t2000-wip

.github/actions/setup-base/action.yml

@@ -8,6 +8,8 @@ runs:
       uses: actions/checkout@v6
       with:
         submodules: recursive
+        ref: ${{github.event.pull_request.head.ref}}
+        repository: ${{github.event.pull_request.head.repo.full_name}}
 
     - name: Install dependencies
       shell: bash

.github/workflows/build_debian_src.yml

@@ -16,7 +16,8 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
+  packages: write
 
 jobs:
   build-debian-src:
@@ -27,6 +28,8 @@ jobs:
         with:
           submodules: recursive
           path: meshtasticd
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Install deps
         shell: bash
@@ -39,7 +42,6 @@ jobs:
           sudo mk-build-deps --install --remove --tool='apt-get -o Debug::pkgProblemResolver=yes --no-install-recommends --yes' debian/control
 
       - name: Import GPG key
-        if: github.event_name != 'pull_request' && github.event_name != 'pull_request_target'
         uses: crazy-max/ghaction-import-gpg@v7
         with:
           gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
@@ -58,7 +60,7 @@ jobs:
         run: debian/ci_pack_sdeb.sh
         env:
           SERIES: ${{ inputs.series }}
-          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid || '' }}
+          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid }}
           PKG_VERSION: ${{ steps.version.outputs.deb }}
 
       - name: Store binaries as an artifact

.github/workflows/build_firmware.yml

@@ -26,6 +26,8 @@ jobs:
       - uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Build ${{ inputs.platform }}
         id: build

.github/workflows/build_one_target.yml

@@ -4,14 +4,9 @@ on:
   workflow_dispatch:
     inputs:
       # trunk-ignore(checkov/CKV_GHA_7)
-      target:
-        type: string
-        required: false
-        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
       arch:
         type: choice
         options:
-          - all
           - esp32
           - esp32s3
           - esp32c3
@@ -20,18 +15,32 @@ on:
           - rp2040
           - rp2350
           - stm32
-        description: Choose an arch to limit the search, or 'all' to search all architectures.
-        default: all
+      target:
+        type: string
+        required: false
+        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
+      # find-target:
+      #   type: boolean
+      #   default: true
+      #   description: 'Find the available targets'
 
 permissions: read-all
 
 jobs:
   find-targets:
+    if: ${{ inputs.target == '' }}
     strategy:
       fail-fast: false
       matrix:
         arch:
-          - all
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
     runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v6
@@ -42,37 +51,14 @@ jobs:
       - run: pip install -U platformio
       - name: Generate matrix
         id: jsonStep
-        env:
-          BUILDTARGET: ${{ inputs.target }}
-          MATRIXARCH: ${{ inputs.arch }}
         run: |
           TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level extra)
-          if [ "$BUILDTARGET" = "" ]; then
-            echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
-            echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
-            echo "Arch: $MATRIXARCH" >> $GITHUB_STEP_SUMMARY
-            echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
-            echo "## 🎯 The following target boards are available to build:" >> $GITHUB_STEP_SUMMARY
-            echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
-            echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
-            echo $TARGETS | jq -r 'sort_by(.board) | sort_by(.platform) |.[] | "| " + .platform + " | " + .board + " |" ' >> $GITHUB_STEP_SUMMARY
-          else
-            echo "We build this one:" >> $GITHUB_STEP_SUMMARY
-            ARCH=$(echo "$TARGETS" | jq --arg BUILDTARGET "$BUILDTARGET" -r '.[] | select(.board==$BUILDTARGET) | .platform')
-            echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
-            echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
-            echo "| $ARCH | "$BUILDTARGET" |" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            if [[ "$ARCH" == "" ]]; then
-              echo "## ❌ Error: Target "$BUILDTARGET" not found!" >> $GITHUB_STEP_SUMMARY
-            else
-              echo "## ✅ Target "$BUILDTARGET" found, proceeding to build." >> $GITHUB_STEP_SUMMARY
-            fi
-            echo "You may need to refresh this page to make the built firmware appear below." >> $GITHUB_STEP_SUMMARY
-            echo "arch=$ARCH" >> $GITHUB_OUTPUT
-          fi
-    outputs:
-      arch: ${{ steps.jsonStep.outputs.arch }}
+          echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
+          echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
+          echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
+          echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
+          echo "Targets:" >> $GITHUB_STEP_SUMMARY
+          echo $TARGETS | jq -r 'sort_by(.board) |.[] | "- " + .board' >> $GITHUB_STEP_SUMMARY
 
   version:
     if: ${{ inputs.target != '' }}
@@ -92,16 +78,16 @@ jobs:
 
   build:
     if: ${{ inputs.target != '' && inputs.arch != 'native' }}
-    needs: [version, find-targets]
+    needs: [version]
     uses: ./.github/workflows/build_firmware.yml
     with:
       version: ${{ needs.version.outputs.long }}
       pio_env: ${{ inputs.target }}
-      platform: ${{ needs.find-targets.outputs.arch }}
+      platform: ${{ inputs.arch }}
 
   gather-artifacts:
     permissions:
-      contents: read
+      contents: write
       pull-requests: write
     runs-on: ubuntu-latest
     needs: [version, build]

.github/workflows/daily_packaging.yml

@@ -5,7 +5,7 @@ on:
   workflow_dispatch:
   push:
     branches:
-      - develop # Default branch, same as 'cron' above
+      - master
     paths:
       - debian/**
       - "*.rpkg"
@@ -16,7 +16,7 @@ on:
       - .github/workflows/hook_copr.yml
 
 permissions:
-  contents: read
+  contents: write
   packages: write
 
 jobs:

.github/workflows/docker_build.yml

@@ -37,7 +37,7 @@ on:
         value: ${{ jobs.docker-build.outputs.digest }}
 
 permissions:
-  contents: read
+  contents: write
   packages: write
 
 jobs:
@@ -50,6 +50,8 @@ jobs:
         uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Get release version string
         run: |

.github/workflows/docker_manifest.yml

@@ -12,7 +12,7 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
   packages: write
 
 jobs:
@@ -86,6 +86,8 @@ jobs:
         uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Get release version string
         run: |

.github/workflows/hook_copr.yml

@@ -11,7 +11,8 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
+  packages: write
 
 jobs:
   build-copr-hook:
@@ -21,6 +22,8 @@ jobs:
         uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{ github.ref }}
+          repository: ${{ github.repository }}
 
       - name: Trigger COPR build
         uses: vidplace7/copr-build@main

.github/workflows/main_matrix.yml

@@ -15,7 +15,8 @@ on:
       - "**.md"
       - version.properties
 
-  pull_request:
+  # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
+  pull_request_target:
     branches:
       - master
       - develop
@@ -28,8 +29,6 @@ on:
 
   workflow_dispatch:
 
-permissions: read-all
-
 jobs:
   setup:
     strategy:
@@ -89,6 +88,8 @@ jobs:
       - uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
       - name: Check ${{ matrix.check.board }}
         uses: meshtastic/gh-action-firmware@main
         with:
@@ -125,16 +126,9 @@ jobs:
 
   test-native:
     if: ${{ !contains(github.ref_name, 'event/') && github.repository == 'meshtastic/firmware' }}
-    permissions: # Needed for dorny/test-reporter.
-      contents: read
-      actions: read
-      checks: write
     uses: ./.github/workflows/test_native.yml
 
   docker:
-    permissions: # Needed for pushing to GHCR.
-      contents: read
-      packages: write
     strategy:
       fail-fast: false
       matrix:
@@ -159,6 +153,9 @@ jobs:
   gather-artifacts:
     # trunk-ignore(checkov/CKV2_GHA_1)
     if: github.repository == 'meshtastic/firmware'
+    permissions:
+      contents: write
+      pull-requests: write
     strategy:
       fail-fast: false
       matrix:
@@ -176,6 +173,9 @@ jobs:
     steps:
       - name: Checkout code
         uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - uses: actions/download-artifact@v8
         with:
@@ -231,6 +231,13 @@ jobs:
           path: ./*.elf
           retention-days: 30
 
+      - uses: scruplelesswizard/comment-artifact@main
+        if: ${{ github.event_name == 'pull_request' }}
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+
   shame:
     if: github.repository == 'meshtastic/firmware'
     continue-on-error: true
@@ -238,7 +245,7 @@ jobs:
     needs: [build]
     steps:
       - uses: actions/checkout@v6
-        if: github.event_name == 'pull_request'
+        if: github.event_name == 'pull_request_target'
         with:
           filter: blob:none # means we download all the git history but none of the commit (except ones with checkout like the head)
           fetch-depth: 0
@@ -256,26 +263,24 @@ jobs:
           overwrite: true
           path: manifests-new/*.mt.json
       - name: Find the merge base
-        if: github.event_name == 'pull_request'
+        if: github.event_name == 'pull_request_target'
         run: echo "MERGE_BASE=$(git merge-base "origin/$base" "$head")" >> $GITHUB_ENV
         env:
           base: ${{ github.base_ref }}
           head: ${{ github.sha }}
       # Currently broken (for-loop through EVERY artifact -- rate limiting)
       # - name: Download the old manifests
-      #   if: github.event_name == 'pull_request'
+      #   if: github.event_name == 'pull_request_target'
       #   run: gh run download -R "$repo" --name "manifests-$merge_base" --dir manifest-old/
       #   env:
       #     GH_TOKEN: ${{ github.token }}
       #     merge_base: ${{ env.MERGE_BASE }}
       #     repo: ${{ github.repository }}
       # - name: Do scan and post comment
-      #   if: github.event_name == 'pull_request'
+      #   if: github.event_name == 'pull_request_target'
       #   run: python3 bin/shame.py ${{ github.event.pull_request.number }} manifests-old/ manifests-new/
 
   release-artifacts:
-    permissions: # Needed for 'gh release upload'.
-      contents: write
     runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     outputs:
@@ -367,8 +372,6 @@ jobs:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
   release-firmware:
-    permissions: # Needed for 'gh release upload'.
-      contents: write
     strategy:
       fail-fast: false
       matrix:

.github/workflows/merge_queue.yml

@@ -0,0 +1,371 @@
+name: Merge Queue
+# Not sure how concurrency works in merge_queue, removing for now.
+# concurrency:
+#   group: merge-queue-${{ github.head_ref || github.run_id }}
+#   cancel-in-progress: true
+on:
+  # Merge group is a special trigger that is used to trigger the workflow when a merge group is created.
+  merge_group:
+
+jobs:
+  setup:
+    strategy:
+      fail-fast: true
+      matrix:
+        arch:
+          - all
+          - check
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v6
+      - uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+          cache: pip
+      - run: pip install -U platformio
+      - name: Generate matrix
+        id: jsonStep
+        run: |
+          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
+          else  
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level pr)
+          fi
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
+          echo "${{matrix.arch}}=$TARGETS" >> $GITHUB_OUTPUT
+    outputs:
+      all: ${{ steps.jsonStep.outputs.all }}
+      check: ${{ steps.jsonStep.outputs.check }}
+
+  version:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v6
+      - name: Get release version string
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        id: version
+        env:
+          BUILD_LOCATION: local
+    outputs:
+      long: ${{ steps.version.outputs.long }}
+      deb: ${{ steps.version.outputs.deb }}
+
+  check:
+    needs: setup
+    strategy:
+      fail-fast: true
+      matrix:
+        check: ${{ fromJson(needs.setup.outputs.check) }}
+
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name != 'workflow_dispatch' }}
+    steps:
+      - uses: actions/checkout@v6
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+      - name: Check ${{ matrix.check.board }}
+        run: bin/check-all.sh ${{ matrix.check.board }}
+
+  build:
+    needs: [setup, version]
+    strategy:
+      matrix:
+        build: ${{ fromJson(needs.setup.outputs.all) }}
+    uses: ./.github/workflows/build_firmware.yml
+    with:
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.build.board }}
+      platform: ${{ matrix.build.platform }}
+
+  build-debian-src:
+    if: github.repository == 'meshtastic/firmware'
+    uses: ./.github/workflows/build_debian_src.yml
+    with:
+      series: UNRELEASED
+      build_location: local
+    secrets: inherit
+
+  package-pio-deps-native-tft:
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    uses: ./.github/workflows/package_pio_deps.yml
+    with:
+      pio_env: native-tft
+    secrets: inherit
+
+  test-native:
+    if: ${{ !contains(github.ref_name, 'event/') }}
+    uses: ./.github/workflows/test_native.yml
+
+  docker:
+    strategy:
+      fail-fast: false
+      matrix:
+        distro: [debian, alpine]
+        platform: [linux/amd64, linux/arm64, linux/arm/v7]
+        pio_env: [native, native-tft]
+        exclude:
+          - distro: alpine
+            platform: linux/arm/v7
+          - pio_env: native-tft
+            platform: linux/arm64
+          - pio_env: native-tft
+            platform: linux/arm/v7
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: ${{ matrix.distro }}
+      platform: ${{ matrix.platform }}
+      runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
+      pio_env: ${{ matrix.pio_env }}
+      push: false
+
+  gather-artifacts:
+    # trunk-ignore(checkov/CKV2_GHA_1)
+    permissions:
+      contents: write
+      pull-requests: write
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+    runs-on: ubuntu-latest
+    needs: [version, build]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - uses: actions/download-artifact@v8
+        with:
+          path: ./
+          pattern: firmware-${{matrix.arch}}-*
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Move files up
+        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+
+      - name: Repackage in single firmware zip
+        uses: actions/upload-artifact@v7
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          overwrite: true
+          path: |
+            ./firmware-*.bin
+            ./firmware-*.uf2
+            ./firmware-*.hex
+            ./firmware-*.zip
+            ./device-*.sh
+            ./device-*.bat
+            ./littlefs-*.bin
+            ./bleota*bin
+            ./Meshtastic_nRF52_factory_erase*.uf2
+          retention-days: 30
+
+      - uses: actions/download-artifact@v8
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-update.sh || true
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - name: Repackage in single elfs zip
+        uses: actions/upload-artifact@v7
+        with:
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          overwrite: true
+          path: ./*.elf
+          retention-days: 30
+
+      - uses: scruplelesswizard/comment-artifact@main
+        if: ${{ github.event_name == 'pull_request' }}
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+
+  release-artifacts:
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    outputs:
+      upload_url: ${{ steps.create_release.outputs.upload_url }}
+    needs:
+      - version
+      - gather-artifacts
+      - build-debian-src
+      - package-pio-deps-native-tft
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+
+      - name: Create release
+        uses: softprops/action-gh-release@v2
+        id: create_release
+        with:
+          draft: true
+          prerelease: true
+          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
+          tag_name: v${{ needs.version.outputs.long }}
+          body: |
+            Autogenerated by github action, developer should edit as required before publishing...
+
+      - name: Download source deb
+        uses: actions/download-artifact@v8
+        with:
+          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
+          merge-multiple: true
+          path: ./output/debian-src
+
+      - name: Download `native-tft` pio deps
+        uses: actions/download-artifact@v8
+        with:
+          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output/pio-deps-native-tft
+
+      - name: Zip Linux sources
+        working-directory: output
+        run: |
+          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
+          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
+
+      # For diagnostics
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Add Linux sources to GtiHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
+        run: |
+          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
+          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+  release-firmware:
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-artifacts, version]
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+
+      - uses: actions/download-artifact@v8
+        with:
+          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-update.sh || true
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - uses: actions/download-artifact@v8
+        with:
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./elfs
+
+      - name: Zip debug elfs
+        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
+
+      # For diagnostics
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Add bins and debug elfs to GitHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
+        run: |
+          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+  publish-firmware:
+    runs-on: ubuntu-24.04
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-firmware, version]
+    env:
+      targets: |-
+        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v6
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+
+      - uses: actions/download-artifact@v8
+        with:
+          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./publish
+
+      - name: Publish firmware to meshtastic.github.io
+        uses: peaceiris/actions-gh-pages@v4
+        env:
+          # On event/* branches, use the event name as the destination prefix
+          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
+        with:
+          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
+          external_repository: meshtastic/meshtastic.github.io
+          publish_branch: master
+          publish_dir: ./publish
+          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
+          keep_files: true
+          user_name: github-actions[bot]
+          user_email: github-actions[bot]@users.noreply.github.com
+          commit_message: ${{ needs.version.outputs.long }}
+          enable_jekyll: true

