Use const references and local context

Implement batched NodeInfo encoding for more efficient large NodeDB transfer
feat: add new configuration files for LR11xx variants (#9761 )
2026-10-08 05:00:05 +10:00 · 2026-04-03 06:18:24 -05:00 · 2026-04-02 14:19:50 -05:00 · 2026-04-01 10:46:27 +11:00 · 2026-03-31 07:53:59 -05:00 · 2026-03-30 14:37:29 -05:00
335 changed files with 11656 additions and 4863 deletions
@@ -100,7 +100,7 @@ runs:
      id: version

    - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v6
+      uses: actions/upload-artifact@v7
      with:
        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}
        overwrite: true
@@ -8,8 +8,6 @@ runs:
      uses: actions/checkout@v6
      with:
        submodules: recursive
-        ref: ${{github.event.pull_request.head.ref}}
-        repository: ${{github.event.pull_request.head.repo.full_name}}

    - name: Install dependencies
      shell: bash
@@ -4,16 +4,16 @@

 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
  to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
-  is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
+  is appreciated." This will allow other devs to potentially save you time by not accidentally duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the linux version),
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the Linux version),
  because it automatically follows our indentation rules and its auto reformatting will not cause spurious changes to lines.
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
 - Please also enable "Allow edits by maintainers".
 - Please do not submit untested code.
- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and commnunity members can help test your changes.
+- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and community members can help test your changes.
 - If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord

 ## 🤝 Attestations
@@ -16,8 +16,7 @@ on:
        type: string

 permissions:
-  contents: write
-  packages: write
+  contents: read

 jobs:
  build-debian-src:
@@ -28,8 +27,6 @@ jobs:
        with:
          submodules: recursive
          path: meshtasticd
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Install deps
        shell: bash
@@ -42,7 +39,8 @@ jobs:
          sudo mk-build-deps --install --remove --tool='apt-get -o Debug::pkgProblemResolver=yes --no-install-recommends --yes' debian/control

      - name: Import GPG key
-        uses: crazy-max/ghaction-import-gpg@v6
+        if: github.event_name != 'pull_request' && github.event_name != 'pull_request_target'
+        uses: crazy-max/ghaction-import-gpg@v7
        with:
          gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
        id: gpg
@@ -60,11 +58,11 @@ jobs:
        run: debian/ci_pack_sdeb.sh
        env:
          SERIES: ${{ inputs.series }}
-          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid }}
+          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid || '' }}
          PKG_VERSION: ${{ steps.version.outputs.deb }}

      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v7
        with:
          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
          overwrite: true
@@ -26,8 +26,6 @@ jobs:
      - uses: actions/checkout@v6
        with:
          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Build ${{ inputs.platform }}
        id: build
@@ -111,7 +109,7 @@ jobs:
          echo "</details>" >> $GITHUB_STEP_SUMMARY

      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v7
        id: upload-firmware
        with:
          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
@@ -127,7 +125,7 @@ jobs:
            release/device-*.bat

      - name: Store manifests as an artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v7
        id: upload-manifest
        with:
          name: manifest-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
@@ -4,9 +4,14 @@ on:
  workflow_dispatch:
    inputs:
      # trunk-ignore(checkov/CKV_GHA_7)
+      target:
+        type: string
+        required: false
+        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
      arch:
        type: choice
        options:
+          - all
          - esp32
          - esp32s3
          - esp32c3
@@ -15,32 +20,18 @@ on:
          - rp2040
          - rp2350
          - stm32
-      target:
-        type: string
-        required: false
-        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
-      # find-target:
-      #   type: boolean
-      #   default: true
-      #   description: 'Find the available targets'
+        description: Choose an arch to limit the search, or 'all' to search all architectures.
+        default: all

 permissions: read-all

 jobs:
  find-targets:
-    if: ${{ inputs.target == '' }}
    strategy:
      fail-fast: false
      matrix:
        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
+          - all
    runs-on: ubuntu-24.04
    steps:
      - uses: actions/checkout@v6
@@ -51,14 +42,37 @@ jobs:
      - run: pip install -U platformio
      - name: Generate matrix
        id: jsonStep
+        env:
+          BUILDTARGET: ${{ inputs.target }}
+          MATRIXARCH: ${{ inputs.arch }}
        run: |
          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level extra)
-          echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
-          echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
-          echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
-          echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
-          echo "Targets:" >> $GITHUB_STEP_SUMMARY
-          echo $TARGETS | jq -r 'sort_by(.board) |.[] | "- " + .board' >> $GITHUB_STEP_SUMMARY
+          if [ "$BUILDTARGET" = "" ]; then
+            echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
+            echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
+            echo "Arch: $MATRIXARCH" >> $GITHUB_STEP_SUMMARY
+            echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
+            echo "## 🎯 The following target boards are available to build:" >> $GITHUB_STEP_SUMMARY
+            echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
+            echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
+            echo $TARGETS | jq -r 'sort_by(.board) | sort_by(.platform) |.[] | "| " + .platform + " | " + .board + " |" ' >> $GITHUB_STEP_SUMMARY
+          else
+            echo "We build this one:" >> $GITHUB_STEP_SUMMARY
+            ARCH=$(echo "$TARGETS" | jq --arg BUILDTARGET "$BUILDTARGET" -r '.[] | select(.board==$BUILDTARGET) | .platform')
+            echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
+            echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
+            echo "| $ARCH | "$BUILDTARGET" |" >> $GITHUB_STEP_SUMMARY
+            echo "" >> $GITHUB_STEP_SUMMARY
+            if [[ "$ARCH" == "" ]]; then
+              echo "## ❌ Error: Target "$BUILDTARGET" not found!" >> $GITHUB_STEP_SUMMARY
+            else
+              echo "## ✅ Target "$BUILDTARGET" found, proceeding to build." >> $GITHUB_STEP_SUMMARY
+            fi
+            echo "You may need to refresh this page to make the built firmware appear below." >> $GITHUB_STEP_SUMMARY
+            echo "arch=$ARCH" >> $GITHUB_OUTPUT
+          fi
+    outputs:
+      arch: ${{ steps.jsonStep.outputs.arch }}

  version:
    if: ${{ inputs.target != '' }}
@@ -78,16 +92,16 @@ jobs:

  build:
    if: ${{ inputs.target != '' && inputs.arch != 'native' }}
-    needs: [version]
+    needs: [version, find-targets]
    uses: ./.github/workflows/build_firmware.yml
    with:
      version: ${{ needs.version.outputs.long }}
      pio_env: ${{ inputs.target }}
-      platform: ${{ inputs.arch }}
+      platform: ${{ needs.find-targets.outputs.arch }}

  gather-artifacts:
    permissions:
-      contents: write
+      contents: read
      pull-requests: write
    runs-on: ubuntu-latest
    needs: [version, build]
@@ -98,7 +112,7 @@ jobs:
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}

-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v8
        with:
          path: ./
          pattern: firmware-*-*
@@ -111,7 +125,7 @@ jobs:
        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat

      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v7
        with:
          name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
          overwrite: true
@@ -127,7 +141,7 @@ jobs:
            ./Meshtastic_nRF52_factory_erase*.uf2
          retention-days: 30

-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v8
        with:
          pattern: firmware-*-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -146,7 +160,7 @@ jobs:
        run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output

      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v7
        with:
          name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
          overwrite: true
@@ -5,7 +5,7 @@ on:
  workflow_dispatch:
  push:
    branches:
-      - master
+      - develop # Default branch, same as 'cron' above
    paths:
      - debian/**
      - "*.rpkg"
@@ -16,7 +16,7 @@ on:
      - .github/workflows/hook_copr.yml

 permissions:
-  contents: write
+  contents: read
  packages: write

 jobs:
@@ -35,8 +35,8 @@ jobs:
        series:
          - jammy # 22.04 LTS
          - noble # 24.04 LTS
-          - plucky # 25.04
          - questing # 25.10
+          - resolute # 26.04 LTS
    uses: ./.github/workflows/package_ppa.yml
    with:
      ppa_repo: ppa:meshtastic/daily
@@ -37,7 +37,7 @@ on:
        value: ${{ jobs.docker-build.outputs.digest }}

 permissions:
-  contents: write
+  contents: read
  packages: write

 jobs:
@@ -50,8 +50,6 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Get release version string
        run: |
@@ -60,16 +58,16 @@ jobs:

      - name: Docker login
        if: ${{ inputs.push }}
-        uses: docker/login-action@v3
+        uses: docker/login-action@v4
        with:
          username: meshtastic
          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}

      - name: Set up QEMU
-        uses: docker/setup-qemu-action@v3
+        uses: docker/setup-qemu-action@v4

      - name: Docker setup
-        uses: docker/setup-buildx-action@v3
+        uses: docker/setup-buildx-action@v4

      - name: Sanitize platform string
        id: sanitize_platform
@@ -78,7 +76,7 @@ jobs:

      - name: Docker tag
        id: meta
-        uses: docker/metadata-action@v5
+        uses: docker/metadata-action@v6
        with:
          images: meshtastic/meshtasticd
          tags: |
@@ -86,7 +84,7 @@ jobs:
          flavor: latest=false

      - name: Docker build and push
-        uses: docker/build-push-action@v6
+        uses: docker/build-push-action@v7
        id: docker_variant
        with:
          context: .
@@ -12,7 +12,7 @@ on:
        type: string

 permissions:
-  contents: write
+  contents: read
  packages: write

 jobs:
@@ -86,8 +86,6 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Get release version string
        run: |
@@ -139,14 +137,14 @@ jobs:
        id: tags

      - name: Docker login
-        uses: docker/login-action@v3
+        uses: docker/login-action@v4
        with:
          username: meshtastic
          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}

      - name: Docker meta (Debian)
        id: meta_debian
-        uses: docker/metadata-action@v5
+        uses: docker/metadata-action@v6
        with:
          images: meshtastic/meshtasticd
          tags: |
@@ -167,7 +165,7 @@ jobs:

      - name: Docker meta (Alpine)
        id: meta_alpine
-        uses: docker/metadata-action@v5
+        uses: docker/metadata-action@v6
        with:
          images: meshtastic/meshtasticd
          tags: |
@@ -11,8 +11,7 @@ on:
        type: string

 permissions:
-  contents: write
-  packages: write
+  contents: read

 jobs:
  build-copr-hook:
@@ -22,8 +21,6 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
-          ref: ${{ github.ref }}
-          repository: ${{ github.repository }}

      - name: Trigger COPR build
        uses: vidplace7/copr-build@main
@@ -15,8 +15,7 @@ on:
      - "**.md"
      - version.properties

-  # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
-  pull_request_target:
+  pull_request:
    branches:
      - master
      - develop
@@ -29,6 +28,8 @@ on:

  workflow_dispatch:

+permissions: read-all
+
 jobs:
  setup:
    strategy:
@@ -88,8 +89,6 @@ jobs:
      - uses: actions/checkout@v6
        with:
          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
      - name: Check ${{ matrix.check.board }}
        uses: meshtastic/gh-action-firmware@main
        with:
@@ -126,9 +125,16 @@ jobs:

  test-native:
    if: ${{ !contains(github.ref_name, 'event/') && github.repository == 'meshtastic/firmware' }}
+    permissions: # Needed for dorny/test-reporter.
+      contents: read
+      actions: read
+      checks: write
    uses: ./.github/workflows/test_native.yml

  docker:
+    permissions: # Needed for pushing to GHCR.
+      contents: read
+      packages: write
    strategy:
      fail-fast: false
      matrix:
@@ -153,9 +159,6 @@ jobs:
  gather-artifacts:
    # trunk-ignore(checkov/CKV2_GHA_1)
    if: github.repository == 'meshtastic/firmware'
-    permissions:
-      contents: write
-      pull-requests: write
    strategy:
      fail-fast: false
      matrix:
@@ -173,11 +176,8 @@ jobs:
    steps:
      - name: Checkout code
        uses: actions/checkout@v6
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v8
        with:
          path: ./
          pattern: firmware-${{matrix.arch}}-*
@@ -187,7 +187,7 @@ jobs:
        run: ls -R

      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v7
        with:
          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          overwrite: true
@@ -205,7 +205,7 @@ jobs:
            ./Meshtastic_nRF52_factory_erase*.uf2
          retention-days: 30

-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v8
        with:
          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -224,20 +224,13 @@ jobs:
        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output

      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v7
        with:
          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
          overwrite: true
          path: ./*.elf
          retention-days: 30

-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-
  shame:
    if: github.repository == 'meshtastic/firmware'
    continue-on-error: true
@@ -245,42 +238,44 @@ jobs:
    needs: [build]
    steps:
      - uses: actions/checkout@v6
-        if: github.event_name == 'pull_request_target'
+        if: github.event_name == 'pull_request'
        with:
          filter: blob:none # means we download all the git history but none of the commit (except ones with checkout like the head)
          fetch-depth: 0
      - name: Download the current manifests
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v8
        with:
          path: ./manifests-new/
          pattern: manifest-*
          merge-multiple: true
      - name: Upload combined manifests for later commit and global stats crunching.
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v7
        id: upload-manifest
        with:
          name: manifests-${{ github.sha }}
          overwrite: true
          path: manifests-new/*.mt.json
      - name: Find the merge base
-        if: github.event_name == 'pull_request_target'
+        if: github.event_name == 'pull_request'
        run: echo "MERGE_BASE=$(git merge-base "origin/$base" "$head")" >> $GITHUB_ENV
        env:
          base: ${{ github.base_ref }}
          head: ${{ github.sha }}
      # Currently broken (for-loop through EVERY artifact -- rate limiting)
      # - name: Download the old manifests
-      #   if: github.event_name == 'pull_request_target'
+      #   if: github.event_name == 'pull_request'
      #   run: gh run download -R "$repo" --name "manifests-$merge_base" --dir manifest-old/
      #   env:
      #     GH_TOKEN: ${{ github.token }}
      #     merge_base: ${{ env.MERGE_BASE }}
      #     repo: ${{ github.repository }}
      # - name: Do scan and post comment
-      #   if: github.event_name == 'pull_request_target'
+      #   if: github.event_name == 'pull_request'
      #   run: python3 bin/shame.py ${{ github.event.pull_request.number }} manifests-old/ manifests-new/

  release-artifacts:
+    permissions: # Needed for 'gh release upload'.
+      contents: write
    runs-on: ubuntu-latest
    if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
    outputs:
@@ -324,14 +319,14 @@ jobs:
          body: ${{ steps.release_notes.outputs.notes }}

      - name: Download source deb
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v8
        with:
          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
          merge-multiple: true
          path: ./output/debian-src

      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v8
        with:
          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -355,7 +350,7 @@ jobs:
          }' > firmware-${{ needs.version.outputs.long }}.json

      - name: Save Release manifest artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v7
        with:
          name: manifest-${{ needs.version.outputs.long }}
          overwrite: true
@@ -372,6 +367,8 @@ jobs:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

  release-firmware:
+    permissions: # Needed for 'gh release upload'.
+      contents: write
    strategy:
      fail-fast: false
      matrix:
@@ -396,7 +393,7 @@ jobs:
        with:
          python-version: 3.x

-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v8
        with:
          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -413,7 +410,7 @@ jobs:
      - name: Zip firmware
        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output

-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v8
        with:
          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -454,14 +451,14 @@ jobs:
          python-version: 3.x

      - name: Get firmware artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v8
        with:
          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
          merge-multiple: true
          path: ./publish

