Merge branch 'develop' into Temp_Offset

* Delete unused clearNVS() (last used in commit 761804b1).

* virtual methods: add 'override' to ensure we get the signature right.

This is a safety net for pioarduino/NimBLE work where there's multiple
similar variants of the same method (eg. onConnect) and it's easy to get
the wrong one and accidentally miss a callback.

.claude/commands/diagnose.md

@@ -24,7 +24,12 @@ Call the meshtastic MCP tool bundle and format a structured health report for on
    - `mcp__meshtastic__get_config(section="lora", port=<p>)` — region, preset, channel_num, tx_power, hop_limit.
    - Optionally, if the device seems unhappy (fails to connect, `num_nodes==1` when ≥2 are plugged in, missing firmware*version), open a short firmware log window: `mcp__meshtastic__serial_open(port=<p>, env=<inferred-env>)`, wait 3s, `serial_read(session_id=<s>, max_lines=100)`, `serial_close(session_id=<s>)`. The env should be inferred from the VID map in `mcp-server/run-tests.sh` (nrf52 → rak4631, esp32s3 → heltec-v3) unless `MESHTASTIC_MCP_ENV*<ROLE>` is set.
 
-4. **Render per-device report** as:
+4. **Hub health** (call once, not per-device): `mcp__meshtastic__uhubctl_list()` — enumerates every USB hub the host can see. Note which hubs advertise `ppps=true` and which hub hosts each Meshtastic device (cross-reference by VID). Flag it in the report if:
+   - No hub advertises PPPS → `tests/recovery/` can't run on this setup; hard-recovery via `uhubctl_cycle` isn't available.
+   - A Meshtastic device is on a non-PPPS hub → note it; operator may want to move the device to a PPPS hub to unlock auto-recovery.
+   - `uhubctl_list` raises `ConfigError: uhubctl not found` → just say `uhubctl not installed` in the report; don't treat as a fault.
+
+5. **Render per-device report** as:
 
    ```text
    [nrf52 @ /dev/cu.usbmodem1101]      fw=2.7.23.bce2825, hw=RAK4631
@@ -33,20 +38,22 @@ Call the meshtastic MCP tool bundle and format a structured health report for on
      tx_power    : 30 dBm, hop_limit=3
      peers       : 1 (esp32s3 0x433c2428, pubkey ✓, SNR 6.0 / RSSI -24 dBm)
      primary ch  : McpTest
+     hub         : 1-1.3 port 2 (PPPS, uhubctl-controllable)
      firmware    : no panics in last 3s; NodeInfoModule emitted 2 broadcasts
    ```
 
-   Keep it scannable. If a field is missing or abnormal (no pubkey for a known peer, region=UNSET, num_nodes inconsistent with the hub), flag it inline with a short `⚠︎ <one-line reason>`.
+   Keep it scannable. If a field is missing or abnormal (no pubkey for a known peer, region=UNSET, num_nodes inconsistent with the hub, device on non-PPPS hub), flag it inline with a short `⚠︎ <one-line reason>`.
 
-5. **Cross-device correlation** (only when >1 device is inspected):
+6. **Cross-device correlation** (only when >1 device is inspected):
    - Do both sides see each other in `nodesByNum`? If one does and the other doesn't, that's asymmetric NodeInfo — flag it.
    - Do the LoRa configs match? (region, channel_num, modem_preset should all agree; mismatch = no mesh)
    - Do the primary channel NAMES match? Mismatch = different PSK = no decode.
 
-6. **Suggest next actions only for specific, recognisable failure modes**:
+7. **Suggest next actions only for specific, recognisable failure modes**:
    - Stale PKI pubkey one-way → "run `/test tests/mesh/test_direct_with_ack.py` — the retry + nodeinfo-ping heals this in the test path."
    - Region mismatch → "re-bake one side via `./mcp-server/run-tests.sh --force-bake`."
-   - Device unreachable → point at touch_1200bps + the CP2102-wedged-driver note in run-tests.sh.
+   - Device unreachable, reachable via DFU → `touch_1200bps(port=...)` + `pio_flash`. If not even DFU responds AND the device is on a PPPS hub, escalate to `uhubctl_cycle(role=..., confirm=True)`.
+   - CP2102-wedged-driver on macOS → see the note in `run-tests.sh`.
 
 ## What NOT to do
 

.claude/commands/repro.md

@@ -44,7 +44,8 @@ Re-run a single pytest node ID N times in isolation, track pass rate, and surfac
    - **LoRa airtime collision** → pass rate improves with fewer concurrent transmitters; propose a `time.sleep` gap or retry bump in the test body.
    - **PKI key staleness** → fails on first attempt, passes after self-heal; existing retry loop in `test_direct_with_ack.py` handles this.
    - **NodeInfo cooldown** → `Skip send NodeInfo since we sent it <600s ago` in fail-only logs; needs `broadcast_nodeinfo_ping()` warmup.
-   - **Hardware-specific** (one direction fails, other passes; one device's firmware is older; driver wedged) → specific recovery pointer.
+   - **Hardware-specific** (one direction fails, other passes; one device's firmware is older; driver wedged) → specific recovery pointer. For a device that's wedged past `touch_1200bps`, the next escalation is `uhubctl_cycle(role=..., confirm=True)` to hard-power-cycle its hub port (requires `uhubctl` installed).
+   - **Device went dark mid-run** → fails from some attempt onward, never recovers, firmware log stops arriving. Almost always hardware: a Guru crash + frozen CDC. Hard-power-cycle via `uhubctl_cycle(role=..., confirm=True)` before the next iteration; if that also fails, escalate to replug.
    - **Genuinely unknown** → say so; don't invent a root cause.
 
 7. **Report back** with:

.claude/commands/test.md

@@ -19,16 +19,21 @@ Run `mcp-server/run-tests.sh` and make sense of the output so the operator doesn
 
 2. **Read the pre-flight header.** First ~6 lines print the detected hub (role → port → env). If that line reads `detected hub : (none)`, the wrapper will narrow to `tests/unit` only — say so explicitly in your summary so the operator knows hardware tiers were skipped.
 
-3. **On pass**: one-line summary of the form `N passed, M skipped in <duration>`. Don't enumerate the 52 test names — the user can read those. Do mention if any test was SKIPPED for a NON-placeholder reason (e.g. "role not present on hub" is worth flagging).
+3. **On pass**: one-line summary of the form `N passed, M skipped in <duration>`. Don't enumerate the test names — the user can read those. Do mention any SKIPPED tests and name the cause:
+   - `"role not present on hub"` → device unplugged; operator knows to reconnect.
+   - `"firmware not baked with USERPREFS_UI_TEST_LOG"` → tests/ui skipped because the macro isn't in firmware yet; suggest `--force-bake`.
+   - `"uhubctl not installed"` → tests/recovery + peer-offline skipped; suggest `brew install uhubctl` / `apt install uhubctl`.
+   - `"no PPPS-capable hubs detected"` → tests/recovery skipped because the hub doesn't support per-port power; the tier will never run on that setup.
+   - `"opencv-python-headless is not installed"` → tests/ui auto-deselected by run-tests.sh; suggest `pip install -e 'mcp-server/.[ui]'`.
 
-4. **On failure**: for every FAILED test, open `mcp-server/tests/report.html` and extract the `Meshtastic debug` section for that test. pytest-html embeds the firmware log stream + device state dump there; the 200-line firmware log tail is usually enough to explain the failure. Summarise: which test, one-line assertion message, the firmware log lines that matter (things like `PKI_UNKNOWN_PUBKEY`, `Skip send NodeInfo`, `Error=`, `Guru Meditation`, `assertion failed`).
+4. **On failure**: for every FAILED test, open `mcp-server/tests/report.html` and extract the `Meshtastic debug` section for that test. pytest-html embeds the firmware log stream + device state dump there; the 200-line firmware log tail is usually enough to explain the failure. Summarise: which test, one-line assertion message, the firmware log lines that matter (things like `PKI_UNKNOWN_PUBKEY`, `Skip send NodeInfo`, `Error=`, `Guru Meditation`, `assertion failed`). For UI-tier failures also glance at `mcp-server/tests/ui_captures/<session>/<test>/transcript.md` — it records each step's frame + OCR.
 
 5. **Classify the failure** as one of:
    - **Transient/flake**: LoRa collision, timing-sensitive assertion, first-attempt NAK + successful retry pattern. Propose `/repro <test_node_id>` to confirm.
-   - **Environmental**: device unreachable, port busy, CP2102 driver wedged. Suggest the specific recovery (replug USB, `touch_1200bps`, check `git status userPrefs.jsonc`).
+   - **Environmental**: device unreachable, port busy, CP2102 driver wedged. Suggest the specific recovery in escalation order: (a) replug USB, (b) `touch_1200bps(port=...)` + `pio_flash` for nRF52 DFU, (c) `uhubctl_cycle(role="nrf52", confirm=True)` when a device is fully wedged past DFU (needs `uhubctl` installed — `baked_single`'s auto-recovery hook does this once automatically). Also check `git status userPrefs.jsonc`.
    - **Regression**: same assertion fails repeatedly, firmware log shows a new/unusual error. Surface the diff between expected and observed, identify the module likely responsible.
 
-6. **Never run destructive recovery automatically.** If a failure looks like it needs a reflash, factory*reset, or USB replug, \_describe what to do* — don't execute. The operator decides.
+6. **Never run destructive recovery automatically.** If a failure looks like it needs a reflash, factory*reset, `uhubctl_cycle`, or USB replug, \_describe what to do* — don't execute. The operator decides.
 
 ## Arguments handling
 

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -75,11 +75,11 @@ body:
   - type: checkboxes
     id: mui
     attributes:
-      label: Is this bug report about any UI component firmware like InkHUD or Meshtatic UI (MUI)?
+      label: Is this bug report about any UI (https://meshtastic.org/docs/configuration/device-uis/) component firmware?
       options:
-        - label: Meshtastic UI aka MUI colorTFT
-        - label: InkHUD ePaper
-        - label: OLED slide UI on any display
+        - label: Meshtastic UI aka MUI
+        - label: InkHUD
+        - label: BaseUI
 
   - type: input
     id: version

.github/copilot-instructions.md

@@ -70,6 +70,70 @@ PKI (Public Key Infrastructure) messages have special handling:
 - Accepted on a special "PKI" channel
 - Allow encrypted DMs between nodes that discovered each other on downlink-enabled channels
 
