Merge branch 'develop' into esp32-h2

.clusterfuzzlite/Dockerfile

@@ -20,7 +20,7 @@ ENV PIP_ROOT_USER_ACTION=ignore
 RUN apt-get update && apt-get install --no-install-recommends -y \
         cmake git zip libgpiod-dev libbluetooth-dev libi2c-dev \
         libunistring-dev libmicrohttpd-dev libgnutls28-dev libgcrypt20-dev \
-        libusb-1.0-0-dev libssl-dev pkg-config libsqlite3-dev libsdl2-dev && \
+        libusb-1.0-0-dev libssl-dev pkg-config && \
     apt-get clean && rm -rf /var/lib/apt/lists/* && \
     pip install --no-cache-dir -U \
         platformio==6.1.16 \

.envrc

@@ -1 +0,0 @@
-use nix

.github/actions/build-variant/action.yml

@@ -76,7 +76,7 @@ runs:
         done
 
     - name: PlatformIO ${{ inputs.arch }} download cache
-      uses: actions/cache@v5
+      uses: actions/cache@v4
       with:
         path: ~/.platformio/.cache
         key: pio-cache-${{ inputs.arch }}-${{ hashFiles('.github/actions/**', '**.ini') }}
@@ -100,7 +100,7 @@ runs:
       id: version
 
     - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v7
+      uses: actions/upload-artifact@v5
       with:
         name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}
         overwrite: true

.github/actions/setup-base/action.yml

@@ -8,6 +8,8 @@ runs:
       uses: actions/checkout@v6
       with:
         submodules: recursive
+        ref: ${{github.event.pull_request.head.ref}}
+        repository: ${{github.event.pull_request.head.repo.full_name}}
 
     - name: Install dependencies
       shell: bash

.github/copilot-instructions.md

@@ -1,314 +0,0 @@
-# Meshtastic Firmware - Copilot Instructions
-
-This document provides context and guidelines for AI assistants working with the Meshtastic firmware codebase.
-
-## Project Overview
-
-Meshtastic is an open-source LoRa mesh networking project for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware enables text messaging, location sharing, and telemetry over a decentralized mesh network.
-
-### Supported Hardware Platforms
-
-- **ESP32** (ESP32, ESP32-S3, ESP32-C3) - Most common platform
-- **nRF52** (nRF52840, nRF52833) - Low power Nordic chips
-- **RP2040/RP2350** - Raspberry Pi Pico variants
-- **STM32WL** - STM32 with integrated LoRa
-- **Linux/Portduino** - Native Linux builds (Raspberry Pi, etc.)
-
-### Supported Radio Chips
-
-- **SX1262/SX1268** - Sub-GHz LoRa (868/915 MHz regions)
-- **SX1280** - 2.4 GHz LoRa
-- **LR1110/LR1120/LR1121** - Wideband radios (sub-GHz and 2.4 GHz capable, but not simultaneously)
-- **RF95** - Legacy RFM95 modules
-- **LLCC68** - Low-cost LoRa
-
-### MQTT Integration
-
-MQTT provides a bridge between Meshtastic mesh networks and the internet, enabling nodes with network connectivity to share messages with remote meshes or external services.
-
-#### Key Components
-
-- **`src/mqtt/MQTT.cpp`** - Main MQTT client singleton, handles connection and message routing
-- **`src/mqtt/ServiceEnvelope.cpp`** - Protobuf wrapper for mesh packets sent over MQTT
-- **`moduleConfig.mqtt`** - MQTT module configuration
-
-#### MQTT Topic Structure
-
-Messages are published/subscribed using a hierarchical topic format:
-
-```
-{root}/{channel_id}/{gateway_id}
-```
-
-- `root` - Configurable prefix (default: `msh`)
-- `channel_id` - Channel name/identifier
-- `gateway_id` - Node ID of the publishing gateway
-
-#### Configuration Defaults (from `Default.h`)
-
-```cpp
-#define default_mqtt_address "mqtt.meshtastic.org"
-#define default_mqtt_username "meshdev"
-#define default_mqtt_password "large4cats"
-#define default_mqtt_root "msh"
-#define default_mqtt_encryption_enabled true
-#define default_mqtt_tls_enabled false
-```
-
-#### Key Concepts
-
-- **Uplink** - Mesh packets sent TO the MQTT broker (controlled by `uplink_enabled` per channel)
-- **Downlink** - MQTT messages received and injected INTO the mesh (controlled by `downlink_enabled` per channel)
-- **Encryption** - When `encryption_enabled` is true, only encrypted packets are sent; plaintext JSON is disabled
-- **ServiceEnvelope** - Protobuf wrapper containing packet + channel_id + gateway_id for routing
-- **JSON Support** - Optional JSON encoding for integration with external systems (disabled on nRF52 by default)
-
-#### PKI Messages
-
-PKI (Public Key Infrastructure) messages have special handling:
-
-- Accepted on a special "PKI" channel
-- Allow encrypted DMs between nodes that discovered each other on downlink-enabled channels
-
-## Project Structure
-
-```
-firmware/
-├── src/                    # Main source code
-│   ├── main.cpp           # Application entry point
-│   ├── mesh/              # Core mesh networking
-│   │   ├── NodeDB.*       # Node database management
-│   │   ├── Router.*       # Packet routing
-│   │   ├── Channels.*     # Channel management
-│   │   ├── *Interface.*   # Radio interface implementations
-│   │   └── generated/     # Protobuf generated code
-│   ├── modules/           # Feature modules (Position, Telemetry, etc.)
-│   ├── gps/               # GPS handling
-│   ├── graphics/          # Display drivers and UI
-│   ├── platform/          # Platform-specific code
-│   ├── input/             # Input device handling
-│   └── concurrency/       # Threading utilities
-├── variants/              # Hardware variant definitions
-│   ├── esp32/            # ESP32 variants
-│   ├── esp32s3/          # ESP32-S3 variants
-│   ├── nrf52/            # nRF52 variants
-│   └── rp2xxx/           # RP2040/RP2350 variants
-├── protobufs/            # Protocol buffer definitions
-├── boards/               # Custom PlatformIO board definitions
-└── bin/                  # Build and utility scripts
-```
-
-## Coding Conventions
-
-### General Style
-
-- Follow existing code style - run `trunk fmt` before commits
-- Prefer `LOG_DEBUG`, `LOG_INFO`, `LOG_WARN`, `LOG_ERROR` for logging
-- Use `assert()` for invariants that should never fail
-
-### Naming Conventions
-
-- Classes: `PascalCase` (e.g., `PositionModule`, `NodeDB`)
-- Functions/Methods: `camelCase` (e.g., `sendOurPosition`, `getNodeNum`)
-- Constants/Defines: `UPPER_SNAKE_CASE` (e.g., `MAX_INTERVAL`, `ONE_DAY`)
-- Member variables: `camelCase` (e.g., `lastGpsSend`, `nodeDB`)
-- Config defines: `USERPREFS_*` for user-configurable options
-
-### Key Patterns
-
-#### Module System
-
-Modules inherit from `MeshModule` or `ProtobufModule<T>` and implement:
-
-- `handleReceivedProtobuf()` - Process incoming packets
-- `allocReply()` - Generate response packets
-- `runOnce()` - Periodic task execution (returns next run interval in ms)
-
-```cpp
-class MyModule : public ProtobufModule<meshtastic_MyMessage>
-{
-  protected:
-    virtual bool handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_MyMessage *msg) override;
-    virtual int32_t runOnce() override;
-};
-```
-
-#### Configuration Access
-
-- `config.*` - Device configuration (LoRa, position, power, etc.)
-- `moduleConfig.*` - Module-specific configuration
-- `channels.*` - Channel configuration and management
-
-#### Default Values
-
-Use the `Default` class helpers in `src/mesh/Default.h`:
-
-- `Default::getConfiguredOrDefaultMs(configured, default)` - Returns ms, using default if configured is 0
-- `Default::getConfiguredOrMinimumValue(configured, min)` - Enforces minimum values
-- `Default::getConfiguredOrDefaultMsScaled(configured, default, numNodes)` - Scales based on network size
-
-#### Thread Safety
-
-- Use `concurrency::Lock` for mutex protection
-- Radio SPI access uses `SPILock`
-- Prefer `OSThread` for background tasks
-
-### Hardware Variants
-
-Each hardware variant has:
-
-- `variant.h` - Pin definitions and hardware capabilities
-- `platformio.ini` - Build configuration
-- Optional: `pins_arduino.h`, `rfswitch.h`
-
-Key defines in variant.h:
-
-```cpp
-#define USE_SX1262          // Radio chip selection
-#define HAS_GPS 1           // Hardware capabilities
-#define LORA_CS 36          // Pin assignments
-#define SX126X_DIO1 14      // Radio-specific pins
-```
-
-### Protobuf Messages
-
-- Defined in `protobufs/meshtastic/*.proto`
-- Generated code in `src/mesh/generated/`
-- Regenerate with `bin/regen-protos.sh`
-- Message types prefixed with `meshtastic_`
-
-### Conditional Compilation
-
-```cpp
-#if !MESHTASTIC_EXCLUDE_GPS        // Feature exclusion
-#ifdef ARCH_ESP32                   // Architecture-specific
-#if defined(USE_SX1262)            // Radio-specific
-#ifdef HAS_SCREEN                   // Hardware capability
-#if USERPREFS_EVENT_MODE           // User preferences
-```
-
-## Build System
-
-Uses **PlatformIO** with custom scripts:
-
-- `bin/platformio-pre.py` - Pre-build script
-- `bin/platformio-custom.py` - Custom build logic
-
-Build commands:
-
-```bash
-pio run -e tbeam              # Build specific target
-pio run -e tbeam -t upload    # Build and upload
-pio run -e native             # Build native/Linux version
-```
-
-## Common Tasks
-
-### Adding a New Module
-
-1. Create `src/modules/MyModule.cpp` and `.h`
-2. Inherit from appropriate base class
-3. Register in `src/modules/Modules.cpp`
-4. Add protobuf messages if needed in `protobufs/`
-
-### Adding a New Hardware Variant
-
-1. Create directory under `variants/<arch>/<name>/`
-2. Add `variant.h` with pin definitions
-3. Add `platformio.ini` with build config
-4. Reference common configs with `extends`
-
-### Modifying Configuration Defaults
-
-- Check `src/mesh/Default.h` for default value defines
-- Check `src/mesh/NodeDB.cpp` for initialization logic
-- Consider `isDefaultChannel()` checks for public channel restrictions
-
-## Important Considerations
-
-### Traffic Management
-
-The mesh network has limited bandwidth. When modifying broadcast intervals:
-
-- Respect minimum intervals on default/public channels
-- Use `Default::getConfiguredOrMinimumValue()` to enforce minimums
-- Consider `numOnlineNodes` scaling for congestion control
-
-### Power Management
-
-Many devices are battery-powered:
-
-- Use `IF_ROUTER(routerVal, normalVal)` for role-based defaults
-- Check `config.power.is_power_saving` for power-saving modes
-- Implement proper `sleep()` methods in radio interfaces
-
-### Channel Security
-
-- `channels.isDefaultChannel(index)` - Check if using default/public settings
-- Default channels get stricter rate limits to prevent abuse
-- Private channels may have relaxed limits
-
-## GitHub Actions CI/CD
-
-The project uses GitHub Actions extensively for CI/CD. Key workflows are in `.github/workflows/`:
-
-### Core CI Workflows
-
-- **`main_matrix.yml`** - Main CI pipeline, runs on push to `master`/`develop` and PRs
-  - Uses `bin/generate_ci_matrix.py` to dynamically generate build targets
-  - Builds all supported hardware variants
-  - PRs build a subset (`--level pr`) for faster feedback
-
-- **`trunk_check.yml`** - Code quality checks on PRs
-  - Runs Trunk.io for linting and formatting
-  - Must pass before merge
-
-- **`tests.yml`** - End-to-end and hardware tests
-  - Runs daily on schedule
-  - Includes native tests and hardware-in-the-loop testing
-
-- **`test_native.yml`** - Native platform unit tests
-  - Runs `pio test -e native`
-
-### Release Workflows
-
-- **`release_channels.yml`** - Triggered on GitHub release publish
-  - Builds Docker images
-  - Packages for PPA (Ubuntu), OBS (openSUSE), and COPR (Fedora)
-  - Handles Alpha/Beta/Stable release channels
-
-- **`nightly.yml`** - Nightly builds from develop branch
-
-- **`docker_build.yml`** / **`docker_manifest.yml`** - Docker image builds
-
-### Build Matrix Generation
-
-The CI uses `bin/generate_ci_matrix.py` to dynamically select which targets to build:
-
-```bash
-# Generate full build matrix
-./bin/generate_ci_matrix.py all
-
-# Generate PR-level matrix (subset for faster builds)
-./bin/generate_ci_matrix.py all --level pr
-```
-
-Variants can specify their support level in `platformio.ini`:
-
-- `custom_meshtastic_support_level = 1` - Actively supported, built on every PR
-- `custom_meshtastic_support_level = 2` - Supported, built on merge to main branches
-- `board_level = extra` - Extra builds, only on full releases
-
-### Running Workflows Locally
-
-Most workflows can be triggered manually via `workflow_dispatch` for testing.
-
-## Testing
-
-- Unit tests in `test/` directory
-- Run with `pio test -e native`
-- Use `bin/test-simulator.sh` for simulation testing
-
-## Resources
-
-- [Documentation](https://meshtastic.org/docs/)

.github/pull_request_template.md

@@ -4,16 +4,16 @@
 
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
   to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
-  is appreciated." This will allow other devs to potentially save you time by not accidentally duplicating work etc...
+  is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
-- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the Linux version),
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the linux version),
   because it automatically follows our indentation rules and its auto reformatting will not cause spurious changes to lines.
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
 - Please also enable "Allow edits by maintainers".
 - Please do not submit untested code.
-- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and community members can help test your changes.
+- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and commnunity members can help test your changes.
 - If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord
 
 ## 🤝 Attestations

.github/workflows/build_debian_src.yml

@@ -16,7 +16,8 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
+  packages: write
 
 jobs:
   build-debian-src:
@@ -27,6 +28,8 @@ jobs:
         with:
           submodules: recursive
           path: meshtasticd
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Install deps
         shell: bash
@@ -39,8 +42,7 @@ jobs:
           sudo mk-build-deps --install --remove --tool='apt-get -o Debug::pkgProblemResolver=yes --no-install-recommends --yes' debian/control
 
       - name: Import GPG key
-        if: github.event_name != 'pull_request' && github.event_name != 'pull_request_target'
+        uses: crazy-max/ghaction-import-gpg@v6
-        uses: crazy-max/ghaction-import-gpg@v7
         with:
           gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
         id: gpg
@@ -58,11 +60,11 @@ jobs:
         run: debian/ci_pack_sdeb.sh
         env:
           SERIES: ${{ inputs.series }}
-          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid || '' }}
+          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid }}
           PKG_VERSION: ${{ steps.version.outputs.deb }}
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           overwrite: true

.github/workflows/build_firmware.yml

@@ -21,11 +21,30 @@ jobs:
     # Use 'arctastic' self-hosted runner pool when building in the main repo
     runs-on: ${{ github.repository_owner == 'meshtastic' && 'arctastic' || 'ubuntu-latest' }}
     outputs:
-      artifact-id: ${{ steps.upload-firmware.outputs.artifact-id }}
+      artifact-id: ${{ steps.upload.outputs.artifact-id }}
     steps:
       - uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Set OTA firmware source and target
+        if: startsWith(inputs.platform, 'esp32')
+        id: ota_dir
+        env:
+          PIO_PLATFORM: ${{ inputs.platform }}
+        run: |
+          if [ "$PIO_PLATFORM" = "esp32s3" ]; then
+            echo "src=firmware-s3.bin" >> $GITHUB_OUTPUT
+            echo "tgt=release/bleota-s3.bin" >> $GITHUB_OUTPUT
+          elif [ "$PIO_PLATFORM" = "esp32c3" ] || [ "$PIO_PLATFORM" = "esp32c6" ]; then
+            echo "src=firmware-c3.bin" >> $GITHUB_OUTPUT
+            echo "tgt=release/bleota-c3.bin" >> $GITHUB_OUTPUT
+          elif [ "$PIO_PLATFORM" = "esp32" ]; then
+            echo "src=firmware.bin" >> $GITHUB_OUTPUT
+            echo "tgt=release/bleota.bin" >> $GITHUB_OUTPUT
+          fi
 
       - name: Build ${{ inputs.platform }}
         id: build
@@ -34,83 +53,23 @@ jobs:
           pio_platform: ${{ inputs.platform }}
           pio_env: ${{ inputs.pio_env }}
           pio_target: build
+          ota_firmware_source: ${{ steps.ota_dir.outputs.src || '' }}
+          ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
 
