Add libnotify to setup-native (GitHub Actions)

Use libnotify for meshtasticd desktop notifications.

Add "HAS_LIBNOTIFY" macro to guard for builds where libnotify is expected.
This is not included in buildroot/openwrt builds. (no libnotify except when extra repos are added).

Install desktop icon in the correct location on Debian and Fedora packages.
Update dependencies in packaging and dockerfiles.

.claude/commands/diagnose.md

@@ -24,7 +24,12 @@ Call the meshtastic MCP tool bundle and format a structured health report for on
    - `mcp__meshtastic__get_config(section="lora", port=<p>)` — region, preset, channel_num, tx_power, hop_limit.
    - Optionally, if the device seems unhappy (fails to connect, `num_nodes==1` when ≥2 are plugged in, missing firmware*version), open a short firmware log window: `mcp__meshtastic__serial_open(port=<p>, env=<inferred-env>)`, wait 3s, `serial_read(session_id=<s>, max_lines=100)`, `serial_close(session_id=<s>)`. The env should be inferred from the VID map in `mcp-server/run-tests.sh` (nrf52 → rak4631, esp32s3 → heltec-v3) unless `MESHTASTIC_MCP_ENV*<ROLE>` is set.
 
-4. **Render per-device report** as:
+4. **Hub health** (call once, not per-device): `mcp__meshtastic__uhubctl_list()` — enumerates every USB hub the host can see. Note which hubs advertise `ppps=true` and which hub hosts each Meshtastic device (cross-reference by VID). Flag it in the report if:
+   - No hub advertises PPPS → `tests/recovery/` can't run on this setup; hard-recovery via `uhubctl_cycle` isn't available.
+   - A Meshtastic device is on a non-PPPS hub → note it; operator may want to move the device to a PPPS hub to unlock auto-recovery.
+   - `uhubctl_list` raises `ConfigError: uhubctl not found` → just say `uhubctl not installed` in the report; don't treat as a fault.
+
+5. **Render per-device report** as:
 
    ```text
    [nrf52 @ /dev/cu.usbmodem1101]      fw=2.7.23.bce2825, hw=RAK4631
@@ -33,20 +38,22 @@ Call the meshtastic MCP tool bundle and format a structured health report for on
      tx_power    : 30 dBm, hop_limit=3
      peers       : 1 (esp32s3 0x433c2428, pubkey ✓, SNR 6.0 / RSSI -24 dBm)
      primary ch  : McpTest
+     hub         : 1-1.3 port 2 (PPPS, uhubctl-controllable)
      firmware    : no panics in last 3s; NodeInfoModule emitted 2 broadcasts
    ```
 
-   Keep it scannable. If a field is missing or abnormal (no pubkey for a known peer, region=UNSET, num_nodes inconsistent with the hub), flag it inline with a short `⚠︎ <one-line reason>`.
+   Keep it scannable. If a field is missing or abnormal (no pubkey for a known peer, region=UNSET, num_nodes inconsistent with the hub, device on non-PPPS hub), flag it inline with a short `⚠︎ <one-line reason>`.
 
-5. **Cross-device correlation** (only when >1 device is inspected):
+6. **Cross-device correlation** (only when >1 device is inspected):
    - Do both sides see each other in `nodesByNum`? If one does and the other doesn't, that's asymmetric NodeInfo — flag it.
    - Do the LoRa configs match? (region, channel_num, modem_preset should all agree; mismatch = no mesh)
    - Do the primary channel NAMES match? Mismatch = different PSK = no decode.
 
-6. **Suggest next actions only for specific, recognisable failure modes**:
+7. **Suggest next actions only for specific, recognisable failure modes**:
    - Stale PKI pubkey one-way → "run `/test tests/mesh/test_direct_with_ack.py` — the retry + nodeinfo-ping heals this in the test path."
    - Region mismatch → "re-bake one side via `./mcp-server/run-tests.sh --force-bake`."
-   - Device unreachable → point at touch_1200bps + the CP2102-wedged-driver note in run-tests.sh.
+   - Device unreachable, reachable via DFU → `touch_1200bps(port=...)` + `pio_flash`. If not even DFU responds AND the device is on a PPPS hub, escalate to `uhubctl_cycle(role=..., confirm=True)`.
+   - CP2102-wedged-driver on macOS → see the note in `run-tests.sh`.
 
 ## What NOT to do
 

.claude/commands/repro.md

@@ -44,7 +44,8 @@ Re-run a single pytest node ID N times in isolation, track pass rate, and surfac
    - **LoRa airtime collision** → pass rate improves with fewer concurrent transmitters; propose a `time.sleep` gap or retry bump in the test body.
    - **PKI key staleness** → fails on first attempt, passes after self-heal; existing retry loop in `test_direct_with_ack.py` handles this.
    - **NodeInfo cooldown** → `Skip send NodeInfo since we sent it <600s ago` in fail-only logs; needs `broadcast_nodeinfo_ping()` warmup.
-   - **Hardware-specific** (one direction fails, other passes; one device's firmware is older; driver wedged) → specific recovery pointer.
+   - **Hardware-specific** (one direction fails, other passes; one device's firmware is older; driver wedged) → specific recovery pointer. For a device that's wedged past `touch_1200bps`, the next escalation is `uhubctl_cycle(role=..., confirm=True)` to hard-power-cycle its hub port (requires `uhubctl` installed).
+   - **Device went dark mid-run** → fails from some attempt onward, never recovers, firmware log stops arriving. Almost always hardware: a Guru crash + frozen CDC. Hard-power-cycle via `uhubctl_cycle(role=..., confirm=True)` before the next iteration; if that also fails, escalate to replug.
    - **Genuinely unknown** → say so; don't invent a root cause.
 
 7. **Report back** with:

.claude/commands/test.md

@@ -19,16 +19,21 @@ Run `mcp-server/run-tests.sh` and make sense of the output so the operator doesn
 
 2. **Read the pre-flight header.** First ~6 lines print the detected hub (role → port → env). If that line reads `detected hub : (none)`, the wrapper will narrow to `tests/unit` only — say so explicitly in your summary so the operator knows hardware tiers were skipped.
 
-3. **On pass**: one-line summary of the form `N passed, M skipped in <duration>`. Don't enumerate the 52 test names — the user can read those. Do mention if any test was SKIPPED for a NON-placeholder reason (e.g. "role not present on hub" is worth flagging).
+3. **On pass**: one-line summary of the form `N passed, M skipped in <duration>`. Don't enumerate the test names — the user can read those. Do mention any SKIPPED tests and name the cause:
+   - `"role not present on hub"` → device unplugged; operator knows to reconnect.
+   - `"firmware not baked with USERPREFS_UI_TEST_LOG"` → tests/ui skipped because the macro isn't in firmware yet; suggest `--force-bake`.
+   - `"uhubctl not installed"` → tests/recovery + peer-offline skipped; suggest `brew install uhubctl` / `apt install uhubctl`.
+   - `"no PPPS-capable hubs detected"` → tests/recovery skipped because the hub doesn't support per-port power; the tier will never run on that setup.
+   - `"opencv-python-headless is not installed"` → tests/ui auto-deselected by run-tests.sh; suggest `pip install -e 'mcp-server/.[ui]'`.
 
-4. **On failure**: for every FAILED test, open `mcp-server/tests/report.html` and extract the `Meshtastic debug` section for that test. pytest-html embeds the firmware log stream + device state dump there; the 200-line firmware log tail is usually enough to explain the failure. Summarise: which test, one-line assertion message, the firmware log lines that matter (things like `PKI_UNKNOWN_PUBKEY`, `Skip send NodeInfo`, `Error=`, `Guru Meditation`, `assertion failed`).
+4. **On failure**: for every FAILED test, open `mcp-server/tests/report.html` and extract the `Meshtastic debug` section for that test. pytest-html embeds the firmware log stream + device state dump there; the 200-line firmware log tail is usually enough to explain the failure. Summarise: which test, one-line assertion message, the firmware log lines that matter (things like `PKI_UNKNOWN_PUBKEY`, `Skip send NodeInfo`, `Error=`, `Guru Meditation`, `assertion failed`). For UI-tier failures also glance at `mcp-server/tests/ui_captures/<session>/<test>/transcript.md` — it records each step's frame + OCR.
 
 5. **Classify the failure** as one of:
    - **Transient/flake**: LoRa collision, timing-sensitive assertion, first-attempt NAK + successful retry pattern. Propose `/repro <test_node_id>` to confirm.
-   - **Environmental**: device unreachable, port busy, CP2102 driver wedged. Suggest the specific recovery (replug USB, `touch_1200bps`, check `git status userPrefs.jsonc`).
+   - **Environmental**: device unreachable, port busy, CP2102 driver wedged. Suggest the specific recovery in escalation order: (a) replug USB, (b) `touch_1200bps(port=...)` + `pio_flash` for nRF52 DFU, (c) `uhubctl_cycle(role="nrf52", confirm=True)` when a device is fully wedged past DFU (needs `uhubctl` installed — `baked_single`'s auto-recovery hook does this once automatically). Also check `git status userPrefs.jsonc`.
    - **Regression**: same assertion fails repeatedly, firmware log shows a new/unusual error. Surface the diff between expected and observed, identify the module likely responsible.
 
-6. **Never run destructive recovery automatically.** If a failure looks like it needs a reflash, factory*reset, or USB replug, \_describe what to do* — don't execute. The operator decides.
+6. **Never run destructive recovery automatically.** If a failure looks like it needs a reflash, factory*reset, `uhubctl_cycle`, or USB replug, \_describe what to do* — don't execute. The operator decides.
 
 ## Arguments handling
 

.devcontainer/Dockerfile

@@ -34,6 +34,7 @@ RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
     libxcb-xkb-dev \
     libxkbcommon-dev \
     libinput-dev \
+    libnotify-dev \
     && apt-get clean && rm -rf /var/lib/apt/lists/*
 
 RUN pipx install platformio

.github/actions/setup-native/action.yml

@@ -11,4 +11,4 @@ runs:
     - name: Install libs needed for native build
       shell: bash
       run: |
-        sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev libuv1-dev
+        sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev libuv1-dev libnotify-dev

.github/copilot-instructions.md

@@ -70,6 +70,70 @@ PKI (Public Key Infrastructure) messages have special handling:
 - Accepted on a special "PKI" channel
 - Allow encrypted DMs between nodes that discovered each other on downlink-enabled channels
 