.github/workflows/package_obs.yml

@@ -18,7 +18,8 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
+  packages: write
 
 jobs:
   build-debian-src:

.github/workflows/package_pio_deps.yml

@@ -16,7 +16,8 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
+  packages: write
 
 jobs:
   pkg-pio-libdeps:
@@ -26,6 +27,8 @@ jobs:
         uses: actions/checkout@v6
         with:
           submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Setup Python
         uses: actions/setup-python@v6

.github/workflows/package_ppa.yml

@@ -16,7 +16,8 @@ on:
         type: string
 
 permissions:
-  contents: read
+  contents: write
+  packages: write
 
 jobs:
   build-debian-src:
@@ -35,6 +36,8 @@ jobs:
         with:
           submodules: recursive
           path: meshtasticd
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Install deps
         shell: bash
@@ -67,6 +70,5 @@ jobs:
 
       - name: Publish with dput
         if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        timeout-minutes: 15 # dput is terrible, sometimes runs 'forever'
         run: |
           dput ${{ inputs.ppa_repo }} meshtasticd_${{ steps.version.outputs.deb }}~${{ inputs.series }}_source.changes

.github/workflows/test_native.yml

@@ -16,6 +16,8 @@ jobs:
     steps:
       - uses: actions/checkout@v6
         with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
           submodules: recursive
 
       - name: Setup native build
@@ -70,6 +72,8 @@ jobs:
     steps:
       - uses: actions/checkout@v6
         with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
           submodules: recursive
 
       - name: Setup native build
@@ -124,6 +128,9 @@ jobs:
     if: always()
     steps:
       - uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Get release version string
         run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -136,7 +143,7 @@ jobs:
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v3.0.0
+        uses: dorny/test-reporter@v2.6.0
         with:
           name: PlatformIO Tests
           path: testreport.xml

.github/workflows/tests.yml

@@ -52,7 +52,7 @@ jobs:
           node-version: 24
 
       - name: Setup pnpm
-        uses: pnpm/action-setup@v5
+        uses: pnpm/action-setup@v4
         with:
           version: latest
 

.github/workflows/update_protobufs.yml

@@ -6,7 +6,7 @@ permissions: read-all
 jobs:
   update-protobufs:
     runs-on: ubuntu-latest
-    permissions: # Needed for peter-evans/create-pull-request.
+    permissions:
       contents: write
       pull-requests: write
     steps:

.trunk/trunk.yaml

@@ -8,27 +8,27 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.513
-    - renovate@43.104.6
+    - checkov@3.2.508
+    - renovate@43.76.3
     - prettier@3.8.1
-    - trufflehog@3.94.2
+    - trufflehog@3.93.8
     - yamllint@1.38.0
     - bandit@1.9.4
     - trivy@0.69.3
     - taplo@0.10.0
-    - ruff@0.15.9
+    - ruff@0.15.6
     - isort@8.0.1
     - markdownlint@0.48.0
     - oxipng@10.1.0
     - svgo@4.0.1
-    - actionlint@1.7.12
+    - actionlint@1.7.11
     - flake8@7.3.0
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
     - black@26.3.1
     - git-diff-check
-    - gitleaks@8.30.1
+    - gitleaks@8.30.0
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

bin/config.d/OpenWRT/BananaPi-BPI-R4-sx1262.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: BananaPi-BPI-R4-sx1262
-  support: community
-  compatible:
-    - bananapi_bpi-r4 # OpenWrt target
-
 Lora:
   Module: sx1262  # BananaPi-BPI-R4 SPI via 26p GPIO Header
 ##  CS: 28

bin/config.d/OpenWRT/OpenWRT-One-mikroBUS-LR-IOT-CLICK.yaml

@@ -1,10 +1,4 @@
 ##  https://www.mikroe.com/lr-iot-click
-Meta:
-  name: OpenWRT One mikroBUS LR-IOT-CLICK
-  support: community
-  compatible:
-    - openwrt_one # OpenWrt target
-
 Lora:
   Module: lr1110  # OpenWRT ONE mikroBUS with LR-IOT-CLICK
 #  CS: 25

bin/config.d/OpenWRT/OpenWRT_One_mikroBUS_sx1262.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: OpenWRT One mikroBUS sx1262
-  support: community
-  compatible:
-    - openwrt_one # OpenWrt target
-
 Lora:
   Module: sx1262
   IRQ: 10

bin/config.d/README.md

@@ -1,28 +0,0 @@
-# meshtasticd configuration files
-
-This directory contains YAML configuration files for meshtasticd. Each file describes a specific hardware configuration, including the LoRa module and pin assignments. These configurations are used by meshtasticd to correctly interface with the hardware.
-
-## Metadata structure
-
-Each configuration file includes a `Meta` section that provides information about the configuration.
-This configuration is consumed by configuration-selection tools.
-
-```yaml
-Meta:
-  name: MeshAdv-Pi E22-900M30S # A unique identifier for this configuration.
-  support: community # community, official, or deprecated; determined by Meshtastic Leads.
-  compatible: # A list of compatible products or platforms.
-    - raspberry-pi
-```
-`name`: A unique identifier for the configuration, typically reflecting the hardware it supports.
-
-`support`: Indicates the level of support for this configuration. It can be one of the following:
-
-- `community`: Supported by the Meshtastic community. Meshtastic Members may not possess, or have not tested this configuration.
-- `official`: Fully supported by Meshtastic. Meshtastic Members have tested and verified this configuration.
-- `deprecated`: No longer recommended for deployment by Meshtastic.
-
-`compatible`: A list of compatible products or platforms that can use this configuration.
-This will vary depending on the intended use case / platform.
-Multiple compatible entries can be included. E.g. Armbian `BOARD` value or OpenWrt `TARGET` value.
-These tags can be consumed by different configuration-selection tools, filtering based upon their platform/etc.

bin/config.d/display-waveshare-1-44.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Waveshare 1.44inch LCD HAT
-  support: community
-  compatible:
-    - raspberry-pi
-
 ### Waveshare 1.44inch LCD HAT
 Display:
   Panel: ST7735S

bin/config.d/display-waveshare-2.8.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Waveshare 2.8inch LCD HAT
-  support: community
-  compatible:
-    - raspberry-pi
-
 Display:
 
 ### Waveshare 2.8inch RPi LCD

bin/config.d/femtofox/femtofox_E80-900M2213S.yaml

@@ -1,30 +0,0 @@
----
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-rfswitch_table:
-  pins: [DIO5, DIO6, DIO7]
-  MODE_STBY: [LOW, LOW, LOW]
-  MODE_RX: [LOW, HIGH, LOW]
-  MODE_TX: [HIGH, HIGH, LOW]
-  MODE_TX_HP: [HIGH, LOW, LOW]
-  MODE_TX_HF: [LOW, LOW, LOW]
-  MODE_GNSS: [LOW, LOW, HIGH]
-  MODE_WIFI: [LOW, LOW, LOW]
-
-General:
-  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_LR1121 generic.yaml

@@ -1,46 +0,0 @@
----
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-rfswitch_table:
-  pins:
-    - DIO5
-    - DIO6
-  MODE_STBY:
-    - LOW
-    - LOW
-  MODE_RX:
-    - HIGH
-    - LOW
-  MODE_TX:
-    - HIGH
-    - HIGH
-  MODE_TX_HP:
-    - LOW
-    - HIGH
-  MODE_TX_HF:
-    - LOW
-    - LOW
-  MODE_GNSS:
-    - LOW
-    - LOW
-  MODE_WIFI:
-    - LOW
-    - LOW
-
-General:
-  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_LR1121_TCXO.yaml

@@ -1,22 +1,20 @@
----
-Meta:
-  name: Femtofox Ebyte E80-900M22S with TCXO
-  support: community
-  compatible:
-    - luckfox-pico-mini # Armbian
-
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
+---
+Lora:
+## Ebyte E80-900M22S
+## This is a bit experimental
+## 
+##
+  Module: lr1121
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO3_TCXO_VOLTAGE: 1.8
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+
+
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+General:
+  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_SX1262_TCXO.yaml

@@ -1,24 +1,21 @@
----
-Meta:
-  name: Femtofox SX1262 TCXO
-  support: community
-  compatible:
-    - luckfox-pico-mini # Armbian
-
-Lora:
-## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
-## HT-RA62 (Has internal switching, but whatever)
-## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
-## Will work with any module with or without RF switching, and with TCXO
-  Module: sx1262
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
+---
+Lora:
+## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
+## HT-RA62 (Has internal switching, but whatever)
+## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
+## Will work with any module with or without RF switching, and with TCXO
+  Module: sx1262
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+#  TXen: bridge to DIO2 on E22 module
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+General:
+  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_SX1262_XTAL.yaml

@@ -1,24 +1,21 @@
----
-Meta:
-  name: Femtofox SX1262 XTAL
-  support: community
-  compatible:
-    - luckfox-pico-mini # Armbian
-
-Lora:
-## Ebyte E22-900MM22S with no external RF switching setup
-## Waveshare SX126X XXXM, AI Thinker RA-01SH
-## Will work with any module with or without RF switching and no TCXO
-
-  Module: sx1262  
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: false
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1 
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
+---
+Lora:
+## Ebyte E22-900MM22S with no external RF switching setup
+## Waveshare SX126X XXXM, AI Thinker RA-01SH
+## Will work with any module with or without RF switching and no TCXO
+
+  Module: sx1262  
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: false
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1 
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+#  TXen: bridge to DIO2 on E22 module
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+
+General:
+  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_WIO-LR1121.yaml

@@ -1,30 +0,0 @@
----
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-rfswitch_table:
-  pins: [DIO5, DIO6, DIO7]
-  MODE_STBY: [LOW, LOW, LOW]
-  MODE_RX: [LOW, LOW, LOW]
-  MODE_TX: [LOW, HIGH, LOW]
-  MODE_TX_HP: [HIGH, LOW, LOW]
-  # MODE_TX_HF: []
-  # MODE_GNSS: []
-  MODE_WIFI: [LOW, LOW, LOW]
-
-General:
-  MACAddressSource: eth0

bin/config.d/lora-Adafruit-RFM9x.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Adafruit RFM9x
-  support: deprecated
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: RF95  # Adafruit RFM9x
   Reset: 25

bin/config.d/lora-MeshAdv-900M30S.yaml

@@ -1,11 +1,5 @@
 # MeshAdv-Pi E22-900M30S
 # https://github.com/chrismyers2000/MeshAdv-Pi-Hat
-Meta:
-  name: MeshAdv-Pi E22-900M30S
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: sx1262
   CS: 21

bin/config.d/lora-MeshAdv-Mini-900M22S.yaml

@@ -1,11 +1,5 @@
 # MeshAdv Mini E22-900M22S
 # https://github.com/chrismyers2000/MeshAdv-Mini
-Meta:
-  name: MeshAdv Mini E22-900M22S
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: sx1262  # Ebyte E22-900M22S 
   CS: 8

bin/config.d/lora-RAK6421-13300-slot1.yaml

@@ -1,12 +1,6 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1
-  support: official
-  compatible:
-    - raspberry-pi
-
 Lora:
 
-  ### RAK13300 in Slot 1
+  ### RAK13300in Slot 1
   Module: sx1262
   IRQ: 22 #IO6
   Reset: 16 # IO4

bin/config.d/lora-RAK6421-13300-slot2.yaml

@@ -1,11 +1,5 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 2
-  support: official
-  compatible:
-    - raspberry-pi
-
 Lora:
-  ### RAK13300 in Slot 2 pins
+  ### RAK13300in Slot 2 pins
   IRQ: 18 #IO6
   Reset: 24 # IO4
   Busy: 19 # IO5

bin/config.d/lora-RAK6421-13302-slot1.yaml

@@ -1,12 +1,6 @@
-Meta:
-  name: RAK6421 + RAK13302 Slot 1
-  support: official
-  compatible:
-    - raspberry-pi
-
 Lora:
 
-  ### RAK13302 in Slot 1
+  ### RAK13300in Slot 1
   Module: sx1262
   IRQ: 22 #IO6
   Reset: 16 # IO4

bin/config.d/lora-RAK6421-13302-slot2.yaml

@@ -1,11 +1,5 @@
-Meta:
-  name: RAK6421 + RAK13302 Slot 2
-  support: official
-  compatible:
-    - raspberry-pi
-
 Lora:
-  ### RAK13302 in Slot 2 pins
+  ### RAK13300in Slot 2 pins
   IRQ: 18 #IO6
   Reset: 24 # IO4
   Busy: 19 # IO5

bin/config.d/lora-hat-rak-6421-pi-hat.yaml

@@ -1,12 +1,6 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1 (Autoconf default)
-  support: official
-  compatible:
-    - raspberry-pi
-
 Lora:
 
-  ### RAK13300 in Slot 1
+  ### RAK13300in Slot 1
   Module: sx1262
   IRQ: 22 #IO6
   Reset: 16 # IO4

bin/config.d/lora-lyra-picocalc-wio-sx1262.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Luckfox Lyra PicoCalc Wio LoRa SX1262
-  support: official
-  compatible:
-    - luckfox-lyra-plus # Armbian
-
 Lora:
   Module: sx1262
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-lyra-ultra_1w.yaml

@@ -2,13 +2,6 @@
 # Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
 # https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
 # 1 Watt Lyra Ultra hat
-Meta:
-  name: wehooper4 Luckfox Ultra 1W
-  support: community
-  compatible:
-    - luckfox-pico-ultra # Armbian
-    - luckfox-lyra-ultra # Armbian
-
 Lora:
   Module: sx1262
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-lyra-ultra_2w.yaml

@@ -2,13 +2,6 @@
 # Enable overlay 'luckfox-lyra-ultra-w-spi0-cs0-spidev' with armbian-config
 # https://github.com/wehooper4/Meshtastic-Hardware/tree/main/Luckfox%20Ultra%20Hat
 # 2 Watt Lyra Ultra hat
-Meta:
-  name: wehooper4 Luckfox Ultra 2W
-  support: community
-  compatible:
-    - luckfox-pico-ultra # Armbian
-    - luckfox-lyra-ultra # Armbian
-
 Lora:
   Module: sx1262
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-lyra-ws-raspberry-pi-pico-hat.yaml

@@ -2,12 +2,6 @@
 # Enable overlay 'luckfox-lyra-plus-spi0-cs0_rmio13-spidev' with armbian-config
 # Waveshare LoRa HAT for Raspberry Pi Pico
 # https://www.waveshare.com/wiki/Pico-LoRa-SX1262
-Meta:
-  name: Waveshare LoRa HAT for Raspberry Pi Pico
-  support: community
-  compatible:
-    - luckfox-lyra-plus # Armbian
-
 Lora:
   Module: sx1262
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-lyra-zero-MeshAdv-900M30S.yaml