-      - name: ESP32 - Download Unified OTA firmware
+      - name: Echo manifest from release/firmware-*.mt.json to job summary
-        # Currently only esp32 and esp32s3 use the unified ota
+        if: ${{ always() }}
-        if: inputs.platform == 'esp32' || inputs.platform == 'esp32s3'
-        id: dl-ota-unified
-        env:
-          PIO_PLATFORM: ${{ inputs.platform }}
-          PIO_ENV: ${{ inputs.pio_env }}
-          OTA_URL: https://github.com/meshtastic/esp32-unified-ota/releases/latest/download/mt-${{ inputs.platform }}-ota.bin
-        working-directory: release
-        run: |
-          curl -L -o "mt-$PIO_PLATFORM-ota.bin" $OTA_URL
-
-      - name: ESP32-C* - Download BLE-Only OTA firmware
-        if: inputs.platform == 'esp32c3' || inputs.platform == 'esp32c6'
-        id: dl-ota-ble
-        env:
-          PIO_ENV: ${{ inputs.pio_env }}
-          OTA_URL: https://github.com/meshtastic/firmware-ota/releases/latest/download/firmware-c3.bin
-        working-directory: release
-        run: |
-          curl -L -o bleota-c3.bin $OTA_URL
-
-      - name: Update manifest with OTA file
-        if: inputs.platform == 'esp32' || inputs.platform == 'esp32s3' || inputs.platform == 'esp32c3' || inputs.platform == 'esp32c6'
-        working-directory: release
-        env:
-          PIO_PLATFORM: ${{ inputs.platform }}
-        run: |
-          # Determine OTA filename based on platform
-          if [[ "$PIO_PLATFORM" == "esp32" || "$PIO_PLATFORM" == "esp32s3" ]]; then
-            OTA_FILE="mt-${PIO_PLATFORM}-ota.bin"
-          else
-            OTA_FILE="bleota-c3.bin"
-          fi
-
-          # Check if OTA file exists
-          if [[ ! -f "$OTA_FILE" ]]; then
-            echo "OTA file $OTA_FILE not found, skipping manifest update"
-            exit 0
-          fi
-
-          # Calculate MD5 and size
-          if command -v md5sum &> /dev/null; then
-            OTA_MD5=$(md5sum "$OTA_FILE" | cut -d' ' -f1)
-          else
-            OTA_MD5=$(md5 -q "$OTA_FILE")
-          fi
-          OTA_SIZE=$(stat -f%z "$OTA_FILE" 2>/dev/null || stat -c%s "$OTA_FILE")
-
-          # Find and update manifest file
-          for manifest in firmware-*.mt.json; do
-            if [[ -f "$manifest" ]]; then
-              echo "Updating $manifest with $OTA_FILE (md5: $OTA_MD5, size: $OTA_SIZE)"
-              # Add OTA entry to files array if not already present
-              jq --arg name "$OTA_FILE" --arg md5 "$OTA_MD5" --argjson bytes "$OTA_SIZE" --arg part "app1" \
-                'if .files | map(select(.name == $name)) | length == 0 then .files += [{"name": $name, "md5": $md5, "bytes": $bytes, "part_name": $part}] else . end' \
-                "$manifest" > "${manifest}.tmp" && mv "${manifest}.tmp" "$manifest"
-            fi
-          done
-
-      - name: Job summary
         env:
           PIO_ENV: ${{ inputs.pio_env }}
         run: |
-          echo "## $PIO_ENV" >> $GITHUB_STEP_SUMMARY
+          echo "## Manifest: \`$PIO_ENV\`" >> $GITHUB_STEP_SUMMARY
-          echo "<details><summary><strong>Manifest</strong></summary>" >> $GITHUB_STEP_SUMMARY
-          echo '' >> $GITHUB_STEP_SUMMARY
           echo '```json' >> $GITHUB_STEP_SUMMARY
           cat release/firmware-*.mt.json >> $GITHUB_STEP_SUMMARY
           echo '' >> $GITHUB_STEP_SUMMARY
           echo '```' >> $GITHUB_STEP_SUMMARY
-          echo "</details>" >> $GITHUB_STEP_SUMMARY
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v5
-        id: upload-firmware
+        id: upload
         with:
           name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
           overwrite: true
@@ -123,12 +82,3 @@ jobs:
             release/*.zip
             release/device-*.sh
             release/device-*.bat
-
-      - name: Store manifests as an artifact
-        uses: actions/upload-artifact@v7
-        id: upload-manifest
-        with:
-          name: manifest-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
-          overwrite: true
-          path: |
-            release/*.mt.json

.github/workflows/build_one_target.yml

@@ -4,14 +4,9 @@ on:
   workflow_dispatch:
     inputs:
       # trunk-ignore(checkov/CKV_GHA_7)
-      target:
-        type: string
-        required: false
-        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
       arch:
         type: choice
         options:
-          - all
           - esp32
           - esp32s3
           - esp32c3
@@ -20,18 +15,32 @@ on:
           - rp2040
           - rp2350
           - stm32
-        description: Choose an arch to limit the search, or 'all' to search all architectures.
+      target:
-        default: all
+        type: string
+        required: false
+        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
+      # find-target:
+      #   type: boolean
+      #   default: true
+      #   description: 'Find the available targets'
 
 permissions: read-all
 
 jobs:
   find-targets:
+    if: ${{ inputs.target == '' }}
     strategy:
       fail-fast: false
       matrix:
         arch:
-          - all
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
     runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v6
@@ -42,37 +51,14 @@ jobs:
       - run: pip install -U platformio
       - name: Generate matrix
         id: jsonStep
-        env:
-          BUILDTARGET: ${{ inputs.target }}
-          MATRIXARCH: ${{ inputs.arch }}
         run: |
           TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level extra)
-          if [ "$BUILDTARGET" = "" ]; then
+          echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
-            echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
+          echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
-            echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
+          echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
-            echo "Arch: $MATRIXARCH" >> $GITHUB_STEP_SUMMARY
+          echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
-            echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
+          echo "Targets:" >> $GITHUB_STEP_SUMMARY
-            echo "## 🎯 The following target boards are available to build:" >> $GITHUB_STEP_SUMMARY
+          echo $TARGETS | jq -r 'sort_by(.board) |.[] | "- " + .board' >> $GITHUB_STEP_SUMMARY
-            echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
-            echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
-            echo $TARGETS | jq -r 'sort_by(.board) | sort_by(.platform) |.[] | "| " + .platform + " | " + .board + " |" ' >> $GITHUB_STEP_SUMMARY
-          else
-            echo "We build this one:" >> $GITHUB_STEP_SUMMARY
-            ARCH=$(echo "$TARGETS" | jq --arg BUILDTARGET "$BUILDTARGET" -r '.[] | select(.board==$BUILDTARGET) | .platform')
-            echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
-            echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
-            echo "| $ARCH | "$BUILDTARGET" |" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            if [[ "$ARCH" == "" ]]; then
-              echo "## ❌ Error: Target "$BUILDTARGET" not found!" >> $GITHUB_STEP_SUMMARY
-            else
-              echo "## ✅ Target "$BUILDTARGET" found, proceeding to build." >> $GITHUB_STEP_SUMMARY
-            fi
-            echo "You may need to refresh this page to make the built firmware appear below." >> $GITHUB_STEP_SUMMARY
-            echo "arch=$ARCH" >> $GITHUB_OUTPUT
-          fi
-    outputs:
-      arch: ${{ steps.jsonStep.outputs.arch }}
 
   version:
     if: ${{ inputs.target != '' }}
@@ -92,16 +78,16 @@ jobs:
 
   build:
     if: ${{ inputs.target != '' && inputs.arch != 'native' }}
-    needs: [version, find-targets]
+    needs: [version]
     uses: ./.github/workflows/build_firmware.yml
     with:
       version: ${{ needs.version.outputs.long }}
       pio_env: ${{ inputs.target }}
-      platform: ${{ needs.find-targets.outputs.arch }}
+      platform: ${{ inputs.arch }}
 
   gather-artifacts:
     permissions:
-      contents: read
+      contents: write
       pull-requests: write
     runs-on: ubuntu-latest
     needs: [version, build]
@@ -112,7 +98,7 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-*-*
@@ -125,7 +111,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -141,7 +127,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-*-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -160,7 +146,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
           overwrite: true

.github/workflows/daily_packaging.yml

@@ -5,7 +5,7 @@ on:
   workflow_dispatch:
   push:
     branches:
-      - develop # Default branch, same as 'cron' above
+      - master
     paths:
       - debian/**
       - "*.rpkg"
@@ -16,7 +16,7 @@ on:
       - .github/workflows/hook_copr.yml
 
 permissions:
-  contents: read
+  contents: write
   packages: write
 
 jobs:
@@ -35,8 +35,8 @@ jobs:
         series:
           - jammy # 22.04 LTS
           - noble # 24.04 LTS
+          - plucky # 25.04
           - questing # 25.10
-          - resolute # 26.04 LTS
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: ppa:meshtastic/daily

.github/workflows/docker_build.yml

@@ -37,7 +37,7 @@ on:
         value: ${{ jobs.docker-build.outputs.digest }}
 
 permissions:
-  contents: read
+  contents: write
   packages: write
 
 jobs:
@@ -50,6 +50,8 @@ jobs:
         uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Get release version string
         run: |
@@ -58,16 +60,16 @@ jobs:
 
       - name: Docker login
         if: ${{ inputs.push }}
-        uses: docker/login-action@v4
+        uses: docker/login-action@v3
         with:
           username: meshtastic
           password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
 
       - name: Set up QEMU
-        uses: docker/setup-qemu-action@v4
+        uses: docker/setup-qemu-action@v3
 
       - name: Docker setup
-        uses: docker/setup-buildx-action@v4
+        uses: docker/setup-buildx-action@v3
 
       - name: Sanitize platform string
         id: sanitize_platform
@@ -76,7 +78,7 @@ jobs:
 
       - name: Docker tag
         id: meta
-        uses: docker/metadata-action@v6
+        uses: docker/metadata-action@v5
         with:
           images: meshtastic/meshtasticd
           tags: |
@@ -84,7 +86,7 @@ jobs:
           flavor: latest=false
 
       - name: Docker build and push
-        uses: docker/build-push-action@v7
+        uses: docker/build-push-action@v6
         id: docker_variant
         with:
           context: .

.github/workflows/docker_manifest.yml

@@ -12,7 +12,7 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
   packages: write
 
 jobs:
@@ -86,6 +86,8 @@ jobs:
         uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Get release version string
         run: |
@@ -137,14 +139,14 @@ jobs:
         id: tags
 
       - name: Docker login
-        uses: docker/login-action@v4
+        uses: docker/login-action@v3
         with:
           username: meshtastic
           password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
 
       - name: Docker meta (Debian)
         id: meta_debian
-        uses: docker/metadata-action@v6
+        uses: docker/metadata-action@v5
         with:
           images: meshtastic/meshtasticd
           tags: |
@@ -165,7 +167,7 @@ jobs:
 
       - name: Docker meta (Alpine)
         id: meta_alpine
-        uses: docker/metadata-action@v6
+        uses: docker/metadata-action@v5
         with:
           images: meshtastic/meshtasticd
           tags: |

.github/workflows/first_time_contributor.yml

@@ -1,47 +0,0 @@
-name: Welcome First-Time Contributor
-
-on:
-  issues:
-    types: opened
-  pull_request_target:
-    types: opened
-
-permissions: {}
-
-jobs:
-  welcome:
-    runs-on: ubuntu-latest
-    permissions:
-      issues: write # Required to post comments and labels on issues
-      pull-requests: write # Required to post comments and labels on PRs
-    steps:
-      - uses: plbstl/first-contribution@v4
-        with:
-          labels: first-contribution
-          issue-opened-msg: |
-            ### @{fc-author}, Welcome to Meshtastic! :wave:
-
-            Thanks for opening your first issue. If it's helpful, an easy way
-            to get logs is the "Open Serial Monitor" button on the [Web Flasher](https://flasher.meshtastic.org).
-
-            If you have ideas for features, note that we often debate big ideas
-            in the [discussions tab](https://github.com/meshtastic/firmware/discussions/categories/ideas)
-            first. This tracker tends to be for ideas that have community
-            consensus and a clear implementation.
-
-            We're very active [on discord](https://discord.com/invite/meshtastic),
-            especially the \#firmware and \#alphanauts-testing channels. If you'll
-            be around for a while, we'd love to see you there!
-
-            Welcome to the community! :heart:
-
-          pr-opened-msg: |
-            ### @{fc-author}, Welcome to Meshtastic!
-
-            Thanks for opening your first pull request. We really appreciate it.
-
-            We discuss work as a team in discord, please join us in the [#firmware channel](https://discord.com/invite/meshtastic).
-            There's a big backlog of patches at the moment. If you have time,
-            please help us with some code review and testing of [other PRs](https://github.com/meshtastic/firmware/pulls)!
-
-            Welcome to the team :smile:

.github/workflows/hook_copr.yml

@@ -11,7 +11,8 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
+  packages: write
 
 jobs:
   build-copr-hook:
@@ -21,6 +22,8 @@ jobs:
         uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{ github.ref }}
+          repository: ${{ github.repository }}
 
       - name: Trigger COPR build
         uses: vidplace7/copr-build@main

.github/workflows/main_matrix.yml

@@ -8,28 +8,23 @@ on:
     branches:
       - master
       - develop
-      - pioarduino # Remove when merged // use `feature/` in the future.
       - event/*
-      - feature/*
     paths-ignore:
       - "**.md"
       - version.properties
 
-  pull_request:
+  # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
+  pull_request_target:
     branches:
       - master
       - develop
-      - pioarduino # Remove when merged // use `feature/` in the future.
       - event/*
-      - feature/*
     paths-ignore:
       - "**.md"
       #- "**.yml"
 
   workflow_dispatch:
 
-permissions: read-all
-
 jobs:
   setup:
     strategy:
@@ -82,19 +77,16 @@ jobs:
       fail-fast: false
       matrix:
         check: ${{ fromJson(needs.setup.outputs.check) }}
-    # Use 'arctastic' self-hosted runner pool when checking in the main repo
+
-    runs-on: ${{ github.repository_owner == 'meshtastic' && 'arctastic' || 'ubuntu-latest' }}
+    runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     steps:
       - uses: actions/checkout@v6
-        with:
+      - name: Build base
-          submodules: recursive
+        id: base
+        uses: ./.github/actions/setup-base
       - name: Check ${{ matrix.check.board }}
-        uses: meshtastic/gh-action-firmware@main
+        run: bin/check-all.sh ${{ matrix.check.board }}
-        with:
-          pio_platform: ${{ matrix.check.platform }}
-          pio_env: ${{ matrix.check.board }}
-          pio_target: check
 
   build:
     needs: [setup, version]
@@ -125,16 +117,9 @@ jobs:
 
   test-native:
     if: ${{ !contains(github.ref_name, 'event/') && github.repository == 'meshtastic/firmware' }}
-    permissions: # Needed for dorny/test-reporter.
-      contents: read
-      actions: read
-      checks: write
     uses: ./.github/workflows/test_native.yml
 
   docker:
-    permissions: # Needed for pushing to GHCR.
-      contents: read
-      packages: write
     strategy:
       fail-fast: false
       matrix:
@@ -159,6 +144,9 @@ jobs:
   gather-artifacts:
     # trunk-ignore(checkov/CKV2_GHA_1)
     if: github.repository == 'meshtastic/firmware'
+    permissions:
+      contents: write
+      pull-requests: write
     strategy:
       fail-fast: false
       matrix:
@@ -176,8 +164,11 @@ jobs:
     steps:
       - name: Checkout code
         uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -187,7 +178,7 @@ jobs:
         run: ls -R
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -201,11 +192,10 @@ jobs:
             ./device-*.bat
             ./littlefs-*.bin
             ./bleota*bin
-            ./mt-*-ota.bin
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v6
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -224,58 +214,21 @@ jobs:
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
           path: ./*.elf
           retention-days: 30
 
-  shame:
+      - uses: scruplelesswizard/comment-artifact@main
-    if: github.repository == 'meshtastic/firmware'
+        if: ${{ github.event_name == 'pull_request' }}
-    continue-on-error: true
-    runs-on: ubuntu-latest
-    needs: [build]
-    steps:
-      - uses: actions/checkout@v6
-        if: github.event_name == 'pull_request'
         with:
-          filter: blob:none # means we download all the git history but none of the commit (except ones with checkout like the head)
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          fetch-depth: 0
+          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-      - name: Download the current manifests
+          github-token: ${{ secrets.GITHUB_TOKEN }}
-        uses: actions/download-artifact@v8
-        with:
-          path: ./manifests-new/
-          pattern: manifest-*
-          merge-multiple: true
-      - name: Upload combined manifests for later commit and global stats crunching.
-        uses: actions/upload-artifact@v7
-        id: upload-manifest
-        with:
-          name: manifests-${{ github.sha }}
-          overwrite: true
-          path: manifests-new/*.mt.json
-      - name: Find the merge base
-        if: github.event_name == 'pull_request'
-        run: echo "MERGE_BASE=$(git merge-base "origin/$base" "$head")" >> $GITHUB_ENV
-        env:
-          base: ${{ github.base_ref }}
-          head: ${{ github.sha }}
-      # Currently broken (for-loop through EVERY artifact -- rate limiting)
-      # - name: Download the old manifests
-      #   if: github.event_name == 'pull_request'
-      #   run: gh run download -R "$repo" --name "manifests-$merge_base" --dir manifest-old/
-      #   env:
-      #     GH_TOKEN: ${{ github.token }}
-      #     merge_base: ${{ env.MERGE_BASE }}
-      #     repo: ${{ github.repository }}
-      # - name: Do scan and post comment
-      #   if: github.event_name == 'pull_request'
-      #   run: python3 bin/shame.py ${{ github.event.pull_request.number }} manifests-old/ manifests-new/
 
   release-artifacts:
-    permissions: # Needed for 'gh release upload'.
-      contents: write
     runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     outputs:
@@ -289,24 +242,6 @@ jobs:
     steps:
       - name: Checkout
         uses: actions/checkout@v6
-        with:
-          fetch-depth: 0
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - name: Generate release notes
-        id: release_notes
-        run: |
-          chmod +x ./bin/generate_release_notes.py
-          NOTES=$(./bin/generate_release_notes.py ${{ needs.version.outputs.long }})
-          echo "notes<<EOF" >> $GITHUB_OUTPUT
-          echo "$NOTES" >> $GITHUB_OUTPUT
-          echo "EOF" >> $GITHUB_OUTPUT
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Create release
         uses: softprops/action-gh-release@v2
@@ -316,17 +251,18 @@ jobs:
           prerelease: true
           name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
           tag_name: v${{ needs.version.outputs.long }}
-          body: ${{ steps.release_notes.outputs.notes }}
+          body: |
+            Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v6
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v6
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -350,7 +286,7 @@ jobs:
           }' > firmware-${{ needs.version.outputs.long }}.json
 
