)ACK structure
+    //         | H1   | H2   | Payload Len | cls  | msg  | Payload                   | Checksum (4)              |
+    //         |      |      |             |      |      | Cls  | Msg  | Reserved    |                           |
+    //         |------|------|-------------|------|------|------|------|-------------|---------------------------|
+    // ACK-NACK| 0xBA | 0xCE | 0x04 | 0x00 | 0x05 | 0x00 | 0xXX | 0xXX | 0x00 | 0x00 | 0xXX | 0xXX | 0xXX | 0xXX |
+    // ACK-ACK | 0xBA | 0xCE | 0x04 | 0x00 | 0x05 | 0x01 | 0xXX | 0xXX | 0x00 | 0x00 | 0xXX | 0xXX | 0xXX | 0xXX |
+
+    while (millis() - startTime < waitMillis) {
+        if (_serial_gps->available()) {
+            buffer[bufferPos++] = _serial_gps->read();
+
+            // keep looking at the first two bytes of buffer until
+            // we have found the CAS frame header (0xBA, 0xCE), if not
+            // keep reading bytes until we find a frame header or we run
+            // out of time.
+            if ((bufferPos == 2) && !(buffer[0] == 0xBA && buffer[1] == 0xCE)) {
+                buffer[0] = buffer[1];
+                buffer[1] = 0;
+                bufferPos = 1;
+            }
+        }
+
+        // we have read all the bytes required for the Ack/Nack (14-bytes)
+        // and we must have found a frame to get this far
+        if (bufferPos == sizeof(buffer) - 1) {
+            uint8_t msg_cls = buffer[4];     // message class should be 0x05
+            uint8_t msg_msg_id = buffer[5];  // message id should be 0x00 or 0x01
+            uint8_t payload_cls = buffer[6]; // payload class id
+            uint8_t payload_msg = buffer[7]; // payload message id
+
+            // Check for an ACK-ACK for the specified class and message id
+            if ((msg_cls == 0x05) && (msg_msg_id == 0x01) && payload_cls == class_id && payload_msg == msg_id) {
+#ifdef GPS_DEBUG
+                LOG_INFO("Got ACK for class %02X message %02X in %d millis.\n", class_id, msg_id, millis() - startTime);
+#endif
+                return GNSS_RESPONSE_OK;
+            }
+
+            // Check for an ACK-NACK for the specified class and message id
+            if ((msg_cls == 0x05) && (msg_msg_id == 0x00) && payload_cls == class_id && payload_msg == msg_id) {
+#ifdef GPS_DEBUG
+                LOG_WARN("Got NACK for class %02X message %02X in %d millis.\n", class_id, msg_id, millis() - startTime);
+#endif
+                return GNSS_RESPONSE_NAK;
+            }
+
+            // This isn't the frame we are looking for, clear the buffer
+            // and try again until we run out of time.
+            memset(buffer, 0x0, sizeof(buffer));
+            bufferPos = 0;
+        }
+    }
+    return GNSS_RESPONSE_NONE;
+}
+
 GPS_RESPONSE GPS::getACK(uint8_t class_id, uint8_t msg_id, uint32_t waitMillis)
 {
     uint8_t b;
@@ -311,6 +441,33 @@ bool GPS::setup()
             // Switch to Fitness Mode, for running and walking purpose with low speed (<5 m/s)
             _serial_gps->write("$PMTK886,1*29\r\n");
             delay(250);
+        } else if (gnssModel == GNSS_MODEL_ATGM336H) {
+            // Set the intial configuration of the device - these _should_ work for most AT6558 devices
+            msglen = makeCASPacket(0x06, 0x07, sizeof(_message_CAS_CFG_NAVX_CONF), _message_CAS_CFG_NAVX_CONF);
+            _serial_gps->write(UBXscratch, msglen);
+            if (getACKCas(0x06, 0x07, 250) != GNSS_RESPONSE_OK) {
+                LOG_WARN("ATGM336H - Could not set Configuration");
+            }
+
+            // Set the update frequence to 1Hz
+            msglen = makeCASPacket(0x06, 0x04, sizeof(_message_CAS_CFG_RATE_1HZ), _message_CAS_CFG_RATE_1HZ);
+            _serial_gps->write(UBXscratch, msglen);
+            if (getACKCas(0x06, 0x04, 250) != GNSS_RESPONSE_OK) {
+                LOG_WARN("ATGM336H - Could not set Update Frequency");
+            }
+
+            // Set the NEMA output messages
+            // Ask for only RMC and GGA
+            uint8_t fields[] = {CAS_NEMA_RMC, CAS_NEMA_GGA};
+            for (unsigned int i = 0; i < sizeof(fields); i++) {
+                // Construct a CAS-CFG-MSG packet
+                uint8_t cas_cfg_msg_packet[] = {0x4e, fields[i], 0x01, 0x00};
+                msglen = makeCASPacket(0x06, 0x01, sizeof(cas_cfg_msg_packet), cas_cfg_msg_packet);
+                _serial_gps->write(UBXscratch, msglen);
+                if (getACKCas(0x06, 0x01, 250) != GNSS_RESPONSE_OK) {
+                    LOG_WARN("ATGM336H - Could not enable NMEA MSG: %d\n", fields[i]);
+                }
+            }
         } else if (gnssModel == GNSS_MODEL_UC6580) {
             // The Unicore UC6580 can use a lot of sat systems, enable it to
             // use GPS L1 & L5 + BDS B1I & B2a + GLONASS L1 + GALILEO E1 & E5a + SBAS
@@ -322,6 +479,9 @@ bool GPS::setup()
             // Turn off GSV messages, we don't really care about which and where the sats are, maybe someday.
             _serial_gps->write("$CFGMSG,0,3,0\r\n");
             delay(250);
+            // Turn off GSA messages, TinyGPS++ doesn't use this message.
+            _serial_gps->write("$CFGMSG,0,2,0\r\n");
+            delay(250);
             // Turn off NOTICE __TXT messages, these may provide Unicore some info but we don't care.
             _serial_gps->write("$CFGMSG,6,0,0\r\n");
             delay(250);
@@ -614,7 +774,16 @@ GPS::~GPS()
 
 void GPS::setGPSPower(bool on, bool standbyOnly, uint32_t sleepTime)
 {
-    LOG_INFO("Setting GPS power=%d\n", on);
+    // Record the current powerState
+    if (on)
+        powerState = GPS_AWAKE;
+    else if (!on && standbyOnly)
+        powerState = GPS_STANDBY;
+    else
+        powerState = GPS_OFF;
+
+    LOG_DEBUG("GPS::powerState=%d\n", powerState);
+
     if (on) {
         clearBuffer(); // drop any old data waiting in the buffer before re-enabling
         if (en_gpio)
@@ -708,17 +877,21 @@ void GPS::setConnected()
  *
  * calls sleep/wake
  */
-void GPS::setAwake(bool on)
+void GPS::setAwake(bool wantAwake)
 {
-    if (isAwake != on) {
-        LOG_DEBUG("WANT GPS=%d\n", on);
-        isAwake = on;
-        if (!enabled) { // short circuit if the user has disabled GPS
-            setGPSPower(false, false, 0);
-            return;
-        }
 
-        if (on) {
+    // If user has disabled GPS, make sure it is off, not just in standby
+    if (!wantAwake && !enabled && powerState != GPS_OFF) {
+        setGPSPower(false, false, 0);
+        return;
+    }
+
+    // If GPS power state needs to change
+    if ((wantAwake && powerState != GPS_AWAKE) || (!wantAwake && powerState == GPS_AWAKE)) {
+        LOG_DEBUG("WANT GPS=%d\n", wantAwake);
+
+        // Calculate how long it takes to get a GPS lock
+        if (wantAwake) {
             lastWakeStartMsec = millis();
         } else {
             lastSleepStartMsec = millis();
@@ -730,23 +903,31 @@ void GPS::setAwake(bool on)
             GPSCycles++;
             LOG_DEBUG("GPS Lock took %d, average %d\n", (lastSleepStartMsec - lastWakeStartMsec) / 1000, averageLockTime / 1000);
         }
-        if ((int32_t)getSleepTime() - averageLockTime >
-            15 * 60 * 1000) { // 15 minutes is probably long enough to make a complete poweroff worth it.
-            setGPSPower(on, false, getSleepTime() - averageLockTime);
+
+        // If long interval between updates: power off between updates
+        if ((int32_t)getSleepTime() - averageLockTime > GPS_STANDBY_THRESHOLD_MINUTES * MS_IN_MINUTE) {
+            setGPSPower(wantAwake, false, getSleepTime() - averageLockTime);
             return;
-        } else if ((int32_t)getSleepTime() - averageLockTime > 10000) { // 10 seconds is enough for standby
+        }
+
+        // If waking frequently: standby only. Would use more power trying to reacquire lock each time
+        else if ((int32_t)getSleepTime() - averageLockTime > 10000) { // 10 seconds is enough for standby
 #ifdef GPS_UC6580
-            setGPSPower(on, false, getSleepTime() - averageLockTime);
+            setGPSPower(wantAwake, false, getSleepTime() - averageLockTime);
 #else
-            setGPSPower(on, true, getSleepTime() - averageLockTime);
+            setGPSPower(wantAwake, true, getSleepTime() - averageLockTime);
 #endif
             return;
         }
+
+        // Gradually recover from an abnormally long "time to get lock"
         if (averageLockTime > 20000) {
             averageLockTime -= 1000; // eventually want to sleep again.
         }
-        if (on)
-            setGPSPower(true, true, 0); // make sure we don't have a fallthrough where GPS is stuck off
+
+        // Make sure we don't have a fallthrough where GPS is stuck off
+        if (wantAwake)
+            setGPSPower(true, true, 0);
     }
 }
 
@@ -759,7 +940,7 @@ uint32_t GPS::getWakeTime() const
     if (t == UINT32_MAX)
         return t; // already maxint
 
-    return Default::Default::getConfiguredOrDefaultMs(t, default_broadcast_interval_secs);
+    return Default::getConfiguredOrDefaultMs(t, default_broadcast_interval_secs);
 }
 
 /** Get how long we should sleep between aqusition attempts in msecs
@@ -775,7 +956,7 @@ uint32_t GPS::getSleepTime() const
     if (t == UINT32_MAX)
         return t; // already maxint
 
-    return t * 1000;
+    return Default::getConfiguredOrDefaultMs(t, default_gps_update_interval);
 }
 
 void GPS::publishUpdate()
@@ -815,7 +996,7 @@ int32_t GPS::runOnce()
             LOG_WARN("GPS FactoryReset requested\n");
             if (gps->factoryReset()) { // If we don't succeed try again next time
                 devicestate.did_gps_reset = true;
-                nodeDB.saveToDisk(SEGMENT_DEVICESTATE);
+                nodeDB->saveToDisk(SEGMENT_DEVICESTATE);
             }
         }
         GPSInitFinished = true;
@@ -835,7 +1016,7 @@ int32_t GPS::runOnce()
             if (devicestate.did_gps_reset && (millis() - lastWakeStartMsec > 60000) && !hasFlow()) {
                 LOG_DEBUG("GPS is not communicating, trying factory reset on next bootup.\n");
                 devicestate.did_gps_reset = false;
-                nodeDB.saveDeviceStateToDisk();
+                nodeDB->saveDeviceStateToDisk();
                 return disable(); // Stop the GPS thread as it can do nothing useful until next reboot.
             }
         }
@@ -852,14 +1033,14 @@ int32_t GPS::runOnce()
     uint32_t timeAsleep = now - lastSleepStartMsec;
 
     auto sleepTime = getSleepTime();
-    if (!isAwake && (sleepTime != UINT32_MAX) &&
+    if (powerState != GPS_AWAKE && (sleepTime != UINT32_MAX) &&
         ((timeAsleep > sleepTime) || (isInPowersave && timeAsleep > (sleepTime - averageLockTime)))) {
         // We now want to be awake - so wake up the GPS
         setAwake(true);
     }
 
     // While we are awake
-    if (isAwake) {
+    if (powerState == GPS_AWAKE) {
         // LOG_DEBUG("looking for location\n");
         // If we've already set time from the GPS, no need to ask the GPS
         bool gotTime = (getRTCQuality() >= RTCQualityGPS);
@@ -905,7 +1086,7 @@ int32_t GPS::runOnce()
 
     // 9600bps is approx 1 byte per msec, so considering our buffer size we never need to wake more often than 200ms
     // if not awake we can run super infrquently (once every 5 secs?) to see if we need to wake.
-    return isAwake ? GPS_THREAD_INTERVAL : 5000;
+    return (powerState == GPS_AWAKE) ? GPS_THREAD_INTERVAL : 5000;
 }
 
 // clear the GPS rx buffer as quickly as possible
@@ -946,10 +1127,18 @@ GnssModel_t GPS::probe(int serialSpeed)
     uint8_t buffer[768] = {0};
     delay(100);
 
-    // Close all NMEA sentences , Only valid for L76K MTK platform
+    // Close all NMEA sentences, valid for L76K, ATGM336H (and likely other AT6558 devices)
     _serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
     delay(20);
 
+    // Get version information
+    clearBuffer();
+    _serial_gps->write("$PCAS06,1*1A\r\n");
+    if (getACK("$GPTXT,01,01,02,HW=ATGM336H", 500) == GNSS_RESPONSE_OK) {
+        LOG_INFO("ATGM336H GNSS init succeeded, using ATGM336H Module\n");
+        return GNSS_MODEL_ATGM336H;
+    }
+
     // Get version information
     clearBuffer();
     _serial_gps->write("$PCAS06,0*1B\r\n");
@@ -1214,6 +1403,11 @@ bool GPS::factoryReset()
         LOG_INFO("GNSS Factory Reset via PCAS10,3\n");
         _serial_gps->write("$PCAS10,3*1F\r\n");
         delay(100);
+    } else if (gnssModel == GNSS_MODEL_ATGM336H) {
+        LOG_INFO("Factory Reset via CAS-CFG-RST\n");
+        uint8_t msglen = makeCASPacket(0x06, 0x02, sizeof(_message_CAS_CFG_RST_FACTORY), _message_CAS_CFG_RST_FACTORY);
+        _serial_gps->write(UBXscratch, msglen);
+        delay(100);
     } else {
         // fire this for good measure, if we have an L76B - won't harm other devices.
         _serial_gps->write("$PMTK104*37\r\n");
@@ -1278,7 +1472,7 @@ bool GPS::lookForLocation()
 
 #ifndef TINYGPS_OPTION_NO_STATISTICS
     if (reader.failedChecksum() > lastChecksumFailCount) {
-        LOG_WARN("Warning, %u new GPS checksum failures, for a total of %u.\n", reader.failedChecksum() - lastChecksumFailCount,
+        LOG_WARN("%u new GPS checksum failures, for a total of %u.\n", reader.failedChecksum() - lastChecksumFailCount,
                  reader.failedChecksum());
         lastChecksumFailCount = reader.failedChecksum();
     }
@@ -1304,7 +1498,7 @@ bool GPS::lookForLocation()
 #endif // GPS_EXTRAVERBOSE
 
     // Is this a new point or are we re-reading the previous one?
-    if (!reader.location.isUpdated())
+    if (!reader.location.isUpdated() && !reader.altitude.isUpdated())
         return false;
 
     // check if a complete GPS solution set is available for reading
@@ -1377,7 +1571,7 @@ bool GPS::lookForLocation()
     t.tm_mon = reader.date.month() - 1;
     t.tm_year = reader.date.year() - 1900;
     t.tm_isdst = false;
-    p.timestamp = mktime(&t);
+    p.timestamp = gm_mktime(&t);
 
     // Nice to have, if available
     if (reader.satellites.isUpdated()) {
@@ -1421,11 +1615,11 @@ bool GPS::hasFlow()
 
 bool GPS::whileIdle()
 {
-    int charsInBuf = 0;
+    unsigned int charsInBuf = 0;
     bool isValid = false;
-    if (!isAwake) {
+    if (powerState != GPS_AWAKE) {
         clearBuffer();
-        return isAwake;
+        return (powerState == GPS_AWAKE);
     }
 #ifdef SERIAL_BUFFER_SIZE
     if (_serial_gps->available() >= SERIAL_BUFFER_SIZE - 1) {
@@ -1481,4 +1675,5 @@ void GPS::toggleGpsMode()
         LOG_DEBUG("Flag set to true to restore power. GpsMode: ENABLED\n");
         enable();
     }
-}
+}
+#endif // Exclude GPS

src/gps/GPS.h

@@ -1,4 +1,6 @@
 #pragma once
+#include "configuration.h"
+#if !MESHTASTIC_EXCLUDE_GPS
 
 #include "GPSStatus.h"
 #include "Observer.h"
@@ -20,7 +22,14 @@ struct uBloxGnssModelInfo {
     char extension[10][30];
 };
 
-typedef enum { GNSS_MODEL_MTK, GNSS_MODEL_UBLOX, GNSS_MODEL_UC6580, GNSS_MODEL_UNKNOWN, GNSS_MODEL_MTK_L76B } GnssModel_t;
+typedef enum {
+    GNSS_MODEL_ATGM336H,
+    GNSS_MODEL_MTK,
+    GNSS_MODEL_UBLOX,
+    GNSS_MODEL_UC6580,
+    GNSS_MODEL_UNKNOWN,
+    GNSS_MODEL_MTK_L76B
+} GnssModel_t;
 
 typedef enum {
     GNSS_RESPONSE_NONE,
@@ -29,6 +38,12 @@ typedef enum {
     GNSS_RESPONSE_OK,
 } GPS_RESPONSE;
 
+enum GPSPowerState : uint8_t {
+    GPS_OFF = 0,
+    GPS_AWAKE = 1,
+    GPS_STANDBY = 2,
+};
+
 // Generate a string representation of DOP
 const char *getDOPString(uint32_t dop);
 
@@ -69,8 +84,6 @@ class GPS : private concurrency::OSThread
      */
     bool hasValidLocation = false; // default to false, until we complete our first read
 
-    bool isAwake = false; // true if we want a location right now
-
     bool isInPowersave = false;
 
     bool shouldPublish = false; // If we've changed GPS state, this will force a publish the next loop()
@@ -80,6 +93,8 @@ class GPS : private concurrency::OSThread
     bool GPSInitFinished = false; // Init thread finished?
     bool GPSInitStarted = false;  // Init thread finished?
 