+## Encryption & Key Management
+
+Meshtastic packets on the air are typically encrypted one of two ways: the **per-channel symmetric** layer (AES-CTR with a shared PSK) for broadcasts and channel traffic, and the **per-peer PKI** layer (X25519 ECDH → AES-256-CCM) for direct messages and remote admin. A channel with a 0-byte PSK (or Ham mode, which wipes PSKs) transmits cleartext — see the size table below. Both are implemented in `src/mesh/CryptoEngine.cpp`; the send/receive dispatch lives in `src/mesh/Router.cpp`; admin authorization lives in `src/modules/AdminModule.cpp`.
+
+### High-level model
+
+- **Channels** are symmetric rooms: anyone with the PSK can read any message on the channel. Channel 0 is the "primary" channel and ships with the short-form default PSK on factory devices, forming the public mesh most users join. (The LoRa modem preset `LONG_FAST` lives on `config.lora.modem_preset` and is an independent field — don't conflate "channel 0 default PSK" with the modem preset name.)
+- **DMs** addressed to a single node require PKI so that other holders of the channel PSK can't read them. Outside Ham mode, Meshtastic does not fall back to channel-symmetric encryption when the destination public key is unknown.
+- **Remote admin** is a DM carrying an `AdminMessage`. The receiver only acts on it if the sender's public key is on its allowlist (`config.security.admin_key[0..2]`).
+- **Ham mode** (`owner.is_licensed=true`, where `owner` is the local `meshtastic_User` record) disables PKI entirely and sends cleartext — FCC Part 97 prohibits encryption on amateur bands.
+- **No ratchet, no session.** Every packet is encrypted from scratch — a stateless design that matches the high-loss, store-and-forward nature of LoRa.
+
+### Symmetric channel encryption (AES-CTR)
+
+`CryptoEngine::encryptPacket` / `decrypt` / `encryptAESCtr` in `src/mesh/CryptoEngine.cpp`.
+
+- **Cipher**: AES-CTR, AES-128 or AES-256 depending on key length. Same routine in both directions (CTR is a stream cipher, so encrypt == decrypt).
+- **Key**: `ChannelSettings.psk` bytes. Size semantics:
+  - **0 bytes** → no encryption, cleartext on the air
+  - **1 byte** → short-form index into the well-known `defaultpsk[]` in `src/mesh/Channels.h`. Index 0 = cleartext; 1 = defaultpsk unchanged; 2..255 = defaultpsk with its last byte incremented by (index − 1). This is what the CLI's `--ch-set psk default` produces.
+  - **16 bytes** → raw AES-128 key
+  - **32 bytes** → raw AES-256 key
+  - **2..15 bytes** → zero-padded to 16 and used as AES-128 (with a warn log); **17..31 bytes** → zero-padded to 32 and used as AES-256 (with a warn log). Defensive fallback for malformed PSK input, not something to rely on.
+- **Nonce (128 bit)**: `packet_id` (u64 LE) ‖ `from_node` (u32 LE) ‖ `block_counter` (u32, starts at 0). Built in `CryptoEngine::initNonce`.
+- **No AEAD**: channel packets carry no MAC, so the channel-hash byte is not an integrity or authenticity check. `Channels::getHash` is a 1-byte XOR-derived hint over the channel name bytes and PSK bytes that helps receivers pick a candidate channel/PSK for decryption. Because it is only a small hint and collisions are easy to find, it should be described purely as a PSK-selection aid, not as a security filter an attacker cannot bypass.
+- **Channel 0 is special in one way only**: it's the channel the Router attempts PKI decryption on before falling through to AES-CTR. Non-zero channels always go straight to AES-CTR.
+
+### PKI encryption for DMs (X25519 ECDH + AES-256-CCM)
+
+`CryptoEngine::encryptCurve25519` / `decryptCurve25519` in `src/mesh/CryptoEngine.cpp`.
+
+- **Keypair**: Curve25519 (aka X25519), 32-byte public + 32-byte private. Stored in `config.security.public_key` / `private_key`; the public half is mirrored into `owner.public_key` so it rides along in NodeInfo broadcasts and propagates through the mesh like any other identity field.
+- **Key generation** (`generateKeyPair`): stirs `HardwareRNG::fill()` (64 B from platform TRNG when available), the 16-byte `myNodeInfo.device_id`, and a call to `random()` into the rweather/Crypto library's software RNG, then `Curve25519::dh1`. `regeneratePublicKey` recomputes the public half from a known private (used when restoring from backup).
+- **Keygen entry points**: at boot, `NodeDB` calls `generateKeyPair` (or `regeneratePublicKey` when a stored private key is present and passes a low-entropy check) **directly** when `!owner.is_licensed` and `config.lora.region != UNSET`. `ensurePkiKeys` wraps the same logic for runtime/admin flows — it's the path `AdminModule::handleSetConfig` runs when first assigning a valid region or when security config is written; **do not assume it's the universal boot-time gate**, because the NodeDB path bypasses it.
+- **Handshake**: `Curve25519::dh2(local_private, remote_public) → 32-byte shared secret → SHA-256 → 32-byte AES-256 key`. Recomputed per packet. The SHA-256 step is effectively a KDF over the raw ECDH output.
+- **Cipher**: AES-256-CCM via `aes_ccm_ae` / `aes_ccm_ad` (`src/mesh/aes-ccm.cpp`). MAC length (the `M` parameter) is **8 bytes**. No AAD — the MAC covers ciphertext only.
+- **Nonce (13 bytes / 104 bit)**: `aes_ccm_ae`/`aes_ccm_ad` use a 13-byte CCM nonce (`L = 2` is hardcoded in `src/mesh/aes-ccm.cpp`), not a 16-byte nonce. For PKI packets, `CryptoEngine::initNonce(fromNode, packetNum, extraNonce)` starts from the usual packet-derived nonce material, then overwrites nonce bytes `4..7` with a fresh 32-bit `extraNonce = random()`. The effective nonce bytes are therefore: bytes `0..3` = `packet_id`, bytes `4..7` = transmitted `extraNonce`, bytes `8..11` = `from_node`, byte `12` = `0x00`. The receiver reconstructs the same 13-byte nonce from the packet metadata plus the appended `extraNonce`.
+- **Wire overhead**: 12 bytes appended to the ciphertext = 8-byte MAC ‖ 4-byte extraNonce. Defined as `MESHTASTIC_PKC_OVERHEAD = 12` in `src/mesh/RadioInterface.h`. Only the 4-byte `extraNonce` is sent; the rest of the 13-byte CCM nonce is reconstructed from packet fields as described above. The Router's send path checks this overhead against `MAX_LORA_PAYLOAD_LEN` before committing to PKI.
+- **Send selection** (`Router::send`): the sender enters the PKI path when **all** hold — we're the originator AND not Ham mode AND not Portduino simradio AND not on the `serial`/`gpio` channels (unless the packet is already marked `pki_encrypted`) AND `config.security.private_key.size == 32` AND destination is a single node (not broadcast) AND the portnum isn't infrastructure. `TRACEROUTE_APP`, `NODEINFO_APP`, `ROUTING_APP`, and `POSITION_APP` are routed through channel encryption even when DMed (these need to be readable by relaying peers). Once on the PKI path, if the destination's public key isn't in our NodeDB the send **fails** with `PKI_SEND_FAIL_PUBLIC_KEY` — it does not silently fall back to channel encryption. If the client explicitly set `pki_encrypted=true` and any condition blocks PKI, the send fails with `PKI_FAILED`.
+- **Receive selection** (`Router::perhapsDecode`): try PKI decrypt first when `channel == 0` AND `isToUs(p)` AND not broadcast AND both peers have public keys in NodeDB AND `rawSize > MESHTASTIC_PKC_OVERHEAD`. On success the packet gets `pki_encrypted=true` stamped and the sender's public key copied into `p->public_key` for downstream authorization.
+
+### Remote admin authorization
+
+Implemented in `src/modules/AdminModule.cpp` → `handleReceivedProtobuf`. The authorization check runs in this order:
+
+1. **Response messages** — if `messageIsResponse(r)` is true (the payload is a response to one of our earlier admin requests), it's accepted without any further check. The in-file comment flags this as a known-untightened gap: a stricter implementation would remember which `public_key` we last queried and reject responses that don't match.
+2. **Local admin** — `mp.from == 0` (phone app over BLE, serial CLI, internal module); never travels over the air. **Rejected** if `config.security.is_managed` is true, because managed devices expect admin to arrive over the air through an authorized remote path.
+3. **Legacy admin channel (deprecated)** — the packet arrived on a channel named literally `"admin"`. Gated by `config.security.admin_channel_enabled`; returns `NOT_AUTHORIZED` if the flag is false. Kept for backward compatibility; new deployments should use PKI admin.
+4. **PKI admin (preferred for remote)** — `mp.pki_encrypted == true` AND `mp.public_key` matches one of `config.security.admin_key[0..2]` (up to three authorized 32-byte Curve25519 public keys, typically copied from the admin node's own `user.public_key`).
+5. **Fallthrough** → `NOT_AUTHORIZED`.
+
+On top of authorization, any remote admin message that **mutates** state (not a request, not a response) also has to pass a session-key check (`checkPassKey`): the client must first pull a fresh 8-byte `session_passkey` via `get_admin_session_key_request`, then echo that passkey back in the mutating message. The device rotates the passkey after 150 s and rejects values older than 300 s — a narrow anti-replay window on top of the PKI layer.
+
+`config.security.is_managed = true` disables **local** admin writes (`mp.from == 0` is rejected). It does not by itself force every admin action through PKI — the legacy `"admin"` channel still authorizes remote admin when `config.security.admin_channel_enabled == true`. The AdminModule refuses to persist `is_managed=true` unless at least one `admin_key` is populated — a deliberate guard against operators locking themselves out.
+
+### Key-rotation hazards (actions that invalidate peers)
+
+- **`factory_reset_device`** (the "full" variant, calls `NodeDB::factoryReset(eraseBleBonds=true)`) → **wipes** the X25519 private key; a fresh keypair is generated on the next region-set. Every existing peer holds the old public key, so DMs to this node silently fail PKI decrypt until every peer re-exchanges NodeInfo.
+- **`factory_reset_config`** (the "partial" variant, calls `NodeDB::factoryReset()` with `eraseBleBonds=false`) → **preserves** the X25519 private key in `installDefaultConfig(preserveKey=true)`; the public key is zeroed and gets rebuilt from the preserved private key on the next boot via the NodeDB path's `regeneratePublicKey` call. Identity is preserved and the mesh does not need to re-exchange keys.
+- **`region=UNSET → valid region`** → `ensurePkiKeys` runs inside the same `handleSetConfig` path; missing keys get generated at that moment.
+- **Ham mode transitions** — entering Ham mode (`user.is_licensed=true`) runs `Channels::ensureLicensedOperation`, which **wipes every channel PSK** (all traffic becomes cleartext) and disables the legacy admin channel. The X25519 private key is preserved on the device but not used because `Router::send` skips PKI when `owner.is_licensed` is true. Leaving Ham mode re-enables PKI with the preserved keypair but does not restore the wiped channel PSKs — the operator has to re-set them.
+- **Channel 0 PSK change** → every peer must re-learn the channel hash; cached NodeInfo becomes temporarily unreachable until the next broadcast.
+- **`security.private_key` blanked via admin** → regenerates both halves (unless in Ham mode) and propagates the new public key via NodeInfo.
+
 ## Project Structure
 
 ```
@@ -80,7 +144,7 @@ firmware/
 │   │   ├── NodeDB.*       # Node database management
 │   │   ├── Router.*       # Packet routing
 │   │   ├── Channels.*     # Channel management
-│   │   ├── CryptoEngine.* # AES-CCM encryption
+│   │   ├── CryptoEngine.* # AES-CTR (channels) + X25519 ECDH→AES-256-CCM (PKI for DMs/admin)
 │   │   ├── *Interface.*   # Radio interface implementations
 │   │   ├── api/           # WiFi/Ethernet server APIs (ServerAPI, PacketAPI)
 │   │   ├── http/          # HTTP server (WebServer, ContentHandler)
@@ -296,6 +360,23 @@ Key defines in variant.h:
 
 ## Build System
 
+## Agent Tooling Baseline
+
+Mirror counterpart: `AGENTS.md` under **Agent Tooling Baseline**.
+
+To reduce avoidable agent mistakes, assume these tools are available (or install them before significant repo work):
+
+- **Required CLI basics**: `bash`, `git`, `find`, `grep`, `sed`, `awk`, `xargs`
+- **Strongly recommended**: `rg` (ripgrep) for fast file/text search, `jq` for JSON processing
+- **Build/test tools**: `python3`, `pip`, virtualenv (`python3 -m venv`), `platformio` (`pio`)
+- **Containerized native testing**: `docker` (especially important on macOS / non-Linux hosts)
+
+Fallback expectations for agents:
+
+- If `rg` is unavailable, use `find` + `grep` instead of failing.
+- For native tests on hosts without Linux deps, prefer `./bin/test-native-docker.sh`.
+- The simulator helper script is `./bin/test-simulator.sh`.
+
 Uses **PlatformIO** with custom scripts:
 
 - `bin/platformio-pre.py` - Pre-build script
@@ -448,6 +529,8 @@ Run with: `pio test -e native`
 
 Simulation testing: `bin/test-simulator.sh`
 
+Quick entry point for new test modules: `test/README.md` (native unit-test authoring guide, skeleton, pitfalls, and setup checklist).
+
 ### Hardware-in-the-loop tests (`mcp-server/tests/`)
 
 Separate pytest suite that exercises real USB-connected Meshtastic devices. See the **MCP Server & Hardware Test Harness** section below for invocation, tier layout, and agent usage rules.
@@ -474,7 +557,7 @@ The repo registers the server via `.mcp.json` at the repo root — Claude Code p
 
 **One MCP call per port at a time.** `SerialInterface` holds an exclusive OS-level lock on the serial port for its lifetime. If a `serial_*` session is open on `/dev/cu.usbmodem101`, calling `device_info` on the same port will fail fast pointing at the active session. Sequence calls: open → read/mutate → close, then next device. Never parallelize tool calls on the same port.
 
-### MCP tool surface (~32 tools)
+### MCP tool surface (43 tools)
 
 Grouped by purpose. Full argument shapes in `mcp-server/README.md`; a few high-value signatures are called out here.
 
@@ -482,11 +565,13 @@ Grouped by purpose. Full argument shapes in `mcp-server/README.md`; a few high-v
 - **Build & flash**: `build`, `clean`, `pio_flash`, `erase_and_flash` (ESP32 only), `update_flash` (ESP32 OTA), `touch_1200bps`
 - **Serial sessions** (long-running, 10k-line ring buffer): `serial_open`, `serial_read`, `serial_list`, `serial_close`
 - **Device reads**: `device_info`, `list_nodes`
-- **Device writes** (all require `confirm=True`): `set_owner`, `get_config`, `set_config`, `get_channel_url`, `set_channel_url`, `send_text`, `reboot`, `shutdown`, `factory_reset`, `set_debug_log_api`
+- **Device writes**: `set_owner`, `get_config`, `set_config`, `get_channel_url`, `set_channel_url`, `send_text`, `send_input_event` (inject a button/key press via the firmware's InputBroker), `set_debug_log_api`; destructive/power-state writes require `confirm=True`: `reboot`, `shutdown`, `factory_reset`
 - **userPrefs admin** (build-time constants, not runtime config): `userprefs_get`, `userprefs_set`, `userprefs_reset`, `userprefs_manifest`, `userprefs_testing_profile`
 - **Vendor escape hatches**: `esptool_chip_info`, `esptool_erase_flash`, `esptool_raw`, `nrfutil_dfu`, `nrfutil_raw`, `picotool_info`, `picotool_load`, `picotool_raw`
+- **USB power control** (via `uhubctl`, per-port PPPS toggle): `uhubctl_list` (read-only), `uhubctl_power(action='on'|'off', confirm=True)`, `uhubctl_cycle(delay_s, confirm=True)`. Target by raw `(location, port)` or by `role` (`"nrf52"`, `"esp32s3"`); role lookup checks `MESHTASTIC_UHUBCTL_LOCATION_<ROLE>` + `_PORT_<ROLE>` env vars first, falls back to VID auto-detection.
+- **Observability** (UI tier + operator ad-hoc): `capture_screen(role, ocr=True)` — grabs a USB-webcam frame of the device OLED and optionally OCRs it. Requires `mcp-server[ui]` extras (`opencv-python-headless`, `easyocr`) and `MESHTASTIC_UI_CAMERA_DEVICE_<ROLE>` env var; falls through to a 1×1 black PNG `NullBackend` when unconfigured.
 
-`confirm=True` is a tool-level gate on top of whatever permission prompt your MCP host shows. **Don't bypass it** by asking the host to auto-approve — it exists specifically because MCP hosts sometimes remember "always allow this tool" and that's dangerous for `factory_reset` and `erase_and_flash`.
+`confirm=True` is a tool-level gate on top of whatever permission prompt your MCP host shows. **Don't bypass it** by asking the host to auto-approve — it exists specifically because MCP hosts sometimes remember "always allow this tool" and that's dangerous for `factory_reset`, `erase_and_flash`, `uhubctl_power(action='off')`, and `uhubctl_cycle`.
 
 ### Hardware test suite (`mcp-server/run-tests.sh`)
 
@@ -494,14 +579,16 @@ The wrapper auto-detects connected devices (VID → role map: `0x239A` → `nrf5
 
 Suite tiers (collected + run in this order via `pytest_collection_modifyitems`):
 
-1. `tests/unit/` — pure Python (boards parse, pio wrapper, userPrefs parse, testing profile). No hardware.
+1. `tests/unit/` — pure Python (boards parse, pio wrapper, userPrefs parse, testing profile, uhubctl parser). No hardware.
 2. `tests/test_00_bake.py` — flashes each detected device with current `userPrefs.jsonc` merged with the session's test profile. Has its own skip-if-already-baked check comparing region + primary channel to the session profile; skips cheaply on warm devices.
-3. `tests/mesh/` — multi-device mesh: bidirectional send, broadcast delivery, direct-with-ACK, mesh formation within 60s. Parametrized `[nrf52->esp32s3]` and `[esp32s3->nrf52]`.
+3. `tests/mesh/` — multi-device mesh: bidirectional send, broadcast delivery, direct-with-ACK, mesh formation within 60s. Parametrized `[nrf52->esp32s3]` and `[esp32s3->nrf52]`. Includes `test_peer_offline_recovery` which uses uhubctl to physically power off one peer mid-conversation (requires uhubctl; skips without).
 4. `tests/telemetry/` — `DEVICE_METRICS_APP` broadcast timing.
 5. `tests/monitor/` — boot-log panic check.
-6. `tests/fleet/` — PSK seed session isolation.
-7. `tests/admin/` — channel URL roundtrip, owner persistence across reboot.
-8. `tests/provisioning/` — region + modem + slot bake, admin key presence, `UNSET` region blocks TX, userPrefs survive factory reset.
+6. `tests/recovery/` — `uhubctl` power-cycle round-trip + NVS persistence across hard reset. Requires `uhubctl` installed and a PPPS-capable hub; entire tier auto-skips otherwise.
+7. `tests/ui/` — input-broker-driven screen navigation with camera + OCR evidence.
+8. `tests/fleet/` — PSK seed session isolation.
+9. `tests/admin/` — channel URL roundtrip, owner persistence across reboot.
+10. `tests/provisioning/` — region + modem + slot bake, admin key presence, `UNSET` region blocks TX, userPrefs survive factory reset.
 
 Invocation patterns:
 
@@ -586,15 +673,19 @@ If you're modifying `StreamAPI`, `PhoneAPI`, `NodeInfoModule`, or `userPrefs` fl
 
 ### Recovery playbooks
 
-| Symptom                                                    | First check                                                   | Fix                                                                                                                                                                        |
-| ---------------------------------------------------------- | ------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| `userPrefs.jsonc` dirty after test run                     | `git status --porcelain userPrefs.jsonc`                      | If non-empty, re-run `./mcp-server/run-tests.sh` once — the pre-flight self-heal restores from sidecar. If still dirty, `git checkout userPrefs.jsonc`.                    |
-| Port busy / wedged CP2102 on macOS                         | `lsof /dev/cu.usbserial-0001`                                 | Kill the holder. USB replug if the kernel still reports busy. Often a stale `pio device monitor` or zombie `meshtastic_mcp` process.                                       |
-| nRF52 appears unresponsive                                 | `list_devices` shows VID `0x239A` but `device_info` times out | `touch_1200bps(port=...)` drops it into the DFU bootloader → `pio_flash` re-installs.                                                                                      |
-| Multiple MCP server processes                              | `ps aux \| grep meshtastic_mcp` shows >1                      | Kill all but the one your MCP host spawned. Zombies hold ports and break tests.                                                                                            |
-| Mesh formation fails, one side sees peer but other doesn't | `/diagnose` (or `list_nodes` on both sides)                   | Asymmetric NodeInfo. `test_direct_with_ack` has a heal path; `/repro` it a few times. If persistent, both devices' clocks may be out of sync with their NodeInfo cooldown. |
-| "role not present on hub" in skip reasons                  | `list_devices`                                                | Expected if a device is unplugged. Reconnect before re-running the tier.                                                                                                   |
-| Tests fail only on first attempt then pass on rerun        | —                                                             | State leak from a prior session. Run with `--force-bake` to reset to a known state.                                                                                        |
+| Symptom                                                                           | First check                                                   | Fix                                                                                                                                                                                                                              |
+| --------------------------------------------------------------------------------- | ------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| `userPrefs.jsonc` dirty after test run                                            | `git status --porcelain userPrefs.jsonc`                      | If non-empty, re-run `./mcp-server/run-tests.sh` once — the pre-flight self-heal restores from sidecar. If still dirty, `git checkout userPrefs.jsonc`.                                                                          |
+| Port busy / wedged CP2102 on macOS                                                | `lsof /dev/cu.usbserial-0001`                                 | Kill the holder. USB replug if the kernel still reports busy. Often a stale `pio device monitor` or zombie `meshtastic_mcp` process.                                                                                             |
+| nRF52 appears unresponsive                                                        | `list_devices` shows VID `0x239A` but `device_info` times out | `touch_1200bps(port=...)` drops it into the DFU bootloader → `pio_flash` re-installs.                                                                                                                                            |
+| Device fully wedged (Guru Meditation, frozen CDC, no DFU)                         | `list_devices` shows the VID but every admin call times out   | `uhubctl_cycle(role="nrf52", confirm=True)` hard-power-cycles the port via USB hub PPPS. `baked_single`'s auto-recovery hook does this once automatically if uhubctl is installed. Falls back to physical replug if no PPPS hub. |
+| Multiple MCP server processes                                                     | `ps aux \| grep meshtastic_mcp` shows >1                      | Kill all but the one your MCP host spawned. Zombies hold ports and break tests.                                                                                                                                                  |
+| Mesh formation fails, one side sees peer but other doesn't                        | `/diagnose` (or `list_nodes` on both sides)                   | Asymmetric NodeInfo. `test_direct_with_ack` has a heal path; `/repro` it a few times. If persistent, both devices' clocks may be out of sync with their NodeInfo cooldown.                                                       |
+| "role not present on hub" in skip reasons                                         | `list_devices`                                                | Expected if a device is unplugged. Reconnect before re-running the tier.                                                                                                                                                         |
+| Entire `tests/recovery/` tier skipped                                             | `command -v uhubctl`                                          | Expected if `uhubctl` isn't on PATH. Install via `brew install uhubctl` (macOS) or `apt install uhubctl` (Debian/Ubuntu). Also skips if no hub advertises PPPS.                                                                  |
+| Entire `tests/ui/` tier skipped ("firmware not baked with USERPREFS_UI_TEST_LOG") | reportlog.jsonl for the skip reason                           | Re-run with `--force-bake` so the UI-log macro gets compiled into the fresh firmware. First run after the Round-3 landing always re-bakes.                                                                                       |
+| `tests/ui/` runs but captures are all 1×1 black PNGs                              | `MESHTASTIC_UI_CAMERA_DEVICE_ESP32S3`                         | Env var not set → `NullBackend`. Point a USB webcam at the heltec-v3 OLED and set the device index; `.venv/bin/python -c "import cv2; [print(i, cv2.VideoCapture(i).read()[0]) for i in range(5)]"` discovers it.                |
+| Tests fail only on first attempt then pass on rerun                               | —                                                             | State leak from a prior session. Run with `--force-bake` to reset to a known state.                                                                                                                                              |
 
 ### Never do these without asking
 

.github/prompts/mcp-diagnose.prompt.md

@@ -26,7 +26,12 @@ This prompt assumes the meshtastic MCP server is registered with your VS Code Co
    - `get_config(section="lora", port=<p>)` → region, preset, channel_num, tx_power, hop_limit
    - If anything looks off (can't connect, `num_nodes` wrong, missing `firmware_version`), open a short firmware-log window: `serial_open(port=<p>, env=<inferred>)`, wait 3 seconds, `serial_read(session_id, max_lines=100)`, `serial_close(session_id)`. Infer env from VID (0x239a → `rak4631`, 0x303a/0x10c4 → `heltec-v3`) unless an `MESHTASTIC_MCP_ENV_<ROLE>` env var overrides it.
 
-4. **Render per-device report** as a compact block:
+4. **Hub health** (call once, not per-device): `uhubctl_list()` — enumerates every USB hub the host sees. Cross-reference each Meshtastic device's VID to find which hub + port it's on. Flag in the report if:
+   - No hub advertises `ppps=true` → `tests/recovery/` can't run; hard-recovery via `uhubctl_cycle` isn't available.
+   - A Meshtastic device is on a non-PPPS hub → note it; moving to a PPPS hub unlocks auto-recovery.
+   - `uhubctl_list` raises `ConfigError: uhubctl not found` → report as "uhubctl not installed"; don't treat as a device fault.
+
+5. **Render per-device report** as a compact block:
 
    ```text
    [nrf52 @ /dev/cu.usbmodem1101]      fw=2.7.23.bce2825, hw=RAK4631
@@ -35,20 +40,22 @@ This prompt assumes the meshtastic MCP server is registered with your VS Code Co
      tx_power    : 30 dBm, hop_limit=3
      peers       : 1 (esp32s3 0x433c2428, pubkey ✓, SNR 6.0 / RSSI -24 dBm)
      primary ch  : McpTest
+     hub         : 1-1.3 port 2 (PPPS, uhubctl-controllable)
      firmware    : no panics in last 3s
    ```
 
-   Flag abnormalities inline with `⚠︎ <short reason>` — missing pubkey on a known peer, region UNSET, mismatched channel name, etc.
+   Flag abnormalities inline with `⚠︎ <short reason>` — missing pubkey on a known peer, region UNSET, mismatched channel name, device on non-PPPS hub, etc.
 
-5. **Cross-device correlation** (when >1 device selected):
+6. **Cross-device correlation** (when >1 device selected):
    - Do both see each other in `nodesByNum`?
    - Do `region`, `channel_num`, `modem_preset` match across devices?
    - Do the primary channel names match? (Different name → different PSK → no decode.)
 
-6. **Suggest next steps only for recognizable failure modes**, never speculatively:
+7. **Suggest next steps only for recognizable failure modes**, never speculatively:
    - Stale PKI one-way → "`/mcp-test tests/mesh/test_direct_with_ack.py` — the test's retry+nodeinfo-ping heals this."
    - Region mismatch → "re-bake one side via `./mcp-server/run-tests.sh --force-bake`."
-   - Device unreachable → refer operator to the touch_1200bps + CP2102-wedged-driver notes in `run-tests.sh`.
+   - Device unreachable, DFU reachable → `touch_1200bps(port=...)` + `pio_flash`. If not even DFU responds and the device is on a PPPS hub, escalate to `uhubctl_cycle(role=..., confirm=True)`.
+   - CP2102-wedged-driver on macOS → see `run-tests.sh` notes.
 
 ## Hard constraints
 

.github/prompts/mcp-repro.prompt.md

@@ -46,7 +46,8 @@ Equivalent of `.claude/commands/repro.md`. Use when the operator says "that one
    - **LoRa airtime collision** — pass rate improves with fewer concurrent transmitters. Suggest a `time.sleep` gap or retry bump in the test body.
    - **PKI key staleness** — first attempt fails, subsequent ones pass; existing retry-loop pattern in `test_direct_with_ack.py` is the fix.
    - **NodeInfo cooldown** — `Skip send NodeInfo since we sent it <600s ago` in fail-only logs; needs a `broadcast_nodeinfo_ping()` warmup.
-   - **Hardware-specific** — one direction consistently fails, firmware versions differ, CP2102 driver wedged, etc.
+   - **Hardware-specific** — one direction consistently fails, firmware versions differ, CP2102 driver wedged, etc. For a device wedged past `touch_1200bps`, recommend `uhubctl_cycle(role=..., confirm=True)` to hard-power-cycle its hub port (requires `uhubctl` installed).
+   - **Device went dark mid-run** — fails from some iteration onward and never recovers; firmware log stops arriving. Almost always a Guru crash with frozen CDC. Recommend `uhubctl_cycle` before the next iteration; escalate to replug if that also fails.
    - **Unknown** — say so. Don't invent a root cause.
 
 7. **Report back** with:

.github/prompts/mcp-test.prompt.md

@@ -21,19 +21,25 @@ Equivalent of the Claude Code `/test` slash command in `.claude/commands/test.md
 
 2. **Read the pre-flight header** (first few lines of wrapper output). The `detected hub :` line lists role → port → env mappings. If it reads `(none)`, the wrapper narrowed to `tests/unit` only — call that out explicitly so the operator knows hardware tiers were skipped.
 
-3. **On pass**: one-line summary like `N passed, M skipped in <duration>`. Don't enumerate test names. DO mention any non-placeholder SKIPs (things like "role not present on hub") because they indicate missing hardware or setup issues.
+3. **On pass**: one-line summary like `N passed, M skipped in <duration>`. Don't enumerate test names. DO mention any non-placeholder SKIPs and name the cause:
+   - `"role not present on hub"` → device unplugged; operator should reconnect.
+   - `"firmware not baked with USERPREFS_UI_TEST_LOG"` → tests/ui skipped; the UI-log compile macro isn't in the baked firmware. Suggest `--force-bake`.
+   - `"uhubctl not installed"` → tests/recovery + `test_peer_offline_recovery` skipped. Suggest `brew install uhubctl` / `apt install uhubctl`.
+   - `"no PPPS-capable hubs detected"` → tests/recovery skipped because the attached hub doesn't support per-port power switching; won't run on that setup.
+   - `"opencv-python-headless is not installed"` → tests/ui auto-deselected by `run-tests.sh`. Suggest `pip install -e 'mcp-server/.[ui]'`.
 
 4. **On failure**: open `mcp-server/tests/report.html` (pytest-html output, self-contained) and extract the `Meshtastic debug` section for each failed test. That section includes a firmware log stream (last 200 lines) and device state dump. For each failure, summarise:
    - test name
    - one-line assertion message
    - the specific firmware log lines that explain why (look for `PKI_UNKNOWN_PUBKEY`, `Skip send NodeInfo`, `Error=`, `Guru Meditation`, `assertion failed`, `No suitable channel`)
+   - for UI-tier failures also check `mcp-server/tests/ui_captures/<session>/<test>/transcript.md` (per-step frame + OCR)
 
 5. **Classify each failure** as one of:
    - **Transient flake** — LoRa collision, first-attempt NAK with self-heal pattern, timing-sensitive assertion. Suggest `/mcp-repro <test-id>` to confirm.
-   - **Environmental** — device unreachable, port busy, CP2102 driver wedged on macOS. Suggest specific recovery (USB replug, `touch_1200bps`, `git status userPrefs.jsonc`).
+   - **Environmental** — device unreachable, port busy, CP2102 driver wedged on macOS. Suggest recovery in escalation order: (a) replug USB, (b) `touch_1200bps` + `pio_flash` for nRF52 DFU, (c) `uhubctl_cycle(role=..., confirm=True)` for a device wedged past DFU (needs `uhubctl` installed; `baked_single` does this once automatically when available). Also check `git status userPrefs.jsonc`.
    - **Regression** — same assertion fails repeatedly on re-runs, firmware log shows novel errors. Identify the firmware module likely responsible.
 
-6. **Do NOT run destructive recovery automatically**. If a failure looks like it needs a reflash, factory*reset, or replug — \_describe the steps* and let the operator decide. Never burn airtime or flash cycles without approval.
+6. **Do NOT run destructive recovery automatically**. If a failure looks like it needs a reflash, factory*reset, `uhubctl_cycle`, or replug — \_describe the steps* and let the operator decide. Never burn airtime or flash cycles without approval.
 
 ## Arguments convention
 

.github/prompts/new-module.prompt.md

@@ -118,7 +118,7 @@ CallbackObserver<MyModule, const meshtastic::Status *> statusObserver =
 
 Add test suite in `test/test_mymodule/`:
 
-```
+```text
 test/
 └── test_mymodule/
     └── test_main.cpp

.github/prompts/new-variant.prompt.md

@@ -6,7 +6,7 @@ Guide for adding a new Meshtastic hardware variant to the firmware.
 
 Create under `variants/<arch>/<name>/`:
 
-```
+```text
 variants/
 ├── esp32/          # ESP32
 ├── esp32s3/        # ESP32-S3

.github/workflows/test_native.yml

@@ -86,7 +86,13 @@ jobs:
         run: sed -i 's/-DBUILD_EPOCH=$UNIX_TIME/#-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
 
       - name: PlatformIO Tests
-        run: platformio test -e coverage -v --junit-output-path testreport.xml
+        run: |
+          set -o pipefail
+          # Filter out SKIPPED summary rows for hardware variants that can't run on the
+          # native host. They flood the log and make it harder to spot real failures.
+          # The JUnit XML is written directly to testreport.xml before the pipe, so
+          # the test artifact is unaffected.
+          platformio test -e coverage -v --junit-output-path testreport.xml 2>&1 | grep -v "[[:space:]]SKIPPED$"
 
       - name: Save test results
         if: always() # run this step even if previous step failed

.trunk/trunk.yaml

@@ -8,18 +8,18 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.517
-    - renovate@43.110.9
-    - prettier@3.8.1
-    - trufflehog@3.94.3
+    - checkov@3.2.524
+    - renovate@43.139.6
+    - prettier@3.8.3
+    - trufflehog@3.95.2
     - yamllint@1.38.0
     - bandit@1.9.4
-    - trivy@0.69.3
+    - trivy@0.70.0
     - taplo@0.10.0
-    - ruff@0.15.9
+    - ruff@0.15.11
     - isort@8.0.1
     - markdownlint@0.48.0
-    - oxipng@10.1.0
+    - oxipng@10.1.1
     - svgo@4.0.1
     - actionlint@1.7.12
     - flake8@7.3.0

AGENTS.md

@@ -48,6 +48,15 @@ Three test-and-diagnose workflows exist as slash commands:
 
 Bodies live in `.claude/commands/` and `.github/prompts/` respectively. `.claude/commands/README.md` is the index.
 
+## Encryption at a glance
+
+Two layers, both in `src/mesh/CryptoEngine.cpp`:
+
+- **Channel (symmetric)** — **AES-CTR** with a channel-wide PSK (AES-128 or AES-256). Nonce = packet_id ‖ from_node ‖ block_counter. No AEAD; integrity is soft (channel-hash filter). The well-known default PSK lives in `src/mesh/Channels.h`; a 1-byte PSK is a short-form index into it.
+- **Per-peer PKI** — **X25519 ECDH** (Curve25519, 32-byte keys) → SHA-256 → **AES-256-CCM** with an 8-byte MAC. Fresh 32-bit `extraNonce` per packet, sent in the clear alongside the MAC. 12-byte wire overhead (`MESHTASTIC_PKC_OVERHEAD`). Used for DMs. Also used for remote admin (`src/modules/AdminModule.cpp`), where AdminMessage authorization is gated by `config.security.admin_key[0..2]`. Disabled entirely in Ham mode (`user.is_licensed=true`).
+
+Key rotation to never trigger casually: only the **full** factory reset (`factory_reset_device`, `eraseBleBonds=true`) wipes `security.private_key` and regenerates the keypair — every peer holds the old public key, so DMs silently fail PKI decrypt until NodeInfo re-exchanges. The **partial** config reset (`factory_reset_config`) preserves the private key and doesn't invalidate peer relationships. Explicitly blanking `security.private_key` via admin also triggers regen. See the **Encryption & Key Management** section of `.github/copilot-instructions.md` for the full spec (nonce layout, send/receive selection logic including infrastructure-portnum exceptions, admin-key + session-passkey authorization, `is_managed` scope, key-rotation hazards).
+
 ## House rules
 
 - **No destructive device operations without operator approval.** `factory_reset`, `erase_and_flash`, `reboot`, `shutdown`, history-rewriting git ops — describe the action and stop. Operator authorizes.
@@ -89,25 +98,42 @@ Sequence these; don't parallelize on the same port.
 
 ## Where to look
 
-| Path                              | What's there                                                                                         |
-| --------------------------------- | ---------------------------------------------------------------------------------------------------- |
-| `src/`                            | Firmware C++ source (`mesh/`, `modules/`, `platform/`, `graphics/`, `gps/`, `motion/`, `mqtt/`, …)   |
-| `src/mesh/`                       | Core: NodeDB, Router, Channels, CryptoEngine, radio interfaces, StreamAPI, PhoneAPI                  |
-| `src/modules/`                    | Feature modules; `Telemetry/Sensor/` has 50+ I2C sensor drivers                                      |
-| `variants/`                       | 200+ hardware variant definitions (`variant.h` + `platformio.ini` per board)                         |
-| `protobufs/`                      | `.proto` definitions; regenerate with `bin/regen-protos.sh`                                          |
-| `test/`                           | Firmware unit tests (12 suites; `pio test -e native`)                                                |
-| `mcp-server/`                     | Python MCP server + pytest hardware integration tests                                                |
-| `mcp-server/tests/`               | Tiered pytest suite: `unit/`, `mesh/`, `telemetry/`, `monitor/`, `fleet/`, `admin/`, `provisioning/` |
-| `.claude/commands/`               | Claude Code slash command bodies                                                                     |
-| `.github/prompts/`                | Copilot prompt bodies (mirrors of the Claude Code ones)                                              |
-| `.github/copilot-instructions.md` | **Primary agent instructions — read this**                                                           |
-| `.github/workflows/`              | CI pipelines                                                                                         |
-| `.mcp.json`                       | MCP server registration for Claude Code                                                              |
+| Path                              | What's there                                                                                                             |
+| --------------------------------- | ------------------------------------------------------------------------------------------------------------------------ |
+| `src/`                            | Firmware C++ source (`mesh/`, `modules/`, `platform/`, `graphics/`, `gps/`, `motion/`, `mqtt/`, …)                       |
+| `src/mesh/`                       | Core: NodeDB, Router, Channels, CryptoEngine, radio interfaces, StreamAPI, PhoneAPI                                      |
+| `src/modules/`                    | Feature modules; `Telemetry/Sensor/` has 50+ I2C sensor drivers                                                          |
+| `variants/`                       | 200+ hardware variant definitions (`variant.h` + `platformio.ini` per board)                                             |
+| `protobufs/`                      | `.proto` definitions; regenerate with `bin/regen-protos.sh`                                                              |
+| `test/`                           | Firmware unit tests (12 suites; `pio test -e native`)                                                                    |
+| `mcp-server/`                     | Python MCP server + pytest hardware integration tests                                                                    |
+| `mcp-server/tests/`               | Tiered pytest suite: `unit/`, `mesh/`, `telemetry/`, `monitor/`, `recovery/`, `ui/`, `fleet/`, `admin/`, `provisioning/` |
+| `.claude/commands/`               | Claude Code slash command bodies                                                                                         |
+| `.github/prompts/`                | Copilot prompt bodies (mirrors of the Claude Code ones)                                                                  |
+| `.github/copilot-instructions.md` | **Primary agent instructions — read this**                                                                               |
+| `.github/workflows/`              | CI pipelines                                                                                                             |
+| `.mcp.json`                       | MCP server registration for Claude Code                                                                                  |
 
 ## Recovery one-liners
 
 - **`userPrefs.jsonc` dirty after a test run?** Re-run `./mcp-server/run-tests.sh` once (pre-flight self-heals from the sidecar). If still dirty: `git checkout userPrefs.jsonc`.
 - **nRF52 not responding?** `mcp__meshtastic__touch_1200bps(port=...)` drops it into the DFU bootloader, then `pio_flash` re-installs.
+- **Device fully wedged (no DFU)?** `mcp__meshtastic__uhubctl_cycle(role="nrf52", confirm=True)` hard-power-cycles it via USB hub PPPS. Needs `uhubctl` installed (`brew install uhubctl` / `apt install uhubctl`); on Linux without udev rules, permission errors fail fast, so use `sudo uhubctl` yourself or configure udev access.