      - name: Get manifest artifact
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v8
        with:
          pattern: manifest-${{ needs.version.outputs.long }}
          path: ./publish
@@ -1,371 +0,0 @@
-name: Merge Queue
-# Not sure how concurrency works in merge_queue, removing for now.
-# concurrency:
-#   group: merge-queue-${{ github.head_ref || github.run_id }}
-#   cancel-in-progress: true
-on:
-  # Merge group is a special trigger that is used to trigger the workflow when a merge group is created.
-  merge_group:
-
-jobs:
-  setup:
-    strategy:
-      fail-fast: true
-      matrix:
-        arch:
-          - all
-          - check
-    runs-on: ubuntu-24.04
-    steps:
-      - uses: actions/checkout@v6
-      - uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-          cache: pip
-      - run: pip install -U platformio
-      - name: Generate matrix
-        id: jsonStep
-        run: |
-          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
-          else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level pr)
-          fi
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
-          echo "${{matrix.arch}}=$TARGETS" >> $GITHUB_OUTPUT
-    outputs:
-      all: ${{ steps.jsonStep.outputs.all }}
-      check: ${{ steps.jsonStep.outputs.check }}
-
-  version:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v6
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-    outputs:
-      long: ${{ steps.version.outputs.long }}
-      deb: ${{ steps.version.outputs.deb }}
-
-  check:
-    needs: setup
-    strategy:
-      fail-fast: true
-      matrix:
-        check: ${{ fromJson(needs.setup.outputs.check) }}
-
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
-    steps:
-      - uses: actions/checkout@v6
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
-      - name: Check ${{ matrix.check.board }}
-        run: bin/check-all.sh ${{ matrix.check.board }}
-
-  build:
-    needs: [setup, version]
-    strategy:
-      matrix:
-        build: ${{ fromJson(needs.setup.outputs.all) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.build.board }}
-      platform: ${{ matrix.build.platform }}
-
-  build-debian-src:
-    if: github.repository == 'meshtastic/firmware'
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  package-pio-deps-native-tft:
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    uses: ./.github/workflows/package_pio_deps.yml
-    with:
-      pio_env: native-tft
-    secrets: inherit
-
-  test-native:
-    if: ${{ !contains(github.ref_name, 'event/') }}
-    uses: ./.github/workflows/test_native.yml
-
-  docker:
-    strategy:
-      fail-fast: false
-      matrix:
-        distro: [debian, alpine]
-        platform: [linux/amd64, linux/arm64, linux/arm/v7]
-        pio_env: [native, native-tft]
-        exclude:
-          - distro: alpine
-            platform: linux/arm/v7
-          - pio_env: native-tft
-            platform: linux/arm64
-          - pio_env: native-tft
-            platform: linux/arm/v7
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: ${{ matrix.distro }}
-      platform: ${{ matrix.platform }}
-      runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
-      pio_env: ${{ matrix.pio_env }}
-      push: false
-
-  gather-artifacts:
-    # trunk-ignore(checkov/CKV2_GHA_1)
-    permissions:
-      contents: write
-      pull-requests: write
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    needs: [version, build]
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v6
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - uses: actions/download-artifact@v7
-        with:
-          path: ./
-          pattern: firmware-${{matrix.arch}}-*
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -R
-
-      - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
-
-      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v6
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: |
-            ./firmware-*.bin
-            ./firmware-*.uf2
-            ./firmware-*.hex
-            ./firmware-*.zip
-            ./device-*.sh
-            ./device-*.bat
-            ./littlefs-*.bin
-            ./bleota*bin
-            ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
-
-      - uses: actions/download-artifact@v7
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      # For diagnostics
-      - name: Show artifacts
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v6
-        with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: ./*.elf
-          retention-days: 30
-
-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-
-  release-artifacts:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    outputs:
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs:
-      - version
-      - gather-artifacts
-      - build-debian-src
-      - package-pio-deps-native-tft
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-
-      - name: Create release
-        uses: softprops/action-gh-release@v2
-        id: create_release
-        with:
-          draft: true
-          prerelease: true
-          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
-          tag_name: v${{ needs.version.outputs.long }}
-          body: |
-            Autogenerated by github action, developer should edit as required before publishing...
-
-      - name: Download source deb
-        uses: actions/download-artifact@v7
-        with:
-          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
-          merge-multiple: true
-          path: ./output/debian-src
-
-      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v7
-        with:
-          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output/pio-deps-native-tft
-
-      - name: Zip Linux sources
-        working-directory: output
-        run: |
-          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add Linux sources to GtiHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
-          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  release-firmware:
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts, version]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v7
-        with:
-          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - uses: actions/download-artifact@v7
-        with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add bins and debug elfs to GitHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  publish-firmware:
-    runs-on: ubuntu-24.04
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-firmware, version]
-    env:
-      targets: |-
-        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v7
-        with:
-          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./publish
-
-      - name: Publish firmware to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        env:
-          # On event/* branches, use the event name as the destination prefix
-          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
-          keep_files: true
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ needs.version.outputs.long }}
-          enable_jekyll: true
@@ -18,8 +18,7 @@ on:
        type: string

 permissions:
-  contents: write
-  packages: write
+  contents: read

 jobs:
  build-debian-src:
@@ -58,7 +57,7 @@ jobs:
        id: version

      - name: Download artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v8
        with:
          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
          merge-multiple: true
@@ -16,8 +16,7 @@ on:
        type: string

 permissions:
-  contents: write
-  packages: write
+  contents: read

 jobs:
  pkg-pio-libdeps:
@@ -27,8 +26,6 @@ jobs:
        uses: actions/checkout@v6
        with:
          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Setup Python
        uses: actions/setup-python@v6
@@ -54,9 +51,19 @@ jobs:
          PLATFORMIO_LIBDEPS_DIR: pio/libdeps
          PLATFORMIO_PACKAGES_DIR: pio/packages
          PLATFORMIO_CORE_DIR: pio/core
+          PLATFORMIO_SETTING_ENABLE_TELEMETRY: 0
+          PLATFORMIO_SETTING_CHECK_PLATFORMIO_INTERVAL: 3650
+          PLATFORMIO_SETTING_CHECK_PRUNE_SYSTEM_THRESHOLD: 10240
+
+      - name: Mangle platformio cache
+        # Add "1" to epoch-timestamps of all downloads in the cache.
+        # This is a hack to prevent internet access at build-time.
+        run: |
+          cp pio/core/.cache/downloads/usage.db pio/core/.cache/downloads/usage.db.bak
+          jq -c 'with_entries(.value |= (. | tostring + "1" | tonumber))' pio/core/.cache/downloads/usage.db.bak > pio/core/.cache/downloads/usage.db

      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v7
        with:
          name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
          overwrite: true
@@ -16,8 +16,7 @@ on:
        type: string

 permissions:
-  contents: write
-  packages: write
+  contents: read

 jobs:
  build-debian-src:
@@ -36,8 +35,6 @@ jobs:
        with:
          submodules: recursive
          path: meshtasticd
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Install deps
        shell: bash
@@ -46,7 +43,7 @@ jobs:
          sudo apt-get install -y dput

      - name: Import GPG key
-        uses: crazy-max/ghaction-import-gpg@v6
+        uses: crazy-max/ghaction-import-gpg@v7
        with:
          gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
        id: gpg
@@ -60,7 +57,7 @@ jobs:
        id: version

      - name: Download artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v8
        with:
          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
          merge-multiple: true
@@ -70,5 +67,6 @@ jobs:

      - name: Publish with dput
        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        timeout-minutes: 15 # dput is terrible, sometimes runs 'forever'
        run: |
          dput ${{ inputs.ppa_repo }} meshtasticd_${{ steps.version.outputs.deb }}~${{ inputs.series }}_source.changes
@@ -50,7 +50,7 @@ jobs:

      - name: Download test artifacts
        if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v8
        with:
          name: platformio-test-report-${{ steps.version.outputs.long }}
          merge-multiple: true
@@ -23,8 +23,8 @@ jobs:
        series:
          - jammy # 22.04 LTS
          - noble # 24.04 LTS
-          - plucky # 25.04
          - questing # 25.10
+          - resolute # 26.04 LTS
    uses: ./.github/workflows/package_ppa.yml
    with:
      ppa_repo: |-
@@ -33,7 +33,7 @@ jobs:

      # step 3
      - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v7
        with:
          name: report.sarif
          overwrite: true
@@ -16,8 +16,6 @@ jobs:
    steps:
      - uses: actions/checkout@v6
        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
          submodules: recursive

      - name: Setup native build
@@ -59,7 +57,7 @@ jobs:
        id: version

      - name: Save coverage information
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v7
        if: always() # run this step even if previous step failed
        with:
          name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}
@@ -72,8 +70,6 @@ jobs:
    steps:
      - uses: actions/checkout@v6
        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
          submodules: recursive

      - name: Setup native build
@@ -94,7 +90,7 @@ jobs:

      - name: Save test results
        if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v7
        with:
          name: platformio-test-report-${{ steps.version.outputs.long }}
          overwrite: true
@@ -108,7 +104,7 @@ jobs:
          sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.

      - name: Save coverage information
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v7
        if: always() # run this step even if previous step failed
        with:
          name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}
@@ -128,29 +124,26 @@ jobs:
    if: always()
    steps:
      - uses: actions/checkout@v6
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}

      - name: Get release version string
        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
        id: version

      - name: Download test artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v8
        with:
          name: platformio-test-report-${{ steps.version.outputs.long }}
          merge-multiple: true

      - name: Test Report
-        uses: dorny/test-reporter@v2.5.0
+        uses: dorny/test-reporter@v3.0.0
        with:
          name: PlatformIO Tests
          path: testreport.xml
          reporter: java-junit

      - name: Download coverage artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v8
        with:
          pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}
          path: code-coverage-report
@@ -163,7 +156,7 @@ jobs:
          genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report

      - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v7
        with:
          name: code-coverage-report-${{ steps.version.outputs.long }}
          path: code-coverage-report
@@ -52,7 +52,7 @@ jobs:
          node-version: 24

      - name: Setup pnpm
-        uses: pnpm/action-setup@v4
+        uses: pnpm/action-setup@v5
        with:
          version: latest

@@ -6,7 +6,7 @@ permissions: read-all
 jobs:
  update-protobufs:
    runs-on: ubuntu-latest
-    permissions:
+    permissions: # Needed for peter-evans/create-pull-request.
      contents: write
      pull-requests: write
    steps:
@@ -4,31 +4,31 @@ cli:
 plugins:
  sources:
    - id: trunk
-      ref: v1.7.4
+      ref: v1.7.6
      uri: https://github.com/trunk-io/plugins
 lint:
  enabled:
-    - checkov@3.2.506
-    - renovate@43.43.2
+    - checkov@3.2.513
+    - renovate@43.100.0
    - prettier@3.8.1
-    - trufflehog@3.93.5
+    - trufflehog@3.94.1
    - yamllint@1.38.0
    - bandit@1.9.4
-    - trivy@0.69.1
+    - trivy@0.69.3
    - taplo@0.10.0
-    - ruff@0.15.4
-    - isort@8.0.0
-    - markdownlint@0.47.0
+    - ruff@0.15.8
+    - isort@8.0.1
+    - markdownlint@0.48.0
    - oxipng@10.1.0
-    - svgo@4.0.0
+    - svgo@4.0.1
    - actionlint@1.7.11
    - flake8@7.3.0
    - hadolint@2.14.0
    - shfmt@3.6.0
    - shellcheck@0.11.0
-    - black@26.1.0
+    - black@26.3.1
    - git-diff-check
-    - gitleaks@8.30.0
+    - gitleaks@8.30.1
    - clang-format@16.0.3
  ignore:
    - linters: [ALL]
@@ -187,6 +187,7 @@ Logging:
  LogLevel: info # debug, info, warn, error
 #  TraceFile: /var/log/meshtasticd.json
 #  JSONFile: /packets.json # File location for JSON output of decoded packets
+#  JSONFileRotate: 60 # Rotate JSON file every N minutes, or 0 for no rotation
 #  JSONFilter: position # filter for packets to save to JSON file
 #  AsciiLogs: true     # default if not specified is !isatty() on stdout

@@ -214,3 +215,4 @@ General:
  AvailableDirectory: /etc/meshtasticd/available.d/
 #  MACAddress: AA:BB:CC:DD:EE:FF
 #  MACAddressSource: eth0
+#  APIPort: 4403
@@ -1,3 +1,9 @@
+Meta:
+  name: BananaPi-BPI-R4-sx1262
+  support: community
+  compatible:
+    - bananapi_bpi-r4 # OpenWrt target
+
 Lora:
  Module: sx1262  # BananaPi-BPI-R4 SPI via 26p GPIO Header
 ##  CS: 28
@@ -1,4 +1,10 @@
 ##  https://www.mikroe.com/lr-iot-click
+Meta:
+  name: OpenWRT One mikroBUS LR-IOT-CLICK
+  support: community
+  compatible:
+    - openwrt_one # OpenWrt target
+
 Lora:
  Module: lr1110  # OpenWRT ONE mikroBUS with LR-IOT-CLICK
 #  CS: 25
@@ -1,3 +1,9 @@
+Meta:
+  name: OpenWRT One mikroBUS sx1262
+  support: community
+  compatible:
+    - openwrt_one # OpenWrt target
+
 Lora:
  Module: sx1262
  IRQ: 10
@@ -0,0 +1,28 @@
+# meshtasticd configuration files
+
+This directory contains YAML configuration files for meshtasticd. Each file describes a specific hardware configuration, including the LoRa module and pin assignments. These configurations are used by meshtasticd to correctly interface with the hardware.
+
+## Metadata structure
+
+Each configuration file includes a `Meta` section that provides information about the configuration.
+This configuration is consumed by configuration-selection tools.
+
+```yaml
+Meta:
+  name: MeshAdv-Pi E22-900M30S # A unique identifier for this configuration.
+  support: community # community, official, or deprecated; determined by Meshtastic Leads.
+  compatible: # A list of compatible products or platforms.
+    - raspberry-pi
+```
+`name`: A unique identifier for the configuration, typically reflecting the hardware it supports.
+
+`support`: Indicates the level of support for this configuration. It can be one of the following:
+
+- `community`: Supported by the Meshtastic community. Meshtastic Members may not possess, or have not tested this configuration.
+- `official`: Fully supported by Meshtastic. Meshtastic Members have tested and verified this configuration.
+- `deprecated`: No longer recommended for deployment by Meshtastic.
+
+`compatible`: A list of compatible products or platforms that can use this configuration.
+This will vary depending on the intended use case / platform.
+Multiple compatible entries can be included. E.g. Armbian `BOARD` value or OpenWrt `TARGET` value.
+These tags can be consumed by different configuration-selection tools, filtering based upon their platform/etc.
@@ -1,3 +1,9 @@
+Meta:
+  name: Waveshare 1.44inch LCD HAT
+  support: community
+  compatible:
+    - raspberry-pi
+
 ### Waveshare 1.44inch LCD HAT
 Display:
  Panel: ST7735S
@@ -1,3 +1,9 @@
+Meta:
+  name: Waveshare 2.8inch LCD HAT
+  support: community
+  compatible:
+    - raspberry-pi
+
 Display:

 ### Waveshare 2.8inch RPi LCD
@@ -0,0 +1,30 @@
+---
+Lora:
+## Ebyte E80-900M22S
+## This is a bit experimental
+## 
+##
+  Module: lr1121
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO3_TCXO_VOLTAGE: 1.8
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+
+
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+rfswitch_table:
+  pins: [DIO5, DIO6, DIO7]
+  MODE_STBY: [LOW, LOW, LOW]
+  MODE_RX: [LOW, HIGH, LOW]
+  MODE_TX: [HIGH, HIGH, LOW]
+  MODE_TX_HP: [HIGH, LOW, LOW]
+  MODE_TX_HF: [LOW, LOW, LOW]
+  MODE_GNSS: [LOW, LOW, HIGH]
+  MODE_WIFI: [LOW, LOW, LOW]
+
+General:
+  MACAddressSource: eth0
@@ -0,0 +1,46 @@
+---
+Lora:
+## Ebyte E80-900M22S
+## This is a bit experimental
+## 
+##
+  Module: lr1121
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO3_TCXO_VOLTAGE: 1.8
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+
+
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+rfswitch_table:
+  pins:
+    - DIO5
+    - DIO6
+  MODE_STBY:
+    - LOW
+    - LOW
+  MODE_RX:
+    - HIGH
+    - LOW
+  MODE_TX:
+    - HIGH
+    - HIGH
+  MODE_TX_HP:
+    - LOW
+    - HIGH
+  MODE_TX_HF:
+    - LOW
+    - LOW
+  MODE_GNSS:
+    - LOW
+    - LOW
+  MODE_WIFI:
+    - LOW
+    - LOW
+
+General:
+  MACAddressSource: eth0
@@ -0,0 +1,30 @@
+---
+Lora:
+## Ebyte E80-900M22S
+## This is a bit experimental
+## 
+##
+  Module: lr1121
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO3_TCXO_VOLTAGE: 1.8
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+
+
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+rfswitch_table:
+  pins: [DIO5, DIO6, DIO7]
+  MODE_STBY: [LOW, LOW, LOW]
+  MODE_RX: [LOW, LOW, LOW]
+  MODE_TX: [LOW, HIGH, LOW]
+  MODE_TX_HP: [HIGH, LOW, LOW]
+  # MODE_TX_HF: []
+  # MODE_GNSS: []
+  MODE_WIFI: [LOW, LOW, LOW]
+
+General:
+  MACAddressSource: eth0
@@ -1,3 +1,9 @@
+Meta:
+  name: Adafruit RFM9x
+  support: deprecated
+  compatible:
+    - raspberry-pi
+
 Lora:
  Module: RF95  # Adafruit RFM9x
  Reset: 25
@@ -1,5 +1,11 @@
 # MeshAdv-Pi E22-900M30S
 # https://github.com/chrismyers2000/MeshAdv-Pi-Hat
+Meta:
+  name: MeshAdv-Pi E22-900M30S
+  support: community
+  compatible:
+    - raspberry-pi
+
 Lora:
  Module: sx1262
  CS: 21
@@ -1,5 +1,11 @@
 # MeshAdv Mini E22-900M22S
 # https://github.com/chrismyers2000/MeshAdv-Mini
+Meta:
+  name: MeshAdv Mini E22-900M22S
+  support: community
+  compatible:
+    - raspberry-pi
+
 Lora:
  Module: sx1262  # Ebyte E22-900M22S 
  CS: 8
@@ -1,11 +1,20 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 1
+  support: official
+  compatible:
+    - raspberry-pi
+
 Lora:

-  ### RAK13300in Slot 1
+  ### RAK13300 in Slot 1
  Module: sx1262
  IRQ: 22 #IO6
  Reset: 16 # IO4
  Busy: 24 # IO5
  # Ant_sw: 13 # IO3 
+  Enable_Pins:
+    - 12
+    - 13
  DIO3_TCXO_VOLTAGE: true
  DIO2_AS_RF_SWITCH: true
  spidev: spidev0.0
@@ -1,8 +1,17 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 2
+  support: official
+  compatible:
+    - raspberry-pi
+
 Lora:
-  ### RAK13300in Slot 2 pins
+  ### RAK13300 in Slot 2 pins
  IRQ: 18 #IO6
  Reset: 24 # IO4
  Busy: 19 # IO5
  # Ant_sw: 23 # IO3 
+  Enable_Pins:
+    - 26
+    - 23
  spidev: spidev0.1
  # CS: 7
@@ -0,0 +1,22 @@
+Meta:
+  name: RAK6421 + RAK13302 Slot 1
+  support: official
+  compatible:
+    - raspberry-pi
+
+Lora:
+
+  ### RAK13302 in Slot 1
+  Module: sx1262
+  IRQ: 22 #IO6
+  Reset: 16 # IO4
+  Busy: 24 # IO5
+  # Ant_sw: 13 # IO3 
+  Enable_Pins:
+    - 12
+    - 13
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
+  spidev: spidev0.0
+  # CS: 8
+  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -0,0 +1,18 @@
+Meta:
+  name: RAK6421 + RAK13302 Slot 2
+  support: official
+  compatible:
+    - raspberry-pi
+
+Lora:
+  ### RAK13302 in Slot 2 pins
+  IRQ: 18 #IO6
+  Reset: 24 # IO4
+  Busy: 19 # IO5
+  # Ant_sw: 23 # IO3 
+  Enable_Pins:
+    - 26
+    - 23
+  spidev: spidev0.1
+  # CS: 7
+  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -1,20 +1,22 @@
---
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-General:
-  MACAddressSource: eth0
+---
+Meta:
+  name: Femtofox Ebyte E80-900M22S with TCXO
+  support: community
+  compatible:
+    - luckfox-pico-mini # Armbian
+
+Lora:
+## Ebyte E80-900M22S
+## This is a bit experimental
+## 
+##
+  Module: lr1121
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO3_TCXO_VOLTAGE: 1.8
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
@@ -1,21 +1,24 @@
---
-Lora:
-## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
-## HT-RA62 (Has internal switching, but whatever)
-## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
-## Will work with any module with or without RF switching, and with TCXO
-  Module: sx1262
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-General:
-  MACAddressSource: eth0
+---
+Meta:
+  name: Femtofox SX1262 TCXO
+  support: community
+  compatible:
+    - luckfox-pico-mini # Armbian
+
+Lora:
+## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
+## HT-RA62 (Has internal switching, but whatever)
+## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
+## Will work with any module with or without RF switching, and with TCXO
+  Module: sx1262
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+#  TXen: bridge to DIO2 on E22 module
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
@@ -1,21 +1,24 @@
---
-Lora:
-## Ebyte E22-900MM22S with no external RF switching setup
-## Waveshare SX126X XXXM, AI Thinker RA-01SH
-## Will work with any module with or without RF switching and no TCXO
-
-  Module: sx1262  
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: false
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1 
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-
-General:
-  MACAddressSource: eth0
+---
+Meta:
+  name: Femtofox SX1262 XTAL
+  support: community
+  compatible:
+    - luckfox-pico-mini # Armbian
+
+Lora:
+## Ebyte E22-900MM22S with no external RF switching setup
+## Waveshare SX126X XXXM, AI Thinker RA-01SH
+## Will work with any module with or without RF switching and no TCXO
+
+  Module: sx1262  
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: false
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1 
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+#  TXen: bridge to DIO2 on E22 module
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
@@ -1,13 +1,21 @@
+Meta:
+  name: RAK6421 + RAK13300 Slot 1 (Autoconf default)
+  support: official
+  compatible:
+    - raspberry-pi
+
 Lora:

-  ### RAK13300in Slot 1
+  ### RAK13300 in Slot 1
  Module: sx1262
  IRQ: 22 #IO6
  Reset: 16 # IO4
  Busy: 24 # IO5
-  # Ant_sw: 13 # IO3 
+  Enable_Pins:
+    - 12
+    - 13
  DIO3_TCXO_VOLTAGE: true
  DIO2_AS_RF_SWITCH: true
  spidev: spidev0.0
-  GPIO_DETECT_PA: 13
-  TX_GAIN_LORA: [8, 8, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7]
+  # GPIO_DETECT_PA: 13
+  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
@@ -1,3 +1,9 @@
+Meta:
+  name: Luckfox Lyra PicoCalc Wio LoRa SX1262
+  support: official
+  compatible:
+    - luckfox-lyra-plus # Armbian
+
 Lora:
  Module: sx1262
  DIO2_AS_RF_SWITCH: true
@@ -2,6 +2,13 @@
 # Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
 # https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
 # 1 Watt Lyra Ultra hat
+Meta:
+  name: wehooper4 Luckfox Ultra 1W
+  support: community
+  compatible:
+    - luckfox-pico-ultra # Armbian
+    - luckfox-lyra-ultra # Armbian
+
 Lora:
  Module: sx1262
  DIO2_AS_RF_SWITCH: true
@@ -2,6 +2,13 @@
 # Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
 # https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
 # 2 Watt Lyra Ultra hat
+Meta:
+  name: wehooper4 Luckfox Ultra 2W
+  support: community
+  compatible:
+    - luckfox-pico-ultra # Armbian
+    - luckfox-lyra-ultra # Armbian
+
 Lora:
  Module: sx1262
  DIO2_AS_RF_SWITCH: true
@@ -2,6 +2,12 @@
 # Enable overlay 'luckfox-lyra-plus-spi0-cs0_rmio13-spidev' with armbian-config
 # Waveshare LoRa HAT for Raspberry Pi Pico
 # https://www.waveshare.com/wiki/Pico-LoRa-SX1262
+Meta:
+  name: Waveshare LoRa HAT for Raspberry Pi Pico
+  support: community
+  compatible:
+    - luckfox-lyra-plus # Armbian
+
 Lora:
  Module: sx1262
  DIO2_AS_RF_SWITCH: true
@@ -1,3 +1,9 @@
+Meta:
+  name: Lora Meshstick SX1262
+  support: official
+  compatible:
+    - usb
+
 Lora:
  Module: sx1262
  CS: 0
@@ -1,3 +1,9 @@
+Meta:
+  name: Lora Meshstick SX1262
+  support: community
+  compatible:
+    - usb
+
 Lora:
  Module: lr1121
  CS: 0
@@ -1,5 +1,11 @@
+Meta:
+  name: Pinedio USB SX1262
+  support: deprecated
+  compatible:
+    - usb
+
 Lora:
  Module: sx1262
  CS: 0 
  IRQ: 10
-  spidev: ch341
+  spidev: ch341
@@ -1,3 +1,9 @@
+Meta:
+  name: raxda-rock2f-starter-edition-hat
+  support: community
+  compatible:
+    - rock-2f # Armbian
+
 Lora:

 ### Raxda Rock 2F running Armbian Linux 6.1.99-vendor-rk35xx
@@ -1,5 +1,11 @@
 # https://www.waveshare.com/core1262-868m.htm
 # https://github.com/markbirss/lora-starter-edition-sx1262-i2c
+Meta:
+  name: lora-starter-edition-sx1262-i2c
+  support: community
+  compatible:
+    - raspberry-pi
+
 Lora:
  Module: sx1262  # Starter Edition SX1262 I2C Raspberry Pi HAT
  DIO2_AS_RF_SWITCH: true
@@ -1,3 +1,9 @@
+Meta:
+  name: meshstick-1262
+  support: official
+  compatible:
+    - usb
+
 Lora:
  Module: sx1262
  CS: 0
@@ -1,3 +1,9 @@
+Meta:
+  name: meshtoad-e22
+  support: official
+  compatible:
+    - usb
+
 Lora:
  Module: sx1262
  CS: 0
@@ -1,3 +1,9 @@
+Meta:
+  name: umesh-1262-30dbm
+  support: community
+  compatible:
+    - clockwork-uconsole
+
 Lora:
  Module: sx1262
  CS: 0
@@ -1,3 +1,9 @@
+Meta:
+  name: umesh-1268-30dbm
+  support: community
+  compatible:
+    - clockwork-uconsole
+
 Lora:
  Module: sx1268
  CS: 0
@@ -1,3 +1,9 @@
+Meta:
+  name: Waveshare SX1262
+  support: deprecated
+  compatible:
+    - raspberry-pi
+
 Lora:
  Module: sx1262  # Waveshare SX126X XXXM
  DIO2_AS_RF_SWITCH: true
@@ -1,5 +1,12 @@
 # https://www.waveshare.com/pico-lora-sx1262-868m.htm
 # https://github.com/markbirss/lora-ws-raspberry-pi-pico-to-rpi-adapter
+
+Meta:
+  name: ws-raspberry-pico-to-rpi-adapter
+  support: community
+  compatible:
+    - raspberry-pi
+
 Lora:
  Module: sx1262  # Waveshare Raspberry Pi Pico to Raspberry Pi HAT Adapter
  DIO2_AS_RF_SWITCH: true
@@ -15,6 +15,12 @@
 #   5     CS          24
 #   26    DIO1/IRQ    26

+Meta:
+  name: ws-raspberry-pico-to-orangepi-03
+  support: community
+  compatible:
+    - orange-pi-zero-3 # Armbian
+
 Lora:
  Module: sx1262  # Waveshare Raspberry Pico Lora module
  DIO2_AS_RF_SWITCH: true
@@ -43,7 +43,7 @@ for pio_env in pio_envs:
  env = {
    "ci": {"board": pio_env, "platform": env_platform},
    "board_level": cfg.get(f"env:{pio_env}", "board_level", default=None),
-    "board_check": bool(cfg.get(f"env:{pio_env}", "board_check", default=False)),
+    "board_check": cfg.get(f"env:{pio_env}", "board_check", default="false").strip().lower() == "true",
  }
  all_envs.append(env)

@@ -87,6 +87,9 @@
  </screenshots>

  <releases>
+    <release version="2.7.21" date="2026-03-11">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.21</url>
+    </release>
    <release version="2.7.20" date="2026-02-11">
      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.20</url>
    </release>
@@ -0,0 +1,54 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x2886", "0x1667"]
+    ],
+    "usb_product": "HT-n5262G",
+    "mcu": "nrf52840",
+    "variant": "heltec_mesh_node_t096",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Heltec nrf (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://heltec.org/",
+  "vendor": "Heltec"
+}
@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi",
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "esp32s3"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "LilyGo T5-ePaper-S3",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://lilygo.cc/products/t5-e-paper-s3-pro",
+  "vendor": "LILYGO"
+}
@@ -0,0 +1,29 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": "-DARDUINO_T_Beam",
+    "f_cpu": "240000000L",
+    "f_flash": "40000000L",
+    "flash_mode": "dio",
+    "mcu": "esp32",
+    "variant": "tbeam"
+  },
+  "connectivity": ["wifi", "bluetooth", "can", "ethernet"],
+  "debug": {
+    "openocd_board": "esp-wroom-32.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "TTGO T-Beam (PSRAM Disabled)",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 1310720,
+    "maximum_size": 4194304,
+    "require_upload_port": true,
+    "speed": 460800
+  },
+  "url": "https://github.com/LilyGO/TTGO-T-Beam",
+  "vendor": "TTGO"
+}
@@ -12,6 +12,6 @@ Ex:
 - `logo_320x480.png`
 - `logo_320x240.png`

-This file is copied to `data/boot/logo.png` before filesytem image compilation.
+This file is copied to `data/boot/logo.png` before filesystem image compilation.

 For additional examples see the [`event/defcon33` branch](https://github.com/meshtastic/firmware/tree/event/defcon33).
@@ -1,3 +1,9 @@
+meshtasticd (2.7.21.0) unstable; urgency=medium
+
+  * Version 2.7.21
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Wed, 11 Mar 2026 11:45:36 +0000
+
 meshtasticd (2.7.20.0) unstable; urgency=medium

  * Version 2.7.20
@@ -3,10 +3,17 @@ export DEBEMAIL="jbennett@incomsystems.biz"
 export PLATFORMIO_LIBDEPS_DIR=pio/libdeps
 export PLATFORMIO_PACKAGES_DIR=pio/packages
 export PLATFORMIO_CORE_DIR=pio/core
+export PLATFORMIO_SETTING_ENABLE_TELEMETRY=0
+export PLATFORMIO_SETTING_CHECK_PLATFORMIO_INTERVAL=3650
+export PLATFORMIO_SETTING_CHECK_PRUNE_SYSTEM_THRESHOLD=10240

 # Download libraries to `pio`
 platformio pkg install -e native-tft
 platformio pkg install -e native-tft -t platformio/tool-scons@4.40502.0
+# Mangle PlatformIO cache to prevent internet access at build-time
+# Simply adds 1 to all expiry (epoch) timestamps, adding ~500 years to expiry date
+cp pio/core/.cache/downloads/usage.db pio/core/.cache/downloads/usage.db.bak
+jq -c 'with_entries(.value |= (. | tostring + "1" | tonumber))' pio/core/.cache/downloads/usage.db.bak >pio/core/.cache/downloads/usage.db
 # Compress `pio` directory to prevent dh_clean from sanitizing it
 tar -cf pio.tar pio/
 rm -rf pio
@@ -20,5 +27,10 @@ rm -rf debian/changelog
 dch --create --distribution "$SERIES" --package "$package" --newversion "$PKG_VERSION~$SERIES" \
 	"GitHub Actions Automatic packaging for $PKG_VERSION~$SERIES"

-# Build the source deb
-debuild -S -nc -k"$GPG_KEY_ID"
+if [[ -n $GPG_KEY_ID ]]; then
+	# Build and sign the source deb
+	debuild -S -nc -k"$GPG_KEY_ID"
+else
+	# Build the source deb without signing (forks)
+	debuild -S -nc
+fi
@@ -9,7 +9,10 @@
 PIO_ENV:=\
 	PLATFORMIO_CORE_DIR=pio/core \
 	PLATFORMIO_LIBDEPS_DIR=pio/libdeps \
-	PLATFORMIO_PACKAGES_DIR=pio/packages
+	PLATFORMIO_PACKAGES_DIR=pio/packages \
+	PLATFORMIO_SETTING_ENABLE_TELEMETRY=0 \
+	PLATFORMIO_SETTING_CHECK_PLATFORMIO_INTERVAL=3650 \
+	PLATFORMIO_SETTING_CHECK_PRUNE_SYSTEM_THRESHOLD=10240

 # Raspbian armhf builds should be compatible with armv6-hardfloat
 # https://www.valvers.com/open-software/raspberry-pi/bare-metal-programming-in-c-part-1/#rpi1-compiler-flags
@@ -77,10 +77,10 @@ lib_deps =
 	https://github.com/meshtastic/TinyGPSPlus/archive/71a82db35f3b973440044c476d4bcdc673b104f4.zip
 	# renovate: datasource=git-refs depName=meshtastic-ArduinoThread packageName=https://github.com/meshtastic/ArduinoThread gitBranch=master
 	https://github.com/meshtastic/ArduinoThread/archive/b841b0415721f1341ea41cccfb4adccfaf951567.zip
-	# renovate: datasource=custom.pio depName=Nanopb packageName=nanopb/library/Nanopb
-	nanopb/Nanopb@0.4.91
-	# renovate: datasource=custom.pio depName=ErriezCRC32 packageName=erriez/library/ErriezCRC32
-	erriez/ErriezCRC32@1.0.1
+	# renovate: datasource=github-tags depName=Nanopb packageName=nanopb/nanopb
+	https://github.com/nanopb/nanopb/archive/refs/tags/nanopb-0.4.9.1.zip
+	# renovate: datasource=github-tags depName=ErriezCRC32 packageName=Erriez/ErriezCRC32
+	https://github.com/Erriez/ErriezCRC32/archive/refs/tags/1.0.1.zip

 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck
@@ -95,34 +95,38 @@ check_flags =
 framework = arduino
 lib_deps =
 	${env.lib_deps}
-	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=end2endzone/library/NonBlockingRTTTL
-	end2endzone/NonBlockingRTTTL@1.4.0
+	# renovate: datasource=github-tags depName=NonBlockingRTTTL packageName=end2endzone/NonBlockingRTTTL
+	https://github.com/end2endzone/NonBlockingRTTTL/archive/refs/tags/1.4.0.zip
+build_unflags =
+	-std=c++11
+	-std=gnu++11
 build_flags = ${env.build_flags} -Os
+	-std=gnu++17
 build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/niche/>

 ; Common libs for communicating over TCP/IP networks such as MQTT
 [networking_base]
 lib_deps =
-	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
-	thingsboard/TBPubSubClient@2.12.1
-	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
-	arduino-libraries/NTPClient@3.2.1
+	# renovate: datasource=github-tags depName=TBPubSubClient packageName=thingsboard/pubsubclient
+	https://github.com/thingsboard/pubsubclient/archive/refs/tags/v2.12.1.zip
+	# renovate: datasource=github-tags depName=NTPClient packageName=arduino-libraries/NTPClient
+	https://github.com/arduino-libraries/NTPClient/archive/refs/tags/3.2.1.zip

 ; Extra TCP/IP networking libs for supported devices
 [networking_extra]
 lib_deps =
-	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
-	arcao/Syslog@2.0.0
+	# renovate: datasource=github-tags depName=Syslog packageName=arcao/Syslog
+	https://github.com/arcao/Syslog/archive/refs/tags/v2.0.zip

 [radiolib_base]
 lib_deps =
-	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	jgromes/RadioLib@7.6.0
+	# renovate: datasource=github-tags depName=RadioLib packageName=jgromes/RadioLib
+	https://github.com/jgromes/RadioLib/archive/refs/tags/7.6.0.zip

 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/6c75195e9987b7a49563232234f2f868dd343cae.zip
+	https://github.com/meshtastic/device-ui/archive/7b1485b86c8d55a40e5226749097767e8b87f396.zip

 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -229,5 +233,5 @@ lib_deps =
 [environmental_extra_no_bsec]
 lib_deps =
 	${environmental_extra_common.lib_deps}
-	# renovate: datasource=custom.pio depName=adafruit/Adafruit BME680 Library packageName=adafruit/library/Adafruit BME680
-	adafruit/Adafruit BME680 Library@^2.0.5
+	# renovate: datasource=custom.pio depName=Adafruit_BME680 packageName=adafruit/library/Adafruit BME680 Library
+	adafruit/Adafruit BME680 Library@2.0.6
@@ -4,6 +4,8 @@
    ":dependencyDashboard",
    ":semanticCommitTypeAll(chore)",
    ":ignoreModulesAndTests",
+    ":noUnscheduledUpdates",
+    "schedule:daily",
    "group:recommended",
    "replacements:all",
    "workarounds:all"
@@ -98,7 +98,6 @@ Syslog &Syslog::logMask(uint8_t priMask)

 void Syslog::enable()
 {
-    this->_client->begin(this->_port);
    this->_enabled = true;
 }

