Remove dead UINT32_MAX branch from searchedTooLong

Agent-Logs-Url: https://github.com/meshtastic/firmware/sessions/6dad5b56-902e-4d0e-90c1-038a9c2df364

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

.claude/commands/diagnose.md

@@ -24,7 +24,12 @@ Call the meshtastic MCP tool bundle and format a structured health report for on
    - `mcp__meshtastic__get_config(section="lora", port=<p>)` — region, preset, channel_num, tx_power, hop_limit.
    - Optionally, if the device seems unhappy (fails to connect, `num_nodes==1` when ≥2 are plugged in, missing firmware*version), open a short firmware log window: `mcp__meshtastic__serial_open(port=<p>, env=<inferred-env>)`, wait 3s, `serial_read(session_id=<s>, max_lines=100)`, `serial_close(session_id=<s>)`. The env should be inferred from the VID map in `mcp-server/run-tests.sh` (nrf52 → rak4631, esp32s3 → heltec-v3) unless `MESHTASTIC_MCP_ENV*<ROLE>` is set.
 
-4. **Render per-device report** as:
+4. **Hub health** (call once, not per-device): `mcp__meshtastic__uhubctl_list()` — enumerates every USB hub the host can see. Note which hubs advertise `ppps=true` and which hub hosts each Meshtastic device (cross-reference by VID). Flag it in the report if:
+   - No hub advertises PPPS → `tests/recovery/` can't run on this setup; hard-recovery via `uhubctl_cycle` isn't available.
+   - A Meshtastic device is on a non-PPPS hub → note it; operator may want to move the device to a PPPS hub to unlock auto-recovery.
+   - `uhubctl_list` raises `ConfigError: uhubctl not found` → just say `uhubctl not installed` in the report; don't treat as a fault.
+
+5. **Render per-device report** as:
 
    ```text
    [nrf52 @ /dev/cu.usbmodem1101]      fw=2.7.23.bce2825, hw=RAK4631
@@ -33,20 +38,22 @@ Call the meshtastic MCP tool bundle and format a structured health report for on
      tx_power    : 30 dBm, hop_limit=3
      peers       : 1 (esp32s3 0x433c2428, pubkey ✓, SNR 6.0 / RSSI -24 dBm)
      primary ch  : McpTest
+     hub         : 1-1.3 port 2 (PPPS, uhubctl-controllable)
      firmware    : no panics in last 3s; NodeInfoModule emitted 2 broadcasts
    ```
 
-   Keep it scannable. If a field is missing or abnormal (no pubkey for a known peer, region=UNSET, num_nodes inconsistent with the hub), flag it inline with a short `⚠︎ <one-line reason>`.
+   Keep it scannable. If a field is missing or abnormal (no pubkey for a known peer, region=UNSET, num_nodes inconsistent with the hub, device on non-PPPS hub), flag it inline with a short `⚠︎ <one-line reason>`.
 
-5. **Cross-device correlation** (only when >1 device is inspected):
+6. **Cross-device correlation** (only when >1 device is inspected):
    - Do both sides see each other in `nodesByNum`? If one does and the other doesn't, that's asymmetric NodeInfo — flag it.
    - Do the LoRa configs match? (region, channel_num, modem_preset should all agree; mismatch = no mesh)
    - Do the primary channel NAMES match? Mismatch = different PSK = no decode.
 
-6. **Suggest next actions only for specific, recognisable failure modes**:
+7. **Suggest next actions only for specific, recognisable failure modes**:
    - Stale PKI pubkey one-way → "run `/test tests/mesh/test_direct_with_ack.py` — the retry + nodeinfo-ping heals this in the test path."
    - Region mismatch → "re-bake one side via `./mcp-server/run-tests.sh --force-bake`."
-   - Device unreachable → point at touch_1200bps + the CP2102-wedged-driver note in run-tests.sh.
+   - Device unreachable, reachable via DFU → `touch_1200bps(port=...)` + `pio_flash`. If not even DFU responds AND the device is on a PPPS hub, escalate to `uhubctl_cycle(role=..., confirm=True)`.
+   - CP2102-wedged-driver on macOS → see the note in `run-tests.sh`.
 
 ## What NOT to do
 

.claude/commands/repro.md

@@ -44,7 +44,8 @@ Re-run a single pytest node ID N times in isolation, track pass rate, and surfac
    - **LoRa airtime collision** → pass rate improves with fewer concurrent transmitters; propose a `time.sleep` gap or retry bump in the test body.
    - **PKI key staleness** → fails on first attempt, passes after self-heal; existing retry loop in `test_direct_with_ack.py` handles this.
    - **NodeInfo cooldown** → `Skip send NodeInfo since we sent it <600s ago` in fail-only logs; needs `broadcast_nodeinfo_ping()` warmup.
-   - **Hardware-specific** (one direction fails, other passes; one device's firmware is older; driver wedged) → specific recovery pointer.
+   - **Hardware-specific** (one direction fails, other passes; one device's firmware is older; driver wedged) → specific recovery pointer. For a device that's wedged past `touch_1200bps`, the next escalation is `uhubctl_cycle(role=..., confirm=True)` to hard-power-cycle its hub port (requires `uhubctl` installed).
+   - **Device went dark mid-run** → fails from some attempt onward, never recovers, firmware log stops arriving. Almost always hardware: a Guru crash + frozen CDC. Hard-power-cycle via `uhubctl_cycle(role=..., confirm=True)` before the next iteration; if that also fails, escalate to replug.
    - **Genuinely unknown** → say so; don't invent a root cause.
 
 7. **Report back** with:

.claude/commands/test.md

@@ -19,16 +19,21 @@ Run `mcp-server/run-tests.sh` and make sense of the output so the operator doesn
 
 2. **Read the pre-flight header.** First ~6 lines print the detected hub (role → port → env). If that line reads `detected hub : (none)`, the wrapper will narrow to `tests/unit` only — say so explicitly in your summary so the operator knows hardware tiers were skipped.
 
-3. **On pass**: one-line summary of the form `N passed, M skipped in <duration>`. Don't enumerate the 52 test names — the user can read those. Do mention if any test was SKIPPED for a NON-placeholder reason (e.g. "role not present on hub" is worth flagging).
+3. **On pass**: one-line summary of the form `N passed, M skipped in <duration>`. Don't enumerate the test names — the user can read those. Do mention any SKIPPED tests and name the cause:
+   - `"role not present on hub"` → device unplugged; operator knows to reconnect.
+   - `"firmware not baked with USERPREFS_UI_TEST_LOG"` → tests/ui skipped because the macro isn't in firmware yet; suggest `--force-bake`.
+   - `"uhubctl not installed"` → tests/recovery + peer-offline skipped; suggest `brew install uhubctl` / `apt install uhubctl`.
+   - `"no PPPS-capable hubs detected"` → tests/recovery skipped because the hub doesn't support per-port power; the tier will never run on that setup.
+   - `"opencv-python-headless is not installed"` → tests/ui auto-deselected by run-tests.sh; suggest `pip install -e 'mcp-server/.[ui]'`.
 
-4. **On failure**: for every FAILED test, open `mcp-server/tests/report.html` and extract the `Meshtastic debug` section for that test. pytest-html embeds the firmware log stream + device state dump there; the 200-line firmware log tail is usually enough to explain the failure. Summarise: which test, one-line assertion message, the firmware log lines that matter (things like `PKI_UNKNOWN_PUBKEY`, `Skip send NodeInfo`, `Error=`, `Guru Meditation`, `assertion failed`).
+4. **On failure**: for every FAILED test, open `mcp-server/tests/report.html` and extract the `Meshtastic debug` section for that test. pytest-html embeds the firmware log stream + device state dump there; the 200-line firmware log tail is usually enough to explain the failure. Summarise: which test, one-line assertion message, the firmware log lines that matter (things like `PKI_UNKNOWN_PUBKEY`, `Skip send NodeInfo`, `Error=`, `Guru Meditation`, `assertion failed`). For UI-tier failures also glance at `mcp-server/tests/ui_captures/<session>/<test>/transcript.md` — it records each step's frame + OCR.
 
 5. **Classify the failure** as one of:
    - **Transient/flake**: LoRa collision, timing-sensitive assertion, first-attempt NAK + successful retry pattern. Propose `/repro <test_node_id>` to confirm.
-   - **Environmental**: device unreachable, port busy, CP2102 driver wedged. Suggest the specific recovery (replug USB, `touch_1200bps`, check `git status userPrefs.jsonc`).
+   - **Environmental**: device unreachable, port busy, CP2102 driver wedged. Suggest the specific recovery in escalation order: (a) replug USB, (b) `touch_1200bps(port=...)` + `pio_flash` for nRF52 DFU, (c) `uhubctl_cycle(role="nrf52", confirm=True)` when a device is fully wedged past DFU (needs `uhubctl` installed — `baked_single`'s auto-recovery hook does this once automatically). Also check `git status userPrefs.jsonc`.
    - **Regression**: same assertion fails repeatedly, firmware log shows a new/unusual error. Surface the diff between expected and observed, identify the module likely responsible.
 
-6. **Never run destructive recovery automatically.** If a failure looks like it needs a reflash, factory*reset, or USB replug, \_describe what to do* — don't execute. The operator decides.
+6. **Never run destructive recovery automatically.** If a failure looks like it needs a reflash, factory*reset, `uhubctl_cycle`, or USB replug, \_describe what to do* — don't execute. The operator decides.
 
 ## Arguments handling
 

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -75,11 +75,11 @@ body:
   - type: checkboxes
     id: mui
     attributes:
-      label: Is this bug report about any UI component firmware like InkHUD or Meshtatic UI (MUI)?
+      label: Is this bug report about any UI (https://meshtastic.org/docs/configuration/device-uis/) component firmware?
       options:
-        - label: Meshtastic UI aka MUI colorTFT
-        - label: InkHUD ePaper
-        - label: OLED slide UI on any display
+        - label: Meshtastic UI aka MUI
+        - label: InkHUD
+        - label: BaseUI
 
   - type: input
     id: version

.github/copilot-instructions.md

@@ -70,6 +70,70 @@ PKI (Public Key Infrastructure) messages have special handling:
 - Accepted on a special "PKI" channel
 - Allow encrypted DMs between nodes that discovered each other on downlink-enabled channels
 