+    GPSPowerState powerState = GPS_OFF; // GPS_AWAKE if we want a location right now
+
     uint8_t numSatellites = 0;
 
     CallbackObserver<GPS, void *> notifyDeepSleepObserver = CallbackObserver<GPS, void *>(this, &GPS::prepareDeepSleep);
@@ -131,6 +146,11 @@ class GPS : private concurrency::OSThread
     static const uint8_t _message_VALSET_DISABLE_SBAS_RAM[];
     static const uint8_t _message_VALSET_DISABLE_SBAS_BBR[];
 
+    // CASIC commands for ATGM336H
+    static const uint8_t _message_CAS_CFG_RST_FACTORY[];
+    static const uint8_t _message_CAS_CFG_NAVX_CONF[];
+    static const uint8_t _message_CAS_CFG_RATE_1HZ[];
+
     meshtastic_Position p = meshtastic_Position_init_default;
 
     GPS() : concurrency::OSThread("GPS") {}
@@ -172,6 +192,7 @@ class GPS : private concurrency::OSThread
 
     // Create a ublox packet for editing in memory
     uint8_t makeUBXPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg);
+    uint8_t makeCASPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg);
 
     // scratch space for creating ublox packets
     uint8_t UBXscratch[250] = {0};
@@ -182,6 +203,8 @@ class GPS : private concurrency::OSThread
     GPS_RESPONSE getACK(uint8_t c, uint8_t i, uint32_t waitMillis);
     GPS_RESPONSE getACK(const char *message, uint32_t waitMillis);
 
+    GPS_RESPONSE getACKCas(uint8_t class_id, uint8_t msg_id, uint32_t waitMillis);
+
     /**
      * Switch the GPS into a mode where we are actively looking for a lock, or alternatively switch GPS into a low power mode
      *
@@ -241,6 +264,7 @@ class GPS : private concurrency::OSThread
 
     // Calculate checksum
     void UBXChecksum(uint8_t *message, size_t length);
+    void CASChecksum(uint8_t *message, size_t length);
 
     /** Get how long we should stay looking for each aquisition
      */
@@ -268,4 +292,5 @@ class GPS : private concurrency::OSThread
     GnssModel_t gnssModel = GNSS_MODEL_UNKNOWN;
 };
 
-extern GPS *gps;
+extern GPS *gps;
+#endif // Exclude GPS

src/gps/GeoCoord.cpp

@@ -486,3 +486,91 @@ std::shared_ptr<GeoCoord> GeoCoord::pointAtDistance(double bearing, double range
 
     return std::make_shared<GeoCoord>(double(lat), double(lon), this->getAltitude());
 }
+
+/**
+ * Convert bearing to degrees
+ * @param bearing
+ * The bearing in string format
+ * @return Bearing in degrees
+ */
+uint GeoCoord::bearingToDegrees(const char *bearing)
+{
+    if (strcmp(bearing, "N") == 0)
+        return 0;
+    else if (strcmp(bearing, "NNE") == 0)
+        return 22;
+    else if (strcmp(bearing, "NE") == 0)
+        return 45;
+    else if (strcmp(bearing, "ENE") == 0)
+        return 67;
+    else if (strcmp(bearing, "E") == 0)
+        return 90;
+    else if (strcmp(bearing, "ESE") == 0)
+        return 112;
+    else if (strcmp(bearing, "SE") == 0)
+        return 135;
+    else if (strcmp(bearing, "SSE") == 0)
+        return 157;
+    else if (strcmp(bearing, "S") == 0)
+        return 180;
+    else if (strcmp(bearing, "SSW") == 0)
+        return 202;
+    else if (strcmp(bearing, "SW") == 0)
+        return 225;
+    else if (strcmp(bearing, "WSW") == 0)
+        return 247;
+    else if (strcmp(bearing, "W") == 0)
+        return 270;
+    else if (strcmp(bearing, "WNW") == 0)
+        return 292;
+    else if (strcmp(bearing, "NW") == 0)
+        return 315;
+    else if (strcmp(bearing, "NNW") == 0)
+        return 337;
+    else
+        return 0;
+}
+
+/**
+ * Convert bearing to string
+ * @param degrees
+ * The bearing in degrees
+ * @return Bearing in string format
+ */
+const char *GeoCoord::degreesToBearing(uint degrees)
+{
+    if (degrees >= 348 || degrees < 11)
+        return "N";
+    else if (degrees >= 11 && degrees < 34)
+        return "NNE";
+    else if (degrees >= 34 && degrees < 56)
+        return "NE";
+    else if (degrees >= 56 && degrees < 79)
+        return "ENE";
+    else if (degrees >= 79 && degrees < 101)
+        return "E";
+    else if (degrees >= 101 && degrees < 124)
+        return "ESE";
+    else if (degrees >= 124 && degrees < 146)
+        return "SE";
+    else if (degrees >= 146 && degrees < 169)
+        return "SSE";
+    else if (degrees >= 169 && degrees < 191)
+        return "S";
+    else if (degrees >= 191 && degrees < 214)
+        return "SSW";
+    else if (degrees >= 214 && degrees < 236)
+        return "SW";
+    else if (degrees >= 236 && degrees < 259)
+        return "WSW";
+    else if (degrees >= 259 && degrees < 281)
+        return "W";
+    else if (degrees >= 281 && degrees < 304)
+        return "WNW";
+    else if (degrees >= 304 && degrees < 326)
+        return "NW";
+    else if (degrees >= 326 && degrees < 348)
+        return "NNW";
+    else
+        return "N";
+}

src/gps/GeoCoord.h

@@ -117,6 +117,8 @@ class GeoCoord
     static float bearing(double lat1, double lon1, double lat2, double lon2);
     static float rangeRadiansToMeters(double range_radians);
     static float rangeMetersToRadians(double range_meters);
+    static uint bearingToDegrees(const char *bearing);
+    static const char *degreesToBearing(uint degrees);
 
     // Point to point conversions
     int32_t distanceTo(const GeoCoord &pointB);

src/gps/NMEAWPL.cpp

@@ -1,3 +1,4 @@
+#if !MESHTASTIC_EXCLUDE_GPS
 #include "NMEAWPL.h"
 #include "GeoCoord.h"
 #include "RTC.h"
@@ -74,10 +75,10 @@ uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const
 uint32_t printGGA(char *buf, size_t bufsz, const meshtastic_Position &pos)
 {
     GeoCoord geoCoord(pos.latitude_i, pos.longitude_i, pos.altitude);
-    tm *t = localtime((time_t *)&pos.timestamp);
+    tm *t = gmtime((time_t *)&pos.timestamp);
     if (getRTCQuality() > 0) { // use the device clock if we got time from somewhere. If not, use the GPS timestamp.
         uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice);
-        t = localtime((time_t *)&rtc_sec);
+        t = gmtime((time_t *)&rtc_sec);
     }
 
     uint32_t len = snprintf(
@@ -93,4 +94,6 @@ uint32_t printGGA(char *buf, size_t bufsz, const meshtastic_Position &pos)
     }
     len += snprintf(buf + len, bufsz - len, "*%02X\r\n", chk);
     return len;
-}
+}
+
+#endif

src/gps/RTC.cpp

@@ -40,7 +40,7 @@ void readFromRTC()
         t.tm_hour = rtc.getHour();
         t.tm_min = rtc.getMinute();
         t.tm_sec = rtc.getSecond();
-        tv.tv_sec = mktime(&t);
+        tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
         LOG_DEBUG("Read RTC time from RV3028 as %ld\n", tv.tv_sec);
         timeStartMsec = now;
@@ -68,7 +68,7 @@ void readFromRTC()
         t.tm_hour = tc.hour;
         t.tm_min = tc.minute;
         t.tm_sec = tc.second;
-        tv.tv_sec = mktime(&t);
+        tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
         LOG_DEBUG("Read RTC time from PCF8563 as %ld\n", tv.tv_sec);
         timeStartMsec = now;
@@ -96,21 +96,27 @@ void readFromRTC()
  *
  * If we haven't yet set our RTC this boot, set it from a GPS derived time
  */
-bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
+bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
 {
     static uint32_t lastSetMsec = 0;
     uint32_t now = millis();
 
     bool shouldSet;
-    if (q > currentQuality) {
+    if (forceUpdate) {
         shouldSet = true;
-        LOG_DEBUG("Upgrading time to quality %d\n", q);
-    } else if (q == RTCQualityGPS && (now - lastSetMsec) > (12 * 60 * 60 * 1000UL)) {
-        // Every 12 hrs we will slam in a new GPS time, to correct for local RTC clock drift
+        LOG_DEBUG("Overriding current RTC quality (%s) with incoming time of RTC quality of %s\n", RtcName(currentQuality),
+                  RtcName(q));
+    } else if (q > currentQuality) {
+        shouldSet = true;
+        LOG_DEBUG("Upgrading time to quality %s\n", RtcName(q));
+    } else if (q >= RTCQualityNTP && (now - lastSetMsec) > (12 * 60 * 60 * 1000UL)) {
+        // Every 12 hrs we will slam in a new GPS or Phone GPS / NTP time, to correct for local RTC clock drift
         shouldSet = true;
         LOG_DEBUG("Reapplying external time to correct clock drift %ld secs\n", tv->tv_sec);
-    } else
+    } else {
         shouldSet = false;
+        LOG_DEBUG("Current RTC quality: %s. Ignoring time of RTC quality of %s\n", RtcName(currentQuality), RtcName(q));
+    }
 
     if (shouldSet) {
         currentQuality = q;
@@ -128,7 +134,7 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
 #else
             rtc.initI2C();
 #endif
-            tm *t = localtime(&tv->tv_sec);
+            tm *t = gmtime(&tv->tv_sec);
             rtc.setTime(t->tm_year + 1900, t->tm_mon + 1, t->tm_wday, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
             LOG_DEBUG("RV3028_RTC setTime %02d-%02d-%02d %02d:%02d:%02d %ld\n", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
                       t->tm_hour, t->tm_min, t->tm_sec, tv->tv_sec);
@@ -142,7 +148,7 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
 #else
             rtc.begin();
 #endif
-            tm *t = localtime(&tv->tv_sec);
+            tm *t = gmtime(&tv->tv_sec);
             rtc.setDateTime(t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
             LOG_DEBUG("PCF8563_RTC setDateTime %02d-%02d-%02d %02d:%02d:%02d %ld\n", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
                       t->tm_hour, t->tm_min, t->tm_sec, tv->tv_sec);
@@ -162,6 +168,24 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
     }
 }
 
+const char *RtcName(RTCQuality quality)
+{
+    switch (quality) {
+    case RTCQualityNone:
+        return "None";
+    case RTCQualityDevice:
+        return "Device";
+    case RTCQualityFromNet:
+        return "Net";
+    case RTCQualityNTP:
+        return "NTP";
+    case RTCQualityGPS:
+        return "GPS";
+    default:
+        return "Unknown";
+    }
+}
+
 /**
  * Sets the RTC time if the provided time is of higher quality than the current RTC time.
  *
@@ -175,7 +199,9 @@ bool perhapsSetRTC(RTCQuality q, struct tm &t)
     The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of seconds that have elapsed since January 1, 1970
     (midnight UTC/GMT), not counting leap seconds (in ISO 8601: 1970-01-01T00:00:00Z).
     */
-    time_t res = mktime(&t);
+    // horrible hack to make mktime TZ agnostic - best practise according to
+    // https://www.gnu.org/software/libc/manual/html_node/Broken_002ddown-Time.html
+    time_t res = gm_mktime(&t);
     struct timeval tv;
     tv.tv_sec = res;
     tv.tv_usec = 0; // time.centisecond() * (10 / 1000);
@@ -189,14 +215,32 @@ bool perhapsSetRTC(RTCQuality q, struct tm &t)
     }
 }
 
+/**
+ * Returns the timezone offset in seconds.
+ *
+ * @return The timezone offset in seconds.
+ */
+int32_t getTZOffset()
+{
+    time_t now = getTime(false);
+    struct tm *gmt;
+    gmt = gmtime(&now);
+    gmt->tm_isdst = -1;
+    return (int32_t)difftime(now, mktime(gmt));
+}
+
 /**
  * Returns the current time in seconds since the Unix epoch (January 1, 1970).
  *
  * @return The current time in seconds since the Unix epoch.
  */
-uint32_t getTime()
+uint32_t getTime(bool local)
 {
-    return (((uint32_t)millis() - timeStartMsec) / 1000) + zeroOffsetSecs;
+    if (local) {
+        return (((uint32_t)millis() - timeStartMsec) / 1000) + zeroOffsetSecs + getTZOffset();
+    } else {
+        return (((uint32_t)millis() - timeStartMsec) / 1000) + zeroOffsetSecs;
+    }
 }
 
 /**
@@ -205,7 +249,19 @@ uint32_t getTime()
  * @param minQuality The minimum quality of the RTC time required for it to be considered valid.
  * @return The current time from the RTC if it meets the minimum quality requirement, or 0 if the time is not valid.
  */
-uint32_t getValidTime(RTCQuality minQuality)
+uint32_t getValidTime(RTCQuality minQuality, bool local)
 {
-    return (currentQuality >= minQuality) ? getTime() : 0;
+    return (currentQuality >= minQuality) ? getTime(local) : 0;
 }
+
+time_t gm_mktime(struct tm *tm)
+{
+    setenv("TZ", "GMT0", 1);
+    time_t res = mktime(tm);
+    if (*config.device.tzdef) {
+        setenv("TZ", config.device.tzdef, 1);
+    } else {
+        setenv("TZ", "UTC0", 1);
+    }
+    return res;
+}

src/gps/RTC.h

@@ -25,17 +25,22 @@ enum RTCQuality {
 RTCQuality getRTCQuality();
 
 /// If we haven't yet set our RTC this boot, set it from a GPS derived time
-bool perhapsSetRTC(RTCQuality q, const struct timeval *tv);
+bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate = false);
 bool perhapsSetRTC(RTCQuality q, struct tm &t);
 