@@ -166,14 +165,21 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
    if ((pri & LOG_FACMASK) == 0)
        pri = LOG_MAKEPRI(LOG_FAC(this->_priDefault), pri);

+    // W5100S: acquire UDP socket on-demand to avoid permanent socket consumption
+    if (!this->_client->begin(this->_port)) {
+        return false;
+    }
+
    if (this->_server != NULL) {
        result = this->_client->beginPacket(this->_server, this->_port);
    } else {
        result = this->_client->beginPacket(this->_ip, this->_port);
    }

-    if (result != 1)
+    if (result != 1) {
+        this->_client->stop();
        return false;
+    }

    this->_client->print('<');
    this->_client->print(pri);
@@ -193,6 +199,8 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
    this->_client->print(message);
    this->_client->endPacket();

+    this->_client->stop(); // W5100S: release UDP socket for other services
+
    return true;
 }

@@ -4,7 +4,8 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
                                                         bool usePreset)
 {

-    // If use_preset is false, always return "Custom"
+    // If use_preset is false, always return "Custom" — callers such as RadioInterface and Channels
+    // rely on this being a stable literal for channel-name hashing and default-channel detection.
    if (!usePreset) {
        return "Custom";
    }
@@ -35,6 +35,11 @@
 #include "nrfx_power.h"
 #endif

+#if defined(ARCH_NRF52)
+#include "Nrf52SaadcLock.h"
+#include "concurrency/LockGuard.h"
+#endif
+
 #if defined(DEBUG_HEAP_MQTT) && !MESHTASTIC_EXCLUDE_MQTT
 #include "mqtt/MQTT.h"
 #include "target_specific.h"
@@ -328,6 +333,9 @@ class AnalogBatteryLevel : public HasBatteryLevel
            scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
            scaled *= operativeAdcMultiplier;
 #else // block for all other platforms
+#ifdef ARCH_NRF52
+            concurrency::LockGuard saadcGuard(concurrency::nrf52SaadcLock);
+#endif
            for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
                raw += analogRead(BATTERY_PIN);
            }
@@ -38,7 +38,10 @@ static bool isPowered()
    return true;
 #endif

-    bool isRouter = (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ? 1 : 0);
+    bool isRouter = ((config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ||
+                      config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER_LATE)
+                         ? 1
+                         : 0);

    // If we are not a router and we already have AC power go to POWER state after init, otherwise go to ON
    // We assume routers might be powered all the time, but from a low current (solar) source
@@ -182,11 +185,7 @@ static void darkEnter()
 static void serialEnter()
 {
    LOG_POWERFSM("State: serialEnter");
-#ifndef ARCH_NRF52
-    // nRF52 runs BLE on SoftDevice independently of USB serial — no need to disable it.
-    // (Same rationale as nbEnter() which already guards this with #ifdef ARCH_ESP32)
    setBluetoothEnable(false);
-#endif
    if (screen) {
        screen->setOn(true);
    }
@@ -266,7 +265,10 @@ Fsm powerFSM(&stateBOOT);

 void PowerFSM_setup()
 {
-    bool isRouter = (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ? 1 : 0);
+    bool isRouter = ((config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ||
+                      config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER_LATE)
+                         ? 1
+                         : 0);
    bool hasPower = isPowered();

    LOG_INFO("PowerFSM init, USB power=%d", hasPower ? 1 : 0);
@@ -345,7 +345,7 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
    return;
 }

-void RedirectablePrint::hexDump(const char *logLevel, unsigned char *buf, uint16_t len)
+void RedirectablePrint::hexDump(const char *logLevel, const unsigned char *buf, uint16_t len)
 {
    const char alphabet[17] = "0123456789abcdef";
    log(logLevel, "    +------------------------------------------------+ +----------------+");
@@ -44,7 +44,7 @@ class RedirectablePrint : public Print
    /** like printf but va_list based */
    size_t vprintf(const char *logLevel, const char *format, va_list arg);

-    void hexDump(const char *logLevel, unsigned char *buf, uint16_t len);
+    void hexDump(const char *logLevel, const unsigned char *buf, uint16_t len);

    std::string mt_sprintf(const std::string fmt_str, ...);

@@ -6,6 +6,11 @@
 #include "Tone.h"
 #endif

+#if defined(HAS_I2S)
+#include "main.h"
+#include <unordered_map>
+#endif
+
 #if !defined(ARCH_PORTDUINO)
 extern "C" void delay(uint32_t dwMs);
 #endif
@@ -50,6 +55,50 @@ const int DURATION_1_2 = 500;  // 1/2 note
 const int DURATION_3_4 = 750;  // 3/4 note
 const int DURATION_1_1 = 1000; // 1/1 note

+#ifdef HAS_I2S
+void playTonesRTTTL(const ToneDuration *tone_durations, int size)
+{
+    // translate ToneDuration[] to RTTTL string and play using audioThread
+    static std::unordered_map<int, std::string> freqToNote = {
+        {NOTE_C3, "c4"},   {NOTE_CS3, "c#4"}, {NOTE_D3, "d4"},   {NOTE_DS3, "d#4"}, {NOTE_E3, "e4"},   {NOTE_F3, "f4"},
+        {NOTE_FS3, "f#4"}, {NOTE_G3, "g4"},   {NOTE_GS3, "g#4"}, {NOTE_A3, "a4"},   {NOTE_AS3, "a#4"}, {NOTE_B3, "b4"},
+        {NOTE_C4, "c5"},   {NOTE_E4, "e5"},   {NOTE_G4, "g5"},   {NOTE_A4, "a5"},   {NOTE_C5, "c6"},   {NOTE_E5, "e6"},
+        {NOTE_G5, "g6"},   {NOTE_F5, "f6"},   {NOTE_G6, "g7"},   {NOTE_E7, "e8"}};
+
+    char rtttl[128] = "tone:d=32,o=4,b=200:"; // default duration and octave
+    for (int i = 0; i < size; i++) {
+        const auto &td = tone_durations[i];
+        std::string note = "b4";
+        if (freqToNote.find(td.frequency_khz) != freqToNote.end()) {
+            note = freqToNote[td.frequency_khz];
+        }
+        int dur = 32; // default duration
+        if (td.duration_ms >= 1000)
+            dur = 1;
+        else if (td.duration_ms >= 500)
+            dur = 2;
+        else if (td.duration_ms >= 250)
+            dur = 4;
+        else if (td.duration_ms >= 125)
+            dur = 8;
+        else if (td.duration_ms >= 62)
+            dur = 16;
+        else
+            dur = 32;
+
+        char noteStr[64];
+        snprintf(noteStr, sizeof(noteStr), "%s,%d", note.c_str(), dur);
+        strncat(rtttl, noteStr, sizeof(rtttl) - strlen(rtttl) - 1);
+
+        audioThread->beginRttl(rtttl, strlen(rtttl));
+        while (audioThread->isPlaying()) {
+            delay(10);
+        }
+        return;
+    }
+}
+#endif
+
 void playTones(const ToneDuration *tone_durations, int size)
 {
    if (config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_DISABLED ||
@@ -57,7 +106,13 @@ void playTones(const ToneDuration *tone_durations, int size)
        // Buzzer is disabled or not set to system tones
        return;
    }
-#ifdef PIN_BUZZER
+#ifdef HAS_I2S
+    if (moduleConfig.external_notification.use_i2s_as_buzzer && audioThread) {
+        playTonesRTTTL(tone_durations, size);
+        return;
+    }
+#endif
+#if defined(PIN_BUZZER)
    if (!config.device.buzzer_gpio)
        config.device.buzzer_gpio = PIN_BUZZER;
 #endif
@@ -78,6 +78,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Configuration
 // -----------------------------------------------------------------------------

+// Pre-hop drop handling (compile-time flag).
+#ifndef MESHTASTIC_PREHOP_DROP
+#define MESHTASTIC_PREHOP_DROP 0
+#endif
+
 /// Convert a preprocessor name into a quoted string
 #define xstr(s) ystr(s)
 #define ystr(s) #s
@@ -149,6 +154,23 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define TX_GAIN_LORA 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 9, 8, 7
 #endif

+#ifdef USE_KCT8103L_PA
+// Power Amps are often non-linear, so we can use an array of values for the power curve
+#if defined(HELTEC_WIRELESS_TRACKER_V2)
+#define NUM_PA_POINTS 22
+#define TX_GAIN_LORA 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 13, 13, 13, 12, 12, 11, 10, 9, 8, 7
+#elif defined(HELTEC_MESH_NODE_T096)
+#define NUM_PA_POINTS 22
+#define TX_GAIN_LORA 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 13, 13, 13, 12, 11, 10, 9, 8, 7
+#else
+// If a board enables USE_KCT8103L_PA but does not match a known variant and has
+// not already provided a PA curve, fail at compile time to avoid unsafe defaults.
+#if !defined(NUM_PA_POINTS) || !defined(TX_GAIN_LORA)
+#error "USE_KCT8103L_PA is defined, but no PA gain curve (NUM_PA_POINTS / TX_GAIN_LORA) is configured for this board."
+#endif
+#endif
+#endif
+
 #ifdef RAK13302
 #define NUM_PA_POINTS 22
 #define TX_GAIN_LORA 7, 8, 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 8
@@ -163,6 +185,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define TX_GAIN_LORA 0
 #endif

+#ifndef HAS_LORA_FEM
+#define HAS_LORA_FEM 0
+#endif
+
 // -----------------------------------------------------------------------------
 // Feature toggles
 // -----------------------------------------------------------------------------
@@ -261,6 +287,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BHI260AP_ADDR 0x28
 #define BMM150_ADDR 0x13
 #define DA217_ADDR 0x26
+#define BMI270_ADDR 0x68
+#define BMI270_ADDR_ALT 0x69

 // -----------------------------------------------------------------------------
 // LED
@@ -487,6 +515,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MESHTASTIC_EXCLUDE_REMOTEHARDWARE 1
 #define MESHTASTIC_EXCLUDE_STOREFORWARD 1
 #define MESHTASTIC_EXCLUDE_TEXTMESSAGE 1
+#define MESHTASTIC_EXCLUDE_TRAFFIC_MANAGEMENT 1
 #define MESHTASTIC_EXCLUDE_ATAK 1
 #define MESHTASTIC_EXCLUDE_CANNEDMESSAGES 1
 #define MESHTASTIC_EXCLUDE_NEIGHBORINFO 1
@@ -528,69 +557,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define HAS_SCREEN 0
 #endif

-// -----------------------------------------------------------------------------
-// MESHTASTIC_LOCKDOWN — combined hardened build flag
-//
-// All targets:
-//   DEBUG_MUTE                         — suppress serial/USB log output
-//   MESHTASTIC_EXCLUDE_*               — strip non-essential modules
-//   MESHTASTIC_PHONEAPI_ACCESS_CONTROL — redact keys from unauthenticated BLE/USB/TCP clients
-//   HARDENED_DEFAULTS                  — set is_managed, RANDOM_PIN, TAK role at first boot
-//
-// nRF52 (CC310 hardware crypto):
-//   MESHTASTIC_ENCRYPTED_STORAGE       — AES-128-CTR + HMAC-SHA256 at-rest encryption
-//   MESHTASTIC_ENABLE_APPROTECT        — write UICR APPROTECT to block debug probe
-//
-// ESP32 (stub — mbedTLS crypto TODO):
-//   MESHTASTIC_ENCRYPTED_STORAGE       — same API, plaintext pass-through until ported
-//   APPROTECT equivalent               — burn JTAG_DISABLE + flash encryption via espsecure.py
-// -----------------------------------------------------------------------------
-#ifdef MESHTASTIC_LOCKDOWN
-
-// Suppress all serial/USB-CDC log output — prevents info leakage via physical access
-#define DEBUG_MUTE
-
-// Strip non-essential modules to reduce attack surface
-#define MESHTASTIC_EXCLUDE_DETECTIONSENSOR 1
-#define MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR 1
-#define MESHTASTIC_EXCLUDE_AIR_QUALITY 1
-#define MESHTASTIC_EXCLUDE_HEALTH_TELEMETRY 1
-#define MESHTASTIC_EXCLUDE_POWER_TELEMETRY 1
-#define MESHTASTIC_EXCLUDE_RANGETEST 1
-#define MESHTASTIC_EXCLUDE_REMOTEHARDWARE 1
-#define MESHTASTIC_EXCLUDE_STOREFORWARD 1
-#define MESHTASTIC_EXCLUDE_CANNEDMESSAGES 1
-#define MESHTASTIC_EXCLUDE_SERIAL 1
-#define MESHTASTIC_EXCLUDE_POWERSTRESS 1
-#define MESHTASTIC_EXCLUDE_DROPZONE 1
-#define MESHTASTIC_EXCLUDE_REPLYBOT 1
-#define MESHTASTIC_EXCLUDE_PAXCOUNTER 1
-#define MESHTASTIC_EXCLUDE_AUDIO 1
-#define MESHTASTIC_EXCLUDE_STATUS 1
-#define MESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE 1
-#define MESHTASTIC_EXCLUDE_POWERMON 1
-#define MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION 1
-
-// Access control and hardened defaults are pure C++ — no platform-specific deps.
-#define MESHTASTIC_PHONEAPI_ACCESS_CONTROL 1
-#define HARDENED_DEFAULTS 1
-
-// Platform-specific security features:
-#if defined(ARCH_NRF52)
-// Full encrypted storage via CC310 hardware AES-128-CTR + HMAC-SHA256.
-#define MESHTASTIC_ENCRYPTED_STORAGE 1
-// Hardware JTAG/SWD lockout: firmware writes NRF_UICR->APPROTECT = 0x00 once.
-#define MESHTASTIC_ENABLE_APPROTECT 1
-#elif defined(ARCH_ESP32)
-// Encrypted storage stub: plaintext pass-through, same API, crypto TODO (mbedTLS).
-// APPROTECT equivalent: burn JTAG_DISABLE eFuse and enable flash encryption
-// via espsecure.py at provisioning time — not firmware-controlled.
-#define MESHTASTIC_ENCRYPTED_STORAGE 1
-#else
-#warning "MESHTASTIC_LOCKDOWN: encrypted storage not available on this platform; access control and hardened defaults still active"
-#endif
-
-#endif // MESHTASTIC_LOCKDOWN
-
 #include "DebugConfiguration.h"
 #include "RF95Configuration.h"
@@ -37,8 +37,8 @@ ScanI2C::FoundDevice ScanI2C::firstKeyboard() const

 ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const
 {
-    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3, BMX160, STK8BAXX, ICM20948, QMA6100P, BMM150};
-    return firstOfOrNONE(9, types);
+    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3, BMX160, STK8BAXX, ICM20948, QMA6100P, BMM150, BMI270};
+    return firstOfOrNONE(10, types);
 }

 ScanI2C::FoundDevice ScanI2C::firstAQI() const
@@ -89,10 +89,12 @@ class ScanI2C
        DA217,
        CHSC6X,
        CST226SE,
+        BMI270,
        SEN5X,
        SFA30,
        CW2015,
-        SCD30
+        SCD30,
+        ADS1115
    } DeviceType;

    // typedef uint8_t DeviceAddress;
@@ -341,7 +341,9 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                        type = DPS310;
                        break;
                    }
-                    break;
+                    if (type == DPS310) {
+                        break;
+                    }
                default:
                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1); // GET_ID
                    switch (registerValue) {
@@ -652,9 +654,8 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                }
                break;

-            case ICM20948_ADDR:     // same as BMX160_ADDR and SEN5X_ADDR
-            case ICM20948_ADDR_ALT: // same as MPU6050_ADDR
-                // ICM20948 Register check
+            case ICM20948_ADDR:     // same as BMX160_ADDR, BMI270_ADDR_ALT, and SEN5X_ADDR
+            case ICM20948_ADDR_ALT: // same as MPU6050_ADDR, BMI270_ADDR
                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
 #ifdef HAS_ICM20948
                type = ICM20948;
@@ -665,6 +666,14 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                    type = ICM20948;
                    logFoundDevice("ICM20948", (uint8_t)addr.address);
                    break;
+                } else if (registerValue == 0x24) {
+                    type = BMI270;
+                    logFoundDevice("BMI270", (uint8_t)addr.address);
+                    break;
+                } else if (registerValue == 0xD8) { // BMX160 chip ID at register 0x00
+                    type = BMX160;
+                    logFoundDevice("BMX160", (uint8_t)addr.address);
+                    break;
                } else {
                    String prod = "";
                    prod = readSEN5xProductName(i2cBus, addr.address);
@@ -718,11 +727,18 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                if (len == 5 && memcmp(expectedInfo, info, len) == 0) {
                    LOG_INFO("NXP SE050 crypto chip found");
                    type = NXP_SE050;
-
-                } else {
-                    LOG_INFO("FT6336U touchscreen found");
-                    type = FT6336U;
+                    break;
                }
+
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x01), 2);
+                if (registerValue == 0x8583 || registerValue == 0x8580) {
+                    type = ADS1115;
+                    logFoundDevice("ADS1115 ADC", (uint8_t)addr.address);
+                    break;
+                }
+
+                LOG_INFO("FT6336U touchscreen found");
+                type = FT6336U;
                break;
            }

@@ -93,7 +93,7 @@ static const char *getGPSPowerStateString(GPSPowerState state)