@@ -1,39 +0,0 @@
-# MeshAdv-Pi E22-900M30S
-# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
-Meta:
-  name: MeshAdv-Pi E22-900M30S
-  support: community
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262
-  CS: # GPIO0_C2 (physical 40)
-    pin: 18
-    gpiochip: 0
-    line: 18
-  IRQ: # GPIO1_D1 (physical 36)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  Busy: # GPIO0_C1 (physical 38)
-    pin: 17
-    gpiochip: 0
-    line: 17
-  Reset: # GPIO0_B6 (physical 12)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  TXen: # GPIO1_C2 (physical 33)
-    pin: 50
-    gpiochip: 1
-    line: 18
-  RXen: # GPIO1_D2 (physical 32)
-    pin: 58
-    gpiochip: 1
-    line: 26
-  DIO3_TCXO_VOLTAGE: true
-  # Only for E22-900M33S:
-  # Limit the output power to 8 dBm
-  # SX126X_MAX_POWER: 8
-  spidev: spidev0.0

bin/config.d/lora-lyra-zero-MeshAdv-Mini-900M22S.yaml

@@ -1,33 +0,0 @@
-# MeshAdv Mini E22-900M22S
-# https://github.com/chrismyers2000/MeshAdv-Mini
-Meta:
-  name: MeshAdv Mini E22-900M22S
-  support: community
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262 # Ebyte E22-900M22S
-  CS: # GPIO0_B2_d (phys 24, RPi CE0)
-    pin: 10
-    gpiochip: 0
-    line: 10
-  IRQ: # GPIO1_D1_d (phys 36, RPi GPIO16)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  Busy: # GPIO0_C1_d (phys 38, RPi GPIO20)
-    pin: 17
-    gpiochip: 0
-    line: 17
-  Reset: # GPIO0_B4_d (phys 18, RPi GPIO24)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  RXen: # GPIO1_D2_d (phys 32, RPi GPIO12)
-    pin: 58
-    gpiochip: 1
-    line: 26
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  spidev: spidev0.0

bin/config.d/lora-lyra-zero-RAK6421-13300-slot1.yaml

@@ -1,38 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1
-  support: community # Promote when tested
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_A5 (IO6)
-    pin: 5
-    gpiochip: 0
-    line: 5
-  Reset: # GPIO1_D1 (IO4)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  Busy: # GPIO0_B4 (IO5)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  # Ant_sw: # GPIO1_C2 (IO3)
-  #   pin: 50
-  #   gpiochip: 1
-  #   line: 18
-  Enable_Pins:
-    - pin: 58 # GPIO1_D2
-      gpiochip: 1
-      line: 26
-    - pin: 50 # GPIO1_C2
-      gpiochip: 1
-      line: 18
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: # GPIO0_B2
-  #   pin: 10
-  #   gpiochip: 0
-  #   line: 10

bin/config.d/lora-lyra-zero-RAK6421-13300-slot2.yaml

@@ -1,36 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 2
-  support: community # Promote when tested
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_B6 (IO6)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  Reset: # GPIO0_B4 (IO4)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  Busy: # GPIO1_C0 (IO5)
-    pin: 48
-    gpiochip: 1
-    line: 16
-  # Ant_sw: # GPIO0_B5 (IO3)
-  #   pin: 13
-  #   gpiochip: 0
-  #   line: 13
-  Enable_Pins:
-    - pin: 51 # GPIO1_C3
-      gpiochip: 1
-      line: 19
-    - pin: 13 # GPIO0_B5
-      gpiochip: 0
-      line: 13
-  spidev: spidev0.1
-  # CS: # GPIO0_B1
-  #   pin: 9
-  #   gpiochip: 0
-  #   line: 9

bin/config.d/lora-lyra-zero-RAK6421-13302-slot1.yaml

@@ -1,39 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 1
-  support: community # Promote when tested
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_A5 (IO6)
-    pin: 5
-    gpiochip: 0
-    line: 5
-  Reset: # GPIO1_D1 (IO4)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  Busy: # GPIO0_B4 (IO5)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  # Ant_sw: # GPIO1_C2 (IO3)
-  #   pin: 50
-  #   gpiochip: 1
-  #   line: 18
-  Enable_Pins:
-    - pin: 58 # GPIO1_D2
-      gpiochip: 1
-      line: 26
-    - pin: 50 # GPIO1_C2
-      gpiochip: 1
-      line: 18
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0
-  # CS: # GPIO0_B2
-  #   pin: 10
-  #   gpiochip: 0
-  #   line: 10
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-lyra-zero-RAK6421-13302-slot2.yaml

@@ -1,37 +0,0 @@
-Meta:
-  name: RAK6421 + RAK13300 Slot 2
-  support: community # Promote when tested
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262
-  IRQ: # GPIO0_B6 (IO6)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  Reset: # GPIO0_B4 (IO4)
-    pin: 12
-    gpiochip: 0
-    line: 12
-  Busy: # GPIO1_C0 (IO5)
-    pin: 48
-    gpiochip: 1
-    line: 16
-  # Ant_sw: # GPIO0_B5 (IO3)
-  #   pin: 13
-  #   gpiochip: 0
-  #   line: 13
-  Enable_Pins:
-    - pin: 51 # GPIO1_C3
-      gpiochip: 1
-      line: 19
-    - pin: 13 # GPIO0_B5
-      gpiochip: 0
-      line: 13
-  spidev: spidev0.1
-  # CS: # GPIO0_B1
-  #   pin: 9
-  #   gpiochip: 0
-  #   line: 9
-  TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]

bin/config.d/lora-lyra-zero-waveshare-sxxx.yaml

@@ -1,30 +0,0 @@
-Meta:
-  name: Waveshare SX1262
-  support: deprecated
-  compatible:
-    - luckfox-lyra-zero-w # Armbian
-
-Lora:
-  Module: sx1262  # Waveshare SX126X XXXM
-  DIO2_AS_RF_SWITCH: true
-  CS: # GPIO0_C2 (physical 40)
-    pin: 18
-    gpiochip: 0
-    line: 18
-  IRQ: # GPIO1_D1 (physical 36)
-    pin: 57
-    gpiochip: 1
-    line: 25
-  Busy: # GPIO0_C1 (physical 38)
-    pin: 17
-    gpiochip: 0
-    line: 17
-  Reset: # GPIO0_B6 (physical 12)
-    pin: 14
-    gpiochip: 0
-    line: 14
-  SX126X_ANT_SW: # GPIO1_B3 (physical 31)
-    pin: 43
-    gpiochip: 1
-    line: 11
-  spidev: spidev0.0

bin/config.d/lora-meshstick-1262.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Lora Meshstick SX1262
-  support: official
-  compatible:
-    - usb
-
 Lora:
   Module: sx1262
   CS: 0

bin/config.d/lora-piggystick-lr1121.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Lora Meshstick SX1262
-  support: community
-  compatible:
-    - usb
-
 Lora:
   Module: lr1121
   CS: 0

bin/config.d/lora-pinedio-usb-sx1262.yaml

@@ -1,11 +1,5 @@
-Meta:
-  name: Pinedio USB SX1262
-  support: deprecated
-  compatible:
-    - usb
-
 Lora:
   Module: sx1262
   CS: 0 
   IRQ: 10
-  spidev: ch341
+  spidev: ch341

bin/config.d/lora-raxda-rock2f-starter-edition-hat.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: raxda-rock2f-starter-edition-hat
-  support: community
-  compatible:
-    - rock-2f # Armbian
-
 Lora:
 
 ### Raxda Rock 2F running Armbian Linux 6.1.99-vendor-rk35xx

bin/config.d/lora-starter-edition-sx1262-i2c.yaml

@@ -1,11 +1,5 @@
 # https://www.waveshare.com/core1262-868m.htm
 # https://github.com/markbirss/lora-starter-edition-sx1262-i2c
-Meta:
-  name: lora-starter-edition-sx1262-i2c
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: sx1262  # Starter Edition SX1262 I2C Raspberry Pi HAT
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-usb-meshstick-1262.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: meshstick-1262
-  support: official
-  compatible:
-    - usb
-
 Lora:
   Module: sx1262
   CS: 0

bin/config.d/lora-usb-meshtoad-e22.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: meshtoad-e22
-  support: official
-  compatible:
-    - usb
-
 Lora:
   Module: sx1262
   CS: 0

bin/config.d/lora-usb-umesh-1262-30dbm.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: umesh-1262-30dbm
-  support: community
-  compatible:
-    - clockwork-uconsole
-
 Lora:
   Module: sx1262
   CS: 0

bin/config.d/lora-usb-umesh-1268-30dbm.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: umesh-1268-30dbm
-  support: community
-  compatible:
-    - clockwork-uconsole
-
 Lora:
   Module: sx1268
   CS: 0

bin/config.d/lora-waveshare-sxxx.yaml

@@ -1,9 +1,3 @@
-Meta:
-  name: Waveshare SX1262
-  support: deprecated
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: sx1262  # Waveshare SX126X XXXM
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-ws-raspberry-pi-pico-to-rpi-adapter.yaml

@@ -1,12 +1,5 @@
 # https://www.waveshare.com/pico-lora-sx1262-868m.htm
 # https://github.com/markbirss/lora-ws-raspberry-pi-pico-to-rpi-adapter
-
-Meta:
-  name: ws-raspberry-pico-to-rpi-adapter
-  support: community
-  compatible:
-    - raspberry-pi
-
 Lora:
   Module: sx1262  # Waveshare Raspberry Pi Pico to Raspberry Pi HAT Adapter
   DIO2_AS_RF_SWITCH: true

bin/config.d/lora-ws-raspberry-pico-to-orangepi-03.yaml

@@ -15,12 +15,6 @@
 #   5     CS          24
 #   26    DIO1/IRQ    26
 
-Meta:
-  name: ws-raspberry-pico-to-orangepi-03
-  support: community
-  compatible:
-    - orange-pi-zero-3 # Armbian
-
 Lora:
   Module: sx1262  # Waveshare Raspberry Pico Lora module
   DIO2_AS_RF_SWITCH: true

bin/generate_ci_matrix.py

@@ -43,7 +43,7 @@ for pio_env in pio_envs:
   env = {
     "ci": {"board": pio_env, "platform": env_platform},
     "board_level": cfg.get(f"env:{pio_env}", "board_level", default=None),
-    "board_check": cfg.get(f"env:{pio_env}", "board_check", default="false").strip().lower() == "true",
+    "board_check": bool(cfg.get(f"env:{pio_env}", "board_check", default=False)),
   }
   all_envs.append(env)
 

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,9 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.22" date="2026-04-06">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.22</url>
-    </release>
     <release version="2.7.21" date="2026-03-11">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.21</url>
     </release>

boards/t5-epaper-s3.json

@@ -1,38 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi",
-      "partitions": "default_16MB.csv"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=0",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "LilyGo T5-ePaper-S3",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 16777216,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://lilygo.cc/products/t5-e-paper-s3-pro",
-  "vendor": "LILYGO"
-}

boards/tracker-t2000-c.json

@@ -1,30 +1,30 @@
 {
   "build": {
     "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
+      "ldscript": "nrf52840_s140_v7.ld"
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52840_XXAA",
+    "extra_flags": "-DARDUINO_TRACKER_T2000_C -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
-      ["0x239A", "0x4405"],
+      ["0x239A", "0x8029"],
       ["0x239A", "0x0029"],
       ["0x239A", "0x002A"],
-      ["0x2886", "0x1667"]
+      ["0x239A", "0x802A"],
+      ["0x2886", "0x0057"]
     ],
-    "usb_product": "HT-n5262G",
+    "usb_product": "T2000-BOOT",
     "mcu": "nrf52840",
-    "variant": "heltec_mesh_node_t096",
-    "variants_dir": "variants",
+    "variant": "Seeed_T2000-C",
     "bsp": {
       "name": "adafruit"
     },
     "softdevice": {
       "sd_flags": "-DS140",
       "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
     },
     "bootloader": {
       "settings_addr": "0xFF000"
@@ -33,22 +33,28 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
     "svd_path": "nrf52840.svd",
     "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
-  "name": "Heltec nrf (Adafruit BSP)",
+  "name": "Seeed T2000-C",
   "upload": {
     "maximum_ram_size": 248832,
     "maximum_size": 815104,
     "speed": 115200,
     "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
     "use_1200bps_touch": true,
     "require_upload_port": true,
     "wait_for_upload_port": true
   },
-  "url": "https://heltec.org/",
-  "vendor": "Heltec"
+  "url": "https://www.seeedstudio.com/",
+  "vendor": "Seeed Studio"
 }

boards/ttgo-tbeam.json

@@ -1,29 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32_out.ld"
-    },
-    "core": "esp32",
-    "extra_flags": "-DARDUINO_T_Beam",
-    "f_cpu": "240000000L",
-    "f_flash": "40000000L",
-    "flash_mode": "dio",
-    "mcu": "esp32",
-    "variant": "tbeam"
-  },
-  "connectivity": ["wifi", "bluetooth", "can", "ethernet"],
-  "debug": {
-    "openocd_board": "esp-wroom-32.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "TTGO T-Beam (PSRAM Disabled)",
-  "upload": {
-    "flash_size": "4MB",
-    "maximum_ram_size": 1310720,
-    "maximum_size": 4194304,
-    "require_upload_port": true,
-    "speed": 460800
-  },
-  "url": "https://github.com/LilyGO/TTGO-T-Beam",
-  "vendor": "TTGO"
-}

debian/changelog

@@ -1,9 +1,3 @@
-meshtasticd (2.7.22.0) unstable; urgency=medium
-
-  * Version 2.7.22
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Mon, 06 Apr 2026 11:34:12 +0000
-
 meshtasticd (2.7.21.0) unstable; urgency=medium
 
   * Version 2.7.21

debian/ci_pack_sdeb.sh

@@ -27,10 +27,5 @@ rm -rf debian/changelog
 dch --create --distribution "$SERIES" --package "$package" --newversion "$PKG_VERSION~$SERIES" \
 	"GitHub Actions Automatic packaging for $PKG_VERSION~$SERIES"
 
-if [[ -n $GPG_KEY_ID ]]; then
-	# Build and sign the source deb
-	debuild -S -nc -k"$GPG_KEY_ID"
-else
-	# Build the source deb without signing (forks)
-	debuild -S -nc
-fi
+# Build the source deb
+debuild -S -nc -k"$GPG_KEY_ID"

platformio.ini

@@ -50,7 +50,6 @@ build_flags = -Wno-missing-field-initializers
 	-DRADIOLIB_EXCLUDE_APRS=1
 	-DRADIOLIB_EXCLUDE_LORAWAN=1
 	-DMESHTASTIC_EXCLUDE_DROPZONE=1
-	-DMESHTASTIC_EXCLUDE_ZPS=1
 	-DMESHTASTIC_EXCLUDE_REPLYBOT=1
 	-DMESHTASTIC_EXCLUDE_REMOTEHARDWARE=1
 	-DMESHTASTIC_EXCLUDE_HEALTH_TELEMETRY=1
@@ -78,10 +77,10 @@ lib_deps =
 	https://github.com/meshtastic/TinyGPSPlus/archive/71a82db35f3b973440044c476d4bcdc673b104f4.zip
 	# renovate: datasource=git-refs depName=meshtastic-ArduinoThread packageName=https://github.com/meshtastic/ArduinoThread gitBranch=master
 	https://github.com/meshtastic/ArduinoThread/archive/b841b0415721f1341ea41cccfb4adccfaf951567.zip
-	# renovate: datasource=github-tags depName=Nanopb packageName=nanopb/nanopb
-	https://github.com/nanopb/nanopb/archive/refs/tags/nanopb-0.4.9.1.zip
-	# renovate: datasource=github-tags depName=ErriezCRC32 packageName=Erriez/ErriezCRC32
-	https://github.com/Erriez/ErriezCRC32/archive/refs/tags/1.0.1.zip
+	# renovate: datasource=custom.pio depName=Nanopb packageName=nanopb/library/Nanopb
+	nanopb/Nanopb@0.4.91
+	# renovate: datasource=custom.pio depName=ErriezCRC32 packageName=erriez/library/ErriezCRC32
+	erriez/ErriezCRC32@1.0.1
 