       - name: Save Release manifest artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v5
         with:
           name: manifest-${{ needs.version.outputs.long }}
           overwrite: true
@@ -367,8 +303,6 @@ jobs:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
   release-firmware:
-    permissions: # Needed for 'gh release upload'.
-      contents: write
     strategy:
       fail-fast: false
       matrix:
@@ -393,7 +327,7 @@ jobs:
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -410,7 +344,7 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v8
+      - uses: actions/download-artifact@v6
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -442,8 +376,6 @@ jobs:
     steps:
       - name: Checkout
         uses: actions/checkout@v6
-        with:
-          fetch-depth: 0
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -451,25 +383,18 @@ jobs:
           python-version: 3.x
 
       - name: Get firmware artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v6
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true
           path: ./publish
 
       - name: Get manifest artifact
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v6
         with:
           pattern: manifest-${{ needs.version.outputs.long }}
           path: ./publish
 
-      - name: Generate release notes
-        run: |
-          chmod +x ./bin/generate_release_notes.py
-          ./bin/generate_release_notes.py ${{ needs.version.outputs.long }} > ./publish/release_notes.md
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
       - name: Publish firmware to meshtastic.github.io
         uses: peaceiris/actions-gh-pages@v4
         env:

.github/workflows/merge_queue.yml

@@ -0,0 +1,371 @@
+name: Merge Queue
+# Not sure how concurrency works in merge_queue, removing for now.
+# concurrency:
+#   group: merge-queue-${{ github.head_ref || github.run_id }}
+#   cancel-in-progress: true
+on:
+  # Merge group is a special trigger that is used to trigger the workflow when a merge group is created.
+  merge_group:
+
+jobs:
+  setup:
+    strategy:
+      fail-fast: true
+      matrix:
+        arch:
+          - all
+          - check
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v6
+      - uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+          cache: pip
+      - run: pip install -U platformio
+      - name: Generate matrix
+        id: jsonStep
+        run: |
+          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
+          else  
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level pr)
+          fi
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
+          echo "${{matrix.arch}}=$TARGETS" >> $GITHUB_OUTPUT
+    outputs:
+      all: ${{ steps.jsonStep.outputs.all }}
+      check: ${{ steps.jsonStep.outputs.check }}
+
+  version:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v6
+      - name: Get release version string
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        id: version
+        env:
+          BUILD_LOCATION: local
+    outputs:
+      long: ${{ steps.version.outputs.long }}
+      deb: ${{ steps.version.outputs.deb }}
+
+  check:
+    needs: setup
+    strategy:
+      fail-fast: true
+      matrix:
+        check: ${{ fromJson(needs.setup.outputs.check) }}
+
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name != 'workflow_dispatch' }}
+    steps:
+      - uses: actions/checkout@v6
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+      - name: Check ${{ matrix.check.board }}
+        run: bin/check-all.sh ${{ matrix.check.board }}
+
+  build:
+    needs: [setup, version]
+    strategy:
+      matrix:
+        build: ${{ fromJson(needs.setup.outputs.all) }}
+    uses: ./.github/workflows/build_firmware.yml
+    with:
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.build.board }}
+      platform: ${{ matrix.build.platform }}
+
+  build-debian-src:
+    if: github.repository == 'meshtastic/firmware'
+    uses: ./.github/workflows/build_debian_src.yml
+    with:
+      series: UNRELEASED
+      build_location: local
+    secrets: inherit
+
+  package-pio-deps-native-tft:
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    uses: ./.github/workflows/package_pio_deps.yml
+    with:
+      pio_env: native-tft
+    secrets: inherit
+
+  test-native:
+    if: ${{ !contains(github.ref_name, 'event/') }}
+    uses: ./.github/workflows/test_native.yml
+
+  docker:
+    strategy:
+      fail-fast: false
+      matrix:
+        distro: [debian, alpine]
+        platform: [linux/amd64, linux/arm64, linux/arm/v7]
+        pio_env: [native, native-tft]
+        exclude:
+          - distro: alpine
+            platform: linux/arm/v7
+          - pio_env: native-tft
+            platform: linux/arm64
+          - pio_env: native-tft
+            platform: linux/arm/v7
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: ${{ matrix.distro }}
+      platform: ${{ matrix.platform }}
+      runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
+      pio_env: ${{ matrix.pio_env }}
+      push: false
+
+  gather-artifacts:
+    # trunk-ignore(checkov/CKV2_GHA_1)
+    permissions:
+      contents: write
+      pull-requests: write
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+    runs-on: ubuntu-latest
+    needs: [version, build]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - uses: actions/download-artifact@v6
+        with:
+          path: ./
+          pattern: firmware-${{matrix.arch}}-*
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Move files up
+        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+
+      - name: Repackage in single firmware zip
+        uses: actions/upload-artifact@v5
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          overwrite: true
+          path: |
+            ./firmware-*.bin
+            ./firmware-*.uf2
+            ./firmware-*.hex
+            ./firmware-*.zip
+            ./device-*.sh
+            ./device-*.bat
+            ./littlefs-*.bin
+            ./bleota*bin
+            ./Meshtastic_nRF52_factory_erase*.uf2
+          retention-days: 30
+
+      - uses: actions/download-artifact@v6
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-update.sh || true
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - name: Repackage in single elfs zip
+        uses: actions/upload-artifact@v5
+        with:
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          overwrite: true
+          path: ./*.elf
+          retention-days: 30
+
+      - uses: scruplelesswizard/comment-artifact@main
+        if: ${{ github.event_name == 'pull_request' }}
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+
+  release-artifacts:
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    outputs:
+      upload_url: ${{ steps.create_release.outputs.upload_url }}
+    needs:
+      - version
+      - gather-artifacts
+      - build-debian-src
+      - package-pio-deps-native-tft
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+
+      - name: Create release
+        uses: softprops/action-gh-release@v2
+        id: create_release
+        with:
+          draft: true
+          prerelease: true
+          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
+          tag_name: v${{ needs.version.outputs.long }}
+          body: |
+            Autogenerated by github action, developer should edit as required before publishing...
+
+      - name: Download source deb
+        uses: actions/download-artifact@v6
+        with:
+          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
+          merge-multiple: true
+          path: ./output/debian-src
+
+      - name: Download `native-tft` pio deps
+        uses: actions/download-artifact@v6
+        with:
+          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output/pio-deps-native-tft
+
+      - name: Zip Linux sources
+        working-directory: output
+        run: |
+          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
+          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
+
+      # For diagnostics
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Add Linux sources to GtiHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
+        run: |
+          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
+          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+  release-firmware:
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-artifacts, version]
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+
+      - uses: actions/download-artifact@v6
+        with:
+          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-update.sh || true
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - uses: actions/download-artifact@v6
+        with:
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./elfs
+
+      - name: Zip debug elfs
+        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
+
+      # For diagnostics
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Add bins and debug elfs to GitHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
+        run: |
+          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+  publish-firmware:
+    runs-on: ubuntu-24.04
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-firmware, version]
+    env:
+      targets: |-
+        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+
+      - uses: actions/download-artifact@v6
+        with:
+          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./publish
+
+      - name: Publish firmware to meshtastic.github.io
+        uses: peaceiris/actions-gh-pages@v4
+        env:
+          # On event/* branches, use the event name as the destination prefix
+          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
+        with:
+          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
+          external_repository: meshtastic/meshtastic.github.io
+          publish_branch: master
+          publish_dir: ./publish
+          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
+          keep_files: true
+          user_name: github-actions[bot]
+          user_email: github-actions[bot]@users.noreply.github.com
+          commit_message: ${{ needs.version.outputs.long }}
+          enable_jekyll: true

.github/workflows/models_issue_triage.yml

@@ -1,213 +0,0 @@
-name: Issue Triage (Models)
-
-on:
-  issues:
-    types: [opened]
-
-permissions:
-  issues: write
-  models: read
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.event.issue.number }}
-  cancel-in-progress: true
-
-jobs:
-  triage:
-    if: ${{ github.repository == 'meshtastic/firmware' && github.event.issue.user.type != 'Bot' }}
-    runs-on: ubuntu-latest
-    steps:
-      # ─────────────────────────────────────────────────────────────────────────
-      # Step 1: Quality check (spam/AI-slop detection) - runs first, exits early if spam
-      # ─────────────────────────────────────────────────────────────────────────
-      - name: Detect spam or low-quality content
-        uses: actions/ai-inference@v2
-        id: quality
-        continue-on-error: true
-        with:
-          max-tokens: 20
-          prompt: |
-            Is this GitHub issue spam, AI-generated slop, or low quality?
-
-            Title: ${{ github.event.issue.title }}
-            Body: ${{ github.event.issue.body }}
-
-            Respond with exactly one of: spam, ai-generated, needs-review, ok
-          system-prompt: You detect spam and low-quality contributions. Be conservative - only flag obvious spam or AI slop.
-          model: openai/gpt-4o-mini
-
-      - name: Apply quality label if needed
-        if: steps.quality.outputs.response != '' && steps.quality.outputs.response != 'ok'
-        uses: actions/github-script@v8
-        env:
-          QUALITY_LABEL: ${{ steps.quality.outputs.response }}
-        with:
-          script: |
-            const label = (process.env.QUALITY_LABEL || '').trim().toLowerCase();
-            const labelMeta = {
-              'spam': { color: 'd73a4a', description: 'Possible spam' },
-              'ai-generated': { color: 'fbca04', description: 'Possible AI-generated low-quality content' },
-              'needs-review': { color: 'f9d0c4', description: 'Needs human review' },
-            };
-            const meta = labelMeta[label];
-            if (!meta) return;
-
-            // Ensure label exists
-            try {
-              await github.rest.issues.getLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label });
-            } catch (e) {
-              if (e.status !== 404) throw e;
-              await github.rest.issues.createLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label, color: meta.color, description: meta.description });
-            }
-
-            // Apply label
-            await github.rest.issues.addLabels({ owner: context.repo.owner, repo: context.repo.repo, issue_number: context.payload.issue.number, labels: [label] });
-
-            // Set output to skip remaining steps
-            core.setOutput('is_spam', 'true');
-
-      # ─────────────────────────────────────────────────────────────────────────
-      # Step 2: Duplicate detection - only if not spam
-      # ─────────────────────────────────────────────────────────────────────────
-      - name: Detect duplicate issues
-        if: steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == ''
-        uses: pelikhan/action-genai-issue-dedup@bdb3b5d9451c1090ffcdf123d7447a5e7c7a2528 # v0.0.19
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-
-      # ─────────────────────────────────────────────────────────────────────────
-      # Step 3: Completeness check + auto-labeling (combined into one AI call)
-      # ─────────────────────────────────────────────────────────────────────────
-      - name: Determine if completeness check should be skipped
-        if: steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == ''
-        uses: actions/github-script@v8
-        id: check-skip
-        with:
-          script: |
-            const title = (context.payload.issue.title || '').toLowerCase();
-            const labels = (context.payload.issue.labels || []).map(label => label.name);
-            const hasFeatureRequest = title.includes('feature request');
-            const hasEnhancement = labels.includes('enhancement');
-            const shouldSkip = hasFeatureRequest && hasEnhancement;
-            core.setOutput('should_skip', shouldSkip ? 'true' : 'false');
-
-      - name: Analyze issue completeness and determine labels
-        if: (steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == '') && steps.check-skip.outputs.should_skip != 'true'
-        uses: actions/ai-inference@v2
-        id: analysis
-        continue-on-error: true
-        with:
-          prompt: |
-            Analyze this GitHub issue for completeness and determine if it needs labels.
-
-            IMPORTANT: Distinguish between:
-            - Device/firmware bugs (crashes, reboots, lockups, radio/GPS/display/power issues) - these need device logs
-            - Build/release/packaging issues (missing files, CI failures, download problems) - these do NOT need device logs
-            - Documentation or website issues - these do NOT need device logs
-
-            If this is a device/firmware bug, request device logs and explain how to get them:
-
-            Web Flasher logs:
-            - Go to https://flasher.meshtastic.org
-            - Connect the device via USB and click Connect
-            - Open the device console/log output, reproduce the problem, then copy/download and attach/paste the logs
-
-            Meshtastic CLI logs:
-            - Run: meshtastic --port <serial-port> --noproto
-            - Reproduce the problem, then copy/paste the terminal output
-
-            Also request key context if missing: device model/variant, firmware version, region, steps to reproduce, expected vs actual.
-
-            Respond ONLY with valid JSON (no markdown, no code fences):
-            {"complete": true, "comment": "", "label": "none"}
-            OR
-            {"complete": false, "comment": "Your helpful comment", "label": "needs-logs"}
-
-            Use "needs-logs" ONLY if this is a device/firmware bug AND no logs are attached.
-            Use "needs-info" if basic info like firmware version or steps to reproduce are missing.
-            Use "none" if the issue is complete, is a feature request, or is a build/CI/packaging issue.
-
-            Title: ${{ github.event.issue.title }}
-            Body: ${{ github.event.issue.body }}
-          system-prompt: You are a helpful assistant that triages GitHub issues. Be conservative with labels. Only request device logs for actual device/firmware bugs, not for build/release/CI issues.
-          model: openai/gpt-4o-mini
-
-      - name: Process analysis result
-        if: (steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == '') && steps.check-skip.outputs.should_skip != 'true' && steps.analysis.outputs.response != ''
-        uses: actions/github-script@v8
-        id: process
-        env:
-          AI_RESPONSE: ${{ steps.analysis.outputs.response }}
-        with:
-          script: |
-            let raw = (process.env.AI_RESPONSE || '').trim();
-
-            // Strip markdown code fences if present
-            raw = raw.replace(/^```(?:json)?\s*/i, '').replace(/\s*```$/i, '').trim();
-
-            let complete = true;
-            let comment = '';
-            let label = 'none';
-
-            try {
-              const parsed = JSON.parse(raw);
-              complete = !!parsed.complete;
-              comment = (parsed.comment ?? '').toString().trim();
-              label = (parsed.label ?? 'none').toString().trim().toLowerCase();
-            } catch {
-              // If JSON parse fails, log warning and don't comment (avoid posting raw JSON)
-              console.log('Failed to parse AI response as JSON:', raw);
-              complete = true;
-              comment = '';
-              label = 'none';
-            }
-
-            // Validate label
-            const allowedLabels = new Set(['needs-logs', 'needs-info', 'none']);
-            if (!allowedLabels.has(label)) label = 'none';
-
-            // Only comment if we have a valid parsed comment (not raw JSON)
-            const shouldComment = !complete && comment.length > 0 && !comment.startsWith('{');
-            core.setOutput('should_comment', shouldComment ? 'true' : 'false');
-            core.setOutput('comment_body', comment);
-            core.setOutput('label', label);
-
-      - name: Apply triage label
-        if: steps.process.outputs.label != '' && steps.process.outputs.label != 'none'
-        uses: actions/github-script@v8
-        env:
-          LABEL_NAME: ${{ steps.process.outputs.label }}
-        with:
-          script: |
-            const label = process.env.LABEL_NAME;
-            const labelMeta = {
-              'needs-logs': { color: 'cfd3d7', description: 'Device logs requested for triage' },
-              'needs-info': { color: 'f9d0c4', description: 'More information requested for triage' },
-            };
-            const meta = labelMeta[label];
-            if (!meta) return;
-
-            // Ensure label exists
-            try {
-              await github.rest.issues.getLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label });
-            } catch (e) {
-              if (e.status !== 404) throw e;
-              await github.rest.issues.createLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label, color: meta.color, description: meta.description });
-            }
-
-            // Apply label
-            await github.rest.issues.addLabels({ owner: context.repo.owner, repo: context.repo.repo, issue_number: context.payload.issue.number, labels: [label] });
-
-      - name: Comment on issue
-        if: steps.process.outputs.should_comment == 'true'
-        uses: actions/github-script@v8
-        env:
-          COMMENT_BODY: ${{ steps.process.outputs.comment_body }}
-        with:
-          script: |
-            await github.rest.issues.createComment({
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              issue_number: context.payload.issue.number,
-              body: process.env.COMMENT_BODY
-            });

