mirror of
https://github.com/alexhopeoconnor/firmware.git
synced 2026-10-04 03:18:10 +10:00
Ben Meadors
f6f116a39d
Audit of the custom_meshtastic_* manifest on the variants backing the newest boards, against the protobuf HardwareModel enum, the compiled HW_VENDOR, the board flash size and the artwork actually published by the web flasher. No support flag changes here - actively_supported is left exactly as each variant already had it. ThinkNode M9 had no HW_VENDOR arm, so every M9 has been reporting PRIVATE_HW while its manifest advertised 131; add the mapping and rename the slug to the enum name (THINKNODE_M9) it is meant to mirror. Seeed SenseCAP Mesh-Tracker X1 moves from the PR matrix to release, and its images entry now points at seeed_mesh_tracker_x1.svg, which is what the flasher actually ships - the hyphenated name resolved to nothing. T-Beam BPF, T-Beam 1W and Heltec Wireless Tracker V2 declared the architecture as "esp32s3"; the value is copied verbatim into the manifest, and the flash flow matches on the normalized "esp32-s3". T-Beam BPF and M5Stack Unit C6L both build default_16MB.csv on 16 MB flash but declared no partition scheme, which leaves the flasher on the 4 MB fallback offsets for a legacy clean install. Meshnology W10 and W12 gain the artwork and vendor tag that already exist for them.
44 lines
1.8 KiB
INI
44 lines
1.8 KiB
INI
[env:meshnology_w10]
|
|
custom_meshtastic_hw_model = 140
|
|
custom_meshtastic_hw_model_slug = MESHNOLOGY_W10
|
|
custom_meshtastic_architecture = esp32-s3
|
|
custom_meshtastic_actively_supported = true
|
|
custom_meshtastic_support_level = 1
|
|
custom_meshtastic_display_name = Meshnology W10
|
|
custom_meshtastic_images = meshnology_w10.svg
|
|
custom_meshtastic_tags = Meshnology
|
|
custom_meshtastic_requires_dfu = true
|
|
custom_meshtastic_partition_scheme = 16MB
|
|
|
|
; ESP32-S3R8: 8 MB OPI PSRAM, W25Q128JVSIQ = 16 MB QIO flash (pg1)
|
|
board = esp32-s3-devkitc-1
|
|
board_build.partitions = default_16MB.csv
|
|
board_upload.flash_size = 16MB
|
|
board_build.flash_mode = qio
|
|
board_build.psram_type = opi
|
|
board_build.arduino.memory_type = qio_opi
|
|
|
|
extends = esp32s3_base
|
|
board_level = release
|
|
build_flags =
|
|
${esp32s3_base.build_flags}
|
|
-D MESHNOLOGY_W10
|
|
-D ARDUINO_USB_CDC_ON_BOOT=1
|
|
-I variants/esp32s3/meshnology-w10
|
|
|
|
lib_deps =
|
|
${esp32s3_base.lib_deps}
|
|
; ST7789/ST7796 TFT (USE_TFTDISPLAY)
|
|
; renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
|
|
lovyan03/LovyanGFX@1.2.21
|
|
; PCF85063 RTC driver (PCF85063_RTC)
|
|
; renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
|
|
lewisxhe/SensorLib@0.3.4
|
|
; ES8311 audio codec + I2S notification tones (HAS_I2S)
|
|
; renovate: datasource=github-tags depName=pschatzmann_arduino-audio-driver packageName=pschatzmann/arduino-audio-driver
|
|
https://github.com/pschatzmann/arduino-audio-driver/archive/v0.3.0.zip
|
|
# renovate: datasource=git-refs depName=ESP8266Audio packageName=https://github.com/meshtastic/ESP8266Audio gitBranch=meshtastic-2.0.0-dacfix
|
|
https://github.com/meshtastic/ESP8266Audio/archive/343024632ee78d6216907b2353fc943a62422d80.zip
|
|
# renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
|
|
earlephilhower/ESP8266SAM@1.1.0
|