+## Encryption & Key Management
+
+Meshtastic packets on the air are typically encrypted one of two ways: the **per-channel symmetric** layer (AES-CTR with a shared PSK) for broadcasts and channel traffic, and the **per-peer PKI** layer (X25519 ECDH → AES-256-CCM) for direct messages and remote admin. A channel with a 0-byte PSK (or Ham mode, which wipes PSKs) transmits cleartext — see the size table below. Both are implemented in `src/mesh/CryptoEngine.cpp`; the send/receive dispatch lives in `src/mesh/Router.cpp`; admin authorization lives in `src/modules/AdminModule.cpp`.
+
+### High-level model
+
+- **Channels** are symmetric rooms: anyone with the PSK can read any message on the channel. Channel 0 is the "primary" channel and ships with the short-form default PSK on factory devices, forming the public mesh most users join. (The LoRa modem preset `LONG_FAST` lives on `config.lora.modem_preset` and is an independent field — don't conflate "channel 0 default PSK" with the modem preset name.)
+- **DMs** addressed to a single node require PKI so that other holders of the channel PSK can't read them. Outside Ham mode, Meshtastic does not fall back to channel-symmetric encryption when the destination public key is unknown.
+- **Remote admin** is a DM carrying an `AdminMessage`. The receiver only acts on it if the sender's public key is on its allowlist (`config.security.admin_key[0..2]`).
+- **Ham mode** (`owner.is_licensed=true`, where `owner` is the local `meshtastic_User` record) disables PKI entirely and sends cleartext — FCC Part 97 prohibits encryption on amateur bands.
+- **No ratchet, no session.** Every packet is encrypted from scratch — a stateless design that matches the high-loss, store-and-forward nature of LoRa.
+
+### Symmetric channel encryption (AES-CTR)
+
+`CryptoEngine::encryptPacket` / `decrypt` / `encryptAESCtr` in `src/mesh/CryptoEngine.cpp`.
+
+- **Cipher**: AES-CTR, AES-128 or AES-256 depending on key length. Same routine in both directions (CTR is a stream cipher, so encrypt == decrypt).
+- **Key**: `ChannelSettings.psk` bytes. Size semantics:
+  - **0 bytes** → no encryption, cleartext on the air
+  - **1 byte** → short-form index into the well-known `defaultpsk[]` in `src/mesh/Channels.h`. Index 0 = cleartext; 1 = defaultpsk unchanged; 2..255 = defaultpsk with its last byte incremented by (index − 1). This is what the CLI's `--ch-set psk default` produces.
+  - **16 bytes** → raw AES-128 key
+  - **32 bytes** → raw AES-256 key
+  - **2..15 bytes** → zero-padded to 16 and used as AES-128 (with a warn log); **17..31 bytes** → zero-padded to 32 and used as AES-256 (with a warn log). Defensive fallback for malformed PSK input, not something to rely on.
+- **Nonce (128 bit)**: `packet_id` (u64 LE) ‖ `from_node` (u32 LE) ‖ `block_counter` (u32, starts at 0). Built in `CryptoEngine::initNonce`.
+- **No AEAD**: channel packets carry no MAC, so the channel-hash byte is not an integrity or authenticity check. `Channels::getHash` is a 1-byte XOR-derived hint over the channel name bytes and PSK bytes that helps receivers pick a candidate channel/PSK for decryption. Because it is only a small hint and collisions are easy to find, it should be described purely as a PSK-selection aid, not as a security filter an attacker cannot bypass.
+- **Channel 0 is special in one way only**: it's the channel the Router attempts PKI decryption on before falling through to AES-CTR. Non-zero channels always go straight to AES-CTR.
+
+### PKI encryption for DMs (X25519 ECDH + AES-256-CCM)
+
+`CryptoEngine::encryptCurve25519` / `decryptCurve25519` in `src/mesh/CryptoEngine.cpp`.
+
+- **Keypair**: Curve25519 (aka X25519), 32-byte public + 32-byte private. Stored in `config.security.public_key` / `private_key`; the public half is mirrored into `owner.public_key` so it rides along in NodeInfo broadcasts and propagates through the mesh like any other identity field.
+- **Key generation** (`generateKeyPair`): stirs `HardwareRNG::fill()` (64 B from platform TRNG when available), the 16-byte `myNodeInfo.device_id`, and a call to `random()` into the rweather/Crypto library's software RNG, then `Curve25519::dh1`. `regeneratePublicKey` recomputes the public half from a known private (used when restoring from backup).
+- **Keygen entry points**: at boot, `NodeDB` calls `generateKeyPair` (or `regeneratePublicKey` when a stored private key is present and passes a low-entropy check) **directly** when `!owner.is_licensed` and `config.lora.region != UNSET`. `ensurePkiKeys` wraps the same logic for runtime/admin flows — it's the path `AdminModule::handleSetConfig` runs when first assigning a valid region or when security config is written; **do not assume it's the universal boot-time gate**, because the NodeDB path bypasses it.
+- **Handshake**: `Curve25519::dh2(local_private, remote_public) → 32-byte shared secret → SHA-256 → 32-byte AES-256 key`. Recomputed per packet. The SHA-256 step is effectively a KDF over the raw ECDH output.
+- **Cipher**: AES-256-CCM via `aes_ccm_ae` / `aes_ccm_ad` (`src/mesh/aes-ccm.cpp`). MAC length (the `M` parameter) is **8 bytes**. No AAD — the MAC covers ciphertext only.
+- **Nonce (13 bytes / 104 bit)**: `aes_ccm_ae`/`aes_ccm_ad` use a 13-byte CCM nonce (`L = 2` is hardcoded in `src/mesh/aes-ccm.cpp`), not a 16-byte nonce. For PKI packets, `CryptoEngine::initNonce(fromNode, packetNum, extraNonce)` starts from the usual packet-derived nonce material, then overwrites nonce bytes `4..7` with a fresh 32-bit `extraNonce = random()`. The effective nonce bytes are therefore: bytes `0..3` = `packet_id`, bytes `4..7` = transmitted `extraNonce`, bytes `8..11` = `from_node`, byte `12` = `0x00`. The receiver reconstructs the same 13-byte nonce from the packet metadata plus the appended `extraNonce`.
+- **Wire overhead**: 12 bytes appended to the ciphertext = 8-byte MAC ‖ 4-byte extraNonce. Defined as `MESHTASTIC_PKC_OVERHEAD = 12` in `src/mesh/RadioInterface.h`. Only the 4-byte `extraNonce` is sent; the rest of the 13-byte CCM nonce is reconstructed from packet fields as described above. The Router's send path checks this overhead against `MAX_LORA_PAYLOAD_LEN` before committing to PKI.
+- **Send selection** (`Router::send`): the sender enters the PKI path when **all** hold — we're the originator AND not Ham mode AND not Portduino simradio AND not on the `serial`/`gpio` channels (unless the packet is already marked `pki_encrypted`) AND `config.security.private_key.size == 32` AND destination is a single node (not broadcast) AND the portnum isn't infrastructure. `TRACEROUTE_APP`, `NODEINFO_APP`, `ROUTING_APP`, and `POSITION_APP` are routed through channel encryption even when DMed (these need to be readable by relaying peers). Once on the PKI path, if the destination's public key isn't in our NodeDB the send **fails** with `PKI_SEND_FAIL_PUBLIC_KEY` — it does not silently fall back to channel encryption. If the client explicitly set `pki_encrypted=true` and any condition blocks PKI, the send fails with `PKI_FAILED`.
+- **Receive selection** (`Router::perhapsDecode`): try PKI decrypt first when `channel == 0` AND `isToUs(p)` AND not broadcast AND both peers have public keys in NodeDB AND `rawSize > MESHTASTIC_PKC_OVERHEAD`. On success the packet gets `pki_encrypted=true` stamped and the sender's public key copied into `p->public_key` for downstream authorization.
+
+### Remote admin authorization
+
+Implemented in `src/modules/AdminModule.cpp` → `handleReceivedProtobuf`. The authorization check runs in this order:
+
+1. **Response messages** — if `messageIsResponse(r)` is true (the payload is a response to one of our earlier admin requests), it's accepted without any further check. The in-file comment flags this as a known-untightened gap: a stricter implementation would remember which `public_key` we last queried and reject responses that don't match.
+2. **Local admin** — `mp.from == 0` (phone app over BLE, serial CLI, internal module); never travels over the air. **Rejected** if `config.security.is_managed` is true, because managed devices expect admin to arrive over the air through an authorized remote path.
+3. **Legacy admin channel (deprecated)** — the packet arrived on a channel named literally `"admin"`. Gated by `config.security.admin_channel_enabled`; returns `NOT_AUTHORIZED` if the flag is false. Kept for backward compatibility; new deployments should use PKI admin.
+4. **PKI admin (preferred for remote)** — `mp.pki_encrypted == true` AND `mp.public_key` matches one of `config.security.admin_key[0..2]` (up to three authorized 32-byte Curve25519 public keys, typically copied from the admin node's own `user.public_key`).
+5. **Fallthrough** → `NOT_AUTHORIZED`.
+
+On top of authorization, any remote admin message that **mutates** state (not a request, not a response) also has to pass a session-key check (`checkPassKey`): the client must first pull a fresh 8-byte `session_passkey` via `get_admin_session_key_request`, then echo that passkey back in the mutating message. The device rotates the passkey after 150 s and rejects values older than 300 s — a narrow anti-replay window on top of the PKI layer.
+
+`config.security.is_managed = true` disables **local** admin writes (`mp.from == 0` is rejected). It does not by itself force every admin action through PKI — the legacy `"admin"` channel still authorizes remote admin when `config.security.admin_channel_enabled == true`. The AdminModule refuses to persist `is_managed=true` unless at least one `admin_key` is populated — a deliberate guard against operators locking themselves out.
+
+### Key-rotation hazards (actions that invalidate peers)
+
+- **`factory_reset_device`** (the "full" variant, calls `NodeDB::factoryReset(eraseBleBonds=true)`) → **wipes** the X25519 private key; a fresh keypair is generated on the next region-set. Every existing peer holds the old public key, so DMs to this node silently fail PKI decrypt until every peer re-exchanges NodeInfo.
+- **`factory_reset_config`** (the "partial" variant, calls `NodeDB::factoryReset()` with `eraseBleBonds=false`) → **preserves** the X25519 private key in `installDefaultConfig(preserveKey=true)`; the public key is zeroed and gets rebuilt from the preserved private key on the next boot via the NodeDB path's `regeneratePublicKey` call. Identity is preserved and the mesh does not need to re-exchange keys.
+- **`region=UNSET → valid region`** → `ensurePkiKeys` runs inside the same `handleSetConfig` path; missing keys get generated at that moment.
+- **Ham mode transitions** — entering Ham mode (`user.is_licensed=true`) runs `Channels::ensureLicensedOperation`, which **wipes every channel PSK** (all traffic becomes cleartext) and disables the legacy admin channel. The X25519 private key is preserved on the device but not used because `Router::send` skips PKI when `owner.is_licensed` is true. Leaving Ham mode re-enables PKI with the preserved keypair but does not restore the wiped channel PSKs — the operator has to re-set them.
+- **Channel 0 PSK change** → every peer must re-learn the channel hash; cached NodeInfo becomes temporarily unreachable until the next broadcast.
+- **`security.private_key` blanked via admin** → regenerates both halves (unless in Ham mode) and propagates the new public key via NodeInfo.
+
 ## Project Structure
 
 ```
@@ -80,7 +144,7 @@ firmware/
 │   │   ├── NodeDB.*       # Node database management
 │   │   ├── Router.*       # Packet routing
 │   │   ├── Channels.*     # Channel management
-│   │   ├── CryptoEngine.* # AES-CCM encryption
+│   │   ├── CryptoEngine.* # AES-CTR (channels) + X25519 ECDH→AES-256-CCM (PKI for DMs/admin)
 │   │   ├── *Interface.*   # Radio interface implementations
 │   │   ├── api/           # WiFi/Ethernet server APIs (ServerAPI, PacketAPI)
 │   │   ├── http/          # HTTP server (WebServer, ContentHandler)
@@ -296,6 +360,23 @@ Key defines in variant.h:
 
 ## Build System
 
+## Agent Tooling Baseline
+
+Mirror counterpart: `AGENTS.md` under **Agent Tooling Baseline**.
+
+To reduce avoidable agent mistakes, assume these tools are available (or install them before significant repo work):
+
+- **Required CLI basics**: `bash`, `git`, `find`, `grep`, `sed`, `awk`, `xargs`
+- **Strongly recommended**: `rg` (ripgrep) for fast file/text search, `jq` for JSON processing
+- **Build/test tools**: `python3`, `pip`, virtualenv (`python3 -m venv`), `platformio` (`pio`)
+- **Containerized native testing**: `docker` (especially important on macOS / non-Linux hosts)
+
+Fallback expectations for agents:
+
+- If `rg` is unavailable, use `find` + `grep` instead of failing.
+- For native tests on hosts without Linux deps, prefer `./bin/test-native-docker.sh`.
+- The simulator helper script is `./bin/test-simulator.sh`.
+
 Uses **PlatformIO** with custom scripts:
 
 - `bin/platformio-pre.py` - Pre-build script
@@ -448,6 +529,8 @@ Run with: `pio test -e native`
 
 Simulation testing: `bin/test-simulator.sh`
 
+Quick entry point for new test modules: `test/README.md` (native unit-test authoring guide, skeleton, pitfalls, and setup checklist).
+
 ### Hardware-in-the-loop tests (`mcp-server/tests/`)
 
 Separate pytest suite that exercises real USB-connected Meshtastic devices. See the **MCP Server & Hardware Test Harness** section below for invocation, tier layout, and agent usage rules.
@@ -474,7 +557,7 @@ The repo registers the server via `.mcp.json` at the repo root — Claude Code p
 
 **One MCP call per port at a time.** `SerialInterface` holds an exclusive OS-level lock on the serial port for its lifetime. If a `serial_*` session is open on `/dev/cu.usbmodem101`, calling `device_info` on the same port will fail fast pointing at the active session. Sequence calls: open → read/mutate → close, then next device. Never parallelize tool calls on the same port.
 
-### MCP tool surface (~32 tools)
+### MCP tool surface (43 tools)
 
 Grouped by purpose. Full argument shapes in `mcp-server/README.md`; a few high-value signatures are called out here.
 
@@ -482,11 +565,13 @@ Grouped by purpose. Full argument shapes in `mcp-server/README.md`; a few high-v
 - **Build & flash**: `build`, `clean`, `pio_flash`, `erase_and_flash` (ESP32 only), `update_flash` (ESP32 OTA), `touch_1200bps`
 - **Serial sessions** (long-running, 10k-line ring buffer): `serial_open`, `serial_read`, `serial_list`, `serial_close`
 - **Device reads**: `device_info`, `list_nodes`
-- **Device writes** (all require `confirm=True`): `set_owner`, `get_config`, `set_config`, `get_channel_url`, `set_channel_url`, `send_text`, `reboot`, `shutdown`, `factory_reset`, `set_debug_log_api`
+- **Device writes**: `set_owner`, `get_config`, `set_config`, `get_channel_url`, `set_channel_url`, `send_text`, `send_input_event` (inject a button/key press via the firmware's InputBroker), `set_debug_log_api`; destructive/power-state writes require `confirm=True`: `reboot`, `shutdown`, `factory_reset`
 - **userPrefs admin** (build-time constants, not runtime config): `userprefs_get`, `userprefs_set`, `userprefs_reset`, `userprefs_manifest`, `userprefs_testing_profile`
 - **Vendor escape hatches**: `esptool_chip_info`, `esptool_erase_flash`, `esptool_raw`, `nrfutil_dfu`, `nrfutil_raw`, `picotool_info`, `picotool_load`, `picotool_raw`
+- **USB power control** (via `uhubctl`, per-port PPPS toggle): `uhubctl_list` (read-only), `uhubctl_power(action='on'|'off', confirm=True)`, `uhubctl_cycle(delay_s, confirm=True)`. Target by raw `(location, port)` or by `role` (`"nrf52"`, `"esp32s3"`); role lookup checks `MESHTASTIC_UHUBCTL_LOCATION_<ROLE>` + `_PORT_<ROLE>` env vars first, falls back to VID auto-detection.
+- **Observability** (UI tier + operator ad-hoc): `capture_screen(role, ocr=True)` — grabs a USB-webcam frame of the device OLED and optionally OCRs it. Requires `mcp-server[ui]` extras (`opencv-python-headless`, `easyocr`) and `MESHTASTIC_UI_CAMERA_DEVICE_<ROLE>` env var; falls through to a 1×1 black PNG `NullBackend` when unconfigured.
 
-`confirm=True` is a tool-level gate on top of whatever permission prompt your MCP host shows. **Don't bypass it** by asking the host to auto-approve — it exists specifically because MCP hosts sometimes remember "always allow this tool" and that's dangerous for `factory_reset` and `erase_and_flash`.
+`confirm=True` is a tool-level gate on top of whatever permission prompt your MCP host shows. **Don't bypass it** by asking the host to auto-approve — it exists specifically because MCP hosts sometimes remember "always allow this tool" and that's dangerous for `factory_reset`, `erase_and_flash`, `uhubctl_power(action='off')`, and `uhubctl_cycle`.
 
 ### Hardware test suite (`mcp-server/run-tests.sh`)
 
@@ -494,14 +579,16 @@ The wrapper auto-detects connected devices (VID → role map: `0x239A` → `nrf5
 
 Suite tiers (collected + run in this order via `pytest_collection_modifyitems`):
 
-1. `tests/unit/` — pure Python (boards parse, pio wrapper, userPrefs parse, testing profile). No hardware.
+1. `tests/unit/` — pure Python (boards parse, pio wrapper, userPrefs parse, testing profile, uhubctl parser). No hardware.
 2. `tests/test_00_bake.py` — flashes each detected device with current `userPrefs.jsonc` merged with the session's test profile. Has its own skip-if-already-baked check comparing region + primary channel to the session profile; skips cheaply on warm devices.
-3. `tests/mesh/` — multi-device mesh: bidirectional send, broadcast delivery, direct-with-ACK, mesh formation within 60s. Parametrized `[nrf52->esp32s3]` and `[esp32s3->nrf52]`.
+3. `tests/mesh/` — multi-device mesh: bidirectional send, broadcast delivery, direct-with-ACK, mesh formation within 60s. Parametrized `[nrf52->esp32s3]` and `[esp32s3->nrf52]`. Includes `test_peer_offline_recovery` which uses uhubctl to physically power off one peer mid-conversation (requires uhubctl; skips without).
 4. `tests/telemetry/` — `DEVICE_METRICS_APP` broadcast timing.
 5. `tests/monitor/` — boot-log panic check.
-6. `tests/fleet/` — PSK seed session isolation.
-7. `tests/admin/` — channel URL roundtrip, owner persistence across reboot.
-8. `tests/provisioning/` — region + modem + slot bake, admin key presence, `UNSET` region blocks TX, userPrefs survive factory reset.
+6. `tests/recovery/` — `uhubctl` power-cycle round-trip + NVS persistence across hard reset. Requires `uhubctl` installed and a PPPS-capable hub; entire tier auto-skips otherwise.
+7. `tests/ui/` — input-broker-driven screen navigation with camera + OCR evidence.
+8. `tests/fleet/` — PSK seed session isolation.
+9. `tests/admin/` — channel URL roundtrip, owner persistence across reboot.
+10. `tests/provisioning/` — region + modem + slot bake, admin key presence, `UNSET` region blocks TX, userPrefs survive factory reset.
 
 Invocation patterns:
 
@@ -586,15 +673,19 @@ If you're modifying `StreamAPI`, `PhoneAPI`, `NodeInfoModule`, or `userPrefs` fl
 
 ### Recovery playbooks
 
-| Symptom                                                    | First check                                                   | Fix                                                                                                                                                                        |
-| ---------------------------------------------------------- | ------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| `userPrefs.jsonc` dirty after test run                     | `git status --porcelain userPrefs.jsonc`                      | If non-empty, re-run `./mcp-server/run-tests.sh` once — the pre-flight self-heal restores from sidecar. If still dirty, `git checkout userPrefs.jsonc`.                    |
-| Port busy / wedged CP2102 on macOS                         | `lsof /dev/cu.usbserial-0001`                                 | Kill the holder. USB replug if the kernel still reports busy. Often a stale `pio device monitor` or zombie `meshtastic_mcp` process.                                       |
-| nRF52 appears unresponsive                                 | `list_devices` shows VID `0x239A` but `device_info` times out | `touch_1200bps(port=...)` drops it into the DFU bootloader → `pio_flash` re-installs.                                                                                      |
-| Multiple MCP server processes                              | `ps aux \| grep meshtastic_mcp` shows >1                      | Kill all but the one your MCP host spawned. Zombies hold ports and break tests.                                                                                            |
-| Mesh formation fails, one side sees peer but other doesn't | `/diagnose` (or `list_nodes` on both sides)                   | Asymmetric NodeInfo. `test_direct_with_ack` has a heal path; `/repro` it a few times. If persistent, both devices' clocks may be out of sync with their NodeInfo cooldown. |
-| "role not present on hub" in skip reasons                  | `list_devices`                                                | Expected if a device is unplugged. Reconnect before re-running the tier.                                                                                                   |
-| Tests fail only on first attempt then pass on rerun        | —                                                             | State leak from a prior session. Run with `--force-bake` to reset to a known state.                                                                                        |
+| Symptom                                                                           | First check                                                   | Fix                                                                                                                                                                                                                              |
+| --------------------------------------------------------------------------------- | ------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| `userPrefs.jsonc` dirty after test run                                            | `git status --porcelain userPrefs.jsonc`                      | If non-empty, re-run `./mcp-server/run-tests.sh` once — the pre-flight self-heal restores from sidecar. If still dirty, `git checkout userPrefs.jsonc`.                                                                          |
+| Port busy / wedged CP2102 on macOS                                                | `lsof /dev/cu.usbserial-0001`                                 | Kill the holder. USB replug if the kernel still reports busy. Often a stale `pio device monitor` or zombie `meshtastic_mcp` process.                                                                                             |
+| nRF52 appears unresponsive                                                        | `list_devices` shows VID `0x239A` but `device_info` times out | `touch_1200bps(port=...)` drops it into the DFU bootloader → `pio_flash` re-installs.                                                                                                                                            |
+| Device fully wedged (Guru Meditation, frozen CDC, no DFU)                         | `list_devices` shows the VID but every admin call times out   | `uhubctl_cycle(role="nrf52", confirm=True)` hard-power-cycles the port via USB hub PPPS. `baked_single`'s auto-recovery hook does this once automatically if uhubctl is installed. Falls back to physical replug if no PPPS hub. |
+| Multiple MCP server processes                                                     | `ps aux \| grep meshtastic_mcp` shows >1                      | Kill all but the one your MCP host spawned. Zombies hold ports and break tests.                                                                                                                                                  |
+| Mesh formation fails, one side sees peer but other doesn't                        | `/diagnose` (or `list_nodes` on both sides)                   | Asymmetric NodeInfo. `test_direct_with_ack` has a heal path; `/repro` it a few times. If persistent, both devices' clocks may be out of sync with their NodeInfo cooldown.                                                       |
+| "role not present on hub" in skip reasons                                         | `list_devices`                                                | Expected if a device is unplugged. Reconnect before re-running the tier.                                                                                                                                                         |
+| Entire `tests/recovery/` tier skipped                                             | `command -v uhubctl`                                          | Expected if `uhubctl` isn't on PATH. Install via `brew install uhubctl` (macOS) or `apt install uhubctl` (Debian/Ubuntu). Also skips if no hub advertises PPPS.                                                                  |
+| Entire `tests/ui/` tier skipped ("firmware not baked with USERPREFS_UI_TEST_LOG") | reportlog.jsonl for the skip reason                           | Re-run with `--force-bake` so the UI-log macro gets compiled into the fresh firmware. First run after the Round-3 landing always re-bakes.                                                                                       |
+| `tests/ui/` runs but captures are all 1×1 black PNGs                              | `MESHTASTIC_UI_CAMERA_DEVICE_ESP32S3`                         | Env var not set → `NullBackend`. Point a USB webcam at the heltec-v3 OLED and set the device index; `.venv/bin/python -c "import cv2; [print(i, cv2.VideoCapture(i).read()[0]) for i in range(5)]"` discovers it.                |
+| Tests fail only on first attempt then pass on rerun                               | —                                                             | State leak from a prior session. Run with `--force-bake` to reset to a known state.                                                                                                                                              |
 
 ### Never do these without asking
 

.github/prompts/mcp-diagnose.prompt.md

@@ -26,7 +26,12 @@ This prompt assumes the meshtastic MCP server is registered with your VS Code Co
    - `get_config(section="lora", port=<p>)` → region, preset, channel_num, tx_power, hop_limit
    - If anything looks off (can't connect, `num_nodes` wrong, missing `firmware_version`), open a short firmware-log window: `serial_open(port=<p>, env=<inferred>)`, wait 3 seconds, `serial_read(session_id, max_lines=100)`, `serial_close(session_id)`. Infer env from VID (0x239a → `rak4631`, 0x303a/0x10c4 → `heltec-v3`) unless an `MESHTASTIC_MCP_ENV_<ROLE>` env var overrides it.
 
-4. **Render per-device report** as a compact block:
+4. **Hub health** (call once, not per-device): `uhubctl_list()` — enumerates every USB hub the host sees. Cross-reference each Meshtastic device's VID to find which hub + port it's on. Flag in the report if:
+   - No hub advertises `ppps=true` → `tests/recovery/` can't run; hard-recovery via `uhubctl_cycle` isn't available.
+   - A Meshtastic device is on a non-PPPS hub → note it; moving to a PPPS hub unlocks auto-recovery.
+   - `uhubctl_list` raises `ConfigError: uhubctl not found` → report as "uhubctl not installed"; don't treat as a device fault.
+
+5. **Render per-device report** as a compact block:
 
    ```text
    [nrf52 @ /dev/cu.usbmodem1101]      fw=2.7.23.bce2825, hw=RAK4631
@@ -35,20 +40,22 @@ This prompt assumes the meshtastic MCP server is registered with your VS Code Co
      tx_power    : 30 dBm, hop_limit=3
      peers       : 1 (esp32s3 0x433c2428, pubkey ✓, SNR 6.0 / RSSI -24 dBm)
      primary ch  : McpTest
+     hub         : 1-1.3 port 2 (PPPS, uhubctl-controllable)
      firmware    : no panics in last 3s
    ```
 
-   Flag abnormalities inline with `⚠︎ <short reason>` — missing pubkey on a known peer, region UNSET, mismatched channel name, etc.
+   Flag abnormalities inline with `⚠︎ <short reason>` — missing pubkey on a known peer, region UNSET, mismatched channel name, device on non-PPPS hub, etc.
 
-5. **Cross-device correlation** (when >1 device selected):
+6. **Cross-device correlation** (when >1 device selected):
    - Do both see each other in `nodesByNum`?
    - Do `region`, `channel_num`, `modem_preset` match across devices?
    - Do the primary channel names match? (Different name → different PSK → no decode.)
 
-6. **Suggest next steps only for recognizable failure modes**, never speculatively:
+7. **Suggest next steps only for recognizable failure modes**, never speculatively:
    - Stale PKI one-way → "`/mcp-test tests/mesh/test_direct_with_ack.py` — the test's retry+nodeinfo-ping heals this."
    - Region mismatch → "re-bake one side via `./mcp-server/run-tests.sh --force-bake`."
-   - Device unreachable → refer operator to the touch_1200bps + CP2102-wedged-driver notes in `run-tests.sh`.
+   - Device unreachable, DFU reachable → `touch_1200bps(port=...)` + `pio_flash`. If not even DFU responds and the device is on a PPPS hub, escalate to `uhubctl_cycle(role=..., confirm=True)`.
+   - CP2102-wedged-driver on macOS → see `run-tests.sh` notes.
 
 ## Hard constraints
 

.github/prompts/mcp-repro.prompt.md

@@ -46,7 +46,8 @@ Equivalent of `.claude/commands/repro.md`. Use when the operator says "that one
    - **LoRa airtime collision** — pass rate improves with fewer concurrent transmitters. Suggest a `time.sleep` gap or retry bump in the test body.
    - **PKI key staleness** — first attempt fails, subsequent ones pass; existing retry-loop pattern in `test_direct_with_ack.py` is the fix.
    - **NodeInfo cooldown** — `Skip send NodeInfo since we sent it <600s ago` in fail-only logs; needs a `broadcast_nodeinfo_ping()` warmup.
-   - **Hardware-specific** — one direction consistently fails, firmware versions differ, CP2102 driver wedged, etc.
+   - **Hardware-specific** — one direction consistently fails, firmware versions differ, CP2102 driver wedged, etc. For a device wedged past `touch_1200bps`, recommend `uhubctl_cycle(role=..., confirm=True)` to hard-power-cycle its hub port (requires `uhubctl` installed).
+   - **Device went dark mid-run** — fails from some iteration onward and never recovers; firmware log stops arriving. Almost always a Guru crash with frozen CDC. Recommend `uhubctl_cycle` before the next iteration; escalate to replug if that also fails.
    - **Unknown** — say so. Don't invent a root cause.
 
 7. **Report back** with:

.github/prompts/mcp-test.prompt.md

@@ -21,19 +21,25 @@ Equivalent of the Claude Code `/test` slash command in `.claude/commands/test.md
 
 2. **Read the pre-flight header** (first few lines of wrapper output). The `detected hub :` line lists role → port → env mappings. If it reads `(none)`, the wrapper narrowed to `tests/unit` only — call that out explicitly so the operator knows hardware tiers were skipped.
 
-3. **On pass**: one-line summary like `N passed, M skipped in <duration>`. Don't enumerate test names. DO mention any non-placeholder SKIPs (things like "role not present on hub") because they indicate missing hardware or setup issues.
+3. **On pass**: one-line summary like `N passed, M skipped in <duration>`. Don't enumerate test names. DO mention any non-placeholder SKIPs and name the cause:
+   - `"role not present on hub"` → device unplugged; operator should reconnect.
+   - `"firmware not baked with USERPREFS_UI_TEST_LOG"` → tests/ui skipped; the UI-log compile macro isn't in the baked firmware. Suggest `--force-bake`.
+   - `"uhubctl not installed"` → tests/recovery + `test_peer_offline_recovery` skipped. Suggest `brew install uhubctl` / `apt install uhubctl`.
+   - `"no PPPS-capable hubs detected"` → tests/recovery skipped because the attached hub doesn't support per-port power switching; won't run on that setup.
+   - `"opencv-python-headless is not installed"` → tests/ui auto-deselected by `run-tests.sh`. Suggest `pip install -e 'mcp-server/.[ui]'`.
 
 4. **On failure**: open `mcp-server/tests/report.html` (pytest-html output, self-contained) and extract the `Meshtastic debug` section for each failed test. That section includes a firmware log stream (last 200 lines) and device state dump. For each failure, summarise:
    - test name
    - one-line assertion message
    - the specific firmware log lines that explain why (look for `PKI_UNKNOWN_PUBKEY`, `Skip send NodeInfo`, `Error=`, `Guru Meditation`, `assertion failed`, `No suitable channel`)
+   - for UI-tier failures also check `mcp-server/tests/ui_captures/<session>/<test>/transcript.md` (per-step frame + OCR)
 
 5. **Classify each failure** as one of:
    - **Transient flake** — LoRa collision, first-attempt NAK with self-heal pattern, timing-sensitive assertion. Suggest `/mcp-repro <test-id>` to confirm.
-   - **Environmental** — device unreachable, port busy, CP2102 driver wedged on macOS. Suggest specific recovery (USB replug, `touch_1200bps`, `git status userPrefs.jsonc`).
+   - **Environmental** — device unreachable, port busy, CP2102 driver wedged on macOS. Suggest recovery in escalation order: (a) replug USB, (b) `touch_1200bps` + `pio_flash` for nRF52 DFU, (c) `uhubctl_cycle(role=..., confirm=True)` for a device wedged past DFU (needs `uhubctl` installed; `baked_single` does this once automatically when available). Also check `git status userPrefs.jsonc`.
    - **Regression** — same assertion fails repeatedly on re-runs, firmware log shows novel errors. Identify the firmware module likely responsible.
 
-6. **Do NOT run destructive recovery automatically**. If a failure looks like it needs a reflash, factory*reset, or replug — \_describe the steps* and let the operator decide. Never burn airtime or flash cycles without approval.
+6. **Do NOT run destructive recovery automatically**. If a failure looks like it needs a reflash, factory*reset, `uhubctl_cycle`, or replug — \_describe the steps* and let the operator decide. Never burn airtime or flash cycles without approval.
 
 ## Arguments convention
 

.github/prompts/new-module.prompt.md

@@ -118,7 +118,7 @@ CallbackObserver<MyModule, const meshtastic::Status *> statusObserver =
 
 Add test suite in `test/test_mymodule/`:
 
-```
+```text
 test/
 └── test_mymodule/
     └── test_main.cpp

.github/prompts/new-variant.prompt.md

@@ -6,7 +6,7 @@ Guide for adding a new Meshtastic hardware variant to the firmware.
 
 Create under `variants/<arch>/<name>/`:
 
-```
+```text
 variants/
 ├── esp32/          # ESP32
 ├── esp32s3/        # ESP32-S3

.github/workflows/build_one_target.yml

@@ -4,14 +4,9 @@ on:
   workflow_dispatch:
     inputs:
       # trunk-ignore(checkov/CKV_GHA_7)
-      target:
-        type: string
-        required: false
-        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
       arch:
         type: choice
         options:
-          - all
           - esp32
           - esp32s3
           - esp32c3
@@ -20,18 +15,32 @@ on:
           - rp2040
           - rp2350
           - stm32
-        description: Choose an arch to limit the search, or 'all' to search all architectures.
-        default: all
+      target:
+        type: string
+        required: false
+        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
+      # find-target:
+      #   type: boolean
+      #   default: true
+      #   description: 'Find the available targets'
 
 permissions: read-all
 
 jobs:
   find-targets:
+    if: ${{ inputs.target == '' }}
     strategy:
       fail-fast: false
       matrix:
         arch:
-          - all
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
     runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v6
@@ -42,37 +51,14 @@ jobs:
       - run: pip install -U platformio
       - name: Generate matrix
         id: jsonStep
-        env:
-          BUILDTARGET: ${{ inputs.target }}
-          MATRIXARCH: ${{ inputs.arch }}
         run: |
           TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level extra)
-          if [ "$BUILDTARGET" = "" ]; then
-            echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
-            echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
-            echo "Arch: $MATRIXARCH" >> $GITHUB_STEP_SUMMARY
-            echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
-            echo "## 🎯 The following target boards are available to build:" >> $GITHUB_STEP_SUMMARY
-            echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
-            echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
-            echo $TARGETS | jq -r 'sort_by(.board) | sort_by(.platform) |.[] | "| " + .platform + " | " + .board + " |" ' >> $GITHUB_STEP_SUMMARY
-          else
-            echo "We build this one:" >> $GITHUB_STEP_SUMMARY
-            ARCH=$(echo "$TARGETS" | jq --arg BUILDTARGET "$BUILDTARGET" -r '.[] | select(.board==$BUILDTARGET) | .platform')
-            echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
-            echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
-            echo "| $ARCH | "$BUILDTARGET" |" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            if [[ "$ARCH" == "" ]]; then
-              echo "## ❌ Error: Target "$BUILDTARGET" not found!" >> $GITHUB_STEP_SUMMARY
-            else
-              echo "## ✅ Target "$BUILDTARGET" found, proceeding to build." >> $GITHUB_STEP_SUMMARY
-            fi
-            echo "You may need to refresh this page to make the built firmware appear below." >> $GITHUB_STEP_SUMMARY
-            echo "arch=$ARCH" >> $GITHUB_OUTPUT
-          fi
-    outputs:
-      arch: ${{ steps.jsonStep.outputs.arch }}
+          echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
+          echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
+          echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
+          echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
+          echo "Targets:" >> $GITHUB_STEP_SUMMARY
+          echo $TARGETS | jq -r 'sort_by(.board) |.[] | "- " + .board' >> $GITHUB_STEP_SUMMARY
 
   version:
     if: ${{ inputs.target != '' }}
@@ -92,12 +78,12 @@ jobs:
 
   build:
     if: ${{ inputs.target != '' && inputs.arch != 'native' }}
-    needs: [version, find-targets]
+    needs: [version]
     uses: ./.github/workflows/build_firmware.yml
     with:
       version: ${{ needs.version.outputs.long }}
       pio_env: ${{ inputs.target }}
-      platform: ${{ needs.find-targets.outputs.arch }}
+      platform: ${{ inputs.arch }}
 
   gather-artifacts:
     permissions:

.trunk/trunk.yaml

@@ -8,18 +8,18 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.517
-    - renovate@43.110.9
-    - prettier@3.8.1
-    - trufflehog@3.94.3
+    - checkov@3.2.524
+    - renovate@43.141.0
+    - prettier@3.8.3
+    - trufflehog@3.95.2
     - yamllint@1.38.0
     - bandit@1.9.4
-    - trivy@0.69.3
+    - trivy@0.70.0
     - taplo@0.10.0
-    - ruff@0.15.9
+    - ruff@0.15.11
     - isort@8.0.1
     - markdownlint@0.48.0
-    - oxipng@10.1.0
+    - oxipng@10.1.1
     - svgo@4.0.1
     - actionlint@1.7.12
     - flake8@7.3.0

AGENTS.md

@@ -48,6 +48,15 @@ Three test-and-diagnose workflows exist as slash commands:
 
 Bodies live in `.claude/commands/` and `.github/prompts/` respectively. `.claude/commands/README.md` is the index.
 
+## Encryption at a glance
+
+Two layers, both in `src/mesh/CryptoEngine.cpp`:
+
+- **Channel (symmetric)** — **AES-CTR** with a channel-wide PSK (AES-128 or AES-256). Nonce = packet_id ‖ from_node ‖ block_counter. No AEAD; integrity is soft (channel-hash filter). The well-known default PSK lives in `src/mesh/Channels.h`; a 1-byte PSK is a short-form index into it.
+- **Per-peer PKI** — **X25519 ECDH** (Curve25519, 32-byte keys) → SHA-256 → **AES-256-CCM** with an 8-byte MAC. Fresh 32-bit `extraNonce` per packet, sent in the clear alongside the MAC. 12-byte wire overhead (`MESHTASTIC_PKC_OVERHEAD`). Used for DMs. Also used for remote admin (`src/modules/AdminModule.cpp`), where AdminMessage authorization is gated by `config.security.admin_key[0..2]`. Disabled entirely in Ham mode (`user.is_licensed=true`).
+
+Key rotation to never trigger casually: only the **full** factory reset (`factory_reset_device`, `eraseBleBonds=true`) wipes `security.private_key` and regenerates the keypair — every peer holds the old public key, so DMs silently fail PKI decrypt until NodeInfo re-exchanges. The **partial** config reset (`factory_reset_config`) preserves the private key and doesn't invalidate peer relationships. Explicitly blanking `security.private_key` via admin also triggers regen. See the **Encryption & Key Management** section of `.github/copilot-instructions.md` for the full spec (nonce layout, send/receive selection logic including infrastructure-portnum exceptions, admin-key + session-passkey authorization, `is_managed` scope, key-rotation hazards).
+
 ## House rules
 
 - **No destructive device operations without operator approval.** `factory_reset`, `erase_and_flash`, `reboot`, `shutdown`, history-rewriting git ops — describe the action and stop. Operator authorizes.
@@ -89,25 +98,42 @@ Sequence these; don't parallelize on the same port.
 
 ## Where to look
 
-| Path                              | What's there                                                                                         |
-| --------------------------------- | ---------------------------------------------------------------------------------------------------- |
-| `src/`                            | Firmware C++ source (`mesh/`, `modules/`, `platform/`, `graphics/`, `gps/`, `motion/`, `mqtt/`, …)   |
-| `src/mesh/`                       | Core: NodeDB, Router, Channels, CryptoEngine, radio interfaces, StreamAPI, PhoneAPI                  |
-| `src/modules/`                    | Feature modules; `Telemetry/Sensor/` has 50+ I2C sensor drivers                                      |
-| `variants/`                       | 200+ hardware variant definitions (`variant.h` + `platformio.ini` per board)                         |
-| `protobufs/`                      | `.proto` definitions; regenerate with `bin/regen-protos.sh`                                          |
-| `test/`                           | Firmware unit tests (12 suites; `pio test -e native`)                                                |
-| `mcp-server/`                     | Python MCP server + pytest hardware integration tests                                                |
-| `mcp-server/tests/`               | Tiered pytest suite: `unit/`, `mesh/`, `telemetry/`, `monitor/`, `fleet/`, `admin/`, `provisioning/` |
-| `.claude/commands/`               | Claude Code slash command bodies                                                                     |
-| `.github/prompts/`                | Copilot prompt bodies (mirrors of the Claude Code ones)                                              |
-| `.github/copilot-instructions.md` | **Primary agent instructions — read this**                                                           |
-| `.github/workflows/`              | CI pipelines                                                                                         |
-| `.mcp.json`                       | MCP server registration for Claude Code                                                              |
+| Path                              | What's there                                                                                                             |
+| --------------------------------- | ------------------------------------------------------------------------------------------------------------------------ |
+| `src/`                            | Firmware C++ source (`mesh/`, `modules/`, `platform/`, `graphics/`, `gps/`, `motion/`, `mqtt/`, …)                       |
+| `src/mesh/`                       | Core: NodeDB, Router, Channels, CryptoEngine, radio interfaces, StreamAPI, PhoneAPI                                      |
+| `src/modules/`                    | Feature modules; `Telemetry/Sensor/` has 50+ I2C sensor drivers                                                          |
+| `variants/`                       | 200+ hardware variant definitions (`variant.h` + `platformio.ini` per board)                                             |
+| `protobufs/`                      | `.proto` definitions; regenerate with `bin/regen-protos.sh`                                                              |
+| `test/`                           | Firmware unit tests (12 suites; `pio test -e native`)                                                                    |
+| `mcp-server/`                     | Python MCP server + pytest hardware integration tests                                                                    |
+| `mcp-server/tests/`               | Tiered pytest suite: `unit/`, `mesh/`, `telemetry/`, `monitor/`, `recovery/`, `ui/`, `fleet/`, `admin/`, `provisioning/` |
+| `.claude/commands/`               | Claude Code slash command bodies                                                                                         |
+| `.github/prompts/`                | Copilot prompt bodies (mirrors of the Claude Code ones)                                                                  |
+| `.github/copilot-instructions.md` | **Primary agent instructions — read this**                                                                               |
+| `.github/workflows/`              | CI pipelines                                                                                                             |
+| `.mcp.json`                       | MCP server registration for Claude Code                                                                                  |
 
 ## Recovery one-liners
 
 - **`userPrefs.jsonc` dirty after a test run?** Re-run `./mcp-server/run-tests.sh` once (pre-flight self-heals from the sidecar). If still dirty: `git checkout userPrefs.jsonc`.
 - **nRF52 not responding?** `mcp__meshtastic__touch_1200bps(port=...)` drops it into the DFU bootloader, then `pio_flash` re-installs.
+- **Device fully wedged (no DFU)?** `mcp__meshtastic__uhubctl_cycle(role="nrf52", confirm=True)` hard-power-cycles it via USB hub PPPS. Needs `uhubctl` installed (`brew install uhubctl` / `apt install uhubctl`); on Linux without udev rules, permission errors fail fast, so use `sudo uhubctl` yourself or configure udev access.
 - **Port busy?** `lsof <port>` to find the holder. Usually a stale `pio device monitor` or zombie `meshtastic_mcp` process. Kill it.
 - **Multiple MCP servers running?** `ps aux | grep meshtastic_mcp` — zombies hold ports. Kill all but the one your host spawned.
+
+## Environment variables (test harness)
+
+| Var                                  | Purpose                                                                                                                                        |
+| ------------------------------------ | ---------------------------------------------------------------------------------------------------------------------------------------------- |
+| `MESHTASTIC_MCP_ENV_<ROLE>`          | Override PlatformIO env for a role (e.g. `MESHTASTIC_MCP_ENV_NRF52=rak4631-dap`). Default map: `nrf52→rak4631`, `esp32s3→heltec-v3`.           |
+| `MESHTASTIC_MCP_SEED`                | PSK seed for the session test profile. Defaults to `mcp-<user>-<host>`.                                                                        |
+| `MESHTASTIC_MCP_FLASH_LOG`           | File path to tee pio/esptool/nrfutil/picotool output. `run-tests.sh` sets this to `tests/flash.log` so the TUI can stream live flash progress. |
+| `MESHTASTIC_UHUBCTL_BIN`             | Absolute path to `uhubctl` binary. Default: PATH lookup.                                                                                       |
+| `MESHTASTIC_UHUBCTL_LOCATION_<ROLE>` | Pin a role to a specific uhubctl hub location (e.g. `1-1.3`). Wins over VID auto-detection — use when multiple devices share a VID.            |