+/// Return a string name for the quality
+const char *RtcName(RTCQuality quality);
+
 /// Return time since 1970 in secs.  While quality is RTCQualityNone we will be returning time based at zero
-uint32_t getTime();
+uint32_t getTime(bool local = false);
 
 /// Return time since 1970 in secs.  If quality is RTCQualityNone return zero
-uint32_t getValidTime(RTCQuality minQuality);
+uint32_t getValidTime(RTCQuality minQuality, bool local = false);
 
 void readFromRTC();
 
+time_t gm_mktime(struct tm *tm);
+
 #define SEC_PER_DAY 86400
 #define SEC_PER_HOUR 3600
 #define SEC_PER_MIN 60

src/gps/cas.h

@@ -0,0 +1,63 @@
+#pragma once
+
+// CASIC binary message definitions
+// Reference: https://www.icofchina.com/d/file/xiazai/2020-09-22/20f1b42b3a11ac52089caf3603b43fb5.pdf
+// ATGM33H-5N: https://www.icofchina.com/pro/mokuai/2016-08-01/4.html
+// (https://www.icofchina.com/d/file/xiazai/2016-12-05/b5c57074f4b1fcc62ba8c7868548d18a.pdf)
+
+// NEMA (Class ID - 0x4e) message IDs
+#define CAS_NEMA_GGA 0x00
+#define CAS_NEMA_GLL 0x01
+#define CAS_NEMA_GSA 0x02
+#define CAS_NEMA_GSV 0x03
+#define CAS_NEMA_RMC 0x04
+#define CAS_NEMA_VTG 0x05
+#define CAS_NEMA_GST 0x07
+#define CAS_NEMA_ZDA 0x08
+#define CAS_NEMA_DHV 0x0D
+
+// Size of a CAS-ACK-(N)ACK message (14 bytes)
+#define CAS_ACK_NACK_MSG_SIZE 0x0E
+
+// CFG-RST (0x06, 0x02)
+// Factory reset
+const uint8_t GPS::_message_CAS_CFG_RST_FACTORY[] = {
+    0xFF, 0x03, // Fields to clear
+    0x01,       // Reset Mode: Controlled Software reset
+    0x03        // Startup Mode: Factory
+};
+
+// CFG_RATE (0x06, 0x01)
+// 1HZ update rate, this should always be the case after
+// factory reset but update it regardless
+const uint8_t GPS::_message_CAS_CFG_RATE_1HZ[] = {
+    0xE8, 0x03, // Update Rate: 0x03E8 = 1000ms
+    0x00, 0x00  // Reserved
+};
+
+// CFG-NAVX (0x06, 0x07)
+// Initial ATGM33H-5N configuration, Updates for Dynamic Mode, Fix Mode, and SV system
+// Qwirk: The ATGM33H-5N-31 should only support GPS+BDS, however it will happily enable
+//  and use GPS+BDS+GLONASS iff the correct CFG_NAVX command is used.
+const uint8_t GPS::_message_CAS_CFG_NAVX_CONF[] = {
+    0x03, 0x01, 0x00, 0x00, // Update Mask: Dynamic Mode, Fix Mode, Nav Settings
+    0x03,                   // Dynamic Mode: Automotive
+    0x03,                   // Fix Mode: Auto 2D/3D
+    0x00,                   // Min SV
+    0x00,                   // Max SVs
+    0x00,                   // Min CNO
+    0x00,                   // Reserved1
+    0x00,                   // Init 3D fix
+    0x00,                   // Min Elevation
+    0x00,                   // Dr Limit
+    0x07,                   // Nav System: 2^0 = GPS, 2^1 = BDS 2^2 = GLONASS: 2^3
+                            // 3=GPS+BDS, 7=GPS+BDS+GLONASS
+    0x00, 0x00,             // Rollover Week
+    0x00, 0x00, 0x00, 0x00, // Fix Altitude
+    0x00, 0x00, 0x00, 0x00, // Fix Height Error
+    0x00, 0x00, 0x00, 0x00, // PDOP Maximum
+    0x00, 0x00, 0x00, 0x00, // TDOP Maximum
+    0x00, 0x00, 0x00, 0x00, // Position Accuracy Max
+    0x00, 0x00, 0x00, 0x00, // Time Accuracy Max
+    0x00, 0x00, 0x00, 0x00  // Static Hold Threshold
+};

src/gps/ubx.h

@@ -206,14 +206,14 @@ const uint8_t GPS::_message_GLL[] = {
     0x00        // Reserved
 };
 
-// Enable GSA. GSA - GPS DOP and active satellites, used for detailing the satellites used in the positioning and
+// Disable GSA. GSA - GPS DOP and active satellites, used for detailing the satellites used in the positioning and
 // the DOP (Dilution of Precision)
 const uint8_t GPS::_message_GSA[] = {
     0xF0, 0x02, // NMEA ID for GSA
     0x00,       // Rate for DDC
-    0x01,       // Rate for UART1
+    0x00,       // Rate for UART1
     0x00,       // Rate for UART2
-    0x01,       // Rate for USB usefull for native linux
+    0x00,       // Rate for USB usefull for native linux
     0x00,       // Rate for SPI
     0x00        // Reserved
 };
@@ -402,23 +402,28 @@ const uint8_t GPS::_message_VALSET_DISABLE_NMEA_BBR[] = {0x00, 0x02, 0x00, 0x00,
 // BBR layer config message:
 // b5 62 06 8a 09 00 00 02 00 00 07 00 92 20 06 5a 58
 
-// Turn NMEA GSA, GGA, RMC messages on:
-// Ram layer config message:
-// b5 62 06 8a 13 00 00 01 00 00 c0 00 91 20 01 bb 00 91 20 01 ac 00 91 20 01 e1 3b
-
-// BBR layer config message:
-// b5 62 06 8a 13 00 00 02 00 00 c0 00 91 20 01 bb 00 91 20 01 ac 00 91 20 01 e2 4d
+// Turn NMEA GGA, RMC messages on:
+// Layer config messages:
+// RAM:
+// b5 62 06 8a 0e 00 00 01 00 00 bb 00 91 20 01 ac 00 91 20 01 6a 8f
+// BBR:
+// b5 62 06 8a 0e 00 00 02 00 00 bb 00 91 20 01 ac 00 91 20 01 6b 9c
+// FLASH:
+// b5 62 06 8a 0e 00 00 04 00 00 bb 00 91 20 01 ac 00 91 20 01 6d b6
+// Doing this for the FLASH layer isn't really required since we save the config to flash later
 
 const uint8_t GPS::_message_VALSET_DISABLE_TXT_INFO_RAM[] = {0x00, 0x01, 0x00, 0x00, 0x07, 0x00, 0x92, 0x20, 0x03};
 const uint8_t GPS::_message_VALSET_DISABLE_TXT_INFO_BBR[] = {0x00, 0x02, 0x00, 0x00, 0x07, 0x00, 0x92, 0x20, 0x03};
-const uint8_t GPS::_message_VALSET_ENABLE_NMEA_RAM[] = {0x00, 0x01, 0x00, 0x00, 0xc0, 0x00, 0x91, 0x20, 0x01, 0xbb,
-                                                        0x00, 0x91, 0x20, 0x01, 0xac, 0x00, 0x91, 0x20, 0x01};
-const uint8_t GPS::_message_VALSET_ENABLE_NMEA_BBR[] = {0x00, 0x02, 0x00, 0x00, 0xc0, 0x00, 0x91, 0x20, 0x01, 0xbb,
-                                                        0x00, 0x91, 0x20, 0x01, 0xac, 0x00, 0x91, 0x20, 0x01};
+
+const uint8_t GPS::_message_VALSET_ENABLE_NMEA_RAM[] = {0x00, 0x01, 0x00, 0x00, 0xbb, 0x00, 0x91,
+                                                        0x20, 0x01, 0xac, 0x00, 0x91, 0x20, 0x01};
+const uint8_t GPS::_message_VALSET_ENABLE_NMEA_BBR[] = {0x00, 0x02, 0x00, 0x00, 0xbb, 0x00, 0x91,
+                                                        0x20, 0x01, 0xac, 0x00, 0x91, 0x20, 0x01};
 const uint8_t GPS::_message_VALSET_DISABLE_SBAS_RAM[] = {0x00, 0x01, 0x00, 0x00, 0x20, 0x00, 0x31,
                                                          0x10, 0x00, 0x05, 0x00, 0x31, 0x10, 0x00};
 const uint8_t GPS::_message_VALSET_DISABLE_SBAS_BBR[] = {0x00, 0x02, 0x00, 0x00, 0x20, 0x00, 0x31,
                                                          0x10, 0x00, 0x05, 0x00, 0x31, 0x10, 0x00};
+
 /*
 Operational issues with the M10:
 

src/graphics/EInkDisplay2.cpp

@@ -62,12 +62,19 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
         return false;
 
     // FIXME - only draw bits have changed (use backbuf similar to the other displays)
+    const bool flipped = config.display.flip_screen;
     for (uint32_t y = 0; y < displayHeight; y++) {
         for (uint32_t x = 0; x < displayWidth; x++) {
             // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficient
             auto b = buffer[x + (y / 8) * displayWidth];
             auto isset = b & (1 << (y & 7));
-            adafruitDisplay->drawPixel(x, y, isset ? GxEPD_BLACK : GxEPD_WHITE);
+
+            // Handle flip here, rather than with setRotation(),
+            // Avoids issues when display width is not a multiple of 8
+            if (flipped)
+                adafruitDisplay->drawPixel((displayWidth - 1) - x, (displayHeight - 1) - y, isset ? GxEPD_BLACK : GxEPD_WHITE);
+            else
+                adafruitDisplay->drawPixel(x, y, isset ? GxEPD_BLACK : GxEPD_WHITE);
         }
     }
 
@@ -151,31 +158,12 @@ bool EInkDisplay::connect()
 
 #elif defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_WIRELESS_PAPER)
     {
-        // Is this a normal boot, or a wake from deep sleep?
-        esp_sleep_wakeup_cause_t wakeReason = esp_sleep_get_wakeup_cause();
-
-        // If waking from sleep, need to reverse rtc_gpio_isolate(), called in cpuDeepSleep()
-        // Otherwise, SPI won't work
-        if (wakeReason != ESP_SLEEP_WAKEUP_UNDEFINED) {
-            // HSPI + other display pins
-            rtc_gpio_hold_dis((gpio_num_t)PIN_EINK_SCLK);
-            rtc_gpio_hold_dis((gpio_num_t)PIN_EINK_DC);
-            rtc_gpio_hold_dis((gpio_num_t)PIN_EINK_RES);
-            rtc_gpio_hold_dis((gpio_num_t)PIN_EINK_BUSY);
-            rtc_gpio_hold_dis((gpio_num_t)PIN_EINK_CS);
-            rtc_gpio_hold_dis((gpio_num_t)PIN_EINK_MOSI);
-        }
-
         // Start HSPI
         hspi = new SPIClass(HSPI);
         hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS); // SCLK, MISO, MOSI, SS
 
-        // Enable VExt (ACTIVE LOW)
-        // Unsure if called elsewhere first?
-        delay(100);
-        pinMode(Vext, OUTPUT);
-        digitalWrite(Vext, LOW);
-        delay(100);
+        // VExt already enabled in setup()
+        // RTC GPIO hold disabled in setup()
 
         // Create GxEPD2 objects
         auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, *hspi);
@@ -184,7 +172,6 @@ bool EInkDisplay::connect()
         // Init GxEPD2
         adafruitDisplay->init();
         adafruitDisplay->setRotation(3);
-        adafruitDisplay->clearScreen(); // Clearing now, so the boot logo will draw nice and smoothe (fast refresh)
     }
 #elif defined(PCA10059)
     {

src/graphics/EInkDynamicDisplay.cpp

@@ -5,7 +5,7 @@
 
 // Constructor
 EInkDynamicDisplay::EInkDynamicDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY geometry, HW_I2C i2cBus)
-    : EInkDisplay(address, sda, scl, geometry, i2cBus)
+    : EInkDisplay(address, sda, scl, geometry, i2cBus), NotifiedWorkerThread("EInkDynamicDisplay")
 {
     // If tracking ghost pixels, grab memory
 #ifdef EINK_LIMIT_GHOSTING_PX
@@ -112,12 +112,15 @@ void EInkDynamicDisplay::endOrDetach()
     // If the GxEPD2 version reports that it has the async modifications
 #ifdef HAS_EINK_ASYNCFULL
     if (previousRefresh == FULL) {
-        asyncRefreshRunning = true; // Set the flag - picked up at start of determineMode(), next loop.
+        asyncRefreshRunning = true; // Set the flag - checked in determineMode(); cleared by onNotify()
 
         if (previousFrameFlags & BLOCKING)
             awaitRefresh();
-        else
-            LOG_DEBUG("Async full-refresh begins\n");
+        else {
+            // Async begins
+            LOG_DEBUG("Async full-refresh begins (dropping frames)\n");
+            notifyLater(intervalPollAsyncRefresh, DUE_POLL_ASYNCREFRESH, true); // Hand-off to NotifiedWorkerThread
+        }
     }
 
     // Fast Refresh
@@ -141,7 +144,7 @@ bool EInkDynamicDisplay::determineMode()
     checkInitialized();
     checkForPromotion();
 #if defined(HAS_EINK_ASYNCFULL)
-    checkAsyncFullRefresh();
+    checkBusyAsyncRefresh();
 #endif
     checkRateLimiting();
 
@@ -252,6 +255,7 @@ void EInkDynamicDisplay::checkRateLimiting()
         if (now - previousRunMs < EINK_LIMIT_RATE_RESPONSIVE_SEC * 1000) {
             refresh = SKIPPED;
             reason = EXCEEDED_RATELIMIT_FAST;
+            LOG_DEBUG("refresh=SKIPPED, reason=EXCEEDED_RATELIMIT_FAST, frameFlags=0x%x\n", frameFlags);
             return;
         }
     }
@@ -447,9 +451,67 @@ void EInkDynamicDisplay::resetGhostPixelTracking()
 }
 #endif // EINK_LIMIT_GHOSTING_PX
 
+// Handle any asyc tasks
+void EInkDynamicDisplay::onNotify(uint32_t notification)
+{
+    // Which task
+    switch (notification) {
+    case DUE_POLL_ASYNCREFRESH:
+        pollAsyncRefresh();
+        break;
+    }
+}
+
 #ifdef HAS_EINK_ASYNCFULL
-// Check the status of an "async full-refresh", and run the finish-up code if the hardware is ready
-void EInkDynamicDisplay::checkAsyncFullRefresh()
+// Public: wait for an refresh already in progress, then run the post-update code. See Screen::setScreensaverFrames()
+void EInkDynamicDisplay::joinAsyncRefresh()
+{
+    // If no async refresh running, nothing to do
+    if (!asyncRefreshRunning)
+        return;
+
+    LOG_DEBUG("Joining an async refresh in progress\n");
+
+    // Continually poll the BUSY pin
+    while (adafruitDisplay->epd2.isBusy())
+        yield();
+
+    // If asyncRefreshRunning flag is still set, but display's BUSY pin reports the refresh is done
+    adafruitDisplay->endAsyncFull(); // Run the end of nextPage() code
+    EInkDisplay::endUpdate();        // Run base-class code to finish off update (NOT our derived class override)
+    asyncRefreshRunning = false;     // Unset the flag
+    LOG_DEBUG("Refresh complete\n");
+
+    // Note: this code only works because of a modification to meshtastic/GxEPD2.
+    // It is only equipped to intercept calls to nextPage()
+}
+
+// Called from NotifiedWorkerThread. Run the post-update code if the hardware is ready
+void EInkDynamicDisplay::pollAsyncRefresh()
+{
+    // In theory, this condition should never be met
+    if (!asyncRefreshRunning)
+        return;
+
+    // Still running, check back later
+    if (adafruitDisplay->epd2.isBusy()) {
+        // Schedule next call of pollAsyncRefresh()
+        NotifiedWorkerThread::notifyLater(intervalPollAsyncRefresh, DUE_POLL_ASYNCREFRESH, true);
+        return;
+    }
+
+    // If asyncRefreshRunning flag is still set, but display's BUSY pin reports the refresh is done
+    adafruitDisplay->endAsyncFull(); // Run the end of nextPage() code
+    EInkDisplay::endUpdate();        // Run base-class code to finish off update (NOT our derived class override)
+    asyncRefreshRunning = false;     // Unset the flag
+    LOG_DEBUG("Async full-refresh complete\n");
+
+    // Note: this code only works because of a modification to meshtastic/GxEPD2.
+    // It is only equipped to intercept calls to nextPage()
+}
+
+// Check the status of "async full-refresh"; skip if running
+void EInkDynamicDisplay::checkBusyAsyncRefresh()
 {
     // No refresh taking place, continue with determineMode()
     if (!asyncRefreshRunning)
@@ -473,14 +535,9 @@ void EInkDynamicDisplay::checkAsyncFullRefresh()
         return;
     }
 