 #ifdef PIN_GPS_SWITCH
 // If we have a hardware switch, define a periodic watcher outside of the GPS runOnce thread, since this can be sleeping
-// idefinitely
+// indefinitely

 int lastState = LOW;
 bool firstrun = true;
@@ -103,6 +103,14 @@ static int32_t gpsSwitch()
    if (gps) {
        int currentState = digitalRead(PIN_GPS_SWITCH);

+        // Respect explicit NOT_PRESENT mode and do not let the hardware switch re-enable GPS.
+        if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_NOT_PRESENT) {
+            gps->disable();
+            lastState = currentState;
+            firstrun = false;
+            return 1000;
+        }
+
        // if the switch is set to zero, disable the GPS Thread
        if (firstrun)
            if (currentState == LOW)
@@ -586,14 +594,14 @@ bool GPS::setup()
            _serial_gps->write("$PMTK301,2*2E\r\n");
            delay(250);
        } else if (gnssModel == GNSS_MODEL_ATGM336H) {
-            // Set the intial configuration of the device - these _should_ work for most AT6558 devices
+            // Set the initial configuration of the device - these _should_ work for most AT6558 devices
            msglen = makeCASPacket(0x06, 0x07, sizeof(_message_CAS_CFG_NAVX_CONF), _message_CAS_CFG_NAVX_CONF);
            _serial_gps->write(UBXscratch, msglen);
            if (getACKCas(0x06, 0x07, 250) != GNSS_RESPONSE_OK) {
                LOG_WARN("ATGM336H: Could not set Config");
            }

-            // Set the update frequence to 1Hz
+            // Set the update frequency to 1Hz
            msglen = makeCASPacket(0x06, 0x04, sizeof(_message_CAS_CFG_RATE_1HZ), _message_CAS_CFG_RATE_1HZ);
            _serial_gps->write(UBXscratch, msglen);
            if (getACKCas(0x06, 0x04, 250) != GNSS_RESPONSE_OK) {
@@ -700,7 +708,7 @@ bool GPS::setup()
                } else { // 8,9
                    LOG_INFO("GPS+SBAS+GLONASS+Galileo configured");
                }
-                // Documentation say, we need wait atleast 0.5s after reconfiguration of GNSS module, before sending next
+                // Documentation say, we need wait at least 0.5s after reconfiguration of GNSS module, before sending next
                // commands for the M8 it tends to be more... 1 sec should be enough ;>)
                delay(1000);
            }
@@ -733,7 +741,7 @@ bool GPS::setup()
                SEND_UBX_PACKET(0x06, 0x86, _message_PMS, "enable powersave for GPS", 500);
                SEND_UBX_PACKET(0x06, 0x3B, _message_CFG_PM2, "enable powersave details for GPS", 500);

-                // For M8 we want to enable NMEA vserion 4.10 so we can see the additional sats.
+                // For M8 we want to enable NMEA version 4.10 so we can see the additional sats.
                if (gnssModel == GNSS_MODEL_UBLOX8) {
                    clearBuffer();
                    SEND_UBX_PACKET(0x06, 0x17, _message_NMEA, "enable NMEA 4.10", 500);
@@ -1211,7 +1219,7 @@ int32_t GPS::runOnce()
        return disable(); // This should trigger when we have a fixed position, and get that first position

    // 9600bps is approx 1 byte per msec, so considering our buffer size we never need to wake more often than 200ms
-    // if not awake we can run super infrquently (once every 5 secs?) to see if we need to wake.
+    // if not awake we can run super infrequently (once every 5 secs?) to see if we need to wake.
    return (powerState == GPS_ACTIVE) ? GPS_THREAD_INTERVAL : 5000;
 }

@@ -12,7 +12,7 @@ GeoCoord::GeoCoord(int32_t lat, int32_t lon, int32_t alt) : _latitude(lat), _lon

 GeoCoord::GeoCoord(float lat, float lon, int32_t alt) : _altitude(alt)
 {
-    // Change decimial representation to int32_t. I.e., 12.345 becomes 123450000
+    // Change decimal representation to int32_t. I.e., 12.345 becomes 123450000
    _latitude = int32_t(lat * 1e+7);
    _longitude = int32_t(lon * 1e+7);
    GeoCoord::setCoords();
@@ -20,7 +20,7 @@ GeoCoord::GeoCoord(float lat, float lon, int32_t alt) : _altitude(alt)

 GeoCoord::GeoCoord(double lat, double lon, int32_t alt) : _altitude(alt)
 {
-    // Change decimial representation to int32_t. I.e., 12.345 becomes 123450000
+    // Change decimal representation to int32_t. I.e., 12.345 becomes 123450000
    _latitude = int32_t(lat * 1e+7);
    _longitude = int32_t(lon * 1e+7);
    GeoCoord::setCoords();
@@ -467,10 +467,10 @@ int32_t GeoCoord::bearingTo(const GeoCoord &pointB)
 }

 /**
- * Create a new point bassed on the passed in poin
+ * Create a new point based on the passed-in point
 * Ported from http://www.edwilliams.org/avform147.htm#LL
 * @param bearing
- * The bearing in raidans
+ * The bearing in radians
 * @param range_meters
 * range in meters
 * @return GeoCoord object of point at bearing and range from initial point
@@ -593,4 +593,4 @@ double GeoCoord::toRadians(double deg)
 double GeoCoord::toDegrees(double r)
 {
    return r * 180 / PI;
-}
+}
@@ -2,6 +2,7 @@
 #include "configuration.h"
 #include "detect/ScanI2C.h"
 #include "main.h"
+#include "modules/NodeInfoModule.h"
 #include <Throttle.h>
 #include <sys/time.h>
 #include <time.h>
@@ -12,6 +13,14 @@ uint32_t lastSetFromPhoneNtpOrGps = 0;
 static uint32_t lastTimeValidationWarning = 0;
 static const uint32_t TIME_VALIDATION_WARNING_INTERVAL_MS = 15000; // 15 seconds

+static void triggerNodeInfoCheckOnTimeSource(RTCQuality oldQuality, RTCQuality newQuality)
+{
+    if (oldQuality == RTCQualityNone && newQuality > RTCQualityNone && nodeInfoModule) {
+        LOG_DEBUG("Time source acquired (%s -> %s), triggering NodeInfo recheck", RtcName(oldQuality), RtcName(newQuality));
+        nodeInfoModule->triggerImmediateNodeInfoCheck();
+    }
+}
+
 RTCQuality getRTCQuality()
 {
    return currentQuality;
@@ -61,9 +70,11 @@ RTCSetResult readFromRTC()
        LOG_DEBUG("Read RTC time from RV3028 getTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                  t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
        if (currentQuality == RTCQualityNone) {
+            RTCQuality oldQuality = currentQuality;
            timeStartMsec = now;
            zeroOffsetSecs = tv.tv_sec;
            currentQuality = RTCQualityDevice;
+            triggerNodeInfoCheckOnTimeSource(oldQuality, currentQuality);
        }
        return RTCSetResultSuccess;
    } else {
@@ -105,9 +116,11 @@ RTCSetResult readFromRTC()
        LOG_DEBUG("Read RTC time from %s getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", rtc.getChipName(), t.tm_year + 1900,
                  t.tm_mon + 1, t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
        if (currentQuality == RTCQualityNone) {
+            RTCQuality oldQuality = currentQuality;
            timeStartMsec = now;
            zeroOffsetSecs = tv.tv_sec;
            currentQuality = RTCQualityDevice;
+            triggerNodeInfoCheckOnTimeSource(oldQuality, currentQuality);
        }
        return RTCSetResultSuccess;
    } else {
@@ -139,9 +152,11 @@ RTCSetResult readFromRTC()
            }
 #endif
            if (currentQuality == RTCQualityNone) {
+                RTCQuality oldQuality = currentQuality;
                timeStartMsec = now;
                zeroOffsetSecs = tv.tv_sec;
                currentQuality = RTCQualityDevice;
+                triggerNodeInfoCheckOnTimeSource(oldQuality, currentQuality);
            }
            return RTCSetResultSuccess;
        }
@@ -214,6 +229,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
    }

    if (shouldSet) {
+        RTCQuality oldQuality = currentQuality;
        currentQuality = q;
        lastSetMsec = now;
        if (currentQuality >= RTCQualityNTP) {
@@ -223,7 +239,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
        // This delta value works on all platforms
        timeStartMsec = now;
        zeroOffsetSecs = tv->tv_sec;
-        // If this platform has a setable RTC, set it
+        // If this platform has a settable RTC, set it
 #ifdef RV3028_RTC
        if (rtc_found.address == RV3028_RTC) {
            Melopero_RV3028 rtc;
@@ -281,6 +297,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
 #endif

        readFromRTC();
+        triggerNodeInfoCheckOnTimeSource(oldQuality, currentQuality);
        return RTCSetResultSuccess;
    } else {
        return RTCSetResultNotSet; // RTC was already set with a higher quality time
@@ -397,12 +414,23 @@ uint32_t getValidTime(RTCQuality minQuality, bool local)
    return (currentQuality >= minQuality) ? getTime(local) : 0;
 }

+#ifdef PIO_UNIT_TESTING
+void setBootRelativeTimeForUnitTest(uint32_t secondsSinceBoot)
+{
+    currentQuality = RTCQualityNone;
+    zeroOffsetSecs = 0;
+    timeStartMsec = millis() - (secondsSinceBoot * 1000);
+    lastSetFromPhoneNtpOrGps = 0;
+    lastTimeValidationWarning = 0;
+}
+#endif
+
 time_t gm_mktime(const struct tm *tm)
 {
 #if !MESHTASTIC_EXCLUDE_TZ
    time_t result = 0;

-    // First, get us to the start of tm->year, by calcuating the number of days since the Unix epoch.
+    // First, get us to the start of tm->year, by calculating the number of days since the Unix epoch.
    int year = 1900 + tm->tm_year; // tm_year is years since 1900
    int year_minus_one = year - 1;
    int days_before_this_year = 0;
@@ -54,6 +54,10 @@ uint32_t getValidTime(RTCQuality minQuality, bool local = false);

 RTCSetResult readFromRTC();

+#ifdef PIO_UNIT_TESTING
+void setBootRelativeTimeForUnitTest(uint32_t secondsSinceBoot);
+#endif
+
 time_t gm_mktime(const struct tm *tm);

 #define SEC_PER_DAY 86400
@@ -37,7 +37,7 @@ static const uint8_t _message_CAS_CFG_RATE_1HZ[] = {

 // CFG-NAVX (0x06, 0x07)
 // Initial ATGM33H-5N configuration, Updates for Dynamic Mode, Fix Mode, and SV system
-// Qwirk: The ATGM33H-5N-31 should only support GPS+BDS, however it will happily enable
+// Quirk: The ATGM33H-5N-31 should only support GPS+BDS, however it will happily enable
 //  and use GPS+BDS+GLONASS iff the correct CFG_NAVX command is used.
 static const uint8_t _message_CAS_CFG_NAVX_CONF[] = {
    0x03, 0x01, 0x00, 0x00, // Update Mask: Dynamic Mode, Fix Mode, Nav Settings
@@ -57,7 +57,7 @@ static const uint8_t _message_CFG_PM2[] PROGMEM = {
    0x00, 0x00, 0x00, 0x00  // 0x64, 0x40, 0x01, 0x00  // reserved 11
 };

-// Constallation setup, none required for Neo-6
+// Constellation setup, none required for Neo-6

 // For Neo-7 GPS & SBAS
 static const uint8_t _message_GNSS_7[] = {
@@ -157,7 +157,7 @@ static const uint8_t _message_NAVX5[] = {
    0x00, 0x00, 0x00, 0x00, // Reserved 9
    0x00,                   // Reserved 10
    0x00,                   // Reserved 11
-    0x00,                   // usePPP (Precice Point Positioning) (0 = false, 1 = true)
+    0x00,                   // usePPP (Precise Point Positioning) (0 = false, 1 = true)
    0x01,                   // useAOP  (AssistNow Autonomous configuration) = 1 (enabled)
    0x00,                   // Reserved 12
    0x00,                   // Reserved 13
@@ -185,7 +185,7 @@ static const uint8_t _message_NAVX5_8[] = {
    0x00,                   // Reserved 4
    0x00, 0x00,             // Reserved 5
    0x00, 0x00,             // Reserved 6
-    0x00,                   // usePPP (Precice Point Positioning) (0 = false, 1 = true)
+    0x00,                   // usePPP (Precise Point Positioning) (0 = false, 1 = true)
    0x01,                   // aopCfg  (AssistNow Autonomous configuration) = 1 (enabled)
    0x00, 0x00,             // Reserved 7
    0x00, 0x00,             // aopOrbMaxErr = 0 to reset to firmware default
@@ -314,7 +314,7 @@ static const uint8_t _message_DISABLE_TXT_INFO[] = {
 // This command applies to M8 products
 static const uint8_t _message_PMS[] = {
    0x00,       // Version (0)
-    0x03,       // Power setup value 3 = Agresssive 1Hz
+    0x03,       // Power setup value 3 = Agressive 1Hz
    0x00, 0x00, // period: not applicable, set to 0
    0x00, 0x00, // onTime: not applicable, set to 0
    0x00, 0x00  // reserved, generated by u-center
@@ -337,7 +337,7 @@ static const uint8_t _message_SAVE_10[] = {
 // As the M10 has no flash, the best we can do to preserve the config is to set it in RAM and BBR.
 // BBR will survive a restart, and power off for a while, but modules with small backup
 // batteries or super caps will not retain the config for a long power off time.
-// for all configurations using sleep / low power modes, V_BCKP needs to be hooked to permanent power for fast aquisition after
+// for all configurations using sleep / low power modes, V_BCKP needs to be hooked to permanent power for fast acquisition after
 // sleep

 // VALSET Commands for M10
@@ -462,7 +462,7 @@ Default GNSS configuration is: GPS, Galileo, BDS B1l, with QZSS and SBAS enabled
 The PMREQ puts the receiver to sleep and wakeup re-acquires really fast and seems to not need
 the PM config. Lets try without it.
 PMREQ sort of works with SBAS, but the awake time is too short to re-acquire any SBAS sats.
-The defination of "Got Fix" doesn't seem to include SBAS. Much more too this...
+The definition of "Got Fix" doesn't seem to include SBAS. Much more too this...
 Even if it was, it can take minutes (up to 12.5),
 even under good sat visibility conditions to re-acquire the SBAS data.

@@ -1,6 +1,6 @@
 #include "configuration.h"

-#ifdef USE_EINK
+#if defined(USE_EINK) && !defined(USE_EINK_PARALLELDISPLAY)
 #include "EInkDisplay2.h"
 #include "SPILock.h"
 #include "main.h"
@@ -101,7 +101,7 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
    return true;
 }

-// End the update process - virtual method, overriden in derived class
+// End the update process - virtual method, overridden in derived class
 void EInkDisplay::endUpdate()
 {
    // Power off display hardware, then deep-sleep (Except Wireless Paper V1.1, no deep-sleep)
@@ -143,6 +143,10 @@ bool EInkDisplay::connect()
 #ifdef ELECROW_ThinkNode_M1
    // ThinkNode M1 has a hardware dimmable backlight. Start enabled
    digitalWrite(PIN_EINK_EN, HIGH);
+#elif defined(MINI_EPAPER_S3)
+    // T-Mini Epaper S3 requires panel power rail enabled before SPI transfer.
+    digitalWrite(PIN_EINK_EN, HIGH);
+    delay(10);
 #else
    digitalWrite(PIN_EINK_EN, LOW);
 #endif
@@ -202,7 +206,8 @@ bool EInkDisplay::connect()
    }

 #elif defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER) ||                 \
-    defined(CROWPANEL_ESP32S3_5_EPAPER) || defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER)
+    defined(CROWPANEL_ESP32S3_5_EPAPER) || defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER) ||         \
+    defined(MINI_EPAPER_S3)
    {
        // Start HSPI
        hspi = new SPIClass(HSPI);
@@ -216,9 +221,13 @@ bool EInkDisplay::connect()

        // Init GxEPD2
        adafruitDisplay->init();
+#if defined(MINI_EPAPER_S3)
+        adafruitDisplay->setRotation(3);
+#else
        adafruitDisplay->setRotation(3);
 #if defined(CROWPANEL_ESP32S3_5_EPAPER) || defined(CROWPANEL_ESP32S3_4_EPAPER)
        adafruitDisplay->setRotation(0);
+#endif
 #endif
    }
 #elif defined(PCA10059) || defined(ME25LS01)
@@ -259,17 +268,6 @@ bool EInkDisplay::connect()
        adafruitDisplay->setRotation(3);
        adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
    }
-#elif defined(MINI_EPAPER_S3)
-    spi1 = new SPIClass(HSPI);
-    spi1->begin(PIN_SPI1_SCK, PIN_SPI1_MISO, PIN_SPI1_MOSI, PIN_EINK_CS);
-
-    // Create GxEPD2 objects
-    auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, *spi1);
-    adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
-
-    // Init GxEPD2
-    adafruitDisplay->init();
-    adafruitDisplay->setRotation(1);
 #elif defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_VISION_MASTER_E213)

    // Detect display model, before starting SPI
@@ -1,6 +1,6 @@
 #pragma once

-#ifdef USE_EINK
+#if defined(USE_EINK) && !defined(USE_EINK_PARALLELDISPLAY)

 #include "GxEPD2_BW.h"
 #include <OLEDDisplay.h>
@@ -89,12 +89,12 @@ class EInkDisplay : public OLEDDisplay
    // If display uses HSPI
 #if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_VISION_MASTER_E213) ||               \
    defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER) || defined(CROWPANEL_ESP32S3_5_EPAPER) ||                   \
-    defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER) || defined(ELECROW_ThinkNode_M5)
+    defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER) || defined(ELECROW_ThinkNode_M5) ||               \
+    defined(MINI_EPAPER_S3)
    SPIClass *hspi = NULL;
 #endif