+## Encryption & Key Management
+
+Meshtastic packets on the air are typically encrypted one of two ways: the **per-channel symmetric** layer (AES-CTR with a shared PSK) for broadcasts and channel traffic, and the **per-peer PKI** layer (X25519 ECDH → AES-256-CCM) for direct messages and remote admin. A channel with a 0-byte PSK (or Ham mode, which wipes PSKs) transmits cleartext — see the size table below. Both are implemented in `src/mesh/CryptoEngine.cpp`; the send/receive dispatch lives in `src/mesh/Router.cpp`; admin authorization lives in `src/modules/AdminModule.cpp`.
+
+### High-level model
+
+- **Channels** are symmetric rooms: anyone with the PSK can read any message on the channel. Channel 0 is the "primary" channel and ships with the short-form default PSK on factory devices, forming the public mesh most users join. (The LoRa modem preset `LONG_FAST` lives on `config.lora.modem_preset` and is an independent field — don't conflate "channel 0 default PSK" with the modem preset name.)
+- **DMs** addressed to a single node require PKI so that other holders of the channel PSK can't read them. Outside Ham mode, Meshtastic does not fall back to channel-symmetric encryption when the destination public key is unknown.
+- **Remote admin** is a DM carrying an `AdminMessage`. The receiver only acts on it if the sender's public key is on its allowlist (`config.security.admin_key[0..2]`).
+- **Ham mode** (`owner.is_licensed=true`, where `owner` is the local `meshtastic_User` record) disables PKI entirely and sends cleartext — FCC Part 97 prohibits encryption on amateur bands.
+- **No ratchet, no session.** Every packet is encrypted from scratch — a stateless design that matches the high-loss, store-and-forward nature of LoRa.
+
+### Symmetric channel encryption (AES-CTR)
+
+`CryptoEngine::encryptPacket` / `decrypt` / `encryptAESCtr` in `src/mesh/CryptoEngine.cpp`.
+
+- **Cipher**: AES-CTR, AES-128 or AES-256 depending on key length. Same routine in both directions (CTR is a stream cipher, so encrypt == decrypt).
+- **Key**: `ChannelSettings.psk` bytes. Size semantics:
+  - **0 bytes** → no encryption, cleartext on the air
+  - **1 byte** → short-form index into the well-known `defaultpsk[]` in `src/mesh/Channels.h`. Index 0 = cleartext; 1 = defaultpsk unchanged; 2..255 = defaultpsk with its last byte incremented by (index − 1). This is what the CLI's `--ch-set psk default` produces.
+  - **16 bytes** → raw AES-128 key
+  - **32 bytes** → raw AES-256 key
+  - **2..15 bytes** → zero-padded to 16 and used as AES-128 (with a warn log); **17..31 bytes** → zero-padded to 32 and used as AES-256 (with a warn log). Defensive fallback for malformed PSK input, not something to rely on.
+- **Nonce (128 bit)**: `packet_id` (u64 LE) ‖ `from_node` (u32 LE) ‖ `block_counter` (u32, starts at 0). Built in `CryptoEngine::initNonce`.
+- **No AEAD**: channel packets carry no MAC, so the channel-hash byte is not an integrity or authenticity check. `Channels::getHash` is a 1-byte XOR-derived hint over the channel name bytes and PSK bytes that helps receivers pick a candidate channel/PSK for decryption. Because it is only a small hint and collisions are easy to find, it should be described purely as a PSK-selection aid, not as a security filter an attacker cannot bypass.
+- **Channel 0 is special in one way only**: it's the channel the Router attempts PKI decryption on before falling through to AES-CTR. Non-zero channels always go straight to AES-CTR.
+
+### PKI encryption for DMs (X25519 ECDH + AES-256-CCM)
+
+`CryptoEngine::encryptCurve25519` / `decryptCurve25519` in `src/mesh/CryptoEngine.cpp`.
+
+- **Keypair**: Curve25519 (aka X25519), 32-byte public + 32-byte private. Stored in `config.security.public_key` / `private_key`; the public half is mirrored into `owner.public_key` so it rides along in NodeInfo broadcasts and propagates through the mesh like any other identity field.
+- **Key generation** (`generateKeyPair`): stirs `HardwareRNG::fill()` (64 B from platform TRNG when available), the 16-byte `myNodeInfo.device_id`, and a call to `random()` into the rweather/Crypto library's software RNG, then `Curve25519::dh1`. `regeneratePublicKey` recomputes the public half from a known private (used when restoring from backup).
+- **Keygen entry points**: at boot, `NodeDB` calls `generateKeyPair` (or `regeneratePublicKey` when a stored private key is present and passes a low-entropy check) **directly** when `!owner.is_licensed` and `config.lora.region != UNSET`. `ensurePkiKeys` wraps the same logic for runtime/admin flows — it's the path `AdminModule::handleSetConfig` runs when first assigning a valid region or when security config is written; **do not assume it's the universal boot-time gate**, because the NodeDB path bypasses it.
+- **Handshake**: `Curve25519::dh2(local_private, remote_public) → 32-byte shared secret → SHA-256 → 32-byte AES-256 key`. Recomputed per packet. The SHA-256 step is effectively a KDF over the raw ECDH output.
+- **Cipher**: AES-256-CCM via `aes_ccm_ae` / `aes_ccm_ad` (`src/mesh/aes-ccm.cpp`). MAC length (the `M` parameter) is **8 bytes**. No AAD — the MAC covers ciphertext only.
+- **Nonce (13 bytes / 104 bit)**: `aes_ccm_ae`/`aes_ccm_ad` use a 13-byte CCM nonce (`L = 2` is hardcoded in `src/mesh/aes-ccm.cpp`), not a 16-byte nonce. For PKI packets, `CryptoEngine::initNonce(fromNode, packetNum, extraNonce)` starts from the usual packet-derived nonce material, then overwrites nonce bytes `4..7` with a fresh 32-bit `extraNonce = random()`. The effective nonce bytes are therefore: bytes `0..3` = `packet_id`, bytes `4..7` = transmitted `extraNonce`, bytes `8..11` = `from_node`, byte `12` = `0x00`. The receiver reconstructs the same 13-byte nonce from the packet metadata plus the appended `extraNonce`.
+- **Wire overhead**: 12 bytes appended to the ciphertext = 8-byte MAC ‖ 4-byte extraNonce. Defined as `MESHTASTIC_PKC_OVERHEAD = 12` in `src/mesh/RadioInterface.h`. Only the 4-byte `extraNonce` is sent; the rest of the 13-byte CCM nonce is reconstructed from packet fields as described above. The Router's send path checks this overhead against `MAX_LORA_PAYLOAD_LEN` before committing to PKI.
+- **Send selection** (`Router::send`): the sender enters the PKI path when **all** hold — we're the originator AND not Ham mode AND not Portduino simradio AND not on the `serial`/`gpio` channels (unless the packet is already marked `pki_encrypted`) AND `config.security.private_key.size == 32` AND destination is a single node (not broadcast) AND the portnum isn't infrastructure. `TRACEROUTE_APP`, `NODEINFO_APP`, `ROUTING_APP`, and `POSITION_APP` are routed through channel encryption even when DMed (these need to be readable by relaying peers). Once on the PKI path, if the destination's public key isn't in our NodeDB the send **fails** with `PKI_SEND_FAIL_PUBLIC_KEY` — it does not silently fall back to channel encryption. If the client explicitly set `pki_encrypted=true` and any condition blocks PKI, the send fails with `PKI_FAILED`.
+- **Receive selection** (`Router::perhapsDecode`): try PKI decrypt first when `channel == 0` AND `isToUs(p)` AND not broadcast AND both peers have public keys in NodeDB AND `rawSize > MESHTASTIC_PKC_OVERHEAD`. On success the packet gets `pki_encrypted=true` stamped and the sender's public key copied into `p->public_key` for downstream authorization.
+
+### Remote admin authorization
+
+Implemented in `src/modules/AdminModule.cpp` → `handleReceivedProtobuf`. The authorization check runs in this order:
+
+1. **Response messages** — if `messageIsResponse(r)` is true (the payload is a response to one of our earlier admin requests), it's accepted without any further check. The in-file comment flags this as a known-untightened gap: a stricter implementation would remember which `public_key` we last queried and reject responses that don't match.
+2. **Local admin** — `mp.from == 0` (phone app over BLE, serial CLI, internal module); never travels over the air. **Rejected** if `config.security.is_managed` is true, because managed devices expect admin to arrive over the air through an authorized remote path.
+3. **Legacy admin channel (deprecated)** — the packet arrived on a channel named literally `"admin"`. Gated by `config.security.admin_channel_enabled`; returns `NOT_AUTHORIZED` if the flag is false. Kept for backward compatibility; new deployments should use PKI admin.
+4. **PKI admin (preferred for remote)** — `mp.pki_encrypted == true` AND `mp.public_key` matches one of `config.security.admin_key[0..2]` (up to three authorized 32-byte Curve25519 public keys, typically copied from the admin node's own `user.public_key`).
+5. **Fallthrough** → `NOT_AUTHORIZED`.
+
+On top of authorization, any remote admin message that **mutates** state (not a request, not a response) also has to pass a session-key check (`checkPassKey`): the client must first pull a fresh 8-byte `session_passkey` via `get_admin_session_key_request`, then echo that passkey back in the mutating message. The device rotates the passkey after 150 s and rejects values older than 300 s — a narrow anti-replay window on top of the PKI layer.
+
+`config.security.is_managed = true` disables **local** admin writes (`mp.from == 0` is rejected). It does not by itself force every admin action through PKI — the legacy `"admin"` channel still authorizes remote admin when `config.security.admin_channel_enabled == true`. The AdminModule refuses to persist `is_managed=true` unless at least one `admin_key` is populated — a deliberate guard against operators locking themselves out.
+
+### Key-rotation hazards (actions that invalidate peers)
+
+- **`factory_reset_device`** (the "full" variant, calls `NodeDB::factoryReset(eraseBleBonds=true)`) → **wipes** the X25519 private key; a fresh keypair is generated on the next region-set. Every existing peer holds the old public key, so DMs to this node silently fail PKI decrypt until every peer re-exchanges NodeInfo.
+- **`factory_reset_config`** (the "partial" variant, calls `NodeDB::factoryReset()` with `eraseBleBonds=false`) → **preserves** the X25519 private key in `installDefaultConfig(preserveKey=true)`; the public key is zeroed and gets rebuilt from the preserved private key on the next boot via the NodeDB path's `regeneratePublicKey` call. Identity is preserved and the mesh does not need to re-exchange keys.
+- **`region=UNSET → valid region`** → `ensurePkiKeys` runs inside the same `handleSetConfig` path; missing keys get generated at that moment.
+- **Ham mode transitions** — entering Ham mode (`user.is_licensed=true`) runs `Channels::ensureLicensedOperation`, which **wipes every channel PSK** (all traffic becomes cleartext) and disables the legacy admin channel. The X25519 private key is preserved on the device but not used because `Router::send` skips PKI when `owner.is_licensed` is true. Leaving Ham mode re-enables PKI with the preserved keypair but does not restore the wiped channel PSKs — the operator has to re-set them.
+- **Channel 0 PSK change** → every peer must re-learn the channel hash; cached NodeInfo becomes temporarily unreachable until the next broadcast.
+- **`security.private_key` blanked via admin** → regenerates both halves (unless in Ham mode) and propagates the new public key via NodeInfo.
+
 ## Project Structure
 
 ```
@@ -80,7 +144,7 @@ firmware/
 │   │   ├── NodeDB.*       # Node database management
 │   │   ├── Router.*       # Packet routing
 │   │   ├── Channels.*     # Channel management
-│   │   ├── CryptoEngine.* # AES-CCM encryption
+│   │   ├── CryptoEngine.* # AES-CTR (channels) + X25519 ECDH→AES-256-CCM (PKI for DMs/admin)
 │   │   ├── *Interface.*   # Radio interface implementations
 │   │   ├── api/           # WiFi/Ethernet server APIs (ServerAPI, PacketAPI)
 │   │   ├── http/          # HTTP server (WebServer, ContentHandler)
@@ -296,6 +360,23 @@ Key defines in variant.h:
 
 ## Build System
 
+## Agent Tooling Baseline
+
+Mirror counterpart: `AGENTS.md` under **Agent Tooling Baseline**.
+
+To reduce avoidable agent mistakes, assume these tools are available (or install them before significant repo work):
+
+- **Required CLI basics**: `bash`, `git`, `find`, `grep`, `sed`, `awk`, `xargs`
+- **Strongly recommended**: `rg` (ripgrep) for fast file/text search, `jq` for JSON processing
+- **Build/test tools**: `python3`, `pip`, virtualenv (`python3 -m venv`), `platformio` (`pio`)
+- **Containerized native testing**: `docker` (especially important on macOS / non-Linux hosts)
+
+Fallback expectations for agents:
+
+- If `rg` is unavailable, use `find` + `grep` instead of failing.
+- For native tests on hosts without Linux deps, prefer `./bin/test-native-docker.sh`.
+- The simulator helper script is `./bin/test-simulator.sh`.
+
 Uses **PlatformIO** with custom scripts:
 
 - `bin/platformio-pre.py` - Pre-build script
@@ -448,6 +529,8 @@ Run with: `pio test -e native`
 
 Simulation testing: `bin/test-simulator.sh`
 
+Quick entry point for new test modules: `test/README.md` (native unit-test authoring guide, skeleton, pitfalls, and setup checklist).
+
 ### Hardware-in-the-loop tests (`mcp-server/tests/`)
 
 Separate pytest suite that exercises real USB-connected Meshtastic devices. See the **MCP Server & Hardware Test Harness** section below for invocation, tier layout, and agent usage rules.
@@ -474,7 +557,7 @@ The repo registers the server via `.mcp.json` at the repo root — Claude Code p
 
 **One MCP call per port at a time.** `SerialInterface` holds an exclusive OS-level lock on the serial port for its lifetime. If a `serial_*` session is open on `/dev/cu.usbmodem101`, calling `device_info` on the same port will fail fast pointing at the active session. Sequence calls: open → read/mutate → close, then next device. Never parallelize tool calls on the same port.
 
-### MCP tool surface (~32 tools)
+### MCP tool surface (43 tools)
 
 Grouped by purpose. Full argument shapes in `mcp-server/README.md`; a few high-value signatures are called out here.
 
@@ -482,11 +565,13 @@ Grouped by purpose. Full argument shapes in `mcp-server/README.md`; a few high-v
 - **Build & flash**: `build`, `clean`, `pio_flash`, `erase_and_flash` (ESP32 only), `update_flash` (ESP32 OTA), `touch_1200bps`
 - **Serial sessions** (long-running, 10k-line ring buffer): `serial_open`, `serial_read`, `serial_list`, `serial_close`
 - **Device reads**: `device_info`, `list_nodes`
-- **Device writes** (all require `confirm=True`): `set_owner`, `get_config`, `set_config`, `get_channel_url`, `set_channel_url`, `send_text`, `reboot`, `shutdown`, `factory_reset`, `set_debug_log_api`
+- **Device writes**: `set_owner`, `get_config`, `set_config`, `get_channel_url`, `set_channel_url`, `send_text`, `send_input_event` (inject a button/key press via the firmware's InputBroker), `set_debug_log_api`; destructive/power-state writes require `confirm=True`: `reboot`, `shutdown`, `factory_reset`
 - **userPrefs admin** (build-time constants, not runtime config): `userprefs_get`, `userprefs_set`, `userprefs_reset`, `userprefs_manifest`, `userprefs_testing_profile`
 - **Vendor escape hatches**: `esptool_chip_info`, `esptool_erase_flash`, `esptool_raw`, `nrfutil_dfu`, `nrfutil_raw`, `picotool_info`, `picotool_load`, `picotool_raw`
+- **USB power control** (via `uhubctl`, per-port PPPS toggle): `uhubctl_list` (read-only), `uhubctl_power(action='on'|'off', confirm=True)`, `uhubctl_cycle(delay_s, confirm=True)`. Target by raw `(location, port)` or by `role` (`"nrf52"`, `"esp32s3"`); role lookup checks `MESHTASTIC_UHUBCTL_LOCATION_<ROLE>` + `_PORT_<ROLE>` env vars first, falls back to VID auto-detection.
+- **Observability** (UI tier + operator ad-hoc): `capture_screen(role, ocr=True)` — grabs a USB-webcam frame of the device OLED and optionally OCRs it. Requires `mcp-server[ui]` extras (`opencv-python-headless`, `easyocr`) and `MESHTASTIC_UI_CAMERA_DEVICE_<ROLE>` env var; falls through to a 1×1 black PNG `NullBackend` when unconfigured.
 
-`confirm=True` is a tool-level gate on top of whatever permission prompt your MCP host shows. **Don't bypass it** by asking the host to auto-approve — it exists specifically because MCP hosts sometimes remember "always allow this tool" and that's dangerous for `factory_reset` and `erase_and_flash`.
+`confirm=True` is a tool-level gate on top of whatever permission prompt your MCP host shows. **Don't bypass it** by asking the host to auto-approve — it exists specifically because MCP hosts sometimes remember "always allow this tool" and that's dangerous for `factory_reset`, `erase_and_flash`, `uhubctl_power(action='off')`, and `uhubctl_cycle`.
 
 ### Hardware test suite (`mcp-server/run-tests.sh`)
 
@@ -494,14 +579,16 @@ The wrapper auto-detects connected devices (VID → role map: `0x239A` → `nrf5
 
 Suite tiers (collected + run in this order via `pytest_collection_modifyitems`):
 
-1. `tests/unit/` — pure Python (boards parse, pio wrapper, userPrefs parse, testing profile). No hardware.
+1. `tests/unit/` — pure Python (boards parse, pio wrapper, userPrefs parse, testing profile, uhubctl parser). No hardware.
 2. `tests/test_00_bake.py` — flashes each detected device with current `userPrefs.jsonc` merged with the session's test profile. Has its own skip-if-already-baked check comparing region + primary channel to the session profile; skips cheaply on warm devices.
-3. `tests/mesh/` — multi-device mesh: bidirectional send, broadcast delivery, direct-with-ACK, mesh formation within 60s. Parametrized `[nrf52->esp32s3]` and `[esp32s3->nrf52]`.
+3. `tests/mesh/` — multi-device mesh: bidirectional send, broadcast delivery, direct-with-ACK, mesh formation within 60s. Parametrized `[nrf52->esp32s3]` and `[esp32s3->nrf52]`. Includes `test_peer_offline_recovery` which uses uhubctl to physically power off one peer mid-conversation (requires uhubctl; skips without).
 4. `tests/telemetry/` — `DEVICE_METRICS_APP` broadcast timing.
 5. `tests/monitor/` — boot-log panic check.
-6. `tests/fleet/` — PSK seed session isolation.
-7. `tests/admin/` — channel URL roundtrip, owner persistence across reboot.
-8. `tests/provisioning/` — region + modem + slot bake, admin key presence, `UNSET` region blocks TX, userPrefs survive factory reset.
+6. `tests/recovery/` — `uhubctl` power-cycle round-trip + NVS persistence across hard reset. Requires `uhubctl` installed and a PPPS-capable hub; entire tier auto-skips otherwise.
+7. `tests/ui/` — input-broker-driven screen navigation with camera + OCR evidence.
+8. `tests/fleet/` — PSK seed session isolation.
+9. `tests/admin/` — channel URL roundtrip, owner persistence across reboot.
+10. `tests/provisioning/` — region + modem + slot bake, admin key presence, `UNSET` region blocks TX, userPrefs survive factory reset.
 
 Invocation patterns:
 
@@ -586,15 +673,19 @@ If you're modifying `StreamAPI`, `PhoneAPI`, `NodeInfoModule`, or `userPrefs` fl
 
 ### Recovery playbooks
 
-| Symptom                                                    | First check                                                   | Fix                                                                                                                                                                        |
-| ---------------------------------------------------------- | ------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| `userPrefs.jsonc` dirty after test run                     | `git status --porcelain userPrefs.jsonc`                      | If non-empty, re-run `./mcp-server/run-tests.sh` once — the pre-flight self-heal restores from sidecar. If still dirty, `git checkout userPrefs.jsonc`.                    |
-| Port busy / wedged CP2102 on macOS                         | `lsof /dev/cu.usbserial-0001`                                 | Kill the holder. USB replug if the kernel still reports busy. Often a stale `pio device monitor` or zombie `meshtastic_mcp` process.                                       |
-| nRF52 appears unresponsive                                 | `list_devices` shows VID `0x239A` but `device_info` times out | `touch_1200bps(port=...)` drops it into the DFU bootloader → `pio_flash` re-installs.                                                                                      |
-| Multiple MCP server processes                              | `ps aux \| grep meshtastic_mcp` shows >1                      | Kill all but the one your MCP host spawned. Zombies hold ports and break tests.                                                                                            |
-| Mesh formation fails, one side sees peer but other doesn't | `/diagnose` (or `list_nodes` on both sides)                   | Asymmetric NodeInfo. `test_direct_with_ack` has a heal path; `/repro` it a few times. If persistent, both devices' clocks may be out of sync with their NodeInfo cooldown. |
-| "role not present on hub" in skip reasons                  | `list_devices`                                                | Expected if a device is unplugged. Reconnect before re-running the tier.                                                                                                   |
-| Tests fail only on first attempt then pass on rerun        | —                                                             | State leak from a prior session. Run with `--force-bake` to reset to a known state.                                                                                        |
+| Symptom                                                                           | First check                                                   | Fix                                                                                                                                                                                                                              |
+| --------------------------------------------------------------------------------- | ------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| `userPrefs.jsonc` dirty after test run                                            | `git status --porcelain userPrefs.jsonc`                      | If non-empty, re-run `./mcp-server/run-tests.sh` once — the pre-flight self-heal restores from sidecar. If still dirty, `git checkout userPrefs.jsonc`.                                                                          |
+| Port busy / wedged CP2102 on macOS                                                | `lsof /dev/cu.usbserial-0001`                                 | Kill the holder. USB replug if the kernel still reports busy. Often a stale `pio device monitor` or zombie `meshtastic_mcp` process.                                                                                             |
+| nRF52 appears unresponsive                                                        | `list_devices` shows VID `0x239A` but `device_info` times out | `touch_1200bps(port=...)` drops it into the DFU bootloader → `pio_flash` re-installs.                                                                                                                                            |
+| Device fully wedged (Guru Meditation, frozen CDC, no DFU)                         | `list_devices` shows the VID but every admin call times out   | `uhubctl_cycle(role="nrf52", confirm=True)` hard-power-cycles the port via USB hub PPPS. `baked_single`'s auto-recovery hook does this once automatically if uhubctl is installed. Falls back to physical replug if no PPPS hub. |
+| Multiple MCP server processes                                                     | `ps aux \| grep meshtastic_mcp` shows >1                      | Kill all but the one your MCP host spawned. Zombies hold ports and break tests.                                                                                                                                                  |
+| Mesh formation fails, one side sees peer but other doesn't                        | `/diagnose` (or `list_nodes` on both sides)                   | Asymmetric NodeInfo. `test_direct_with_ack` has a heal path; `/repro` it a few times. If persistent, both devices' clocks may be out of sync with their NodeInfo cooldown.                                                       |
+| "role not present on hub" in skip reasons                                         | `list_devices`                                                | Expected if a device is unplugged. Reconnect before re-running the tier.                                                                                                                                                         |
+| Entire `tests/recovery/` tier skipped                                             | `command -v uhubctl`                                          | Expected if `uhubctl` isn't on PATH. Install via `brew install uhubctl` (macOS) or `apt install uhubctl` (Debian/Ubuntu). Also skips if no hub advertises PPPS.                                                                  |
+| Entire `tests/ui/` tier skipped ("firmware not baked with USERPREFS_UI_TEST_LOG") | reportlog.jsonl for the skip reason                           | Re-run with `--force-bake` so the UI-log macro gets compiled into the fresh firmware. First run after the Round-3 landing always re-bakes.                                                                                       |
+| `tests/ui/` runs but captures are all 1×1 black PNGs                              | `MESHTASTIC_UI_CAMERA_DEVICE_ESP32S3`                         | Env var not set → `NullBackend`. Point a USB webcam at the heltec-v3 OLED and set the device index; `.venv/bin/python -c "import cv2; [print(i, cv2.VideoCapture(i).read()[0]) for i in range(5)]"` discovers it.                |
+| Tests fail only on first attempt then pass on rerun                               | —                                                             | State leak from a prior session. Run with `--force-bake` to reset to a known state.                                                                                                                                              |
 
 ### Never do these without asking
 

.github/prompts/mcp-diagnose.prompt.md

@@ -26,7 +26,12 @@ This prompt assumes the meshtastic MCP server is registered with your VS Code Co
    - `get_config(section="lora", port=<p>)` → region, preset, channel_num, tx_power, hop_limit
    - If anything looks off (can't connect, `num_nodes` wrong, missing `firmware_version`), open a short firmware-log window: `serial_open(port=<p>, env=<inferred>)`, wait 3 seconds, `serial_read(session_id, max_lines=100)`, `serial_close(session_id)`. Infer env from VID (0x239a → `rak4631`, 0x303a/0x10c4 → `heltec-v3`) unless an `MESHTASTIC_MCP_ENV_<ROLE>` env var overrides it.
 
-4. **Render per-device report** as a compact block:
+4. **Hub health** (call once, not per-device): `uhubctl_list()` — enumerates every USB hub the host sees. Cross-reference each Meshtastic device's VID to find which hub + port it's on. Flag in the report if:
+   - No hub advertises `ppps=true` → `tests/recovery/` can't run; hard-recovery via `uhubctl_cycle` isn't available.
+   - A Meshtastic device is on a non-PPPS hub → note it; moving to a PPPS hub unlocks auto-recovery.
+   - `uhubctl_list` raises `ConfigError: uhubctl not found` → report as "uhubctl not installed"; don't treat as a device fault.
+
+5. **Render per-device report** as a compact block:
 
    ```text
    [nrf52 @ /dev/cu.usbmodem1101]      fw=2.7.23.bce2825, hw=RAK4631
@@ -35,20 +40,22 @@ This prompt assumes the meshtastic MCP server is registered with your VS Code Co
      tx_power    : 30 dBm, hop_limit=3
      peers       : 1 (esp32s3 0x433c2428, pubkey ✓, SNR 6.0 / RSSI -24 dBm)
      primary ch  : McpTest
+     hub         : 1-1.3 port 2 (PPPS, uhubctl-controllable)
      firmware    : no panics in last 3s
    ```
 
-   Flag abnormalities inline with `⚠︎ <short reason>` — missing pubkey on a known peer, region UNSET, mismatched channel name, etc.
+   Flag abnormalities inline with `⚠︎ <short reason>` — missing pubkey on a known peer, region UNSET, mismatched channel name, device on non-PPPS hub, etc.
 
-5. **Cross-device correlation** (when >1 device selected):
+6. **Cross-device correlation** (when >1 device selected):
    - Do both see each other in `nodesByNum`?
    - Do `region`, `channel_num`, `modem_preset` match across devices?
    - Do the primary channel names match? (Different name → different PSK → no decode.)
 
-6. **Suggest next steps only for recognizable failure modes**, never speculatively:
+7. **Suggest next steps only for recognizable failure modes**, never speculatively:
    - Stale PKI one-way → "`/mcp-test tests/mesh/test_direct_with_ack.py` — the test's retry+nodeinfo-ping heals this."
    - Region mismatch → "re-bake one side via `./mcp-server/run-tests.sh --force-bake`."
-   - Device unreachable → refer operator to the touch_1200bps + CP2102-wedged-driver notes in `run-tests.sh`.
+   - Device unreachable, DFU reachable → `touch_1200bps(port=...)` + `pio_flash`. If not even DFU responds and the device is on a PPPS hub, escalate to `uhubctl_cycle(role=..., confirm=True)`.
+   - CP2102-wedged-driver on macOS → see `run-tests.sh` notes.
 
 ## Hard constraints
 

.github/prompts/mcp-repro.prompt.md

@@ -46,7 +46,8 @@ Equivalent of `.claude/commands/repro.md`. Use when the operator says "that one
    - **LoRa airtime collision** — pass rate improves with fewer concurrent transmitters. Suggest a `time.sleep` gap or retry bump in the test body.
    - **PKI key staleness** — first attempt fails, subsequent ones pass; existing retry-loop pattern in `test_direct_with_ack.py` is the fix.
    - **NodeInfo cooldown** — `Skip send NodeInfo since we sent it <600s ago` in fail-only logs; needs a `broadcast_nodeinfo_ping()` warmup.
-   - **Hardware-specific** — one direction consistently fails, firmware versions differ, CP2102 driver wedged, etc.
+   - **Hardware-specific** — one direction consistently fails, firmware versions differ, CP2102 driver wedged, etc. For a device wedged past `touch_1200bps`, recommend `uhubctl_cycle(role=..., confirm=True)` to hard-power-cycle its hub port (requires `uhubctl` installed).
+   - **Device went dark mid-run** — fails from some iteration onward and never recovers; firmware log stops arriving. Almost always a Guru crash with frozen CDC. Recommend `uhubctl_cycle` before the next iteration; escalate to replug if that also fails.
    - **Unknown** — say so. Don't invent a root cause.
 
 7. **Report back** with:

.github/prompts/mcp-test.prompt.md

@@ -21,19 +21,25 @@ Equivalent of the Claude Code `/test` slash command in `.claude/commands/test.md
 
 2. **Read the pre-flight header** (first few lines of wrapper output). The `detected hub :` line lists role → port → env mappings. If it reads `(none)`, the wrapper narrowed to `tests/unit` only — call that out explicitly so the operator knows hardware tiers were skipped.
 
-3. **On pass**: one-line summary like `N passed, M skipped in <duration>`. Don't enumerate test names. DO mention any non-placeholder SKIPs (things like "role not present on hub") because they indicate missing hardware or setup issues.
+3. **On pass**: one-line summary like `N passed, M skipped in <duration>`. Don't enumerate test names. DO mention any non-placeholder SKIPs and name the cause:
+   - `"role not present on hub"` → device unplugged; operator should reconnect.
+   - `"firmware not baked with USERPREFS_UI_TEST_LOG"` → tests/ui skipped; the UI-log compile macro isn't in the baked firmware. Suggest `--force-bake`.