-    // If we asyncRefreshRunning flag is still set, but display's BUSY pin reports the refresh is done
-    adafruitDisplay->endAsyncFull(); // Run the end of nextPage() code
-    EInkDisplay::endUpdate();        // Run base-class code to finish off update (NOT our derived class override)
-    asyncRefreshRunning = false;     // Unset the flag
-    LOG_DEBUG("Async full-refresh complete\n");
-
-    // Note: this code only works because of a modification to meshtastic/GxEPD2.
-    // It is only equipped to intercept calls to nextPage()
+    // Async refresh appears to have stopped, but wasn't caught by onNotify()
+    else
+        pollAsyncRefresh(); // Check (and terminate) the async refresh manually
 }
 
 // Hold control while an async refresh runs

src/graphics/EInkDynamicDisplay.h

@@ -6,6 +6,7 @@
 
 #include "EInkDisplay2.h"
 #include "GxEPD2_BW.h"
+#include "concurrency/NotifiedWorkerThread.h"
 
 /*
     Derives from the EInkDisplay adapter class.
@@ -14,7 +15,7 @@
     (Full, Fast, Skip)
 */
 
-class EInkDynamicDisplay : public EInkDisplay
+class EInkDynamicDisplay : public EInkDisplay, protected concurrency::NotifiedWorkerThread
 {
   public:
     // Constructor
@@ -61,13 +62,20 @@ class EInkDynamicDisplay : public EInkDisplay
         REDRAW_WITH_FULL,
     };
 
-    void configForFastRefresh();  // GxEPD2 code to set fast-refresh
-    void configForFullRefresh();  // GxEPD2 code to set full-refresh
-    bool determineMode();         // Assess situation, pick a refresh type
-    void applyRefreshMode();      // Run any relevant GxEPD2 code, so next update will use correct refresh type
-    void adjustRefreshCounters(); // Update fastRefreshCount
-    bool update();                // Trigger the display update - determine mode, then call base class
-    void endOrDetach();           // Run the post-update code, or delegate it off to checkAsyncFullRefresh()
+    enum notificationTypes : uint8_t { // What was onNotify() called for
+        NONE = 0,                      // This behavior (NONE=0) is fixed by NotifiedWorkerThread class
+        DUE_POLL_ASYNCREFRESH = 1,
+    };
+    const uint32_t intervalPollAsyncRefresh = 100;
+
+    void onNotify(uint32_t notification) override; // Handle any async tasks - overrides NotifiedWorkerThread
+    void configForFastRefresh();                   // GxEPD2 code to set fast-refresh
+    void configForFullRefresh();                   // GxEPD2 code to set full-refresh
+    bool determineMode();                          // Assess situation, pick a refresh type
+    void applyRefreshMode();                       // Run any relevant GxEPD2 code, so next update will use correct refresh type
+    void adjustRefreshCounters();                  // Update fastRefreshCount
+    bool update();                                 // Trigger the display update - determine mode, then call base class
+    void endOrDetach();                            // Run the post-update code, or delegate it off to checkBusyAsyncRefresh()
 
     // Checks as part of determineMode()
     void checkInitialized();              // Is this the very first frame?
@@ -101,6 +109,7 @@ class EInkDynamicDisplay : public EInkDisplay
     refreshTypes currentConfig = FULL; // Which refresh type is GxEPD2 currently configured for
 
     // Optional - track ghosting, pixel by pixel
+    // May 2024: no longer used by any display. Kept for possible future use.
 #ifdef EINK_LIMIT_GHOSTING_PX
     void countGhostPixels();        // Count any pixels which have moved from black to white since last full-refresh
     void checkExcessiveGhosting();  // Check if ghosting exceeds defined limit
@@ -111,17 +120,30 @@ class EInkDynamicDisplay : public EInkDisplay
 
     // Conditional - async full refresh - only with modified meshtastic/GxEPD2
 #if defined(HAS_EINK_ASYNCFULL)
-    void checkAsyncFullRefresh(); // Check the status of "async full-refresh"; run the post-update code if the hardware is ready
-    void awaitRefresh();          // Hold control while an async refresh runs
-    void endUpdate() override {}  // Disable base-class behavior of running post-update immediately after forceDisplay()
-    bool asyncRefreshRunning = false; // Flag, checked by checkAsyncFullRefresh()
+  public:
+    void joinAsyncRefresh(); // Main thread joins an async refresh already in progress. Blocks, then runs post-update code
+
+  protected:
+    void pollAsyncRefresh();          // Run the post-update code if the hardware is ready
+    void checkBusyAsyncRefresh();     // Check if display is busy running an async full-refresh (rejecting new frames)
+    void awaitRefresh();              // Hold control while an async refresh runs
+    void endUpdate() override {}      // Disable base-class behavior of running post-update immediately after forceDisplay()
+    bool asyncRefreshRunning = false; // Flag, checked by checkBusyAsyncRefresh()
+#else
+  public:
+    void joinAsyncRefresh() {} // Dummy method
+
+  protected:
+    void pollAsyncRefresh() {} // Dummy method. In theory, not reachable
 #endif
 };
 
-// Tidier calls to addFrameFlag() from outside class
+// Hide the ugly casts used in Screen.cpp
 #define EINK_ADD_FRAMEFLAG(display, flag) static_cast<EInkDynamicDisplay *>(display)->addFrameFlag(EInkDynamicDisplay::flag)
+#define EINK_JOIN_ASYNCREFRESH(display) static_cast<EInkDynamicDisplay *>(display)->joinAsyncRefresh()
 
 #else // !USE_EINK_DYNAMICDISPLAY
 // Dummy-macro, removes the need for include guards
 #define EINK_ADD_FRAMEFLAG(display, flag)
+#define EINK_JOIN_ASYNCREFRESH(display)
 #endif

src/graphics/NeoPixel.h

@@ -0,0 +1,4 @@
+#ifdef HAS_NEOPIXEL
+#include <Adafruit_NeoPixel.h>
+extern Adafruit_NeoPixel pixels;
+#endif

src/graphics/PointStruct.h

@@ -0,0 +1,4 @@
+struct PointStruct {
+    int x;
+    int y;
+};

src/graphics/Screen.h

@@ -20,7 +20,7 @@ class Screen
     void setOn(bool) {}
     void print(const char *) {}
     void doDeepSleep() {}
-    void forceDisplay() {}
+    void forceDisplay(bool forceUiUpdate = false) {}
     void startBluetoothPinScreen(uint32_t pin) {}
     void stopBluetoothPinScreen() {}
     void startRebootScreen() {}
@@ -48,6 +48,7 @@ class Screen
 
 #include "EInkDisplay2.h"
 #include "EInkDynamicDisplay.h"
+#include "PointStruct.h"
 #include "TFTDisplay.h"
 #include "TypedQueue.h"
 #include "commands.h"
@@ -73,6 +74,14 @@ class Screen
 #define MILES_TO_FEET 5280
 #endif
 
+// Intuitive colors. E-Ink display is inverted from OLED(?)
+#define EINK_BLACK OLEDDISPLAY_COLOR::WHITE
+#define EINK_WHITE OLEDDISPLAY_COLOR::BLACK
+
+// Base segment dimensions for T-Watch segmented display
+#define SEGMENT_WIDTH 16
+#define SEGMENT_HEIGHT 4
+
 namespace graphics
 {
 
@@ -125,6 +134,8 @@ class Screen : public concurrency::OSThread
   public:
     explicit Screen(ScanI2C::DeviceAddress, meshtastic_Config_DisplayConfig_OledType, OLEDDISPLAY_GEOMETRY);
 
+    ~Screen();
+
     Screen(const Screen &) = delete;
     Screen &operator=(const Screen &) = delete;
 
@@ -137,14 +148,14 @@ class Screen : public concurrency::OSThread
     // Not thread safe - must be called before any other methods are called.
     void setup();
 
-    /// Turns the screen on/off.
-    void setOn(bool on)
+    /// Turns the screen on/off. Optionally, pass a custom screensaver frame for E-Ink
+    void setOn(bool on, FrameCallback einkScreensaver = NULL)
     {
         if (!on)
-            handleSetOn(
-                false); // We handle off commands immediately, because they might be called because the CPU is shutting down
+            // We handle off commands immediately, because they might be called because the CPU is shutting down
+            handleSetOn(false, einkScreensaver);
         else
-            enqueueCmd(ScreenCmd{.cmd = on ? Cmd::SET_ON : Cmd::SET_OFF});
+            enqueueCmd(ScreenCmd{.cmd = Cmd::SET_ON});
     }
 
     /**
@@ -160,9 +171,6 @@ class Screen : public concurrency::OSThread
     void showPrevFrame() { enqueueCmd(ScreenCmd{.cmd = Cmd::SHOW_PREV_FRAME}); }
     void showNextFrame() { enqueueCmd(ScreenCmd{.cmd = Cmd::SHOW_NEXT_FRAME}); }
 
-    // Implementation to Adjust Brightness
-    uint8_t brightness = BRIGHTNESS_DEFAULT;
-
     /// Starts showing the Bluetooth PIN screen.
     //
     // Switches over to a static frame showing the Bluetooth pairing screen
@@ -196,6 +204,13 @@ class Screen : public concurrency::OSThread
         enqueueCmd(cmd);
     }
 
+    // functions for display brightness
+    void increaseBrightness();
+    void decreaseBrightness();
+
+    void setFunctionSymbal(std::string sym);
+    void removeFunctionSymbal(std::string sym);
+
     /// Stops showing the bluetooth PIN screen.
     void stopBluetoothPinScreen() { enqueueCmd(ScreenCmd{.cmd = Cmd::STOP_BLUETOOTH_PIN_SCREEN}); }
 
@@ -312,13 +327,18 @@ class Screen : public concurrency::OSThread
     int handleInputEvent(const InputEvent *arg);
 
     /// Used to force (super slow) eink displays to draw critical frames
-    void forceDisplay();
+    void forceDisplay(bool forceUiUpdate = false);
 
     /// Draws our SSL cert screen during boot (called from WebServer)
     void setSSLFrames();
 
     void setWelcomeFrames();
 
+#ifdef USE_EINK
+    /// Draw an image to remain on E-Ink display after screen off
+    void setScreensaverFrames(FrameCallback einkScreensaver = NULL);
+#endif
+
   protected:
     /// Updates the UI.
     //
@@ -340,7 +360,7 @@ class Screen : public concurrency::OSThread
     bool enqueueCmd(const ScreenCmd &cmd)
     {
         if (!useDisplay)
-            return true; // claim success if our display is not in use
+            return false; // not enqueued if our display is not in use
         else {
             bool success = cmdQueue.enqueue(cmd, 0);
             enabled = true; // handle ASAP (we are the registered reader for cmdQueue, but might have been disabled)
@@ -349,7 +369,7 @@ class Screen : public concurrency::OSThread
     }
 
     // Implementations of various commands, called from doTask().
-    void handleSetOn(bool on);
+    void handleSetOn(bool on, FrameCallback einkScreensaver = NULL);
     void handleOnPress();
     void handleShowNextFrame();
     void handleShowPrevFrame();
@@ -374,6 +394,27 @@ class Screen : public concurrency::OSThread
 
     static void drawDebugInfoWiFiTrampoline(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 
+#ifdef T_WATCH_S3
+    static void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
+
+    static void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
+
+    static void drawSegmentedDisplayCharacter(OLEDDisplay *display, int x, int y, uint8_t number, float scale = 1);
+
+    static void drawHorizontalSegment(OLEDDisplay *display, int x, int y, int width, int height);
+
+    static void drawVerticalSegment(OLEDDisplay *display, int x, int y, int width, int height);
+
+    static void drawSegmentedDisplayColon(OLEDDisplay *display, int x, int y, float scale = 1);
+
+    static void drawWatchFaceToggleButton(OLEDDisplay *display, int16_t x, int16_t y, bool digitalMode = true, float scale = 1);
+
+    static void drawBluetoothConnectedIcon(OLEDDisplay *display, int16_t x, int16_t y);
+
+    // Whether we are showing the digital watch face or the analog one
+    bool digitalWatchFace = true;
+#endif
+
     /// Queue of commands to execute in doTask.
     TypedQueue<ScreenCmd> cmdQueue;
     /// Whether we are using a display
@@ -384,6 +425,9 @@ class Screen : public concurrency::OSThread
     // Bluetooth PIN screen)
     bool showingNormalScreen = false;
 
+    // Implementation to Adjust Brightness
+    uint8_t brightness = BRIGHTNESS_DEFAULT; // H = 254, MH = 192, ML = 130 L = 103
+
     /// Holds state for debug information
     DebugInfo debugInfo;
 

src/graphics/ScreenFonts.h

@@ -8,7 +8,7 @@
 #include "graphics/fonts/OLEDDisplayFontsUA.h"
 #endif
 
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)) &&                                \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS)) &&          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL ArialMT_Plain_16  // Height: 19

src/graphics/TFTDisplay.cpp

@@ -8,6 +8,12 @@
 #define TFT_BACKLIGHT_ON HIGH
 #endif
 
+#ifdef GPIO_EXTENDER
+#include <SparkFunSX1509.h>
+#include <Wire.h>
+extern SX1509 gpioExtender;
+#endif
+
 #ifndef TFT_MESH
 #define TFT_MESH COLOR565(0x67, 0xEA, 0x94)
 #endif
@@ -333,7 +339,7 @@ static LGFX *tft = nullptr;
 #include <TFT_eSPI.h> // Graphics and font library for ILI9341 driver chip
 
 static TFT_eSPI *tft = nullptr; // Invoke library, pins defined in User_Setup.h
-#elif ARCH_PORTDUINO
+#elif ARCH_PORTDUINO && HAS_SCREEN != 0
 #include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
 
 class LGFX : public lgfx::LGFX_Device
@@ -356,6 +362,7 @@ class LGFX : public lgfx::LGFX_Device
             _panel_instance = new lgfx::Panel_ILI9341;
         auto buscfg = _bus_instance.config();
         buscfg.spi_mode = 0;
+        buscfg.spi_host = settingsMap[displayspidev];
 
         buscfg.pin_dc = settingsMap[displayDC]; // Set SPI DC pin number (-1 = disable)
 
@@ -381,6 +388,8 @@ class LGFX : public lgfx::LGFX_Device
                 _touch_instance = new lgfx::Touch_XPT2046;
             } else if (settingsMap[touchscreenModule] == stmpe610) {
                 _touch_instance = new lgfx::Touch_STMPE610;
+            } else if (settingsMap[touchscreenModule] == ft5x06) {
+                _touch_instance = new lgfx::Touch_FT5x06;
             }
             auto touch_cfg = _touch_instance->config();
 
@@ -392,6 +401,11 @@ class LGFX : public lgfx::LGFX_Device
             touch_cfg.pin_int = settingsMap[touchscreenIRQ];
             touch_cfg.bus_shared = true;
             touch_cfg.offset_rotation = 1;
+            if (settingsMap[touchscreenI2CAddr] != -1) {
+                touch_cfg.i2c_addr = settingsMap[touchscreenI2CAddr];
+            } else {
+                touch_cfg.spi_host = settingsMap[touchscreenspidev];
+            }
 
             _touch_instance->config(touch_cfg);
             _panel_instance->setTouch(_touch_instance);
@@ -402,13 +416,103 @@ class LGFX : public lgfx::LGFX_Device
 };
 
 static LGFX *tft = nullptr;
+
+#elif defined(HX8357_CS)
+#include <LovyanGFX.hpp> // Graphics and font library for HX8357 driver chip
+
+class LGFX : public lgfx::LGFX_Device
+{
+    lgfx::Panel_HX8357D _panel_instance;
+    lgfx::Bus_SPI _bus_instance;
+#if defined(USE_XPT2046)
+    lgfx::Touch_XPT2046 _touch_instance;
 #endif
 