.github/workflows/models_pr_triage.yml

@@ -1,139 +0,0 @@
-name: PR Triage (Models)
-
-on:
-  pull_request_target:
-    types: [opened]
-
-permissions:
-  pull-requests: write
-  issues: write
-  models: read
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.event.pull_request.number }}
-  cancel-in-progress: true
-
-jobs:
-  triage:
-    if: ${{ github.repository == 'meshtastic/firmware' && github.event.pull_request.user.type != 'Bot' }}
-    runs-on: ubuntu-latest
-    steps:
-      # ─────────────────────────────────────────────────────────────────────────
-      # Step 1: Check if PR already has automation/type labels (skip if so)
-      # ─────────────────────────────────────────────────────────────────────────
-      - name: Check existing labels
-        uses: actions/github-script@v8
-        id: check-labels
-        with:
-          script: |
-            const skipLabels = new Set(['automation']);
-            const typeLabels = new Set(['bugfix', 'hardware-support', 'enhancement', 'dependencies', 'submodules', 'github_actions', 'trunk', 'cleanup']);
-            const prLabels = context.payload.pull_request.labels.map(l => l.name);
-
-            const shouldSkipAll = prLabels.some(l => skipLabels.has(l));
-            const hasTypeLabel = prLabels.some(l => typeLabels.has(l));
-
-            core.setOutput('skip_all', shouldSkipAll ? 'true' : 'false');
-            core.setOutput('has_type_label', hasTypeLabel ? 'true' : 'false');
-
-      # ─────────────────────────────────────────────────────────────────────────
-      # Step 2: Quality check (spam/AI-slop detection)
-      # ─────────────────────────────────────────────────────────────────────────
-      - name: Detect spam or low-quality content
-        if: steps.check-labels.outputs.skip_all != 'true'
-        uses: actions/ai-inference@v2
-        id: quality
-        continue-on-error: true
-        with:
-          max-tokens: 20
-          prompt: |
-            Is this GitHub pull request spam, AI-generated slop, or low quality?
-
-            Title: ${{ github.event.pull_request.title }}
-            Body: ${{ github.event.pull_request.body }}
-
-            Respond with exactly one of: spam, ai-generated, needs-review, ok
-          system-prompt: You detect spam and low-quality contributions. Be conservative - only flag obvious spam or AI slop.
-          model: openai/gpt-4o-mini
-
-      - name: Apply quality label if needed
-        if: steps.check-labels.outputs.skip_all != 'true' && steps.quality.outputs.response != '' && steps.quality.outputs.response != 'ok'
-        uses: actions/github-script@v8
-        id: quality-label
-        env:
-          QUALITY_LABEL: ${{ steps.quality.outputs.response }}
-        with:
-          script: |
-            const label = (process.env.QUALITY_LABEL || '').trim().toLowerCase();
-            const labelMeta = {
-              'spam': { color: 'd73a4a', description: 'Possible spam' },
-              'ai-generated': { color: 'fbca04', description: 'Possible AI-generated low-quality content' },
-              'needs-review': { color: 'f9d0c4', description: 'Needs human review' },
-            };
-            const meta = labelMeta[label];
-            if (!meta) return;
-
-            // Ensure label exists
-            try {
-              await github.rest.issues.getLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label });
-            } catch (e) {
-              if (e.status !== 404) throw e;
-              await github.rest.issues.createLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label, color: meta.color, description: meta.description });
-            }
-
-            // Apply label
-            await github.rest.issues.addLabels({ owner: context.repo.owner, repo: context.repo.repo, issue_number: context.payload.pull_request.number, labels: [label] });
-
-            core.setOutput('is_spam', 'true');
-
-      # ─────────────────────────────────────────────────────────────────────────
-      # Step 3: Auto-label PR type (bugfix/hardware-support/enhancement)
-      # Only skip for spam/ai-generated; still classify needs-review PRs
-      # ─────────────────────────────────────────────────────────────────────────
-      - name: Classify PR for labeling
-        if: steps.check-labels.outputs.skip_all != 'true' && steps.check-labels.outputs.has_type_label != 'true' && steps.quality.outputs.response != 'spam' && steps.quality.outputs.response != 'ai-generated'
-        uses: actions/ai-inference@v2
-        id: classify
-        continue-on-error: true
-        with:
-          max-tokens: 30
-          prompt: |
-            Classify this pull request into exactly one category.
-
-            Return exactly one of: bugfix, hardware-support, enhancement
-
-            Use bugfix if it fixes a bug, crash, or incorrect behavior.
-            Use hardware-support if it adds or improves support for a specific hardware device/variant.
-            Use enhancement if it adds a new feature, improves performance, or refactors code.
-
-            Title: ${{ github.event.pull_request.title }}
-            Body: ${{ github.event.pull_request.body }}
-          system-prompt: You classify pull requests into categories. Be conservative and pick the most appropriate single label.
-          model: openai/gpt-4o-mini
-
-      - name: Apply type label
-        if: steps.check-labels.outputs.skip_all != 'true' && steps.check-labels.outputs.has_type_label != 'true' && steps.classify.outputs.response != ''
-        uses: actions/github-script@v8
-        env:
-          TYPE_LABEL: ${{ steps.classify.outputs.response }}
-        with:
-          script: |
-            const label = (process.env.TYPE_LABEL || '').trim().toLowerCase();
-            const labelMeta = {
-              'bugfix': { color: 'd73a4a', description: 'Bug fix' },
-              'hardware-support': { color: '0e8a16', description: 'Hardware support addition or improvement' },
-              'enhancement': { color: 'a2eeef', description: 'New feature or enhancement' },
-            };
-            const meta = labelMeta[label];
-            if (!meta) return;
-
-            // Ensure label exists
-            try {
-              await github.rest.issues.getLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label });
-            } catch (e) {
-              if (e.status !== 404) throw e;
-              await github.rest.issues.createLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label, color: meta.color, description: meta.description });
-            }
-
-            // Apply label
-            await github.rest.issues.addLabels({ owner: context.repo.owner, repo: context.repo.repo, issue_number: context.payload.pull_request.number, labels: [label] });

.github/workflows/package_obs.yml

@@ -18,7 +18,8 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
+  packages: write
 
 jobs:
   build-debian-src:
@@ -57,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v6
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -16,7 +16,8 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
+  packages: write
 
 jobs:
   pkg-pio-libdeps:
@@ -26,6 +27,8 @@ jobs:
         uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -51,19 +54,9 @@ jobs:
           PLATFORMIO_LIBDEPS_DIR: pio/libdeps
           PLATFORMIO_PACKAGES_DIR: pio/packages
           PLATFORMIO_CORE_DIR: pio/core
-          PLATFORMIO_SETTING_ENABLE_TELEMETRY: 0
-          PLATFORMIO_SETTING_CHECK_PLATFORMIO_INTERVAL: 3650
-          PLATFORMIO_SETTING_CHECK_PRUNE_SYSTEM_THRESHOLD: 10240
-
-      - name: Mangle platformio cache
-        # Add "1" to epoch-timestamps of all downloads in the cache.
-        # This is a hack to prevent internet access at build-time.
-        run: |
-          cp pio/core/.cache/downloads/usage.db pio/core/.cache/downloads/usage.db.bak
-          jq -c 'with_entries(.value |= (. | tostring + "1" | tonumber))' pio/core/.cache/downloads/usage.db.bak > pio/core/.cache/downloads/usage.db
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v5
         with:
           name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
           overwrite: true

.github/workflows/package_ppa.yml

@@ -16,7 +16,8 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
+  packages: write
 
 jobs:
   build-debian-src:
@@ -35,6 +36,8 @@ jobs:
         with:
           submodules: recursive
           path: meshtasticd
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Install deps
         shell: bash
@@ -43,7 +46,7 @@ jobs:
           sudo apt-get install -y dput
 
       - name: Import GPG key
-        uses: crazy-max/ghaction-import-gpg@v7
+        uses: crazy-max/ghaction-import-gpg@v6
         with:
           gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
         id: gpg
@@ -57,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v6
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true
@@ -67,6 +70,5 @@ jobs:
 
       - name: Publish with dput
         if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        timeout-minutes: 15 # dput is terrible, sometimes runs 'forever'
         run: |
           dput ${{ inputs.ppa_repo }} meshtasticd_${{ steps.version.outputs.deb }}~${{ inputs.series }}_source.changes

.github/workflows/pr_tests.yml

@@ -50,7 +50,7 @@ jobs:
 
       - name: Download test artifacts
         if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v6
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}
           merge-multiple: true

.github/workflows/release_channels.yml

@@ -23,8 +23,8 @@ jobs:
         series:
           - jammy # 22.04 LTS
           - noble # 24.04 LTS
+          - plucky # 25.04
           - questing # 25.10
-          - resolute # 26.04 LTS
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: |-
@@ -48,37 +48,6 @@ jobs:
         ${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
     secrets: inherit
 
-  publish-release-notes:
-    if: github.event.action == 'published'
-    runs-on: ubuntu-latest
-    steps:
-      - name: Get release version
-        id: version
-        run: |
-          # Extract version from tag (e.g., v2.7.15.567b8ea -> 2.7.15.567b8ea)
-          VERSION=${GITHUB_REF#refs/tags/v}
-          echo "version=$VERSION" >> $GITHUB_OUTPUT
-
-      - name: Get release notes
-        run: |
-          mkdir -p ./publish
-          gh release view ${{ github.event.release.tag_name }} --json body --jq '.body' > ./publish/release_notes.md
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Publish release notes to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: firmware-${{ steps.version.outputs.version }}
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: Release notes for ${{ steps.version.outputs.version }}
-          enable_jekyll: true
-
   # Create a PR to bump version when a release is Published
   bump-version:
     if: github.event.action == 'published'
@@ -133,7 +102,7 @@ jobs:
           PIP_DISABLE_PIP_VERSION_CHECK: 1
 
       - name: Create Bumps pull request
-        uses: peter-evans/create-pull-request@v8
+        uses: peter-evans/create-pull-request@v7
         with:
           base: ${{ github.event.repository.default_branch }}
           branch: create-pull-request/bump-version

.github/workflows/sec_sast_semgrep_cron.yml

@@ -33,7 +33,7 @@ jobs:
 
       # step 3
       - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v5
         with:
           name: report.sarif
           overwrite: true

.github/workflows/stale_bot.yml

@@ -17,7 +17,7 @@ jobs:
 
     steps:
       - name: Stale PR+Issues
-        uses: actions/stale@v10.2.0
+        uses: actions/stale@v10.1.1
         with:
           days-before-stale: 45
           stale-issue-message: This issue has not had any comment or update in the last month. If it is still relevant, please post update comments. If no comments are made, this issue will be closed automagically in 7 days.

.github/workflows/test_native.yml

@@ -16,6 +16,8 @@ jobs:
     steps:
       - uses: actions/checkout@v6
         with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
           submodules: recursive
 
       - name: Setup native build
@@ -57,7 +59,7 @@ jobs:
         id: version
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v5
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}
@@ -70,6 +72,8 @@ jobs:
     steps:
       - uses: actions/checkout@v6
         with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
           submodules: recursive
 
       - name: Setup native build
@@ -90,7 +94,7 @@ jobs:
 
       - name: Save test results
         if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v5
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}
           overwrite: true
@@ -104,7 +108,7 @@ jobs:
           sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v5
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}
@@ -124,26 +128,29 @@ jobs:
     if: always()
     steps:
       - uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Get release version string
         run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v6
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v3.0.0
+        uses: dorny/test-reporter@v2.3.0
         with:
           name: PlatformIO Tests
           path: testreport.xml
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v8
+        uses: actions/download-artifact@v6
         with:
           pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}
           path: code-coverage-report
@@ -156,7 +163,7 @@ jobs:
           genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report
 
       - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v5
         with:
           name: code-coverage-report-${{ steps.version.outputs.long }}
           path: code-coverage-report

.github/workflows/tests.yml

@@ -52,7 +52,7 @@ jobs:
           node-version: 24
 
       - name: Setup pnpm
-        uses: pnpm/action-setup@v5
+        uses: pnpm/action-setup@v4
         with:
           version: latest
 

.github/workflows/trunk_format_pr.yml

@@ -0,0 +1,51 @@
+name: Run Trunk Fmt on PR Comment
+
+on:
+  issue_comment:
+    types: [created]
+
+permissions: read-all
+
+jobs:
+  trunk-fmt:
+    if: github.event.issue.pull_request != null && contains(github.event.comment.body, 'trunk fmt')
+    runs-on: ubuntu-latest
+    permissions:
+      contents: write
+      pull-requests: write
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Install trunk
+        run: curl https://get.trunk.io -fsSL | bash
+
+      - name: Run Trunk Fmt
+        run: trunk fmt
+
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Commit and push changes
+        run: |
+          git config --global user.name "github-actions[bot]"
+          git config --global user.email "github-actions[bot]@users.noreply.github.com"
+          git add .
+          git commit -m "Add firmware version ${{ steps.version.outputs.long }}"
+          git push
+
+      - name: Comment on PR
+        uses: actions/github-script@v8
+        with:
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+          script: |
+            github.issues.createComment({
+              issue_number: context.issue.number,
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              body: '`trunk fmt` has been run on this PR.'
+            })

.github/workflows/update_protobufs.yml

@@ -6,7 +6,7 @@ permissions: read-all
 jobs:
   update-protobufs:
     runs-on: ubuntu-latest
-    permissions: # Needed for peter-evans/create-pull-request.
+    permissions:
       contents: write
       pull-requests: write
     steps:
@@ -16,7 +16,7 @@ jobs:
           submodules: true
 
       - name: Update submodule
-        if: ${{ github.ref == 'refs/heads/master' || github.ref == 'refs/heads/develop' }}
+        if: ${{ github.ref == 'refs/heads/master' }}
         run: |
           git submodule update --remote protobufs
 
@@ -31,7 +31,7 @@ jobs:
           ./bin/regen-protos.sh
 
       - name: Create pull request
-        uses: peter-evans/create-pull-request@v8
+        uses: peter-evans/create-pull-request@v7
         with:
           branch: create-pull-request/update-protobufs
           labels: submodules

.gitignore

@@ -33,7 +33,6 @@ __pycache__
 *~
 
 venv/
-.venv/
 release/
 .vscode/extensions.json
 /compile_commands.json
@@ -42,15 +41,3 @@ src/mesh/raspihttp/private_key.pem
 
 # Ignore logo (set at build time with platformio-custom.py)
 data/boot/logo.*
-
-# pioarduino platform
-managed_components/*
-arduino-lib-builder*
-dependencies.lock
-idf_component.yml
-CMakeLists.txt
-/sdkconfig.*
-.dummy/*
-
-# PYTHONPATH used by the Nix shell
-.python3

.trunk/trunk.yaml

@@ -4,31 +4,31 @@ cli:
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.6
+      ref: v1.7.4
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.513
+    - checkov@3.2.495
-    - renovate@43.104.6
+    - renovate@42.30.4
-    - prettier@3.8.1
+    - prettier@3.7.4
-    - trufflehog@3.94.2
+    - trufflehog@3.91.2
-    - yamllint@1.38.0
+    - yamllint@1.37.1
-    - bandit@1.9.4
+    - bandit@1.9.2
-    - trivy@0.69.3
+    - trivy@0.67.2
     - taplo@0.10.0
-    - ruff@0.15.9
+    - ruff@0.14.7
-    - isort@8.0.1
+    - isort@7.0.0
-    - markdownlint@0.48.0
+    - markdownlint@0.46.0
-    - oxipng@10.1.0
+    - oxipng@9.1.5
-    - svgo@4.0.1
+    - svgo@4.0.0
-    - actionlint@1.7.12
+    - actionlint@1.7.9
     - flake8@7.3.0
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@26.3.1
+    - black@25.11.0
     - git-diff-check
-    - gitleaks@8.30.1
+    - gitleaks@8.30.0
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

Dockerfile

@@ -14,7 +14,7 @@ RUN apt-get update && apt-get install --no-install-recommends -y \
         curl wget g++ zip git ca-certificates pkg-config \
         libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
         libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
-        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev libsdl2-dev \
+        libx11-dev libinput-dev libxkbcommon-x11-dev \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware
@@ -53,7 +53,7 @@ USER root
 RUN apt-get update && apt-get --no-install-recommends -y install \
         libc-bin libc6 libgpiod3 libyaml-cpp0.8 libi2c0 libuv1t64 libusb-1.0-0-dev \
         liborcania2.3 libulfius2.7t64 libssl3t64 \
-        libx11-6 libinput10 libxkbcommon-x11-0 libsdl2-2.0-0 \
+        libx11-6 libinput10 libxkbcommon-x11-0 \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \

Dockerfile.test

@@ -1,26 +0,0 @@
-# Lightweight container for running native PlatformIO tests on non-Linux hosts
-FROM python:3.14-slim-trixie
-
-ENV DEBIAN_FRONTEND=noninteractive
-ENV PIP_ROOT_USER_ACTION=ignore
-
-# hadolint ignore=DL3008
-RUN apt-get update && apt-get install --no-install-recommends -y \
-        g++ git ca-certificates pkg-config \
-        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
-        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
-        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev libsdl2-dev \
-    && apt-get clean && rm -rf /var/lib/apt/lists/* \
-    && pip install --no-cache-dir platformio==6.1.19 \
-        && useradd --create-home --shell /usr/sbin/nologin meshtastic
-
-WORKDIR /firmware
-RUN chown -R meshtastic:meshtastic /firmware
-
-HEALTHCHECK --interval=30s --timeout=5s --start-period=10s --retries=3 \
-    CMD platformio --version || exit 1
-
-USER meshtastic
-
-# Run tests by default; override with docker run args for specific filters
-CMD ["platformio", "test", "-e", "coverage", "-v"]