 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck
@@ -96,8 +95,8 @@ check_flags =
 framework = arduino
 lib_deps =
 	${env.lib_deps}
-	# renovate: datasource=github-tags depName=NonBlockingRTTTL packageName=end2endzone/NonBlockingRTTTL
-	https://github.com/end2endzone/NonBlockingRTTTL/archive/refs/tags/1.4.0.zip
+	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=end2endzone/library/NonBlockingRTTTL
+	end2endzone/NonBlockingRTTTL@1.4.0
 build_unflags =
 	-std=c++11
 	-std=gnu++11
@@ -108,26 +107,26 @@ build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/nic
 ; Common libs for communicating over TCP/IP networks such as MQTT
 [networking_base]
 lib_deps =
-	# renovate: datasource=github-tags depName=TBPubSubClient packageName=thingsboard/pubsubclient
-	https://github.com/thingsboard/pubsubclient/archive/refs/tags/v2.12.1.zip
-	# renovate: datasource=github-tags depName=NTPClient packageName=arduino-libraries/NTPClient
-	https://github.com/arduino-libraries/NTPClient/archive/refs/tags/3.2.1.zip
+	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
+	thingsboard/TBPubSubClient@2.12.1
+	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
+	arduino-libraries/NTPClient@3.2.1
 
 ; Extra TCP/IP networking libs for supported devices
 [networking_extra]
 lib_deps =
-	# renovate: datasource=github-tags depName=Syslog packageName=arcao/Syslog
-	https://github.com/arcao/Syslog/archive/refs/tags/v2.0.zip
+	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
+	arcao/Syslog@2.0.0
 
 [radiolib_base]
 lib_deps =
-	# renovate: datasource=github-tags depName=RadioLib packageName=jgromes/RadioLib
-	https://github.com/jgromes/RadioLib/archive/refs/tags/7.6.0.zip
+	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
+	jgromes/RadioLib@7.6.0
 
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/1897dd17fceb1f101bb1a3245680aa3439edcfdd.zip
+	https://github.com/meshtastic/device-ui/archive/622b034d8791153de9d16a473723cb8625d35839.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -196,10 +195,16 @@ lib_deps =
 	adafruit/Adafruit BMP3XX Library@2.1.6
 	# renovate: datasource=custom.pio depName=Adafruit MAX1704X packageName=adafruit/library/Adafruit MAX1704X
 	adafruit/Adafruit MAX1704X@1.0.3
+	# renovate: datasource=custom.pio depName=Adafruit SHTC3 packageName=adafruit/library/Adafruit SHTC3 Library
+	adafruit/Adafruit SHTC3 Library@1.0.2
 	# renovate: datasource=custom.pio depName=Adafruit LPS2X packageName=adafruit/library/Adafruit LPS2X
 	adafruit/Adafruit LPS2X@2.0.6
+	# renovate: datasource=custom.pio depName=Adafruit SHT31 packageName=adafruit/library/Adafruit SHT31 Library
+	adafruit/Adafruit SHT31 Library@2.2.2
 	# renovate: datasource=custom.pio depName=Adafruit VEML7700 packageName=adafruit/library/Adafruit VEML7700 Library
 	adafruit/Adafruit VEML7700 Library@2.1.6
+	# renovate: datasource=custom.pio depName=Adafruit SHT4x packageName=adafruit/library/Adafruit SHT4x Library
+	adafruit/Adafruit SHT4x Library@1.0.5
 	# renovate: datasource=custom.pio depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/library/SparkFun Qwiic Scale NAU7802 Arduino Library
 	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
 	# renovate: datasource=custom.pio depName=ClosedCube OPT3001 packageName=closedcube/library/ClosedCube OPT3001
@@ -214,8 +219,6 @@ lib_deps =
 	sensirion/Sensirion I2C SFA3x@1.0.0
 	# renovate: datasource=custom.pio depName=Sensirion I2C SCD30 packageName=sensirion/library/Sensirion I2C SCD30
 	sensirion/Sensirion I2C SCD30@1.0.0
-	# renovate: datasource=custom.pio depName=arduino-sht packageName=sensirion/library/arduino-sht
-	sensirion/arduino-sht@1.2.6
 
 ; Environmental sensors with BSEC2 (Bosch proprietary IAQ)
 [environmental_extra]
@@ -230,5 +233,5 @@ lib_deps =
 [environmental_extra_no_bsec]
 lib_deps =
 	${environmental_extra_common.lib_deps}
-	# renovate: datasource=custom.pio depName=Adafruit_BME680 packageName=adafruit/library/Adafruit BME680 Library
-	adafruit/Adafruit BME680 Library@2.0.6
+	# renovate: datasource=custom.pio depName=adafruit/Adafruit BME680 Library packageName=adafruit/library/Adafruit BME680
+	adafruit/Adafruit BME680 Library@^2.0.5

renovate.json

@@ -4,8 +4,6 @@
     ":dependencyDashboard",
     ":semanticCommitTypeAll(chore)",
     ":ignoreModulesAndTests",
-    ":noUnscheduledUpdates",
-    "schedule:daily",
     "group:recommended",
     "replacements:all",
     "workarounds:all"

src/DebugConfiguration.cpp

@@ -98,6 +98,7 @@ Syslog &Syslog::logMask(uint8_t priMask)
 
 void Syslog::enable()
 {
+    this->_client->begin(this->_port);
     this->_enabled = true;
 }
 
@@ -165,21 +166,14 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
     if ((pri & LOG_FACMASK) == 0)
         pri = LOG_MAKEPRI(LOG_FAC(this->_priDefault), pri);
 
-    // W5100S: acquire UDP socket on-demand to avoid permanent socket consumption
-    if (!this->_client->begin(this->_port)) {
-        return false;
-    }
-
     if (this->_server != NULL) {
         result = this->_client->beginPacket(this->_server, this->_port);
     } else {
         result = this->_client->beginPacket(this->_ip, this->_port);
     }
 
-    if (result != 1) {
-        this->_client->stop();
+    if (result != 1)
         return false;
-    }
 
     this->_client->print('<');
     this->_client->print(pri);
@@ -199,8 +193,6 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
     this->_client->print(message);
     this->_client->endPacket();
 
-    this->_client->stop(); // W5100S: release UDP socket for other services
-
     return true;
 }
 

src/DisplayFormatters.cpp

@@ -4,8 +4,7 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
                                                          bool usePreset)
 {
 
-    // If use_preset is false, always return "Custom" — callers such as RadioInterface and Channels
-    // rely on this being a stable literal for channel-name hashing and default-channel detection.
+    // If use_preset is false, always return "Custom"
     if (!usePreset) {
         return "Custom";
     }

src/Power.cpp

@@ -35,11 +35,6 @@
 #include "nrfx_power.h"
 #endif
 
-#if defined(ARCH_NRF52)
-#include "Nrf52SaadcLock.h"
-#include "concurrency/LockGuard.h"
-#endif
-
 #if defined(DEBUG_HEAP_MQTT) && !MESHTASTIC_EXCLUDE_MQTT
 #include "mqtt/MQTT.h"
 #include "target_specific.h"
@@ -333,9 +328,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
             scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
             scaled *= operativeAdcMultiplier;
 #else // block for all other platforms
-#ifdef ARCH_NRF52
-            concurrency::LockGuard saadcGuard(concurrency::nrf52SaadcLock);
-#endif
             for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
                 raw += analogRead(BATTERY_PIN);
             }

src/RedirectablePrint.cpp

@@ -137,7 +137,7 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
         if (color) {
             ::printf("\u001b[0m");
         }
-        ::printf("| %02d:%02d:%02d %u.%03u ", hour, min, sec, millis() / 1000, millis() % 1000);
+        ::printf("| %02d:%02d:%02d %u ", hour, min, sec, millis() / 1000);
 #else
         printf("%s ", logLevel);
         if (color) {
@@ -151,7 +151,7 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
         if (color) {
             ::printf("\u001b[0m");
         }
-        ::printf("| ??:??:?? %u.%03u ", millis() / 1000, millis() % 1000);
+        ::printf("| ??:??:?? %u ", millis() / 1000);
 #else
         printf("%s ", logLevel);
         if (color) {

src/buzz/buzz.cpp

@@ -6,11 +6,6 @@
 #include "Tone.h"
 #endif
 
-#if defined(HAS_I2S)
-#include "main.h"
-#include <unordered_map>
-#endif
-
 #if !defined(ARCH_PORTDUINO)
 extern "C" void delay(uint32_t dwMs);
 #endif
@@ -55,50 +50,6 @@ const int DURATION_1_2 = 500;  // 1/2 note
 const int DURATION_3_4 = 750;  // 3/4 note
 const int DURATION_1_1 = 1000; // 1/1 note
 
-#ifdef HAS_I2S
-void playTonesRTTTL(const ToneDuration *tone_durations, int size)
-{
-    // translate ToneDuration[] to RTTTL string and play using audioThread
-    static std::unordered_map<int, std::string> freqToNote = {
-        {NOTE_C3, "c4"},   {NOTE_CS3, "c#4"}, {NOTE_D3, "d4"},   {NOTE_DS3, "d#4"}, {NOTE_E3, "e4"},   {NOTE_F3, "f4"},
-        {NOTE_FS3, "f#4"}, {NOTE_G3, "g4"},   {NOTE_GS3, "g#4"}, {NOTE_A3, "a4"},   {NOTE_AS3, "a#4"}, {NOTE_B3, "b4"},
-        {NOTE_C4, "c5"},   {NOTE_E4, "e5"},   {NOTE_G4, "g5"},   {NOTE_A4, "a5"},   {NOTE_C5, "c6"},   {NOTE_E5, "e6"},
-        {NOTE_G5, "g6"},   {NOTE_F5, "f6"},   {NOTE_G6, "g7"},   {NOTE_E7, "e8"}};
-
-    char rtttl[128] = "tone:d=32,o=4,b=200:"; // default duration and octave
-    for (int i = 0; i < size; i++) {
-        const auto &td = tone_durations[i];
-        std::string note = "b4";
-        if (freqToNote.find(td.frequency_khz) != freqToNote.end()) {
-            note = freqToNote[td.frequency_khz];
-        }
-        int dur = 32; // default duration
-        if (td.duration_ms >= 1000)
-            dur = 1;
-        else if (td.duration_ms >= 500)
-            dur = 2;
-        else if (td.duration_ms >= 250)
-            dur = 4;
-        else if (td.duration_ms >= 125)
-            dur = 8;
-        else if (td.duration_ms >= 62)
-            dur = 16;
-        else
-            dur = 32;
-
-        char noteStr[64];
-        snprintf(noteStr, sizeof(noteStr), "%s,%d", note.c_str(), dur);
-        strncat(rtttl, noteStr, sizeof(rtttl) - strlen(rtttl) - 1);
-
-        audioThread->beginRttl(rtttl, strlen(rtttl));
-        while (audioThread->isPlaying()) {
-            delay(10);
-        }
-        return;
-    }
-}
-#endif
-
 void playTones(const ToneDuration *tone_durations, int size)
 {
     if (config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_DISABLED ||
@@ -106,13 +57,7 @@ void playTones(const ToneDuration *tone_durations, int size)
         // Buzzer is disabled or not set to system tones
         return;
     }
-#ifdef HAS_I2S
-    if (moduleConfig.external_notification.use_i2s_as_buzzer && audioThread) {
-        playTonesRTTTL(tone_durations, size);
-        return;
-    }
-#endif
-#if defined(PIN_BUZZER)
+#ifdef PIN_BUZZER
     if (!config.device.buzzer_gpio)
         config.device.buzzer_gpio = PIN_BUZZER;
 #endif

src/configuration.h

@@ -156,19 +156,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifdef USE_KCT8103L_PA
 // Power Amps are often non-linear, so we can use an array of values for the power curve
-#if defined(HELTEC_WIRELESS_TRACKER_V2)
 #define NUM_PA_POINTS 22
 #define TX_GAIN_LORA 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 13, 13, 13, 12, 12, 11, 10, 9, 8, 7
-#elif defined(HELTEC_MESH_NODE_T096)
-#define NUM_PA_POINTS 22
-#define TX_GAIN_LORA 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 13, 13, 13, 12, 11, 10, 9, 8, 7
-#else
-// If a board enables USE_KCT8103L_PA but does not match a known variant and has
-// not already provided a PA curve, fail at compile time to avoid unsafe defaults.
-#if !defined(NUM_PA_POINTS) || !defined(TX_GAIN_LORA)
-#error "USE_KCT8103L_PA is defined, but no PA gain curve (NUM_PA_POINTS / TX_GAIN_LORA) is configured for this board."
-#endif
-#endif
 #endif
 
 #ifdef RAK13302
@@ -231,7 +220,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BME_ADDR 0x76
 #define BME_ADDR_ALTERNATE 0x77
 #define MCP9808_ADDR 0x18
-#define INA_ADDR 0x40 // same as SHT2X
+#define INA_ADDR 0x40
 #define INA_ADDR_ALTERNATE 0x41
 #define INA_ADDR_WAVESHARE_UPS 0x43
 #define INA3221_ADDR 0x42
@@ -244,8 +233,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LPS22HB_ADDR 0x5C
 #define LPS22HB_ADDR_ALT 0x5D
 #define SFA30_ADDR 0x5D
-#define SHTXX_ADDR 0x44
-#define SHTXX_ADDR_ALT 0x45
+#define SHT31_4x_ADDR 0x44
+#define SHT31_4x_ADDR_ALT 0x45
 #define PMSA003I_ADDR 0x12
 #define QMA6100P_ADDR 0x12
 #define AHT10_ADDR 0x38

src/detect/ScanI2C.cpp

@@ -37,8 +37,9 @@ ScanI2C::FoundDevice ScanI2C::firstKeyboard() const
 
 ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const
 {
-    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3, BMX160, STK8BAXX, ICM20948, QMA6100P, BMM150, BMI270};
-    return firstOfOrNONE(10, types);
+    ScanI2C::DeviceType types[] = {MPU6050,  LIS3DH,   BMA423,   LSM6DS3, LSM6DSOX, BMX160,
+                                   STK8BAXX, ICM20948, QMA6100P, BMM150,  BMI270};
+    return firstOfOrNONE(11, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::firstAQI() const

src/detect/ScanI2C.h

@@ -31,6 +31,9 @@ class ScanI2C
         INA3221,
         MAX17048,
         MCP9808,
+        SHT31,
+        SHT4X,
+        SHTC3,
         LPS22HB,
         QMC6310U,
         QMC6310N,
@@ -44,6 +47,7 @@ class ScanI2C
         BMA423,
         BQ24295,
         LSM6DS3,
+        LSM6DSOX,
         TCA9535,
         TCA9555,
         VEML7700,
@@ -91,8 +95,7 @@ class ScanI2C
         SFA30,
         CW2015,
         SCD30,
-        ADS1115,
-        SHTXX
+        ADS1115
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -136,9 +136,7 @@ bool ScanI2CTwoWire::i2cCommandResponseLength(ScanI2C::DeviceAddress addr, uint1
     return match;
 }
 