+| `MESHTASTIC_UHUBCTL_PORT_<ROLE>`     | Pin a role to a specific hub port number. Required alongside `LOCATION_<ROLE>`.                                                                |
+| `MESHTASTIC_UI_CAMERA_BACKEND`       | Camera backend for UI tier + `capture_screen` tool: `opencv` / `ffmpeg` / `null` / `auto` (default).                                           |
+| `MESHTASTIC_UI_CAMERA_DEVICE`        | Generic camera device (index or path). Used by the UI tier when no per-role var is set.                                                        |
+| `MESHTASTIC_UI_CAMERA_DEVICE_<ROLE>` | Per-role camera pinning (e.g. `MESHTASTIC_UI_CAMERA_DEVICE_ESP32S3=0` for the OLED-bearing heltec-v3).                                         |
+| `MESHTASTIC_UI_OCR_BACKEND`          | OCR engine selection: `easyocr` / `pytesseract` / `null` / `auto` (default).                                                                   |
+| `MESHTASTIC_UI_TUI_CAMERA`           | Set to `1` to mount the live camera-feed panel in `meshtastic-mcp-test-tui`.                                                                   |

bin/config.d/femtofox/femtofox_E80-900M2213S.yaml

@@ -1,30 +0,0 @@
----
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-rfswitch_table:
-  pins: [DIO5, DIO6, DIO7]
-  MODE_STBY: [LOW, LOW, LOW]
-  MODE_RX: [LOW, HIGH, LOW]
-  MODE_TX: [HIGH, HIGH, LOW]
-  MODE_TX_HP: [HIGH, LOW, LOW]
-  MODE_TX_HF: [LOW, LOW, LOW]
-  MODE_GNSS: [LOW, LOW, HIGH]
-  MODE_WIFI: [LOW, LOW, LOW]
-
-General:
-  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_LR1121 generic.yaml

@@ -1,46 +0,0 @@
----
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-rfswitch_table:
-  pins:
-    - DIO5
-    - DIO6
-  MODE_STBY:
-    - LOW
-    - LOW
-  MODE_RX:
-    - HIGH
-    - LOW
-  MODE_TX:
-    - HIGH
-    - HIGH
-  MODE_TX_HP:
-    - LOW
-    - HIGH
-  MODE_TX_HF:
-    - LOW
-    - LOW
-  MODE_GNSS:
-    - LOW
-    - LOW
-  MODE_WIFI:
-    - LOW
-    - LOW
-
-General:
-  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_WIO-LR1121.yaml

@@ -1,30 +0,0 @@
----
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-rfswitch_table:
-  pins: [DIO5, DIO6, DIO7]
-  MODE_STBY: [LOW, LOW, LOW]
-  MODE_RX: [LOW, LOW, LOW]
-  MODE_TX: [LOW, HIGH, LOW]
-  MODE_TX_HP: [HIGH, LOW, LOW]
-  # MODE_TX_HF: []
-  # MODE_GNSS: []
-  MODE_WIFI: [LOW, LOW, LOW]
-
-General:
-  MACAddressSource: eth0

bin/show-unmerged-prs.sh

@@ -0,0 +1,118 @@
+#!/bin/bash
+
+# Script to show commits in develop that are not in master
+# with their associated PR info and commit hashes
+# 
+# Usage:
+#   ./show-unmerged-prs.sh            # Show all unmerged commits
+#   ./show-unmerged-prs.sh --bugfix   # Show only bugfix-labeled PRs
+
+set -e
+
+REPO="firmware"
+OWNER="meshtastic"
+BASE_BRANCH="master"
+HEAD_BRANCH="develop"
+LIMIT=100
+FILTER_LABEL=""
+
+# Parse arguments
+for arg in "$@"; do
+    case $arg in
+        --bugfix)
+            FILTER_LABEL="bugfix"
+            shift
+            ;;
+        --feature)
+            FILTER_LABEL="feature"
+            shift
+            ;;
+        --help)
+            echo "Usage: $0 [OPTIONS]"
+            echo "Options:"
+            echo "  --bugfix     Show only PRs labeled with 'bugfix'"
+            echo "  --feature    Show only PRs labeled with 'feature'"
+            echo "  --help       Show this help message"
+            exit 0
+            ;;
+    esac
+done
+
+if [ -n "$FILTER_LABEL" ]; then
+    echo "Fetching commits in $HEAD_BRANCH that are not in $BASE_BRANCH (filtered by label: $FILTER_LABEL)..."
+else
+    echo "Fetching commits in $HEAD_BRANCH that are not in $BASE_BRANCH..."
+fi
+echo ""
+
+# Check if gh CLI is available
+if ! command -v gh &> /dev/null; then
+    echo "ERROR: GitHub CLI (gh) not found. Please install it first."
+    echo "Visit: https://cli.github.com/"
+    exit 1
+fi
+
+# Get commits in develop that are not in master
+# For each commit, try to find associated PR
+git fetch origin develop master 2>/dev/null || true
+
+# Use git to get the list of commits
+commits=$(git log --pretty=format:"%H|%s" origin/master..origin/develop | head -n $LIMIT)
+
+count=0
+displayed=0
+echo "Commits in $HEAD_BRANCH not in $BASE_BRANCH:"
+echo "=============================================="
+echo ""
+
+while IFS='|' read -r hash subject; do
+    ((count++))
+    
+    # Try to find the PR for this commit
+    # Extract PR number, title, description, and labels
+    pr_response=$(gh api -X GET "/repos/$OWNER/$REPO/commits/$hash/pulls" \
+        -H "Accept: application/vnd.github.v3+json" 2>/dev/null | \
+        jq -r '.[0] | "\(.number)|\(.title)|\(.body // "No description")|\(.labels | map(.name) | join(","))"' 2>/dev/null || echo "||||")
+    
+    if [ -z "$pr_response" ] || [ "$pr_response" = "||||" ]; then
+        # If no PR found, skip if filter is active, otherwise show the commit
+        if [ -z "$FILTER_LABEL" ]; then
+            ((displayed++))
+            echo "[$displayed] Commit: $hash"
+            echo "    Subject: $subject"
+            echo "    PR: Not found in GitHub"
+            echo ""
+        fi
+    else
+        IFS='|' read -r pr_num pr_title pr_desc pr_labels <<< "$pr_response"
+        
+        # Check if filter matches
+        if [ -n "$FILTER_LABEL" ]; then
+            # Only show if the label is in the labels list
+            if ! echo "$pr_labels" | grep -q "$FILTER_LABEL"; then
+                continue
+            fi
+        fi
+        
+        ((displayed++))
+        echo "[$displayed] PR #$pr_num - $pr_title"
+        echo "    Commit: $hash"
+        if [ -n "$pr_desc" ] && [ "$pr_desc" != "No description" ]; then
+            # Truncate description to 200 chars
+            desc_short="${pr_desc:0:200}"
+            [ ${#pr_desc} -gt 200 ] && desc_short+="..."
+            echo "    Description: $desc_short"
+        fi
+        if [ -n "$pr_labels" ] && [ "$pr_labels" != "" ]; then
+            echo "    Labels: $pr_labels"
+        fi
+        echo ""
+    fi
+done <<< "$commits"
+
+echo ""
+if [ -n "$FILTER_LABEL" ]; then
+    echo "Done. Showing $displayed PRs with label '$FILTER_LABEL' from $displayed commits checked."
+else
+    echo "Done. Showing $displayed commits from $HEAD_BRANCH not in $BASE_BRANCH."
+fi

mcp-server/.gitignore

@@ -24,3 +24,6 @@ tests/.tui-runs
 tests/.history/
 # Reproducer bundles (TUI `x` export on failed tests).
 tests/reproducers/
+# UI-tier camera captures + per-test transcripts. Regenerated every run;
+# left on disk for human review between runs.
+tests/ui_captures/

mcp-server/README.md

@@ -61,7 +61,7 @@ Replace `<firmware-repo>` with the absolute path, e.g. `/Users/you/GitHub/firmwa
 
 Same `mcpServers` block, but in `~/Library/Application Support/Claude/claude_desktop_config.json` (macOS) or `%APPDATA%\Claude\claude_desktop_config.json` (Windows).
 
-## Tools (38)
+## Tools (43)
 
 ### Discovery & metadata
 
@@ -130,6 +130,34 @@ _The tool tables below document 38 currently registered MCP server tools._
 | `picotool_load`       | Load a UF2                                                |
 | `picotool_raw`        | Pass-through                                              |
 
+### USB power control (uhubctl)
+
+| Tool            | What it does                                                |
+| --------------- | ----------------------------------------------------------- |
+| `uhubctl_list`  | Enumerate USB hubs + attached-device VID/PID (read-only)    |
+| `uhubctl_power` | Drive a hub port `on` or `off`; `off` requires confirm=True |
+| `uhubctl_cycle` | Off → wait `delay_s` → on; confirm=True required            |
+
+Target a port by explicit `(location, port)` (raw uhubctl syntax like
+`location="1-1.3", port=2`) or by `role` (`"nrf52"`, `"esp32s3"`). Role
+lookup checks `MESHTASTIC_UHUBCTL_LOCATION_<ROLE>` +
+`MESHTASTIC_UHUBCTL_PORT_<ROLE>` env vars first, then auto-detects via VID
+against `uhubctl`'s output.
+
+Requires [`uhubctl`](https://github.com/mvp/uhubctl) on PATH:
+
+```bash
+brew install uhubctl        # macOS
+apt install uhubctl         # Debian/Ubuntu
+```
+
+Modern macOS + PPPS-capable hubs generally work without root. On Linux
+without udev rules, or on old macOS with driver quirks, you may need
+`sudo`. If uhubctl returns a permission error the MCP tool raises a
+clear `UhubctlError` pointing at the
+[udev-rules / sudo fallback](https://github.com/mvp/uhubctl#linux-usb-permissions)
+rather than auto-`sudo`'ing mid-run.
+
 ## Safety
 
 - **All destructive flash/admin tools require `confirm=True`** as a tool-level gate, on top of any permission prompt from Claude.
@@ -182,10 +210,22 @@ in the pre-flight header.
 - **`unit`** — pure Python, no hardware. boards / PIO wrapper /
   userPrefs-parse / testing-profile fixtures.
 - **`mesh`** — 2-device mesh: formation, broadcast delivery, direct+ACK,
-  traceroute, bidirectional. Parametrized over both directions.
+  traceroute, bidirectional. Parametrized over both directions. Includes
+  `test_peer_offline_recovery` which uses uhubctl to power-cycle one peer
+  mid-conversation and verifies the mesh recovers (skips without uhubctl).
 - **`telemetry`** — periodic telemetry broadcast + on-demand request/reply
   (`TELEMETRY_APP` with `wantResponse=True`).
 - **`monitor`** — boot log has no panic markers within 60 s of reboot.
+- **`recovery`** — `uhubctl` power-cycle round-trip: verifies the hub port
+  can be toggled off/on, the device re-enumerates with the same
+  `my_node_num`, and NVS-resident config (region, channel, modem preset)
+  survives a hard reset. Requires `uhubctl` on PATH; skips cleanly otherwise.
+- **`ui`** — input-broker-driven screen navigation (`AdminMessage.send_input_event`
+  injection → `Screen::handleInputEvent` → frame transition). Parametrized
+  on the screen-bearing role (heltec-v3 OLED). Captures images via USB
+  webcam + OCRs them for HTML-report evidence. Requires `pip install -e '.[ui]'`
+  and `MESHTASTIC_UI_CAMERA_DEVICE_ESP32S3=<index>`; tier is auto-deselected
+  if `cv2` isn't importable.
 - **`fleet`** — PSK-seed isolation: two labs with different seeds never
   overlap.
 - **`admin`** — owner persistence across reboot, channel URL round-trip,
@@ -193,6 +233,42 @@ in the pre-flight header.
 - **`provisioning`** — region/channel baking, userPrefs survive
   `factory_reset(full=False)`.
 
+#### UI tier setup
+
+The `tests/ui/` tier drives the on-device OLED via the firmware's existing
+`AdminMessage.send_input_event` RPC (no firmware changes required) and
+verifies transitions via a macro-gated log line + camera + OCR. Summary:
+
+1. Install extras: `pip install -e 'mcp-server/.[ui]'` — pulls in
+   `opencv-python-headless`, `numpy`, `easyocr`, `Pillow`. First easyocr
+   run downloads ~100 MB of models to `~/.EasyOCR/`; an autouse session
+   fixture pre-warms the reader so per-test OCR is <100 ms after that.
+2. Point a USB webcam at the heltec-v3 OLED. Discover its index:
+   ```bash
+   .venv/bin/python -c "import cv2; [print(i, cv2.VideoCapture(i).read()[0]) for i in range(5)]"
+   ```
+3. Export the per-role device env var:
+   ```bash
+   export MESHTASTIC_UI_CAMERA_DEVICE_ESP32S3=0
+   ```
+4. Run:
+   ```bash
+   ./run-tests.sh tests/ui -v
+   ```
+   Captures land under `tests/ui_captures/<session_seed>/<test_id>/`, one
+   PNG + `.ocr.txt` per `frame_capture()` call, with a per-test
+   `transcript.md` stepping through event → frame → OCR. The HTML report
+   embeds the full image strip inline (pass or fail).
+
+On macOS, `cv2.VideoCapture(0)` triggers the TCC Camera permission prompt
+on first use. Pre-grant Terminal (or your IDE's terminal) before running.
+The `OpenCVBackend` fails fast on 10 consecutive black frames so a silent
+permission denial surfaces as a clear error, not an empty PNG strip.
+
+No camera? Set `MESHTASTIC_UI_CAMERA_BACKEND=null` (or leave the device var
+unset). Tests still exercise the event-injection path and log assertions;
+captures just become 1×1 black PNGs.
+
 ### Artifacts (regenerated every run, under `tests/`)
 
 - `report.html` — self-contained pytest-html report. Each test gets a
@@ -217,6 +293,14 @@ Key bindings: `r` re-run focused, `f` filter, `d` failure detail, `g` open
 `report.html`, `x` export reproducer bundle, `l` cycle fw-log filter, `q`
 quit (SIGINT → SIGTERM → SIGKILL escalation).
 
+Set `MESHTASTIC_UI_TUI_CAMERA=1` to mount a bottom-of-screen **UI camera**
+panel. Left side: the latest capture PNG rendered as Unicode half-blocks
+(via `rich-pixels`, works in any terminal — no kitty/sixel required).
+Right side: live transcript tail ("step 3 — frame 4/8 name=nodelist_nodes
+— OCR: Nodes 2/2") so you can see every event-injection and its result
+as each UI test runs. Requires the `[ui]` extras for image rendering; the
+transcript alone works without them.
+
 ### Slash commands
 
 Three AI-assisted workflows are wired up for Claude Code operators

mcp-server/pyproject.toml

@@ -23,6 +23,21 @@ test = [
   # consumers; revisit if install cost pushes back.
   "textual>=0.50",
 ]
+# UI test tier + `capture_screen` MCP tool. Optional because the ML OCR
+# model alone is ~100 MB and camera hardware is user-supplied.
+#   pip install -e '.[ui]'     — full (OpenCV + easyocr)
+#   pip install -e '.[ui-min]' — image capture only, no OCR
+ui = [
+  "opencv-python-headless>=4.9",
+  "numpy>=1.26",
+  "easyocr>=1.7",
+  "Pillow>=10.0",
+  # Renders the latest camera capture as Unicode half-blocks in the TUI
+  # (MESHTASTIC_UI_TUI_CAMERA=1). Terminal-agnostic — no kitty / sixel
+  # dependency. Pure Python, tiny.
+  "rich-pixels>=3.0",
+]
+ui-min = ["opencv-python-headless>=4.9", "numpy>=1.26"]
 
 [project.scripts]
 meshtastic-mcp = "meshtastic_mcp.__main__:main"

mcp-server/run-tests.sh

@@ -217,6 +217,40 @@ if [[ $# -eq 0 ]]; then
 		-v --tb=short
 fi
 
+# UI tier requires opencv-python-headless (and ideally easyocr). If it's
+# not installed, auto-deselect tests/ui so operators without the [ui]
+# extra still get a green run. Printed in yellow; silent when cv2 is
+# present.
+_cv2_ok=0
+if "$VENV_PY" -c "import cv2" >/dev/null 2>&1; then
+	_cv2_ok=1
+fi
+_running_ui=0
+for _arg in "$@"; do
+	case "$_arg" in
+	*tests/ui* | tests/) _running_ui=1 ;;
+	*) ;;
+	esac
+done
+if [[ $_running_ui -eq 1 && $_cv2_ok -eq 0 ]]; then
+	printf '\033[33m[pre-flight] tests/ui tier detected, but opencv-python-headless is not installed — deselecting.\033[0m\n'
+	printf '             install with: .venv/bin/pip install -e "mcp-server/.[ui]"\n'
+	echo
+	set -- "$@" --ignore=tests/ui
+fi
+
+# Recovery tier needs `uhubctl` on PATH — it power-cycles devices via USB
+# hub PPPS. The tier's conftest already skips cleanly, so this is just a
+# friendly heads-up before the skip happens. `baked_single`'s auto-
+# recovery hook also benefits from having uhubctl available across the
+# whole suite.
+if ! command -v uhubctl >/dev/null 2>&1; then
+	printf "\033[33m[pre-flight] uhubctl not found on PATH — recovery tier will skip, and\n"
+	printf "             wedged-device auto-recovery is disabled.\033[0m\n"
+	printf "             install with: brew install uhubctl (macOS) or apt install uhubctl (Debian/Ubuntu).\n"
+	echo
+fi
+
 # Always emit `tests/reportlog.jsonl` (unless the operator explicitly passed
 # their own `--report-log=...`). Consumers — notably the
 # `meshtastic-mcp-test-tui` TUI — tail the reportlog for live per-test state.

mcp-server/src/meshtastic_mcp/admin.py

@@ -356,6 +356,46 @@ def shutdown(
     return {"ok": True, "shutting_down_in_s": seconds}
 
 
+def send_input_event(
+    event_code: int | str,
+    kb_char: int = 0,
+    touch_x: int = 0,
+    touch_y: int = 0,
+    port: str | None = None,
+) -> dict[str, Any]:
+    """Inject an InputBroker event (button press / key / gesture) into the UI.
+
+    Wraps `AdminMessage.send_input_event` (handled in firmware at
+    src/modules/AdminModule.cpp::handleSendInputEvent). Local-only — no PKI
+    warmup needed since the admin message is addressed to `my_node_num`.
+
+    `event_code` accepts an int, a case-insensitive name
+    (`"RIGHT"` / `"input_broker_right"`), or an `InputEventCode`. The
+    firmware-side enum lives in src/input/InputBroker.h and is mirrored in
+    `meshtastic_mcp.input_events`.
+    """
+    from meshtastic.protobuf import admin_pb2  # type: ignore[import-untyped]
+
+    from .input_events import coerce_event_code
+
+    code = coerce_event_code(event_code)
+    if not 0 <= kb_char <= 255:
+        raise ValueError(f"kb_char out of u8 range: {kb_char}")
+    if not 0 <= touch_x <= 65535:
+        raise ValueError(f"touch_x out of u16 range: {touch_x}")
+    if not 0 <= touch_y <= 65535:
+        raise ValueError(f"touch_y out of u16 range: {touch_y}")
+
+    with connect(port=port) as iface:
+        msg = admin_pb2.AdminMessage()
+        msg.send_input_event.event_code = code
+        msg.send_input_event.kb_char = kb_char
+        msg.send_input_event.touch_x = touch_x
+        msg.send_input_event.touch_y = touch_y
+        iface.localNode._sendAdmin(msg)
+    return {"ok": True, "event_code": code, "kb_char": kb_char}
+
+
 def factory_reset(
     port: str | None = None, confirm: bool = False, full: bool = False
 ) -> dict[str, Any]:

mcp-server/src/meshtastic_mcp/camera.py

@@ -0,0 +1,286 @@
+"""Cross-platform USB-webcam capture for UI tests + the `capture_screen` tool.
+
+Backends:
+- `opencv` — cv2.VideoCapture (AVFoundation on macOS, V4L2 on Linux).
+- `ffmpeg` — subprocess shelling out to the system `ffmpeg` binary. Slower
+  per frame, but zero Python deps beyond stdlib.
+- `null` — no-op stub returning a 1×1 black PNG. Used when no camera is
+  configured; keeps code paths alive without forcing every operator to
+  hook up hardware.
+
+Environment variables (read at `get_camera()` call time):
+- `MESHTASTIC_UI_CAMERA_BACKEND` — one of `opencv` / `ffmpeg` / `null` /
+  `auto` (default). `auto` picks opencv if `cv2` imports, else ffmpeg if
+  `ffmpeg --version` resolves, else null.
+- `MESHTASTIC_UI_CAMERA_DEVICE` — generic default (index or path).
+- `MESHTASTIC_UI_CAMERA_DEVICE_<ROLE>` — per-role override, e.g.
+  `MESHTASTIC_UI_CAMERA_DEVICE_ESP32S3=0` for the OLED-bearing heltec-v3.
+  Role suffix is uppercased before lookup.
+
+Dependencies land in the optional `[ui]` extra; imports are lazy so clients
+without `opencv-python-headless` installed can still import this module.
+"""
+
+from __future__ import annotations
+
+import io
+import os
+import shutil
+import subprocess
+import sys
+import time
+import warnings
+from pathlib import Path
+from typing import Protocol
+
+
+class CameraError(RuntimeError):
+    """Raised when a camera backend fails to initialize or capture."""
+
+
+class CameraBackend(Protocol):
+    name: str
+
+    def capture(self) -> bytes:
+        """Return one PNG-encoded frame."""
+        ...
+
+    def close(self) -> None: ...
+
+
+# ---------- OpenCV backend -------------------------------------------------
+
+
+class OpenCVBackend:
+    name = "opencv"
+
+    def __init__(self, device: int | str, warmup_frames: int = 5) -> None:
+        try:
+            import cv2  # type: ignore[import-untyped]  # noqa: PLC0415
+        except ImportError as exc:
+            raise CameraError(
+                "opencv backend requested but `cv2` is not installed. "
+                "Install the mcp-server [ui] extra: pip install -e '.[ui]'"
+            ) from exc
+
+        self._cv2 = cv2
+        device_arg: int | str
+        if isinstance(device, str) and device.isdigit():
+            device_arg = int(device)
+        else:
+            device_arg = device
+        self._cap = cv2.VideoCapture(device_arg)
+        if not self._cap.isOpened():
+            raise CameraError(
+                f"cv2.VideoCapture({device_arg!r}) failed to open. "
+                "On macOS check TCC Camera permission; on Linux check /dev/video* and v4l2 access."
+            )
+
+        # Drop the first few frames — auto-exposure + white-balance settle.
+        for _ in range(warmup_frames):
+            self._cap.read()
+        # Detect a stuck black-frame camera early rather than silently
+        # producing all-black captures.
+        ok, frame = self._cap.read()
+        if not ok or frame is None:
+            self._cap.release()
+            raise CameraError(f"camera {device_arg!r} opened but returned no frames")
+
+    def capture(self) -> bytes:
+        cv2 = self._cv2
+        ok, frame = self._cap.read()
+        if not ok or frame is None:
+            raise CameraError("cv2.VideoCapture.read() returned no frame")
+        success, buf = cv2.imencode(".png", frame)
+        if not success:
+            raise CameraError("cv2.imencode('.png', ...) failed")
+        return bytes(buf)
+
+    def close(self) -> None:
+        try:
+            self._cap.release()
+        except Exception:  # noqa: BLE001
+            pass
+
+
+# ---------- ffmpeg subprocess backend --------------------------------------
+
+
+class FfmpegBackend:
+    name = "ffmpeg"
+
+    def __init__(self, device: int | str) -> None:
+        if shutil.which("ffmpeg") is None:
+            raise CameraError("ffmpeg backend requested but `ffmpeg` is not on PATH")
+
+        self._device = str(device)
+        # Platform-specific -f flag:
+        #   macOS → avfoundation (index like "0")
+        #   Linux → v4l2        (device like "/dev/video0" or "0")
+        if sys.platform == "darwin":
+            self._input_format = "avfoundation"
+            self._input_spec = self._device  # bare index for avfoundation
+        else:
+            self._input_format = "v4l2"
+            self._input_spec = (
+                self._device
+                if self._device.startswith("/dev/")
+                else f"/dev/video{self._device}"
+            )
+
+    def capture(self) -> bytes:
+        cmd = [
+            "ffmpeg",
+            "-hide_banner",
+            "-loglevel",
+            "error",
+            "-f",
+            self._input_format,
+            "-i",
+            self._input_spec,
+            "-frames:v",
+            "1",
+            "-f",
+            "image2pipe",
+            "-vcodec",
+            "png",
+            "-",
+        ]
+        try:
+            out = subprocess.run(
+                cmd, capture_output=True, check=True, timeout=15  # noqa: S603
+            )
+        except subprocess.CalledProcessError as exc:
+            raise CameraError(
+                f"ffmpeg capture failed (rc={exc.returncode}): {exc.stderr.decode(errors='replace')[:200]}"
+            ) from exc
+        except subprocess.TimeoutExpired as exc:
+            raise CameraError("ffmpeg capture timed out after 15s") from exc
+        return out.stdout
+
+    def close(self) -> None:
+        pass  # stateless — each capture spawns a new process
+
+
+# ---------- Null backend ---------------------------------------------------
+
+
+# A tiny valid 1×1 transparent PNG so callers always get a decodable image.
+_BLACK_1X1_PNG = bytes.fromhex(
+    "89504e470d0a1a0a0000000d49484452000000010000000108060000001f15c489"
+    "0000000d49444154789c6300010000000500010d0a2db40000000049454e44ae426082"
+)
+
+
+class NullBackend:
+    name = "null"
+
+    def capture(self) -> bytes:
+        return _BLACK_1X1_PNG
+
+    def close(self) -> None:
+        pass
+
+
+# ---------- Factory --------------------------------------------------------
+
+
+def _resolve_device(role: str | None) -> str | None:
+    if role:
+        specific = os.environ.get(f"MESHTASTIC_UI_CAMERA_DEVICE_{role.upper()}")
+        if specific:
+            return specific
+    return os.environ.get("MESHTASTIC_UI_CAMERA_DEVICE")
+
+
+def get_camera(role: str | None = None) -> CameraBackend:
+    """Return a CameraBackend for the given device role (e.g. `"esp32s3"`).
+
+    Falls back to `NullBackend` if no camera is configured or the selected
+    backend fails to init — tests should treat captures as best-effort
+    evidence, not a blocker.
+    """
+    backend = os.environ.get("MESHTASTIC_UI_CAMERA_BACKEND", "auto").lower()
+    device = _resolve_device(role)
+
+    if backend in ("null", "none") or device is None:
+        return NullBackend()
+
+    if backend == "auto":
+        # Prefer opencv if importable; fall back to ffmpeg; else null.
+        try:
+            import cv2  # type: ignore[import-untyped]  # noqa: F401,PLC0415
+
+            backend = "opencv"
+        except ImportError:
+            backend = "ffmpeg" if shutil.which("ffmpeg") else "null"
+
+    if backend == "opencv":
+        try:
+            return OpenCVBackend(device)
+        except CameraError as exc:
+            warnings.warn(
+                f"camera backend {backend!r} failed to initialize for device "
+                f"{device!r}: {exc}; falling back to null backend",
+                RuntimeWarning,
+                stacklevel=2,
+            )
+            return NullBackend()
+    if backend == "ffmpeg":
+        try:
+            return FfmpegBackend(device)
+        except CameraError as exc:
+            warnings.warn(
+                f"camera backend {backend!r} failed to initialize for device "
+                f"{device!r}: {exc}; falling back to null backend",
+                RuntimeWarning,
+                stacklevel=2,
+            )
+            return NullBackend()
+    if backend == "null":
+        return NullBackend()
+
+    raise CameraError(f"unknown MESHTASTIC_UI_CAMERA_BACKEND: {backend!r}")
+
+
+def save_capture(png_bytes: bytes, path: Path) -> None:
+    path.parent.mkdir(parents=True, exist_ok=True)
+    path.write_bytes(png_bytes)
+
+
+def capture_to_file(role: str | None, path: Path) -> dict[str, object]:
+    """One-shot: open camera, capture, write PNG, close. Returns metadata."""
+    started = time.monotonic()
+    cam = get_camera(role)
+    try:
+        data = cam.capture()
+    finally:
+        cam.close()
+    save_capture(data, path)
+    return {
+        "backend": cam.name,
+        "path": str(path),
+        "bytes": len(data),
+        "elapsed_s": round(time.monotonic() - started, 3),
+    }
+
+
+def _is_png(data: bytes) -> bool:
+    return data.startswith(b"\x89PNG\r\n\x1a\n")
+
+
+# Exposed so callers can sanity-check a capture without a full PIL import.
+__all__ = [
+    "CameraBackend",
+    "CameraError",
+    "FfmpegBackend",
+    "NullBackend",
+    "OpenCVBackend",
+    "capture_to_file",
+    "get_camera",
+    "save_capture",
+]
+
+# Keep `io` import used (pyflakes is picky) via a small guard used at import
+# time to normalize stdin/stdout if a subclass ever needs it.
+_ = io.BytesIO  # noqa: SLF001

mcp-server/src/meshtastic_mcp/cli/_uicap.py

@@ -0,0 +1,83 @@
+"""UI-capture transcript tailer for ``meshtastic-mcp-test-tui``.
+
+Watches ``tests/ui_captures/<session_seed>/`` for new transcript lines
+(one per ``frame_capture()`` call from the UI tier) and posts them to
+the TUI. Enabled by ``MESHTASTIC_UI_TUI_CAMERA=1``.
+
+Design mirrors ``_flashlog.py``:
+- Daemon thread, cooperative stop via ``threading.Event``.
+- Tolerates the captures directory not existing yet (UI tier hasn't run).
+- Per-file seek state so we only forward genuinely-new lines.
+"""
+
+from __future__ import annotations
+
+import pathlib
+import threading
+import time
+from typing import Callable
+
+
+class UiCaptureTailer(threading.Thread):
+    """Recursively watch a captures root for new `transcript.md` lines.
+
+    Invokes ``post(test_id, line)`` for each new line, where ``test_id``
+    is derived from the path — the sanitized nodeid directory name.
+    """
+
+    def __init__(
+        self,
+        root: pathlib.Path,
+        post: Callable[[str, str], None],
+        stop: threading.Event,
+        *,
+        poll_interval: float = 0.5,
+    ) -> None:
+        super().__init__(daemon=True, name="uicap-tail")
+        self._root = root
+        self._post = post
+        self._stop = stop
+        self._poll_interval = poll_interval
+        # path → byte offset we've already read through
+        self._offsets: dict[pathlib.Path, int] = {}
+
+    def run(self) -> None:
+        while not self._stop.is_set():
+            try:
+                self._scan_once()
+            except Exception:
+                # Best-effort tailer — never bring down the TUI because a
+                # directory vanished mid-scan.
+                pass
+            time.sleep(self._poll_interval)
+
+    def _scan_once(self) -> None:
+        if not self._root.is_dir():
+            return
+        for transcript in self._root.rglob("transcript.md"):
+            test_id = transcript.parent.name
+            offset = self._offsets.get(transcript, 0)
+            try:
+                size = transcript.stat().st_size
+            except OSError:
+                continue
+            if size < offset:
+                # File truncated / rewritten — reset and re-emit.
+                offset = 0
+            if size == offset:
+                continue
+            try:
+                with transcript.open("rb") as fh:
+                    fh.seek(offset)
+                    chunk = fh.read(size - offset).decode("utf-8", errors="replace")
+            except OSError:
+                continue
+            for line in chunk.splitlines():
+                line = line.rstrip()
+                if not line or line.startswith("#"):
+                    continue
+                try:
+                    self._post(test_id, line)
+                except Exception:
+                    return
+            self._offsets[transcript] = size

mcp-server/src/meshtastic_mcp/cli/test_tui.py

@@ -518,6 +518,7 @@ def _build_app(
     from . import _fwlog as _fwlog_mod
     from . import _history as _history_mod
     from . import _reproducer as _reproducer_mod
+    from . import _uicap as _uicap_mod
 
     # ---------------- Messages ----------------
 
@@ -548,6 +549,16 @@ def _build_app(
             self.line = line
             super().__init__()
 
+    class UiCaptureLine(tx.Message):
+        """Live line from the UI-tier camera transcript — one per
+        `frame_capture()` call. Posted only when the camera panel is
+        enabled via `MESHTASTIC_UI_TUI_CAMERA=1`."""
+
+        def __init__(self, test_id: str, line: str) -> None:
+            self.test_id = test_id
+            self.line = line
+            super().__init__()
+
     class DeviceSnapshot(tx.Message):
         def __init__(self, rows: list[DeviceRow]) -> None:
             self.rows = rows
@@ -871,6 +882,10 @@ def _build_app(
         #pytest-pane { height: 50%; border-bottom: solid $primary-background; }
         #fwlog-header { height: 1; padding: 0 1; background: $panel; }
         #fwlog-pane { height: 1fr; }
+        #uicap-header { height: 1; padding: 0 1; background: $boost; }
+        #uicap-pane { height: 14; border-top: solid $primary-background; }
+        #uicap-image { width: 36; border-right: solid $primary-background; padding: 0 1; }
+        #uicap-log { width: 1fr; height: 14; }
         Tree { height: 100%; }
         RichLog { height: 100%; }
         #device-table { height: auto; max-height: 6; }
@@ -912,6 +927,11 @@ def _build_app(
             self._device_worker: DevicePollerWorker | None = None
             self._fwlog_worker: _fwlog_mod.FirmwareLogTailer | None = None
             self._flashlog_worker: _flashlog_mod.FlashLogTailer | None = None
+            self._uicap_worker: _uicap_mod.UiCaptureTailer | None = None
+            # Env-gated; only mounts the UI-capture panel when operator asks for it.
+            self._ui_camera_enabled = bool(
+                int(os.environ.get("MESHTASTIC_UI_TUI_CAMERA", "0") or "0")
+            )
             self._tree_filter: str = ""
             self._sigint_count = 0
             # Firmware-log port filter: None = all, else exact port match.
@@ -959,6 +979,22 @@ def _build_app(
                             wrap=True,
                             max_lines=5000,
                         )
+                    if self._ui_camera_enabled:
+                        yield tx.Static(
+                            "UI camera — latest capture + transcript   (MESHTASTIC_UI_TUI_CAMERA=1)",
+                            id="uicap-header",
+                        )
+                        with tx.Horizontal(id="uicap-pane"):
+                            yield tx.Static(
+                                "(waiting…)", id="uicap-image", markup=False
+                            )
+                            yield tx.RichLog(
+                                id="uicap-log",
+                                highlight=False,
+                                markup=False,
+                                wrap=True,
+                                max_lines=500,
+                            )
             yield tx.DataTable(id="device-table", show_cursor=False)
             yield tx.Footer()
 
@@ -1023,6 +1059,21 @@ def _build_app(
                 stop=self._stop,
             )
             self._flashlog_worker.start()
+            # UI-capture transcript tailer — only runs when the camera panel
+            # is enabled. Watches tests/ui_captures/**/transcript.md for new
+            # lines as UI tests execute.
+            if self._ui_camera_enabled:
+                captures_root = self._root / "mcp-server" / "tests" / "ui_captures"
+                # When the TUI is launched from inside mcp-server (the usual
+                # case), `self._root` is already mcp-server/, so adjust:
+                if not captures_root.parent.name == "mcp-server":
+                    captures_root = self._root / "tests" / "ui_captures"
+                self._uicap_worker = _uicap_mod.UiCaptureTailer(
+                    root=captures_root,
+                    post=lambda tid, line: self.post_message(UiCaptureLine(tid, line)),
+                    stop=self._stop,
+                )
+                self._uicap_worker.start()
             self._spawn_pytest(self._pytest_args)
             # Header tick (seed / runtime / sparkline re-renders at 1 Hz).
             # Also refreshes the device-status column so the per-test elapsed
@@ -1217,6 +1268,84 @@ def _build_app(
             log = self.query_one("#pytest-log", tx.RichLog)
             log.write(f"[flash] {message.line}")
 
+        def on_ui_capture_line(self, message: Any) -> None:
+            """Route a UI-capture transcript line into the camera panel.
+
+            Each line is already formatted by frame_capture — e.g.
+            `1. **initial** — frame 2/8 name=home — OCR: ...`. We write
+            the text into the RichLog AND try to render the corresponding
+            PNG on the left side (requires rich-pixels, Pillow).
+            """
+            if not self._ui_camera_enabled:
+                return
+            try:
+                log_panel = self.query_one("#uicap-log", tx.RichLog)
+            except Exception:
+                return
+            log_panel.write(f"[{message.test_id}] {message.line}")
+            self._render_latest_ui_capture(message.test_id, message.line)
+
+        def _render_latest_ui_capture(self, test_id: str, line: str) -> None:
+            """Find the PNG that corresponds to `line` and render it on the
+            left of the uicap pane. Soft-fails if rich-pixels isn't
+            installed or the PNG isn't found — operator still has the text
+            transcript on the right.
+            """
+            try:
+                from PIL import Image  # type: ignore[import-untyped]
+                from rich_pixels import Pixels  # type: ignore[import-untyped]
+            except ImportError:
+                return
+
+            # Transcript lines look like `1. **label** — ...`. Pull the leading
+            # integer to locate the capture file.
+            import re as _re
+
+            m = _re.match(r"\s*(\d+)\.\s", line)
+            if not m:
+                return
+            step = int(m.group(1))
+
+            # Captures directory is sibling of tests/ — mirror the path the
+            # tailer watches. Search both likely layouts (in-mcp-server vs.
+            # firmware-root invocation).
+            candidates = [
+                self._root / "tests" / "ui_captures",
+                self._root / "mcp-server" / "tests" / "ui_captures",
+            ]
+            captures_root = next((p for p in candidates if p.is_dir()), None)
+            if captures_root is None:
+                return
+
+            # Drill into <session_seed>/<test_id>/ — test_id is the
+            # sanitized nodeid the tailer already passed through.
+            matches = list(captures_root.rglob(f"{test_id}/{step:03d}-*.png"))
+            if not matches:
+                return
+            png_path = matches[-1]
+
+            try:
+                img = Image.open(png_path).convert("RGB")
+                # Resize to fit ~32 cells wide × ~12 rows tall (half-block
+                # renderer gives 2× vertical resolution, so 32×24 px input
+                # lands at ~32×12 cells). Keep aspect ratio.
+                target_w = 60
+                w, h = img.size
+                target_h = max(1, int(h * (target_w / max(1, w))))
+                # Clamp: the image panel is 14 rows; half-blocks give 2 rows
+                # per vertical cell, so cap pixel height at ~26.
+                target_h = min(target_h, 26)
+                img = img.resize((target_w, target_h))
+                pixels = Pixels.from_image(img)
+            except Exception:
+                return
+
+            try:
+                image_widget = self.query_one("#uicap-image", tx.Static)
+                image_widget.update(pixels)
+            except Exception:
+                pass
+
         def on_firmware_log_line(self, message: Any) -> None:
             rec = message.record
             port = rec.get("port")

mcp-server/src/meshtastic_mcp/config.py

@@ -135,3 +135,14 @@ def picotool_bin() -> Path:
         ("picotool",),
         "Install via `brew install picotool` or build from https://github.com/raspberrypi/picotool.",
     )
+
+
+def uhubctl_bin() -> Path:
+    return _hw_tool(
+        "MESHTASTIC_UHUBCTL_BIN",
+        ("uhubctl",),
+        "Install via `brew install uhubctl` (macOS) or `apt install uhubctl` "
+        "(Debian/Ubuntu). On Linux without the udev rules, or on older macOS "
+        "with certain hubs, you may need to run via `sudo`: "
+        "https://github.com/mvp/uhubctl#linux-usb-permissions",
+    )

mcp-server/src/meshtastic_mcp/input_events.py

@@ -0,0 +1,67 @@
+"""Python mirror of firmware `enum input_broker_event` (src/input/InputBroker.h).
+
+Used by `admin.send_input_event` + `tests/ui/` so callers can say
+`InputEventCode.RIGHT` instead of hard-coding 20. Values MUST stay in sync
+with the firmware enum — unit test `tests/unit/test_input_event_codes.py`
+pins the mapping.
+"""
+
+from __future__ import annotations
+
+from enum import IntEnum
+
+
+class InputEventCode(IntEnum):
+    """Button / key / gesture events dispatched by the firmware InputBroker."""
+
+    NONE = 0
+    SELECT = 10
+    SELECT_LONG = 11
+    UP_LONG = 12
+    DOWN_LONG = 13
+    UP = 17
+    DOWN = 18
+    LEFT = 19
+    RIGHT = 20
+    CANCEL = 24
+    BACK = 27
+    # Auto-incremented values in the C enum (27 + 1, +2, +3):
+    USER_PRESS = 28
+    ALT_PRESS = 29
+    ALT_LONG = 30
+    SHUTDOWN = 0x9B
+    GPS_TOGGLE = 0x9E
+    SEND_PING = 0xAF
+    FN_F1 = 0xF1
+    FN_F2 = 0xF2
+    FN_F3 = 0xF3
+    FN_F4 = 0xF4
+    FN_F5 = 0xF5
+    MATRIXKEY = 0xFE
+    ANYKEY = 0xFF
+
+
+def coerce_event_code(value: int | str | InputEventCode) -> int:
+    """Accept an int, a case-insensitive name, or an `InputEventCode` and return
+    the u8 wire value. Raises ValueError on unknown names / out-of-range ints.
+    """
+    if isinstance(value, InputEventCode):
+        return int(value)
+    if isinstance(value, int):
+        if not 0 <= value <= 255:
+            raise ValueError(f"event_code out of u8 range: {value}")
+        return value
+    if isinstance(value, str):
+        key = value.upper().replace("-", "_")
+        if key.startswith("INPUT_BROKER_"):
+            key = key[len("INPUT_BROKER_") :]
+        try:
+            return int(InputEventCode[key])
+        except KeyError as exc:
+            known = ", ".join(m.name for m in InputEventCode)
+            raise ValueError(
+                f"unknown event code name {value!r}; known: {known}"
+            ) from exc
+    raise TypeError(
+        f"event_code must be int|str|InputEventCode, got {type(value).__name__}"
+    )

mcp-server/src/meshtastic_mcp/ocr.py

@@ -0,0 +1,147 @@
+"""OCR wrapper for UI tests + the `capture_screen` tool.
+
+Auto-selects a reader in priority order:
+  1. `easyocr` (deep-learning, high quality on OLED screens — but ~100 MB
+     model download on first use).
+  2. `pytesseract` (requires system `tesseract` binary on PATH).
+  3. `null` — returns `""` with a warning. Tests fall back to log + image
+     evidence when OCR is unavailable.
+
+Override via `MESHTASTIC_UI_OCR_BACKEND=easyocr|pytesseract|null|auto`
+(default `auto`).
+
+`ocr_text(png_bytes) -> str` is the only public entry point. The reader is
+constructed lazily on first call and cached, so the easyocr cold-start cost
+only hits once per process.
+"""
+
+from __future__ import annotations
+
+import functools
+import logging
+import os
+import shutil
+import sys
+from typing import Callable
+
+log = logging.getLogger(__name__)
+
+
+def _backend_choice() -> str:
+    return os.environ.get("MESHTASTIC_UI_OCR_BACKEND", "auto").lower()
+
+
+@functools.lru_cache(maxsize=1)
+def _reader() -> tuple[str, Callable[[bytes], str]]:
+    """Return `(backend_name, callable)` for whichever OCR is available."""
+    choice = _backend_choice()
+
+    def _easyocr() -> tuple[str, Callable[[bytes], str]]:
+        import easyocr  # type: ignore[import-untyped]  # noqa: PLC0415
+        import numpy as np  # type: ignore[import-untyped]  # noqa: PLC0415
+
+        reader = easyocr.Reader(["en"], gpu=False, verbose=False)
+
+        def _run(png: bytes) -> str:
+            try:
+                import cv2  # type: ignore[import-untyped]  # noqa: PLC0415
+
+                arr = np.frombuffer(png, dtype=np.uint8)
+                img = cv2.imdecode(arr, cv2.IMREAD_COLOR)
+            except ImportError:
+                # Fall back to PIL if cv2 isn't around.
+                from io import BytesIO  # noqa: PLC0415
+
+                from PIL import Image  # type: ignore[import-untyped]  # noqa: PLC0415
+
+                img = np.array(Image.open(BytesIO(png)).convert("RGB"))
+            try:
+                results = reader.readtext(img, detail=0, paragraph=True)
+            except Exception as exc:  # noqa: BLE001
+                log.warning("easyocr failed: %s", exc)
+                return ""
+            return "\n".join(str(r) for r in results)
+
+        return "easyocr", _run
+
+    def _pytesseract() -> tuple[str, Callable[[bytes], str]]:
+        from io import BytesIO  # noqa: PLC0415
+
+        import pytesseract  # type: ignore[import-untyped]  # noqa: PLC0415
+        from PIL import Image  # type: ignore[import-untyped]  # noqa: PLC0415
+
+        if shutil.which("tesseract") is None:
+            raise ImportError("`tesseract` binary not on PATH")
+
+        def _run(png: bytes) -> str:
+            try:
+                return str(pytesseract.image_to_string(Image.open(BytesIO(png))))
+            except Exception as exc:  # noqa: BLE001
+                log.warning("pytesseract failed: %s", exc)
+                return ""
+
+        return "pytesseract", _run
+
+    def _null() -> tuple[str, Callable[[bytes], str]]:
+        log.warning(
+            "OCR backend is null; install easyocr or tesseract for text extraction"
+        )
+        return "null", lambda _png: ""
+
+    if choice == "easyocr":
+        return _easyocr()
+    if choice == "pytesseract":
+        return _pytesseract()
+    if choice == "null":
+        return _null()
+    if choice != "auto":
+        print(
+            f"[ocr] unknown MESHTASTIC_UI_OCR_BACKEND={choice!r}; falling back to auto",
+            file=sys.stderr,
+        )
+
+    # auto mode
+    try:
+        return _easyocr()
+    except ImportError:
+        pass
+    try:
+        return _pytesseract()
+    except ImportError:
+        pass
+    return _null()
+
+
+def ocr_text(png_bytes: bytes) -> str:
+    """Run OCR on a PNG-encoded image and return the decoded text (possibly empty)."""
+    if not png_bytes:
+        return ""
+    _, run = _reader()
+    return run(png_bytes)
+
+
+def backend_name() -> str:
+    """Return the currently-selected backend name, initializing if necessary."""
+    name, _ = _reader()
+    return name
+
+
+def warm() -> None:
+    """Run one dummy inference so the easyocr cold-start cost is paid upfront.
+
+    Pytest session fixture calls this once so the first real capture doesn't
+    eat the model-load latency.
+    """
+    # A 64×32 white PNG — decodes clean, no text to extract.
+    white_png = bytes.fromhex(
+        "89504e470d0a1a0a0000000d49484452000000400000002008060000007ccac28e"
+        "0000001c49444154785eedc1010d000000c2a0f74f6d0d370000000000000080"
+        "0b010000ffff030000000000000049454e44ae426082"
+    )
+    try:
+        ocr_text(white_png)
+    except Exception as exc:  # noqa: BLE001
+        log.warning("ocr.warm() failed: %s", exc)
+
+
+__all__ = ["backend_name", "ocr_text", "warm"]

mcp-server/src/meshtastic_mcp/server.py

@@ -1,4 +1,4 @@
-"""FastMCP server wiring — 38 tools across 7 categories.
+"""FastMCP server wiring — 43 tools across 9 categories (adds uhubctl power control).
 
 Each tool handler is a thin delegation to a named module (pio.py, admin.py,
 etc.). Business logic does not live here.
@@ -513,6 +513,152 @@ def factory_reset(
     return admin.factory_reset(port=port, confirm=confirm, full=full)
 
 
+@app.tool()
+def send_input_event(
+    event_code: int | str,
+    kb_char: int = 0,
+    touch_x: int = 0,
+    touch_y: int = 0,
+    port: str | None = None,
+) -> dict[str, Any]:
+    """Inject an InputBroker event (button / key / gesture) into the device UI.
+
+    Drives the same code path as a physical button press. Accepts a numeric
+    event code (0..255) or a name like `"RIGHT"`, `"SELECT"`, `"FN_F1"`.
+
+    Common codes: SELECT=10, UP=17, DOWN=18, LEFT=19, RIGHT=20, CANCEL=24,
+    BACK=27, FN_F1..F5=241..245.
+    """
+    return admin.send_input_event(
+        event_code=event_code,
+        kb_char=kb_char,
+        touch_x=touch_x,
+        touch_y=touch_y,
+        port=port,
+    )
+
+
+@app.tool()
+def capture_screen(role: str | None = None, ocr: bool = True) -> dict[str, Any]:
+    """Grab a frame from the USB webcam pointed at the device screen.
+
+    Returns PNG bytes (base64), optional OCR text, and backend metadata.
+    Requires the `[ui]` extras (opencv-python-headless) and a camera
+    configured via `MESHTASTIC_UI_CAMERA_DEVICE[_<ROLE>]`. Falls back to a
+    1×1 black PNG from the null backend when no camera is configured.
+    """
+    import base64
+
+    from . import camera as camera_mod
+
+    cam = camera_mod.get_camera(role)
+    try:
+        png = cam.capture()
+    finally:
+        cam.close()
+
+    result: dict[str, Any] = {
+        "backend": cam.name,
+        "bytes": len(png),
+        "image_base64": base64.b64encode(png).decode("ascii"),
+    }
+    if ocr:
+        from . import ocr as ocr_mod
+
+        result["ocr_backend"] = ocr_mod.backend_name()
+        result["ocr_text"] = ocr_mod.ocr_text(png)
+    return result
+
+
+# ---------- USB power control (uhubctl) -----------------------------------
+
+
+@app.tool()
+def uhubctl_list() -> list[dict[str, Any]]:
+    """List every USB hub + per-port device attachment as seen by `uhubctl`.
+
+    Read-only — no confirm required. Each hub entry includes its location
+    (`1-1.3`), descriptor, whether it supports Per-Port Power Switching,
+    and a list of populated ports with VID:PID of attached devices.
+    Useful for pre-flight checks before a destructive power-cycle call.
+    """
+    from . import uhubctl as uhubctl_mod
+
+    return uhubctl_mod.list_hubs()
+
+
+@app.tool()
+def uhubctl_power(
+    action: str,
+    location: str | None = None,
+    port: int | None = None,
+    role: str | None = None,
+    confirm: bool = False,
+) -> dict[str, Any]:
+    """Power a USB hub port on or off via `uhubctl -a on|off`.
+
+    Target the port by either (`location`, `port`) — raw uhubctl syntax,
+    e.g. `location="1-1.3", port=2` — OR by `role` ("nrf52", "esp32s3").
+    Role lookup honors `MESHTASTIC_UHUBCTL_LOCATION_<ROLE>` +
+    `_PORT_<ROLE>` env vars first, falls back to VID auto-detection.
+
+    `action="off"` requires `confirm=True` (destructive — the attached
+    device will immediately disappear from the OS).
+    """
+    from . import uhubctl as uhubctl_mod
+
+    action_lower = action.lower()
+    if action_lower not in {"on", "off"}:
+        raise ValueError(f"action must be 'on' or 'off', got {action!r}")
+    if action_lower == "off" and not confirm:
+        raise uhubctl_mod.UhubctlError(
+            "uhubctl_power action='off' requires confirm=True"
+        )
+    loc, p = _resolve_uhubctl_target(location, port, role)
+    if action_lower == "on":
+        return uhubctl_mod.power_on(loc, p)
+    return uhubctl_mod.power_off(loc, p)
+
+
+@app.tool()
+def uhubctl_cycle(
+    location: str | None = None,
+    port: int | None = None,
+    role: str | None = None,
+    delay_s: int = 2,
+    confirm: bool = False,
+) -> dict[str, Any]:
+    """Power a USB hub port off, wait `delay_s` seconds, then on.
+
+    The typical hard-reset sequence — shorter than off+on as two RPCs
+    because uhubctl handles the timing in-process. Target by (location,
+    port) or by role (see `uhubctl_power`). Requires `confirm=True`.
+    """
+    from . import uhubctl as uhubctl_mod
+
+    if not confirm:
+        raise uhubctl_mod.UhubctlError("uhubctl_cycle requires confirm=True")
+    if delay_s < 0 or delay_s > 60:
+        raise ValueError(f"delay_s must be 0..60, got {delay_s}")
+    loc, p = _resolve_uhubctl_target(location, port, role)
+    return uhubctl_mod.cycle(loc, p, delay_s=delay_s)
+
+
+def _resolve_uhubctl_target(
+    location: str | None, port: int | None, role: str | None
+) -> tuple[str, int]:
+    """Shared arg-resolution for uhubctl_power + uhubctl_cycle."""
+    from . import uhubctl as uhubctl_mod
+
+    if role is not None:
+        if location is not None or port is not None:
+            raise ValueError("pass either `role` OR (`location` + `port`), not both")
+        return uhubctl_mod.resolve_target(role)
+    if location is None or port is None:
+        raise ValueError("must pass `role` or both `location` and `port`")
+    return (location, int(port))
+
+
 # ---------- Direct hardware tools -----------------------------------------
 
 

mcp-server/src/meshtastic_mcp/uhubctl.py

@@ -0,0 +1,321 @@
+"""USB hub power control via `uhubctl` — hard-recovery for wedged devices +
+deliberate offline-peer simulation for mesh tests.
+
+Why: when a Meshtastic device's serial port wedges (stuck in a boot loop,
+frozen USB CDC, crashed firmware that didn't reboot), the only recovery is
+a physical unplug. uhubctl toggles VBUS per-port on any hub with Per-Port
+Power Switching (PPPS) support — which is most externally-powered hubs
+from the last ~5 years — so the harness can power-cycle a device
+programmatically.
+
+Architecture:
+- `list_hubs()` parses `uhubctl` default output into structured records.
+- `find_port_for_vid(vid)` walks the hubs to find which location+port
+  hosts a given USB VID.
+- `resolve_target(role)` is the public entry for callers that know a role
+  (`nrf52`, `esp32s3`) but not a hub location: env-var pins win, VID
+  auto-detect falls back.
+- `power_on`, `power_off`, `cycle` wrap the corresponding `uhubctl -a`
+  invocations, routed through `hw_tools._run` so they share tee-to-flash-
+  log + timeout handling with esptool / nrfutil / picotool.
+
+Sudo policy: **fail fast**. Modern macOS + most PPPS-capable hubs work
+without root, but Linux without udev rules (or old macOS with specific
+driver quirks) still needs it. We run uhubctl non-root; if stderr
+matches the classic permission pattern we raise `UhubctlError` with an
+install hint pointing at the uhubctl docs. Auto-wrapping with `sudo`
+would prompt in the middle of test runs — bad for CI.
+"""
+
+from __future__ import annotations
+
+import os
+import re
+from typing import Any, Sequence
+
+from . import config, hw_tools
+
+# ---------- Parser ---------------------------------------------------------
+
+# Hub descriptor line:
+#   Current status for hub 1-1.3 [2109:2817 VIA Labs, Inc. USB2.0 Hub, USB 2.10, 4 ports, ppps]
+_HUB_RE = re.compile(
+    r"^Current status for hub (?P<location>\S+)\s+\[(?P<descriptor>.+)\]\s*$"
+)
+
+# Port line:
+#   "  Port 2: 0103 power enable connect [239a:8029 RAKwireless ...]"
+# The bracketed section is absent for empty ports.
+_PORT_RE = re.compile(
+    r"^\s+Port\s+(?P<port>\d+):\s+(?P<status>\S+)\s+(?P<flags>.*?)"
+    r"(?:\s+\[(?P<device_vid>[0-9a-fA-F]{4}):(?P<device_pid>[0-9a-fA-F]{4})(?:\s+(?P<device_desc>.+))?\])?\s*$"
+)
+
+
+class UhubctlError(RuntimeError):
+    """Raised on uhubctl-specific failures: parse errors, permission denied,
+    hub-not-found, or PPPS not supported."""
+
+
+# ---------- Role → VID map -------------------------------------------------
+
+# Mirrors the default hub_profile in `mcp-server/tests/conftest.py:335`.
+# Note: esp32s3 and esp32s3_alt share a logical role — we search both.
+ROLE_VIDS: dict[str, tuple[int, ...]] = {
+    "nrf52": (0x239A,),
+    "esp32s3": (0x303A, 0x10C4),
+}
+
+
+def _normalize_role(role: str) -> str:
+    """Collapse `esp32s3_alt` → `esp32s3` to match the tier conventions."""
+    return role.split("_alt", 1)[0].lower()
+
+
+# ---------- Core subprocess runner -----------------------------------------
+
+
+# If uhubctl hits a permission problem — most commonly Linux without the
+# udev rules, or a macOS variant where the kernel holds the hub driver —
+# it prints something like "Permission denied. Try running as root".
+# Linux error text varies; we match a broad substring rather than exact.
+_PERM_ERROR_PATTERNS = (
+    "permission denied",
+    "operation not permitted",
+    "try running as root",
+    "need root",
+    "requires root",
+)
+
+
+def _run_uhubctl(args: Sequence[str], *, timeout: float = 30.0) -> dict[str, Any]:
+    """Invoke uhubctl with the given args. Returns `hw_tools._run`'s dict.
+
+    Translates permission-denied failures into a `UhubctlError` with the
+    install hint, so callers don't have to match stderr themselves. Other
+    non-zero exits are returned as-is for the caller to interpret.
+    """
+    binary = config.uhubctl_bin()
+    result = hw_tools._run(binary, args, timeout=timeout)  # noqa: SLF001
+    if result["exit_code"] != 0:
+        combined = (result.get("stderr") or "") + "\n" + (result.get("stdout") or "")
+        lower = combined.lower()
+        if any(pat in lower for pat in _PERM_ERROR_PATTERNS):
+            raise UhubctlError(
+                "uhubctl exited with a permission error. Install the udev "
+                "rules on Linux, or try `sudo` as a fallback: "
+                "https://github.com/mvp/uhubctl#linux-usb-permissions\n"
+                f"stderr: {result.get('stderr_tail')!r}"
+            )
+    return result
+
+
+# ---------- List / parse ---------------------------------------------------
+
+
+def parse_list_output(output: str) -> list[dict[str, Any]]:
+    """Parse the default `uhubctl` stdout into structured hubs.
+
+    Each hub: {
+        "location":   "1-1.3",
+        "descriptor": "2109:2817 VIA Labs ...",
+        "vid":        0x2109,
+        "pid":        0x2817,
+        "ppps":       bool,
+        "ports":      [{"port": int, "status": str, "flags": str,
+                         "device_vid": int | None, "device_pid": int | None,
+                         "device_desc": str | None}, ...],
+    }
+    """
+    hubs: list[dict[str, Any]] = []
+    current: dict[str, Any] | None = None
+
+    for line in output.splitlines():
+        hm = _HUB_RE.match(line)
+        if hm:
+            descriptor = hm.group("descriptor")
+            hub_vid, hub_pid = None, None
+            vid_match = re.match(r"([0-9a-fA-F]{4}):([0-9a-fA-F]{4})", descriptor)
+            if vid_match:
+                hub_vid = int(vid_match.group(1), 16)
+                hub_pid = int(vid_match.group(2), 16)
+            current = {
+                "location": hm.group("location"),
+                "descriptor": descriptor,
+                "vid": hub_vid,
+                "pid": hub_pid,
+                "ppps": ", ppps" in descriptor or descriptor.endswith("ppps"),
+                "ports": [],
+            }
+            hubs.append(current)
+            continue
+
+        pm = _PORT_RE.match(line)
+        if pm and current is not None:
+            device_vid = pm.group("device_vid")
+            device_pid = pm.group("device_pid")
+            current["ports"].append(
+                {
+                    "port": int(pm.group("port")),
+                    "status": pm.group("status"),
+                    "flags": (pm.group("flags") or "").strip(),
+                    "device_vid": int(device_vid, 16) if device_vid else None,
+                    "device_pid": int(device_pid, 16) if device_pid else None,
+                    "device_desc": (pm.group("device_desc") or "").strip() or None,
+                }
+            )
+    return hubs
+
+
+def list_hubs() -> list[dict[str, Any]]:
+    """Enumerate every hub uhubctl can see, with per-port device attachments.
+
+    Pure read — no power state changes. Useful as a pre-flight check before
+    a destructive `power_off` call.
+    """
+    result = _run_uhubctl([], timeout=15.0)
+    if result["exit_code"] != 0:
+        raise UhubctlError(
+            f"uhubctl list failed (exit {result['exit_code']}): {result.get('stderr_tail')!r}"
+        )
+    return parse_list_output(result["stdout"])
+
+
+# ---------- Lookup / resolution -------------------------------------------
+
+
+def find_port_for_vid(
+    vid: int, pid: int | None = None, *, only_ppps: bool = True
+) -> list[tuple[str, int]]:
+    """Return ALL (location, port) matches for a device VID (optionally +PID).
+
+    `only_ppps=True` filters out hubs that don't advertise PPPS — we can't
+    control them anyway. Callers that want to diagnose a missing device can
+    pass `only_ppps=False` to see if the device is on a non-controllable
+    hub (and raise a clearer error).
+    """
+    hubs = list_hubs()
+    matches: list[tuple[str, int]] = []
+    for hub in hubs:
+        if only_ppps and not hub["ppps"]:
+            continue
+        for port in hub["ports"]:
+            if port["device_vid"] != vid:
+                continue
+            if pid is not None and port["device_pid"] != pid:
+                continue
+            matches.append((hub["location"], port["port"]))
+    return matches
+
+
+def resolve_target(role: str) -> tuple[str, int]:
+    """Resolve a Meshtastic role to (hub_location, port_number).
+
+    Priority:
+      1. Env vars `MESHTASTIC_UHUBCTL_LOCATION_<ROLE>` + `_PORT_<ROLE>`
+         (e.g. `MESHTASTIC_UHUBCTL_LOCATION_NRF52=1-1.3`, `_PORT_NRF52=2`).
+      2. VID auto-detect against `ROLE_VIDS[role]`, taking the first PPPS
+         match.
+
+    Raises `UhubctlError` on ambiguity (multiple matches) or no-match. The
+    env-var path exists specifically to disambiguate when two devices share
+    a VID.
+    """
+    role = _normalize_role(role)
+    env_key_loc = f"MESHTASTIC_UHUBCTL_LOCATION_{role.upper()}"
+    env_key_port = f"MESHTASTIC_UHUBCTL_PORT_{role.upper()}"
+    loc = os.environ.get(env_key_loc)
+    port_str = os.environ.get(env_key_port)
+    if loc and port_str:
+        try:
+            return (loc, int(port_str))
+        except ValueError as exc:
+            raise UhubctlError(
+                f"{env_key_port}={port_str!r} is not a valid integer"
+            ) from exc
+
+    if role not in ROLE_VIDS:
+        raise UhubctlError(
+            f"unknown role {role!r}; known roles: {sorted(ROLE_VIDS)}. "
+            f"Set {env_key_loc} + {env_key_port} to pin manually."
+        )
+
+    matches: list[tuple[str, int]] = []
+    for vid in ROLE_VIDS[role]:
+        matches.extend(find_port_for_vid(vid))
+
+    if not matches:
+        vids = ", ".join(f"0x{v:04x}" for v in ROLE_VIDS[role])
+        raise UhubctlError(
+            f"no controllable hub hosts a device with VID in {{{vids}}} "
+            f"for role={role!r}. Check the device is plugged into a "
+            f"PPPS-capable hub, or pin manually via {env_key_loc} + {env_key_port}."
+        )
+    if len(matches) > 1:
+        shown = ", ".join(f"{loc}:port{p}" for loc, p in matches)
+        raise UhubctlError(
+            f"ambiguous: multiple devices match role={role!r} ({shown}). "
+            f"Pin the target via {env_key_loc} + {env_key_port}."
+        )
+    return matches[0]
+
+
+# ---------- Power actions --------------------------------------------------
+
+
+def _action(
+    action: str,
+    location: str,
+    port: int,
+    *,
+    delay_s: int | None = None,
+    timeout: float = 30.0,
+) -> dict[str, Any]:
+    args: list[str] = ["-a", action, "-l", location, "-p", str(port)]
+    if delay_s is not None:
+        args.extend(["-d", str(delay_s)])
+    # Suppress verbose "before" printout so our parser doesn't have to skip it.
+    args.append("-N")
+    result = _run_uhubctl(args, timeout=timeout)
+    if result["exit_code"] != 0:
+        raise UhubctlError(
+            f"uhubctl -a {action} -l {location} -p {port} failed "
+            f"(exit {result['exit_code']}): {result.get('stderr_tail')!r}"
+        )
+    return {
+        "action": action,
+        "location": location,
+        "port": port,
+        "delay_s": delay_s,
+        "duration_s": result["duration_s"],
+    }
+
+
+def power_on(location: str, port: int) -> dict[str, Any]:
+    """Drive the port VBUS high. Device re-enumerates in 1-3 s on healthy hubs."""
+    return _action("on", location, port)
+
+
+def power_off(location: str, port: int) -> dict[str, Any]:
+    """Drive the port VBUS low. Device disappears from `list_devices` immediately."""
+    return _action("off", location, port)
+
+
+def cycle(location: str, port: int, delay_s: int = 2) -> dict[str, Any]:
+    """Off → wait `delay_s` → on. The common hard-reset pattern."""
+    # uhubctl's own `-a cycle` handles the delay internally; we use a
+    # slightly longer timeout to accommodate delay_s + enumeration.
+    return _action("cycle", location, port, delay_s=delay_s, timeout=30.0 + delay_s * 2)
+
+
+__all__ = [
+    "ROLE_VIDS",
+    "UhubctlError",
+    "cycle",
+    "find_port_for_vid",
+    "list_hubs",
+    "parse_list_output",
+    "power_off",
+    "power_on",
+    "resolve_target",
+]

mcp-server/src/meshtastic_mcp/userprefs.py

@@ -393,6 +393,7 @@ def build_testing_profile(
     long_name: str | None = None,
     disable_mqtt: bool = True,
     disable_position: bool = False,
+    enable_ui_log: bool = False,
 ) -> dict[str, Any]:
     """Build a USERPREFS dict for an isolated test-mesh device.
 
@@ -423,6 +424,10 @@ def build_testing_profile(
             traffic never leaks to a public broker.
         disable_position: if True, disables GPS + position broadcasts — useful
             when test devices sit on a bench without antennas.
+        enable_ui_log: if True, stamps `USERPREFS_UI_TEST_LOG=true` so the
+            firmware emits one `Screen: frame N/M name=... reason=...` log
+            line per frame transition. Test-only; off by default because the
+            log is chatty (multiple times per second during UI interaction).
 
     """
     if region not in KNOWN_REGIONS:
@@ -475,6 +480,9 @@ def build_testing_profile(
         prefs["USERPREFS_CONFIG_OWNER_LONG_NAME"] = long_name
     if short_name is not None:
         prefs["USERPREFS_CONFIG_OWNER_SHORT_NAME"] = short_name
+    if enable_ui_log:
+        # Consumed by `#ifdef USERPREFS_UI_TEST_LOG` in src/graphics/Screen.cpp.
+        prefs["USERPREFS_UI_TEST_LOG"] = True
 
     return prefs
 

mcp-server/tests/_power.py

@@ -0,0 +1,112 @@
+"""USB hub power control for tests — thin composition of the `uhubctl`
+module + `_port_discovery.resolve_port_by_role`.
+
+Why separate from the production module:
+- `meshtastic_mcp.uhubctl.cycle` returns as soon as uhubctl exits (VBUS is
+  back on, but the device hasn't finished enumerating as a CDC port yet).
+- Tests that want to immediately issue a `connect(port=...)` need the NEW
+  `/dev/cu.*` path, which can differ from the pre-cycle path on nRF52
+  boards (CDC re-enumeration assigns a fresh `cu.usbmodemNNNN`).
+- `resolve_port_by_role` already handles that wait + path-resolution for
+  the `factory_reset` flow. Composing the two gives a one-call helper.
+
+Also exposes `is_uhubctl_available()` so fixtures can skip cleanly when
+uhubctl isn't installed — we never want "no uhubctl" to look like a test
+failure.
+"""
+
+from __future__ import annotations
+
+import time
+from typing import Any
+
+from meshtastic_mcp import config as config_mod
+from meshtastic_mcp import uhubctl as uhubctl_mod
+
+from ._port_discovery import resolve_port_by_role
+
+
+def is_uhubctl_available() -> bool:
+    """Return True iff `config.uhubctl_bin()` resolves AND the binary is callable.
+
+    Soft-fails silently — fixtures use this to `pytest.skip` with an
+    actionable message when the operator hasn't installed uhubctl.
+    """
+    try:
+        config_mod.uhubctl_bin()
+    except Exception:  # noqa: BLE001
+        return False
+    # Do NOT actually invoke uhubctl here — on macOS a non-sudo run would
+    # fail, which is a config issue, not a tool-missing issue. That gets
+    # surfaced to the user when they actually run a recovery action.
+    return True
+
+
+def power_on(role: str) -> dict[str, Any]:
+    """Power on the hub port hosting `role`. Does NOT wait for re-enumeration.
+    Use `power_cycle` or follow with `resolve_port_by_role` to block on readiness.
+    """
+    loc, port = uhubctl_mod.resolve_target(role)
+    return uhubctl_mod.power_on(loc, port)
+
+
+def power_off(role: str) -> dict[str, Any]:
+    """Power off the hub port hosting `role`. The device disappears from
+    `list_devices` immediately.
+    """
+    loc, port = uhubctl_mod.resolve_target(role)
+    return uhubctl_mod.power_off(loc, port)
+
+
+def power_cycle(
+    role: str,
+    *,
+    delay_s: int = 2,
+    rediscover_timeout_s: float = 30.0,
+) -> str:
+    """Cycle the port hosting `role`, wait for re-enumeration, return the
+    new port path.
+
+    On nRF52 the post-cycle path typically matches the pre-cycle path, but
+    macOS may assign a different `/dev/cu.usbmodemNNNN` if the previous
+    CDC endpoint hasn't been fully released. `resolve_port_by_role`
+    handles that transparently.
+    """
+    loc, port = uhubctl_mod.resolve_target(role)
+    uhubctl_mod.cycle(loc, port, delay_s=delay_s)
+    # After uhubctl exits, VBUS is on but the device may still be in
+    # bootloader init. Give it ~500 ms head-start before polling so we
+    # don't spam list_devices pointlessly.
+    time.sleep(0.5)
+    return resolve_port_by_role(role, timeout_s=rediscover_timeout_s)
+
+
+def wait_for_absence(role: str, *, timeout_s: float = 10.0) -> None:
+    """Block until a device matching `role` is NOT in `list_devices`.
+
+    Used by the recovery tier to assert power_off actually took effect.
+    Raises TimeoutError on failure.
+    """
+    from meshtastic_mcp import devices as devices_mod
+
+    from ._port_discovery import _ROLE_VIDS, _coerce_vid  # type: ignore[attr-defined]
+
+    if role not in _ROLE_VIDS:
+        raise ValueError(f"unknown role {role!r}")
+    wanted = _ROLE_VIDS[role]
+    deadline = time.monotonic() + timeout_s
+    while time.monotonic() < deadline:
+        found = devices_mod.list_devices(include_unknown=True)
+        if not any(_coerce_vid(d.get("vid")) in wanted for d in found):
+            return
+        time.sleep(0.3)
+    raise TimeoutError(f"role {role!r} still visible after {timeout_s}s of power_off")
+
+
+__all__ = [
+    "is_uhubctl_available",
+    "power_cycle",
+    "power_off",
+    "power_on",
+    "wait_for_absence",
+]

mcp-server/tests/conftest.py

@@ -123,15 +123,24 @@ def pytest_collection_modifyitems(
             return (2, item.nodeid)
         if "/monitor/" in path or "tests/monitor" in path:
             return (3, item.nodeid)
-        if "/fleet/" in path or "tests/fleet" in path:
+        # Recovery tier: explicitly cycles device power via uhubctl. Slots
+        # between monitor (read-only) and ui (state-preserving) so any tier
+        # after it starts from a known re-enumerated + re-verified state.
+        if "/recovery/" in path or "tests/recovery" in path:
             return (4, item.nodeid)
+        # UI tier slots here — read-only w.r.t. mesh state, only mutates
+        # the on-screen UI (BACK×5 guard restores home before each test).
+        if "/ui/" in path or "tests/ui" in path:
+            return (5, item.nodeid)
+        if "/fleet/" in path or "tests/fleet" in path:
+            return (6, item.nodeid)
         # State-mutating tiers run last.
         if "/admin/" in path or "tests/admin" in path:
-            return (5, item.nodeid)
+            return (7, item.nodeid)
         if "/provisioning/" in path or "tests/provisioning" in path:
-            return (6, item.nodeid)
+            return (8, item.nodeid)
         # Top-level + anything else falls between.
-        return (7, item.nodeid)
+        return (9, item.nodeid)
 
     items.sort(key=sort_key)
 
@@ -156,13 +165,20 @@ def session_seed(request: pytest.FixtureRequest) -> str:
 
 @pytest.fixture(scope="session")
 def test_profile(session_seed: str) -> dict[str, Any]:
-    """The canonical isolated-mesh test profile for this session."""
+    """The canonical isolated-mesh test profile for this session.
+
+    `enable_ui_log=True` stamps `USERPREFS_UI_TEST_LOG` so the firmware
+    emits `Screen: frame N/M name=... reason=...` log lines per UI
+    transition — consumed by the `tests/ui/` tier. Harmless on boards
+    without a screen (the `#ifdef` sits behind `HAS_SCREEN`).
+    """
     return userprefs.build_testing_profile(
         psk_seed=session_seed,
         channel_name="McpTest",
         channel_num=88,
         region="US",
         modem_preset="LONG_FAST",
+        enable_ui_log=True,
     )
 
 
@@ -654,6 +670,7 @@ def pytest_generate_tests(metafunc: pytest.Metafunc) -> None:
 def baked_single(
     baked_mesh: dict[str, Any],
     baked_single_role: str,
+    hub_devices: dict[str, str],
 ) -> dict[str, Any]:
     """Function-scoped: a single verified baked device.
 
@@ -662,10 +679,75 @@ def baked_single(
     (e.g. `test_owner_survives_reboot[nrf52]` +
     `test_owner_survives_reboot[esp32s3]`). Tests never hardcode a role
     and never skip a device that happens to be connected.
+
+    Auto-recovery: if the baked device fails a pre-test `device_info` probe
+    AND uhubctl is available, power-cycle the port once and retry. Without
+    uhubctl, surface the wedge as a clear skip. This catches "device got
+    stuck between tests" without masking persistent regressions (a second
+    wedge after cycling still skips).
     """
     if baked_single_role not in baked_mesh:
         pytest.skip(f"role {baked_single_role!r} not present on the hub")
-    return {"role": baked_single_role, **baked_mesh[baked_single_role]}
+
+    entry = baked_mesh[baked_single_role]
+    port = entry.get("port")
+    if port:
+        try:
+            _run_with_timeout(lambda: info.device_info(port=port, timeout_s=3.0), 5.0)
+        except Exception:
+            # Device didn't respond. Try a power-cycle recovery if uhubctl
+            # is installed; otherwise surface a skip that names the root
+            # cause clearly.
+            from tests import _power
+
+            if not _power.is_uhubctl_available():
+                pytest.skip(
+                    f"device {baked_single_role!r} unresponsive on {port}; "
+                    "install uhubctl (`brew install uhubctl` / `apt install "
+                    "uhubctl`) for auto power-cycle recovery"
+                )
+            try:
+                new_port = _power.power_cycle(baked_single_role, delay_s=2)
+            except Exception as exc:  # noqa: BLE001
+                pytest.skip(
+                    f"device {baked_single_role!r} wedged and power-cycle "
+                    f"failed: {exc}"
+                )
+            # Mutate both the session-scoped `hub_devices` map AND the
+            # baked_mesh entry so downstream fixtures see the recovered port.
+            hub_devices[baked_single_role] = new_port
+            baked_mesh[baked_single_role]["port"] = new_port
+            entry = baked_mesh[baked_single_role]
+    return {"role": baked_single_role, **entry}
+
+
+@pytest.fixture
+def power_cycle(
+    hub_devices: dict[str, str],
+) -> Callable[..., str]:
+    """Return a callable `(role, delay_s=2) -> new_port` that hard-resets the
+    hub port hosting `role`. Skips the test cleanly when uhubctl isn't
+    installed — never want "no uhubctl" to look like a test failure.
+
+    The callable mutates `hub_devices[role]` in place so subsequent fixture
+    lookups pick up the post-cycle port (mirrors the pattern in
+    provisioning/test_userprefs_survive_factory_reset.py).
+    """
+    from tests import _power
+
+    if not _power.is_uhubctl_available():
+        pytest.skip(
+            "uhubctl not installed; this test needs it for power control. "
+            "Install via `brew install uhubctl` (macOS) or `apt install "
+            "uhubctl` (Debian/Ubuntu)."
+        )
+
+    def _cycle(role: str, delay_s: int = 2) -> str:
+        new_port = _power.power_cycle(role, delay_s=delay_s)
+        hub_devices[role] = new_port
+        return new_port
+
+    return _cycle
 
 
 _DEFAULT_ROLE_ENVS = {
@@ -960,6 +1042,45 @@ def _run_with_timeout(fn: Callable[[], Any], timeout: float) -> Any:
             raise TimeoutError(f"operation did not complete within {timeout}s") from exc
 
 
+def _attach_ui_captures(item: pytest.Item, report: Any) -> None:
+    """Embed per-step UI captures (PNG + OCR) into the pytest-html extras.
+
+    Runs for every UI-tier test on BOTH pass and fail so the HTML report
+    always shows the image strip + OCR transcript. Silently no-ops if
+    pytest-html isn't installed or the test didn't use `frame_capture`.
+    """
+    captures = getattr(item, "_ui_captures", None)
+    if not captures:
+        return
+    try:
+        from pytest_html import extras as html_extras  # type: ignore[import-untyped]
+    except ImportError:
+        return
+
+    existing = getattr(report, "extras", None) or []
+    extras_list = list(existing)
+    for cap in captures:
+        png_path = cap.get("png_path")
+        label = f"{cap.get('step', '?')}: {cap.get('label', '')}"
+        frame = cap.get("frame") or {}
+        frame_str = (
+            f" — frame {frame.get('idx')} {frame.get('name')!r}" if frame else ""
+        )
+        if png_path:
+            try:
+                with open(png_path, "rb") as fh:
+                    import base64
+
+                    b64 = base64.b64encode(fh.read()).decode("ascii")
+                extras_list.append(html_extras.png(b64, name=f"{label}{frame_str}"))
+            except OSError:
+                pass
+        ocr = (cap.get("ocr_text") or "").strip()
+        if ocr:
+            extras_list.append(html_extras.text(ocr, name=f"OCR: {label}{frame_str}"))
+    report.extras = extras_list  # type: ignore[attr-defined]
+
+
 @pytest.hookimpl(hookwrapper=True)
 def pytest_runtest_makereport(item: pytest.Item, call: pytest.CallInfo[Any]) -> Any:
     """On test failure, attach serial capture + device state as report artifacts.
@@ -967,10 +1088,20 @@ def pytest_runtest_makereport(item: pytest.Item, call: pytest.CallInfo[Any]) ->
     Hard-bounded by `_run_with_timeout` — if the device is unreachable (stuck
     port, unbaked firmware, dead board), the dump is skipped rather than
     hanging the session.
+
+    For UI-tier tests, also embeds per-step camera captures + OCR on every
+    test (pass or fail) so the HTML report shows visual evidence of what
+    the device did.
     """
     outcome = yield
     report = outcome.get_result()
 
+    # Attach UI captures on any outcome (pass + fail) — these are the whole
+    # point of the UI tier. Do this before the failure-only branch below so
+    # passing tests still get their image strip.
+    if report.when == "call":
+        _attach_ui_captures(item, report)
+
     if report.when != "call" or report.outcome != "failed":
         return
 

mcp-server/tests/mesh/test_peer_offline_recovery.py

@@ -0,0 +1,155 @@
+"""Isolation test for peer-offline-then-back mid-conversation.
+
+Verifies the mesh stack's behavior when a peer is physically powered
+off mid-send via uhubctl, then powered back on.
+
+Flow (parametrized over every directed mesh_pair):
+  1. Bilateral PKI warmup (same pattern as test_direct_with_ack).
+  2. TX sends a broadcast text "msg-1" — RX confirms receipt via pubsub.
+  3. Power OFF RX via uhubctl. The RX device disappears from the OS.
+  4. TX sends a directed text "msg-2" with wantAck=True. Firmware retries
+     internally for ~30s before giving up. Assertion: the packet object
+     was accepted by the TX stack (non-None) — we don't assert an ACK
+     since there's no peer to send one.
+  5. Power ON RX. Wait for re-enumeration + boot.
+  6. Bilateral PKI re-nudge — RX's in-RAM PKI cache was wiped on reboot,
+     so the first directed send may err=35 without a fresh NodeInfo ping.
+  7. TX sends a directed "msg-3" — RX receives it via pubsub, confirming
+     the mesh recovered.
+
+Skips cleanly if uhubctl isn't installed (via the `power_cycle` fixture's
+auto-skip). Skips for pair directions where RX isn't power-controllable
+(e.g. a USB-IF hub that doesn't support PPPS for its port).
+"""
+
+from __future__ import annotations
+
+import time
+from typing import Any
+
+import pytest
+from meshtastic_mcp.connection import connect
+from tests import _power
+from tests._port_discovery import resolve_port_by_role
+
+from ._receive import ReceiveCollector, nudge_nodeinfo
+
+
+@pytest.mark.timeout(360)
+def test_peer_offline_then_recovers(
+    mesh_pair: dict[str, Any],
+    power_cycle,  # noqa: ARG001 — forces uhubctl-availability skip
+    hub_devices: dict[str, str],
+) -> None:
+    tx_port = mesh_pair["tx"]["port"]
+    rx_node_num = mesh_pair["rx"]["my_node_num"]
+    tx_role = mesh_pair["tx_role"]
+    rx_role = mesh_pair["rx_role"]
+
+    unique_pre = f"peer-offline-pre-{tx_role}-to-{rx_role}-{int(time.time())}"
+    unique_post = f"peer-offline-post-{tx_role}-to-{rx_role}-{int(time.time())}"
+
+    # Step 1 + 2: warm up + confirm baseline delivery works before the test.
+    with ReceiveCollector(
+        mesh_pair["rx"]["port"], topic="meshtastic.receive.text"
+    ) as rx:
+        rx.broadcast_nodeinfo_ping()
+        with connect(port=tx_port) as tx_iface:
+            nudge_nodeinfo(tx_iface)
+            # Wait for bilateral PKI (RX pubkey in TX's nodesByNum).
+            deadline = time.monotonic() + 45.0
+            last_nudge = time.monotonic()
+            while time.monotonic() < deadline:
+                rec = (tx_iface.nodesByNum or {}).get(rx_node_num, {})
+                if rec.get("user", {}).get("publicKey"):
+                    break
+                if time.monotonic() - last_nudge > 15.0:
+                    rx.broadcast_nodeinfo_ping()
+                    nudge_nodeinfo(tx_iface)
+                    last_nudge = time.monotonic()
+                time.sleep(1.0)
+            else:
+                pytest.skip(
+                    f"bilateral PKI never completed ({tx_role}→{rx_role}); "
+                    "can't run the offline test without a warm baseline"
+                )
+
+            tx_iface.sendText(unique_pre, destinationId=rx_node_num, wantAck=True)
+            got = rx.wait_for(
+                lambda pkt: pkt.get("decoded", {}).get("text") == unique_pre,
+                timeout=30,
+            )
+            assert got is not None, (
+                f"baseline directed send ({tx_role}→{rx_role}) didn't land — "
+                "skipping offline test to avoid false positive"
+            )
+
+    # Step 3: power off RX. uhubctl skips the test with a clear message if
+    # the RX role isn't on a controllable hub.
+    try:
+        _power.power_off(rx_role)
+    except Exception as exc:  # noqa: BLE001
+        pytest.skip(f"can't power-control {rx_role!r}: {exc}")
+
+    try:
+        _power.wait_for_absence(rx_role, timeout_s=10.0)
+    except TimeoutError:
+        _power.power_on(rx_role)  # restore hub state before failing
+        resolve_port_by_role(rx_role, timeout_s=30.0)
+        pytest.fail(f"{rx_role!r} didn't disappear after power_off")
+
+    # Step 4: send to a peer that isn't there. Firmware will retry
+    # internally. We don't wait for an ACK (there won't be one); we just
+    # confirm TX's stack accepts the packet without crashing.
+    try:
+        with connect(port=tx_port) as tx_iface:
+            packet = tx_iface.sendText(
+                f"while-offline-{rx_role}",
+                destinationId=rx_node_num,
+                wantAck=True,
+            )
+            assert packet is not None
+            # Give firmware a moment to do a retry or two while RX is down.
+            time.sleep(5.0)
+    except Exception as exc:  # noqa: BLE001 — TX should survive the peer being gone
+        # Restore RX before reraising so the bench state is sane.
+        _power.power_on(rx_role)
+        resolve_port_by_role(rx_role, timeout_s=30.0)
+        raise AssertionError(f"TX crashed when sending to offline peer: {exc}") from exc
+
+    # Step 5: power RX back on + rediscover.
+    _power.power_on(rx_role)
+    time.sleep(0.5)
+    new_rx_port = resolve_port_by_role(rx_role, timeout_s=30.0)
+    hub_devices[rx_role] = new_rx_port
+
+    # Step 6 + 7: bilateral re-warmup + directed send that should now work.
+    with ReceiveCollector(new_rx_port, topic="meshtastic.receive.text") as rx:
+        # RX rebooted → its PKI cache is gone. Re-warm.
+        rx.broadcast_nodeinfo_ping()
+        with connect(port=tx_port) as tx_iface:
+            nudge_nodeinfo(tx_iface)
+            time.sleep(3.0)
+
+            got = None
+            for _attempt in range(3):
+                packet = tx_iface.sendText(
+                    unique_post,
+                    destinationId=rx_node_num,
+                    wantAck=True,
+                )
+                assert packet is not None
+                got = rx.wait_for(
+                    lambda pkt: pkt.get("decoded", {}).get("text") == unique_post,
+                    timeout=30,
+                )
+                if got is not None:
+                    break
+                rx.broadcast_nodeinfo_ping()
+                nudge_nodeinfo(tx_iface)
+                time.sleep(5.0)
+
+    assert got is not None, (
+        f"post-recovery directed send {unique_post!r} ({tx_role}→{rx_role}) "
+        "never landed — recovery path may be broken"
+    )

mcp-server/tests/recovery/__init__.py

@@ -0,0 +1,6 @@
+"""Recovery tier — exercises `uhubctl` power control end-to-end.
+
+Requires `uhubctl` installed AND at least one connected device on a
+PPPS-capable hub. The whole tier skips cleanly via
+`tests/recovery/conftest.py::_recovery_tier_guard` when either is missing.
+"""

mcp-server/tests/recovery/conftest.py

@@ -0,0 +1,44 @@
+"""Recovery-tier gating + shared helpers.
+
+Session-scoped guard skips the whole tier when uhubctl isn't installed.
+Tests under this directory assume uhubctl is callable AND that at least
+one hub role is detected on a PPPS-capable port.
+"""
+
+from __future__ import annotations
+
+import pytest
+
+
+@pytest.fixture(scope="session", autouse=True)
+def _recovery_tier_guard() -> None:
+    """Skip the tier when uhubctl is unavailable OR no device is on a
+    PPPS-capable hub. Prints the specific reason so operators know what
+    to fix."""
+    from tests import _power
+
+    if not _power.is_uhubctl_available():
+        pytest.skip(
+            "uhubctl not installed; recovery tier needs it. "
+            "Install via `brew install uhubctl` or `apt install uhubctl`.",
+            allow_module_level=True,
+        )
+
+    # Probe: can we even list hubs? (A macOS user without sudo gets a
+    # permission error here — we'd rather find out once at tier-start than
+    # 6 tests later.)
+    from meshtastic_mcp import uhubctl
+
+    try:
+        hubs = uhubctl.list_hubs()
+    except uhubctl.UhubctlError as exc:
+        pytest.skip(
+            f"uhubctl list failed: {exc}. Try the udev rules or `sudo` as a fallback.",
+            allow_module_level=True,
+        )
+
+    if not any(h["ppps"] for h in hubs):
+        pytest.skip(
+            "no PPPS-capable hubs detected — recovery tier has nothing to exercise.",
+            allow_module_level=True,
+        )

mcp-server/tests/recovery/test_list_hubs.py

@@ -0,0 +1,43 @@
+"""Smoke test: `uhubctl_list` returns a well-formed structure.
+
+No destructive action. Runs first in the tier as a sanity check that the
+tier's dependencies (uhubctl binary + permissions) are actually satisfied.
+"""
+
+from __future__ import annotations
+
+import pytest
+from meshtastic_mcp import uhubctl
+
+
+@pytest.mark.timeout(30)
+def test_list_hubs_returns_at_least_one_ppps_hub() -> None:
+    hubs = uhubctl.list_hubs()
+    assert hubs, "uhubctl found no hubs at all — is a USB hub connected?"
+    assert any(h["ppps"] for h in hubs), (
+        "no PPPS-capable hubs detected; power control won't work. "
+        "Check that the hub supports Per-Port Power Switching."
+    )
+
+
+@pytest.mark.timeout(30)
+def test_list_hubs_structure(hub_devices: dict[str, str]) -> None:
+    hubs = uhubctl.list_hubs()
+    for hub in hubs:
+        assert "location" in hub and hub["location"]
+        assert "ports" in hub and isinstance(hub["ports"], list)
+        for port in hub["ports"]:
+            assert "port" in port and isinstance(port["port"], int)
+            assert "status" in port
+
+    # At least one of the detected Meshtastic roles should show up in some
+    # port's device_vid — otherwise the recovery tier can't drive them.
+    seen_vids = {
+        p["device_vid"] for h in hubs for p in h["ports"] if p["device_vid"] is not None
+    }
+    expected_any = {0x239A, 0x303A, 0x10C4} & seen_vids
+    assert expected_any or not hub_devices, (
+        f"hub_devices detected roles {list(hub_devices)} but uhubctl sees "
+        f"VIDs {sorted(hex(v) for v in seen_vids)} — the devices may be on "
+        "a hub that uhubctl can't see (e.g. built-in laptop ports)."
+    )

mcp-server/tests/recovery/test_power_cycle_preserves_userprefs.py

@@ -0,0 +1,60 @@
+"""Hard reset via uhubctl must NOT wipe NVS. Verify the test profile's
+region + channel survive a power-cycle.
+
+Guards against a regression where a firmware change treats unexpected
+power loss as a factory-reset trigger (e.g. bad EEPROM wear-leveling,
+erase-on-boot-for-safety). Such a regression would be catastrophic for
+field deployments.
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp import admin, info
+from tests import _power
+from tests._port_discovery import resolve_port_by_role
+
+
+@pytest.mark.timeout(180)
+def test_lora_config_survives_power_cycle(
+    baked_single: dict[str, object],
+    test_profile: dict[str, object],
+) -> None:
+    role = baked_single["role"]
+    pre_port = baked_single["port"]
+
+    pre_config = admin.get_config(section="lora", port=pre_port)["config"]["lora"]
+    pre_region = pre_config.get("region")
+    pre_preset = pre_config.get("modem_preset")
+    assert pre_region, f"lora.region not set pre-cycle on {role}"
+
+    # Hard power-cycle.
+    _power.power_cycle(role, delay_s=2)
+    time.sleep(0.5)
+    new_port = resolve_port_by_role(role, timeout_s=30.0)
+    # Let the firmware complete boot before admin reads.
+    time.sleep(2.0)
+    # Quick readiness probe.
+    probe = info.device_info(port=new_port, timeout_s=10.0)
+    assert (
+        probe.get("my_node_num") is not None
+    ), f"device {role!r} didn't respond after power-cycle"
+
+    post_config = admin.get_config(section="lora", port=new_port)["config"]["lora"]
+    post_region = post_config.get("region")
+    post_preset = post_config.get("modem_preset")
+
+    assert post_region == pre_region, (
+        f"lora.region wiped by power-cycle on {role}: "
+        f"pre={pre_region!r} post={post_region!r}"
+    )
+    assert post_preset == pre_preset, (
+        f"lora.modem_preset wiped by power-cycle on {role}: "
+        f"pre={pre_preset!r} post={post_preset!r}"
+    )
+
+    # Channel-0 name should also match the test profile.
+    pri_ch = admin.get_channel_url(port=new_port)
+    assert pri_ch.get("url"), f"channel URL empty after power-cycle on {role}"

mcp-server/tests/recovery/test_power_cycle_roundtrip.py

@@ -0,0 +1,61 @@
+"""Full power-cycle round-trip: off → verify gone → on → verify identity
+preserved.
+
+Parametrized over every connected role. Validates both the uhubctl
+plumbing AND that the device survives a hard reset with the same
+`my_node_num` (no firmware-level identity regeneration).
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp import info
+from tests import _power
+from tests._port_discovery import resolve_port_by_role
+
+
+@pytest.mark.timeout(180)
+def test_power_cycle_preserves_node_identity(
+    baked_single: dict[str, object],
+) -> None:
+    role = baked_single["role"]
+    pre_port = baked_single["port"]
+    pre_node_num = baked_single["my_node_num"]
+    pre_fw = baked_single.get("firmware_version")
+
+    # Record pre-cycle state.
+    pre_info = info.device_info(port=pre_port, timeout_s=5.0)
+    assert pre_info.get("my_node_num") == pre_node_num
+
+    # Power off; confirm the device actually disappears from list_devices.
+    _power.power_off(role)
+    try:
+        _power.wait_for_absence(role, timeout_s=10.0)
+    except TimeoutError:
+        # If it didn't disappear, power it back on so we don't leave the
+        # hub in a weird state for the next test.
+        _power.power_on(role)
+        resolve_port_by_role(role, timeout_s=30.0)
+        pytest.fail(f"device {role!r} stayed visible after power_off")
+
+    # Power back on + re-discover port.
+    _power.power_on(role)
+    time.sleep(0.5)  # head-start before polling
+    new_port = resolve_port_by_role(role, timeout_s=30.0)
+
+    # Give the firmware a moment to finish boot before we hit it with admin.
+    time.sleep(2.0)
+
+    post_info = info.device_info(port=new_port, timeout_s=10.0)
+    assert post_info.get("my_node_num") == pre_node_num, (
+        f"my_node_num changed across power-cycle: pre={pre_node_num:#x} "
+        f"post={post_info.get('my_node_num'):#x}"
+    )
+    # Firmware version must match (same bake, not a re-flash).
+    if pre_fw:
+        assert post_info.get("firmware_version") == pre_fw, (
+            f"firmware changed across cycle: pre={pre_fw} "
+            f"post={post_info.get('firmware_version')}"
+        )

mcp-server/tests/tool_coverage.py

@@ -73,6 +73,13 @@ _TOOL_MAP: dict[str, tuple[str, str]] = {
     "reboot": ("meshtastic_mcp.admin", "reboot"),
     "shutdown": ("meshtastic_mcp.admin", "shutdown"),
     "factory_reset": ("meshtastic_mcp.admin", "factory_reset"),
+    "send_input_event": ("meshtastic_mcp.admin", "send_input_event"),
+    # `capture_screen` in server.py calls camera.get_camera — instrument that.
+    "capture_screen": ("meshtastic_mcp.camera", "get_camera"),
+    # USB power control via uhubctl.
+    "uhubctl_list": ("meshtastic_mcp.uhubctl", "list_hubs"),
+    "uhubctl_power": ("meshtastic_mcp.uhubctl", "power_on"),
+    "uhubctl_cycle": ("meshtastic_mcp.uhubctl", "cycle"),
     # USERPREFS
     "userprefs_manifest": ("meshtastic_mcp.userprefs", "build_manifest"),
     "userprefs_get": ("meshtastic_mcp.userprefs", "read_state"),

mcp-server/tests/ui/__init__.py

@@ -0,0 +1,7 @@
+"""UI tier — input-broker-driven screen navigation tests.
+
+Only runs when a screen-bearing role (esp32s3/heltec-v3) is present on the
+hub AND the firmware was baked with `enable_ui_log=True` (so the
+`Screen: frame N/M name=... reason=...` log lines are emitted). The
+`tests/ui/conftest.py` fixture forces that bake stamp.
+"""

mcp-server/tests/ui/_screen_log.py

@@ -0,0 +1,176 @@
+"""Parse `Screen: frame N/M name=X reason=Y` log lines from `_debug_log_buffer`.
+
+The firmware emits one line per frame transition when
+`USERPREFS_UI_TEST_LOG` is defined (see src/graphics/Screen.cpp). Tests use
+these helpers to assert which frame is shown / to wait for a transition to
+settle before taking a camera capture.
+"""
+
+from __future__ import annotations
+
+import re
+import time
+from dataclasses import dataclass
+from typing import Iterable, Iterator
+
+FRAME_RE = re.compile(
+    r"Screen: frame (?P<idx>\d+)/(?P<count>\d+) name=(?P<name>\S+) reason=(?P<reason>\S+)"
+)
+
+
+@dataclass(frozen=True)
+class FrameEvent:
+    idx: int
+    count: int
+    name: str
+    reason: str
+    raw: str
+
+    @classmethod
+    def parse(cls, line: str) -> "FrameEvent | None":
+        m = FRAME_RE.search(line)
+        if not m:
+            return None
+        return cls(
+            idx=int(m["idx"]),
+            count=int(m["count"]),
+            name=m["name"],
+            reason=m["reason"],
+            raw=line,
+        )
+
+
+def iter_frame_events(lines: Iterable[str]) -> Iterator[FrameEvent]:
+    for line in lines:
+        evt = FrameEvent.parse(line)
+        if evt is not None:
+            yield evt
+
+
+def get_current_frame(lines: list[str]) -> FrameEvent | None:
+    """Return the most recent FrameEvent in `lines`, or None if none found."""
+    for line in reversed(lines):
+        evt = FrameEvent.parse(line)
+        if evt is not None:
+            return evt
+    return None
+
+
+def wait_for_frame(
+    lines: list[str],
+    expected_name: str,
+    *,
+    timeout_s: float = 5.0,
+    poll_interval_s: float = 0.1,
+    reason: str | None = None,
+) -> FrameEvent:
+    """Poll `lines` (the `_debug_log_buffer`) until a FrameEvent with
+    `name=expected_name` appears after the call started. Raises TimeoutError
+    with context if it doesn't arrive in `timeout_s`.
+
+    `reason` optionally filters to events matching a specific cause
+    (e.g. `"fn_f1"`, `"next"`, `"rebuild"`).
+    """
+    start_idx = len(lines)
+    deadline = time.monotonic() + timeout_s
+    last: FrameEvent | None = None
+    while time.monotonic() < deadline:
+        # Scan only lines appended since we started waiting.
+        for line in lines[start_idx:]:
+            evt = FrameEvent.parse(line)
+            if evt is None:
+                continue
+            last = evt
+            if evt.name == expected_name and (reason is None or evt.reason == reason):
+                return evt
+        time.sleep(poll_interval_s)
+
+    seen = [e.name for e in iter_frame_events(lines[start_idx:])]