SECURITY.md

@@ -4,8 +4,8 @@
 
 | Firmware Version | Supported          |
 | ---------------- | ------------------ |
-| 2.7.x            | :white_check_mark: |
+| 2.6.x            | :white_check_mark: |
-| <= 2.6.x         | :x:                |
+| <= 2.5.x         | :x:                |
 
 ## Reporting a Vulnerability
 

alpine.Dockerfile

@@ -11,7 +11,7 @@ RUN apk --no-cache add \
         bash g++ libstdc++-dev linux-headers zip git ca-certificates libbsd-dev \
         libgpiod-dev yaml-cpp-dev bluez-dev \
         libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
-        libx11-dev libinput-dev libxkbcommon-dev sqlite-dev sdl2-dev \
+        libx11-dev libinput-dev libxkbcommon-dev \
     && rm -rf /var/cache/apk/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware
@@ -42,7 +42,7 @@ USER root
 
 RUN apk --no-cache add \
         shadow libstdc++ libbsd libgpiod yaml-cpp libusb \
-        i2c-tools libuv libx11 libinput libxkbcommon sdl2 \
+        i2c-tools libuv libx11 libinput libxkbcommon \
     && rm -rf /var/cache/apk/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \

bin/build-esp32.sh

@@ -22,7 +22,7 @@ export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 -t mtjson # -v
+pio run --environment $1 # -v
 
 cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
 
@@ -32,10 +32,20 @@ cp $BUILDDIR/$basename.factory.bin $OUTDIR/$basename.factory.bin
 echo "Copying ESP32 update bin file"
 cp $BUILDDIR/$basename.bin $OUTDIR/$basename.bin
 
-echo "Copying Filesystem for ESP32 targets"
+echo "Building Filesystem for ESP32 targets"
+# If you want to build the webui, uncomment the following lines
+# pio run --environment $1 -t buildfs
+# cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$1-$VERSION.bin
+# # Remove webserver files from the filesystem and rebuild
+# ls -l data/static # Diagnostic list of files
+# rm -rf data/static
+pio run --environment $1 -t buildfs --disable-auto-clean
 cp $BUILDDIR/littlefs-$1-$VERSION.bin $OUTDIR/littlefs-$1-$VERSION.bin
 cp bin/device-install.* $OUTDIR/
 cp bin/device-update.* $OUTDIR/
 
-echo "Copying manifest"
+# Generate the manifest file
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true
+echo "Generating Meshtastic manifest"
+TIMEFORMAT="Generated manifest in %E seconds"
+time pio run --environment $1 -t mtjson --silent --disable-auto-clean
+cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/build-nrf52.sh

@@ -21,14 +21,13 @@ rm -f $BUILDDIR/firmware*
 export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
-ota_basename=${basename}-ota
 
-pio run --environment $1 -t mtjson # -v
+pio run --environment $1 # -v
 
 cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
 
 echo "Copying NRF52 dfu (OTA) file"
-cp $BUILDDIR/$basename.zip $OUTDIR/$ota_basename.zip
+cp $BUILDDIR/$basename.zip $OUTDIR/$basename.zip
 
 echo "Copying NRF52 UF2 file"
 cp $BUILDDIR/$basename.uf2 $OUTDIR/$basename.uf2
@@ -48,5 +47,8 @@ if (echo $1 | grep -q "rak4631"); then
 	cp $SRCHEX $OUTDIR/
 fi
 
-echo "Copying manifest"
+# Generate the manifest file
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true
+echo "Generating Meshtastic manifest"
+TIMEFORMAT="Generated manifest in %E seconds"
+time pio run --environment $1 -t mtjson --silent --disable-auto-clean
+cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/build-rp2xx0.sh

@@ -22,12 +22,15 @@ export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 -t mtjson # -v
+pio run --environment $1 # -v
 
 cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
 
 echo "Copying uf2 file"
 cp $BUILDDIR/$basename.uf2 $OUTDIR/$basename.uf2
 
-echo "Copying manifest"
+# Generate the manifest file
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true
+echo "Generating Meshtastic manifest"
+TIMEFORMAT="Generated manifest in %E seconds"
+time pio run --environment $1 -t mtjson --silent --disable-auto-clean
+cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/build-stm32wl.sh

@@ -22,12 +22,15 @@ export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 -t mtjson # -v
+pio run --environment $1 # -v
 
 cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
 
 echo "Copying STM32 bin file"
 cp $BUILDDIR/$basename.bin $OUTDIR/$basename.bin
 
-echo "Copying manifest"
+# Generate the manifest file
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true
+echo "Generating Meshtastic manifest"
+TIMEFORMAT="Generated manifest in %E seconds"
+time pio run --environment $1 -t mtjson --silent --disable-auto-clean
+cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/check-all.sh

@@ -23,4 +23,4 @@ for BOARD in $BOARDS; do
 	CHECK="${CHECK} -e ${BOARD}"
 done
 
-pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=low --fail-on-defect=medium --fail-on-defect=high
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high

bin/config-dist.yaml

@@ -105,8 +105,6 @@ Lora:
 
 GPS:
 #  SerialPath: /dev/ttyS0
-#  ExtraPins:
-#    - 22
 
 ### Specify I2C device, or leave blank for none
 
@@ -186,9 +184,6 @@ Input:
 Logging:
   LogLevel: info # debug, info, warn, error
 #  TraceFile: /var/log/meshtasticd.json
-#  JSONFile: /packets.json # File location for JSON output of decoded packets
-#  JSONFileRotate: 60 # Rotate JSON file every N minutes, or 0 for no rotation
-#  JSONFilter: position # filter for packets to save to JSON file
 #  AsciiLogs: true     # default if not specified is !isatty() on stdout
 
 Webserver:
@@ -215,4 +210,3 @@ General:
   AvailableDirectory: /etc/meshtasticd/available.d/
 #  MACAddress: AA:BB:CC:DD:EE:FF
 #  MACAddressSource: eth0
-#  APIPort: 4403

bin/config.d/OpenWRT/BananaPi-BPI-R4-sx1262.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: BananaPi-BPI-R4-sx1262
-  support: community
-  compatible:
-    - bananapi_bpi-r4 # OpenWrt target
-
 Lora:
   Module: sx1262  # BananaPi-BPI-R4 SPI via 26p GPIO Header
 ##  CS: 28

bin/config.d/OpenWRT/OpenWRT-One-mikroBUS-LR-IOT-CLICK.yaml

@@ -1,10 +1,4 @@
 ##  https://www.mikroe.com/lr-iot-click
-Meta:
-  name: OpenWRT One mikroBUS LR-IOT-CLICK
-  support: community
-  compatible:
-    - openwrt_one # OpenWrt target
-
 Lora:
   Module: lr1110  # OpenWRT ONE mikroBUS with LR-IOT-CLICK
 #  CS: 25

bin/config.d/OpenWRT/OpenWRT_One_mikroBUS_sx1262.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: OpenWRT One mikroBUS sx1262
-  support: community
-  compatible:
-    - openwrt_one # OpenWrt target
-
 Lora:
   Module: sx1262
   IRQ: 10

bin/config.d/README.md

@@ -1,28 +0,0 @@
-# meshtasticd configuration files
-
-This directory contains YAML configuration files for meshtasticd. Each file describes a specific hardware configuration, including the LoRa module and pin assignments. These configurations are used by meshtasticd to correctly interface with the hardware.
-
-## Metadata structure
-
-Each configuration file includes a `Meta` section that provides information about the configuration.
-This configuration is consumed by configuration-selection tools.
-
-```yaml
-Meta:
-  name: MeshAdv-Pi E22-900M30S # A unique identifier for this configuration.
-  support: community # community, official, or deprecated; determined by Meshtastic Leads.
-  compatible: # A list of compatible products or platforms.
-    - raspberry-pi
-```
-`name`: A unique identifier for the configuration, typically reflecting the hardware it supports.
-
-`support`: Indicates the level of support for this configuration. It can be one of the following:
-
-- `community`: Supported by the Meshtastic community. Meshtastic Members may not possess, or have not tested this configuration.
-- `official`: Fully supported by Meshtastic. Meshtastic Members have tested and verified this configuration.
-- `deprecated`: No longer recommended for deployment by Meshtastic.
-
-`compatible`: A list of compatible products or platforms that can use this configuration.
-This will vary depending on the intended use case / platform.
-Multiple compatible entries can be included. E.g. Armbian `BOARD` value or OpenWrt `TARGET` value.
-These tags can be consumed by different configuration-selection tools, filtering based upon their platform/etc.

bin/config.d/display-waveshare-1-44.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Waveshare 1.44inch LCD HAT
-  support: community
-  compatible:
-    - raspberry-pi
-
 ### Waveshare 1.44inch LCD HAT
 Display:
   Panel: ST7735S

bin/config.d/display-waveshare-2.8.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Waveshare 2.8inch LCD HAT
-  support: community
-  compatible:
-    - raspberry-pi
-
 Display:
 
 ### Waveshare 2.8inch RPi LCD

bin/config.d/femtofox/femtofox_E80-900M2213S.yaml

@@ -1,30 +0,0 @@
----
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-rfswitch_table:
-  pins: [DIO5, DIO6, DIO7]
-  MODE_STBY: [LOW, LOW, LOW]
-  MODE_RX: [LOW, HIGH, LOW]
-  MODE_TX: [HIGH, HIGH, LOW]
-  MODE_TX_HP: [HIGH, LOW, LOW]
-  MODE_TX_HF: [LOW, LOW, LOW]
-  MODE_GNSS: [LOW, LOW, HIGH]
-  MODE_WIFI: [LOW, LOW, LOW]
-
-General:
-  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_LR1121 generic.yaml

@@ -1,46 +0,0 @@
----
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-rfswitch_table:
-  pins:
-    - DIO5
-    - DIO6
-  MODE_STBY:
-    - LOW
-    - LOW
-  MODE_RX:
-    - HIGH
-    - LOW
-  MODE_TX:
-    - HIGH
-    - HIGH
-  MODE_TX_HP:
-    - LOW
-    - HIGH
-  MODE_TX_HF:
-    - LOW
-    - LOW
-  MODE_GNSS:
-    - LOW
-    - LOW
-  MODE_WIFI:
-    - LOW
-    - LOW
-
-General:
-  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_LR1121_TCXO.yaml

@@ -1,22 +1,20 @@
----
+---
-Meta:
+Lora:
-  name: Femtofox Ebyte E80-900M22S with TCXO
+## Ebyte E80-900M22S
-  support: community
+## This is a bit experimental
-  compatible:
+## 
-    - luckfox-pico-mini # Armbian
+##
-
+  Module: lr1121
-Lora:
+  gpiochip: 1 # subtract 32 from the gpio numbers
-## Ebyte E80-900M22S
+  DIO3_TCXO_VOLTAGE: 1.8
-## This is a bit experimental
+  CS: 16 #pin6 / GPIO48 1C0
-## 
+  IRQ: 23  #pin17 / GPIO55 1C7
-##
+  Busy: 22 #pin16 / GPIO54 1C6
-  Module: lr1121
+  Reset: 25 #pin13 / GPIO57 1D1
-  gpiochip: 1 # subtract 32 from the gpio numbers
+
-  DIO3_TCXO_VOLTAGE: 1.8
+
-  CS: 16 #pin6 / GPIO48 1C0
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  IRQ: 23  #pin17 / GPIO55 1C7
+  spiSpeed: 2000000
-  Busy: 22 #pin16 / GPIO54 1C6
+  
-  Reset: 25 #pin13 / GPIO57 1D1
+General:
-
+  MACAddressSource: eth0
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000

bin/config.d/femtofox/femtofox_SX1262_TCXO.yaml

@@ -1,24 +1,21 @@
----
+---
-Meta:
+Lora:
-  name: Femtofox SX1262 TCXO
+## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
-  support: community
+## HT-RA62 (Has internal switching, but whatever)
-  compatible:
+## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
-    - luckfox-pico-mini # Armbian
+## Will work with any module with or without RF switching, and with TCXO
-
+  Module: sx1262
-Lora:
+  gpiochip: 1 # subtract 32 from the gpio numbers
-## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
+  DIO2_AS_RF_SWITCH: true
-## HT-RA62 (Has internal switching, but whatever)
+  DIO3_TCXO_VOLTAGE: true
-## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
+  CS: 16 #pin6 / GPIO48 1C0
-## Will work with any module with or without RF switching, and with TCXO
+  IRQ: 23  #pin17 / GPIO55 1C7
-  Module: sx1262
+  Busy: 22 #pin16 / GPIO54 1C6
-  gpiochip: 1 # subtract 32 from the gpio numbers
+  Reset: 25 #pin13 / GPIO57 1D1
-  DIO2_AS_RF_SWITCH: true
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-  DIO3_TCXO_VOLTAGE: true
+#  TXen: bridge to DIO2 on E22 module
-  CS: 16 #pin6 / GPIO48 1C0
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  IRQ: 23  #pin17 / GPIO55 1C7
+  spiSpeed: 2000000
-  Busy: 22 #pin16 / GPIO54 1C6
+  
-  Reset: 25 #pin13 / GPIO57 1D1
+General:
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+  MACAddressSource: eth0
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000

bin/config.d/femtofox/femtofox_SX1262_XTAL.yaml

@@ -1,24 +1,21 @@
----
+---
-Meta:
+Lora:
-  name: Femtofox SX1262 XTAL
+## Ebyte E22-900MM22S with no external RF switching setup
-  support: community
+## Waveshare SX126X XXXM, AI Thinker RA-01SH
-  compatible:
+## Will work with any module with or without RF switching and no TCXO
-    - luckfox-pico-mini # Armbian
+
-
+  Module: sx1262  
-Lora:
+  gpiochip: 1 # subtract 32 from the gpio numbers
-## Ebyte E22-900MM22S with no external RF switching setup
+  DIO2_AS_RF_SWITCH: true
-## Waveshare SX126X XXXM, AI Thinker RA-01SH
+  DIO3_TCXO_VOLTAGE: false
-## Will work with any module with or without RF switching and no TCXO
+  CS: 16 #pin6 / GPIO48 1C0
-
+  IRQ: 23  #pin17 / GPIO55 1C7
-  Module: sx1262  
+  Busy: 22 #pin16 / GPIO54 1C6
-  gpiochip: 1 # subtract 32 from the gpio numbers
+  Reset: 25 #pin13 / GPIO57 1D1 
-  DIO2_AS_RF_SWITCH: true
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-  DIO3_TCXO_VOLTAGE: false
+#  TXen: bridge to DIO2 on E22 module
-  CS: 16 #pin6 / GPIO48 1C0
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  IRQ: 23  #pin17 / GPIO55 1C7
+  spiSpeed: 2000000
-  Busy: 22 #pin16 / GPIO54 1C6
+
-  Reset: 25 #pin13 / GPIO57 1D1 
+General:
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+  MACAddressSource: eth0
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000

bin/config.d/femtofox/femtofox_WIO-LR1121.yaml

@@ -1,30 +0,0 @@
----
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-rfswitch_table:
-  pins: [DIO5, DIO6, DIO7]
-  MODE_STBY: [LOW, LOW, LOW]
-  MODE_RX: [LOW, LOW, LOW]
-  MODE_TX: [LOW, HIGH, LOW]
-  MODE_TX_HP: [HIGH, LOW, LOW]
-  # MODE_TX_HF: []
-  # MODE_GNSS: []
-  MODE_WIFI: [LOW, LOW, LOW]
-
-General:
-  MACAddressSource: eth0

bin/config.d/lora-Adafruit-RFM9x.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Adafruit RFM9x
-  support: deprecated
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: RF95  # Adafruit RFM9x
   Reset: 25

bin/config.d/lora-MeshAdv-900M30S.yaml

@@ -1,11 +1,5 @@
 # MeshAdv-Pi E22-900M30S
 # https://github.com/chrismyers2000/MeshAdv-Pi-Hat
-Meta:
-  name: MeshAdv-Pi E22-900M30S
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: sx1262
   CS: 21

bin/config.d/lora-MeshAdv-Mini-900M22S.yaml

@@ -1,11 +1,5 @@
 # MeshAdv Mini E22-900M22S
 # https://github.com/chrismyers2000/MeshAdv-Mini
-Meta:
-  name: MeshAdv Mini E22-900M22S
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: sx1262  # Ebyte E22-900M22S 
   CS: 8

bin/config.d/lora-RAK6421-13300-slot1.yaml

@@ -1,20 +1,11 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1
-  support: official
-  compatible:
-    - raspberry-pi
-
 Lora:
 
-  ### RAK13300 in Slot 1
+  ### RAK13300in Slot 1
   Module: sx1262
   IRQ: 22 #IO6
   Reset: 16 # IO4
   Busy: 24 # IO5
   # Ant_sw: 13 # IO3 
-  Enable_Pins:
-    - 12
-    - 13
   DIO3_TCXO_VOLTAGE: true
   DIO2_AS_RF_SWITCH: true
   spidev: spidev0.0

bin/config.d/lora-RAK6421-13300-slot2.yaml

@@ -1,17 +1,8 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 2
-  support: official
-  compatible:
-    - raspberry-pi
-
 Lora:
-  ### RAK13300 in Slot 2 pins
+  ### RAK13300in Slot 2 pins
   IRQ: 18 #IO6
   Reset: 24 # IO4
   Busy: 19 # IO5
   # Ant_sw: 23 # IO3 
-  Enable_Pins:
-    - 26
-    - 23
   spidev: spidev0.1
   # CS: 7

bin/config.d/lora-RAK6421-13302-slot1.yaml

@@ -1,22 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13302 Slot 1
-  support: official
-  compatible:
-    - raspberry-pi
-
-Lora:
-
-  ### RAK13302 in Slot 1
-  Module: sx1262
-  IRQ: 22 #IO6
-  Reset: 16 # IO4
-  Busy: 24 # IO5
-  # Ant_sw: 13 # IO3 
-  Enable_Pins:
-    - 12
-    - 13
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: 8
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-RAK6421-13302-slot2.yaml

