mirror of
https://github.com/alexhopeoconnor/firmware.git
synced 2026-10-04 03:18:10 +10:00
a541957480
* Migrate esp32 families to pioarduino platform
* ESP32c6 align text.handler_execute same as C3
* Use pioarduino `develop`
The latest fixes and the latest bugs!
* preliminary esp32p4.ini
* pioarduino: Update LovyanGFX
Includes Manuel's recent commit
* pioarduino 3.3.6
* pioarduino 3.3.6 *release*
chasing the release
* pioarduino: Fix OG ESP32 duplicate libs
* pioarduino: T-Beam 1W CDC mode
* pioarduino: disable network provisioning (wifiprov)
* pioarduino: use legacy esptoolpy naming (forward-compatible)
* Update lovyangfx from `develop` commit to 1.2.19
* fix esp32p4.ini
* check for esp32 w/ wifi
* esp32-p4 specific adaptations
* Switch to meshtastic/esp32_https_server fork (idf5 branch)
* don't ignore esp_lcd
* config for MUI
* fix/workaround SDMMC
* revert a6f6175, update to 3.3.8
* enable esp_hosted for esp32-p4 (experimental)
* Pioarduino 55.03.38-1
* NimBLE-Arduino -> Arduino "BLE" (3.3.x) migration (#10164)
* NimBLE-Arduino -> Arduino "BLE" (3.3.x) migration
* More NimBLE
* Fix Device Name in ATT Read Request (0x2A00).
Device Name is exposed in two places:
- Advertisement data: this is set properly in startAdvertising.
- GATT attribute Device Name (0x2A00). This one is handled internally in NimBLE
and comes from ble_svc_gap_device_name_set. This is set initially, but then
BLEDevice::createServer calls ble_svc_gap_init which resets the device name.
This causes the device to apparently "change name after pairing":
< ACL Data TX:... flags 0x00 dlen 7 #113 [hci0] 14.241149
ATT: Read Request (0x0a) len 2
Handle: 0x0003 Type: Device Name (0x2a00)
> ACL Data RX: Handle 2048 flags 0x02 dlen 11 #115 [hci0] 14.269050
ATT: Read Response (0x0b) len 6
Value[6]: 6e696d626c65 # "nimble"
Workaround this by setting the device name once again after
BLEDevice::createServer.
* Temporarily lower CORE_DEBUG_LEVEL to INFO to avoid triggering an apparent ESP-IDF Bluetooth bug when re-connecting to Pixel 8 Android devices.
Initial pairing works, but after ESP32 is rebooted, phone fails to reconnect. Meshtastic app shows it as disconnecting immediately. LightBlue shows a more detailed error "Peripheral Connection - Warning: onConnectionStatusChange: status 61" (0x3D - MIC Failure).
Bug report to Espresssif: https://github.com/espressif/esp-idf/issues/18126#issuecomment-4286197744
* Temporarily disable ble_gap_set_data_len, causes crash with Pixel 8 Android reconnect.
Crash looks like this:
[ 11966][E][BLEAdvertising.cpp:341] setScanResponseData(): ble_gap_adv_rsp_set_data: 22
[ 11975][E][BLEAdvertising.cpp:1554] start(): Host reset, wait for sync.
ERROR | ??:??:?? 11 BLE failed to start advertising
Guru Meditation Error: Core 0 panic'ed (LoadProhibited). Exception was unhandled.
Core 0 register dump:
PC : 0x420e6190 PS : 0x00060730 A0 : 0x820e158b A1 : 0x3fce50c0
A2 : 0x00000000 A3 : 0x3fcb8600 A4 : 0x3fcb85cc A5 : 0x00000000
A6 : 0x00000000 A7 : 0x00000c03 A8 : 0x00000000 A9 : 0x3fce50b0
A10 : 0x0000000e A11 : 0x00000000 A12 : 0x00000010 A13 : 0x3fce50e0
A14 : 0x00000c03 A15 : 0x00000001 SAR : 0x0000001e EXCCAUSE: 0x0000001c
EXCVADDR: 0x00000000 LBEG : 0x400570e8 LEND : 0x400570f3 LCOUNT : 0x00000000
Backtrace: 0x420e618d:0x3fce50c0 0x420e1588:0x3fce5110 0x420dfe87:0x3fce5200 0x420dfefb:0x3fce5220 0x420dff3f:0x3fce5240 0x4219602b:0x3fce5260 0x4037b0e5:0x3fce5280 0x4201edf3:0x3fce52a0
Connection seems fast enough even without this. We'll investigate the
reason for the crash and re-enable once it's safe.