+    raise TimeoutError(
+        f"frame name={expected_name!r} reason={reason!r} not seen in {timeout_s}s; "
+        f"saw {len(seen)} transition(s): {seen!r}; last={last!r}"
+    )
+
+
+def wait_for_any_frame(
+    lines: list[str],
+    *,
+    timeout_s: float = 5.0,
+    poll_interval_s: float = 0.1,
+) -> FrameEvent:
+    """Wait for ANY frame transition to appear after call-start. Useful for
+    `no-op` tests that want to confirm a transition did NOT happen (via
+    TimeoutError) vs. one that did.
+    """
+    start_idx = len(lines)
+    deadline = time.monotonic() + timeout_s
+    while time.monotonic() < deadline:
+        for line in lines[start_idx:]:
+            evt = FrameEvent.parse(line)
+            if evt is not None:
+                return evt
+        time.sleep(poll_interval_s)
+    raise TimeoutError(f"no frame transition in {timeout_s}s")
+
+
+def wait_for_reason(
+    lines: list[str],
+    reason: str,
+    *,
+    timeout_s: float = 5.0,
+    poll_interval_s: float = 0.1,
+) -> FrameEvent:
+    """Wait for a frame event with `reason=<reason>` after call-start.
+
+    Matches only on `reason` — useful when the caller knows *why* a
+    transition should happen (e.g. `fn_f1`, `rebuild`) but not which named
+    frame the firmware will land on for this particular board.
+    """
+    start_idx = len(lines)
+    deadline = time.monotonic() + timeout_s
+    last: FrameEvent | None = None
+    while time.monotonic() < deadline:
+        for line in lines[start_idx:]:
+            evt = FrameEvent.parse(line)
+            if evt is None:
+                continue
+            last = evt
+            if evt.reason == reason:
+                return evt
+        time.sleep(poll_interval_s)
+    raise TimeoutError(
+        f"no frame with reason={reason!r} in {timeout_s}s; last={last!r}"
+    )
+
+
+def assert_no_frame_change(
+    lines: list[str],
+    *,
+    wait_s: float = 2.0,
+) -> None:
+    """Assert that NO new FrameEvent lines arrive within `wait_s`.
+
+    Used by idempotency / no-op tests (e.g. BACK on home frame).
+    """
+    start_idx = len(lines)
+    time.sleep(wait_s)
+    new = [
+        e for e in (FrameEvent.parse(ln) for ln in lines[start_idx:]) if e is not None
+    ]
+    if new:
+        raise AssertionError(
+            f"expected no frame change in {wait_s}s, but saw {len(new)} event(s): "
+            f"{[(e.reason, e.name) for e in new]!r}"
+        )
+
+
+__all__ = [
+    "FRAME_RE",
+    "FrameEvent",
+    "assert_no_frame_change",
+    "get_current_frame",
+    "iter_frame_events",
+    "wait_for_any_frame",
+    "wait_for_frame",
+    "wait_for_reason",
+]

mcp-server/tests/ui/conftest.py

@@ -0,0 +1,381 @@
+"""UI-tier fixtures: camera lifecycle, OCR warmup, per-test frame capture,
+and a `ui_home_state` autouse guard that resets to the home frame before
+every test (prevents state bleed if a prior test exited inside a menu).
+
+The camera + OCR modules live in `meshtastic_mcp/{camera,ocr}.py` (production
+code, so the `capture_screen` MCP tool can share them). These fixtures wire
+them into pytest + write per-test captures to `tests/ui_captures/…`.
+"""
+
+from __future__ import annotations
+
+import re
+import shutil
+import time
+from pathlib import Path
+from typing import Any, Iterator
+
+import pytest
+from meshtastic_mcp import admin as admin_mod
+from meshtastic_mcp import camera as camera_mod
+from meshtastic_mcp import ocr as ocr_mod
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import FrameEvent, get_current_frame, wait_for_frame
+
+# Roles that carry a screen the UI tier can drive. Only esp32s3 (heltec-v3
+# SSD1306) qualifies today — nrf52 (rak4631) has no display.
+UI_CAPABLE_ROLES = ("esp32s3",)
+
+# Where per-test captures land. One subdirectory per session seed, then per
+# sanitized test nodeid — identical pattern to other pytest artifacts.
+CAPTURES_ROOT = Path(__file__).resolve().parent.parent / "ui_captures"
+
+
+def _sanitize_nodeid(nodeid: str) -> str:
+    return re.sub(r"[^a-zA-Z0-9_.-]+", "_", nodeid)
+
+
+# ---------- Role gating ----------------------------------------------------
+
+
+@pytest.fixture
+def ui_capable_role(request: pytest.FixtureRequest, hub_devices: dict[str, Any]) -> str:
+    """Resolve the single role the UI tier drives.
+
+    Today that's `esp32s3`. Skips if the hub doesn't have one. A future
+    multi-screen hub could pick a role per parametrization.
+    """
+    for role in UI_CAPABLE_ROLES:
+        if role in hub_devices:
+            return role
+    pytest.skip(
+        f"no UI-capable role on hub; need one of {UI_CAPABLE_ROLES} in {sorted(hub_devices)}"
+    )
+
+
+@pytest.fixture
+def ui_port(ui_capable_role: str, hub_devices: dict[str, Any]) -> str:
+    port = (
+        hub_devices[ui_capable_role].get("port")
+        if isinstance(hub_devices[ui_capable_role], dict)
+        else hub_devices[ui_capable_role]
+    )
+    if not port:
+        pytest.skip(f"{ui_capable_role!r} has no usable port")
+    return port
+
+
+# ---------- Camera + OCR session fixtures ---------------------------------
+
+
+@pytest.fixture(scope="session")
+def camera(ui_capable_role_session: str | None) -> Iterator[camera_mod.CameraBackend]:
+    """Session-scoped camera backend. Closed at teardown.
+
+    Backend + device selected by env vars (see `meshtastic_mcp.camera`).
+    Falls through to `NullBackend` when no camera is configured, so the
+    tests run end-to-end on machines without hardware; they just won't
+    have useful images.
+    """
+    role = ui_capable_role_session or "esp32s3"
+    cam = camera_mod.get_camera(role)
+    try:
+        yield cam
+    finally:
+        cam.close()
+
+
+@pytest.fixture(scope="session")
+def ui_capable_role_session(hub_devices: dict[str, Any]) -> str | None:
+    """Session-scoped lookup mirroring `ui_capable_role` but non-skipping.
+
+    Used by the `camera` session fixture so it doesn't depend on a
+    test-scoped skip.
+    """
+    for role in UI_CAPABLE_ROLES:
+        if role in hub_devices:
+            return role
+    return None
+
+
+@pytest.fixture(scope="session", autouse=True)
+def _ocr_warm() -> None:
+    """Pay easyocr's ~100 MB / cold-start cost ONCE per session.
+
+    Subsequent `ocr_text()` calls hit the cached reader and return quickly.
+    Swallows errors — if OCR isn't installed, warm is a no-op.
+    """
+    try:
+        ocr_mod.warm()
+    except Exception:  # noqa: BLE001 — belt: never block the suite on OCR init
+        pass
+
+
+@pytest.fixture(scope="session")
+def _ui_screen_kept_on(
+    ui_capable_role_session: str | None, hub_devices: dict[str, Any]
+) -> Iterator[None]:
+    """Keep the OLED on throughout the UI tier so input events aren't dropped.
+
+    Why: `InputBroker::handleInputEvent` (src/input/InputBroker.cpp:118-122)
+    silently DROPS any event that arrives while the screen is off — it just
+    wakes the screen and returns. Every first event in each test would
+    disappear. We set `display.screen_on_secs = 86400` at session start
+    (effectively "always on" for the test window) and restore the prior
+    value at teardown.
+    """
+    if ui_capable_role_session is None:
+        yield
+        return
+
+    hub_entry = hub_devices[ui_capable_role_session]
+    port = hub_entry.get("port") if isinstance(hub_entry, dict) else hub_entry
+    if not port:
+        yield
+        return
+
+    original: int | None = None
+    try:
+        current = admin_mod.get_config(section="display", port=port)
+        original = int(
+            current.get("config", {}).get("display", {}).get("screen_on_secs") or 0
+        )
+    except Exception:  # noqa: BLE001
+        pass
+
+    try:
+        admin_mod.set_config("display.screen_on_secs", 86400, port=port)
+        # Send one wake event so the screen is actually ON going into the
+        # first test. The event itself gets dropped (screenWasOff), but the
+        # wake side-effect sticks.
+        try:
+            admin_mod.send_input_event(event_code=int(InputEventCode.FN_F1), port=port)
+        except Exception:  # noqa: BLE001
+            pass
+        time.sleep(1.5)  # Let the screen finish its wake transition.
+    except (
+        Exception
+    ):  # noqa: BLE001 — best-effort; ui_home_state surfaces the real error
+        pass
+
+    try:
+        yield
+    finally:
+        if original is not None:
+            try:
+                admin_mod.set_config("display.screen_on_secs", original, port=port)
+            except Exception:  # noqa: BLE001
+                pass
+
+
+# ---------- Per-test capture + transcript ----------------------------------
+
+
+class FrameCapture:
+    """Per-test capture recorder. Created once per test via the
+    `frame_capture` fixture; call with a label to snapshot the screen.
+    """
+
+    def __init__(
+        self,
+        cam: camera_mod.CameraBackend,
+        dir_path: Path,
+        lines: list[str],
+        nodeid: str,
+    ) -> None:
+        self._cam = cam
+        self._dir = dir_path
+        self._lines = lines
+        self._nodeid = nodeid
+        self._step = 0
+        self.captures: list[dict[str, Any]] = []
+        self._transcript_path = dir_path / "transcript.md"
+        self._dir.mkdir(parents=True, exist_ok=True)
+        self._transcript_path.write_text(
+            f"# {nodeid} — {time.strftime('%Y-%m-%dT%H:%M:%SZ', time.gmtime())}\n\n",
+            encoding="utf-8",
+        )
+
+    def __call__(self, label: str) -> dict[str, Any]:
+        self._step += 1
+        stem = f"{self._step:03d}-{re.sub(r'[^a-zA-Z0-9_-]+', '-', label)}"
+        png_path = self._dir / f"{stem}.png"
+        ocr_path = self._dir / f"{stem}.ocr.txt"
+
+        try:
+            png = self._cam.capture()
+        except Exception as exc:  # noqa: BLE001
+            png = b""
+            ocr_str = f"[capture error: {exc}]"
+        else:
+            camera_mod.save_capture(png, png_path)
+            try:
+                ocr_str = ocr_mod.ocr_text(png)
+            except Exception as exc:  # noqa: BLE001
+                ocr_str = f"[ocr error: {exc}]"
+            ocr_path.write_text(ocr_str or "", encoding="utf-8")
+
+        frame = get_current_frame(self._lines)
+        entry: dict[str, Any] = {
+            "step": self._step,
+            "label": label,
+            "png_path": str(png_path) if png else None,
+            "ocr_text": ocr_str,
+            "frame": (
+                {
+                    "idx": frame.idx,
+                    "name": frame.name,
+                    "reason": frame.reason,
+                }
+                if frame is not None
+                else None
+            ),
+        }
+        self.captures.append(entry)
+
+        with self._transcript_path.open("a", encoding="utf-8") as fh:
+            frame_str = (
+                f"frame {frame.idx}/{frame.count} name={frame.name} reason={frame.reason}"
+                if frame is not None
+                else "frame <none>"
+            )
+            ocr_summary = (ocr_str or "").replace("\n", " / ")[:80]
+            fh.write(
+                f"{self._step}. **{label}** — {frame_str} — OCR: `{ocr_summary}`\n"
+            )
+        return entry
+
+
+@pytest.fixture
+def frame_capture(
+    request: pytest.FixtureRequest,
+    camera: camera_mod.CameraBackend,
+    session_seed: str,
+) -> Iterator[FrameCapture]:
+    nodeid = _sanitize_nodeid(request.node.nodeid)
+    dir_path = CAPTURES_ROOT / session_seed / nodeid
+    # Fresh directory per test run so reruns don't mix old and new images.
+    if dir_path.exists():
+        shutil.rmtree(dir_path)
+
+    lines = getattr(request.node, "_debug_log_buffer", [])
+    fc = FrameCapture(camera, dir_path, lines, nodeid)
+    # Stash so pytest_runtest_makereport can embed captures in HTML extras.
+    request.node._ui_captures = fc.captures  # type: ignore[attr-defined]
+    yield fc
+
+
+# ---------- Pre-test home-state reset --------------------------------------
+
+
+def _send_event(port: str, event: InputEventCode) -> None:
+    try:
+        admin_mod.send_input_event(event_code=int(event), port=port)
+    except Exception:  # noqa: BLE001
+        # Treat a failed event as soft — the subsequent frame-log assertion
+        # surfaces the real problem with better context.
+        pass
+
+
+@pytest.fixture(autouse=True)
+def ui_home_state(
+    request: pytest.FixtureRequest,
+    hub_devices: dict[str, Any],
+    _ui_screen_kept_on: None,
+) -> Iterator[None]:
+    """Before every UI test, jump to frame 0 (usually `home`) via FN_F1 and
+    confirm the device emitted the expected frame log.
+
+    Why FN_F1 (not BACK): FN_F1 maps to `switchToFrame(0)` and ALWAYS
+    produces a `reason=fn_f1` log line, regardless of whatever frame the
+    prior test left us on. BACK is context-sensitive (dismisses overlays
+    on some frames, no-op on others) and can silently fail to transition.
+
+    This fixture doubles as the macro-presence detector: if no `fn_f1`
+    log arrives within 5 s, the firmware almost certainly wasn't baked
+    with `USERPREFS_UI_TEST_LOG`. Skip the tier with an actionable hint
+    instead of letting every test body fail with a confusing assertion.
+
+    Autouse scope is restricted to `tests/ui/` by virtue of this fixture
+    living in that directory's conftest.py — no explicit nodeid guard
+    needed (and earlier attempts at one were wrong, matching `/tests/ui/`
+    against a nodeid that has no leading slash).
+    """
+    role = next((r for r in UI_CAPABLE_ROLES if r in hub_devices), None)
+    if role is None:
+        yield
+        return
+
+    hub_entry = hub_devices[role]
+    port = hub_entry.get("port") if isinstance(hub_entry, dict) else hub_entry
+    lines: list[str] = getattr(request.node, "_debug_log_buffer", [])
+    start_len = len(lines)
+
+    # First: a wake event. The screen should already be kept on by
+    # `_ui_screen_kept_on`, but belt + suspenders — if it somehow
+    # powered off (sleep after factory_reset, etc.), this first FN_F1
+    # gets dropped by InputBroker's screenWasOff guard. That's fine;
+    # the second FN_F1 below lands cleanly.
+    _send_event(port, InputEventCode.FN_F1)
+    time.sleep(0.4)
+    _send_event(port, InputEventCode.FN_F1)
+
+    # Wait for the fn_f1 transition log. Any new `reason=fn_f1` line
+    # after call-start counts — we don't care about the name (it should
+    # be `home` or `deviceFocused` depending on board-specific frame order).
+    from ._screen_log import wait_for_reason
+
+    try:
+        wait_for_reason(lines, "fn_f1", timeout_s=5.0)
+    except TimeoutError:
+        # One more try — FreeRTOS queue may be draining slowly.
+        _send_event(port, InputEventCode.FN_F1)
+        try:
+            wait_for_reason(lines, "fn_f1", timeout_s=5.0)
+        except TimeoutError:
+            # Look at what the _debug_log_buffer actually contains to
+            # disambiguate "macro off" from "macro on but event lost".
+            frame_lines = [ln for ln in lines[start_len:] if "Screen: frame" in ln]
+            processing_lines = [
+                ln for ln in lines[start_len:] if "Processing input event" in ln
+            ]
+            if frame_lines:
+                pytest.skip(
+                    f"ui_home_state: events fire but none reach Screen "
+                    f"(saw {len(frame_lines)} frame line(s), "
+                    f"{len(processing_lines)} admin inject(s)). "
+                    f"Device may be in an unusual state — try `--force-bake`."
+                )
+            else:
+                pytest.skip(
+                    "ui_home_state: no `Screen: frame` log after FN_F1. "
+                    "Firmware not baked with USERPREFS_UI_TEST_LOG — "
+                    "run with `--force-bake` to reflash, or verify the "
+                    "macro is active in the bake."
+                )
+    yield
+
+
+# ---------- Small helpers reused by tests ---------------------------------
+
+
+def send_event(
+    port: str, event: InputEventCode | int | str, **kwargs: Any
+) -> dict[str, Any]:
+    """Thin wrapper so tests read `send_event(port, InputEventCode.RIGHT)`."""
+    return admin_mod.send_input_event(event_code=event, port=port, **kwargs)
+
+
+__all__ = [
+    "FrameCapture",
+    "UI_CAPABLE_ROLES",
+    "send_event",
+    "wait_for_frame",
+    "FrameEvent",
+]
+
+
+# Make the helpers discoverable to test modules via `from .conftest import …`.
+# pytest auto-loads conftest.py, but the symbols above are also re-exported
+# for readability in the test files.

mcp-server/tests/ui/test_input_fn_jump.py

@@ -0,0 +1,61 @@
+"""FN_F1..F5 directly jumps to frame 0..4 via Screen::handleInputEvent.
+
+Parametrized over the 5 function keys. Each expects a
+`Screen: frame <idx>/<count> name=... reason=fn_f<k>` log line, with
+`idx == k-1`. We don't hardcode the frame *name* because the layout
+depends on which modules are compiled in for this board.
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import get_current_frame, wait_for_reason
+from .conftest import FrameCapture, send_event
+
+
+@pytest.mark.timeout(120)
+@pytest.mark.parametrize(
+    "event,expected_idx,reason",
+    [
+        (InputEventCode.FN_F1, 0, "fn_f1"),
+        (InputEventCode.FN_F2, 1, "fn_f2"),
+        (InputEventCode.FN_F3, 2, "fn_f3"),
+        (InputEventCode.FN_F4, 3, "fn_f4"),
+        (InputEventCode.FN_F5, 4, "fn_f5"),
+    ],
+    ids=["FN_F1", "FN_F2", "FN_F3", "FN_F4", "FN_F5"],
+)
+def test_fn_jump_direct_frame(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+    event: InputEventCode,
+    expected_idx: int,
+    reason: str,
+) -> None:
+    lines: list[str] = request.node._debug_log_buffer
+    start = get_current_frame(lines)
+    assert start is not None, "no frame log yet — USERPREFS_UI_TEST_LOG not wired?"
+    assert start.name in (
+        "home",
+        "deviceFocused",
+    ), f"setup expected frame 0 landing, got {start.name!r}"
+    frame_capture("initial")
+
+    if start.count <= expected_idx:
+        pytest.skip(
+            f"device has {start.count} frames; FN_F{expected_idx + 1} needs > {expected_idx}"
+        )
+
+    send_event(ui_port, event)
+    time.sleep(0.1)
+    evt = wait_for_reason(lines, reason, timeout_s=5.0)
+    assert evt.idx == expected_idx, (
+        f"FN_F{expected_idx + 1} expected idx={expected_idx}, got {evt.idx} "
+        f"(name={evt.name}, count={evt.count})"
+    )
+    frame_capture(f"after-{reason}")

mcp-server/tests/ui/test_input_fn_oob.py

@@ -0,0 +1,61 @@
+"""Out-of-bounds FN_F5 when the device has <5 frames: no crash, idx unchanged.
+
+`Screen::handleInputEvent` dispatches FN_F5 unconditionally to
+`ui->switchToFrame(4)`. The OLEDDisplayUi library typically clamps or
+silently ignores out-of-range indices, but firmware bugs have existed
+here — this test protects against a regression that would wedge the UI.
+
+If this test fails, first check: did the device actually crash (Guru
+Meditation in the log)? Or did switchToFrame accept an OOB index and
+leave the UI blank?
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import get_current_frame, wait_for_reason
+from .conftest import FrameCapture, send_event
+
+
+@pytest.mark.timeout(90)
+def test_fn_f5_out_of_bounds(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+) -> None:
+    lines: list[str] = request.node._debug_log_buffer
+    start = get_current_frame(lines)
+    assert start is not None
+
+    if start.count > 5:
+        pytest.skip(
+            f"device has {start.count} frames; FN_F5 is in-bounds — not testing OOB here"
+        )
+
+    frame_capture("initial-home")
+    send_event(ui_port, InputEventCode.FN_F5)
+    time.sleep(0.5)
+
+    try:
+        wait_for_reason(lines, "fn_f5", timeout_s=3.0)
+    except TimeoutError:
+        # Firmware may have ignored the event entirely — acceptable.
+        pass
+
+    # Capture whatever is on screen (OCR will tell us if something weird
+    # happened). Device must remain responsive — subsequent events should
+    # still land.
+    frame_capture("after-fn_f5-oob")
+
+    # Send a RIGHT to confirm the UI is still alive. If this times out,
+    # the OOB switchToFrame wedged the UI.
+    send_event(ui_port, InputEventCode.RIGHT)
+    post = wait_for_reason(lines, "next", timeout_s=5.0)
+    assert (
+        post is not None
+    ), "UI wedged after OOB FN_F5 — RIGHT no longer produces frame log"
+    frame_capture("after-recovery-right")

mcp-server/tests/ui/test_input_menu.py

@@ -0,0 +1,68 @@
+"""SELECT on the home frame opens the home menu; BACK closes it.
+
+The home menu is an overlay (menuHandler::homeBaseMenu), not a frame
+transition — so we verify via OCR difference between before/after
+captures rather than a `Screen: frame` log line. The underlying
+mechanism is still InputBroker → Screen::handleInputEvent → menu
+callback.
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import get_current_frame
+from .conftest import FrameCapture, send_event
+
+
+@pytest.mark.timeout(120)
+def test_select_opens_home_menu(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+) -> None:
+    lines: list[str] = request.node._debug_log_buffer
+    start = get_current_frame(lines)
+    assert start is not None
+    if start.name not in ("home", "deviceFocused"):
+        pytest.skip(
+            f"SELECT on {start.name!r} doesn't open homeBaseMenu; "
+            "test is only valid when the landing frame is home/deviceFocused"
+        )
+
+    initial = frame_capture("initial")
+    send_event(ui_port, InputEventCode.SELECT)
+    time.sleep(0.8)
+    opened = frame_capture("after-select")
+
+    # The menu is an overlay (not a frame change). We cannot use log
+    # assertion — instead, OCR should differ because a menu list is now
+    # drawn on top.
+    initial_text = (initial.get("ocr_text") or "").strip()
+    opened_text = (opened.get("ocr_text") or "").strip()
+    if initial_text and opened_text:
+        # When OCR is available, require *some* difference between the two
+        # frames — even a single menu title changes the transcribed text.
+        assert initial_text != opened_text, (
+            f"expected OCR diff after SELECT; both read {initial_text!r}. "
+            "If both are empty, check camera alignment + OCR backend."
+        )
+
+    # Back out — the menu dismisses on BACK.
+    send_event(ui_port, InputEventCode.BACK)
+    time.sleep(0.8)
+    closed = frame_capture("after-back")
+
+    # Soft check: OCR after BACK should look different from the menu
+    # (either back to home or onto a previous frame — BACK's exact
+    # behavior when the menu is up vs. not-up varies). We don't assert
+    # equality because OLED rendering is pixel-stable but camera sampling
+    # introduces noise.
+    if opened_text and closed.get("ocr_text"):
+        close_text = (closed.get("ocr_text") or "").strip()
+        assert (
+            close_text != opened_text
+        ), f"after BACK, OCR still looks like the menu: {close_text!r}"

mcp-server/tests/ui/test_input_message_scroll.py

@@ -0,0 +1,60 @@
+"""Once we navigate to the textMessage frame, UP/DOWN exercises the
+message-scroll path (or opens CannedMessages on empty devices).
+
+Weaker than a "no frame change" assertion because on a fresh bench
+device the message store is usually empty, and the firmware's UP
+handler in that case launches CannedMessage — which DOES rebuild
+frames. We just verify the path doesn't crash + produce captures for
+visual inspection.
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import get_current_frame, wait_for_frame
+from .conftest import FrameCapture, send_event
+
+
+@pytest.mark.timeout(180)
+def test_up_down_on_textmessage_survives(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+) -> None:
+    lines: list[str] = request.node._debug_log_buffer
+    frame_capture("initial")
+
+    # Walk RIGHT until we land on textMessage — up to 15 hops.
+    for _i in range(15):
+        send_event(ui_port, InputEventCode.RIGHT)
+        time.sleep(0.3)
+        current = get_current_frame(lines)
+        if current is not None and current.name == "textMessage":
+            break
+    else:
+        pytest.skip(
+            "couldn't reach textMessage frame within 15 RIGHTs — not present on this board"
+        )
+
+    wait_for_frame(lines, "textMessage", timeout_s=5.0)
+    frame_capture("on-textMessage")
+
+    # UP and DOWN exercise the message-scroll / canned-message-launch path.
+    # Capture after each so the HTML report shows any visual effect.
+    send_event(ui_port, InputEventCode.UP)
+    time.sleep(0.3)
+    frame_capture("after-up")
+
+    send_event(ui_port, InputEventCode.DOWN)
+    time.sleep(0.3)
+    frame_capture("after-down")
+
+    # Soft check: we should still be in a reachable frame (not wedged).
+    # The next test's `ui_home_state` will error out if the device is
+    # unresponsive, so we don't need a stricter guarantee here.
+    final = get_current_frame(lines)
+    assert final is not None, "no frame log after UP/DOWN — event path broke"

mcp-server/tests/ui/test_input_navigation.py

@@ -0,0 +1,93 @@
+"""INPUT_BROKER_RIGHT cycles forward through frames; INPUT_BROKER_LEFT backs.
+
+The simplest UI test: fire N RIGHT events and assert the frame index
+moves forward by N (modulo frameCount). Each step captures an image +
+OCR for the HTML report.
+"""
+
+from __future__ import annotations
+
+import time
+from typing import Any
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import get_current_frame, wait_for_frame
+from .conftest import FrameCapture, send_event
+
+
+@pytest.mark.timeout(120)
+def test_input_right_cycles_frames(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+) -> None:
+    lines: list[str] = request.node._debug_log_buffer
+    start = get_current_frame(lines)
+    assert start is not None, "no frame log yet — USERPREFS_UI_TEST_LOG not wired?"
+    # FN_F1 in ui_home_state lands on frame 0. The name at frame 0 varies
+    # by board (home on heltec-v3, deviceFocused on others) — accept either.
+    assert start.name in (
+        "home",
+        "deviceFocused",
+    ), f"setup expected home/deviceFocused at frame 0, got {start.name!r}"
+
+    frame_capture("initial")
+    visited = [start.idx]
+
+    for step in range(4):
+        send_event(ui_port, InputEventCode.RIGHT)
+        # Each RIGHT should bump the frame index by 1. The log fires with
+        # `reason=next` from showFrame(NEXT).
+        before_count = len(list(_frame_events(lines)))
+        deadline = time.monotonic() + 5.0
+        while time.monotonic() < deadline:
+            if len(list(_frame_events(lines))) > before_count:
+                break
+            time.sleep(0.1)
+        evt = get_current_frame(lines)
+        assert evt is not None
+        assert (
+            evt.reason == "next"
+        ), f"step {step}: expected reason=next, got {evt.reason!r}"
+        visited.append(evt.idx)
+        frame_capture(f"after-right-{step + 1}")
+
+    # Sanity: each index should differ from its predecessor.
+    diffs = [visited[i + 1] - visited[i] for i in range(len(visited) - 1)]
+    assert all(
+        d in (1, -(start.count - 1)) for d in diffs
+    ), f"expected monotonic +1 steps (or a wrap), got visited={visited} diffs={diffs}"
+
+
+@pytest.mark.timeout(120)
+def test_input_left_returns_to_home(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+) -> None:
+    """After RIGHT×3 + LEFT×3, we should end up back on the starting frame."""
+    lines: list[str] = request.node._debug_log_buffer
+    start = get_current_frame(lines)
+    assert start is not None
+    start_name = start.name
+    frame_capture("initial")
+    for _ in range(3):
+        send_event(ui_port, InputEventCode.RIGHT)
+        time.sleep(0.3)
+    frame_capture("after-right-3")
+
+    for _ in range(3):
+        send_event(ui_port, InputEventCode.LEFT)
+        time.sleep(0.3)
+
+    # Back to whichever frame we started on (home or deviceFocused).
+    wait_for_frame(lines, start_name, timeout_s=5.0)
+    frame_capture(f"after-left-3-back-{start_name}")
+
+
+def _frame_events(lines: list[str]) -> Any:
+    from ._screen_log import iter_frame_events
+
+    return iter_frame_events(lines)

mcp-server/tests/ui/test_input_node_scroll.py

@@ -0,0 +1,51 @@
+"""On the nodelist_nodes frame, UP/DOWN scrolls the list via
+`NodeListRenderer::scrollUp/scrollDown` (src/graphics/Screen.cpp:1779-1788).
+The firmware returns 0 before notifying observers, so no frame-change
+log fires. Verify the path doesn't crash and we stay on nodelist_nodes.
+"""
+
+from __future__ import annotations
+
+import time
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode
+
+from ._screen_log import assert_no_frame_change, get_current_frame, wait_for_frame
+from .conftest import FrameCapture, send_event
+
+
+@pytest.mark.timeout(180)
+def test_up_down_on_nodelist_no_frame_change(
+    ui_port: str,
+    frame_capture: FrameCapture,
+    request: pytest.FixtureRequest,
+) -> None:
+    lines: list[str] = request.node._debug_log_buffer
+    frame_capture("initial")
+
+    # Walk RIGHT until we land on nodelist_nodes.
+    for _i in range(15):
+        send_event(ui_port, InputEventCode.RIGHT)
+        time.sleep(0.3)
+        current = get_current_frame(lines)
+        if current is not None and current.name == "nodelist_nodes":
+            break
+    else:
+        pytest.skip("couldn't reach nodelist_nodes within 15 RIGHTs")
+
+    wait_for_frame(lines, "nodelist_nodes", timeout_s=5.0)
+    frame_capture("on-nodelist")
+
+    # UP/DOWN on nodelist scroll internally + `return 0` before
+    # notifyObservers — no frame-change log. Verify.
+    send_event(ui_port, InputEventCode.UP)
+    assert_no_frame_change(lines, wait_s=1.5)
+    send_event(ui_port, InputEventCode.DOWN)
+    assert_no_frame_change(lines, wait_s=1.5)
+
+    final = get_current_frame(lines)
+    assert (
+        final is not None and final.name == "nodelist_nodes"
+    ), f"UP/DOWN moved us off nodelist_nodes; now on {final!r}"
+    frame_capture("after-up-down")

mcp-server/tests/unit/test_input_event_codes.py

@@ -0,0 +1,90 @@
+"""Pin `InputEventCode` values to the firmware `input_broker_event` enum.
+
+If this test fails, someone changed the firmware enum (or this Python
+mirror) and they must stay in sync — the admin RPC sends these as u8
+wire values directly.
+
+Also exercises `coerce_event_code` for the happy + error paths.
+"""
+
+from __future__ import annotations
+
+import pytest
+from meshtastic_mcp.input_events import InputEventCode, coerce_event_code
+
+
+class TestInputEventCodeValues:
+    """These values MUST match src/input/InputBroker.h exactly."""
+
+    def test_navigation_keys(self) -> None:
+        assert int(InputEventCode.UP) == 17
+        assert int(InputEventCode.DOWN) == 18
+        assert int(InputEventCode.LEFT) == 19
+        assert int(InputEventCode.RIGHT) == 20
+
+    def test_action_keys(self) -> None:
+        assert int(InputEventCode.SELECT) == 10
+        assert int(InputEventCode.CANCEL) == 24
+        assert int(InputEventCode.BACK) == 27
+
+    def test_long_press_variants(self) -> None:
+        assert int(InputEventCode.SELECT_LONG) == 11
+        assert int(InputEventCode.UP_LONG) == 12
+        assert int(InputEventCode.DOWN_LONG) == 13
+
+    def test_fn_keys(self) -> None:
+        assert int(InputEventCode.FN_F1) == 0xF1
+        assert int(InputEventCode.FN_F2) == 0xF2
+        assert int(InputEventCode.FN_F3) == 0xF3
+        assert int(InputEventCode.FN_F4) == 0xF4
+        assert int(InputEventCode.FN_F5) == 0xF5
+
+    def test_system_events(self) -> None:
+        assert int(InputEventCode.SHUTDOWN) == 0x9B
+        assert int(InputEventCode.GPS_TOGGLE) == 0x9E
+        assert int(InputEventCode.SEND_PING) == 0xAF
+
+    def test_auto_increment_block(self) -> None:
+        # C enum: `BACK = 27, USER_PRESS, ALT_PRESS, ALT_LONG` → 28, 29, 30.
+        assert int(InputEventCode.USER_PRESS) == 28
+        assert int(InputEventCode.ALT_PRESS) == 29
+        assert int(InputEventCode.ALT_LONG) == 30
+
+
+class TestCoerceEventCode:
+    def test_int_passthrough(self) -> None:
+        assert coerce_event_code(20) == 20
+        assert coerce_event_code(0) == 0
+        assert coerce_event_code(255) == 255
+
+    def test_enum_passthrough(self) -> None:
+        assert coerce_event_code(InputEventCode.RIGHT) == 20
+        assert coerce_event_code(InputEventCode.FN_F1) == 0xF1
+
+    def test_name_case_insensitive(self) -> None:
+        assert coerce_event_code("right") == 20
+        assert coerce_event_code("RIGHT") == 20
+        assert coerce_event_code("Right") == 20
+
+    def test_input_broker_prefix_stripped(self) -> None:
+        assert coerce_event_code("INPUT_BROKER_FN_F1") == 0xF1
+        assert coerce_event_code("input_broker_select") == 10
+
+    def test_hyphen_and_underscore_equivalence(self) -> None:
+        assert coerce_event_code("fn-f1") == 0xF1
+
+    def test_int_out_of_range_raises(self) -> None:
+        with pytest.raises(ValueError, match="u8"):
+            coerce_event_code(256)
+        with pytest.raises(ValueError, match="u8"):
+            coerce_event_code(-1)
+
+    def test_unknown_name_raises(self) -> None:
+        with pytest.raises(ValueError, match="unknown event code name"):
+            coerce_event_code("NOT_A_KEY")
+
+    def test_wrong_type_raises(self) -> None:
+        with pytest.raises(TypeError):
+            coerce_event_code(1.5)  # type: ignore[arg-type]
+        with pytest.raises(TypeError):
+            coerce_event_code(None)  # type: ignore[arg-type]

mcp-server/tests/unit/test_uhubctl_parser.py

@@ -0,0 +1,148 @@
+"""Pin the `uhubctl` default-output parser against canned real-world samples.
+
+uhubctl's output format has been stable since v2.x but occasionally adds
+new hub-descriptor fields (e.g. the `, ppps` marker). The parser uses loose
+regexes to tolerate additions; this test keeps us honest.
+
+Samples captured from:
+- v2.6.0 on macOS (Homebrew) — two USB2 hubs, one populated with an
+  nRF52 and a CP2102, plus chained USB3 hubs.
+- v2.5.0 on Linux (hypothetical — reconstructed from the project README).
+"""
+
+from __future__ import annotations
+
+import pytest
+from meshtastic_mcp.uhubctl import (
+    ROLE_VIDS,
+    UhubctlError,
+    parse_list_output,
+)
+
+# Actual `uhubctl` stdout on the developer's macOS bench, Apr 2026.
+_SAMPLE_MACOS_V26 = """\
+Current status for hub 1-1.3 [2109:2817 VIA Labs, Inc. USB2.0 Hub, USB 2.10, 4 ports, ppps]
+  Port 1: 0100 power
+  Port 2: 0103 power enable connect [239a:8029 RAKwireless WisCore RAK4631 Board 920456B1E6972262]
+  Port 3: 0103 power enable connect [10c4:ea60 Silicon Labs CP2102 USB to UART Bridge Controller 0001]
+  Port 4: 0100 power
+Current status for hub 1-2.3 [2109:0817 VIA Labs, Inc. USB3.0 Hub, USB 3.10, 4 ports, ppps]
+  Port 1: 02a0 power 5gbps Rx.Detect
+  Port 2: 02a0 power 5gbps Rx.Detect
+  Port 3: 02a0 power 5gbps Rx.Detect
+  Port 4: 02a0 power 5gbps Rx.Detect
+Current status for hub 1-1 [2109:2817 VIA Labs, Inc. USB2.0 Hub, USB 2.10, 4 ports, ppps]
+  Port 1: 0100 power
+  Port 2: 0100 power
+  Port 3: 0503 power highspeed enable connect [2109:2817 VIA Labs, Inc. USB2.0 Hub, USB 2.10, 4 ports, ppps]
+  Port 4: 0100 power
+"""
+
+
+# Minimal Linux-style sample (fewer hubs, shows a non-PPPS hub).
+_SAMPLE_LINUX_NONPPPS = """\
+Current status for hub 2-1.4 [05e3:0608 GenesysLogic USB2.1 Hub, USB 2.10, 4 ports]
+  Port 1: 0507 power highspeed suspend enable connect [239a:0029 Adafruit Feather Bootloader]
+  Port 2: 0100 power
+  Port 3: 0100 power
+  Port 4: 0100 power
+"""
+
+
+class TestParseListOutput:
+    def test_parses_macos_sample_hub_count(self) -> None:
+        hubs = parse_list_output(_SAMPLE_MACOS_V26)
+        assert len(hubs) == 3
+
+    def test_parses_hub_location_and_vid(self) -> None:
+        hubs = parse_list_output(_SAMPLE_MACOS_V26)
+        via_hub = hubs[0]
+        assert via_hub["location"] == "1-1.3"
+        assert via_hub["vid"] == 0x2109
+        assert via_hub["pid"] == 0x2817
+        assert via_hub["ppps"] is True
+
+    def test_parses_port_with_device(self) -> None:
+        hubs = parse_list_output(_SAMPLE_MACOS_V26)
+        nrf52_hub = hubs[0]
+        port2 = next(p for p in nrf52_hub["ports"] if p["port"] == 2)
+        assert port2["device_vid"] == 0x239A
+        assert port2["device_pid"] == 0x8029
+        assert "RAKwireless" in port2["device_desc"]
+
+    def test_empty_port_has_no_device(self) -> None:
+        hubs = parse_list_output(_SAMPLE_MACOS_V26)
+        nrf52_hub = hubs[0]
+        port1 = next(p for p in nrf52_hub["ports"] if p["port"] == 1)
+        assert port1["device_vid"] is None
+        assert port1["device_pid"] is None
+        assert port1["device_desc"] is None
+
+    def test_ports_count(self) -> None:
+        hubs = parse_list_output(_SAMPLE_MACOS_V26)
+        for hub in hubs:
+            assert len(hub["ports"]) == 4  # each sample hub has 4 ports
+
+    def test_non_ppps_hub_flagged(self) -> None:
+        hubs = parse_list_output(_SAMPLE_LINUX_NONPPPS)
+        assert len(hubs) == 1
+        assert hubs[0]["ppps"] is False
+
+    def test_handles_empty_input(self) -> None:
+        assert parse_list_output("") == []
+
+    def test_handles_malformed_lines_gracefully(self) -> None:
+        # Lines that don't match HUB_RE or PORT_RE are ignored silently.
+        garbage = "uhubctl: warning: something weird\n" + _SAMPLE_LINUX_NONPPPS
+        hubs = parse_list_output(garbage)
+        assert len(hubs) == 1
+
+
+class TestRoleVids:
+    def test_nrf52_mapped(self) -> None:
+        assert 0x239A in ROLE_VIDS["nrf52"]
+
+    def test_esp32s3_covers_both_vids(self) -> None:
+        # Espressif native USB + CP2102 USB-UART on heltec-v3 boards.
+        assert 0x303A in ROLE_VIDS["esp32s3"]
+        assert 0x10C4 in ROLE_VIDS["esp32s3"]
+
+
+class TestResolveTargetErrorPaths:
+    def test_unknown_role_raises(self, monkeypatch: pytest.MonkeyPatch) -> None:
+        from meshtastic_mcp.uhubctl import resolve_target
+
+        # Clear any env-var pinning that might make this pass accidentally.
+        for key in (
+            "MESHTASTIC_UHUBCTL_LOCATION_FLUX",
+            "MESHTASTIC_UHUBCTL_PORT_FLUX",
+        ):
+            monkeypatch.delenv(key, raising=False)
+        with pytest.raises(UhubctlError, match="unknown role"):
+            resolve_target("flux")
+
+    def test_invalid_env_port_raises(self, monkeypatch: pytest.MonkeyPatch) -> None:
+        from meshtastic_mcp.uhubctl import resolve_target
+
+        monkeypatch.setenv("MESHTASTIC_UHUBCTL_LOCATION_NRF52", "1-1.3")
+        monkeypatch.setenv("MESHTASTIC_UHUBCTL_PORT_NRF52", "not-an-int")
+        with pytest.raises(UhubctlError, match="not a valid integer"):
+            resolve_target("nrf52")
+
+    def test_env_var_pinning_wins(self, monkeypatch: pytest.MonkeyPatch) -> None:
+        from meshtastic_mcp.uhubctl import resolve_target
+
+        # Env-var pinning should NOT require uhubctl to be running / installed.
+        monkeypatch.setenv("MESHTASTIC_UHUBCTL_LOCATION_NRF52", "9-9.9")
+        monkeypatch.setenv("MESHTASTIC_UHUBCTL_PORT_NRF52", "7")
+        assert resolve_target("nrf52") == ("9-9.9", 7)
+
+    def test_normalize_role_strips_alt_suffix(
+        self, monkeypatch: pytest.MonkeyPatch
+    ) -> None:
+        from meshtastic_mcp.uhubctl import resolve_target
+
+        # esp32s3_alt collapses to esp32s3 for env-var lookup.
+        monkeypatch.setenv("MESHTASTIC_UHUBCTL_LOCATION_ESP32S3", "2-2")
+        monkeypatch.setenv("MESHTASTIC_UHUBCTL_PORT_ESP32S3", "3")
+        assert resolve_target("esp32s3_alt") == ("2-2", 3)

mcp-server/tests/unit/test_ui_screen_log.py

@@ -0,0 +1,80 @@
+"""Pin the `Screen: frame N/M name=X reason=Y` regex + FrameEvent dataclass.
+
+The firmware-side format lives in `src/graphics/Screen.cpp::logFrameChange`;
+if the format string changes, this test — and the parser in
+`tests/ui/_screen_log.py` — have to be updated together.
+"""
+
+from __future__ import annotations
+
+from tests.ui._screen_log import FRAME_RE, FrameEvent, iter_frame_events
+
+
+class TestFrameEventParse:
+    def test_exact_firmware_output(self) -> None:
+        raw = "Screen: frame 2/8 name=home reason=next"
+        evt = FrameEvent.parse(raw)
+        assert evt is not None
+        assert evt.idx == 2
+        assert evt.count == 8
+        assert evt.name == "home"
+        assert evt.reason == "next"
+        assert evt.raw == raw
+
+    def test_with_log_prefix(self) -> None:
+        """Log lines may be preamble-wrapped by the firmware LOG_INFO macro
+        (timestamp, severity, etc.) — the regex uses .search() not .match()
+        so prefixes are fine."""
+        raw = "[INFO] 00:12:34  567   Screen: frame 4/12 name=nodelist_nodes reason=fn_f3    "
+        evt = FrameEvent.parse(raw)
+        assert evt is not None
+        assert evt.idx == 4
+        assert evt.count == 12
+        assert evt.name == "nodelist_nodes"
+        assert evt.reason == "fn_f3"
+
+    def test_rebuild_reason(self) -> None:
+        evt = FrameEvent.parse("Screen: frame 0/5 name=deviceFocused reason=rebuild")
+        assert evt is not None
+        assert evt.reason == "rebuild"
+
+    def test_all_fn_reasons(self) -> None:
+        for k in range(1, 6):
+            evt = FrameEvent.parse(
+                f"Screen: frame {k - 1}/8 name=settings reason=fn_f{k}"
+            )
+            assert evt is not None and evt.reason == f"fn_f{k}"
+
+    def test_unknown_name_is_preserved(self) -> None:
+        """If the reverse-map returns 'unknown', that still parses cleanly."""
+        evt = FrameEvent.parse("Screen: frame 99/100 name=unknown reason=prev")
+        assert evt is not None and evt.name == "unknown"
+
+    def test_non_matching_line_returns_none(self) -> None:
+        assert FrameEvent.parse("BOOT Booting firmware 2.7.23") is None
+        assert FrameEvent.parse("") is None
+        assert FrameEvent.parse("Screen: without the right format") is None
+
+
+class TestIterFrameEvents:
+    def test_filters_non_matching_lines(self) -> None:
+        lines = [
+            "Booting...",
+            "Screen: frame 1/5 name=home reason=rebuild",
+            "Some other log line",
+            "Screen: frame 2/5 name=textMessage reason=next",
+        ]
+        evts = list(iter_frame_events(lines))
+        assert len(evts) == 2
+        assert evts[0].reason == "rebuild"
+        assert evts[1].reason == "next"
+
+
+class TestRegexAnchoring:
+    def test_regex_is_compiled(self) -> None:
+        assert FRAME_RE.search("Screen: frame 0/0 name=home reason=next") is not None
+
+    def test_regex_allows_unusual_names(self) -> None:
+        r"""Name is `\S+`, so compound names with underscores/digits match."""
+        m = FRAME_RE.search("Screen: frame 5/10 name=nodelist_hopsignal reason=fn_f2")
+        assert m is not None and m["name"] == "nodelist_hopsignal"

platformio.ini

@@ -29,6 +29,7 @@ build_flags = -Wno-missing-field-initializers
 	-DUSE_THREAD_NAMES
 	-DTINYGPS_OPTION_NO_CUSTOM_FIELDS
 	-DPB_ENABLE_MALLOC=1
+	-DPB_VALIDATE_UTF8=1
 	-DRADIOLIB_EXCLUDE_CC1101=1
 	-DRADIOLIB_EXCLUDE_NRF24=1
 	-DRADIOLIB_EXCLUDE_RF69=1
@@ -56,6 +57,7 @@ build_flags = -Wno-missing-field-initializers
 	-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
 	-DMESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE=1
 	-DMESHTASTIC_EXCLUDE_POWERMON=1
+	-DMESHTASTIC_EXCLUDE_STATUS=1
 	-D MAX_THREADS=40 ; As we've split modules, we have more threads to manage
 	#-DBUILD_EPOCH=$UNIX_TIME ; set in platformio-custom.py now
 	#-D OLED_PL=1
@@ -66,7 +68,7 @@ monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/21e484f409cde18d44012caef84c244eb5ca28f3.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/6bfd1f135e1ebe37afd6050bb4b9964cea3fcfda.zip
 	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
 	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
@@ -124,7 +126,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/5305670b68eb5b92d14e62b5b536969ca4bb441f.zip
+	https://github.com/meshtastic/device-ui/archive/56e1da4e7d30abcd746a2092a30e422f8cf5fc2b.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -225,8 +227,6 @@ lib_deps =
 	https://github.com/Sensirion/arduino-i2c-sfa3x/archive/refs/tags/1.0.0.zip
 	# renovate: datasource=github-tags depName=Sensirion I2C SCD30 packageName=sensirion/arduino-i2c-scd30
 	https://github.com/Sensirion/arduino-i2c-scd30/archive/refs/tags/1.0.0.zip
-	# renovate: datasource=github-tags depName=arduino-sht packageName=sensirion/arduino-sht
-	https://github.com/Sensirion/arduino-sht/archive/refs/tags/v1.2.6.zip
 
 ; Environmental sensors with BSEC2 (Bosch proprietary IAQ)
 [environmental_extra]

src/DisplayFormatters.cpp

@@ -4,8 +4,7 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
                                                          bool usePreset)
 {
 
-    // If use_preset is false, always return "Custom" — callers such as RadioInterface and Channels
-    // rely on this being a stable literal for channel-name hashing and default-channel detection.
+    // If use_preset is false, always return "Custom"
     if (!usePreset) {
         return "Custom";
     }

src/Power.cpp

@@ -40,22 +40,6 @@
 #include "concurrency/LockGuard.h"
 #endif
 
-#if defined(ARCH_STM32WL) && defined(BATTERY_PIN)
-#include "stm32yyxx_ll_adc.h"
-
-/* Analog read resolution */
-#if defined(LL_ADC_RESOLUTION_12B)
-#define LL_ADC_RESOLUTION LL_ADC_RESOLUTION_12B
-#define BATTERY_SENSE_RESOLUTION_BITS 12
-#elif defined(LL_ADC_DS_DATA_WIDTH_12_BIT)
-#define LL_ADC_RESOLUTION LL_ADC_DS_DATA_WIDTH_12_BIT
-#define BATTERY_SENSE_RESOLUTION_BITS 12
-#else
-#error "ADC resolution could not be defined!"
-#endif
-#define ADC_RANGE (1 << BATTERY_SENSE_RESOLUTION_BITS)
-#endif
-
 #if defined(DEBUG_HEAP_MQTT) && !MESHTASTIC_EXCLUDE_MQTT
 #include "mqtt/MQTT.h"
 #include "target_specific.h"
@@ -344,17 +328,11 @@ class AnalogBatteryLevel : public HasBatteryLevel
             float scaled = 0;
 
             battery_adcEnable();
-#ifdef ARCH_STM32WL
-            // STM32 ADC with VREFINT runtime calibration
-            Vref = __LL_ADC_CALC_VREFANALOG_VOLTAGE(analogRead(AVREF), LL_ADC_RESOLUTION);
-            raw = analogRead(BATTERY_PIN);
-            scaled = __LL_ADC_CALC_DATA_TO_VOLTAGE(Vref, raw, LL_ADC_RESOLUTION);
-            scaled *= operativeAdcMultiplier;
-#elif defined(ARCH_ESP32) // ADC block for espressif platforms
+#ifdef ARCH_ESP32 // ADC block for espressif platforms
             raw = espAdcRead();
             scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
             scaled *= operativeAdcMultiplier;
-#else                     // block for all other platforms
+#else // block for all other platforms
 #ifdef ARCH_NRF52
             concurrency::LockGuard saadcGuard(concurrency::nrf52SaadcLock);
 #endif
@@ -552,11 +530,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
     bool initial_read_done = false;
     float last_read_value = (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS);
     uint32_t last_read_time_ms = 0;
-#ifdef ARCH_STM32WL
-    // 3300mV placeholder for STM32 errata where VREFINT factory calibration may be missing
-    // (e.g. STM32U0, see DS14756 Rev 3 §2.4.1 "VREFINT offset")
-    uint32_t Vref = 3300;
-#endif
 
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && defined(HAS_RAKPROT)
 
@@ -666,9 +639,7 @@ bool Power::analogInit()
 #define BATTERY_SENSE_RESOLUTION_BITS 10
 #endif
 
-#ifdef ARCH_STM32WL
-    analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS);
-#elif defined(ARCH_ESP32) // ESP32 needs special analog stuff
+#ifdef ARCH_ESP32 // ESP32 needs special analog stuff
 
 #ifndef ADC_WIDTH // max resolution by default