+   - `"uhubctl not installed"` → tests/recovery + `test_peer_offline_recovery` skipped. Suggest `brew install uhubctl` / `apt install uhubctl`.
+   - `"no PPPS-capable hubs detected"` → tests/recovery skipped because the attached hub doesn't support per-port power switching; won't run on that setup.
+   - `"opencv-python-headless is not installed"` → tests/ui auto-deselected by `run-tests.sh`. Suggest `pip install -e 'mcp-server/.[ui]'`.
 
 4. **On failure**: open `mcp-server/tests/report.html` (pytest-html output, self-contained) and extract the `Meshtastic debug` section for each failed test. That section includes a firmware log stream (last 200 lines) and device state dump. For each failure, summarise:
    - test name
    - one-line assertion message
    - the specific firmware log lines that explain why (look for `PKI_UNKNOWN_PUBKEY`, `Skip send NodeInfo`, `Error=`, `Guru Meditation`, `assertion failed`, `No suitable channel`)
+   - for UI-tier failures also check `mcp-server/tests/ui_captures/<session>/<test>/transcript.md` (per-step frame + OCR)
 
 5. **Classify each failure** as one of:
    - **Transient flake** — LoRa collision, first-attempt NAK with self-heal pattern, timing-sensitive assertion. Suggest `/mcp-repro <test-id>` to confirm.
-   - **Environmental** — device unreachable, port busy, CP2102 driver wedged on macOS. Suggest specific recovery (USB replug, `touch_1200bps`, `git status userPrefs.jsonc`).
+   - **Environmental** — device unreachable, port busy, CP2102 driver wedged on macOS. Suggest recovery in escalation order: (a) replug USB, (b) `touch_1200bps` + `pio_flash` for nRF52 DFU, (c) `uhubctl_cycle(role=..., confirm=True)` for a device wedged past DFU (needs `uhubctl` installed; `baked_single` does this once automatically when available). Also check `git status userPrefs.jsonc`.
    - **Regression** — same assertion fails repeatedly on re-runs, firmware log shows novel errors. Identify the firmware module likely responsible.
 
-6. **Do NOT run destructive recovery automatically**. If a failure looks like it needs a reflash, factory*reset, or replug — \_describe the steps* and let the operator decide. Never burn airtime or flash cycles without approval.
+6. **Do NOT run destructive recovery automatically**. If a failure looks like it needs a reflash, factory*reset, `uhubctl_cycle`, or replug — \_describe the steps* and let the operator decide. Never burn airtime or flash cycles without approval.
 
 ## Arguments convention
 

.github/prompts/new-module.prompt.md

@@ -118,7 +118,7 @@ CallbackObserver<MyModule, const meshtastic::Status *> statusObserver =
 
 Add test suite in `test/test_mymodule/`:
 
-```
+```text
 test/
 └── test_mymodule/
     └── test_main.cpp

.github/prompts/new-variant.prompt.md

@@ -6,7 +6,7 @@ Guide for adding a new Meshtastic hardware variant to the firmware.
 
 Create under `variants/<arch>/<name>/`:
 
-```
+```text
 variants/
 ├── esp32/          # ESP32
 ├── esp32s3/        # ESP32-S3

.trunk/trunk.yaml

@@ -8,15 +8,15 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.517
-    - renovate@43.110.9
-    - prettier@3.8.1
+    - checkov@3.2.524
+    - renovate@43.132.1
+    - prettier@3.8.3
     - trufflehog@3.94.3
     - yamllint@1.38.0
     - bandit@1.9.4
-    - trivy@0.69.3
+    - trivy@0.70.0
     - taplo@0.10.0
-    - ruff@0.15.9
+    - ruff@0.15.11
     - isort@8.0.1
     - markdownlint@0.48.0
     - oxipng@10.1.0

AGENTS.md

@@ -48,6 +48,15 @@ Three test-and-diagnose workflows exist as slash commands:
 
 Bodies live in `.claude/commands/` and `.github/prompts/` respectively. `.claude/commands/README.md` is the index.
 
+## Encryption at a glance
+
+Two layers, both in `src/mesh/CryptoEngine.cpp`:
+
+- **Channel (symmetric)** — **AES-CTR** with a channel-wide PSK (AES-128 or AES-256). Nonce = packet_id ‖ from_node ‖ block_counter. No AEAD; integrity is soft (channel-hash filter). The well-known default PSK lives in `src/mesh/Channels.h`; a 1-byte PSK is a short-form index into it.
+- **Per-peer PKI** — **X25519 ECDH** (Curve25519, 32-byte keys) → SHA-256 → **AES-256-CCM** with an 8-byte MAC. Fresh 32-bit `extraNonce` per packet, sent in the clear alongside the MAC. 12-byte wire overhead (`MESHTASTIC_PKC_OVERHEAD`). Used for DMs. Also used for remote admin (`src/modules/AdminModule.cpp`), where AdminMessage authorization is gated by `config.security.admin_key[0..2]`. Disabled entirely in Ham mode (`user.is_licensed=true`).
+
+Key rotation to never trigger casually: only the **full** factory reset (`factory_reset_device`, `eraseBleBonds=true`) wipes `security.private_key` and regenerates the keypair — every peer holds the old public key, so DMs silently fail PKI decrypt until NodeInfo re-exchanges. The **partial** config reset (`factory_reset_config`) preserves the private key and doesn't invalidate peer relationships. Explicitly blanking `security.private_key` via admin also triggers regen. See the **Encryption & Key Management** section of `.github/copilot-instructions.md` for the full spec (nonce layout, send/receive selection logic including infrastructure-portnum exceptions, admin-key + session-passkey authorization, `is_managed` scope, key-rotation hazards).
+
 ## House rules
 
 - **No destructive device operations without operator approval.** `factory_reset`, `erase_and_flash`, `reboot`, `shutdown`, history-rewriting git ops — describe the action and stop. Operator authorizes.
@@ -89,25 +98,42 @@ Sequence these; don't parallelize on the same port.
 
 ## Where to look
 
-| Path                              | What's there                                                                                         |
-| --------------------------------- | ---------------------------------------------------------------------------------------------------- |
-| `src/`                            | Firmware C++ source (`mesh/`, `modules/`, `platform/`, `graphics/`, `gps/`, `motion/`, `mqtt/`, …)   |
-| `src/mesh/`                       | Core: NodeDB, Router, Channels, CryptoEngine, radio interfaces, StreamAPI, PhoneAPI                  |
-| `src/modules/`                    | Feature modules; `Telemetry/Sensor/` has 50+ I2C sensor drivers                                      |
-| `variants/`                       | 200+ hardware variant definitions (`variant.h` + `platformio.ini` per board)                         |
-| `protobufs/`                      | `.proto` definitions; regenerate with `bin/regen-protos.sh`                                          |
-| `test/`                           | Firmware unit tests (12 suites; `pio test -e native`)                                                |
-| `mcp-server/`                     | Python MCP server + pytest hardware integration tests                                                |
-| `mcp-server/tests/`               | Tiered pytest suite: `unit/`, `mesh/`, `telemetry/`, `monitor/`, `fleet/`, `admin/`, `provisioning/` |
-| `.claude/commands/`               | Claude Code slash command bodies                                                                     |
-| `.github/prompts/`                | Copilot prompt bodies (mirrors of the Claude Code ones)                                              |
-| `.github/copilot-instructions.md` | **Primary agent instructions — read this**                                                           |
-| `.github/workflows/`              | CI pipelines                                                                                         |
-| `.mcp.json`                       | MCP server registration for Claude Code                                                              |
+| Path                              | What's there                                                                                                             |
+| --------------------------------- | ------------------------------------------------------------------------------------------------------------------------ |
+| `src/`                            | Firmware C++ source (`mesh/`, `modules/`, `platform/`, `graphics/`, `gps/`, `motion/`, `mqtt/`, …)                       |
+| `src/mesh/`                       | Core: NodeDB, Router, Channels, CryptoEngine, radio interfaces, StreamAPI, PhoneAPI                                      |
+| `src/modules/`                    | Feature modules; `Telemetry/Sensor/` has 50+ I2C sensor drivers                                                          |
+| `variants/`                       | 200+ hardware variant definitions (`variant.h` + `platformio.ini` per board)                                             |
+| `protobufs/`                      | `.proto` definitions; regenerate with `bin/regen-protos.sh`                                                              |
+| `test/`                           | Firmware unit tests (12 suites; `pio test -e native`)                                                                    |
+| `mcp-server/`                     | Python MCP server + pytest hardware integration tests                                                                    |
+| `mcp-server/tests/`               | Tiered pytest suite: `unit/`, `mesh/`, `telemetry/`, `monitor/`, `recovery/`, `ui/`, `fleet/`, `admin/`, `provisioning/` |
+| `.claude/commands/`               | Claude Code slash command bodies                                                                                         |
+| `.github/prompts/`                | Copilot prompt bodies (mirrors of the Claude Code ones)                                                                  |
+| `.github/copilot-instructions.md` | **Primary agent instructions — read this**                                                                               |
+| `.github/workflows/`              | CI pipelines                                                                                                             |
+| `.mcp.json`                       | MCP server registration for Claude Code                                                                                  |
 
 ## Recovery one-liners
 
 - **`userPrefs.jsonc` dirty after a test run?** Re-run `./mcp-server/run-tests.sh` once (pre-flight self-heals from the sidecar). If still dirty: `git checkout userPrefs.jsonc`.
 - **nRF52 not responding?** `mcp__meshtastic__touch_1200bps(port=...)` drops it into the DFU bootloader, then `pio_flash` re-installs.
+- **Device fully wedged (no DFU)?** `mcp__meshtastic__uhubctl_cycle(role="nrf52", confirm=True)` hard-power-cycles it via USB hub PPPS. Needs `uhubctl` installed (`brew install uhubctl` / `apt install uhubctl`); on Linux without udev rules, permission errors fail fast, so use `sudo uhubctl` yourself or configure udev access.
 - **Port busy?** `lsof <port>` to find the holder. Usually a stale `pio device monitor` or zombie `meshtastic_mcp` process. Kill it.
 - **Multiple MCP servers running?** `ps aux | grep meshtastic_mcp` — zombies hold ports. Kill all but the one your host spawned.
+
+## Environment variables (test harness)
+
+| Var                                  | Purpose                                                                                                                                        |
+| ------------------------------------ | ---------------------------------------------------------------------------------------------------------------------------------------------- |
+| `MESHTASTIC_MCP_ENV_<ROLE>`          | Override PlatformIO env for a role (e.g. `MESHTASTIC_MCP_ENV_NRF52=rak4631-dap`). Default map: `nrf52→rak4631`, `esp32s3→heltec-v3`.           |
+| `MESHTASTIC_MCP_SEED`                | PSK seed for the session test profile. Defaults to `mcp-<user>-<host>`.                                                                        |
+| `MESHTASTIC_MCP_FLASH_LOG`           | File path to tee pio/esptool/nrfutil/picotool output. `run-tests.sh` sets this to `tests/flash.log` so the TUI can stream live flash progress. |
+| `MESHTASTIC_UHUBCTL_BIN`             | Absolute path to `uhubctl` binary. Default: PATH lookup.                                                                                       |
+| `MESHTASTIC_UHUBCTL_LOCATION_<ROLE>` | Pin a role to a specific uhubctl hub location (e.g. `1-1.3`). Wins over VID auto-detection — use when multiple devices share a VID.            |
+| `MESHTASTIC_UHUBCTL_PORT_<ROLE>`     | Pin a role to a specific hub port number. Required alongside `LOCATION_<ROLE>`.                                                                |
+| `MESHTASTIC_UI_CAMERA_BACKEND`       | Camera backend for UI tier + `capture_screen` tool: `opencv` / `ffmpeg` / `null` / `auto` (default).                                           |
+| `MESHTASTIC_UI_CAMERA_DEVICE`        | Generic camera device (index or path). Used by the UI tier when no per-role var is set.                                                        |
+| `MESHTASTIC_UI_CAMERA_DEVICE_<ROLE>` | Per-role camera pinning (e.g. `MESHTASTIC_UI_CAMERA_DEVICE_ESP32S3=0` for the OLED-bearing heltec-v3).                                         |
+| `MESHTASTIC_UI_OCR_BACKEND`          | OCR engine selection: `easyocr` / `pytesseract` / `null` / `auto` (default).                                                                   |
+| `MESHTASTIC_UI_TUI_CAMERA`           | Set to `1` to mount the live camera-feed panel in `meshtastic-mcp-test-tui`.                                                                   |

Dockerfile

@@ -14,7 +14,7 @@ RUN apt-get update && apt-get install --no-install-recommends -y \
         curl wget g++ zip git ca-certificates pkg-config \
         libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
         libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
-        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev libsdl2-dev \
+        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev libsdl2-dev libnotify-dev \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware
@@ -53,7 +53,7 @@ USER root
 RUN apt-get update && apt-get --no-install-recommends -y install \
         libc-bin libc6 libgpiod3 libyaml-cpp0.8 libi2c0 libuv1t64 libusb-1.0-0-dev \
         liborcania2.3 libulfius2.7t64 libssl3t64 \
-        libx11-6 libinput10 libxkbcommon-x11-0 libsdl2-2.0-0 \
+        libx11-6 libinput10 libxkbcommon-x11-0 libsdl2-2.0-0 libnotify4 \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \

Dockerfile.test

@@ -9,7 +9,7 @@ RUN apt-get update && apt-get install --no-install-recommends -y \
         g++ git ca-certificates pkg-config \
         libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
         libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
-        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev libsdl2-dev \
+        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev libsdl2-dev libnotify-dev \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && pip install --no-cache-dir platformio==6.1.19 \
         && useradd --create-home --shell /usr/sbin/nologin meshtastic

alpine.Dockerfile

@@ -11,7 +11,7 @@ RUN apk --no-cache add \
         bash g++ libstdc++-dev linux-headers zip git ca-certificates libbsd-dev \
         libgpiod-dev yaml-cpp-dev bluez-dev \
         libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
-        libx11-dev libinput-dev libxkbcommon-dev sqlite-dev sdl2-dev \
+        libx11-dev libinput-dev libxkbcommon-dev sqlite-dev sdl2-dev libnotify-dev \
     && rm -rf /var/cache/apk/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware
@@ -42,7 +42,7 @@ USER root
 
 RUN apk --no-cache add \
         shadow libstdc++ libbsd libgpiod yaml-cpp libusb \
-        i2c-tools libuv libx11 libinput libxkbcommon sdl2 \
+        i2c-tools libuv libx11 libinput libxkbcommon sdl2 libnotify \
     && rm -rf /var/cache/apk/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \

debian/control

@@ -27,7 +27,8 @@ Build-Depends: debhelper-compat (= 13),
                libinput-dev,
                libxkbcommon-x11-dev,
                libsqlite3-dev,
-               libsdl2-dev
+               libsdl2-dev,
+               libnotify-dev
 Standards-Version: 4.6.2
 Homepage: https://github.com/meshtastic/firmware
 Rules-Requires-Root: no

debian/meshtasticd.install

@@ -7,3 +7,5 @@ bin/meshtasticd.service            lib/systemd/system
 bin/meshtasticd-start.sh           usr/bin
 
 web/*                              usr/share/meshtasticd/web
+
+bin/org.meshtastic.meshtasticd.svg usr/share/icons/hicolor/scalable/apps

mcp-server/.gitignore

@@ -24,3 +24,6 @@ tests/.tui-runs
 tests/.history/
 # Reproducer bundles (TUI `x` export on failed tests).
 tests/reproducers/
+# UI-tier camera captures + per-test transcripts. Regenerated every run;
+# left on disk for human review between runs.
+tests/ui_captures/

mcp-server/README.md

@@ -61,7 +61,7 @@ Replace `<firmware-repo>` with the absolute path, e.g. `/Users/you/GitHub/firmwa
 
 Same `mcpServers` block, but in `~/Library/Application Support/Claude/claude_desktop_config.json` (macOS) or `%APPDATA%\Claude\claude_desktop_config.json` (Windows).
 
-## Tools (38)
+## Tools (43)
 
 ### Discovery & metadata
 
@@ -130,6 +130,34 @@ _The tool tables below document 38 currently registered MCP server tools._
 | `picotool_load`       | Load a UF2                                                |
 | `picotool_raw`        | Pass-through                                              |
 
+### USB power control (uhubctl)
+
+| Tool            | What it does                                                |
+| --------------- | ----------------------------------------------------------- |
+| `uhubctl_list`  | Enumerate USB hubs + attached-device VID/PID (read-only)    |
+| `uhubctl_power` | Drive a hub port `on` or `off`; `off` requires confirm=True |
+| `uhubctl_cycle` | Off → wait `delay_s` → on; confirm=True required            |
+
+Target a port by explicit `(location, port)` (raw uhubctl syntax like
+`location="1-1.3", port=2`) or by `role` (`"nrf52"`, `"esp32s3"`). Role
+lookup checks `MESHTASTIC_UHUBCTL_LOCATION_<ROLE>` +
+`MESHTASTIC_UHUBCTL_PORT_<ROLE>` env vars first, then auto-detects via VID
+against `uhubctl`'s output.
+
+Requires [`uhubctl`](https://github.com/mvp/uhubctl) on PATH:
+
+```bash
+brew install uhubctl        # macOS
+apt install uhubctl         # Debian/Ubuntu
+```
+
+Modern macOS + PPPS-capable hubs generally work without root. On Linux
+without udev rules, or on old macOS with driver quirks, you may need
+`sudo`. If uhubctl returns a permission error the MCP tool raises a
+clear `UhubctlError` pointing at the
+[udev-rules / sudo fallback](https://github.com/mvp/uhubctl#linux-usb-permissions)
+rather than auto-`sudo`'ing mid-run.
+
 ## Safety
 
 - **All destructive flash/admin tools require `confirm=True`** as a tool-level gate, on top of any permission prompt from Claude.
@@ -182,10 +210,22 @@ in the pre-flight header.
 - **`unit`** — pure Python, no hardware. boards / PIO wrapper /
   userPrefs-parse / testing-profile fixtures.
 - **`mesh`** — 2-device mesh: formation, broadcast delivery, direct+ACK,
-  traceroute, bidirectional. Parametrized over both directions.
+  traceroute, bidirectional. Parametrized over both directions. Includes
+  `test_peer_offline_recovery` which uses uhubctl to power-cycle one peer
+  mid-conversation and verifies the mesh recovers (skips without uhubctl).
 - **`telemetry`** — periodic telemetry broadcast + on-demand request/reply
   (`TELEMETRY_APP` with `wantResponse=True`).
 - **`monitor`** — boot log has no panic markers within 60 s of reboot.
+- **`recovery`** — `uhubctl` power-cycle round-trip: verifies the hub port
+  can be toggled off/on, the device re-enumerates with the same
+  `my_node_num`, and NVS-resident config (region, channel, modem preset)
+  survives a hard reset. Requires `uhubctl` on PATH; skips cleanly otherwise.
+- **`ui`** — input-broker-driven screen navigation (`AdminMessage.send_input_event`
+  injection → `Screen::handleInputEvent` → frame transition). Parametrized
+  on the screen-bearing role (heltec-v3 OLED). Captures images via USB
+  webcam + OCRs them for HTML-report evidence. Requires `pip install -e '.[ui]'`
+  and `MESHTASTIC_UI_CAMERA_DEVICE_ESP32S3=<index>`; tier is auto-deselected
+  if `cv2` isn't importable.
 - **`fleet`** — PSK-seed isolation: two labs with different seeds never
   overlap.
 - **`admin`** — owner persistence across reboot, channel URL round-trip,
@@ -193,6 +233,42 @@ in the pre-flight header.
 - **`provisioning`** — region/channel baking, userPrefs survive
   `factory_reset(full=False)`.
 
+#### UI tier setup
+
+The `tests/ui/` tier drives the on-device OLED via the firmware's existing
+`AdminMessage.send_input_event` RPC (no firmware changes required) and
+verifies transitions via a macro-gated log line + camera + OCR. Summary:
+
+1. Install extras: `pip install -e 'mcp-server/.[ui]'` — pulls in
+   `opencv-python-headless`, `numpy`, `easyocr`, `Pillow`. First easyocr
+   run downloads ~100 MB of models to `~/.EasyOCR/`; an autouse session
+   fixture pre-warms the reader so per-test OCR is <100 ms after that.
+2. Point a USB webcam at the heltec-v3 OLED. Discover its index:
+   ```bash
+   .venv/bin/python -c "import cv2; [print(i, cv2.VideoCapture(i).read()[0]) for i in range(5)]"
+   ```
+3. Export the per-role device env var:
+   ```bash
+   export MESHTASTIC_UI_CAMERA_DEVICE_ESP32S3=0
+   ```
+4. Run:
+   ```bash
+   ./run-tests.sh tests/ui -v
+   ```
+   Captures land under `tests/ui_captures/<session_seed>/<test_id>/`, one
+   PNG + `.ocr.txt` per `frame_capture()` call, with a per-test
+   `transcript.md` stepping through event → frame → OCR. The HTML report
+   embeds the full image strip inline (pass or fail).
+
+On macOS, `cv2.VideoCapture(0)` triggers the TCC Camera permission prompt
+on first use. Pre-grant Terminal (or your IDE's terminal) before running.
+The `OpenCVBackend` fails fast on 10 consecutive black frames so a silent
+permission denial surfaces as a clear error, not an empty PNG strip.
+
+No camera? Set `MESHTASTIC_UI_CAMERA_BACKEND=null` (or leave the device var
+unset). Tests still exercise the event-injection path and log assertions;
+captures just become 1×1 black PNGs.
+
 ### Artifacts (regenerated every run, under `tests/`)
 
 - `report.html` — self-contained pytest-html report. Each test gets a
@@ -217,6 +293,14 @@ Key bindings: `r` re-run focused, `f` filter, `d` failure detail, `g` open
 `report.html`, `x` export reproducer bundle, `l` cycle fw-log filter, `q`
 quit (SIGINT → SIGTERM → SIGKILL escalation).
 
+Set `MESHTASTIC_UI_TUI_CAMERA=1` to mount a bottom-of-screen **UI camera**
+panel. Left side: the latest capture PNG rendered as Unicode half-blocks
+(via `rich-pixels`, works in any terminal — no kitty/sixel required).
+Right side: live transcript tail ("step 3 — frame 4/8 name=nodelist_nodes
+— OCR: Nodes 2/2") so you can see every event-injection and its result
+as each UI test runs. Requires the `[ui]` extras for image rendering; the
+transcript alone works without them.
+
 ### Slash commands
 
 Three AI-assisted workflows are wired up for Claude Code operators

mcp-server/pyproject.toml

@@ -23,6 +23,21 @@ test = [
   # consumers; revisit if install cost pushes back.
   "textual>=0.50",
 ]
+# UI test tier + `capture_screen` MCP tool. Optional because the ML OCR
+# model alone is ~100 MB and camera hardware is user-supplied.
+#   pip install -e '.[ui]'     — full (OpenCV + easyocr)
+#   pip install -e '.[ui-min]' — image capture only, no OCR
+ui = [
+  "opencv-python-headless>=4.9",
+  "numpy>=1.26",
+  "easyocr>=1.7",
+  "Pillow>=10.0",
+  # Renders the latest camera capture as Unicode half-blocks in the TUI
+  # (MESHTASTIC_UI_TUI_CAMERA=1). Terminal-agnostic — no kitty / sixel
+  # dependency. Pure Python, tiny.
+  "rich-pixels>=3.0",
+]
+ui-min = ["opencv-python-headless>=4.9", "numpy>=1.26"]
 
 [project.scripts]
 meshtastic-mcp = "meshtastic_mcp.__main__:main"

mcp-server/run-tests.sh

@@ -217,6 +217,40 @@ if [[ $# -eq 0 ]]; then
 		-v --tb=short
 fi
 
+# UI tier requires opencv-python-headless (and ideally easyocr). If it's
+# not installed, auto-deselect tests/ui so operators without the [ui]
+# extra still get a green run. Printed in yellow; silent when cv2 is
+# present.
+_cv2_ok=0
+if "$VENV_PY" -c "import cv2" >/dev/null 2>&1; then
+	_cv2_ok=1
+fi
+_running_ui=0
+for _arg in "$@"; do
+	case "$_arg" in
+	*tests/ui* | tests/) _running_ui=1 ;;
+	*) ;;
+	esac
+done
+if [[ $_running_ui -eq 1 && $_cv2_ok -eq 0 ]]; then
+	printf '\033[33m[pre-flight] tests/ui tier detected, but opencv-python-headless is not installed — deselecting.\033[0m\n'
+	printf '             install with: .venv/bin/pip install -e "mcp-server/.[ui]"\n'
+	echo
+	set -- "$@" --ignore=tests/ui
+fi
+
+# Recovery tier needs `uhubctl` on PATH — it power-cycles devices via USB
+# hub PPPS. The tier's conftest already skips cleanly, so this is just a
+# friendly heads-up before the skip happens. `baked_single`'s auto-
+# recovery hook also benefits from having uhubctl available across the
+# whole suite.
+if ! command -v uhubctl >/dev/null 2>&1; then
+	printf "\033[33m[pre-flight] uhubctl not found on PATH — recovery tier will skip, and\n"
+	printf "             wedged-device auto-recovery is disabled.\033[0m\n"
+	printf "             install with: brew install uhubctl (macOS) or apt install uhubctl (Debian/Ubuntu).\n"
+	echo
+fi
+
 # Always emit `tests/reportlog.jsonl` (unless the operator explicitly passed
 # their own `--report-log=...`). Consumers — notably the
 # `meshtastic-mcp-test-tui` TUI — tail the reportlog for live per-test state.

mcp-server/src/meshtastic_mcp/admin.py

@@ -356,6 +356,46 @@ def shutdown(
     return {"ok": True, "shutting_down_in_s": seconds}
 
 
+def send_input_event(
+    event_code: int | str,
+    kb_char: int = 0,
+    touch_x: int = 0,
+    touch_y: int = 0,
+    port: str | None = None,
+) -> dict[str, Any]:
+    """Inject an InputBroker event (button press / key / gesture) into the UI.
+
+    Wraps `AdminMessage.send_input_event` (handled in firmware at
+    src/modules/AdminModule.cpp::handleSendInputEvent). Local-only — no PKI
+    warmup needed since the admin message is addressed to `my_node_num`.
+
+    `event_code` accepts an int, a case-insensitive name
+    (`"RIGHT"` / `"input_broker_right"`), or an `InputEventCode`. The
+    firmware-side enum lives in src/input/InputBroker.h and is mirrored in
+    `meshtastic_mcp.input_events`.
+    """
+    from meshtastic.protobuf import admin_pb2  # type: ignore[import-untyped]
+
+    from .input_events import coerce_event_code
+
+    code = coerce_event_code(event_code)
+    if not 0 <= kb_char <= 255:
+        raise ValueError(f"kb_char out of u8 range: {kb_char}")
+    if not 0 <= touch_x <= 65535:
+        raise ValueError(f"touch_x out of u16 range: {touch_x}")
+    if not 0 <= touch_y <= 65535:
+        raise ValueError(f"touch_y out of u16 range: {touch_y}")
+
+    with connect(port=port) as iface:
+        msg = admin_pb2.AdminMessage()
+        msg.send_input_event.event_code = code
+        msg.send_input_event.kb_char = kb_char
+        msg.send_input_event.touch_x = touch_x
+        msg.send_input_event.touch_y = touch_y
+        iface.localNode._sendAdmin(msg)
+    return {"ok": True, "event_code": code, "kb_char": kb_char}
+
+
 def factory_reset(
     port: str | None = None, confirm: bool = False, full: bool = False
 ) -> dict[str, Any]:

mcp-server/src/meshtastic_mcp/camera.py

@@ -0,0 +1,286 @@
+"""Cross-platform USB-webcam capture for UI tests + the `capture_screen` tool.
+
+Backends:
+- `opencv` — cv2.VideoCapture (AVFoundation on macOS, V4L2 on Linux).
+- `ffmpeg` — subprocess shelling out to the system `ffmpeg` binary. Slower
+  per frame, but zero Python deps beyond stdlib.
+- `null` — no-op stub returning a 1×1 black PNG. Used when no camera is
+  configured; keeps code paths alive without forcing every operator to
+  hook up hardware.
+
+Environment variables (read at `get_camera()` call time):
+- `MESHTASTIC_UI_CAMERA_BACKEND` — one of `opencv` / `ffmpeg` / `null` /
+  `auto` (default). `auto` picks opencv if `cv2` imports, else ffmpeg if
+  `ffmpeg --version` resolves, else null.
+- `MESHTASTIC_UI_CAMERA_DEVICE` — generic default (index or path).
+- `MESHTASTIC_UI_CAMERA_DEVICE_<ROLE>` — per-role override, e.g.
+  `MESHTASTIC_UI_CAMERA_DEVICE_ESP32S3=0` for the OLED-bearing heltec-v3.
+  Role suffix is uppercased before lookup.
+
+Dependencies land in the optional `[ui]` extra; imports are lazy so clients
+without `opencv-python-headless` installed can still import this module.
+"""
+
+from __future__ import annotations
+
+import io
+import os
+import shutil
+import subprocess
+import sys
+import time
+import warnings
+from pathlib import Path
+from typing import Protocol
+
+
+class CameraError(RuntimeError):
+    """Raised when a camera backend fails to initialize or capture."""
+
+
+class CameraBackend(Protocol):
+    name: str
+
+    def capture(self) -> bytes:
+        """Return one PNG-encoded frame."""
+        ...
+
+    def close(self) -> None: ...
+
+
+# ---------- OpenCV backend -------------------------------------------------
+
+
+class OpenCVBackend:
+    name = "opencv"
+
+    def __init__(self, device: int | str, warmup_frames: int = 5) -> None:
+        try:
+            import cv2  # type: ignore[import-untyped]  # noqa: PLC0415
+        except ImportError as exc:
+            raise CameraError(
+                "opencv backend requested but `cv2` is not installed. "
+                "Install the mcp-server [ui] extra: pip install -e '.[ui]'"
+            ) from exc
+
+        self._cv2 = cv2
+        device_arg: int | str
+        if isinstance(device, str) and device.isdigit():
+            device_arg = int(device)
+        else:
+            device_arg = device
+        self._cap = cv2.VideoCapture(device_arg)
+        if not self._cap.isOpened():
+            raise CameraError(
+                f"cv2.VideoCapture({device_arg!r}) failed to open. "
+                "On macOS check TCC Camera permission; on Linux check /dev/video* and v4l2 access."
+            )
+
+        # Drop the first few frames — auto-exposure + white-balance settle.
+        for _ in range(warmup_frames):
+            self._cap.read()
+        # Detect a stuck black-frame camera early rather than silently
+        # producing all-black captures.
+        ok, frame = self._cap.read()
+        if not ok or frame is None:
+            self._cap.release()
+            raise CameraError(f"camera {device_arg!r} opened but returned no frames")
+
+    def capture(self) -> bytes:
+        cv2 = self._cv2
+        ok, frame = self._cap.read()
+        if not ok or frame is None:
+            raise CameraError("cv2.VideoCapture.read() returned no frame")
+        success, buf = cv2.imencode(".png", frame)
+        if not success:
+            raise CameraError("cv2.imencode('.png', ...) failed")
+        return bytes(buf)
+
+    def close(self) -> None:
+        try:
+            self._cap.release()
+        except Exception:  # noqa: BLE001
+            pass
+
+
+# ---------- ffmpeg subprocess backend --------------------------------------
+
+
+class FfmpegBackend:
+    name = "ffmpeg"
+
+    def __init__(self, device: int | str) -> None:
+        if shutil.which("ffmpeg") is None:
+            raise CameraError("ffmpeg backend requested but `ffmpeg` is not on PATH")
+
+        self._device = str(device)
+        # Platform-specific -f flag:
+        #   macOS → avfoundation (index like "0")
+        #   Linux → v4l2        (device like "/dev/video0" or "0")