-#if defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER) || defined(RAK14014) || ARCH_PORTDUINO
+  public:
+    LGFX(void)
+    {
+        // Panel_HX8357D
+        {
+            // configure SPI
+            auto cfg = _bus_instance.config();
+
+            cfg.spi_host = HX8357_SPI_HOST;
+            cfg.spi_mode = 0;
+            cfg.freq_write = SPI_FREQUENCY; // SPI clock for transmission (up to 80MHz, rounded to the value obtained by dividing
+                                            // 80MHz by an integer)
+            cfg.freq_read = SPI_READ_FREQUENCY; // SPI clock when receiving
+            cfg.spi_3wire = false;              // Set to true if reception is done on the MOSI pin
+            cfg.use_lock = true;                // Set to true to use transaction locking
+            cfg.dma_channel = SPI_DMA_CH_AUTO;  // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
+                                                // SPI_DMA_CH_AUTO=auto setting)
+            cfg.pin_sclk = HX8357_SCK;          // Set SPI SCLK pin number
+            cfg.pin_mosi = HX8357_MOSI;         // Set SPI MOSI pin number
+            cfg.pin_miso = HX8357_MISO;         // Set SPI MISO pin number (-1 = disable)
+            cfg.pin_dc = HX8357_RS;             // Set SPI DC pin number (-1 = disable)
+
+            _bus_instance.config(cfg);              // applies the set value to the bus.
+            _panel_instance.setBus(&_bus_instance); // set the bus on the panel.
+        }
+        {
+            // Set the display panel control.
+            auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
+
+            cfg.pin_cs = HX8357_CS;     // Pin number where CS is connected (-1 = disable)
+            cfg.pin_rst = HX8357_RESET; // Pin number where RST is connected  (-1 = disable)
+            cfg.pin_busy = HX8357_BUSY; // Pin number where BUSY is connected (-1 = disable)
+
+            cfg.panel_width = TFT_WIDTH;               // actual displayable width
+            cfg.panel_height = TFT_HEIGHT;             // actual displayable height
+            cfg.offset_x = TFT_OFFSET_X;               // Panel offset amount in X direction
+            cfg.offset_y = TFT_OFFSET_Y;               // Panel offset amount in Y direction
+            cfg.offset_rotation = TFT_OFFSET_ROTATION; // Rotation direction value offset 0~7 (4~7 is upside down)
+            cfg.dummy_read_pixel = 8;                  // Number of bits for dummy read before pixel readout
+            cfg.dummy_read_bits = 1;                   // Number of bits for dummy read before non-pixel data read
+            cfg.readable = true;                       // Set to true if data can be read
+            cfg.invert = TFT_INVERT;                   // Set to true if the light/darkness of the panel is reversed
+            cfg.rgb_order = false;                     // Set to true if the panel's red and blue are swapped
+            cfg.dlen_16bit = false;
+            cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
+
+            _panel_instance.config(cfg);
+        }
+#if defined(USE_XPT2046)
+        {
+            // Configure settings for touch control.
+            auto touch_cfg = _touch_instance.config();
+
+            touch_cfg.pin_cs = TOUCH_CS;
+            touch_cfg.x_min = 0;
+            touch_cfg.x_max = TFT_HEIGHT - 1;
+            touch_cfg.y_min = 0;
+            touch_cfg.y_max = TFT_WIDTH - 1;
+            touch_cfg.pin_int = -1;
+            touch_cfg.bus_shared = true;
+            touch_cfg.offset_rotation = 1;
+
+            _touch_instance.config(touch_cfg);
+            _panel_instance.setTouch(&_touch_instance);
+        }
+#endif
+        setPanel(&_panel_instance);
+    }
+};
+
+static LGFX *tft = nullptr;
+
+#endif
+
+#if defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER) || defined(RAK14014) || defined(HX8357_CS) ||            \
+    (ARCH_PORTDUINO && HAS_SCREEN != 0)
 #include "SPILock.h"
 #include "TFTDisplay.h"
 #include <SPI.h>
 
+#ifdef UNPHONE
+#include "unPhone.h"
+extern unPhone unphone;
+#endif
+
 TFTDisplay::TFTDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY geometry, HW_I2C i2cBus)
 {
     LOG_DEBUG("TFTDisplay!\n");
@@ -474,8 +578,10 @@ void TFTDisplay::sendCommand(uint8_t com)
 #elif defined(ST7735_BL_V05)
         pinMode(ST7735_BL_V05, OUTPUT);
         digitalWrite(ST7735_BL_V05, TFT_BACKLIGHT_ON);
-#endif
-#if defined(TFT_BL) && defined(TFT_BACKLIGHT_ON)
+#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
+        tft->wakeup();
+        tft->powerSaveOff();
+#elif defined(TFT_BL) && defined(TFT_BACKLIGHT_ON)
         digitalWrite(TFT_BL, TFT_BACKLIGHT_ON);
 #endif
 
@@ -486,9 +592,11 @@ void TFTDisplay::sendCommand(uint8_t com)
 #ifdef VTFT_CTRL
         digitalWrite(VTFT_CTRL, LOW);
 #endif
-
+#ifdef UNPHONE
+        unphone.backlight(true); // using unPhone library
+#endif
 #ifdef RAK14014
-#elif !defined(M5STACK)
+#elif !defined(M5STACK) && !defined(ST7789_CS) // T-Deck gets brightness set in Screen.cpp in the handleSetOn function
         tft->setBrightness(172);
 #endif
         break;
@@ -503,16 +611,22 @@ void TFTDisplay::sendCommand(uint8_t com)
 #elif defined(ST7735_BL_V05)
         pinMode(ST7735_BL_V05, OUTPUT);
         digitalWrite(ST7735_BL_V05, !TFT_BACKLIGHT_ON);
-#endif
-#if defined(TFT_BL) && defined(TFT_BACKLIGHT_ON)
+#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
+        tft->sleep();
+        tft->powerSaveOn();
+#elif defined(TFT_BL) && defined(TFT_BACKLIGHT_ON)
         digitalWrite(TFT_BL, !TFT_BACKLIGHT_ON);
 #endif
+
 #ifdef VTFT_CTRL_V03
         digitalWrite(VTFT_CTRL_V03, HIGH);
 #endif
 #ifdef VTFT_CTRL
         digitalWrite(VTFT_CTRL, HIGH);
 #endif
+#ifdef UNPHONE
+        unphone.backlight(false); // using unPhone library
+#endif
 #ifdef RAK14014
 #elif !defined(M5STACK)
         tft->setBrightness(0);
@@ -526,6 +640,12 @@ void TFTDisplay::sendCommand(uint8_t com)
     // Drop all other commands to device (we just update the buffer)
 }
 
+void TFTDisplay::setDisplayBrightness(uint8_t _brightness)
+{
+    tft->setBrightness(_brightness);
+    LOG_DEBUG("Brightness is set to value: %i \n", _brightness);
+}
+
 void TFTDisplay::flipScreenVertically()
 {
 #if defined(T_WATCH_S3)
@@ -584,6 +704,10 @@ bool TFTDisplay::connect()
     pinMode(ST7735_BL_V05, OUTPUT);
     digitalWrite(ST7735_BL_V05, TFT_BACKLIGHT_ON);
 #endif
+#ifdef UNPHONE
+    unphone.backlight(true); // using unPhone library
+    LOG_INFO("Power to TFT Backlight\n");
+#endif
 
     tft->init();
 

src/graphics/TFTDisplay.h

@@ -30,6 +30,9 @@ class TFTDisplay : public OLEDDisplay
     static bool hasTouch(void);
     static bool getTouch(int16_t *x, int16_t *y);
 
+    // Functions for changing display brightness
+    void setDisplayBrightness(uint8_t);
+
     /**
      * shim to make the abstraction happy
      *

src/graphics/images.h

@@ -14,7 +14,14 @@ const uint8_t imgUser[] PROGMEM = {0x3C, 0x42, 0x99, 0xA5, 0xA5, 0x99, 0x42, 0x3
 const uint8_t imgPositionEmpty[] PROGMEM = {0x20, 0x30, 0x28, 0x24, 0x42, 0xFF};
 const uint8_t imgPositionSolid[] PROGMEM = {0x20, 0x30, 0x38, 0x3C, 0x7E, 0xFF};
 
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || ARCH_PORTDUINO) &&              \
+#ifdef T_WATCH_S3
+const uint8_t bluetoothConnectedIcon[36] PROGMEM = {0xfe, 0x01, 0xff, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x00, 0xe3, 0x1f,
+                                                    0xf3, 0x3f, 0x33, 0x30, 0x33, 0x33, 0x33, 0x33, 0x03, 0x33, 0xff, 0x33,
+                                                    0xfe, 0x31, 0x00, 0x30, 0x30, 0x30, 0x30, 0x30, 0xf0, 0x3f, 0xe0, 0x1f};
+#endif
+
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS) ||           \
+     ARCH_PORTDUINO) &&                                                                                                          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff};
 const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f};
@@ -30,4 +37,171 @@ const uint8_t imgQuestion[] PROGMEM = {0xbf, 0x41, 0xc0, 0x8b, 0xdb, 0x70, 0xa1,
 const uint8_t imgSF[] PROGMEM = {0xd2, 0xb7, 0xad, 0xbb, 0x92, 0x01, 0xfd, 0xfd, 0x15, 0x85, 0xf5};
 #endif
 