@@ -1,18 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13302 Slot 2
-  support: official
-  compatible:
-    - raspberry-pi
-
-Lora:
-  ### RAK13302 in Slot 2 pins
-  IRQ: 18 #IO6
-  Reset: 24 # IO4
-  Busy: 19 # IO5
-  # Ant_sw: 23 # IO3 
-  Enable_Pins:
-    - 26
-    - 23
-  spidev: spidev0.1
-  # CS: 7
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-hat-rak-6421-pi-hat.yaml

@@ -1,21 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1 (Autoconf default)
-  support: official
-  compatible:
-    - raspberry-pi
-
-Lora:
-
-  ### RAK13300 in Slot 1
-  Module: sx1262
-  IRQ: 22 #IO6
-  Reset: 16 # IO4
-  Busy: 24 # IO5
-  Enable_Pins:
-    - 12
-    - 13
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # GPIO_DETECT_PA: 13
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-lyra-picocalc-wio-sx1262.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Luckfox Lyra PicoCalc Wio LoRa SX1262
-  support: official
-  compatible:
-    - luckfox-lyra-plus # Armbian
-
 Lora:
   Module: sx1262
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-lyra-ultra_1w.yaml

@@ -1,23 +0,0 @@
-# For use with Armbian luckfox-lyra-ultra-w
-# Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
-# https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
-# 1 Watt Lyra Ultra hat
-Meta:
-  name: wehooper4 Luckfox Ultra 1W
-  support: community
-  compatible:
-    - luckfox-pico-ultra # Armbian
-    - luckfox-lyra-ultra # Armbian
-
-Lora:
-  Module: sx1262
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  CS: 10
-  IRQ: 5
-  Busy: 11
-  Reset: 9
-  RXen: 14
-
-  spidev: spidev0.0 #pins are (CS=10, CLK=8, MOSI=6, MISO=7)
-  spiSpeed: 2000000

bin/config.d/lora-lyra-ultra_2w.yaml

@@ -1,24 +0,0 @@
-# For use with Armbian luckfox-lyra-ultra-w
-# Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
-# https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
-# 2 Watt Lyra Ultra hat
-Meta:
-  name: wehooper4 Luckfox Ultra 2W
-  support: community
-  compatible:
-    - luckfox-pico-ultra # Armbian
-    - luckfox-lyra-ultra # Armbian
-
-Lora:
-  Module: sx1262
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  SX126X_MAX_POWER: 8
-  CS: 10
-  IRQ: 5
-  Busy: 11
-  Reset: 9
-  RXen: 14
-
-  spidev: spidev0.0 #pins are (CS=10, CLK=8, MOSI=6, MISO=7)
-  spiSpeed: 2000000

bin/config.d/lora-lyra-ws-raspberry-pi-pico-hat.yaml

@@ -1,31 +0,0 @@
-# For use with Armbian luckfox-lyra // luckfox-lyra-plus
-# Enable overlay 'luckfox-lyra-plus-spi0-cs0_rmio13-spidev' with armbian-config
-# Waveshare LoRa HAT for Raspberry Pi Pico
-# https://www.waveshare.com/wiki/Pico-LoRa-SX1262
-Meta:
-  name: Waveshare LoRa HAT for Raspberry Pi Pico
-  support: community
-  compatible:
-    - luckfox-lyra-plus # Armbian
-
-Lora:
-  Module: sx1262
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  spidev: spidev0.0
-  CS: # GPIO0_B5
-    pin: 13
-    gpiochip: 0
-    line: 13
-  IRQ: # GPIO1_C2
-    pin: 50
-    gpiochip: 1
-    line: 18
-  Busy: # GPIO0_B4
-    pin: 12
-    gpiochip: 0
-    line: 12
-  Reset: # GPIO0_A2
-    pin: 2
-    gpiochip: 0
-    line: 2

bin/config.d/lora-lyra-zero-MeshAdv-900M30S.yaml

@@ -1,39 +0,0 @@
-# MeshAdv-Pi E22-900M30S
-# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
-Meta:
-  name: MeshAdv-Pi E22-900M30S
-  support: community
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262
-  CS: # GPIO0_C2 (physical 40)
-    pin: 18
-    gpiochip: 0
-    line: 18
-  IRQ: # GPIO1_D1 (physical 36)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  Busy: # GPIO0_C1 (physical 38)
-    pin: 17
-    gpiochip: 0
-    line: 17
-  Reset: # GPIO0_B6 (physical 12)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  TXen: # GPIO1_C2 (physical 33)
-    pin: 50
-    gpiochip: 1
-    line: 18
-  RXen: # GPIO1_D2 (physical 32)
-    pin: 58
-    gpiochip: 1
-    line: 26
-  DIO3_TCXO_VOLTAGE: true
-  # Only for E22-900M33S:
-  # Limit the output power to 8 dBm
-  # SX126X_MAX_POWER: 8
-  spidev: spidev0.0

bin/config.d/lora-lyra-zero-MeshAdv-Mini-900M22S.yaml

@@ -1,33 +0,0 @@
-# MeshAdv Mini E22-900M22S
-# https://github.com/chrismyers2000/MeshAdv-Mini
-Meta:
-  name: MeshAdv Mini E22-900M22S
-  support: community
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262 # Ebyte E22-900M22S
-  CS: # GPIO0_B2_d (phys 24, RPi CE0)
-    pin: 10
-    gpiochip: 0
-    line: 10
-  IRQ: # GPIO1_D1_d (phys 36, RPi GPIO16)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  Busy: # GPIO0_C1_d (phys 38, RPi GPIO20)
-    pin: 17
-    gpiochip: 0
-    line: 17
-  Reset: # GPIO0_B4_d (phys 18, RPi GPIO24)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  RXen: # GPIO1_D2_d (phys 32, RPi GPIO12)
-    pin: 58
-    gpiochip: 1
-    line: 26
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  spidev: spidev0.0

bin/config.d/lora-lyra-zero-RAK6421-13300-slot1.yaml

@@ -1,38 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1
-  support: community # Promote when tested
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_A5 (IO6)
-    pin: 5
-    gpiochip: 0
-    line: 5
-  Reset: # GPIO1_D1 (IO4)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  Busy: # GPIO0_B4 (IO5)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  # Ant_sw: # GPIO1_C2 (IO3)
-  #   pin: 50
-  #   gpiochip: 1
-  #   line: 18
-  Enable_Pins:
-    - pin: 58 # GPIO1_D2
-      gpiochip: 1
-      line: 26
-    - pin: 50 # GPIO1_C2
-      gpiochip: 1
-      line: 18
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: # GPIO0_B2
-  #   pin: 10
-  #   gpiochip: 0
-  #   line: 10

bin/config.d/lora-lyra-zero-RAK6421-13300-slot2.yaml

@@ -1,36 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 2
-  support: community # Promote when tested
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_B6 (IO6)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  Reset: # GPIO0_B4 (IO4)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  Busy: # GPIO1_C0 (IO5)
-    pin: 48
-    gpiochip: 1
-    line: 16
-  # Ant_sw: # GPIO0_B5 (IO3)
-  #   pin: 13
-  #   gpiochip: 0
-  #   line: 13
-  Enable_Pins:
-    - pin: 51 # GPIO1_C3
-      gpiochip: 1
-      line: 19
-    - pin: 13 # GPIO0_B5
-      gpiochip: 0
-      line: 13
-  spidev: spidev0.1
-  # CS: # GPIO0_B1
-  #   pin: 9
-  #   gpiochip: 0
-  #   line: 9

bin/config.d/lora-lyra-zero-RAK6421-13302-slot1.yaml

@@ -1,39 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1
-  support: community # Promote when tested
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_A5 (IO6)
-    pin: 5
-    gpiochip: 0
-    line: 5
-  Reset: # GPIO1_D1 (IO4)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  Busy: # GPIO0_B4 (IO5)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  # Ant_sw: # GPIO1_C2 (IO3)
-  #   pin: 50
-  #   gpiochip: 1
-  #   line: 18
-  Enable_Pins:
-    - pin: 58 # GPIO1_D2
-      gpiochip: 1
-      line: 26
-    - pin: 50 # GPIO1_C2
-      gpiochip: 1
-      line: 18
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: # GPIO0_B2
-  #   pin: 10
-  #   gpiochip: 0
-  #   line: 10
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-lyra-zero-RAK6421-13302-slot2.yaml

@@ -1,37 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 2
-  support: community # Promote when tested
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_B6 (IO6)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  Reset: # GPIO0_B4 (IO4)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  Busy: # GPIO1_C0 (IO5)
-    pin: 48
-    gpiochip: 1
-    line: 16
-  # Ant_sw: # GPIO0_B5 (IO3)
-  #   pin: 13
-  #   gpiochip: 0
-  #   line: 13
-  Enable_Pins:
-    - pin: 51 # GPIO1_C3
-      gpiochip: 1
-      line: 19
-    - pin: 13 # GPIO0_B5
-      gpiochip: 0
-      line: 13
-  spidev: spidev0.1
-  # CS: # GPIO0_B1
-  #   pin: 9
-  #   gpiochip: 0
-  #   line: 9
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-lyra-zero-waveshare-sxxx.yaml

@@ -1,30 +0,0 @@
-Meta:
-  name: Waveshare SX1262
-  support: deprecated
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262  # Waveshare SX126X XXXM
-  DIO2_AS_RF_SWITCH: true
-  CS: # GPIO0_C2 (physical 40)
-    pin: 18
-    gpiochip: 0
-    line: 18
-  IRQ: # GPIO1_D1 (physical 36)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  Busy: # GPIO0_C1 (physical 38)
-    pin: 17
-    gpiochip: 0
-    line: 17
-  Reset: # GPIO0_B6 (physical 12)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  SX126X_ANT_SW: # GPIO1_B3 (physical 31)
-    pin: 43
-    gpiochip: 1
-    line: 11
-  spidev: spidev0.0

bin/config.d/lora-meshstick-1262.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Lora Meshstick SX1262
-  support: official
-  compatible:
-    - usb
-
 Lora:
   Module: sx1262
   CS: 0

bin/config.d/lora-piggystick-lr1121.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Lora Meshstick SX1262
-  support: community
-  compatible:
-    - usb
-
 Lora:
   Module: lr1121
   CS: 0

bin/config.d/lora-pinedio-usb-sx1262.yaml

@@ -1,11 +1,5 @@
-Meta:
-  name: Pinedio USB SX1262
-  support: deprecated
-  compatible:
-    - usb
-
 Lora:
   Module: sx1262
   CS: 0 
   IRQ: 10
-  spidev: ch341
+  spidev: ch341

bin/config.d/lora-raxda-rock2f-starter-edition-hat.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: raxda-rock2f-starter-edition-hat
-  support: community
-  compatible:
-    - rock-2f # Armbian
-
 Lora:
 
 ### Raxda Rock 2F running Armbian Linux 6.1.99-vendor-rk35xx

bin/config.d/lora-starter-edition-sx1262-i2c.yaml

@@ -1,11 +1,5 @@
 # https://www.waveshare.com/core1262-868m.htm
 # https://github.com/markbirss/lora-starter-edition-sx1262-i2c
-Meta:
-  name: lora-starter-edition-sx1262-i2c
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: sx1262  # Starter Edition SX1262 I2C Raspberry Pi HAT
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-usb-meshstick-1262.yaml

@@ -1,20 +0,0 @@
-Meta:
-  name: meshstick-1262
-  support: official
-  compatible:
-    - usb
-
-Lora:
-  Module: sx1262
-  CS: 0
-  IRQ: 6
-  Reset: 2
-  Busy: 4
-  RXen: 1
-  DIO2_AS_RF_SWITCH: true
-  spidev: ch341
-  DIO3_TCXO_VOLTAGE: true
-#  USB_Serialnum: 12345678
-  USB_PID: 0x5512
-  USB_VID: 0x1A86
-  SX126X_MAX_POWER: 22

bin/config.d/lora-usb-meshtoad-e22.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: meshtoad-e22
-  support: official
-  compatible:
-    - usb
-
 Lora:
   Module: sx1262
   CS: 0

bin/config.d/lora-usb-umesh-1262-30dbm.yaml

@@ -1,28 +0,0 @@
-Meta:
-  name: umesh-1262-30dbm
-  support: community
-  compatible:
-    - clockwork-uconsole
-
-Lora:
-  Module: sx1262
-  CS: 0
-  IRQ: 6
-  Reset: 1
-  Busy: 4
-  RXen: 2
-  DIO2_AS_RF_SWITCH: true
-  spidev: ch341
-  USB_PID: 0x5512
-  USB_VID: 0x1A86
-  DIO3_TCXO_VOLTAGE: true
-#  USB_Serialnum: 12345678
-  SX126X_MAX_POWER: 22
-# Reduce output power to improve EMI
-  TX_GAIN_LORA: [12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7]
-# Note: This module integrates an additional PA to achieve higher output power.
-# The 'power' parameter here does not represent the actual RF output.
-# TX_GAIN_LORA defines the gain offset applied at each SX1262 input power step (1–22 dBm).
-# Each array element corresponds to the additional gain when that input level is set,
-# The effective RF output is: Pout ≈ Pset + TX_GAIN_LORA[index].
-# Please refer to https://github.com/linser233/uMesh/blob/main/RF_Power.md for detailed information.

bin/config.d/lora-usb-umesh-1268-30dbm.yaml

@@ -1,28 +0,0 @@
-Meta:
-  name: umesh-1268-30dbm
-  support: community
-  compatible:
-    - clockwork-uconsole
-
-Lora:
-  Module: sx1268
-  CS: 0
-  IRQ: 6
-  Reset: 1
-  Busy: 4
-  RXen: 2
-  DIO2_AS_RF_SWITCH: true
-  spidev: ch341
-  USB_PID: 0x5512
-  USB_VID: 0x1A86
-  DIO3_TCXO_VOLTAGE: true
-#  USB_Serialnum: 12345678
-  SX126X_MAX_POWER: 22
-# Reduce output power to improve EMI
-  TX_GAIN_LORA: [12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7]
-# Note: This module integrates an additional PA to achieve higher output power.
-# The 'power' parameter here does not represent the actual RF output.
-# TX_GAIN_LORA defines the gain offset applied at each SX1262 input power step (1–22 dBm).
-# Each array element corresponds to the additional gain when that input level is set,
-# The effective RF output is: Pout ≈ Pset + TX_GAIN_LORA[index].
-# Please refer to https://github.com/linser233/uMesh/blob/main/RF_Power.md for detailed information.

bin/config.d/lora-waveshare-sxxx.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Waveshare SX1262
-  support: deprecated
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: sx1262  # Waveshare SX126X XXXM
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-ws-raspberry-pi-pico-to-rpi-adapter.yaml

@@ -1,12 +1,5 @@
 # https://www.waveshare.com/pico-lora-sx1262-868m.htm
 # https://github.com/markbirss/lora-ws-raspberry-pi-pico-to-rpi-adapter
-
-Meta:
-  name: ws-raspberry-pico-to-rpi-adapter
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: sx1262  # Waveshare Raspberry Pi Pico to Raspberry Pi HAT Adapter
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-ws-raspberry-pico-to-orangepi-03.yaml

@@ -15,12 +15,6 @@
 #   5     CS          24
 #   26    DIO1/IRQ    26
 
-Meta:
-  name: ws-raspberry-pico-to-orangepi-03
-  support: community
-  compatible:
-    - orange-pi-zero-3 # Armbian
-
 Lora:
   Module: sx1262  # Waveshare Raspberry Pico Lora module
   DIO2_AS_RF_SWITCH: true

bin/device-install.bat

@@ -156,8 +156,16 @@ IF %BPS_RESET% EQU 1 (
 SET "PROGNAME=!FILENAME:.factory.bin=!"
 CALL :LOG_MESSAGE DEBUG "Computed PROGNAME: !PROGNAME!"
 
-@REM Determine OTA filename based on MCU type (unified OTA format)
+IF "__!MCU!__" == "__esp32s3__" (
-SET "OTA_FILENAME=mt-!MCU!-ota.bin"
+    @REM We are working with ESP32-S3
+    SET "OTA_FILENAME=bleota-s3.bin"
+) ELSE IF "__!MCU!__" == "__esp32c3__" (
+    @REM We are working with ESP32-C3
+    SET "OTA_FILENAME=bleota-c3.bin"
+) ELSE (
+    @REM Everything else
+    SET "OTA_FILENAME=bleota.bin"
+)
 CALL :LOG_MESSAGE DEBUG "Set OTA_FILENAME to: !OTA_FILENAME!"
 