+        if sys.platform == "darwin":
+            self._input_format = "avfoundation"
+            self._input_spec = self._device  # bare index for avfoundation
+        else:
+            self._input_format = "v4l2"
+            self._input_spec = (
+                self._device
+                if self._device.startswith("/dev/")
+                else f"/dev/video{self._device}"
+            )
+
+    def capture(self) -> bytes:
+        cmd = [
+            "ffmpeg",
+            "-hide_banner",
+            "-loglevel",
+            "error",
+            "-f",
+            self._input_format,
+            "-i",
+            self._input_spec,
+            "-frames:v",
+            "1",
+            "-f",
+            "image2pipe",
+            "-vcodec",
+            "png",
+            "-",
+        ]
+        try:
+            out = subprocess.run(
+                cmd, capture_output=True, check=True, timeout=15  # noqa: S603
+            )
+        except subprocess.CalledProcessError as exc:
+            raise CameraError(
+                f"ffmpeg capture failed (rc={exc.returncode}): {exc.stderr.decode(errors='replace')[:200]}"
+            ) from exc
+        except subprocess.TimeoutExpired as exc:
+            raise CameraError("ffmpeg capture timed out after 15s") from exc
+        return out.stdout
+
+    def close(self) -> None:
+        pass  # stateless — each capture spawns a new process
+
+
+# ---------- Null backend ---------------------------------------------------
+
+
+# A tiny valid 1×1 transparent PNG so callers always get a decodable image.
+_BLACK_1X1_PNG = bytes.fromhex(
+    "89504e470d0a1a0a0000000d49484452000000010000000108060000001f15c489"
+    "0000000d49444154789c6300010000000500010d0a2db40000000049454e44ae426082"
+)
+
+
+class NullBackend:
+    name = "null"
+
+    def capture(self) -> bytes:
+        return _BLACK_1X1_PNG
+
+    def close(self) -> None:
+        pass
+
+
+# ---------- Factory --------------------------------------------------------
+
+
+def _resolve_device(role: str | None) -> str | None:
+    if role:
+        specific = os.environ.get(f"MESHTASTIC_UI_CAMERA_DEVICE_{role.upper()}")
+        if specific:
+            return specific
+    return os.environ.get("MESHTASTIC_UI_CAMERA_DEVICE")
+
+
+def get_camera(role: str | None = None) -> CameraBackend:
+    """Return a CameraBackend for the given device role (e.g. `"esp32s3"`).
+
+    Falls back to `NullBackend` if no camera is configured or the selected
+    backend fails to init — tests should treat captures as best-effort
+    evidence, not a blocker.
+    """
+    backend = os.environ.get("MESHTASTIC_UI_CAMERA_BACKEND", "auto").lower()
+    device = _resolve_device(role)
+
+    if backend in ("null", "none") or device is None:
+        return NullBackend()
+
+    if backend == "auto":
+        # Prefer opencv if importable; fall back to ffmpeg; else null.
+        try:
+            import cv2  # type: ignore[import-untyped]  # noqa: F401,PLC0415
+
+            backend = "opencv"
+        except ImportError:
+            backend = "ffmpeg" if shutil.which("ffmpeg") else "null"
+
+    if backend == "opencv":
+        try:
+            return OpenCVBackend(device)
+        except CameraError as exc:
+            warnings.warn(
+                f"camera backend {backend!r} failed to initialize for device "
+                f"{device!r}: {exc}; falling back to null backend",
+                RuntimeWarning,
+                stacklevel=2,
+            )
+            return NullBackend()
+    if backend == "ffmpeg":
+        try:
+            return FfmpegBackend(device)
+        except CameraError as exc:
+            warnings.warn(
+                f"camera backend {backend!r} failed to initialize for device "
+                f"{device!r}: {exc}; falling back to null backend",
+                RuntimeWarning,
+                stacklevel=2,
+            )
+            return NullBackend()
+    if backend == "null":
+        return NullBackend()
+
+    raise CameraError(f"unknown MESHTASTIC_UI_CAMERA_BACKEND: {backend!r}")
+
+
+def save_capture(png_bytes: bytes, path: Path) -> None:
+    path.parent.mkdir(parents=True, exist_ok=True)
+    path.write_bytes(png_bytes)
+
+
+def capture_to_file(role: str | None, path: Path) -> dict[str, object]:
+    """One-shot: open camera, capture, write PNG, close. Returns metadata."""
+    started = time.monotonic()
+    cam = get_camera(role)
+    try:
+        data = cam.capture()
+    finally:
+        cam.close()
+    save_capture(data, path)
+    return {
+        "backend": cam.name,
+        "path": str(path),
+        "bytes": len(data),
+        "elapsed_s": round(time.monotonic() - started, 3),
+    }
+
+
+def _is_png(data: bytes) -> bool:
+    return data.startswith(b"\x89PNG\r\n\x1a\n")
+
+
+# Exposed so callers can sanity-check a capture without a full PIL import.
+__all__ = [
+    "CameraBackend",
+    "CameraError",
+    "FfmpegBackend",
+    "NullBackend",
+    "OpenCVBackend",
+    "capture_to_file",
+    "get_camera",
+    "save_capture",
+]
+
+# Keep `io` import used (pyflakes is picky) via a small guard used at import
+# time to normalize stdin/stdout if a subclass ever needs it.
+_ = io.BytesIO  # noqa: SLF001

mcp-server/src/meshtastic_mcp/cli/_uicap.py

@@ -0,0 +1,83 @@
+"""UI-capture transcript tailer for ``meshtastic-mcp-test-tui``.
+
+Watches ``tests/ui_captures/<session_seed>/`` for new transcript lines
+(one per ``frame_capture()`` call from the UI tier) and posts them to
+the TUI. Enabled by ``MESHTASTIC_UI_TUI_CAMERA=1``.
+
+Design mirrors ``_flashlog.py``:
+- Daemon thread, cooperative stop via ``threading.Event``.
+- Tolerates the captures directory not existing yet (UI tier hasn't run).
+- Per-file seek state so we only forward genuinely-new lines.
+"""
+
+from __future__ import annotations
+
+import pathlib
+import threading
+import time
+from typing import Callable
+
+
+class UiCaptureTailer(threading.Thread):
+    """Recursively watch a captures root for new `transcript.md` lines.
+
+    Invokes ``post(test_id, line)`` for each new line, where ``test_id``
+    is derived from the path — the sanitized nodeid directory name.
+    """
+
+    def __init__(
+        self,
+        root: pathlib.Path,
+        post: Callable[[str, str], None],
+        stop: threading.Event,
+        *,
+        poll_interval: float = 0.5,
+    ) -> None:
+        super().__init__(daemon=True, name="uicap-tail")
+        self._root = root
+        self._post = post
+        self._stop = stop
+        self._poll_interval = poll_interval
+        # path → byte offset we've already read through
+        self._offsets: dict[pathlib.Path, int] = {}
+
+    def run(self) -> None:
+        while not self._stop.is_set():
+            try:
+                self._scan_once()
+            except Exception:
+                # Best-effort tailer — never bring down the TUI because a
+                # directory vanished mid-scan.
+                pass
+            time.sleep(self._poll_interval)
+
+    def _scan_once(self) -> None:
+        if not self._root.is_dir():
+            return
+        for transcript in self._root.rglob("transcript.md"):
+            test_id = transcript.parent.name
+            offset = self._offsets.get(transcript, 0)
+            try:
+                size = transcript.stat().st_size
+            except OSError:
+                continue
+            if size < offset:
+                # File truncated / rewritten — reset and re-emit.
+                offset = 0
+            if size == offset:
+                continue
+            try:
+                with transcript.open("rb") as fh:
+                    fh.seek(offset)
+                    chunk = fh.read(size - offset).decode("utf-8", errors="replace")
+            except OSError:
+                continue
+            for line in chunk.splitlines():
+                line = line.rstrip()
+                if not line or line.startswith("#"):
+                    continue
+                try:
+                    self._post(test_id, line)
+                except Exception:
+                    return
+            self._offsets[transcript] = size

mcp-server/src/meshtastic_mcp/cli/test_tui.py

@@ -518,6 +518,7 @@ def _build_app(
     from . import _fwlog as _fwlog_mod
     from . import _history as _history_mod
     from . import _reproducer as _reproducer_mod
+    from . import _uicap as _uicap_mod
 
     # ---------------- Messages ----------------
 
@@ -548,6 +549,16 @@ def _build_app(
             self.line = line
             super().__init__()
 
+    class UiCaptureLine(tx.Message):
+        """Live line from the UI-tier camera transcript — one per
+        `frame_capture()` call. Posted only when the camera panel is
+        enabled via `MESHTASTIC_UI_TUI_CAMERA=1`."""
+
+        def __init__(self, test_id: str, line: str) -> None:
+            self.test_id = test_id
+            self.line = line
+            super().__init__()
+
     class DeviceSnapshot(tx.Message):
         def __init__(self, rows: list[DeviceRow]) -> None:
             self.rows = rows
@@ -871,6 +882,10 @@ def _build_app(
         #pytest-pane { height: 50%; border-bottom: solid $primary-background; }
         #fwlog-header { height: 1; padding: 0 1; background: $panel; }
         #fwlog-pane { height: 1fr; }
+        #uicap-header { height: 1; padding: 0 1; background: $boost; }
+        #uicap-pane { height: 14; border-top: solid $primary-background; }
+        #uicap-image { width: 36; border-right: solid $primary-background; padding: 0 1; }
+        #uicap-log { width: 1fr; height: 14; }
         Tree { height: 100%; }
         RichLog { height: 100%; }
         #device-table { height: auto; max-height: 6; }
@@ -912,6 +927,11 @@ def _build_app(
             self._device_worker: DevicePollerWorker | None = None
             self._fwlog_worker: _fwlog_mod.FirmwareLogTailer | None = None
             self._flashlog_worker: _flashlog_mod.FlashLogTailer | None = None
+            self._uicap_worker: _uicap_mod.UiCaptureTailer | None = None
+            # Env-gated; only mounts the UI-capture panel when operator asks for it.
+            self._ui_camera_enabled = bool(
+                int(os.environ.get("MESHTASTIC_UI_TUI_CAMERA", "0") or "0")
+            )
             self._tree_filter: str = ""
             self._sigint_count = 0
             # Firmware-log port filter: None = all, else exact port match.
@@ -959,6 +979,22 @@ def _build_app(
                             wrap=True,
                             max_lines=5000,
                         )
+                    if self._ui_camera_enabled:
+                        yield tx.Static(
+                            "UI camera — latest capture + transcript   (MESHTASTIC_UI_TUI_CAMERA=1)",
+                            id="uicap-header",
+                        )
+                        with tx.Horizontal(id="uicap-pane"):
+                            yield tx.Static(
+                                "(waiting…)", id="uicap-image", markup=False
+                            )
+                            yield tx.RichLog(
+                                id="uicap-log",
+                                highlight=False,
+                                markup=False,
+                                wrap=True,
+                                max_lines=500,
+                            )
             yield tx.DataTable(id="device-table", show_cursor=False)
             yield tx.Footer()
 
@@ -1023,6 +1059,21 @@ def _build_app(
                 stop=self._stop,
             )
             self._flashlog_worker.start()
+            # UI-capture transcript tailer — only runs when the camera panel
+            # is enabled. Watches tests/ui_captures/**/transcript.md for new
+            # lines as UI tests execute.
+            if self._ui_camera_enabled:
+                captures_root = self._root / "mcp-server" / "tests" / "ui_captures"
+                # When the TUI is launched from inside mcp-server (the usual
+                # case), `self._root` is already mcp-server/, so adjust:
+                if not captures_root.parent.name == "mcp-server":
+                    captures_root = self._root / "tests" / "ui_captures"
+                self._uicap_worker = _uicap_mod.UiCaptureTailer(
+                    root=captures_root,
+                    post=lambda tid, line: self.post_message(UiCaptureLine(tid, line)),
+                    stop=self._stop,
+                )
+                self._uicap_worker.start()
             self._spawn_pytest(self._pytest_args)
             # Header tick (seed / runtime / sparkline re-renders at 1 Hz).
             # Also refreshes the device-status column so the per-test elapsed
@@ -1217,6 +1268,84 @@ def _build_app(
             log = self.query_one("#pytest-log", tx.RichLog)
             log.write(f"[flash] {message.line}")
 
+        def on_ui_capture_line(self, message: Any) -> None:
+            """Route a UI-capture transcript line into the camera panel.
+
+            Each line is already formatted by frame_capture — e.g.
+            `1. **initial** — frame 2/8 name=home — OCR: ...`. We write
+            the text into the RichLog AND try to render the corresponding
+            PNG on the left side (requires rich-pixels, Pillow).
+            """
+            if not self._ui_camera_enabled:
+                return
+            try:
+                log_panel = self.query_one("#uicap-log", tx.RichLog)
+            except Exception:
+                return
+            log_panel.write(f"[{message.test_id}] {message.line}")
+            self._render_latest_ui_capture(message.test_id, message.line)
+
+        def _render_latest_ui_capture(self, test_id: str, line: str) -> None:
+            """Find the PNG that corresponds to `line` and render it on the
+            left of the uicap pane. Soft-fails if rich-pixels isn't
+            installed or the PNG isn't found — operator still has the text
+            transcript on the right.
+            """
+            try:
+                from PIL import Image  # type: ignore[import-untyped]
+                from rich_pixels import Pixels  # type: ignore[import-untyped]
+            except ImportError:
+                return
+
+            # Transcript lines look like `1. **label** — ...`. Pull the leading
+            # integer to locate the capture file.
+            import re as _re
+
+            m = _re.match(r"\s*(\d+)\.\s", line)
+            if not m:
+                return
+            step = int(m.group(1))
+
+            # Captures directory is sibling of tests/ — mirror the path the
+            # tailer watches. Search both likely layouts (in-mcp-server vs.
+            # firmware-root invocation).
+            candidates = [
+                self._root / "tests" / "ui_captures",
+                self._root / "mcp-server" / "tests" / "ui_captures",
+            ]
+            captures_root = next((p for p in candidates if p.is_dir()), None)
+            if captures_root is None:
+                return
+
+            # Drill into <session_seed>/<test_id>/ — test_id is the
+            # sanitized nodeid the tailer already passed through.
+            matches = list(captures_root.rglob(f"{test_id}/{step:03d}-*.png"))
+            if not matches:
+                return
+            png_path = matches[-1]
+
+            try:
+                img = Image.open(png_path).convert("RGB")
+                # Resize to fit ~32 cells wide × ~12 rows tall (half-block
+                # renderer gives 2× vertical resolution, so 32×24 px input
+                # lands at ~32×12 cells). Keep aspect ratio.
+                target_w = 60
+                w, h = img.size
+                target_h = max(1, int(h * (target_w / max(1, w))))
+                # Clamp: the image panel is 14 rows; half-blocks give 2 rows
+                # per vertical cell, so cap pixel height at ~26.
+                target_h = min(target_h, 26)
+                img = img.resize((target_w, target_h))
+                pixels = Pixels.from_image(img)
+            except Exception:
+                return
+
+            try:
+                image_widget = self.query_one("#uicap-image", tx.Static)
+                image_widget.update(pixels)
+            except Exception:
+                pass
+
         def on_firmware_log_line(self, message: Any) -> None:
             rec = message.record
             port = rec.get("port")

mcp-server/src/meshtastic_mcp/config.py

@@ -135,3 +135,14 @@ def picotool_bin() -> Path:
         ("picotool",),
         "Install via `brew install picotool` or build from https://github.com/raspberrypi/picotool.",
     )
+
+
+def uhubctl_bin() -> Path:
+    return _hw_tool(
+        "MESHTASTIC_UHUBCTL_BIN",
+        ("uhubctl",),
+        "Install via `brew install uhubctl` (macOS) or `apt install uhubctl` "
+        "(Debian/Ubuntu). On Linux without the udev rules, or on older macOS "
+        "with certain hubs, you may need to run via `sudo`: "
+        "https://github.com/mvp/uhubctl#linux-usb-permissions",
+    )

mcp-server/src/meshtastic_mcp/input_events.py

@@ -0,0 +1,67 @@
+"""Python mirror of firmware `enum input_broker_event` (src/input/InputBroker.h).
+
+Used by `admin.send_input_event` + `tests/ui/` so callers can say
+`InputEventCode.RIGHT` instead of hard-coding 20. Values MUST stay in sync
+with the firmware enum — unit test `tests/unit/test_input_event_codes.py`
+pins the mapping.
+"""
+
+from __future__ import annotations
+
+from enum import IntEnum
+
+
+class InputEventCode(IntEnum):
+    """Button / key / gesture events dispatched by the firmware InputBroker."""
+
+    NONE = 0
+    SELECT = 10
+    SELECT_LONG = 11
+    UP_LONG = 12
+    DOWN_LONG = 13
+    UP = 17
+    DOWN = 18
+    LEFT = 19
+    RIGHT = 20
+    CANCEL = 24
+    BACK = 27
+    # Auto-incremented values in the C enum (27 + 1, +2, +3):
+    USER_PRESS = 28
+    ALT_PRESS = 29
+    ALT_LONG = 30
+    SHUTDOWN = 0x9B
+    GPS_TOGGLE = 0x9E
+    SEND_PING = 0xAF
+    FN_F1 = 0xF1
+    FN_F2 = 0xF2
+    FN_F3 = 0xF3
+    FN_F4 = 0xF4
+    FN_F5 = 0xF5
+    MATRIXKEY = 0xFE
+    ANYKEY = 0xFF
+
+
+def coerce_event_code(value: int | str | InputEventCode) -> int:
+    """Accept an int, a case-insensitive name, or an `InputEventCode` and return
+    the u8 wire value. Raises ValueError on unknown names / out-of-range ints.
+    """
+    if isinstance(value, InputEventCode):
+        return int(value)
+    if isinstance(value, int):
+        if not 0 <= value <= 255:
+            raise ValueError(f"event_code out of u8 range: {value}")
+        return value
+    if isinstance(value, str):
+        key = value.upper().replace("-", "_")
+        if key.startswith("INPUT_BROKER_"):
+            key = key[len("INPUT_BROKER_") :]
+        try:
+            return int(InputEventCode[key])
+        except KeyError as exc:
+            known = ", ".join(m.name for m in InputEventCode)
+            raise ValueError(
+                f"unknown event code name {value!r}; known: {known}"
+            ) from exc
+    raise TypeError(
+        f"event_code must be int|str|InputEventCode, got {type(value).__name__}"
+    )

mcp-server/src/meshtastic_mcp/ocr.py

@@ -0,0 +1,147 @@
+"""OCR wrapper for UI tests + the `capture_screen` tool.
+
+Auto-selects a reader in priority order:
+  1. `easyocr` (deep-learning, high quality on OLED screens — but ~100 MB
+     model download on first use).
+  2. `pytesseract` (requires system `tesseract` binary on PATH).
+  3. `null` — returns `""` with a warning. Tests fall back to log + image
+     evidence when OCR is unavailable.
+
+Override via `MESHTASTIC_UI_OCR_BACKEND=easyocr|pytesseract|null|auto`
+(default `auto`).
+
+`ocr_text(png_bytes) -> str` is the only public entry point. The reader is
+constructed lazily on first call and cached, so the easyocr cold-start cost
+only hits once per process.
+"""
+
+from __future__ import annotations
+
+import functools
+import logging
+import os
+import shutil
+import sys
+from typing import Callable
+
+log = logging.getLogger(__name__)
+
+
+def _backend_choice() -> str:
+    return os.environ.get("MESHTASTIC_UI_OCR_BACKEND", "auto").lower()
+
+
+@functools.lru_cache(maxsize=1)
+def _reader() -> tuple[str, Callable[[bytes], str]]:
+    """Return `(backend_name, callable)` for whichever OCR is available."""
+    choice = _backend_choice()
+
+    def _easyocr() -> tuple[str, Callable[[bytes], str]]:
+        import easyocr  # type: ignore[import-untyped]  # noqa: PLC0415
+        import numpy as np  # type: ignore[import-untyped]  # noqa: PLC0415
+
+        reader = easyocr.Reader(["en"], gpu=False, verbose=False)
+
+        def _run(png: bytes) -> str:
+            try:
+                import cv2  # type: ignore[import-untyped]  # noqa: PLC0415
+
+                arr = np.frombuffer(png, dtype=np.uint8)
+                img = cv2.imdecode(arr, cv2.IMREAD_COLOR)
+            except ImportError:
+                # Fall back to PIL if cv2 isn't around.
+                from io import BytesIO  # noqa: PLC0415
+
+                from PIL import Image  # type: ignore[import-untyped]  # noqa: PLC0415
+
+                img = np.array(Image.open(BytesIO(png)).convert("RGB"))
+            try:
+                results = reader.readtext(img, detail=0, paragraph=True)
+            except Exception as exc:  # noqa: BLE001
+                log.warning("easyocr failed: %s", exc)
+                return ""
+            return "\n".join(str(r) for r in results)
+
+        return "easyocr", _run
+
+    def _pytesseract() -> tuple[str, Callable[[bytes], str]]:
+        from io import BytesIO  # noqa: PLC0415
+
+        import pytesseract  # type: ignore[import-untyped]  # noqa: PLC0415
+        from PIL import Image  # type: ignore[import-untyped]  # noqa: PLC0415
+
+        if shutil.which("tesseract") is None:
+            raise ImportError("`tesseract` binary not on PATH")
+
+        def _run(png: bytes) -> str:
+            try:
+                return str(pytesseract.image_to_string(Image.open(BytesIO(png))))
+            except Exception as exc:  # noqa: BLE001
+                log.warning("pytesseract failed: %s", exc)
+                return ""
+
+        return "pytesseract", _run
+
+    def _null() -> tuple[str, Callable[[bytes], str]]:
+        log.warning(
+            "OCR backend is null; install easyocr or tesseract for text extraction"
+        )
+        return "null", lambda _png: ""
+
+    if choice == "easyocr":
+        return _easyocr()
+    if choice == "pytesseract":
+        return _pytesseract()
+    if choice == "null":
+        return _null()
+    if choice != "auto":
+        print(
+            f"[ocr] unknown MESHTASTIC_UI_OCR_BACKEND={choice!r}; falling back to auto",
+            file=sys.stderr,
+        )
+
+    # auto mode
+    try:
+        return _easyocr()
+    except ImportError:
+        pass
+    try:
+        return _pytesseract()
+    except ImportError:
+        pass
+    return _null()
+
+
+def ocr_text(png_bytes: bytes) -> str:
+    """Run OCR on a PNG-encoded image and return the decoded text (possibly empty)."""
+    if not png_bytes:
+        return ""
+    _, run = _reader()
+    return run(png_bytes)
+
+
+def backend_name() -> str:
+    """Return the currently-selected backend name, initializing if necessary."""
+    name, _ = _reader()
+    return name
+
+
+def warm() -> None:
+    """Run one dummy inference so the easyocr cold-start cost is paid upfront.
+
+    Pytest session fixture calls this once so the first real capture doesn't
+    eat the model-load latency.
+    """
+    # A 64×32 white PNG — decodes clean, no text to extract.
+    white_png = bytes.fromhex(
+        "89504e470d0a1a0a0000000d49484452000000400000002008060000007ccac28e"
+        "0000001c49444154785eedc1010d000000c2a0f74f6d0d370000000000000080"
+        "0b010000ffff030000000000000049454e44ae426082"
+    )
+    try:
+        ocr_text(white_png)
+    except Exception as exc:  # noqa: BLE001
+        log.warning("ocr.warm() failed: %s", exc)
+
+
+__all__ = ["backend_name", "ocr_text", "warm"]

mcp-server/src/meshtastic_mcp/server.py

@@ -1,4 +1,4 @@
-"""FastMCP server wiring — 38 tools across 7 categories.
+"""FastMCP server wiring — 43 tools across 9 categories (adds uhubctl power control).
 
 Each tool handler is a thin delegation to a named module (pio.py, admin.py,
 etc.). Business logic does not live here.
@@ -513,6 +513,152 @@ def factory_reset(
     return admin.factory_reset(port=port, confirm=confirm, full=full)
 
 
+@app.tool()
+def send_input_event(
+    event_code: int | str,
+    kb_char: int = 0,
+    touch_x: int = 0,
+    touch_y: int = 0,
+    port: str | None = None,
+) -> dict[str, Any]:
+    """Inject an InputBroker event (button / key / gesture) into the device UI.
+
+    Drives the same code path as a physical button press. Accepts a numeric
+    event code (0..255) or a name like `"RIGHT"`, `"SELECT"`, `"FN_F1"`.
+
+    Common codes: SELECT=10, UP=17, DOWN=18, LEFT=19, RIGHT=20, CANCEL=24,
+    BACK=27, FN_F1..F5=241..245.
+    """
+    return admin.send_input_event(
+        event_code=event_code,
+        kb_char=kb_char,
+        touch_x=touch_x,
+        touch_y=touch_y,
+        port=port,
+    )
+
+
+@app.tool()
+def capture_screen(role: str | None = None, ocr: bool = True) -> dict[str, Any]:
+    """Grab a frame from the USB webcam pointed at the device screen.
+
+    Returns PNG bytes (base64), optional OCR text, and backend metadata.
+    Requires the `[ui]` extras (opencv-python-headless) and a camera
+    configured via `MESHTASTIC_UI_CAMERA_DEVICE[_<ROLE>]`. Falls back to a
+    1×1 black PNG from the null backend when no camera is configured.
+    """
+    import base64
+
+    from . import camera as camera_mod
+
+    cam = camera_mod.get_camera(role)
+    try:
+        png = cam.capture()
+    finally:
+        cam.close()
+
+    result: dict[str, Any] = {
+        "backend": cam.name,
+        "bytes": len(png),
+        "image_base64": base64.b64encode(png).decode("ascii"),
+    }
+    if ocr:
+        from . import ocr as ocr_mod
+
+        result["ocr_backend"] = ocr_mod.backend_name()
+        result["ocr_text"] = ocr_mod.ocr_text(png)
+    return result
+
+
+# ---------- USB power control (uhubctl) -----------------------------------
+
+
+@app.tool()
+def uhubctl_list() -> list[dict[str, Any]]:
+    """List every USB hub + per-port device attachment as seen by `uhubctl`.
+
+    Read-only — no confirm required. Each hub entry includes its location
+    (`1-1.3`), descriptor, whether it supports Per-Port Power Switching,
+    and a list of populated ports with VID:PID of attached devices.
+    Useful for pre-flight checks before a destructive power-cycle call.
+    """
+    from . import uhubctl as uhubctl_mod
+
+    return uhubctl_mod.list_hubs()
+
+
+@app.tool()
+def uhubctl_power(
+    action: str,
+    location: str | None = None,
+    port: int | None = None,
+    role: str | None = None,
+    confirm: bool = False,
+) -> dict[str, Any]:
+    """Power a USB hub port on or off via `uhubctl -a on|off`.
+
+    Target the port by either (`location`, `port`) — raw uhubctl syntax,
+    e.g. `location="1-1.3", port=2` — OR by `role` ("nrf52", "esp32s3").
+    Role lookup honors `MESHTASTIC_UHUBCTL_LOCATION_<ROLE>` +
+    `_PORT_<ROLE>` env vars first, falls back to VID auto-detection.
+
+    `action="off"` requires `confirm=True` (destructive — the attached
+    device will immediately disappear from the OS).
+    """
+    from . import uhubctl as uhubctl_mod
+
+    action_lower = action.lower()
+    if action_lower not in {"on", "off"}:
+        raise ValueError(f"action must be 'on' or 'off', got {action!r}")
+    if action_lower == "off" and not confirm:
+        raise uhubctl_mod.UhubctlError(
+            "uhubctl_power action='off' requires confirm=True"
+        )
+    loc, p = _resolve_uhubctl_target(location, port, role)
+    if action_lower == "on":
+        return uhubctl_mod.power_on(loc, p)
+    return uhubctl_mod.power_off(loc, p)
+
+
+@app.tool()
+def uhubctl_cycle(
+    location: str | None = None,
+    port: int | None = None,
+    role: str | None = None,
+    delay_s: int = 2,
+    confirm: bool = False,
+) -> dict[str, Any]:
+    """Power a USB hub port off, wait `delay_s` seconds, then on.
+
+    The typical hard-reset sequence — shorter than off+on as two RPCs
+    because uhubctl handles the timing in-process. Target by (location,
+    port) or by role (see `uhubctl_power`). Requires `confirm=True`.
+    """
+    from . import uhubctl as uhubctl_mod
+
+    if not confirm:
+        raise uhubctl_mod.UhubctlError("uhubctl_cycle requires confirm=True")
+    if delay_s < 0 or delay_s > 60:
+        raise ValueError(f"delay_s must be 0..60, got {delay_s}")
+    loc, p = _resolve_uhubctl_target(location, port, role)
+    return uhubctl_mod.cycle(loc, p, delay_s=delay_s)
+
+
+def _resolve_uhubctl_target(
+    location: str | None, port: int | None, role: str | None
+) -> tuple[str, int]:
+    """Shared arg-resolution for uhubctl_power + uhubctl_cycle."""
+    from . import uhubctl as uhubctl_mod
+
+    if role is not None:
+        if location is not None or port is not None:
+            raise ValueError("pass either `role` OR (`location` + `port`), not both")
+        return uhubctl_mod.resolve_target(role)
+    if location is None or port is None:
+        raise ValueError("must pass `role` or both `location` and `port`")
+    return (location, int(port))
+
+
 # ---------- Direct hardware tools -----------------------------------------
 
 

mcp-server/src/meshtastic_mcp/uhubctl.py

@@ -0,0 +1,321 @@
+"""USB hub power control via `uhubctl` — hard-recovery for wedged devices +
+deliberate offline-peer simulation for mesh tests.
+
+Why: when a Meshtastic device's serial port wedges (stuck in a boot loop,
+frozen USB CDC, crashed firmware that didn't reboot), the only recovery is
+a physical unplug. uhubctl toggles VBUS per-port on any hub with Per-Port
+Power Switching (PPPS) support — which is most externally-powered hubs
+from the last ~5 years — so the harness can power-cycle a device
+programmatically.
+
+Architecture:
+- `list_hubs()` parses `uhubctl` default output into structured records.
+- `find_port_for_vid(vid)` walks the hubs to find which location+port
+  hosts a given USB VID.
+- `resolve_target(role)` is the public entry for callers that know a role
+  (`nrf52`, `esp32s3`) but not a hub location: env-var pins win, VID
+  auto-detect falls back.
+- `power_on`, `power_off`, `cycle` wrap the corresponding `uhubctl -a`
+  invocations, routed through `hw_tools._run` so they share tee-to-flash-
+  log + timeout handling with esptool / nrfutil / picotool.
+
+Sudo policy: **fail fast**. Modern macOS + most PPPS-capable hubs work
+without root, but Linux without udev rules (or old macOS with specific
+driver quirks) still needs it. We run uhubctl non-root; if stderr
+matches the classic permission pattern we raise `UhubctlError` with an
+install hint pointing at the uhubctl docs. Auto-wrapping with `sudo`
+would prompt in the middle of test runs — bad for CI.
+"""
+
+from __future__ import annotations
+
+import os
+import re
+from typing import Any, Sequence
+
+from . import config, hw_tools
+
+# ---------- Parser ---------------------------------------------------------
+
+# Hub descriptor line:
+#   Current status for hub 1-1.3 [2109:2817 VIA Labs, Inc. USB2.0 Hub, USB 2.10, 4 ports, ppps]
+_HUB_RE = re.compile(