-#if defined(HELTEC_MESH_POCKET) || defined(SEEED_WIO_TRACKER_L1_EINK) || defined(HELTEC_MESH_SOLAR_EINK) ||                      \
-    defined(MINI_EPAPER_S3)
+#if defined(HELTEC_MESH_POCKET) || defined(SEEED_WIO_TRACKER_L1_EINK) || defined(HELTEC_MESH_SOLAR_EINK)
    SPIClass *spi1 = NULL;
 #endif

@@ -95,7 +95,7 @@ void EInkDynamicDisplay::adjustRefreshCounters()
 // Trigger the display update by calling base class
 bool EInkDynamicDisplay::update()
 {
-    // Detemine the refresh mode to use, and start the update
+    // Determine the refresh mode to use, and start the update
    bool refreshApproved = determineMode();
    if (refreshApproved) {
        EInkDisplay::forceDisplay(0); // Bypass base class' own rate-limiting system
@@ -317,7 +317,7 @@ void EInkDynamicDisplay::checkFrameMatchesPrevious()
    LOG_DEBUG("refresh=SKIPPED, reason=FRAME_MATCHED_PREVIOUS, frameFlags=0x%x", frameFlags);
 }

-// Have too many fast-refreshes occured consecutively, since last full refresh?
+// Have too many fast-refreshes occurred consecutively, since last full refresh?
 void EInkDynamicDisplay::checkConsecutiveFastRefreshes()
 {
    // If a decision was already reached, don't run the check
@@ -561,4 +561,4 @@ void EInkDynamicDisplay::awaitRefresh()
 }
 #endif // HAS_EINK_ASYNCFULL