 @REM Set SPIFFS filename with "littlefs-" prefix.

bin/device-install.sh

@@ -32,19 +32,6 @@ if ! command -v jq >/dev/null 2>&1; then
     exit 1
 fi
 
-# esptool v5 supports commands with dashes and deprecates commands with
-# underscores. Prior versions only support commands with underscores
-if ${ESPTOOL_CMD} | grep --quiet write-flash
-then
-    ESPTOOL_WRITE_FLASH=write-flash
-    ESPTOOL_ERASE_FLASH=erase-flash
-    ESPTOOL_READ_FLASH_STATUS=read-flash-status
-else
-    ESPTOOL_WRITE_FLASH=write_flash
-    ESPTOOL_ERASE_FLASH=erase_flash
-    ESPTOOL_READ_FLASH_STATUS=read_flash_status
-fi
-
 set -e
 
 # Usage info
@@ -96,8 +83,8 @@ while [ $# -gt 0 ]; do
 done
 
 if [[ $BPS_RESET == true ]]; then
-    $ESPTOOL_CMD --baud $RESET_BAUD --after no_reset ${ESPTOOL_READ_FLASH_STATUS}
+	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
-    exit 0
+	exit 0
 fi
 
 [ -z "$FILENAME" ] && [ -n "$1" ] && {
@@ -131,8 +118,14 @@ if [[ -f "$FILENAME" && "$FILENAME" == *.factory.bin ]]; then
         exit 1
     fi
 
-    # Determine OTA filename based on MCU type (unified OTA format)
+    # Determine OTA filename based on MCU type
-    OTAFILE="mt-${MCU}-ota.bin"
+    if [ "$MCU" == "esp32s3" ]; then
+        OTAFILE=bleota-s3.bin
+    elif [ "$MCU" == "esp32c3" ]; then
+        OTAFILE=bleota-c3.bin
+    else
+        OTAFILE=bleota.bin
+    fi
 
     # Set SPIFFS filename with "littlefs-" prefix.
     SPIFFSFILE="littlefs-${PROGNAME/firmware-/}.bin"
@@ -151,12 +144,12 @@ if [[ -f "$FILENAME" && "$FILENAME" == *.factory.bin ]]; then
     fi
 
     echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-    $ESPTOOL_CMD ${ESPTOOL_ERASE_FLASH}
+    $ESPTOOL_CMD erase-flash
-    $ESPTOOL_CMD ${ESPTOOL_WRITE_FLASH} $FIRMWARE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD write-flash $FIRMWARE_OFFSET "${FILENAME}"
     echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
-    $ESPTOOL_CMD ${ESPTOOL_WRITE_FLASH} $OTA_OFFSET "${OTAFILE}"
+    $ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
     echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
-    $ESPTOOL_CMD ${ESPTOOL_WRITE_FLASH} $OFFSET "${SPIFFSFILE}"
+    $ESPTOOL_CMD write_flash $OFFSET "${SPIFFSFILE}"
 
 else
     show_help

bin/device-update.sh

@@ -20,17 +20,6 @@ else
     exit 1
 fi
 
-# esptool v5 supports commands with dashes and deprecates commands with
-# underscores. Prior versions only support commands with underscores
-if ${ESPTOOL_CMD} | grep --quiet write-flash
-then
-    ESPTOOL_WRITE_FLASH=write-flash
-    ESPTOOL_READ_FLASH_STATUS=read-flash-status
-else
-    ESPTOOL_WRITE_FLASH=write_flash
-    ESPTOOL_READ_FLASH_STATUS=read_flash_status
-fi
-
 # Usage info
 show_help() {
 cat << EOF
@@ -80,7 +69,7 @@ done
 shift "$((OPTIND-1))"
 
 if [ "$CHANGE_MODE" = true ]; then
-    $ESPTOOL_CMD --baud $RESET_BAUD --after no_reset ${ESPTOOL_READ_FLASH_STATUS}
+	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
     exit 0
 fi
 
@@ -91,7 +80,7 @@ fi
 
 if [[ -f "$FILENAME" && "$FILENAME" != *.factory.bin ]]; then
     echo "Trying to flash update ${FILENAME}"
-    $ESPTOOL_CMD --baud $FLASH_BAUD ${ESPTOOL_WRITE_FLASH} $UPDATE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD --baud $FLASH_BAUD write-flash $UPDATE_OFFSET "${FILENAME}"
 else
     show_help
     echo "Invalid file: ${FILENAME}"

bin/generate_ci_matrix.py

@@ -43,7 +43,7 @@ for pio_env in pio_envs:
   env = {
     "ci": {"board": pio_env, "platform": env_platform},
     "board_level": cfg.get(f"env:{pio_env}", "board_level", default=None),
-    "board_check": cfg.get(f"env:{pio_env}", "board_check", default="false").strip().lower() == "true",
+    "board_check": bool(cfg.get(f"env:{pio_env}", "board_check", default=False)),
   }
   all_envs.append(env)
 

bin/generate_release_notes.py

@@ -1,355 +0,0 @@
-#!/usr/bin/env python3
-"""
-Generate release notes from merged PRs on develop and master branches.
-Categorizes PRs into Enhancements and Bug Fixes/Maintenance sections.
-"""
-
-import subprocess
-import re
-import json
-import sys
-from datetime import datetime
-
-
-def get_last_release_tag():
-    """Get the most recent release tag."""
-    result = subprocess.run(
-        ["git", "describe", "--tags", "--abbrev=0"],
-        capture_output=True,
-        text=True,
-        check=True,
-    )
-    return result.stdout.strip()
-
-
-def get_tag_date(tag):
-    """Get the commit date (ISO 8601) of the tag."""
-    result = subprocess.run(
-        ["git", "show", "-s", "--format=%cI", tag],
-        capture_output=True,
-        text=True,
-        check=True,
-    )
-    return result.stdout.strip()
-
-
-def get_merged_prs_since_tag(tag, branch):
-    """Get all merged PRs since the given tag on the specified branch."""
-    # Get commits since tag on the branch - look for PR numbers in parentheses
-    result = subprocess.run(
-        [
-            "git",
-            "log",
-            f"{tag}..origin/{branch}",
-            "--oneline",
-        ],
-        capture_output=True,
-        text=True,
-    )
-
-    prs = []
-    seen_pr_numbers = set()
-
-    for line in result.stdout.strip().split("\n"):
-        if not line:
-            continue
-
-        # Extract PR number from commit message - format: "Title (#1234)"
-        pr_match = re.search(r"\(#(\d+)\)", line)
-        if pr_match:
-            pr_number = pr_match.group(1)
-            if pr_number not in seen_pr_numbers:
-                seen_pr_numbers.add(pr_number)
-                prs.append(pr_number)
-
-    return prs
-
-
-def get_pr_details(pr_number):
-    """Get PR details from GitHub API via gh CLI."""
-    try:
-        result = subprocess.run(
-            [
-                "gh",
-                "pr",
-                "view",
-                pr_number,
-                "--json",
-                "title,author,labels,url",
-            ],
-            capture_output=True,
-            text=True,
-            check=True,
-        )
-        return json.loads(result.stdout)
-    except subprocess.CalledProcessError:
-        return None
-
-
-def should_exclude_pr(pr_details):
-    """Check if PR should be excluded from release notes."""
-    if not pr_details:
-        return True
-
-    title = pr_details.get("title", "").lower()
-
-    # Exclude trunk update PRs
-    if "upgrade trunk" in title or "update trunk" in title or "trunk update" in title:
-        return True
-
-    # Exclude protobuf update PRs
-    if "update protobufs" in title or "update protobuf" in title:
-        return True
-
-    # Exclude automated version bump PRs
-    if "bump release version" in title or "bump version" in title:
-        return True
-
-    return False
-
-
-def is_dependency_update(pr_details):
-    """Check if PR is a dependency/chore update."""
-    if not pr_details:
-        return False
-
-    title = pr_details.get("title", "").lower()
-    author = pr_details.get("author", {}).get("login", "").lower()
-    labels = [label.get("name", "").lower() for label in pr_details.get("labels", [])]
-
-    # Check for renovate or dependabot authors
-    if "renovate" in author or "dependabot" in author:
-        return True
-
-    # Check for chore(deps) pattern
-    if re.match(r"^chore\(deps\):", title):
-        return True
-
-    # Check for digest update patterns
-    if re.match(r".*digest to [a-f0-9]+", title, re.IGNORECASE):
-        return True
-
-    # Check for dependency-related labels
-    dependency_labels = ["dependencies", "deps", "renovate"]
-    if any(dep in label for label in labels for dep in dependency_labels):
-        return True
-
-    return False
-
-
-def is_enhancement(pr_details):
-    """Determine if PR is an enhancement based on labels and title."""
-    labels = [label.get("name", "").lower() for label in pr_details.get("labels", [])]
-
-    # Check labels first
-    enhancement_labels = ["enhancement", "feature", "feat", "new feature"]
-    for label in labels:
-        if any(enh in label for enh in enhancement_labels):
-            return True
-
-    # Check title prefixes
-    title = pr_details.get("title", "")
-    enhancement_prefixes = ["feat:", "feature:", "add:"]
-    title_lower = title.lower()
-    for prefix in enhancement_prefixes:
-        if title_lower.startswith(prefix) or f" {prefix}" in title_lower:
-            return True
-
-    return False
-
-
-def clean_title(title):
-    """Clean up PR title for release notes."""
-    # Remove common prefixes
-    prefixes_to_remove = [
-        r"^fix:\s*",
-        r"^feat:\s*",
-        r"^feature:\s*",
-        r"^bug:\s*",
-        r"^bugfix:\s*",
-        r"^chore:\s*",
-        r"^chore\([^)]+\):\s*",
-        r"^refactor:\s*",
-        r"^docs:\s*",
-        r"^ci:\s*",
-        r"^build:\s*",
-        r"^perf:\s*",
-        r"^style:\s*",
-        r"^test:\s*",
-    ]
-
-    cleaned = title
-    for prefix in prefixes_to_remove:
-        cleaned = re.sub(prefix, "", cleaned, flags=re.IGNORECASE)
-
-    # Ensure first letter is capitalized
-    if cleaned:
-        cleaned = cleaned[0].upper() + cleaned[1:]
-
-    return cleaned.strip()
-
-
-def format_pr_line(pr_details):
-    """Format a PR as a markdown bullet point."""
-    title = clean_title(pr_details.get("title", "Unknown"))
-    author = pr_details.get("author", {}).get("login", "unknown")
-    url = pr_details.get("url", "")
-
-    return f"- {title} by @{author} in {url}"
-
-
-def get_new_contributors(pr_details_list, tag, repo="meshtastic/firmware"):
-    """Find contributors who made their first merged PR before this release.
-
-    GitHub usernames do not necessarily match git commit authors, so we use the
-    GitHub search API via `gh` to see if the user has any merged PRs before the
-    tag date. This mirrors how GitHub's "Generate release notes" feature works.
-    """
-
-    bot_authors = {"github-actions", "renovate", "dependabot", "app/renovate", "app/github-actions", "app/dependabot"}
-
-    new_contributors = []
-    seen_authors = set()
-
-    try:
-        tag_date = get_tag_date(tag)
-    except subprocess.CalledProcessError:
-        print(f"Warning: Could not determine tag date for {tag}; skipping new contributor detection", file=sys.stderr)
-        return []
-
-    for pr in pr_details_list:
-        author = pr.get("author", {}).get("login", "")
-        if not author or author in seen_authors:
-            continue
-
-        # Skip bots
-        if author.lower() in bot_authors or author.startswith("app/"):
-            continue
-
-        seen_authors.add(author)
-
-        try:
-            # Search for merged PRs by this author created before the tag date
-            search_query = f"is:pr author:{author} repo:{repo} closed:<=\"{tag_date}\""
-            search = subprocess.run(
-                [
-                    "gh",
-                    "search",
-                    "issues",
-                    "--json",
-                    "number,mergedAt,createdAt",
-                    "--state",
-                    "closed",
-                    "--limit",
-                    "200",
-                    search_query,
-                ],
-                capture_output=True,
-                text=True,
-            )
-
-            if search.returncode != 0:
-                # If gh fails, be conservative and skip adding to new contributors
-                print(f"Warning: gh search failed for author {author}: {search.stderr.strip()}", file=sys.stderr)
-                continue
-
-            results = json.loads(search.stdout or "[]")
-            # If any merged PR exists before or on tag date, not a new contributor
-            had_prior_pr = any(item.get("mergedAt") for item in results)
-
-            if not had_prior_pr:
-                new_contributors.append((author, pr.get("url", "")))
-
-        except Exception as e:
-            print(f"Warning: Could not check contributor history for {author}: {e}", file=sys.stderr)
-            continue
-
-    return new_contributors
-
-
-def main():
-    if len(sys.argv) < 2:
-        print("Usage: generate_release_notes.py <new_version>", file=sys.stderr)
-        sys.exit(1)
-
-    new_version = sys.argv[1]
-
-    # Get last release tag
-    try:
-        last_tag = get_last_release_tag()
-    except subprocess.CalledProcessError:
-        print("Error: Could not find last release tag", file=sys.stderr)
-        sys.exit(1)
-
-    # Collect PRs from both branches
-    all_pr_numbers = set()
-
-    for branch in ["develop", "master"]:
-        try:
-            prs = get_merged_prs_since_tag(last_tag, branch)
-            all_pr_numbers.update(prs)
-        except Exception as e:
-            print(f"Warning: Could not get PRs from {branch}: {e}", file=sys.stderr)
-
-    # Get details for all PRs
-    enhancements = []
-    bug_fixes = []
-    dependencies = []
-    all_pr_details = []
-
-    for pr_number in sorted(all_pr_numbers, key=int):
-        details = get_pr_details(pr_number)
-        if details and not should_exclude_pr(details):
-            all_pr_details.append(details)
-            if is_dependency_update(details):
-                dependencies.append(details)
-            elif is_enhancement(details):
-                enhancements.append(details)
-            else:
-                bug_fixes.append(details)
-
-    # Generate release notes
-    output = []
-
-    if enhancements:
-        output.append("## 🚀 Enhancements\n")
-        for pr in enhancements:
-            output.append(format_pr_line(pr))
-        output.append("")
-
-    if bug_fixes:
-        output.append("## 🐛 Bug fixes and maintenance\n")
-        for pr in bug_fixes:
-            output.append(format_pr_line(pr))
-        output.append("")
-
-    if dependencies:
-        output.append("## ⚙️ Dependencies\n")
-        for pr in dependencies:
-            output.append(format_pr_line(pr))
-        output.append("")
-
-    # Find new contributors (GitHub-accurate check using merged PRs before tag date)
-    new_contributors = get_new_contributors(all_pr_details, last_tag)
-    if new_contributors:
-        output.append("## New Contributors\n")
-        for author, url in new_contributors:
-            # Find first PR URL for this contributor
-            first_pr_url = url
-            for pr in all_pr_details:
-                if pr.get("author", {}).get("login") == author:
-                    first_pr_url = pr.get("url", url)
-                    break
-            output.append(f"- @{author} made their first contribution in {first_pr_url}")
-        output.append("")
-
-    # Add full changelog link
-    output.append(
-        f"**Full Changelog**: https://github.com/meshtastic/firmware/compare/{last_tag}...v{new_version}"
-    )
-
-    print("\n".join(output))
-
-
-if __name__ == "__main__":
-    main()

bin/meshtasticd-start.sh

@@ -1,32 +0,0 @@
-#!/usr/bin/env sh
-
-INSTANCE=$1
-CONF_DIR="/etc/meshtasticd/config.d"
-VFS_DIR="/var/lib"
-
-# If no instance ID provided, start bare daemon and exit
-echo "no instance ID provided, starting bare meshtasticd service"
-if [ -z "${INSTANCE}" ]; then
-  /usr/bin/meshtasticd
-  exit 0
-fi
-
-# Make VFS dir if it does not exist
-if [ ! -d "${VFS_DIR}/meshtasticd-${INSTANCE}" ]; then
-  echo "vfs for ${INSTANCE} does not exist, creating it."
-  mkdir "${VFS_DIR}/meshtasticd-${INSTANCE}"
-fi
-
-# Abort if config for $INSTANCE does not exist
-if [ ! -f "${CONF_DIR}/config-${INSTANCE}.yaml" ]; then
-  echo "no config for ${INSTANCE} found in ${CONF_DIR}. refusing to start" >&2
-  exit 1
-fi
-
-# Start meshtasticd with instance parameters
-printf "starting meshtasticd-%s..., ${INSTANCE}"
-if /usr/bin/meshtasticd --config="${CONF_DIR}/config-${INSTANCE}.yaml" --fsdir="${VFS_DIR}/meshtasticd-${INSTANCE}"; then
-  echo "ok"
-else
-  echo "failed"
-fi

bin/meshtasticd.service

@@ -1,5 +1,5 @@
 [Unit]
-Description=Meshtastic %i Daemon
+Description=Meshtastic Native Daemon
 After=network-online.target
 StartLimitInterval=200
 StartLimitBurst=5
@@ -9,7 +9,7 @@ AmbientCapabilities=CAP_NET_BIND_SERVICE
 User=meshtasticd
 Group=meshtasticd
 Type=simple
-ExecStart=/usr/bin/meshtasticd-start.sh %i
+ExecStart=/usr/bin/meshtasticd
 Restart=always
 RestartSec=3
 

