mirror of
https://github.com/alexhopeoconnor/firmware.git
synced 2026-10-21 18:52:36 +10:00
Ben Meadors
f6f116a39d
Audit of the custom_meshtastic_* manifest on the variants backing the newest boards, against the protobuf HardwareModel enum, the compiled HW_VENDOR, the board flash size and the artwork actually published by the web flasher. No support flag changes here - actively_supported is left exactly as each variant already had it. ThinkNode M9 had no HW_VENDOR arm, so every M9 has been reporting PRIVATE_HW while its manifest advertised 131; add the mapping and rename the slug to the enum name (THINKNODE_M9) it is meant to mirror. Seeed SenseCAP Mesh-Tracker X1 moves from the PR matrix to release, and its images entry now points at seeed_mesh_tracker_x1.svg, which is what the flasher actually ships - the hyphenated name resolved to nothing. T-Beam BPF, T-Beam 1W and Heltec Wireless Tracker V2 declared the architecture as "esp32s3"; the value is copied verbatim into the manifest, and the flash flow matches on the normalized "esp32-s3". T-Beam BPF and M5Stack Unit C6L both build default_16MB.csv on 16 MB flash but declared no partition scheme, which leaves the flasher on the 4 MB fallback offsets for a legacy clean install. Meshnology W10 and W12 gain the artwork and vendor tag that already exist for them.
29 lines
1.0 KiB
INI
29 lines
1.0 KiB
INI
; Meshnology W12 "WiFi LoRa 32 V5" - ESP32-S3R8 + LR2021 dual-band LoRa + SSD1315 OLED
|
|
; No MESHNOLOGY_W12 hardware model exists in the protobufs yet, so this reports PRIVATE_HW.
|
|
[env:meshnology_w12]
|
|
custom_meshtastic_hw_model = 255
|
|
custom_meshtastic_hw_model_slug = MESHNOLOGY_W12
|
|
custom_meshtastic_architecture = esp32-s3
|
|
custom_meshtastic_actively_supported = true
|
|
custom_meshtastic_support_level = 1
|
|
custom_meshtastic_display_name = Meshnology W12
|
|
custom_meshtastic_images = meshnology_w12.svg
|
|
custom_meshtastic_tags = Meshnology
|
|
custom_meshtastic_requires_dfu = true
|
|
custom_meshtastic_partition_scheme = 16MB
|
|
|
|
extends = esp32s3_base
|
|
board_level = release
|
|
board = esp32-s3-devkitc-1
|
|
; ESP32-S3R8: 8 MB OPI PSRAM, 16 MB QIO flash
|
|
board_build.partitions = default_16MB.csv
|
|
board_upload.flash_size = 16MB
|
|
board_build.flash_mode = qio
|
|
board_build.psram_type = opi
|
|
board_build.arduino.memory_type = qio_opi
|
|
build_flags =
|
|
${esp32s3_base.build_flags}
|
|
-D MESHNOLOGY_W12
|
|
-D ARDUINO_USB_CDC_ON_BOOT=1
|
|
-I variants/esp32s3/meshnology-w12
|