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_AIR_QUALITY_SENSOR
-// FIXME Move to a separate file for detection of sensors that require more complex interactions?
-// For SEN5X detection
+/// for SEN5X detection
 // Note, this code needs to be called before setting the I2C bus speed
 // for the screen at high speed. The speed needs to be at 100kHz, otherwise
 // detection will not work
@@ -176,46 +174,6 @@ String readSEN5xProductName(TwoWire *i2cBus, uint8_t address)
 
     return String(productName);
 }
-#endif
-
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
-bool detectSHT21SerialNumber(TwoWire *i2cBus, uint8_t address)
-{
-
-    i2cBus->beginTransmission(address);
-    i2cBus->write(0xFA);
-    i2cBus->write(0x0F);
-
-    if (i2cBus->endTransmission() != 0)
-        return false;
-
-    if (i2cBus->requestFrom(address, (uint8_t)8) != 8)
-        return false;
-
-    // Just flush the data
-    while (i2cBus->available() < 8) {
-        i2cBus->read();
-    }
-
-    i2cBus->beginTransmission(address);
-    i2cBus->write(0xFC);
-    i2cBus->write(0xC9);
-
-    if (i2cBus->endTransmission() != 0)
-        return false;
-
-    if (i2cBus->requestFrom(address, (uint8_t)6) != 6)
-        return false;
-
-    // Just flush the data
-    while (i2cBus->available() < 6) {
-        i2cBus->read();
-    }
-
-    // Assume we detect the SHT21 if something came back from the request
-    return true;
-}
-#endif
 
 #define SCAN_SIMPLE_CASE(ADDR, T, ...)                                                                                           \
     case ADDR:                                                                                                                   \
@@ -413,7 +371,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 break;
 #endif
 #if !defined(M5STACK_UNITC6L)
-            case INA_ADDR: // Same as SHT2X
+            case INA_ADDR:
             case INA_ADDR_ALTERNATE:
             case INA_ADDR_WAVESHARE_UPS:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2);
@@ -429,12 +387,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                         logFoundDevice("INA260", (uint8_t)addr.address);
                         type = INA260;
                     }
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
-                } else if (detectSHT21SerialNumber(i2cBus, (uint8_t)addr.address)) {
-                    logFoundDevice("SHTXX (SHT2X)", (uint8_t)addr.address);
-                    type = SHTXX;
-#endif
-                } else { // Assume INA219 if none of the above ones are found
+                } else { // Assume INA219 if INA260 ID is not found
                     logFoundDevice("INA219", (uint8_t)addr.address);
                     type = INA219;
                 }
@@ -495,19 +448,22 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     }
                     break;
                 }
-            case SHTXX_ADDR:     // same as OPT3001_ADDR_ALT
-            case SHTXX_ADDR_ALT: // same as OPT3001_ADDR
+            case SHT31_4x_ADDR:     // same as OPT3001_ADDR_ALT
+            case SHT31_4x_ADDR_ALT: // same as OPT3001_ADDR
                 if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
                     type = OPT3001;
                     logFoundDevice("OPT3001", (uint8_t)addr.address);
-                } else { // SHTXX
-                    type = SHTXX;
-                    logFoundDevice("SHTXX", (uint8_t)addr.address);
+                } else if (i2cCommandResponseLength(addr, 0x89, 6)) { // SHT4x serial number (6 bytes inc. CRC)
+                    type = SHT4X;
+                    logFoundDevice("SHT4X", (uint8_t)addr.address);
+                } else {
+                    type = SHT31;
+                    logFoundDevice("SHT31", (uint8_t)addr.address);
                 }
 
                 break;
 
-                SCAN_SIMPLE_CASE(SHTC3_ADDR, SHTXX, "SHTXX", (uint8_t)addr.address)
+                SCAN_SIMPLE_CASE(SHTC3_ADDR, SHTC3, "SHTC3", (uint8_t)addr.address)
             case RCWL9620_ADDR:
                 // get MAX30102 PARTID
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFF), 1);
@@ -555,6 +511,9 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 if (registerValue == 0x6A) {
                     type = LSM6DS3;
                     logFoundDevice("LSM6DS3", (uint8_t)addr.address);
+                } else if (registerValue == 0x6C) {
+                    type = LSM6DSOX;
+                    logFoundDevice("LSM6DSOX", (uint8_t)addr.address);
                 } else {
                     type = QMI8658;
                     logFoundDevice("QMI8658", (uint8_t)addr.address);
@@ -592,7 +551,19 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 
                 break;
 
-                SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address);
+            case LSM6DS3_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 1);
+                if (registerValue == 0x6A) {
+                    type = LSM6DS3;
+                    logFoundDevice("LSM6DS3", (uint8_t)addr.address);
+                } else if (registerValue == 0x6C) {
+                    type = LSM6DSOX;
+                    logFoundDevice("LSM6DSOX", (uint8_t)addr.address);
+                } else {
+                    type = QMI8658;
+                    logFoundDevice("QMI8658", (uint8_t)addr.address);
+                }
+                break;
                 SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
             case TCA9555_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x01), 1);
@@ -719,7 +690,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     logFoundDevice("BMX160", (uint8_t)addr.address);
                     break;
                 } else {
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_AIR_QUALITY_SENSOR
                     String prod = "";
                     prod = readSEN5xProductName(i2cBus, addr.address);
                     if (prod.startsWith("SEN55")) {
@@ -735,7 +705,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                         logFoundDevice("Sensirion SEN50", addr.address);
                         break;
                     }
-#endif
                     if (addr.address == BMX160_ADDR) {
                         type = BMX160;
                         logFoundDevice("BMX160", (uint8_t)addr.address);

src/gps/GPS.cpp

@@ -103,14 +103,6 @@ static int32_t gpsSwitch()
     if (gps) {
         int currentState = digitalRead(PIN_GPS_SWITCH);
 
-        // Respect explicit NOT_PRESENT mode and do not let the hardware switch re-enable GPS.
-        if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_NOT_PRESENT) {
-            gps->disable();
-            lastState = currentState;
-            firstrun = false;
-            return 1000;
-        }
-
         // if the switch is set to zero, disable the GPS Thread
         if (firstrun)
             if (currentState == LOW)

src/gps/RTC.cpp

@@ -2,7 +2,6 @@
 #include "configuration.h"
 #include "detect/ScanI2C.h"
 #include "main.h"
-#include "modules/NodeInfoModule.h"
 #include <Throttle.h>
 #include <sys/time.h>
 #include <time.h>
@@ -13,14 +12,6 @@ uint32_t lastSetFromPhoneNtpOrGps = 0;
 static uint32_t lastTimeValidationWarning = 0;
 static const uint32_t TIME_VALIDATION_WARNING_INTERVAL_MS = 15000; // 15 seconds
 
-static void triggerNodeInfoCheckOnTimeSource(RTCQuality oldQuality, RTCQuality newQuality)
-{
-    if (oldQuality == RTCQualityNone && newQuality > RTCQualityNone && nodeInfoModule) {
-        LOG_DEBUG("Time source acquired (%s -> %s), triggering NodeInfo recheck", RtcName(oldQuality), RtcName(newQuality));
-        nodeInfoModule->triggerImmediateNodeInfoCheck();
-    }
-}
-
 RTCQuality getRTCQuality()
 {
     return currentQuality;
@@ -70,11 +61,9 @@ RTCSetResult readFromRTC()
         LOG_DEBUG("Read RTC time from RV3028 getTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
         if (currentQuality == RTCQualityNone) {
-            RTCQuality oldQuality = currentQuality;
             timeStartMsec = now;
             zeroOffsetSecs = tv.tv_sec;
             currentQuality = RTCQualityDevice;
-            triggerNodeInfoCheckOnTimeSource(oldQuality, currentQuality);
         }
         return RTCSetResultSuccess;
     } else {
@@ -116,11 +105,9 @@ RTCSetResult readFromRTC()
         LOG_DEBUG("Read RTC time from %s getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", rtc.getChipName(), t.tm_year + 1900,
                   t.tm_mon + 1, t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
         if (currentQuality == RTCQualityNone) {
-            RTCQuality oldQuality = currentQuality;
             timeStartMsec = now;
             zeroOffsetSecs = tv.tv_sec;
             currentQuality = RTCQualityDevice;
-            triggerNodeInfoCheckOnTimeSource(oldQuality, currentQuality);
         }
         return RTCSetResultSuccess;
     } else {
@@ -152,11 +139,9 @@ RTCSetResult readFromRTC()
             }
 #endif
             if (currentQuality == RTCQualityNone) {
-                RTCQuality oldQuality = currentQuality;
                 timeStartMsec = now;
                 zeroOffsetSecs = tv.tv_sec;
                 currentQuality = RTCQualityDevice;
-                triggerNodeInfoCheckOnTimeSource(oldQuality, currentQuality);
             }
             return RTCSetResultSuccess;
         }
@@ -229,7 +214,6 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
     }
 
     if (shouldSet) {
-        RTCQuality oldQuality = currentQuality;
         currentQuality = q;
         lastSetMsec = now;
         if (currentQuality >= RTCQualityNTP) {
@@ -297,7 +281,6 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
 #endif
 
         readFromRTC();
-        triggerNodeInfoCheckOnTimeSource(oldQuality, currentQuality);
         return RTCSetResultSuccess;
     } else {
         return RTCSetResultNotSet; // RTC was already set with a higher quality time
@@ -414,17 +397,6 @@ uint32_t getValidTime(RTCQuality minQuality, bool local)
     return (currentQuality >= minQuality) ? getTime(local) : 0;
 }
 
-#ifdef PIO_UNIT_TESTING
-void setBootRelativeTimeForUnitTest(uint32_t secondsSinceBoot)
-{
-    currentQuality = RTCQualityNone;
-    zeroOffsetSecs = 0;
-    timeStartMsec = millis() - (secondsSinceBoot * 1000);
-    lastSetFromPhoneNtpOrGps = 0;
-    lastTimeValidationWarning = 0;
-}
-#endif
-
 time_t gm_mktime(const struct tm *tm)
 {
 #if !MESHTASTIC_EXCLUDE_TZ

src/gps/RTC.h

@@ -54,10 +54,6 @@ uint32_t getValidTime(RTCQuality minQuality, bool local = false);
 
 RTCSetResult readFromRTC();
 
-#ifdef PIO_UNIT_TESTING
-void setBootRelativeTimeForUnitTest(uint32_t secondsSinceBoot);
-#endif
-
 time_t gm_mktime(const struct tm *tm);
 
 #define SEC_PER_DAY 86400

src/graphics/EInkDisplay2.cpp

@@ -1,6 +1,6 @@
 #include "configuration.h"
 
-#if defined(USE_EINK) && !defined(USE_EINK_PARALLELDISPLAY)
+#ifdef USE_EINK
 #include "EInkDisplay2.h"
 #include "SPILock.h"
 #include "main.h"