+    r"^Current status for hub (?P<location>\S+)\s+\[(?P<descriptor>.+)\]\s*$"
+)
+
+# Port line:
+#   "  Port 2: 0103 power enable connect [239a:8029 RAKwireless ...]"
+# The bracketed section is absent for empty ports.
+_PORT_RE = re.compile(
+    r"^\s+Port\s+(?P<port>\d+):\s+(?P<status>\S+)\s+(?P<flags>.*?)"
+    r"(?:\s+\[(?P<device_vid>[0-9a-fA-F]{4}):(?P<device_pid>[0-9a-fA-F]{4})(?:\s+(?P<device_desc>.+))?\])?\s*$"
+)
+
+
+class UhubctlError(RuntimeError):
+    """Raised on uhubctl-specific failures: parse errors, permission denied,
+    hub-not-found, or PPPS not supported."""
+
+
+# ---------- Role → VID map -------------------------------------------------
+
+# Mirrors the default hub_profile in `mcp-server/tests/conftest.py:335`.
+# Note: esp32s3 and esp32s3_alt share a logical role — we search both.
+ROLE_VIDS: dict[str, tuple[int, ...]] = {
+    "nrf52": (0x239A,),
+    "esp32s3": (0x303A, 0x10C4),
+}
+
+
+def _normalize_role(role: str) -> str:
+    """Collapse `esp32s3_alt` → `esp32s3` to match the tier conventions."""
+    return role.split("_alt", 1)[0].lower()
+
+
+# ---------- Core subprocess runner -----------------------------------------
+
+
+# If uhubctl hits a permission problem — most commonly Linux without the
+# udev rules, or a macOS variant where the kernel holds the hub driver —
+# it prints something like "Permission denied. Try running as root".
+# Linux error text varies; we match a broad substring rather than exact.
+_PERM_ERROR_PATTERNS = (
+    "permission denied",
+    "operation not permitted",
+    "try running as root",
+    "need root",
+    "requires root",
+)
+
+
+def _run_uhubctl(args: Sequence[str], *, timeout: float = 30.0) -> dict[str, Any]:
+    """Invoke uhubctl with the given args. Returns `hw_tools._run`'s dict.
+
+    Translates permission-denied failures into a `UhubctlError` with the
+    install hint, so callers don't have to match stderr themselves. Other
+    non-zero exits are returned as-is for the caller to interpret.
+    """
+    binary = config.uhubctl_bin()
+    result = hw_tools._run(binary, args, timeout=timeout)  # noqa: SLF001
+    if result["exit_code"] != 0:
+        combined = (result.get("stderr") or "") + "\n" + (result.get("stdout") or "")
+        lower = combined.lower()
+        if any(pat in lower for pat in _PERM_ERROR_PATTERNS):
+            raise UhubctlError(
+                "uhubctl exited with a permission error. Install the udev "
+                "rules on Linux, or try `sudo` as a fallback: "
+                "https://github.com/mvp/uhubctl#linux-usb-permissions\n"
+                f"stderr: {result.get('stderr_tail')!r}"
+            )
+    return result
+
+
+# ---------- List / parse ---------------------------------------------------
+
+
+def parse_list_output(output: str) -> list[dict[str, Any]]:
+    """Parse the default `uhubctl` stdout into structured hubs.
+
+    Each hub: {
+        "location":   "1-1.3",
+        "descriptor": "2109:2817 VIA Labs ...",
+        "vid":        0x2109,
+        "pid":        0x2817,
+        "ppps":       bool,
+        "ports":      [{"port": int, "status": str, "flags": str,
+                         "device_vid": int | None, "device_pid": int | None,
+                         "device_desc": str | None}, ...],
+    }
+    """
+    hubs: list[dict[str, Any]] = []
+    current: dict[str, Any] | None = None
+
+    for line in output.splitlines():
+        hm = _HUB_RE.match(line)
+        if hm:
+            descriptor = hm.group("descriptor")
+            hub_vid, hub_pid = None, None
+            vid_match = re.match(r"([0-9a-fA-F]{4}):([0-9a-fA-F]{4})", descriptor)
+            if vid_match:
+                hub_vid = int(vid_match.group(1), 16)
+                hub_pid = int(vid_match.group(2), 16)
+            current = {
+                "location": hm.group("location"),
+                "descriptor": descriptor,
+                "vid": hub_vid,
+                "pid": hub_pid,
+                "ppps": ", ppps" in descriptor or descriptor.endswith("ppps"),
+                "ports": [],
+            }
+            hubs.append(current)
+            continue
+
+        pm = _PORT_RE.match(line)
+        if pm and current is not None:
+            device_vid = pm.group("device_vid")
+            device_pid = pm.group("device_pid")
+            current["ports"].append(
+                {
+                    "port": int(pm.group("port")),
+                    "status": pm.group("status"),
+                    "flags": (pm.group("flags") or "").strip(),
+                    "device_vid": int(device_vid, 16) if device_vid else None,
+                    "device_pid": int(device_pid, 16) if device_pid else None,
+                    "device_desc": (pm.group("device_desc") or "").strip() or None,
+                }
+            )
+    return hubs
+
+
+def list_hubs() -> list[dict[str, Any]]:
+    """Enumerate every hub uhubctl can see, with per-port device attachments.
+
+    Pure read — no power state changes. Useful as a pre-flight check before
+    a destructive `power_off` call.
+    """
+    result = _run_uhubctl([], timeout=15.0)
+    if result["exit_code"] != 0:
+        raise UhubctlError(
+            f"uhubctl list failed (exit {result['exit_code']}): {result.get('stderr_tail')!r}"
+        )
+    return parse_list_output(result["stdout"])
+
+
+# ---------- Lookup / resolution -------------------------------------------
+
+
+def find_port_for_vid(
+    vid: int, pid: int | None = None, *, only_ppps: bool = True
+) -> list[tuple[str, int]]:
+    """Return ALL (location, port) matches for a device VID (optionally +PID).
+
+    `only_ppps=True` filters out hubs that don't advertise PPPS — we can't
+    control them anyway. Callers that want to diagnose a missing device can
+    pass `only_ppps=False` to see if the device is on a non-controllable
+    hub (and raise a clearer error).
+    """
+    hubs = list_hubs()
+    matches: list[tuple[str, int]] = []
+    for hub in hubs:
+        if only_ppps and not hub["ppps"]:
+            continue
+        for port in hub["ports"]:
+            if port["device_vid"] != vid:
+                continue
+            if pid is not None and port["device_pid"] != pid:
+                continue
+            matches.append((hub["location"], port["port"]))
+    return matches
+
+
+def resolve_target(role: str) -> tuple[str, int]:
+    """Resolve a Meshtastic role to (hub_location, port_number).
+
+    Priority:
+      1. Env vars `MESHTASTIC_UHUBCTL_LOCATION_<ROLE>` + `_PORT_<ROLE>`
+         (e.g. `MESHTASTIC_UHUBCTL_LOCATION_NRF52=1-1.3`, `_PORT_NRF52=2`).
+      2. VID auto-detect against `ROLE_VIDS[role]`, taking the first PPPS
+         match.
+
+    Raises `UhubctlError` on ambiguity (multiple matches) or no-match. The
+    env-var path exists specifically to disambiguate when two devices share
+    a VID.
+    """
+    role = _normalize_role(role)
+    env_key_loc = f"MESHTASTIC_UHUBCTL_LOCATION_{role.upper()}"
+    env_key_port = f"MESHTASTIC_UHUBCTL_PORT_{role.upper()}"
+    loc = os.environ.get(env_key_loc)
+    port_str = os.environ.get(env_key_port)
+    if loc and port_str:
+        try:
+            return (loc, int(port_str))
+        except ValueError as exc:
+            raise UhubctlError(
+                f"{env_key_port}={port_str!r} is not a valid integer"
+            ) from exc
+
+    if role not in ROLE_VIDS:
+        raise UhubctlError(
+            f"unknown role {role!r}; known roles: {sorted(ROLE_VIDS)}. "
+            f"Set {env_key_loc} + {env_key_port} to pin manually."
+        )
+
+    matches: list[tuple[str, int]] = []
+    for vid in ROLE_VIDS[role]:
+        matches.extend(find_port_for_vid(vid))
+
+    if not matches:
+        vids = ", ".join(f"0x{v:04x}" for v in ROLE_VIDS[role])
+        raise UhubctlError(
+            f"no controllable hub hosts a device with VID in {{{vids}}} "
+            f"for role={role!r}. Check the device is plugged into a "
+            f"PPPS-capable hub, or pin manually via {env_key_loc} + {env_key_port}."
+        )
+    if len(matches) > 1:
+        shown = ", ".join(f"{loc}:port{p}" for loc, p in matches)
+        raise UhubctlError(
+            f"ambiguous: multiple devices match role={role!r} ({shown}). "
+            f"Pin the target via {env_key_loc} + {env_key_port}."
+        )
+    return matches[0]
+
+
+# ---------- Power actions --------------------------------------------------
+
+
+def _action(
+    action: str,
+    location: str,
+    port: int,
+    *,
+    delay_s: int | None = None,
+    timeout: float = 30.0,
+) -> dict[str, Any]:
+    args: list[str] = ["-a", action, "-l", location, "-p", str(port)]
+    if delay_s is not None:
+        args.extend(["-d", str(delay_s)])
+    # Suppress verbose "before" printout so our parser doesn't have to skip it.
+    args.append("-N")
+    result = _run_uhubctl(args, timeout=timeout)
+    if result["exit_code"] != 0:
+        raise UhubctlError(
+            f"uhubctl -a {action} -l {location} -p {port} failed "
+            f"(exit {result['exit_code']}): {result.get('stderr_tail')!r}"
+        )
+    return {
+        "action": action,
+        "location": location,
+        "port": port,
+        "delay_s": delay_s,
+        "duration_s": result["duration_s"],
+    }
+
+
+def power_on(location: str, port: int) -> dict[str, Any]:
+    """Drive the port VBUS high. Device re-enumerates in 1-3 s on healthy hubs."""
+    return _action("on", location, port)
+
+
+def power_off(location: str, port: int) -> dict[str, Any]:
+    """Drive the port VBUS low. Device disappears from `list_devices` immediately."""
+    return _action("off", location, port)
+
+
+def cycle(location: str, port: int, delay_s: int = 2) -> dict[str, Any]:
+    """Off → wait `delay_s` → on. The common hard-reset pattern."""
+    # uhubctl's own `-a cycle` handles the delay internally; we use a
+    # slightly longer timeout to accommodate delay_s + enumeration.
+    return _action("cycle", location, port, delay_s=delay_s, timeout=30.0 + delay_s * 2)
+
+
+__all__ = [
+    "ROLE_VIDS",
+    "UhubctlError",
+    "cycle",
+    "find_port_for_vid",
+    "list_hubs",
+    "parse_list_output",
+    "power_off",
+    "power_on",
+    "resolve_target",
+]

mcp-server/src/meshtastic_mcp/userprefs.py

@@ -393,6 +393,7 @@ def build_testing_profile(
     long_name: str | None = None,
     disable_mqtt: bool = True,
     disable_position: bool = False,
+    enable_ui_log: bool = False,
 ) -> dict[str, Any]:
     """Build a USERPREFS dict for an isolated test-mesh device.
 
@@ -423,6 +424,10 @@ def build_testing_profile(
             traffic never leaks to a public broker.
         disable_position: if True, disables GPS + position broadcasts — useful
             when test devices sit on a bench without antennas.
+        enable_ui_log: if True, stamps `USERPREFS_UI_TEST_LOG=true` so the
+            firmware emits one `Screen: frame N/M name=... reason=...` log
+            line per frame transition. Test-only; off by default because the
+            log is chatty (multiple times per second during UI interaction).
 
     """
     if region not in KNOWN_REGIONS:
@@ -475,6 +480,9 @@ def build_testing_profile(
         prefs["USERPREFS_CONFIG_OWNER_LONG_NAME"] = long_name
     if short_name is not None:
         prefs["USERPREFS_CONFIG_OWNER_SHORT_NAME"] = short_name
+    if enable_ui_log:
+        # Consumed by `#ifdef USERPREFS_UI_TEST_LOG` in src/graphics/Screen.cpp.
+        prefs["USERPREFS_UI_TEST_LOG"] = True
 
     return prefs
 

mcp-server/tests/_power.py

@@ -0,0 +1,112 @@
+"""USB hub power control for tests — thin composition of the `uhubctl`
+module + `_port_discovery.resolve_port_by_role`.
+
+Why separate from the production module:
+- `meshtastic_mcp.uhubctl.cycle` returns as soon as uhubctl exits (VBUS is
+  back on, but the device hasn't finished enumerating as a CDC port yet).
+- Tests that want to immediately issue a `connect(port=...)` need the NEW
+  `/dev/cu.*` path, which can differ from the pre-cycle path on nRF52
+  boards (CDC re-enumeration assigns a fresh `cu.usbmodemNNNN`).
+- `resolve_port_by_role` already handles that wait + path-resolution for
+  the `factory_reset` flow. Composing the two gives a one-call helper.
+
+Also exposes `is_uhubctl_available()` so fixtures can skip cleanly when
+uhubctl isn't installed — we never want "no uhubctl" to look like a test
+failure.
+"""
+
+from __future__ import annotations
+
+import time
+from typing import Any
+
+from meshtastic_mcp import config as config_mod
+from meshtastic_mcp import uhubctl as uhubctl_mod
+
+from ._port_discovery import resolve_port_by_role
+
+
+def is_uhubctl_available() -> bool:
+    """Return True iff `config.uhubctl_bin()` resolves AND the binary is callable.
+
+    Soft-fails silently — fixtures use this to `pytest.skip` with an
+    actionable message when the operator hasn't installed uhubctl.
+    """
+    try:
+        config_mod.uhubctl_bin()
+    except Exception:  # noqa: BLE001
+        return False
+    # Do NOT actually invoke uhubctl here — on macOS a non-sudo run would
+    # fail, which is a config issue, not a tool-missing issue. That gets
+    # surfaced to the user when they actually run a recovery action.
+    return True
+
+
+def power_on(role: str) -> dict[str, Any]:
+    """Power on the hub port hosting `role`. Does NOT wait for re-enumeration.
+    Use `power_cycle` or follow with `resolve_port_by_role` to block on readiness.
+    """
+    loc, port = uhubctl_mod.resolve_target(role)
+    return uhubctl_mod.power_on(loc, port)
+
+
+def power_off(role: str) -> dict[str, Any]:
+    """Power off the hub port hosting `role`. The device disappears from
+    `list_devices` immediately.
+    """
+    loc, port = uhubctl_mod.resolve_target(role)
+    return uhubctl_mod.power_off(loc, port)
+
+
+def power_cycle(
+    role: str,
+    *,
+    delay_s: int = 2,
+    rediscover_timeout_s: float = 30.0,
+) -> str:
+    """Cycle the port hosting `role`, wait for re-enumeration, return the
+    new port path.
+
+    On nRF52 the post-cycle path typically matches the pre-cycle path, but
+    macOS may assign a different `/dev/cu.usbmodemNNNN` if the previous
+    CDC endpoint hasn't been fully released. `resolve_port_by_role`
+    handles that transparently.
+    """
+    loc, port = uhubctl_mod.resolve_target(role)
+    uhubctl_mod.cycle(loc, port, delay_s=delay_s)
+    # After uhubctl exits, VBUS is on but the device may still be in
+    # bootloader init. Give it ~500 ms head-start before polling so we
+    # don't spam list_devices pointlessly.
+    time.sleep(0.5)
+    return resolve_port_by_role(role, timeout_s=rediscover_timeout_s)
+
+
+def wait_for_absence(role: str, *, timeout_s: float = 10.0) -> None:
+    """Block until a device matching `role` is NOT in `list_devices`.
+
+    Used by the recovery tier to assert power_off actually took effect.
+    Raises TimeoutError on failure.
+    """
+    from meshtastic_mcp import devices as devices_mod
+
+    from ._port_discovery import _ROLE_VIDS, _coerce_vid  # type: ignore[attr-defined]
+
+    if role not in _ROLE_VIDS:
+        raise ValueError(f"unknown role {role!r}")
+    wanted = _ROLE_VIDS[role]
+    deadline = time.monotonic() + timeout_s
+    while time.monotonic() < deadline:
+        found = devices_mod.list_devices(include_unknown=True)
+        if not any(_coerce_vid(d.get("vid")) in wanted for d in found):
+            return
+        time.sleep(0.3)
+    raise TimeoutError(f"role {role!r} still visible after {timeout_s}s of power_off")
+
+
+__all__ = [
+    "is_uhubctl_available",
+    "power_cycle",
+    "power_off",
+    "power_on",
+    "wait_for_absence",
+]

mcp-server/tests/conftest.py

@@ -123,15 +123,24 @@ def pytest_collection_modifyitems(
             return (2, item.nodeid)
         if "/monitor/" in path or "tests/monitor" in path:
             return (3, item.nodeid)
-        if "/fleet/" in path or "tests/fleet" in path:
+        # Recovery tier: explicitly cycles device power via uhubctl. Slots
+        # between monitor (read-only) and ui (state-preserving) so any tier
+        # after it starts from a known re-enumerated + re-verified state.
+        if "/recovery/" in path or "tests/recovery" in path:
             return (4, item.nodeid)
+        # UI tier slots here — read-only w.r.t. mesh state, only mutates
+        # the on-screen UI (BACK×5 guard restores home before each test).
+        if "/ui/" in path or "tests/ui" in path:
+            return (5, item.nodeid)
+        if "/fleet/" in path or "tests/fleet" in path:
+            return (6, item.nodeid)
         # State-mutating tiers run last.
         if "/admin/" in path or "tests/admin" in path:
-            return (5, item.nodeid)
+            return (7, item.nodeid)
         if "/provisioning/" in path or "tests/provisioning" in path:
-            return (6, item.nodeid)
+            return (8, item.nodeid)
         # Top-level + anything else falls between.
-        return (7, item.nodeid)
+        return (9, item.nodeid)
 
     items.sort(key=sort_key)
 
@@ -156,13 +165,20 @@ def session_seed(request: pytest.FixtureRequest) -> str:
 
 @pytest.fixture(scope="session")
 def test_profile(session_seed: str) -> dict[str, Any]:
-    """The canonical isolated-mesh test profile for this session."""
+    """The canonical isolated-mesh test profile for this session.
+
+    `enable_ui_log=True` stamps `USERPREFS_UI_TEST_LOG` so the firmware
+    emits `Screen: frame N/M name=... reason=...` log lines per UI
+    transition — consumed by the `tests/ui/` tier. Harmless on boards
+    without a screen (the `#ifdef` sits behind `HAS_SCREEN`).
+    """
     return userprefs.build_testing_profile(
         psk_seed=session_seed,
         channel_name="McpTest",
         channel_num=88,
         region="US",
         modem_preset="LONG_FAST",
+        enable_ui_log=True,
     )
 
 
@@ -654,6 +670,7 @@ def pytest_generate_tests(metafunc: pytest.Metafunc) -> None:
 def baked_single(
     baked_mesh: dict[str, Any],
     baked_single_role: str,
+    hub_devices: dict[str, str],
 ) -> dict[str, Any]:
     """Function-scoped: a single verified baked device.
 
@@ -662,10 +679,75 @@ def baked_single(
     (e.g. `test_owner_survives_reboot[nrf52]` +
     `test_owner_survives_reboot[esp32s3]`). Tests never hardcode a role
     and never skip a device that happens to be connected.
+
+    Auto-recovery: if the baked device fails a pre-test `device_info` probe
+    AND uhubctl is available, power-cycle the port once and retry. Without
+    uhubctl, surface the wedge as a clear skip. This catches "device got
+    stuck between tests" without masking persistent regressions (a second
+    wedge after cycling still skips).
     """
     if baked_single_role not in baked_mesh:
         pytest.skip(f"role {baked_single_role!r} not present on the hub")
-    return {"role": baked_single_role, **baked_mesh[baked_single_role]}
+
+    entry = baked_mesh[baked_single_role]
+    port = entry.get("port")
+    if port:
+        try:
+            _run_with_timeout(lambda: info.device_info(port=port, timeout_s=3.0), 5.0)
+        except Exception:
+            # Device didn't respond. Try a power-cycle recovery if uhubctl
+            # is installed; otherwise surface a skip that names the root
+            # cause clearly.
+            from tests import _power
+
+            if not _power.is_uhubctl_available():
+                pytest.skip(
+                    f"device {baked_single_role!r} unresponsive on {port}; "
+                    "install uhubctl (`brew install uhubctl` / `apt install "
+                    "uhubctl`) for auto power-cycle recovery"
+                )
+            try:
+                new_port = _power.power_cycle(baked_single_role, delay_s=2)
+            except Exception as exc:  # noqa: BLE001
+                pytest.skip(
+                    f"device {baked_single_role!r} wedged and power-cycle "
+                    f"failed: {exc}"
+                )
+            # Mutate both the session-scoped `hub_devices` map AND the
+            # baked_mesh entry so downstream fixtures see the recovered port.
+            hub_devices[baked_single_role] = new_port
+            baked_mesh[baked_single_role]["port"] = new_port
+            entry = baked_mesh[baked_single_role]
+    return {"role": baked_single_role, **entry}
+
+
+@pytest.fixture
+def power_cycle(
+    hub_devices: dict[str, str],
+) -> Callable[..., str]:
+    """Return a callable `(role, delay_s=2) -> new_port` that hard-resets the
+    hub port hosting `role`. Skips the test cleanly when uhubctl isn't
+    installed — never want "no uhubctl" to look like a test failure.
+
+    The callable mutates `hub_devices[role]` in place so subsequent fixture
+    lookups pick up the post-cycle port (mirrors the pattern in
+    provisioning/test_userprefs_survive_factory_reset.py).
+    """
+    from tests import _power
+
+    if not _power.is_uhubctl_available():
+        pytest.skip(
+            "uhubctl not installed; this test needs it for power control. "
+            "Install via `brew install uhubctl` (macOS) or `apt install "
+            "uhubctl` (Debian/Ubuntu)."
+        )
+
+    def _cycle(role: str, delay_s: int = 2) -> str:
+        new_port = _power.power_cycle(role, delay_s=delay_s)
+        hub_devices[role] = new_port
+        return new_port
+
+    return _cycle
 
 
 _DEFAULT_ROLE_ENVS = {
@@ -960,6 +1042,45 @@ def _run_with_timeout(fn: Callable[[], Any], timeout: float) -> Any:
             raise TimeoutError(f"operation did not complete within {timeout}s") from exc
 
 
+def _attach_ui_captures(item: pytest.Item, report: Any) -> None:
+    """Embed per-step UI captures (PNG + OCR) into the pytest-html extras.
+
+    Runs for every UI-tier test on BOTH pass and fail so the HTML report
+    always shows the image strip + OCR transcript. Silently no-ops if
+    pytest-html isn't installed or the test didn't use `frame_capture`.
+    """
+    captures = getattr(item, "_ui_captures", None)
+    if not captures:
+        return
+    try:
+        from pytest_html import extras as html_extras  # type: ignore[import-untyped]
+    except ImportError:
+        return
+
+    existing = getattr(report, "extras", None) or []
+    extras_list = list(existing)
+    for cap in captures:
+        png_path = cap.get("png_path")
+        label = f"{cap.get('step', '?')}: {cap.get('label', '')}"
+        frame = cap.get("frame") or {}
+        frame_str = (
+            f" — frame {frame.get('idx')} {frame.get('name')!r}" if frame else ""
+        )
+        if png_path:
+            try:
+                with open(png_path, "rb") as fh:
+                    import base64
+
+                    b64 = base64.b64encode(fh.read()).decode("ascii")
+                extras_list.append(html_extras.png(b64, name=f"{label}{frame_str}"))
+            except OSError:
+                pass
+        ocr = (cap.get("ocr_text") or "").strip()
+        if ocr:
+            extras_list.append(html_extras.text(ocr, name=f"OCR: {label}{frame_str}"))
+    report.extras = extras_list  # type: ignore[attr-defined]
+
+
 @pytest.hookimpl(hookwrapper=True)
 def pytest_runtest_makereport(item: pytest.Item, call: pytest.CallInfo[Any]) -> Any:
     """On test failure, attach serial capture + device state as report artifacts.
@@ -967,10 +1088,20 @@ def pytest_runtest_makereport(item: pytest.Item, call: pytest.CallInfo[Any]) ->
     Hard-bounded by `_run_with_timeout` — if the device is unreachable (stuck
     port, unbaked firmware, dead board), the dump is skipped rather than
     hanging the session.
+
+    For UI-tier tests, also embeds per-step camera captures + OCR on every
+    test (pass or fail) so the HTML report shows visual evidence of what
+    the device did.
     """
     outcome = yield
     report = outcome.get_result()
 
+    # Attach UI captures on any outcome (pass + fail) — these are the whole
+    # point of the UI tier. Do this before the failure-only branch below so
+    # passing tests still get their image strip.
+    if report.when == "call":
+        _attach_ui_captures(item, report)
+
     if report.when != "call" or report.outcome != "failed":
         return
 

mcp-server/tests/mesh/test_peer_offline_recovery.py

@@ -0,0 +1,155 @@
+"""Isolation test for peer-offline-then-back mid-conversation.
+
+Verifies the mesh stack's behavior when a peer is physically powered
+off mid-send via uhubctl, then powered back on.
+
+Flow (parametrized over every directed mesh_pair):
+  1. Bilateral PKI warmup (same pattern as test_direct_with_ack).
+  2. TX sends a broadcast text "msg-1" — RX confirms receipt via pubsub.
+  3. Power OFF RX via uhubctl. The RX device disappears from the OS.
+  4. TX sends a directed text "msg-2" with wantAck=True. Firmware retries
+     internally for ~30s before giving up. Assertion: the packet object
+     was accepted by the TX stack (non-None) — we don't assert an ACK
+     since there's no peer to send one.
+  5. Power ON RX. Wait for re-enumeration + boot.
+  6. Bilateral PKI re-nudge — RX's in-RAM PKI cache was wiped on reboot,
+     so the first directed send may err=35 without a fresh NodeInfo ping.
+  7. TX sends a directed "msg-3" — RX receives it via pubsub, confirming
+     the mesh recovered.
+
+Skips cleanly if uhubctl isn't installed (via the `power_cycle` fixture's
+auto-skip). Skips for pair directions where RX isn't power-controllable
+(e.g. a USB-IF hub that doesn't support PPPS for its port).
+"""
+
+from __future__ import annotations
+
+import time
+from typing import Any
+
+import pytest
+from meshtastic_mcp.connection import connect
+from tests import _power
+from tests._port_discovery import resolve_port_by_role
+
+from ._receive import ReceiveCollector, nudge_nodeinfo
+
+
+@pytest.mark.timeout(360)
+def test_peer_offline_then_recovers(
+    mesh_pair: dict[str, Any],
+    power_cycle,  # noqa: ARG001 — forces uhubctl-availability skip
+    hub_devices: dict[str, str],
+) -> None:
+    tx_port = mesh_pair["tx"]["port"]
+    rx_node_num = mesh_pair["rx"]["my_node_num"]
+    tx_role = mesh_pair["tx_role"]
+    rx_role = mesh_pair["rx_role"]
+
+    unique_pre = f"peer-offline-pre-{tx_role}-to-{rx_role}-{int(time.time())}"
+    unique_post = f"peer-offline-post-{tx_role}-to-{rx_role}-{int(time.time())}"
+
+    # Step 1 + 2: warm up + confirm baseline delivery works before the test.
+    with ReceiveCollector(
+        mesh_pair["rx"]["port"], topic="meshtastic.receive.text"
+    ) as rx:
+        rx.broadcast_nodeinfo_ping()
+        with connect(port=tx_port) as tx_iface:
+            nudge_nodeinfo(tx_iface)
+            # Wait for bilateral PKI (RX pubkey in TX's nodesByNum).
+            deadline = time.monotonic() + 45.0
+            last_nudge = time.monotonic()
+            while time.monotonic() < deadline:
+                rec = (tx_iface.nodesByNum or {}).get(rx_node_num, {})
+                if rec.get("user", {}).get("publicKey"):
+                    break
+                if time.monotonic() - last_nudge > 15.0:
+                    rx.broadcast_nodeinfo_ping()
+                    nudge_nodeinfo(tx_iface)
+                    last_nudge = time.monotonic()
+                time.sleep(1.0)
+            else:
+                pytest.skip(
+                    f"bilateral PKI never completed ({tx_role}→{rx_role}); "
+                    "can't run the offline test without a warm baseline"
+                )
+
+            tx_iface.sendText(unique_pre, destinationId=rx_node_num, wantAck=True)
+            got = rx.wait_for(
+                lambda pkt: pkt.get("decoded", {}).get("text") == unique_pre,
+                timeout=30,
+            )
+            assert got is not None, (
+                f"baseline directed send ({tx_role}→{rx_role}) didn't land — "
+                "skipping offline test to avoid false positive"
+            )
+
+    # Step 3: power off RX. uhubctl skips the test with a clear message if
+    # the RX role isn't on a controllable hub.
+    try:
+        _power.power_off(rx_role)
+    except Exception as exc:  # noqa: BLE001
+        pytest.skip(f"can't power-control {rx_role!r}: {exc}")
+
+    try:
+        _power.wait_for_absence(rx_role, timeout_s=10.0)
+    except TimeoutError:
+        _power.power_on(rx_role)  # restore hub state before failing
+        resolve_port_by_role(rx_role, timeout_s=30.0)
+        pytest.fail(f"{rx_role!r} didn't disappear after power_off")
+
+    # Step 4: send to a peer that isn't there. Firmware will retry
+    # internally. We don't wait for an ACK (there won't be one); we just
+    # confirm TX's stack accepts the packet without crashing.
+    try:
+        with connect(port=tx_port) as tx_iface:
+            packet = tx_iface.sendText(
+                f"while-offline-{rx_role}",
+                destinationId=rx_node_num,
+                wantAck=True,
+            )
+            assert packet is not None
+            # Give firmware a moment to do a retry or two while RX is down.
+            time.sleep(5.0)
+    except Exception as exc:  # noqa: BLE001 — TX should survive the peer being gone
+        # Restore RX before reraising so the bench state is sane.
+        _power.power_on(rx_role)
+        resolve_port_by_role(rx_role, timeout_s=30.0)
+        raise AssertionError(f"TX crashed when sending to offline peer: {exc}") from exc
+
+    # Step 5: power RX back on + rediscover.
+    _power.power_on(rx_role)
+    time.sleep(0.5)
+    new_rx_port = resolve_port_by_role(rx_role, timeout_s=30.0)
+    hub_devices[rx_role] = new_rx_port
+
+    # Step 6 + 7: bilateral re-warmup + directed send that should now work.
+    with ReceiveCollector(new_rx_port, topic="meshtastic.receive.text") as rx:
+        # RX rebooted → its PKI cache is gone. Re-warm.
+        rx.broadcast_nodeinfo_ping()
+        with connect(port=tx_port) as tx_iface:
+            nudge_nodeinfo(tx_iface)
+            time.sleep(3.0)
+
+            got = None
+            for _attempt in range(3):
+                packet = tx_iface.sendText(
+                    unique_post,
+                    destinationId=rx_node_num,
+                    wantAck=True,
+                )
+                assert packet is not None
+                got = rx.wait_for(
+                    lambda pkt: pkt.get("decoded", {}).get("text") == unique_post,
+                    timeout=30,
+                )
+                if got is not None:
+                    break
+                rx.broadcast_nodeinfo_ping()
+                nudge_nodeinfo(tx_iface)
+                time.sleep(5.0)
+
+    assert got is not None, (
+        f"post-recovery directed send {unique_post!r} ({tx_role}→{rx_role}) "
+        "never landed — recovery path may be broken"
+    )

mcp-server/tests/recovery/__init__.py

@@ -0,0 +1,6 @@
+"""Recovery tier — exercises `uhubctl` power control end-to-end.
+
+Requires `uhubctl` installed AND at least one connected device on a
+PPPS-capable hub. The whole tier skips cleanly via
+`tests/recovery/conftest.py::_recovery_tier_guard` when either is missing.
+"""

mcp-server/tests/recovery/conftest.py

@@ -0,0 +1,44 @@
+"""Recovery-tier gating + shared helpers.
+
+Session-scoped guard skips the whole tier when uhubctl isn't installed.
+Tests under this directory assume uhubctl is callable AND that at least
+one hub role is detected on a PPPS-capable port.
+"""
+
+from __future__ import annotations
+
+import pytest
+
+
+@pytest.fixture(scope="session", autouse=True)
+def _recovery_tier_guard() -> None:
+    """Skip the tier when uhubctl is unavailable OR no device is on a
+    PPPS-capable hub. Prints the specific reason so operators know what
+    to fix."""
+    from tests import _power
+
+    if not _power.is_uhubctl_available():
+        pytest.skip(
+            "uhubctl not installed; recovery tier needs it. "
+            "Install via `brew install uhubctl` or `apt install uhubctl`.",
+            allow_module_level=True,
+        )
+
+    # Probe: can we even list hubs? (A macOS user without sudo gets a
+    # permission error here — we'd rather find out once at tier-start than
+    # 6 tests later.)
+    from meshtastic_mcp import uhubctl
+
+    try:
+        hubs = uhubctl.list_hubs()
+    except uhubctl.UhubctlError as exc:
+        pytest.skip(
+            f"uhubctl list failed: {exc}. Try the udev rules or `sudo` as a fallback.",
+            allow_module_level=True,
+        )
+
+    if not any(h["ppps"] for h in hubs):
+        pytest.skip(
+            "no PPPS-capable hubs detected — recovery tier has nothing to exercise.",
+            allow_module_level=True,
+        )

mcp-server/tests/recovery/test_list_hubs.py

@@ -0,0 +1,43 @@
+"""Smoke test: `uhubctl_list` returns a well-formed structure.
+
+No destructive action. Runs first in the tier as a sanity check that the
+tier's dependencies (uhubctl binary + permissions) are actually satisfied.
+"""
+
+from __future__ import annotations
+
+import pytest
+from meshtastic_mcp import uhubctl
+
+
+@pytest.mark.timeout(30)
+def test_list_hubs_returns_at_least_one_ppps_hub() -> None:
+    hubs = uhubctl.list_hubs()
+    assert hubs, "uhubctl found no hubs at all — is a USB hub connected?"
+    assert any(h["ppps"] for h in hubs), (
+        "no PPPS-capable hubs detected; power control won't work. "
+        "Check that the hub supports Per-Port Power Switching."
+    )
+
+
+@pytest.mark.timeout(30)
+def test_list_hubs_structure(hub_devices: dict[str, str]) -> None:
+    hubs = uhubctl.list_hubs()
+    for hub in hubs:
+        assert "location" in hub and hub["location"]
+        assert "ports" in hub and isinstance(hub["ports"], list)
+        for port in hub["ports"]:
+            assert "port" in port and isinstance(port["port"], int)
+            assert "status" in port
+
+    # At least one of the detected Meshtastic roles should show up in some
+    # port's device_vid — otherwise the recovery tier can't drive them.
+    seen_vids = {
+        p["device_vid"] for h in hubs for p in h["ports"] if p["device_vid"] is not None
+    }
+    expected_any = {0x239A, 0x303A, 0x10C4} & seen_vids
+    assert expected_any or not hub_devices, (
+        f"hub_devices detected roles {list(hub_devices)} but uhubctl sees "
+        f"VIDs {sorted(hex(v) for v in seen_vids)} — the devices may be on "
+        "a hub that uhubctl can't see (e.g. built-in laptop ports)."
+    )

mcp-server/tests/recovery/test_power_cycle_preserves_userprefs.py

@@ -0,0 +1,60 @@
+"""Hard reset via uhubctl must NOT wipe NVS. Verify the test profile's
+region + channel survive a power-cycle.
+
+Guards against a regression where a firmware change treats unexpected
+power loss as a factory-reset trigger (e.g. bad EEPROM wear-leveling,
+erase-on-boot-for-safety). Such a regression would be catastrophic for
+field deployments.
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp import admin, info
+from tests import _power
+from tests._port_discovery import resolve_port_by_role
+
+
+@pytest.mark.timeout(180)
+def test_lora_config_survives_power_cycle(
+    baked_single: dict[str, object],
+    test_profile: dict[str, object],
+) -> None:
+    role = baked_single["role"]
+    pre_port = baked_single["port"]
+
+    pre_config = admin.get_config(section="lora", port=pre_port)["config"]["lora"]
+    pre_region = pre_config.get("region")
+    pre_preset = pre_config.get("modem_preset")
+    assert pre_region, f"lora.region not set pre-cycle on {role}"
+
+    # Hard power-cycle.
+    _power.power_cycle(role, delay_s=2)
+    time.sleep(0.5)
+    new_port = resolve_port_by_role(role, timeout_s=30.0)
+    # Let the firmware complete boot before admin reads.
+    time.sleep(2.0)
+    # Quick readiness probe.
+    probe = info.device_info(port=new_port, timeout_s=10.0)
+    assert (
+        probe.get("my_node_num") is not None
+    ), f"device {role!r} didn't respond after power-cycle"
+
+    post_config = admin.get_config(section="lora", port=new_port)["config"]["lora"]
+    post_region = post_config.get("region")
+    post_preset = post_config.get("modem_preset")
+
+    assert post_region == pre_region, (
+        f"lora.region wiped by power-cycle on {role}: "
+        f"pre={pre_region!r} post={post_region!r}"
+    )
+    assert post_preset == pre_preset, (
+        f"lora.modem_preset wiped by power-cycle on {role}: "
+        f"pre={pre_preset!r} post={post_preset!r}"
+    )
+
+    # Channel-0 name should also match the test profile.
+    pri_ch = admin.get_channel_url(port=new_port)
+    assert pri_ch.get("url"), f"channel URL empty after power-cycle on {role}"

mcp-server/tests/recovery/test_power_cycle_roundtrip.py

@@ -0,0 +1,61 @@
+"""Full power-cycle round-trip: off → verify gone → on → verify identity
+preserved.
+
+Parametrized over every connected role. Validates both the uhubctl
+plumbing AND that the device survives a hard reset with the same
+`my_node_num` (no firmware-level identity regeneration).
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp import info
+from tests import _power
+from tests._port_discovery import resolve_port_by_role
+
+
+@pytest.mark.timeout(180)
+def test_power_cycle_preserves_node_identity(
+    baked_single: dict[str, object],
+) -> None:
+    role = baked_single["role"]
+    pre_port = baked_single["port"]
+    pre_node_num = baked_single["my_node_num"]
+    pre_fw = baked_single.get("firmware_version")
+
+    # Record pre-cycle state.
+    pre_info = info.device_info(port=pre_port, timeout_s=5.0)
+    assert pre_info.get("my_node_num") == pre_node_num
+
+    # Power off; confirm the device actually disappears from list_devices.
+    _power.power_off(role)
+    try:
+        _power.wait_for_absence(role, timeout_s=10.0)
+    except TimeoutError:
+        # If it didn't disappear, power it back on so we don't leave the
+        # hub in a weird state for the next test.
+        _power.power_on(role)
+        resolve_port_by_role(role, timeout_s=30.0)
+        pytest.fail(f"device {role!r} stayed visible after power_off")
+
+    # Power back on + re-discover port.
+    _power.power_on(role)
+    time.sleep(0.5)  # head-start before polling
+    new_port = resolve_port_by_role(role, timeout_s=30.0)
+
+    # Give the firmware a moment to finish boot before we hit it with admin.
+    time.sleep(2.0)
+
+    post_info = info.device_info(port=new_port, timeout_s=10.0)
+    assert post_info.get("my_node_num") == pre_node_num, (
+        f"my_node_num changed across power-cycle: pre={pre_node_num:#x} "
+        f"post={post_info.get('my_node_num'):#x}"
+    )
+    # Firmware version must match (same bake, not a re-flash).
+    if pre_fw:
+        assert post_info.get("firmware_version") == pre_fw, (
+            f"firmware changed across cycle: pre={pre_fw} "
+            f"post={post_info.get('firmware_version')}"
+        )

mcp-server/tests/tool_coverage.py

@@ -73,6 +73,13 @@ _TOOL_MAP: dict[str, tuple[str, str]] = {
     "reboot": ("meshtastic_mcp.admin", "reboot"),
     "shutdown": ("meshtastic_mcp.admin", "shutdown"),
     "factory_reset": ("meshtastic_mcp.admin", "factory_reset"),
+    "send_input_event": ("meshtastic_mcp.admin", "send_input_event"),
+    # `capture_screen` in server.py calls camera.get_camera — instrument that.
+    "capture_screen": ("meshtastic_mcp.camera", "get_camera"),
+    # USB power control via uhubctl.
+    "uhubctl_list": ("meshtastic_mcp.uhubctl", "list_hubs"),
+    "uhubctl_power": ("meshtastic_mcp.uhubctl", "power_on"),
+    "uhubctl_cycle": ("meshtastic_mcp.uhubctl", "cycle"),
     # USERPREFS
     "userprefs_manifest": ("meshtastic_mcp.userprefs", "build_manifest"),
     "userprefs_get": ("meshtastic_mcp.userprefs", "read_state"),

mcp-server/tests/ui/__init__.py

@@ -0,0 +1,7 @@
+"""UI tier — input-broker-driven screen navigation tests.
+
+Only runs when a screen-bearing role (esp32s3/heltec-v3) is present on the
+hub AND the firmware was baked with `enable_ui_log=True` (so the
+`Screen: frame N/M name=... reason=...` log lines are emitted). The
+`tests/ui/conftest.py` fixture forces that bake stamp.
+"""

mcp-server/tests/ui/_screen_log.py

@@ -0,0 +1,176 @@
+"""Parse `Screen: frame N/M name=X reason=Y` log lines from `_debug_log_buffer`.
+
+The firmware emits one line per frame transition when
+`USERPREFS_UI_TEST_LOG` is defined (see src/graphics/Screen.cpp). Tests use
+these helpers to assert which frame is shown / to wait for a transition to
+settle before taking a camera capture.
+"""
+
+from __future__ import annotations
+
+import re
+import time
+from dataclasses import dataclass
+from typing import Iterable, Iterator
+
+FRAME_RE = re.compile(
+    r"Screen: frame (?P<idx>\d+)/(?P<count>\d+) name=(?P<name>\S+) reason=(?P<reason>\S+)"
+)
+
+
+@dataclass(frozen=True)
+class FrameEvent:
+    idx: int
+    count: int
+    name: str
+    reason: str
+    raw: str
+
+    @classmethod
+    def parse(cls, line: str) -> "FrameEvent | None":
+        m = FRAME_RE.search(line)
+        if not m:
+            return None
+        return cls(
+            idx=int(m["idx"]),
+            count=int(m["count"]),
+            name=m["name"],
+            reason=m["reason"],
+            raw=line,
+        )
+
+
+def iter_frame_events(lines: Iterable[str]) -> Iterator[FrameEvent]:
+    for line in lines:
+        evt = FrameEvent.parse(line)
+        if evt is not None:
+            yield evt
+
+
+def get_current_frame(lines: list[str]) -> FrameEvent | None:
+    """Return the most recent FrameEvent in `lines`, or None if none found."""
+    for line in reversed(lines):
+        evt = FrameEvent.parse(line)
+        if evt is not None:
+            return evt
+    return None
+
+
+def wait_for_frame(
+    lines: list[str],
+    expected_name: str,
+    *,
+    timeout_s: float = 5.0,
+    poll_interval_s: float = 0.1,
+    reason: str | None = None,
+) -> FrameEvent:
+    """Poll `lines` (the `_debug_log_buffer`) until a FrameEvent with
+    `name=expected_name` appears after the call started. Raises TimeoutError
+    with context if it doesn't arrive in `timeout_s`.
+
+    `reason` optionally filters to events matching a specific cause
+    (e.g. `"fn_f1"`, `"next"`, `"rebuild"`).
+    """
+    start_idx = len(lines)
+    deadline = time.monotonic() + timeout_s
+    last: FrameEvent | None = None
+    while time.monotonic() < deadline:
+        # Scan only lines appended since we started waiting.
+        for line in lines[start_idx:]:
+            evt = FrameEvent.parse(line)
+            if evt is None:
+                continue
+            last = evt
+            if evt.name == expected_name and (reason is None or evt.reason == reason):
+                return evt
+        time.sleep(poll_interval_s)
+
+    seen = [e.name for e in iter_frame_events(lines[start_idx:])]
+    raise TimeoutError(
+        f"frame name={expected_name!r} reason={reason!r} not seen in {timeout_s}s; "
+        f"saw {len(seen)} transition(s): {seen!r}; last={last!r}"
+    )
+
+
+def wait_for_any_frame(
+    lines: list[str],
+    *,
+    timeout_s: float = 5.0,
+    poll_interval_s: float = 0.1,
+) -> FrameEvent:
+    """Wait for ANY frame transition to appear after call-start. Useful for
+    `no-op` tests that want to confirm a transition did NOT happen (via
+    TimeoutError) vs. one that did.
+    """
+    start_idx = len(lines)
+    deadline = time.monotonic() + timeout_s
+    while time.monotonic() < deadline:
+        for line in lines[start_idx:]:
+            evt = FrameEvent.parse(line)
+            if evt is not None:
+                return evt
+        time.sleep(poll_interval_s)
+    raise TimeoutError(f"no frame transition in {timeout_s}s")
+
+
+def wait_for_reason(
+    lines: list[str],
+    reason: str,
+    *,
+    timeout_s: float = 5.0,
+    poll_interval_s: float = 0.1,
+) -> FrameEvent:
+    """Wait for a frame event with `reason=<reason>` after call-start.
+
+    Matches only on `reason` — useful when the caller knows *why* a
+    transition should happen (e.g. `fn_f1`, `rebuild`) but not which named
+    frame the firmware will land on for this particular board.
+    """
+    start_idx = len(lines)
+    deadline = time.monotonic() + timeout_s
+    last: FrameEvent | None = None
+    while time.monotonic() < deadline:
+        for line in lines[start_idx:]:
+            evt = FrameEvent.parse(line)
+            if evt is None:
+                continue
+            last = evt
+            if evt.reason == reason:
+                return evt
+        time.sleep(poll_interval_s)
+    raise TimeoutError(
+        f"no frame with reason={reason!r} in {timeout_s}s; last={last!r}"
+    )
+
+
+def assert_no_frame_change(
+    lines: list[str],
+    *,
+    wait_s: float = 2.0,
+) -> None:
+    """Assert that NO new FrameEvent lines arrive within `wait_s`.
+
+    Used by idempotency / no-op tests (e.g. BACK on home frame).
+    """
+    start_idx = len(lines)
+    time.sleep(wait_s)
+    new = [
+        e for e in (FrameEvent.parse(ln) for ln in lines[start_idx:]) if e is not None
+    ]
+    if new:
+        raise AssertionError(
+            f"expected no frame change in {wait_s}s, but saw {len(new)} event(s): "
+            f"{[(e.reason, e.name) for e in new]!r}"
+        )
+
+
+__all__ = [
+    "FRAME_RE",
+    "FrameEvent",
+    "assert_no_frame_change",
+    "get_current_frame",
+    "iter_frame_events",
+    "wait_for_any_frame",
+    "wait_for_frame",
+    "wait_for_reason",
+]

mcp-server/tests/ui/conftest.py

@@ -0,0 +1,381 @@
+"""UI-tier fixtures: camera lifecycle, OCR warmup, per-test frame capture,
+and a `ui_home_state` autouse guard that resets to the home frame before
+every test (prevents state bleed if a prior test exited inside a menu).
+
+The camera + OCR modules live in `meshtastic_mcp/{camera,ocr}.py` (production
+code, so the `capture_screen` MCP tool can share them). These fixtures wire
+them into pytest + write per-test captures to `tests/ui_captures/…`.
+"""
+
+from __future__ import annotations
+
+import re
+import shutil
+import time
+from pathlib import Path
+from typing import Any, Iterator
+
+import pytest
+from meshtastic_mcp import admin as admin_mod
+from meshtastic_mcp import camera as camera_mod
+from meshtastic_mcp import ocr as ocr_mod
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import FrameEvent, get_current_frame, wait_for_frame
+
+# Roles that carry a screen the UI tier can drive. Only esp32s3 (heltec-v3
+# SSD1306) qualifies today — nrf52 (rak4631) has no display.
+UI_CAPABLE_ROLES = ("esp32s3",)
+
+# Where per-test captures land. One subdirectory per session seed, then per
+# sanitized test nodeid — identical pattern to other pytest artifacts.
+CAPTURES_ROOT = Path(__file__).resolve().parent.parent / "ui_captures"
+
+
+def _sanitize_nodeid(nodeid: str) -> str:
+    return re.sub(r"[^a-zA-Z0-9_.-]+", "_", nodeid)
+
+
+# ---------- Role gating ----------------------------------------------------
+
+
+@pytest.fixture
+def ui_capable_role(request: pytest.FixtureRequest, hub_devices: dict[str, Any]) -> str:
+    """Resolve the single role the UI tier drives.
+
+    Today that's `esp32s3`. Skips if the hub doesn't have one. A future
+    multi-screen hub could pick a role per parametrization.
+    """
+    for role in UI_CAPABLE_ROLES:
+        if role in hub_devices:
+            return role
+    pytest.skip(
+        f"no UI-capable role on hub; need one of {UI_CAPABLE_ROLES} in {sorted(hub_devices)}"
+    )
+
+
+@pytest.fixture
+def ui_port(ui_capable_role: str, hub_devices: dict[str, Any]) -> str:
+    port = (
+        hub_devices[ui_capable_role].get("port")
+        if isinstance(hub_devices[ui_capable_role], dict)
+        else hub_devices[ui_capable_role]
+    )
+    if not port:
+        pytest.skip(f"{ui_capable_role!r} has no usable port")
+    return port
+
+
+# ---------- Camera + OCR session fixtures ---------------------------------
+
+
+@pytest.fixture(scope="session")
+def camera(ui_capable_role_session: str | None) -> Iterator[camera_mod.CameraBackend]:
+    """Session-scoped camera backend. Closed at teardown.
+
+    Backend + device selected by env vars (see `meshtastic_mcp.camera`).
+    Falls through to `NullBackend` when no camera is configured, so the
+    tests run end-to-end on machines without hardware; they just won't
+    have useful images.
+    """
+    role = ui_capable_role_session or "esp32s3"
+    cam = camera_mod.get_camera(role)
+    try:
+        yield cam
+    finally:
+        cam.close()
+
+
+@pytest.fixture(scope="session")
+def ui_capable_role_session(hub_devices: dict[str, Any]) -> str | None:
+    """Session-scoped lookup mirroring `ui_capable_role` but non-skipping.
+
+    Used by the `camera` session fixture so it doesn't depend on a
+    test-scoped skip.
+    """
+    for role in UI_CAPABLE_ROLES:
+        if role in hub_devices:
+            return role
+    return None
+
+
+@pytest.fixture(scope="session", autouse=True)
+def _ocr_warm() -> None:
+    """Pay easyocr's ~100 MB / cold-start cost ONCE per session.
+
+    Subsequent `ocr_text()` calls hit the cached reader and return quickly.
+    Swallows errors — if OCR isn't installed, warm is a no-op.
+    """
+    try:
+        ocr_mod.warm()
+    except Exception:  # noqa: BLE001 — belt: never block the suite on OCR init
+        pass
+
+
+@pytest.fixture(scope="session")
+def _ui_screen_kept_on(
+    ui_capable_role_session: str | None, hub_devices: dict[str, Any]
+) -> Iterator[None]:
+    """Keep the OLED on throughout the UI tier so input events aren't dropped.
+
+    Why: `InputBroker::handleInputEvent` (src/input/InputBroker.cpp:118-122)
+    silently DROPS any event that arrives while the screen is off — it just
+    wakes the screen and returns. Every first event in each test would
+    disappear. We set `display.screen_on_secs = 86400` at session start
+    (effectively "always on" for the test window) and restore the prior
+    value at teardown.
+    """
+    if ui_capable_role_session is None:
+        yield
+        return
+
+    hub_entry = hub_devices[ui_capable_role_session]
+    port = hub_entry.get("port") if isinstance(hub_entry, dict) else hub_entry
+    if not port:
+        yield
+        return
+
+    original: int | None = None
+    try:
+        current = admin_mod.get_config(section="display", port=port)
+        original = int(
+            current.get("config", {}).get("display", {}).get("screen_on_secs") or 0
+        )
+    except Exception:  # noqa: BLE001
+        pass
+
+    try:
+        admin_mod.set_config("display.screen_on_secs", 86400, port=port)
+        # Send one wake event so the screen is actually ON going into the
+        # first test. The event itself gets dropped (screenWasOff), but the
+        # wake side-effect sticks.
+        try:
+            admin_mod.send_input_event(event_code=int(InputEventCode.FN_F1), port=port)
+        except Exception:  # noqa: BLE001
+            pass
+        time.sleep(1.5)  # Let the screen finish its wake transition.
+    except (
+        Exception
+    ):  # noqa: BLE001 — best-effort; ui_home_state surfaces the real error
+        pass
+
+    try:
+        yield
+    finally:
+        if original is not None:
+            try:
+                admin_mod.set_config("display.screen_on_secs", original, port=port)
+            except Exception:  # noqa: BLE001
+                pass
+
+
+# ---------- Per-test capture + transcript ----------------------------------
+
+
+class FrameCapture:
+    """Per-test capture recorder. Created once per test via the
+    `frame_capture` fixture; call with a label to snapshot the screen.
+    """
+
+    def __init__(
+        self,
+        cam: camera_mod.CameraBackend,
+        dir_path: Path,
+        lines: list[str],
+        nodeid: str,
+    ) -> None:
+        self._cam = cam
+        self._dir = dir_path
+        self._lines = lines
+        self._nodeid = nodeid
+        self._step = 0
+        self.captures: list[dict[str, Any]] = []
+        self._transcript_path = dir_path / "transcript.md"
+        self._dir.mkdir(parents=True, exist_ok=True)
+        self._transcript_path.write_text(
+            f"# {nodeid} — {time.strftime('%Y-%m-%dT%H:%M:%SZ', time.gmtime())}\n\n",
+            encoding="utf-8",
+        )
+
+    def __call__(self, label: str) -> dict[str, Any]:
+        self._step += 1
+        stem = f"{self._step:03d}-{re.sub(r'[^a-zA-Z0-9_-]+', '-', label)}"
+        png_path = self._dir / f"{stem}.png"
+        ocr_path = self._dir / f"{stem}.ocr.txt"
+
+        try:
+            png = self._cam.capture()
+        except Exception as exc:  # noqa: BLE001
+            png = b""
+            ocr_str = f"[capture error: {exc}]"
+        else:
+            camera_mod.save_capture(png, png_path)
+            try:
+                ocr_str = ocr_mod.ocr_text(png)
+            except Exception as exc:  # noqa: BLE001
+                ocr_str = f"[ocr error: {exc}]"
+            ocr_path.write_text(ocr_str or "", encoding="utf-8")
+
+        frame = get_current_frame(self._lines)
+        entry: dict[str, Any] = {
+            "step": self._step,
+            "label": label,
+            "png_path": str(png_path) if png else None,
+            "ocr_text": ocr_str,
+            "frame": (
+                {
+                    "idx": frame.idx,
+                    "name": frame.name,
+                    "reason": frame.reason,
+                }
+                if frame is not None
+                else None
+            ),
+        }
+        self.captures.append(entry)
+
+        with self._transcript_path.open("a", encoding="utf-8") as fh:
+            frame_str = (
+                f"frame {frame.idx}/{frame.count} name={frame.name} reason={frame.reason}"
+                if frame is not None
+                else "frame <none>"
+            )
+            ocr_summary = (ocr_str or "").replace("\n", " / ")[:80]
+            fh.write(
+                f"{self._step}. **{label}** — {frame_str} — OCR: `{ocr_summary}`\n"
+            )
+        return entry
+
+
+@pytest.fixture
+def frame_capture(
+    request: pytest.FixtureRequest,
+    camera: camera_mod.CameraBackend,
+    session_seed: str,
+) -> Iterator[FrameCapture]:
+    nodeid = _sanitize_nodeid(request.node.nodeid)
+    dir_path = CAPTURES_ROOT / session_seed / nodeid
+    # Fresh directory per test run so reruns don't mix old and new images.
+    if dir_path.exists():
+        shutil.rmtree(dir_path)
+
+    lines = getattr(request.node, "_debug_log_buffer", [])
+    fc = FrameCapture(camera, dir_path, lines, nodeid)
+    # Stash so pytest_runtest_makereport can embed captures in HTML extras.
+    request.node._ui_captures = fc.captures  # type: ignore[attr-defined]
+    yield fc
+
+
+# ---------- Pre-test home-state reset --------------------------------------
+
+
+def _send_event(port: str, event: InputEventCode) -> None:
+    try:
+        admin_mod.send_input_event(event_code=int(event), port=port)
+    except Exception:  # noqa: BLE001
+        # Treat a failed event as soft — the subsequent frame-log assertion
+        # surfaces the real problem with better context.
+        pass
+
+
+@pytest.fixture(autouse=True)
+def ui_home_state(
+    request: pytest.FixtureRequest,
+    hub_devices: dict[str, Any],
+    _ui_screen_kept_on: None,
+) -> Iterator[None]:
+    """Before every UI test, jump to frame 0 (usually `home`) via FN_F1 and
+    confirm the device emitted the expected frame log.
+
+    Why FN_F1 (not BACK): FN_F1 maps to `switchToFrame(0)` and ALWAYS
+    produces a `reason=fn_f1` log line, regardless of whatever frame the
+    prior test left us on. BACK is context-sensitive (dismisses overlays
+    on some frames, no-op on others) and can silently fail to transition.
+
+    This fixture doubles as the macro-presence detector: if no `fn_f1`
+    log arrives within 5 s, the firmware almost certainly wasn't baked
+    with `USERPREFS_UI_TEST_LOG`. Skip the tier with an actionable hint
+    instead of letting every test body fail with a confusing assertion.
+
+    Autouse scope is restricted to `tests/ui/` by virtue of this fixture
+    living in that directory's conftest.py — no explicit nodeid guard
+    needed (and earlier attempts at one were wrong, matching `/tests/ui/`
+    against a nodeid that has no leading slash).
+    """
+    role = next((r for r in UI_CAPABLE_ROLES if r in hub_devices), None)
+    if role is None:
+        yield
+        return
+
+    hub_entry = hub_devices[role]
+    port = hub_entry.get("port") if isinstance(hub_entry, dict) else hub_entry
+    lines: list[str] = getattr(request.node, "_debug_log_buffer", [])
+    start_len = len(lines)
+
+    # First: a wake event. The screen should already be kept on by
+    # `_ui_screen_kept_on`, but belt + suspenders — if it somehow
+    # powered off (sleep after factory_reset, etc.), this first FN_F1
+    # gets dropped by InputBroker's screenWasOff guard. That's fine;
+    # the second FN_F1 below lands cleanly.
+    _send_event(port, InputEventCode.FN_F1)
+    time.sleep(0.4)
+    _send_event(port, InputEventCode.FN_F1)
+
+    # Wait for the fn_f1 transition log. Any new `reason=fn_f1` line
+    # after call-start counts — we don't care about the name (it should
+    # be `home` or `deviceFocused` depending on board-specific frame order).
+    from ._screen_log import wait_for_reason
+
+    try:
+        wait_for_reason(lines, "fn_f1", timeout_s=5.0)
+    except TimeoutError:
+        # One more try — FreeRTOS queue may be draining slowly.
+        _send_event(port, InputEventCode.FN_F1)
+        try:
+            wait_for_reason(lines, "fn_f1", timeout_s=5.0)
+        except TimeoutError:
+            # Look at what the _debug_log_buffer actually contains to
+            # disambiguate "macro off" from "macro on but event lost".
+            frame_lines = [ln for ln in lines[start_len:] if "Screen: frame" in ln]
+            processing_lines = [
+                ln for ln in lines[start_len:] if "Processing input event" in ln
+            ]
+            if frame_lines:
+                pytest.skip(
+                    f"ui_home_state: events fire but none reach Screen "
+                    f"(saw {len(frame_lines)} frame line(s), "
+                    f"{len(processing_lines)} admin inject(s)). "
+                    f"Device may be in an unusual state — try `--force-bake`."
+                )
+            else:
+                pytest.skip(
+                    "ui_home_state: no `Screen: frame` log after FN_F1. "
+                    "Firmware not baked with USERPREFS_UI_TEST_LOG — "
+                    "run with `--force-bake` to reflash, or verify the "
+                    "macro is active in the bake."
+                )
+    yield
+
+
+# ---------- Small helpers reused by tests ---------------------------------
+
+
+def send_event(
+    port: str, event: InputEventCode | int | str, **kwargs: Any
+) -> dict[str, Any]:
+    """Thin wrapper so tests read `send_event(port, InputEventCode.RIGHT)`."""
+    return admin_mod.send_input_event(event_code=event, port=port, **kwargs)
+
+
+__all__ = [
+    "FrameCapture",
+    "UI_CAPABLE_ROLES",
+    "send_event",
+    "wait_for_frame",
+    "FrameEvent",
+]
+
+
+# Make the helpers discoverable to test modules via `from .conftest import …`.
+# pytest auto-loads conftest.py, but the symbols above are also re-exported
+# for readability in the test files.

mcp-server/tests/ui/test_input_fn_jump.py

@@ -0,0 +1,61 @@
+"""FN_F1..F5 directly jumps to frame 0..4 via Screen::handleInputEvent.
+
+Parametrized over the 5 function keys. Each expects a
+`Screen: frame <idx>/<count> name=... reason=fn_f<k>` log line, with
+`idx == k-1`. We don't hardcode the frame *name* because the layout
+depends on which modules are compiled in for this board.
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import get_current_frame, wait_for_reason
+from .conftest import FrameCapture, send_event
+
+
+@pytest.mark.timeout(120)
+@pytest.mark.parametrize(
+    "event,expected_idx,reason",
+    [
+        (InputEventCode.FN_F1, 0, "fn_f1"),
+        (InputEventCode.FN_F2, 1, "fn_f2"),
+        (InputEventCode.FN_F3, 2, "fn_f3"),
+        (InputEventCode.FN_F4, 3, "fn_f4"),
+        (InputEventCode.FN_F5, 4, "fn_f5"),
+    ],
+    ids=["FN_F1", "FN_F2", "FN_F3", "FN_F4", "FN_F5"],
+)
+def test_fn_jump_direct_frame(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+    event: InputEventCode,
+    expected_idx: int,
+    reason: str,
+) -> None:
+    lines: list[str] = request.node._debug_log_buffer
+    start = get_current_frame(lines)
+    assert start is not None, "no frame log yet — USERPREFS_UI_TEST_LOG not wired?"
+    assert start.name in (
+        "home",
+        "deviceFocused",
+    ), f"setup expected frame 0 landing, got {start.name!r}"
+    frame_capture("initial")
+
+    if start.count <= expected_idx:
+        pytest.skip(
+            f"device has {start.count} frames; FN_F{expected_idx + 1} needs > {expected_idx}"
+        )
+
+    send_event(ui_port, event)
+    time.sleep(0.1)
+    evt = wait_for_reason(lines, reason, timeout_s=5.0)
+    assert evt.idx == expected_idx, (
+        f"FN_F{expected_idx + 1} expected idx={expected_idx}, got {evt.idx} "
+        f"(name={evt.name}, count={evt.count})"
+    )
+    frame_capture(f"after-{reason}")

mcp-server/tests/ui/test_input_fn_oob.py

@@ -0,0 +1,61 @@
+"""Out-of-bounds FN_F5 when the device has <5 frames: no crash, idx unchanged.
+
+`Screen::handleInputEvent` dispatches FN_F5 unconditionally to
+`ui->switchToFrame(4)`. The OLEDDisplayUi library typically clamps or
+silently ignores out-of-range indices, but firmware bugs have existed
+here — this test protects against a regression that would wedge the UI.
+
+If this test fails, first check: did the device actually crash (Guru
+Meditation in the log)? Or did switchToFrame accept an OOB index and
+leave the UI blank?
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import get_current_frame, wait_for_reason
+from .conftest import FrameCapture, send_event
+
+
+@pytest.mark.timeout(90)
+def test_fn_f5_out_of_bounds(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+) -> None:
+    lines: list[str] = request.node._debug_log_buffer
+    start = get_current_frame(lines)
+    assert start is not None
+
+    if start.count > 5:
+        pytest.skip(
+            f"device has {start.count} frames; FN_F5 is in-bounds — not testing OOB here"
+        )
+
+    frame_capture("initial-home")
+    send_event(ui_port, InputEventCode.FN_F5)
+    time.sleep(0.5)
+
+    try:
+        wait_for_reason(lines, "fn_f5", timeout_s=3.0)
+    except TimeoutError:
+        # Firmware may have ignored the event entirely — acceptable.
+        pass
+
+    # Capture whatever is on screen (OCR will tell us if something weird
+    # happened). Device must remain responsive — subsequent events should
+    # still land.
+    frame_capture("after-fn_f5-oob")
+
+    # Send a RIGHT to confirm the UI is still alive. If this times out,
+    # the OOB switchToFrame wedged the UI.
+    send_event(ui_port, InputEventCode.RIGHT)
+    post = wait_for_reason(lines, "next", timeout_s=5.0)