-#endif // USE_EINK_DYNAMICDISPLAY
+#endif // USE_EINK_DYNAMICDISPLAY
@@ -0,0 +1,427 @@
+#include "EInkParallelDisplay.h"
+
+#ifdef USE_EINK_PARALLELDISPLAY
+
+#include "Wire.h"
+#include "variant.h"
+#include <Arduino.h>
+#include <atomic>
+#include <stdlib.h>
+#include <string.h>
+
+#include "FastEPD.h"
+
+// Thresholds for choosing partial vs full update
+#ifndef EPD_PARTIAL_THRESHOLD_ROWS
+#define EPD_PARTIAL_THRESHOLD_ROWS 128 // if changed region <= this many rows, prefer partial
+#endif
+#ifndef EPD_FULLSLOW_PERIOD
+#define EPD_FULLSLOW_PERIOD 100 // every N full updates do a slow (CLEAR_SLOW) full refresh
+#endif
+#ifndef EPD_RESPONSIVE_MIN_MS
+#define EPD_RESPONSIVE_MIN_MS 1000 // simple rate-limit (ms) for responsive updates
+#endif
+
+EInkParallelDisplay::EInkParallelDisplay(uint16_t width, uint16_t height, EpdRotation rot) : epaper(nullptr), rotation(rot)
+{
+    LOG_INFO("init EInkParallelDisplay");
+    // Set dimensions in OLEDDisplay base class
+    this->geometry = GEOMETRY_RAWMODE;
+    this->displayWidth = width;
+    this->displayHeight = height;
+
+    // Round shortest side up to nearest byte, to prevent truncation causing an undersized buffer
+    uint16_t shortSide = min(width, height);
+    uint16_t longSide = max(width, height);
+    if (shortSide % 8 != 0)
+        shortSide = (shortSide | 7) + 1;
+
+    this->displayBufferSize = longSide * (shortSide / 8);
+
+#ifdef EINK_LIMIT_GHOSTING_PX
+    // allocate dirty pixel buffer same size as epaper buffers (rowBytes * height)
+    size_t rowBytes = (this->displayWidth + 7) / 8;
+    dirtyPixelsSize = rowBytes * this->displayHeight;
+    dirtyPixels = (uint8_t *)calloc(dirtyPixelsSize, 1);
+    ghostPixelCount = 0;
+#endif
+}
+
+EInkParallelDisplay::~EInkParallelDisplay()
+{
+#ifdef EINK_LIMIT_GHOSTING_PX
+    if (dirtyPixels) {
+        free(dirtyPixels);
+        dirtyPixels = nullptr;
+    }
+#endif
+    // If an async full update is running, wait for it to finish
+    if (asyncFullRunning.load()) {
+        // wait a short while for task to finish
+        for (int i = 0; i < 50 && asyncFullRunning.load(); ++i) {
+            delay(50);
+        }
+        if (asyncTaskHandle) {
+            // Let it finish or delete it
+            vTaskDelete(asyncTaskHandle);
+            asyncTaskHandle = nullptr;
+        }
+    }
+
+    delete epaper;
+}
+
+/*
+ * Called by the OLEDDisplay::init() path.
+ */
+bool EInkParallelDisplay::connect()
+{
+    LOG_INFO("Do EPD init");
+    if (!epaper) {
+        epaper = new FASTEPD;
+#if defined(T5_S3_EPAPER_PRO_V1)
+        epaper->initPanel(BB_PANEL_LILYGO_T5PRO, 28000000);
+#elif defined(T5_S3_EPAPER_PRO_V2)
+        epaper->initPanel(BB_PANEL_LILYGO_T5PRO_V2, 28000000);
+        // initialize all port 0 pins (0-7) as outputs / HIGH
+        for (int i = 0; i < 8; i++) {
+            epaper->ioPinMode(i, OUTPUT);
+            epaper->ioWrite(i, HIGH);
+        }
+#else
+#error "unsupported EPD device!"
+#endif
+    }
+
+    // epaper->setRotation(rotation); // does not work, messes up width/height
+    epaper->setMode(BB_MODE_1BPP);
+    epaper->clearWhite();
+    epaper->fullUpdate(true);
+
+#ifdef EINK_LIMIT_GHOSTING_PX
+    // After a full/clear the dirty tracking should be reset
+    resetGhostPixelTracking();
+#endif
+
+    return true;
+}
+
+/*
+ * sendCommand - simple passthrough (not required for epd_driver-based path)
+ */
+void EInkParallelDisplay::sendCommand(uint8_t com)
+{
+    LOG_DEBUG("EInkParallelDisplay::sendCommand %d", (int)com);
+}
+
+/*
+ * Start a background task that will perform a blocking fullUpdate(). This lets
+ * display() return quickly while the heavy refresh runs in the background.
+ */
+void EInkParallelDisplay::startAsyncFullUpdate(int clearMode)
+{
+    if (asyncFullRunning.load())
+        return; // already running
+
+    asyncFullRunning.store(true);
+    // pass 'this' as parameter
+    BaseType_t rc = xTaskCreatePinnedToCore(EInkParallelDisplay::asyncFullUpdateTask, "epd_full", 4096 / sizeof(StackType_t),
+                                            this, 2, &asyncTaskHandle,
+#if CONFIG_FREERTOS_UNICORE
+                                            0
+#else
+                                            1
+#endif
+    );
+    if (rc != pdPASS) {
+        LOG_WARN("Failed to create async full-update task, falling back to blocking update");
+        epaper->fullUpdate(clearMode, false);
+        epaper->backupPlane();
+        asyncFullRunning.store(false);
+        asyncTaskHandle = nullptr;
+    }
+}
+
+/*
+ * FreeRTOS task entry: runs the full update and then backs up plane.
+ */
+void EInkParallelDisplay::asyncFullUpdateTask(void *pvParameters)
+{
+    EInkParallelDisplay *self = static_cast<EInkParallelDisplay *>(pvParameters);
+    if (!self) {
+        vTaskDelete(nullptr);
+        return;
+    }
+
+    // choose CLEAR_SLOW occasionally
+    int clearMode = CLEAR_FAST;
+    if (self->fastRefreshCount >= EPD_FULLSLOW_PERIOD) {
+        clearMode = CLEAR_SLOW;
+        self->fastRefreshCount = 0;
+    } else {
+        // when running async full, treat it as a full so reset fast count
+        self->fastRefreshCount = 0;
+    }
+
+    self->epaper->fullUpdate(clearMode, false);
+    self->epaper->backupPlane();
+
+#ifdef EINK_LIMIT_GHOSTING_PX
+    // A full refresh clears ghosting state
+    self->resetGhostPixelTracking();
+#endif
+
+    self->asyncFullRunning.store(false);
+    self->asyncTaskHandle = nullptr;
+
+    // delete this task
+    vTaskDelete(nullptr);
+}
+
+/*
+ * Convert the OLEDDisplay buffer (vertical byte layout) into the 1bpp horizontal-bytes
+ * buffer used by the FASTEPD library. For performance we write directly into FASTEPD's
+ * currentBuffer() while comparing against previousBuffer() to detect changed rows.
+ * After conversion we call FASTEPD::partialUpdate() or FASTEPD::fullUpdate() according
+ * to a heuristic so only the minimal region is refreshed.
+ */
+void EInkParallelDisplay::display(void)
+{
+    const uint16_t w = this->displayWidth;
+    const uint16_t h = this->displayHeight;
+
+    // Simple rate limiting: avoid very-frequent responsive updates
+    uint32_t nowMs = millis();
+    if (lastUpdateMs != 0 && (nowMs - lastUpdateMs) < EPD_RESPONSIVE_MIN_MS) {
+        LOG_DEBUG("rate-limited, skipping update");
+        return;
+    }
+
+    // bytes per row in epd format (one byte = 8 horizontal pixels)
+    const uint32_t rowBytes = (w + 7) / 8;
+
+    // Get pointers to internal buffers
+    uint8_t *cur = epaper->currentBuffer();
+    uint8_t *prev = epaper->previousBuffer(); // may be NULL on first init
+
+    // Track changed row range while converting
+    int newTop = h;     // min changed row (initialized to out-of-range)
+    int newBottom = -1; // max changed row
+
+#ifdef FAST_EPD_PARTIAL_UPDATE_BUG
+    // Track changed byte column range (for clipped fullUpdate fallback)
+    int newLeftByte = (int)rowBytes;
+    int newRightByte = -1;
+#endif
+
+    // Compute a quick hash of the incoming OLED buffer (so we can skip identical frames)
+    uint32_t imageHash = 0;
+    uint32_t bufBytes = (w / 8) * h; // vertical-byte layout size
+    for (uint32_t bi = 0; bi < bufBytes; ++bi) {
+        imageHash ^= ((uint32_t)buffer[bi]) << (bi & 31);
+    }
+    if (imageHash == previousImageHash) {
+        // LOG_DEBUG("image identical to previous, skipping update");
+        return;
+    }
+
+#ifdef EINK_LIMIT_GHOSTING_PX
+    // reset ghost count for this conversion pass; we'll mark bits that change
+    ghostPixelCount = 0;
+#endif
+
+    // Convert: OLED buffer layout -> FASTEPD 1bpp horizontal-bytes layout into cur,
+    // comparing against prev when available to detect changes.
+    for (uint32_t y = 0; y < h; ++y) {
+        const uint32_t base = (y >> 3) * w;               // (y/8) * width
+        const uint8_t bitMask = (uint8_t)(1u << (y & 7)); // mask for this row in vertical-byte layout
+        const uint32_t rowBase = y * rowBytes;
+
+        // process full 8-pixel bytes
+        for (uint32_t xb = 0; xb < rowBytes; ++xb) {
+            uint32_t x0 = xb * 8;
+            // read up to 8 source bytes (vertical-byte per column)
+            uint8_t b0 = (x0 + 0 < w) ? buffer[base + x0 + 0] : 0;
+            uint8_t b1 = (x0 + 1 < w) ? buffer[base + x0 + 1] : 0;
+            uint8_t b2 = (x0 + 2 < w) ? buffer[base + x0 + 2] : 0;
+            uint8_t b3 = (x0 + 3 < w) ? buffer[base + x0 + 3] : 0;
+            uint8_t b4 = (x0 + 4 < w) ? buffer[base + x0 + 4] : 0;
+            uint8_t b5 = (x0 + 5 < w) ? buffer[base + x0 + 5] : 0;
+            uint8_t b6 = (x0 + 6 < w) ? buffer[base + x0 + 6] : 0;
+            uint8_t b7 = (x0 + 7 < w) ? buffer[base + x0 + 7] : 0;
+
+            // build output byte: MSB = leftmost pixel
+            uint8_t out = 0;
+            out |= (uint8_t)((b0 & bitMask) ? 0x80 : 0x00);
+            out |= (uint8_t)((b1 & bitMask) ? 0x40 : 0x00);
+            out |= (uint8_t)((b2 & bitMask) ? 0x20 : 0x00);
+            out |= (uint8_t)((b3 & bitMask) ? 0x10 : 0x00);
+            out |= (uint8_t)((b4 & bitMask) ? 0x08 : 0x00);
+            out |= (uint8_t)((b5 & bitMask) ? 0x04 : 0x00);
+            out |= (uint8_t)((b6 & bitMask) ? 0x02 : 0x00);
+            out |= (uint8_t)((b7 & bitMask) ? 0x01 : 0x00);
+
+            // handle partial byte at end of row by masking off invalid bits
+            uint8_t mask = 0xFF;
+            uint32_t bitsRemain = (w > x0) ? (w - x0) : 0;
+            if (bitsRemain > 0 && bitsRemain < 8) {
+                mask = (uint8_t)(0xFF << (8 - bitsRemain));
+                out &= mask;
+            }
+
+            // invert to FASTEPD polarity
+            out = (~out) & mask;
+
+            uint32_t pos = rowBase + xb;
+            uint8_t prevVal = prev ? (prev[pos] & mask) : 0x00;
+            // Consider this byte changed if previous buffer differs (or prev is null)
+            bool changed = (prev == nullptr) || (prevVal != out);
+
+#ifdef EINK_LIMIT_GHOSTING_PX
+            if (changed && prev)
+                markDirtyBits(prev, pos, mask, out);
+#endif
+
+            // mark row changed only if the previous buffer differs
+            if (changed) {
+                if (y < (uint32_t)newTop)
+                    newTop = y;
+                if ((int)y > newBottom)
+                    newBottom = y;
+#ifdef FAST_EPD_PARTIAL_UPDATE_BUG
+                // record changed column bytes
+                if ((int)xb < newLeftByte)
+                    newLeftByte = (int)xb;
+                if ((int)xb > newRightByte)
+                    newRightByte = (int)xb;
+#endif
+            }
+
+            // Always write the computed value into the current buffer (avoid leaving stale bytes)
+            cur[pos] = (cur[pos] & ~mask) | out;
+        }
+    }
+
+    // If nothing changed, avoid any panel update
+    if (newBottom < 0) {
+        LOG_DEBUG("no pixel changes detected, skipping update (conv)");
+        previousImageHash = imageHash; // still remember that frame
+        return;
+    }
+
+    // Choose partial vs full update using heuristic
+    // Decide if we should force a full update after many fast updates
+    bool forceFull = (fastRefreshCount >= EPD_FULLSLOW_PERIOD);
+
+#ifdef EINK_LIMIT_GHOSTING_PX
+    // If ghost pixels exceed limit, force a full update to clear ghosting
+    if (ghostPixelCount > ghostPixelLimit) {
+        LOG_WARN("ghost pixels %u > limit %u, forcing full refresh", ghostPixelCount, ghostPixelLimit);
+        forceFull = true;
+    }
+#endif
+
+    // Compute pixel bounds from newTop/newBottom
+    int startRow = (newTop / 8) * 8;
+    int endRow = (newBottom / 8) * 8 + 7;
+
+    LOG_DEBUG("EPD update rows=%d..%d alignedRows=%d..%d rowBytes=%u", newTop, newBottom, startRow, endRow, rowBytes);
+
+    if (epaper->getMode() == BB_MODE_1BPP && !forceFull && (newBottom - newTop) <= EPD_PARTIAL_THRESHOLD_ROWS) {
+        // Prefer partial update path if driver is reliable; otherwise use clipped fullUpdate fallback.
+#ifdef FAST_EPD_PARTIAL_UPDATE_BUG
+        // Workaround for FastEPD partial update bug: use clipped fullUpdate instead
+        // Build a pixel rectangle for a clipped fullUpdate using the changed columns
+        int startCol = (newLeftByte <= newRightByte) ? (newLeftByte * 8) : 0;
+        int endCol = (newLeftByte <= newRightByte) ? ((newRightByte + 1) * 8 - 1) : (w - 1);
+
+        BB_RECT rect{startCol, startRow, endCol - startCol + 1, endRow - startRow + 1};
+        // LOG_DEBUG("Using clipped fullUpdate rect x=%d y=%d w=%d h=%d", rect.x, rect.y, rect.w, rect.h);
+        epaper->fullUpdate(CLEAR_FAST, false, &rect);
+#else
+        // Use rows for partial update
+        LOG_DEBUG("calling partialUpdate startRow=%d endRow=%d", startRow, endRow);
+        epaper->partialUpdate(true, startRow, endRow);
+#endif
+        epaper->backupPlane();
+        fastRefreshCount++;
+    } else {
+        // Full update: run async if possible (startAsyncFullUpdate will fall back to blocking)
+        startAsyncFullUpdate(forceFull ? CLEAR_SLOW : CLEAR_FAST);
+    }
+
+    lastUpdateMs = millis();
+    previousImageHash = imageHash;
+
+    // Keep same behavior as before
+    lastDrawMsec = millis();
+}
+
+#ifdef EINK_LIMIT_GHOSTING_PX
+// markDirtyBits: mark per-bit dirty flags and update ghostPixelCount
+void EInkParallelDisplay::markDirtyBits(const uint8_t *prevBuf, uint32_t pos, uint8_t mask, uint8_t out)
+{
+    // defensive: need dirtyPixels allocated and prevBuf valid
+    if (!dirtyPixels || !prevBuf)
+        return;
+
+    // 'out' is in FASTEPD polarity (1 = black, 0 = white)
+    uint8_t newBlack = out & mask;    // bits that will be black now
+    uint8_t newWhite = (~out) & mask; // bits that will be white now
+
+    // previously recorded dirty bits for this byte
+    uint8_t before = dirtyPixels[pos];
+
+    // Ghost bits: bits that were previously marked dirty and are now being driven white
+    uint8_t ghostBits = before & newWhite;
+    if (ghostBits) {
+        ghostPixelCount += __builtin_popcount((unsigned)ghostBits);
+    }
+
+    // Only mark bits dirty when they turn black now (accumulate until a full refresh)
+    uint8_t newlyDirty = newBlack & (~before);
+    if (newlyDirty) {
+        dirtyPixels[pos] |= newlyDirty;
+    }
+}
+
+// reset ghost tracking (call after a full refresh)
+void EInkParallelDisplay::resetGhostPixelTracking()
+{
+    if (!dirtyPixels)
+        return;
+    memset(dirtyPixels, 0, dirtyPixelsSize);
+    ghostPixelCount = 0;
+}
+#endif
+
+/*
+ * forceDisplay: use lastDrawMsec
+ */
+bool EInkParallelDisplay::forceDisplay(uint32_t msecLimit)
+{
+    uint32_t now = millis();
+    if (lastDrawMsec == 0 || (now - lastDrawMsec) > msecLimit) {
+        display();
+        return true;
+    }
+    return false;
+}
+
+void EInkParallelDisplay::endUpdate()
+{
+    {
+        // ensure any async full update is started/completed
+        if (asyncFullRunning.load()) {
+            // nothing to do; background task will run and call backupPlane when done
+        } else {
+            epaper->fullUpdate(CLEAR_FAST, false);
+            epaper->backupPlane();
+#ifdef EINK_LIMIT_GHOSTING_PX
+            resetGhostPixelTracking();
+#endif
+        }
+    }
+}
+
+#endif
@@ -0,0 +1,69 @@
+#pragma once
+
+#include "configuration.h"
+
+#ifdef USE_EINK_PARALLELDISPLAY
+#include <OLEDDisplay.h>
+
+#include <atomic>
+#include <freertos/FreeRTOS.h>
+#include <freertos/task.h>
+
+class FASTEPD;
+
+/**
+ * Adapter for E-Ink 8-bit parallel displays (EPD), specifically devices supported by FastEPD library
+ */
+class EInkParallelDisplay : public OLEDDisplay
+{
+  public:
+    enum EpdRotation {
+        EPD_ROT_LANDSCAPE = 0,
+        EPD_ROT_PORTRAIT = 90,
+        EPD_ROT_INVERTED_LANDSCAPE = 180,
+        EPD_ROT_INVERTED_PORTRAIT = 270,
+    };
+
+    EInkParallelDisplay(uint16_t width, uint16_t height, EpdRotation rotation);
+    virtual ~EInkParallelDisplay();
+
+    // OLEDDisplay virtuals
+    bool connect() override;
+    void sendCommand(uint8_t com) override;
+    int getBufferOffset(void) override { return 0; }
+
+    void display(void) override;
+    bool forceDisplay(uint32_t msecLimit = 1000);
+    void endUpdate();
+
+  protected:
+    uint32_t lastDrawMsec = 0;
+    FASTEPD *epaper;
+
+  private:
+    // Async full-refresh support
+    std::atomic<bool> asyncFullRunning{false};
+    TaskHandle_t asyncTaskHandle = nullptr;
+    void startAsyncFullUpdate(int clearMode);
+    static void asyncFullUpdateTask(void *pvParameters);
+
+#ifdef EINK_LIMIT_GHOSTING_PX
+    // helpers
+    void resetGhostPixelTracking();
+    void markDirtyBits(const uint8_t *prevBuf, uint32_t pos, uint8_t mask, uint8_t out);
+    void countGhostPixelsAndMaybePromote(int &newTop, int &newBottom, bool &forceFull);
+
+    // per-bit dirty buffer (same format as epaper buffers): one bit == one pixel
+    uint8_t *dirtyPixels = nullptr;
+    size_t dirtyPixelsSize = 0;
+    uint32_t ghostPixelCount = 0;
+    uint32_t ghostPixelLimit = EINK_LIMIT_GHOSTING_PX;
+#endif
+
+    EpdRotation rotation;
+    uint32_t previousImageHash = 0;
+    uint32_t lastUpdateMs = 0;
+    int fastRefreshCount = 0;
+};
+
+#endif
@@ -0,0 +1,434 @@
+#include "configuration.h"
+#if HAS_SCREEN
+
+#include "graphics/EmoteRenderer.h"
+#include <algorithm>
+#include <cstring>
+
+namespace graphics
+{
+namespace EmoteRenderer
+{
+
+static inline int getStringWidth(OLEDDisplay *display, const char *text, size_t len)
+{
+#if defined(OLED_UA) || defined(OLED_RU)
+    return display->getStringWidth(text, len, true);
+#else
+    (void)len;
+    return display->getStringWidth(text);
+#endif
+}
+
+size_t utf8CharLen(uint8_t c)
+{
+    if ((c & 0xE0) == 0xC0)
+        return 2;
+    if ((c & 0xF0) == 0xE0)
+        return 3;
+    if ((c & 0xF8) == 0xF0)
+        return 4;
+    return 1;
+}
+
+static inline bool isPossibleEmoteLead(uint8_t c)
+{
+    // All supported emoji labels in emotes.cpp are currently in these UTF-8 lead ranges.
+    return c == 0xE2 || c == 0xF0;
+}
+
+static inline int getUtf8ChunkWidth(OLEDDisplay *display, const char *text, size_t len)
+{
+    char chunk[5] = {0, 0, 0, 0, 0};
+    if (len > 4)
+        len = 4;
+    memcpy(chunk, text, len);
+    return getStringWidth(display, chunk, len);
+}
+
+static inline bool isFE0FAt(const char *s, size_t pos, size_t len)
+{
+    return pos + 2 < len && static_cast<uint8_t>(s[pos]) == 0xEF && static_cast<uint8_t>(s[pos + 1]) == 0xB8 &&
+           static_cast<uint8_t>(s[pos + 2]) == 0x8F;
+}
+
+static inline bool isSkinToneAt(const char *s, size_t pos, size_t len)
+{
+    return pos + 3 < len && static_cast<uint8_t>(s[pos]) == 0xF0 && static_cast<uint8_t>(s[pos + 1]) == 0x9F &&
+           static_cast<uint8_t>(s[pos + 2]) == 0x8F &&
+           (static_cast<uint8_t>(s[pos + 3]) >= 0xBB && static_cast<uint8_t>(s[pos + 3]) <= 0xBF);
+}
+
+static inline size_t ignorableModifierLenAt(const char *s, size_t pos, size_t len)
+{
+    // Skip modifiers that do not change which bitmap we render.
+    if (isFE0FAt(s, pos, len))
+        return 3;
+    if (isSkinToneAt(s, pos, len))
+        return 4;
+    return 0;
+}
+
+const Emote *findEmoteByLabel(const char *label, const Emote *emoteSet, int emoteCount)
+{
+    if (!label || !*label)
+        return nullptr;
+
+    for (int i = 0; i < emoteCount; ++i) {
+        if (emoteSet[i].label && strcmp(label, emoteSet[i].label) == 0)
+            return &emoteSet[i];
+    }
+
+    return nullptr;
+}
+
+static bool matchAtIgnoringModifiers(const char *text, size_t textLen, size_t pos, const char *label, size_t &textConsumed,
+                                     size_t &matchScore)
+{
+    // Treat FE0F and skin-tone modifiers as optional while matching.
+    textConsumed = 0;
+    matchScore = 0;
+    if (!label || !*label || pos >= textLen)
+        return false;
+
+    const size_t labelLen = strlen(label);
+    size_t ti = pos;
+    size_t li = 0;
+
+    while (true) {
+        while (ti < textLen) {
+            const size_t skipLen = ignorableModifierLenAt(text, ti, textLen);
+            if (!skipLen)
+                break;
+            ti += skipLen;
+        }
+        while (li < labelLen) {
+            const size_t skipLen = ignorableModifierLenAt(label, li, labelLen);
+            if (!skipLen)
+                break;
+            li += skipLen;
+        }
+
+        if (li >= labelLen) {
+            while (ti < textLen) {
+                const size_t skipLen = ignorableModifierLenAt(text, ti, textLen);
+                if (!skipLen)
+                    break;
+                ti += skipLen;
+            }
+            textConsumed = ti - pos;
+            return textConsumed > 0;
+        }
+
+        if (ti >= textLen)
+            return false;
+
+        const uint8_t tc = static_cast<uint8_t>(text[ti]);
+        const uint8_t lc = static_cast<uint8_t>(label[li]);
+        const size_t tlen = utf8CharLen(tc);
+        const size_t llen = utf8CharLen(lc);
+
+        if (tlen != llen || ti + tlen > textLen || li + llen > labelLen)
+            return false;
+        if (memcmp(text + ti, label + li, tlen) != 0)
+            return false;
+
+        ti += tlen;
+        li += llen;
+        matchScore += llen;
+    }
+}
+
+const Emote *findEmoteAt(const char *text, size_t textLen, size_t pos, size_t &matchLen, const Emote *emoteSet, int emoteCount)
+{
+    // Prefer the longest matching label at this byte offset.
+    const Emote *matched = nullptr;
+    matchLen = 0;
+    size_t bestScore = 0;
+    if (!text || pos >= textLen)
+        return nullptr;
+
+    if (!isPossibleEmoteLead(static_cast<uint8_t>(text[pos])))
+        return nullptr;
+
+    for (int i = 0; i < emoteCount; ++i) {
+        const char *label = emoteSet[i].label;
+        if (!label || !*label)
+            continue;
+        if (static_cast<uint8_t>(label[0]) != static_cast<uint8_t>(text[pos]))
+            continue;
+
+        const size_t labelLen = strlen(label);
+        if (labelLen == 0)
+            continue;
+
+        size_t candidateLen = 0;
+        size_t candidateScore = 0;
+        if (pos + labelLen <= textLen && memcmp(text + pos, label, labelLen) == 0) {
+            candidateLen = labelLen;
+            candidateScore = labelLen;
+        } else if (matchAtIgnoringModifiers(text, textLen, pos, label, candidateLen, candidateScore)) {
+            // Matched with FE0F/skin tone modifiers treated as optional.
+        } else {
+            continue;
+        }
+
+        if (candidateScore > bestScore) {
+            matched = &emoteSet[i];
+            matchLen = candidateLen;
+            bestScore = candidateScore;
+        }
+    }
+
+    return matched;
+}
+
+static LineMetrics analyzeLineInternal(OLEDDisplay *display, const char *line, size_t lineLen, int fallbackHeight,
+                                       const Emote *emoteSet, int emoteCount, int emoteSpacing)
+{
+    // Scan once to collect width and tallest emote for this line.
+    LineMetrics metrics{0, fallbackHeight, false};
+    if (!line)
+        return metrics;
+
+    for (size_t i = 0; i < lineLen;) {
+        size_t matchLen = 0;
+        const Emote *matched = findEmoteAt(line, lineLen, i, matchLen, emoteSet, emoteCount);
+        if (matched) {
+            metrics.hasEmote = true;
+            metrics.tallestHeight = std::max(metrics.tallestHeight, matched->height);
+            if (display)
+                metrics.width += matched->width + emoteSpacing;
+            i += matchLen;
+            continue;
+        }
+
+        const size_t skipLen = ignorableModifierLenAt(line, i, lineLen);
+        if (skipLen) {
+            i += skipLen;
+            continue;
+        }
+
+        const size_t charLen = utf8CharLen(static_cast<uint8_t>(line[i]));
+        if (display)
+            metrics.width += getUtf8ChunkWidth(display, line + i, charLen);
+        i += charLen;
+    }
+
+    return metrics;
+}
+
+LineMetrics analyzeLine(OLEDDisplay *display, const char *line, int fallbackHeight, const Emote *emoteSet, int emoteCount,
+                        int emoteSpacing)
+{
+    return analyzeLineInternal(display, line, line ? strlen(line) : 0, fallbackHeight, emoteSet, emoteCount, emoteSpacing);
+}
+
+int maxEmoteHeight(const Emote *emoteSet, int emoteCount)
+{
+    int tallest = 0;
+    for (int i = 0; i < emoteCount; ++i) {
+        if (emoteSet[i].label && *emoteSet[i].label)
+            tallest = std::max(tallest, emoteSet[i].height);
+    }
+    return tallest;
+}
+
+int measureStringWithEmotes(OLEDDisplay *display, const char *line, const Emote *emoteSet, int emoteCount, int emoteSpacing)
+{
+    if (!display)
+        return 0;
+
+    if (!line || !*line)
+        return 0;
+
+    return analyzeLine(display, line, 0, emoteSet, emoteCount, emoteSpacing).width;
+}
+
+static int appendTextSpanAndMeasure(OLEDDisplay *display, int cursorX, int fontY, const char *text, size_t len, bool draw,
+                                    bool fauxBold)
+{
+    // Draw plain-text runs in chunks so UTF-8 stays intact.
+    if (!text || len == 0)
+        return cursorX;
+
+    char chunk[33];
+    size_t pos = 0;
+    while (pos < len) {
+        size_t chunkLen = 0;
+        while (pos + chunkLen < len) {
+            const size_t charLen = utf8CharLen(static_cast<uint8_t>(text[pos + chunkLen]));
+            if (chunkLen + charLen >= sizeof(chunk))
+                break;
+            chunkLen += charLen;
+        }
+
+        if (chunkLen == 0) {
+            chunkLen = std::min(len - pos, sizeof(chunk) - 1);
+        }
+
+        memcpy(chunk, text + pos, chunkLen);
+        chunk[chunkLen] = '\0';
+        if (draw) {
+            if (fauxBold)
+                display->drawString(cursorX + 1, fontY, chunk);
+            display->drawString(cursorX, fontY, chunk);
+        }
+        cursorX += getStringWidth(display, chunk, chunkLen);
+        pos += chunkLen;
+    }
+
+    return cursorX;
+}
+
+size_t truncateToWidth(OLEDDisplay *display, const char *line, char *out, size_t outSize, int maxWidth, const char *ellipsis,
+                       const Emote *emoteSet, int emoteCount, int emoteSpacing)
+{
+    if (!out || outSize == 0)
+        return 0;
+
+    out[0] = '\0';
+    if (!display || !line || maxWidth <= 0)
+        return 0;
+
+    const size_t lineLen = strlen(line);
+    const int suffixWidth =
+        (ellipsis && *ellipsis) ? measureStringWithEmotes(display, ellipsis, emoteSet, emoteCount, emoteSpacing) : 0;
+    const char *suffix = (ellipsis && suffixWidth <= maxWidth) ? ellipsis : "";
+    const size_t suffixLen = strlen(suffix);
+    const int availableWidth = maxWidth - (*suffix ? suffixWidth : 0);
+
+    if (measureStringWithEmotes(display, line, emoteSet, emoteCount, emoteSpacing) <= maxWidth) {
+        strncpy(out, line, outSize - 1);
+        out[outSize - 1] = '\0';
+        return strlen(out);
+    }
+
+    int used = 0;
+    size_t cut = 0;
+    for (size_t i = 0; i < lineLen;) {
+        // Keep whole emotes together when deciding where to cut.
+        int tokenWidth = 0;
+        size_t advance = 0;
+
+        if (isPossibleEmoteLead(static_cast<uint8_t>(line[i]))) {
+            size_t matchLen = 0;
+            const Emote *matched = findEmoteAt(line, lineLen, i, matchLen, emoteSet, emoteCount);
+            if (matched) {
+                tokenWidth = matched->width + emoteSpacing;
+                advance = matchLen;
+            }
+        }
+
+        if (advance == 0) {
+            const size_t skipLen = ignorableModifierLenAt(line, i, lineLen);
+            if (skipLen) {
+                i += skipLen;
+                cut = i;
+                continue;
+            }
+
+            const size_t charLen = utf8CharLen(static_cast<uint8_t>(line[i]));
+            tokenWidth = getUtf8ChunkWidth(display, line + i, charLen);
+            advance = charLen;
+        }
+
+        if (used + tokenWidth > availableWidth)
+            break;
+
+        used += tokenWidth;
+        i += advance;
+        cut = i;
+    }
+
+    if (cut == 0) {
+        strncpy(out, suffix, outSize - 1);
+        out[outSize - 1] = '\0';
+        return strlen(out);
+    }
+
+    size_t copyLen = cut;
+    if (copyLen > outSize - 1)
+        copyLen = outSize - 1;
+    if (suffixLen > 0 && copyLen + suffixLen > outSize - 1) {
+        copyLen = (outSize - 1 > suffixLen) ? (outSize - 1 - suffixLen) : 0;
+    }
+
+    memcpy(out, line, copyLen);
+    size_t totalLen = copyLen;
+    if (suffixLen > 0 && totalLen < outSize - 1) {
+        memcpy(out + totalLen, suffix, std::min(suffixLen, outSize - 1 - totalLen));
+        totalLen += std::min(suffixLen, outSize - 1 - totalLen);
+    }
+    out[totalLen] = '\0';
+    return totalLen;
+}
+
+void drawStringWithEmotes(OLEDDisplay *display, int x, int y, const char *line, int fontHeight, const Emote *emoteSet,
+                          int emoteCount, int emoteSpacing, bool fauxBold)
+{
+    if (!line)
+        return;
+
+    const size_t lineLen = strlen(line);
+    // Center text vertically when any emote is taller than the font.
+    const int maxIconHeight =
+        analyzeLineInternal(nullptr, line, lineLen, fontHeight, emoteSet, emoteCount, emoteSpacing).tallestHeight;
+    const int lineHeight = std::max(fontHeight, maxIconHeight);
+    const int fontY = y + (lineHeight - fontHeight) / 2;
+
+    int cursorX = x;
+    bool inBold = false;
+
+    for (size_t i = 0; i < lineLen;) {
+        // Toggle faux bold.
+        if (fauxBold && i + 1 < lineLen && line[i] == '*' && line[i + 1] == '*') {
+            inBold = !inBold;
+            i += 2;
+            continue;
+        }
+
+        const size_t skipLen = ignorableModifierLenAt(line, i, lineLen);
+        if (skipLen) {
+            i += skipLen;
+            continue;
+        }
+
+        size_t matchLen = 0;
+        const Emote *matched = findEmoteAt(line, lineLen, i, matchLen, emoteSet, emoteCount);
+        if (matched) {
+            const int iconY = y + (lineHeight - matched->height) / 2;
+            display->drawXbm(cursorX, iconY, matched->width, matched->height, matched->bitmap);
+            cursorX += matched->width + emoteSpacing;
+            i += matchLen;
+            continue;
+        }
+
+        size_t next = i;
+        while (next < lineLen) {
+            // Stop the text run before the next emote or bold marker.
+            if (fauxBold && next + 1 < lineLen && line[next] == '*' && line[next + 1] == '*')
+                break;
+
+            if (ignorableModifierLenAt(line, next, lineLen))
+                break;
+
+            size_t nextMatchLen = 0;
+            if (findEmoteAt(line, lineLen, next, nextMatchLen, emoteSet, emoteCount) != nullptr)
+                break;
+
+            next += utf8CharLen(static_cast<uint8_t>(line[next]));
+        }
+
+        if (next == i)
+            next += utf8CharLen(static_cast<uint8_t>(line[i]));
+
+        cursorX = appendTextSpanAndMeasure(display, cursorX, fontY, line + i, next - i, true, fauxBold && inBold);
+        i = next;
+    }
+}
+
+} // namespace EmoteRenderer
+} // namespace graphics
+
+#endif // HAS_SCREEN
@@ -0,0 +1,79 @@
+#pragma once
+#include "configuration.h"
+
+#if HAS_SCREEN
+#include "graphics/emotes.h"
+#include <Arduino.h>
+#include <OLEDDisplay.h>
+#include <string>
+#include <vector>
+
+namespace graphics
+{
+namespace EmoteRenderer
+{
+
+struct LineMetrics {
+    int width;
+    int tallestHeight;
+    bool hasEmote;
+};
+
+size_t utf8CharLen(uint8_t c);
+
+const Emote *findEmoteByLabel(const char *label, const Emote *emoteSet = emotes, int emoteCount = numEmotes);
+const Emote *findEmoteAt(const char *text, size_t textLen, size_t pos, size_t &matchLen, const Emote *emoteSet = emotes,
+                         int emoteCount = numEmotes);
+inline const Emote *findEmoteAt(const std::string &text, size_t pos, size_t &matchLen, const Emote *emoteSet = emotes,
+                                int emoteCount = numEmotes)
+{
+    return findEmoteAt(text.c_str(), text.length(), pos, matchLen, emoteSet, emoteCount);
+}
+
+LineMetrics analyzeLine(OLEDDisplay *display, const char *line, int fallbackHeight = 0, const Emote *emoteSet = emotes,
+                        int emoteCount = numEmotes, int emoteSpacing = 1);
+inline LineMetrics analyzeLine(OLEDDisplay *display, const std::string &line, int fallbackHeight = 0,
+                               const Emote *emoteSet = emotes, int emoteCount = numEmotes, int emoteSpacing = 1)
+{
+    return analyzeLine(display, line.c_str(), fallbackHeight, emoteSet, emoteCount, emoteSpacing);
+}
+int maxEmoteHeight(const Emote *emoteSet = emotes, int emoteCount = numEmotes);
+
+int measureStringWithEmotes(OLEDDisplay *display, const char *line, const Emote *emoteSet = emotes, int emoteCount = numEmotes,
+                            int emoteSpacing = 1);
+inline int measureStringWithEmotes(OLEDDisplay *display, const std::string &line, const Emote *emoteSet = emotes,
+                                   int emoteCount = numEmotes, int emoteSpacing = 1)
+{
+    return measureStringWithEmotes(display, line.c_str(), emoteSet, emoteCount, emoteSpacing);
+}
+size_t truncateToWidth(OLEDDisplay *display, const char *line, char *out, size_t outSize, int maxWidth,
+                       const char *ellipsis = "...", const Emote *emoteSet = emotes, int emoteCount = numEmotes,
+                       int emoteSpacing = 1);
+inline std::string truncateToWidth(OLEDDisplay *display, const std::string &line, int maxWidth,
+                                   const std::string &ellipsis = "...", const Emote *emoteSet = emotes,
+                                   int emoteCount = numEmotes, int emoteSpacing = 1)
+{
+    if (!display || maxWidth <= 0)
+        return "";
+    if (measureStringWithEmotes(display, line.c_str(), emoteSet, emoteCount, emoteSpacing) <= maxWidth)
+        return line;
+
+    std::vector<char> out(line.length() + ellipsis.length() + 1, '\0');
+    truncateToWidth(display, line.c_str(), out.data(), out.size(), maxWidth, ellipsis.c_str(), emoteSet, emoteCount,
+                    emoteSpacing);
+    return std::string(out.data());
+}
+
+void drawStringWithEmotes(OLEDDisplay *display, int x, int y, const char *line, int fontHeight, const Emote *emoteSet = emotes,
+                          int emoteCount = numEmotes, int emoteSpacing = 1, bool fauxBold = true);
+inline void drawStringWithEmotes(OLEDDisplay *display, int x, int y, const std::string &line, int fontHeight,
+                                 const Emote *emoteSet = emotes, int emoteCount = numEmotes, int emoteSpacing = 1,
+                                 bool fauxBold = true)
+{
+    drawStringWithEmotes(display, x, y, line.c_str(), fontHeight, emoteSet, emoteCount, emoteSpacing, fauxBold);
+}
+
+} // namespace EmoteRenderer
+} // namespace graphics
+
+#endif // HAS_SCREEN
@@ -27,6 +27,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "configuration.h"
 #include "meshUtils.h"
 #if HAS_SCREEN
+#include "EInkParallelDisplay.h"
 #include <OLEDDisplay.h>