src/graphics/EInkDisplay2.h

@@ -1,6 +1,6 @@
 #pragma once
 
-#if defined(USE_EINK) && !defined(USE_EINK_PARALLELDISPLAY)
+#ifdef USE_EINK
 
 #include "GxEPD2_BW.h"
 #include <OLEDDisplay.h>

src/graphics/EInkParallelDisplay.cpp

@@ -1,427 +0,0 @@
-#include "EInkParallelDisplay.h"
-
-#ifdef USE_EINK_PARALLELDISPLAY
-
-#include "Wire.h"
-#include "variant.h"
-#include <Arduino.h>
-#include <atomic>
-#include <stdlib.h>
-#include <string.h>
-
-#include "FastEPD.h"
-
-// Thresholds for choosing partial vs full update
-#ifndef EPD_PARTIAL_THRESHOLD_ROWS
-#define EPD_PARTIAL_THRESHOLD_ROWS 128 // if changed region <= this many rows, prefer partial
-#endif
-#ifndef EPD_FULLSLOW_PERIOD
-#define EPD_FULLSLOW_PERIOD 100 // every N full updates do a slow (CLEAR_SLOW) full refresh
-#endif
-#ifndef EPD_RESPONSIVE_MIN_MS
-#define EPD_RESPONSIVE_MIN_MS 1000 // simple rate-limit (ms) for responsive updates
-#endif
-
-EInkParallelDisplay::EInkParallelDisplay(uint16_t width, uint16_t height, EpdRotation rot) : epaper(nullptr), rotation(rot)
-{
-    LOG_INFO("init EInkParallelDisplay");
-    // Set dimensions in OLEDDisplay base class
-    this->geometry = GEOMETRY_RAWMODE;
-    this->displayWidth = width;
-    this->displayHeight = height;
-
-    // Round shortest side up to nearest byte, to prevent truncation causing an undersized buffer
-    uint16_t shortSide = min(width, height);
-    uint16_t longSide = max(width, height);
-    if (shortSide % 8 != 0)
-        shortSide = (shortSide | 7) + 1;
-
-    this->displayBufferSize = longSide * (shortSide / 8);
-
-#ifdef EINK_LIMIT_GHOSTING_PX
-    // allocate dirty pixel buffer same size as epaper buffers (rowBytes * height)
-    size_t rowBytes = (this->displayWidth + 7) / 8;
-    dirtyPixelsSize = rowBytes * this->displayHeight;
-    dirtyPixels = (uint8_t *)calloc(dirtyPixelsSize, 1);
-    ghostPixelCount = 0;
-#endif
-}
-
-EInkParallelDisplay::~EInkParallelDisplay()
-{
-#ifdef EINK_LIMIT_GHOSTING_PX
-    if (dirtyPixels) {
-        free(dirtyPixels);
-        dirtyPixels = nullptr;
-    }
-#endif
-    // If an async full update is running, wait for it to finish
-    if (asyncFullRunning.load()) {
-        // wait a short while for task to finish
-        for (int i = 0; i < 50 && asyncFullRunning.load(); ++i) {
-            delay(50);
-        }
-        if (asyncTaskHandle) {
-            // Let it finish or delete it
-            vTaskDelete(asyncTaskHandle);
-            asyncTaskHandle = nullptr;
-        }
-    }
-
-    delete epaper;
-}
-
-/*
- * Called by the OLEDDisplay::init() path.
- */
-bool EInkParallelDisplay::connect()
-{
-    LOG_INFO("Do EPD init");
-    if (!epaper) {
-        epaper = new FASTEPD;
-#if defined(T5_S3_EPAPER_PRO_V1)
-        epaper->initPanel(BB_PANEL_LILYGO_T5PRO, 28000000);
-#elif defined(T5_S3_EPAPER_PRO_V2)
-        epaper->initPanel(BB_PANEL_LILYGO_T5PRO_V2, 28000000);
-        // initialize all port 0 pins (0-7) as outputs / HIGH
-        for (int i = 0; i < 8; i++) {
-            epaper->ioPinMode(i, OUTPUT);
-            epaper->ioWrite(i, HIGH);
-        }
-#else
-#error "unsupported EPD device!"
-#endif
-    }
-
-    // epaper->setRotation(rotation); // does not work, messes up width/height
-    epaper->setMode(BB_MODE_1BPP);
-    epaper->clearWhite();
-    epaper->fullUpdate(true);
-
-#ifdef EINK_LIMIT_GHOSTING_PX
-    // After a full/clear the dirty tracking should be reset
-    resetGhostPixelTracking();
-#endif
-
-    return true;
-}
-
-/*
- * sendCommand - simple passthrough (not required for epd_driver-based path)
- */
-void EInkParallelDisplay::sendCommand(uint8_t com)
-{
-    LOG_DEBUG("EInkParallelDisplay::sendCommand %d", (int)com);
-}
-
-/*
- * Start a background task that will perform a blocking fullUpdate(). This lets
- * display() return quickly while the heavy refresh runs in the background.
- */
-void EInkParallelDisplay::startAsyncFullUpdate(int clearMode)
-{
-    if (asyncFullRunning.load())
-        return; // already running
-
-    asyncFullRunning.store(true);
-    // pass 'this' as parameter
-    BaseType_t rc = xTaskCreatePinnedToCore(EInkParallelDisplay::asyncFullUpdateTask, "epd_full", 4096 / sizeof(StackType_t),
-                                            this, 2, &asyncTaskHandle,
-#if CONFIG_FREERTOS_UNICORE
-                                            0
-#else
-                                            1
-#endif
-    );
-    if (rc != pdPASS) {
-        LOG_WARN("Failed to create async full-update task, falling back to blocking update");
-        epaper->fullUpdate(clearMode, false);
-        epaper->backupPlane();
-        asyncFullRunning.store(false);
-        asyncTaskHandle = nullptr;
-    }
-}
-
-/*
- * FreeRTOS task entry: runs the full update and then backs up plane.
- */
-void EInkParallelDisplay::asyncFullUpdateTask(void *pvParameters)
-{
-    EInkParallelDisplay *self = static_cast<EInkParallelDisplay *>(pvParameters);
-    if (!self) {
-        vTaskDelete(nullptr);
-        return;
-    }
-
-    // choose CLEAR_SLOW occasionally
-    int clearMode = CLEAR_FAST;
-    if (self->fastRefreshCount >= EPD_FULLSLOW_PERIOD) {
-        clearMode = CLEAR_SLOW;
-        self->fastRefreshCount = 0;
-    } else {
-        // when running async full, treat it as a full so reset fast count
-        self->fastRefreshCount = 0;
-    }
-
-    self->epaper->fullUpdate(clearMode, false);
-    self->epaper->backupPlane();
-
-#ifdef EINK_LIMIT_GHOSTING_PX
-    // A full refresh clears ghosting state
-    self->resetGhostPixelTracking();
-#endif
-
-    self->asyncFullRunning.store(false);
-    self->asyncTaskHandle = nullptr;
-
-    // delete this task
-    vTaskDelete(nullptr);
-}
-
-/*
- * Convert the OLEDDisplay buffer (vertical byte layout) into the 1bpp horizontal-bytes
- * buffer used by the FASTEPD library. For performance we write directly into FASTEPD's
- * currentBuffer() while comparing against previousBuffer() to detect changed rows.
- * After conversion we call FASTEPD::partialUpdate() or FASTEPD::fullUpdate() according
- * to a heuristic so only the minimal region is refreshed.
- */
-void EInkParallelDisplay::display(void)
-{
-    const uint16_t w = this->displayWidth;
-    const uint16_t h = this->displayHeight;
-
-    // Simple rate limiting: avoid very-frequent responsive updates
-    uint32_t nowMs = millis();
-    if (lastUpdateMs != 0 && (nowMs - lastUpdateMs) < EPD_RESPONSIVE_MIN_MS) {
-        LOG_DEBUG("rate-limited, skipping update");
-        return;
-    }
-
-    // bytes per row in epd format (one byte = 8 horizontal pixels)
-    const uint32_t rowBytes = (w + 7) / 8;
-
-    // Get pointers to internal buffers
-    uint8_t *cur = epaper->currentBuffer();
-    uint8_t *prev = epaper->previousBuffer(); // may be NULL on first init
-
-    // Track changed row range while converting
-    int newTop = h;     // min changed row (initialized to out-of-range)
-    int newBottom = -1; // max changed row
-
-#ifdef FAST_EPD_PARTIAL_UPDATE_BUG
-    // Track changed byte column range (for clipped fullUpdate fallback)
-    int newLeftByte = (int)rowBytes;
-    int newRightByte = -1;
-#endif
-
-    // Compute a quick hash of the incoming OLED buffer (so we can skip identical frames)
-    uint32_t imageHash = 0;
-    uint32_t bufBytes = (w / 8) * h; // vertical-byte layout size
-    for (uint32_t bi = 0; bi < bufBytes; ++bi) {
-        imageHash ^= ((uint32_t)buffer[bi]) << (bi & 31);
-    }
-    if (imageHash == previousImageHash) {
-        // LOG_DEBUG("image identical to previous, skipping update");
-        return;
-    }
-
-#ifdef EINK_LIMIT_GHOSTING_PX
-    // reset ghost count for this conversion pass; we'll mark bits that change
-    ghostPixelCount = 0;
-#endif
-
-    // Convert: OLED buffer layout -> FASTEPD 1bpp horizontal-bytes layout into cur,
-    // comparing against prev when available to detect changes.
-    for (uint32_t y = 0; y < h; ++y) {
-        const uint32_t base = (y >> 3) * w;               // (y/8) * width
-        const uint8_t bitMask = (uint8_t)(1u << (y & 7)); // mask for this row in vertical-byte layout
-        const uint32_t rowBase = y * rowBytes;
-
-        // process full 8-pixel bytes
-        for (uint32_t xb = 0; xb < rowBytes; ++xb) {
-            uint32_t x0 = xb * 8;
-            // read up to 8 source bytes (vertical-byte per column)
-            uint8_t b0 = (x0 + 0 < w) ? buffer[base + x0 + 0] : 0;
-            uint8_t b1 = (x0 + 1 < w) ? buffer[base + x0 + 1] : 0;
-            uint8_t b2 = (x0 + 2 < w) ? buffer[base + x0 + 2] : 0;
-            uint8_t b3 = (x0 + 3 < w) ? buffer[base + x0 + 3] : 0;
-            uint8_t b4 = (x0 + 4 < w) ? buffer[base + x0 + 4] : 0;
-            uint8_t b5 = (x0 + 5 < w) ? buffer[base + x0 + 5] : 0;
-            uint8_t b6 = (x0 + 6 < w) ? buffer[base + x0 + 6] : 0;
-            uint8_t b7 = (x0 + 7 < w) ? buffer[base + x0 + 7] : 0;
-
-            // build output byte: MSB = leftmost pixel
-            uint8_t out = 0;
-            out |= (uint8_t)((b0 & bitMask) ? 0x80 : 0x00);
-            out |= (uint8_t)((b1 & bitMask) ? 0x40 : 0x00);
-            out |= (uint8_t)((b2 & bitMask) ? 0x20 : 0x00);
-            out |= (uint8_t)((b3 & bitMask) ? 0x10 : 0x00);
-            out |= (uint8_t)((b4 & bitMask) ? 0x08 : 0x00);
-            out |= (uint8_t)((b5 & bitMask) ? 0x04 : 0x00);
-            out |= (uint8_t)((b6 & bitMask) ? 0x02 : 0x00);
-            out |= (uint8_t)((b7 & bitMask) ? 0x01 : 0x00);
-
-            // handle partial byte at end of row by masking off invalid bits
-            uint8_t mask = 0xFF;
-            uint32_t bitsRemain = (w > x0) ? (w - x0) : 0;
-            if (bitsRemain > 0 && bitsRemain < 8) {
-                mask = (uint8_t)(0xFF << (8 - bitsRemain));
-                out &= mask;
-            }
-
-            // invert to FASTEPD polarity
-            out = (~out) & mask;
-
-            uint32_t pos = rowBase + xb;
-            uint8_t prevVal = prev ? (prev[pos] & mask) : 0x00;
-            // Consider this byte changed if previous buffer differs (or prev is null)
-            bool changed = (prev == nullptr) || (prevVal != out);
-
-#ifdef EINK_LIMIT_GHOSTING_PX
-            if (changed && prev)
-                markDirtyBits(prev, pos, mask, out);
-#endif
-
-            // mark row changed only if the previous buffer differs
-            if (changed) {
-                if (y < (uint32_t)newTop)
-                    newTop = y;
-                if ((int)y > newBottom)
-                    newBottom = y;
-#ifdef FAST_EPD_PARTIAL_UPDATE_BUG
-                // record changed column bytes
-                if ((int)xb < newLeftByte)
-                    newLeftByte = (int)xb;
-                if ((int)xb > newRightByte)
-                    newRightByte = (int)xb;
-#endif
-            }
-
-            // Always write the computed value into the current buffer (avoid leaving stale bytes)
-            cur[pos] = (cur[pos] & ~mask) | out;
-        }
-    }
-
-    // If nothing changed, avoid any panel update
-    if (newBottom < 0) {
-        LOG_DEBUG("no pixel changes detected, skipping update (conv)");
-        previousImageHash = imageHash; // still remember that frame
-        return;
-    }
-
-    // Choose partial vs full update using heuristic
-    // Decide if we should force a full update after many fast updates
-    bool forceFull = (fastRefreshCount >= EPD_FULLSLOW_PERIOD);
-
-#ifdef EINK_LIMIT_GHOSTING_PX
-    // If ghost pixels exceed limit, force a full update to clear ghosting
-    if (ghostPixelCount > ghostPixelLimit) {
-        LOG_WARN("ghost pixels %u > limit %u, forcing full refresh", ghostPixelCount, ghostPixelLimit);
-        forceFull = true;
-    }
-#endif
-
-    // Compute pixel bounds from newTop/newBottom
-    int startRow = (newTop / 8) * 8;
-    int endRow = (newBottom / 8) * 8 + 7;
-
-    LOG_DEBUG("EPD update rows=%d..%d alignedRows=%d..%d rowBytes=%u", newTop, newBottom, startRow, endRow, rowBytes);
-
-    if (epaper->getMode() == BB_MODE_1BPP && !forceFull && (newBottom - newTop) <= EPD_PARTIAL_THRESHOLD_ROWS) {
-        // Prefer partial update path if driver is reliable; otherwise use clipped fullUpdate fallback.
-#ifdef FAST_EPD_PARTIAL_UPDATE_BUG
-        // Workaround for FastEPD partial update bug: use clipped fullUpdate instead
-        // Build a pixel rectangle for a clipped fullUpdate using the changed columns
-        int startCol = (newLeftByte <= newRightByte) ? (newLeftByte * 8) : 0;
-        int endCol = (newLeftByte <= newRightByte) ? ((newRightByte + 1) * 8 - 1) : (w - 1);
-
-        BB_RECT rect{startCol, startRow, endCol - startCol + 1, endRow - startRow + 1};
-        // LOG_DEBUG("Using clipped fullUpdate rect x=%d y=%d w=%d h=%d", rect.x, rect.y, rect.w, rect.h);
-        epaper->fullUpdate(CLEAR_FAST, false, &rect);
-#else
-        // Use rows for partial update
-        LOG_DEBUG("calling partialUpdate startRow=%d endRow=%d", startRow, endRow);
-        epaper->partialUpdate(true, startRow, endRow);
-#endif
-        epaper->backupPlane();
-        fastRefreshCount++;
-    } else {
-        // Full update: run async if possible (startAsyncFullUpdate will fall back to blocking)
-        startAsyncFullUpdate(forceFull ? CLEAR_SLOW : CLEAR_FAST);
-    }
-
-    lastUpdateMs = millis();
-    previousImageHash = imageHash;
-
-    // Keep same behavior as before
-    lastDrawMsec = millis();
-}
-
-#ifdef EINK_LIMIT_GHOSTING_PX
-// markDirtyBits: mark per-bit dirty flags and update ghostPixelCount
-void EInkParallelDisplay::markDirtyBits(const uint8_t *prevBuf, uint32_t pos, uint8_t mask, uint8_t out)
-{
-    // defensive: need dirtyPixels allocated and prevBuf valid
-    if (!dirtyPixels || !prevBuf)
-        return;
-
-    // 'out' is in FASTEPD polarity (1 = black, 0 = white)
-    uint8_t newBlack = out & mask;    // bits that will be black now
-    uint8_t newWhite = (~out) & mask; // bits that will be white now
-
-    // previously recorded dirty bits for this byte
-    uint8_t before = dirtyPixels[pos];
-
-    // Ghost bits: bits that were previously marked dirty and are now being driven white
-    uint8_t ghostBits = before & newWhite;
-    if (ghostBits) {
-        ghostPixelCount += __builtin_popcount((unsigned)ghostBits);
-    }
-
-    // Only mark bits dirty when they turn black now (accumulate until a full refresh)
-    uint8_t newlyDirty = newBlack & (~before);
-    if (newlyDirty) {
-        dirtyPixels[pos] |= newlyDirty;
-    }
-}
-
-// reset ghost tracking (call after a full refresh)
-void EInkParallelDisplay::resetGhostPixelTracking()
-{
-    if (!dirtyPixels)
-        return;
-    memset(dirtyPixels, 0, dirtyPixelsSize);
-    ghostPixelCount = 0;
-}
-#endif
-
-/*
- * forceDisplay: use lastDrawMsec
- */
-bool EInkParallelDisplay::forceDisplay(uint32_t msecLimit)
-{
-    uint32_t now = millis();
-    if (lastDrawMsec == 0 || (now - lastDrawMsec) > msecLimit) {
-        display();
-        return true;
-    }
-    return false;
-}
-
-void EInkParallelDisplay::endUpdate()
-{
-    {
-        // ensure any async full update is started/completed
-        if (asyncFullRunning.load()) {
-            // nothing to do; background task will run and call backupPlane when done
-        } else {
-            epaper->fullUpdate(CLEAR_FAST, false);
-            epaper->backupPlane();
-#ifdef EINK_LIMIT_GHOSTING_PX
-            resetGhostPixelTracking();
-#endif
-        }
-    }
-}
-
-#endif

src/graphics/EInkParallelDisplay.h

@@ -1,69 +0,0 @@
-#pragma once
-
-#include "configuration.h"
-
-#ifdef USE_EINK_PARALLELDISPLAY
-#include <OLEDDisplay.h>
-
-#include <atomic>
-#include <freertos/FreeRTOS.h>
-#include <freertos/task.h>
-
-class FASTEPD;
-
-/**
- * Adapter for E-Ink 8-bit parallel displays (EPD), specifically devices supported by FastEPD library
- */
-class EInkParallelDisplay : public OLEDDisplay
-{
-  public:
-    enum EpdRotation {
-        EPD_ROT_LANDSCAPE = 0,
-        EPD_ROT_PORTRAIT = 90,
-        EPD_ROT_INVERTED_LANDSCAPE = 180,
-        EPD_ROT_INVERTED_PORTRAIT = 270,
-    };
-
-    EInkParallelDisplay(uint16_t width, uint16_t height, EpdRotation rotation);
-    virtual ~EInkParallelDisplay();
-
-    // OLEDDisplay virtuals
-    bool connect() override;
-    void sendCommand(uint8_t com) override;
-    int getBufferOffset(void) override { return 0; }
-
-    void display(void) override;
-    bool forceDisplay(uint32_t msecLimit = 1000);
-    void endUpdate();
-
-  protected:
-    uint32_t lastDrawMsec = 0;
-    FASTEPD *epaper;
-
-  private:
-    // Async full-refresh support
-    std::atomic<bool> asyncFullRunning{false};
-    TaskHandle_t asyncTaskHandle = nullptr;
-    void startAsyncFullUpdate(int clearMode);
-    static void asyncFullUpdateTask(void *pvParameters);
-
-#ifdef EINK_LIMIT_GHOSTING_PX
-    // helpers
-    void resetGhostPixelTracking();
-    void markDirtyBits(const uint8_t *prevBuf, uint32_t pos, uint8_t mask, uint8_t out);
-    void countGhostPixelsAndMaybePromote(int &newTop, int &newBottom, bool &forceFull);
-
-    // per-bit dirty buffer (same format as epaper buffers): one bit == one pixel
-    uint8_t *dirtyPixels = nullptr;
-    size_t dirtyPixelsSize = 0;
-    uint32_t ghostPixelCount = 0;
-    uint32_t ghostPixelLimit = EINK_LIMIT_GHOSTING_PX;
-#endif
-
-    EpdRotation rotation;
-    uint32_t previousImageHash = 0;
-    uint32_t lastUpdateMs = 0;
-    int fastRefreshCount = 0;
-};
-
-#endif

src/graphics/Screen.cpp

@@ -27,7 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "configuration.h"
 #include "meshUtils.h"
 #if HAS_SCREEN
-#include "EInkParallelDisplay.h"
 #include <OLEDDisplay.h>
 