-#include "img/icon.xbm"
+#ifndef EXCLUDE_EMOJI
+#define thumbs_height 25
+#define thumbs_width 25
+static unsigned char thumbup[] PROGMEM = {
+    0x00, 0x1C, 0x00, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x12, 0x00, 0x00, 0x00, 0x11, 0x00, 0x00, 0x80, 0x09, 0x00, 0x00,
+    0xC0, 0x08, 0x00, 0x00, 0x40, 0x08, 0x00, 0x00, 0x20, 0x04, 0x00, 0x00, 0x10, 0x04, 0x00, 0x00, 0x18, 0x02, 0x00, 0x00,
+    0x0C, 0xCE, 0x7F, 0x00, 0x04, 0x20, 0x80, 0x00, 0x02, 0x20, 0x80, 0x00, 0x02, 0x60, 0xC0, 0x00, 0x01, 0xF8, 0xFF, 0x01,
+    0x01, 0x08, 0x00, 0x01, 0x01, 0x08, 0x00, 0x01, 0x01, 0xF8, 0xFF, 0x00, 0x01, 0x10, 0x80, 0x00, 0x01, 0x18, 0x80, 0x00,
+    0x02, 0x30, 0xC0, 0x00, 0x06, 0xE0, 0x3F, 0x00, 0x0C, 0x20, 0x30, 0x00, 0x38, 0x20, 0x10, 0x00, 0xE0, 0xCF, 0x1F, 0x00,
+};
+
+static unsigned char thumbdown[] PROGMEM = {
+    0xE0, 0xCF, 0x1F, 0x00, 0x38, 0x20, 0x10, 0x00, 0x0C, 0x20, 0x30, 0x00, 0x06, 0xE0, 0x3F, 0x00, 0x02, 0x30, 0xC0, 0x00,
+    0x01, 0x18, 0x80, 0x00, 0x01, 0x10, 0x80, 0x00, 0x01, 0xF8, 0xFF, 0x00, 0x01, 0x08, 0x00, 0x01, 0x01, 0x08, 0x00, 0x01,
+    0x01, 0xF8, 0xFF, 0x01, 0x02, 0x60, 0xC0, 0x00, 0x02, 0x20, 0x80, 0x00, 0x04, 0x20, 0x80, 0x00, 0x0C, 0xCE, 0x7F, 0x00,
+    0x18, 0x02, 0x00, 0x00, 0x10, 0x04, 0x00, 0x00, 0x20, 0x04, 0x00, 0x00, 0x40, 0x08, 0x00, 0x00, 0xC0, 0x08, 0x00, 0x00,
+    0x80, 0x09, 0x00, 0x00, 0x00, 0x11, 0x00, 0x00, 0x00, 0x12, 0x00, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x00,
+};
+
+#define question_height 25
+#define question_width 25
+static unsigned char question[] PROGMEM = {
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x00, 0x80, 0xFF, 0x01, 0x00, 0xC0, 0xFF, 0x07, 0x00, 0xE0, 0xFF, 0x07, 0x00,
+    0xE0, 0xC3, 0x0F, 0x00, 0xF0, 0x81, 0x0F, 0x00, 0xF0, 0x01, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x80, 0x0F, 0x00,
+    0x00, 0xC0, 0x0F, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0xF8, 0x01, 0x00, 0x00, 0x7C, 0x00, 0x00,
+    0x00, 0x3C, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x3E, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+#define bang_height 30
+#define bang_width 30
+static unsigned char bang[] PROGMEM = {
+    0xFF, 0x0F, 0xFC, 0x3F, 0xFF, 0x0F, 0xFC, 0x3F, 0xFF, 0x0F, 0xFC, 0x3F, 0xFF, 0x07, 0xF8, 0x3F, 0xFF, 0x07, 0xF8, 0x3F,
+    0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F,
+    0xFE, 0x03, 0xF0, 0x1F, 0xFE, 0x03, 0xF0, 0x1F, 0xFC, 0x03, 0xF0, 0x0F, 0xFC, 0x03, 0xF0, 0x0F, 0xFC, 0x03, 0xF0, 0x0F,
+    0xFC, 0x03, 0xF0, 0x0F, 0xFC, 0x03, 0xF0, 0x0F, 0xFC, 0x03, 0xF0, 0x0F, 0xFC, 0x01, 0xE0, 0x0F, 0xFC, 0x01, 0xE0, 0x0F,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0xC0, 0x03, 0xFC, 0x03, 0xF0, 0x0F, 0xFE, 0x03, 0xF0, 0x1F,
+    0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F, 0xFC, 0x03, 0xF0, 0x0F, 0xF8, 0x01, 0xE0, 0x07,
+};
+
+#define haha_height 30
+#define haha_width 30
+static unsigned char haha[] PROGMEM = {
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x01, 0x00,
+    0x00, 0xFC, 0x0F, 0x00, 0x00, 0x1F, 0x3E, 0x00, 0x80, 0x03, 0x70, 0x00, 0xC0, 0x01, 0xE0, 0x00, 0xC0, 0x00, 0xC2, 0x00,
+    0x60, 0x00, 0x03, 0x00, 0x60, 0x00, 0xC1, 0x1F, 0x60, 0x80, 0x8F, 0x31, 0x30, 0x0E, 0x80, 0x31, 0x30, 0x10, 0x30, 0x1F,
+    0x30, 0x08, 0x58, 0x00, 0x30, 0x04, 0x6C, 0x03, 0x60, 0x00, 0xF3, 0x01, 0x60, 0xC0, 0xFC, 0x01, 0x80, 0x38, 0xBF, 0x01,
+    0xE0, 0xC5, 0xDF, 0x00, 0xB0, 0xF9, 0xEF, 0x00, 0x30, 0xF1, 0x73, 0x00, 0xB0, 0x1D, 0x3E, 0x00, 0xF0, 0xFD, 0x0F, 0x00,
+    0xE0, 0xE0, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+#define wave_icon_height 30
+#define wave_icon_width 30
+static unsigned char wave_icon[] PROGMEM = {
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0xC0, 0x00,
+    0x00, 0x0C, 0x9C, 0x01, 0x80, 0x17, 0x20, 0x01, 0x80, 0x26, 0x46, 0x02, 0x80, 0x44, 0x88, 0x02, 0xC0, 0x89, 0x8A, 0x02,
+    0x40, 0x93, 0x8B, 0x02, 0x40, 0x26, 0x13, 0x00, 0x80, 0x44, 0x16, 0x00, 0xC0, 0x89, 0x24, 0x00, 0x40, 0x93, 0x60, 0x00,
+    0x40, 0x26, 0x40, 0x00, 0x80, 0x0C, 0x80, 0x00, 0x00, 0x09, 0x80, 0x00, 0x00, 0x02, 0x80, 0x00, 0x40, 0x06, 0x80, 0x00,
+    0x50, 0x0C, 0x80, 0x00, 0x50, 0x08, 0x40, 0x00, 0x90, 0x10, 0x20, 0x00, 0xB0, 0x21, 0x10, 0x00, 0x20, 0x47, 0x18, 0x00,
+    0x40, 0x80, 0x0F, 0x00, 0x80, 0x01, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+#define cowboy_height 30
+#define cowboy_width 30
+static unsigned char cowboy[] PROGMEM = {
+    0x00, 0xF0, 0x03, 0x00, 0x00, 0xFC, 0x0F, 0x00, 0x00, 0xFE, 0x1F, 0x00, 0x00, 0xFF, 0x3F, 0x00, 0x3C, 0xFE, 0x1F, 0x0F,
+    0xFE, 0xFE, 0xDF, 0x1F, 0xFF, 0xFF, 0xFF, 0x3F, 0xFF, 0xFF, 0xFF, 0x3F, 0xFF, 0xFF, 0xFF, 0x3F, 0xFF, 0xFF, 0xFF, 0x3F,
+    0x3E, 0xC0, 0x00, 0x1F, 0x1E, 0x00, 0x00, 0x1E, 0x0C, 0x0C, 0x0C, 0x0C, 0x08, 0x0E, 0x1C, 0x04, 0x00, 0x0E, 0x1C, 0x00,
+    0x04, 0x0E, 0x1C, 0x08, 0x04, 0x0E, 0x1C, 0x08, 0x04, 0x04, 0x08, 0x08, 0x04, 0x00, 0x00, 0x08, 0x04, 0x00, 0x00, 0x08,
+    0x8C, 0x07, 0x70, 0x0C, 0x88, 0xFC, 0x4F, 0x04, 0x88, 0x01, 0x40, 0x04, 0x90, 0xFF, 0x7F, 0x02, 0x30, 0x03, 0x30, 0x03,
+    0x60, 0x0E, 0x9C, 0x01, 0xC0, 0xF8, 0xC7, 0x00, 0x80, 0x01, 0x60, 0x00, 0x00, 0x0E, 0x1C, 0x00, 0x00, 0xF8, 0x07, 0x00,
+};
+
+#define deadmau5_height 30
+#define deadmau5_width 60
+static unsigned char deadmau5[] PROGMEM = {
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x07, 0x00,
+    0x00, 0xFC, 0x03, 0x00, 0x00, 0xFF, 0x3F, 0x00, 0x80, 0xFF, 0x0F, 0x00, 0xC0, 0xFF, 0xFF, 0x00, 0xE0, 0xFF, 0x3F, 0x00,
+    0xE0, 0xFF, 0xFF, 0x01, 0xF0, 0xFF, 0x7F, 0x00, 0xF0, 0xFF, 0xFF, 0x03, 0xF8, 0xFF, 0xFF, 0x00, 0xF0, 0xFF, 0xFF, 0x07,
+    0xFC, 0xFF, 0xFF, 0x00, 0xF0, 0xFF, 0xFF, 0x0F, 0xFC, 0xFF, 0xFF, 0x00, 0xF0, 0xFF, 0xFF, 0x0F, 0xFE, 0xFF, 0xFF, 0x00,
+    0xF0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0xF0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0xE0, 0xFF, 0x3F, 0xFC,
+    0x0F, 0xFF, 0x7F, 0x00, 0xC0, 0xFF, 0x1F, 0xF8, 0x0F, 0xFC, 0x3F, 0x00, 0x80, 0xFF, 0x0F, 0xF8, 0x1F, 0xFC, 0x1F, 0x00,
+    0x00, 0xFF, 0x0F, 0xFC, 0x3F, 0xFC, 0x0F, 0x00, 0x00, 0xF8, 0x1F, 0xFF, 0xFF, 0xFE, 0x01, 0x00, 0x00, 0x00, 0xFC, 0xFF,
+    0xFF, 0x07, 0x00, 0x00, 0x00, 0x00, 0xFC, 0xFF, 0xFF, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00,
+    0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0xC0, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x80, 0x07, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+#define sun_width 30
+#define sun_height 30
+static unsigned char sun[] PROGMEM = {
+    0x00, 0xC0, 0x00, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x30, 0xC0, 0x00, 0x03,
+    0x70, 0x00, 0x80, 0x03, 0xF0, 0x00, 0xC0, 0x03, 0xF0, 0xF8, 0xC7, 0x03, 0xE0, 0xFC, 0xCF, 0x01, 0x00, 0xFE, 0x1F, 0x00,
+    0x00, 0xFF, 0x3F, 0x00, 0x80, 0xFF, 0x7F, 0x00, 0x80, 0xFF, 0x7F, 0x00, 0x8E, 0xFF, 0x7F, 0x1C, 0x9F, 0xFF, 0x7F, 0x3E,
+    0x9F, 0xFF, 0x7F, 0x3E, 0x8E, 0xFF, 0x7F, 0x1C, 0x80, 0xFF, 0x7F, 0x00, 0x80, 0xFF, 0x7F, 0x00, 0x00, 0xFF, 0x3F, 0x00,
+    0x00, 0xFE, 0x1F, 0x00, 0x00, 0xFC, 0x0F, 0x00, 0xC0, 0xF9, 0xE7, 0x00, 0xE0, 0x01, 0xE0, 0x01, 0xF0, 0x01, 0xE0, 0x03,
+    0xF0, 0xC0, 0xC0, 0x03, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xC0, 0x00, 0x00,
+};
+
+#define rain_width 30
+#define rain_height 30
+static unsigned char rain[] PROGMEM = {
+    0xC0, 0x0F, 0xC0, 0x00, 0x40, 0x00, 0x80, 0x00, 0x20, 0x00, 0x80, 0x00, 0x20, 0x00, 0x80, 0x03, 0x38, 0x00,
+    0x00, 0x0E, 0x0C, 0x00, 0x00, 0x18, 0x02, 0x00, 0x00, 0x10, 0x03, 0x00, 0x00, 0x30, 0x01, 0x00, 0x00, 0x20,
+    0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x03, 0x00, 0x00, 0x30, 0x02, 0x00,
+    0x00, 0x10, 0x06, 0x00, 0x00, 0x08, 0xFC, 0xFF, 0xFF, 0x07, 0xF0, 0xFF, 0xFF, 0x01, 0x80, 0x00, 0x01, 0x00,
+    0xC0, 0xC0, 0x81, 0x03, 0xA0, 0x60, 0xC1, 0x03, 0x90, 0x20, 0x41, 0x01, 0xF0, 0xE0, 0xC0, 0x01, 0x60, 0x4C,
+    0x98, 0x00, 0x00, 0x0E, 0x1C, 0x00, 0x00, 0x0B, 0x12, 0x00, 0x00, 0x09, 0x1A, 0x00, 0x00, 0x06, 0x0E, 0x00,
+};
+
+#define cloud_height 30
+#define cloud_width 30
+static unsigned char cloud[] PROGMEM = {
+    0x00, 0x80, 0x07, 0x00, 0x00, 0xE0, 0x1F, 0x00, 0x00, 0x70, 0x30, 0x00, 0x00, 0x10, 0x60, 0x00, 0x80, 0x1F, 0x40, 0x00,
+    0xC0, 0x0F, 0xC0, 0x00, 0xC0, 0x00, 0x80, 0x00, 0x60, 0x00, 0x80, 0x00, 0x20, 0x00, 0x80, 0x00, 0x20, 0x00, 0x80, 0x01,
+    0x20, 0x00, 0x00, 0x07, 0x38, 0x00, 0x00, 0x0C, 0x0C, 0x00, 0x00, 0x08, 0x06, 0x00, 0x00, 0x18, 0x02, 0x00, 0x00, 0x10,
+    0x02, 0x00, 0x00, 0x30, 0x03, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20,
+    0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x30, 0x03, 0x00, 0x00, 0x10,
+    0x02, 0x00, 0x00, 0x10, 0x06, 0x00, 0x00, 0x18, 0x0C, 0x00, 0x00, 0x0C, 0xFC, 0xFF, 0xFF, 0x07, 0xF0, 0xFF, 0xFF, 0x03,
+};
+
+#define fog_height 25
+#define fog_width 25
+static unsigned char fog[] PROGMEM = {
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x3C, 0x00, 0xFE, 0x01, 0xFF, 0x00, 0x87, 0xC7, 0xC3, 0x01, 0x03, 0xFE, 0x80, 0x01,
+    0x00, 0x38, 0x00, 0x00, 0xFC, 0x00, 0x7E, 0x00, 0xFF, 0x83, 0xFF, 0x01, 0x03, 0xFF, 0x81, 0x01, 0x00, 0x7C, 0x00, 0x00,
+    0xF8, 0x00, 0x3E, 0x00, 0xFE, 0x01, 0xFF, 0x00, 0x87, 0xC7, 0xC3, 0x01, 0x03, 0xFE, 0x80, 0x01, 0x00, 0x38, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+#define devil_height 30
+#define devil_width 30
+static unsigned char devil[] PROGMEM = {
+    0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x10, 0x03, 0xC0, 0x01, 0x38, 0x07, 0x7C, 0x0F, 0x38, 0x1F, 0x03, 0x30, 0x1E,
+    0xFE, 0x01, 0xE0, 0x1F, 0x7E, 0x00, 0x80, 0x1F, 0x3C, 0x00, 0x00, 0x0F, 0x1C, 0x00, 0x00, 0x0E, 0x18, 0x00, 0x00, 0x06,
+    0x08, 0x00, 0x00, 0x04, 0x0C, 0x00, 0x00, 0x0C, 0x0C, 0x00, 0x00, 0x0C, 0x0C, 0x00, 0x00, 0x0C, 0x0C, 0x0E, 0x1C, 0x0C,
+    0x0C, 0x18, 0x06, 0x0C, 0x0C, 0x1C, 0x06, 0x0C, 0x0C, 0x1C, 0x0E, 0x0C, 0x0C, 0x1C, 0x0E, 0x0C, 0x0C, 0x0C, 0x06, 0x0C,
+    0x08, 0x00, 0x00, 0x06, 0x18, 0x02, 0x10, 0x06, 0x10, 0x0C, 0x0C, 0x03, 0x30, 0xF8, 0x07, 0x03, 0x60, 0xE0, 0x80, 0x01,
+    0xC0, 0x00, 0xC0, 0x00, 0x80, 0x01, 0x70, 0x00, 0x00, 0x06, 0x1C, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+#define heart_height 30
+#define heart_width 30
+static unsigned char heart[] PROGMEM = {
+    0x00, 0x00, 0x00, 0x00, 0xC0, 0x03, 0xF0, 0x00, 0xF8, 0x0F, 0xFC, 0x07, 0xFC, 0x1F, 0x06, 0x0E, 0xFE, 0x3F, 0x03, 0x18,
+    0xFE, 0xFF, 0x7F, 0x10, 0xFF, 0xFF, 0xFF, 0x31, 0xFF, 0xFF, 0xFF, 0x33, 0xFF, 0xFF, 0xFF, 0x37, 0xFF, 0xFF, 0xFF, 0x37,
+    0xFF, 0xFF, 0xFF, 0x3F, 0xFF, 0xFF, 0xFF, 0x3F, 0xFF, 0xFF, 0xFF, 0x3F, 0xFE, 0xFF, 0xFF, 0x1F, 0xFE, 0xFF, 0xFF, 0x1F,
+    0xFC, 0xFF, 0xFF, 0x0F, 0xFC, 0xFF, 0xFF, 0x0F, 0xF8, 0xFF, 0xFF, 0x07, 0xF0, 0xFF, 0xFF, 0x03, 0xF0, 0xFF, 0xFF, 0x03,
+    0xE0, 0xFF, 0xFF, 0x01, 0xC0, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0x7F, 0x00, 0x00, 0xFF, 0x3F, 0x00, 0x00, 0xFE, 0x1F, 0x00,
+    0x00, 0xFC, 0x0F, 0x00, 0x00, 0xF8, 0x07, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0x80, 0x00, 0x00,
+};
+
+#define poo_width 30
+#define poo_height 30
+static unsigned char poo[] PROGMEM = {
+    0x00, 0x1C, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x00, 0xEC, 0x01, 0x00, 0x00, 0x8C, 0x07, 0x00, 0x00, 0x0C, 0x06, 0x00,
+    0x00, 0x24, 0x0C, 0x00, 0x00, 0x34, 0x08, 0x00, 0x00, 0x1F, 0x08, 0x00, 0xC0, 0x0F, 0x08, 0x00, 0xC0, 0x00, 0x3C, 0x00,
+    0x60, 0x00, 0x7C, 0x00, 0x60, 0x00, 0xC6, 0x00, 0x20, 0x00, 0xCB, 0x00, 0xA0, 0xC7, 0xFF, 0x00, 0xE0, 0x7F, 0xF7, 0x00,
+    0xF0, 0x18, 0xE3, 0x03, 0x78, 0x18, 0x41, 0x03, 0x6C, 0x9B, 0x5D, 0x06, 0x64, 0x9B, 0x5D, 0x04, 0x44, 0x1A, 0x41, 0x04,
+    0x4C, 0xD8, 0x63, 0x06, 0xF8, 0xFC, 0x36, 0x06, 0xFE, 0x0F, 0x9C, 0x1F, 0x07, 0x03, 0xC0, 0x30, 0x03, 0x00, 0x78, 0x20,
+    0x01, 0x00, 0x1F, 0x20, 0x03, 0xE0, 0x03, 0x20, 0x07, 0x7E, 0x04, 0x30, 0xFE, 0x0F, 0xFC, 0x1F, 0xF0, 0x00, 0xF0, 0x0F,
+};
+#endif
+
+#include "img/icon.xbm"

src/input/InputBroker.h

@@ -8,6 +8,8 @@ typedef struct _InputEvent {
     const char *source;
     char inputEvent;
     char kbchar;
+    uint16_t touchX;
+    uint16_t touchY;
 } InputEvent;
 class InputBroker : public Observable<const InputEvent *>
 {

src/input/LinuxInput.cpp

@@ -24,7 +24,8 @@ LinuxInput::LinuxInput(const char *name) : concurrency::OSThread(name)
 
 void LinuxInput::deInit()
 {
-    close(fd);
+    if (fd >= 0)
+        close(fd);
 }
 
 int32_t LinuxInput::runOnce()
@@ -154,6 +155,9 @@ int32_t LinuxInput::runOnce()
                     case KEY_ENTER: // Enter
                         e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT;
                         break;
+                    case KEY_POWER:
+                        system("poweroff");
+                        break;
                     default: // all other keys
                         if (keymap[code]) {
                             e.inputEvent = ANYKEY;

src/input/LinuxInput.h

@@ -38,7 +38,7 @@ class LinuxInput : public Observable<const InputEvent *>, public concurrency::OS
     int queue_progress = 0;
 
     struct epoll_event events[MAX_EVENTS];
-    int fd;
+    int fd = -1;
     int ret;
     uint8_t report[8];
     int epollfd;

src/input/TouchScreenBase.h

@@ -3,6 +3,7 @@
 #include "InputBroker.h"
 #include "concurrency/OSThread.h"
 #include "mesh/NodeDB.h"
+#include "time.h"
 
 typedef struct _TouchEvent {
     const char *source;

src/input/TouchScreenImpl1.cpp

@@ -4,7 +4,7 @@
 #include "configuration.h"
 #include "modules/ExternalNotificationModule.h"
 
-#ifdef ARCH_PORTDUINO
+#if ARCH_PORTDUINO
 #include "platform/portduino/PortduinoGlue.h"
 #endif
 
@@ -49,6 +49,10 @@ void TouchScreenImpl1::onEvent(const TouchEvent &event)
 {
     InputEvent e;
     e.source = event.source;
+
+    e.touchX = event.x;
+    e.touchY = event.y;
+
     switch (event.touchEvent) {
     case TOUCH_ACTION_LEFT: {
         e.inputEvent = static_cast<char>(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT);

src/input/UpDownInterruptBase.cpp

@@ -1,7 +1,7 @@
 #include "UpDownInterruptBase.h"
 #include "configuration.h"
 