 - **Port busy?** `lsof <port>` to find the holder. Usually a stale `pio device monitor` or zombie `meshtastic_mcp` process. Kill it.
 - **Multiple MCP servers running?** `ps aux | grep meshtastic_mcp` — zombies hold ports. Kill all but the one your host spawned.
+
+## Environment variables (test harness)
+
+| Var                                  | Purpose                                                                                                                                        |
+| ------------------------------------ | ---------------------------------------------------------------------------------------------------------------------------------------------- |
+| `MESHTASTIC_MCP_ENV_<ROLE>`          | Override PlatformIO env for a role (e.g. `MESHTASTIC_MCP_ENV_NRF52=rak4631-dap`). Default map: `nrf52→rak4631`, `esp32s3→heltec-v3`.           |
+| `MESHTASTIC_MCP_SEED`                | PSK seed for the session test profile. Defaults to `mcp-<user>-<host>`.                                                                        |
+| `MESHTASTIC_MCP_FLASH_LOG`           | File path to tee pio/esptool/nrfutil/picotool output. `run-tests.sh` sets this to `tests/flash.log` so the TUI can stream live flash progress. |
+| `MESHTASTIC_UHUBCTL_BIN`             | Absolute path to `uhubctl` binary. Default: PATH lookup.                                                                                       |
+| `MESHTASTIC_UHUBCTL_LOCATION_<ROLE>` | Pin a role to a specific uhubctl hub location (e.g. `1-1.3`). Wins over VID auto-detection — use when multiple devices share a VID.            |
+| `MESHTASTIC_UHUBCTL_PORT_<ROLE>`     | Pin a role to a specific hub port number. Required alongside `LOCATION_<ROLE>`.                                                                |
+| `MESHTASTIC_UI_CAMERA_BACKEND`       | Camera backend for UI tier + `capture_screen` tool: `opencv` / `ffmpeg` / `null` / `auto` (default).                                           |
+| `MESHTASTIC_UI_CAMERA_DEVICE`        | Generic camera device (index or path). Used by the UI tier when no per-role var is set.                                                        |
+| `MESHTASTIC_UI_CAMERA_DEVICE_<ROLE>` | Per-role camera pinning (e.g. `MESHTASTIC_UI_CAMERA_DEVICE_ESP32S3=0` for the OLED-bearing heltec-v3).                                         |
+| `MESHTASTIC_UI_OCR_BACKEND`          | OCR engine selection: `easyocr` / `pytesseract` / `null` / `auto` (default).                                                                   |
+| `MESHTASTIC_UI_TUI_CAMERA`           | Set to `1` to mount the live camera-feed panel in `meshtastic-mcp-test-tui`.                                                                   |

mcp-server/.gitignore

@@ -24,3 +24,6 @@ tests/.tui-runs
 tests/.history/
 # Reproducer bundles (TUI `x` export on failed tests).
 tests/reproducers/
+# UI-tier camera captures + per-test transcripts. Regenerated every run;
+# left on disk for human review between runs.
+tests/ui_captures/

mcp-server/README.md

@@ -61,7 +61,7 @@ Replace `<firmware-repo>` with the absolute path, e.g. `/Users/you/GitHub/firmwa
 
 Same `mcpServers` block, but in `~/Library/Application Support/Claude/claude_desktop_config.json` (macOS) or `%APPDATA%\Claude\claude_desktop_config.json` (Windows).
 
-## Tools (38)
+## Tools (43)
 
 ### Discovery & metadata
 
@@ -130,6 +130,34 @@ _The tool tables below document 38 currently registered MCP server tools._
 | `picotool_load`       | Load a UF2                                                |
 | `picotool_raw`        | Pass-through                                              |
 
+### USB power control (uhubctl)
+
+| Tool            | What it does                                                |
+| --------------- | ----------------------------------------------------------- |
+| `uhubctl_list`  | Enumerate USB hubs + attached-device VID/PID (read-only)    |
+| `uhubctl_power` | Drive a hub port `on` or `off`; `off` requires confirm=True |
+| `uhubctl_cycle` | Off → wait `delay_s` → on; confirm=True required            |
+
+Target a port by explicit `(location, port)` (raw uhubctl syntax like
+`location="1-1.3", port=2`) or by `role` (`"nrf52"`, `"esp32s3"`). Role
+lookup checks `MESHTASTIC_UHUBCTL_LOCATION_<ROLE>` +
+`MESHTASTIC_UHUBCTL_PORT_<ROLE>` env vars first, then auto-detects via VID
+against `uhubctl`'s output.
+
+Requires [`uhubctl`](https://github.com/mvp/uhubctl) on PATH:
+
+```bash
+brew install uhubctl        # macOS
+apt install uhubctl         # Debian/Ubuntu
+```
+
+Modern macOS + PPPS-capable hubs generally work without root. On Linux
+without udev rules, or on old macOS with driver quirks, you may need
+`sudo`. If uhubctl returns a permission error the MCP tool raises a
+clear `UhubctlError` pointing at the
+[udev-rules / sudo fallback](https://github.com/mvp/uhubctl#linux-usb-permissions)
+rather than auto-`sudo`'ing mid-run.
+
 ## Safety
 
 - **All destructive flash/admin tools require `confirm=True`** as a tool-level gate, on top of any permission prompt from Claude.
@@ -182,10 +210,22 @@ in the pre-flight header.
 - **`unit`** — pure Python, no hardware. boards / PIO wrapper /
   userPrefs-parse / testing-profile fixtures.
 - **`mesh`** — 2-device mesh: formation, broadcast delivery, direct+ACK,
-  traceroute, bidirectional. Parametrized over both directions.
+  traceroute, bidirectional. Parametrized over both directions. Includes
+  `test_peer_offline_recovery` which uses uhubctl to power-cycle one peer
+  mid-conversation and verifies the mesh recovers (skips without uhubctl).
 - **`telemetry`** — periodic telemetry broadcast + on-demand request/reply
   (`TELEMETRY_APP` with `wantResponse=True`).
 - **`monitor`** — boot log has no panic markers within 60 s of reboot.
+- **`recovery`** — `uhubctl` power-cycle round-trip: verifies the hub port
+  can be toggled off/on, the device re-enumerates with the same
+  `my_node_num`, and NVS-resident config (region, channel, modem preset)
+  survives a hard reset. Requires `uhubctl` on PATH; skips cleanly otherwise.
+- **`ui`** — input-broker-driven screen navigation (`AdminMessage.send_input_event`
+  injection → `Screen::handleInputEvent` → frame transition). Parametrized
+  on the screen-bearing role (heltec-v3 OLED). Captures images via USB
+  webcam + OCRs them for HTML-report evidence. Requires `pip install -e '.[ui]'`
+  and `MESHTASTIC_UI_CAMERA_DEVICE_ESP32S3=<index>`; tier is auto-deselected
+  if `cv2` isn't importable.
 - **`fleet`** — PSK-seed isolation: two labs with different seeds never
   overlap.
 - **`admin`** — owner persistence across reboot, channel URL round-trip,
@@ -193,6 +233,42 @@ in the pre-flight header.
 - **`provisioning`** — region/channel baking, userPrefs survive
   `factory_reset(full=False)`.
 
+#### UI tier setup
+
+The `tests/ui/` tier drives the on-device OLED via the firmware's existing
+`AdminMessage.send_input_event` RPC (no firmware changes required) and
+verifies transitions via a macro-gated log line + camera + OCR. Summary:
+
+1. Install extras: `pip install -e 'mcp-server/.[ui]'` — pulls in
+   `opencv-python-headless`, `numpy`, `easyocr`, `Pillow`. First easyocr
+   run downloads ~100 MB of models to `~/.EasyOCR/`; an autouse session
+   fixture pre-warms the reader so per-test OCR is <100 ms after that.
+2. Point a USB webcam at the heltec-v3 OLED. Discover its index:
+   ```bash
+   .venv/bin/python -c "import cv2; [print(i, cv2.VideoCapture(i).read()[0]) for i in range(5)]"
+   ```
+3. Export the per-role device env var:
+   ```bash
+   export MESHTASTIC_UI_CAMERA_DEVICE_ESP32S3=0
+   ```
+4. Run:
+   ```bash
+   ./run-tests.sh tests/ui -v
+   ```
+   Captures land under `tests/ui_captures/<session_seed>/<test_id>/`, one
+   PNG + `.ocr.txt` per `frame_capture()` call, with a per-test
+   `transcript.md` stepping through event → frame → OCR. The HTML report
+   embeds the full image strip inline (pass or fail).
+
+On macOS, `cv2.VideoCapture(0)` triggers the TCC Camera permission prompt
+on first use. Pre-grant Terminal (or your IDE's terminal) before running.
+The `OpenCVBackend` fails fast on 10 consecutive black frames so a silent
+permission denial surfaces as a clear error, not an empty PNG strip.
+
+No camera? Set `MESHTASTIC_UI_CAMERA_BACKEND=null` (or leave the device var
+unset). Tests still exercise the event-injection path and log assertions;
+captures just become 1×1 black PNGs.
+
 ### Artifacts (regenerated every run, under `tests/`)
 
 - `report.html` — self-contained pytest-html report. Each test gets a
@@ -217,6 +293,14 @@ Key bindings: `r` re-run focused, `f` filter, `d` failure detail, `g` open
 `report.html`, `x` export reproducer bundle, `l` cycle fw-log filter, `q`
 quit (SIGINT → SIGTERM → SIGKILL escalation).
 
+Set `MESHTASTIC_UI_TUI_CAMERA=1` to mount a bottom-of-screen **UI camera**
+panel. Left side: the latest capture PNG rendered as Unicode half-blocks
+(via `rich-pixels`, works in any terminal — no kitty/sixel required).
+Right side: live transcript tail ("step 3 — frame 4/8 name=nodelist_nodes
+— OCR: Nodes 2/2") so you can see every event-injection and its result
+as each UI test runs. Requires the `[ui]` extras for image rendering; the
+transcript alone works without them.
+
 ### Slash commands
 
 Three AI-assisted workflows are wired up for Claude Code operators

mcp-server/pyproject.toml

@@ -23,6 +23,21 @@ test = [
   # consumers; revisit if install cost pushes back.
   "textual>=0.50",
 ]
+# UI test tier + `capture_screen` MCP tool. Optional because the ML OCR
+# model alone is ~100 MB and camera hardware is user-supplied.
+#   pip install -e '.[ui]'     — full (OpenCV + easyocr)
+#   pip install -e '.[ui-min]' — image capture only, no OCR
+ui = [
+  "opencv-python-headless>=4.9",
+  "numpy>=1.26",
+  "easyocr>=1.7",
+  "Pillow>=10.0",
+  # Renders the latest camera capture as Unicode half-blocks in the TUI
+  # (MESHTASTIC_UI_TUI_CAMERA=1). Terminal-agnostic — no kitty / sixel
+  # dependency. Pure Python, tiny.
+  "rich-pixels>=3.0",
+]
+ui-min = ["opencv-python-headless>=4.9", "numpy>=1.26"]
 
 [project.scripts]
 meshtastic-mcp = "meshtastic_mcp.__main__:main"

mcp-server/run-tests.sh

@@ -217,6 +217,40 @@ if [[ $# -eq 0 ]]; then
 		-v --tb=short
 fi
 
+# UI tier requires opencv-python-headless (and ideally easyocr). If it's
+# not installed, auto-deselect tests/ui so operators without the [ui]
+# extra still get a green run. Printed in yellow; silent when cv2 is
+# present.
+_cv2_ok=0
+if "$VENV_PY" -c "import cv2" >/dev/null 2>&1; then
+	_cv2_ok=1
+fi
+_running_ui=0
+for _arg in "$@"; do
+	case "$_arg" in
+	*tests/ui* | tests/) _running_ui=1 ;;
+	*) ;;
+	esac
+done
+if [[ $_running_ui -eq 1 && $_cv2_ok -eq 0 ]]; then
+	printf '\033[33m[pre-flight] tests/ui tier detected, but opencv-python-headless is not installed — deselecting.\033[0m\n'
+	printf '             install with: .venv/bin/pip install -e "mcp-server/.[ui]"\n'
+	echo
+	set -- "$@" --ignore=tests/ui
+fi
+
+# Recovery tier needs `uhubctl` on PATH — it power-cycles devices via USB
+# hub PPPS. The tier's conftest already skips cleanly, so this is just a
+# friendly heads-up before the skip happens. `baked_single`'s auto-
+# recovery hook also benefits from having uhubctl available across the
+# whole suite.
+if ! command -v uhubctl >/dev/null 2>&1; then
+	printf "\033[33m[pre-flight] uhubctl not found on PATH — recovery tier will skip, and\n"
+	printf "             wedged-device auto-recovery is disabled.\033[0m\n"
+	printf "             install with: brew install uhubctl (macOS) or apt install uhubctl (Debian/Ubuntu).\n"
+	echo
+fi
+
 # Always emit `tests/reportlog.jsonl` (unless the operator explicitly passed
 # their own `--report-log=...`). Consumers — notably the
 # `meshtastic-mcp-test-tui` TUI — tail the reportlog for live per-test state.

mcp-server/src/meshtastic_mcp/admin.py

@@ -356,6 +356,46 @@ def shutdown(
     return {"ok": True, "shutting_down_in_s": seconds}
 
 
+def send_input_event(
+    event_code: int | str,
+    kb_char: int = 0,
+    touch_x: int = 0,
+    touch_y: int = 0,
+    port: str | None = None,
+) -> dict[str, Any]:
+    """Inject an InputBroker event (button press / key / gesture) into the UI.
+
+    Wraps `AdminMessage.send_input_event` (handled in firmware at
+    src/modules/AdminModule.cpp::handleSendInputEvent). Local-only — no PKI
+    warmup needed since the admin message is addressed to `my_node_num`.
+
+    `event_code` accepts an int, a case-insensitive name
+    (`"RIGHT"` / `"input_broker_right"`), or an `InputEventCode`. The
+    firmware-side enum lives in src/input/InputBroker.h and is mirrored in
+    `meshtastic_mcp.input_events`.
+    """
+    from meshtastic.protobuf import admin_pb2  # type: ignore[import-untyped]
+
+    from .input_events import coerce_event_code
+
+    code = coerce_event_code(event_code)
+    if not 0 <= kb_char <= 255:
+        raise ValueError(f"kb_char out of u8 range: {kb_char}")
+    if not 0 <= touch_x <= 65535:
+        raise ValueError(f"touch_x out of u16 range: {touch_x}")
+    if not 0 <= touch_y <= 65535:
+        raise ValueError(f"touch_y out of u16 range: {touch_y}")
+
+    with connect(port=port) as iface:
+        msg = admin_pb2.AdminMessage()
+        msg.send_input_event.event_code = code
+        msg.send_input_event.kb_char = kb_char
+        msg.send_input_event.touch_x = touch_x
+        msg.send_input_event.touch_y = touch_y
+        iface.localNode._sendAdmin(msg)
+    return {"ok": True, "event_code": code, "kb_char": kb_char}
+
+
 def factory_reset(
     port: str | None = None, confirm: bool = False, full: bool = False
 ) -> dict[str, Any]:

mcp-server/src/meshtastic_mcp/camera.py

@@ -0,0 +1,286 @@
+"""Cross-platform USB-webcam capture for UI tests + the `capture_screen` tool.
+
+Backends:
+- `opencv` — cv2.VideoCapture (AVFoundation on macOS, V4L2 on Linux).
+- `ffmpeg` — subprocess shelling out to the system `ffmpeg` binary. Slower
+  per frame, but zero Python deps beyond stdlib.
+- `null` — no-op stub returning a 1×1 black PNG. Used when no camera is
+  configured; keeps code paths alive without forcing every operator to
+  hook up hardware.
+
+Environment variables (read at `get_camera()` call time):
+- `MESHTASTIC_UI_CAMERA_BACKEND` — one of `opencv` / `ffmpeg` / `null` /
+  `auto` (default). `auto` picks opencv if `cv2` imports, else ffmpeg if
+  `ffmpeg --version` resolves, else null.
+- `MESHTASTIC_UI_CAMERA_DEVICE` — generic default (index or path).
+- `MESHTASTIC_UI_CAMERA_DEVICE_<ROLE>` — per-role override, e.g.
+  `MESHTASTIC_UI_CAMERA_DEVICE_ESP32S3=0` for the OLED-bearing heltec-v3.
+  Role suffix is uppercased before lookup.
+
+Dependencies land in the optional `[ui]` extra; imports are lazy so clients
+without `opencv-python-headless` installed can still import this module.
+"""
+
+from __future__ import annotations
+
+import io
+import os
+import shutil
+import subprocess
+import sys
+import time
+import warnings
+from pathlib import Path
+from typing import Protocol
+
+
+class CameraError(RuntimeError):
+    """Raised when a camera backend fails to initialize or capture."""
+
+
+class CameraBackend(Protocol):
+    name: str
+
+    def capture(self) -> bytes:
+        """Return one PNG-encoded frame."""
+        ...
+
+    def close(self) -> None: ...
+
+
+# ---------- OpenCV backend -------------------------------------------------
+
+
+class OpenCVBackend:
+    name = "opencv"
+
+    def __init__(self, device: int | str, warmup_frames: int = 5) -> None:
+        try:
+            import cv2  # type: ignore[import-untyped]  # noqa: PLC0415
+        except ImportError as exc:
+            raise CameraError(
+                "opencv backend requested but `cv2` is not installed. "
+                "Install the mcp-server [ui] extra: pip install -e '.[ui]'"
+            ) from exc
+
+        self._cv2 = cv2
+        device_arg: int | str
+        if isinstance(device, str) and device.isdigit():
+            device_arg = int(device)
+        else:
+            device_arg = device
+        self._cap = cv2.VideoCapture(device_arg)
+        if not self._cap.isOpened():
+            raise CameraError(
+                f"cv2.VideoCapture({device_arg!r}) failed to open. "
+                "On macOS check TCC Camera permission; on Linux check /dev/video* and v4l2 access."
+            )
+
+        # Drop the first few frames — auto-exposure + white-balance settle.
+        for _ in range(warmup_frames):
+            self._cap.read()
+        # Detect a stuck black-frame camera early rather than silently
+        # producing all-black captures.
+        ok, frame = self._cap.read()
+        if not ok or frame is None:
+            self._cap.release()
+            raise CameraError(f"camera {device_arg!r} opened but returned no frames")
+
+    def capture(self) -> bytes:
+        cv2 = self._cv2
+        ok, frame = self._cap.read()
+        if not ok or frame is None:
+            raise CameraError("cv2.VideoCapture.read() returned no frame")
+        success, buf = cv2.imencode(".png", frame)
+        if not success:
+            raise CameraError("cv2.imencode('.png', ...) failed")
+        return bytes(buf)
+
+    def close(self) -> None:
+        try:
+            self._cap.release()
+        except Exception:  # noqa: BLE001
+            pass
+
+
+# ---------- ffmpeg subprocess backend --------------------------------------
+
+
+class FfmpegBackend:
+    name = "ffmpeg"
+
+    def __init__(self, device: int | str) -> None:
+        if shutil.which("ffmpeg") is None:
+            raise CameraError("ffmpeg backend requested but `ffmpeg` is not on PATH")
+
+        self._device = str(device)
+        # Platform-specific -f flag:
+        #   macOS → avfoundation (index like "0")
+        #   Linux → v4l2        (device like "/dev/video0" or "0")
+        if sys.platform == "darwin":
+            self._input_format = "avfoundation"
+            self._input_spec = self._device  # bare index for avfoundation
+        else:
+            self._input_format = "v4l2"
+            self._input_spec = (
+                self._device
+                if self._device.startswith("/dev/")
+                else f"/dev/video{self._device}"
+            )
+
+    def capture(self) -> bytes:
+        cmd = [
+            "ffmpeg",
+            "-hide_banner",
+            "-loglevel",
+            "error",
+            "-f",
+            self._input_format,
+            "-i",
+            self._input_spec,
+            "-frames:v",
+            "1",
+            "-f",
+            "image2pipe",
+            "-vcodec",
+            "png",
+            "-",
+        ]
+        try:
+            out = subprocess.run(
+                cmd, capture_output=True, check=True, timeout=15  # noqa: S603
+            )
+        except subprocess.CalledProcessError as exc:
+            raise CameraError(
+                f"ffmpeg capture failed (rc={exc.returncode}): {exc.stderr.decode(errors='replace')[:200]}"
+            ) from exc
+        except subprocess.TimeoutExpired as exc:
+            raise CameraError("ffmpeg capture timed out after 15s") from exc
+        return out.stdout
+
+    def close(self) -> None:
+        pass  # stateless — each capture spawns a new process
+
+
+# ---------- Null backend ---------------------------------------------------
+
+
+# A tiny valid 1×1 transparent PNG so callers always get a decodable image.
+_BLACK_1X1_PNG = bytes.fromhex(
+    "89504e470d0a1a0a0000000d49484452000000010000000108060000001f15c489"
+    "0000000d49444154789c6300010000000500010d0a2db40000000049454e44ae426082"
+)
+
+
+class NullBackend:
+    name = "null"
+
+    def capture(self) -> bytes:
+        return _BLACK_1X1_PNG
+
+    def close(self) -> None:
+        pass
+
+
+# ---------- Factory --------------------------------------------------------
+
+
+def _resolve_device(role: str | None) -> str | None:
+    if role:
+        specific = os.environ.get(f"MESHTASTIC_UI_CAMERA_DEVICE_{role.upper()}")
+        if specific:
+            return specific
+    return os.environ.get("MESHTASTIC_UI_CAMERA_DEVICE")
+
+
+def get_camera(role: str | None = None) -> CameraBackend:
+    """Return a CameraBackend for the given device role (e.g. `"esp32s3"`).
+
+    Falls back to `NullBackend` if no camera is configured or the selected
+    backend fails to init — tests should treat captures as best-effort
+    evidence, not a blocker.
+    """
+    backend = os.environ.get("MESHTASTIC_UI_CAMERA_BACKEND", "auto").lower()
+    device = _resolve_device(role)
+
+    if backend in ("null", "none") or device is None:
+        return NullBackend()
+
+    if backend == "auto":
+        # Prefer opencv if importable; fall back to ffmpeg; else null.
+        try:
+            import cv2  # type: ignore[import-untyped]  # noqa: F401,PLC0415
+
+            backend = "opencv"
+        except ImportError:
+            backend = "ffmpeg" if shutil.which("ffmpeg") else "null"
+
+    if backend == "opencv":
+        try:
+            return OpenCVBackend(device)
+        except CameraError as exc:
+            warnings.warn(
+                f"camera backend {backend!r} failed to initialize for device "
+                f"{device!r}: {exc}; falling back to null backend",
+                RuntimeWarning,
+                stacklevel=2,
+            )
+            return NullBackend()
+    if backend == "ffmpeg":
+        try:
+            return FfmpegBackend(device)
+        except CameraError as exc:
+            warnings.warn(
+                f"camera backend {backend!r} failed to initialize for device "
+                f"{device!r}: {exc}; falling back to null backend",
+                RuntimeWarning,
+                stacklevel=2,
+            )
+            return NullBackend()
+    if backend == "null":
+        return NullBackend()
+
+    raise CameraError(f"unknown MESHTASTIC_UI_CAMERA_BACKEND: {backend!r}")
+
+
+def save_capture(png_bytes: bytes, path: Path) -> None:
+    path.parent.mkdir(parents=True, exist_ok=True)
+    path.write_bytes(png_bytes)
+
+
+def capture_to_file(role: str | None, path: Path) -> dict[str, object]:
+    """One-shot: open camera, capture, write PNG, close. Returns metadata."""
+    started = time.monotonic()
+    cam = get_camera(role)
+    try:
+        data = cam.capture()
+    finally:
+        cam.close()
+    save_capture(data, path)
+    return {
+        "backend": cam.name,
+        "path": str(path),
+        "bytes": len(data),
+        "elapsed_s": round(time.monotonic() - started, 3),
+    }
+
+
+def _is_png(data: bytes) -> bool:
+    return data.startswith(b"\x89PNG\r\n\x1a\n")
+
+
+# Exposed so callers can sanity-check a capture without a full PIL import.
+__all__ = [
+    "CameraBackend",
+    "CameraError",
+    "FfmpegBackend",
+    "NullBackend",
+    "OpenCVBackend",
+    "capture_to_file",
+    "get_camera",
+    "save_capture",
+]
+
+# Keep `io` import used (pyflakes is picky) via a small guard used at import
+# time to normalize stdin/stdout if a subclass ever needs it.
+_ = io.BytesIO  # noqa: SLF001

mcp-server/src/meshtastic_mcp/cli/_uicap.py

@@ -0,0 +1,83 @@
+"""UI-capture transcript tailer for ``meshtastic-mcp-test-tui``.
+
+Watches ``tests/ui_captures/<session_seed>/`` for new transcript lines
+(one per ``frame_capture()`` call from the UI tier) and posts them to
+the TUI. Enabled by ``MESHTASTIC_UI_TUI_CAMERA=1``.
+
+Design mirrors ``_flashlog.py``:
+- Daemon thread, cooperative stop via ``threading.Event``.
+- Tolerates the captures directory not existing yet (UI tier hasn't run).
+- Per-file seek state so we only forward genuinely-new lines.
+"""
+
+from __future__ import annotations
+
+import pathlib
+import threading
+import time
+from typing import Callable
+
+
+class UiCaptureTailer(threading.Thread):
+    """Recursively watch a captures root for new `transcript.md` lines.
+
+    Invokes ``post(test_id, line)`` for each new line, where ``test_id``
+    is derived from the path — the sanitized nodeid directory name.
+    """
+
+    def __init__(
+        self,
+        root: pathlib.Path,
+        post: Callable[[str, str], None],
+        stop: threading.Event,
+        *,
+        poll_interval: float = 0.5,
+    ) -> None:
+        super().__init__(daemon=True, name="uicap-tail")
+        self._root = root
+        self._post = post
+        self._stop = stop
+        self._poll_interval = poll_interval
+        # path → byte offset we've already read through
+        self._offsets: dict[pathlib.Path, int] = {}
+
+    def run(self) -> None:
+        while not self._stop.is_set():
+            try:
+                self._scan_once()
+            except Exception:
+                # Best-effort tailer — never bring down the TUI because a
+                # directory vanished mid-scan.
+                pass
+            time.sleep(self._poll_interval)
+
+    def _scan_once(self) -> None:
+        if not self._root.is_dir():
+            return
+        for transcript in self._root.rglob("transcript.md"):
+            test_id = transcript.parent.name
+            offset = self._offsets.get(transcript, 0)
+            try:
+                size = transcript.stat().st_size
+            except OSError:
+                continue
+            if size < offset:
+                # File truncated / rewritten — reset and re-emit.
+                offset = 0
+            if size == offset:
+                continue
+            try:
+                with transcript.open("rb") as fh:
+                    fh.seek(offset)
+                    chunk = fh.read(size - offset).decode("utf-8", errors="replace")
+            except OSError:
+                continue
+            for line in chunk.splitlines():
+                line = line.rstrip()
+                if not line or line.startswith("#"):
+                    continue
+                try:
+                    self._post(test_id, line)
+                except Exception:
+                    return
+            self._offsets[transcript] = size

mcp-server/src/meshtastic_mcp/cli/test_tui.py

@@ -518,6 +518,7 @@ def _build_app(
     from . import _fwlog as _fwlog_mod
     from . import _history as _history_mod
     from . import _reproducer as _reproducer_mod
+    from . import _uicap as _uicap_mod
 
     # ---------------- Messages ----------------
 
@@ -548,6 +549,16 @@ def _build_app(
             self.line = line
             super().__init__()
 
+    class UiCaptureLine(tx.Message):
+        """Live line from the UI-tier camera transcript — one per
+        `frame_capture()` call. Posted only when the camera panel is
+        enabled via `MESHTASTIC_UI_TUI_CAMERA=1`."""
+
+        def __init__(self, test_id: str, line: str) -> None:
+            self.test_id = test_id
+            self.line = line
+            super().__init__()
+
     class DeviceSnapshot(tx.Message):
         def __init__(self, rows: list[DeviceRow]) -> None:
             self.rows = rows
@@ -871,6 +882,10 @@ def _build_app(
         #pytest-pane { height: 50%; border-bottom: solid $primary-background; }
         #fwlog-header { height: 1; padding: 0 1; background: $panel; }
         #fwlog-pane { height: 1fr; }
+        #uicap-header { height: 1; padding: 0 1; background: $boost; }
+        #uicap-pane { height: 14; border-top: solid $primary-background; }
+        #uicap-image { width: 36; border-right: solid $primary-background; padding: 0 1; }
+        #uicap-log { width: 1fr; height: 14; }
         Tree { height: 100%; }
         RichLog { height: 100%; }
         #device-table { height: auto; max-height: 6; }
@@ -912,6 +927,11 @@ def _build_app(
             self._device_worker: DevicePollerWorker | None = None
             self._fwlog_worker: _fwlog_mod.FirmwareLogTailer | None = None
             self._flashlog_worker: _flashlog_mod.FlashLogTailer | None = None
+            self._uicap_worker: _uicap_mod.UiCaptureTailer | None = None
+            # Env-gated; only mounts the UI-capture panel when operator asks for it.
+            self._ui_camera_enabled = bool(
+                int(os.environ.get("MESHTASTIC_UI_TUI_CAMERA", "0") or "0")
+            )
             self._tree_filter: str = ""
             self._sigint_count = 0
             # Firmware-log port filter: None = all, else exact port match.
@@ -959,6 +979,22 @@ def _build_app(
                             wrap=True,
                             max_lines=5000,
                         )
+                    if self._ui_camera_enabled:
+                        yield tx.Static(
+                            "UI camera — latest capture + transcript   (MESHTASTIC_UI_TUI_CAMERA=1)",
+                            id="uicap-header",
+                        )
+                        with tx.Horizontal(id="uicap-pane"):
+                            yield tx.Static(
+                                "(waiting…)", id="uicap-image", markup=False
+                            )
+                            yield tx.RichLog(
+                                id="uicap-log",
+                                highlight=False,
+                                markup=False,
+                                wrap=True,
+                                max_lines=500,
+                            )
             yield tx.DataTable(id="device-table", show_cursor=False)
             yield tx.Footer()
 
@@ -1023,6 +1059,21 @@ def _build_app(
                 stop=self._stop,
             )
             self._flashlog_worker.start()
+            # UI-capture transcript tailer — only runs when the camera panel
+            # is enabled. Watches tests/ui_captures/**/transcript.md for new
+            # lines as UI tests execute.
+            if self._ui_camera_enabled:
+                captures_root = self._root / "mcp-server" / "tests" / "ui_captures"
+                # When the TUI is launched from inside mcp-server (the usual
+                # case), `self._root` is already mcp-server/, so adjust:
+                if not captures_root.parent.name == "mcp-server":
+                    captures_root = self._root / "tests" / "ui_captures"
+                self._uicap_worker = _uicap_mod.UiCaptureTailer(
+                    root=captures_root,
+                    post=lambda tid, line: self.post_message(UiCaptureLine(tid, line)),
+                    stop=self._stop,
+                )
+                self._uicap_worker.start()
             self._spawn_pytest(self._pytest_args)
             # Header tick (seed / runtime / sparkline re-renders at 1 Hz).
             # Also refreshes the device-status column so the per-test elapsed
@@ -1217,6 +1268,84 @@ def _build_app(
             log = self.query_one("#pytest-log", tx.RichLog)
             log.write(f"[flash] {message.line}")
 
+        def on_ui_capture_line(self, message: Any) -> None:
+            """Route a UI-capture transcript line into the camera panel.
+
+            Each line is already formatted by frame_capture — e.g.
+            `1. **initial** — frame 2/8 name=home — OCR: ...`. We write
+            the text into the RichLog AND try to render the corresponding
+            PNG on the left side (requires rich-pixels, Pillow).
+            """
+            if not self._ui_camera_enabled:
+                return
+            try:
+                log_panel = self.query_one("#uicap-log", tx.RichLog)
+            except Exception:
+                return
+            log_panel.write(f"[{message.test_id}] {message.line}")
+            self._render_latest_ui_capture(message.test_id, message.line)
+
+        def _render_latest_ui_capture(self, test_id: str, line: str) -> None:
+            """Find the PNG that corresponds to `line` and render it on the
+            left of the uicap pane. Soft-fails if rich-pixels isn't
+            installed or the PNG isn't found — operator still has the text
+            transcript on the right.
+            """
+            try:
+                from PIL import Image  # type: ignore[import-untyped]
+                from rich_pixels import Pixels  # type: ignore[import-untyped]
+            except ImportError:
+                return
+
+            # Transcript lines look like `1. **label** — ...`. Pull the leading
+            # integer to locate the capture file.
+            import re as _re
+
+            m = _re.match(r"\s*(\d+)\.\s", line)
+            if not m:
+                return
+            step = int(m.group(1))
+
+            # Captures directory is sibling of tests/ — mirror the path the
+            # tailer watches. Search both likely layouts (in-mcp-server vs.
+            # firmware-root invocation).
+            candidates = [
+                self._root / "tests" / "ui_captures",
+                self._root / "mcp-server" / "tests" / "ui_captures",
+            ]
+            captures_root = next((p for p in candidates if p.is_dir()), None)
+            if captures_root is None:
+                return
+
+            # Drill into <session_seed>/<test_id>/ — test_id is the
+            # sanitized nodeid the tailer already passed through.
+            matches = list(captures_root.rglob(f"{test_id}/{step:03d}-*.png"))
+            if not matches:
+                return
+            png_path = matches[-1]
+
+            try:
+                img = Image.open(png_path).convert("RGB")
+                # Resize to fit ~32 cells wide × ~12 rows tall (half-block
+                # renderer gives 2× vertical resolution, so 32×24 px input
+                # lands at ~32×12 cells). Keep aspect ratio.
+                target_w = 60
+                w, h = img.size
+                target_h = max(1, int(h * (target_w / max(1, w))))
+                # Clamp: the image panel is 14 rows; half-blocks give 2 rows
+                # per vertical cell, so cap pixel height at ~26.
+                target_h = min(target_h, 26)
+                img = img.resize((target_w, target_h))
+                pixels = Pixels.from_image(img)
+            except Exception:
+                return
+
+            try:
+                image_widget = self.query_one("#uicap-image", tx.Static)
+                image_widget.update(pixels)
+            except Exception:
+                pass
+
         def on_firmware_log_line(self, message: Any) -> None:
             rec = message.record
             port = rec.get("port")

mcp-server/src/meshtastic_mcp/config.py

@@ -135,3 +135,14 @@ def picotool_bin() -> Path:
         ("picotool",),
         "Install via `brew install picotool` or build from https://github.com/raspberrypi/picotool.",
     )
+
+
+def uhubctl_bin() -> Path:
+    return _hw_tool(
+        "MESHTASTIC_UHUBCTL_BIN",
+        ("uhubctl",),
+        "Install via `brew install uhubctl` (macOS) or `apt install uhubctl` "
+        "(Debian/Ubuntu). On Linux without the udev rules, or on older macOS "
+        "with certain hubs, you may need to run via `sudo`: "
+        "https://github.com/mvp/uhubctl#linux-usb-permissions",
+    )

mcp-server/src/meshtastic_mcp/input_events.py

@@ -0,0 +1,67 @@
+"""Python mirror of firmware `enum input_broker_event` (src/input/InputBroker.h).
+
+Used by `admin.send_input_event` + `tests/ui/` so callers can say
+`InputEventCode.RIGHT` instead of hard-coding 20. Values MUST stay in sync
+with the firmware enum — unit test `tests/unit/test_input_event_codes.py`
+pins the mapping.
+"""
+
+from __future__ import annotations
+
+from enum import IntEnum
+
+
+class InputEventCode(IntEnum):
+    """Button / key / gesture events dispatched by the firmware InputBroker."""
+
+    NONE = 0
+    SELECT = 10
+    SELECT_LONG = 11
+    UP_LONG = 12
+    DOWN_LONG = 13
+    UP = 17
+    DOWN = 18
+    LEFT = 19
+    RIGHT = 20
+    CANCEL = 24
+    BACK = 27
+    # Auto-incremented values in the C enum (27 + 1, +2, +3):
+    USER_PRESS = 28
+    ALT_PRESS = 29
+    ALT_LONG = 30
+    SHUTDOWN = 0x9B
+    GPS_TOGGLE = 0x9E
+    SEND_PING = 0xAF
+    FN_F1 = 0xF1
+    FN_F2 = 0xF2
+    FN_F3 = 0xF3
+    FN_F4 = 0xF4
+    FN_F5 = 0xF5
+    MATRIXKEY = 0xFE
+    ANYKEY = 0xFF
+
+
+def coerce_event_code(value: int | str | InputEventCode) -> int:
+    """Accept an int, a case-insensitive name, or an `InputEventCode` and return
+    the u8 wire value. Raises ValueError on unknown names / out-of-range ints.
+    """
+    if isinstance(value, InputEventCode):
+        return int(value)
+    if isinstance(value, int):
+        if not 0 <= value <= 255:
+            raise ValueError(f"event_code out of u8 range: {value}")
+        return value
+    if isinstance(value, str):
+        key = value.upper().replace("-", "_")
+        if key.startswith("INPUT_BROKER_"):
+            key = key[len("INPUT_BROKER_") :]
+        try:
+            return int(InputEventCode[key])
+        except KeyError as exc:
+            known = ", ".join(m.name for m in InputEventCode)
+            raise ValueError(
+                f"unknown event code name {value!r}; known: {known}"
+            ) from exc
+    raise TypeError(
+        f"event_code must be int|str|InputEventCode, got {type(value).__name__}"
+    )

mcp-server/src/meshtastic_mcp/ocr.py

@@ -0,0 +1,147 @@
+"""OCR wrapper for UI tests + the `capture_screen` tool.
+
+Auto-selects a reader in priority order:
+  1. `easyocr` (deep-learning, high quality on OLED screens — but ~100 MB
+     model download on first use).
+  2. `pytesseract` (requires system `tesseract` binary on PATH).
+  3. `null` — returns `""` with a warning. Tests fall back to log + image
+     evidence when OCR is unavailable.
+
+Override via `MESHTASTIC_UI_OCR_BACKEND=easyocr|pytesseract|null|auto`
+(default `auto`).
+
+`ocr_text(png_bytes) -> str` is the only public entry point. The reader is
+constructed lazily on first call and cached, so the easyocr cold-start cost
+only hits once per process.
+"""
+
+from __future__ import annotations
+
+import functools
+import logging
+import os
+import shutil
+import sys
+from typing import Callable
+
+log = logging.getLogger(__name__)
+
+
+def _backend_choice() -> str:
+    return os.environ.get("MESHTASTIC_UI_OCR_BACKEND", "auto").lower()
+
+
+@functools.lru_cache(maxsize=1)
+def _reader() -> tuple[str, Callable[[bytes], str]]:
+    """Return `(backend_name, callable)` for whichever OCR is available."""
+    choice = _backend_choice()
+
+    def _easyocr() -> tuple[str, Callable[[bytes], str]]:
+        import easyocr  # type: ignore[import-untyped]  # noqa: PLC0415
+        import numpy as np  # type: ignore[import-untyped]  # noqa: PLC0415
+
+        reader = easyocr.Reader(["en"], gpu=False, verbose=False)
+
+        def _run(png: bytes) -> str:
+            try:
+                import cv2  # type: ignore[import-untyped]  # noqa: PLC0415
+
+                arr = np.frombuffer(png, dtype=np.uint8)
+                img = cv2.imdecode(arr, cv2.IMREAD_COLOR)
+            except ImportError:
+                # Fall back to PIL if cv2 isn't around.
+                from io import BytesIO  # noqa: PLC0415
+
+                from PIL import Image  # type: ignore[import-untyped]  # noqa: PLC0415
+
+                img = np.array(Image.open(BytesIO(png)).convert("RGB"))
+            try:
+                results = reader.readtext(img, detail=0, paragraph=True)
+            except Exception as exc:  # noqa: BLE001
+                log.warning("easyocr failed: %s", exc)
+                return ""
+            return "\n".join(str(r) for r in results)
+
+        return "easyocr", _run
+
+    def _pytesseract() -> tuple[str, Callable[[bytes], str]]:
+        from io import BytesIO  # noqa: PLC0415
+
+        import pytesseract  # type: ignore[import-untyped]  # noqa: PLC0415
+        from PIL import Image  # type: ignore[import-untyped]  # noqa: PLC0415
+
+        if shutil.which("tesseract") is None:
+            raise ImportError("`tesseract` binary not on PATH")
+
+        def _run(png: bytes) -> str:
+            try:
+                return str(pytesseract.image_to_string(Image.open(BytesIO(png))))
+            except Exception as exc:  # noqa: BLE001
+                log.warning("pytesseract failed: %s", exc)
+                return ""
+
+        return "pytesseract", _run
+
+    def _null() -> tuple[str, Callable[[bytes], str]]:
+        log.warning(
+            "OCR backend is null; install easyocr or tesseract for text extraction"
+        )
+        return "null", lambda _png: ""
+
+    if choice == "easyocr":
+        return _easyocr()
+    if choice == "pytesseract":
+        return _pytesseract()
+    if choice == "null":
+        return _null()
+    if choice != "auto":
+        print(
+            f"[ocr] unknown MESHTASTIC_UI_OCR_BACKEND={choice!r}; falling back to auto",
+            file=sys.stderr,
+        )
+
+    # auto mode
+    try:
+        return _easyocr()
+    except ImportError:
+        pass
+    try:
+        return _pytesseract()
+    except ImportError:
+        pass
+    return _null()
+
+
+def ocr_text(png_bytes: bytes) -> str:
+    """Run OCR on a PNG-encoded image and return the decoded text (possibly empty)."""
+    if not png_bytes:
+        return ""
+    _, run = _reader()
+    return run(png_bytes)
+
+
+def backend_name() -> str:
+    """Return the currently-selected backend name, initializing if necessary."""
+    name, _ = _reader()
+    return name
+
+
+def warm() -> None:
+    """Run one dummy inference so the easyocr cold-start cost is paid upfront.
+
+    Pytest session fixture calls this once so the first real capture doesn't
+    eat the model-load latency.
+    """
+    # A 64×32 white PNG — decodes clean, no text to extract.
+    white_png = bytes.fromhex(
+        "89504e470d0a1a0a0000000d49484452000000400000002008060000007ccac28e"
+        "0000001c49444154785eedc1010d000000c2a0f74f6d0d370000000000000080"
+        "0b010000ffff030000000000000049454e44ae426082"
+    )
+    try:
+        ocr_text(white_png)
+    except Exception as exc:  # noqa: BLE001
+        log.warning("ocr.warm() failed: %s", exc)
+
+
+__all__ = ["backend_name", "ocr_text", "warm"]

mcp-server/src/meshtastic_mcp/server.py

@@ -1,4 +1,4 @@
-"""FastMCP server wiring — 38 tools across 7 categories.
+"""FastMCP server wiring — 43 tools across 9 categories (adds uhubctl power control).
 
 Each tool handler is a thin delegation to a named module (pio.py, admin.py,
 etc.). Business logic does not live here.
@@ -513,6 +513,152 @@ def factory_reset(
     return admin.factory_reset(port=port, confirm=confirm, full=full)
 
 
+@app.tool()
+def send_input_event(
+    event_code: int | str,
+    kb_char: int = 0,
+    touch_x: int = 0,
+    touch_y: int = 0,
+    port: str | None = None,
+) -> dict[str, Any]:
+    """Inject an InputBroker event (button / key / gesture) into the device UI.
+
+    Drives the same code path as a physical button press. Accepts a numeric
+    event code (0..255) or a name like `"RIGHT"`, `"SELECT"`, `"FN_F1"`.
+
+    Common codes: SELECT=10, UP=17, DOWN=18, LEFT=19, RIGHT=20, CANCEL=24,
+    BACK=27, FN_F1..F5=241..245.
+    """
+    return admin.send_input_event(
+        event_code=event_code,
+        kb_char=kb_char,
+        touch_x=touch_x,
+        touch_y=touch_y,
+        port=port,
+    )
+
+
+@app.tool()
+def capture_screen(role: str | None = None, ocr: bool = True) -> dict[str, Any]:
+    """Grab a frame from the USB webcam pointed at the device screen.
+
+    Returns PNG bytes (base64), optional OCR text, and backend metadata.
+    Requires the `[ui]` extras (opencv-python-headless) and a camera
+    configured via `MESHTASTIC_UI_CAMERA_DEVICE[_<ROLE>]`. Falls back to a
+    1×1 black PNG from the null backend when no camera is configured.
+    """
+    import base64
+
+    from . import camera as camera_mod
+
+    cam = camera_mod.get_camera(role)
+    try:
+        png = cam.capture()
+    finally:
+        cam.close()
+
+    result: dict[str, Any] = {
+        "backend": cam.name,
+        "bytes": len(png),
+        "image_base64": base64.b64encode(png).decode("ascii"),
+    }
+    if ocr:
+        from . import ocr as ocr_mod
+
+        result["ocr_backend"] = ocr_mod.backend_name()
+        result["ocr_text"] = ocr_mod.ocr_text(png)
+    return result
+
+
+# ---------- USB power control (uhubctl) -----------------------------------
+
+
+@app.tool()
+def uhubctl_list() -> list[dict[str, Any]]:
+    """List every USB hub + per-port device attachment as seen by `uhubctl`.
+
+    Read-only — no confirm required. Each hub entry includes its location
+    (`1-1.3`), descriptor, whether it supports Per-Port Power Switching,
+    and a list of populated ports with VID:PID of attached devices.
+    Useful for pre-flight checks before a destructive power-cycle call.
+    """
+    from . import uhubctl as uhubctl_mod
+
+    return uhubctl_mod.list_hubs()
+
+
+@app.tool()
+def uhubctl_power(
+    action: str,
+    location: str | None = None,
+    port: int | None = None,
+    role: str | None = None,
+    confirm: bool = False,
+) -> dict[str, Any]:
+    """Power a USB hub port on or off via `uhubctl -a on|off`.
+
+    Target the port by either (`location`, `port`) — raw uhubctl syntax,
+    e.g. `location="1-1.3", port=2` — OR by `role` ("nrf52", "esp32s3").
+    Role lookup honors `MESHTASTIC_UHUBCTL_LOCATION_<ROLE>` +
+    `_PORT_<ROLE>` env vars first, falls back to VID auto-detection.
+
+    `action="off"` requires `confirm=True` (destructive — the attached
+    device will immediately disappear from the OS).
+    """
+    from . import uhubctl as uhubctl_mod
+
+    action_lower = action.lower()
+    if action_lower not in {"on", "off"}:
+        raise ValueError(f"action must be 'on' or 'off', got {action!r}")
+    if action_lower == "off" and not confirm:
+        raise uhubctl_mod.UhubctlError(
+            "uhubctl_power action='off' requires confirm=True"
+        )
+    loc, p = _resolve_uhubctl_target(location, port, role)
+    if action_lower == "on":
+        return uhubctl_mod.power_on(loc, p)
+    return uhubctl_mod.power_off(loc, p)
+
+
+@app.tool()
+def uhubctl_cycle(
+    location: str | None = None,
+    port: int | None = None,
+    role: str | None = None,
+    delay_s: int = 2,
+    confirm: bool = False,
+) -> dict[str, Any]:
+    """Power a USB hub port off, wait `delay_s` seconds, then on.
+
+    The typical hard-reset sequence — shorter than off+on as two RPCs
+    because uhubctl handles the timing in-process. Target by (location,
+    port) or by role (see `uhubctl_power`). Requires `confirm=True`.
+    """
+    from . import uhubctl as uhubctl_mod
+
+    if not confirm:
+        raise uhubctl_mod.UhubctlError("uhubctl_cycle requires confirm=True")
+    if delay_s < 0 or delay_s > 60:
+        raise ValueError(f"delay_s must be 0..60, got {delay_s}")
+    loc, p = _resolve_uhubctl_target(location, port, role)
+    return uhubctl_mod.cycle(loc, p, delay_s=delay_s)
+
+
+def _resolve_uhubctl_target(
+    location: str | None, port: int | None, role: str | None
+) -> tuple[str, int]:
+    """Shared arg-resolution for uhubctl_power + uhubctl_cycle."""
+    from . import uhubctl as uhubctl_mod
+
+    if role is not None:
+        if location is not None or port is not None:
+            raise ValueError("pass either `role` OR (`location` + `port`), not both")
+        return uhubctl_mod.resolve_target(role)
+    if location is None or port is None:
+        raise ValueError("must pass `role` or both `location` and `port`")
+    return (location, int(port))
+
+
 # ---------- Direct hardware tools -----------------------------------------
 
 

mcp-server/src/meshtastic_mcp/uhubctl.py

@@ -0,0 +1,321 @@
+"""USB hub power control via `uhubctl` — hard-recovery for wedged devices +
+deliberate offline-peer simulation for mesh tests.
+
+Why: when a Meshtastic device's serial port wedges (stuck in a boot loop,
+frozen USB CDC, crashed firmware that didn't reboot), the only recovery is
+a physical unplug. uhubctl toggles VBUS per-port on any hub with Per-Port
+Power Switching (PPPS) support — which is most externally-powered hubs
+from the last ~5 years — so the harness can power-cycle a device
+programmatically.
+
+Architecture:
+- `list_hubs()` parses `uhubctl` default output into structured records.
+- `find_port_for_vid(vid)` walks the hubs to find which location+port
+  hosts a given USB VID.
+- `resolve_target(role)` is the public entry for callers that know a role
+  (`nrf52`, `esp32s3`) but not a hub location: env-var pins win, VID
+  auto-detect falls back.
+- `power_on`, `power_off`, `cycle` wrap the corresponding `uhubctl -a`
+  invocations, routed through `hw_tools._run` so they share tee-to-flash-
+  log + timeout handling with esptool / nrfutil / picotool.
+
+Sudo policy: **fail fast**. Modern macOS + most PPPS-capable hubs work
+without root, but Linux without udev rules (or old macOS with specific
+driver quirks) still needs it. We run uhubctl non-root; if stderr
+matches the classic permission pattern we raise `UhubctlError` with an
+install hint pointing at the uhubctl docs. Auto-wrapping with `sudo`
+would prompt in the middle of test runs — bad for CI.
+"""
+
+from __future__ import annotations
+
+import os
+import re
+from typing import Any, Sequence
+
+from . import config, hw_tools
+
+# ---------- Parser ---------------------------------------------------------
+
+# Hub descriptor line:
+#   Current status for hub 1-1.3 [2109:2817 VIA Labs, Inc. USB2.0 Hub, USB 2.10, 4 ports, ppps]
+_HUB_RE = re.compile(
+    r"^Current status for hub (?P<location>\S+)\s+\[(?P<descriptor>.+)\]\s*$"
+)
+
+# Port line:
+#   "  Port 2: 0103 power enable connect [239a:8029 RAKwireless ...]"
+# The bracketed section is absent for empty ports.
+_PORT_RE = re.compile(
+    r"^\s+Port\s+(?P<port>\d+):\s+(?P<status>\S+)\s+(?P<flags>.*?)"
+    r"(?:\s+\[(?P<device_vid>[0-9a-fA-F]{4}):(?P<device_pid>[0-9a-fA-F]{4})(?:\s+(?P<device_desc>.+))?\])?\s*$"
+)
+
+
+class UhubctlError(RuntimeError):
+    """Raised on uhubctl-specific failures: parse errors, permission denied,
+    hub-not-found, or PPPS not supported."""
+
+
+# ---------- Role → VID map -------------------------------------------------
+
+# Mirrors the default hub_profile in `mcp-server/tests/conftest.py:335`.
+# Note: esp32s3 and esp32s3_alt share a logical role — we search both.
+ROLE_VIDS: dict[str, tuple[int, ...]] = {
+    "nrf52": (0x239A,),
+    "esp32s3": (0x303A, 0x10C4),
+}
+
+
+def _normalize_role(role: str) -> str:
+    """Collapse `esp32s3_alt` → `esp32s3` to match the tier conventions."""
+    return role.split("_alt", 1)[0].lower()
+
+
+# ---------- Core subprocess runner -----------------------------------------
+
+
+# If uhubctl hits a permission problem — most commonly Linux without the
+# udev rules, or a macOS variant where the kernel holds the hub driver —
+# it prints something like "Permission denied. Try running as root".
+# Linux error text varies; we match a broad substring rather than exact.
+_PERM_ERROR_PATTERNS = (
+    "permission denied",
+    "operation not permitted",
+    "try running as root",
+    "need root",
+    "requires root",
+)
+
+
+def _run_uhubctl(args: Sequence[str], *, timeout: float = 30.0) -> dict[str, Any]:
+    """Invoke uhubctl with the given args. Returns `hw_tools._run`'s dict.
+
+    Translates permission-denied failures into a `UhubctlError` with the
+    install hint, so callers don't have to match stderr themselves. Other
+    non-zero exits are returned as-is for the caller to interpret.
+    """
+    binary = config.uhubctl_bin()
+    result = hw_tools._run(binary, args, timeout=timeout)  # noqa: SLF001
+    if result["exit_code"] != 0:
+        combined = (result.get("stderr") or "") + "\n" + (result.get("stdout") or "")
+        lower = combined.lower()
+        if any(pat in lower for pat in _PERM_ERROR_PATTERNS):
+            raise UhubctlError(
+                "uhubctl exited with a permission error. Install the udev "
+                "rules on Linux, or try `sudo` as a fallback: "
+                "https://github.com/mvp/uhubctl#linux-usb-permissions\n"
+                f"stderr: {result.get('stderr_tail')!r}"
+            )
+    return result
+
+
+# ---------- List / parse ---------------------------------------------------
+
+
+def parse_list_output(output: str) -> list[dict[str, Any]]:
+    """Parse the default `uhubctl` stdout into structured hubs.
+
+    Each hub: {
+        "location":   "1-1.3",
+        "descriptor": "2109:2817 VIA Labs ...",
+        "vid":        0x2109,
+        "pid":        0x2817,
+        "ppps":       bool,
+        "ports":      [{"port": int, "status": str, "flags": str,
+                         "device_vid": int | None, "device_pid": int | None,
+                         "device_desc": str | None}, ...],
+    }
+    """
+    hubs: list[dict[str, Any]] = []
+    current: dict[str, Any] | None = None
+
+    for line in output.splitlines():
+        hm = _HUB_RE.match(line)
+        if hm:
+            descriptor = hm.group("descriptor")
+            hub_vid, hub_pid = None, None
+            vid_match = re.match(r"([0-9a-fA-F]{4}):([0-9a-fA-F]{4})", descriptor)
+            if vid_match:
+                hub_vid = int(vid_match.group(1), 16)
+                hub_pid = int(vid_match.group(2), 16)
+            current = {
+                "location": hm.group("location"),
+                "descriptor": descriptor,
+                "vid": hub_vid,
+                "pid": hub_pid,
+                "ppps": ", ppps" in descriptor or descriptor.endswith("ppps"),
+                "ports": [],
+            }
+            hubs.append(current)
+            continue
+
+        pm = _PORT_RE.match(line)
+        if pm and current is not None:
+            device_vid = pm.group("device_vid")
+            device_pid = pm.group("device_pid")
+            current["ports"].append(
+                {
+                    "port": int(pm.group("port")),
+                    "status": pm.group("status"),
+                    "flags": (pm.group("flags") or "").strip(),
+                    "device_vid": int(device_vid, 16) if device_vid else None,
+                    "device_pid": int(device_pid, 16) if device_pid else None,
+                    "device_desc": (pm.group("device_desc") or "").strip() or None,
+                }
+            )
+    return hubs
+
+
+def list_hubs() -> list[dict[str, Any]]:
+    """Enumerate every hub uhubctl can see, with per-port device attachments.
+
+    Pure read — no power state changes. Useful as a pre-flight check before
+    a destructive `power_off` call.
+    """
+    result = _run_uhubctl([], timeout=15.0)
+    if result["exit_code"] != 0:
+        raise UhubctlError(
+            f"uhubctl list failed (exit {result['exit_code']}): {result.get('stderr_tail')!r}"
+        )
+    return parse_list_output(result["stdout"])
+
+
+# ---------- Lookup / resolution -------------------------------------------
+
+
+def find_port_for_vid(
+    vid: int, pid: int | None = None, *, only_ppps: bool = True
+) -> list[tuple[str, int]]:
+    """Return ALL (location, port) matches for a device VID (optionally +PID).
+
+    `only_ppps=True` filters out hubs that don't advertise PPPS — we can't
+    control them anyway. Callers that want to diagnose a missing device can
+    pass `only_ppps=False` to see if the device is on a non-controllable
+    hub (and raise a clearer error).
+    """
+    hubs = list_hubs()
+    matches: list[tuple[str, int]] = []
+    for hub in hubs:
+        if only_ppps and not hub["ppps"]:
+            continue
+        for port in hub["ports"]:
+            if port["device_vid"] != vid:
+                continue
+            if pid is not None and port["device_pid"] != pid:
+                continue
+            matches.append((hub["location"], port["port"]))
+    return matches
+
+
+def resolve_target(role: str) -> tuple[str, int]:
+    """Resolve a Meshtastic role to (hub_location, port_number).
+
+    Priority:
+      1. Env vars `MESHTASTIC_UHUBCTL_LOCATION_<ROLE>` + `_PORT_<ROLE>`
+         (e.g. `MESHTASTIC_UHUBCTL_LOCATION_NRF52=1-1.3`, `_PORT_NRF52=2`).
+      2. VID auto-detect against `ROLE_VIDS[role]`, taking the first PPPS
+         match.
+
+    Raises `UhubctlError` on ambiguity (multiple matches) or no-match. The
+    env-var path exists specifically to disambiguate when two devices share
+    a VID.
+    """
+    role = _normalize_role(role)
+    env_key_loc = f"MESHTASTIC_UHUBCTL_LOCATION_{role.upper()}"
+    env_key_port = f"MESHTASTIC_UHUBCTL_PORT_{role.upper()}"
+    loc = os.environ.get(env_key_loc)
+    port_str = os.environ.get(env_key_port)
+    if loc and port_str:
+        try:
+            return (loc, int(port_str))
+        except ValueError as exc:
+            raise UhubctlError(
+                f"{env_key_port}={port_str!r} is not a valid integer"
+            ) from exc
+
+    if role not in ROLE_VIDS:
+        raise UhubctlError(
+            f"unknown role {role!r}; known roles: {sorted(ROLE_VIDS)}. "
+            f"Set {env_key_loc} + {env_key_port} to pin manually."
+        )
+
+    matches: list[tuple[str, int]] = []
+    for vid in ROLE_VIDS[role]:
+        matches.extend(find_port_for_vid(vid))
+
+    if not matches:
+        vids = ", ".join(f"0x{v:04x}" for v in ROLE_VIDS[role])
+        raise UhubctlError(
+            f"no controllable hub hosts a device with VID in {{{vids}}} "
+            f"for role={role!r}. Check the device is plugged into a "
+            f"PPPS-capable hub, or pin manually via {env_key_loc} + {env_key_port}."
+        )
+    if len(matches) > 1:
+        shown = ", ".join(f"{loc}:port{p}" for loc, p in matches)
+        raise UhubctlError(
+            f"ambiguous: multiple devices match role={role!r} ({shown}). "
+            f"Pin the target via {env_key_loc} + {env_key_port}."
+        )
+    return matches[0]
+
+
+# ---------- Power actions --------------------------------------------------
+
+
+def _action(
+    action: str,
+    location: str,
+    port: int,
+    *,
+    delay_s: int | None = None,
+    timeout: float = 30.0,
+) -> dict[str, Any]:
+    args: list[str] = ["-a", action, "-l", location, "-p", str(port)]
+    if delay_s is not None:
+        args.extend(["-d", str(delay_s)])
+    # Suppress verbose "before" printout so our parser doesn't have to skip it.
+    args.append("-N")
+    result = _run_uhubctl(args, timeout=timeout)
+    if result["exit_code"] != 0:
+        raise UhubctlError(
+            f"uhubctl -a {action} -l {location} -p {port} failed "
+            f"(exit {result['exit_code']}): {result.get('stderr_tail')!r}"
+        )
+    return {
+        "action": action,
+        "location": location,
+        "port": port,
+        "delay_s": delay_s,
+        "duration_s": result["duration_s"],
+    }
+
+
+def power_on(location: str, port: int) -> dict[str, Any]:
+    """Drive the port VBUS high. Device re-enumerates in 1-3 s on healthy hubs."""
+    return _action("on", location, port)
+
+
+def power_off(location: str, port: int) -> dict[str, Any]:
+    """Drive the port VBUS low. Device disappears from `list_devices` immediately."""
+    return _action("off", location, port)
+
+
+def cycle(location: str, port: int, delay_s: int = 2) -> dict[str, Any]:
+    """Off → wait `delay_s` → on. The common hard-reset pattern."""
+    # uhubctl's own `-a cycle` handles the delay internally; we use a
+    # slightly longer timeout to accommodate delay_s + enumeration.
+    return _action("cycle", location, port, delay_s=delay_s, timeout=30.0 + delay_s * 2)
+
+
+__all__ = [
+    "ROLE_VIDS",
+    "UhubctlError",
+    "cycle",
+    "find_port_for_vid",
+    "list_hubs",
+    "parse_list_output",
+    "power_off",
+    "power_on",
+    "resolve_target",
+]

mcp-server/src/meshtastic_mcp/userprefs.py

@@ -393,6 +393,7 @@ def build_testing_profile(
     long_name: str | None = None,
     disable_mqtt: bool = True,
     disable_position: bool = False,
+    enable_ui_log: bool = False,
 ) -> dict[str, Any]:
     """Build a USERPREFS dict for an isolated test-mesh device.
 
@@ -423,6 +424,10 @@ def build_testing_profile(
             traffic never leaks to a public broker.
         disable_position: if True, disables GPS + position broadcasts — useful
             when test devices sit on a bench without antennas.
+        enable_ui_log: if True, stamps `USERPREFS_UI_TEST_LOG=true` so the
+            firmware emits one `Screen: frame N/M name=... reason=...` log
+            line per frame transition. Test-only; off by default because the
+            log is chatty (multiple times per second during UI interaction).
 
     """
     if region not in KNOWN_REGIONS:
@@ -475,6 +480,9 @@ def build_testing_profile(
         prefs["USERPREFS_CONFIG_OWNER_LONG_NAME"] = long_name
     if short_name is not None:
         prefs["USERPREFS_CONFIG_OWNER_SHORT_NAME"] = short_name
+    if enable_ui_log:
+        # Consumed by `#ifdef USERPREFS_UI_TEST_LOG` in src/graphics/Screen.cpp.
+        prefs["USERPREFS_UI_TEST_LOG"] = True
 
     return prefs
 

mcp-server/tests/_power.py

@@ -0,0 +1,112 @@
+"""USB hub power control for tests — thin composition of the `uhubctl`
+module + `_port_discovery.resolve_port_by_role`.
+
+Why separate from the production module:
+- `meshtastic_mcp.uhubctl.cycle` returns as soon as uhubctl exits (VBUS is
+  back on, but the device hasn't finished enumerating as a CDC port yet).
+- Tests that want to immediately issue a `connect(port=...)` need the NEW
+  `/dev/cu.*` path, which can differ from the pre-cycle path on nRF52
+  boards (CDC re-enumeration assigns a fresh `cu.usbmodemNNNN`).
+- `resolve_port_by_role` already handles that wait + path-resolution for
+  the `factory_reset` flow. Composing the two gives a one-call helper.
+
+Also exposes `is_uhubctl_available()` so fixtures can skip cleanly when
+uhubctl isn't installed — we never want "no uhubctl" to look like a test
+failure.
+"""
+
+from __future__ import annotations
+
+import time
+from typing import Any
+
+from meshtastic_mcp import config as config_mod
+from meshtastic_mcp import uhubctl as uhubctl_mod
+
+from ._port_discovery import resolve_port_by_role
+
+
+def is_uhubctl_available() -> bool:
+    """Return True iff `config.uhubctl_bin()` resolves AND the binary is callable.
+
+    Soft-fails silently — fixtures use this to `pytest.skip` with an
+    actionable message when the operator hasn't installed uhubctl.
+    """
+    try:
+        config_mod.uhubctl_bin()
+    except Exception:  # noqa: BLE001
+        return False
+    # Do NOT actually invoke uhubctl here — on macOS a non-sudo run would
+    # fail, which is a config issue, not a tool-missing issue. That gets
+    # surfaced to the user when they actually run a recovery action.
+    return True
+
+
+def power_on(role: str) -> dict[str, Any]:
+    """Power on the hub port hosting `role`. Does NOT wait for re-enumeration.
+    Use `power_cycle` or follow with `resolve_port_by_role` to block on readiness.
+    """
+    loc, port = uhubctl_mod.resolve_target(role)
+    return uhubctl_mod.power_on(loc, port)
+
+
+def power_off(role: str) -> dict[str, Any]:
+    """Power off the hub port hosting `role`. The device disappears from
+    `list_devices` immediately.
+    """
+    loc, port = uhubctl_mod.resolve_target(role)
+    return uhubctl_mod.power_off(loc, port)
+
+
+def power_cycle(
+    role: str,
+    *,
+    delay_s: int = 2,
+    rediscover_timeout_s: float = 30.0,
+) -> str:
+    """Cycle the port hosting `role`, wait for re-enumeration, return the
+    new port path.
+
+    On nRF52 the post-cycle path typically matches the pre-cycle path, but
+    macOS may assign a different `/dev/cu.usbmodemNNNN` if the previous
+    CDC endpoint hasn't been fully released. `resolve_port_by_role`
+    handles that transparently.
+    """
+    loc, port = uhubctl_mod.resolve_target(role)
+    uhubctl_mod.cycle(loc, port, delay_s=delay_s)
+    # After uhubctl exits, VBUS is on but the device may still be in
+    # bootloader init. Give it ~500 ms head-start before polling so we
+    # don't spam list_devices pointlessly.
+    time.sleep(0.5)
+    return resolve_port_by_role(role, timeout_s=rediscover_timeout_s)
+
+
+def wait_for_absence(role: str, *, timeout_s: float = 10.0) -> None:
+    """Block until a device matching `role` is NOT in `list_devices`.
+
+    Used by the recovery tier to assert power_off actually took effect.
+    Raises TimeoutError on failure.
+    """
+    from meshtastic_mcp import devices as devices_mod
+
+    from ._port_discovery import _ROLE_VIDS, _coerce_vid  # type: ignore[attr-defined]
+
+    if role not in _ROLE_VIDS:
+        raise ValueError(f"unknown role {role!r}")
+    wanted = _ROLE_VIDS[role]
+    deadline = time.monotonic() + timeout_s
+    while time.monotonic() < deadline:
+        found = devices_mod.list_devices(include_unknown=True)
+        if not any(_coerce_vid(d.get("vid")) in wanted for d in found):
+            return
+        time.sleep(0.3)
+    raise TimeoutError(f"role {role!r} still visible after {timeout_s}s of power_off")
+
+
+__all__ = [
+    "is_uhubctl_available",
+    "power_cycle",
+    "power_off",
+    "power_on",
+    "wait_for_absence",
+]

mcp-server/tests/conftest.py

@@ -123,15 +123,24 @@ def pytest_collection_modifyitems(
             return (2, item.nodeid)
         if "/monitor/" in path or "tests/monitor" in path:
             return (3, item.nodeid)
-        if "/fleet/" in path or "tests/fleet" in path:
+        # Recovery tier: explicitly cycles device power via uhubctl. Slots
+        # between monitor (read-only) and ui (state-preserving) so any tier
+        # after it starts from a known re-enumerated + re-verified state.
+        if "/recovery/" in path or "tests/recovery" in path:
             return (4, item.nodeid)
+        # UI tier slots here — read-only w.r.t. mesh state, only mutates
+        # the on-screen UI (BACK×5 guard restores home before each test).
+        if "/ui/" in path or "tests/ui" in path:
+            return (5, item.nodeid)
+        if "/fleet/" in path or "tests/fleet" in path:
+            return (6, item.nodeid)
         # State-mutating tiers run last.
         if "/admin/" in path or "tests/admin" in path:
-            return (5, item.nodeid)
+            return (7, item.nodeid)
         if "/provisioning/" in path or "tests/provisioning" in path:
-            return (6, item.nodeid)
+            return (8, item.nodeid)
         # Top-level + anything else falls between.
-        return (7, item.nodeid)
+        return (9, item.nodeid)
 
     items.sort(key=sort_key)
 
@@ -156,13 +165,20 @@ def session_seed(request: pytest.FixtureRequest) -> str:
 
 @pytest.fixture(scope="session")
 def test_profile(session_seed: str) -> dict[str, Any]:
-    """The canonical isolated-mesh test profile for this session."""
+    """The canonical isolated-mesh test profile for this session.
+
+    `enable_ui_log=True` stamps `USERPREFS_UI_TEST_LOG` so the firmware
+    emits `Screen: frame N/M name=... reason=...` log lines per UI
+    transition — consumed by the `tests/ui/` tier. Harmless on boards
+    without a screen (the `#ifdef` sits behind `HAS_SCREEN`).
+    """
     return userprefs.build_testing_profile(
         psk_seed=session_seed,
         channel_name="McpTest",
         channel_num=88,
         region="US",
         modem_preset="LONG_FAST",
+        enable_ui_log=True,
     )
 
 
@@ -654,6 +670,7 @@ def pytest_generate_tests(metafunc: pytest.Metafunc) -> None:
 def baked_single(
     baked_mesh: dict[str, Any],
     baked_single_role: str,
+    hub_devices: dict[str, str],
 ) -> dict[str, Any]:
     """Function-scoped: a single verified baked device.
 
@@ -662,10 +679,75 @@ def baked_single(
     (e.g. `test_owner_survives_reboot[nrf52]` +
     `test_owner_survives_reboot[esp32s3]`). Tests never hardcode a role
     and never skip a device that happens to be connected.
+
+    Auto-recovery: if the baked device fails a pre-test `device_info` probe
+    AND uhubctl is available, power-cycle the port once and retry. Without
+    uhubctl, surface the wedge as a clear skip. This catches "device got
+    stuck between tests" without masking persistent regressions (a second
+    wedge after cycling still skips).
     """
     if baked_single_role not in baked_mesh:
         pytest.skip(f"role {baked_single_role!r} not present on the hub")
-    return {"role": baked_single_role, **baked_mesh[baked_single_role]}
+
+    entry = baked_mesh[baked_single_role]
+    port = entry.get("port")
+    if port:
+        try:
+            _run_with_timeout(lambda: info.device_info(port=port, timeout_s=3.0), 5.0)
+        except Exception:
+            # Device didn't respond. Try a power-cycle recovery if uhubctl
+            # is installed; otherwise surface a skip that names the root
+            # cause clearly.
+            from tests import _power
+
+            if not _power.is_uhubctl_available():
+                pytest.skip(
+                    f"device {baked_single_role!r} unresponsive on {port}; "
+                    "install uhubctl (`brew install uhubctl` / `apt install "
+                    "uhubctl`) for auto power-cycle recovery"
+                )
+            try:
+                new_port = _power.power_cycle(baked_single_role, delay_s=2)
+            except Exception as exc:  # noqa: BLE001
+                pytest.skip(
+                    f"device {baked_single_role!r} wedged and power-cycle "
+                    f"failed: {exc}"
+                )
+            # Mutate both the session-scoped `hub_devices` map AND the
+            # baked_mesh entry so downstream fixtures see the recovered port.
+            hub_devices[baked_single_role] = new_port
+            baked_mesh[baked_single_role]["port"] = new_port
+            entry = baked_mesh[baked_single_role]
+    return {"role": baked_single_role, **entry}
+
+
+@pytest.fixture
+def power_cycle(
+    hub_devices: dict[str, str],
+) -> Callable[..., str]:
+    """Return a callable `(role, delay_s=2) -> new_port` that hard-resets the
+    hub port hosting `role`. Skips the test cleanly when uhubctl isn't
+    installed — never want "no uhubctl" to look like a test failure.
+
+    The callable mutates `hub_devices[role]` in place so subsequent fixture
+    lookups pick up the post-cycle port (mirrors the pattern in
+    provisioning/test_userprefs_survive_factory_reset.py).
+    """
+    from tests import _power
+
+    if not _power.is_uhubctl_available():
+        pytest.skip(
+            "uhubctl not installed; this test needs it for power control. "
+            "Install via `brew install uhubctl` (macOS) or `apt install "
+            "uhubctl` (Debian/Ubuntu)."
+        )
+
+    def _cycle(role: str, delay_s: int = 2) -> str:
+        new_port = _power.power_cycle(role, delay_s=delay_s)
+        hub_devices[role] = new_port
+        return new_port
+
+    return _cycle
 
 
 _DEFAULT_ROLE_ENVS = {
@@ -960,6 +1042,45 @@ def _run_with_timeout(fn: Callable[[], Any], timeout: float) -> Any:
             raise TimeoutError(f"operation did not complete within {timeout}s") from exc
 
 
+def _attach_ui_captures(item: pytest.Item, report: Any) -> None:
+    """Embed per-step UI captures (PNG + OCR) into the pytest-html extras.
+
+    Runs for every UI-tier test on BOTH pass and fail so the HTML report
+    always shows the image strip + OCR transcript. Silently no-ops if
+    pytest-html isn't installed or the test didn't use `frame_capture`.
+    """
+    captures = getattr(item, "_ui_captures", None)
+    if not captures:
+        return
+    try:
+        from pytest_html import extras as html_extras  # type: ignore[import-untyped]
+    except ImportError:
+        return
+
+    existing = getattr(report, "extras", None) or []
+    extras_list = list(existing)
+    for cap in captures:
+        png_path = cap.get("png_path")
+        label = f"{cap.get('step', '?')}: {cap.get('label', '')}"
+        frame = cap.get("frame") or {}
+        frame_str = (
+            f" — frame {frame.get('idx')} {frame.get('name')!r}" if frame else ""
+        )
+        if png_path:
+            try:
+                with open(png_path, "rb") as fh:
+                    import base64
+
+                    b64 = base64.b64encode(fh.read()).decode("ascii")
+                extras_list.append(html_extras.png(b64, name=f"{label}{frame_str}"))
+            except OSError:
+                pass
+        ocr = (cap.get("ocr_text") or "").strip()
+        if ocr:
+            extras_list.append(html_extras.text(ocr, name=f"OCR: {label}{frame_str}"))
+    report.extras = extras_list  # type: ignore[attr-defined]
+
+
 @pytest.hookimpl(hookwrapper=True)
 def pytest_runtest_makereport(item: pytest.Item, call: pytest.CallInfo[Any]) -> Any:
     """On test failure, attach serial capture + device state as report artifacts.
@@ -967,10 +1088,20 @@ def pytest_runtest_makereport(item: pytest.Item, call: pytest.CallInfo[Any]) ->
     Hard-bounded by `_run_with_timeout` — if the device is unreachable (stuck
     port, unbaked firmware, dead board), the dump is skipped rather than
     hanging the session.
+
+    For UI-tier tests, also embeds per-step camera captures + OCR on every
+    test (pass or fail) so the HTML report shows visual evidence of what
+    the device did.
     """
     outcome = yield
     report = outcome.get_result()
 
+    # Attach UI captures on any outcome (pass + fail) — these are the whole
+    # point of the UI tier. Do this before the failure-only branch below so
+    # passing tests still get their image strip.
+    if report.when == "call":
+        _attach_ui_captures(item, report)
+
     if report.when != "call" or report.outcome != "failed":
         return
 

mcp-server/tests/mesh/test_peer_offline_recovery.py

@@ -0,0 +1,155 @@
+"""Isolation test for peer-offline-then-back mid-conversation.
+
+Verifies the mesh stack's behavior when a peer is physically powered
+off mid-send via uhubctl, then powered back on.
+
+Flow (parametrized over every directed mesh_pair):
+  1. Bilateral PKI warmup (same pattern as test_direct_with_ack).
+  2. TX sends a broadcast text "msg-1" — RX confirms receipt via pubsub.
+  3. Power OFF RX via uhubctl. The RX device disappears from the OS.
+  4. TX sends a directed text "msg-2" with wantAck=True. Firmware retries
+     internally for ~30s before giving up. Assertion: the packet object
+     was accepted by the TX stack (non-None) — we don't assert an ACK
+     since there's no peer to send one.
+  5. Power ON RX. Wait for re-enumeration + boot.
+  6. Bilateral PKI re-nudge — RX's in-RAM PKI cache was wiped on reboot,
+     so the first directed send may err=35 without a fresh NodeInfo ping.
+  7. TX sends a directed "msg-3" — RX receives it via pubsub, confirming
+     the mesh recovered.
+
+Skips cleanly if uhubctl isn't installed (via the `power_cycle` fixture's
+auto-skip). Skips for pair directions where RX isn't power-controllable
+(e.g. a USB-IF hub that doesn't support PPPS for its port).
+"""
+
+from __future__ import annotations
+
+import time
+from typing import Any
+
+import pytest
+from meshtastic_mcp.connection import connect
+from tests import _power
+from tests._port_discovery import resolve_port_by_role
+
+from ._receive import ReceiveCollector, nudge_nodeinfo
+
+
+@pytest.mark.timeout(360)
+def test_peer_offline_then_recovers(
+    mesh_pair: dict[str, Any],
+    power_cycle,  # noqa: ARG001 — forces uhubctl-availability skip
+    hub_devices: dict[str, str],
+) -> None:
+    tx_port = mesh_pair["tx"]["port"]
+    rx_node_num = mesh_pair["rx"]["my_node_num"]
+    tx_role = mesh_pair["tx_role"]
+    rx_role = mesh_pair["rx_role"]
+
+    unique_pre = f"peer-offline-pre-{tx_role}-to-{rx_role}-{int(time.time())}"
+    unique_post = f"peer-offline-post-{tx_role}-to-{rx_role}-{int(time.time())}"
+
+    # Step 1 + 2: warm up + confirm baseline delivery works before the test.
+    with ReceiveCollector(
+        mesh_pair["rx"]["port"], topic="meshtastic.receive.text"
+    ) as rx:
+        rx.broadcast_nodeinfo_ping()
+        with connect(port=tx_port) as tx_iface:
+            nudge_nodeinfo(tx_iface)
+            # Wait for bilateral PKI (RX pubkey in TX's nodesByNum).
+            deadline = time.monotonic() + 45.0
+            last_nudge = time.monotonic()
+            while time.monotonic() < deadline:
+                rec = (tx_iface.nodesByNum or {}).get(rx_node_num, {})
+                if rec.get("user", {}).get("publicKey"):
+                    break
+                if time.monotonic() - last_nudge > 15.0:
+                    rx.broadcast_nodeinfo_ping()
+                    nudge_nodeinfo(tx_iface)
+                    last_nudge = time.monotonic()
+                time.sleep(1.0)
+            else:
+                pytest.skip(
+                    f"bilateral PKI never completed ({tx_role}→{rx_role}); "
+                    "can't run the offline test without a warm baseline"
+                )
+
+            tx_iface.sendText(unique_pre, destinationId=rx_node_num, wantAck=True)
+            got = rx.wait_for(
+                lambda pkt: pkt.get("decoded", {}).get("text") == unique_pre,
+                timeout=30,
+            )
+            assert got is not None, (
+                f"baseline directed send ({tx_role}→{rx_role}) didn't land — "
+                "skipping offline test to avoid false positive"
+            )
+
+    # Step 3: power off RX. uhubctl skips the test with a clear message if
+    # the RX role isn't on a controllable hub.
+    try:
+        _power.power_off(rx_role)
+    except Exception as exc:  # noqa: BLE001
+        pytest.skip(f"can't power-control {rx_role!r}: {exc}")
+
+    try:
+        _power.wait_for_absence(rx_role, timeout_s=10.0)
+    except TimeoutError:
+        _power.power_on(rx_role)  # restore hub state before failing
+        resolve_port_by_role(rx_role, timeout_s=30.0)
+        pytest.fail(f"{rx_role!r} didn't disappear after power_off")
+
+    # Step 4: send to a peer that isn't there. Firmware will retry
+    # internally. We don't wait for an ACK (there won't be one); we just
+    # confirm TX's stack accepts the packet without crashing.
+    try:
+        with connect(port=tx_port) as tx_iface:
+            packet = tx_iface.sendText(
+                f"while-offline-{rx_role}",
+                destinationId=rx_node_num,
+                wantAck=True,
+            )
+            assert packet is not None
+            # Give firmware a moment to do a retry or two while RX is down.
+            time.sleep(5.0)
+    except Exception as exc:  # noqa: BLE001 — TX should survive the peer being gone
+        # Restore RX before reraising so the bench state is sane.
+        _power.power_on(rx_role)
+        resolve_port_by_role(rx_role, timeout_s=30.0)
+        raise AssertionError(f"TX crashed when sending to offline peer: {exc}") from exc
+
+    # Step 5: power RX back on + rediscover.
+    _power.power_on(rx_role)
+    time.sleep(0.5)
+    new_rx_port = resolve_port_by_role(rx_role, timeout_s=30.0)
+    hub_devices[rx_role] = new_rx_port
+
+    # Step 6 + 7: bilateral re-warmup + directed send that should now work.
+    with ReceiveCollector(new_rx_port, topic="meshtastic.receive.text") as rx:
+        # RX rebooted → its PKI cache is gone. Re-warm.
+        rx.broadcast_nodeinfo_ping()
+        with connect(port=tx_port) as tx_iface:
+            nudge_nodeinfo(tx_iface)
+            time.sleep(3.0)
+
+            got = None
+            for _attempt in range(3):
+                packet = tx_iface.sendText(
+                    unique_post,
+                    destinationId=rx_node_num,
+                    wantAck=True,
+                )
+                assert packet is not None
+                got = rx.wait_for(
+                    lambda pkt: pkt.get("decoded", {}).get("text") == unique_post,
+                    timeout=30,
+                )
+                if got is not None:
+                    break
+                rx.broadcast_nodeinfo_ping()
+                nudge_nodeinfo(tx_iface)
+                time.sleep(5.0)
+
+    assert got is not None, (
+        f"post-recovery directed send {unique_post!r} ({tx_role}→{rx_role}) "
+        "never landed — recovery path may be broken"
+    )

mcp-server/tests/recovery/__init__.py

@@ -0,0 +1,6 @@
+"""Recovery tier — exercises `uhubctl` power control end-to-end.
+
+Requires `uhubctl` installed AND at least one connected device on a
+PPPS-capable hub. The whole tier skips cleanly via
+`tests/recovery/conftest.py::_recovery_tier_guard` when either is missing.
+"""

mcp-server/tests/recovery/conftest.py

@@ -0,0 +1,44 @@
+"""Recovery-tier gating + shared helpers.
+
+Session-scoped guard skips the whole tier when uhubctl isn't installed.
+Tests under this directory assume uhubctl is callable AND that at least
+one hub role is detected on a PPPS-capable port.
+"""
+
+from __future__ import annotations
+
+import pytest
+
+
+@pytest.fixture(scope="session", autouse=True)
+def _recovery_tier_guard() -> None:
+    """Skip the tier when uhubctl is unavailable OR no device is on a
+    PPPS-capable hub. Prints the specific reason so operators know what
+    to fix."""
+    from tests import _power
+
+    if not _power.is_uhubctl_available():
+        pytest.skip(
+            "uhubctl not installed; recovery tier needs it. "
+            "Install via `brew install uhubctl` or `apt install uhubctl`.",
+            allow_module_level=True,
+        )
+
+    # Probe: can we even list hubs? (A macOS user without sudo gets a
+    # permission error here — we'd rather find out once at tier-start than
+    # 6 tests later.)
+    from meshtastic_mcp import uhubctl
+
+    try:
+        hubs = uhubctl.list_hubs()
+    except uhubctl.UhubctlError as exc:
+        pytest.skip(
+            f"uhubctl list failed: {exc}. Try the udev rules or `sudo` as a fallback.",
+            allow_module_level=True,
+        )
+
+    if not any(h["ppps"] for h in hubs):
+        pytest.skip(
+            "no PPPS-capable hubs detected — recovery tier has nothing to exercise.",
+            allow_module_level=True,
+        )

mcp-server/tests/recovery/test_list_hubs.py

@@ -0,0 +1,43 @@
+"""Smoke test: `uhubctl_list` returns a well-formed structure.
+
+No destructive action. Runs first in the tier as a sanity check that the
+tier's dependencies (uhubctl binary + permissions) are actually satisfied.
+"""
+
+from __future__ import annotations
+
+import pytest
+from meshtastic_mcp import uhubctl
+
+
+@pytest.mark.timeout(30)
+def test_list_hubs_returns_at_least_one_ppps_hub() -> None:
+    hubs = uhubctl.list_hubs()
+    assert hubs, "uhubctl found no hubs at all — is a USB hub connected?"
+    assert any(h["ppps"] for h in hubs), (
+        "no PPPS-capable hubs detected; power control won't work. "
+        "Check that the hub supports Per-Port Power Switching."
+    )
+
+
+@pytest.mark.timeout(30)
+def test_list_hubs_structure(hub_devices: dict[str, str]) -> None:
+    hubs = uhubctl.list_hubs()
+    for hub in hubs:
+        assert "location" in hub and hub["location"]
+        assert "ports" in hub and isinstance(hub["ports"], list)
+        for port in hub["ports"]:
+            assert "port" in port and isinstance(port["port"], int)
+            assert "status" in port
+
+    # At least one of the detected Meshtastic roles should show up in some
+    # port's device_vid — otherwise the recovery tier can't drive them.
+    seen_vids = {
+        p["device_vid"] for h in hubs for p in h["ports"] if p["device_vid"] is not None
+    }
+    expected_any = {0x239A, 0x303A, 0x10C4} & seen_vids
+    assert expected_any or not hub_devices, (
+        f"hub_devices detected roles {list(hub_devices)} but uhubctl sees "
+        f"VIDs {sorted(hex(v) for v in seen_vids)} — the devices may be on "
+        "a hub that uhubctl can't see (e.g. built-in laptop ports)."
+    )

mcp-server/tests/recovery/test_power_cycle_preserves_userprefs.py

@@ -0,0 +1,60 @@
+"""Hard reset via uhubctl must NOT wipe NVS. Verify the test profile's
+region + channel survive a power-cycle.
+
+Guards against a regression where a firmware change treats unexpected
+power loss as a factory-reset trigger (e.g. bad EEPROM wear-leveling,
+erase-on-boot-for-safety). Such a regression would be catastrophic for
+field deployments.
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp import admin, info
+from tests import _power
+from tests._port_discovery import resolve_port_by_role
+
+
+@pytest.mark.timeout(180)
+def test_lora_config_survives_power_cycle(
+    baked_single: dict[str, object],
+    test_profile: dict[str, object],
+) -> None:
+    role = baked_single["role"]
+    pre_port = baked_single["port"]
+
+    pre_config = admin.get_config(section="lora", port=pre_port)["config"]["lora"]
+    pre_region = pre_config.get("region")
+    pre_preset = pre_config.get("modem_preset")
+    assert pre_region, f"lora.region not set pre-cycle on {role}"
+
+    # Hard power-cycle.
+    _power.power_cycle(role, delay_s=2)
+    time.sleep(0.5)
+    new_port = resolve_port_by_role(role, timeout_s=30.0)
+    # Let the firmware complete boot before admin reads.
+    time.sleep(2.0)
+    # Quick readiness probe.
+    probe = info.device_info(port=new_port, timeout_s=10.0)
+    assert (
+        probe.get("my_node_num") is not None
+    ), f"device {role!r} didn't respond after power-cycle"
+
+    post_config = admin.get_config(section="lora", port=new_port)["config"]["lora"]
+    post_region = post_config.get("region")
+    post_preset = post_config.get("modem_preset")
+
+    assert post_region == pre_region, (
+        f"lora.region wiped by power-cycle on {role}: "
+        f"pre={pre_region!r} post={post_region!r}"
+    )
+    assert post_preset == pre_preset, (
+        f"lora.modem_preset wiped by power-cycle on {role}: "
+        f"pre={pre_preset!r} post={post_preset!r}"
+    )
+
+    # Channel-0 name should also match the test profile.
+    pri_ch = admin.get_channel_url(port=new_port)
+    assert pri_ch.get("url"), f"channel URL empty after power-cycle on {role}"

mcp-server/tests/recovery/test_power_cycle_roundtrip.py

@@ -0,0 +1,61 @@
+"""Full power-cycle round-trip: off → verify gone → on → verify identity
+preserved.
+
+Parametrized over every connected role. Validates both the uhubctl
+plumbing AND that the device survives a hard reset with the same
+`my_node_num` (no firmware-level identity regeneration).