---------
Co-authored-by: Catalin Patulea <cronos586@gmail.com>
* Add extension from pioarduino nag
"Jason2866.esp-decoder"
* Cleanup after merge
* ESP32: Disable classic bluetooth
* Cleanup: Fix ADC channels on new variants
* InkHUD: Fix type casting for message size in saveToFlash method
inkhud compiles again!
* update p4 esp_hosted for BT
* I thought I fixed this
* fix linker error using response file (p4 only)
* fix infinite loop
* Fix Power.cpp check warning
Local variable 'config' shadows outer variable [shadowVariable]
* Build ESP32 original with NimBLE ('custom_sdkconfig' approach). (#10235)
* Re-enable littlefs json manifest
This works locally again :)
Not sure what changed
* Re-add tool-mklittlefs
* sensecap indicator fixes after upgrade arduino-esp & lovyanGFX libs
* hackaday fix
* robot tbeam cache error fix
Co-authored-by: Copilot <copilot@github.com>
* trunk fmt
* ignore trunk
* BLEDevice::deinit() added
Co-authored-by: Copilot <copilot@github.com>
* platformio-custom: Modify mtjson target dependency to prevent fake-success. (#10291)
Co-authored-by: Copilot <copilot@github.com>
* Fix ESP32-C6 linker errors.
Align .text.handler_execute section to 4 bytes and update watchdog timer core mask configuration
Co-authored-by: Copilot <copilot@github.com>
* tlora-c6: Disable Screen
MESHTASTIC_EXCLUDE_SCREEN=1 on tlora-c6.
It doesn't have a screen, and this gets it compiling again (saving flash).
* Use mverch's iram_memset hack for all OG-ESP32
* Refactor watchdog timer initialization and handling
* use adc_channel_t in variant.h
* Fix variant headers
* More idiomatic default ethernet that doesn't break the build
* Elecrows: Delete problematic variant.cpp
Not needed after USE_ETHERNET_DEFAULT
---------
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
Co-authored-by: Catalin Patulea <cronos586@gmail.com>
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>
Co-authored-by: Copilot <copilot@github.com>
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
125 lines
3.0 KiB
C
125 lines
3.0 KiB
C
#include "pins_arduino.h"
|
|
|
|
// Display (E-Ink) ED047TC1 - 8bit parallel
|
|
#define EPD_WIDTH 960
|
|
#define EPD_HEIGHT 540
|
|
|
|
#define CANNED_MESSAGE_MODULE_ENABLE 1
|
|
#define USE_VIRTUAL_KEYBOARD 1
|
|
|
|
#if defined(T5_S3_EPAPER_PRO_V1)
|
|
#define BOARD_BL_EN 40
|
|
#else
|
|
#define BOARD_BL_EN 11
|
|
#endif
|
|
|
|
#define I2C_SDA SDA
|
|
#define I2C_SCL SCL
|
|
|
|
#define HAS_TOUCHSCREEN 1
|
|
#define TOUCH_POLL_INTERVAL_IDLE 25
|
|
#define TOUCH_POLL_INTERVAL_ACTIVE 15
|
|
#define TOUCH_POLL_INTERVAL_RELEASE 20
|
|
#define TOUCH_POLL_INTERVAL_ACTIVE_FAST 8
|
|
#define TOUCH_POLL_INTERVAL_RELEASE_FAST 8
|
|
#define GT911_PIN_SDA SDA
|
|
#define GT911_PIN_SCL SCL
|
|
#if defined(T5_S3_EPAPER_PRO_V1)
|
|
#define GT911_PIN_INT 15
|
|
#define GT911_PIN_RST 41
|
|
#else
|
|
#define GT911_PIN_INT 3
|
|
#define GT911_PIN_RST 9
|
|
#endif
|
|
// Do not use touch as a light-sleep wake source on T5-S3.