bin/native-install.sh

@@ -1,7 +1,6 @@
 #!/usr/bin/env bash
 
 cp "release/meshtasticd_linux_$(uname -m)" /usr/bin/meshtasticd
-cp "bin/meshtasticd-start.sh" /usr/bin/meshtasticd-start.sh
 mkdir -p /etc/meshtasticd
 if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
 	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,21 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.22" date="2026-04-06">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.22</url>
-    </release>
-    <release version="2.7.21" date="2026-03-11">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.21</url>
-    </release>
-    <release version="2.7.20" date="2026-02-11">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.20</url>
-    </release>
-    <release version="2.7.19" date="2026-01-22">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.19</url>
-    </release>
-    <release version="2.7.18" date="2026-01-02">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.18</url>
-    </release>
     <release version="2.7.17" date="2025-11-28">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.17</url>
     </release>

bin/platformio-custom.py

@@ -2,12 +2,11 @@
 # trunk-ignore-all(ruff/F821)
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
-from os.path import join
+from os.path import join, basename, isfile
 import subprocess
 import json
 import re
 from datetime import datetime
-from typing import Dict
 
 from readprops import readProps
 
@@ -15,59 +14,9 @@ Import("env")
 platform = env.PioPlatform()
 progname = env.get("PROGNAME")
 lfsbin = f"{progname.replace('firmware-', 'littlefs-')}.bin"
-manifest_ran = False
-
-def infer_architecture(board_cfg):
-    try:
-        mcu = board_cfg.get("build.mcu") if board_cfg else None
-    except KeyError:
-        mcu = None
-    except Exception:
-        mcu = None
-    if not mcu:
-        return None
-    mcu_l = str(mcu).lower()
-    if "esp32s3" in mcu_l:
-        return "esp32-s3"
-    if "esp32c6" in mcu_l:
-        return "esp32-c6"
-    if "esp32c3" in mcu_l:
-        return "esp32-c3"
-    if "esp32" in mcu_l:
-        return "esp32"
-    if "rp2040" in mcu_l:
-        return "rp2040"
-    if "rp2350" in mcu_l:
-        return "rp2350"
-    if "nrf52" in mcu_l or "nrf52840" in mcu_l:
-        return "nrf52840"
-    if "stm32" in mcu_l:
-        return "stm32"
-    return None
 
 def manifest_gather(source, target, env):
-    global manifest_ran
-    if manifest_ran:
-        return
-    # Skip manifest generation if we cannot determine architecture (host/native builds)
-    board_arch = infer_architecture(env.BoardConfig())
-    if not board_arch:
-        print(f"Skipping mtjson generation for unknown architecture (env={env.get('PIOENV')})")
-        manifest_ran = True
-        return
-    manifest_ran = True
     out = []
-    board_platform = env.BoardConfig().get("platform")
-    board_mcu = env.BoardConfig().get("build.mcu").lower()
-    needs_ota_suffix = board_platform == "nordicnrf52"
-    
-    # Mapping of bin files to their target partition names
-    # Maps the filename pattern to the partition name where it should be flashed
-    partition_map = {
-        f"{progname}.bin": "app0",              # primary application slot (app0 / OTA_0)
-        lfsbin: "spiffs",                        # filesystem image flashed to spiffs
-    }
-    
     check_paths = [
         progname,
         f"{progname}.elf",
@@ -78,62 +27,29 @@ def manifest_gather(source, target, env):
         f"{progname}.uf2",
         f"{progname}.factory.uf2",
         f"{progname}.zip",
-        lfsbin,
+        lfsbin
-        f"mt-{board_mcu}-ota.bin",
-        "bleota-c3.bin"
     ]
     for p in check_paths:
         f = env.File(env.subst(f"$BUILD_DIR/{p}"))
         if f.exists():
-            manifest_name = p
-            if needs_ota_suffix and p == f"{progname}.zip":
-                manifest_name = f"{progname}-ota.zip"
             d = {
-                "name": manifest_name,
+                "name": p,
                 "md5": f.get_content_hash(), # Returns MD5 hash
                 "bytes": f.get_size() # Returns file size in bytes
             }
-            # Add part_name if this file represents a partition that should be flashed
-            if p in partition_map:
-                d["part_name"] = partition_map[p]
             out.append(d)
             print(d)
     manifest_write(out, env)
 
 def manifest_write(files, env):
-    # Defensive: also skip manifest writing if we cannot determine architecture
-    def get_project_option(name):
-        try:
-            return env.GetProjectOption(name)
-        except Exception:
-            return None
-
-    def get_project_option_any(names):
-        for name in names:
-            val = get_project_option(name)
-            if val is not None:
-                return val
-        return None
-
-    def as_bool(val):
-        return str(val).strip().lower() in ("1", "true", "yes", "on")
-
-    def as_int(val):
-        try:
-            return int(str(val), 10)
-        except (TypeError, ValueError):
-            return None
-
-    def as_list(val):
-        return [item.strip() for item in str(val).split(",") if item.strip()]
-
     manifest = {
         "version": verObj["long"],
         "build_epoch": build_epoch,
-        "platformioTarget": env.get("PIOENV"),
+        "board": env.get("PIOENV"),
         "mcu": env.get("BOARD_MCU"),
         "repo": repo_owner,
         "files": files,
+        "part": None,
         "has_mui": False,
         "has_inkhud": False,
     }
@@ -148,51 +64,6 @@ def manifest_write(files, env):
     if "MESHTASTIC_INCLUDE_INKHUD" in env.get("CPPDEFINES", []):
         manifest["has_inkhud"] = True
 
-    pioenv = env.get("PIOENV")
-    device_meta = {}
-    device_meta_fields = [
-        ("hwModel", ["custom_meshtastic_hw_model"], as_int),
-        ("hwModelSlug", ["custom_meshtastic_hw_model_slug"], str),
-        ("architecture", ["custom_meshtastic_architecture"], str),
-        ("activelySupported", ["custom_meshtastic_actively_supported"], as_bool),
-        ("displayName", ["custom_meshtastic_display_name"], str),
-        ("supportLevel", ["custom_meshtastic_support_level"], as_int),
-        ("images", ["custom_meshtastic_images"], as_list),
-        ("tags", ["custom_meshtastic_tags"], as_list),
-        ("requiresDfu", ["custom_meshtastic_requires_dfu"], as_bool),
-        ("partitionScheme", ["custom_meshtastic_partition_scheme"], str),
-        ("url", ["custom_meshtastic_url"], str),
-        ("key", ["custom_meshtastic_key"], str),
-        ("variant", ["custom_meshtastic_variant"], str),
-    ]
-
-
-    for manifest_key, option_keys, caster in device_meta_fields:
-        raw_val = get_project_option_any(option_keys)
-        if raw_val is None:
-            continue
-        parsed = caster(raw_val) if callable(caster) else raw_val
-        if parsed is not None and parsed != "":
-            device_meta[manifest_key] = parsed
-
-    # Determine architecture once; if we can't infer it, skip manifest generation
-    board_arch = device_meta.get("architecture") or infer_architecture(env.BoardConfig())
-    if not board_arch:
-        print(f"Skipping mtjson write for unknown architecture (env={env.get('PIOENV')})")
-        return
-
-    device_meta["architecture"] = board_arch
-
-    # Always set requiresDfu: true for nrf52840 targets
-    if board_arch == "nrf52840":
-        device_meta["requiresDfu"] = True
-
-    device_meta.setdefault("displayName", pioenv)
-    device_meta.setdefault("activelySupported", False)
-
-    if device_meta:
-        manifest.update(device_meta)
-
     # Write the manifest to the build directory
     with open(env.subst("$BUILD_DIR/${PROGNAME}.mt.json"), "w") as f:
         json.dump(manifest, f, indent=2)
@@ -288,42 +159,20 @@ def load_boot_logo(source, target, env):
 
 # Load the boot logo on TFT builds
 if ("HAS_TFT", 1) in env.get("CPPDEFINES", []):
-    env.AddPreAction(f"$BUILD_DIR/{lfsbin}", load_boot_logo)
+    env.AddPreAction('$BUILD_DIR/littlefs.bin', load_boot_logo)
 
-board_arch = infer_architecture(env.BoardConfig())
+# Rename (mv) littlefs.bin to include the PROGNAME
-should_skip_manifest = board_arch is None
+# This ensures the littlefs.bin is named consistently with the firmware
+env.AddPostAction('$BUILD_DIR/littlefs.bin', env.VerboseAction(
+    f'mv $BUILD_DIR/littlefs.bin $BUILD_DIR/{lfsbin}',
+    f'Renaming littlefs.bin to {lfsbin}'
+))
 
-# For host/native envs, avoid depending on 'buildprog' (some targets don't define it)
+env.AddCustomTarget(
-mtjson_deps = [] if should_skip_manifest else ["buildprog"]
+    name="mtjson",
-if not should_skip_manifest and platform.name == "espressif32":
+    dependencies=None,
-    # Build littlefs image as part of mtjson target
+    actions=[manifest_gather],
-    # Equivalent to `pio run -t buildfs`
+    title="Meshtastic Manifest",
-    target_lfs = env.DataToBin(
+    description="Generating Meshtastic manifest JSON + Checksums",
-        join("$BUILD_DIR", "${ESP32_FS_IMAGE_NAME}"), "$PROJECT_DATA_DIR"
+    always_build=True,
-    )
+)
-    mtjson_deps.append(target_lfs)
-
-if should_skip_manifest:
-    def skip_manifest(source, target, env):
-        print(f"mtjson: skipped for native environment: {env.get('PIOENV')}")
-
-    env.AddCustomTarget(
-        name="mtjson",
-        dependencies=mtjson_deps,
-        actions=[skip_manifest],
-        title="Meshtastic Manifest (skipped)",
-        description="mtjson generation is skipped for native environments",
-        always_build=True,
-    )
-else:
-    env.AddCustomTarget(
-        name="mtjson",
-        dependencies=mtjson_deps,
-        actions=[manifest_gather],
-        title="Meshtastic Manifest",
-        description="Generating Meshtastic manifest JSON + Checksums",
-        always_build=True,
-    )
-
-    # Run manifest generation as part of the default build pipeline for non-native builds.
-    env.Default("mtjson")

bin/platformio-pre.py

@@ -11,9 +11,6 @@ else:
     prefsLoc = env["PROJECT_DIR"] + "/version.properties"
     verObj = readProps(prefsLoc)
     env.Replace(PROGNAME=f"firmware-{env.get('PIOENV')}-{verObj['long']}")
-    env.Replace(ESP32_FS_IMAGE_NAME=f"littlefs-{env.get('PIOENV')}-{verObj['long']}")
 
 # Print the new program name for verification
 print(f"PROGNAME: {env.get('PROGNAME')}")
-if platform.name == "espressif32":
-    print(f"ESP32_FS_IMAGE_NAME: {env.get('ESP32_FS_IMAGE_NAME')}")

bin/readprops.py

@@ -18,9 +18,8 @@ def readProps(prefsLoc):
 
     # Try to find current build SHA if if the workspace is clean.  This could fail if git is not installed
     try:
-        # Pin abbreviation length to keep local builds and CI matching (avoid auto-shortening)
         sha = (
-            subprocess.check_output(["git", "rev-parse", "--short=7", "HEAD"])
+            subprocess.check_output(["git", "rev-parse", "--short", "HEAD"])
             .decode("utf-8")
             .strip()
         )

bin/shame.py

@@ -1,95 +0,0 @@
-import sys
-import os
-import json
-from github import Github
-
-def parseFile(path):
-    with open(path, "r") as f:
-        data = json.loads(f)
-    for file in data["files"]:
-        if file["name"].endswith(".bin"):
-            return file["name"], file["bytes"]
-
-if len(sys.argv) != 4:
-    print(f"expected usage: {sys.argv[0]} <PR number> <path to old-manifests> <path to new-manifests>")
-    sys.exit(1)
-
-pr_number = int(sys.argv[1])
-
-token = os.getenv("GITHUB_TOKEN")
-if not token:
-    raise EnvironmentError("GITHUB_TOKEN not found in environment.")
-
-repo_name = os.getenv("GITHUB_REPOSITORY")  # "owner/repo"
-if not repo_name:
-    raise EnvironmentError("GITHUB_REPOSITORY not found in environment.")
-
-oldFiles = sys.argv[2]
-old = set(os.path.join(oldFiles, f) for f in os.listdir(oldFiles) if os.path.isfile(f))
-newFiles = sys.argv[3]
-new = set(os.path.join(newFiles, f) for f in os.listdir(newFiles) if os.path.isfile(f))
-
-startMarkdown = "# Target Size Changes\n\n"
-markdown = ""
-
-newlyIntroduced = new - old
-if len(newlyIntroduced) > 0:
-    markdown += "## Newly Introduced Targets\n\n"
-    # create a table
-    markdown += "| File | Size |\n"
-    markdown += "| ---- | ---- |\n"
-    for f in newlyIntroduced:
-        name, size = parseFile(f)
-        markdown += f"| `{name}` | {size}b |\n"
-
-# do not log removed targets
-# PRs only run a small subset of builds, so removed targets are not meaningful
-# since they are very likely to just be not ran in PR CI
-
-both = old & new
-degradations = []
-improvements = []
-for f in both:
-    oldName, oldSize = parseFile(f)
-    _, newSize = parseFile(f)
-    if oldSize != newSize:
-        if newSize < oldSize:
-            improvements.append((oldName, oldSize, newSize))
-        else:
-            degradations.append((oldName, oldSize, newSize))
-
-if len(degradations) > 0:
-    markdown += "\n## Degradation\n\n"
-    # create a table
-    markdown += "| File | Difference | Old Size | New Size |\n"
-    markdown += "| ---- | ---------- | -------- | -------- |\n"
-    for oldName, oldSize, newSize in degradations:
-        markdown += f"| `{oldName}` | **{oldSize - newSize}b** | {oldSize}b | {newSize}b |\n"
-
-if len(improvements) > 0:
-    markdown += "\n## Improvement\n\n"
-    # create a table
-    markdown += "| File | Difference | Old Size | New Size |\n"
-    markdown += "| ---- | ---------- | -------- | -------- |\n"
-    for oldName, oldSize, newSize in improvements:
-        markdown += f"| `{oldName}` | **{oldSize - newSize}b** | {oldSize}b | {newSize}b |\n"
-
-if len(markdown) == 0:
-    markdown = "No changes in target sizes detected."
-
-g = Github(token)
-repo = g.get_repo(repo_name)
-pr = repo.get_pull(pr_number)
-
-existing_comment = None
-for comment in pr.get_issue_comments():
-    if comment.body.startswith(startMarkdown):
-        existing_comment = comment
-        break
-
-final_markdown = startMarkdown + markdown
-
-if existing_comment:
-    existing_comment.edit(body=final_markdown)
-else:
-    pr.create_issue_comment(body=final_markdown)

bin/test-native-docker.sh

@@ -1,44 +0,0 @@
-#!/usr/bin/env bash
-# Run native PlatformIO tests inside Docker (for macOS / non-Linux hosts).
-#
-# Usage:
-#   ./bin/test-native-docker.sh                          # run all native tests
-#   ./bin/test-native-docker.sh -f test_transmit_history  # run specific test filter
-#   ./bin/test-native-docker.sh --rebuild                 # force rebuild the image
-#
-set -euo pipefail
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
-ROOT_DIR="$(cd "$SCRIPT_DIR/.." && pwd)"
-IMAGE_NAME="meshtastic-native-test"
-
-REBUILD=false
-EXTRA_ARGS=()
-
-for arg in "$@"; do
-    if [[ "$arg" == "--rebuild" ]]; then
-        REBUILD=true
-    else
-        EXTRA_ARGS+=("$arg")
-    fi
-done
-
-if $REBUILD || ! docker image inspect "$IMAGE_NAME" >/dev/null 2>&1; then
-    echo "Building test image (first run may take a few minutes)..."
-    docker build -t "$IMAGE_NAME" -f "$ROOT_DIR/Dockerfile.test" "$ROOT_DIR"
-fi
-
-# Disable BUILD_EPOCH to avoid full rebuilds between test runs (matches CI)
-sed_cmd='s/-DBUILD_EPOCH=$UNIX_TIME/#-DBUILD_EPOCH=$UNIX_TIME/'
-
-# Default: run all tests. Pass extra args (e.g. -f test_transmit_history) through.
-if [[ ${#EXTRA_ARGS[@]} -eq 0 ]]; then
-    CMD=("platformio" "test" "-e" "coverage" "-v")
-else
-    CMD=("platformio" "test" "-e" "coverage" "-v" "${EXTRA_ARGS[@]}")
-fi
-
-exec docker run --rm \
-    -v "$ROOT_DIR:/src:ro" \
-    "$IMAGE_NAME" \
-    bash -c "rm -rf /tmp/fw-test && cp -a /src /tmp/fw-test && cd /tmp/fw-test && sed -i '${sed_cmd}' platformio.ini && ${CMD[*]}"

boards/CDEBYTE_EoRa-Hub.json

@@ -1,38 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "partitions": "default.csv",
-      "memory_type": "qio_qspi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi"],
-  "debug": {
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "CDEBYTE_EoRa-Hub",
-  "upload": {
-    "flash_size": "4MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 4194304,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://www.cdebyte.com/products/EoRa-HUB-900TB",
-  "vendor": "CDEBYTE"
-}

boards/ThinkNode-M4.json

@@ -1,53 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_ELECROW_M4 -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
-    ],
-    "usb_product": "elecrow_thinknode_m4",
-    "mcu": "nrf52840",
-    "variant": "ELECROW-ThinkNode-M4",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "ELECROW ThinkNode m4",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://www.elecrow.com/thinknode-m4-power-bank-lora-device-with-meshtastic-lora-tracker-function-powered-by-nrf52840.html",
-  "vendor": "ELECROW"
-}