     static const adc_bits_width_t width = ADC_WIDTH_BIT_12;
@@ -678,7 +649,7 @@ bool Power::analogInit()
 #ifndef BAT_MEASURE_ADC_UNIT // ADC1
     adc1_config_width(width);
     adc1_config_channel_atten(adc_channel, atten);
-#else                        // ADC2
+#else // ADC2
     adc2_config_channel_atten(adc_channel, atten);
 #ifndef CONFIG_IDF_TARGET_ESP32S3
     // ADC2 wifi bug workaround
@@ -708,7 +679,7 @@ bool Power::analogInit()
 
     // NRF52 ADC init moved to powerHAL_init in nrf52 platform
 
-#if !defined(ARCH_ESP32) && !defined(ARCH_STM32WL)
+#ifndef ARCH_ESP32
     analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS);
 #endif
 
@@ -746,37 +717,17 @@ bool Power::setup()
         found = true;
 #endif
     }
-#ifdef EXT_PWR_DETECT
-    attachInterrupt(
-        EXT_PWR_DETECT,
-        []() {
-            power->setIntervalFromNow(0);
-            runASAP = true;
-        },
-        CHANGE);
-#endif
-#ifdef BATTERY_CHARGING_INV
-    attachInterrupt(
-        BATTERY_CHARGING_INV,
-        []() {
-            power->setIntervalFromNow(0);
-            runASAP = true;
-        },
-        CHANGE);
-#endif
-#ifdef EXT_CHRG_DETECT
-    attachInterrupt(
-        EXT_CHRG_DETECT,
-        []() {
-            power->setIntervalFromNow(0);
-            runASAP = true;
-            BaseType_t higherWake = 0;
-        },
-        CHANGE);
-#endif
+    attachPowerInterrupts();
     enabled = found;
     low_voltage_counter = 0;
 
+#ifdef ARCH_ESP32
+    // Register callbacks for before and after lightsleep
+    // Used to detach and reattach interrupts
+    lsObserver.observe(&notifyLightSleep);
+    lsEndObserver.observe(&notifyLightSleepEnd);
+#endif
+
     return found;
 }
 
@@ -1055,6 +1006,97 @@ int32_t Power::runOnce()
     return (statusHandler && statusHandler->isInitialized()) ? (1000 * 20) : RUN_SAME;
 }
 
+#ifdef ARCH_ESP32
+
+// Detach our class' interrupts before lightsleep
+// Allows sleep.cpp to configure its own interrupts, which wake the device on user-button press
+int Power::beforeLightSleep(void *unused)
+{
+    LOG_WARN("Detaching power interrupts for sleep");
+    detachPowerInterrupts();
+    return 0; // Indicates success
+}
+
+// Reconfigure our interrupts
+// Our class' interrupts were disconnected during sleep, to allow the user button to wake the device from sleep
+int Power::afterLightSleep(esp_sleep_wakeup_cause_t cause)
+{
+    attachPowerInterrupts();
+    return 0; // Indicates success
+}
+
+#endif
+
+/*
+ * Attach (or re-attach) hardware interrupts for power management
+ * Public method. Used outside class when waking from MCU sleep
+ */
+void Power::attachPowerInterrupts()
+{
+#ifdef EXT_PWR_DETECT
+    attachInterrupt(
+        EXT_PWR_DETECT,
+        []() {
+            power->setIntervalFromNow(0);
+            runASAP = true;
+        },
+        CHANGE);
+#endif
+#ifdef BATTERY_CHARGING_INV
+    attachInterrupt(
+        BATTERY_CHARGING_INV,
+        []() {
+            power->setIntervalFromNow(0);
+            runASAP = true;
+        },
+        CHANGE);
+#endif
+#ifdef EXT_CHRG_DETECT
+    attachInterrupt(
+        EXT_CHRG_DETECT,
+        []() {
+            power->setIntervalFromNow(0);
+            runASAP = true;
+            BaseType_t higherWake = 0;
+        },
+        CHANGE);
+#endif
+#ifdef PMU_IRQ
+    if (PMU) {
+        attachInterrupt(
+            PMU_IRQ,
+            [] {
+                pmu_irq = true;
+                power->setIntervalFromNow(0);
+                runASAP = true;
+            },
+            FALLING);
+    }
+#endif
+}
+
+/*
+ * Detach the "normal" button interrupts.
+ * Public method. Used before attaching a "wake-on-button" interrupt for MCU sleep
+ */
+void Power::detachPowerInterrupts()
+{
+#ifdef EXT_PWR_DETECT
+    detachInterrupt(EXT_PWR_DETECT);
+#endif
+#ifdef BATTERY_CHARGING_INV
+    detachInterrupt(BATTERY_CHARGING_INV);
+#endif
+#ifdef EXT_CHRG_DETECT
+    detachInterrupt(EXT_CHRG_DETECT);
+#endif
+#ifdef PMU_IRQ
+    if (PMU) {
+        detachInterrupt(PMU_IRQ);
+    }
+#endif
+}
+
 /**
  * Init the power manager chip
  *
@@ -1332,8 +1374,6 @@ bool Power::axpChipInit()
     }
 
     pinMode(PMU_IRQ, INPUT);
-    attachInterrupt(
-        PMU_IRQ, [] { pmu_irq = true; }, FALLING);
 
     // we do not look for AXPXXX_CHARGING_FINISHED_IRQ & AXPXXX_CHARGING_IRQ
     // because it occurs repeatedly while there is no battery also it could cause

src/RedirectablePrint.cpp

@@ -137,7 +137,7 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
         if (color) {
             ::printf("\u001b[0m");
         }
-        ::printf("| %02d:%02d:%02d %u.%03u ", hour, min, sec, millis() / 1000, millis() % 1000);
+        ::printf("| %02d:%02d:%02d %u ", hour, min, sec, millis() / 1000);
 #else
         printf("%s ", logLevel);
         if (color) {
@@ -151,7 +151,7 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
         if (color) {
             ::printf("\u001b[0m");
         }
-        ::printf("| ??:??:?? %u.%03u ", millis() / 1000, millis() % 1000);
+        ::printf("| ??:??:?? %u ", millis() / 1000);
 #else
         printf("%s ", logLevel);
         if (color) {

src/SerialConsole.cpp

@@ -30,9 +30,6 @@ SerialConsole *console;
 
 void consoleInit()
 {
-    if (console) {
-        return;
-    }
     auto sc = new SerialConsole(); // Must be dynamically allocated because we are now inheriting from thread
 
 #if defined(SERIAL_HAS_ON_RECEIVE)

src/configuration.h

@@ -78,11 +78,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Configuration
 // -----------------------------------------------------------------------------
 
-// Pre-hop drop handling (compile-time flag).
-#ifndef MESHTASTIC_PREHOP_DROP
-#define MESHTASTIC_PREHOP_DROP 0
-#endif
-
 /// Convert a preprocessor name into a quoted string
 #define xstr(s) ystr(s)
 #define ystr(s) #s
@@ -231,7 +226,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BME_ADDR 0x76
 #define BME_ADDR_ALTERNATE 0x77
 #define MCP9808_ADDR 0x18
-#define INA_ADDR 0x40 // same as SHT2X
+#define INA_ADDR 0x40
 #define INA_ADDR_ALTERNATE 0x41
 #define INA_ADDR_WAVESHARE_UPS 0x43
 #define INA3221_ADDR 0x42
@@ -244,8 +239,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LPS22HB_ADDR 0x5C
 #define LPS22HB_ADDR_ALT 0x5D
 #define SFA30_ADDR 0x5D
-#define SHTXX_ADDR 0x44
-#define SHTXX_ADDR_ALT 0x45
+#define SHT31_4x_ADDR 0x44
+#define SHT31_4x_ADDR_ALT 0x45
 #define PMSA003I_ADDR 0x12
 #define QMA6100P_ADDR 0x12
 #define AHT10_ADDR 0x38
@@ -515,7 +510,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MESHTASTIC_EXCLUDE_REMOTEHARDWARE 1
 #define MESHTASTIC_EXCLUDE_STOREFORWARD 1
 #define MESHTASTIC_EXCLUDE_TEXTMESSAGE 1
-#define MESHTASTIC_EXCLUDE_TRAFFIC_MANAGEMENT 1
 #define MESHTASTIC_EXCLUDE_ATAK 1
 #define MESHTASTIC_EXCLUDE_CANNEDMESSAGES 1
 #define MESHTASTIC_EXCLUDE_NEIGHBORINFO 1

src/detect/ScanI2C.h

@@ -31,6 +31,10 @@ class ScanI2C
         INA3221,
         MAX17048,
         MCP9808,
+        SHT31,
+        SHT4X,
+        SHTC3,
+        SHTXX,
         LPS22HB,
         QMC6310U,
         QMC6310N,
@@ -86,13 +90,13 @@ class ScanI2C
         DA217,
         CHSC6X,
         CST226SE,
+        CST3530,
         BMI270,
         SEN5X,
         SFA30,
         CW2015,
         SCD30,
         ADS1115,
-        SHTXX
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -136,9 +136,7 @@ bool ScanI2CTwoWire::i2cCommandResponseLength(ScanI2C::DeviceAddress addr, uint1
     return match;
 }
 
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_AIR_QUALITY_SENSOR
-// FIXME Move to a separate file for detection of sensors that require more complex interactions?
-// For SEN5X detection
+/// for SEN5X detection
 // Note, this code needs to be called before setting the I2C bus speed
 // for the screen at high speed. The speed needs to be at 100kHz, otherwise
 // detection will not work
@@ -176,46 +174,6 @@ String readSEN5xProductName(TwoWire *i2cBus, uint8_t address)
 
     return String(productName);
 }
-#endif
-
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
-bool detectSHT21SerialNumber(TwoWire *i2cBus, uint8_t address)
-{
-
-    i2cBus->beginTransmission(address);
-    i2cBus->write(0xFA);
-    i2cBus->write(0x0F);
-
-    if (i2cBus->endTransmission() != 0)
-        return false;
-
-    if (i2cBus->requestFrom(address, (uint8_t)8) != 8)
-        return false;
-
-    // Just flush the data
-    while (i2cBus->available() < 8) {
-        i2cBus->read();
-    }
-
-    i2cBus->beginTransmission(address);
-    i2cBus->write(0xFC);
-    i2cBus->write(0xC9);
-
-    if (i2cBus->endTransmission() != 0)
-        return false;
-
-    if (i2cBus->requestFrom(address, (uint8_t)6) != 6)
-        return false;
-
-    // Just flush the data
-    while (i2cBus->available() < 6) {
-        i2cBus->read();
-    }
-
-    // Assume we detect the SHT21 if something came back from the request
-    return true;
-}
-#endif
 
 #define SCAN_SIMPLE_CASE(ADDR, T, ...)                                                                                           \
     case ADDR:                                                                                                                   \
@@ -413,7 +371,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 break;
 #endif
 #if !defined(M5STACK_UNITC6L)
-            case INA_ADDR: // Same as SHT2X
+            case INA_ADDR:
             case INA_ADDR_ALTERNATE:
             case INA_ADDR_WAVESHARE_UPS:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2);
@@ -429,12 +387,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                         logFoundDevice("INA260", (uint8_t)addr.address);
                         type = INA260;
                     }
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
-                } else if (detectSHT21SerialNumber(i2cBus, (uint8_t)addr.address)) {
-                    logFoundDevice("SHTXX (SHT2X)", (uint8_t)addr.address);
-                    type = SHTXX;
-#endif
-                } else { // Assume INA219 if none of the above ones are found
+                } else { // Assume INA219 if INA260 ID is not found
                     logFoundDevice("INA219", (uint8_t)addr.address);
                     type = INA219;
                 }
@@ -495,19 +448,22 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     }
                     break;
                 }
-            case SHTXX_ADDR:     // same as OPT3001_ADDR_ALT
-            case SHTXX_ADDR_ALT: // same as OPT3001_ADDR
+            case SHT31_4x_ADDR:     // same as OPT3001_ADDR_ALT
+            case SHT31_4x_ADDR_ALT: // same as OPT3001_ADDR
                 if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
                     type = OPT3001;
                     logFoundDevice("OPT3001", (uint8_t)addr.address);
-                } else { // SHTXX
-                    type = SHTXX;
-                    logFoundDevice("SHTXX", (uint8_t)addr.address);
+                } else if (i2cCommandResponseLength(addr, 0x89, 6)) { // SHT4x serial number (6 bytes inc. CRC)
+                    type = SHT4X;
+                    logFoundDevice("SHT4X", (uint8_t)addr.address);
+                } else {
+                    type = SHT31;
+                    logFoundDevice("SHT31", (uint8_t)addr.address);
                 }
 
                 break;
 
-                SCAN_SIMPLE_CASE(SHTC3_ADDR, SHTXX, "SHTXX", (uint8_t)addr.address)
+                SCAN_SIMPLE_CASE(SHTC3_ADDR, SHTC3, "SHTC3", (uint8_t)addr.address)
             case RCWL9620_ADDR:
                 // get MAX30102 PARTID
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFF), 1);
@@ -629,7 +585,31 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(PCT2075_ADDR, PCT2075, "PCT2075", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(SCD30_ADDR, SCD30, "SCD30", (uint8_t)addr.address);
             case CST328_ADDR:
-                // Do we have the CST328 or the CST226SE
+                // Do we have the CST328 or the CST226SE,CST3530
+                {
+                    // T-Deck pro V1.1 new touch panel use CST3530
+                    int retry = 5;
+                    while (retry--) {
+                        uint8_t buffer[7];
+                        uint8_t r_cmd[] = {0x0d0, 0x03, 0x00, 0x00};
+                        i2cBus->beginTransmission(addr.address);
+                        i2cBus->write(r_cmd, sizeof(r_cmd));
+                        if (i2cBus->endTransmission() == 0) {
+                            i2cBus->requestFrom((int)addr.address, 7);
+                            i2cBus->readBytes(buffer, 7);
+                            if (buffer[2] == 0xCA && buffer[3] == 0xCA) {
+                                logFoundDevice("CST3530", (uint8_t)addr.address);
+                                type = CST3530;
+                                break;
+                            }
+                        }
+                        uint8_t cmd1[] = {0xD0, 0x00, 0x04, 0x00};
+                        i2cBus->beginTransmission(addr.address);
+                        i2cBus->write(cmd1, sizeof(cmd1));
+                        i2cBus->endTransmission();
+                        delay(50);
+                    }
+                }
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xAB), 1);
                 if (registerValue == 0xA9) {
                     type = CST226SE;
@@ -719,7 +699,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     logFoundDevice("BMX160", (uint8_t)addr.address);
                     break;
                 } else {
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_AIR_QUALITY_SENSOR
                     String prod = "";
                     prod = readSEN5xProductName(i2cBus, addr.address);
                     if (prod.startsWith("SEN55")) {
@@ -735,7 +714,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                         logFoundDevice("Sensirion SEN50", addr.address);
                         break;
                     }
-#endif
                     if (addr.address == BMX160_ADDR) {
                         type = BMX160;
                         logFoundDevice("BMX160", (uint8_t)addr.address);

src/gps/GPS.cpp

@@ -103,14 +103,6 @@ static int32_t gpsSwitch()
     if (gps) {
         int currentState = digitalRead(PIN_GPS_SWITCH);
 
-        // Respect explicit NOT_PRESENT mode and do not let the hardware switch re-enable GPS.
-        if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_NOT_PRESENT) {
-            gps->disable();
-            lastState = currentState;
-            firstrun = false;
-            return 1000;
-        }
-
         // if the switch is set to zero, disable the GPS Thread
         if (firstrun)
             if (currentState == LOW)

src/gps/GPSUpdateScheduling.cpp

@@ -70,20 +70,25 @@ bool GPSUpdateScheduling::isUpdateDue()
 // Have we been searching for a GPS position for too long?
 bool GPSUpdateScheduling::searchedTooLong()
 {
+    constexpr uint32_t oneMinuteMs = 60UL * 1000UL;
+    constexpr uint32_t maxSearchClampMs = 15UL * oneMinuteMs; // Hard cap: 15 minutes is always too long
+    uint32_t elapsed = elapsedSearchMs();
+
+    // Anything over 15 minutes is too long, regardless of the broadcast interval.
+    // TODO: Make a smarter algorithm that backs off the search dwell time when not getting a lock.
+    if (elapsed > maxSearchClampMs)
+        return true;
+
     uint32_t minimumOrConfiguredSecs =
         Default::getConfiguredOrMinimumValue(config.position.position_broadcast_secs, default_broadcast_interval_secs);
     uint32_t maxSearchMs = Default::getConfiguredOrDefaultMs(minimumOrConfiguredSecs, default_broadcast_interval_secs);
-    // If broadcast interval set to max, no such thing as "too long"
-    if (maxSearchMs == UINT32_MAX)
-        return false;
 
     // If we've been searching longer than our position broadcast interval: that's too long
-    else if (elapsedSearchMs() > maxSearchMs)
+    if (elapsed > maxSearchMs)
         return true;
 
     // Otherwise, not too long yet!
-    else
-        return false;
+    return false;
 }
 
 // Updates the predicted time-to-get-lock, by exponentially smoothing the latest observation

src/graphics/EInkDisplay2.cpp

@@ -104,8 +104,13 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
 // End the update process - virtual method, overridden in derived class
 void EInkDisplay::endUpdate()
 {
-    // Power off display hardware, then deep-sleep (Except Wireless Paper V1.1, no deep-sleep)
+#ifndef EINK_NOT_HIBERNATE
+    // By default, power off the E-Ink display hardware and enter hibernate().
+    // Boards/panels that define EINK_NOT_HIBERNATE intentionally skip this step.
+    // Skipping hibernate() can help avoid panel-specific wake/refresh or ghosting issues,
+    // but it typically trades lower power savings for that compatibility.
     adafruitDisplay->hibernate();
+#endif
 }
 
 // Write the buffer to the display memory

src/graphics/Screen.cpp

@@ -60,7 +60,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "main.h"
 #include "mesh-pb-constants.h"
 #include "mesh/Channels.h"
-#include "mesh/Default.h"
 #include "mesh/generated/meshtastic/deviceonly.pb.h"
 #include "modules/ExternalNotificationModule.h"
 #include "modules/TextMessageModule.h"
@@ -99,7 +98,6 @@ namespace graphics
 
 // This means the *visible* area (sh1106 can address 132, but shows 128 for example)
 #define IDLE_FRAMERATE 1 // in fps
-#define COMPASS_ACTIVE_FRAMERATE 20
 
 // DEBUG
 #define NUM_EXTRA_FRAMES 3 // text message and debug frame
@@ -137,60 +135,6 @@ static bool heartbeat = false;
 
 extern bool hasUnreadMessage;
 
-static inline float wrapHeading360(float heading)
-{
-    if (heading < 0.0f) {
-        heading += 360.0f;
-    } else if (heading >= 360.0f) {
-        heading -= 360.0f;
-    }
-    return heading;
-}
-
-void Screen::setHeading(float heading)
-{
-    const float wrappedHeading = wrapHeading360(heading);
-
-    if (!hasCompass) {
-        hasCompass = true;
-        compassHeading = wrappedHeading;
-        return;
-    }
-
-    // Interpolate using shortest-path angular delta to avoid jumps around 0/360.
-    float delta = wrappedHeading - compassHeading;
-    if (delta > 180.0f) {
-        delta -= 360.0f;
-    } else if (delta < -180.0f) {
-        delta += 360.0f;
-    }
-
-    // Adaptive filtering:
-    // - Strong damping for tiny deltas (jitter)
-    // - Faster response for larger turns
-    const float absDelta = (delta >= 0.0f) ? delta : -delta;
-    if (absDelta < 1.0f) {
-        return;
-    }
-
-    float alpha = 0.35f;
-    if (absDelta > 25.0f) {
-        alpha = 0.85f;
-    } else if (absDelta > 10.0f) {
-        alpha = 0.65f;
-    }
-
-    float step = delta * alpha;
-    const float maxStep = 12.0f;
-    if (step > maxStep) {
-        step = maxStep;
-    } else if (step < -maxStep) {
-        step = -maxStep;
-    }
-
-    compassHeading = wrapHeading360(compassHeading + step);
-}
-
 // ==============================
 // Overlay Alert Banner Renderer
 // ==============================
@@ -328,25 +272,10 @@ static void drawModuleFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int
 float Screen::estimatedHeading(double lat, double lon)
 {
     static double oldLat, oldLon;
-    static float b = -1.0f;
-    static uint32_t lastHeadingAtMs = 0;
-    const uint32_t now = millis();
-    const uint32_t gpsUpdateIntervalSecs =
-        Default::getConfiguredOrDefault(config.position.gps_update_interval, default_gps_update_interval);
-    uint32_t effectiveUpdateIntervalSecs = gpsUpdateIntervalSecs;
-    if (config.position.position_broadcast_smart_enabled) {
-        const uint32_t smartMinIntervalSecs = Default::getConfiguredOrDefault(
-            config.position.broadcast_smart_minimum_interval_secs, default_broadcast_smart_minimum_interval_secs);
-        if (smartMinIntervalSecs > effectiveUpdateIntervalSecs) {
-            effectiveUpdateIntervalSecs = smartMinIntervalSecs;
-        }
-    }
-    // Two expected update windows; keep arithmetic 32-bit to avoid pulling in larger 64-bit helpers.
-    const uint32_t headingStaleMs =
-        (effectiveUpdateIntervalSecs > (UINT32_MAX / 2000U)) ? UINT32_MAX : (effectiveUpdateIntervalSecs * 2000U);
+    static float b;
 
     if (oldLat == 0) {
-        // Need at least two position points before we can infer heading.
+        // just prepare for next time
         oldLat = lat;
         oldLon = lon;
 
@@ -354,20 +283,12 @@ float Screen::estimatedHeading(double lat, double lon)
     }
 
     float d = GeoCoord::latLongToMeter(oldLat, oldLon, lat, lon);
-    if (d < 10) { // haven't moved enough, keep previous heading (invalid until first real movement)
-        if (lastHeadingAtMs != 0 && (now - lastHeadingAtMs) >= headingStaleMs) {
-            // Heading is stale after prolonged no-movement; force reacquire.
-            b = -1.0f;
-            oldLat = lat;
-            oldLon = lon;
-        }
+    if (d < 10) // haven't moved enough, just keep current bearing
         return b;
-    }
 
     b = GeoCoord::bearing(oldLat, oldLon, lat, lon) * RAD_TO_DEG;
     oldLat = lat;
     oldLon = lon;
-    lastHeadingAtMs = now;
 
     return b;
 }
@@ -1002,22 +923,9 @@ int32_t Screen::runOnce()
     // but we should only call setTargetFPS when framestate changes, because
     // otherwise that breaks animations.
 
-    uint32_t desiredFramerate = IDLE_FRAMERATE;
-#if HAS_GPS && !defined(USE_EINK)
-    if (showingNormalScreen && hasCompass) {
-        const uint8_t currentFrame = ui->getUiState()->currentFrame;
-        if ((framesetInfo.positions.gps != 255 && currentFrame == framesetInfo.positions.gps) ||
-            (framesetInfo.positions.waypoint != 255 && currentFrame == framesetInfo.positions.waypoint) ||
-            (framesetInfo.positions.firstFavorite != 255 && currentFrame >= framesetInfo.positions.firstFavorite &&
-             currentFrame <= framesetInfo.positions.lastFavorite)) {
-            desiredFramerate = COMPASS_ACTIVE_FRAMERATE;
-        }
-    }
-#endif
-
-    if (targetFramerate != desiredFramerate && ui->getUiState()->frameState == FIXED) {
+    if (targetFramerate != IDLE_FRAMERATE && ui->getUiState()->frameState == FIXED) {
         // oldFrameState = ui->getUiState()->frameState;
-        targetFramerate = desiredFramerate;
+        targetFramerate = IDLE_FRAMERATE;
 
         ui->setTargetFPS(targetFramerate);
         forceDisplay();
@@ -1289,7 +1197,7 @@ void Screen::setFrames(FrameFocus focus)
         for (size_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
             const meshtastic_NodeInfoLite *n = nodeDB->getMeshNodeByIndex(i);
             if (n && n->num != nodeDB->getNodeNum() && n->is_favorite) {
-                favoriteFrames.push_back(graphics::UIRenderer::drawFavoriteNode);
+                favoriteFrames.push_back(graphics::UIRenderer::drawNodeInfo);
             }
         }
 
@@ -1318,7 +1226,7 @@ void Screen::setFrames(FrameFocus focus)
     static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
     ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
 
-    prevFrame = -1; // Force drawFavoriteNode to pick a new node (because our list just changed)
+    prevFrame = -1; // Force drawNodeInfo to pick a new node (because our list just changed)
 
     // Focus on a specific frame, in the frame set we just created
     switch (focus) {
@@ -1357,6 +1265,10 @@ void Screen::setFrames(FrameFocus focus)
     // Store the info about this frameset, for future setFrames calls
     this->framesetInfo = fsi;
 
+#ifdef USERPREFS_UI_TEST_LOG
+    logFrameChange("rebuild", ui->getUiState()->currentFrame);
+#endif
+
     setFastFramerate(); // Draw ASAP
 }
 
@@ -1511,11 +1423,77 @@ void Screen::handleOnPress()
     }
 }
 
+#ifdef USERPREFS_UI_TEST_LOG
+void Screen::logFrameChange(const char *reason, uint8_t targetIdx)
+{
+    // Reverse-map an index to a stable name string keyed off FramePositions
+    // field names — so the pytest harness can assert `name=nodelist_nodes`
+    // without caring about how the positions were ordered this boot.
+    const auto &p = framesetInfo.positions;
+    const char *name = "unknown";
+    if (targetIdx == p.home)
+        name = "home";
+    else if (targetIdx == p.deviceFocused)
+        name = "deviceFocused";
+    else if (targetIdx == p.textMessage)
+        name = "textMessage";
+    else if (targetIdx == p.nodelist_nodes)
+        name = "nodelist_nodes";
+    else if (targetIdx == p.nodelist_location)
+        name = "nodelist_location";
+    else if (targetIdx == p.nodelist_lastheard)
+        name = "nodelist_lastheard";
+    else if (targetIdx == p.nodelist_hopsignal)
+        name = "nodelist_hopsignal";
+    else if (targetIdx == p.nodelist_distance)
+        name = "nodelist_distance";
+    else if (targetIdx == p.nodelist_bearings)
+        name = "nodelist_bearings";
+    else if (targetIdx == p.system)
+        name = "system";
+    else if (targetIdx == p.gps)
+        name = "gps";
+    else if (targetIdx == p.lora)
+        name = "lora";
+    else if (targetIdx == p.clock)
+        name = "clock";
+    else if (targetIdx == p.chirpy)
+        name = "chirpy";
+    else if (targetIdx == p.fault)
+        name = "fault";
+    else if (targetIdx == p.waypoint)
+        name = "waypoint";
+    else if (targetIdx == p.focusedModule)
+        name = "focusedModule";
+    else if (targetIdx == p.log)
+        name = "log";
+    else if (targetIdx == p.settings)
+        name = "settings";
+    else if (targetIdx == p.wifi)
+        name = "wifi";
+    else if (p.firstFavorite != 255 && p.lastFavorite != 255 && targetIdx >= p.firstFavorite && targetIdx <= p.lastFavorite)
+        name = "favorite";
+    LOG_INFO("Screen: frame %u/%u name=%s reason=%s", (unsigned)targetIdx, (unsigned)framesetInfo.frameCount, name, reason);
+}
+#endif
+
 void Screen::showFrame(FrameDirection direction)
 {
     // Only advance frames when UI is stable
     if (ui->getUiState()->frameState == FIXED) {
 
+#ifdef USERPREFS_UI_TEST_LOG
+        // Log the *intended* target before the (async) transition fires, so
+        // tests see a deterministic record of what was requested.
+        if (framesetInfo.frameCount > 0) {
+            uint8_t curr = ui->getUiState()->currentFrame;
+            uint8_t target = (direction == FrameDirection::NEXT)
+                                 ? (uint8_t)((curr + 1) % framesetInfo.frameCount)
+                                 : (uint8_t)((curr + framesetInfo.frameCount - 1) % framesetInfo.frameCount);
+            logFrameChange(direction == FrameDirection::NEXT ? "next" : "prev", target);
+        }
+#endif
+
         if (direction == FrameDirection::NEXT) {
             ui->nextFrame();
         } else {
@@ -1847,22 +1825,37 @@ int Screen::handleInputEvent(const InputEvent *event)
                 showFrame(FrameDirection::NEXT);
             } else if (event->inputEvent == INPUT_BROKER_FN_F1) {
                 this->ui->switchToFrame(0);
+#ifdef USERPREFS_UI_TEST_LOG
+                logFrameChange("fn_f1", 0);
+#endif
                 lastScreenTransition = millis();
                 setFastFramerate();
             } else if (event->inputEvent == INPUT_BROKER_FN_F2) {
                 this->ui->switchToFrame(1);
+#ifdef USERPREFS_UI_TEST_LOG
+                logFrameChange("fn_f2", 1);
+#endif
                 lastScreenTransition = millis();
                 setFastFramerate();
             } else if (event->inputEvent == INPUT_BROKER_FN_F3) {
                 this->ui->switchToFrame(2);
+#ifdef USERPREFS_UI_TEST_LOG
+                logFrameChange("fn_f3", 2);
+#endif
                 lastScreenTransition = millis();
                 setFastFramerate();
             } else if (event->inputEvent == INPUT_BROKER_FN_F4) {
                 this->ui->switchToFrame(3);
+#ifdef USERPREFS_UI_TEST_LOG
+                logFrameChange("fn_f4", 3);
+#endif
                 lastScreenTransition = millis();
                 setFastFramerate();
             } else if (event->inputEvent == INPUT_BROKER_FN_F5) {
                 this->ui->switchToFrame(4);
+#ifdef USERPREFS_UI_TEST_LOG
+                logFrameChange("fn_f5", 4);
+#endif
                 lastScreenTransition = millis();
                 setFastFramerate();
             } else if (event->inputEvent == INPUT_BROKER_UP_LONG) {

src/graphics/Screen.h

@@ -330,11 +330,15 @@ class Screen : public concurrency::OSThread
 
     // Function to allow the AccelerometerThread to set the heading if a sensor provides it
     // Mutex needed?
-    void setHeading(float heading);
+    void setHeading(long _heading)
+    {
+        hasCompass = true;
+        compassHeading = fmod(_heading, 360);
+    }
 
     bool hasHeading() { return hasCompass; }
 
-    float getHeading() { return compassHeading; }
+    long getHeading() { return compassHeading; }
 
     void setEndCalibration(uint32_t _endCalibrationAt) { endCalibrationAt = _endCalibrationAt; }
     uint32_t getEndCalibration() { return endCalibrationAt; }
@@ -669,6 +673,16 @@ class Screen : public concurrency::OSThread
     void handleOnPress();
     void handleStartFirmwareUpdateScreen();
 
+#ifdef USERPREFS_UI_TEST_LOG
+    // Test-only: emits one LOG_INFO line on every frame transition so the
+    // pytest harness can assert which frame is shown. Gated behind a macro
+    // so the chatty log doesn't ship in release builds. Enabled via
+    // build_testing_profile(enable_ui_log=True) in mcp-server/userprefs.py.
+    // Member function (not free) because FramesetInfo is a private nested
+    // type — only methods of Screen can reach it.
+    void logFrameChange(const char *reason, uint8_t targetIdx);
+#endif
+
     // Info collected by setFrames method.
     // Index location of specific frames.
     // - Used to apply the FrameFocus parameter of setFrames
@@ -778,4 +792,4 @@ extern std::vector<std::string> functionSymbol;
 extern std::string functionSymbolString;
 extern graphics::Screen *screen;
 
-#endif
+#endif

src/graphics/TFTDisplay.cpp

@@ -1254,14 +1254,14 @@ void TFTDisplay::display(bool fromBlank)
 
         // Did we find a pixel that needs updating on this row?
         if (x_FirstPixelUpdate < displayWidth) {
-            // Align the first pixel for update to an even number so the total alignment of
-            // the data will be at 32-bit boundary, which is required by GDMA SPI transfers.
-            x_FirstPixelUpdate &= ~1;
 
-            // Step 3a: copy rest of the pixels in this row into the pixel line buffer,
-            // while also recording the last pixel in the row that needs updating.
-            // Since the first changed pixel will be looked up, the x_LastPixelUpdate will be set.
-            for (x = x_FirstPixelUpdate; x < displayWidth; x++) {
+            // Quickly write out the first changed pixel (saves another array lookup)
+            linePixelBuffer[x_FirstPixelUpdate] = isset ? colorTftMesh : colorTftBlack;
+            x_LastPixelUpdate = x_FirstPixelUpdate;
+
+            // Step 3: copy all remaining pixels in this row into the pixel line buffer,
+            // while also recording the last pixel in the row that needs updating
+            for (x = x_FirstPixelUpdate + 1; x < displayWidth; x++) {
                 isset = buffer[x + y_byteIndex] & y_byteMask;
                 linePixelBuffer[x] = isset ? colorTftMesh : colorTftBlack;
 
@@ -1274,14 +1274,6 @@ void TFTDisplay::display(bool fromBlank)
                     x_LastPixelUpdate = x;
                 }
             }
-            // Step 3b: Round up the last pixel to odd number to maintain 32-bit alignment for SPIs.
-            // Most displays will have even number of pixels in a row -- this will be in bounds
-            // of the displayWidth. (Hopefully odd displays will just ignore that extra pixel.)
-            x_LastPixelUpdate |= 1;
-            // Ensure the last pixel index does not exceed the display width.
-            if (x_LastPixelUpdate >= displayWidth) {
-                x_LastPixelUpdate = displayWidth - 1;
-            }
 #if defined(HACKADAY_COMMUNICATOR)
             tft->draw16bitBeRGBBitmap(x_FirstPixelUpdate, y, &linePixelBuffer[x_FirstPixelUpdate],
                                       (x_LastPixelUpdate - x_FirstPixelUpdate + 1), 1);

src/graphics/draw/CompassRenderer.cpp

@@ -1,6 +1,10 @@
 #include "configuration.h"
 #if HAS_SCREEN
 #include "CompassRenderer.h"
+#include "NodeDB.h"
+#include "UIRenderer.h"
+#include "configuration.h"
+#include "gps/GeoCoord.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
 #include <cmath>
@@ -17,8 +21,8 @@ struct Point {
 
     void rotate(float angle)
     {
-        float cos_a = cosf(angle);
-        float sin_a = sinf(angle);
+        float cos_a = cos(angle);
+        float sin_a = sin(angle);
         float new_x = x * cos_a - y * sin_a;
         float new_y = x * sin_a + y * cos_a;
         x = new_x;
@@ -47,30 +51,21 @@ void drawCompassNorth(OLEDDisplay *display, int16_t compassX, int16_t compassY,
     if (currentResolution == ScreenResolution::High) {
         radius += 4;
     }
-    float northX = 0.0f;
-    float northY = -radius;
-    if (uiconfig.compass_mode != meshtastic_CompassMode_FIXED_RING) {
-        const float c = cosf(-myHeading);
-        const float s = sinf(-myHeading);
-        const float rx = northX * c - northY * s;
-        const float ry = northX * s + northY * c;
-        northX = rx;
-        northY = ry;
-    }
-    northX += compassX;
-    northY += compassY;
+    Point north(0, -radius);
+    if (uiconfig.compass_mode != meshtastic_CompassMode_FIXED_RING)
+        north.rotate(-myHeading);
+    north.translate(compassX, compassY);
 
     display->setFont(FONT_SMALL);
     display->setTextAlignment(TEXT_ALIGN_CENTER);
     display->setColor(BLACK);
-    const int16_t nLabelWidth = display->getStringWidth("N");
     if (currentResolution == ScreenResolution::High) {
-        display->fillRect(northX - 8, northY - 1, nLabelWidth + 3, FONT_HEIGHT_SMALL - 6);
+        display->fillRect(north.x - 8, north.y - 1, display->getStringWidth("N") + 3, FONT_HEIGHT_SMALL - 6);
     } else {
-        display->fillRect(northX - 4, northY - 1, nLabelWidth + 2, FONT_HEIGHT_SMALL - 6);
+        display->fillRect(north.x - 4, north.y - 1, display->getStringWidth("N") + 2, FONT_HEIGHT_SMALL - 6);
     }
     display->setColor(WHITE);
-    display->drawString(northX, northY - 3, "N");
+    display->drawString(north.x, north.y - 3, "N");
 }
 
 void drawNodeHeading(OLEDDisplay *display, int16_t compassX, int16_t compassY, uint16_t compassDiam, float headingRadian)
@@ -118,46 +113,11 @@ void drawArrowToNode(OLEDDisplay *display, int16_t x, int16_t y, int16_t size, f
     display->fillTriangle(tip.x, tip.y, right.x, right.y, tail.x, tail.y);
 }
 
-bool getHeadingRadians(double lat, double lon, float &headingRadian)
+float estimatedHeading(double lat, double lon)
 {
-    headingRadian = 0.0f;
-
-    if (uiconfig.compass_mode == meshtastic_CompassMode_FREEZE_HEADING)
-        return true;
-
-    if (!screen)
-        return false;
-
-    if (screen->hasHeading()) {
-        headingRadian = screen->getHeading() * DEG_TO_RAD;
-        return true;
-    }
-
-    const float estimatedHeadingDeg = screen->estimatedHeading(lat, lon);
-    if (!(estimatedHeadingDeg >= 0.0f))
-        return false;
-
-    headingRadian = estimatedHeadingDeg * DEG_TO_RAD;
-    return true;
-}
-
-float adjustBearingForCompassMode(float bearingRadian, float headingRadian)
-{
-    if (uiconfig.compass_mode != meshtastic_CompassMode_FIXED_RING)
-        return bearingRadian - headingRadian;
-
-    return bearingRadian;
-}
-
-float radiansToDegrees360(float angleRadian)
-{
-    constexpr float fullTurnDeg = 360.0f;
-    float degrees = angleRadian * RAD_TO_DEG;
-    if (degrees < 0.0f)
-        degrees += fullTurnDeg;
-    else if (degrees >= fullTurnDeg)
-        degrees -= fullTurnDeg;
-    return degrees;
+    // Simple magnetic declination estimation
+    // This is a very basic implementation - the original might be more sophisticated
+    return 0.0f; // Return 0 for now, indicating no heading available
 }
 
 uint16_t getCompassDiam(uint32_t displayWidth, uint32_t displayHeight)
@@ -177,4 +137,4 @@ uint16_t getCompassDiam(uint32_t displayWidth, uint32_t displayHeight)
 
 } // namespace CompassRenderer
 } // namespace graphics
-#endif
+#endif

src/graphics/draw/CompassRenderer.h

@@ -1,6 +1,7 @@
 #pragma once
 
 #include "graphics/Screen.h"
+#include "mesh/generated/meshtastic/mesh.pb.h"
 #include <OLEDDisplay.h>
 #include <OLEDDisplayUi.h>
 
@@ -24,9 +25,7 @@ void drawNodeHeading(OLEDDisplay *display, int16_t compassX, int16_t compassY, u
 void drawArrowToNode(OLEDDisplay *display, int16_t x, int16_t y, int16_t size, float bearing);
 
 // Navigation and location functions
-bool getHeadingRadians(double lat, double lon, float &headingRadian);
-float adjustBearingForCompassMode(float bearingRadian, float headingRadian);
-float radiansToDegrees360(float angleRadian);
+float estimatedHeading(double lat, double lon);
 uint16_t getCompassDiam(uint32_t displayWidth, uint32_t displayHeight);
 
 } // namespace CompassRenderer

src/graphics/draw/DebugRenderer.cpp

@@ -408,16 +408,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     display->drawString(nameX, getTextPositions(display)[line++], device_role);
 
     // === Third Row: Radio Preset ===
-    // For custom modem settings show the actual parameters; for presets use the preset name.
-    char modeStr[16];
-    if (!config.lora.use_preset) {
-        snprintf(modeStr, sizeof(modeStr), "BW%u-SF%u-CR%u", static_cast<unsigned>(config.lora.bandwidth),
-                 static_cast<unsigned>(config.lora.spread_factor), static_cast<unsigned>(config.lora.coding_rate));
-    } else {
-        strncpy(modeStr, DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, true),
-                sizeof(modeStr) - 1);
-        modeStr[sizeof(modeStr) - 1] = '\0';
-    }
+    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset);
 
     char regionradiopreset[25];
     const char *region = myRegion ? myRegion->name : NULL;
@@ -425,7 +416,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
         if (currentResolution == ScreenResolution::UltraLow) {
             snprintf(regionradiopreset, sizeof(regionradiopreset), "%s", region);
         } else {
-            snprintf(regionradiopreset, sizeof(regionradiopreset), "%s/%s", region, modeStr);
+            snprintf(regionradiopreset, sizeof(regionradiopreset), "%s/%s", region, mode);
         }
     }
     textWidth = display->getStringWidth(regionradiopreset);

src/graphics/draw/MenuHandler.cpp

@@ -18,7 +18,6 @@
 #include "main.h"
 #include "mesh/Default.h"
 #include "mesh/MeshTypes.h"
-#include "mesh/RadioLibInterface.h"
 #include "modules/AdminModule.h"
 #include "modules/CannedMessageModule.h"
 #include "modules/ExternalNotificationModule.h"
@@ -26,7 +25,6 @@
 #include "modules/TraceRouteModule.h"
 #include <algorithm>
 #include <array>
-#include <cmath>
 #include <functional>
 #include <utility>
 
@@ -161,22 +159,31 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
                 return;
             }
 
-            // Guard: without a reboot, reconfigure() applies the region directly.
-            // Reject LORA_24 on sub-GHz-only hardware — getRadio() used to catch this post-reboot.
-            // TODO: change this to either use the validateLoraConfig() logic or at least check the region for wideLora
-            // rather than a hardcoded check for LORA_24.
-            if (selectedRegion == meshtastic_Config_LoRaConfig_RegionCode_LORA_24 &&
-                !(RadioLibInterface::instance && RadioLibInterface::instance->wideLora())) {
-                LOG_WARN("Radio hardware does not support 2.4 GHz; ignoring region selection");
-                return;
-            }
-
             config.lora.region = selectedRegion;
             auto changes = SEGMENT_CONFIG;
 
+        // FIXME: This should be a method consolidated with the same logic in the admin message as well
+        // This is needed as we wait til picking the LoRa region to generate keys for the first time.
 #if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN || MESHTASTIC_EXCLUDE_PKI)
-            if (crypto) {
-                crypto->ensurePkiKeys(config.security, owner);
+            if (!owner.is_licensed) {
+                bool keygenSuccess = false;
+                if (config.security.private_key.size == 32) {
+                    // public key is derived from private, so this will always have the same result.
+                    if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
+                        keygenSuccess = true;
+                    }
+
+                } else {
+                    LOG_INFO("Generate new PKI keys");
+                    crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes);
+                    keygenSuccess = true;
+                }
+                if (keygenSuccess) {
+                    config.security.public_key.size = 32;
+                    config.security.private_key.size = 32;
+                    owner.public_key.size = 32;
+                    memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
+                }
             }
 #endif
             config.lora.tx_enabled = true;
@@ -192,6 +199,7 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
             }
 
             service->reloadConfig(changes);
+            rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
         });
 
     bannerOptions.durationMs = duration;
@@ -257,24 +265,13 @@ void menuHandler::FrequencySlotPicker()
     optionsEnumArray[options++] = 0;
 
     // Calculate number of channels (copied from RadioInterface::applyModemConfig())
-
     meshtastic_Config_LoRaConfig &loraConfig = config.lora;
     double bw = loraConfig.use_preset ? modemPresetToBwKHz(loraConfig.modem_preset, myRegion->wideLora)
                                       : bwCodeToKHz(loraConfig.bandwidth);
 
     uint32_t numChannels = 0;
     if (myRegion) {
-        // Match RadioInterface::applyModemConfig(): include padding, add spacing in numerator, and use round()
-        const double spacing = myRegion->profile->spacing;
-        const double padding = myRegion->profile->padding;
-        const double channelBandwidthMHz = bw / 1000.0;
-        const double numerator = (myRegion->freqEnd - myRegion->freqStart) + spacing;
-        const double denominator = spacing + (padding * 2) + channelBandwidthMHz;
-        if (denominator > 0.0) {
-            numChannels = static_cast<uint32_t>(round(numerator / denominator));
-        } else {
-            LOG_WARN("Invalid region configuration: non-positive channel spacing/width");
-        }
+        numChannels = (uint32_t)floor((myRegion->freqEnd - myRegion->freqStart) / (myRegion->spacing + (bw / 1000.0)));
     } else {
         LOG_WARN("Region not set, cannot calculate number of channels");
         return;
@@ -310,6 +307,7 @@ void menuHandler::FrequencySlotPicker()
 
         config.lora.channel_num = selected;
         service->reloadConfig(SEGMENT_CONFIG);
+        rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
     };
 
     screen->showOverlayBanner(bannerOptions);
@@ -348,6 +346,7 @@ void menuHandler::radioPresetPicker()
             config.lora.channel_num = 0;        // Reset to default channel for the preset
             config.lora.override_frequency = 0; // Clear any custom frequency
             service->reloadConfig(SEGMENT_CONFIG);
+            rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
         });
 
     screen->showOverlayBanner(bannerOptions);

src/graphics/draw/NodeListRenderer.cpp

@@ -3,9 +3,6 @@
 #include "CompassRenderer.h"
 #include "NodeDB.h"
 #include "NodeListRenderer.h"
-#if !MESHTASTIC_EXCLUDE_STATUS
-#include "modules/StatusMessageModule.h"
-#endif
 #include "UIRenderer.h"
 #include "gps/GeoCoord.h"
 #include "gps/RTC.h" // for getTime() function
@@ -95,41 +92,8 @@ std::string getSafeNodeName(OLEDDisplay *display, meshtastic_NodeInfoLite *node,
 
     // 1) Choose target candidate (long vs short) only if present
     const char *raw = nullptr;
-
-#if !MESHTASTIC_EXCLUDE_STATUS
-    // If long-name mode is enabled, and we have a recent status for this node,
-    // prefer "(short_name) statusText" as the raw candidate.
-    std::string composedFromStatus;
-    if (config.display.use_long_node_name && node && node->has_user && statusMessageModule) {
-        const auto &recent = statusMessageModule->getRecentReceived();
-        const StatusMessageModule::RecentStatus *found = nullptr;
-        for (auto it = recent.rbegin(); it != recent.rend(); ++it) {
-            if (it->fromNodeId == node->num && !it->statusText.empty()) {
-                found = &(*it);
-                break;
-            }
-        }
-
-        if (found) {
-            const char *shortName = node->user.short_name;
-            composedFromStatus.reserve(4 + (shortName ? std::strlen(shortName) : 0) + 1 + found->statusText.size());
-            composedFromStatus += "(";
-            if (shortName && *shortName) {
-                composedFromStatus += shortName;
-            }
-            composedFromStatus += ") ";
-            composedFromStatus += found->statusText;
-
-            raw = composedFromStatus.c_str(); // safe for now; we'll sanitize immediately into std::string
-        }
-    }
-#endif
-
-    // If we didn't compose from status, use normal long/short selection
-    if (!raw) {
-        if (node && node->has_user) {
-            raw = config.display.use_long_node_name ? node->user.long_name : node->user.short_name;
-        }
+    if (node && node->has_user) {
+        raw = config.display.use_long_node_name ? node->user.long_name : node->user.short_name;
     }
 
     // 2) Preserve UTF-8 names so emotes can be detected and rendered.
@@ -409,13 +373,14 @@ void drawNodeDistance(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
         }
     }
 
-    const char *distanceLabel = (strlen(distStr) > 0) ? distStr : "?";
-    int offset = (currentResolution == ScreenResolution::High)
-                     ? (isLeftCol ? 7 : 10) // Offset for Wide Screens (Left Column:Right Column)
-                     : (isLeftCol ? 4 : 7); // Offset for Narrow Screens (Left Column:Right Column)
-    int rightEdge = x + columnWidth - offset;
-    int textWidth = display->getStringWidth(distanceLabel);
-    display->drawString(rightEdge - textWidth, y, distanceLabel);
+    if (strlen(distStr) > 0) {
+        int offset = (currentResolution == ScreenResolution::High)
+                         ? (isLeftCol ? 7 : 10) // Offset for Wide Screens (Left Column:Right Column)
+                         : (isLeftCol ? 4 : 7); // Offset for Narrow Screens (Left Column:Right Column)
+        int rightEdge = x + columnWidth - offset;
+        int textWidth = display->getStringWidth(distStr);
+        display->drawString(rightEdge - textWidth, y, distStr);
+    }
 }
 
 void drawEntryDynamic_Nodes(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth)
@@ -466,8 +431,8 @@ void drawEntryCompass(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     }
 }
 
-void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth,
-                      float myHeadingRadian, double userLat, double userLon)
+void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth, float myHeading,
+                      double userLat, double userLon)
 {
     if (!nodeDB->hasValidPosition(node))
         return;
@@ -481,11 +446,11 @@ void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     double nodeLat = node->position.latitude_i * 1e-7;
     double nodeLon = node->position.longitude_i * 1e-7;
     float bearing = GeoCoord::bearing(userLat, userLon, nodeLat, nodeLon);
-    float relativeBearing = CompassRenderer::adjustBearingForCompassMode(bearing, myHeadingRadian);