-UpDownInterruptBase::UpDownInterruptBase(const char *name)
+UpDownInterruptBase::UpDownInterruptBase(const char *name) : concurrency::OSThread(name)
 {
     this->_originName = name;
 }
@@ -24,31 +24,48 @@ void UpDownInterruptBase::init(uint8_t pinDown, uint8_t pinUp, uint8_t pinPress,
     attachInterrupt(this->_pinUp, onIntUp, RISING);
 
     LOG_DEBUG("Up/down/press GPIO initialized (%d, %d, %d)\n", this->_pinUp, this->_pinDown, pinPress);
+
+    this->setInterval(100);
+}
+
+int32_t UpDownInterruptBase::runOnce()
+{
+    InputEvent e;
+    e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
+
+    if (this->action == UPDOWN_ACTION_PRESSED) {
+        LOG_DEBUG("GPIO event Press\n");
+        e.inputEvent = this->_eventPressed;
+    } else if (this->action == UPDOWN_ACTION_UP) {
+        LOG_DEBUG("GPIO event Up\n");
+        e.inputEvent = this->_eventUp;
+    } else if (this->action == UPDOWN_ACTION_DOWN) {
+        LOG_DEBUG("GPIO event Down\n");
+        e.inputEvent = this->_eventDown;
+    }
+
+    if (e.inputEvent != meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE) {
+        e.source = this->_originName;
+        e.kbchar = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
+        this->notifyObservers(&e);
+    }
+
+    this->action = UPDOWN_ACTION_NONE;
+
+    return 100;
 }
 
 void UpDownInterruptBase::intPressHandler()
 {
-    InputEvent e;
-    e.source = this->_originName;
-    LOG_DEBUG("GPIO event Press\n");
-    e.inputEvent = this->_eventPressed;
-    this->notifyObservers(&e);
+    this->action = UPDOWN_ACTION_PRESSED;
 }
 
 void UpDownInterruptBase::intDownHandler()
 {
-    InputEvent e;
-    e.source = this->_originName;
-    LOG_DEBUG("GPIO event Down\n");
-    e.inputEvent = this->_eventDown;
-    this->notifyObservers(&e);
+    this->action = UPDOWN_ACTION_DOWN;
 }
 
 void UpDownInterruptBase::intUpHandler()
 {
-    InputEvent e;
-    e.source = this->_originName;
-    LOG_DEBUG("GPIO event Up\n");
-    e.inputEvent = this->_eventUp;
-    this->notifyObservers(&e);
+    this->action = UPDOWN_ACTION_UP;
 }

src/input/UpDownInterruptBase.h

@@ -3,7 +3,7 @@
 #include "InputBroker.h"
 #include "mesh/NodeDB.h"
 
-class UpDownInterruptBase : public Observable<const InputEvent *>
+class UpDownInterruptBase : public Observable<const InputEvent *>, public concurrency::OSThread
 {
   public:
     explicit UpDownInterruptBase(const char *name);
@@ -13,6 +13,13 @@ class UpDownInterruptBase : public Observable<const InputEvent *>
     void intDownHandler();
     void intUpHandler();
 
+    int32_t runOnce() override;
+
+  protected:
+    enum UpDownInterruptBaseActionType { UPDOWN_ACTION_NONE, UPDOWN_ACTION_PRESSED, UPDOWN_ACTION_UP, UPDOWN_ACTION_DOWN };
+
+    volatile UpDownInterruptBaseActionType action = UPDOWN_ACTION_NONE;
+
   private:
     uint8_t _pinDown = 0;
     uint8_t _pinUp = 0;

src/input/kbI2cBase.cpp

@@ -1,5 +1,4 @@
 #include "kbI2cBase.h"
-
 #include "configuration.h"
 #include "detect/ScanI2C.h"
 
@@ -138,6 +137,9 @@ int32_t KbI2cBase::runOnce()
                     break;
                 case 0x13: // Code scanner says the SYM key is 0x13
                     is_sym = !is_sym;
+                    e.inputEvent = ANYKEY;
+                    e.kbchar =
+                        is_sym ? 0xf1 : 0xf2; // send 0xf1 to tell CannedMessages to display that the modifier key is active
                     break;
                 case 0x0a: // apparently Enter on Q10 is a line feed instead of carriage return
                     e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT;
@@ -193,6 +195,75 @@ int32_t KbI2cBase::runOnce()
             e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
             e.source = this->_originName;
             switch (c) {
+            case 0x71: // This is the button q. If modifier and q pressed, it cancels the input
+                if (is_sym) {
+                    is_sym = false;
+                    e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_CANCEL;
+                } else {
+                    e.inputEvent = ANYKEY;
+                    e.kbchar = c;
+                }
+                break;
+            case 0x74: // letter t. if modifier and t pressed call 'tab'
+                if (is_sym) {
+                    is_sym = false;
+                    e.inputEvent = ANYKEY;
+                    e.kbchar = 0x09; // TAB Scancode
+                } else {
+                    e.inputEvent = ANYKEY;
+                    e.kbchar = c;
+                }
+                break;
+            case 0x6d: // letter m. Modifier makes it mute notifications
+                if (is_sym) {
+                    is_sym = false;
+                    e.inputEvent = ANYKEY;
+                    e.kbchar = 0xac; // mute notifications
+                } else {
+                    e.inputEvent = ANYKEY;
+                    e.kbchar = c;
+                }
+                break;
+            case 0x6f: // letter o(+). Modifier makes screen increase in brightness
+                if (is_sym) {
+                    is_sym = false;
+                    e.inputEvent = ANYKEY;
+                    e.kbchar = 0x11; // Increase Brightness code
+                } else {
+                    e.inputEvent = ANYKEY;
+                    e.kbchar = c;
+                }
+                break;
+            case 0x69: // letter i(-).  Modifier makes screen decrease in brightness
+                if (is_sym) {
+                    is_sym = false;
+                    e.inputEvent = ANYKEY;
+                    e.kbchar = 0x12; // Decrease Brightness code
+                } else {
+                    e.inputEvent = ANYKEY;
+                    e.kbchar = c;
+                }
+                break;
+            case 0x20: // Space. Send network ping like double press does
+                if (is_sym) {
+                    is_sym = false;
+                    e.inputEvent = ANYKEY;
+                    e.kbchar = 0xaf; // (fn + space)
+                } else {
+                    e.inputEvent = ANYKEY;
+                    e.kbchar = c;
+                }
+                break;
+            case 0x67: // letter g. toggle gps
+                if (is_sym) {
+                    is_sym = false;
+                    e.inputEvent = ANYKEY;
+                    e.kbchar = 0x9e;
+                } else {
+                    e.inputEvent = ANYKEY;
+                    e.kbchar = c;
+                }
+                break;
             case 0x1b: // ESC
                 e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_CANCEL;
                 break;
@@ -216,6 +287,22 @@ int32_t KbI2cBase::runOnce()
                 e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT;
                 e.kbchar = 0xb7;
                 break;
+            case 0xc: // Modifier key: 0xc is alt+c (Other options could be: 0xea = shift+mic button or 0x4 shift+$(speaker))
+                // toggle moddifiers button.
+                is_sym = !is_sym;
+                e.inputEvent = ANYKEY;
+                e.kbchar = is_sym ? 0xf1 : 0xf2; // send 0xf1 to tell CannedMessages to display that the modifier key is active
+                break;
+            case 0x90: // fn+r
+            case 0x91: // fn+t
+            case 0x9b: // fn+s
+            case 0xac: // fn+m
+            case 0x9e: // fn+g
+            case 0xaf: // fn+space
+                // just pass those unmodified
+                e.inputEvent = ANYKEY;
+                e.kbchar = c;
+                break;
             case 0x0d: // Enter
                 e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT;
                 break;
@@ -229,6 +316,7 @@ int32_t KbI2cBase::runOnce()
                 }
                 e.inputEvent = ANYKEY;
                 e.kbchar = c;
+                is_sym = false;
                 break;
             }
 

src/main.cpp

@@ -1,4 +1,7 @@
+#include "configuration.h"
+#if !MESHTASTIC_EXCLUDE_GPS
 #include "GPS.h"
+#endif
 #include "MeshRadio.h"
 #include "MeshService.h"
 #include "NodeDB.h"
@@ -6,7 +9,7 @@
 #include "ReliableRouter.h"
 #include "airtime.h"
 #include "buzz.h"
-#include "configuration.h"
+
 #include "error.h"
 #include "power.h"
 // #include "debug.h"
@@ -33,10 +36,14 @@
 // #include <driver/rtc_io.h>
 
 #ifdef ARCH_ESP32
+#if !MESHTASTIC_EXCLUDE_WEBSERVER
 #include "mesh/http/WebServer.h"
+#endif
+#if !MESHTASTIC_EXCLUDE_BLUETOOTH
 #include "nimble/NimbleBluetooth.h"
 NimbleBluetooth *nimbleBluetooth;
 #endif
+#endif
 
 #ifdef ARCH_NRF52
 #include "NRF52Bluetooth.h"
@@ -52,16 +59,24 @@ NRF52Bluetooth *nrf52Bluetooth;
 #include "mesh/api/ethServerAPI.h"
 #include "mesh/eth/ethClient.h"
 #endif
+
+#if !MESHTASTIC_EXCLUDE_MQTT
 #include "mqtt/MQTT.h"
+#endif
 
 #include "LLCC68Interface.h"
+#include "LR1110Interface.h"
+#include "LR1120Interface.h"
 #include "RF95Interface.h"
 #include "SX1262Interface.h"
 #include "SX1268Interface.h"
 #include "SX1280Interface.h"
+#include "detect/LoRaRadioType.h"
+
 #ifdef ARCH_STM32WL
 #include "STM32WLE5JCInterface.h"
 #endif
+
 #if !HAS_RADIO && defined(ARCH_PORTDUINO)
 #include "platform/portduino/SimRadio.h"
 #endif
@@ -78,11 +93,13 @@ NRF52Bluetooth *nrf52Bluetooth;
 #if HAS_BUTTON || defined(ARCH_PORTDUINO)
 #include "ButtonThread.h"
 #endif
+
 #include "PowerFSMThread.h"
 
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
 #include "AccelerometerThread.h"
 #include "AmbientLightingThread.h"
+AccelerometerThread *accelerometerThread;
 #endif
 
 #ifdef HAS_I2S
@@ -129,6 +146,9 @@ ATECCX08A atecc;
 Adafruit_DRV2605 drv;
 #endif
 
+// Global LoRa radio type
+LoRaRadioType radioType = NO_RADIO;
+
 bool isVibrating = false;
 
 bool eink_found = true;
@@ -162,6 +182,11 @@ const char *getDeviceName()
 
 static int32_t ledBlinker()
 {
+    // Still set up the blinking (heartbeat) interval but skip code path below, so LED will blink if
+    // config.device.led_heartbeat_disabled is changed
+    if (config.device.led_heartbeat_disabled)
+        return 1000;
+
     static bool ledOn;
     ledOn ^= 1;
 
@@ -175,10 +200,6 @@ uint32_t timeLastPowered = 0;
 
 static Periodic *ledPeriodic;
 static OSThread *powerFSMthread;
-#if HAS_BUTTON || defined(ARCH_PORTDUINO)
-static OSThread *buttonThread;
-#endif
-static OSThread *accelerometerThread;
 static OSThread *ambientLightingThread;
 SPISettings spiSettings(4000000, MSBFIRST, SPI_MODE0);
 
@@ -323,7 +344,7 @@ void setup()
     Wire.begin(I2C_SDA, I2C_SCL);
 #elif defined(ARCH_PORTDUINO)
     if (settingsStrings[i2cdev] != "") {
-        LOG_INFO("Using %s as I2C device.\n", settingsStrings[i2cdev]);
+        LOG_INFO("Using %s as I2C device.\n", settingsStrings[i2cdev].c_str());
         Wire.begin(settingsStrings[i2cdev].c_str());
     } else {
         LOG_INFO("No I2C device configured, skipping.\n");
@@ -341,18 +362,11 @@ void setup()
     delay(1);
 #endif
 
-#ifdef RAK4630
-#ifdef PIN_3V3_EN
-    // We need to enable 3.3V periphery in order to scan it
-    pinMode(PIN_3V3_EN, OUTPUT);
-    digitalWrite(PIN_3V3_EN, HIGH);
-#endif
 #ifdef AQ_SET_PIN
     // RAK-12039 set pin for Air quality sensor
     pinMode(AQ_SET_PIN, OUTPUT);
     digitalWrite(AQ_SET_PIN, HIGH);
 #endif
-#endif
 
 #ifdef T_DECK
     // enable keyboard
@@ -373,7 +387,7 @@ void setup()
     // We need to scan here to decide if we have a screen for nodeDB.init() and because power has been applied to
     // accessories
     auto i2cScanner = std::unique_ptr<ScanI2CTwoWire>(new ScanI2CTwoWire());
-#ifdef HAS_WIRE
+#if HAS_WIRE
     LOG_INFO("Scanning for i2c devices...\n");
 #endif
 
@@ -519,6 +533,14 @@ void setup()
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::QMI8658, meshtastic_TelemetrySensorType_QMI8658)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::QMC5883L, meshtastic_TelemetrySensorType_QMC5883L)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::PMSA0031, meshtastic_TelemetrySensorType_PMSA003I)
+    SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::RCWL9620, meshtastic_TelemetrySensorType_RCWL9620)
+    SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::VEML7700, meshtastic_TelemetrySensorType_VEML7700)
+    SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::TSL2591, meshtastic_TelemetrySensorType_TSL25911FN)
+    SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::OPT3001, meshtastic_TelemetrySensorType_OPT3001)
+    SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::MLX90632, meshtastic_TelemetrySensorType_MLX90632)
+    SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::SHT4X, meshtastic_TelemetrySensorType_SHT4X)
+    SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::AHT10, meshtastic_TelemetrySensorType_AHT10)
+    SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::DFROBOT_LARK, meshtastic_TelemetrySensorType_DFROBOT_LARK)
 
     i2cScanner.reset();
 
@@ -526,10 +548,6 @@ void setup()
     setupSDCard();
 #endif
 
-#ifdef RAK4630
-    // scanEInkDevice();
-#endif
-
     // LED init
 
 #ifdef LED_PIN
@@ -554,7 +572,7 @@ void setup()
 
     // We do this as early as possible because this loads preferences from flash
     // but we need to do this after main cpu init (esp32setup), because we need the random seed set
-    nodeDB.init();
+    nodeDB = new NodeDB;
 
     // If we're taking on the repeater role, use flood router and turn off 3V3_S rail because peripherals are not needed
     if (config.device.role == meshtastic_Config_DeviceConfig_Role_REPEATER) {
@@ -585,7 +603,7 @@ void setup()
     screen_model = meshtastic_Config_DisplayConfig_OledType_OLED_SH1107; // keep dimension of 128x64
 #endif
 
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
     if (acc_info.type != ScanI2C::DeviceType::NONE) {
         config.display.wake_on_tap_or_motion = true;
         moduleConfig.external_notification.enabled = true;
@@ -593,7 +611,9 @@ void setup()
     }
 #endif
 
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+#if defined(HAS_NEOPIXEL) || defined(UNPHONE) || defined(RGBLED_RED)
+    ambientLightingThread = new AmbientLightingThread(ScanI2C::DeviceType::NONE);
+#elif !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
     if (rgb_found.type != ScanI2C::DeviceType::NONE) {
         ambientLightingThread = new AmbientLightingThread(rgb_found.type);
     }
@@ -616,39 +636,51 @@ void setup()
     pinMode(LORA_CS, OUTPUT);
     digitalWrite(LORA_CS, HIGH);
     SPI1.begin(false);
-#else  // HW_SPI1_DEVICE
+#else                      // HW_SPI1_DEVICE
     SPI.setSCK(LORA_SCK);
     SPI.setTX(LORA_MOSI);
     SPI.setRX(LORA_MISO);
     SPI.begin(false);
-#endif // HW_SPI1_DEVICE
-#elif ARCH_PORTDUINO
-    SPI.begin(settingsStrings[spidev].c_str());
+#endif                     // HW_SPI1_DEVICE
 #elif !defined(ARCH_ESP32) // ARCH_RP2040
     SPI.begin();
 #else
     // ESP32
     SPI.begin(LORA_SCK, LORA_MISO, LORA_MOSI, LORA_CS);
-    LOG_WARN("SPI.begin(SCK=%d, MISO=%d, MOSI=%d, NSS=%d)\n", LORA_SCK, LORA_MISO, LORA_MOSI, LORA_CS);
+    LOG_DEBUG("SPI.begin(SCK=%d, MISO=%d, MOSI=%d, NSS=%d)\n", LORA_SCK, LORA_MISO, LORA_MOSI, LORA_CS);
     SPI.setFrequency(4000000);
 #endif
 