+    assert (
+        post is not None
+    ), "UI wedged after OOB FN_F5 — RIGHT no longer produces frame log"
+    frame_capture("after-recovery-right")

mcp-server/tests/ui/test_input_menu.py

@@ -0,0 +1,68 @@
+"""SELECT on the home frame opens the home menu; BACK closes it.
+
+The home menu is an overlay (menuHandler::homeBaseMenu), not a frame
+transition — so we verify via OCR difference between before/after
+captures rather than a `Screen: frame` log line. The underlying
+mechanism is still InputBroker → Screen::handleInputEvent → menu
+callback.
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import get_current_frame
+from .conftest import FrameCapture, send_event
+
+
+@pytest.mark.timeout(120)
+def test_select_opens_home_menu(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+) -> None:
+    lines: list[str] = request.node._debug_log_buffer
+    start = get_current_frame(lines)
+    assert start is not None
+    if start.name not in ("home", "deviceFocused"):
+        pytest.skip(
+            f"SELECT on {start.name!r} doesn't open homeBaseMenu; "
+            "test is only valid when the landing frame is home/deviceFocused"
+        )
+
+    initial = frame_capture("initial")
+    send_event(ui_port, InputEventCode.SELECT)
+    time.sleep(0.8)
+    opened = frame_capture("after-select")
+
+    # The menu is an overlay (not a frame change). We cannot use log
+    # assertion — instead, OCR should differ because a menu list is now
+    # drawn on top.
+    initial_text = (initial.get("ocr_text") or "").strip()
+    opened_text = (opened.get("ocr_text") or "").strip()
+    if initial_text and opened_text:
+        # When OCR is available, require *some* difference between the two
+        # frames — even a single menu title changes the transcribed text.
+        assert initial_text != opened_text, (
+            f"expected OCR diff after SELECT; both read {initial_text!r}. "
+            "If both are empty, check camera alignment + OCR backend."
+        )
+
+    # Back out — the menu dismisses on BACK.
+    send_event(ui_port, InputEventCode.BACK)
+    time.sleep(0.8)
+    closed = frame_capture("after-back")
+
+    # Soft check: OCR after BACK should look different from the menu
+    # (either back to home or onto a previous frame — BACK's exact
+    # behavior when the menu is up vs. not-up varies). We don't assert
+    # equality because OLED rendering is pixel-stable but camera sampling
+    # introduces noise.
+    if opened_text and closed.get("ocr_text"):
+        close_text = (closed.get("ocr_text") or "").strip()
+        assert (
+            close_text != opened_text
+        ), f"after BACK, OCR still looks like the menu: {close_text!r}"

mcp-server/tests/ui/test_input_message_scroll.py

@@ -0,0 +1,60 @@
+"""Once we navigate to the textMessage frame, UP/DOWN exercises the
+message-scroll path (or opens CannedMessages on empty devices).
+
+Weaker than a "no frame change" assertion because on a fresh bench
+device the message store is usually empty, and the firmware's UP
+handler in that case launches CannedMessage — which DOES rebuild
+frames. We just verify the path doesn't crash + produce captures for
+visual inspection.
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import get_current_frame, wait_for_frame
+from .conftest import FrameCapture, send_event
+
+
+@pytest.mark.timeout(180)
+def test_up_down_on_textmessage_survives(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+) -> None:
+    lines: list[str] = request.node._debug_log_buffer
+    frame_capture("initial")
+
+    # Walk RIGHT until we land on textMessage — up to 15 hops.
+    for _i in range(15):
+        send_event(ui_port, InputEventCode.RIGHT)
+        time.sleep(0.3)
+        current = get_current_frame(lines)
+        if current is not None and current.name == "textMessage":
+            break
+    else:
+        pytest.skip(
+            "couldn't reach textMessage frame within 15 RIGHTs — not present on this board"
+        )
+
+    wait_for_frame(lines, "textMessage", timeout_s=5.0)
+    frame_capture("on-textMessage")
+
+    # UP and DOWN exercise the message-scroll / canned-message-launch path.
+    # Capture after each so the HTML report shows any visual effect.
+    send_event(ui_port, InputEventCode.UP)
+    time.sleep(0.3)
+    frame_capture("after-up")
+
+    send_event(ui_port, InputEventCode.DOWN)
+    time.sleep(0.3)
+    frame_capture("after-down")
+
+    # Soft check: we should still be in a reachable frame (not wedged).
+    # The next test's `ui_home_state` will error out if the device is
+    # unresponsive, so we don't need a stricter guarantee here.
+    final = get_current_frame(lines)
+    assert final is not None, "no frame log after UP/DOWN — event path broke"

mcp-server/tests/ui/test_input_navigation.py

@@ -0,0 +1,93 @@
+"""INPUT_BROKER_RIGHT cycles forward through frames; INPUT_BROKER_LEFT backs.
+
+The simplest UI test: fire N RIGHT events and assert the frame index
+moves forward by N (modulo frameCount). Each step captures an image +
+OCR for the HTML report.
+"""
+
+from __future__ import annotations
+
+import time
+from typing import Any
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import get_current_frame, wait_for_frame
+from .conftest import FrameCapture, send_event
+
+
+@pytest.mark.timeout(120)
+def test_input_right_cycles_frames(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+) -> None:
+    lines: list[str] = request.node._debug_log_buffer
+    start = get_current_frame(lines)
+    assert start is not None, "no frame log yet — USERPREFS_UI_TEST_LOG not wired?"
+    # FN_F1 in ui_home_state lands on frame 0. The name at frame 0 varies
+    # by board (home on heltec-v3, deviceFocused on others) — accept either.
+    assert start.name in (
+        "home",
+        "deviceFocused",
+    ), f"setup expected home/deviceFocused at frame 0, got {start.name!r}"
+
+    frame_capture("initial")
+    visited = [start.idx]
+
+    for step in range(4):
+        send_event(ui_port, InputEventCode.RIGHT)
+        # Each RIGHT should bump the frame index by 1. The log fires with
+        # `reason=next` from showFrame(NEXT).
+        before_count = len(list(_frame_events(lines)))
+        deadline = time.monotonic() + 5.0
+        while time.monotonic() < deadline:
+            if len(list(_frame_events(lines))) > before_count:
+                break
+            time.sleep(0.1)
+        evt = get_current_frame(lines)
+        assert evt is not None
+        assert (
+            evt.reason == "next"
+        ), f"step {step}: expected reason=next, got {evt.reason!r}"
+        visited.append(evt.idx)
+        frame_capture(f"after-right-{step + 1}")
+
+    # Sanity: each index should differ from its predecessor.
+    diffs = [visited[i + 1] - visited[i] for i in range(len(visited) - 1)]
+    assert all(
+        d in (1, -(start.count - 1)) for d in diffs
+    ), f"expected monotonic +1 steps (or a wrap), got visited={visited} diffs={diffs}"
+
+
+@pytest.mark.timeout(120)
+def test_input_left_returns_to_home(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+) -> None:
+    """After RIGHT×3 + LEFT×3, we should end up back on the starting frame."""
+    lines: list[str] = request.node._debug_log_buffer
+    start = get_current_frame(lines)
+    assert start is not None
+    start_name = start.name
+    frame_capture("initial")
+    for _ in range(3):
+        send_event(ui_port, InputEventCode.RIGHT)
+        time.sleep(0.3)
+    frame_capture("after-right-3")
+
+    for _ in range(3):
+        send_event(ui_port, InputEventCode.LEFT)
+        time.sleep(0.3)
+
+    # Back to whichever frame we started on (home or deviceFocused).
+    wait_for_frame(lines, start_name, timeout_s=5.0)
+    frame_capture(f"after-left-3-back-{start_name}")
+
+
+def _frame_events(lines: list[str]) -> Any:
+    from ._screen_log import iter_frame_events
+
+    return iter_frame_events(lines)

mcp-server/tests/ui/test_input_node_scroll.py

@@ -0,0 +1,51 @@
+"""On the nodelist_nodes frame, UP/DOWN scrolls the list via
+`NodeListRenderer::scrollUp/scrollDown` (src/graphics/Screen.cpp:1779-1788).
+The firmware returns 0 before notifying observers, so no frame-change
+log fires. Verify the path doesn't crash and we stay on nodelist_nodes.
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import assert_no_frame_change, get_current_frame, wait_for_frame
+from .conftest import FrameCapture, send_event
+
+
+@pytest.mark.timeout(180)
+def test_up_down_on_nodelist_no_frame_change(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+) -> None:
+    lines: list[str] = request.node._debug_log_buffer
+    frame_capture("initial")
+
+    # Walk RIGHT until we land on nodelist_nodes.
+    for _i in range(15):
+        send_event(ui_port, InputEventCode.RIGHT)
+        time.sleep(0.3)
+        current = get_current_frame(lines)
+        if current is not None and current.name == "nodelist_nodes":
+            break
+    else:
+        pytest.skip("couldn't reach nodelist_nodes within 15 RIGHTs")
+
+    wait_for_frame(lines, "nodelist_nodes", timeout_s=5.0)
+    frame_capture("on-nodelist")
+
+    # UP/DOWN on nodelist scroll internally + `return 0` before
+    # notifyObservers — no frame-change log. Verify.
+    send_event(ui_port, InputEventCode.UP)
+    assert_no_frame_change(lines, wait_s=1.5)
+    send_event(ui_port, InputEventCode.DOWN)
+    assert_no_frame_change(lines, wait_s=1.5)
+
+    final = get_current_frame(lines)
+    assert (
+        final is not None and final.name == "nodelist_nodes"
+    ), f"UP/DOWN moved us off nodelist_nodes; now on {final!r}"
+    frame_capture("after-up-down")

mcp-server/tests/unit/test_input_event_codes.py

@@ -0,0 +1,90 @@
+"""Pin `InputEventCode` values to the firmware `input_broker_event` enum.
+
+If this test fails, someone changed the firmware enum (or this Python
+mirror) and they must stay in sync — the admin RPC sends these as u8
+wire values directly.
+
+Also exercises `coerce_event_code` for the happy + error paths.
+"""
+
+from __future__ import annotations
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode, coerce_event_code
+
+
+class TestInputEventCodeValues:
+    """These values MUST match src/input/InputBroker.h exactly."""
+
+    def test_navigation_keys(self) -> None:
+        assert int(InputEventCode.UP) == 17
+        assert int(InputEventCode.DOWN) == 18
+        assert int(InputEventCode.LEFT) == 19
+        assert int(InputEventCode.RIGHT) == 20
+
+    def test_action_keys(self) -> None:
+        assert int(InputEventCode.SELECT) == 10
+        assert int(InputEventCode.CANCEL) == 24
+        assert int(InputEventCode.BACK) == 27
+
+    def test_long_press_variants(self) -> None:
+        assert int(InputEventCode.SELECT_LONG) == 11
+        assert int(InputEventCode.UP_LONG) == 12
+        assert int(InputEventCode.DOWN_LONG) == 13
+
+    def test_fn_keys(self) -> None:
+        assert int(InputEventCode.FN_F1) == 0xF1
+        assert int(InputEventCode.FN_F2) == 0xF2
+        assert int(InputEventCode.FN_F3) == 0xF3
+        assert int(InputEventCode.FN_F4) == 0xF4
+        assert int(InputEventCode.FN_F5) == 0xF5
+
+    def test_system_events(self) -> None:
+        assert int(InputEventCode.SHUTDOWN) == 0x9B
+        assert int(InputEventCode.GPS_TOGGLE) == 0x9E
+        assert int(InputEventCode.SEND_PING) == 0xAF
+
+    def test_auto_increment_block(self) -> None:
+        # C enum: `BACK = 27, USER_PRESS, ALT_PRESS, ALT_LONG` → 28, 29, 30.
+        assert int(InputEventCode.USER_PRESS) == 28
+        assert int(InputEventCode.ALT_PRESS) == 29
+        assert int(InputEventCode.ALT_LONG) == 30
+
+
+class TestCoerceEventCode:
+    def test_int_passthrough(self) -> None:
+        assert coerce_event_code(20) == 20
+        assert coerce_event_code(0) == 0
+        assert coerce_event_code(255) == 255
+
+    def test_enum_passthrough(self) -> None:
+        assert coerce_event_code(InputEventCode.RIGHT) == 20
+        assert coerce_event_code(InputEventCode.FN_F1) == 0xF1
+
+    def test_name_case_insensitive(self) -> None:
+        assert coerce_event_code("right") == 20
+        assert coerce_event_code("RIGHT") == 20
+        assert coerce_event_code("Right") == 20
+
+    def test_input_broker_prefix_stripped(self) -> None:
+        assert coerce_event_code("INPUT_BROKER_FN_F1") == 0xF1
+        assert coerce_event_code("input_broker_select") == 10
+
+    def test_hyphen_and_underscore_equivalence(self) -> None:
+        assert coerce_event_code("fn-f1") == 0xF1
+
+    def test_int_out_of_range_raises(self) -> None:
+        with pytest.raises(ValueError, match="u8"):
+            coerce_event_code(256)
+        with pytest.raises(ValueError, match="u8"):
+            coerce_event_code(-1)
+
+    def test_unknown_name_raises(self) -> None:
+        with pytest.raises(ValueError, match="unknown event code name"):
+            coerce_event_code("NOT_A_KEY")
+
+    def test_wrong_type_raises(self) -> None:
+        with pytest.raises(TypeError):
+            coerce_event_code(1.5)  # type: ignore[arg-type]
+        with pytest.raises(TypeError):
+            coerce_event_code(None)  # type: ignore[arg-type]

mcp-server/tests/unit/test_uhubctl_parser.py

@@ -0,0 +1,148 @@
+"""Pin the `uhubctl` default-output parser against canned real-world samples.
+
+uhubctl's output format has been stable since v2.x but occasionally adds
+new hub-descriptor fields (e.g. the `, ppps` marker). The parser uses loose
+regexes to tolerate additions; this test keeps us honest.
+
+Samples captured from:
+- v2.6.0 on macOS (Homebrew) — two USB2 hubs, one populated with an
+  nRF52 and a CP2102, plus chained USB3 hubs.
+- v2.5.0 on Linux (hypothetical — reconstructed from the project README).
+"""
+
+from __future__ import annotations
+
+import pytest
+from meshtastic_mcp.uhubctl import (
+    ROLE_VIDS,
+    UhubctlError,
+    parse_list_output,
+)
+
+# Actual `uhubctl` stdout on the developer's macOS bench, Apr 2026.
+_SAMPLE_MACOS_V26 = """\
+Current status for hub 1-1.3 [2109:2817 VIA Labs, Inc. USB2.0 Hub, USB 2.10, 4 ports, ppps]
+  Port 1: 0100 power
+  Port 2: 0103 power enable connect [239a:8029 RAKwireless WisCore RAK4631 Board 920456B1E6972262]
+  Port 3: 0103 power enable connect [10c4:ea60 Silicon Labs CP2102 USB to UART Bridge Controller 0001]
+  Port 4: 0100 power
+Current status for hub 1-2.3 [2109:0817 VIA Labs, Inc. USB3.0 Hub, USB 3.10, 4 ports, ppps]
+  Port 1: 02a0 power 5gbps Rx.Detect
+  Port 2: 02a0 power 5gbps Rx.Detect
+  Port 3: 02a0 power 5gbps Rx.Detect
+  Port 4: 02a0 power 5gbps Rx.Detect
+Current status for hub 1-1 [2109:2817 VIA Labs, Inc. USB2.0 Hub, USB 2.10, 4 ports, ppps]
+  Port 1: 0100 power
+  Port 2: 0100 power
+  Port 3: 0503 power highspeed enable connect [2109:2817 VIA Labs, Inc. USB2.0 Hub, USB 2.10, 4 ports, ppps]
+  Port 4: 0100 power
+"""
+
+
+# Minimal Linux-style sample (fewer hubs, shows a non-PPPS hub).
+_SAMPLE_LINUX_NONPPPS = """\
+Current status for hub 2-1.4 [05e3:0608 GenesysLogic USB2.1 Hub, USB 2.10, 4 ports]
+  Port 1: 0507 power highspeed suspend enable connect [239a:0029 Adafruit Feather Bootloader]
+  Port 2: 0100 power
+  Port 3: 0100 power
+  Port 4: 0100 power
+"""
+
+
+class TestParseListOutput:
+    def test_parses_macos_sample_hub_count(self) -> None:
+        hubs = parse_list_output(_SAMPLE_MACOS_V26)
+        assert len(hubs) == 3
+
+    def test_parses_hub_location_and_vid(self) -> None:
+        hubs = parse_list_output(_SAMPLE_MACOS_V26)
+        via_hub = hubs[0]
+        assert via_hub["location"] == "1-1.3"
+        assert via_hub["vid"] == 0x2109
+        assert via_hub["pid"] == 0x2817
+        assert via_hub["ppps"] is True
+
+    def test_parses_port_with_device(self) -> None:
+        hubs = parse_list_output(_SAMPLE_MACOS_V26)
+        nrf52_hub = hubs[0]
+        port2 = next(p for p in nrf52_hub["ports"] if p["port"] == 2)
+        assert port2["device_vid"] == 0x239A
+        assert port2["device_pid"] == 0x8029
+        assert "RAKwireless" in port2["device_desc"]
+
+    def test_empty_port_has_no_device(self) -> None:
+        hubs = parse_list_output(_SAMPLE_MACOS_V26)
+        nrf52_hub = hubs[0]
+        port1 = next(p for p in nrf52_hub["ports"] if p["port"] == 1)
+        assert port1["device_vid"] is None
+        assert port1["device_pid"] is None
+        assert port1["device_desc"] is None
+
+    def test_ports_count(self) -> None:
+        hubs = parse_list_output(_SAMPLE_MACOS_V26)
+        for hub in hubs:
+            assert len(hub["ports"]) == 4  # each sample hub has 4 ports
+
+    def test_non_ppps_hub_flagged(self) -> None:
+        hubs = parse_list_output(_SAMPLE_LINUX_NONPPPS)
+        assert len(hubs) == 1
+        assert hubs[0]["ppps"] is False
+
+    def test_handles_empty_input(self) -> None:
+        assert parse_list_output("") == []
+
+    def test_handles_malformed_lines_gracefully(self) -> None:
+        # Lines that don't match HUB_RE or PORT_RE are ignored silently.
+        garbage = "uhubctl: warning: something weird\n" + _SAMPLE_LINUX_NONPPPS
+        hubs = parse_list_output(garbage)
+        assert len(hubs) == 1
+
+
+class TestRoleVids:
+    def test_nrf52_mapped(self) -> None:
+        assert 0x239A in ROLE_VIDS["nrf52"]
+
+    def test_esp32s3_covers_both_vids(self) -> None:
+        # Espressif native USB + CP2102 USB-UART on heltec-v3 boards.
+        assert 0x303A in ROLE_VIDS["esp32s3"]
+        assert 0x10C4 in ROLE_VIDS["esp32s3"]
+
+
+class TestResolveTargetErrorPaths:
+    def test_unknown_role_raises(self, monkeypatch: pytest.MonkeyPatch) -> None:
+        from meshtastic_mcp.uhubctl import resolve_target
+
+        # Clear any env-var pinning that might make this pass accidentally.
+        for key in (
+            "MESHTASTIC_UHUBCTL_LOCATION_FLUX",
+            "MESHTASTIC_UHUBCTL_PORT_FLUX",
+        ):
+            monkeypatch.delenv(key, raising=False)
+        with pytest.raises(UhubctlError, match="unknown role"):
+            resolve_target("flux")
+
+    def test_invalid_env_port_raises(self, monkeypatch: pytest.MonkeyPatch) -> None:
+        from meshtastic_mcp.uhubctl import resolve_target
+
+        monkeypatch.setenv("MESHTASTIC_UHUBCTL_LOCATION_NRF52", "1-1.3")
+        monkeypatch.setenv("MESHTASTIC_UHUBCTL_PORT_NRF52", "not-an-int")
+        with pytest.raises(UhubctlError, match="not a valid integer"):
+            resolve_target("nrf52")
+
+    def test_env_var_pinning_wins(self, monkeypatch: pytest.MonkeyPatch) -> None:
+        from meshtastic_mcp.uhubctl import resolve_target
+
+        # Env-var pinning should NOT require uhubctl to be running / installed.
+        monkeypatch.setenv("MESHTASTIC_UHUBCTL_LOCATION_NRF52", "9-9.9")
+        monkeypatch.setenv("MESHTASTIC_UHUBCTL_PORT_NRF52", "7")
+        assert resolve_target("nrf52") == ("9-9.9", 7)
+
+    def test_normalize_role_strips_alt_suffix(
+        self, monkeypatch: pytest.MonkeyPatch
+    ) -> None:
+        from meshtastic_mcp.uhubctl import resolve_target
+
+        # esp32s3_alt collapses to esp32s3 for env-var lookup.
+        monkeypatch.setenv("MESHTASTIC_UHUBCTL_LOCATION_ESP32S3", "2-2")
+        monkeypatch.setenv("MESHTASTIC_UHUBCTL_PORT_ESP32S3", "3")
+        assert resolve_target("esp32s3_alt") == ("2-2", 3)

mcp-server/tests/unit/test_ui_screen_log.py

@@ -0,0 +1,80 @@
+"""Pin the `Screen: frame N/M name=X reason=Y` regex + FrameEvent dataclass.
+
+The firmware-side format lives in `src/graphics/Screen.cpp::logFrameChange`;
+if the format string changes, this test — and the parser in
+`tests/ui/_screen_log.py` — have to be updated together.
+"""
+
+from __future__ import annotations
+
+from tests.ui._screen_log import FRAME_RE, FrameEvent, iter_frame_events
+
+
+class TestFrameEventParse:
+    def test_exact_firmware_output(self) -> None:
+        raw = "Screen: frame 2/8 name=home reason=next"
+        evt = FrameEvent.parse(raw)
+        assert evt is not None
+        assert evt.idx == 2
+        assert evt.count == 8
+        assert evt.name == "home"
+        assert evt.reason == "next"
+        assert evt.raw == raw
+
+    def test_with_log_prefix(self) -> None:
+        """Log lines may be preamble-wrapped by the firmware LOG_INFO macro
+        (timestamp, severity, etc.) — the regex uses .search() not .match()
+        so prefixes are fine."""
+        raw = "[INFO] 00:12:34  567   Screen: frame 4/12 name=nodelist_nodes reason=fn_f3    "
+        evt = FrameEvent.parse(raw)
+        assert evt is not None
+        assert evt.idx == 4
+        assert evt.count == 12
+        assert evt.name == "nodelist_nodes"
+        assert evt.reason == "fn_f3"
+
+    def test_rebuild_reason(self) -> None:
+        evt = FrameEvent.parse("Screen: frame 0/5 name=deviceFocused reason=rebuild")
+        assert evt is not None
+        assert evt.reason == "rebuild"
+
+    def test_all_fn_reasons(self) -> None:
+        for k in range(1, 6):
+            evt = FrameEvent.parse(
+                f"Screen: frame {k - 1}/8 name=settings reason=fn_f{k}"
+            )
+            assert evt is not None and evt.reason == f"fn_f{k}"
+
+    def test_unknown_name_is_preserved(self) -> None:
+        """If the reverse-map returns 'unknown', that still parses cleanly."""
+        evt = FrameEvent.parse("Screen: frame 99/100 name=unknown reason=prev")
+        assert evt is not None and evt.name == "unknown"
+
+    def test_non_matching_line_returns_none(self) -> None:
+        assert FrameEvent.parse("BOOT Booting firmware 2.7.23") is None
+        assert FrameEvent.parse("") is None
+        assert FrameEvent.parse("Screen: without the right format") is None
+
+
+class TestIterFrameEvents:
+    def test_filters_non_matching_lines(self) -> None:
+        lines = [
+            "Booting...",
+            "Screen: frame 1/5 name=home reason=rebuild",
+            "Some other log line",
+            "Screen: frame 2/5 name=textMessage reason=next",
+        ]
+        evts = list(iter_frame_events(lines))
+        assert len(evts) == 2
+        assert evts[0].reason == "rebuild"
+        assert evts[1].reason == "next"
+
+
+class TestRegexAnchoring:
+    def test_regex_is_compiled(self) -> None:
+        assert FRAME_RE.search("Screen: frame 0/0 name=home reason=next") is not None
+
+    def test_regex_allows_unusual_names(self) -> None:
+        r"""Name is `\S+`, so compound names with underscores/digits match."""
+        m = FRAME_RE.search("Screen: frame 5/10 name=nodelist_hopsignal reason=fn_f2")
+        assert m is not None and m["name"] == "nodelist_hopsignal"

meshtasticd.spec.rpkg

@@ -50,6 +50,7 @@ BuildRequires: pkgconfig(x11)
 BuildRequires: pkgconfig(libinput)
 BuildRequires: pkgconfig(xkbcommon-x11)
 BuildRequires: pkgconfig(sdl2)
+BuildRequires: pkgconfig(libnotify)
 
 # libbsd is needed on older Fedora/RHEL to provide 'strlcpy'
 %if 0%{?fedora} >= 39 || 0%{?rhel} >= 10
@@ -112,6 +113,10 @@ cp -r web/* %{buildroot}%{_datadir}/meshtasticd/web
 # Install default SSL storage directory (for web)
 mkdir -p %{buildroot}%{_sysconfdir}/meshtasticd/ssl
 
+# Install desktop icon
+mkdir -p %{buildroot}%{_datadir}/icons/hicolor/scalable/apps
+install -m 0644 bin/org.meshtastic.meshtasticd.svg %{buildroot}%{_datadir}/icons/hicolor/scalable/apps/org.meshtastic.meshtasticd.svg
+
 %pre
 # create spi group (for udev rules)
 getent group spi > /dev/null || groupadd -r spi
@@ -171,6 +176,7 @@ fi
 %dir %{_datadir}/meshtasticd/web
 %{_datadir}/meshtasticd/web/*
 %dir %{_sysconfdir}/meshtasticd/ssl
+%{_datadir}/icons/hicolor/scalable/apps/org.meshtastic.meshtasticd.svg
 
 %changelog
 %autochangelog

platformio.ini

@@ -124,7 +124,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/5305670b68eb5b92d14e62b5b536969ca4bb441f.zip
+	https://github.com/meshtastic/device-ui/archive/56e1da4e7d30abcd746a2092a30e422f8cf5fc2b.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]

src/detect/ScanI2C.h

@@ -31,6 +31,10 @@ class ScanI2C
         INA3221,
         MAX17048,
         MCP9808,
+        SHT31,
+        SHT4X,
+        SHTC3,
+        SHTXX,
         LPS22HB,
         QMC6310U,
         QMC6310N,
@@ -86,13 +90,13 @@ class ScanI2C
         DA217,
         CHSC6X,
         CST226SE,
+        CST3530,
         BMI270,
         SEN5X,
         SFA30,
         CW2015,
         SCD30,
         ADS1115,
-        SHTXX
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -629,7 +629,31 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(PCT2075_ADDR, PCT2075, "PCT2075", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(SCD30_ADDR, SCD30, "SCD30", (uint8_t)addr.address);
             case CST328_ADDR:
-                // Do we have the CST328 or the CST226SE
+                // Do we have the CST328 or the CST226SE,CST3530
+                {
+                    // T-Deck pro V1.1 new touch panel use CST3530
+                    int retry = 5;
+                    while (retry--) {
+                        uint8_t buffer[7];
+                        uint8_t r_cmd[] = {0x0d0, 0x03, 0x00, 0x00};
+                        i2cBus->beginTransmission(addr.address);
+                        i2cBus->write(r_cmd, sizeof(r_cmd));
+                        if (i2cBus->endTransmission() == 0) {
+                            i2cBus->requestFrom((int)addr.address, 7);
+                            i2cBus->readBytes(buffer, 7);
+                            if (buffer[2] == 0xCA && buffer[3] == 0xCA) {
+                                logFoundDevice("CST3530", (uint8_t)addr.address);
+                                type = CST3530;
+                                break;
+                            }
+                        }
+                        uint8_t cmd1[] = {0xD0, 0x00, 0x04, 0x00};
+                        i2cBus->beginTransmission(addr.address);
+                        i2cBus->write(cmd1, sizeof(cmd1));
+                        i2cBus->endTransmission();
+                        delay(50);
+                    }
+                }
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xAB), 1);
                 if (registerValue == 0xA9) {
                     type = CST226SE;

src/graphics/EInkDisplay2.cpp

@@ -104,8 +104,13 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
 // End the update process - virtual method, overridden in derived class
 void EInkDisplay::endUpdate()
 {
-    // Power off display hardware, then deep-sleep (Except Wireless Paper V1.1, no deep-sleep)
+#ifndef EINK_NOT_HIBERNATE
+    // By default, power off the E-Ink display hardware and enter hibernate().
+    // Boards/panels that define EINK_NOT_HIBERNATE intentionally skip this step.
+    // Skipping hibernate() can help avoid panel-specific wake/refresh or ghosting issues,
+    // but it typically trades lower power savings for that compatibility.
     adafruitDisplay->hibernate();
+#endif
 }
 
 // Write the buffer to the display memory

src/graphics/Screen.cpp

@@ -1357,6 +1357,10 @@ void Screen::setFrames(FrameFocus focus)
     // Store the info about this frameset, for future setFrames calls
     this->framesetInfo = fsi;
 
+#ifdef USERPREFS_UI_TEST_LOG
+    logFrameChange("rebuild", ui->getUiState()->currentFrame);
+#endif
+
     setFastFramerate(); // Draw ASAP
 }
 
@@ -1511,11 +1515,77 @@ void Screen::handleOnPress()
     }
 }
 
+#ifdef USERPREFS_UI_TEST_LOG
+void Screen::logFrameChange(const char *reason, uint8_t targetIdx)
+{
+    // Reverse-map an index to a stable name string keyed off FramePositions
+    // field names — so the pytest harness can assert `name=nodelist_nodes`
+    // without caring about how the positions were ordered this boot.
+    const auto &p = framesetInfo.positions;
+    const char *name = "unknown";
+    if (targetIdx == p.home)
+        name = "home";
+    else if (targetIdx == p.deviceFocused)
+        name = "deviceFocused";
+    else if (targetIdx == p.textMessage)
+        name = "textMessage";
+    else if (targetIdx == p.nodelist_nodes)
+        name = "nodelist_nodes";
+    else if (targetIdx == p.nodelist_location)
+        name = "nodelist_location";
+    else if (targetIdx == p.nodelist_lastheard)
+        name = "nodelist_lastheard";
+    else if (targetIdx == p.nodelist_hopsignal)
+        name = "nodelist_hopsignal";
+    else if (targetIdx == p.nodelist_distance)
+        name = "nodelist_distance";
+    else if (targetIdx == p.nodelist_bearings)
+        name = "nodelist_bearings";
+    else if (targetIdx == p.system)
+        name = "system";
+    else if (targetIdx == p.gps)
+        name = "gps";
+    else if (targetIdx == p.lora)
+        name = "lora";
+    else if (targetIdx == p.clock)
+        name = "clock";
+    else if (targetIdx == p.chirpy)
+        name = "chirpy";
+    else if (targetIdx == p.fault)
+        name = "fault";
+    else if (targetIdx == p.waypoint)
+        name = "waypoint";
+    else if (targetIdx == p.focusedModule)
+        name = "focusedModule";
+    else if (targetIdx == p.log)
+        name = "log";
+    else if (targetIdx == p.settings)
+        name = "settings";
+    else if (targetIdx == p.wifi)
+        name = "wifi";
+    else if (p.firstFavorite != 255 && p.lastFavorite != 255 && targetIdx >= p.firstFavorite && targetIdx <= p.lastFavorite)
+        name = "favorite";
+    LOG_INFO("Screen: frame %u/%u name=%s reason=%s", (unsigned)targetIdx, (unsigned)framesetInfo.frameCount, name, reason);
+}
+#endif
+
 void Screen::showFrame(FrameDirection direction)
 {
     // Only advance frames when UI is stable
     if (ui->getUiState()->frameState == FIXED) {
 
+#ifdef USERPREFS_UI_TEST_LOG
+        // Log the *intended* target before the (async) transition fires, so
+        // tests see a deterministic record of what was requested.
+        if (framesetInfo.frameCount > 0) {
+            uint8_t curr = ui->getUiState()->currentFrame;
+            uint8_t target = (direction == FrameDirection::NEXT)
+                                 ? (uint8_t)((curr + 1) % framesetInfo.frameCount)
+                                 : (uint8_t)((curr + framesetInfo.frameCount - 1) % framesetInfo.frameCount);
+            logFrameChange(direction == FrameDirection::NEXT ? "next" : "prev", target);
+        }
+#endif
+
         if (direction == FrameDirection::NEXT) {
             ui->nextFrame();
         } else {
@@ -1847,22 +1917,37 @@ int Screen::handleInputEvent(const InputEvent *event)
                 showFrame(FrameDirection::NEXT);
             } else if (event->inputEvent == INPUT_BROKER_FN_F1) {
                 this->ui->switchToFrame(0);
+#ifdef USERPREFS_UI_TEST_LOG
+                logFrameChange("fn_f1", 0);
+#endif
                 lastScreenTransition = millis();
                 setFastFramerate();
             } else if (event->inputEvent == INPUT_BROKER_FN_F2) {
                 this->ui->switchToFrame(1);
+#ifdef USERPREFS_UI_TEST_LOG
+                logFrameChange("fn_f2", 1);
+#endif
                 lastScreenTransition = millis();
                 setFastFramerate();
             } else if (event->inputEvent == INPUT_BROKER_FN_F3) {
                 this->ui->switchToFrame(2);
+#ifdef USERPREFS_UI_TEST_LOG
+                logFrameChange("fn_f3", 2);
+#endif
                 lastScreenTransition = millis();
                 setFastFramerate();
             } else if (event->inputEvent == INPUT_BROKER_FN_F4) {
                 this->ui->switchToFrame(3);
+#ifdef USERPREFS_UI_TEST_LOG
+                logFrameChange("fn_f4", 3);
+#endif
                 lastScreenTransition = millis();
                 setFastFramerate();
             } else if (event->inputEvent == INPUT_BROKER_FN_F5) {