 #include "DisplayFormatters.h"
@@ -365,14 +364,12 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
     defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(HACKADAY_COMMUNICATOR)
     dispdev = new TFTDisplay(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
-#elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY) && !defined(USE_EINK_PARALLELDISPLAY)
+#elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
     dispdev = new EInkDisplay(address.address, -1, -1, geometry,
                               (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif defined(USE_EINK) && defined(USE_EINK_DYNAMICDISPLAY)
     dispdev = new EInkDynamicDisplay(address.address, -1, -1, geometry,
                                      (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
-#elif defined(USE_EINK_PARALLELDISPLAY)
-    dispdev = new EInkParallelDisplay(EPD_WIDTH, EPD_HEIGHT, EInkParallelDisplay::EPD_ROT_PORTRAIT);
 #elif defined(USE_ST7567)
     dispdev = new ST7567Wire(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
@@ -762,11 +759,7 @@ void Screen::forceDisplay(bool forceUiUpdate)
     }
 
     // Tell EInk class to update the display
-#if defined(USE_EINK_PARALLELDISPLAY)
-    static_cast<EInkParallelDisplay *>(dispdev)->forceDisplay();
-#elif defined(USE_EINK)
     static_cast<EInkDisplay *>(dispdev)->forceDisplay();
-#endif
 #else
     // No delay between UI frame rendering
     if (forceUiUpdate) {
@@ -1005,10 +998,8 @@ void Screen::setScreensaverFrames(FrameCallback einkScreensaver)
         ui->update();
     } while (ui->getUiState()->lastUpdate < startUpdate);
 
-#if defined(USE_EINK_PARALLELDISPLAY)
-    static_cast<EInkParallelDisplay *>(dispdev)->forceDisplay(0);
-#elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
     // Old EInkDisplay class
+#if !defined(USE_EINK_DYNAMICDISPLAY)
     static_cast<EInkDisplay *>(dispdev)->forceDisplay(0); // Screen::forceDisplay(), but override rate-limit
 #endif
 
@@ -1020,7 +1011,7 @@ void Screen::setScreensaverFrames(FrameCallback einkScreensaver)
 #ifdef EINK_HASQUIRK_GHOSTING
     EINK_ADD_FRAMEFLAG(dispdev, COSMETIC); // Really ugly to see ghosting from "screen paused"
 #else
-    EINK_ADD_FRAMEFLAG(dispdev, RESPONSIVE);              // Really nice to wake screen with a fast-refresh
+    EINK_ADD_FRAMEFLAG(dispdev, RESPONSIVE); // Really nice to wake screen with a fast-refresh
 #endif
 }
 #endif

src/graphics/ScreenFonts.h

@@ -20,7 +20,7 @@
 #include "graphics/fonts/OLEDDisplayFontsGR.h"
 #endif
 
-#if (defined(CROWPANEL_ESP32S3_5_EPAPER) || defined(T5_S3_EPAPER_PRO)) && defined(USE_EINK)
+#if defined(CROWPANEL_ESP32S3_5_EPAPER) && defined(USE_EINK)
 #include "graphics/fonts/EinkDisplayFonts.h"
 #endif
 
@@ -90,7 +90,7 @@
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) ||             \
-     defined(USE_ST7796) || defined(HACKADAY_COMMUNICATOR)) &&                                                                   \
+     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) &&                                                                   \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL FONT_MEDIUM_LOCAL // Height: 19
@@ -106,7 +106,7 @@
 #define FONT_LARGE FONT_LARGE_LOCAL   // Height: 28
 #endif
 
-#if defined(CROWPANEL_ESP32S3_5_EPAPER) || defined(T5_S3_EPAPER_PRO)
+#if defined(CROWPANEL_ESP32S3_5_EPAPER) && defined(USE_EINK)
 #undef FONT_SMALL
 #undef FONT_MEDIUM
 #undef FONT_LARGE

src/graphics/TFTDisplay.cpp

@@ -1254,14 +1254,14 @@ void TFTDisplay::display(bool fromBlank)
 
         // Did we find a pixel that needs updating on this row?
         if (x_FirstPixelUpdate < displayWidth) {
-            // Align the first pixel for update to an even number so the total alignment of
-            // the data will be at 32-bit boundary, which is required by GDMA SPI transfers.
-            x_FirstPixelUpdate &= ~1;
 
-            // Step 3a: copy rest of the pixels in this row into the pixel line buffer,
-            // while also recording the last pixel in the row that needs updating.
-            // Since the first changed pixel will be looked up, the x_LastPixelUpdate will be set.
-            for (x = x_FirstPixelUpdate; x < displayWidth; x++) {
+            // Quickly write out the first changed pixel (saves another array lookup)
+            linePixelBuffer[x_FirstPixelUpdate] = isset ? colorTftMesh : colorTftBlack;
+            x_LastPixelUpdate = x_FirstPixelUpdate;
+
+            // Step 3: copy all remaining pixels in this row into the pixel line buffer,
+            // while also recording the last pixel in the row that needs updating
+            for (x = x_FirstPixelUpdate + 1; x < displayWidth; x++) {
                 isset = buffer[x + y_byteIndex] & y_byteMask;
                 linePixelBuffer[x] = isset ? colorTftMesh : colorTftBlack;
 
@@ -1274,14 +1274,6 @@ void TFTDisplay::display(bool fromBlank)
                     x_LastPixelUpdate = x;
                 }
             }
-            // Step 3b: Round up the last pixel to odd number to maintain 32-bit alignment for SPIs.
-            // Most displays will have even number of pixels in a row -- this will be in bounds
-            // of the displayWidth. (Hopefully odd displays will just ignore that extra pixel.)
-            x_LastPixelUpdate |= 1;
-            // Ensure the last pixel index does not exceed the display width.
-            if (x_LastPixelUpdate >= displayWidth) {
-                x_LastPixelUpdate = displayWidth - 1;
-            }
 #if defined(HACKADAY_COMMUNICATOR)
             tft->draw16bitBeRGBBitmap(x_FirstPixelUpdate, y, &linePixelBuffer[x_FirstPixelUpdate],
                                       (x_LastPixelUpdate - x_FirstPixelUpdate + 1), 1);
@@ -1356,7 +1348,7 @@ void TFTDisplay::sendCommand(uint8_t com)
             digitalWrite(portduino_config.displayBacklight.pin, TFT_BACKLIGHT_ON);
 #elif defined(HACKADAY_COMMUNICATOR)
         tft->displayOn();
-#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE) && !defined(HELTEC_MESH_NODE_T096)
+#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
         tft->wakeup();
         tft->powerSaveOff();
 #endif
@@ -1367,7 +1359,7 @@ void TFTDisplay::sendCommand(uint8_t com)
 #ifdef UNPHONE
         unphone.backlight(true); // using unPhone library
 #endif
-#if defined(RAK14014) || defined(HELTEC_MESH_NODE_T096)
+#ifdef RAK14014
 #elif !defined(M5STACK) && !defined(ST7789_CS) &&                                                                                \
     !defined(HACKADAY_COMMUNICATOR) // T-Deck gets brightness set in Screen.cpp in the handleSetOn function
         tft->setBrightness(172);
@@ -1383,7 +1375,7 @@ void TFTDisplay::sendCommand(uint8_t com)
             digitalWrite(portduino_config.displayBacklight.pin, !TFT_BACKLIGHT_ON);
 #elif defined(HACKADAY_COMMUNICATOR)
         tft->displayOff();
-#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE) && !defined(HELTEC_MESH_NODE_T096)
+#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
         tft->sleep();
         tft->powerSaveOn();
 #endif
@@ -1394,7 +1386,7 @@ void TFTDisplay::sendCommand(uint8_t com)
 #ifdef UNPHONE
         unphone.backlight(false); // using unPhone library
 #endif
-#if defined(RAK14014) || defined(HELTEC_MESH_NODE_T096)
+#ifdef RAK14014
 #elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
         tft->setBrightness(0);
 #endif
@@ -1409,7 +1401,7 @@ void TFTDisplay::sendCommand(uint8_t com)
 
 void TFTDisplay::setDisplayBrightness(uint8_t _brightness)
 {
-#if defined(RAK14014) || defined(HELTEC_MESH_NODE_T096)
+#ifdef RAK14014
     // todo
 #elif !defined(HACKADAY_COMMUNICATOR)
     tft->setBrightness(_brightness);
@@ -1429,7 +1421,7 @@ bool TFTDisplay::hasTouch(void)
 {
 #ifdef RAK14014
     return true;
-#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR) && !defined(HELTEC_MESH_NODE_T096)
+#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
     return tft->touch() != nullptr;
 #else
     return false;
@@ -1448,7 +1440,7 @@ bool TFTDisplay::getTouch(int16_t *x, int16_t *y)
     } else {
         return false;
     }
-#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR) && !defined(HELTEC_MESH_NODE_T096)
+#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
     return tft->getTouch(x, y);
 #else
     return false;
@@ -1465,7 +1457,7 @@ bool TFTDisplay::connect()
 {
     concurrency::LockGuard g(spiLock);
     LOG_INFO("Do TFT init");
-#if defined(RAK14014) || defined(HELTEC_MESH_NODE_T096)
+#ifdef RAK14014
     tft = new TFT_eSPI;
 #elif defined(HACKADAY_COMMUNICATOR)
     bus = new Arduino_ESP32SPI(TFT_DC, TFT_CS, 38 /* SCK */, 21 /* MOSI */, GFX_NOT_DEFINED /* MISO */, HSPI /* spi_num */);
@@ -1502,7 +1494,7 @@ bool TFTDisplay::connect()
     ft6336u.begin();
     pinMode(SCREEN_TOUCH_INT, INPUT_PULLUP);
     attachInterrupt(digitalPinToInterrupt(SCREEN_TOUCH_INT), rak14014_tpIntHandle, FALLING);
-#elif defined(T_DECK) || defined(PICOMPUTER_S3) || defined(CHATTER_2) || defined(HELTEC_MESH_NODE_T096)
+#elif defined(T_DECK) || defined(PICOMPUTER_S3) || defined(CHATTER_2)
     tft->setRotation(1); // T-Deck has the TFT in landscape
 #elif defined(T_WATCH_S3)
     tft->setRotation(2); // T-Watch S3 left-handed orientation

src/graphics/draw/DebugRenderer.cpp

@@ -408,16 +408,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     display->drawString(nameX, getTextPositions(display)[line++], device_role);
 
     // === Third Row: Radio Preset ===
-    // For custom modem settings show the actual parameters; for presets use the preset name.
-    char modeStr[16];
-    if (!config.lora.use_preset) {
-        snprintf(modeStr, sizeof(modeStr), "BW%u-SF%u-CR%u", static_cast<unsigned>(config.lora.bandwidth),
-                 static_cast<unsigned>(config.lora.spread_factor), static_cast<unsigned>(config.lora.coding_rate));
-    } else {
-        strncpy(modeStr, DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, true),
-                sizeof(modeStr) - 1);
-        modeStr[sizeof(modeStr) - 1] = '\0';
-    }
+    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset);
 
     char regionradiopreset[25];
     const char *region = myRegion ? myRegion->name : NULL;
@@ -425,7 +416,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
         if (currentResolution == ScreenResolution::UltraLow) {
             snprintf(regionradiopreset, sizeof(regionradiopreset), "%s", region);
         } else {
-            snprintf(regionradiopreset, sizeof(regionradiopreset), "%s/%s", region, modeStr);
+            snprintf(regionradiopreset, sizeof(regionradiopreset), "%s/%s", region, mode);
         }
     }
     textWidth = display->getStringWidth(regionradiopreset);
@@ -544,9 +535,6 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
 #ifndef T_DECK_PRO
     barsOffset -= 12;
 #endif
-#if defined(T5_S3_EPAPER_PRO)
-    barsOffset += 60;
-#endif
 #endif
     int barX = x + barsOffset;
     if (currentResolution == ScreenResolution::UltraLow) {
@@ -596,12 +584,11 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
     uint32_t heapUsed = memGet.getHeapSize() - memGet.getFreeHeap();
     uint32_t heapTotal = memGet.getHeapSize();
 
-    uint32_t flashUsed = 0, flashTotal = 0;
-#ifdef ESP32
-#ifndef T5_S3_EPAPER_PRO
     uint32_t psramUsed = memGet.getPsramSize() - memGet.getFreePsram();
     uint32_t psramTotal = memGet.getPsramSize();
-#endif
+
+    uint32_t flashUsed = 0, flashTotal = 0;
+#ifdef ESP32
     flashUsed = FSCom.usedBytes();
     flashTotal = FSCom.totalBytes();
 #endif
@@ -620,12 +607,10 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
     // === Draw memory rows
     drawUsageRow("Heap:", heapUsed, heapTotal, true);
 #ifdef ESP32
-#ifndef T5_S3_EPAPER_PRO
     if (psramUsed > 0) {
         line += 1;
         drawUsageRow("PSRAM:", psramUsed, psramTotal);
     }
-#endif
     if (flashTotal > 0) {
         line += 1;
         drawUsageRow("Flash:", flashUsed, flashTotal);

src/graphics/draw/MenuHandler.cpp

@@ -18,7 +18,6 @@
 #include "main.h"
 #include "mesh/Default.h"
 #include "mesh/MeshTypes.h"
-#include "mesh/RadioLibInterface.h"
 #include "modules/AdminModule.h"
 #include "modules/CannedMessageModule.h"
 #include "modules/ExternalNotificationModule.h"
@@ -26,7 +25,6 @@
 #include "modules/TraceRouteModule.h"
 #include <algorithm>
 #include <array>
-#include <cmath>
 #include <functional>
 #include <utility>
 
@@ -161,22 +159,31 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
                 return;
             }
 
-            // Guard: without a reboot, reconfigure() applies the region directly.
-            // Reject LORA_24 on sub-GHz-only hardware — getRadio() used to catch this post-reboot.
-            // TODO: change this to either use the validateLoraConfig() logic or at least check the region for wideLora
-            // rather than a hardcoded check for LORA_24.
-            if (selectedRegion == meshtastic_Config_LoRaConfig_RegionCode_LORA_24 &&
-                !(RadioLibInterface::instance && RadioLibInterface::instance->wideLora())) {
-                LOG_WARN("Radio hardware does not support 2.4 GHz; ignoring region selection");
-                return;
-            }
-
             config.lora.region = selectedRegion;
             auto changes = SEGMENT_CONFIG;
 