     // Initialize the screen first so we can show the logo while we start up everything else.
     screen = new graphics::Screen(screen_found, screen_model, screen_geometry);
 
+    // setup TZ prior to time actions.
+    if (*config.device.tzdef) {
+        setenv("TZ", config.device.tzdef, 1);
+    } else {
+        setenv("TZ", "GMT0", 1);
+    }
+    tzset();
+    LOG_DEBUG("Set Timezone to %s\n", getenv("TZ"));
+
     readFromRTC(); // read the main CPU RTC at first (in case we can't get GPS time)
 
+#if !MESHTASTIC_EXCLUDE_GPS
     // If we're taking on the repeater role, ignore GPS
-    if (config.device.role != meshtastic_Config_DeviceConfig_Role_REPEATER &&
-        config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_NOT_PRESENT) {
-        gps = GPS::createGps();
+    if (HAS_GPS) {
+        if (config.device.role != meshtastic_Config_DeviceConfig_Role_REPEATER &&
+            config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_NOT_PRESENT) {
+            gps = GPS::createGps();
+            if (gps) {
+                gpsStatus->observe(&gps->newStatus);
+            } else {
+                LOG_DEBUG("Running without GPS.\n");
+            }
+        }
     }
-    if (gps) {
-        gpsStatus->observe(&gps->newStatus);
-    } else {
-        LOG_DEBUG("Running without GPS.\n");
-    }
-    nodeStatus->observe(&nodeDB.newStatus);
+#endif
+
+    nodeStatus->observe(&nodeDB->newStatus);
 
 #ifdef HAS_I2S
     LOG_DEBUG("Starting audio thread\n");
@@ -660,6 +692,12 @@ void setup()
     // Now that the mesh service is created, create any modules
     setupModules();
 
+#ifdef LED_PIN
+    // Turn LED off after boot, if heartbeat by config
+    if (config.device.led_heartbeat_disabled)
+        digitalWrite(LED_PIN, LOW ^ LED_INVERTED);
+#endif
+
 // Do this after service.init (because that clears error_code)
 #ifdef HAS_PMU
     if (!pmu_found)
@@ -668,7 +706,7 @@ void setup()
 
 // Don't call screen setup until after nodedb is setup (because we need
 // the current region name)
-#if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7789_CS)
+#if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7789_CS) || defined(HX8357_CS)
     screen->setup();
 #elif defined(ARCH_PORTDUINO)
     if (screen_found.port != ScanI2C::I2CPort::NO_I2C || settingsMap[displayPanel]) {
@@ -696,7 +734,8 @@ void setup()
     if (settingsMap[use_sx1262]) {
         if (!rIf) {
             LOG_DEBUG("Attempting to activate sx1262 radio on SPI port %s\n", settingsStrings[spidev].c_str());
-            LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
+            LockingArduinoHal *RadioLibHAL =
+                new LockingArduinoHal(SPI, spiSettings, (settingsMap[ch341Quirk] ? settingsMap[busy] : RADIOLIB_NC));
             rIf = new SX1262Interface((LockingArduinoHal *)RadioLibHAL, settingsMap[cs], settingsMap[irq], settingsMap[reset],
                                       settingsMap[busy]);
             if (!rIf->init()) {
@@ -710,7 +749,8 @@ void setup()
     } else if (settingsMap[use_rf95]) {
         if (!rIf) {
             LOG_DEBUG("Attempting to activate rf95 radio on SPI port %s\n", settingsStrings[spidev].c_str());
-            LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
+            LockingArduinoHal *RadioLibHAL =
+                new LockingArduinoHal(SPI, spiSettings, (settingsMap[ch341Quirk] ? settingsMap[busy] : RADIOLIB_NC));
             rIf = new RF95Interface((LockingArduinoHal *)RadioLibHAL, settingsMap[cs], settingsMap[irq], settingsMap[reset],
                                     settingsMap[busy]);
             if (!rIf->init()) {
@@ -737,6 +777,21 @@ void setup()
                 LOG_INFO("SX1280 Radio init succeeded, using SX1280 radio\n");
             }
         }
+    } else if (settingsMap[use_sx1268]) {
+        if (!rIf) {
+            LOG_DEBUG("Attempting to activate sx1268 radio on SPI port %s\n", settingsStrings[spidev].c_str());
+            LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
+            rIf = new SX1268Interface((LockingArduinoHal *)RadioLibHAL, settingsMap[cs], settingsMap[irq], settingsMap[reset],
+                                      settingsMap[busy]);
+            if (!rIf->init()) {
+                LOG_ERROR("Failed to find SX1268 radio\n");
+                delete rIf;
+                rIf = NULL;
+                exit(EXIT_FAILURE);
+            } else {
+                LOG_INFO("SX1268 Radio init succeeded, using SX1268 radio\n");
+            }
+        }
     }
 
 #elif defined(HW_SPI1_DEVICE)
@@ -755,6 +810,7 @@ void setup()
             rIf = NULL;
         } else {
             LOG_INFO("STM32WL Radio init succeeded, using STM32WL radio\n");
+            radioType = STM32WLx_RADIO;
         }
     }
 #endif
@@ -768,6 +824,7 @@ void setup()
             rIf = NULL;
         } else {
             LOG_INFO("Using SIMULATED radio!\n");
+            radioType = SIM_RADIO;
         }
     }
 #endif
@@ -781,6 +838,7 @@ void setup()
             rIf = NULL;
         } else {
             LOG_INFO("RF95 Radio init succeeded, using RF95 radio\n");
+            radioType = RF95_RADIO;
         }
     }
 #endif
@@ -794,6 +852,7 @@ void setup()
             rIf = NULL;
         } else {
             LOG_INFO("SX1262 Radio init succeeded, using SX1262 radio\n");
+            radioType = SX1262_RADIO;
         }
     }
 #endif
@@ -807,6 +866,7 @@ void setup()
             rIf = NULL;
         } else {
             LOG_INFO("SX1268 Radio init succeeded, using SX1268 radio\n");
+            radioType = SX1268_RADIO;
         }
     }
 #endif
@@ -820,6 +880,33 @@ void setup()
             rIf = NULL;
         } else {
             LOG_INFO("LLCC68 Radio init succeeded, using LLCC68 radio\n");
+            radioType = LLCC68_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_LR1110)
+    if (!rIf) {
+        rIf = new LR1110Interface(RadioLibHAL, LR1110_SPI_NSS_PIN, LR1110_IRQ_PIN, LR1110_NRESER_PIN, LR1110_BUSY_PIN);
+        if (!rIf->init()) {
+            LOG_WARN("Failed to find LR1110 radio\n");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("LR1110 Radio init succeeded, using LR1110 radio\n");
+        }
+    }
+#endif
+
+#if defined(USE_LR1120)
+    if (!rIf) {
+        rIf = new LR1120Interface(RadioLibHAL, LR1120_SPI_NSS_PIN, LR1120_IRQ_PIN, LR1120_NRESER_PIN, LR1120_BUSY_PIN);
+        if (!rIf->init()) {
+            LOG_WARN("Failed to find LR1120 radio\n");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("LR1120 Radio init succeeded, using LR1120 radio\n");
         }
     }
 #endif
@@ -833,6 +920,7 @@ void setup()
             rIf = NULL;
         } else {
             LOG_INFO("SX1280 Radio init succeeded, using SX1280 radio\n");
+            radioType = SX1280_RADIO;
         }
     }
 #endif
@@ -842,7 +930,7 @@ void setup()
     if ((config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24) && (!rIf->wideLora())) {
         LOG_WARN("Radio chip does not support 2.4GHz LoRa. Reverting to unset.\n");
         config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_UNSET;
-        nodeDB.saveToDisk(SEGMENT_CONFIG);
+        nodeDB->saveToDisk(SEGMENT_CONFIG);
         if (!rIf->reconfigure()) {
             LOG_WARN("Reconfigure failed, rebooting\n");
             screen->startRebootScreen();
@@ -850,9 +938,12 @@ void setup()
         }
     }
 
+#if !MESHTASTIC_EXCLUDE_MQTT
     mqttInit();
+#endif
 
 #ifndef ARCH_PORTDUINO
+
     // Initialize Wifi
 #if HAS_WIFI
     initWifi();
@@ -864,7 +955,7 @@ void setup()
 #endif
 #endif
 
-#ifdef ARCH_ESP32
+#if defined(ARCH_ESP32) && !MESHTASTIC_EXCLUDE_WEBSERVER
     // Start web server thread.
     webServerThread = new WebServerThread();
 #endif
@@ -965,4 +1056,4 @@ void loop()
         mainDelay.delay(delayMsec);
     }
     // if (didWake) LOG_DEBUG("wake!\n");
-}
+}

src/main.h

@@ -22,6 +22,11 @@ extern NimbleBluetooth *nimbleBluetooth;
 extern NRF52Bluetooth *nrf52Bluetooth;
 #endif
 
+#if ARCH_PORTDUINO
+extern HardwareSPI *DisplaySPI;
+extern HardwareSPI *LoraSPI;
+
+#endif
 extern ScanI2C::DeviceAddress screen_found;
 extern ScanI2C::DeviceAddress cardkb_found;
 extern uint8_t kb_model;
@@ -48,12 +53,18 @@ extern Adafruit_DRV2605 drv;
 extern AudioThread *audioThread;
 #endif
 
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+#include "AccelerometerThread.h"
+extern AccelerometerThread *accelerometerThread;
+#endif
+
 extern bool isVibrating;
 
 extern int TCPPort; // set by Portduino
 
 // Global Screen singleton.
 extern graphics::Screen *screen;
+
 // extern Observable<meshtastic::PowerStatus> newPowerStatus; //TODO: move this to main-esp32.cpp somehow or a helper class
 
 // extern meshtastic::PowerStatus *powerStatus;

src/memGet.cpp

@@ -22,6 +22,8 @@ uint32_t MemGet::getFreeHeap()
     return ESP.getFreeHeap();
 #elif defined(ARCH_NRF52)
     return dbgHeapFree();
+#elif defined(ARCH_RP2040)
+    return rp2040.getFreeHeap();
 #else
     // this platform does not have heap management function implemented
     return UINT32_MAX;
@@ -38,6 +40,8 @@ uint32_t MemGet::getHeapSize()
     return ESP.getHeapSize();
 #elif defined(ARCH_NRF52)
     return dbgHeapTotal();
+#elif defined(ARCH_RP2040)
+    return rp2040.getTotalHeap();
 #else
     // this platform does not have heap management function implemented
     return UINT32_MAX;

src/mesh/Channels.cpp

@@ -7,7 +7,9 @@
 
 #include <assert.h>
 
+#if !MESHTASTIC_EXCLUDE_MQTT
 #include "mqtt/MQTT.h"
+#endif
 
 /// 16 bytes of random PSK for our _public_ default channel that all devices power up on (AES128)
 static const uint8_t defaultpsk[] = {0xd4, 0xf1, 0xbb, 0x3a, 0x20, 0x29, 0x07, 0x59,
@@ -18,7 +20,9 @@ Channels channels;
 const char *Channels::adminChannel = "admin";
 const char *Channels::gpioChannel = "gpio";
 const char *Channels::serialChannel = "serial";
+#if !MESHTASTIC_EXCLUDE_MQTT
 const char *Channels::mqttChannel = "mqtt";
+#endif
 
 uint8_t xorHash(const uint8_t *p, size_t len)
 {
@@ -195,10 +199,12 @@ void Channels::onConfigChanged()
         if (ch.role == meshtastic_Channel_Role_PRIMARY)
             primaryIndex = i;
     }
+#if !MESHTASTIC_EXCLUDE_MQTT
     if (channels.anyMqttEnabled() && mqtt && !mqtt->isEnabled()) {
         LOG_DEBUG("MQTT is enabled on at least one channel, so set MQTT thread to run immediately\n");
         mqtt->start();
     }
+#endif
 }
 
 meshtastic_Channel &Channels::getByIndex(ChannelIndex chIndex)

src/mesh/Default.h

@@ -2,6 +2,7 @@
 #include <NodeDB.h>
 #include <cstdint>
 #define ONE_DAY 24 * 60 * 60
+#define ONE_MINUTE_MS 60 * 1000
 
 #define default_gps_update_interval IF_ROUTER(ONE_DAY, 2 * 60)
 #define default_broadcast_interval_secs IF_ROUTER(ONE_DAY / 2, 15 * 60)
@@ -27,4 +28,4 @@ class Default
     static uint32_t getConfiguredOrDefaultMs(uint32_t configuredInterval);
     static uint32_t getConfiguredOrDefaultMs(uint32_t configuredInterval, uint32_t defaultInterval);
     static uint32_t getConfiguredOrDefault(uint32_t configured, uint32_t defaultValue);
-};
+};

src/mesh/FloodingRouter.cpp

@@ -35,11 +35,10 @@ bool FloodingRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
 
 void FloodingRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtastic_Routing *c)
 {
-    bool isAck =
-        ((c && c->error_reason == meshtastic_Routing_Error_NONE)); // consider only ROUTING_APP message without error as ACK
-    if (isAck && p->to != getNodeNum()) {
-        // do not flood direct message that is ACKed
-        LOG_DEBUG("Receiving an ACK not for me, but don't need to rebroadcast this direct message anymore.\n");
+    bool isAckorReply = (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) && (p->decoded.request_id != 0);
+    if (isAckorReply && p->to != getNodeNum() && p->to != NODENUM_BROADCAST) {
+        // do not flood direct message that is ACKed or replied to
+        LOG_DEBUG("Receiving an ACK or reply not for me, but don't need to rebroadcast this direct message anymore.\n");
         Router::cancelSending(p->to, p->decoded.request_id); // cancel rebroadcast for this DM
     }
     if ((p->to != getNodeNum()) && (p->hop_limit > 0) && (getFrom(p) != getNodeNum())) {
@@ -49,15 +48,6 @@ void FloodingRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtas
 
                 tosend->hop_limit--; // bump down the hop count
 
-                if (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) {
-                    // If it is a traceRoute request, update the route that it went via me
-                    if (traceRouteModule && traceRouteModule->wantPacket(p))
-                        traceRouteModule->updateRoute(tosend);
-                    // If it is a neighborInfo packet, update last_sent_by_id
-                    if (neighborInfoModule && neighborInfoModule->wantPacket(p))
-                        neighborInfoModule->updateLastSentById(tosend);
-                }
-
                 LOG_INFO("Rebroadcasting received floodmsg to neighbors\n");
                 // Note: we are careful to resend using the original senders node id
                 // We are careful not to call our hooked version of send() - because we don't want to check this again

src/mesh/FloodingRouter.h

@@ -2,8 +2,6 @@
 
 #include "PacketHistory.h"
 #include "Router.h"
-#include "modules/NeighborInfoModule.h"
-#include "modules/TraceRouteModule.h"
 
 /**
  * This is a mixin that extends Router with the ability to do Naive Flooding (in the standard mesh protocol sense)

src/mesh/InterfacesTemplates.cpp

@@ -1,3 +1,5 @@
+#include "LR11x0Interface.cpp"
+#include "LR11x0Interface.h"
 #include "SX126xInterface.cpp"
 #include "SX126xInterface.h"
 #include "SX128xInterface.cpp"
@@ -10,6 +12,8 @@ template class SX126xInterface<SX1262>;
 template class SX126xInterface<SX1268>;
 template class SX126xInterface<LLCC68>;
 template class SX128xInterface<SX1280>;
+template class LR11x0Interface<LR1110>;
+template class LR11x0Interface<LR1120>;
 #ifdef ARCH_STM32WL
 template class SX126xInterface<STM32WLx>;
 #endif