-    float relativeBearingDeg = CompassRenderer::radiansToDegrees360(relativeBearing);
+    float bearingToNode = RAD_TO_DEG * bearing;
+    float relativeBearing = fmod((bearingToNode - myHeading + 360), 360);
     // Shrink size by 2px
     int size = FONT_HEIGHT_SMALL - 5;
-    CompassRenderer::drawArrowToNode(display, centerX, centerY, size, relativeBearingDeg);
+    CompassRenderer::drawArrowToNode(display, centerX, centerY, size, relativeBearing);
     /*
     float angle = relativeBearing * DEG_TO_RAD;
     float halfSize = size / 2.0;
@@ -515,27 +480,12 @@ void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     */
 }
 
-void drawCompassUnknown(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth, float, double,
-                        double)
-{
-    if (!nodeDB->hasValidPosition(node))
-        return;
-
-    bool isLeftCol = (x < SCREEN_WIDTH / 2);
-    int arrowXOffset = (currentResolution == ScreenResolution::High) ? (isLeftCol ? 22 : 24) : (isLeftCol ? 12 : 18);
-    int centerX = x + columnWidth - arrowXOffset;
-
-    display->setFont(FONT_SMALL);
-    display->setTextAlignment(TEXT_ALIGN_CENTER);
-    display->drawString(centerX, y, "?");
-}
-
 // =============================
 // Main Screen Functions
 // =============================
 
 void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y, const char *title,
-                        EntryRenderer renderer, NodeExtrasRenderer extras, float headingRadian, double lat, double lon)
+                        EntryRenderer renderer, NodeExtrasRenderer extras, float heading, double lat, double lon)
 {
     const int COMMON_HEADER_HEIGHT = FONT_HEIGHT_SMALL - 1;
     const int rowYOffset = FONT_HEIGHT_SMALL - 3;
@@ -620,7 +570,7 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
         renderer(display, node, xPos, yPos, columnWidth);
 
         if (extras)
-            extras(display, node, xPos, yPos, columnWidth, headingRadian, lat, lon);
+            extras(display, node, xPos, yPos, columnWidth, heading, lat, lon);
 
         lastNodeY = max(lastNodeY, yPos + FONT_HEIGHT_SMALL);
         yOffset += rowYOffset;
@@ -815,13 +765,9 @@ void drawDistanceScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
 #endif
 void drawNodeListWithCompasses(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
-    float headingRadian = 0.0f;
+    float heading = 0;
+    bool validHeading = false;
     auto ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
-    if (!ourNode || !nodeDB->hasValidPosition(ourNode)) {
-        drawNodeListScreen(display, state, x, y, "Bearings", drawEntryCompass, drawCompassUnknown, headingRadian, 0.0, 0.0);
-        return;
-    }
-
     double lat = DegD(ourNode->position.latitude_i);
     double lon = DegD(ourNode->position.longitude_i);
 
@@ -833,12 +779,21 @@ void drawNodeListWithCompasses(OLEDDisplay *display, OLEDDisplayUiState *state,
         lastSwitchTime = now;
     }
 #endif
-    if (!CompassRenderer::getHeadingRadians(lat, lon, headingRadian)) {
-        drawNodeListScreen(display, state, x, y, "Bearings", drawEntryCompass, drawCompassUnknown, headingRadian, lat, lon);
-        return;
-    }
+    if (uiconfig.compass_mode != meshtastic_CompassMode_FREEZE_HEADING) {
+#if HAS_GPS
+        if (screen->hasHeading()) {
+            heading = screen->getHeading(); // degrees
+            validHeading = true;
+        } else {
+            heading = screen->estimatedHeading(lat, lon);
+            validHeading = !isnan(heading);
+        }
+#endif
 
-    drawNodeListScreen(display, state, x, y, "Bearings", drawEntryCompass, drawCompassArrow, headingRadian, lat, lon);
+        if (!validHeading)
+            return;
+    }
+    drawNodeListScreen(display, state, x, y, "Bearings", drawEntryCompass, drawCompassArrow, heading, lat, lon);
 }
 
 /// Draw a series of fields in a column, wrapping to multiple columns if needed

src/graphics/draw/NodeListRenderer.h

@@ -32,7 +32,7 @@ enum ListMode_Location { MODE_DISTANCE = 0, MODE_BEARING = 1, MODE_COUNT_LOCATIO
 
 // Main node list screen function
 void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y, const char *title,
-                        EntryRenderer renderer, NodeExtrasRenderer extras = nullptr, float headingRadian = 0, double lat = 0,
+                        EntryRenderer renderer, NodeExtrasRenderer extras = nullptr, float heading = 0, double lat = 0,
                         double lon = 0);
 
 // Entry renderers
@@ -43,8 +43,8 @@ void drawEntryDynamic_Nodes(OLEDDisplay *display, meshtastic_NodeInfoLite *node,
 void drawEntryCompass(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth);
 
 // Extras renderers
-void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth,
-                      float myHeadingRadian, double userLat, double userLon);
+void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth, float myHeading,
+                      double userLat, double userLon);
 
 // Screen frame functions
 void drawLastHeardScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);

src/graphics/draw/UIRenderer.cpp

@@ -5,9 +5,6 @@
 #include "MeshService.h"
 #include "NodeDB.h"
 #include "NodeListRenderer.h"
-#if !MESHTASTIC_EXCLUDE_STATUS
-#include "modules/StatusMessageModule.h"
-#endif
 #include "UIRenderer.h"
 #include "airtime.h"
 #include "gps/GeoCoord.h"
@@ -41,15 +38,6 @@ static inline void drawSatelliteIcon(OLEDDisplay *display, int16_t x, int16_t y)
     }
 }
 
-static void drawCompassStatusText(OLEDDisplay *display, int16_t compassX, int16_t compassY, const char *statusLine1,
-                                  const char *statusLine2)
-{
-    display->setTextAlignment(TEXT_ALIGN_CENTER);
-    display->drawString(compassX, compassY - FONT_HEIGHT_SMALL, statusLine1);
-    display->drawString(compassX, compassY, statusLine2);
-    display->setTextAlignment(TEXT_ALIGN_LEFT);
-}
-
 void graphics::UIRenderer::rebuildFavoritedNodes()
 {
     favoritedNodes.clear();
@@ -302,7 +290,7 @@ void UIRenderer::drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const mes
 // * Favorite Node Info *
 // **********************
 // cppcheck-suppress constParameterPointer; signature must match FrameCallback typedef from OLEDDisplayUi library
-void UIRenderer::drawFavoriteNode(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+void UIRenderer::drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
     if (favoritedNodes.empty())
         return;
@@ -354,57 +342,6 @@ void UIRenderer::drawFavoriteNode(OLEDDisplay *display, OLEDDisplayUiState *stat
         UIRenderer::drawStringWithEmotes(display, x, getTextPositions(display)[line++], username, FONT_HEIGHT_SMALL, 1, false);
     }
 
-#if !MESHTASTIC_EXCLUDE_STATUS
-    // === Optional: Last received StatusMessage line for this node ===
-    // Display it directly under the username line (if we have one).
-    if (statusMessageModule) {
-        const auto &recent = statusMessageModule->getRecentReceived();
-        const StatusMessageModule::RecentStatus *found = nullptr;
-
-        // Search newest-to-oldest
-        for (auto it = recent.rbegin(); it != recent.rend(); ++it) {
-            if (it->fromNodeId == node->num && !it->statusText.empty()) {
-                found = &(*it);
-                break;
-            }
-        }
-
-        if (found) {
-            std::string statusLine = std::string(" Status: ") + found->statusText;
-            {
-                const int screenW = display->getWidth();
-                const int ellipseW = display->getStringWidth("...");
-                int w = display->getStringWidth(statusLine.c_str());
-
-                // Only do work if it overflows
-                if (w > screenW) {
-                    bool truncated = false;
-                    if (ellipseW > screenW) {
-                        statusLine.clear();
-                    } else {
-                        while (!statusLine.empty()) {
-                            // remove one char (byte) at a time
-                            statusLine.pop_back();
-                            truncated = true;
-
-                            // Measure candidate with ellipsis appended
-                            std::string candidate = statusLine + "...";
-                            if (display->getStringWidth(candidate.c_str()) <= screenW) {
-                                statusLine = std::move(candidate);
-                                break;
-                            }
-                        }
-                        if (statusLine.empty() && ellipseW <= screenW) {
-                            statusLine = "...";
-                        }
-                    }
-                }
-            }
-            display->drawString(x, getTextPositions(display)[line++], statusLine.c_str());
-        }
-    }
-#endif
-
     // === 2. Signal and Hops (combined on one line, if available) ===
     char signalHopsStr[32] = "";
     bool haveSignal = false;
@@ -701,54 +638,51 @@ void UIRenderer::drawFavoriteNode(OLEDDisplay *display, OLEDDisplayUiState *stat
         display->drawString(x, getTextPositions(display)[line++], batLine);
     }
 
-    bool showCompass = false;
-    float myHeading = 0.0f;
-    float bearing = 0.0f;
-    const bool hasOwnPositionFix = (ourNode && nodeDB->hasValidPosition(ourNode));
-    const bool hasNodePositionFix = nodeDB->hasValidPosition(node);
-    const char *statusLine1 = nullptr;
-    const char *statusLine2 = nullptr;
-    if (hasOwnPositionFix && hasNodePositionFix) {
-        const auto &op = ourNode->position;
-        showCompass = CompassRenderer::getHeadingRadians(DegD(op.latitude_i), DegD(op.longitude_i), myHeading);
-        if (showCompass) {
-            const auto &p = node->position;
-            bearing = GeoCoord::bearing(DegD(op.latitude_i), DegD(op.longitude_i), DegD(p.latitude_i), DegD(p.longitude_i));
-            bearing = CompassRenderer::adjustBearingForCompassMode(bearing, myHeading);
-        } else {
-            statusLine1 = "No";
-            statusLine2 = "Heading";
-        }
-    } else if (!hasOwnPositionFix || !hasNodePositionFix) {
-        statusLine1 = "No";
-        statusLine2 = "Fix";
-    }
-
     // --- Compass Rendering: landscape (wide) screens use the original side-aligned logic ---
     if (SCREEN_WIDTH > SCREEN_HEIGHT) {
-        if (showCompass || statusLine1) {
+        bool showCompass = false;
+        if (ourNode && (nodeDB->hasValidPosition(ourNode) || screen->hasHeading()) && nodeDB->hasValidPosition(node)) {
+            showCompass = true;
+        }
+        if (showCompass) {
             const int16_t topY = getTextPositions(display)[1];
             const int16_t bottomY = SCREEN_HEIGHT - (FONT_HEIGHT_SMALL - 1);
             const int16_t usableHeight = bottomY - topY - 5;
             int16_t compassRadius = usableHeight / 2;
             if (compassRadius < 8)
                 compassRadius = 8;
+            const int16_t compassDiam = compassRadius * 2;
             const int16_t compassX = x + SCREEN_WIDTH - compassRadius - 8;
             const int16_t compassY = topY + (usableHeight / 2) + ((FONT_HEIGHT_SMALL - 1) / 2) + 2;
-            const int16_t compassDiam = compassRadius * 2;
+
+            const auto &op = ourNode->position;
+            float myHeading = screen->hasHeading() ? screen->getHeading() * PI / 180
+                                                   : screen->estimatedHeading(DegD(op.latitude_i), DegD(op.longitude_i));
+
+            const auto &p = node->position;
+            /* unused
+            float d =
+                GeoCoord::latLongToMeter(DegD(p.latitude_i), DegD(p.longitude_i), DegD(op.latitude_i), DegD(op.longitude_i));
+            */
+            float bearing = GeoCoord::bearing(DegD(op.latitude_i), DegD(op.longitude_i), DegD(p.latitude_i), DegD(p.longitude_i));
+            if (uiconfig.compass_mode == meshtastic_CompassMode_FREEZE_HEADING) {
+                myHeading = 0;
+            } else {
+                bearing -= myHeading;
+            }
 
             display->drawCircle(compassX, compassY, compassRadius);
-            if (showCompass) {
-                CompassRenderer::drawCompassNorth(display, compassX, compassY, myHeading, compassRadius);
-                CompassRenderer::drawNodeHeading(display, compassX, compassY, compassDiam, bearing);
-            } else {
-                drawCompassStatusText(display, compassX, compassY, statusLine1, statusLine2);
-            }
+            CompassRenderer::drawCompassNorth(display, compassX, compassY, myHeading, compassRadius);
+            CompassRenderer::drawNodeHeading(display, compassX, compassY, compassDiam, bearing);
         }
         // else show nothing
     } else {
         // Portrait or square: put compass at the bottom and centered, scaled to fit available space
-        if (showCompass || statusLine1) {
+        bool showCompass = false;
+        if (ourNode && (nodeDB->hasValidPosition(ourNode) || screen->hasHeading()) && nodeDB->hasValidPosition(node)) {
+            showCompass = true;
+        }
+        if (showCompass) {
             int yBelowContent = (line > 0 && line <= 5) ? (getTextPositions(display)[line - 1] + FONT_HEIGHT_SMALL + 2)
                                                         : getTextPositions(display)[1];
             const int margin = 4;
@@ -759,8 +693,8 @@ void UIRenderer::drawFavoriteNode(OLEDDisplay *display, OLEDDisplayUiState *stat
 #else
             const int navBarHeight = 0;
 #endif
-            // --------- END PATCH FOR EINK NAV BAR -----------
             int availableHeight = SCREEN_HEIGHT - yBelowContent - navBarHeight - margin;
+            // --------- END PATCH FOR EINK NAV BAR -----------
 
             if (availableHeight < FONT_HEIGHT_SMALL * 2)
                 return;
@@ -774,13 +708,25 @@ void UIRenderer::drawFavoriteNode(OLEDDisplay *display, OLEDDisplayUiState *stat
             int compassX = x + SCREEN_WIDTH / 2;
             int compassY = yBelowContent + availableHeight / 2;
 
-            display->drawCircle(compassX, compassY, compassRadius);
-            if (showCompass) {
-                graphics::CompassRenderer::drawCompassNorth(display, compassX, compassY, myHeading, compassRadius);
-                graphics::CompassRenderer::drawNodeHeading(display, compassX, compassY, compassRadius * 2, bearing);
-            } else {
-                drawCompassStatusText(display, compassX, compassY, statusLine1, statusLine2);
+            const auto &op = ourNode->position;
+            float myHeading = 0;
+            if (uiconfig.compass_mode != meshtastic_CompassMode_FREEZE_HEADING) {
+                myHeading = screen->hasHeading() ? screen->getHeading() * PI / 180
+                                                 : screen->estimatedHeading(DegD(op.latitude_i), DegD(op.longitude_i));
             }
+            graphics::CompassRenderer::drawCompassNorth(display, compassX, compassY, myHeading, compassRadius);
+
+            const auto &p = node->position;
+            /* unused
+            float d =
+                GeoCoord::latLongToMeter(DegD(p.latitude_i), DegD(p.longitude_i), DegD(op.latitude_i), DegD(op.longitude_i));
+            */
+            float bearing = GeoCoord::bearing(DegD(op.latitude_i), DegD(op.longitude_i), DegD(p.latitude_i), DegD(p.longitude_i));
+            if (uiconfig.compass_mode != meshtastic_CompassMode_FREEZE_HEADING)
+                bearing -= myHeading;
+            graphics::CompassRenderer::drawNodeHeading(display, compassX, compassY, compassRadius * 2, bearing);
+
+            display->drawCircle(compassX, compassY, compassRadius);
         }
         // else show nothing
     }
@@ -1216,7 +1162,6 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
 
     // === Header ===
     graphics::drawCommonHeader(display, x, y, titleStr);
-    const int *textPos = getTextPositions(display);
 
     // === First Row: My Location ===
 #if HAS_GPS
@@ -1231,12 +1176,12 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
         } else {
             displayLine = config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_NOT_PRESENT ? "No GPS" : "GPS off";
         }
-        drawSatelliteIcon(display, x, textPos[line]);
+        drawSatelliteIcon(display, x, getTextPositions(display)[line]);
         int xOffset = (currentResolution == ScreenResolution::High) ? 6 : 0;
-        display->drawString(x + 11 + xOffset, textPos[line++], displayLine);
+        display->drawString(x + 11 + xOffset, getTextPositions(display)[line++], displayLine);
     } else {
         // Onboard GPS
-        UIRenderer::drawGps(display, 0, textPos[line++], gpsStatus);
+        UIRenderer::drawGps(display, 0, getTextPositions(display)[line++], gpsStatus);
     }
 
     config.display.heading_bold = origBold;
@@ -1245,36 +1190,18 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
     geoCoord.updateCoords(int32_t(gpsStatus->getLatitude()), int32_t(gpsStatus->getLongitude()),
                           int32_t(gpsStatus->getAltitude()));
 
-    meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
-    const bool hasOwnPositionFix = (ourNode && nodeDB->hasValidPosition(ourNode));
-    const bool hasLiveGpsFix =
-        (gpsStatus && gpsStatus->getHasLock() && (gpsStatus->getLatitude() != 0 || gpsStatus->getLongitude() != 0));
-    const bool hasSensorHeading = screen->hasHeading();
-    float heading = 0.0f;
+    // === Determine Compass Heading ===
+    float heading = 0;
     bool validHeading = false;
-    const char *statusLine1 = nullptr;
-    const char *statusLine2 = nullptr;
-    if (hasSensorHeading || hasLiveGpsFix || hasOwnPositionFix) {
-        double headingLat = 0.0;
-        double headingLon = 0.0;
-        if (hasLiveGpsFix) {
-            headingLat = DegD(gpsStatus->getLatitude());
-            headingLon = DegD(gpsStatus->getLongitude());
-        } else if (hasOwnPositionFix) {
-            const auto &op = ourNode->position;
-            headingLat = DegD(op.latitude_i);
-            headingLon = DegD(op.longitude_i);
-        }
-        validHeading = CompassRenderer::getHeadingRadians(headingLat, headingLon, heading);
-    }
-
-    if (!validHeading) {
-        if (hasSensorHeading || hasLiveGpsFix || hasOwnPositionFix) {
-            statusLine1 = "No";
-            statusLine2 = "Heading";
+    if (uiconfig.compass_mode == meshtastic_CompassMode_FREEZE_HEADING) {
+        validHeading = true;
+    } else {
+        if (screen->hasHeading()) {
+            heading = radians(screen->getHeading());
+            validHeading = true;
         } else {
-            statusLine1 = "No";
-            statusLine2 = "Fix";
+            heading = screen->estimatedHeading(geoCoord.getLatitude() * 1e-7, geoCoord.getLongitude() * 1e-7);
+            validHeading = !isnan(heading);
         }
     }
 
@@ -1292,18 +1219,18 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
             getUptimeStr(delta, "Last: ", uptimeStr, sizeof(uptimeStr), true);
 #endif
 
-            display->drawString(0, textPos[line++], uptimeStr);
+            display->drawString(0, getTextPositions(display)[line++], uptimeStr);
         } else {
-            display->drawString(0, textPos[line++], "Last: ?");
+            display->drawString(0, getTextPositions(display)[line++], "Last: ?");
         }
 
         // === Third Row: Line 1 GPS Info ===
-        UIRenderer::drawGpsCoordinates(display, x, textPos[line++], gpsStatus, "line1");
+        UIRenderer::drawGpsCoordinates(display, x, getTextPositions(display)[line++], gpsStatus, "line1");
 
         if (uiconfig.gps_format != meshtastic_DeviceUIConfig_GpsCoordinateFormat_OLC &&
             uiconfig.gps_format != meshtastic_DeviceUIConfig_GpsCoordinateFormat_MLS) {
             // === Fourth Row: Line 2 GPS Info ===
-            UIRenderer::drawGpsCoordinates(display, x, textPos[line++], gpsStatus, "line2");
+            UIRenderer::drawGpsCoordinates(display, x, getTextPositions(display)[line++], gpsStatus, "line2");
         }
 
         // === Final Row: Altitude ===
@@ -1314,14 +1241,14 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
         } else {
             snprintf(altitudeLine, sizeof(altitudeLine), "Alt: %.0im", alt);
         }
-        display->drawString(x, textPos[line++], altitudeLine);
+        display->drawString(x, getTextPositions(display)[line++], altitudeLine);
     }
 #if !defined(M5STACK_UNITC6L)
-    // === Draw Compass ===
-    if (validHeading || statusLine1) {
+    // === Draw Compass if heading is valid ===
+    if (validHeading) {
         // --- Compass Rendering: landscape (wide) screens use original side-aligned logic ---
         if (SCREEN_WIDTH > SCREEN_HEIGHT) {
-            const int16_t topY = textPos[1];
+            const int16_t topY = getTextPositions(display)[1];
             const int16_t bottomY = SCREEN_HEIGHT - (FONT_HEIGHT_SMALL - 1); // nav row height
             const int16_t usableHeight = bottomY - topY - 5;
 
@@ -1334,33 +1261,29 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
             // Center vertically and nudge down slightly to keep "N" clear of header
             const int16_t compassY = topY + (usableHeight / 2) + ((FONT_HEIGHT_SMALL - 1) / 2) + 2;
 
+            CompassRenderer::drawNodeHeading(display, compassX, compassY, compassDiam, -heading);
             display->drawCircle(compassX, compassY, compassRadius);
-            if (validHeading) {
-                CompassRenderer::drawNodeHeading(display, compassX, compassY, compassDiam, -heading);
 
-                // "N" label
-                float northAngle = 0;
-                if (uiconfig.compass_mode != meshtastic_CompassMode_FIXED_RING)
-                    northAngle = -heading;
-                float radius = compassRadius;
-                int16_t nX = compassX + (radius - 1) * sin(northAngle);
-                int16_t nY = compassY - (radius - 1) * cos(northAngle);
-                int16_t nLabelWidth = display->getStringWidth("N") + 2;
-                int16_t nLabelHeightBox = FONT_HEIGHT_SMALL + 1;
+            // "N" label
+            float northAngle = 0;
+            if (uiconfig.compass_mode != meshtastic_CompassMode_FIXED_RING)
+                northAngle = -heading;
+            float radius = compassRadius;
+            int16_t nX = compassX + (radius - 1) * sin(northAngle);
+            int16_t nY = compassY - (radius - 1) * cos(northAngle);
+            int16_t nLabelWidth = display->getStringWidth("N") + 2;
+            int16_t nLabelHeightBox = FONT_HEIGHT_SMALL + 1;
 
-                display->setColor(BLACK);
-                display->fillRect(nX - nLabelWidth / 2, nY - nLabelHeightBox / 2, nLabelWidth, nLabelHeightBox);
-                display->setColor(WHITE);
-                display->setFont(FONT_SMALL);
-                display->setTextAlignment(TEXT_ALIGN_CENTER);
-                display->drawString(nX, nY - FONT_HEIGHT_SMALL / 2, "N");
-            } else {
-                drawCompassStatusText(display, compassX, compassY, statusLine1, statusLine2);
-            }
+            display->setColor(BLACK);
+            display->fillRect(nX - nLabelWidth / 2, nY - nLabelHeightBox / 2, nLabelWidth, nLabelHeightBox);
+            display->setColor(WHITE);
+            display->setFont(FONT_SMALL);
+            display->setTextAlignment(TEXT_ALIGN_CENTER);
+            display->drawString(nX, nY - FONT_HEIGHT_SMALL / 2, "N");
         } else {
             // Portrait or square: put compass at the bottom and centered, scaled to fit available space
             // For E-Ink screens, account for navigation bar at the bottom!
-            int yBelowContent = textPos[5] + FONT_HEIGHT_SMALL + 2;
+            int yBelowContent = getTextPositions(display)[5] + FONT_HEIGHT_SMALL + 2;
             const int margin = 4;
             int availableHeight =
 #if defined(USE_EINK)
@@ -1381,29 +1304,25 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
             int compassX = x + SCREEN_WIDTH / 2;
             int compassY = yBelowContent + availableHeight / 2;
 
+            CompassRenderer::drawNodeHeading(display, compassX, compassY, compassRadius * 2, -heading);
             display->drawCircle(compassX, compassY, compassRadius);
-            if (validHeading) {
-                CompassRenderer::drawNodeHeading(display, compassX, compassY, compassRadius * 2, -heading);
 
-                // "N" label
-                float northAngle = 0;
-                if (uiconfig.compass_mode != meshtastic_CompassMode_FIXED_RING)
-                    northAngle = -heading;
-                float radius = compassRadius;
-                int16_t nX = compassX + (radius - 1) * sin(northAngle);
-                int16_t nY = compassY - (radius - 1) * cos(northAngle);
-                int16_t nLabelWidth = display->getStringWidth("N") + 2;
-                int16_t nLabelHeightBox = FONT_HEIGHT_SMALL + 1;
+            // "N" label
+            float northAngle = 0;
+            if (uiconfig.compass_mode != meshtastic_CompassMode_FIXED_RING)
+                northAngle = -heading;
+            float radius = compassRadius;
+            int16_t nX = compassX + (radius - 1) * sin(northAngle);
+            int16_t nY = compassY - (radius - 1) * cos(northAngle);
+            int16_t nLabelWidth = display->getStringWidth("N") + 2;
+            int16_t nLabelHeightBox = FONT_HEIGHT_SMALL + 1;
 
-                display->setColor(BLACK);
-                display->fillRect(nX - nLabelWidth / 2, nY - nLabelHeightBox / 2, nLabelWidth, nLabelHeightBox);
-                display->setColor(WHITE);
-                display->setFont(FONT_SMALL);
-                display->setTextAlignment(TEXT_ALIGN_CENTER);
-                display->drawString(nX, nY - FONT_HEIGHT_SMALL / 2, "N");
-            } else {
-                drawCompassStatusText(display, compassX, compassY, statusLine1, statusLine2);
-            }
+            display->setColor(BLACK);
+            display->fillRect(nX - nLabelWidth / 2, nY - nLabelHeightBox / 2, nLabelWidth, nLabelHeightBox);
+            display->setColor(WHITE);
+            display->setFont(FONT_SMALL);
+            display->setTextAlignment(TEXT_ALIGN_CENTER);
+            display->drawString(nX, nY - FONT_HEIGHT_SMALL / 2, "N");
         }
     }
 #endif

src/graphics/draw/UIRenderer.h

@@ -50,7 +50,7 @@ class UIRenderer
     // Navigation bar overlay
     static void drawNavigationBar(OLEDDisplay *display, OLEDDisplayUiState *state);
 
-    static void drawFavoriteNode(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
+    static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 
     static void drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 

src/graphics/niche/Drivers/EInk/ED047TC1.cpp

@@ -0,0 +1,122 @@
+/*
+
+    NicheGraphics parallel E-Ink driver for the LilyGo T5-S3-ePaper-Pro (ED047TC1).
+
+    InkHUD buffer format : 1bpp, horizontal bytes, MSB = leftmost pixel, 1 = white
+    FastEPD buffer format: 1bpp, horizontal bytes, MSB = leftmost pixel, 1 = white
+
+    Both formats share the same pixel layout and polarity (1 = white, 0 = black).
+    The InkHUD safe-area buffer (944×523) is copied into the centre of the physical
+    960×540 FastEPD buffer so content clears the panel's inactive edge border.
+    See ED047TC1.h for the H_OFFSET_BYTES / V_OFFSET_TOP / V_OFFSET_BOTTOM constants.
+
+*/
+
+// Ruler diagnostic — uncomment to draw calibration lines at each physical edge.
+// #define EINK_EDGE_LINES
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+#ifdef T5_S3_EPAPER_PRO
+
+#include "./ED047TC1.h"
+
+#include "FastEPD.h"
+#include "configuration.h"
+
+using namespace NicheGraphics::Drivers;
+
+void ED047TC1::begin(SPIClass *spi, uint8_t pin_dc, uint8_t pin_cs, uint8_t pin_busy, uint8_t pin_rst)
+{
+    // Parallel display — SPI parameters are not used
+    (void)spi;
+    (void)pin_dc;
+    (void)pin_cs;
+    (void)pin_busy;
+    (void)pin_rst;
+
+    epaper = new FASTEPD;
+
+#if defined(T5_S3_EPAPER_PRO_V1)
+    epaper->initPanel(BB_PANEL_LILYGO_T5PRO, 28000000);
+#elif defined(T5_S3_EPAPER_PRO_V2)
+    epaper->initPanel(BB_PANEL_LILYGO_T5PRO_V2, 28000000);
+    // Initialize all PCA9535 port-0 pins as outputs / HIGH
+    for (int i = 0; i < 8; i++) {
+        epaper->ioPinMode(i, OUTPUT);
+        epaper->ioWrite(i, HIGH);
+    }
+#else
+#error "ED047TC1 driver: unsupported variant — define T5_S3_EPAPER_PRO_V1 or T5_S3_EPAPER_PRO_V2"
+#endif
+
+    epaper->setMode(BB_MODE_1BPP);
+    epaper->clearWhite();
+    epaper->fullUpdate(true); // Blocking initial clear
+}
+
+void ED047TC1::update(uint8_t *imageData, UpdateTypes type)
+{
+    if (!epaper)
+        return;
+
+    // InkHUD renders into a DISPLAY_WIDTH × DISPLAY_HEIGHT safe-area buffer.
+    // We need to place that into the centre of the physical 960×540 FastEPD buffer,
+    // leaving blank margins at every edge to avoid the panel's inactive border.
+    const uint32_t srcRowBytes = (DISPLAY_WIDTH + 7) / 8; // bytes per row in InkHUD buffer (118)
+    const uint32_t dstRowBytes = (960 + 7) / 8;           // bytes per row in physical buffer (120)
+    const uint32_t dstTotalRows = 540;
+
+    uint8_t *cur = epaper->currentBuffer();
+
+    // Fill physical buffer with white (0xFF = white in FastEPD 1bpp)
+    memset(cur, 0xFF, dstRowBytes * dstTotalRows);
+
+    // Copy each InkHUD row into the physical buffer with horizontal + vertical offsets
+    for (uint32_t row = 0; row < DISPLAY_HEIGHT; row++) {
+        const uint8_t *srcRow = imageData + row * srcRowBytes;
+        uint8_t *dstRow = cur + (row + V_OFFSET_TOP) * dstRowBytes + H_OFFSET_BYTES;
+        memcpy(dstRow, srcRow, srcRowBytes);
+    }
+
+#ifdef EINK_EDGE_LINES
+    // Draw a 1px black box at the exact boundary of the safe area within the
+    // physical buffer. If the margins are correct, all 4 lines should be
+    // fully visible and right at the edge of the usable display area.
+
+    auto setPixelBlack = [&](uint32_t col, uint32_t row) { cur[row * dstRowBytes + col / 8] &= ~(0x80 >> (col % 8)); };
+
+    const uint32_t safeX = H_OFFSET_BYTES * 8;
+    const uint32_t safeY = V_OFFSET_TOP;
+    const uint32_t safeW = DISPLAY_WIDTH;
+    const uint32_t safeH = DISPLAY_HEIGHT;
+
+    // Top edge: horizontal line at safeY
+    for (uint32_t col = safeX; col < safeX + safeW; col++)
+        setPixelBlack(col, safeY);
+
+    // Bottom edge: horizontal line at safeY + safeH - 1
+    for (uint32_t col = safeX; col < safeX + safeW; col++)
+        setPixelBlack(col, safeY + safeH - 1);
+
+    // Left edge: vertical line at safeX
+    for (uint32_t row = safeY; row < safeY + safeH; row++)
+        setPixelBlack(safeX, row);
+
+    // Right edge: vertical line at safeX + safeW - 1
+    for (uint32_t row = safeY; row < safeY + safeH; row++)
+        setPixelBlack(safeX + safeW - 1, row);
+#endif
+
+    if (type == FULL) {
+        epaper->fullUpdate(CLEAR_SLOW, false);
+        epaper->backupPlane(); // Sync pPrevious so next partialUpdate has a correct baseline
+    } else {
+        // FAST: true partial update — compares pCurrent vs pPrevious and only applies
+        // the update waveform to rows that actually changed. Unchanged rows get a neutral
+        // signal (no visible effect). partialUpdate() updates pPrevious internally.
+        epaper->partialUpdate(false, 0, dstTotalRows - 1);
+    }
+}
+
+#endif // T5_S3_EPAPER_PRO
+#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS

src/graphics/niche/Drivers/EInk/ED047TC1.h

@@ -0,0 +1,90 @@
+/*
+
+    E-Ink display driver adapter
+        - ED047TC1 (via FastEPD library)
+        - Manufacturer: E Ink / used in LilyGo T5-E-Paper-S3-Pro
+        - Size: 4.7 inch
+        - Physical resolution: 960px x 540px
+        - Interface: 8-bit parallel (NOT SPI)
+
+    Unlike the other NicheGraphics EInk drivers, this one drives a parallel e-paper
+    panel via the FastEPD library. SPI parameters passed to begin() are ignored.
+
+    The ED047TC1 panel has an inactive pixel border on all four edges (~4–8 physical
+    pixels). DISPLAY_WIDTH / DISPLAY_HEIGHT expose a reduced "safe area" to InkHUD so
+    that content is never drawn into this dead zone. The update() method copies the
+    InkHUD frame buffer into the centre of the larger physical 960×540 buffer, using
+    H_OFFSET_BYTES (horizontal, whole bytes = 8 pixels per byte),
+    V_OFFSET_TOP and V_OFFSET_BOTTOM (vertical, pixel rows) to position it.
+
+    Changing these constants shifts content inward from each physical edge:
+        H_OFFSET_BYTES = 1  →  8px left margin, 8px right margin   (960 – 8 – 8   = 944)
+        V_OFFSET_TOP   = 9  →  9px top margin  (asymmetric: top ≠ bottom)
+        V_OFFSET_BOTTOM = 8 →  8px bottom margin                    (540 – 9 – 8   = 523)
+
+*/
+
+#pragma once
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+#include "configuration.h"
+
+#include "./EInk.h"
+
+// Forward declare to avoid pulling FastEPD into all translation units
+class FASTEPD;
+
+namespace NicheGraphics::Drivers
+{
+
+class ED047TC1 : public EInk
+{
+    // Safe-area dimensions exposed to InkHUD (physical panel is 960×540).
+    //
+    // The ED047TC1 has an inactive pixel border on all physical edges.
+    // The physical buffer coordinates do NOT directly match the visual orientation
+    // due to FastEPD's portrait scan direction and InkHUD's rotation=3 (270° CW):
+    //
+    //   Physical buffer          Visual on device (rotation=3)
+    //   ─────────────────        ──────────────────────────────
+    //   Physical LEFT  cols  →   Visual TOP    edge
+    //   Physical RIGHT cols  →   Visual BOTTOM edge
+    //   Physical TOP   rows  →   Visual RIGHT  edge
+    //   Physical BOTTOM rows →   Visual LEFT   edge
+    //
+    // Offset constants shift the InkHUD safe-area away from each physical dead zone:
+    //   H_OFFSET_BYTES : whole bytes from physical left  (8px per byte, affects visual TOP)
+    //   Physical right margin = 960 − H_OFFSET_BYTES×8 − DISPLAY_WIDTH  (affects visual BOTTOM)
+    //   V_OFFSET_TOP   : pixel rows from physical top    (affects visual RIGHT)
+    //   V_OFFSET_BOTTOM: pixel rows from physical bottom (affects visual LEFT)
+    //
+    // Calibrated by flashing a 1px border box and adjusting until all 4 sides are visible.
+
+    static constexpr uint16_t DISPLAY_WIDTH = 944;  // 960 − H_OFFSET_BYTES×8 − right_margin (8+8 = 16px)
+    static constexpr uint16_t DISPLAY_HEIGHT = 523; // 540 − V_OFFSET_TOP − V_OFFSET_BOTTOM (9+8 = 17px)
+
+    static constexpr uint8_t H_OFFSET_BYTES = 1;  // visual TOP  : 8px physical left margin
+                                                  // visual BOTTOM: 960−8−944=8px physical right margin
+    static constexpr uint8_t V_OFFSET_TOP = 9;    // visual RIGHT : CONFIRMED OK
+    static constexpr uint8_t V_OFFSET_BOTTOM = 8; // visual LEFT  : 8px physical bottom margin
+
+    static constexpr UpdateTypes supported = static_cast<UpdateTypes>(FULL | FAST);
+
+  public:
+    ED047TC1() : EInk(DISPLAY_WIDTH, DISPLAY_HEIGHT, supported) {}
+
+    // EInk interface — SPI params are not used for this parallel display
+    void begin(SPIClass *spi, uint8_t pin_dc, uint8_t pin_cs, uint8_t pin_busy, uint8_t pin_rst = 0xFF) override;
+    void update(uint8_t *imageData, UpdateTypes type) override;
+
+  protected:
+    bool isUpdateDone() override { return true; } // FastEPD updates are blocking
+
+  private:
+    FASTEPD *epaper = nullptr;
+};
+
+} // namespace NicheGraphics::Drivers
+
+#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS

src/graphics/niche/InkHUD/AppletFont.h

@@ -88,8 +88,12 @@ class AppletFont
 
 // Greek
 #include "graphics/niche/Fonts/FreeSans12pt_Win1253.h"
+#include "graphics/niche/Fonts/FreeSans18pt_Win1253.h"
+#include "graphics/niche/Fonts/FreeSans24pt_Win1253.h"
 #include "graphics/niche/Fonts/FreeSans6pt_Win1253.h"
 #include "graphics/niche/Fonts/FreeSans9pt_Win1253.h"
+#define FREESANS_24PT_WIN1253 InkHUD::AppletFont(FreeSans24pt_Win1253, InkHUD::AppletFont::WINDOWS_1253, -5, 3)
+#define FREESANS_18PT_WIN1253 InkHUD::AppletFont(FreeSans18pt_Win1253, InkHUD::AppletFont::WINDOWS_1253, -4, 2)
 #define FREESANS_12PT_WIN1253 InkHUD::AppletFont(FreeSans12pt_Win1253, InkHUD::AppletFont::WINDOWS_1253, -3, 1)
 #define FREESANS_9PT_WIN1253 InkHUD::AppletFont(FreeSans9pt_Win1253, InkHUD::AppletFont::WINDOWS_1253, -2, -1)
 #define FREESANS_6PT_WIN1253 InkHUD::AppletFont(FreeSans6pt_Win1253, InkHUD::AppletFont::WINDOWS_1253, -1, -2)

src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.cpp

@@ -177,8 +177,24 @@ static void applyLoRaRegion(meshtastic_Config_LoRaConfig_RegionCode region)
     auto changes = SEGMENT_CONFIG;
 
 #if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN || MESHTASTIC_EXCLUDE_PKI)
-    if (crypto) {
-        crypto->ensurePkiKeys(config.security, owner);
+    if (!owner.is_licensed) {
+        bool keygenSuccess = false;
+
+        if (config.security.private_key.size == 32) {
+            if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
+                keygenSuccess = true;
+            }
+        } else {
+            crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes);
+            keygenSuccess = true;
+        }
+
+        if (keygenSuccess) {
+            config.security.public_key.size = 32;
+            config.security.private_key.size = 32;
+            owner.public_key.size = 32;
+            memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
+        }
     }
 #endif
 

src/input/ButtonThread.cpp

@@ -143,6 +143,10 @@ int32_t ButtonThread::runOnce()
         leadUpSequenceActive = false;
         resetLeadUpSequence();
     }
+#ifdef INPUT_DEBUG
+    if (buttonCurrentlyPressed)
+        LOG_WARN("Button held for %u ms", millis() - buttonPressStartTime);
+#endif
 
     // Progressive lead-up sound system
     if (!_suppressLeadUp && buttonCurrentlyPressed && (millis() - buttonPressStartTime) >= BUTTON_LEADUP_MS) {
@@ -311,7 +315,8 @@ int32_t ButtonThread::runOnce()
 void ButtonThread::attachButtonInterrupts()
 {
     // Interrupt for user button, during normal use. Improves responsiveness.
-    attachInterrupt(_pinNum, _intRoutine, CHANGE);
+    if (_intRoutine != nullptr)
+        attachInterrupt(_pinNum, _intRoutine, CHANGE);
 }
 
 /*
@@ -320,7 +325,8 @@ void ButtonThread::attachButtonInterrupts()
  */
 void ButtonThread::detachButtonInterrupts()
 {
-    detachInterrupt(_pinNum);
+    if (_intRoutine != nullptr)
+        detachInterrupt(_pinNum);
 }
 
 #ifdef ARCH_ESP32

src/input/TouchScreenImpl1.cpp

@@ -29,7 +29,8 @@ void TouchScreenImpl1::init()
     return;
 #else
     TouchScreenBase::init(true);
-    inputBroker->registerSource(this);
+    if (inputBroker)
+        inputBroker->registerSource(this);
 #endif
 }
 

src/memGet.cpp

@@ -10,26 +10,8 @@
 #include "memGet.h"
 #include "configuration.h"
 
-#if defined(MESHTASTIC_DYNAMIC_SBRK_HEAP)
-#include <malloc.h>
-#include <unistd.h> // sbrk
-
 #ifdef ARCH_STM32WL
-// Returns the uncommitted sbrk headroom: addressable space between the current heap
-// break and the stack pointer that has not yet been committed to the arena.
-static uint32_t sbrkHeadroom()
-{
-    // defined in STM32 linker script
-    extern char _estack;
-    extern char _Min_Stack_Size;
-
-    uint32_t max_sp = (uint32_t)(&_estack - &_Min_Stack_Size);
-    uint32_t heap_end = (uint32_t)sbrk(0);
-    return (max_sp > heap_end) ? (max_sp - heap_end) : 0;
-}
-#else
-#error Unsupported architecture!
-#endif
+#include <malloc.h>
 #endif
 
 MemGet memGet;
@@ -46,9 +28,9 @@ uint32_t MemGet::getFreeHeap()
     return dbgHeapFree();
 #elif defined(ARCH_RP2040)
     return rp2040.getFreeHeap();
-#elif defined(MESHTASTIC_DYNAMIC_SBRK_HEAP) // Currently: ARCH_STM32WL
+#elif defined(ARCH_STM32WL)
     struct mallinfo m = mallinfo();
-    return m.fordblks + sbrkHeadroom(); // Free space within arena + uncommitted sbrk headroom
+    return m.fordblks; // Total free space (bytes)
 #else
     // this platform does not have heap management function implemented
     return UINT32_MAX;
@@ -67,9 +49,9 @@ uint32_t MemGet::getHeapSize()
     return dbgHeapTotal();
 #elif defined(ARCH_RP2040)
     return rp2040.getTotalHeap();
-#elif defined(MESHTASTIC_DYNAMIC_SBRK_HEAP) // Currently: ARCH_STM32WL
+#elif defined(ARCH_STM32WL)
     struct mallinfo m = mallinfo();
-    return m.arena + sbrkHeadroom(); // Non-mmapped space allocated + uncommitted sbrk headroom
+    return m.arena; // Non-mmapped space allocated (bytes)
 #else
     // this platform does not have heap management function implemented
     return UINT32_MAX;

src/mesh/CryptoEngine.cpp

@@ -71,33 +71,6 @@ bool CryptoEngine::regeneratePublicKey(uint8_t *pubKey, uint8_t *privKey)
     }
     return true;
 }
-
-bool CryptoEngine::ensurePkiKeys(meshtastic_Config_SecurityConfig &security, meshtastic_User &user)
-{
-    if (user.is_licensed) {
-        return false;
-    }
-
-    bool keygenSuccess = false;
-    if (security.private_key.size == 32) {
-        if (regeneratePublicKey(security.public_key.bytes, security.private_key.bytes)) {
-            keygenSuccess = true;
-        }
-    } else {
-        LOG_INFO("Generate new PKI keys");
-        generateKeyPair(security.public_key.bytes, security.private_key.bytes);
-        keygenSuccess = true;
-    }
-
-    if (keygenSuccess) {
-        security.public_key.size = 32;
-        security.private_key.size = 32;
-        user.public_key.size = 32;
-        memcpy(user.public_key.bytes, security.public_key.bytes, 32);
-    }
-
-    return keygenSuccess;
-}
 #endif
 
 /**

src/mesh/CryptoEngine.h

@@ -36,7 +36,6 @@ class CryptoEngine
 #if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN)
     virtual void generateKeyPair(uint8_t *pubKey, uint8_t *privKey);
     virtual bool regeneratePublicKey(uint8_t *pubKey, uint8_t *privKey);
-    virtual bool ensurePkiKeys(meshtastic_Config_SecurityConfig &security, meshtastic_User &user);
 
 #endif
     void setDHPrivateKey(uint8_t *_private_key);

src/mesh/Default.h

@@ -30,11 +30,6 @@
 #define min_node_info_broadcast_secs 60 * 60 // No regular broadcasts of more than once an hour
 #define min_neighbor_info_broadcast_secs 4 * 60 * 60
 #define default_map_publish_interval_secs 60 * 60
-
-// Traffic management defaults
-#define default_traffic_mgmt_position_precision_bits 24               // ~10m grid cells
-#define default_traffic_mgmt_position_min_interval_secs (ONE_DAY / 2) // 12 hours between identical positions
-
 #ifdef USERPREFS_RINGTONE_NAG_SECS
 #define default_ringtone_nag_secs USERPREFS_RINGTONE_NAG_SECS
 #else

src/mesh/HardwareRNG.cpp

@@ -48,8 +48,9 @@ bool mixWithLoRaEntropy(uint8_t *buffer, size_t length)
     // and return false so callers know no extra mixing occurred.
     RadioLibInterface *radio = RadioLibInterface::instance;
     if (!radio) {
-        // Intentionally silent: this path runs during portduinoSetup() before the
-        // console/SerialConsole is initialized, so LOG_* here would dereference a null pointer.
+#ifndef PIO_UNIT_TESTING
+        LOG_ERROR("No radio instance available to provide entropy");
+#endif
         return false;
     }
 

src/mesh/LR11x0Interface.cpp

@@ -71,10 +71,12 @@ template <typename T> bool LR11x0Interface<T>::init()
 
     RadioLibInterface::init();
 
-    if (config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24) { // clamp if wide freq range
-        limitPower(LR1120_MAX_POWER);
-    } else {
-        limitPower(LR1110_MAX_POWER); // default clamp for non-wide freq range
+    limitPower(LR1110_MAX_POWER);
+
+    if ((power > LR1120_MAX_POWER) &&
+        (config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) { // clamp again if wide freq range
+        power = LR1120_MAX_POWER;
+        preambleLength = 12; // 12 is the default for operation above 2GHz
     }
 
 #ifdef LR11X0_RF_SWITCH_SUBGHZ
@@ -175,12 +177,6 @@ template <typename T> bool LR11x0Interface<T>::reconfigure()
     err = lora.setSyncWord(syncWord);
     assert(err == RADIOLIB_ERR_NONE);
 
-    if (config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24) { // clamp if wide freq range
-        limitPower(LR1120_MAX_POWER);
-    } else {
-        limitPower(LR1110_MAX_POWER); // default clamp for non-wide freq range
-    }
-
     err = lora.setPreambleLength(preambleLength);
     assert(err == RADIOLIB_ERR_NONE);
 
@@ -188,14 +184,14 @@ template <typename T> bool LR11x0Interface<T>::reconfigure()
     if (err != RADIOLIB_ERR_NONE)
         RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
 
+    if (power > LR1110_MAX_POWER) // This chip has lower power limits than some
+        power = LR1110_MAX_POWER;
+    if ((power > LR1120_MAX_POWER) && (config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) // 2.4G power limit
+        power = LR1120_MAX_POWER;
+
     err = lora.setOutputPower(power);
     assert(err == RADIOLIB_ERR_NONE);
 
-    // Apply RX gain mode — valid in STDBY, matches resetAGC() pattern
-    err = lora.setRxBoostedGainMode(config.lora.sx126x_rx_boosted_gain);
-    if (err != RADIOLIB_ERR_NONE)
-        LOG_WARN("LR11x0 setRxBoostedGainMode %s%d", radioLibErr, err);
-
     startReceive(); // restart receiving
 
     return RADIOLIB_ERR_NONE;

src/mesh/MeshRadio.h

@@ -6,52 +6,18 @@
 #include "configuration.h"
 #include "detect/LoRaRadioType.h"
 
-// Sentinel marking the end of a modem preset array
-static constexpr meshtastic_Config_LoRaConfig_ModemPreset MODEM_PRESET_END =
-    static_cast<meshtastic_Config_LoRaConfig_ModemPreset>(0xFF);
-
-// Region profile: bundles the preset list with regulatory parameters shared across regions
-struct RegionProfile {
-    const meshtastic_Config_LoRaConfig_ModemPreset *presets; // sentinel-terminated; first entry is the default
-    float spacing;                                           // gaps between radio channels
-    float padding;                                           // padding at each side of the "operating channel"
-    bool audioPermitted;
-    bool licensedOnly;        // a region profile for licensed operators only
-    int8_t textThrottle;      // throttle for text - future expansion
-    int8_t positionThrottle;  // throttle for location data - future expansion
-    int8_t telemetryThrottle; // throttle for telemetry - future expansion
-    uint8_t overrideSlot;     // a per-region override slot for if we need to fix it in place
-};
-
-extern const RegionProfile PROFILE_STD;
-extern const RegionProfile PROFILE_EU868;
-extern const RegionProfile PROFILE_UNDEF;
-// extern const RegionProfile  PROFILE_LITE;
-// extern const RegionProfile  PROFILE_NARROW;
-// extern const RegionProfile  PROFILE_HAM;
-
 // Map from old region names to new region enums
 struct RegionInfo {
     meshtastic_Config_LoRaConfig_RegionCode code;
     float freqStart;
     float freqEnd;
-    float dutyCycle;    // modified by getEffectiveDutyCycle
+    float dutyCycle;
+    float spacing;
     uint8_t powerLimit; // Or zero for not set
+    bool audioPermitted;
     bool freqSwitching;
     bool wideLora;
-    const RegionProfile *profile;
     const char *name; // EU433 etc
-
-    // Preset accessors (delegate through profile)
-    meshtastic_Config_LoRaConfig_ModemPreset getDefaultPreset() const { return profile->presets[0]; }
-    const meshtastic_Config_LoRaConfig_ModemPreset *getAvailablePresets() const { return profile->presets; }
-    size_t getNumPresets() const
-    {
-        size_t n = 0;
-        while (profile->presets[n] != MODEM_PRESET_END)
-            n++;
-        return n;
-    }
 };
 
 extern const RegionInfo regions[];

src/mesh/NextHopRouter.cpp

@@ -4,9 +4,6 @@
 #if !MESHTASTIC_EXCLUDE_TRACEROUTE
 #include "modules/TraceRouteModule.h"
 #endif
-#if HAS_TRAFFIC_MANAGEMENT
-#include "modules/TrafficManagementModule.h"
-#endif
 #include "NodeDB.h"
 
 NextHopRouter::NextHopRouter() {}
@@ -129,28 +126,15 @@ void NextHopRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtast
 /* Check if we should be rebroadcasting this packet if so, do so. */