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp import info
+from tests import _power
+from tests._port_discovery import resolve_port_by_role
+
+
+@pytest.mark.timeout(180)
+def test_power_cycle_preserves_node_identity(
+    baked_single: dict[str, object],
+) -> None:
+    role = baked_single["role"]
+    pre_port = baked_single["port"]
+    pre_node_num = baked_single["my_node_num"]
+    pre_fw = baked_single.get("firmware_version")
+
+    # Record pre-cycle state.
+    pre_info = info.device_info(port=pre_port, timeout_s=5.0)
+    assert pre_info.get("my_node_num") == pre_node_num
+
+    # Power off; confirm the device actually disappears from list_devices.
+    _power.power_off(role)
+    try:
+        _power.wait_for_absence(role, timeout_s=10.0)
+    except TimeoutError:
+        # If it didn't disappear, power it back on so we don't leave the
+        # hub in a weird state for the next test.
+        _power.power_on(role)
+        resolve_port_by_role(role, timeout_s=30.0)
+        pytest.fail(f"device {role!r} stayed visible after power_off")
+
+    # Power back on + re-discover port.
+    _power.power_on(role)
+    time.sleep(0.5)  # head-start before polling
+    new_port = resolve_port_by_role(role, timeout_s=30.0)
+
+    # Give the firmware a moment to finish boot before we hit it with admin.
+    time.sleep(2.0)
+
+    post_info = info.device_info(port=new_port, timeout_s=10.0)
+    assert post_info.get("my_node_num") == pre_node_num, (
+        f"my_node_num changed across power-cycle: pre={pre_node_num:#x} "
+        f"post={post_info.get('my_node_num'):#x}"
+    )
+    # Firmware version must match (same bake, not a re-flash).
+    if pre_fw:
+        assert post_info.get("firmware_version") == pre_fw, (
+            f"firmware changed across cycle: pre={pre_fw} "
+            f"post={post_info.get('firmware_version')}"
+        )

mcp-server/tests/tool_coverage.py

@@ -73,6 +73,13 @@ _TOOL_MAP: dict[str, tuple[str, str]] = {
     "reboot": ("meshtastic_mcp.admin", "reboot"),
     "shutdown": ("meshtastic_mcp.admin", "shutdown"),
     "factory_reset": ("meshtastic_mcp.admin", "factory_reset"),
+    "send_input_event": ("meshtastic_mcp.admin", "send_input_event"),
+    # `capture_screen` in server.py calls camera.get_camera — instrument that.
+    "capture_screen": ("meshtastic_mcp.camera", "get_camera"),
+    # USB power control via uhubctl.
+    "uhubctl_list": ("meshtastic_mcp.uhubctl", "list_hubs"),
+    "uhubctl_power": ("meshtastic_mcp.uhubctl", "power_on"),
+    "uhubctl_cycle": ("meshtastic_mcp.uhubctl", "cycle"),
     # USERPREFS
     "userprefs_manifest": ("meshtastic_mcp.userprefs", "build_manifest"),
     "userprefs_get": ("meshtastic_mcp.userprefs", "read_state"),

mcp-server/tests/ui/__init__.py

@@ -0,0 +1,7 @@
+"""UI tier — input-broker-driven screen navigation tests.
+
+Only runs when a screen-bearing role (esp32s3/heltec-v3) is present on the
+hub AND the firmware was baked with `enable_ui_log=True` (so the
+`Screen: frame N/M name=... reason=...` log lines are emitted). The
+`tests/ui/conftest.py` fixture forces that bake stamp.
+"""

mcp-server/tests/ui/_screen_log.py

@@ -0,0 +1,176 @@
+"""Parse `Screen: frame N/M name=X reason=Y` log lines from `_debug_log_buffer`.
+
+The firmware emits one line per frame transition when
+`USERPREFS_UI_TEST_LOG` is defined (see src/graphics/Screen.cpp). Tests use
+these helpers to assert which frame is shown / to wait for a transition to
+settle before taking a camera capture.
+"""
+
+from __future__ import annotations
+
+import re
+import time
+from dataclasses import dataclass
+from typing import Iterable, Iterator
+
+FRAME_RE = re.compile(
+    r"Screen: frame (?P<idx>\d+)/(?P<count>\d+) name=(?P<name>\S+) reason=(?P<reason>\S+)"
+)
+
+
+@dataclass(frozen=True)
+class FrameEvent:
+    idx: int
+    count: int
+    name: str
+    reason: str
+    raw: str
+
+    @classmethod
+    def parse(cls, line: str) -> "FrameEvent | None":
+        m = FRAME_RE.search(line)
+        if not m:
+            return None
+        return cls(
+            idx=int(m["idx"]),
+            count=int(m["count"]),
+            name=m["name"],
+            reason=m["reason"],
+            raw=line,
+        )
+
+
+def iter_frame_events(lines: Iterable[str]) -> Iterator[FrameEvent]:
+    for line in lines:
+        evt = FrameEvent.parse(line)
+        if evt is not None:
+            yield evt
+
+
+def get_current_frame(lines: list[str]) -> FrameEvent | None:
+    """Return the most recent FrameEvent in `lines`, or None if none found."""
+    for line in reversed(lines):
+        evt = FrameEvent.parse(line)
+        if evt is not None:
+            return evt
+    return None
+
+
+def wait_for_frame(
+    lines: list[str],
+    expected_name: str,
+    *,
+    timeout_s: float = 5.0,
+    poll_interval_s: float = 0.1,
+    reason: str | None = None,
+) -> FrameEvent:
+    """Poll `lines` (the `_debug_log_buffer`) until a FrameEvent with
+    `name=expected_name` appears after the call started. Raises TimeoutError
+    with context if it doesn't arrive in `timeout_s`.
+
+    `reason` optionally filters to events matching a specific cause
+    (e.g. `"fn_f1"`, `"next"`, `"rebuild"`).
+    """
+    start_idx = len(lines)
+    deadline = time.monotonic() + timeout_s
+    last: FrameEvent | None = None
+    while time.monotonic() < deadline:
+        # Scan only lines appended since we started waiting.
+        for line in lines[start_idx:]:
+            evt = FrameEvent.parse(line)
+            if evt is None:
+                continue
+            last = evt
+            if evt.name == expected_name and (reason is None or evt.reason == reason):
+                return evt
+        time.sleep(poll_interval_s)
+
+    seen = [e.name for e in iter_frame_events(lines[start_idx:])]
+    raise TimeoutError(
+        f"frame name={expected_name!r} reason={reason!r} not seen in {timeout_s}s; "
+        f"saw {len(seen)} transition(s): {seen!r}; last={last!r}"
+    )
+
+
+def wait_for_any_frame(
+    lines: list[str],
+    *,
+    timeout_s: float = 5.0,
+    poll_interval_s: float = 0.1,
+) -> FrameEvent:
+    """Wait for ANY frame transition to appear after call-start. Useful for
+    `no-op` tests that want to confirm a transition did NOT happen (via
+    TimeoutError) vs. one that did.
+    """
+    start_idx = len(lines)
+    deadline = time.monotonic() + timeout_s
+    while time.monotonic() < deadline:
+        for line in lines[start_idx:]:
+            evt = FrameEvent.parse(line)
+            if evt is not None:
+                return evt
+        time.sleep(poll_interval_s)
+    raise TimeoutError(f"no frame transition in {timeout_s}s")
+
+
+def wait_for_reason(
+    lines: list[str],
+    reason: str,
+    *,
+    timeout_s: float = 5.0,
+    poll_interval_s: float = 0.1,
+) -> FrameEvent:
+    """Wait for a frame event with `reason=<reason>` after call-start.
+
+    Matches only on `reason` — useful when the caller knows *why* a
+    transition should happen (e.g. `fn_f1`, `rebuild`) but not which named
+    frame the firmware will land on for this particular board.
+    """
+    start_idx = len(lines)
+    deadline = time.monotonic() + timeout_s
+    last: FrameEvent | None = None
+    while time.monotonic() < deadline:
+        for line in lines[start_idx:]:
+            evt = FrameEvent.parse(line)
+            if evt is None:
+                continue
+            last = evt
+            if evt.reason == reason:
+                return evt
+        time.sleep(poll_interval_s)
+    raise TimeoutError(
+        f"no frame with reason={reason!r} in {timeout_s}s; last={last!r}"
+    )
+
+
+def assert_no_frame_change(
+    lines: list[str],
+    *,
+    wait_s: float = 2.0,
+) -> None:
+    """Assert that NO new FrameEvent lines arrive within `wait_s`.
+
+    Used by idempotency / no-op tests (e.g. BACK on home frame).
+    """
+    start_idx = len(lines)
+    time.sleep(wait_s)
+    new = [
+        e for e in (FrameEvent.parse(ln) for ln in lines[start_idx:]) if e is not None
+    ]
+    if new:
+        raise AssertionError(
+            f"expected no frame change in {wait_s}s, but saw {len(new)} event(s): "
+            f"{[(e.reason, e.name) for e in new]!r}"
+        )
+
+
+__all__ = [
+    "FRAME_RE",
+    "FrameEvent",
+    "assert_no_frame_change",
+    "get_current_frame",
+    "iter_frame_events",
+    "wait_for_any_frame",
+    "wait_for_frame",
+    "wait_for_reason",
+]

mcp-server/tests/ui/conftest.py

@@ -0,0 +1,381 @@
+"""UI-tier fixtures: camera lifecycle, OCR warmup, per-test frame capture,
+and a `ui_home_state` autouse guard that resets to the home frame before
+every test (prevents state bleed if a prior test exited inside a menu).
+
+The camera + OCR modules live in `meshtastic_mcp/{camera,ocr}.py` (production
+code, so the `capture_screen` MCP tool can share them). These fixtures wire
+them into pytest + write per-test captures to `tests/ui_captures/…`.
+"""
+
+from __future__ import annotations
+
+import re
+import shutil
+import time
+from pathlib import Path
+from typing import Any, Iterator
+
+import pytest
+from meshtastic_mcp import admin as admin_mod
+from meshtastic_mcp import camera as camera_mod
+from meshtastic_mcp import ocr as ocr_mod
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import FrameEvent, get_current_frame, wait_for_frame
+
+# Roles that carry a screen the UI tier can drive. Only esp32s3 (heltec-v3
+# SSD1306) qualifies today — nrf52 (rak4631) has no display.
+UI_CAPABLE_ROLES = ("esp32s3",)
+
+# Where per-test captures land. One subdirectory per session seed, then per
+# sanitized test nodeid — identical pattern to other pytest artifacts.
+CAPTURES_ROOT = Path(__file__).resolve().parent.parent / "ui_captures"
+
+
+def _sanitize_nodeid(nodeid: str) -> str:
+    return re.sub(r"[^a-zA-Z0-9_.-]+", "_", nodeid)
+
+
+# ---------- Role gating ----------------------------------------------------
+
+
+@pytest.fixture
+def ui_capable_role(request: pytest.FixtureRequest, hub_devices: dict[str, Any]) -> str:
+    """Resolve the single role the UI tier drives.
+
+    Today that's `esp32s3`. Skips if the hub doesn't have one. A future
+    multi-screen hub could pick a role per parametrization.
+    """
+    for role in UI_CAPABLE_ROLES:
+        if role in hub_devices:
+            return role
+    pytest.skip(
+        f"no UI-capable role on hub; need one of {UI_CAPABLE_ROLES} in {sorted(hub_devices)}"
+    )
+
+
+@pytest.fixture
+def ui_port(ui_capable_role: str, hub_devices: dict[str, Any]) -> str:
+    port = (
+        hub_devices[ui_capable_role].get("port")
+        if isinstance(hub_devices[ui_capable_role], dict)
+        else hub_devices[ui_capable_role]
+    )
+    if not port:
+        pytest.skip(f"{ui_capable_role!r} has no usable port")
+    return port
+
+
+# ---------- Camera + OCR session fixtures ---------------------------------
+
+
+@pytest.fixture(scope="session")
+def camera(ui_capable_role_session: str | None) -> Iterator[camera_mod.CameraBackend]:
+    """Session-scoped camera backend. Closed at teardown.
+
+    Backend + device selected by env vars (see `meshtastic_mcp.camera`).
+    Falls through to `NullBackend` when no camera is configured, so the
+    tests run end-to-end on machines without hardware; they just won't
+    have useful images.
+    """
+    role = ui_capable_role_session or "esp32s3"
+    cam = camera_mod.get_camera(role)
+    try:
+        yield cam
+    finally:
+        cam.close()
+
+
+@pytest.fixture(scope="session")
+def ui_capable_role_session(hub_devices: dict[str, Any]) -> str | None:
+    """Session-scoped lookup mirroring `ui_capable_role` but non-skipping.
+
+    Used by the `camera` session fixture so it doesn't depend on a
+    test-scoped skip.
+    """
+    for role in UI_CAPABLE_ROLES:
+        if role in hub_devices:
+            return role
+    return None
+
+
+@pytest.fixture(scope="session", autouse=True)
+def _ocr_warm() -> None:
+    """Pay easyocr's ~100 MB / cold-start cost ONCE per session.
+
+    Subsequent `ocr_text()` calls hit the cached reader and return quickly.
+    Swallows errors — if OCR isn't installed, warm is a no-op.
+    """
+    try:
+        ocr_mod.warm()
+    except Exception:  # noqa: BLE001 — belt: never block the suite on OCR init
+        pass
+
+
+@pytest.fixture(scope="session")
+def _ui_screen_kept_on(
+    ui_capable_role_session: str | None, hub_devices: dict[str, Any]
+) -> Iterator[None]:
+    """Keep the OLED on throughout the UI tier so input events aren't dropped.
+
+    Why: `InputBroker::handleInputEvent` (src/input/InputBroker.cpp:118-122)
+    silently DROPS any event that arrives while the screen is off — it just
+    wakes the screen and returns. Every first event in each test would
+    disappear. We set `display.screen_on_secs = 86400` at session start
+    (effectively "always on" for the test window) and restore the prior
+    value at teardown.
+    """
+    if ui_capable_role_session is None:
+        yield
+        return
+
+    hub_entry = hub_devices[ui_capable_role_session]
+    port = hub_entry.get("port") if isinstance(hub_entry, dict) else hub_entry
+    if not port:
+        yield
+        return
+
+    original: int | None = None
+    try:
+        current = admin_mod.get_config(section="display", port=port)
+        original = int(
+            current.get("config", {}).get("display", {}).get("screen_on_secs") or 0
+        )
+    except Exception:  # noqa: BLE001
+        pass
+
+    try:
+        admin_mod.set_config("display.screen_on_secs", 86400, port=port)
+        # Send one wake event so the screen is actually ON going into the
+        # first test. The event itself gets dropped (screenWasOff), but the
+        # wake side-effect sticks.
+        try:
+            admin_mod.send_input_event(event_code=int(InputEventCode.FN_F1), port=port)
+        except Exception:  # noqa: BLE001
+            pass
+        time.sleep(1.5)  # Let the screen finish its wake transition.
+    except (
+        Exception
+    ):  # noqa: BLE001 — best-effort; ui_home_state surfaces the real error
+        pass
+
+    try:
+        yield
+    finally:
+        if original is not None:
+            try:
+                admin_mod.set_config("display.screen_on_secs", original, port=port)
+            except Exception:  # noqa: BLE001
+                pass
+
+
+# ---------- Per-test capture + transcript ----------------------------------
+
+
+class FrameCapture:
+    """Per-test capture recorder. Created once per test via the
+    `frame_capture` fixture; call with a label to snapshot the screen.
+    """
+
+    def __init__(
+        self,
+        cam: camera_mod.CameraBackend,
+        dir_path: Path,
+        lines: list[str],
+        nodeid: str,
+    ) -> None:
+        self._cam = cam
+        self._dir = dir_path
+        self._lines = lines
+        self._nodeid = nodeid
+        self._step = 0
+        self.captures: list[dict[str, Any]] = []
+        self._transcript_path = dir_path / "transcript.md"
+        self._dir.mkdir(parents=True, exist_ok=True)
+        self._transcript_path.write_text(
+            f"# {nodeid} — {time.strftime('%Y-%m-%dT%H:%M:%SZ', time.gmtime())}\n\n",
+            encoding="utf-8",
+        )
+
+    def __call__(self, label: str) -> dict[str, Any]:
+        self._step += 1
+        stem = f"{self._step:03d}-{re.sub(r'[^a-zA-Z0-9_-]+', '-', label)}"
+        png_path = self._dir / f"{stem}.png"
+        ocr_path = self._dir / f"{stem}.ocr.txt"
+
+        try:
+            png = self._cam.capture()
+        except Exception as exc:  # noqa: BLE001
+            png = b""
+            ocr_str = f"[capture error: {exc}]"
+        else:
+            camera_mod.save_capture(png, png_path)
+            try:
+                ocr_str = ocr_mod.ocr_text(png)
+            except Exception as exc:  # noqa: BLE001
+                ocr_str = f"[ocr error: {exc}]"
+            ocr_path.write_text(ocr_str or "", encoding="utf-8")
+
+        frame = get_current_frame(self._lines)
+        entry: dict[str, Any] = {
+            "step": self._step,
+            "label": label,
+            "png_path": str(png_path) if png else None,
+            "ocr_text": ocr_str,
+            "frame": (
+                {
+                    "idx": frame.idx,
+                    "name": frame.name,
+                    "reason": frame.reason,
+                }
+                if frame is not None
+                else None
+            ),
+        }
+        self.captures.append(entry)
+
+        with self._transcript_path.open("a", encoding="utf-8") as fh:
+            frame_str = (
+                f"frame {frame.idx}/{frame.count} name={frame.name} reason={frame.reason}"
+                if frame is not None
+                else "frame <none>"
+            )
+            ocr_summary = (ocr_str or "").replace("\n", " / ")[:80]
+            fh.write(
+                f"{self._step}. **{label}** — {frame_str} — OCR: `{ocr_summary}`\n"
+            )
+        return entry
+
+
+@pytest.fixture
+def frame_capture(
+    request: pytest.FixtureRequest,
+    camera: camera_mod.CameraBackend,
+    session_seed: str,
+) -> Iterator[FrameCapture]:
+    nodeid = _sanitize_nodeid(request.node.nodeid)
+    dir_path = CAPTURES_ROOT / session_seed / nodeid
+    # Fresh directory per test run so reruns don't mix old and new images.
+    if dir_path.exists():
+        shutil.rmtree(dir_path)
+
+    lines = getattr(request.node, "_debug_log_buffer", [])
+    fc = FrameCapture(camera, dir_path, lines, nodeid)
+    # Stash so pytest_runtest_makereport can embed captures in HTML extras.
+    request.node._ui_captures = fc.captures  # type: ignore[attr-defined]
+    yield fc
+
+
+# ---------- Pre-test home-state reset --------------------------------------
+
+
+def _send_event(port: str, event: InputEventCode) -> None:
+    try:
+        admin_mod.send_input_event(event_code=int(event), port=port)
+    except Exception:  # noqa: BLE001
+        # Treat a failed event as soft — the subsequent frame-log assertion
+        # surfaces the real problem with better context.
+        pass
+
+
+@pytest.fixture(autouse=True)
+def ui_home_state(
+    request: pytest.FixtureRequest,
+    hub_devices: dict[str, Any],
+    _ui_screen_kept_on: None,
+) -> Iterator[None]:
+    """Before every UI test, jump to frame 0 (usually `home`) via FN_F1 and
+    confirm the device emitted the expected frame log.
+
+    Why FN_F1 (not BACK): FN_F1 maps to `switchToFrame(0)` and ALWAYS
+    produces a `reason=fn_f1` log line, regardless of whatever frame the
+    prior test left us on. BACK is context-sensitive (dismisses overlays
+    on some frames, no-op on others) and can silently fail to transition.
+
+    This fixture doubles as the macro-presence detector: if no `fn_f1`
+    log arrives within 5 s, the firmware almost certainly wasn't baked
+    with `USERPREFS_UI_TEST_LOG`. Skip the tier with an actionable hint
+    instead of letting every test body fail with a confusing assertion.
+
+    Autouse scope is restricted to `tests/ui/` by virtue of this fixture
+    living in that directory's conftest.py — no explicit nodeid guard
+    needed (and earlier attempts at one were wrong, matching `/tests/ui/`
+    against a nodeid that has no leading slash).
+    """
+    role = next((r for r in UI_CAPABLE_ROLES if r in hub_devices), None)
+    if role is None:
+        yield
+        return
+
+    hub_entry = hub_devices[role]
+    port = hub_entry.get("port") if isinstance(hub_entry, dict) else hub_entry
+    lines: list[str] = getattr(request.node, "_debug_log_buffer", [])
+    start_len = len(lines)
+
+    # First: a wake event. The screen should already be kept on by
+    # `_ui_screen_kept_on`, but belt + suspenders — if it somehow
+    # powered off (sleep after factory_reset, etc.), this first FN_F1
+    # gets dropped by InputBroker's screenWasOff guard. That's fine;
+    # the second FN_F1 below lands cleanly.
+    _send_event(port, InputEventCode.FN_F1)
+    time.sleep(0.4)
+    _send_event(port, InputEventCode.FN_F1)
+
+    # Wait for the fn_f1 transition log. Any new `reason=fn_f1` line
+    # after call-start counts — we don't care about the name (it should
+    # be `home` or `deviceFocused` depending on board-specific frame order).
+    from ._screen_log import wait_for_reason
+
+    try:
+        wait_for_reason(lines, "fn_f1", timeout_s=5.0)
+    except TimeoutError:
+        # One more try — FreeRTOS queue may be draining slowly.
+        _send_event(port, InputEventCode.FN_F1)
+        try:
+            wait_for_reason(lines, "fn_f1", timeout_s=5.0)
+        except TimeoutError:
+            # Look at what the _debug_log_buffer actually contains to
+            # disambiguate "macro off" from "macro on but event lost".
+            frame_lines = [ln for ln in lines[start_len:] if "Screen: frame" in ln]
+            processing_lines = [
+                ln for ln in lines[start_len:] if "Processing input event" in ln
+            ]
+            if frame_lines:
+                pytest.skip(
+                    f"ui_home_state: events fire but none reach Screen "
+                    f"(saw {len(frame_lines)} frame line(s), "
+                    f"{len(processing_lines)} admin inject(s)). "
+                    f"Device may be in an unusual state — try `--force-bake`."
+                )
+            else:
+                pytest.skip(
+                    "ui_home_state: no `Screen: frame` log after FN_F1. "
+                    "Firmware not baked with USERPREFS_UI_TEST_LOG — "
+                    "run with `--force-bake` to reflash, or verify the "
+                    "macro is active in the bake."
+                )
+    yield
+
+
+# ---------- Small helpers reused by tests ---------------------------------
+
+
+def send_event(
+    port: str, event: InputEventCode | int | str, **kwargs: Any
+) -> dict[str, Any]:
+    """Thin wrapper so tests read `send_event(port, InputEventCode.RIGHT)`."""
+    return admin_mod.send_input_event(event_code=event, port=port, **kwargs)
+
+
+__all__ = [
+    "FrameCapture",
+    "UI_CAPABLE_ROLES",
+    "send_event",
+    "wait_for_frame",
+    "FrameEvent",
+]
+
+
+# Make the helpers discoverable to test modules via `from .conftest import …`.
+# pytest auto-loads conftest.py, but the symbols above are also re-exported
+# for readability in the test files.

mcp-server/tests/ui/test_input_fn_jump.py

@@ -0,0 +1,61 @@
+"""FN_F1..F5 directly jumps to frame 0..4 via Screen::handleInputEvent.
+
+Parametrized over the 5 function keys. Each expects a
+`Screen: frame <idx>/<count> name=... reason=fn_f<k>` log line, with
+`idx == k-1`. We don't hardcode the frame *name* because the layout
+depends on which modules are compiled in for this board.
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import get_current_frame, wait_for_reason
+from .conftest import FrameCapture, send_event
+
+
+@pytest.mark.timeout(120)
+@pytest.mark.parametrize(
+    "event,expected_idx,reason",
+    [
+        (InputEventCode.FN_F1, 0, "fn_f1"),
+        (InputEventCode.FN_F2, 1, "fn_f2"),
+        (InputEventCode.FN_F3, 2, "fn_f3"),
+        (InputEventCode.FN_F4, 3, "fn_f4"),
+        (InputEventCode.FN_F5, 4, "fn_f5"),
+    ],
+    ids=["FN_F1", "FN_F2", "FN_F3", "FN_F4", "FN_F5"],
+)
+def test_fn_jump_direct_frame(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+    event: InputEventCode,
+    expected_idx: int,
+    reason: str,
+) -> None:
+    lines: list[str] = request.node._debug_log_buffer
+    start = get_current_frame(lines)
+    assert start is not None, "no frame log yet — USERPREFS_UI_TEST_LOG not wired?"
+    assert start.name in (
+        "home",
+        "deviceFocused",
+    ), f"setup expected frame 0 landing, got {start.name!r}"
+    frame_capture("initial")
+
+    if start.count <= expected_idx:
+        pytest.skip(
+            f"device has {start.count} frames; FN_F{expected_idx + 1} needs > {expected_idx}"
+        )
+
+    send_event(ui_port, event)
+    time.sleep(0.1)
+    evt = wait_for_reason(lines, reason, timeout_s=5.0)
+    assert evt.idx == expected_idx, (
+        f"FN_F{expected_idx + 1} expected idx={expected_idx}, got {evt.idx} "
+        f"(name={evt.name}, count={evt.count})"
+    )
+    frame_capture(f"after-{reason}")

mcp-server/tests/ui/test_input_fn_oob.py

@@ -0,0 +1,61 @@
+"""Out-of-bounds FN_F5 when the device has <5 frames: no crash, idx unchanged.
+
+`Screen::handleInputEvent` dispatches FN_F5 unconditionally to
+`ui->switchToFrame(4)`. The OLEDDisplayUi library typically clamps or
+silently ignores out-of-range indices, but firmware bugs have existed
+here — this test protects against a regression that would wedge the UI.
+
+If this test fails, first check: did the device actually crash (Guru
+Meditation in the log)? Or did switchToFrame accept an OOB index and
+leave the UI blank?
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import get_current_frame, wait_for_reason
+from .conftest import FrameCapture, send_event
+
+
+@pytest.mark.timeout(90)
+def test_fn_f5_out_of_bounds(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+) -> None:
+    lines: list[str] = request.node._debug_log_buffer
+    start = get_current_frame(lines)
+    assert start is not None
+
+    if start.count > 5:
+        pytest.skip(
+            f"device has {start.count} frames; FN_F5 is in-bounds — not testing OOB here"
+        )
+
+    frame_capture("initial-home")
+    send_event(ui_port, InputEventCode.FN_F5)
+    time.sleep(0.5)
+
+    try:
+        wait_for_reason(lines, "fn_f5", timeout_s=3.0)
+    except TimeoutError:
+        # Firmware may have ignored the event entirely — acceptable.
+        pass
+
+    # Capture whatever is on screen (OCR will tell us if something weird
+    # happened). Device must remain responsive — subsequent events should
+    # still land.
+    frame_capture("after-fn_f5-oob")
+
+    # Send a RIGHT to confirm the UI is still alive. If this times out,
+    # the OOB switchToFrame wedged the UI.
+    send_event(ui_port, InputEventCode.RIGHT)
+    post = wait_for_reason(lines, "next", timeout_s=5.0)
+    assert (
+        post is not None
+    ), "UI wedged after OOB FN_F5 — RIGHT no longer produces frame log"
+    frame_capture("after-recovery-right")

mcp-server/tests/ui/test_input_menu.py

@@ -0,0 +1,68 @@
+"""SELECT on the home frame opens the home menu; BACK closes it.
+
+The home menu is an overlay (menuHandler::homeBaseMenu), not a frame
+transition — so we verify via OCR difference between before/after
+captures rather than a `Screen: frame` log line. The underlying
+mechanism is still InputBroker → Screen::handleInputEvent → menu
+callback.
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import get_current_frame
+from .conftest import FrameCapture, send_event
+
+
+@pytest.mark.timeout(120)
+def test_select_opens_home_menu(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+) -> None:
+    lines: list[str] = request.node._debug_log_buffer
+    start = get_current_frame(lines)
+    assert start is not None
+    if start.name not in ("home", "deviceFocused"):
+        pytest.skip(
+            f"SELECT on {start.name!r} doesn't open homeBaseMenu; "
+            "test is only valid when the landing frame is home/deviceFocused"
+        )
+
+    initial = frame_capture("initial")
+    send_event(ui_port, InputEventCode.SELECT)
+    time.sleep(0.8)
+    opened = frame_capture("after-select")
+
+    # The menu is an overlay (not a frame change). We cannot use log
+    # assertion — instead, OCR should differ because a menu list is now
+    # drawn on top.
+    initial_text = (initial.get("ocr_text") or "").strip()
+    opened_text = (opened.get("ocr_text") or "").strip()
+    if initial_text and opened_text:
+        # When OCR is available, require *some* difference between the two
+        # frames — even a single menu title changes the transcribed text.
+        assert initial_text != opened_text, (
+            f"expected OCR diff after SELECT; both read {initial_text!r}. "
+            "If both are empty, check camera alignment + OCR backend."
+        )
+
+    # Back out — the menu dismisses on BACK.
+    send_event(ui_port, InputEventCode.BACK)
+    time.sleep(0.8)
+    closed = frame_capture("after-back")
+
+    # Soft check: OCR after BACK should look different from the menu
+    # (either back to home or onto a previous frame — BACK's exact
+    # behavior when the menu is up vs. not-up varies). We don't assert
+    # equality because OLED rendering is pixel-stable but camera sampling
+    # introduces noise.
+    if opened_text and closed.get("ocr_text"):
+        close_text = (closed.get("ocr_text") or "").strip()
+        assert (
+            close_text != opened_text
+        ), f"after BACK, OCR still looks like the menu: {close_text!r}"

mcp-server/tests/ui/test_input_message_scroll.py

@@ -0,0 +1,60 @@
+"""Once we navigate to the textMessage frame, UP/DOWN exercises the
+message-scroll path (or opens CannedMessages on empty devices).
+
+Weaker than a "no frame change" assertion because on a fresh bench
+device the message store is usually empty, and the firmware's UP
+handler in that case launches CannedMessage — which DOES rebuild
+frames. We just verify the path doesn't crash + produce captures for
+visual inspection.
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import get_current_frame, wait_for_frame
+from .conftest import FrameCapture, send_event
+
+
+@pytest.mark.timeout(180)
+def test_up_down_on_textmessage_survives(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+) -> None:
+    lines: list[str] = request.node._debug_log_buffer
+    frame_capture("initial")
+
+    # Walk RIGHT until we land on textMessage — up to 15 hops.
+    for _i in range(15):
+        send_event(ui_port, InputEventCode.RIGHT)
+        time.sleep(0.3)
+        current = get_current_frame(lines)
+        if current is not None and current.name == "textMessage":
+            break
+    else:
+        pytest.skip(
+            "couldn't reach textMessage frame within 15 RIGHTs — not present on this board"
+        )
+
+    wait_for_frame(lines, "textMessage", timeout_s=5.0)
+    frame_capture("on-textMessage")
+
+    # UP and DOWN exercise the message-scroll / canned-message-launch path.
+    # Capture after each so the HTML report shows any visual effect.
+    send_event(ui_port, InputEventCode.UP)
+    time.sleep(0.3)
+    frame_capture("after-up")
+
+    send_event(ui_port, InputEventCode.DOWN)
+    time.sleep(0.3)
+    frame_capture("after-down")
+
+    # Soft check: we should still be in a reachable frame (not wedged).
+    # The next test's `ui_home_state` will error out if the device is
+    # unresponsive, so we don't need a stricter guarantee here.
+    final = get_current_frame(lines)
+    assert final is not None, "no frame log after UP/DOWN — event path broke"

mcp-server/tests/ui/test_input_navigation.py

@@ -0,0 +1,93 @@
+"""INPUT_BROKER_RIGHT cycles forward through frames; INPUT_BROKER_LEFT backs.
+
+The simplest UI test: fire N RIGHT events and assert the frame index
+moves forward by N (modulo frameCount). Each step captures an image +
+OCR for the HTML report.
+"""
+
+from __future__ import annotations
+
+import time
+from typing import Any
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import get_current_frame, wait_for_frame
+from .conftest import FrameCapture, send_event
+
+
+@pytest.mark.timeout(120)
+def test_input_right_cycles_frames(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+) -> None:
+    lines: list[str] = request.node._debug_log_buffer
+    start = get_current_frame(lines)
+    assert start is not None, "no frame log yet — USERPREFS_UI_TEST_LOG not wired?"
+    # FN_F1 in ui_home_state lands on frame 0. The name at frame 0 varies
+    # by board (home on heltec-v3, deviceFocused on others) — accept either.
+    assert start.name in (
+        "home",
+        "deviceFocused",
+    ), f"setup expected home/deviceFocused at frame 0, got {start.name!r}"
+
+    frame_capture("initial")
+    visited = [start.idx]
+
+    for step in range(4):
+        send_event(ui_port, InputEventCode.RIGHT)
+        # Each RIGHT should bump the frame index by 1. The log fires with
+        # `reason=next` from showFrame(NEXT).
+        before_count = len(list(_frame_events(lines)))
+        deadline = time.monotonic() + 5.0
+        while time.monotonic() < deadline:
+            if len(list(_frame_events(lines))) > before_count:
+                break
+            time.sleep(0.1)
+        evt = get_current_frame(lines)
+        assert evt is not None
+        assert (
+            evt.reason == "next"
+        ), f"step {step}: expected reason=next, got {evt.reason!r}"
+        visited.append(evt.idx)
+        frame_capture(f"after-right-{step + 1}")
+
+    # Sanity: each index should differ from its predecessor.
+    diffs = [visited[i + 1] - visited[i] for i in range(len(visited) - 1)]
+    assert all(
+        d in (1, -(start.count - 1)) for d in diffs
+    ), f"expected monotonic +1 steps (or a wrap), got visited={visited} diffs={diffs}"
+
+
+@pytest.mark.timeout(120)
+def test_input_left_returns_to_home(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+) -> None:
+    """After RIGHT×3 + LEFT×3, we should end up back on the starting frame."""
+    lines: list[str] = request.node._debug_log_buffer
+    start = get_current_frame(lines)
+    assert start is not None
+    start_name = start.name
+    frame_capture("initial")
+    for _ in range(3):
+        send_event(ui_port, InputEventCode.RIGHT)
+        time.sleep(0.3)
+    frame_capture("after-right-3")
+
+    for _ in range(3):
+        send_event(ui_port, InputEventCode.LEFT)
+        time.sleep(0.3)
+
+    # Back to whichever frame we started on (home or deviceFocused).
+    wait_for_frame(lines, start_name, timeout_s=5.0)
+    frame_capture(f"after-left-3-back-{start_name}")
+
+
+def _frame_events(lines: list[str]) -> Any:
+    from ._screen_log import iter_frame_events
+
+    return iter_frame_events(lines)

mcp-server/tests/ui/test_input_node_scroll.py

@@ -0,0 +1,51 @@
+"""On the nodelist_nodes frame, UP/DOWN scrolls the list via
+`NodeListRenderer::scrollUp/scrollDown` (src/graphics/Screen.cpp:1779-1788).
+The firmware returns 0 before notifying observers, so no frame-change
+log fires. Verify the path doesn't crash and we stay on nodelist_nodes.
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import assert_no_frame_change, get_current_frame, wait_for_frame
+from .conftest import FrameCapture, send_event
+
+
+@pytest.mark.timeout(180)
+def test_up_down_on_nodelist_no_frame_change(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+) -> None:
+    lines: list[str] = request.node._debug_log_buffer
+    frame_capture("initial")
+
+    # Walk RIGHT until we land on nodelist_nodes.
+    for _i in range(15):
+        send_event(ui_port, InputEventCode.RIGHT)
+        time.sleep(0.3)
+        current = get_current_frame(lines)
+        if current is not None and current.name == "nodelist_nodes":
+            break
+    else:
+        pytest.skip("couldn't reach nodelist_nodes within 15 RIGHTs")
+
+    wait_for_frame(lines, "nodelist_nodes", timeout_s=5.0)
+    frame_capture("on-nodelist")
+
+    # UP/DOWN on nodelist scroll internally + `return 0` before
+    # notifyObservers — no frame-change log. Verify.
+    send_event(ui_port, InputEventCode.UP)
+    assert_no_frame_change(lines, wait_s=1.5)
+    send_event(ui_port, InputEventCode.DOWN)
+    assert_no_frame_change(lines, wait_s=1.5)
+
+    final = get_current_frame(lines)
+    assert (
+        final is not None and final.name == "nodelist_nodes"
+    ), f"UP/DOWN moved us off nodelist_nodes; now on {final!r}"
+    frame_capture("after-up-down")

mcp-server/tests/unit/test_input_event_codes.py

@@ -0,0 +1,90 @@
+"""Pin `InputEventCode` values to the firmware `input_broker_event` enum.
+
+If this test fails, someone changed the firmware enum (or this Python
+mirror) and they must stay in sync — the admin RPC sends these as u8
+wire values directly.
+
+Also exercises `coerce_event_code` for the happy + error paths.
+"""
+
+from __future__ import annotations
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode, coerce_event_code
+
+
+class TestInputEventCodeValues:
+    """These values MUST match src/input/InputBroker.h exactly."""
+
+    def test_navigation_keys(self) -> None:
+        assert int(InputEventCode.UP) == 17
+        assert int(InputEventCode.DOWN) == 18
+        assert int(InputEventCode.LEFT) == 19
+        assert int(InputEventCode.RIGHT) == 20
+
+    def test_action_keys(self) -> None:
+        assert int(InputEventCode.SELECT) == 10
+        assert int(InputEventCode.CANCEL) == 24
+        assert int(InputEventCode.BACK) == 27
+
+    def test_long_press_variants(self) -> None:
+        assert int(InputEventCode.SELECT_LONG) == 11
+        assert int(InputEventCode.UP_LONG) == 12
+        assert int(InputEventCode.DOWN_LONG) == 13
+
+    def test_fn_keys(self) -> None:
+        assert int(InputEventCode.FN_F1) == 0xF1
+        assert int(InputEventCode.FN_F2) == 0xF2
+        assert int(InputEventCode.FN_F3) == 0xF3
+        assert int(InputEventCode.FN_F4) == 0xF4
+        assert int(InputEventCode.FN_F5) == 0xF5
+
+    def test_system_events(self) -> None:
+        assert int(InputEventCode.SHUTDOWN) == 0x9B
+        assert int(InputEventCode.GPS_TOGGLE) == 0x9E
+        assert int(InputEventCode.SEND_PING) == 0xAF
+
+    def test_auto_increment_block(self) -> None:
+        # C enum: `BACK = 27, USER_PRESS, ALT_PRESS, ALT_LONG` → 28, 29, 30.
+        assert int(InputEventCode.USER_PRESS) == 28
+        assert int(InputEventCode.ALT_PRESS) == 29
+        assert int(InputEventCode.ALT_LONG) == 30
+
+
+class TestCoerceEventCode:
+    def test_int_passthrough(self) -> None:
+        assert coerce_event_code(20) == 20
+        assert coerce_event_code(0) == 0
+        assert coerce_event_code(255) == 255
+
+    def test_enum_passthrough(self) -> None:
+        assert coerce_event_code(InputEventCode.RIGHT) == 20
+        assert coerce_event_code(InputEventCode.FN_F1) == 0xF1
+
+    def test_name_case_insensitive(self) -> None:
+        assert coerce_event_code("right") == 20
+        assert coerce_event_code("RIGHT") == 20
+        assert coerce_event_code("Right") == 20
+
+    def test_input_broker_prefix_stripped(self) -> None:
+        assert coerce_event_code("INPUT_BROKER_FN_F1") == 0xF1
+        assert coerce_event_code("input_broker_select") == 10
+
+    def test_hyphen_and_underscore_equivalence(self) -> None:
+        assert coerce_event_code("fn-f1") == 0xF1
+
+    def test_int_out_of_range_raises(self) -> None:
+        with pytest.raises(ValueError, match="u8"):
+            coerce_event_code(256)
+        with pytest.raises(ValueError, match="u8"):
+            coerce_event_code(-1)
+
+    def test_unknown_name_raises(self) -> None:
+        with pytest.raises(ValueError, match="unknown event code name"):
+            coerce_event_code("NOT_A_KEY")
+
+    def test_wrong_type_raises(self) -> None:
+        with pytest.raises(TypeError):
+            coerce_event_code(1.5)  # type: ignore[arg-type]
+        with pytest.raises(TypeError):
+            coerce_event_code(None)  # type: ignore[arg-type]

mcp-server/tests/unit/test_uhubctl_parser.py

@@ -0,0 +1,148 @@
+"""Pin the `uhubctl` default-output parser against canned real-world samples.
+
+uhubctl's output format has been stable since v2.x but occasionally adds
+new hub-descriptor fields (e.g. the `, ppps` marker). The parser uses loose
+regexes to tolerate additions; this test keeps us honest.
+
+Samples captured from:
+- v2.6.0 on macOS (Homebrew) — two USB2 hubs, one populated with an
+  nRF52 and a CP2102, plus chained USB3 hubs.
+- v2.5.0 on Linux (hypothetical — reconstructed from the project README).
+"""
+
+from __future__ import annotations
+
+import pytest
+from meshtastic_mcp.uhubctl import (
+    ROLE_VIDS,
+    UhubctlError,
+    parse_list_output,
+)
+
+# Actual `uhubctl` stdout on the developer's macOS bench, Apr 2026.
+_SAMPLE_MACOS_V26 = """\
+Current status for hub 1-1.3 [2109:2817 VIA Labs, Inc. USB2.0 Hub, USB 2.10, 4 ports, ppps]
+  Port 1: 0100 power
+  Port 2: 0103 power enable connect [239a:8029 RAKwireless WisCore RAK4631 Board 920456B1E6972262]
+  Port 3: 0103 power enable connect [10c4:ea60 Silicon Labs CP2102 USB to UART Bridge Controller 0001]
+  Port 4: 0100 power
+Current status for hub 1-2.3 [2109:0817 VIA Labs, Inc. USB3.0 Hub, USB 3.10, 4 ports, ppps]
+  Port 1: 02a0 power 5gbps Rx.Detect
+  Port 2: 02a0 power 5gbps Rx.Detect
+  Port 3: 02a0 power 5gbps Rx.Detect
+  Port 4: 02a0 power 5gbps Rx.Detect
+Current status for hub 1-1 [2109:2817 VIA Labs, Inc. USB2.0 Hub, USB 2.10, 4 ports, ppps]
+  Port 1: 0100 power
+  Port 2: 0100 power
+  Port 3: 0503 power highspeed enable connect [2109:2817 VIA Labs, Inc. USB2.0 Hub, USB 2.10, 4 ports, ppps]
+  Port 4: 0100 power
+"""
+
+
+# Minimal Linux-style sample (fewer hubs, shows a non-PPPS hub).
+_SAMPLE_LINUX_NONPPPS = """\
+Current status for hub 2-1.4 [05e3:0608 GenesysLogic USB2.1 Hub, USB 2.10, 4 ports]
+  Port 1: 0507 power highspeed suspend enable connect [239a:0029 Adafruit Feather Bootloader]
+  Port 2: 0100 power
+  Port 3: 0100 power
+  Port 4: 0100 power
+"""
+
+
+class TestParseListOutput:
+    def test_parses_macos_sample_hub_count(self) -> None:
+        hubs = parse_list_output(_SAMPLE_MACOS_V26)
+        assert len(hubs) == 3
+
+    def test_parses_hub_location_and_vid(self) -> None:
+        hubs = parse_list_output(_SAMPLE_MACOS_V26)
+        via_hub = hubs[0]
+        assert via_hub["location"] == "1-1.3"
+        assert via_hub["vid"] == 0x2109
+        assert via_hub["pid"] == 0x2817
+        assert via_hub["ppps"] is True
+
+    def test_parses_port_with_device(self) -> None:
+        hubs = parse_list_output(_SAMPLE_MACOS_V26)
+        nrf52_hub = hubs[0]
+        port2 = next(p for p in nrf52_hub["ports"] if p["port"] == 2)
+        assert port2["device_vid"] == 0x239A
+        assert port2["device_pid"] == 0x8029
+        assert "RAKwireless" in port2["device_desc"]
+
+    def test_empty_port_has_no_device(self) -> None:
+        hubs = parse_list_output(_SAMPLE_MACOS_V26)
+        nrf52_hub = hubs[0]
+        port1 = next(p for p in nrf52_hub["ports"] if p["port"] == 1)
+        assert port1["device_vid"] is None
+        assert port1["device_pid"] is None
+        assert port1["device_desc"] is None
+
+    def test_ports_count(self) -> None:
+        hubs = parse_list_output(_SAMPLE_MACOS_V26)
+        for hub in hubs:
+            assert len(hub["ports"]) == 4  # each sample hub has 4 ports
+
+    def test_non_ppps_hub_flagged(self) -> None:
+        hubs = parse_list_output(_SAMPLE_LINUX_NONPPPS)
+        assert len(hubs) == 1
+        assert hubs[0]["ppps"] is False
+
+    def test_handles_empty_input(self) -> None:
+        assert parse_list_output("") == []
+
+    def test_handles_malformed_lines_gracefully(self) -> None:
+        # Lines that don't match HUB_RE or PORT_RE are ignored silently.
+        garbage = "uhubctl: warning: something weird\n" + _SAMPLE_LINUX_NONPPPS