|
|
// Wake should come from physical buttons/radio/timer only.
|
|
#define SCREEN_TOUCH_INT GT911_PIN_INT
|
|
|
|
// Touch control helpers for this variant
|
|
bool isTouchInputEnabled();
|
|
void setTouchInputEnabled(bool enabled, bool showIndicator);
|
|
void toggleTouchInputEnabled();
|
|
|
|
// Backlight control helpers for this variant (non-latching behavior)
|
|
void t5BacklightSetUserEnabled(bool enabled);
|
|
bool t5BacklightIsUserEnabled();
|
|
void t5BacklightToggleUser();
|
|
void t5BacklightSetForcedByTimeout(bool forced);
|
|
void t5BacklightSetForcedBySleep(bool forced);
|
|
void t5BacklightHandleUserInput();
|
|
|
|
// Touch timeout/wake helpers for this variant
|
|
void t5TouchSetForcedByTimeout(bool forced);
|
|
bool t5TouchIsForcedByTimeout();
|
|
void t5TouchHandleUserInput();
|
|
|
|
// Gate GT911 capacitive-home callback delivery until InkHUD startup is complete.
|
|
void t5SetHomeCapButtonEventsEnabled(bool enabled);
|
|
|
|
#define PCF8563_RTC 0x51
|
|
#define HAS_RTC 1
|
|
#define PCF8563_INT 2
|
|
|
|
#define USE_POWERSAVE
|
|
#define SLEEP_TIME 120
|
|
|
|
// GPS
|
|
#if !defined(T5_S3_EPAPER_PRO_V1)
|
|
#define GPS_RX_PIN 44
|
|
#define GPS_TX_PIN 43
|
|
#endif
|
|
|
|
#if defined(T5_S3_EPAPER_PRO_V1)
|
|
#define BUTTON_PIN 48
|
|
#define PIN_BUTTON2 0
|
|
#define ALT_BUTTON_PIN PIN_BUTTON2
|
|
#else
|
|
#define BUTTON_PIN 0
|
|
#define BOARD_PCA9535_ADDR 0x20
|
|
#define BOARD_PCA9535_INT 38
|
|
#define BOARD_PCA9535_BUTTON_MASK 0x04
|
|
#endif
|
|
// SD card
|
|
#define HAS_SDCARD
|
|
#define SDCARD_CS SPI_CS
|
|
#define SD_SPI_FREQUENCY 75000000U
|
|
|
|
// battery charger BQ25896
|
|
#define HAS_PPM 1
|
|
#define XPOWERS_CHIP_BQ25896
|
|
|
|
// battery quality management BQ27220
|
|
#define HAS_BQ27220 1
|
|
#define BQ27220_I2C_SDA SDA
|
|
#define BQ27220_I2C_SCL SCL
|
|
#define BQ27220_DESIGN_CAPACITY 1500
|
|
|
|
// LoRa
|
|
#define USE_SX1262
|
|
#define USE_SX1268
|
|
|
|
#define LORA_SCK SCK
|
|
#define LORA_MISO MISO
|
|
#define LORA_MOSI MOSI
|
|
#define LORA_CS 46
|
|
|
|
#define LORA_DIO0 -1
|
|
#if defined(T5_S3_EPAPER_PRO_V1)
|
|
#define LORA_RESET 43
|
|
#define LORA_DIO1 3 // SX1262 IRQ
|
|
#define LORA_DIO2 44 // SX1262 BUSY
|
|
#define LORA_DIO3
|
|
#else
|
|
#define LORA_RESET 1
|
|
#define LORA_DIO1 10 // SX1262 IRQ
|
|
#define LORA_DIO2 47 // SX1262 BUSY
|
|
#define LORA_DIO3
|
|
#endif
|
|
|
|
#define SX126X_CS LORA_CS
|
|
#define SX126X_DIO1 LORA_DIO1
|
|
#define SX126X_BUSY LORA_DIO2
|
|
#define SX126X_RESET LORA_RESET
|
|
#define SX126X_DIO2_AS_RF_SWITCH
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 2.4
|