 #include "DisplayFormatters.h"
@@ -364,12 +365,14 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(HACKADAY_COMMUNICATOR)
    dispdev = new TFTDisplay(address.address, -1, -1, geometry,
                             (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
-#elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
+#elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY) && !defined(USE_EINK_PARALLELDISPLAY)
    dispdev = new EInkDisplay(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif defined(USE_EINK) && defined(USE_EINK_DYNAMICDISPLAY)
    dispdev = new EInkDynamicDisplay(address.address, -1, -1, geometry,
                                     (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
+#elif defined(USE_EINK_PARALLELDISPLAY)
+    dispdev = new EInkParallelDisplay(EPD_WIDTH, EPD_HEIGHT, EInkParallelDisplay::EPD_ROT_PORTRAIT);
 #elif defined(USE_ST7567)
    dispdev = new ST7567Wire(address.address, -1, -1, geometry,
                             (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
@@ -433,12 +436,15 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
            PMU->enablePowerOutput(XPOWERS_ALDO2);
 #endif

-#if defined(MUZI_BASE)
+// some screens seem to need a kick in the pants to turn back on
+#if defined(MUZI_BASE) || defined(M5STACK_CARDPUTER_ADV)
            dispdev->init();
            dispdev->setBrightness(brightness);
            dispdev->flipScreenVertically();
            dispdev->resetDisplay();
+#ifdef SCREEN_12V_ENABLE
            digitalWrite(SCREEN_12V_ENABLE, HIGH);
+#endif
            delay(100);
 #endif
 #if !ARCH_PORTDUINO
@@ -462,9 +468,11 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #if defined(HELTEC_TRACKER_V1_X) || defined(HELTEC_WIRELESS_TRACKER_V2)
            ui->init();
 #endif
-#ifdef USE_ST7789
+#if defined(USE_ST7789) && defined(VTFT_LEDA)
+#ifdef VTFT_CTRL
            pinMode(VTFT_CTRL, OUTPUT);
            digitalWrite(VTFT_CTRL, LOW);
+#endif
            ui->init();
 #ifdef ESP_PLATFORM
            analogWrite(VTFT_LEDA, BRIGHTNESS_DEFAULT);
@@ -506,8 +514,12 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #ifdef USE_ST7789
            SPI1.end();
 #if defined(ARCH_ESP32)
+#ifdef VTFT_LEDA
            pinMode(VTFT_LEDA, ANALOG);
+#endif
+#ifdef VTFT_CTRL
            pinMode(VTFT_CTRL, ANALOG);
+#endif
            pinMode(ST7789_RESET, ANALOG);
            pinMode(ST7789_RS, ANALOG);
            pinMode(ST7789_NSS, ANALOG);
@@ -750,7 +762,11 @@ void Screen::forceDisplay(bool forceUiUpdate)
    }

    // Tell EInk class to update the display
+#if defined(USE_EINK_PARALLELDISPLAY)
+    static_cast<EInkParallelDisplay *>(dispdev)->forceDisplay();
+#elif defined(USE_EINK)
    static_cast<EInkDisplay *>(dispdev)->forceDisplay();
+#endif
 #else
    // No delay between UI frame rendering
    if (forceUiUpdate) {
@@ -989,8 +1005,10 @@ void Screen::setScreensaverFrames(FrameCallback einkScreensaver)
        ui->update();
    } while (ui->getUiState()->lastUpdate < startUpdate);

+#if defined(USE_EINK_PARALLELDISPLAY)
+    static_cast<EInkParallelDisplay *>(dispdev)->forceDisplay(0);
+#elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
    // Old EInkDisplay class
-#if !defined(USE_EINK_DYNAMICDISPLAY)
    static_cast<EInkDisplay *>(dispdev)->forceDisplay(0); // Screen::forceDisplay(), but override rate-limit
 #endif

@@ -1002,7 +1020,7 @@ void Screen::setScreensaverFrames(FrameCallback einkScreensaver)
 #ifdef EINK_HASQUIRK_GHOSTING
    EINK_ADD_FRAMEFLAG(dispdev, COSMETIC); // Really ugly to see ghosting from "screen paused"
 #else
-    EINK_ADD_FRAMEFLAG(dispdev, RESPONSIVE); // Really nice to wake screen with a fast-refresh
+    EINK_ADD_FRAMEFLAG(dispdev, RESPONSIVE);              // Really nice to wake screen with a fast-refresh
 #endif
 }
 #endif
@@ -765,7 +765,11 @@ class Screen : public concurrency::OSThread
    DebugInfo debugInfo;

    /// Display device
+#ifdef USE_ST7789
+    ST7789Spi *dispdev;
+#else
    OLEDDisplay *dispdev;
+#endif

    /// UI helper for rendering to frames and switching between them
    OLEDDisplayUi *ui;
@@ -20,7 +20,7 @@
 #include "graphics/fonts/OLEDDisplayFontsGR.h"
 #endif

-#if defined(CROWPANEL_ESP32S3_5_EPAPER) && defined(USE_EINK)
+#if (defined(CROWPANEL_ESP32S3_5_EPAPER) || defined(T5_S3_EPAPER_PRO)) && defined(USE_EINK)
 #include "graphics/fonts/EinkDisplayFonts.h"
 #endif

@@ -90,7 +90,7 @@

 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) ||             \
-     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) &&                                                                   \
+     defined(USE_ST7796) || defined(HACKADAY_COMMUNICATOR)) &&                                                                   \
    !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL FONT_MEDIUM_LOCAL // Height: 19
@@ -106,7 +106,7 @@
 #define FONT_LARGE FONT_LARGE_LOCAL   // Height: 28
 #endif

-#if defined(CROWPANEL_ESP32S3_5_EPAPER) && defined(USE_EINK)
+#if defined(CROWPANEL_ESP32S3_5_EPAPER) || defined(T5_S3_EPAPER_PRO)
 #undef FONT_SMALL
 #undef FONT_MEDIUM
 #undef FONT_LARGE
@@ -121,11 +121,10 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
        }

        // === Screen Title ===
-        display->setTextAlignment(TEXT_ALIGN_CENTER);
-        display->drawString(SCREEN_WIDTH / 2, y, titleStr);
-        if (config.display.heading_bold) {
-            display->drawString((SCREEN_WIDTH / 2) + 1, y, titleStr);
-        }
+        const char *headerTitle = titleStr ? titleStr : "";
+        const int titleWidth = UIRenderer::measureStringWithEmotes(display, headerTitle);
+        const int titleX = (SCREEN_WIDTH - titleWidth) / 2;
+        UIRenderer::drawStringWithEmotes(display, titleX, y, headerTitle, FONT_HEIGHT_SMALL, 1, config.display.heading_bold);
    }
    display->setTextAlignment(TEXT_ALIGN_LEFT);

@@ -515,4 +514,4 @@ std::string sanitizeString(const std::string &input)
 }

 } // namespace graphics
-#endif
+#endif
@@ -1348,7 +1348,7 @@ void TFTDisplay::sendCommand(uint8_t com)
            digitalWrite(portduino_config.displayBacklight.pin, TFT_BACKLIGHT_ON);
 #elif defined(HACKADAY_COMMUNICATOR)
        tft->displayOn();
-#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
+#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE) && !defined(HELTEC_MESH_NODE_T096)
        tft->wakeup();
        tft->powerSaveOff();
 #endif
@@ -1359,7 +1359,7 @@ void TFTDisplay::sendCommand(uint8_t com)
 #ifdef UNPHONE
        unphone.backlight(true); // using unPhone library
 #endif
-#ifdef RAK14014
+#if defined(RAK14014) || defined(HELTEC_MESH_NODE_T096)
 #elif !defined(M5STACK) && !defined(ST7789_CS) &&                                                                                \
    !defined(HACKADAY_COMMUNICATOR) // T-Deck gets brightness set in Screen.cpp in the handleSetOn function
        tft->setBrightness(172);
@@ -1375,7 +1375,7 @@ void TFTDisplay::sendCommand(uint8_t com)
            digitalWrite(portduino_config.displayBacklight.pin, !TFT_BACKLIGHT_ON);
 #elif defined(HACKADAY_COMMUNICATOR)
        tft->displayOff();
-#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
+#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE) && !defined(HELTEC_MESH_NODE_T096)
        tft->sleep();
        tft->powerSaveOn();
 #endif
@@ -1386,7 +1386,7 @@ void TFTDisplay::sendCommand(uint8_t com)
 #ifdef UNPHONE
        unphone.backlight(false); // using unPhone library
 #endif
-#ifdef RAK14014
+#if defined(RAK14014) || defined(HELTEC_MESH_NODE_T096)
 #elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
        tft->setBrightness(0);
 #endif
@@ -1401,7 +1401,7 @@ void TFTDisplay::sendCommand(uint8_t com)

 void TFTDisplay::setDisplayBrightness(uint8_t _brightness)
 {
-#ifdef RAK14014
+#if defined(RAK14014) || defined(HELTEC_MESH_NODE_T096)
    // todo
 #elif !defined(HACKADAY_COMMUNICATOR)
    tft->setBrightness(_brightness);
@@ -1421,7 +1421,7 @@ bool TFTDisplay::hasTouch(void)
 {
 #ifdef RAK14014
    return true;
-#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
+#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR) && !defined(HELTEC_MESH_NODE_T096)
    return tft->touch() != nullptr;
 #else
    return false;
@@ -1440,7 +1440,7 @@ bool TFTDisplay::getTouch(int16_t *x, int16_t *y)
    } else {
        return false;
    }
-#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
+#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR) && !defined(HELTEC_MESH_NODE_T096)
    return tft->getTouch(x, y);
 #else
    return false;
@@ -1457,7 +1457,7 @@ bool TFTDisplay::connect()
 {
    concurrency::LockGuard g(spiLock);
    LOG_INFO("Do TFT init");
-#ifdef RAK14014
+#if defined(RAK14014) || defined(HELTEC_MESH_NODE_T096)
    tft = new TFT_eSPI;
 #elif defined(HACKADAY_COMMUNICATOR)
    bus = new Arduino_ESP32SPI(TFT_DC, TFT_CS, 38 /* SCK */, 21 /* MOSI */, GFX_NOT_DEFINED /* MISO */, HSPI /* spi_num */);
@@ -1494,7 +1494,7 @@ bool TFTDisplay::connect()
    ft6336u.begin();
    pinMode(SCREEN_TOUCH_INT, INPUT_PULLUP);
    attachInterrupt(digitalPinToInterrupt(SCREEN_TOUCH_INT), rak14014_tpIntHandle, FALLING);
-#elif defined(T_DECK) || defined(PICOMPUTER_S3) || defined(CHATTER_2)
+#elif defined(T_DECK) || defined(PICOMPUTER_S3) || defined(CHATTER_2) || defined(HELTEC_MESH_NODE_T096)
    tft->setRotation(1); // T-Deck has the TFT in landscape
 #elif defined(T_WATCH_S3)
    tft->setRotation(2); // T-Watch S3 left-handed orientation
--- a/Show More
+++ b/Show More