+        hubs = parse_list_output(garbage)
+        assert len(hubs) == 1
+
+
+class TestRoleVids:
+    def test_nrf52_mapped(self) -> None:
+        assert 0x239A in ROLE_VIDS["nrf52"]
+
+    def test_esp32s3_covers_both_vids(self) -> None:
+        # Espressif native USB + CP2102 USB-UART on heltec-v3 boards.
+        assert 0x303A in ROLE_VIDS["esp32s3"]
+        assert 0x10C4 in ROLE_VIDS["esp32s3"]
+
+
+class TestResolveTargetErrorPaths:
+    def test_unknown_role_raises(self, monkeypatch: pytest.MonkeyPatch) -> None:
+        from meshtastic_mcp.uhubctl import resolve_target
+
+        # Clear any env-var pinning that might make this pass accidentally.
+        for key in (
+            "MESHTASTIC_UHUBCTL_LOCATION_FLUX",
+            "MESHTASTIC_UHUBCTL_PORT_FLUX",
+        ):
+            monkeypatch.delenv(key, raising=False)
+        with pytest.raises(UhubctlError, match="unknown role"):
+            resolve_target("flux")
+
+    def test_invalid_env_port_raises(self, monkeypatch: pytest.MonkeyPatch) -> None:
+        from meshtastic_mcp.uhubctl import resolve_target
+
+        monkeypatch.setenv("MESHTASTIC_UHUBCTL_LOCATION_NRF52", "1-1.3")
+        monkeypatch.setenv("MESHTASTIC_UHUBCTL_PORT_NRF52", "not-an-int")
+        with pytest.raises(UhubctlError, match="not a valid integer"):
+            resolve_target("nrf52")
+
+    def test_env_var_pinning_wins(self, monkeypatch: pytest.MonkeyPatch) -> None:
+        from meshtastic_mcp.uhubctl import resolve_target
+
+        # Env-var pinning should NOT require uhubctl to be running / installed.
+        monkeypatch.setenv("MESHTASTIC_UHUBCTL_LOCATION_NRF52", "9-9.9")
+        monkeypatch.setenv("MESHTASTIC_UHUBCTL_PORT_NRF52", "7")
+        assert resolve_target("nrf52") == ("9-9.9", 7)
+
+    def test_normalize_role_strips_alt_suffix(
+        self, monkeypatch: pytest.MonkeyPatch
+    ) -> None:
+        from meshtastic_mcp.uhubctl import resolve_target
+
+        # esp32s3_alt collapses to esp32s3 for env-var lookup.
+        monkeypatch.setenv("MESHTASTIC_UHUBCTL_LOCATION_ESP32S3", "2-2")
+        monkeypatch.setenv("MESHTASTIC_UHUBCTL_PORT_ESP32S3", "3")
+        assert resolve_target("esp32s3_alt") == ("2-2", 3)

mcp-server/tests/unit/test_ui_screen_log.py

@@ -0,0 +1,80 @@
+"""Pin the `Screen: frame N/M name=X reason=Y` regex + FrameEvent dataclass.
+
+The firmware-side format lives in `src/graphics/Screen.cpp::logFrameChange`;
+if the format string changes, this test — and the parser in
+`tests/ui/_screen_log.py` — have to be updated together.
+"""
+
+from __future__ import annotations
+
+from tests.ui._screen_log import FRAME_RE, FrameEvent, iter_frame_events
+
+
+class TestFrameEventParse:
+    def test_exact_firmware_output(self) -> None:
+        raw = "Screen: frame 2/8 name=home reason=next"
+        evt = FrameEvent.parse(raw)
+        assert evt is not None
+        assert evt.idx == 2
+        assert evt.count == 8
+        assert evt.name == "home"
+        assert evt.reason == "next"
+        assert evt.raw == raw
+
+    def test_with_log_prefix(self) -> None:
+        """Log lines may be preamble-wrapped by the firmware LOG_INFO macro
+        (timestamp, severity, etc.) — the regex uses .search() not .match()
+        so prefixes are fine."""
+        raw = "[INFO] 00:12:34  567   Screen: frame 4/12 name=nodelist_nodes reason=fn_f3    "
+        evt = FrameEvent.parse(raw)
+        assert evt is not None
+        assert evt.idx == 4
+        assert evt.count == 12
+        assert evt.name == "nodelist_nodes"
+        assert evt.reason == "fn_f3"
+
+    def test_rebuild_reason(self) -> None:
+        evt = FrameEvent.parse("Screen: frame 0/5 name=deviceFocused reason=rebuild")
+        assert evt is not None
+        assert evt.reason == "rebuild"
+
+    def test_all_fn_reasons(self) -> None:
+        for k in range(1, 6):
+            evt = FrameEvent.parse(
+                f"Screen: frame {k - 1}/8 name=settings reason=fn_f{k}"
+            )
+            assert evt is not None and evt.reason == f"fn_f{k}"
+
+    def test_unknown_name_is_preserved(self) -> None:
+        """If the reverse-map returns 'unknown', that still parses cleanly."""
+        evt = FrameEvent.parse("Screen: frame 99/100 name=unknown reason=prev")
+        assert evt is not None and evt.name == "unknown"
+
+    def test_non_matching_line_returns_none(self) -> None:
+        assert FrameEvent.parse("BOOT Booting firmware 2.7.23") is None
+        assert FrameEvent.parse("") is None
+        assert FrameEvent.parse("Screen: without the right format") is None
+
+
+class TestIterFrameEvents:
+    def test_filters_non_matching_lines(self) -> None:
+        lines = [
+            "Booting...",
+            "Screen: frame 1/5 name=home reason=rebuild",
+            "Some other log line",
+            "Screen: frame 2/5 name=textMessage reason=next",
+        ]
+        evts = list(iter_frame_events(lines))
+        assert len(evts) == 2
+        assert evts[0].reason == "rebuild"
+        assert evts[1].reason == "next"
+
+
+class TestRegexAnchoring:
+    def test_regex_is_compiled(self) -> None:
+        assert FRAME_RE.search("Screen: frame 0/0 name=home reason=next") is not None
+
+    def test_regex_allows_unusual_names(self) -> None:
+        r"""Name is `\S+`, so compound names with underscores/digits match."""
+        m = FRAME_RE.search("Screen: frame 5/10 name=nodelist_hopsignal reason=fn_f2")
+        assert m is not None and m["name"] == "nodelist_hopsignal"

platformio.ini

@@ -124,7 +124,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/5305670b68eb5b92d14e62b5b536969ca4bb441f.zip
+	https://github.com/meshtastic/device-ui/archive/56e1da4e7d30abcd746a2092a30e422f8cf5fc2b.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]

src/Power.cpp

@@ -746,37 +746,17 @@ bool Power::setup()
         found = true;
 #endif
     }
-#ifdef EXT_PWR_DETECT
-    attachInterrupt(
-        EXT_PWR_DETECT,
-        []() {
-            power->setIntervalFromNow(0);
-            runASAP = true;
-        },
-        CHANGE);
-#endif
-#ifdef BATTERY_CHARGING_INV
-    attachInterrupt(
-        BATTERY_CHARGING_INV,
-        []() {
-            power->setIntervalFromNow(0);
-            runASAP = true;
-        },
-        CHANGE);
-#endif
-#ifdef EXT_CHRG_DETECT
-    attachInterrupt(
-        EXT_CHRG_DETECT,
-        []() {
-            power->setIntervalFromNow(0);
-            runASAP = true;
-            BaseType_t higherWake = 0;
-        },
-        CHANGE);
-#endif
+    attachPowerInterrupts();
     enabled = found;
     low_voltage_counter = 0;
 
+#ifdef ARCH_ESP32
+    // Register callbacks for before and after lightsleep
+    // Used to detach and reattach interrupts
+    lsObserver.observe(&notifyLightSleep);
+    lsEndObserver.observe(&notifyLightSleepEnd);
+#endif
+
     return found;
 }
 
@@ -1055,6 +1035,97 @@ int32_t Power::runOnce()
     return (statusHandler && statusHandler->isInitialized()) ? (1000 * 20) : RUN_SAME;
 }
 
+#ifdef ARCH_ESP32
+
+// Detach our class' interrupts before lightsleep
+// Allows sleep.cpp to configure its own interrupts, which wake the device on user-button press
+int Power::beforeLightSleep(void *unused)
+{
+    LOG_WARN("Detaching power interrupts for sleep");
+    detachPowerInterrupts();
+    return 0; // Indicates success
+}
+
+// Reconfigure our interrupts
+// Our class' interrupts were disconnected during sleep, to allow the user button to wake the device from sleep
+int Power::afterLightSleep(esp_sleep_wakeup_cause_t cause)
+{
+    attachPowerInterrupts();
+    return 0; // Indicates success
+}
+
+#endif
+
+/*
+ * Attach (or re-attach) hardware interrupts for power management
+ * Public method. Used outside class when waking from MCU sleep
+ */
+void Power::attachPowerInterrupts()
+{
+#ifdef EXT_PWR_DETECT
+    attachInterrupt(
+        EXT_PWR_DETECT,
+        []() {
+            power->setIntervalFromNow(0);
+            runASAP = true;
+        },
+        CHANGE);
+#endif
+#ifdef BATTERY_CHARGING_INV
+    attachInterrupt(
+        BATTERY_CHARGING_INV,
+        []() {
+            power->setIntervalFromNow(0);
+            runASAP = true;
+        },
+        CHANGE);
+#endif
+#ifdef EXT_CHRG_DETECT
+    attachInterrupt(
+        EXT_CHRG_DETECT,
+        []() {
+            power->setIntervalFromNow(0);
+            runASAP = true;
+            BaseType_t higherWake = 0;
+        },
+        CHANGE);
+#endif
+#ifdef PMU_IRQ
+    if (PMU) {
+        attachInterrupt(
+            PMU_IRQ,
+            [] {
+                pmu_irq = true;
+                power->setIntervalFromNow(0);
+                runASAP = true;
+            },
+            FALLING);
+    }
+#endif
+}
+
+/*
+ * Detach the "normal" button interrupts.
+ * Public method. Used before attaching a "wake-on-button" interrupt for MCU sleep
+ */
+void Power::detachPowerInterrupts()
+{
+#ifdef EXT_PWR_DETECT
+    detachInterrupt(EXT_PWR_DETECT);
+#endif
+#ifdef BATTERY_CHARGING_INV
+    detachInterrupt(BATTERY_CHARGING_INV);
+#endif
+#ifdef EXT_CHRG_DETECT
+    detachInterrupt(EXT_CHRG_DETECT);
+#endif
+#ifdef PMU_IRQ
+    if (PMU) {
+        detachInterrupt(PMU_IRQ);
+    }
+#endif
+}
+
 /**
  * Init the power manager chip
  *
@@ -1332,8 +1403,6 @@ bool Power::axpChipInit()
     }
 
     pinMode(PMU_IRQ, INPUT);
-    attachInterrupt(
-        PMU_IRQ, [] { pmu_irq = true; }, FALLING);
 
     // we do not look for AXPXXX_CHARGING_FINISHED_IRQ & AXPXXX_CHARGING_IRQ
     // because it occurs repeatedly while there is no battery also it could cause

src/detect/ScanI2C.h

@@ -31,6 +31,10 @@ class ScanI2C
         INA3221,
         MAX17048,
         MCP9808,
+        SHT31,
+        SHT4X,
+        SHTC3,
+        SHTXX,
         LPS22HB,
         QMC6310U,
         QMC6310N,
@@ -86,13 +90,13 @@ class ScanI2C
         DA217,
         CHSC6X,
         CST226SE,
+        CST3530,
         BMI270,
         SEN5X,
         SFA30,
         CW2015,
         SCD30,
         ADS1115,
-        SHTXX
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -629,7 +629,31 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(PCT2075_ADDR, PCT2075, "PCT2075", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(SCD30_ADDR, SCD30, "SCD30", (uint8_t)addr.address);
             case CST328_ADDR:
-                // Do we have the CST328 or the CST226SE
+                // Do we have the CST328 or the CST226SE,CST3530
+                {
+                    // T-Deck pro V1.1 new touch panel use CST3530
+                    int retry = 5;
+                    while (retry--) {
+                        uint8_t buffer[7];
+                        uint8_t r_cmd[] = {0x0d0, 0x03, 0x00, 0x00};
+                        i2cBus->beginTransmission(addr.address);
+                        i2cBus->write(r_cmd, sizeof(r_cmd));
+                        if (i2cBus->endTransmission() == 0) {
+                            i2cBus->requestFrom((int)addr.address, 7);
+                            i2cBus->readBytes(buffer, 7);
+                            if (buffer[2] == 0xCA && buffer[3] == 0xCA) {
+                                logFoundDevice("CST3530", (uint8_t)addr.address);
+                                type = CST3530;
+                                break;
+                            }
+                        }
+                        uint8_t cmd1[] = {0xD0, 0x00, 0x04, 0x00};
+                        i2cBus->beginTransmission(addr.address);
+                        i2cBus->write(cmd1, sizeof(cmd1));
+                        i2cBus->endTransmission();
+                        delay(50);
+                    }
+                }
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xAB), 1);
                 if (registerValue == 0xA9) {
                     type = CST226SE;

src/graphics/EInkDisplay2.cpp

@@ -104,8 +104,13 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
 // End the update process - virtual method, overridden in derived class
 void EInkDisplay::endUpdate()
 {
-    // Power off display hardware, then deep-sleep (Except Wireless Paper V1.1, no deep-sleep)
+#ifndef EINK_NOT_HIBERNATE
+    // By default, power off the E-Ink display hardware and enter hibernate().
+    // Boards/panels that define EINK_NOT_HIBERNATE intentionally skip this step.
+    // Skipping hibernate() can help avoid panel-specific wake/refresh or ghosting issues,
+    // but it typically trades lower power savings for that compatibility.
     adafruitDisplay->hibernate();
+#endif
 }
 
 // Write the buffer to the display memory

src/graphics/Screen.cpp

@@ -276,6 +276,42 @@ void Screen::showNumberPicker(const char *message, uint32_t durationMs, uint8_t
     ui->update();
 }
 
+void Screen::showSignedDecimalPicker(const char *message, uint32_t durationMs, int initialValueTenths, int minValueTenths,
+                                     int maxValueTenths, std::function<void(int)> bannerCallback)
+{
+#ifdef USE_EINK
+    EINK_ADD_FRAMEFLAG(dispdev, DEMAND_FAST); // Skip full refresh for all overlay menus
+#endif
+    if (minValueTenths > maxValueTenths) {
+        int temp = minValueTenths;
+        minValueTenths = maxValueTenths;
+        maxValueTenths = temp;
+    }
+
+    if (initialValueTenths < minValueTenths) {
+        initialValueTenths = minValueTenths;
+    } else if (initialValueTenths > maxValueTenths) {
+        initialValueTenths = maxValueTenths;
+    }
+
+    strncpy(NotificationRenderer::alertBannerMessage, message, 255);
+    NotificationRenderer::alertBannerMessage[255] = '\0'; // Ensure null termination
+    NotificationRenderer::alertBannerUntil = (durationMs == 0) ? 0 : millis() + durationMs;
+    NotificationRenderer::alertBannerCallback = bannerCallback;
+    NotificationRenderer::pauseBanner = false;
+    NotificationRenderer::curSelected = 0;
+    NotificationRenderer::current_notification_type = notificationTypeEnum::signed_decimal_picker;
+    NotificationRenderer::signedDecimalValueTenths = static_cast<int16_t>(initialValueTenths);
+    NotificationRenderer::signedDecimalMinTenths = static_cast<int16_t>(minValueTenths);
+    NotificationRenderer::signedDecimalMaxTenths = static_cast<int16_t>(maxValueTenths);
+    NotificationRenderer::signedDecimalIsNegative = (initialValueTenths < 0);
+
+    static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
+    ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
+    ui->setTargetFPS(60);
+    ui->update();
+}
+
 void Screen::showTextInput(const char *header, const char *initialText, uint32_t durationMs,
                            std::function<void(const std::string &)> textCallback)
 {
@@ -1269,6 +1305,8 @@ void Screen::setFrames(FrameFocus focus)
                 fsi.positions.focusedModule = numframes;
             if (m && m == waypointModule)
                 fsi.positions.waypoint = numframes;
+            if (m && strcmp(m->getName(), "EnvironmentTelemetry") == 0)
+                fsi.positions.environment = numframes;
 
             indicatorIcons.push_back(icon_module);
             numframes++;
@@ -1357,6 +1395,10 @@ void Screen::setFrames(FrameFocus focus)
     // Store the info about this frameset, for future setFrames calls
     this->framesetInfo = fsi;
 
+#ifdef USERPREFS_UI_TEST_LOG
+    logFrameChange("rebuild", ui->getUiState()->currentFrame);
+#endif
+
     setFastFramerate(); // Draw ASAP
 }
 
@@ -1511,11 +1553,77 @@ void Screen::handleOnPress()
     }
 }
 
+#ifdef USERPREFS_UI_TEST_LOG
+void Screen::logFrameChange(const char *reason, uint8_t targetIdx)
+{
+    // Reverse-map an index to a stable name string keyed off FramePositions
+    // field names — so the pytest harness can assert `name=nodelist_nodes`
+    // without caring about how the positions were ordered this boot.
+    const auto &p = framesetInfo.positions;
+    const char *name = "unknown";
+    if (targetIdx == p.home)
+        name = "home";
+    else if (targetIdx == p.deviceFocused)
+        name = "deviceFocused";
+    else if (targetIdx == p.textMessage)
+        name = "textMessage";
+    else if (targetIdx == p.nodelist_nodes)
+        name = "nodelist_nodes";
+    else if (targetIdx == p.nodelist_location)
+        name = "nodelist_location";
+    else if (targetIdx == p.nodelist_lastheard)
+        name = "nodelist_lastheard";
+    else if (targetIdx == p.nodelist_hopsignal)
+        name = "nodelist_hopsignal";
+    else if (targetIdx == p.nodelist_distance)
+        name = "nodelist_distance";
+    else if (targetIdx == p.nodelist_bearings)
+        name = "nodelist_bearings";
+    else if (targetIdx == p.system)
+        name = "system";
+    else if (targetIdx == p.gps)
+        name = "gps";
+    else if (targetIdx == p.lora)
+        name = "lora";
+    else if (targetIdx == p.clock)
+        name = "clock";
+    else if (targetIdx == p.chirpy)
+        name = "chirpy";
+    else if (targetIdx == p.fault)
+        name = "fault";
+    else if (targetIdx == p.waypoint)
+        name = "waypoint";
+    else if (targetIdx == p.focusedModule)
+        name = "focusedModule";
+    else if (targetIdx == p.log)
+        name = "log";
+    else if (targetIdx == p.settings)
+        name = "settings";
+    else if (targetIdx == p.wifi)
+        name = "wifi";
+    else if (p.firstFavorite != 255 && p.lastFavorite != 255 && targetIdx >= p.firstFavorite && targetIdx <= p.lastFavorite)
+        name = "favorite";
+    LOG_INFO("Screen: frame %u/%u name=%s reason=%s", (unsigned)targetIdx, (unsigned)framesetInfo.frameCount, name, reason);
+}
+#endif
+
 void Screen::showFrame(FrameDirection direction)
 {
     // Only advance frames when UI is stable
     if (ui->getUiState()->frameState == FIXED) {
 
+#ifdef USERPREFS_UI_TEST_LOG
+        // Log the *intended* target before the (async) transition fires, so
+        // tests see a deterministic record of what was requested.
+        if (framesetInfo.frameCount > 0) {
+            uint8_t curr = ui->getUiState()->currentFrame;
+            uint8_t target = (direction == FrameDirection::NEXT)
+                                 ? (uint8_t)((curr + 1) % framesetInfo.frameCount)
+                                 : (uint8_t)((curr + framesetInfo.frameCount - 1) % framesetInfo.frameCount);
+            logFrameChange(direction == FrameDirection::NEXT ? "next" : "prev", target);
+        }
+#endif
+
         if (direction == FrameDirection::NEXT) {
             ui->nextFrame();
         } else {
@@ -1847,22 +1955,37 @@ int Screen::handleInputEvent(const InputEvent *event)
                 showFrame(FrameDirection::NEXT);
             } else if (event->inputEvent == INPUT_BROKER_FN_F1) {
                 this->ui->switchToFrame(0);
+#ifdef USERPREFS_UI_TEST_LOG
+                logFrameChange("fn_f1", 0);
+#endif
                 lastScreenTransition = millis();
                 setFastFramerate();
             } else if (event->inputEvent == INPUT_BROKER_FN_F2) {
                 this->ui->switchToFrame(1);
+#ifdef USERPREFS_UI_TEST_LOG
+                logFrameChange("fn_f2", 1);
+#endif
                 lastScreenTransition = millis();
                 setFastFramerate();
             } else if (event->inputEvent == INPUT_BROKER_FN_F3) {
                 this->ui->switchToFrame(2);
+#ifdef USERPREFS_UI_TEST_LOG
+                logFrameChange("fn_f3", 2);
+#endif
                 lastScreenTransition = millis();
                 setFastFramerate();
             } else if (event->inputEvent == INPUT_BROKER_FN_F4) {
                 this->ui->switchToFrame(3);
+#ifdef USERPREFS_UI_TEST_LOG
+                logFrameChange("fn_f4", 3);
+#endif
                 lastScreenTransition = millis();
                 setFastFramerate();
             } else if (event->inputEvent == INPUT_BROKER_FN_F5) {
                 this->ui->switchToFrame(4);
+#ifdef USERPREFS_UI_TEST_LOG
+                logFrameChange("fn_f5", 4);
+#endif
                 lastScreenTransition = millis();
                 setFastFramerate();
             } else if (event->inputEvent == INPUT_BROKER_UP_LONG) {
@@ -1897,6 +2020,8 @@ int Screen::handleInputEvent(const InputEvent *event)
                             menuHandler::textMessageBaseMenu();
                         }
                     }
+                } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.environment) {
+                    menuHandler::environmentTelemetryBaseMenu();
                 } else if (framesetInfo.positions.firstFavorite != 255 &&
                            this->ui->getUiState()->currentFrame >= framesetInfo.positions.firstFavorite &&
                            this->ui->getUiState()->currentFrame <= framesetInfo.positions.lastFavorite) {

src/graphics/Screen.h

@@ -12,7 +12,7 @@
 #define getStringCenteredX(s) ((SCREEN_WIDTH - display->getStringWidth(s)) / 2)
 namespace graphics
 {
-enum notificationTypeEnum { none, text_banner, selection_picker, node_picker, number_picker, text_input };
+enum notificationTypeEnum { none, text_banner, selection_picker, node_picker, number_picker, signed_decimal_picker, text_input };
 
 struct BannerOverlayOptions {
     const char *message;
@@ -312,6 +312,8 @@ class Screen : public concurrency::OSThread
 
     void showNodePicker(const char *message, uint32_t durationMs, std::function<void(uint32_t)> bannerCallback);
     void showNumberPicker(const char *message, uint32_t durationMs, uint8_t digits, std::function<void(uint32_t)> bannerCallback);
+    void showSignedDecimalPicker(const char *message, uint32_t durationMs, int initialValueTenths, int minValueTenths,
+                                 int maxValueTenths, std::function<void(int)> bannerCallback);
     void showTextInput(const char *header, const char *initialText, uint32_t durationMs,
                        std::function<void(const std::string &)> textCallback);
 
@@ -669,6 +671,16 @@ class Screen : public concurrency::OSThread
     void handleOnPress();
     void handleStartFirmwareUpdateScreen();
 
+#ifdef USERPREFS_UI_TEST_LOG
+    // Test-only: emits one LOG_INFO line on every frame transition so the
+    // pytest harness can assert which frame is shown. Gated behind a macro
+    // so the chatty log doesn't ship in release builds. Enabled via
+    // build_testing_profile(enable_ui_log=True) in mcp-server/userprefs.py.
+    // Member function (not free) because FramesetInfo is a private nested
+    // type — only methods of Screen can reach it.
+    void logFrameChange(const char *reason, uint8_t targetIdx);
+#endif
+
     // Info collected by setFrames method.
     // Index location of specific frames.
     // - Used to apply the FrameFocus parameter of setFrames
@@ -697,6 +709,7 @@ class Screen : public concurrency::OSThread
             uint8_t firstFavorite = 255;
             uint8_t lastFavorite = 255;
             uint8_t lora = 255;
+            uint8_t environment = 255;
         } positions;
 
         uint8_t frameCount = 0;

src/graphics/draw/MenuHandler.cpp

@@ -58,6 +58,32 @@ BannerOverlayOptions createStaticBannerOptions(const char *message, const MenuOp
     return bannerOptions;
 }
 
+constexpr float kTemperatureOffsetMinC = -20.0f;
+constexpr float kTemperatureOffsetMaxC = 20.0f;
+constexpr float kTemperatureOffsetDeltaFPerC = 1.8f;
+
+bool useImperialTemperatureOffsetUnits()
+{
+    return config.display.units == meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL ||
+           moduleConfig.telemetry.environment_display_fahrenheit;
+}
+
+float clampTemperatureOffsetC(float offsetC)
+{
+    if (offsetC < kTemperatureOffsetMinC) {
+        return kTemperatureOffsetMinC;
+    }
+    if (offsetC > kTemperatureOffsetMaxC) {
+        return kTemperatureOffsetMaxC;
+    }
+    return offsetC;
+}
+
+int toTenthsRounded(float value)
+{
+    return (value >= 0.0f) ? static_cast<int>(value * 10.0f + 0.5f) : static_cast<int>(value * 10.0f - 0.5f);
+}
+
 } // namespace
 
 menuHandler::screenMenus menuHandler::menuQueue = MenuNone;
@@ -1009,6 +1035,52 @@ void menuHandler::textMessageMenu()
     cannedMessageModule->LaunchWithDestination(NODENUM_BROADCAST);
 }
 
+void menuHandler::environmentTelemetryBaseMenu()
+{
+    enum optionsNumbers { Back, SetTempOffset };
+
+    static const char *optionsArray[] = {"Back", "Set Temp Offset"};
+    static int optionsEnumArray[] = {Back, SetTempOffset};
+
+    BannerOverlayOptions bannerOptions;
+    bannerOptions.message = "Env Actions";
+    bannerOptions.optionsArrayPtr = optionsArray;
+    bannerOptions.optionsEnumPtr = optionsEnumArray;
+    bannerOptions.optionsCount = 2;
+    bannerOptions.bannerCallback = [](int selected) -> void {
+        if (selected == SetTempOffset) {
+            menuQueue = EnvironmentTempOffsetPicker;
+            screen->runNow();
+        }
+    };
+    screen->showOverlayBanner(bannerOptions);
+}
+
+void menuHandler::environmentTemperatureOffsetPicker()
+{
+    static char pickerTitle[40];
+
+    const bool useImperial = useImperialTemperatureOffsetUnits();
+    const char displayUnit = useImperial ? 'F' : 'C';
+    const float currentOffsetC = clampTemperatureOffsetC(moduleConfig.telemetry.environment_temperature_offset_c);
+    const float displayOffset = useImperial ? (currentOffsetC * kTemperatureOffsetDeltaFPerC) : currentOffsetC;
+    const float minDisplay = useImperial ? (kTemperatureOffsetMinC * kTemperatureOffsetDeltaFPerC) : kTemperatureOffsetMinC;
+    const float maxDisplay = useImperial ? (kTemperatureOffsetMaxC * kTemperatureOffsetDeltaFPerC) : kTemperatureOffsetMaxC;
+
+    snprintf(pickerTitle, sizeof(pickerTitle), "Set Temp Offset (%c)", displayUnit);
+    screen->showSignedDecimalPicker(pickerTitle, 60000, toTenthsRounded(displayOffset), toTenthsRounded(minDisplay),
+                                    toTenthsRounded(maxDisplay), [useImperial](int pickedTenths) -> void {
+                                        float selectedOffset = static_cast<float>(pickedTenths) / 10.0f;
+                                        if (useImperial) {
+                                            selectedOffset /= kTemperatureOffsetDeltaFPerC;
+                                        }
+
+                                        moduleConfig.telemetry.environment_temperature_offset_c =
+                                            clampTemperatureOffsetC(selectedOffset);
+                                        nodeDB->saveToDisk(SEGMENT_MODULECONFIG);
+                                    });
+}
+
 void menuHandler::textMessageBaseMenu()
 {
     enum optionsNumbers { Back, Preset, Freetext, enumEnd };
@@ -2218,9 +2290,6 @@ void menuHandler::testMenu()
     static int optionsEnumArray[5] = {Back};
     int options = 1;
 
-    optionsArray[options] = "Number Picker";
-    optionsEnumArray[options++] = NumberPicker;
-
     optionsArray[options] = screen->isFrameHidden("chirpy") ? "Show Chirpy" : "Hide Chirpy";
     optionsEnumArray[options++] = ShowChirpy;
 #ifdef HAS_I2S
@@ -2234,10 +2303,7 @@ void menuHandler::testMenu()
     bannerOptions.optionsCount = options;
     bannerOptions.optionsEnumPtr = optionsEnumArray;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == NumberPicker) {
-            menuQueue = NumberTest;
-            screen->runNow();
-        } else if (selected == ShowChirpy) {
+        if (selected == ShowChirpy) {
             screen->toggleFrameVisibility("chirpy");
             screen->setFrames(Screen::FOCUS_SYSTEM);
 
@@ -2253,12 +2319,6 @@ void menuHandler::testMenu()
     screen->showOverlayBanner(bannerOptions);
 }
 
-void menuHandler::numberTest()
-{
-    screen->showNumberPicker("Pick a number\n ", 30000, 4,
-                             [](int number_picked) -> void { LOG_WARN("Nodenum: %u", number_picked); });
-}
-
 void menuHandler::wifiBaseMenu()
 {
     enum optionsNumbers { Back, Wifi_toggle };
@@ -2754,8 +2814,8 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case TestMenu:
         testMenu();
         break;
-    case NumberTest:
-        numberTest();
+    case EnvironmentTempOffsetPicker:
+        environmentTemperatureOffsetPicker();
         break;
     case WifiToggleMenu:
         wifiToggleMenu();
@@ -2810,4 +2870,4 @@ void menuHandler::saveUIConfig()
 
 } // namespace graphics
 
-#endif
+#endif

src/graphics/draw/MenuHandler.h

@@ -38,7 +38,7 @@ class menuHandler
         ManageNodeMenu,
         RemoveFavorite,
         TestMenu,
-        NumberTest,
+        EnvironmentTempOffsetPicker,
         WifiToggleMenu,
         BluetoothToggleMenu,
         ScreenOptionsMenu,
@@ -78,6 +78,7 @@ class menuHandler
     static void deleteMessagesMenu();
     static void homeBaseMenu();
     static void textMessageBaseMenu();
+    static void environmentTelemetryBaseMenu();
     static void systemBaseMenu();
     static void favoriteBaseMenu();
     static void positionBaseMenu();
@@ -101,7 +102,7 @@ class menuHandler
     static void removeFavoriteMenu();
     static void traceRouteMenu();
     static void testMenu();
-    static void numberTest();
+    static void environmentTemperatureOffsetPicker();
     static void wifiBaseMenu();
     static void wifiToggleMenu();
     static void screenOptionsMenu();

src/graphics/draw/NodeListRenderer.cpp

@@ -275,9 +275,12 @@ void drawEntryHopSignal(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int
 
     int nameMaxWidth = getNodeNameMaxWidth(columnWidth, columnWidth - 25);
     int barsOffset = (currentResolution == ScreenResolution::High) ? (isLeftCol ? 20 : 24) : (isLeftCol ? 15 : 19);
-    int hopOffset = (currentResolution == ScreenResolution::High) ? (isLeftCol ? 21 : 29) : (isLeftCol ? 13 : 17);
+    constexpr int kBarCount = 4;
+    constexpr int kBarWidth = 2;
+    constexpr int kBarGap = 1;
 
     int barsXOffset = columnWidth - barsOffset;
+    int barsRightEdge = x + barsXOffset + ((kBarCount - 1) * (kBarWidth + kBarGap)) + kBarWidth;
 
     const int nameX = x + ((currentResolution == ScreenResolution::High) ? 6 : 3);
     char nodeName[96];
@@ -304,28 +307,35 @@ void drawEntryHopSignal(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int
         }
     }
 
-    // Draw signal strength bars
-    int bars = (node->snr > 5) ? 4 : (node->snr > 0) ? 3 : (node->snr > -5) ? 2 : (node->snr > -10) ? 1 : 0;
-    int barWidth = 2;
-    int barStartX = x + barsXOffset;
-    int barStartY = y + 1 + (FONT_HEIGHT_SMALL / 2) + 2;
+    const bool isZeroHop = node->has_hops_away && node->hops_away == 0;
 
-    for (int b = 0; b < 4; b++) {
-        if (b < bars) {
-            int height = (b * 2);
-            display->fillRect(barStartX + (b * (barWidth + 1)), barStartY - height, barWidth, height);
+    // Show signal only for direct neighbors (0 hops)
+    if (isZeroHop) {
+        int bars = (node->snr > 5) ? 4 : (node->snr > 0) ? 3 : (node->snr > -5) ? 2 : (node->snr > -10) ? 1 : 0;
+        int barStartX = x + barsXOffset;
+        int barStartY = y + 1 + (FONT_HEIGHT_SMALL / 2) + 2;
+
+        for (int b = 0; b < kBarCount; b++) {
+            if (b < bars) {
+                int height = (b * 2);
+                display->fillRect(barStartX + (b * (kBarWidth + kBarGap)), barStartY - height, kBarWidth, height);
+            }
         }
     }
 
-    // Draw hop count
-    char hopStr[6] = "";
-    if (node->has_hops_away && node->hops_away > 0)
-        snprintf(hopStr, sizeof(hopStr), "[%d]", node->hops_away);
+    // Draw hop count + hop icon
+    if (node->has_hops_away && node->hops_away > 0) {
+        char hopCount[6];
+        snprintf(hopCount, sizeof(hopCount), "%d", node->hops_away);
 
-    if (hopStr[0] != '\0') {
-        int rightEdge = x + columnWidth - hopOffset;
-        int textWidth = display->getStringWidth(hopStr);
-        display->drawString(rightEdge - textWidth, y, hopStr);
+        const int hopCountWidth = display->getStringWidth(hopCount);
+        const int gap = 1;
+        const int totalWidth = hopCountWidth + gap + hop_width;
+        const int hopX = barsRightEdge - totalWidth;
+        const int iconY = y + (FONT_HEIGHT_SMALL - hop_height) / 2;
+
+        display->drawString(hopX, y, hopCount);
+        display->drawXbm(hopX + hopCountWidth + gap, iconY, hop_width, hop_height, hop);
     }
 }
 

src/graphics/draw/NotificationRenderer.cpp

@@ -15,6 +15,7 @@
 #endif
 #include "main.h"
 #include <algorithm>
+#include <limits>
 #include <string>
 #include <vector>
 #if HAS_TRACKBALL
@@ -52,16 +53,292 @@ bool NotificationRenderer::pauseBanner = false;
 notificationTypeEnum NotificationRenderer::current_notification_type = notificationTypeEnum::none;
 uint32_t NotificationRenderer::numDigits = 0;
 uint32_t NotificationRenderer::currentNumber = 0;
+int16_t NotificationRenderer::signedDecimalValueTenths = 0;
+int16_t NotificationRenderer::signedDecimalMinTenths = -999;
+int16_t NotificationRenderer::signedDecimalMaxTenths = 999;
+bool NotificationRenderer::signedDecimalIsNegative = false;
 VirtualKeyboard *NotificationRenderer::virtualKeyboard = nullptr;
 std::function<void(const std::string &)> NotificationRenderer::textInputCallback = nullptr;
 
-uint32_t pow_of_10(uint32_t n)
+struct NumericSlotPickerState {
+    std::vector<uint8_t> digits;
+    bool hasSign = false;
+    bool isNegative = false;
+    uint8_t decimalDigits = 0;
+    int32_t minValue = 0;
+    int32_t maxValue = 0;
+};
+
+int32_t maxValueForDigits(uint8_t digitCount)
 {
-    uint32_t ret = 1;
-    for (uint32_t i = 0; i < n; i++) {
-        ret *= 10;
+    int64_t value = 0;
+    for (uint8_t i = 0; i < digitCount; i++) {
+        value = (value * 10) + 9;
+        if (value > std::numeric_limits<int32_t>::max()) {
+            return std::numeric_limits<int32_t>::max();
+        }
     }
-    return ret;
+    return static_cast<int32_t>(value);
+}
+
+uint8_t pickerSlotCount(const NumericSlotPickerState &state)
+{
+    return static_cast<uint8_t>(state.digits.size() + (state.hasSign ? 1 : 0));
+}
+
+int32_t clampPickerValue(int32_t value, int32_t minValue, int32_t maxValue)
+{
+    if (value < minValue) {
+        return minValue;
+    }
+    if (value > maxValue) {
+        return maxValue;
+    }
+    return value;
+}
+
+uint32_t combinePickerDigits(const std::vector<uint8_t> &digits)
+{
+    uint32_t value = 0;
+    for (const uint8_t digit : digits) {
+        value = (value * 10) + digit;
+    }
+    return value;
+}
+
+void splitPickerDigits(uint32_t value, std::vector<uint8_t> &digits)
+{
+    if (digits.empty()) {
+        return;
+    }
+
+    for (int i = static_cast<int>(digits.size()) - 1; i >= 0; i--) {
+        digits[static_cast<size_t>(i)] = static_cast<uint8_t>(value % 10);
+        value /= 10;
+    }
+}
+
+int32_t composePickerValue(const NumericSlotPickerState &state)
+{
+    int64_t value = static_cast<int64_t>(combinePickerDigits(state.digits));
+    if (state.hasSign && state.isNegative && value != 0) {
+        value = -value;
+    }
+    return clampPickerValue(static_cast<int32_t>(value), state.minValue, state.maxValue);
+}
+
+void normalizePickerState(NumericSlotPickerState &state)
+{
+    const bool keepNegativeZero = state.isNegative;
+    const int32_t clampedValue = composePickerValue(state);
+    const uint32_t absValue =
+        (clampedValue < 0) ? static_cast<uint32_t>(-static_cast<int64_t>(clampedValue)) : static_cast<uint32_t>(clampedValue);
+    splitPickerDigits(absValue, state.digits);
+
+    if (!state.hasSign) {
+        state.isNegative = false;
+        return;
+    }
+
+    if (clampedValue < 0) {
+        state.isNegative = true;
+    } else if (clampedValue > 0) {
+        state.isNegative = false;
+    } else {
+        // Keep selected sign for zero so users can pick +/- before entering digits.
+        state.isNegative = keepNegativeZero;
+    }
+}
+
+bool isPickerIncrementEvent(uint8_t eventType)
+{
+    return eventType == INPUT_BROKER_UP || eventType == INPUT_BROKER_ALT_PRESS || eventType == INPUT_BROKER_UP_LONG;
+}
+
+bool isPickerDecrementEvent(uint8_t eventType)
+{
+    return eventType == INPUT_BROKER_DOWN || eventType == INPUT_BROKER_USER_PRESS || eventType == INPUT_BROKER_DOWN_LONG;
+}
+
+void applyPickerDelta(NumericSlotPickerState &state, int8_t selectedSlot, int8_t delta)
+{
+    const uint8_t slotCount = pickerSlotCount(state);
+    if (selectedSlot < 0 || selectedSlot >= static_cast<int8_t>(slotCount)) {
+        return;
+    }
+
+    if (state.hasSign && selectedSlot == 0) {
+        state.isNegative = !state.isNegative;
+        normalizePickerState(state);
+        return;
+    }
+
+    const int8_t digitOffset = state.hasSign ? 1 : 0;
+    const int8_t digitIndex = selectedSlot - digitOffset;
+    if (digitIndex < 0 || digitIndex >= static_cast<int8_t>(state.digits.size())) {
+        return;
+    }
+
+    uint8_t &digit = state.digits[static_cast<size_t>(digitIndex)];
+    if (delta > 0) {
+        digit = static_cast<uint8_t>((digit + 1) % 10);
+    } else {
+        digit = static_cast<uint8_t>((digit == 0) ? 9 : (digit - 1));
+    }
+    normalizePickerState(state);
+}
+
+bool applyPickerKeypress(NumericSlotPickerState &state, int8_t selectedSlot, char key)
+{
+    const uint8_t slotCount = pickerSlotCount(state);
+    if (selectedSlot < 0 || selectedSlot >= static_cast<int8_t>(slotCount)) {
+        return false;
+    }
+
+    if (state.hasSign && selectedSlot == 0 && (key == '+' || key == '-')) {
+        state.isNegative = (key == '-');
+        normalizePickerState(state);
+        return true;
+    }
+
+    if (key < '0' || key > '9') {
+        return false;
+    }
+
+    const int8_t digitOffset = state.hasSign ? 1 : 0;
+    const int8_t digitIndex = selectedSlot - digitOffset;
+    if (digitIndex < 0 || digitIndex >= static_cast<int8_t>(state.digits.size())) {
+        return false;
+    }
+
+    state.digits[static_cast<size_t>(digitIndex)] = static_cast<uint8_t>(key - '0');
+    normalizePickerState(state);
+    return true;
+}
+
+void parseBannerLines(const char *lineStarts[MAX_LINES + 1], uint16_t &lineCount)
+{
+    lineCount = 0;
+    char *alertEnd = NotificationRenderer::alertBannerMessage +
+                     strnlen(NotificationRenderer::alertBannerMessage, sizeof(NotificationRenderer::alertBannerMessage));
+    lineStarts[lineCount] = NotificationRenderer::alertBannerMessage;
+    while ((lineCount < MAX_LINES) && (lineStarts[lineCount] < alertEnd)) {
+        lineStarts[lineCount + 1] = std::find((char *)lineStarts[lineCount], alertEnd, '\n');
+        if (lineStarts[lineCount + 1][0] == '\n') {
+            lineStarts[lineCount + 1] += 1;
+        }
+        lineCount++;
+    }
+}
+
+void buildNumericPickerDisplay(const NumericSlotPickerState &state, std::string &formattedValue,
+                               std::vector<int16_t> &slotCharIndexBySlot)
+{
+    const uint8_t slotCount = pickerSlotCount(state);
+    slotCharIndexBySlot.assign(slotCount, -1);
+
+    formattedValue = " ";
+    formattedValue.reserve(24);
+    int8_t slot = 0;
+
+    if (state.hasSign) {
+        slotCharIndexBySlot[slot++] = static_cast<int16_t>(formattedValue.size());
+        formattedValue += state.isNegative ? '-' : '+';
+        formattedValue += ' ';
+    }
+
+    const size_t digitCount = state.digits.size();
+    const size_t decimalBreak =
+        (state.decimalDigits > 0 && state.decimalDigits < digitCount) ? (digitCount - state.decimalDigits) : digitCount;
+    for (size_t i = 0; i < digitCount; i++) {
+        slotCharIndexBySlot[slot++] = static_cast<int16_t>(formattedValue.size());
+        formattedValue += static_cast<char>('0' + state.digits[i]);
+        formattedValue += ' ';
+
+        if (state.decimalDigits > 0 && i + 1 == decimalBreak) {
+            formattedValue += '.';
+            formattedValue += ' ';
+        }
+    }
+}
+
+// Number picker renderer
+// Reuse by building `formattedValue` as displayed, and mapping each editable slot
+// to its character index in that string via `slotCharIndexBySlot`.
+void NumberPicker(OLEDDisplay *display, OLEDDisplayUiState *state, const char *lineStarts[MAX_LINES + 1], uint16_t lineCount,
+                  const std::string &formattedValue, const int16_t *slotCharIndexBySlot, uint8_t slotCount, int8_t selectedSlot)
+{
+    if (formattedValue.empty() || slotCharIndexBySlot == nullptr || slotCount == 0) {
+        return;
+    }
+
+    std::string spacer(formattedValue.size(), ' ');
+    uint16_t totalLines = lineCount + 3;
+    const char *linePointers[totalLines + 1] = {0};
+    for (uint16_t i = 0; i < lineCount; i++) {
+        linePointers[i] = lineStarts[i];
+    }
+    const uint16_t topGuideLineIndex = lineCount;
+    linePointers[lineCount++] = spacer.c_str();
+    const uint16_t valueLineIndex = lineCount;
+    linePointers[lineCount++] = formattedValue.c_str();
+    const uint16_t bottomGuideLineIndex = lineCount;
+    linePointers[lineCount++] = spacer.c_str();
+
+    NotificationRenderer::drawNotificationBox(display, state, linePointers, totalLines, 0);
+
+    constexpr uint16_t hPadding = 5;
+    constexpr uint16_t vPadding = 2;
+    uint16_t maxWidth = 0;
+    uint16_t lineWidths[MAX_LINES + 3] = {0};
+    for (uint16_t i = 0; i < totalLines; i++) {
+        const uint16_t lineLength = static_cast<uint16_t>(strlen(linePointers[i]));
+        lineWidths[i] = display->getStringWidth(linePointers[i], lineLength, true);
+        if (lineWidths[i] > maxWidth) {
+            maxWidth = lineWidths[i];
+        }
+    }
+
+    uint16_t boxWidth = hPadding * 2 + maxWidth;
+    uint16_t screenHeight = display->height();
+    uint8_t effectiveLineHeight = FONT_HEIGHT_SMALL - 3;
+    uint8_t visibleTotalLines = std::min<uint8_t>(totalLines, (screenHeight - vPadding * 2) / effectiveLineHeight);
+    uint16_t contentHeight = visibleTotalLines * effectiveLineHeight;
+    uint16_t boxHeight = contentHeight + vPadding * 2;
+    if (visibleTotalLines == 1) {
+        boxHeight += (currentResolution == ScreenResolution::High) ? 4 : 3;
+    }
+    int16_t boxLeft = (display->width() / 2) - (boxWidth / 2);
+    if (totalLines > visibleTotalLines) {
+        boxWidth += (currentResolution == ScreenResolution::High) ? 4 : 2;
+    }
+    int16_t boxTop = (display->height() / 2) - (boxHeight / 2);
+
+    const int selectedSlotClamped = std::max<int>(0, std::min<int>(selectedSlot, static_cast<int>(slotCount) - 1));
+    const int selectedCharIndex = slotCharIndexBySlot[selectedSlotClamped];
+    if (selectedCharIndex < 0 || selectedCharIndex >= static_cast<int>(formattedValue.size())) {
+        return;
+    }
+
+    int16_t valueTextX = boxLeft + (boxWidth - lineWidths[valueLineIndex]) / 2;
+    const uint16_t prefixWidth = display->getStringWidth(formattedValue.c_str(), selectedCharIndex, true);
+    const uint16_t slotCharWidth = display->getStringWidth(formattedValue.c_str() + selectedCharIndex, 1, true);
+    const int16_t slotCenterX = valueTextX + static_cast<int16_t>(prefixWidth + (slotCharWidth / 2));
+
+    int16_t topGuideY = boxTop + vPadding + (topGuideLineIndex * effectiveLineHeight);
+    int16_t bottomGuideY = boxTop + vPadding + (bottomGuideLineIndex * effectiveLineHeight);
+    const int16_t triHalfWidth = (currentResolution == ScreenResolution::High) ? 3 : 2;
+    const int16_t guideInsetY = 1;
+    const int16_t triHeight = std::max<int16_t>(2, static_cast<int16_t>((effectiveLineHeight - (guideInsetY * 2) - 1) / 2));