+        // FIXME: This should be a method consolidated with the same logic in the admin message as well
+        // This is needed as we wait til picking the LoRa region to generate keys for the first time.
 #if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN || MESHTASTIC_EXCLUDE_PKI)
-            if (crypto) {
-                crypto->ensurePkiKeys(config.security, owner);
+            if (!owner.is_licensed) {
+                bool keygenSuccess = false;
+                if (config.security.private_key.size == 32) {
+                    // public key is derived from private, so this will always have the same result.
+                    if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
+                        keygenSuccess = true;
+                    }
+
+                } else {
+                    LOG_INFO("Generate new PKI keys");
+                    crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes);
+                    keygenSuccess = true;
+                }
+                if (keygenSuccess) {
+                    config.security.public_key.size = 32;
+                    config.security.private_key.size = 32;
+                    owner.public_key.size = 32;
+                    memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
+                }
             }
 #endif
             config.lora.tx_enabled = true;
@@ -192,6 +199,7 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
             }
 
             service->reloadConfig(changes);
+            rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
         });
 
     bannerOptions.durationMs = duration;
@@ -257,24 +265,13 @@ void menuHandler::FrequencySlotPicker()
     optionsEnumArray[options++] = 0;
 
     // Calculate number of channels (copied from RadioInterface::applyModemConfig())
-
     meshtastic_Config_LoRaConfig &loraConfig = config.lora;
     double bw = loraConfig.use_preset ? modemPresetToBwKHz(loraConfig.modem_preset, myRegion->wideLora)
                                       : bwCodeToKHz(loraConfig.bandwidth);
 
     uint32_t numChannels = 0;
     if (myRegion) {
-        // Match RadioInterface::applyModemConfig(): include padding, add spacing in numerator, and use round()
-        const double spacing = myRegion->profile->spacing;
-        const double padding = myRegion->profile->padding;
-        const double channelBandwidthMHz = bw / 1000.0;
-        const double numerator = (myRegion->freqEnd - myRegion->freqStart) + spacing;
-        const double denominator = spacing + (padding * 2) + channelBandwidthMHz;
-        if (denominator > 0.0) {
-            numChannels = static_cast<uint32_t>(round(numerator / denominator));
-        } else {
-            LOG_WARN("Invalid region configuration: non-positive channel spacing/width");
-        }
+        numChannels = (uint32_t)floor((myRegion->freqEnd - myRegion->freqStart) / (myRegion->spacing + (bw / 1000.0)));
     } else {
         LOG_WARN("Region not set, cannot calculate number of channels");
         return;
@@ -310,6 +307,7 @@ void menuHandler::FrequencySlotPicker()
 
         config.lora.channel_num = selected;
         service->reloadConfig(SEGMENT_CONFIG);
+        rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
     };
 
     screen->showOverlayBanner(bannerOptions);
@@ -348,6 +346,7 @@ void menuHandler::radioPresetPicker()
             config.lora.channel_num = 0;        // Reset to default channel for the preset
             config.lora.override_frequency = 0; // Clear any custom frequency
             service->reloadConfig(SEGMENT_CONFIG);
+            rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
         });
 
     screen->showOverlayBanner(bannerOptions);
@@ -1223,11 +1222,9 @@ void menuHandler::positionBaseMenu()
     };
 
     constexpr size_t baseCount = sizeof(baseOptions) / sizeof(baseOptions[0]);
-    static std::array<const char *, baseCount> baseLabels{};
-#if !MESHTASTIC_EXCLUDE_ACCELEROMETER
     constexpr size_t calibrateCount = sizeof(calibrateOptions) / sizeof(calibrateOptions[0]);
+    static std::array<const char *, baseCount> baseLabels{};
     static std::array<const char *, calibrateCount> calibrateLabels{};
-#endif
 
     auto onSelection = [](const PositionMenuOption &option, int) -> void {
         if (option.action == OptionsAction::Back) {
@@ -1253,11 +1250,9 @@ void menuHandler::positionBaseMenu()
             screen->runNow();
             break;
         case PositionAction::CompassCalibrate:
-#if !MESHTASTIC_EXCLUDE_ACCELEROMETER
             if (accelerometerThread) {
                 accelerometerThread->calibrate(30);
             }
-#endif
             break;
         case PositionAction::GPSSmartPosition:
             menuQueue = GpsSmartPositionMenu;
@@ -1275,15 +1270,11 @@ void menuHandler::positionBaseMenu()
     };
 
     BannerOverlayOptions bannerOptions;
-#if !MESHTASTIC_EXCLUDE_ACCELEROMETER
     if (accelerometerThread) {
         bannerOptions = createStaticBannerOptions("GPS Action", calibrateOptions, calibrateLabels, onSelection);
     } else {
         bannerOptions = createStaticBannerOptions("GPS Action", baseOptions, baseLabels, onSelection);
     }
-#else
-    bannerOptions = createStaticBannerOptions("GPS Action", baseOptions, baseLabels, onSelection);
-#endif
 
     screen->showOverlayBanner(bannerOptions);
 }
@@ -2213,9 +2204,9 @@ void menuHandler::traceRouteMenu()
 void menuHandler::testMenu()
 {
 
-    enum optionsNumbers { Back, NumberPicker, ShowChirpy, TestAnnounce };
-    static const char *optionsArray[5] = {"Back"};
-    static int optionsEnumArray[5] = {Back};
+    enum optionsNumbers { Back, NumberPicker, ShowChirpy };
+    static const char *optionsArray[4] = {"Back"};
+    static int optionsEnumArray[4] = {Back};
     int options = 1;
 
     optionsArray[options] = "Number Picker";
@@ -2223,10 +2214,6 @@ void menuHandler::testMenu()
 
     optionsArray[options] = screen->isFrameHidden("chirpy") ? "Show Chirpy" : "Hide Chirpy";
     optionsEnumArray[options++] = ShowChirpy;
-#ifdef HAS_I2S
-    optionsArray[options] = "Test Announce";
-    optionsEnumArray[options++] = TestAnnounce;
-#endif
 
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Hidden Test Menu";
@@ -2241,10 +2228,6 @@ void menuHandler::testMenu()
             screen->toggleFrameVisibility("chirpy");
             screen->setFrames(Screen::FOCUS_SYSTEM);
 
-        } else if (selected == TestAnnounce) {
-#ifdef HAS_I2S
-            audioThread->readAloud("This is a test of the emergency broadcast system. This is only a test.");
-#endif
         } else {
             menuQueue = SystemBaseMenu;
             screen->runNow();

src/graphics/fonts/OLEDDisplayFontsRU.cpp

@@ -10,7 +10,7 @@ const uint8_t ArialMT_Plain_10_RU[] PROGMEM = {
     0xE0, // Number of chars: 224
 
     // Jump Table:
-    0xFF, 0xFF, 0x00, 0x03, // 32
+    0xFF, 0xFF, 0x00, 0x0A, // 32
     0x00, 0x00, 0x04, 0x03, // 33
     0x00, 0x04, 0x05, 0x04, // 34
     0x00, 0x09, 0x09, 0x06, // 35
@@ -1766,4 +1766,4 @@ const uint8_t ArialMT_Plain_24_RU[] PROGMEM = {
     0x3F, // 255
 };
 
-#endif // OLED_RU
+#endif // OLED_RU

src/graphics/fonts/OLEDDisplayFontsUA.cpp

@@ -9,7 +9,7 @@ const uint8_t ArialMT_Plain_10_UA[] PROGMEM = {
     0x20, // First char: 32
     0xE0, // Number of chars: 224
     // Jump Table:
-    0xFF, 0xFF, 0x00, 0x03, // 32
+    0xFF, 0xFF, 0x00, 0x0A, // 32
     0x00, 0x00, 0x04, 0x03, // 33
     0x00, 0x04, 0x05, 0x04, // 34
     0x00, 0x09, 0x09, 0x06, // 35
@@ -1924,4 +1924,4 @@ const uint8_t ArialMT_Plain_24_UA[] PROGMEM = {
     0xFF, // 1103
 };
 
-#endif // OLED_UA
+#endif // OLED_UA

src/graphics/niche/InkHUD/Applet.h

@@ -15,7 +15,6 @@
 
 #include <GFX.h> // GFXRoot drawing lib
 
-#include "mesh/MeshModule.h"
 #include "mesh/MeshTypes.h"
 
 #include "./AppletFont.h"

src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.cpp

@@ -177,8 +177,24 @@ static void applyLoRaRegion(meshtastic_Config_LoRaConfig_RegionCode region)
     auto changes = SEGMENT_CONFIG;
 
 #if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN || MESHTASTIC_EXCLUDE_PKI)
-    if (crypto) {
-        crypto->ensurePkiKeys(config.security, owner);
+    if (!owner.is_licensed) {
+        bool keygenSuccess = false;
+
+        if (config.security.private_key.size == 32) {
+            if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
+                keygenSuccess = true;
+            }
+        } else {
+            crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes);
+            keygenSuccess = true;
+        }
+
+        if (keygenSuccess) {
+            config.security.public_key.size = 32;
+            config.security.private_key.size = 32;
+            owner.public_key.size = 32;
+            memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
+        }
     }
 #endif
 

src/graphics/tftSetup.cpp

@@ -16,10 +16,6 @@
 
 DeviceScreen *deviceScreen = nullptr;
 
-#ifndef TFT_TASK_STACK_SIZE
-#define TFT_TASK_STACK_SIZE 16384
-#endif
-
 #ifdef ARCH_ESP32
 // Get notified when the system is entering light sleep
 CallbackObserver<DeviceScreen, void *> tftSleepObserver =
@@ -131,7 +127,7 @@ void tftSetup(void)
 #ifdef ARCH_ESP32
         tftSleepObserver.observe(&notifyLightSleep);
         endSleepObserver.observe(&notifyLightSleepEnd);
-        xTaskCreatePinnedToCore(tft_task_handler, "tft", TFT_TASK_STACK_SIZE, NULL, 1, NULL, 0);
+        xTaskCreatePinnedToCore(tft_task_handler, "tft", 10240, NULL, 1, NULL, 0);
 #elif defined(ARCH_PORTDUINO)
         std::thread *tft_task = new std::thread([] { tft_task_handler(); });
 #endif

src/input/InputBroker.cpp

@@ -34,7 +34,7 @@
 
 #if defined(BUTTON_PIN_TOUCH)
 ButtonThread *TouchButtonThread = nullptr;
-#if defined(PIN_EINK_EN)
+#if defined(TTGO_T_ECHO_PLUS) && defined(PIN_EINK_EN)
 static bool touchBacklightWasOn = false;
 static bool touchBacklightActive = false;
 #endif
@@ -220,8 +220,8 @@ void InputBroker::Init()
     };
     touchConfig.singlePress = INPUT_BROKER_NONE;
     touchConfig.longPress = INPUT_BROKER_BACK;
-#if defined(PIN_EINK_EN)
-    // Touch pad drives the backlight on devices with e-ink backlight pin
+#if defined(TTGO_T_ECHO_PLUS) && defined(PIN_EINK_EN)
+    // On T-Echo Plus the touch pad should only drive the backlight, not UI navigation/sounds
     touchConfig.longPress = INPUT_BROKER_NONE;
     touchConfig.suppressLeadUpSound = true;
     touchConfig.onPress = []() {
@@ -299,7 +299,6 @@ void InputBroker::Init()
     // Buttons. Moved here cause we need NodeDB to be initialized
     // If your variant.h has a BUTTON_PIN defined, go ahead and define BUTTON_ACTIVE_LOW and BUTTON_ACTIVE_PULLUP
     UserButtonThread = new ButtonThread("UserButton");
-#if !MESHTASTIC_EXCLUDE_SCREEN
     if (screen) {
         ButtonConfig userConfig;
         userConfig.pinNumber = (uint8_t)_pinNum;
@@ -318,9 +317,7 @@ void InputBroker::Init()
         userConfig.longPressTime = 500;
         userConfig.longLongPress = INPUT_BROKER_SHUTDOWN;
         UserButtonThread->initButton(userConfig);
-    } else
-#endif
-    {
+    } else {
         ButtonConfig userConfigNoScreen;
         userConfigNoScreen.pinNumber = (uint8_t)_pinNum;
         userConfigNoScreen.activeLow = BUTTON_ACTIVE_LOW;
@@ -382,13 +379,11 @@ void InputBroker::Init()
     }
 #endif // HAS_BUTTON
 #if ARCH_PORTDUINO
-    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
-        if (portduino_config.i2cdev != "") {
-            seesawRotary = new SeesawRotary("SeesawRotary");
-            if (!seesawRotary->init()) {
-                delete seesawRotary;
-                seesawRotary = nullptr;
-            }
+    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR && portduino_config.i2cdev != "") {
+        seesawRotary = new SeesawRotary("SeesawRotary");
+        if (!seesawRotary->init()) {
+            delete seesawRotary;
+            seesawRotary = nullptr;
         }
         aLinuxInputImpl = new LinuxInputImpl();
         aLinuxInputImpl->init();

src/main.cpp

@@ -123,7 +123,7 @@ void printPartitionTable()
 #include "AmbientLightingThread.h"
 #include "PowerFSMThread.h"
 
-#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C && !MESHTASTIC_EXCLUDE_ACCELEROMETER
+#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
 #include "motion/AccelerometerThread.h"
 AccelerometerThread *accelerometerThread = nullptr;
 #endif
@@ -657,7 +657,7 @@ void setup()
     }
 #endif
 
-#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_ACCELEROMETER
+#if !defined(ARCH_STM32WL)
     auto acc_info = i2cScanner->firstAccelerometer();
     accelerometer_found = acc_info.type != ScanI2C::DeviceType::NONE ? acc_info.address : accelerometer_found;
     LOG_DEBUG("acc_info = %i", acc_info.type);
@@ -737,7 +737,7 @@ void setup()
 #endif
 
 #if !MESHTASTIC_EXCLUDE_I2C
-#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_ACCELEROMETER
+#if !defined(ARCH_STM32WL)
     if (acc_info.type != ScanI2C::DeviceType::NONE) {
         accelerometerThread = new AccelerometerThread(acc_info.type);
     }

src/main.h

@@ -65,7 +65,7 @@ extern UdpMulticastHandler *udpHandler;
 // Global Screen singleton.
 extern graphics::Screen *screen;
 
-#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C && !MESHTASTIC_EXCLUDE_ACCELEROMETER
+#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
 #include "motion/AccelerometerThread.h"
 extern AccelerometerThread *accelerometerThread;
 #endif

src/mesh/CryptoEngine.cpp

@@ -61,33 +61,6 @@ bool CryptoEngine::regeneratePublicKey(uint8_t *pubKey, uint8_t *privKey)
     }
     return true;
 }
-
-bool CryptoEngine::ensurePkiKeys(meshtastic_Config_SecurityConfig &security, meshtastic_User &user)
-{
-    if (user.is_licensed) {
-        return false;
-    }
-
-    bool keygenSuccess = false;
-    if (security.private_key.size == 32) {
-        if (regeneratePublicKey(security.public_key.bytes, security.private_key.bytes)) {
-            keygenSuccess = true;
-        }
-    } else {
-        LOG_INFO("Generate new PKI keys");
-        generateKeyPair(security.public_key.bytes, security.private_key.bytes);
-        keygenSuccess = true;
-    }
-
-    if (keygenSuccess) {
-        security.public_key.size = 32;
-        security.private_key.size = 32;
-        user.public_key.size = 32;
-        memcpy(user.public_key.bytes, security.public_key.bytes, 32);
-    }
-
-    return keygenSuccess;
-}
 #endif
 
 /**