                 this->ui->switchToFrame(4);
+#ifdef USERPREFS_UI_TEST_LOG
+                logFrameChange("fn_f5", 4);
+#endif
                 lastScreenTransition = millis();
                 setFastFramerate();
             } else if (event->inputEvent == INPUT_BROKER_UP_LONG) {

src/graphics/Screen.h

@@ -669,6 +669,16 @@ class Screen : public concurrency::OSThread
     void handleOnPress();
     void handleStartFirmwareUpdateScreen();
 
+#ifdef USERPREFS_UI_TEST_LOG
+    // Test-only: emits one LOG_INFO line on every frame transition so the
+    // pytest harness can assert which frame is shown. Gated behind a macro
+    // so the chatty log doesn't ship in release builds. Enabled via
+    // build_testing_profile(enable_ui_log=True) in mcp-server/userprefs.py.
+    // Member function (not free) because FramesetInfo is a private nested
+    // type — only methods of Screen can reach it.
+    void logFrameChange(const char *reason, uint8_t targetIdx);
+#endif
+
     // Info collected by setFrames method.
     // Index location of specific frames.
     // - Used to apply the FrameFocus parameter of setFrames

src/main.cpp

@@ -340,9 +340,138 @@ void setup()
 
 #ifdef BLE_LED
     pinMode(BLE_LED, OUTPUT);
+#ifdef BLE_LED_INVERTED
+    digitalWrite(BLE_LED, HIGH);
+#else
+    digitalWrite(BLE_LED, LOW);
+#endif
+#endif
+
+#if defined(T_DECK)
+    // GPIO10 manages all peripheral power supplies
+    // Turn on peripheral power immediately after MUC starts.
+    // If some boards are turned on late, ESP32 will reset due to low voltage.
+    // ESP32-C3(Keyboard) , MAX98357A(Audio Power Amplifier) ,
+    // TF Card , Display backlight(AW9364DNR) , AN48841B(Trackball) , ES7210(Decoder)
+    pinMode(KB_POWERON, OUTPUT);
+    digitalWrite(KB_POWERON, HIGH);
+    // T-Deck has all three SPI peripherals (TFT, SD, LoRa) attached to the same SPI bus
+    // We need to initialize all CS pins in advance otherwise there will be SPI communication issues
+    // e.g. when detecting the SD card
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(TFT_CS, OUTPUT);
+    digitalWrite(TFT_CS, HIGH);
+    delay(100);
+#elif defined(T_DECK_PRO)
+    pinMode(LORA_EN, OUTPUT);
+    digitalWrite(LORA_EN, HIGH);
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(PIN_EINK_CS, OUTPUT);
+    digitalWrite(PIN_EINK_CS, HIGH);
+#if PIN_EINK_RES >= 0
+    pinMode(PIN_EINK_RES, OUTPUT);
+    digitalWrite(PIN_EINK_RES, HIGH);
+#endif
+    pinMode(CST328_PIN_RST, OUTPUT);
+    digitalWrite(CST328_PIN_RST, HIGH);
+#elif defined(T_LORA_PAGER)
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(TFT_CS, OUTPUT);
+    digitalWrite(TFT_CS, HIGH);
+    pinMode(KB_INT, INPUT_PULLUP);
+    // io expander
+    io.begin(Wire, XL9555_SLAVE_ADDRESS0, SDA, SCL);
+    io.pinMode(EXPANDS_DRV_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_DRV_EN, HIGH);
+    io.pinMode(EXPANDS_AMP_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_AMP_EN, LOW);
+    io.pinMode(EXPANDS_LORA_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_LORA_EN, HIGH);
+    io.pinMode(EXPANDS_GPS_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_GPS_EN, HIGH);
+    io.pinMode(EXPANDS_KB_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_KB_EN, HIGH);
+    io.pinMode(EXPANDS_SD_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_SD_EN, HIGH);
+    io.pinMode(EXPANDS_GPIO_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
+    io.pinMode(EXPANDS_SD_PULLEN, INPUT);
+#elif defined(HACKADAY_COMMUNICATOR)
+    pinMode(KB_INT, INPUT);
     digitalWrite(BLE_LED, LED_STATE_OFF);
 #endif
 
+#if defined(T_DECK)
+    // GPIO10 manages all peripheral power supplies
+    // Turn on peripheral power immediately after MUC starts.
+    // If some boards are turned on late, ESP32 will reset due to low voltage.
+    // ESP32-C3(Keyboard) , MAX98357A(Audio Power Amplifier) ,
+    // TF Card , Display backlight(AW9364DNR) , AN48841B(Trackball) , ES7210(Decoder)
+    pinMode(KB_POWERON, OUTPUT);
+    digitalWrite(KB_POWERON, HIGH);
+    // T-Deck has all three SPI peripherals (TFT, SD, LoRa) attached to the same SPI bus
+    // We need to initialize all CS pins in advance otherwise there will be SPI communication issues
+    // e.g. when detecting the SD card
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(TFT_CS, OUTPUT);
+    digitalWrite(TFT_CS, HIGH);
+    delay(100);
+#elif defined(T_DECK_PRO)
+    pinMode(LORA_EN, OUTPUT);
+    digitalWrite(LORA_EN, HIGH);
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(PIN_EINK_CS, OUTPUT);
+    digitalWrite(PIN_EINK_CS, HIGH);
+#if PIN_EINK_RES >= 0
+    pinMode(PIN_EINK_RES, OUTPUT);
+    digitalWrite(PIN_EINK_RES, HIGH);
+#endif
+    pinMode(CST328_PIN_RST, OUTPUT);
+    digitalWrite(CST328_PIN_RST, HIGH);
+#elif defined(T_LORA_PAGER)
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(TFT_CS, OUTPUT);
+    digitalWrite(TFT_CS, HIGH);
+    pinMode(KB_INT, INPUT_PULLUP);
+    // io expander
+    io.begin(Wire, XL9555_SLAVE_ADDRESS0, SDA, SCL);
+    io.pinMode(EXPANDS_DRV_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_DRV_EN, HIGH);
+    io.pinMode(EXPANDS_AMP_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_AMP_EN, LOW);
+    io.pinMode(EXPANDS_LORA_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_LORA_EN, HIGH);
+    io.pinMode(EXPANDS_GPS_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_GPS_EN, HIGH);
+    io.pinMode(EXPANDS_KB_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_KB_EN, HIGH);
+    io.pinMode(EXPANDS_SD_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_SD_EN, HIGH);
+    io.pinMode(EXPANDS_GPIO_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
+    io.pinMode(EXPANDS_SD_PULLEN, INPUT);
+#elif defined(HACKADAY_COMMUNICATOR)
+    pinMode(KB_INT, INPUT);
+#endif
+
     concurrency::hasBeenSetup = true;
 #if HAS_SCREEN
     meshtastic_Config_DisplayConfig_OledType screen_model =

src/mesh/NodeDB.cpp

@@ -863,6 +863,10 @@ void NodeDB::installDefaultModuleConfig()
     moduleConfig.external_notification.nag_timeout = default_ringtone_nag_secs;
 #endif
 #endif
+#if ARCH_PORTDUINO
+    moduleConfig.external_notification.enabled = true;
+    moduleConfig.external_notification.alert_message = true;
+#endif
 #ifdef NANO_G2_ULTRA
     moduleConfig.external_notification.enabled = true;
     moduleConfig.external_notification.alert_message = true;

src/modules/AdminModule.cpp

@@ -1519,8 +1519,15 @@ void AdminModule::handleSendInputEvent(const meshtastic_AdminMessage_InputEvent
     LOG_DEBUG("Processing input event: event_code=%u, kb_char=%u, touch_x=%u, touch_y=%u", inputEvent.event_code,
               inputEvent.kb_char, inputEvent.touch_x, inputEvent.touch_y);
 
-    // Create InputEvent for injection
-    InputEvent event = {.inputEvent = (input_broker_event)inputEvent.event_code,
+    // Create InputEvent for injection.
+    //
+    // `.source` MUST be a non-null C string: the LOG_INFO below formats it
+    // with %s, and passing NULL to the esp-log formatter crashes with
+    // Guru Meditation LoadProhibited at strlen(NULL). Other InputBroker
+    // sources (buttons, rotary) always set this; the admin path was the
+    // only one leaving it default-null.
+    InputEvent event = {.source = "admin",
+                        .inputEvent = (input_broker_event)inputEvent.event_code,
                         .kbchar = (unsigned char)inputEvent.kb_char,
                         .touchX = inputEvent.touch_x,
                         .touchY = inputEvent.touch_y};

src/modules/ExternalNotificationModule.cpp

@@ -24,6 +24,10 @@
 #include "mesh/generated/meshtastic/rtttl.pb.h"
 #include <Arduino.h>
 
+#if HAS_LIBNOTIFY
+#include <libnotify/notify.h>
+#endif
+
 #if defined(HAS_RGB_LED)
 #include "AmbientLightingThread.h"
 uint8_t red = 0;
@@ -408,6 +412,9 @@ ProcessMessage ExternalNotificationModule::handleReceived(const meshtastic_MeshP
             if (genericShouldAlert) {
                 LOG_INFO("externalNotificationModule - Generic alert");
                 setExternalState(0, true);
+#if HAS_LIBNOTIFY
+                portduinoNotify(mp);
+#endif
             }
 
             if (vibraShouldAlert) {
@@ -521,3 +528,40 @@ int ExternalNotificationModule::handleInputEvent(const InputEvent *event)
     }
     return 0;
 }
+
+#if HAS_LIBNOTIFY
+void ExternalNotificationModule::portduinoNotify(const meshtastic_MeshPacket &mp)
+{
+    std::string senderName;
+    const meshtastic_NodeInfoLite *sender = nodeDB->getMeshNode(mp.from);
+    if (sender && sender->has_user) {
+        if (sender->user.long_name[0] != '\0') {
+            senderName = sender->user.long_name;
+        } else {
+            senderName = sender->user.short_name;
+        }
+    } else {
+        senderName = std::to_string(mp.from);
+    }
+    std::string notificationSummary = "From: " + senderName;
+    std::string notificationBody = std::string((char *)mp.decoded.payload.bytes, mp.decoded.payload.size);
+
+    if (!notify_is_initted()) {
+        if (!notify_init("Meshtasticd")) {
+            LOG_WARN("Failed to initialize libnotify");
+            return;
+        }
+    }
+    NotifyNotification *notification =
+        notify_notification_new(notificationSummary.c_str(), notificationBody.c_str(), "org.meshtastic.meshtasticd");
+    if (notification) {
+        GError *error = nullptr;
+        if (!notify_notification_show(notification, &error)) {
+            LOG_WARN("Failed to show notification: %s", error ? error->message : "unknown error");
+            if (error)
+                g_error_free(error);
+        }
+        g_object_unref(G_OBJECT(notification));
+    }
+}
+#endif

src/modules/ExternalNotificationModule.h

@@ -77,6 +77,10 @@ class ExternalNotificationModule : public SinglePortModule, private concurrency:
     virtual AdminMessageHandleResult handleAdminMessageForModule(const meshtastic_MeshPacket &mp,
                                                                  meshtastic_AdminMessage *request,
                                                                  meshtastic_AdminMessage *response) override;
+
+#if HAS_LIBNOTIFY
+    void portduinoNotify(const meshtastic_MeshPacket &mp);
+#endif
 };
 
 extern ExternalNotificationModule *externalNotificationModule;

src/platform/extra_variants/t_deck_pro/variant.cpp

@@ -8,20 +8,127 @@
 
 CSE_CST328 tsPanel = CSE_CST328(EINK_WIDTH, EINK_HEIGHT, &Wire, CST328_PIN_RST, CST328_PIN_INT);
 
+static bool is_cst3530 = false;
+volatile bool touch_isr = false;
+#define CST3530_ADDR 0x1A
+
+bool read_cst3530_touch(int16_t *x, int16_t *y)
+{
+    uint8_t buffer[9] = {0};
+    uint8_t r_cmd[] = {0xD0, 0x07, 0x00, 0x00};
+    uint8_t clear_cmd[] = {0xD0, 0x00, 0x02, 0xAB};
+
+    Wire.beginTransmission(CST3530_ADDR);
+    Wire.write(r_cmd, sizeof(r_cmd));
+    if (Wire.endTransmission() != 0) {
+        LOG_DEBUG("CST3530 I2C send addr failed");
+        return false;
+    }
+
+    int read_len = Wire.requestFrom((int)CST3530_ADDR, sizeof(buffer));
+    if (read_len != sizeof(buffer)) {
+        LOG_DEBUG("CST3530 read len error: %d (expect 9)", read_len);
+        return false;
+    }
+    int actual_read = Wire.readBytes(buffer, sizeof(buffer));
+    if (actual_read != sizeof(buffer)) {
+        LOG_DEBUG("CST3530 read bytes error: %d (expect 9)", actual_read);
+        return false;
+    }
+
+    uint8_t report_typ = buffer[2];
+    if (report_typ != 0xFF) {
+        return false;
+    }
+
+    uint8_t touch_points = buffer[3] & 0x0F;
+    if (touch_points == 0 || touch_points > 1) {
+        LOG_DEBUG("CST3530 touch points invalid: %d", touch_points);
+        return false;
+    }
+
+    *x = buffer[4] + ((uint16_t)(buffer[7] & 0x0F) << 8);
+    *y = buffer[5] + ((uint16_t)(buffer[7] & 0xF0) << 4);
+
+    // LOG_DEBUG("CST3530 touch: num:%d x=%d,y=%d", touch_points, *x, *y);
+
+    Wire.beginTransmission(CST3530_ADDR);
+    Wire.write(clear_cmd, sizeof(clear_cmd));
+    if (Wire.endTransmission() != 0) {
+        LOG_DEBUG("CST3530 clear cmd failed");
+    }
+
+    return true;
+}
+
 bool readTouch(int16_t *x, int16_t *y)
 {
-    if (tsPanel.getTouches()) {
-        *x = tsPanel.getPoint(0).x;
-        *y = tsPanel.getPoint(0).y;
-        return true;
+
+    if (is_cst3530) {
+        if (touch_isr) {
+            touch_isr = false;
+            return read_cst3530_touch(x, y);
+        }
+        return false;
+    } else {
+        if (tsPanel.getTouches()) {
+            *x = tsPanel.getPoint(0).x;
+            *y = tsPanel.getPoint(0).y;
+            return true;
+        }
     }
     return false;
 }
 
+static void IRAM_ATTR touchInterruptHandler()
+{
+    touch_isr = true;
+}
+
 // T-Deck Pro specific init
 void lateInitVariant()
 {
-    tsPanel.begin();
+    // Reset touch
+    pinMode(CST328_PIN_RST, OUTPUT);
+    digitalWrite(CST328_PIN_RST, HIGH);
+    delay(20);
+    digitalWrite(CST328_PIN_RST, LOW);
+    delay(80);
+    digitalWrite(CST328_PIN_RST, HIGH);
+    delay(20);
+
+    int retry = 5;
+    uint8_t buffer[7];
+    uint8_t r_cmd[] = {0x0d0, 0x03, 0x00, 0x00};
+
+    // Probe touch chip
+    while (retry--) {
+        Wire.beginTransmission(CST3530_ADDR);
+        Wire.write(r_cmd, sizeof(r_cmd));
+        if (Wire.endTransmission() == 0) {
+            Wire.requestFrom((int)CST3530_ADDR, 7);
+            Wire.readBytes(buffer, 7);
+            if (buffer[2] == 0xCA && buffer[3] == 0xCA) {
+                LOG_DEBUG("CST3530 detected");
+                is_cst3530 = true;
+
+                // The CST3530 will automatically enter sleep mode;
+                // polling should not be used, but rather an interrupt method should be employed.
+                pinMode(CST328_PIN_INT, INPUT);
+                attachInterrupt(digitalPinToInterrupt(CST328_PIN_INT), touchInterruptHandler, FALLING);
+
+                break;
+            } else {
+                LOG_DEBUG("CST3530 not response ~!");
+            }
+        }
+        uint8_t cmd1[] = {0xD0, 0x00, 0x04, 0x00};
+        Wire.beginTransmission(CST3530_ADDR);
+        Wire.write(cmd1, sizeof(cmd1));
+        Wire.endTransmission();
+        delay(50);
+    }
+
     touchScreenImpl1 = new TouchScreenImpl1(EINK_WIDTH, EINK_HEIGHT, readTouch);
     touchScreenImpl1->init();
 }

test/README.md

@@ -0,0 +1,322 @@
+# Native Unit Tests — Authoring Guide
+
+This directory contains C++ unit tests that run on the host machine via PlatformIO's native environment. Tests use the [Unity](http://www.throwtheswitch.org/unity) framework.
+
+## Running Tests
+
+```bash
+# All test suites
+pio test -e native
+
+# Single suite
+pio test -e native -f test_your_module
+
+# Verbose (shows build errors in detail)
+pio test -e native -f test_your_module -vvv
+```
+
+### Helper Scripts (Useful Shortcuts)
+
+These wrappers are handy when local host dependencies are missing or when you want repeatable commands.
+
+```bash
+# Run native tests in Docker (recommended on macOS / non-Linux hosts)
+./bin/test-native-docker.sh
+
+# Pass normal PlatformIO test args through to Dockerized test run
+./bin/test-native-docker.sh -f test_your_module
+
+# Force Docker image rebuild (after dependency changes)
+./bin/test-native-docker.sh --rebuild
+
+# Run simulator integration check (build native first)
+pio run -e native && ./bin/test-simulator.sh
+
+# Build and run meshtasticd natively
+./bin/native-run.sh
+
+# Build and run under gdbserver on localhost:2345
+./bin/native-gdbserver.sh
+
+# Build native release artifact into ./release/
+./bin/build-native.sh native
+```
+
+Notes:
+
+- The repository script name is `./bin/test-simulator.sh` (there is no `test-native-simulator.sh`).
+- `./bin/test-native-docker.sh` is the closest match to CI behavior for native tests and avoids host package setup.
+
+### System Dependencies (Ubuntu/Debian)
+
+The native build requires several system libraries. Install them all at once:
+
+```bash
+sudo apt-get install -y \
+  libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev \
+  libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev libuv1-dev
+```
+
+See `.github/actions/setup-native/action.yml` for the canonical list.
+
+## Creating a New Test Suite
+
+### 1. Directory Structure
+
+```text
+test/test_your_module/test_main.cpp
+```
+
+One file per suite. No per-test `platformio.ini` is needed — tests build under the `[env:native]` environment defined in the root `platformio.ini`.
+
+### 2. File Skeleton
+
+```cpp
+#include "MeshTypes.h"      // Include BEFORE TestUtil.h (provides NodeNum, etc.)
+#include "TestUtil.h"        // initializeTestEnvironment(), testDelay()
+#include <unity.h>
+
+#if YOUR_FEATURE_GUARD       // Same #if guard as the module under test
+
+#include "FSCommon.h"
+#include "gps/RTC.h"
+#include "mesh/NodeDB.h"
+#include "modules/YourModule.h"
+#include <cstdio>
+#include <cstring>
+#include <memory>
+
+// --- Test output helpers ---
+// Unity swallows printf/stdout. Only TEST_MESSAGE() output appears in results.
+#define MSG_BUF_LEN 200
+#define TEST_MSG_FMT(fmt, ...) do { \
+    char _buf[MSG_BUF_LEN]; \
+    snprintf(_buf, sizeof(_buf), fmt, __VA_ARGS__); \
+    TEST_MESSAGE(_buf); \
+} while(0)
+
+// --- Tests ---
+
+void test_example()
+{
+    TEST_MESSAGE("=== Example test ===");
+    TEST_ASSERT_TRUE(true);
+}
+
+// --- Unity lifecycle ---
+
+void setUp(void) { /* runs before every test */ }
+void tearDown(void) { /* runs after every test */ }
+
+void setup()
+{
+    initializeTestEnvironment();   // MUST call — sets up RTC, OSThread, console
+    UNITY_BEGIN();
+    RUN_TEST(test_example);
+    exit(UNITY_END());             // exit() required — Unity runner expects it
+}
+
+void loop() {}
+
+#else // !YOUR_FEATURE_GUARD
+
+void setUp(void) {}
+void tearDown(void) {}
+
+void setup()
+{
+    initializeTestEnvironment();
+    UNITY_BEGIN();
+    exit(UNITY_END());
+}
+
+void loop() {}
+
+#endif
+```
+
+### 3. Feature Guard
+
+Wrap the entire test body in the same `#if` guard the module uses (e.g. `#if HAS_VARIABLE_HOPS`, `#if !MESHTASTIC_EXCLUDE_GPS`). When the feature is disabled, the `#else` branch produces an empty passing suite.
+
+## Common Patterns
+
+### MockNodeDB
+
+Most module tests need to inject nodes with controlled hop distances and ages:
+
+```cpp
+class MockNodeDB : public NodeDB
+{
+  public:
+    void clearTestNodes()
+    {
+        testNodes.clear();
+        numMeshNodes = 0;
+    }
+
+    void addTestNode(NodeNum num, uint8_t hopsAway, bool hasHops,
+                     uint32_t ageSecs, bool viaMqtt = false)
+    {
+        meshtastic_NodeInfoLite node = meshtastic_NodeInfoLite_init_zero;
+        node.num = num;
+        node.has_hops_away = hasHops;
+        node.hops_away = hopsAway;
+        node.via_mqtt = viaMqtt;
+        node.last_heard = getTime() - ageSecs;
+        testNodes.push_back(node);
+        meshNodes = &testNodes;
+        numMeshNodes = testNodes.size();
+    }
+
+    std::vector<meshtastic_NodeInfoLite> testNodes;
+};
+
+static MockNodeDB *mockNodeDB = nullptr;
+```
+
+Set `nodeDB = mockNodeDB;` in `setUp()`.
+
+### Test Shim (Exposing Protected/Private Members)
+
+Subclass the module under test to make protected methods callable and private members writable:
+
+```cpp
+class YourModuleTestShim : public YourModule
+{
+  public:
+    // Expose protected methods
+    using YourModule::runOnce;
+    using YourModule::someProtectedMethod;
+
+    // Access private members via friend (see below)
+    void setPrivateField(int x) { privateField = x; }
+};
+```
+
+In the module header, grant friend access under the `UNIT_TEST` define (set automatically by PlatformIO's test framework):
+
+```cpp
+// In YourModule.h, inside the class body:
+#ifdef UNIT_TEST
+    friend class YourModuleTestShim;
+#endif
+```
+
+### Global Singleton Lifecycle
+
+Most modules use a global pointer (`extern YourModule *yourModule;`). Manage it carefully:
+
+```cpp
+void setUp(void) {
+    // ... setup ...
+}
+
+void tearDown(void) {
+    yourModule = nullptr;   // prevent dangling pointer between tests
+}
+
+void test_something() {
+    auto shim = std::unique_ptr<YourModuleTestShim>(new YourModuleTestShim());
+    yourModule = shim.get();
+    // ... test ...
+    yourModule = nullptr;
+}
+```
+
+## Pitfalls and How to Avoid Them
+
+### 1. Persisted Filesystem State Leaks Between Tests
+
+Modules that save state to `/prefs/*.bin` will have that state loaded by the next test's constructor via `loadState()`. This causes values from one test (e.g. rolling averages from a megamesh scenario) to bleed into unrelated tests.
+
+**Fix:** Delete state files at the start of `setUp()`:
+
+```cpp
+void setUp(void) {
+    // ...
+#ifdef FSCom
+    FSCom.remove("/prefs/your_module.bin");
+#endif
+}
+```
+
+### 2. File-Scope Mutable Globals Persist Across Tests
+
+Variables like `static uint8_t someDenominator = 8;` in the module `.cpp` file retain mutations from previous tests. This is distinct from member variables — it affects all instances.
+
+**Fix:** Add a `static void resetGlobal()` method to the module and call it in `setUp()`.
+
+### 3. Randomness Breaks Determinism
+
+If the module uses `rand()` for jitter or similar, test results become non-reproducible.
+
+**Fix:** Add a static enable/disable flag:
+
+```cpp
+// Module header:
+static void setJitter(bool enabled) { s_jitterEnabled = enabled; }
+
+// Test setUp:
+YourModule::setJitter(false);
+
+// Test tearDown:
+YourModule::setJitter(true);
+```
+
+### 4. Time-Dependent Logic Produces Zeros
+
+Rolling averages weighted by `elapsedMs / ONE_HOUR_MS` collapse to zero when tests complete in microseconds. Sample windows, EMA alphas, and interval-based accumulators all suffer from this.
+
+**Fix:** Expose the timestamp via friend access and simulate realistic elapsed time:
+
+```cpp
+// In test shim:
+void setWindowStartMs(uint32_t ms) { windowStartMs = ms; }
+
+// In test:
+shim.setWindowStartMs(millis() - 3600000UL);  // pretend 1 hour elapsed
+```
+
+### 5. Capacity Limits Cause Cascading Failures
+
+Fixed-size data structures (hash sets, ring buffers) overflow when tests inject more data than fits. This triggers early flushes with near-zero time fractions, compounding the time-dependent-zeros problem.
+
+**Fix:** Simulate multiple realistic time windows rather than one massive burst. Let adaptive mechanisms (if any) self-tune over several rolls.
+
+## setUp/tearDown Checklist
+
+- [ ] Create and clear MockNodeDB (if needed)
+- [ ] Zero global configs: `config`, `moduleConfig`, `myNodeInfo`
+- [ ] Set `nodeDB = mockNodeDB`
+- [ ] Delete persisted state files (`FSCom.remove(...)`)
+- [ ] Reset file-scope mutable globals
+- [ ] Disable randomness/jitter flags
+- [ ] In `tearDown`: null the global singleton pointer, restore flags
+
+## Test Organization
+
+A well-structured test suite follows this pattern:
+
+1. **Topology/scenario builders** — static helper functions that set up specific test conditions
+2. **Injection helpers** — simulate realistic traffic, time, or event patterns
+3. **Scenario tests** — each builds a scenario, runs the module, asserts on outcomes
+4. **Lifecycle tests** — state persistence, startup from blank, restart recovery
+5. **Summary test** (optional) — emits a scenario table into the log for quick CI review
+
+## Existing Test Suites
+
+| Suite                        | Module Under Test             |
+| ---------------------------- | ----------------------------- |
+| `test_crypto`                | CryptoEngine                  |
+| `test_mqtt`                  | MQTT integration              |
+| `test_radio`                 | Radio interface               |
+| `test_mesh_module`           | Module framework              |
+| `test_meshpacket_serializer` | Packet serialization          |
+| `test_transmit_history`      | Retransmission tracking       |
+| `test_atak`                  | ATAK integration              |
+| `test_default`               | Default configuration helpers |
+| `test_http_content_handler`  | HTTP handling                 |
+| `test_serial`                | Serial communication          |
+| `test_hop_scaling`           | Hop scaling algorithm         |
+| `test_traffic_management`    | Traffic management            |

userPrefs.jsonc

@@ -57,6 +57,7 @@
   // "USERPREFS_MQTT_ROOT_TOPIC": "event/REPLACEME",
   // "USERPREFS_RINGTONE_NAG_SECS": "60",
   // "USERPREFS_NODEINFO_REPLY_SUPPRESS_SECS": "43200",
+  // "USERPREFS_UI_TEST_LOG": "true", // Test-only: emits `Screen: frame N/M name=... reason=...` log per UI transition (for the mcp-server ui test tier); off in release builds.
   "USERPREFS_RINGTONE_RTTTL": "24:d=32,o=5,b=565:f6,p,f6,4p,p,f6,p,f6,2p,p,b6,p,b6,p,b6,p,b6,p,b,p,b,p,b,p,b,p,b,p,b,p,b,p,b,1p.,2p.,p",
   // "USERPREFS_NETWORK_IPV6_ENABLED": "1",
   "USERPREFS_TZ_STRING": "tzplaceholder                                         "

variants/esp32s3/t-deck-pro-v1_1/pins_arduino.h

@@ -0,0 +1,19 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// used for keyboard, touch controller, beam sensor, and gyroscope
+static const uint8_t SDA = 13;
+static const uint8_t SCL = 14;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = 3;
+static const uint8_t MOSI = 33;
+static const uint8_t MISO = 47;
+static const uint8_t SCK = 36;
+
+#endif /* Pins_Arduino_h */

variants/esp32s3/t-deck-pro-v1_1/platformio.ini

@@ -0,0 +1,41 @@
+[env:t-deck-pro-v1_1]
+custom_meshtastic_hw_model = 102
+custom_meshtastic_hw_model_slug = T_DECK_PRO
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = LILYGO T-Deck Pro
+custom_meshtastic_images = tdeck_pro.svg
+custom_meshtastic_tags = LilyGo
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
+extends = esp32s3_base
+board = t-deck-pro
+board_check = true
+upload_protocol = esptool
+
+build_flags = 
+  ${esp32s3_base.build_flags} -I variants/esp32s3/t-deck-pro-v1_1
+  -D T_DECK_PRO
+  -D USE_EINK
+  -D EINK_DISPLAY_MODEL=GxEPD2_310_GDEQ031T10
+  -D EINK_WIDTH=240
+  -D EINK_HEIGHT=320
+  ;-D USE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
+  -D EINK_LIMIT_FASTREFRESH=10           ; How many consecutive fast-refreshes are permitted
+  -D EINK_LIMIT_GHOSTING_PX=2000        ; (Optional) How much image ghosting is tolerated
+  -D EINK_NOT_HIBERNATE                 ; Disable hibernate to avoid issues with elink
+
+lib_deps =
+  ${esp32s3_base.lib_deps}
+  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
+  zinggjm/GxEPD2@1.6.8
+  # renovate: datasource=git-refs depName=CSE_Touch packageName=https://github.com/CIRCUITSTATE/CSE_Touch gitBranch=main
+  https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
+  # renovate: datasource=github-tags depName=CSE_CST328 packageName=CIRCUITSTATE/CSE_CST328
+  https://github.com/CIRCUITSTATE/CSE_CST328/archive/refs/tags/v0.0.4.zip
+  # renovate: datasource=git-refs depName=BQ27220 packageName=https://github.com/mverch67/BQ27220 gitBranch=main
+  https://github.com/mverch67/BQ27220/archive/07d92be846abd8a0258a50c23198dac0858b22ed.zip
+  # renovate: datasource=custom.pio depName=Adafruit DRV2605 packageName=adafruit/library/Adafruit DRV2605 Library
+  adafruit/Adafruit DRV2605 Library@1.2.4

variants/esp32s3/t-deck-pro-v1_1/variant.h

@@ -0,0 +1,106 @@
+// Display (E-Ink)
+#define PIN_EINK_CS 34
+#define PIN_EINK_BUSY 37
+#define PIN_EINK_DC 35
+#define PIN_EINK_RES 16
+#define PIN_EINK_SCLK 36
+#define PIN_EINK_MOSI 47
+#define TFT_BL 45 // option , default not backlight
+
+#define I2C_SDA SDA
+#define I2C_SCL SCL
+
+// CST328 touch screen (implementation in src/platform/extra_variants/t_deck_pro/variant.cpp)
+#define HAS_TOUCHSCREEN 1
+#define CST328_PIN_INT 12
+#define CST328_PIN_RST 38
+
+#define USE_POWERSAVE
+#define SLEEP_TIME 120
+
+// GNSS
+#define HAS_GPS 1
+#define GPS_BAUDRATE 38400
+#define PIN_GPS_EN 39
+#define GPS_EN_ACTIVE 1
+#define GPS_RX_PIN 44
+#define GPS_TX_PIN 43
+#define PIN_GPS_PPS 1
+
+#define BUTTON_PIN 0
+
+// vibration motor
+#define HAS_DRV2605
+#define PIN_DRV_EN 2
+
+// Have SPI interface SD card slot
+#define HAS_SDCARD
+#define SDCARD_USE_SPI1
+#define SPI_MOSI (33)
+#define SPI_SCK (36)
+#define SPI_MISO (47)
+#define SPI_CS (48)
+#define SDCARD_CS SPI_CS
+#define SD_SPI_FREQUENCY 75000000U
+
+// TCA8418 keyboard
+#define KB_BL_PIN 42
+#define CANNED_MESSAGE_MODULE_ENABLE 1
+
+// microphone PCM5102A
+#define PCM5102A_SCK 47
+#define PCM5102A_DIN 17
+#define PCM5102A_LRCK 18
+
+// LTR_553ALS light sensor
+#define HAS_LTR553ALS
+
+// gyroscope BHI260AP
+// #define BOARD_1V8_EN 38 //Deck-Pro remove 1.8v en pin
+#define HAS_BHI260AP
+
+// battery charger BQ25896
+#define HAS_PPM 1
+#define XPOWERS_CHIP_BQ25896
+
+// battery quality management BQ27220
+#define HAS_BQ27220 1
+#define BQ27220_I2C_SDA SDA
+#define BQ27220_I2C_SCL SCL
+#define BQ27220_DESIGN_CAPACITY 1400
+
+// LoRa
+#define USE_SX1262
+#define USE_SX1268
+
+#define LORA_EN 46 // LoRa enable pin
+#define LORA_SCK 36
+#define LORA_MISO 47
+#define LORA_MOSI 33
+#define LORA_CS 3
+
+#define LORA_DIO0 -1 // a No connect on the SX1262 module
+#define LORA_RESET 4
+#define LORA_DIO1 5 // SX1262 IRQ
+#define LORA_DIO2 6 // SX1262 BUSY
+#define LORA_DIO3   // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
+
+#define SX126X_CS LORA_CS // FIXME - we really should define LORA_CS instead
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+// Not really an E22 but TTGO seems to be trying to clone that
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 2.4
+// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
+// code)
+
+#define MODEM_POWER_EN 41
+#define MODEM_PWRKEY 40
+#define MODEM_RST 9
+#define MODEM_RI 7
+#define MODEM_DTR 8
+#define MODEM_RX 10
+#define MODEM_TX 11
+
+#define HAS_PHYSICAL_KEYBOARD 1

variants/native/portduino/platformio.ini

@@ -2,6 +2,8 @@
 extends = portduino_base
 build_flags = ${portduino_base.build_flags} -I variants/native/portduino
   -I /usr/include
+  !pkg-config --cflags --libs libnotify
+  -D HAS_LIBNOTIFY=1
 board = cross_platform
 board_level = extra
 lib_deps = 
@@ -27,7 +29,8 @@ build_type = release
 lib_deps =
   ${native_base.lib_deps}
   ${device-ui_base.lib_deps}
-build_flags = ${native_base.build_flags} -Os -lX11 -linput -lxkbcommon -ffunction-sections -fdata-sections -Wl,--gc-sections
+build_flags = ${native_base.build_flags}
+  -Os -lX11 -linput -lxkbcommon -ffunction-sections -fdata-sections -Wl,--gc-sections
   -D RAM_SIZE=16384
   -D USE_X11=1
   -D HAS_TFT=1
@@ -55,7 +58,8 @@ build_type = release
 lib_deps =
   ${native_base.lib_deps}
   ${device-ui_base.lib_deps}
-build_flags = ${native_base.build_flags} -Os -ffunction-sections -fdata-sections -Wl,--gc-sections
+build_flags = ${native_base.build_flags}
+  -Os -ffunction-sections -fdata-sections -Wl,--gc-sections
   -D RAM_SIZE=8192
   -D USE_FRAMEBUFFER=1
   -D LV_COLOR_DEPTH=32
@@ -84,7 +88,8 @@ build_type = debug
 lib_deps =
   ${native_base.lib_deps}
   ${device-ui_base.lib_deps}
-build_flags = ${native_base.build_flags} -O0 -fsanitize=address -lX11 -linput -lxkbcommon
+build_flags = ${native_base.build_flags}
+  -O0 -fsanitize=address -lX11 -linput -lxkbcommon
   -D DEBUG_HEAP
   -D RAM_SIZE=16384
   -D USE_X11=1
@@ -112,7 +117,9 @@ build_src_filter = ${env:native-tft.build_src_filter}
 
 [env:coverage]
 extends = env:native
-build_flags = -lgcov --coverage -fprofile-abs-path -fsanitize=address ${env:native.build_flags}
+build_flags =
+  -lgcov --coverage -fprofile-abs-path -fsanitize=address
+  ${env:native.build_flags}
 ; https://docs.platformio.org/en/latest/projectconf/sections/env/options/test/test_testing_command.html
 test_testing_command =
   ${platformio.build_dir}/${this.__env__}/meshtasticd