+    const int16_t topBaseY = topGuideY + effectiveLineHeight - guideInsetY - 1;
+    const int16_t topApexY = topBaseY - triHeight;
+    const int16_t bottomBaseY = bottomGuideY + guideInsetY;
+    const int16_t bottomApexY = bottomBaseY + triHeight;
+
+    display->setColor(WHITE);
+    display->fillTriangle(slotCenterX, topApexY, slotCenterX - triHalfWidth, topBaseY, slotCenterX + triHalfWidth, topBaseY);
+    display->fillTriangle(slotCenterX - triHalfWidth, bottomBaseY, slotCenterX + triHalfWidth, bottomBaseY, slotCenterX,
+                          bottomApexY);
 }
 
 // Used on boot when a certificate is being created
@@ -103,6 +380,10 @@ void NotificationRenderer::resetBanner()
     pauseBanner = false;
     numDigits = 0;
     currentNumber = 0;
+    signedDecimalValueTenths = 0;
+    signedDecimalMinTenths = -999;
+    signedDecimalMaxTenths = 999;
+    signedDecimalIsNegative = false;
 
     nodeDB->pause_sort(false);
 
@@ -153,6 +434,9 @@ void NotificationRenderer::drawBannercallback(OLEDDisplay *display, OLEDDisplayU
     case notificationTypeEnum::number_picker:
         drawNumberPicker(display, state);
         break;
+    case notificationTypeEnum::signed_decimal_picker:
+        drawSignedDecimalPicker(display, state);
+        break;
     }
 }
 
@@ -160,83 +444,132 @@ void NotificationRenderer::drawNumberPicker(OLEDDisplay *display, OLEDDisplayUiS
 {
     const char *lineStarts[MAX_LINES + 1] = {0};
     uint16_t lineCount = 0;
+    parseBannerLines(lineStarts, lineCount);
 
-    // Parse lines
-    char *alertEnd = alertBannerMessage + strnlen(alertBannerMessage, sizeof(alertBannerMessage));
-    lineStarts[lineCount] = alertBannerMessage;
+    NumericSlotPickerState pickerState;
+    pickerState.hasSign = false;
+    pickerState.decimalDigits = 0;
+    pickerState.minValue = 0;
+    pickerState.maxValue = maxValueForDigits(static_cast<uint8_t>(numDigits));
+    pickerState.digits.assign(numDigits, 0);
+    splitPickerDigits(currentNumber, pickerState.digits);
+    normalizePickerState(pickerState);
 
-    // Find lines
-    while ((lineCount < MAX_LINES) && (lineStarts[lineCount] < alertEnd)) {
-        lineStarts[lineCount + 1] = std::find((char *)lineStarts[lineCount], alertEnd, '\n');
-        if (lineStarts[lineCount + 1][0] == '\n')
-            lineStarts[lineCount + 1] += 1;
-        lineCount++;
+    const uint8_t slotCount = pickerSlotCount(pickerState);
+    if (curSelected < 0) {
+        curSelected = 0;
+    } else if (curSelected > static_cast<int8_t>(slotCount)) {
+        curSelected = static_cast<int8_t>(slotCount);
     }
-    // modulo to extract
-    uint8_t this_digit = (currentNumber % (pow_of_10(numDigits - curSelected))) / (pow_of_10(numDigits - curSelected - 1));
-    // Handle input
-    if (inEvent.inputEvent == INPUT_BROKER_UP || inEvent.inputEvent == INPUT_BROKER_ALT_PRESS ||
-        inEvent.inputEvent == INPUT_BROKER_UP_LONG) {
-        if (this_digit == 9) {
-            currentNumber -= 9 * (pow_of_10(numDigits - curSelected - 1));
-        } else {
-            currentNumber += (pow_of_10(numDigits - curSelected - 1));
-        }
-    } else if (inEvent.inputEvent == INPUT_BROKER_DOWN || inEvent.inputEvent == INPUT_BROKER_USER_PRESS ||
-               inEvent.inputEvent == INPUT_BROKER_DOWN_LONG) {
-        if (this_digit == 0) {
-            currentNumber += 9 * (pow_of_10(numDigits - curSelected - 1));
-        } else {
-            currentNumber -= (pow_of_10(numDigits - curSelected - 1));
-        }
+
+    if ((inEvent.inputEvent == INPUT_BROKER_CANCEL || inEvent.inputEvent == INPUT_BROKER_ALT_LONG) && alertBannerUntil != 0) {
+        resetBanner();
+        return;
+    }
+
+    if (isPickerIncrementEvent(inEvent.inputEvent)) {
+        applyPickerDelta(pickerState, curSelected, 1);
+    } else if (isPickerDecrementEvent(inEvent.inputEvent)) {
+        applyPickerDelta(pickerState, curSelected, -1);
     } else if (inEvent.inputEvent == INPUT_BROKER_ANYKEY) {
-        if (inEvent.kbchar > 47 && inEvent.kbchar < 58) { // have a digit
-            currentNumber -= this_digit * (pow_of_10(numDigits - curSelected - 1));
-            currentNumber += (inEvent.kbchar - 48) * (pow_of_10(numDigits - curSelected - 1));
+        if (applyPickerKeypress(pickerState, curSelected, inEvent.kbchar)) {
             curSelected++;
         }
     } else if (inEvent.inputEvent == INPUT_BROKER_SELECT || inEvent.inputEvent == INPUT_BROKER_RIGHT) {
         curSelected++;
     } else if (inEvent.inputEvent == INPUT_BROKER_LEFT) {
-        curSelected--;
-    } else if ((inEvent.inputEvent == INPUT_BROKER_CANCEL || inEvent.inputEvent == INPUT_BROKER_ALT_LONG) &&
-               alertBannerUntil != 0) {
-        resetBanner();
-        return;
+        curSelected = std::max<int8_t>(0, curSelected - 1);
     }
-    if (curSelected == static_cast<int8_t>(numDigits)) {
+
+    currentNumber = static_cast<uint32_t>(std::max<int32_t>(0, composePickerValue(pickerState)));
+    if (curSelected == static_cast<int8_t>(slotCount)) {
         alertBannerCallback(currentNumber);
         resetBanner();
         return;
     }
 
     inEvent.inputEvent = INPUT_BROKER_NONE;
-    if (alertBannerMessage[0] == '\0')
+    if (alertBannerMessage[0] == '\0') {
         return;
-
-    uint16_t totalLines = lineCount + 2;
-    const char *linePointers[totalLines + 1] = {0}; // this is sort of a dynamic allocation
-
-    // copy the linestarts to display to the linePointers holder
-    for (uint16_t i = 0; i < lineCount; i++) {
-        linePointers[i] = lineStarts[i];
     }
-    std::string digits = " ";
-    std::string arrowPointer = " ";
-    for (uint16_t i = 0; i < numDigits; i++) {
-        // Modulo minus modulo to return just the current number
-        digits += std::to_string((currentNumber % (pow_of_10(numDigits - i))) / (pow_of_10(numDigits - i - 1))) + " ";
-        if (curSelected == i) {
-            arrowPointer += "^ ";
-        } else {
-            arrowPointer += "_ ";
+
+    std::string formattedValue;
+    std::vector<int16_t> slotCharIndexBySlot;
+    buildNumericPickerDisplay(pickerState, formattedValue, slotCharIndexBySlot);
+
+    NumberPicker(display, state, lineStarts, lineCount, formattedValue, slotCharIndexBySlot.data(), slotCount, curSelected);
+}
+
+void NotificationRenderer::drawSignedDecimalPicker(OLEDDisplay *display, OLEDDisplayUiState *state)
+{
+    const char *lineStarts[MAX_LINES + 1] = {0};
+    uint16_t lineCount = 0;
+    parseBannerLines(lineStarts, lineCount);
+
+    NumericSlotPickerState pickerState;
+    pickerState.hasSign = true;
+    pickerState.decimalDigits = 1;
+    pickerState.minValue = signedDecimalMinTenths;
+    pickerState.maxValue = signedDecimalMaxTenths;
+    pickerState.digits.assign(3, 0); // XX.X format
+
+    const int32_t currentValue = static_cast<int32_t>(signedDecimalValueTenths);
+    if (currentValue < 0) {
+        pickerState.isNegative = true;
+    } else if (currentValue > 0) {
+        pickerState.isNegative = false;
+    } else {
+        pickerState.isNegative = signedDecimalIsNegative;
+    }
+    const uint32_t absValue =
+        (currentValue < 0) ? static_cast<uint32_t>(-static_cast<int64_t>(currentValue)) : static_cast<uint32_t>(currentValue);
+    splitPickerDigits(absValue, pickerState.digits);
+    normalizePickerState(pickerState);
+
+    const uint8_t slotCount = pickerSlotCount(pickerState);
+    if (curSelected < 0) {
+        curSelected = 0;
+    } else if (curSelected > static_cast<int8_t>(slotCount)) {
+        curSelected = static_cast<int8_t>(slotCount);
+    }
+
+    if ((inEvent.inputEvent == INPUT_BROKER_CANCEL || inEvent.inputEvent == INPUT_BROKER_ALT_LONG) && alertBannerUntil != 0) {
+        resetBanner();
+        return;
+    }
+
+    if (isPickerIncrementEvent(inEvent.inputEvent)) {
+        applyPickerDelta(pickerState, curSelected, 1);
+    } else if (isPickerDecrementEvent(inEvent.inputEvent)) {
+        applyPickerDelta(pickerState, curSelected, -1);
+    } else if (inEvent.inputEvent == INPUT_BROKER_ANYKEY) {
+        if (applyPickerKeypress(pickerState, curSelected, inEvent.kbchar)) {
+            curSelected++;
         }
+    } else if (inEvent.inputEvent == INPUT_BROKER_SELECT || inEvent.inputEvent == INPUT_BROKER_RIGHT) {
+        curSelected++;
+    } else if (inEvent.inputEvent == INPUT_BROKER_LEFT) {
+        curSelected = std::max<int8_t>(0, curSelected - 1);
     }
 
-    linePointers[lineCount++] = digits.c_str();
-    linePointers[lineCount++] = arrowPointer.c_str();
+    signedDecimalValueTenths = static_cast<int16_t>(composePickerValue(pickerState));
+    signedDecimalIsNegative = pickerState.isNegative;
+    if (curSelected == static_cast<int8_t>(slotCount)) {
+        alertBannerCallback(signedDecimalValueTenths);
+        resetBanner();
+        return;
+    }
 
-    drawNotificationBox(display, state, linePointers, totalLines, 0);
+    inEvent.inputEvent = INPUT_BROKER_NONE;
+    if (alertBannerMessage[0] == '\0') {
+        return;
+    }
+
+    std::string formattedValue;
+    std::vector<int16_t> slotCharIndexBySlot;
+    buildNumericPickerDisplay(pickerState, formattedValue, slotCharIndexBySlot);
+
+    NumberPicker(display, state, lineStarts, lineCount, formattedValue, slotCharIndexBySlot.data(), slotCount, curSelected);
 }
 
 void NotificationRenderer::drawNodePicker(OLEDDisplay *display, OLEDDisplayUiState *state)
@@ -622,7 +955,9 @@ void NotificationRenderer::drawNotificationBox(OLEDDisplay *display, OLEDDisplay
         strncpy(lineBuffer, lines[i], lineLengths[i]);
         lineBuffer[lineLengths[i]] = '\0';
         // Determine if this is a pop-up or a pick list
-        if (alertBannerOptions > 0 && i == 0) {
+        const bool highlightTitleRow =
+            (i == 0) && (alertBannerOptions > 0 || current_notification_type == notificationTypeEnum::signed_decimal_picker);
+        if (highlightTitleRow) {
             // Pick List
             display->setColor(WHITE);
             int background_yOffset = 1;

src/graphics/draw/NotificationRenderer.h

@@ -5,6 +5,7 @@
 #include "graphics/Screen.h"
 #include "graphics/VirtualKeyboard.h"
 #include "modules/OnScreenKeyboardModule.h"
+#include <cstdint>
 #include <functional>
 #include <string>
 #define MAX_LINES 5
@@ -26,6 +27,10 @@ class NotificationRenderer
     static std::function<void(int)> alertBannerCallback;
     static uint32_t numDigits;
     static uint32_t currentNumber;
+    static int16_t signedDecimalValueTenths;
+    static int16_t signedDecimalMinTenths;
+    static int16_t signedDecimalMaxTenths;
+    static bool signedDecimalIsNegative;
     static VirtualKeyboard *virtualKeyboard;
     static std::function<void(const std::string &)> textInputCallback;
 
@@ -36,6 +41,7 @@ class NotificationRenderer
     static void drawBannercallback(OLEDDisplay *display, OLEDDisplayUiState *state);
     static void drawAlertBannerOverlay(OLEDDisplay *display, OLEDDisplayUiState *state);
     static void drawNumberPicker(OLEDDisplay *display, OLEDDisplayUiState *state);
+    static void drawSignedDecimalPicker(OLEDDisplay *display, OLEDDisplayUiState *state);
     static void drawNodePicker(OLEDDisplay *display, OLEDDisplayUiState *state);
     static void drawTextInput(OLEDDisplay *display, OLEDDisplayUiState *state);
     static void drawNotificationBox(OLEDDisplay *display, OLEDDisplayUiState *state, const char *lines[MAX_LINES + 1],

src/graphics/draw/UIRenderer.cpp

@@ -405,10 +405,10 @@ void UIRenderer::drawFavoriteNode(OLEDDisplay *display, OLEDDisplayUiState *stat
     }
 #endif
 
-    // === 2. Signal and Hops (combined on one line, if available) ===
-    char signalHopsStr[32] = "";
+    // === 2. Signal/Hops line (if available) ===
     bool haveSignal = false;
     int bars = 0;
+    const char *qualityLabel = nullptr;
 
     // Helper to get SNR limit based on modem preset
     auto getSnrLimit = [](meshtastic_Config_LoRaConfig_ModemPreset preset) -> float {
@@ -429,80 +429,51 @@ void UIRenderer::drawFavoriteNode(OLEDDisplay *display, OLEDDisplayUiState *stat
         }
     };
 
-    // Calculate signal grade using modem preset and SNR only
-    float snrLimit = getSnrLimit(config.lora.modem_preset);
-    float snr = node->snr;
-
-    // Determine signal quality label and bars using SNR-only grading
-    const char *qualityLabel = nullptr;
-
-    if (snr > snrLimit + 10) {
-        qualityLabel = "Good";
-        bars = 4;
-    } else if (snr > snrLimit + 6) {
-        qualityLabel = "Good";
-        bars = 3;
-    } else if (snr > snrLimit + 2) {
-        qualityLabel = "Good";
-        bars = 2;
-    } else if (snr > snrLimit - 4) {
-        qualityLabel = "Fair";
-        bars = 1;
-    } else {
-        qualityLabel = "Bad";
-        bars = 1;
-    }
-
     // Add extra spacing on the left if we have an API connection to account for the common footer icons
     const char *leftSideSpacing =
         graphics::isAPIConnected(service->api_state) ? (currentResolution == ScreenResolution::High ? "     " : "   ") : " ";
+    const bool isZeroHop = node->has_hops_away && node->hops_away == 0;
 
-    // --- Build the Signal/Hops line ---
-    // Only show signal if we have valid SNR
-    if (snr > -100 && snr != 0) {
-        snprintf(signalHopsStr, sizeof(signalHopsStr), "%sSig:%s", leftSideSpacing, qualityLabel);
-        haveSignal = true;
-    }
-
-    if (node->hops_away > 0) {
-        size_t len = strlen(signalHopsStr);
-        if (haveSignal) {
-            snprintf(signalHopsStr + len, sizeof(signalHopsStr) - len, " [#]");
-        } else {
-            snprintf(signalHopsStr, sizeof(signalHopsStr), "[#]");
-        }
-    }
-
-    if (signalHopsStr[0]) {
-        int yPos = getTextPositions(display)[line++];
-        int curX = x;
-
-        // Split combined string into signal text and hop suffix
-        char sigPart[20] = "";
-        const char *hopPart = nullptr;
-
-        char *bracket = strchr(signalHopsStr, '[');
-        if (bracket) {
-            size_t n = (size_t)(bracket - signalHopsStr);
-            if (n >= sizeof(sigPart))
-                n = sizeof(sigPart) - 1;
-            memcpy(sigPart, signalHopsStr, n);
-            sigPart[n] = '\0';
-
-            // Trim trailing spaces
-            while (strlen(sigPart) && sigPart[strlen(sigPart) - 1] == ' ') {
-                sigPart[strlen(sigPart) - 1] = '\0';
+    // Signal text/bars are only for direct (zero-hop) nodes with valid SNR.
+    if (isZeroHop) {
+        float snr = node->snr;
+        if (snr > -100 && snr != 0) {
+            float snrLimit = getSnrLimit(config.lora.modem_preset);
+            // Determine signal quality label and bars using SNR-only grading.
+            if (snr > snrLimit + 10) {
+                qualityLabel = "Good";
+                bars = 4;
+            } else if (snr > snrLimit + 6) {
+                qualityLabel = "Good";
+                bars = 3;
+            } else if (snr > snrLimit + 2) {
+                qualityLabel = "Good";
+                bars = 2;
+            } else if (snr > snrLimit - 4) {
+                qualityLabel = "Fair";
+                bars = 1;
+            } else {
+                qualityLabel = "Bad";
+                bars = 1;
             }
 
-            hopPart = bracket; // "[n Hop(s)]"
-        } else {
-            strncpy(sigPart, signalHopsStr, sizeof(sigPart) - 1);
-            sigPart[sizeof(sigPart) - 1] = '\0';
+            haveSignal = true;
         }
+    }
 
-        // Draw signal quality text
-        display->drawString(curX, yPos, sigPart);
-        curX += display->getStringWidth(sigPart) + 4;
+    const bool showHops = node->has_hops_away && node->hops_away > 0;
+
+    if (haveSignal || showHops) {
+        int yPos = getTextPositions(display)[line++];
+        int curX = x + display->getStringWidth(leftSideSpacing);
+
+        // Draw signal quality text for zero-hop nodes when present.
+        if (haveSignal && qualityLabel) {
+            char signalLabel[20];
+            snprintf(signalLabel, sizeof(signalLabel), "Sig:%s", qualityLabel);
+            display->drawString(curX, yPos, signalLabel);
+            curX += display->getStringWidth(signalLabel) + 4;
+        }
 
         // Draw signal bars (skip on UltraLow, text only)
         if (currentResolution != ScreenResolution::UltraLow && haveSignal && bars > 0) {
@@ -541,12 +512,12 @@ void UIRenderer::drawFavoriteNode(OLEDDisplay *display, OLEDDisplayUiState *stat
             curX += (kMaxBars * barWidth) + ((kMaxBars - 1) * barGap) + 2;
         }
 
-        // Draw hops AFTER the bars as: [ number + hop icon ]
-        if (hopPart && node->hops_away > 0) {
-
-            // open bracket
-            display->drawString(curX, yPos, "[");
-            curX += display->getStringWidth("[") + 1;
+        // Draw hops for non-zero-hop nodes as: number + hop icon.
+        // This path is mutually exclusive with the zero-hop signal-bars path above.
+        if (showHops) {
+            // hop label
+            display->drawString(curX, yPos, "Hop:");
+            curX += display->getStringWidth("Hop:") + 2;
 
             // hop count
             char hopCount[6];
@@ -558,9 +529,6 @@ void UIRenderer::drawFavoriteNode(OLEDDisplay *display, OLEDDisplayUiState *stat
             const int iconY = yPos + (FONT_HEIGHT_SMALL - hop_height) / 2;
             display->drawXbm(curX, iconY, hop_width, hop_height, hop);
             curX += hop_width + 1;
-
-            // closing bracket
-            display->drawString(curX, yPos, "]");
         }
     }
 

src/graphics/niche/Drivers/EInk/ED047TC1.cpp

@@ -0,0 +1,122 @@
+/*
+
+    NicheGraphics parallel E-Ink driver for the LilyGo T5-S3-ePaper-Pro (ED047TC1).
+
+    InkHUD buffer format : 1bpp, horizontal bytes, MSB = leftmost pixel, 1 = white
+    FastEPD buffer format: 1bpp, horizontal bytes, MSB = leftmost pixel, 1 = white
+
+    Both formats share the same pixel layout and polarity (1 = white, 0 = black).
+    The InkHUD safe-area buffer (944×523) is copied into the centre of the physical
+    960×540 FastEPD buffer so content clears the panel's inactive edge border.
+    See ED047TC1.h for the H_OFFSET_BYTES / V_OFFSET_TOP / V_OFFSET_BOTTOM constants.
+
+*/
+
+// Ruler diagnostic — uncomment to draw calibration lines at each physical edge.
+// #define EINK_EDGE_LINES
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+#ifdef T5_S3_EPAPER_PRO
+
+#include "./ED047TC1.h"
+
+#include "FastEPD.h"
+#include "configuration.h"
+
+using namespace NicheGraphics::Drivers;
+
+void ED047TC1::begin(SPIClass *spi, uint8_t pin_dc, uint8_t pin_cs, uint8_t pin_busy, uint8_t pin_rst)
+{
+    // Parallel display — SPI parameters are not used
+    (void)spi;
+    (void)pin_dc;
+    (void)pin_cs;
+    (void)pin_busy;
+    (void)pin_rst;
+
+    epaper = new FASTEPD;
+
+#if defined(T5_S3_EPAPER_PRO_V1)
+    epaper->initPanel(BB_PANEL_LILYGO_T5PRO, 28000000);
+#elif defined(T5_S3_EPAPER_PRO_V2)
+    epaper->initPanel(BB_PANEL_LILYGO_T5PRO_V2, 28000000);
+    // Initialize all PCA9535 port-0 pins as outputs / HIGH
+    for (int i = 0; i < 8; i++) {
+        epaper->ioPinMode(i, OUTPUT);
+        epaper->ioWrite(i, HIGH);
+    }
+#else
+#error "ED047TC1 driver: unsupported variant — define T5_S3_EPAPER_PRO_V1 or T5_S3_EPAPER_PRO_V2"
+#endif
+
+    epaper->setMode(BB_MODE_1BPP);
+    epaper->clearWhite();
+    epaper->fullUpdate(true); // Blocking initial clear
+}
+
+void ED047TC1::update(uint8_t *imageData, UpdateTypes type)
+{
+    if (!epaper)
+        return;
+
+    // InkHUD renders into a DISPLAY_WIDTH × DISPLAY_HEIGHT safe-area buffer.
+    // We need to place that into the centre of the physical 960×540 FastEPD buffer,
+    // leaving blank margins at every edge to avoid the panel's inactive border.
+    const uint32_t srcRowBytes = (DISPLAY_WIDTH + 7) / 8; // bytes per row in InkHUD buffer (118)
+    const uint32_t dstRowBytes = (960 + 7) / 8;           // bytes per row in physical buffer (120)
+    const uint32_t dstTotalRows = 540;
+
+    uint8_t *cur = epaper->currentBuffer();
+
+    // Fill physical buffer with white (0xFF = white in FastEPD 1bpp)
+    memset(cur, 0xFF, dstRowBytes * dstTotalRows);
+
+    // Copy each InkHUD row into the physical buffer with horizontal + vertical offsets
+    for (uint32_t row = 0; row < DISPLAY_HEIGHT; row++) {
+        const uint8_t *srcRow = imageData + row * srcRowBytes;
+        uint8_t *dstRow = cur + (row + V_OFFSET_TOP) * dstRowBytes + H_OFFSET_BYTES;
+        memcpy(dstRow, srcRow, srcRowBytes);
+    }
+
+#ifdef EINK_EDGE_LINES
+    // Draw a 1px black box at the exact boundary of the safe area within the
+    // physical buffer. If the margins are correct, all 4 lines should be
+    // fully visible and right at the edge of the usable display area.
+
+    auto setPixelBlack = [&](uint32_t col, uint32_t row) { cur[row * dstRowBytes + col / 8] &= ~(0x80 >> (col % 8)); };
+
+    const uint32_t safeX = H_OFFSET_BYTES * 8;
+    const uint32_t safeY = V_OFFSET_TOP;
+    const uint32_t safeW = DISPLAY_WIDTH;
+    const uint32_t safeH = DISPLAY_HEIGHT;
+
+    // Top edge: horizontal line at safeY
+    for (uint32_t col = safeX; col < safeX + safeW; col++)
+        setPixelBlack(col, safeY);
+
+    // Bottom edge: horizontal line at safeY + safeH - 1
+    for (uint32_t col = safeX; col < safeX + safeW; col++)
+        setPixelBlack(col, safeY + safeH - 1);
+
+    // Left edge: vertical line at safeX
+    for (uint32_t row = safeY; row < safeY + safeH; row++)
+        setPixelBlack(safeX, row);
+
+    // Right edge: vertical line at safeX + safeW - 1
+    for (uint32_t row = safeY; row < safeY + safeH; row++)
+        setPixelBlack(safeX + safeW - 1, row);
+#endif
+
+    if (type == FULL) {
+        epaper->fullUpdate(CLEAR_SLOW, false);
+        epaper->backupPlane(); // Sync pPrevious so next partialUpdate has a correct baseline
+    } else {
+        // FAST: true partial update — compares pCurrent vs pPrevious and only applies
+        // the update waveform to rows that actually changed. Unchanged rows get a neutral
+        // signal (no visible effect). partialUpdate() updates pPrevious internally.
+        epaper->partialUpdate(false, 0, dstTotalRows - 1);
+    }
+}
+
+#endif // T5_S3_EPAPER_PRO
+#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS

src/graphics/niche/Drivers/EInk/ED047TC1.h

@@ -0,0 +1,90 @@
+/*
+
+    E-Ink display driver adapter
+        - ED047TC1 (via FastEPD library)
+        - Manufacturer: E Ink / used in LilyGo T5-E-Paper-S3-Pro
+        - Size: 4.7 inch
+        - Physical resolution: 960px x 540px
+        - Interface: 8-bit parallel (NOT SPI)
+
+    Unlike the other NicheGraphics EInk drivers, this one drives a parallel e-paper
+    panel via the FastEPD library. SPI parameters passed to begin() are ignored.
+
+    The ED047TC1 panel has an inactive pixel border on all four edges (~4–8 physical
+    pixels). DISPLAY_WIDTH / DISPLAY_HEIGHT expose a reduced "safe area" to InkHUD so
+    that content is never drawn into this dead zone. The update() method copies the
+    InkHUD frame buffer into the centre of the larger physical 960×540 buffer, using
+    H_OFFSET_BYTES (horizontal, whole bytes = 8 pixels per byte),
+    V_OFFSET_TOP and V_OFFSET_BOTTOM (vertical, pixel rows) to position it.
+
+    Changing these constants shifts content inward from each physical edge:
+        H_OFFSET_BYTES = 1  →  8px left margin, 8px right margin   (960 – 8 – 8   = 944)
+        V_OFFSET_TOP   = 9  →  9px top margin  (asymmetric: top ≠ bottom)
+        V_OFFSET_BOTTOM = 8 →  8px bottom margin                    (540 – 9 – 8   = 523)
+
+*/
+
+#pragma once
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+#include "configuration.h"
+
+#include "./EInk.h"
+
+// Forward declare to avoid pulling FastEPD into all translation units
+class FASTEPD;
+
+namespace NicheGraphics::Drivers
+{
+
+class ED047TC1 : public EInk
+{
+    // Safe-area dimensions exposed to InkHUD (physical panel is 960×540).
+    //
+    // The ED047TC1 has an inactive pixel border on all physical edges.
+    // The physical buffer coordinates do NOT directly match the visual orientation
+    // due to FastEPD's portrait scan direction and InkHUD's rotation=3 (270° CW):
+    //
+    //   Physical buffer          Visual on device (rotation=3)
+    //   ─────────────────        ──────────────────────────────
+    //   Physical LEFT  cols  →   Visual TOP    edge
+    //   Physical RIGHT cols  →   Visual BOTTOM edge
+    //   Physical TOP   rows  →   Visual RIGHT  edge
+    //   Physical BOTTOM rows →   Visual LEFT   edge
+    //
+    // Offset constants shift the InkHUD safe-area away from each physical dead zone:
+    //   H_OFFSET_BYTES : whole bytes from physical left  (8px per byte, affects visual TOP)
+    //   Physical right margin = 960 − H_OFFSET_BYTES×8 − DISPLAY_WIDTH  (affects visual BOTTOM)
+    //   V_OFFSET_TOP   : pixel rows from physical top    (affects visual RIGHT)
+    //   V_OFFSET_BOTTOM: pixel rows from physical bottom (affects visual LEFT)
+    //
+    // Calibrated by flashing a 1px border box and adjusting until all 4 sides are visible.
+
+    static constexpr uint16_t DISPLAY_WIDTH = 944;  // 960 − H_OFFSET_BYTES×8 − right_margin (8+8 = 16px)
+    static constexpr uint16_t DISPLAY_HEIGHT = 523; // 540 − V_OFFSET_TOP − V_OFFSET_BOTTOM (9+8 = 17px)
+
+    static constexpr uint8_t H_OFFSET_BYTES = 1;  // visual TOP  : 8px physical left margin
+                                                  // visual BOTTOM: 960−8−944=8px physical right margin
+    static constexpr uint8_t V_OFFSET_TOP = 9;    // visual RIGHT : CONFIRMED OK
+    static constexpr uint8_t V_OFFSET_BOTTOM = 8; // visual LEFT  : 8px physical bottom margin
+
+    static constexpr UpdateTypes supported = static_cast<UpdateTypes>(FULL | FAST);
+
+  public:
+    ED047TC1() : EInk(DISPLAY_WIDTH, DISPLAY_HEIGHT, supported) {}
+
+    // EInk interface — SPI params are not used for this parallel display
+    void begin(SPIClass *spi, uint8_t pin_dc, uint8_t pin_cs, uint8_t pin_busy, uint8_t pin_rst = 0xFF) override;
+    void update(uint8_t *imageData, UpdateTypes type) override;
+
+  protected:
+    bool isUpdateDone() override { return true; } // FastEPD updates are blocking
+
+  private:
+    FASTEPD *epaper = nullptr;
+};
+
+} // namespace NicheGraphics::Drivers
+
+#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS

src/graphics/niche/InkHUD/AppletFont.h

@@ -88,8 +88,12 @@ class AppletFont
 
 // Greek
 #include "graphics/niche/Fonts/FreeSans12pt_Win1253.h"
+#include "graphics/niche/Fonts/FreeSans18pt_Win1253.h"
+#include "graphics/niche/Fonts/FreeSans24pt_Win1253.h"
 #include "graphics/niche/Fonts/FreeSans6pt_Win1253.h"
 #include "graphics/niche/Fonts/FreeSans9pt_Win1253.h"
+#define FREESANS_24PT_WIN1253 InkHUD::AppletFont(FreeSans24pt_Win1253, InkHUD::AppletFont::WINDOWS_1253, -5, 3)
+#define FREESANS_18PT_WIN1253 InkHUD::AppletFont(FreeSans18pt_Win1253, InkHUD::AppletFont::WINDOWS_1253, -4, 2)
 #define FREESANS_12PT_WIN1253 InkHUD::AppletFont(FreeSans12pt_Win1253, InkHUD::AppletFont::WINDOWS_1253, -3, 1)
 #define FREESANS_9PT_WIN1253 InkHUD::AppletFont(FreeSans9pt_Win1253, InkHUD::AppletFont::WINDOWS_1253, -2, -1)
 #define FREESANS_6PT_WIN1253 InkHUD::AppletFont(FreeSans6pt_Win1253, InkHUD::AppletFont::WINDOWS_1253, -1, -2)

src/input/ButtonThread.cpp

@@ -143,6 +143,10 @@ int32_t ButtonThread::runOnce()
         leadUpSequenceActive = false;
         resetLeadUpSequence();
     }
+#ifdef INPUT_DEBUG
+    if (buttonCurrentlyPressed)
+        LOG_WARN("Button held for %u ms", millis() - buttonPressStartTime);
+#endif
 
     // Progressive lead-up sound system
     if (!_suppressLeadUp && buttonCurrentlyPressed && (millis() - buttonPressStartTime) >= BUTTON_LEADUP_MS) {
@@ -311,7 +315,8 @@ int32_t ButtonThread::runOnce()
 void ButtonThread::attachButtonInterrupts()
 {
     // Interrupt for user button, during normal use. Improves responsiveness.
-    attachInterrupt(_pinNum, _intRoutine, CHANGE);
+    if (_intRoutine != nullptr)
+        attachInterrupt(_pinNum, _intRoutine, CHANGE);
 }
 
 /*
@@ -320,7 +325,8 @@ void ButtonThread::attachButtonInterrupts()
  */
 void ButtonThread::detachButtonInterrupts()
 {
-    detachInterrupt(_pinNum);
+    if (_intRoutine != nullptr)
+        detachInterrupt(_pinNum);
 }
 
 #ifdef ARCH_ESP32

src/input/TouchScreenImpl1.cpp

@@ -29,7 +29,8 @@ void TouchScreenImpl1::init()
     return;
 #else
     TouchScreenBase::init(true);
-    inputBroker->registerSource(this);
+    if (inputBroker)
+        inputBroker->registerSource(this);
 #endif
 }
 

src/mesh/MeshModule.h

@@ -81,6 +81,7 @@ class MeshModule
     static AdminMessageHandleResult handleAdminMessageForAllModules(const meshtastic_MeshPacket &mp,
                                                                     meshtastic_AdminMessage *request,
                                                                     meshtastic_AdminMessage *response);
+    const char *getName() const { return name; }
 #if HAS_SCREEN
     virtual void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) { return; }
     virtual bool isRequestingFocus();                          // Checked by screen, when regenerating frameset

src/mesh/PhoneAPI.cpp

@@ -470,8 +470,13 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf)
             fromRadioScratch.moduleConfig.which_payload_variant = meshtastic_ModuleConfig_traffic_management_tag;
             fromRadioScratch.moduleConfig.payload_variant.traffic_management = moduleConfig.traffic_management;
             break;
+        case meshtastic_ModuleConfig_tak_tag:
+            LOG_DEBUG("Send module config: tak");
+            fromRadioScratch.moduleConfig.which_payload_variant = meshtastic_ModuleConfig_tak_tag;
+            fromRadioScratch.moduleConfig.payload_variant.tak = moduleConfig.tak;
+            break;
         default:
-            LOG_ERROR("Unknown module config type %d", config_state);
+            LOG_DEBUG("Unhandled module config type %d", config_state);
         }
 
         config_state++;

src/mesh/RadioLibInterface.cpp

@@ -46,6 +46,16 @@ RadioLibInterface::RadioLibInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE c
 #endif
 }
 
+RadioLibInterface::~RadioLibInterface()
+{
+    // If the static `instance` pointer still references us, clear it.
+    // A later successful init() may have replaced `instance` with a newer
+    // interface — don't clobber that case.
+    if (instance == this) {
+        instance = nullptr;
+    }
+}
+
 #ifdef ARCH_ESP32
 // ESP32 doesn't use that flag
 #define YIELD_FROM_ISR(x) portYIELD_FROM_ISR()

src/mesh/RadioLibInterface.h

@@ -136,6 +136,13 @@ class RadioLibInterface : public RadioInterface, protected concurrency::Notified
     RadioLibInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
                       RADIOLIB_PIN_TYPE busy, PhysicalLayer *iface = NULL);
 
+    /**
+     * Clear the static `instance` pointer if it still points at us, so callers
+     * that check `RadioLibInterface::instance != nullptr` don't dereference a
+     * freed object after a failed init() + unique_ptr reset.
+     */
+    virtual ~RadioLibInterface();
+
     virtual ErrorCode send(meshtastic_MeshPacket *p) override;
 
     /**

src/mesh/Router.cpp

@@ -499,9 +499,9 @@ DecodeState perhapsDecode(meshtastic_MeshPacket *p)
                 meshtastic_Data decodedtmp;
                 memset(&decodedtmp, 0, sizeof(decodedtmp));
                 if (!pb_decode_from_bytes(bytes, rawSize, &meshtastic_Data_msg, &decodedtmp)) {
-                    LOG_ERROR("Invalid protobufs in received mesh packet id=0x%08x (bad psk?)!", p->id);
+                    LOG_DEBUG("Invalid protobufs in received mesh packet id=0x%08x (bad psk?)", p->id);
                 } else if (decodedtmp.portnum == meshtastic_PortNum_UNKNOWN_APP) {
-                    LOG_ERROR("Invalid portnum (bad psk?)!");
+                    LOG_DEBUG("Invalid portnum (bad psk?)");
 #if !(MESHTASTIC_EXCLUDE_PKI)
                 } else if (!owner.is_licensed && isToUs(p) && decodedtmp.portnum == meshtastic_PortNum_TEXT_MESSAGE_APP) {
                     LOG_WARN("Rejecting legacy DM");

src/mesh/SX126xInterface.cpp

@@ -455,6 +455,15 @@ template <typename T> void SX126xInterface<T>::resetAGC()
     // RX boosted gain mode
     lora.setRxBoostedGainMode(config.lora.sx126x_rx_boosted_gain);
 
+    // Re-apply the undocumented 0x8B5 RX sensitivity patch that was set in init().
+    // The CALIBRATE_ALL (0x7F) command above clears bit 0 of register 0x8B5, which
+    // silently removes the RX sensitivity improvement introduced in #9571 / #9777.
+    // Without this re-apply, every SX1262 node loses its RX boost ~60s after boot
+    // and never recovers until reboot. See empirical evidence in the PR description.
+    if (module.SPIsetRegValue(0x8B5, 0x01, 0, 0) != RADIOLIB_ERR_NONE) {
+        LOG_WARN("SX126x resetAGC: failed to re-apply 0x8B5 RX sensitivity patch");
+    }
+
     // 6. Resume receiving
     startReceive();
 }

src/mesh/TypeConversions.cpp

@@ -81,7 +81,9 @@ meshtastic_UserLite TypeConversions::ConvertToUserLite(meshtastic_User user)
     meshtastic_UserLite lite = meshtastic_UserLite_init_default;
 
     strncpy(lite.long_name, user.long_name, sizeof(lite.long_name));
+    lite.long_name[sizeof(lite.long_name) - 1] = '\0';
     strncpy(lite.short_name, user.short_name, sizeof(lite.short_name));
+    lite.short_name[sizeof(lite.short_name) - 1] = '\0';
     lite.hw_model = user.hw_model;
     lite.role = user.role;
     lite.is_licensed = user.is_licensed;
@@ -99,7 +101,9 @@ meshtastic_User TypeConversions::ConvertToUser(uint32_t nodeNum, meshtastic_User
 
     snprintf(user.id, sizeof(user.id), "!%08x", nodeNum);
     strncpy(user.long_name, lite.long_name, sizeof(user.long_name));
+    user.long_name[sizeof(user.long_name) - 1] = '\0';
     strncpy(user.short_name, lite.short_name, sizeof(user.short_name));
+    user.short_name[sizeof(user.short_name) - 1] = '\0';
     user.hw_model = lite.hw_model;
     user.role = lite.role;
     user.is_licensed = lite.is_licensed;

src/mesh/generated/meshtastic/config.pb.h

@@ -285,7 +285,11 @@ typedef enum _meshtastic_Config_LoRaConfig_RegionCode {
     /* Nepal 865MHz */
     meshtastic_Config_LoRaConfig_RegionCode_NP_865 = 25,
     /* Brazil 902MHz */
-    meshtastic_Config_LoRaConfig_RegionCode_BR_902 = 26
+    meshtastic_Config_LoRaConfig_RegionCode_BR_902 = 26,
+    /* ITU Region 1 Amateur Radio 2m band (144-146 MHz) */
+    meshtastic_Config_LoRaConfig_RegionCode_ITU1_2M = 27,
+    /* ITU Region 2 / 3 Amateur Radio 2m band (144-148 MHz) */
+    meshtastic_Config_LoRaConfig_RegionCode_ITU23_2M = 28
 } meshtastic_Config_LoRaConfig_RegionCode;
 
 /* Standard predefined channel settings
@@ -702,8 +706,8 @@ extern "C" {
 #define _meshtastic_Config_DisplayConfig_CompassOrientation_ARRAYSIZE ((meshtastic_Config_DisplayConfig_CompassOrientation)(meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270_INVERTED+1))
 
 #define _meshtastic_Config_LoRaConfig_RegionCode_MIN meshtastic_Config_LoRaConfig_RegionCode_UNSET
-#define _meshtastic_Config_LoRaConfig_RegionCode_MAX meshtastic_Config_LoRaConfig_RegionCode_BR_902
-#define _meshtastic_Config_LoRaConfig_RegionCode_ARRAYSIZE ((meshtastic_Config_LoRaConfig_RegionCode)(meshtastic_Config_LoRaConfig_RegionCode_BR_902+1))
+#define _meshtastic_Config_LoRaConfig_RegionCode_MAX meshtastic_Config_LoRaConfig_RegionCode_ITU23_2M
+#define _meshtastic_Config_LoRaConfig_RegionCode_ARRAYSIZE ((meshtastic_Config_LoRaConfig_RegionCode)(meshtastic_Config_LoRaConfig_RegionCode_ITU23_2M+1))
 
 #define _meshtastic_Config_LoRaConfig_ModemPreset_MIN meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST
 #define _meshtastic_Config_LoRaConfig_ModemPreset_MAX meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO

src/mesh/generated/meshtastic/module_config.pb.h

@@ -398,6 +398,8 @@ typedef struct _meshtastic_ModuleConfig_TelemetryConfig {
     bool device_telemetry_enabled;
     /* Enable/Disable the air quality telemetry measurement module on-device display */
     bool air_quality_screen_enabled;
+    /* Temperature offset in Celsius applied to local environment telemetry before it is sent. */
+    float environment_temperature_offset_c;
 } meshtastic_ModuleConfig_TelemetryConfig;
 
 /* Canned Messages Module Config */
@@ -593,7 +595,7 @@ extern "C" {
 #define meshtastic_ModuleConfig_ExternalNotificationConfig_init_default {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define meshtastic_ModuleConfig_StoreForwardConfig_init_default {0, 0, 0, 0, 0, 0}
 #define meshtastic_ModuleConfig_RangeTestConfig_init_default {0, 0, 0, 0}
-#define meshtastic_ModuleConfig_TelemetryConfig_init_default {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+#define meshtastic_ModuleConfig_TelemetryConfig_init_default {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define meshtastic_ModuleConfig_CannedMessageConfig_init_default {0, 0, 0, 0, _meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_MIN, _meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_MIN, _meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_MIN, 0, 0, "", 0}
 #define meshtastic_ModuleConfig_AmbientLightingConfig_init_default {0, 0, 0, 0, 0}
 #define meshtastic_ModuleConfig_StatusMessageConfig_init_default {""}
@@ -612,7 +614,7 @@ extern "C" {
 #define meshtastic_ModuleConfig_ExternalNotificationConfig_init_zero {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define meshtastic_ModuleConfig_StoreForwardConfig_init_zero {0, 0, 0, 0, 0, 0}
 #define meshtastic_ModuleConfig_RangeTestConfig_init_zero {0, 0, 0, 0}
-#define meshtastic_ModuleConfig_TelemetryConfig_init_zero {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+#define meshtastic_ModuleConfig_TelemetryConfig_init_zero {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define meshtastic_ModuleConfig_CannedMessageConfig_init_zero {0, 0, 0, 0, _meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_MIN, _meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_MIN, _meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_MIN, 0, 0, "", 0}
 #define meshtastic_ModuleConfig_AmbientLightingConfig_init_zero {0, 0, 0, 0, 0}
 #define meshtastic_ModuleConfig_StatusMessageConfig_init_zero {""}
@@ -718,6 +720,7 @@ extern "C" {
 #define meshtastic_ModuleConfig_TelemetryConfig_health_screen_enabled_tag 13
 #define meshtastic_ModuleConfig_TelemetryConfig_device_telemetry_enabled_tag 14
 #define meshtastic_ModuleConfig_TelemetryConfig_air_quality_screen_enabled_tag 15
+#define meshtastic_ModuleConfig_TelemetryConfig_environment_temperature_offset_c_tag 16
 #define meshtastic_ModuleConfig_CannedMessageConfig_rotary1_enabled_tag 1
 #define meshtastic_ModuleConfig_CannedMessageConfig_inputbroker_pin_a_tag 2
 #define meshtastic_ModuleConfig_CannedMessageConfig_inputbroker_pin_b_tag 3
@@ -948,7 +951,8 @@ X(a, STATIC,   SINGULAR, BOOL,     health_measurement_enabled,  11) \
 X(a, STATIC,   SINGULAR, UINT32,   health_update_interval,  12) \
 X(a, STATIC,   SINGULAR, BOOL,     health_screen_enabled,  13) \
 X(a, STATIC,   SINGULAR, BOOL,     device_telemetry_enabled,  14) \
-X(a, STATIC,   SINGULAR, BOOL,     air_quality_screen_enabled,  15)
+X(a, STATIC,   SINGULAR, BOOL,     air_quality_screen_enabled,  15) \
+X(a, STATIC,   SINGULAR, FLOAT,    environment_temperature_offset_c,  16)
 #define meshtastic_ModuleConfig_TelemetryConfig_CALLBACK NULL
 #define meshtastic_ModuleConfig_TelemetryConfig_DEFAULT NULL
 
@@ -1051,8 +1055,8 @@ extern const pb_msgdesc_t meshtastic_RemoteHardwarePin_msg;
 #define meshtastic_ModuleConfig_SerialConfig_size 28
 #define meshtastic_ModuleConfig_StatusMessageConfig_size 81
 #define meshtastic_ModuleConfig_StoreForwardConfig_size 24
+#define meshtastic_ModuleConfig_TelemetryConfig_size 55
 #define meshtastic_ModuleConfig_TAKConfig_size   4
-#define meshtastic_ModuleConfig_TelemetryConfig_size 50
 #define meshtastic_ModuleConfig_TrafficManagementConfig_size 52
 #define meshtastic_ModuleConfig_size             227
 #define meshtastic_RemoteHardwarePin_size        21

src/modules/AdminModule.cpp

@@ -1519,8 +1519,15 @@ void AdminModule::handleSendInputEvent(const meshtastic_AdminMessage_InputEvent
     LOG_DEBUG("Processing input event: event_code=%u, kb_char=%u, touch_x=%u, touch_y=%u", inputEvent.event_code,
               inputEvent.kb_char, inputEvent.touch_x, inputEvent.touch_y);
 
-    // Create InputEvent for injection
-    InputEvent event = {.inputEvent = (input_broker_event)inputEvent.event_code,
+    // Create InputEvent for injection.
+    //
+    // `.source` MUST be a non-null C string: the LOG_INFO below formats it
+    // with %s, and passing NULL to the esp-log formatter crashes with
+    // Guru Meditation LoadProhibited at strlen(NULL). Other InputBroker
+    // sources (buttons, rotary) always set this; the admin path was the
+    // only one leaving it default-null.
+    InputEvent event = {.source = "admin",
+                        .inputEvent = (input_broker_event)inputEvent.event_code,
                         .kbchar = (unsigned char)inputEvent.kb_char,
                         .touchX = inputEvent.touch_x,
                         .touchY = inputEvent.touch_y};

src/modules/StoreForwardModule.cpp

@@ -206,7 +206,7 @@ void StoreForwardModule::historyAdd(const meshtastic_MeshPacket &mp)
     this->packetHistory[this->packetHistoryTotalCount].hop_limit = mp.hop_limit;
     this->packetHistory[this->packetHistoryTotalCount].via_mqtt = mp.via_mqtt;
     this->packetHistory[this->packetHistoryTotalCount].transport_mechanism = mp.transport_mechanism;
-    memcpy(this->packetHistory[this->packetHistoryTotalCount].payload, p.payload.bytes, meshtastic_Constants_DATA_PAYLOAD_LEN);
+    memcpy(this->packetHistory[this->packetHistoryTotalCount].payload, p.payload.bytes, p.payload.size);
 
     this->packetHistoryTotalCount++;
 }

src/modules/Telemetry/EnvironmentTelemetry.cpp

@@ -138,6 +138,32 @@ extern void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const c
 #include "graphics/ScreenFonts.h"
 #include <Throttle.h>
 
+namespace
+{
+constexpr float TEMPERATURE_OFFSET_MIN_C = -20.0f;
+constexpr float TEMPERATURE_OFFSET_MAX_C = 20.0f;
+
+float clampTemperatureOffsetC(float offsetC)
+{
+    if (offsetC < TEMPERATURE_OFFSET_MIN_C)
+        return TEMPERATURE_OFFSET_MIN_C;
+    if (offsetC > TEMPERATURE_OFFSET_MAX_C)
+        return TEMPERATURE_OFFSET_MAX_C;
+    return offsetC;
+}
+
+void applyTemperatureOffset(meshtastic_EnvironmentMetrics *metrics)
+{
+    const float offsetC = clampTemperatureOffsetC(moduleConfig.telemetry.environment_temperature_offset_c);
+    if (offsetC == 0.0f)
+        return;
+
+    if (metrics->has_temperature)
+        metrics->temperature += offsetC;
+    if (metrics->has_soil_temperature)
+        metrics->soil_temperature += offsetC;
+}
+} // namespace
 static constexpr uint16_t TX_HISTORY_KEY_ENVIRONMENT_TELEMETRY = 0x8002;
 
 void EnvironmentTelemetryModule::i2cScanFinished(ScanI2C *i2cScanner)
@@ -261,6 +287,29 @@ int32_t EnvironmentTelemetryModule::runOnce()
         return disable();
     }
 
+    auto refreshLocalMeasurementPacket = [this]() {