 bool NextHopRouter::perhapsRebroadcast(const meshtastic_MeshPacket *p)
 {
-    // Check if traffic management wants to exhaust this packet's hops
-    bool exhaustHops = false;
-#if HAS_TRAFFIC_MANAGEMENT
-    if (trafficManagementModule && trafficManagementModule->shouldExhaustHops(*p)) {
-        exhaustHops = true;
-    }
-#endif
-
-    // Allow rebroadcast if hop_limit > 0 OR if we're exhausting hops (which sets hop_limit = 0 but still needs one relay)
-    if (!isToUs(p) && !isFromUs(p) && (p->hop_limit > 0 || exhaustHops)) {
+    if (!isToUs(p) && !isFromUs(p) && p->hop_limit > 0) {
         if (p->id != 0) {
             if (isRebroadcaster()) {
                 if (p->next_hop == NO_NEXT_HOP_PREFERENCE || p->next_hop == nodeDB->getLastByteOfNodeNum(getNodeNum())) {
                     meshtastic_MeshPacket *tosend = packetPool.allocCopy(*p); // keep a copy because we will be sending it
                     LOG_INFO("Rebroadcast received message coming from %x", p->relay_node);
 
-                    // If exhausting hops, force hop_limit = 0 regardless of other logic
-                    if (exhaustHops) {
-                        tosend->hop_limit = 0;
-                        LOG_INFO("Traffic management: exhausting hops for 0x%08x, setting hop_limit=0", getFrom(p));
-                    } else if (shouldDecrementHopLimit(p)) {
-                        // Use shared logic to determine if hop_limit should be decremented
+                    // Use shared logic to determine if hop_limit should be decremented
+                    if (shouldDecrementHopLimit(p)) {
                         tosend->hop_limit--; // bump down the hop count
                     } else {
                         LOG_INFO("favorite-ROUTER/CLIENT_BASE-to-ROUTER/CLIENT_BASE rebroadcast: preserving hop_limit");

src/mesh/NodeDB.cpp

@@ -1306,7 +1306,7 @@ void NodeDB::loadFromDisk()
     // Coerce LoRa config fields derived from presets while bootstrapping.
     // Some clients/UI components display bandwidth/spread_factor directly from config even in preset mode.
     if (config.has_lora && config.lora.use_preset) {
-        RadioInterface::clampConfigLora(config.lora);
+        RadioInterface::bootstrapLoRaConfigFromPreset(config.lora);
     }
 
 #if defined(USERPREFS_LORA_TX_DISABLED) && USERPREFS_LORA_TX_DISABLED
@@ -1657,25 +1657,6 @@ uint32_t sinceReceived(const meshtastic_MeshPacket *p)
     return delta;
 }
 
-HopStartStatus classifyHopStart(const meshtastic_MeshPacket &p)
-{
-    // Guard against invalid values.
-    if (p.hop_start < p.hop_limit)
-        return HopStartStatus::INVALID;
-
-    if (p.hop_start == 0) {
-        // Firmware prior to 2.3.0 (585805c) lacked a hop_start field. Firmware version 2.5.0 (bf34329) introduced a
-        // bitfield that is always present. Use the presence of the bitfield to determine if the origin's firmware
-        // version is guaranteed to have hop_start populated. Note that this can only be done for decoded packets as
-        // the bitfield is encrypted under the channel encryption key.
-        if (p.which_payload_variant == meshtastic_MeshPacket_decoded_tag && p.decoded.has_bitfield)
-            return HopStartStatus::VALID;
-        return HopStartStatus::MISSING_OR_UNKNOWN;
-    }
-
-    return HopStartStatus::VALID;
-}
-
 int8_t getHopsAway(const meshtastic_MeshPacket &p, int8_t defaultIfUnknown)
 {
     // Firmware prior to 2.3.0 (585805c) lacked a hop_start field. Firmware version 2.5.0 (bf34329) introduced a
@@ -1713,22 +1694,6 @@ size_t NodeDB::getNumOnlineMeshNodes(bool localOnly)
 #include "MeshModule.h"
 #include "Throttle.h"
 
-static constexpr uint32_t HOPSTART_DROP_LOG_INTERVAL_MS = 15000;
-
-void logHopStartDrop(const meshtastic_MeshPacket &p, const char *context)
-{
-    static uint32_t lastLogMs = 0;
-    if (Throttle::isWithinTimespanMs(lastLogMs, HOPSTART_DROP_LOG_INTERVAL_MS)) {
-        return;
-    }
-    lastLogMs = millis();
-    const bool decoded = (p.which_payload_variant == meshtastic_MeshPacket_decoded_tag);
-    const bool hasBitfield = decoded && p.decoded.has_bitfield;
-    LOG_DEBUG(
-        "Drop packet (%s): hop_start invalid/missing (from=0x%x id=%u hop_start=%u hop_limit=%u decoded=%d has_bitfield=%d)",
-        context ? context : "unknown", p.from, p.id, p.hop_start, p.hop_limit, decoded, hasBitfield);
-}
-
 /** Update position info for this node based on received position data
  */
 void NodeDB::updatePosition(uint32_t nodeId, const meshtastic_Position &p, RxSource src)

src/mesh/NodeDB.h

@@ -114,27 +114,6 @@ uint32_t sinceReceived(const meshtastic_MeshPacket *p);
 /// Returns defaultIfUnknown if the number of hops couldn't be determined.
 int8_t getHopsAway(const meshtastic_MeshPacket &p, int8_t defaultIfUnknown = -1);
 
-enum class HopStartStatus : uint8_t { VALID = 0, MISSING_OR_UNKNOWN, INVALID };
-
-/// Classify hop_start validity for forwarding decisions.
-HopStartStatus classifyHopStart(const meshtastic_MeshPacket &p);
-
-inline bool shouldDropPacketForPreHop(const meshtastic_MeshPacket &p)
-{
-#if !MESHTASTIC_PREHOP_DROP
-    (void)p;
-    return false;
-#else
-    if (isFromUs(&p)) {
-        return false; // local-originated packets should never be dropped by pre-hop drop policy
-    }
-    return classifyHopStart(p) != HopStartStatus::VALID;
-#endif
-}
-
-/// Rate-limited debug log when hop_start is invalid/missing and packet is dropped.
-void logHopStartDrop(const meshtastic_MeshPacket &p, const char *context);
-
 enum LoadFileResult {
     // Successfully opened the file
     LOAD_SUCCESS = 1,

src/mesh/PhoneAPI.cpp

@@ -465,11 +465,6 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf)
             fromRadioScratch.moduleConfig.which_payload_variant = meshtastic_ModuleConfig_paxcounter_tag;
             fromRadioScratch.moduleConfig.payload_variant.paxcounter = moduleConfig.paxcounter;
             break;
-        case meshtastic_ModuleConfig_traffic_management_tag:
-            LOG_DEBUG("Send module config: traffic management");
-            fromRadioScratch.moduleConfig.which_payload_variant = meshtastic_ModuleConfig_traffic_management_tag;
-            fromRadioScratch.moduleConfig.payload_variant.traffic_management = moduleConfig.traffic_management;
-            break;
         default:
             LOG_ERROR("Unknown module config type %d", config_state);
         }

src/mesh/RF95Interface.cpp

@@ -240,7 +240,8 @@ bool RF95Interface::reconfigure()
     if (err != RADIOLIB_ERR_NONE)
         RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
 
-    limitPower(RF95_MAX_POWER);
+    if (power > RF95_MAX_POWER) // This chip has lower power limits than some
+        power = RF95_MAX_POWER;
 
 #ifdef USE_RF95_RFO
     err = lora->setOutputPower(power, true);

src/mesh/RadioInterface.cpp

@@ -21,7 +21,6 @@
 #include <assert.h>
 #include <pb_decode.h>
 #include <pb_encode.h>
-#include <string.h>
 
 #ifdef ARCH_PORTDUINO
 #include "platform/portduino/PortduinoGlue.h"
@@ -33,32 +32,10 @@
 #include "STM32WLE5JCInterface.h"
 #endif
 
-static const meshtastic_Config_LoRaConfig_ModemPreset PRESETS_STD[] = {
-    meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST,     meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW,
-    meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW,   meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST,
-    meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW,    meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST,
-    meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE, meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO,
-    meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO,    MODEM_PRESET_END};
-
-static const meshtastic_Config_LoRaConfig_ModemPreset PRESETS_EU_868[] = {
-    meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST,     meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW,
-    meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW,   meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST,
-    meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW,    meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST,
-    meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE, MODEM_PRESET_END};
-
-static const meshtastic_Config_LoRaConfig_ModemPreset PRESETS_UNDEF[] = {meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST,
-                                                                         MODEM_PRESET_END};
-
-// Region profiles: bundle preset list + regulatory parameters shared across regions
-// presets, spacing, padding, audio, licensed, text throttle, position throttle, telemetry throttle, override slot
-const RegionProfile PROFILE_STD = {PRESETS_STD, 0, 0, true, false, 0, 0, 0, 0};
-const RegionProfile PROFILE_EU868 = {PRESETS_EU_868, 0, 0, false, false, 0, 0, 0, 0};
-const RegionProfile PROFILE_UNDEF = {PRESETS_UNDEF, 0, 0, true, false, 0, 0, 0, 0};
-
-#define RDEF(name, freq_start, freq_end, duty_cycle, power_limit, frequency_switching, wide_lora, profile_ptr)                   \
+#define RDEF(name, freq_start, freq_end, duty_cycle, spacing, power_limit, audio_permitted, frequency_switching, wide_lora)      \
     {                                                                                                                            \
-        meshtastic_Config_LoRaConfig_RegionCode_##name, freq_start, freq_end, duty_cycle, power_limit, frequency_switching,      \
-            wide_lora, &profile_ptr, #name                                                                                       \
+        meshtastic_Config_LoRaConfig_RegionCode_##name, freq_start, freq_end, duty_cycle, spacing, power_limit, audio_permitted, \
+            frequency_switching, wide_lora, #name                                                                                \
     }
 
 const RegionInfo regions[] = {
@@ -66,7 +43,7 @@ const RegionInfo regions[] = {
         https://link.springer.com/content/pdf/bbm%3A978-1-4842-4357-2%2F1.pdf
         https://www.thethingsnetwork.org/docs/lorawan/regional-parameters/
     */
-    RDEF(US, 902.0f, 928.0f, 100, 30, false, false, PROFILE_STD),
+    RDEF(US, 902.0f, 928.0f, 100, 0, 30, true, false, false),
 
     /*
         EN300220 ETSI V3.2.1 [Table B.1, Item H, p. 21]
@@ -74,7 +51,8 @@ const RegionInfo regions[] = {
         https://www.etsi.org/deliver/etsi_en/300200_300299/30022002/03.02.01_60/en_30022002v030201p.pdf
         FIXME: https://github.com/meshtastic/firmware/issues/3371
      */
-    RDEF(EU_433, 433.0f, 434.0f, 10, 10, false, false, PROFILE_STD),
+    RDEF(EU_433, 433.0f, 434.0f, 10, 0, 10, true, false, false),
+
     /*
        https://www.thethingsnetwork.org/docs/lorawan/duty-cycle/
        https://www.thethingsnetwork.org/docs/lorawan/regional-parameters/
@@ -89,33 +67,33 @@ const RegionInfo regions[] = {
        AFA) to avoid a duty cycle. (Please refer to line P page 22 of this document.)
        https://www.etsi.org/deliver/etsi_en/300200_300299/30022002/03.01.01_60/en_30022002v030101p.pdf
      */
-    RDEF(EU_868, 869.4f, 869.65f, 10, 27, false, false, PROFILE_EU868),
+    RDEF(EU_868, 869.4f, 869.65f, 10, 0, 27, false, false, false),
 
     /*
         https://lora-alliance.org/wp-content/uploads/2020/11/lorawan_regional_parameters_v1.0.3reva_0.pdf
      */
-    RDEF(CN, 470.0f, 510.0f, 100, 19, false, false, PROFILE_STD),
+    RDEF(CN, 470.0f, 510.0f, 100, 0, 19, true, false, false),
 
     /*
         https://lora-alliance.org/wp-content/uploads/2020/11/lorawan_regional_parameters_v1.0.3reva_0.pdf
         https://www.arib.or.jp/english/html/overview/doc/5-STD-T108v1_5-E1.pdf
         https://qiita.com/ammo0613/items/d952154f1195b64dc29f
      */
-    RDEF(JP, 920.5f, 923.5f, 100, 13, false, false, PROFILE_STD),
+    RDEF(JP, 920.5f, 923.5f, 100, 0, 13, true, false, false),
 
     /*
         https://www.iot.org.au/wp/wp-content/uploads/2016/12/IoTSpectrumFactSheet.pdf
         https://iotalliance.org.nz/wp-content/uploads/sites/4/2019/05/IoT-Spectrum-in-NZ-Briefing-Paper.pdf
         Also used in Brazil.
      */
-    RDEF(ANZ, 915.0f, 928.0f, 100, 30, false, false, PROFILE_STD),
+    RDEF(ANZ, 915.0f, 928.0f, 100, 0, 30, true, false, false),
 
     /*
         433.05 - 434.79 MHz, 25mW EIRP max, No duty cycle restrictions
         AU Low Interference Potential https://www.acma.gov.au/licences/low-interference-potential-devices-lipd-class-licence
         NZ General User Radio Licence for Short Range Devices https://gazette.govt.nz/notice/id/2022-go3100
      */
-    RDEF(ANZ_433, 433.05f, 434.79f, 100, 14, false, false, PROFILE_STD),
+    RDEF(ANZ_433, 433.05f, 434.79f, 100, 0, 14, true, false, false),
 
     /*
         https://digital.gov.ru/uploaded/files/prilozhenie-12-k-reshenyu-gkrch-18-46-03-1.pdf
@@ -123,13 +101,13 @@ const RegionInfo regions[] = {
         Note:
             - We do LBT, so 100% is allowed.
      */
-    RDEF(RU, 868.7f, 869.2f, 100, 20, false, false, PROFILE_STD),
+    RDEF(RU, 868.7f, 869.2f, 100, 0, 20, true, false, false),
 
     /*
         https://www.law.go.kr/LSW/admRulLsInfoP.do?admRulId=53943&efYd=0
         https://resources.lora-alliance.org/technical-specifications/rp002-1-0-4-regional-parameters
      */
-    RDEF(KR, 920.0f, 923.0f, 100, 23, false, false, PROFILE_STD),
+    RDEF(KR, 920.0f, 923.0f, 100, 0, 23, true, false, false),
 
     /*
         Taiwan, 920-925Mhz, limited to 0.5W indoor or coastal, 1.0W outdoor.
@@ -137,40 +115,44 @@ const RegionInfo regions[] = {
         https://www.ncc.gov.tw/english/files/23070/102_5190_230703_1_doc_C.PDF
         https://gazette.nat.gov.tw/egFront/e_detail.do?metaid=147283
      */
-    RDEF(TW, 920.0f, 925.0f, 100, 27, false, false, PROFILE_STD),
+    RDEF(TW, 920.0f, 925.0f, 100, 0, 27, true, false, false),
 
     /*
         https://lora-alliance.org/wp-content/uploads/2020/11/lorawan_regional_parameters_v1.0.3reva_0.pdf
      */
-    RDEF(IN, 865.0f, 867.0f, 100, 30, false, false, PROFILE_STD),
+    RDEF(IN, 865.0f, 867.0f, 100, 0, 30, true, false, false),
 
     /*
          https://rrf.rsm.govt.nz/smart-web/smart/page/-smart/domain/licence/LicenceSummary.wdk?id=219752
          https://iotalliance.org.nz/wp-content/uploads/sites/4/2019/05/IoT-Spectrum-in-NZ-Briefing-Paper.pdf
       */
-    RDEF(NZ_865, 864.0f, 868.0f, 100, 36, false, false, PROFILE_STD),
+    RDEF(NZ_865, 864.0f, 868.0f, 100, 0, 36, true, false, false),
 
     /*
        https://lora-alliance.org/wp-content/uploads/2020/11/lorawan_regional_parameters_v1.0.3reva_0.pdf
        https://standard.nbtc.go.th/getattachment/Standards/%E0%B8%A1%E0%B8%B2%E0%B8%95%E0%B8%A3%E0%B8%90%E0%B8%B2%E0%B8%99%E0%B8%97%E0%B8%B2%E0%B8%87%E0%B9%80%E0%B8%97%E0%B8%84%E0%B8%99%E0%B8%B4%E0%B8%84%E0%B8%82%E0%B8%AD%E0%B8%87%E0%B9%80%E0%B8%84%E0%B8%A3%E0%B8%B7%E0%B9%88%E0%B8%AD%E0%B8%87%E0%B9%82%E0%B8%97%E0%B8%A3%E0%B8%84%E0%B8%A1%E0%B8%99%E0%B8%B2%E0%B8%84%E0%B8%A1/1033-2565.pdf.aspx?lang=th-TH
        Thailand 920–925 MHz set max TX power to 27 dBm and enforce 10% duty cycle, aligned with NBTC regulations.
     */
-    RDEF(TH, 920.0f, 925.0f, 10, 27, false, false, PROFILE_STD),
+    RDEF(TH, 920.0f, 925.0f, 10, 0, 27, true, false, false),
 
     /*
         433,05-434,7 Mhz 10 mW
+        https://nkrzi.gov.ua/images/upload/256/5810/PDF_UUZ_19_01_2016.pdf
+    */
+    RDEF(UA_433, 433.0f, 434.7f, 10, 0, 10, true, false, false),
+
+    /*
         868,0-868,6 Mhz 25 mW
         https://nkrzi.gov.ua/images/upload/256/5810/PDF_UUZ_19_01_2016.pdf
     */
-    RDEF(UA_433, 433.0f, 434.7f, 10, 10, false, false, PROFILE_STD),
-    RDEF(UA_868, 868.0f, 868.6f, 1, 14, false, false, PROFILE_STD),
+    RDEF(UA_868, 868.0f, 868.6f, 1, 0, 14, true, false, false),
 
     /*
         Malaysia
         433 - 435 MHz at 100mW, no restrictions.
         https://www.mcmc.gov.my/skmmgovmy/media/General/pdf/Short-Range-Devices-Specification.pdf
     */
-    RDEF(MY_433, 433.0f, 435.0f, 100, 20, false, false, PROFILE_STD),
+    RDEF(MY_433, 433.0f, 435.0f, 100, 0, 20, true, false, false),
 
     /*
         Malaysia
@@ -179,14 +161,14 @@ const RegionInfo regions[] = {
         Frequency hopping is used for 919 - 923 MHz.
         https://www.mcmc.gov.my/skmmgovmy/media/General/pdf/Short-Range-Devices-Specification.pdf
     */
-    RDEF(MY_919, 919.0f, 924.0f, 100, 27, true, false, PROFILE_STD),
+    RDEF(MY_919, 919.0f, 924.0f, 100, 0, 27, true, true, false),
 
     /*
         Singapore
         SG_923 Band 30d: 917 - 925 MHz at 100mW, no restrictions.
         https://www.imda.gov.sg/-/media/imda/files/regulation-licensing-and-consultations/ict-standards/telecommunication-standards/radio-comms/imdatssrd.pdf
     */
-    RDEF(SG_923, 917.0f, 925.0f, 100, 20, false, false, PROFILE_STD),
+    RDEF(SG_923, 917.0f, 925.0f, 100, 0, 20, true, false, false),
 
     /*
         Philippines
@@ -196,9 +178,8 @@ const RegionInfo regions[] = {
                 https://github.com/meshtastic/firmware/issues/4948#issuecomment-2394926135
     */
 
-    RDEF(PH_433, 433.0f, 434.7f, 100, 10, false, false, PROFILE_STD),
-    RDEF(PH_868, 868.0f, 869.4f, 100, 14, false, false, PROFILE_STD),
-    RDEF(PH_915, 915.0f, 918.0f, 100, 24, false, false, PROFILE_STD),
+    RDEF(PH_433, 433.0f, 434.7f, 100, 0, 10, true, false, false), RDEF(PH_868, 868.0f, 869.4f, 100, 0, 14, true, false, false),
+    RDEF(PH_915, 915.0f, 918.0f, 100, 0, 24, true, false, false),
 
     /*
         Kazakhstan
@@ -206,38 +187,37 @@ const RegionInfo regions[] = {
                 863 - 868 MHz <25 mW EIRP, 500kHz channels allowed, must not be used at airfields
                                 https://github.com/meshtastic/firmware/issues/7204
     */
-    RDEF(KZ_433, 433.075f, 434.775f, 100, 10, false, false, PROFILE_STD),
-    RDEF(KZ_863, 863.0f, 868.0f, 100, 30, false, false, PROFILE_STD),
+    RDEF(KZ_433, 433.075f, 434.775f, 100, 0, 10, true, false, false),
+    RDEF(KZ_863, 863.0f, 868.0f, 100, 0, 30, true, false, false),
 
     /*
         Nepal
         865 MHz to 868 MHz frequency band for IoT (Internet of Things), M2M (Machine-to-Machine), and smart metering use,
        specifically in non-cellular mode. https://www.nta.gov.np/uploads/contents/Radio-Frequency-Policy-2080-English.pdf
     */
-    RDEF(NP_865, 865.0f, 868.0f, 100, 30, false, false, PROFILE_STD),
+    RDEF(NP_865, 865.0f, 868.0f, 100, 0, 30, true, false, false),
 
     /*
         Brazil
         902 - 907.5 MHz , 1W power limit, no duty cycle restrictions
         https://github.com/meshtastic/firmware/issues/3741
     */
-    RDEF(BR_902, 902.0f, 907.5f, 100, 30, false, false, PROFILE_STD),
+    RDEF(BR_902, 902.0f, 907.5f, 100, 0, 30, true, false, false),
 
     /*
        2.4 GHZ WLAN Band equivalent. Only for SX128x chips.
     */
-    RDEF(LORA_24, 2400.0f, 2483.5f, 100, 10, false, true, PROFILE_STD),
+    RDEF(LORA_24, 2400.0f, 2483.5f, 100, 0, 10, true, false, true),
 
     /*
         This needs to be last. Same as US.
     */
-    RDEF(UNSET, 902.0f, 928.0f, 100, 30, false, false, PROFILE_UNDEF)
+    RDEF(UNSET, 902.0f, 928.0f, 100, 0, 30, true, false, false)
 
 };
 
 const RegionInfo *myRegion;
 bool RadioInterface::uses_default_frequency_slot = true;
-bool RadioInterface::uses_custom_channel_name = false;
 
 static uint8_t bytes[MAX_LORA_PAYLOAD_LEN + 1];
 
@@ -523,14 +503,45 @@ void initRegion()
     myRegion = r;
 }
 
-const RegionInfo *getRegion(meshtastic_Config_LoRaConfig_RegionCode code)
+void RadioInterface::bootstrapLoRaConfigFromPreset(meshtastic_Config_LoRaConfig &loraConfig)
 {
+    if (!loraConfig.use_preset) {
+        return;
+    }
+
+    // Find region info to determine whether "wide" LoRa is permitted (2.4 GHz uses wider bandwidth codes).
     const RegionInfo *r = regions;
-    for (; r->code != meshtastic_Config_LoRaConfig_RegionCode_UNSET && r->code != code; r++)
+    for (; r->code != meshtastic_Config_LoRaConfig_RegionCode_UNSET && r->code != loraConfig.region; r++)
         ;
-    return r;
+
+    const bool regionWideLora = r->wideLora;
+
+    float bwKHz = 0;
+    uint8_t sf = 0;
+    uint8_t cr = 0;
+    modemPresetToParams(loraConfig.modem_preset, regionWideLora, bwKHz, sf, cr);
+
+    // If selected preset requests a bandwidth larger than the region span, fall back to LONG_FAST.
+    if (r->code != meshtastic_Config_LoRaConfig_RegionCode_UNSET && (r->freqEnd - r->freqStart) < (bwKHz / 1000.0f)) {
+        loraConfig.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
+        modemPresetToParams(loraConfig.modem_preset, regionWideLora, bwKHz, sf, cr);
+    }
+
+    loraConfig.bandwidth = bwKHzToCode(bwKHz);
+    loraConfig.spread_factor = sf;
 }
 
+/**
+ * ## LoRaWAN for North America
+
+LoRaWAN defines 64, 125 kHz channels from 902.3 to 914.9 MHz increments.
+
+The maximum output power for North America is +30 dBM.
+
+The band is from 902 to 928 MHz. It mentions channel number and its respective channel frequency. All the 13 channels are
+separated by 2.16 MHz with respect to the adjacent channels. Channel zero starts at 903.08 MHz center frequency.
+*/
+
 uint32_t RadioInterface::getPacketTime(const meshtastic_MeshPacket *p, bool received)
 {
     uint32_t pl = 0;
@@ -740,7 +751,7 @@ void RadioInterface::saveFreq(float freq)
 }
 
 /**
- * Save our frequency slot (aka channel) for later reuse.
+ * Save our channel for later reuse.
  */
 void RadioInterface::saveChannelNum(uint32_t channel_num)
 {
@@ -763,304 +774,113 @@ uint32_t RadioInterface::getChannelNum()
     return savedChannelNum;
 }
 
-/**
- * Send an error-level client notification. Safe to call when service is null (e.g. in tests).
- */
-static void sendErrorNotification(const char *msg)
-{
-    if (!service)
-        return;
-    meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
-    if (!cn)
-        return;
-    cn->level = meshtastic_LogRecord_Level_ERROR;
-    snprintf(cn->message, sizeof(cn->message), "%s", msg);
-    service->sendClientNotification(cn);
-}
-
-/**
- * Checks if a region is valid for the current settings.
- * Returns false if not compatible.
- */
-bool RadioInterface::validateConfigRegion(const meshtastic_Config_LoRaConfig &loraConfig)
-{
-    const RegionInfo *newRegion = getRegion(loraConfig.region);
-
-    // If you are not licensed, you can't use ham regions.
-    if (newRegion->profile->licensedOnly && !devicestate.owner.is_licensed) {
-        char err_string[160];
-        snprintf(err_string, sizeof(err_string), "Region %s requires licensed mode", newRegion->name);
-        LOG_ERROR("%s", err_string);
-        RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
-        sendErrorNotification(err_string);
-        return false;
-    }
-
-    return true;
-}
-
-/**
- * Internal helper: validate or clamp a LoRa config against its region.
- * When clamp==false, returns false on first error (pure validation).
- * When clamp==true, fixes invalid settings in-place and returns true.
- */
-bool RadioInterface::checkOrClampConfigLora(meshtastic_Config_LoRaConfig &loraConfig, bool clamp)
-{
-    char err_string[160];
-    float check_bw;
-
-    const RegionInfo *newRegion = getRegion(loraConfig.region);
-
-    const char *presetName = DisplayFormatters::getModemPresetDisplayName(loraConfig.modem_preset, false, loraConfig.use_preset);
-
-    // Check preset validity (only when use_preset is true)
-    if (loraConfig.use_preset) {
-        check_bw = modemPresetToBwKHz(loraConfig.modem_preset, newRegion->wideLora);
-
-        bool preset_valid = false;
-        for (size_t i = 0; i < newRegion->getNumPresets(); i++) {
-            if (loraConfig.modem_preset == newRegion->getAvailablePresets()[i]) {
-                preset_valid = true;
-                break;
-            }
-        }
-        if (!preset_valid) {
-            const char *defaultName = DisplayFormatters::getModemPresetDisplayName(newRegion->getDefaultPreset(), false, true);
-            if (clamp) {
-                snprintf(err_string, sizeof(err_string), "Preset %s invalid for %s, using %s", presetName, newRegion->name,
-                         defaultName);
-            } else {
-                snprintf(err_string, sizeof(err_string), "Preset %s invalid for %s", presetName, newRegion->name);
-            }
-            LOG_ERROR("%s", err_string);
-            RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
-            sendErrorNotification(err_string);
-
-            if (clamp) {
-                loraConfig.modem_preset = newRegion->getDefaultPreset();
-                check_bw = modemPresetToBwKHz(loraConfig.modem_preset, newRegion->wideLora);
-            } else {
-                return false;
-            }
-        }
-    } else {
-        check_bw = bwCodeToKHz(loraConfig.bandwidth);
-    }
-
-    // Calculate width of slots (aka channels) based on bandwidth and any spacing or padding required by the region:
-    // spacing = gap between slots (0 for continuous spectrum) and at the beginning of the band
-    // padding = gap at the beginning and end of the slots (0 for no padding)
-    float freqSlotWidth = newRegion->profile->spacing + (newRegion->profile->padding * 2) + (check_bw / 1000); // in MHz
-    uint32_t numFreqSlots = round((newRegion->freqEnd - newRegion->freqStart + newRegion->profile->spacing) / freqSlotWidth);
-
-    // Check if the region supports the requested bandwidth
-    if ((newRegion->freqEnd - newRegion->freqStart) < freqSlotWidth) {
-        const float regionSpanKHz = (newRegion->freqEnd - newRegion->freqStart) * 1000.0f;
-        snprintf(err_string, sizeof(err_string), "%s span %.0fkHz < requested %.0fkHz", newRegion->name, regionSpanKHz, check_bw);
-        LOG_ERROR("%s", err_string);
-        RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
-        sendErrorNotification(err_string);
-
-        if (clamp) {
-            loraConfig.bandwidth = bwKHzToCode(modemPresetToBwKHz(newRegion->getDefaultPreset(), newRegion->wideLora));
-            check_bw = bwCodeToKHz(loraConfig.bandwidth);
-
-            // Recompute slot width and number of slots based on the new bandwidth
-            freqSlotWidth = newRegion->profile->spacing + (newRegion->profile->padding * 2) + (check_bw / 1000); // in MHz
-            numFreqSlots = round((newRegion->freqEnd - newRegion->freqStart + newRegion->profile->spacing) / freqSlotWidth);
-        } else {
-            return false;
-        }
-    }
-
-    const char *channelName = channels.getName(channels.getPrimaryIndex());
-    const char *presetNameDisplay =
-        DisplayFormatters::getModemPresetDisplayName(loraConfig.modem_preset, false, loraConfig.use_preset);
-    uint32_t channelNameHashSlot = hash(channelName) % numFreqSlots;
-    uint32_t presetNameHashSlot = hash(presetNameDisplay) % numFreqSlots;
-
-    if (loraConfig.override_frequency == 0) {
-
-        // Check if we use the default frequency slot
-        uses_default_frequency_slot =
-            (loraConfig.channel_num == 0) || // user choice unset, no frequency override, so use default
-            (newRegion->profile->overrideSlot != 0 &&
-             loraConfig.channel_num == newRegion->profile->overrideSlot) || // user setting matches override
-            ((newRegion->profile->overrideSlot == 0) &&
-             ((uint32_t)(loraConfig.channel_num - 1) == presetNameHashSlot)); // user setting matches preset hash, no override
-
-        // check if user setting different to preset name
-        uses_custom_channel_name = (strcmp(channelName, presetNameDisplay) != 0);
-
-        if (loraConfig.channel_num > numFreqSlots) {
-            snprintf(err_string, sizeof(err_string), "Channel number %u invalid for %s, max is %u", loraConfig.channel_num,
-                     newRegion->name, numFreqSlots);
-            LOG_ERROR("%s", err_string);
-            RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
-            sendErrorNotification(err_string);
-
-            if (clamp) {
-                if (uses_custom_channel_name) { // clamp to channel name hash
-                    loraConfig.channel_num =
-                        channelNameHashSlot + 1; // channel_num is 1-based, but hash slot is 0-based, so add 1
-                } else if ((loraConfig.use_preset) && (newRegion->profile->overrideSlot != 0)) { // clamp to preset override slot
-                    loraConfig.channel_num =
-                        newRegion->profile->overrideSlot; // use the override slot specified by the region profile
-                    uses_default_frequency_slot = true;
-                } else if (loraConfig.use_preset) {                  // clamp to preset slot
-                    loraConfig.channel_num = presetNameHashSlot + 1; // channel_num is 1-based, but hash slot is 0-based, so add 1
-                    uses_default_frequency_slot = true;
-                } else { // if not using preset, and no custom channel name, just clamp to default anyway
-                    uses_default_frequency_slot = true;
-                };
-            } else {
-                return false;
-            }
-        } // end of channel number check
-    } else {
-        // if we have a frequency override, we ignore the channel number and just use the override frequency
-        snprintf(err_string, sizeof(err_string), "Frequency override in place, using %.3f", loraConfig.override_frequency);
-    }
-    return true;
-}
-
-bool RadioInterface::validateConfigLora(const meshtastic_Config_LoRaConfig &loraConfig)
-{
-    auto copy = loraConfig;
-    return checkOrClampConfigLora(copy, false);
-}
-
-void RadioInterface::clampConfigLora(meshtastic_Config_LoRaConfig &loraConfig)
-{
-    checkOrClampConfigLora(loraConfig, true);
-}
-
 /**
  * Pull our channel settings etc... from protobufs to the dumb interface settings
- * Note: this must be given only settings which have been validated or clamped!
  */
 void RadioInterface::applyModemConfig()
 {
     // Set up default configuration
     // No Sync Words in LORA mode
     meshtastic_Config_LoRaConfig &loraConfig = config.lora;
-    const RegionInfo *newRegion = getRegion(loraConfig.region);
-    myRegion = newRegion;
-
-    if (loraConfig.use_preset) {
-        if (!validateConfigLora(loraConfig)) {
-            loraConfig.modem_preset = newRegion->getDefaultPreset();
-        }
-        uint8_t newcr;
-        modemPresetToParams(loraConfig.modem_preset, newRegion->wideLora, bw, sf, newcr);
-        // If custom CR is being used already, check if the new preset is higher
-        if (loraConfig.coding_rate >= 5 && loraConfig.coding_rate <= 8 && loraConfig.coding_rate < newcr) {
-            cr = newcr;
-            LOG_INFO("Default Coding Rate is higher than custom setting, using %u", cr);
-        }
-        // If the custom CR is higher than the preset, use it
-        else if (loraConfig.coding_rate >= 5 && loraConfig.coding_rate <= 8 && loraConfig.coding_rate > newcr) {
+    bool validConfig = false; // We need to check for a valid configuration
+    while (!validConfig) {
+        if (loraConfig.use_preset) {
+            modemPresetToParams(loraConfig.modem_preset, myRegion->wideLora, bw, sf, cr);
+            if (loraConfig.coding_rate >= 5 && loraConfig.coding_rate <= 8 && loraConfig.coding_rate != cr) {
+                cr = loraConfig.coding_rate;
+                LOG_INFO("Using custom Coding Rate %u", cr);
+            }
+        } else {
+            sf = loraConfig.spread_factor;
             cr = loraConfig.coding_rate;
-            LOG_INFO("Using custom Coding Rate %u", cr);
-        } else {
-            cr = newcr;
+            bw = bwCodeToKHz(loraConfig.bandwidth);
         }
 
-    } else { // if not using preset, then just use the custom settings
-        if (validateConfigLora(loraConfig)) {
+        if ((myRegion->freqEnd - myRegion->freqStart) < bw / 1000) {
+            const float regionSpanKHz = (myRegion->freqEnd - myRegion->freqStart) * 1000.0f;
+            const float requestedBwKHz = bw;
+            const bool isWideRequest = requestedBwKHz >= 499.5f; // treat as 500 kHz preset
+            const char *presetName =
+                DisplayFormatters::getModemPresetDisplayName(loraConfig.modem_preset, false, loraConfig.use_preset);
+
+            char err_string[160];
+            if (isWideRequest) {
+                snprintf(err_string, sizeof(err_string), "%s region too narrow for 500kHz preset (%s). Falling back to LongFast.",
+                         myRegion->name, presetName);
+            } else {
+                snprintf(err_string, sizeof(err_string), "%s region span %.0fkHz < requested %.0fkHz. Falling back to LongFast.",
+                         myRegion->name, regionSpanKHz, requestedBwKHz);
+            }
+            LOG_ERROR("%s", err_string);
+            RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
+
+            meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
+            cn->level = meshtastic_LogRecord_Level_ERROR;
+            snprintf(cn->message, sizeof(cn->message), "%s", err_string);
+            service->sendClientNotification(cn);
+
+            // Set to default modem preset
+            loraConfig.use_preset = true;
+            loraConfig.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
         } else {
-            LOG_WARN("Invalid LoRa config settings, cannot apply requested modem config - falling back to %s defaults",
-                     newRegion->name);
-            clampConfigLora(loraConfig);
+            validConfig = true;
         }
-        bw = bwCodeToKHz(loraConfig.bandwidth);
-        sf = loraConfig.spread_factor;
-        cr = loraConfig.coding_rate;
     }
 
     power = loraConfig.tx_power;
 
-    if ((power == 0) || ((power > newRegion->powerLimit) && !devicestate.owner.is_licensed))
-        power = newRegion->powerLimit;
+    if ((power == 0) || ((power > myRegion->powerLimit) && !devicestate.owner.is_licensed))
+        power = myRegion->powerLimit;
 
     if (power == 0)
-        power = 17; // Default to this power level if we don't have a valid regional power limit (powerLimit of newRegion defaults
+        power = 17; // Default to this power level if we don't have a valid regional power limit (powerLimit of myRegion defaults
                     // to 0, currently no region has an actual power limit of 0 [dBm] so we can assume regions which have this
                     // variable set to 0 don't have a valid power limit)
 
     // Set final tx_power back onto config
     loraConfig.tx_power = (int8_t)power; // cppcheck-suppress assignmentAddressToInteger
 
-    uint32_t channel_num;
-    float freq;
+    // Calculate the number of channels
+    uint32_t numChannels = floor((myRegion->freqEnd - myRegion->freqStart) / (myRegion->spacing + (bw / 1000)));
 
-    // Calculate number of frequency slots (aka Channels):
-    // spacing = gap between channels (0 for continuous spectrum) and at the beginning of the band
-    // padding = gap at the beginning and end of the channel (0 for no padding)
-    float freqSlotWidth = newRegion->profile->spacing + (newRegion->profile->padding * 2) + (bw / 1000); // in MHz
-    uint32_t numFreqSlots = round((newRegion->freqEnd - newRegion->freqStart + newRegion->profile->spacing) / freqSlotWidth);
+    // If user has manually specified a channel num, then use that, otherwise generate one by hashing the name
+    const char *channelName = channels.getName(channels.getPrimaryIndex());
+    // channel_num is actually (channel_num - 1), since modulus (%) returns values from 0 to (numChannels - 1)
+    uint32_t channel_num = (loraConfig.channel_num ? loraConfig.channel_num - 1 : hash(channelName)) % numChannels;
 
-    // Calculate hash of channel name and preset name to pick a default frequency slot if user has not specified one.
-    // Note that channel_num is actually (channel_num - 1), i.e. zero-based, since modulus (%) returns values from 0 to
-    // (numFreqSlots - 1).
-    uint32_t presetNameHashSlot =
-        hash(DisplayFormatters::getModemPresetDisplayName(loraConfig.modem_preset, false, loraConfig.use_preset)) % numFreqSlots;
+    // Check if we use the default frequency slot
+    RadioInterface::uses_default_frequency_slot =
+        channel_num ==
+        hash(DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset)) % numChannels;
+
+    // Old frequency selection formula
+    // float freq = myRegion->freqStart + ((((myRegion->freqEnd - myRegion->freqStart) / numChannels) / 2) * channel_num);
+
+    // New frequency selection formula
+    float freq = myRegion->freqStart + (bw / 2000) + (channel_num * (bw / 1000));
 
     // override if we have a verbatim frequency
     if (loraConfig.override_frequency) {
         freq = loraConfig.override_frequency;
         channel_num = -1;
-        uses_default_frequency_slot = false;
-    } else {
-
-        // If user has not manually specified a frequency slot, or has not specified one that is different than the default or the
-        // override for the new region, then use the default or override. If the user has not specified one, but has specified a
-        // custom channel name, then use the hash of that channel name to pick a frequency slot. Note that channel_num is actually
-        // (channel_num - 1), i.e. zero-based, since modulus (%) returns values from 0 to (numFreqSlots - 1).
-        // NB: channel_num is also know as frequency slot but it's too late to fix now.
-        if (uses_default_frequency_slot) {
-            // if there's an override slot, use that
-            if (newRegion->profile->overrideSlot != 0) {
-                channel_num = newRegion->profile->overrideSlot - 1;
-            } else {
-                channel_num = presetNameHashSlot;
-            }
-        } else { // use the manually defined one
-            channel_num = loraConfig.channel_num - 1;
-        }
-
-        // Calculate frequency: freqStart is band edge, add half bandwidth (plus optional padding) to get middle of first channel
-        // subsequent channels are spaced by freqSlotWidth
-        freq = newRegion->freqStart + (bw / 2000) + newRegion->profile->padding + (channel_num * freqSlotWidth); // in MHz
     }
 
     saveChannelNum(channel_num);
     saveFreq(freq + loraConfig.frequency_offset);
-    const char *channelName = channels.getName(channels.getPrimaryIndex());
-
-    if (newRegion->wideLora) {                          // clamp if wide freq range
-        preambleLength = wideLoraPreambleLengthDefault; // 12 is the default for operation above 2GHz
-    } else {
-        preambleLength =
-            preambleLengthDefault; // 8 is default, but we use longer to increase the amount of sleep time when receiving
-    }
 
     slotTimeMsec = computeSlotTimeMsec();
     preambleTimeMsec = preambleLength * (pow_of_2(sf) / bw);
 
     LOG_INFO("Radio freq=%.3f, config.lora.frequency_offset=%.3f", freq, loraConfig.frequency_offset);
-    LOG_INFO("Set radio: region=%s, name=%s, config=%u, ch=%d, power=%d", newRegion->name, channelName, loraConfig.modem_preset,
+    LOG_INFO("Set radio: region=%s, name=%s, config=%u, ch=%d, power=%d", myRegion->name, channelName, loraConfig.modem_preset,
              channel_num, power);
-    LOG_INFO("newRegion->freqStart -> newRegion->freqEnd: %f -> %f (%f MHz)", newRegion->freqStart, newRegion->freqEnd,
-             newRegion->freqEnd - newRegion->freqStart);
-    LOG_INFO("numFreqSlots: %d x %.3fkHz", numFreqSlots, bw);
-    if (newRegion->profile->overrideSlot != 0) {
-        LOG_INFO("Using region override slot: %d", newRegion->profile->overrideSlot);
-    }
+    LOG_INFO("myRegion->freqStart -> myRegion->freqEnd: %f -> %f (%f MHz)", myRegion->freqStart, myRegion->freqEnd,
+             myRegion->freqEnd - myRegion->freqStart);
+    LOG_INFO("numChannels: %d x %.3fkHz", numChannels, bw);
     LOG_INFO("channel_num: %d", channel_num + 1);
     LOG_INFO("frequency: %f", getFreq());
     LOG_INFO("Slot time: %u msec, preamble time: %u msec", slotTimeMsec, preambleTimeMsec);
-} // end of applyModemConfig
+}
 
 /** Slottime is the time to detect a transmission has started, consisting of:
   - CAD duration;
@@ -1174,4 +994,4 @@ size_t RadioInterface::beginSending(meshtastic_MeshPacket *p)
 
     sendingPacket = p;
     return p->encrypted.size + sizeof(PacketHeader);
-}
+}

src/mesh/RadioInterface.h

@@ -92,20 +92,15 @@ class RadioInterface
     uint8_t sf = 9;
     uint8_t cr = 5;
 
-    static constexpr uint8_t NUM_SYM_CAD =
-        2; // Number of symbols used for CAD, 2 is the default since RadioLib 6.3.0 as per AN1200.48
-    static constexpr uint8_t NUM_SYM_CAD_24GHZ =
-        4; // Number of symbols used for CAD in 2.4 GHz, 4 is recommended in AN1200.22 of SX1280
+    const uint8_t NUM_SYM_CAD = 2;       // Number of symbols used for CAD, 2 is the default since RadioLib 6.3.0 as per AN1200.48
+    const uint8_t NUM_SYM_CAD_24GHZ = 4; // Number of symbols used for CAD in 2.4 GHz, 4 is recommended in AN1200.22 of SX1280
     uint32_t slotTimeMsec = computeSlotTimeMsec();
-    uint16_t preambleLength = 16; // 8 is default, but we use longer to increase the amount of sleep time when receiving
-    static constexpr uint16_t preambleLengthDefault =
-        16; // 8 is default, but we use longer to increase the amount of sleep time when receiving
-    static constexpr uint16_t wideLoraPreambleLengthDefault = 12; // 12 is default for wide Lora
-    uint32_t preambleTimeMsec = 165;                              // calculated on startup, this is the default for LongFast
-    static constexpr uint32_t PROCESSING_TIME_MSEC =
-        4500;                           // time to construct, process and construct a packet again (empirically determined)
-    static constexpr uint8_t CWmin = 3; // minimum CWsize
-    static constexpr uint8_t CWmax = 8; // maximum CWsize
+    uint16_t preambleLength = 16;    // 8 is default, but we use longer to increase the amount of sleep time when receiving
+    uint32_t preambleTimeMsec = 165; // calculated on startup, this is the default for LongFast
+    const uint32_t PROCESSING_TIME_MSEC =
+        4500;                // time to construct, process and construct a packet again (empirically determined)
+    const uint8_t CWmin = 3; // minimum CWsize
+    const uint8_t CWmax = 8; // maximum CWsize
 
     meshtastic_MeshPacket *sendingPacket = NULL; // The packet we are currently sending
     uint32_t lastTxStart = 0L;
@@ -132,7 +127,7 @@ class RadioInterface
      * Coerce LoRa config fields (bandwidth/spread_factor) derived from presets.
      * This is used during early bootstrapping so UIs that display these fields directly remain consistent.
      */
-    // static void bootstrapLoRaConfigFromPreset(meshtastic_Config_LoRaConfig &loraConfig); // maybe superseded?
+    static void bootstrapLoRaConfigFromPreset(meshtastic_Config_LoRaConfig &loraConfig);
 
     /**
      * Return true if we think the board can go to sleep (i.e. our tx queue is empty, we are not sending or receiving)
@@ -239,20 +234,6 @@ class RadioInterface
     // Whether we use the default frequency slot given our LoRa config (region and modem preset)
     static bool uses_default_frequency_slot;
 
-    // Whether we have a custom channel name
-    static bool uses_custom_channel_name;
-
-    static bool checkOrClampConfigLora(meshtastic_Config_LoRaConfig &loraConfig, bool clamp);
-
-    // Check if a candidate region is compatible and valid.
-    static bool validateConfigRegion(const meshtastic_Config_LoRaConfig &loraConfig);
-
-    // Check if a candidate radio configuration is valid.
-    static bool validateConfigLora(const meshtastic_Config_LoRaConfig &loraConfig);
-
-    // Make a candidate radio configuration valid, even if it isn't.
-    static void clampConfigLora(meshtastic_Config_LoRaConfig &loraConfig);
-
   protected:
     int8_t power = 17; // Set by applyModemConfig()
 

src/mesh/Router.cpp

@@ -11,9 +11,6 @@
 #include "mesh-pb-constants.h"
 #include "meshUtils.h"
 #include "modules/RoutingModule.h"
-#if HAS_TRAFFIC_MANAGEMENT
-#include "modules/TrafficManagementModule.h"
-#endif
 #if !MESHTASTIC_EXCLUDE_MQTT
 #include "mqtt/MQTT.h"
 #endif
@@ -98,20 +95,6 @@ bool Router::shouldDecrementHopLimit(const meshtastic_MeshPacket *p)
         return true;
     }
 
-#if HAS_TRAFFIC_MANAGEMENT
-    // When router_preserve_hops is enabled, preserve hops for decoded packets that are not
-    // position or telemetry (those have their own exhaust_hop controls).
-    if (moduleConfig.has_traffic_management && moduleConfig.traffic_management.enabled &&
-        moduleConfig.traffic_management.router_preserve_hops && p->which_payload_variant == meshtastic_MeshPacket_decoded_tag &&
-        p->decoded.portnum != meshtastic_PortNum_POSITION_APP && p->decoded.portnum != meshtastic_PortNum_TELEMETRY_APP) {
-        LOG_DEBUG("Router hop preserved: port=%d from=0x%08x (traffic_management)", p->decoded.portnum, getFrom(p));
-        if (trafficManagementModule) {
-            trafficManagementModule->recordRouterHopPreserved();
-        }
-        return false;
-    }
-#endif
-
     // For subsequent hops, check if previous relay is a favorite router
     // Optimized search for favorite routers with matching last byte
     // Check ordering optimized for IoT devices (cheapest checks first)
@@ -875,12 +858,6 @@ void Router::perhapsHandleReceived(meshtastic_MeshPacket *p)
         return;
     }
 
-    if (shouldDropPacketForPreHop(*p)) {
-        logHopStartDrop(*p, "pre-hop drop");
-        packetPool.release(p);
-        return;
-    }
-
     if (shouldFilterReceived(p)) {
         LOG_DEBUG("Incoming msg was filtered from 0x%x", p->from);
         packetPool.release(p);

src/mesh/SX126xInterface.cpp

@@ -245,21 +245,14 @@ template <typename T> bool SX126xInterface<T>::reconfigure()
     if (err != RADIOLIB_ERR_NONE)
         RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
 
-    limitPower(SX126X_MAX_POWER);
-    // Make sure we reach the minimum power supported to turn the chip on (-9dBm)
-    if (power < -9)
-        power = -9;
+    if (power > SX126X_MAX_POWER) // This chip has lower power limits than some
+        power = SX126X_MAX_POWER;
 
     err = lora.setOutputPower(power);
     if (err != RADIOLIB_ERR_NONE)
         LOG_ERROR("SX126X setOutputPower %s%d", radioLibErr, err);
     assert(err == RADIOLIB_ERR_NONE);
 
-    // Apply RX gain mode — valid in STDBY (datasheet §9.6), matches resetAGC() pattern
-    err = lora.setRxBoostedGainMode(config.lora.sx126x_rx_boosted_gain);
-    if (err != RADIOLIB_ERR_NONE)
-        LOG_WARN("SX126X setRxBoostedGainMode %s%d", radioLibErr, err);
-
     startReceive(); // restart receiving
 
     return RADIOLIB_ERR_NONE;
@@ -455,6 +448,15 @@ template <typename T> void SX126xInterface<T>::resetAGC()
     // RX boosted gain mode
     lora.setRxBoostedGainMode(config.lora.sx126x_rx_boosted_gain);
 
+    // Re-apply the undocumented 0x8B5 RX sensitivity patch that was set in init().
+    // The CALIBRATE_ALL (0x7F) command above clears bit 0 of register 0x8B5, which
+    // silently removes the RX sensitivity improvement introduced in #9571 / #9777.
+    // Without this re-apply, every SX1262 node loses its RX boost ~60s after boot
+    // and never recovers until reboot. See empirical evidence in the PR description.
+    if (module.SPIsetRegValue(0x8B5, 0x01, 0, 0) != RADIOLIB_ERR_NONE) {
+        LOG_WARN("SX126x resetAGC: failed to re-apply 0x8B5 RX sensitivity patch");
+    }
+
     // 6. Resume receiving
     startReceive();
 }

src/mesh/SX128xInterface.cpp

@@ -144,7 +144,8 @@ template <typename T> bool SX128xInterface<T>::reconfigure()
     if (err != RADIOLIB_ERR_NONE)
         RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
 
-    limitPower(SX128X_MAX_POWER);
+    if (power > SX128X_MAX_POWER) // This chip has lower power limits than some
+        power = SX128X_MAX_POWER;
 
     err = lora.setOutputPower(power);
     if (err != RADIOLIB_ERR_NONE)