+        // Keep displaying remote telemetry once we have it.
+        if (lastMeasurementPacket != nullptr && lastMeasurementPacket->from != nodeDB->getNodeNum()) {
+            return;
+        }
+
+        meshtastic_Telemetry local = meshtastic_Telemetry_init_zero;
+        if (!getEnvironmentTelemetry(&local)) {
+            return;
+        }
+
+        meshtastic_MeshPacket *localPacket = allocDataProtobuf(local);
+        if (localPacket == nullptr) {
+            return;
+        }
+
+        if (lastMeasurementPacket != nullptr) {
+            packetPool.release(lastMeasurementPacket);
+        }
+        lastMeasurementPacket = packetPool.allocCopy(*localPacket);
+        packetPool.release(localPacket);
+    };
+
     if (firstTime) {
         // This is the first time the OSThread library has called this function, so do some setup
         firstTime = 0;
@@ -290,6 +339,7 @@ int32_t EnvironmentTelemetryModule::runOnce()
                 result = rak9154Sensor.runOnce();
 #endif
 #endif
+            refreshLocalMeasurementPacket();
         }
         // it's possible to have this module enabled, only for displaying values on the screen.
         // therefore, we should only enable the sensor loop if measurement is also enabled
@@ -306,6 +356,7 @@ int32_t EnvironmentTelemetryModule::runOnce()
                 result = delay;
             }
         }
+        refreshLocalMeasurementPacket();
 
         uint32_t lastTelemetry =
             transmitHistory ? transmitHistory->getLastSentToMeshMillis(TX_HISTORY_KEY_ENVIRONMENT_TELEMETRY) : 0;
@@ -566,6 +617,9 @@ bool EnvironmentTelemetryModule::getEnvironmentTelemetry(meshtastic_Telemetry *m
         hasSensor = true;
     }
 #endif
+    if (valid)
+        applyTemperatureOffset(&m->variant.environment_metrics);
+
     return valid && hasSensor;
 }
 
@@ -630,11 +684,15 @@ bool EnvironmentTelemetryModule::sendTelemetry(NodeNum dest, bool phoneOnly)
             p->priority = meshtastic_MeshPacket_Priority_RELIABLE;
         else
             p->priority = meshtastic_MeshPacket_Priority_BACKGROUND;
-        // release previous packet before occupying a new spot
-        if (lastMeasurementPacket != nullptr)
-            packetPool.release(lastMeasurementPacket);
+        const bool shouldReplaceDisplayPacket =
+            (lastMeasurementPacket == nullptr || lastMeasurementPacket->from == nodeDB->getNodeNum());
+        if (shouldReplaceDisplayPacket) {
+            // release previous packet before occupying a new spot
+            if (lastMeasurementPacket != nullptr)
+                packetPool.release(lastMeasurementPacket);
 
-        lastMeasurementPacket = packetPool.allocCopy(*p);
+            lastMeasurementPacket = packetPool.allocCopy(*p);
+        }
         if (phoneOnly) {
             LOG_INFO("Send packet to phone");
             service->sendToPhone(p);

src/nimble/NimbleBluetooth.cpp

@@ -323,7 +323,7 @@ class BluetoothPhoneAPI : public PhoneAPI, public concurrency::OSThread
     /**
      * Subclasses can use this as a hook to provide custom notifications for their transport (i.e. bluetooth notifies)
      */
-    virtual void onNowHasData(uint32_t fromRadioNum)
+    virtual void onNowHasData(uint32_t fromRadioNum) override
     {
         PhoneAPI::onNowHasData(fromRadioNum);
 
@@ -350,7 +350,7 @@ class BluetoothPhoneAPI : public PhoneAPI, public concurrency::OSThread
     }
 
     /// Check the current underlying physical link to see if the client is currently connected
-    virtual bool checkIsConnected() { return bleServer && bleServer->getConnectedCount() > 0; }
+    virtual bool checkIsConnected() override { return bleServer && bleServer->getConnectedCount() > 0; }
 
     void requestHighThroughputConnection(uint16_t conn_handle)
     {
@@ -412,9 +412,9 @@ static uint8_t lastToRadio[MAX_TO_FROM_RADIO_SIZE];
 class NimbleBluetoothToRadioCallback : public NimBLECharacteristicCallbacks
 {
 #ifdef NIMBLE_TWO
-    virtual void onWrite(NimBLECharacteristic *pCharacteristic, NimBLEConnInfo &connInfo)
+    virtual void onWrite(NimBLECharacteristic *pCharacteristic, NimBLEConnInfo &connInfo) override
 #else
-    virtual void onWrite(NimBLECharacteristic *pCharacteristic)
+    virtual void onWrite(NimBLECharacteristic *pCharacteristic) override
 
 #endif
     {
@@ -464,9 +464,9 @@ class NimbleBluetoothToRadioCallback : public NimBLECharacteristicCallbacks
 class NimbleBluetoothFromRadioCallback : public NimBLECharacteristicCallbacks
 {
 #ifdef NIMBLE_TWO
-    virtual void onRead(NimBLECharacteristic *pCharacteristic, NimBLEConnInfo &connInfo)
+    virtual void onRead(NimBLECharacteristic *pCharacteristic, NimBLEConnInfo &connInfo) override
 #else
-    virtual void onRead(NimBLECharacteristic *pCharacteristic)
+    virtual void onRead(NimBLECharacteristic *pCharacteristic) override
 #endif
     {
         // CAUTION: This callback runs in the NimBLE task!!! Don't do anything except communicate with the main task's runOnce.
@@ -582,9 +582,9 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
   private:
     NimbleBluetooth *ble;
 
-    virtual uint32_t onPassKeyDisplay()
+    virtual uint32_t onPassKeyDisplay() override
 #else
-    virtual uint32_t onPassKeyRequest()
+    virtual uint32_t onPassKeyRequest() override
 #endif
     {
         uint32_t passkey = config.bluetooth.fixed_pin;
@@ -635,9 +635,9 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
     }
 
 #ifdef NIMBLE_TWO
-    virtual void onAuthenticationComplete(NimBLEConnInfo &connInfo)
+    virtual void onAuthenticationComplete(NimBLEConnInfo &connInfo) override
 #else
-    virtual void onAuthenticationComplete(ble_gap_conn_desc *desc)
+    virtual void onAuthenticationComplete(ble_gap_conn_desc *desc) override
 #endif
     {
         LOG_INFO("BLE authentication complete");
@@ -655,7 +655,7 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
     }
 
 #ifdef NIMBLE_TWO
-    virtual void onConnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo)
+    virtual void onConnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo) override
     {
         LOG_INFO("BLE incoming connection %s", connInfo.getAddress().toString().c_str());
 
@@ -683,11 +683,11 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
 #endif
 
 #ifdef NIMBLE_TWO
-    virtual void onDisconnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo, int reason)
+    virtual void onDisconnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo, int reason) override
     {
         LOG_INFO("BLE disconnect reason: %d", reason);
 #else
-    virtual void onDisconnect(NimBLEServer *pServer, ble_gap_conn_desc *desc)
+    virtual void onDisconnect(NimBLEServer *pServer, ble_gap_conn_desc *desc) override
     {
         LOG_INFO("BLE disconnect");
 #endif
@@ -989,11 +989,4 @@ void NimbleBluetooth::sendLog(const uint8_t *logMessage, size_t length)
 #endif
 }
 
-void clearNVS()
-{
-    NimBLEDevice::deleteAllBonds();
-#ifdef ARCH_ESP32
-    ESP.restart();
-#endif
-}
 #endif

src/nimble/NimbleBluetooth.h

@@ -24,5 +24,4 @@ class NimbleBluetooth : BluetoothApi
 #endif
 };
 
-void setBluetoothEnable(bool enable);
-void clearNVS();
+void setBluetoothEnable(bool enable);

src/platform/extra_variants/m5stack_cardputer_adv/variant.cpp

@@ -1,6 +1,9 @@
-#include "AudioBoard.h"
 #include "configuration.h"
 
+#ifdef M5STACK_CARDPUTER_ADV
+
+#include "AudioBoard.h"
+
 DriverPins PinsAudioBoardES8311;
 AudioBoard board(AudioDriverES8311, PinsAudioBoardES8311);
 
@@ -38,3 +41,5 @@ void lateInitVariant()
     es8311_write_reg(0x32, 0xBF); // DAC volume (0dB)
     es8311_write_reg(0x37, 0x08); // EQ bypass
 }
+
+#endif

src/platform/extra_variants/t5s3_epaper/variant.cpp

@@ -0,0 +1,144 @@
+#include "configuration.h"
+
+#ifdef T5_S3_EPAPER_PRO
+
+#include "Observer.h"
+#include "TouchDrvGT911.hpp"
+#include "Wire.h"
+#include "input/InputBroker.h"
+#include "input/TouchScreenImpl1.h"
+#include "sleep.h"
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+#include "graphics/niche/InkHUD/InkHUD.h"
+#include "graphics/niche/InkHUD/SystemApplet.h"
+
+// Bridges touch events from TouchScreenImpl1 directly into InkHUD,
+// bypassing the InputBroker (which is excluded in InkHUD builds).
+// Routing mirrors the mini-epaper-s3 two-way rocker pattern:
+//   - Nav left/right: prevApplet/nextApplet when idle, navUp/Down when a system applet has focus (e.g. menu)
+//   - Nav up/down:    navUp/navDown always (menu scroll)
+//   - Tap:            shortpress (cycle applets / confirm in menu)
+//   - Long press:     longpress (open menu / back)
+class TouchInkHUDBridge : public Observer<const InputEvent *>
+{
+    int onNotify(const InputEvent *e) override
+    {
+        auto *inkhud = NicheGraphics::InkHUD::InkHUD::getInstance();
+
+        // Keep alignment in sync with the current rotation so that visual-frame gestures
+        // always pass through nav functions without remapping: (rotation + alignment) % 4 == 0.
+        inkhud->persistence->settings.joystick.alignment = (4 - inkhud->persistence->settings.rotation) % 4;
+
+        // Check whether a system applet (e.g. menu) is currently handling input
+        bool systemHandlingInput = false;
+        for (NicheGraphics::InkHUD::SystemApplet *sa : inkhud->systemApplets) {
+            if (sa->handleInput) {
+                systemHandlingInput = true;
+                break;
+            }
+        }
+
+        switch (e->inputEvent) {
+        case INPUT_BROKER_USER_PRESS:
+            inkhud->shortpress();
+            break;
+        case INPUT_BROKER_SELECT:
+            inkhud->longpress();
+            break;
+        case INPUT_BROKER_LEFT:
+            if (systemHandlingInput)
+                inkhud->navUp();
+            else
+                inkhud->prevApplet();
+            break;
+        case INPUT_BROKER_RIGHT:
+            if (systemHandlingInput)
+                inkhud->navDown();
+            else
+                inkhud->nextApplet();
+            break;
+        case INPUT_BROKER_UP:
+            inkhud->navUp();
+            break;
+        case INPUT_BROKER_DOWN:
+            inkhud->navDown();
+            break;
+        default:
+            break;
+        }
+        return 0;
+    }
+};
+
+static TouchInkHUDBridge touchBridge;
+#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+TouchDrvGT911 touch;
+
+// Commands the GT911 into standby before the Wire bus is torn down.
+// notifyDeepSleep fires before Wire.end() in doDeepSleep(), so I2C is still available here.
+struct TouchDeepSleepObserver {
+    int onDeepSleep(void *)
+    {
+        touch.sleep();
+        return 0;
+    }
+    CallbackObserver<TouchDeepSleepObserver, void *> observer{this, &TouchDeepSleepObserver::onDeepSleep};
+} static touchDeepSleepObserver;
+
+bool readTouch(int16_t *x, int16_t *y)
+{
+    if (!digitalRead(GT911_PIN_INT)) {
+        int16_t raw_x;
+        int16_t raw_y;
+        if (touch.getPoint(&raw_x, &raw_y)) {
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+            // Transform raw GT911 axes to visual-frame coordinates for the current display rotation.
+            // rotation=3 is the physical identity (device's default orientation).
+            switch (NicheGraphics::InkHUD::InkHUD::getInstance()->persistence->settings.rotation) {
+            default:
+            case 3:
+                *x = raw_x;
+                *y = raw_y;
+                break; // identity
+            case 2:
+                *x = (EPD_WIDTH - 1) - raw_y;
+                *y = raw_x;
+                break; // 90° CW tilt
+            case 1:
+                *x = (EPD_HEIGHT - 1) - raw_x;
+                *y = (EPD_WIDTH - 1) - raw_y;
+                break; // 180° flip
+            case 0:
+                *x = raw_y;
+                *y = (EPD_HEIGHT - 1) - raw_x;
+                break; // 90° CCW tilt
+            }
+#else
+            *x = raw_x;
+            *y = raw_y;
+#endif
+            LOG_DEBUG("touched(%d/%d)", *x, *y);
+            return true;
+        }
+    }
+    return false;
+}
+
+// T5-S3-ePaper Pro specific (late-) init
+void lateInitVariant(void)
+{
+    touch.setPins(GT911_PIN_RST, GT911_PIN_INT);
+    if (touch.begin(Wire, GT911_SLAVE_ADDRESS_H, GT911_PIN_SDA, GT911_PIN_SCL)) {
+        touchDeepSleepObserver.observer.observe(&notifyDeepSleep);
+        touchScreenImpl1 = new TouchScreenImpl1(EPD_WIDTH, EPD_HEIGHT, readTouch);
+        touchScreenImpl1->init();
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+        touchBridge.observe(touchScreenImpl1);
+#endif
+    } else {
+        LOG_ERROR("Failed to find touch controller!");
+    }
+}
+#endif

src/platform/extra_variants/t_deck_pro/variant.cpp

@@ -8,20 +8,127 @@
 
 CSE_CST328 tsPanel = CSE_CST328(EINK_WIDTH, EINK_HEIGHT, &Wire, CST328_PIN_RST, CST328_PIN_INT);
 
+static bool is_cst3530 = false;
+volatile bool touch_isr = false;
+#define CST3530_ADDR 0x1A
+
+bool read_cst3530_touch(int16_t *x, int16_t *y)
+{
+    uint8_t buffer[9] = {0};
+    uint8_t r_cmd[] = {0xD0, 0x07, 0x00, 0x00};
+    uint8_t clear_cmd[] = {0xD0, 0x00, 0x02, 0xAB};
+
+    Wire.beginTransmission(CST3530_ADDR);
+    Wire.write(r_cmd, sizeof(r_cmd));
+    if (Wire.endTransmission() != 0) {
+        LOG_DEBUG("CST3530 I2C send addr failed");
+        return false;
+    }
+
+    int read_len = Wire.requestFrom((int)CST3530_ADDR, sizeof(buffer));
+    if (read_len != sizeof(buffer)) {
+        LOG_DEBUG("CST3530 read len error: %d (expect 9)", read_len);
+        return false;
+    }
+    int actual_read = Wire.readBytes(buffer, sizeof(buffer));
+    if (actual_read != sizeof(buffer)) {
+        LOG_DEBUG("CST3530 read bytes error: %d (expect 9)", actual_read);
+        return false;
+    }
+
+    uint8_t report_typ = buffer[2];
+    if (report_typ != 0xFF) {
+        return false;
+    }
+
+    uint8_t touch_points = buffer[3] & 0x0F;
+    if (touch_points == 0 || touch_points > 1) {
+        LOG_DEBUG("CST3530 touch points invalid: %d", touch_points);
+        return false;
+    }
+
+    *x = buffer[4] + ((uint16_t)(buffer[7] & 0x0F) << 8);
+    *y = buffer[5] + ((uint16_t)(buffer[7] & 0xF0) << 4);
+
+    // LOG_DEBUG("CST3530 touch: num:%d x=%d,y=%d", touch_points, *x, *y);
+
+    Wire.beginTransmission(CST3530_ADDR);
+    Wire.write(clear_cmd, sizeof(clear_cmd));
+    if (Wire.endTransmission() != 0) {
+        LOG_DEBUG("CST3530 clear cmd failed");
+    }
+
+    return true;
+}
+
 bool readTouch(int16_t *x, int16_t *y)
 {
-    if (tsPanel.getTouches()) {
-        *x = tsPanel.getPoint(0).x;
-        *y = tsPanel.getPoint(0).y;
-        return true;
+
+    if (is_cst3530) {
+        if (touch_isr) {
+            touch_isr = false;
+            return read_cst3530_touch(x, y);
+        }
+        return false;
+    } else {
+        if (tsPanel.getTouches()) {
+            *x = tsPanel.getPoint(0).x;
+            *y = tsPanel.getPoint(0).y;
+            return true;
+        }
     }
     return false;
 }
 
+static void IRAM_ATTR touchInterruptHandler()
+{
+    touch_isr = true;
+}
+
 // T-Deck Pro specific init
 void lateInitVariant()
 {
-    tsPanel.begin();
+    // Reset touch
+    pinMode(CST328_PIN_RST, OUTPUT);
+    digitalWrite(CST328_PIN_RST, HIGH);
+    delay(20);
+    digitalWrite(CST328_PIN_RST, LOW);
+    delay(80);
+    digitalWrite(CST328_PIN_RST, HIGH);
+    delay(20);
+
+    int retry = 5;
+    uint8_t buffer[7];
+    uint8_t r_cmd[] = {0x0d0, 0x03, 0x00, 0x00};
+
+    // Probe touch chip
+    while (retry--) {
+        Wire.beginTransmission(CST3530_ADDR);
+        Wire.write(r_cmd, sizeof(r_cmd));
+        if (Wire.endTransmission() == 0) {
+            Wire.requestFrom((int)CST3530_ADDR, 7);
+            Wire.readBytes(buffer, 7);
+            if (buffer[2] == 0xCA && buffer[3] == 0xCA) {
+                LOG_DEBUG("CST3530 detected");
+                is_cst3530 = true;
+
+                // The CST3530 will automatically enter sleep mode;
+                // polling should not be used, but rather an interrupt method should be employed.
+                pinMode(CST328_PIN_INT, INPUT);
+                attachInterrupt(digitalPinToInterrupt(CST328_PIN_INT), touchInterruptHandler, FALLING);
+
+                break;
+            } else {
+                LOG_DEBUG("CST3530 not response ~!");
+            }
+        }
+        uint8_t cmd1[] = {0xD0, 0x00, 0x04, 0x00};
+        Wire.beginTransmission(CST3530_ADDR);
+        Wire.write(cmd1, sizeof(cmd1));
+        Wire.endTransmission();
+        delay(50);
+    }
+
     touchScreenImpl1 = new TouchScreenImpl1(EINK_WIDTH, EINK_HEIGHT, readTouch);
     touchScreenImpl1->init();
 }

src/power.h

@@ -86,7 +86,7 @@ extern RAK9154Sensor rak9154Sensor;
 extern XPowersLibInterface *PMU;
 #endif
 
-class Power : private concurrency::OSThread
+class Power : public concurrency::OSThread
 {
 
   public:
@@ -101,6 +101,14 @@ class Power : private concurrency::OSThread
     void setStatusHandler(meshtastic::PowerStatus *handler) { statusHandler = handler; }
     const uint16_t OCV[11] = {OCV_ARRAY};
 
+#ifdef ARCH_ESP32
+    int beforeLightSleep(void *unused);
+    int afterLightSleep(esp_sleep_wakeup_cause_t cause);
+#endif
+
+    void attachPowerInterrupts();
+    void detachPowerInterrupts();
+
   protected:
     meshtastic::PowerStatus *statusHandler;
 
@@ -125,6 +133,14 @@ class Power : private concurrency::OSThread
     // open circuit voltage lookup table
     uint8_t low_voltage_counter;
     uint32_t lastLogTime = 0;
+
+#ifdef ARCH_ESP32
+    // Get notified when lightsleep begins and ends
+    CallbackObserver<Power, void *> lsObserver = CallbackObserver<Power, void *>(this, &Power::beforeLightSleep);
+    CallbackObserver<Power, esp_sleep_wakeup_cause_t> lsEndObserver =
+        CallbackObserver<Power, esp_sleep_wakeup_cause_t>(this, &Power::afterLightSleep);
+#endif
+
 #ifdef DEBUG_HEAP
     uint32_t lastheap;
 #endif

src/sleep.cpp

@@ -497,13 +497,12 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
     esp_sleep_wakeup_cause_t cause = esp_sleep_get_wakeup_cause();
     notifyLightSleepEnd.notifyObservers(cause); // Button interrupts are reattached here
 
-#ifdef BUTTON_PIN
     if (cause == ESP_SLEEP_WAKEUP_GPIO) {
-        LOG_INFO("Exit light sleep gpio: btn=%d",
-                 !digitalRead(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN));
-    } else
-#endif
-    {
+        LOG_INFO("Exit light sleep gpio");
+        // If we woke because of a GPIO, it's possible power needs to run to handle.
+        power->setIntervalFromNow(0);
+        runASAP = true;
+    } else {
         LOG_INFO("Exit light sleep cause: %d", cause);
     }
 

test/README.md

@@ -0,0 +1,322 @@
+# Native Unit Tests — Authoring Guide
+
+This directory contains C++ unit tests that run on the host machine via PlatformIO's native environment. Tests use the [Unity](http://www.throwtheswitch.org/unity) framework.
+
+## Running Tests
+
+```bash
+# All test suites
+pio test -e native
+
+# Single suite
+pio test -e native -f test_your_module
+
+# Verbose (shows build errors in detail)
+pio test -e native -f test_your_module -vvv
+```
+
+### Helper Scripts (Useful Shortcuts)
+
+These wrappers are handy when local host dependencies are missing or when you want repeatable commands.
+
+```bash
+# Run native tests in Docker (recommended on macOS / non-Linux hosts)
+./bin/test-native-docker.sh
+
+# Pass normal PlatformIO test args through to Dockerized test run
+./bin/test-native-docker.sh -f test_your_module
+
+# Force Docker image rebuild (after dependency changes)
+./bin/test-native-docker.sh --rebuild
+
+# Run simulator integration check (build native first)
+pio run -e native && ./bin/test-simulator.sh
+
+# Build and run meshtasticd natively
+./bin/native-run.sh
+
+# Build and run under gdbserver on localhost:2345
+./bin/native-gdbserver.sh
+
+# Build native release artifact into ./release/
+./bin/build-native.sh native
+```
+
+Notes:
+
+- The repository script name is `./bin/test-simulator.sh` (there is no `test-native-simulator.sh`).
+- `./bin/test-native-docker.sh` is the closest match to CI behavior for native tests and avoids host package setup.
+
+### System Dependencies (Ubuntu/Debian)
+
+The native build requires several system libraries. Install them all at once:
+
+```bash
+sudo apt-get install -y \
+  libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev \
+  libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev libuv1-dev
+```
+
+See `.github/actions/setup-native/action.yml` for the canonical list.
+
+## Creating a New Test Suite
+
+### 1. Directory Structure
+
+```text
+test/test_your_module/test_main.cpp
+```
+
+One file per suite. No per-test `platformio.ini` is needed — tests build under the `[env:native]` environment defined in the root `platformio.ini`.
+
+### 2. File Skeleton
+
+```cpp
+#include "MeshTypes.h"      // Include BEFORE TestUtil.h (provides NodeNum, etc.)
+#include "TestUtil.h"        // initializeTestEnvironment(), testDelay()
+#include <unity.h>
+
+#if YOUR_FEATURE_GUARD       // Same #if guard as the module under test
+
+#include "FSCommon.h"
+#include "gps/RTC.h"
+#include "mesh/NodeDB.h"
+#include "modules/YourModule.h"
+#include <cstdio>
+#include <cstring>
+#include <memory>
+
+// --- Test output helpers ---
+// Unity swallows printf/stdout. Only TEST_MESSAGE() output appears in results.
+#define MSG_BUF_LEN 200
+#define TEST_MSG_FMT(fmt, ...) do { \
+    char _buf[MSG_BUF_LEN]; \
+    snprintf(_buf, sizeof(_buf), fmt, __VA_ARGS__); \
+    TEST_MESSAGE(_buf); \
+} while(0)
+
+// --- Tests ---
+
+void test_example()
+{
+    TEST_MESSAGE("=== Example test ===");
+    TEST_ASSERT_TRUE(true);
+}
+
+// --- Unity lifecycle ---
+
+void setUp(void) { /* runs before every test */ }
+void tearDown(void) { /* runs after every test */ }
+
+void setup()
+{
+    initializeTestEnvironment();   // MUST call — sets up RTC, OSThread, console
+    UNITY_BEGIN();
+    RUN_TEST(test_example);
+    exit(UNITY_END());             // exit() required — Unity runner expects it
+}
+
+void loop() {}
+
+#else // !YOUR_FEATURE_GUARD
+
+void setUp(void) {}
+void tearDown(void) {}
+
+void setup()
+{
+    initializeTestEnvironment();
+    UNITY_BEGIN();
+    exit(UNITY_END());
+}
+
+void loop() {}
+
+#endif
+```
+
+### 3. Feature Guard
+
+Wrap the entire test body in the same `#if` guard the module uses (e.g. `#if HAS_VARIABLE_HOPS`, `#if !MESHTASTIC_EXCLUDE_GPS`). When the feature is disabled, the `#else` branch produces an empty passing suite.
+
+## Common Patterns
+
+### MockNodeDB
+
+Most module tests need to inject nodes with controlled hop distances and ages:
+
+```cpp
+class MockNodeDB : public NodeDB
+{
+  public:
+    void clearTestNodes()
+    {
+        testNodes.clear();
+        numMeshNodes = 0;
+    }
+
+    void addTestNode(NodeNum num, uint8_t hopsAway, bool hasHops,
+                     uint32_t ageSecs, bool viaMqtt = false)
+    {
+        meshtastic_NodeInfoLite node = meshtastic_NodeInfoLite_init_zero;
+        node.num = num;
+        node.has_hops_away = hasHops;
+        node.hops_away = hopsAway;
+        node.via_mqtt = viaMqtt;
+        node.last_heard = getTime() - ageSecs;
+        testNodes.push_back(node);
+        meshNodes = &testNodes;
+        numMeshNodes = testNodes.size();
+    }
+
+    std::vector<meshtastic_NodeInfoLite> testNodes;
+};
+
+static MockNodeDB *mockNodeDB = nullptr;
+```
+
+Set `nodeDB = mockNodeDB;` in `setUp()`.
+
+### Test Shim (Exposing Protected/Private Members)
+
+Subclass the module under test to make protected methods callable and private members writable:
+
+```cpp
+class YourModuleTestShim : public YourModule
+{
+  public:
+    // Expose protected methods
+    using YourModule::runOnce;
+    using YourModule::someProtectedMethod;
+
+    // Access private members via friend (see below)
+    void setPrivateField(int x) { privateField = x; }
+};
+```
+
+In the module header, grant friend access under the `UNIT_TEST` define (set automatically by PlatformIO's test framework):
+
+```cpp
+// In YourModule.h, inside the class body:
+#ifdef UNIT_TEST
+    friend class YourModuleTestShim;
+#endif
+```
+
+### Global Singleton Lifecycle
+
+Most modules use a global pointer (`extern YourModule *yourModule;`). Manage it carefully:
+
+```cpp
+void setUp(void) {
+    // ... setup ...
+}
+
+void tearDown(void) {
+    yourModule = nullptr;   // prevent dangling pointer between tests
+}
+
+void test_something() {
+    auto shim = std::unique_ptr<YourModuleTestShim>(new YourModuleTestShim());
+    yourModule = shim.get();
+    // ... test ...
+    yourModule = nullptr;
+}
+```
+
+## Pitfalls and How to Avoid Them
+
+### 1. Persisted Filesystem State Leaks Between Tests
+
+Modules that save state to `/prefs/*.bin` will have that state loaded by the next test's constructor via `loadState()`. This causes values from one test (e.g. rolling averages from a megamesh scenario) to bleed into unrelated tests.
+
+**Fix:** Delete state files at the start of `setUp()`:
+
+```cpp
+void setUp(void) {
+    // ...
+#ifdef FSCom
+    FSCom.remove("/prefs/your_module.bin");
+#endif
+}
+```
+
+### 2. File-Scope Mutable Globals Persist Across Tests
+
+Variables like `static uint8_t someDenominator = 8;` in the module `.cpp` file retain mutations from previous tests. This is distinct from member variables — it affects all instances.
+
+**Fix:** Add a `static void resetGlobal()` method to the module and call it in `setUp()`.
+
+### 3. Randomness Breaks Determinism
+
+If the module uses `rand()` for jitter or similar, test results become non-reproducible.
+
+**Fix:** Add a static enable/disable flag:
+
+```cpp
+// Module header:
+static void setJitter(bool enabled) { s_jitterEnabled = enabled; }
+
+// Test setUp:
+YourModule::setJitter(false);
+
+// Test tearDown:
+YourModule::setJitter(true);
+```
+
+### 4. Time-Dependent Logic Produces Zeros
+
+Rolling averages weighted by `elapsedMs / ONE_HOUR_MS` collapse to zero when tests complete in microseconds. Sample windows, EMA alphas, and interval-based accumulators all suffer from this.
+
+**Fix:** Expose the timestamp via friend access and simulate realistic elapsed time:
+
+```cpp
+// In test shim:
+void setWindowStartMs(uint32_t ms) { windowStartMs = ms; }
+
+// In test:
+shim.setWindowStartMs(millis() - 3600000UL);  // pretend 1 hour elapsed
+```
+
+### 5. Capacity Limits Cause Cascading Failures
+
+Fixed-size data structures (hash sets, ring buffers) overflow when tests inject more data than fits. This triggers early flushes with near-zero time fractions, compounding the time-dependent-zeros problem.
+
+**Fix:** Simulate multiple realistic time windows rather than one massive burst. Let adaptive mechanisms (if any) self-tune over several rolls.
+
+## setUp/tearDown Checklist
+
+- [ ] Create and clear MockNodeDB (if needed)
+- [ ] Zero global configs: `config`, `moduleConfig`, `myNodeInfo`
+- [ ] Set `nodeDB = mockNodeDB`
+- [ ] Delete persisted state files (`FSCom.remove(...)`)
+- [ ] Reset file-scope mutable globals
+- [ ] Disable randomness/jitter flags
+- [ ] In `tearDown`: null the global singleton pointer, restore flags
+
+## Test Organization
+
+A well-structured test suite follows this pattern:
+
+1. **Topology/scenario builders** — static helper functions that set up specific test conditions
+2. **Injection helpers** — simulate realistic traffic, time, or event patterns
+3. **Scenario tests** — each builds a scenario, runs the module, asserts on outcomes
+4. **Lifecycle tests** — state persistence, startup from blank, restart recovery
+5. **Summary test** (optional) — emits a scenario table into the log for quick CI review
+
+## Existing Test Suites
+
+| Suite                        | Module Under Test             |
+| ---------------------------- | ----------------------------- |
+| `test_crypto`                | CryptoEngine                  |
+| `test_mqtt`                  | MQTT integration              |
+| `test_radio`                 | Radio interface               |
+| `test_mesh_module`           | Module framework              |
+| `test_meshpacket_serializer` | Packet serialization          |
+| `test_transmit_history`      | Retransmission tracking       |
+| `test_atak`                  | ATAK integration              |
+| `test_default`               | Default configuration helpers |
+| `test_http_content_handler`  | HTTP handling                 |
+| `test_serial`                | Serial communication          |
+| `test_hop_scaling`           | Hop scaling algorithm         |
+| `test_traffic_management`    | Traffic management            |

userPrefs.jsonc

@@ -57,6 +57,7 @@
   // "USERPREFS_MQTT_ROOT_TOPIC": "event/REPLACEME",
   // "USERPREFS_RINGTONE_NAG_SECS": "60",
   // "USERPREFS_NODEINFO_REPLY_SUPPRESS_SECS": "43200",
+  // "USERPREFS_UI_TEST_LOG": "true", // Test-only: emits `Screen: frame N/M name=... reason=...` log per UI transition (for the mcp-server ui test tier); off in release builds.
   "USERPREFS_RINGTONE_RTTTL": "24:d=32,o=5,b=565:f6,p,f6,4p,p,f6,p,f6,2p,p,b6,p,b6,p,b6,p,b6,p,b,p,b,p,b,p,b,p,b,p,b,p,b,p,b,1p.,2p.,p",
   // "USERPREFS_NETWORK_IPV6_ENABLED": "1",
   "USERPREFS_TZ_STRING": "tzplaceholder                                         "

variants/esp32/m5stack_coreink/platformio.ini

@@ -19,7 +19,7 @@ build_flags =
 lib_deps = 
   ${esp32_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.8
+  zinggjm/GxEPD2@1.6.9
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
   lewisxhe/SensorLib@0.3.4
 lib_ignore =

variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini

@@ -11,7 +11,7 @@ upload_speed = 921600
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.8
+  zinggjm/GxEPD2@1.6.9
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1

variants/esp32s3/esp32-s3-pico/platformio.ini

@@ -23,4 +23,4 @@ build_flags = ${esp32s3_base.build_flags}
 
 lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.8
+  zinggjm/GxEPD2@1.6.9

variants/esp32s3/m5stack_cardputer_adv/platformio.ini

@@ -10,9 +10,6 @@ build_flags =
   -D M5STACK_CARDPUTER_ADV
   -D ARDUINO_USB_CDC_ON_BOOT=1
   -I variants/esp32s3/m5stack_cardputer_adv
-build_src_filter =
-  ${esp32s3_base.build_src_filter}
-  +<../variants/esp32s3/m5stack_cardputer_adv>
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=git-refs depName=meshtastic-st7789 packageName=https://github.com/meshtastic/st7789 gitBranch=main

variants/esp32s3/t-deck-pro-v1_1/pins_arduino.h

@@ -0,0 +1,19 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// used for keyboard, touch controller, beam sensor, and gyroscope
+static const uint8_t SDA = 13;
+static const uint8_t SCL = 14;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = 3;
+static const uint8_t MOSI = 33;
+static const uint8_t MISO = 47;
+static const uint8_t SCK = 36;
+
+#endif /* Pins_Arduino_h */

variants/esp32s3/t-deck-pro-v1_1/platformio.ini

@@ -0,0 +1,41 @@
+[env:t-deck-pro-v1_1]
+custom_meshtastic_hw_model = 102
+custom_meshtastic_hw_model_slug = T_DECK_PRO
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = LILYGO T-Deck Pro
+custom_meshtastic_images = tdeck_pro.svg
+custom_meshtastic_tags = LilyGo
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
+extends = esp32s3_base
+board = t-deck-pro
+board_check = true
+upload_protocol = esptool
+
+build_flags = 
+  ${esp32s3_base.build_flags} -I variants/esp32s3/t-deck-pro-v1_1
+  -D T_DECK_PRO
+  -D USE_EINK
+  -D EINK_DISPLAY_MODEL=GxEPD2_310_GDEQ031T10
+  -D EINK_WIDTH=240
+  -D EINK_HEIGHT=320
+  ;-D USE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
+  -D EINK_LIMIT_FASTREFRESH=10           ; How many consecutive fast-refreshes are permitted
+  -D EINK_LIMIT_GHOSTING_PX=2000        ; (Optional) How much image ghosting is tolerated
+  -D EINK_NOT_HIBERNATE                 ; Disable hibernate to avoid issues with elink
+
+lib_deps =
+  ${esp32s3_base.lib_deps}
+  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
+  zinggjm/GxEPD2@1.6.9
+  # renovate: datasource=git-refs depName=CSE_Touch packageName=https://github.com/CIRCUITSTATE/CSE_Touch gitBranch=main
+  https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
+  # renovate: datasource=github-tags depName=CSE_CST328 packageName=CIRCUITSTATE/CSE_CST328
+  https://github.com/CIRCUITSTATE/CSE_CST328/archive/refs/tags/v0.0.4.zip
+  # renovate: datasource=git-refs depName=BQ27220 packageName=https://github.com/mverch67/BQ27220 gitBranch=main
+  https://github.com/mverch67/BQ27220/archive/07d92be846abd8a0258a50c23198dac0858b22ed.zip
+  # renovate: datasource=custom.pio depName=Adafruit DRV2605 packageName=adafruit/library/Adafruit DRV2605 Library
+  adafruit/Adafruit DRV2605 Library@1.2.4

variants/esp32s3/t-deck-pro-v1_1/variant.h

@@ -0,0 +1,106 @@
+// Display (E-Ink)
+#define PIN_EINK_CS 34
+#define PIN_EINK_BUSY 37
+#define PIN_EINK_DC 35
+#define PIN_EINK_RES 16
+#define PIN_EINK_SCLK 36
+#define PIN_EINK_MOSI 47
+#define TFT_BL 45 // option , default not backlight
+
+#define I2C_SDA SDA
+#define I2C_SCL SCL
+
+// CST328 touch screen (implementation in src/platform/extra_variants/t_deck_pro/variant.cpp)
+#define HAS_TOUCHSCREEN 1
+#define CST328_PIN_INT 12
+#define CST328_PIN_RST 38
+
+#define USE_POWERSAVE
+#define SLEEP_TIME 120
+
+// GNSS
+#define HAS_GPS 1
+#define GPS_BAUDRATE 38400
+#define PIN_GPS_EN 39
+#define GPS_EN_ACTIVE 1
+#define GPS_RX_PIN 44
+#define GPS_TX_PIN 43
+#define PIN_GPS_PPS 1
+
+#define BUTTON_PIN 0
+
+// vibration motor
+#define HAS_DRV2605
+#define PIN_DRV_EN 2
+
+// Have SPI interface SD card slot
+#define HAS_SDCARD
+#define SDCARD_USE_SPI1
+#define SPI_MOSI (33)
+#define SPI_SCK (36)
+#define SPI_MISO (47)
+#define SPI_CS (48)
+#define SDCARD_CS SPI_CS
+#define SD_SPI_FREQUENCY 75000000U
+
+// TCA8418 keyboard
+#define KB_BL_PIN 42
+#define CANNED_MESSAGE_MODULE_ENABLE 1
+
+// microphone PCM5102A
+#define PCM5102A_SCK 47
+#define PCM5102A_DIN 17
+#define PCM5102A_LRCK 18
+
+// LTR_553ALS light sensor
+#define HAS_LTR553ALS
+
+// gyroscope BHI260AP
+// #define BOARD_1V8_EN 38 //Deck-Pro remove 1.8v en pin
+#define HAS_BHI260AP
+
+// battery charger BQ25896
+#define HAS_PPM 1
+#define XPOWERS_CHIP_BQ25896
+
+// battery quality management BQ27220
+#define HAS_BQ27220 1
+#define BQ27220_I2C_SDA SDA
+#define BQ27220_I2C_SCL SCL
+#define BQ27220_DESIGN_CAPACITY 1400
+
+// LoRa
+#define USE_SX1262
+#define USE_SX1268
+
+#define LORA_EN 46 // LoRa enable pin
+#define LORA_SCK 36
+#define LORA_MISO 47
+#define LORA_MOSI 33
+#define LORA_CS 3
+
+#define LORA_DIO0 -1 // a No connect on the SX1262 module
+#define LORA_RESET 4
+#define LORA_DIO1 5 // SX1262 IRQ
+#define LORA_DIO2 6 // SX1262 BUSY
+#define LORA_DIO3   // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
+
+#define SX126X_CS LORA_CS // FIXME - we really should define LORA_CS instead
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+// Not really an E22 but TTGO seems to be trying to clone that
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 2.4
+// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
+// code)
+
+#define MODEM_POWER_EN 41
+#define MODEM_PWRKEY 40
+#define MODEM_RST 9
+#define MODEM_RI 7
+#define MODEM_DTR 8
+#define MODEM_RX 10
+#define MODEM_TX 11
+
+#define HAS_PHYSICAL_KEYBOARD 1

variants/esp32s3/t-deck-pro/platformio.ini

@@ -34,7 +34,7 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.8
+  zinggjm/GxEPD2@1.6.9
   # renovate: datasource=git-refs depName=CSE_Touch packageName=https://github.com/CIRCUITSTATE/CSE_Touch gitBranch=main
   https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
   # renovate: datasource=github-tags depName=CSE_CST328 packageName=CIRCUITSTATE/CSE_CST328

variants/esp32s3/t-watch-s3/variant.h

@@ -39,7 +39,7 @@
 #define DAC_I2S_BCK 48
 #define DAC_I2S_WS 15
 #define DAC_I2S_DOUT 46
-#define DAC_I2S_MCLK 0
+#define DAC_I2S_MCLK -1
 
 #define HAS_AXP2101
 

variants/esp32s3/t5s3_epaper/nicheGraphics.h

@@ -6,26 +6,27 @@ NicheGraphics attempts a different approach:
 Per-device config takes place in this setupNicheGraphics() method
 (And a small amount in platformio.ini)
 
-This file sets up InkHUD for Heltec VM-E290.
-Different NicheGraphics UIs and different hardware variants will each have their own setup procedure.
+This file sets up InkHUD for the LilyGo T5-E-Paper-S3-Pro.
+
+The board uses a 4.7" ED047TC1 parallel e-paper display (960×540, 8-bit parallel interface).
+This is driven via the FastEPD library through the NicheGraphics ED047TC1 driver adapter.
 
 */
 
 #pragma once
 
 #include "configuration.h"
-#include "mesh/MeshModule.h"
 
 #ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
 
 // InkHUD-specific components
 // ---------------------------
-// #include "graphics/niche/InkHUD/InkHUD.h"
-#include "graphics/niche/InkHUD/WindowManager.h"
+#include "graphics/niche/InkHUD/InkHUD.h"
 
 // Applets
 #include "graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h"
 #include "graphics/niche/InkHUD/Applets/User/DM/DMApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/FavoritesMap/FavoritesMapApplet.h"
 #include "graphics/niche/InkHUD/Applets/User/Heard/HeardApplet.h"
 #include "graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h"
 #include "graphics/niche/InkHUD/Applets/User/RecentsList/RecentsListApplet.h"
@@ -34,26 +35,20 @@ Different NicheGraphics UIs and different hardware variants will each have their
 // Shared NicheGraphics components
 // --------------------------------
 #include "graphics/niche/Drivers/Backlight/LatchingBacklight.h"
-#include "graphics/niche/Drivers/EInk/DEPG0290BNS800.h"
+#include "graphics/niche/Drivers/EInk/ED047TC1.h"
 #include "graphics/niche/Inputs/TwoButton.h"
 
 void setupNicheGraphics()
 {
     using namespace NicheGraphics;
 
-    // SPI
-    // -----------------------------
-
-    // Display is connected to HSPI
-    SPIClass *hspi = new SPIClass(HSPI);
-    hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS);
-
     // E-Ink Driver
     // -----------------------------
+    // The ED047TC1 is a parallel display — no SPI bus setup needed.
+    // begin() args are part of the EInk interface but are ignored for parallel displays.
 
-    // Use E-Ink driver
-    Drivers::EInk *driver = new Drivers::DEPG0290BNS800;
-    driver->begin(hspi, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY);
+    Drivers::EInk *driver = new Drivers::ED047TC1;
+    driver->begin(nullptr, 0, 0, 0);
 
     // InkHUD
     // ----------------------------
@@ -67,57 +62,57 @@ void setupNicheGraphics()
     // Set how unhealthy additional FAST updates beyond this number are
     inkhud->setDisplayResilience(7, 1.5);
 
-    // Prepare fonts
-    InkHUD::Applet::fontLarge = FREESANS_9PT_WIN1252;
-    InkHUD::Applet::fontSmall = FREESANS_6PT_WIN1252;
+    // Prepare fonts — use larger sizes to suit the 4.7" screen at ~234 DPI
+    InkHUD::Applet::fontLarge = FREESANS_24PT_WIN1253;
+    InkHUD::Applet::fontMedium = FREESANS_18PT_WIN1253;
+    InkHUD::Applet::fontSmall = FREESANS_12PT_WIN1253;
 
-    // Init settings, and customize defaults
+    // Customize default settings
     inkhud->persistence->settings.userTiles.maxCount = 2; // How many tiles can the display handle?
-    inkhud->persistence->settings.rotation = 1;           // 90 degrees clockwise
+    inkhud->persistence->settings.rotation = 3;           // 270 degrees clockwise
     inkhud->persistence->settings.userTiles.count = 1;    // One tile only by default, keep things simple for new users
-    inkhud->persistence->settings.optionalMenuItems.nextTile = false;  // Behavior handled by aux button instead
-    inkhud->persistence->settings.optionalFeatures.batteryIcon = true; // Device definitely has a battery
+    inkhud->persistence->settings.optionalFeatures.batteryIcon = true;
+    inkhud->persistence->settings.optionalMenuItems.backlight = true;
 
-    // Setup backlight
-    // Note: AUX button behavior configured further down
-    Drivers::LatchingBacklight *backlight = Drivers::LatchingBacklight::getInstance();
-    backlight->setPin(PIN_EINK_EN);
+    // Alignment must cancel rotation for visual-frame touch input: (rotation + alignment) % 4 == 0.
+    inkhud->persistence->settings.joystick.alignment = (4 - inkhud->persistence->settings.rotation) % 4;
 
     // Pick applets
     // Note: order of applets determines priority of "auto-show" feature
-    // Optional arguments for defaults:
-    // - is activated?
-    // - is autoshown?
-    // - is foreground on a specific tile (index)?
-    inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet, true, true); // Activated, autoshown
-    inkhud->addApplet("DMs", new InkHUD::DMApplet);
-    inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0));
-    inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1));
-    inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true); // Activated
-    inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet);
+    inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet, false, false);      // Not Active, not autoshown
+    inkhud->addApplet("DMs", new InkHUD::DMApplet, true, true);                         // Activated, Autoshown
+    inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0), true, true);   // Activated, Autoshown
+    inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1), false, false); // Not Active, not autoshown
+    inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true, false);           // Activated, not autoshown
+    inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet, true, false);      // Activated, not autoshown
     inkhud->addApplet("Heard", new InkHUD::HeardApplet, true, false, 0); // Activated, not autoshown, default on tile 0
-    // inkhud->addApplet("Basic", new InkHUD::BasicExampleApplet);
-    // inkhud->addApplet("NewMsg", new InkHUD::NewMsgExampleApplet);
+    inkhud->addApplet("Favorites Map", new InkHUD::FavoritesMapApplet, false, false); // Not Active, not autoshown
+
+    // Backlight
+    // ----------------------------
+    Drivers::LatchingBacklight *backlight = Drivers::LatchingBacklight::getInstance();
+    backlight->setPin(BOARD_BL_EN); // GPIO11 on V2
 
     // Start running InkHUD
     inkhud->begin();
 
+    // Touch navigation requires joystick mode — enforce post-begin so flash cannot override.
+    inkhud->persistence->settings.joystick.enabled = true;
+    inkhud->persistence->settings.joystick.aligned = true;
+
     // Buttons
     // --------------------------
 
     Inputs::TwoButton *buttons = Inputs::TwoButton::getInstance(); // A shared NicheGraphics component
 
-    // Setup the main user button (0)
+    // Setup the main user button (boot button, GPIO 0)
     buttons->setWiring(0, BUTTON_PIN);
-    buttons->setHandlerShortPress(0, []() { InkHUD::InkHUD::getInstance()->shortpress(); });
-    buttons->setHandlerLongPress(0, []() { InkHUD::InkHUD::getInstance()->longpress(); });
+    buttons->setHandlerShortPress(0, [inkhud]() { inkhud->shortpress(); });
+    buttons->setHandlerLongPress(0, [inkhud]() { inkhud->longpress(); });
 
-    // Setup the aux button (1)
-    // Bonus feature of VME290
-    buttons->setWiring(1, BUTTON_PIN_SECONDARY);
-    buttons->setHandlerShortPress(1, []() { InkHUD::InkHUD::getInstance()->nextTile(); });
+    // No dedicated aux button on this board
 
     buttons->start();
 }
 
-#endif
+#endif